Apprentice Resume Samples

4.8 (58 votes) for Apprentice Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the apprentice job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
EJ
E Jacobs
Eriberto
Jacobs
44823 Grimes Pass
Dallas
TX
+1 (555) 824 9614
44823 Grimes Pass
Dallas
TX
Phone
p +1 (555) 824 9614
Experience Experience
08/2015 present
New York, NY
Tool & Die Apprentice
New York, NY
Tool & Die Apprentice
08/2015 present
New York, NY
Tool & Die Apprentice
08/2015 present
  • Assist with the development of work standards for tool PM
  • Work on new experimental cutting tools working with production and manufacturing engineering staff personnel
  • Assist toolmakers in production run
  • Provide support in troubleshooting/repairs and system improvements
  • Utilizing precision diametric fits and other development work for such hardware
  • Verify conformance of repaired dies to specifications by checking dimensions, clearances and alignments, consistently working to close tolerances
  • Operate a variety of machine tools to cut, mill, grind or otherwise repair work piece to prescribed dimensions and finish
12/2008 04/2015
Detroit, MI
Maintenance Apprentice
Detroit, MI
Maintenance Apprentice
12/2008 04/2015
Detroit, MI
Maintenance Apprentice
12/2008 04/2015
  • The Apprentice will report to the Maintenance Team Leader for all the technical information relating to the maintenance of the plant equipment and procedures
  • O As directed, completes emergency, preventive and predictive maintenance tasks
  • Completes emergency, preventive and predictive maintenance tasks
  • Troubleshoots mechanical breakdown situations in order to eliminate future occurrences
  • Performs a wide range of operations connected with maintenance, repair and installation of equipment and mechanical lines (water, gas, air, etc.)
  • Maintains work area, shop floor and equipment in a neat, clean and orderly condition
  • Strives to eliminate any unscheduled equipment downtime
08/2005 09/2008
Detroit, MI
Apprentice
Detroit, MI
Apprentice
08/2005 09/2008
Detroit, MI
Apprentice
08/2005 09/2008
  • Assist Journeymen class with performing distribution switching, documentation and mapping information, and perform other related duties as assigned
  • Provide support to the Security Incident Management Response process, assist with investigations, ensuring clear audit trails of issues and resolutions
  • Work cooperatively as a team member and provide guidance to NGA analysts to build effective customer relationships
  • Assist in developing and/or updating preventative maintenance procedures
  • Proactively identify opportunities to help improve group performance
  • To assist with the development of new plating methods with clearly defined control specifications
  • Assists the Canadian training manager to produce process training materials
Education Education
Bachelor’s Degree in Communications
Bachelor’s Degree in Communications
Central Michigan University
Bachelor’s Degree in Communications
Skills Skills
  • Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation
  • Knowledgeable in proper operation of shear and ironworker machines
  • Ability to work effectively as a part of a team and build strong relationships with co-workers
  • Good level of knowledge in English Language (speech, writing and comprehension)
  • Highly responsible & reliable
  • Knowledgeable with various types of materials, metals and shapes used by the department
  • Possess basic mathematical skills; able to add, subtract, multiply and divide correctly
  • Knowledgeable to BAE HSY process control procedures
  • Safety conscious and show high levels of reliability, punctuality and dependability
  • Knowledgeable with Navy Standard Items
Create a Resume in Minutes

15 Apprentice resume templates

1

Apprentice Resume Examples & Samples

  • Candidates must be a recent college graduate
  • Only those individuals who are highly motivated and are self-starters need apply
  • While a degree in communications or journalism is preferred, it is not required. Strong writing skills are essential. Candidates will be required to take a broadcast writing test and will be asked to submit a one-page, single-spaced essay on why s(he) wants to go into broadcast journalism
  • Participation in college TV stations, radio, newspapers or literary magazines will be taken into account. Also, membership in any professional organizations such as RTNDA or other Journalist Associations will be considered
2

Apprentice Resume Examples & Samples

  • Each Apprenticeship will be of a six month duration which may be extended, based on individual circumstances. Candidates who are selected will be paid an hourly rate of pay, depending on market size. Stations will make every effort to find employment for those candidates who successfully complete the Program, either within the station where the Apprenticeship took place, or at another CBS Television Station. However, successful completion of the Program does not necessarily guarantee future employment. Apprentices will be considered “at will” employees and the Program can end at any time during the apprenticeship period, at the Station’s sole discretion
  • After you have read the Program description and requirements detailed here, click “Apply to Job” to submit your application. List any work experience, including summer or part-time jobs you may have had during high school, college or after graduation from college
  • Highlight any internship(s) or extracurricular activities (i.e. campus television or radio station, newspaper, etc.) that you have participated in, any professional organization membership(s) you hold, or any additional information you want us to consider, i.e. applicable course work, awards, special skills or accomplishments, etc
  • Attach a one-page, single-spaced essay on “Why I’ve Chosen Broadcast Journalism As A Career.” Applications submitted without this essay will not be considered
  • Candidates can be current college students graduating in 2014 with some relevant work experience, students currently pursuing a graduate degree or a recent college graduate
  • While a degree in communication or journalism is preferred, it is not required. Strong writing skills are essential. Candidates will be required to take a broadcast writing test
3

Apprentice Resume Examples & Samples

  • Support the Go to Market team for the Kids, Studio, and Outdoor & Casual categories
  • Compile best practices from the global markets
  • Maintain Reebok-specific systems
  • Exposure to working with various Reebok partners (Les Mills, Disney, and others)
  • Passion for our brand and industry
4

Color Apprentice Resume Examples & Samples

  • Excellent technical styling and/or color skills
  • Excellent customer service, communication, organizational and time management skills
  • Ability to work in a fast paced environment including evenings and weekends
  • This position requires moderate physical effort. Some unpacking and packing of materials is required when restocking the floor supplies. One must stand nearly 8 hours
  • Experience in beauty industry preferred
  • Must obtain a current cosmetology license issued by the state of NY
5

Cutting Apprentice Resume Examples & Samples

  • Thisposition requires moderate physical effort. Some unpacking and packing of materials is required when restocking thefloor supplies. One must stand nearly 8hours
  • Experiencein beauty industry preferred
  • Mustobtain a current cosmetology license issued by the state of NY
6

Utility Apprentice Resume Examples & Samples

  • Previous banquet experience preferred
  • Must have good verbal communication skills
  • Ability to work a flexible schedule that may include frequently working beyond the standard shift of approximately 4.5-7.5 hours per day is required
  • Physical exertion requiring standing for long periods, walking, bending, lifting, carrying and maneuvering heavy weights up to 50+ lbs
  • Standard shift is approximately 4.5-7.5 hours per day
7

Apprentice to Become Kaufmann Resume Examples & Samples

  • You have graduated from school with a good degree (commercial college, vocational diploma or university-entry diploma), or you would like to re-orientate yourself after joining university or you are a motivated career changer who already has some experiences in sales
  • Your German and English skills are excellent
  • You are an outgoing person who is able to express himself easily and free of errors verbally and in written
  • You have great organizing abilities and you can react flexible to new situations
  • You like using computers and you have good knowledge when it comes to the prevalent MS-Office applications, notably Excel
  • It’s considered an advantage to be interested in the computer and video games industry
8

Tool & Die Apprentice Resume Examples & Samples

  • Complete tasks and assignments within the trade under the direction of a Tool & Die Maker
  • Complete theoretical training as per government regulation and pass required exams
  • Complete training standards as per government guidelines
  • Be familiar and comply with Massiv Die-Form's Apprenticeship Program Policy & Procedures Guideline
  • Responsible for applicable QEMS policies, procedures and work instructions
  • Assist toolmakers in production run
  • Perform other reasonable duties as required and assigned
  • Grade 12 education required
  • Previous tooling/machine shop experience an asset
  • Good communication skills, attendance and performance required
9

Maintenance Apprentice Resume Examples & Samples

  • The Apprentice Maintenance Technician is to learn all the skills and competencies associated with production processes and site maintenance
  • Skills and competencies will include planned and unplanned maintenance activity on a wide range of plant and process equipment, working safely and efficiently to high quality standards
  • 5 GCSE Grades A - C inclusive of English, Maths and Science subjects
  • Chosen candidates must be keen and reliable and have an interest in this field of work
  • Good attitude and communication skills essential, plus willingness to learn
  • Experience in Engineering would be an advantage, for example NVQ Level 2 in Performing Engineering Operations (PEO), Performing Manufacturing Operations (PMO), BTEC National in Engineering, GCSE in engineering, GCSE in Engineering related subject
  • ICT Skills would be an advantage
10

MTM Apprentice Resume Examples & Samples

  • Relevant experience of 2-3 years in providing MTM related services, or fresh starters with high potential are also welcomed
  • Successfully completed an action plan with evident results to improve MTM business that involves collaboration with other functions as well as in consideration of competitor business
  • Key role in organizing and managing MTM related events successfully
  • Proven record in consistently providing and ensuring customer service that communicates luxury
  • Demonstrated intimate knowledge and understanding of products and Zegna collection
  • Team leadership experience includes coaching operational, technical as well as customer care skills as well as managing performance
  • Experience with driving performance and achieving results through cross function collaboration
11

PGA Apprentice Resume Examples & Samples

  • Answer phones and assist callers appropriately and in a friendly and efficient manner. Excellent telephone communication skills required
  • Greet all guests – golfers and non-golfers. Make eye contact and engage in conversation with guests, as appropriate. Assist starters with golf bags, if needed. Communicate local course rules and other important information, as necessary
  • Use the Golf POS system to reserve tee times for guests, check in guests upon their arrival, and accept payment for golf and merchandise. Apprentice is responsible for daily transactions and cash banks
  • Promote merchandise sales and assist guests with purchases in the golf shop. Apprentice must be knowledgeable about products available for sale in the golf shop
  • Communicate any delays or problems to the starters and player assistants, to ensure happy golfers
  • Maintain a clean and organized golf shop and storage room. Practice recycling. Empty trash throughout the day, as needed
  • Arrive and depart work shifts at the assigned times. A flexible work schedule is required, including weekends and holidays. Apprentice primarily works indoors, but may occasionally be required to perform some duties outdoors
  • Apprentice is required to dress in proper golf attire while working, pressed/ironed as necessary. Appropriate dress may vary, depending on weather conditions
  • Use of a resort radio may be required, as a form of communication with other golf employees. It is expected that all radio communication will be professional and polite
  • Employees must be able to lift heavy items, weighing up to 50 pounds, such as two fully equipped golf bags, large boxes or trash/recycling - required
  • Microsoft Office proficiency - required
  • Flexible schedule including holidays and weekends - required
  • Must be registered with the PGA as a PGM apprentice - required
12

Tool & Die Apprentice Resume Examples & Samples

  • Learn how to perform all levels of tool PM
  • Conduct tool disassembly/reassembly for repairs. Perform and/or assist with making mold or die changes (e.g., removing/replacing tool with crane, cleaning, keying in specifications), as per procedural checklist, according to daily change schedule
  • Perform non- machining related tool repairs
  • Assist with the development of work standards for tool PM
  • Provide Mold floor support for tool related issues
  • Assist with mold changeover & machine start up as needed using various hand tools (e.g., ratchets, socket wrenches, allen wrenches, nibblers) and crane
  • Work and train under the guidance of Technical Specialist/Mold or Stamping Specialist to learn proper mold/stamping change techniques
  • Use basic and special hand tools for measuring equipment
  • Collect and input mold maintenance data into electronic database
  • Use knowledge of injection molding process to trouble shoot part defects to determined mold related issues
  • Has knowledge of injection molding machine to safely work on mold while still in molding machine
  • Understands basic concept of mold water flow, venting, limit switches, hot runner, and valve gate
  • High school diploma or GED with vocational/trade certification preferred and 1-3 years of molding experience preferably with tool maintenance/repair/cleaning or related experience in a manufacturing environment
  • Must be quality oriented
  • Requires manual dexterity
  • Demonstrated mechanical ability
13

Tool & Die Apprentice Resume Examples & Samples

  • Follow and enforce all plant safety rules and policies
  • Maintain 3.0 GPA or higher to maintain program benefits and eligibility while attending the training curriculum which supports skills required for a Tool & Die Maker
  • Adhere to all educational guidelines required for participation in the apprentice program and represent CCMi in a positive fashion at all times
  • Perform all assigned tasks during the On the Job (OJT) phase of training at CCMi to the best of your ability
  • Adhere to all Health, Safety and Environmental Programs
  • Attend classroom instruction as required
  • On-The Job training under the close supervision and guidance of an experienced lass “A” Die Specialist with all work subject to review
  • Provide support in troubleshooting/repairs and system improvements
  • Contribute to continuous improvement and cost reduction activities
  • Maintain a clean orderly work area and support 5S initiatives
  • Complete all documentation as required including log book
  • Promote good housekeeping
  • This job description in no way states or implies that these are the only duties to be
  • A review of this description has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and requirements are essential job functions
  • Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees
  • Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently
14

Apprentice Resume Examples & Samples

  • Serve as lead coordinator of team administrative/organizational tasks as needed
  • Manage footwear & apparel product samples for photo shoots
  • Research, collect and analyze competitive campaigns and product, to present key findings at conclusion of co-op
  • Conduct consumer research to validate products and identify new trends
  • Assist product marketing team with footwear/apparel merchandising projects
  • Proactively identify opportunities to help improve group performance
  • Support the product teams in preparation of key meetings / milestones
  • Assist in the preparation of presentation materials for corporate and consumer meetings
  • Participate in cross-functional meetings
  • Eager to thrive in a fun, fast-paced, team-oriented work environment
  • Interest and knowledge of the consumer, fashion, sports and pop-culture
  • Willingness to roll-up sleeves and tackle any project
  • Capable of managing multiple projects simultaneously and completing on deadline
  • Must be flexible and able to handle multiple projects at one time
  • You must have received your undergraduate degree between December, 2014 and June, 2015 to be eligible for this program
  • Strong working knowledge of all Microsoft Office applications
  • A shared passion for the Reebok fitness mission
15

Reebok Apprentice Concept to Consumer Resume Examples & Samples

  • Support the Concept to Consumer team for the Running Category
  • Create weekly category newsletters for Reebok’s global markets
  • Aid in the creation of PowerPoint presentations
  • Schedule and coordinate various meetings
  • Support the team in preparation for global marketing meetings
  • Exposure to working with various Reebok partners (Spartan and others)
  • Complete ad-hoc projects as needed for the CtC, Brand Communications and Product teams
  • Outstanding team player, collaborator and consensus-builder, with a knack for earning respect and credibility quickly from management
  • Proficient in Microsoft Excel, PowerPoint, Word, and Outlook
  • Team oriented individual who can also work well independently
  • The Apprenticeship is a paid opportunity for one year from the agreed upon start date
16

Tool & Die Apprentice Resume Examples & Samples

  • Perform all duties in a safe manner in accordance with Section 28 of the Occupational Health & Safety Act and Regulations for Industrial Establishments—Duties of Workers
  • Safely operates equipment and tools and performs all duties in a safe manner in accordance with the safety policies of Karmax
  • Must abide by all Training Centre rules and safety regulations
  • Must maintain a minimum 70% academic score during the schooling portion of apprenticeship
  • Perform all duties in an environmentally responsible manner in accordance with the Karmax Environmental Policy Statement—3 P’s.Prevent Pollution, Preserve Natural Resources & Protect our Environment
  • Excellent mathematical, analytical and organizational skills
  • Able to perform various computer functions (Microsoft Office, Production Software)
  • Able to safely operate all Material Handling Equipment (Forklift, crane, buggy) in assigned area of responsibility
17

Pressroom Apprentice Resume Examples & Samples

  • High School diploma or equivalent related experience
  • Must be able to work any shift, weekends and holidays
  • Must be able to bend, climb stairs, ladders and lift up to 50 pounds as part of the physical requirements
  • Must possess relevant past experience in a large printing environment
  • Good organizational and analytical skills in order to operate, troubleshoot and repair offset press equipment
  • Strong interpersonal skills with mechanical abilities and the initiative to stay abreast of the technology enhancements made to the presses used at the Los Angeles Times
18

Resourcing Administrator Apprentice Resume Examples & Samples

  • Candidate attraction and talent pooling
  • Matching work experience requests to business areas
  • Inputting and managing referencing and on-boarding data
  • Managing the Careers inbox
  • Administering the ‘Refer a Friend’ programme
  • Raising purchase orders and liaising with agencies, Commercial Procurement and Accounts Payable
  • Booking travel and accommodation for candidates
  • Assisting with visa sponsorships administration
  • For more information and to register your interest please click on the following link
19

Apprentice Resume Examples & Samples

  • Entry level position. Experience in building / equipment repair and maintenance preferred
  • Has the aptitude to understand and be trained on mechanical, electrical , plumbing, and air conditioning component and system operation
  • Has the aptitude to understand and be trained on electrical and building codes
  • Has the aptitude to understand and be trained on occupational hazards and safety precautions of the building and mechanical trades
  • Has the aptitude to understand and be trained on tools, equipment, and materials used in the building trades
  • Has the aptitude to understand and be trained on inspecting systems and buildings to detect existing or potential problems
  • Has the aptitude to understand and be trained on the ability to read and understand blueprints and single line diagrams
  • Has the aptitude to understand and be trained on how to analyze situations and develop an effective course of action
  • Ability to perform arithmetic calculations as required by the job
  • Ability to maintain records and prepare reports
  • Understanding of Microsoft Office Suite including Word, Excel and Power Point
20

Tool & Die Apprentice Resume Examples & Samples

  • Fit and assemble tools and then test completed tooling for operation by proving out in a press, unit or fixture
  • Promote and comply with safety standards, safe operating procedures, good housekeeping practices and the observance of protective equipment requirements at all times
  • Any other reasonable duty required by Management
  • Completed 2nd year apprenticeship
  • 1 years related experience, preferably in an automotive manufacturing environment
  • Mathematical and mechanical aptitude
  • Basic knowledge of machine shop machines
21

Apprentice Resume Examples & Samples

  • Receipt cartons against our stores in the USA once confirmation of delivery has been given by our freight carriers
  • Manage and adjust DC to Store stock discrepancies in order to maintain our stock file integrity
  • Manage and adjust Store to DC stock discrepancies in order to maintain our stock file integrity
  • Adjust store stock files for carrier bag sales
  • Maintain our warehouse overships bin
  • Monitor & investigate warehouse transfers “in transit”
  • Maintain and adjust any warehouse transfer discrepancies
  • Monitor and manage stock audit emails
  • Investigate and adjust any stock write on/off requests
  • Assist and support the Senior Stock Accountant & Stock Supervisor with ad hoc duties
  • Apprenticeship basic salary of £13,065, rising on completion of qualification
  • Pension contributions
  • Life assurance
  • 50% staff discount
22

Reebok Apprentice Resume Examples & Samples

  • Unafraid to give ideas on what works, what doesn’t, and why
  • Solid organizational and communication skills
  • Knowledge of marketing, advertising, and promotional concepts a plus
  • Candidates should be energetic, self-motivated, with a strong desire to succeed and have fun
23

Apprentice Resume Examples & Samples

  • Be an energetic and motivated self-starter, with an enthusiastic ‘can do’ attitude
  • Have a keen interest in a career using digital technology and handling the challenges in managing high profile customer accounts
  • Be resilient and determined when faced with obstacles and setbacks
  • Be flexible and have a willingness to learn
  • Be able to work independently using your own initiative, whilst also possessing a strong teamwork ethic
  • Keeps abreast of developments in the IT industry, and can articulate these in terms of value to Xerox and our customers
  • Knowledge and experience of Windows, Unix/Linux, and Apple Mac client Operating Systems, environments and administration
  • Knowledge of networking environments, and an understanding of network authentication and security methods
  • Knowledge of PDL’s such as Postscript and PCL, and experience of working with PDF documents and workflows
24

Apprentice Resume Examples & Samples

  • Coordinating with all internal customers and external suppliers in conjunction with the unit Sourcing Department
  • Interfacing with the operations and engineering teams of SSP unit and GE Grid Solutions Products
  • Preparation of Tender Documents, procedures and reports in conjunction with the Tendering team
  • Review customer specifications and bid requirements for completeness and obtain clarifications from sales, engineering, legal, taxes, logistic and other departments, as needed
  • Give Support for the opportunity tracking in Speak updating tender information
  • Improve the Tendering processes and procedures
  • Electrical Engineering degree
  • Fluent in English (essential)
  • Design software and Autodesk tools (AutoCAD, Inventor)
  • Person with high energy and proactive
  • Able to learn quickly
  • Design software and Autodesk tools (AutoCAD, Inventor,)
25

Production Apprentice Resume Examples & Samples

  • The process environment can be a very noisy and dusty environment i.e. extensive use of PPE is mandatory across the site (safety glasses, hard hat, ear protection etc.)
  • Exposure to chemical systems and bulk chemical handling
  • Shift pattern consistent with a 24hr – 365 day operation
  • Plant personnel are exposed to changing weather conditions e.g. working outside the operational buildings
  • High expectation of safety standards should be the driver for anyone working in this environment
  • Willingness to challenge the status quo and innovate for continuous improvement
  • Minimum of 2 ‘A’ levels grades, or equivalent. Preferably in Maths, Physics or Chemistry
  • The ability to make decisions within a fast moving process environment
  • Working in a self-managed team environment
  • To respond positively and effectively to changing customer needs
  • To work flexibility across areas of the plant
  • Good planning and organisational skills
  • Ability to work under own initiative
  • Takes ownership of decisions
26

Blending Apprentice Resume Examples & Samples

  • Plan and monitor the distillate rating activities including the sensory audit appraisals and communication thereof
  • Plan and monitor the establishment of sensory standards for distillates, ingredients, part blends and finished products
  • Supports all blending activities
  • Assist and support the timely issuance of product formulations within costing parameters
  • Assists and supports Third parties distilleries trials and qualifications
  • Sensory of assessment of samples
27

Pre-apprentice Co-op Resume Examples & Samples

  • Learn to perform hands-on wiring, assembly, programming and documentation of projects and maintenance repairs
  • Assists with manufacturing and systems process improvement projects including development, programming, implementation, commissioning and final documentation. Work with a variety of other skilled technicians and contractors on projects are so at to have them completed on time, on budget with the highest degree of quality and workmanship
  • Learns to provide diagnosis and repair minimizing downtime, increasing utilization and efficiency. Learn to diagnose repair or replace damaged or broken wires/cables, printed circuit boards, modules, or sensors associated with malfunctioning electrical apparatus such as transformers, motors and motor controllers, lighting circuits and fixtures, temperature controllers, AC and DC drive motor controllers
  • Learn to diagnose repair or replace damaged pneumatic, hydraulic and mechanical components associated with malfunctioning processes such as pumps, motors, valves, cylinders, bearings, chains and sprockets
  • Learn to perform electrical, mechanical, PLC, and routine maintenance duties as required
  • Must be enrolled in high school/career academy mechanical/mechatronics/electrical/automotive program
  • Must be willing to obtain certification as Mechatronics Technician under the pre-apprenticeship program
  • High School attendance a requirement
  • Must be able to work safely
  • Must be able to learn to communicate with team members, vendors, suppliers. Must be able to work individually or in team setting as work dictates
  • Must be able to learn to read and write schematics and drawings to specify new or replacement components for equipment
  • Must be able to learn to draw and use blueprints to wire, install, build and troubleshoot electronic and electrical equipment and controls
  • Ability to learn to test and troubleshoot electrical circuitry with appropriate test equipment. Must be able to analyze problems and correct deficiencies
  • Ability to learn to test and repair plumbing systems, and replace parts as necessary. Test for proper operation and integrity
  • Ability to learn to clean and lubricate equipment, check pressures and spec and correct deficiencies
  • Must be able to learn to clean, inspect, and disassemble machinery and equipment. Must be able to evaluate work and broken components to determine status
  • Must be able to learn to assemble and reassemble new gaskets, parts, and test reassembled item to determine conformance to standards
  • Must be able to learn to test and repaired compressed air and vacuum systems and devices
  • Must be able to learn to replace or repair defective components and reassemble system. Test and adjust for correct application
  • Must be able to learn to use power tools for structural construction
  • Must be able to learn to weld using Oxy-Acetylene, Electric Arc, Soldering, Brazing, Silver Soldering, and Gas shielded welding processes
  • Must occasionally lift and/or move up to 75 pounds, and be able to climb and work up to 100 feet
28

Maintenance Apprentice Level Resume Examples & Samples

  • Accepts full responsibility for personal safety and following all safety procedures
  • Follows all rules and regulations with regards to food safety and GMPs (Good Manufacturing Practices)
  • Understands and demonstrates the Hershey values
  • Demonstrates good housekeeping practices
  • Participates fully in the Apprenticeship Program to learn and understand equipment/process function/operation; develops technical skills through both in-house and external training
  • Assists other team members with equipment repairs as needed
  • Learns and performs repetitive PM (Preventative Maintenance) tasks on equipment; cleans & inspects a wide range of parts and equipment; repairs and/or reports further work needed
  • Understands and executes line setups and changeovers to ready production lines for operation
  • Repairs/rebuilds equipment and components based on technical skill level
  • Performs routine cleaning and maintenance of facility, inside and outside, and equipment
  • Communicates with both internal and external customers
  • Reports work output through both verbal, written, and computer-based programs (e.g., email, SAP, etc.)
  • Develops appropriate skill level on mobile equipment to support job duties (e.g., loads and unloads parts and packages)
  • Performs other duties as requested, directed or assigned based on skill level
  • Possesses good math skills
  • Possesses basic computer skills
  • Understands and uses hand tools, power tools, and other types of basic shop equipment
  • Follows directions and shows attention to details
  • Shows a desire to learn and a willingness to participate/contribute in a team environments
  • Light to moderate physical effort required
  • Must be able to lift up to 50 pounds
  • Majority of work performed in a plant environment
  • Some work requires being outside on plant grounds, this may include working in inclement weather
  • Must possess a minimum of 4 years of previous technical experience or equivalent accredited technical classes in Mechanical, Electrical, or Controls
  • Must participate and successfully complete a Technical curriculum selected by the Hershey Company consisting of the following subject matter
  • Manufacturing Fundamentals/Processes
  • Integrated Manufacturing Systems
  • Industrial Electrical Systems
  • Industrial Robotics
  • Motion Control
  • Process Control & Instrumentation
  • Motors and Controls (AC and DC)
  • Analog and Digital Devices
  • Schematics and Electrical Print Reading
  • Computers and PLC’s
  • Power Supplies
  • Basic AC / DC Theory
  • Power Distribution
  • Test Instruments
  • Hydraulic and Pneumatic systems operational theory, troubleshooting and repair. Including ability to read blueprints and schematics and systematically diagnose and repair problems
  • Lubrication
  • Mechanical Drive systems including Chains, Belt, Shaft, and Gear Drives
  • Drive components including Clutches and Brakes
  • Conveyors
  • Rigging including Wire Ropes, Chains, Hoists, Slings and Lifting, Equipment Movement
  • Pump Systems
  • HVAC systems including controls for Air, Refrigerant, Pressure and Temperature
  • Steam including Boilers, Temperature and Pressure Control, Condensate Control and System Operation and Performance
29

Employee Changes Apprentice Resume Examples & Samples

  • Reports to the Employee Changes Team Leader within the Support Services team in the St Albans office
  • The Apprentice will undertake allocated tasks in order to ensure that data is processed internally and passed to third party administrators in a timely fashion
  • The Apprentice will liaise with Reward, finance and payroll in order to undertake the role
  • Ensuring excellent customer service is consistently delivered
  • Completion of Employment, Mortgage, Whom it may concern references
  • Probation reminders to Managers – Managing the responses / sending confirmation letters
  • Updating Address, bank details and personal information
  • Managing contract extensions
  • Checking proof of eligibility to work in the UK documents and / logging this on HR systems and coordinating with our Global Mobility team
  • Contract Extensions – managing the process –reminders, System Updates, Letters
  • General Admin duties as required
  • Updating trackers, spread-sheets and systems
  • Excel – knowledge of creating and updating spreadsheets is essential
  • Word – experience in creating letters is essential
  • This role requires excellent numeracy skills
  • Minimum of GCSE or equivalent in Maths and English at grace C or above
  • Proven office experience, ideally gained within HR or similar
  • A proven track record of delivering excellent customer service
  • An intuitive, analytical and pro-active approach
  • Experience of working to and consistently meeting challenging deadlines
  • Experience of working with computerised information systems
  • Competent in MS Office suite, including good excel skills
  • Proven organisational skills , self-motivated and professional
  • Team player, with a proactive self-starter approach
30

Insulator, Apprentice rd Y Resume Examples & Samples

  • Display Coaching Skills; describe the industry network; recognize the importance of fireproofing and fire stopping systems; recognize the various applications of various spray applications; understand commercial process systems; understand industrial process systems
  • Ability to Install a concentric reducer; install an eccentric reducer; install a square to round transition; install square to square transition; install finish on head segments
  • Perform a pan out and cut out for obstructions; install common types of elbows; install a lateral; Install box coverings
31

Electricial Apprentice Resume Examples & Samples

  • Assist Journeyman with maintenance, troubleshooting, repair, installation and construction of industrial electrical equipment and systems found in an industrial or commercial environment through the proper use of standard wire, conduit, fittings and hardware commonly found in industrial plants
  • Assist Journeyman while learning to bend, cut, thread and install current conduit
  • Help Journeyman install and terminate wiring
  • Test and troubleshoot simple electric circuits and electrical devices and machinery
  • Responsible for use and care for the tools and equipment commonly employed in industrial construction such as hydraulic/electric benders, knockout punch sets, cable puller, meggers, hi-pot equipment, volt meters, multi-testers and ammeters and other electrical parts
  • Assist other crafts with general labor work
  • Participate in daily and weekly Tool Box meetings
  • Must possess current knowledge of electrical apprentice and organizational practices
  • Attend electrical training and workshops required by organization
  • Must be able to follow all company, client, safety and regulatory requirements, including, but not limited to, policies, procedures, standards and guidelines as they relate to this position and the work duties being performed
  • Written and oral communications applicable to standards set by organization
  • Current and valid Alaska State Fitness Card required
  • Candidate required to be enrolled in ABC Apprenticeship program in order to be considered for the apprentice position
  • Employee to provide his/her own tools required
32

Sprinkler Apprentice Resume Examples & Samples

  • At lease 18 years of age
  • Have a valid driver’s license and have a clean driving record
  • Must be able to pass a background check
  • Must be physically fit to perform the work of the trade
33

Apprentice Resume Examples & Samples

  • Carry/move equipments and tools weighing up to 50 pounds
  • Perform work from unusual and sometimes difficult positions
  • Maintain a clear and safe work area
  • Must be able to work alternate shifts or weekends to meet customer's requirements
  • Have a valid driver's license and have a clean driving record
  • Must be able to pass a drug test
34

Fabrication Apprentice Resume Examples & Samples

  • Interpret basic levels of blueprints/drawings and production orders
  • Verify material requirements and quantities to Bill of Materials specifications
  • Report any shortages, B.O.M. discrepancies and substitutions immediately to direct lead/supervisor
  • Accurately measure lengths and squareness to tolerances
  • Ensure parts are made within the quality specifications of the print/drawing
  • Report any machine malfunctions, defective parts or safety hazards
  • Know and follow established job specific and site wide health and safety procedures and rules
  • Bring health and safety issues, unsafe acts and safety suggestions to management’s attention
  • Adhere to 5S standards and requirements for proper area maintenance
  • High School education or GED from an accredited institution required
  • Must be able to work in the US without Company sponsorship
  • Only candidates in the geographic area of Denver will be considered. Relocation benefits are not provided for this position
  • Attention to detail and adaptability
  • Ability to work in a fast-paced environment while maintaining safety and quality priorities
  • Ability to perform all job functions in adherence to Eaton’s philosophy and values, policies as well as the Environmental, Health and Safety standards
  • Ability to engage in repetitive motion and tolerate exposure to varying temperatures
  • Ability to regularly lift 35 pounds without assistance and occasionally lift more than 35 pounds with assistance
  • Ability to wear required personal protective equipment as required by company policy and procedure
  • Proficient with using basic hand tools (i.e. hand drills, tape measurers, etc.)
  • Machine operation experience, e.g. Miter Saws, Table Saw, Drill Press, Hydraulic/Pneumatic Presses, Dual-Action sanders
35

Fabrication Apprentice Resume Examples & Samples

  • Interpret blueprints/drawings and production orders
  • Identify part size, hole sizes and location dimensions
  • Properly maintain equipment in accordance with TPM requirements
  • Aid in preventative maintenance activities
  • High School education or equivalent (i.e., diploma or GED) from an accredited institution required
  • Only candidates a 50 mile radius of work location will be considered. Relocation benefits are not provided for this position
36

Apprentice Resume Examples & Samples

  • Ensure prompt and courteous service is extended to both internal and external customers
  • Escort general inquiries on site inspections
  • Prioritize all telephone calls and in-person visitors, scheduling appointments as required
  • Assist all sales promotional literature is current and updated
  • Provide all administration duties for the Sales office
  • Assist with the maintenance of accounts, contact, activity and business details within appropriate software applications
  • Computer literate in Microsoft Window applications andor relevant computer applications required
  • Ability to communicate in English and Bahasa Indonesia required
37

Apprentice Resume Examples & Samples

  • Work in a very dynamic and demanding work environment
  • Brief senior staff officers to effect decisions
  • Work independently with minimal or no oversight
  • Work cooperatively as a team member and provide guidance to NGA analysts to build effective customer relationships
38

Textile Apprentice Graduate Scheme Resume Examples & Samples

  • Artwork placements throughout Main collection and Bridal
  • Colourway CADs
  • Manage the swatch archive
  • To create research and sourcing packs for swatch development
  • To support Desgin VP, Textile Designer and Fabric Buyer in various admin roles
39

Blending Quality Apprentice Rum / Whiskey Resume Examples & Samples

  • Coordinate the Blending activities and blend profiles
  • Sensory of assessment of NA whiskies
  • Timely issuance of product formulations within costing parameters
  • Optimize use of maturate inventory in all locations
  • Supports Quality Assurance programs
  • Ensure that products meet all regulatory requirements and that they comply with company policies and processes
  • Supports blending activities for new innovation launches
  • Support PR activities related to NA whiskies
  • Support craft still activities
  • This is an entry level position seeking a Bachelor Degree in Food Science, Food Engineering, Fermentation Science, Sensory Science or other related field
  • Experience in the alcoholic beverage industry of 2-5 years is preferred
40

Apprentice Resume Examples & Samples

  • Plan and execute safe drydocking/undocking evolutions and vessel arrivals and departures
  • Maintain positive stability of all vessels under company control
  • Plan and schedule manpower, material, and equipment
  • The Apprentice will take a lead position in the dry dock maintenance program
  • The Apprentice will become fully qualified in the operation of all equipment associated with the three docking platforms on the yard, as well as, become familiar with all operating parameters
  • Ensure compliance with appropriate company, FDEP, EPA, OSHA, and USCG regulations
  • Ensure compliance with all NAVSEA MIL-STD reporting requirements and applicable NAVSEA Standard Item requirements
  • Support and promote the company’s Safety and Quality programs
  • Bachelor’s degree in Naval Architecture or Marine Engineering from a four-year College or University; or two to four years related experience and/or training; or equivalent combination of education and experience desired
  • Successfully completed a drydocking training course by DM Consulting, Heger Dry Dock, or similar is a plus
  • Knowledge of MIL-STD 1625 series; NAVSHIPS Technical Manual, Chapter 997; and Facility Certification Reports is desired
  • Knowledge of docking procedures, ship handling, and ship design
  • Proficient in computer applications such as MS Word, Excel, Access, and AutoCAD
41

Apprentice Resume Examples & Samples

  • To work with the team in maintaining efficient, reliable and repeatable plating processes in order to facilitate the production of quality parts and adhering to customer required dates
  • To assist with the development of new plating methods with clearly defined control specifications
  • Contribute to the constant review of existing methods for potential improvements to process stability, product quality and cost
  • Contribute to the analysis of control plating solutions and associated processes as per departmental schedules
  • Contribute to monitoring and controlling the effluent treatment plant whilst maintaining clarifier, probes, filter cake manufacture and reagent levels
  • Contribute to maintaining, and when required to develop, a system of analytical process monitors, in order to detect and prevent process failures
  • Contribute to the preparation, audit and maintain health and safety, COSHH procedures to current, company and external approvals and legislation
  • With direction carry out investigations and submit reports on any matters relating to the surface treatment of company products
  • To maintain laboratory records and reporting data to meet company and legislative requirements
  • To maintain stock control of chemicals and equipment to ensure continuous and smooth function of the department
  • To participate in training for departmental staff as and when appropriate
  • Ensure company procedures and policies are maintained
  • To keep up-to date with new and developing surface finishing techniques within the industry
  • Liaise with the maintenance department regarding any issues that affect or potentially affect the continuous and smooth function of the department
  • When required to carry out DBS activities
  • To carry out any other reasonable tasks as may be requested from time to time
42

Apprentice Resume Examples & Samples

  • Develop degradation models on such component based on logged vehicle data and service history databases,
  • Identify model gaps and limits,
  • Validate the prediction models,
  • Parametric and non-parametric statistics,
  • Data mining: clustering, multivariate data analysis (descriptive / predictive), etc. …
43

Cefs Apprentice Resume Examples & Samples

  • The participant will be involved in all farming activities to learn all aspects about farm equipment and management practices
  • The participant will be involved in all the research activities, including planning, sampling, measuring, data management, and evaluation which will provide a good understanding about sustainable agriculture research procedures
  • The participant will share ideas and take part on discussions to decide actions to improve both production and research procedures and strategies
  • The knowledge and experiences gained can be applied toward diverse farm management and sustainable agriculture research purposes
  • Able to do tasks independently
  • Work as part of a team
  • Lift up to 40 pounds
  • Must be able to follow directions
  • Must be able to do tasks independently
  • Must be able to lift at least 40 pounds
  • A background in agriculture is not required, but applicants must show a keen interest in learning more about sustainable agriculture, vegetable and/or livestock production, and agricultural research
  • Applicants must be flexible and open to working with producers, Extension Agents, Faculty, Field Technicians and other organizations
44

Sprinkler Apprentice Resume Examples & Samples

  • Installation of water based fire sprinkler systems, layout and fabrication of piping
  • Follow verbal and written instructions, read and understand construction blueprints, diagrams, and specifications used in installation activities a plus
  • Carry/move equipment and tools weighing up to 40 pounds
  • Perform work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equpipment up to 40 feet or more
  • Maintain a clean and safe work area. Pick up and properly dispose of all trash associated with SimplexGrinnell work. Wear appropriate safety equipment as required including hats and shoes
  • Properly secure all SimplexGrinnell tools and equipment at the end of each work period so as to prevent damage or loss
  • Complete and submit time reports and other doucments as required
  • May be required to work alternate shifts or weekends to meet customer installation requirements
45

Apprentice Resume Examples & Samples

  • Follow and abide by all government, Legal, Magna and Formet rules and regulations
  • The Apprentice works under the close supervision and guidance of a qualified journeyman with all work subject to review
  • Inspect, maintain, repair and modify designated machinery, equipment, process and facilities as assigned. Conduct all activities in a professional manner and positive attitude with emphasis on personal responsibility
  • Evaluate and improve our processes for uptime and repeatability
  • Evaluate downtime situations for root cause and suggest/implement improvements in conjunction with Maintenance Technicians
  • Interact with the team members running the line to look for improvements or ideas to improve your/their job/task and improve line Safety, Quality and Productivity
  • Preventative maintenance on equipment – identify weaknesses in design and implement improvements. Take pride in workmanship
  • Monitor and participate in ensuring all Key Performance Indicators (Safety, Quality and Productivity) are being achieved and if not assist in developing action plans to ensure success
  • Ensure all key information is captured and exchanged at shift change to support the other shifts
  • Co-ordinate activities of helpers and assigned contractors
  • Assist in developing and/or updating preventative maintenance procedures
  • Maintain a clean orderly work area and job site
  • Degree diploma in Mechatronics or Electromechanical education
  • Attend and complete with a minimum passing grade of 70%, the Government required education
  • Must pass all training designated for the operation of equipment such as forklift, manlift etc
46

Production Apprentice Resume Examples & Samples

  • Must be
  • Eligible for employment in the U.S
  • Must meet the following requirements
  • Undergo a drug screen for illicit use of drugs as a condition of employment
  • Submit to periodic drug screens as a condition of employment
  • Work any shift and/or rotating shifts
  • Work overtime on a regular basis and with last minute notification
  • Work holidays and/or weekends on a regular basis
  • Wear required safety equipment
  • Operate/work in industrial conditions (may be warm/hot, dusty/dirty, around hazardous chemicals, noise, heavy machinery or elevated working surfaces with proper safety training and safety protection)
47

Apprentice Resume Examples & Samples

  • Signature of Commercial Offers
  • Signature of Contracts,
  • Signature of Purchase Orders,
  • Signature of MOU (Memorandum of Understanding), NDA (Non Disclosure Agreement), partnership agreements,
  • Administrative or legal documents required for commercial prequalification files, for registration of ALU-I in customers databases, for offer submission, for contract signatures, etc
  • 1/Treating the request
48

Apprentice Intake Resume Examples & Samples

  • Have a drivers licence
  • Your own transport is required for Canberra, Newcastle and Townsville
  • Your own transport is preferred for Sydney and Brisbane
49

Mechatronics Apprentice Resume Examples & Samples

  • Meet or exceed all defined skills development criteria referenced in the Mechatronics Apprenticeship Program document
  • Meet or exceed all defined Hershey Values evaluations as defined in the Mechatronics Apprenticeship Program document
  • Complete the apprenticeship program in the 4 year period as outlined in the Mechatronics Apprenticeship Program document
  • Earn a 3.0 GPA, or better, in all required college and vocational courses
  • Undertake and complete college and vocational coursework outside of normal work hours, and during non-paid time
  • Work a normally scheduled 8-1/2 hour shift, 5 days per week
  • As needed work 2nd or 3rd shifts; educational commitments and out-of-work commitments and priorities will be reviewed before altering the work shift of an Apprentice; however, significant exposure to 2nd and 3rd shift during the 4-year program will be properly planned and scheduled
  • Work overtime including weekends and holidays as scheduled, or as needed
  • Accept constructive and critical feedback from technical subject matter experts in a manner that further develops one’s skills and leadership traits
  • Must possess a High School Diploma / GED
  • Must be flexible to work any shift (1st, 2nd and 3rd shift)
  • Must be available to work weekends, holidays and overtime at the conclusion of the apprenticeship program
  • Must be able to lift up to 25-50 lbs
  • Must be authorized to work in the United States
  • Must be able to read, write and comprehend English
  • Must possess ability to read and interpret blueprints and drawings
  • Must possess computer skills with knowledge of Microsoft Word and Excel
  • Must possess an understanding of mechanics and mechanisims
  • Must possess an understanding of electricity
  • Must possess math skills with a demonstrated knowledge of algebra and geometry
  • Successful completion of a 2-year technical vocational curriculum (certificate or diploma received) with a concentrated focus in one of the following fields: industrial maintenance mechanics, industrial electricity and/or electronics, computer and logic programming, precision machining, welding, or other technical trade aligned with the Mechatronics Apprenticeship Program
  • In lieu of successfully completing a 2-year technical vocational program in one of the above noted fields, successful completion of a 2-year Associates Degree in an engineering field of study, e.g., mechanical engineering or electrical engineering
  • Continued technical education beyond the 2-year technical vocational program or engineering Associates Degree program
  • Knowledge of AutoCAD programs
  • An understanding of industrial safety practices and procedures
50

Apprentice Resume Examples & Samples

  • Cover letter – address why you would like to be considered for an apprenticeship opportunity with Volvo Group Australia
  • Resume – include the details of any previous paid/unpaid work experience, training, hobbies, interests, certificates and awards
  • Please also confirm which site/s you would be interested in working at e.g. Blacktown and/or Chullora
51

Apprentice Resume Examples & Samples

  • Apprentices assist the foreman/journeymen with the installation of fire sprinkler systems, including start up through final testing
  • Must be able to follow verbal and written instructions in English, carry/move equipment and tools weighing up to 50 pounds and perform work from unusual and sometimes difficult positions, including attics and on scaffolding
  • Candidate must be able to work from ladders and lifts up to 40 feet or more and adhere to all company safety policies and procedures
  • Must be able to work alternate shifts or weekends to meet customer’s requirements
52

Advanced Step Apprentice Locator Resume Examples & Samples

  • Possess valid driver’s license
  • Experience in reading Gas and Electric maps or prints
  • Complete understanding of Gas and Electric distribution practices
  • Available for 24hr call out duties
  • Experience in damage prevention practices
  • Subject to DOT drug and alcohol testing requirements
  • Subject to work in inclement weather conditions
  • Employee will be expected to drive a company vehicle
  • 1 or more years of experience locating Gas and Electric cable
  • 6 months of recent locator experience within the last 12 months
53

RVC / NIU Apprentice Resume Examples & Samples

  • Follow appropriate work instructions in order to successfully receive, clean, machine, assemble, join, treat, handle and test parts
  • Utilize computer programs, including web based systems, to enter part data, log time, and look up information in order to complete assigned work tasks
  • Apply inspection techniques, use inspection tools efficiently, verify the calibration/expiration dates of test equipment and write non-conformance reports (NCR's) when necessary
  • Machining: Set up, operate, and maintain machines in an industrial setting
  • Special Processes:Heat treat, braze, and plate
  • Assembly: Assemble, install, align, adjust, lockwire, and fit sub-assemblies and parts or auxiliary equipment using appropriate tools and equipment in an industrial setting
  • Test: Calibrate and test control fuel samples, maintain and validate test samples
  • Inspection: Utilize basic inspection equipment to verify hardware conformance to specification and drawing requirements
  • Support: Perform a variety of tasks including, but not limited to, stocking, shipping, washing, inspecting, buffing and polishing
  • Clean and organize immediate work area
  • Participate in continuous improvement activities
  • Assist in scheduling work and product flow
  • Work cooperatively with a positive attitude in a team environment across a variety of departments and shifts
  • Dependability - Must have no more than 2 instances within the first 90 days of employment
  • Quality - Must meet quality expectations
  • Overtime - Must be able to regularly work overtime with 24 hour notice
  • The ability to accurately provide the information requested on specific forms, reports, and logs. This includes the ability to see details, generate or transcribe appropriate words, numbers, letters, marks, labels, signs and symbols
  • The ability to perform simple arithmetic computations including addition, subtraction, multiplication, and division correctly, using whole numbers, fractions, decimals, and percentages
  • The ability to perform multiple tasks simultaneously and to follow work orders efficiently
  • Basic mechanical aptitude
  • The ability to navigate in an on-line environment to locate documents
54

Apprentice Resume Examples & Samples

  • Assist the Human Resources Department in the day-to-day operation of the department as required
  • Assists with recruitment, including posting of positions, screening CV’s, and contacting applicants
  • Foster and promote positive Colleague relations through an environment that encourages open communication, trust and mutual respect
  • Ensure the Human Resources department complies with all corporate, regional and hotel policies and procedures; and governmental regulations pertaining to all colleagues
  • Handle the calendar and administration assistance for the Human Resources Leaders
  • Schedule and arrange appointments as required
  • Handle locker requests, name badges, ID’s, Colleague letters, purchase requisitions, expense reports as necessary
  • Compose correspondence for the HR Department, such as letters, contracts, etc
  • Support internal HR projects, tracking necessary action and updating reports as progress is made
  • Filing Employee records
  • Handle all office administration duties such as faxes, mail, phones, photocopying, office supplies
  • Assist with and support colleague events as appropriate, such as leadership meetings, colleague receptions, and annual events
  • Assist with scheduling of interviews
  • Due to local legislation, must be Indonesian
  • Previous Human Resources experience an asset
  • Highly responsible and able to handle confidential information with the utmost discretion
  • Highly organized and able to prioritize and meet deadlines in a fast-paced environment
  • Computer literacy a must, with a strong knowledge of Word, Excel, Word, Outlook and PowerPoint
55

Apprentice Resume Examples & Samples

  • Complete all core daily, weekly and monthly tasks supporting Cash Flow Monitoring, Safekeeping of Other Assets and Oversight activities
  • Complete all core tasks within required regulatory timeframes and to the quality expected
  • Day to day management of daily service delivery and adherence to service levels
  • Monitor the timeliness of service delivery and look for process improvements
  • Build relationships and work with Support Services Teams globally when required
  • Communicate frequently with direct Line Manager
56

Apprentice Resume Examples & Samples

  • Must be a U.S. citizen or naturalized citizen
  • Must be able to board all ships and enter all spaces regardless of size to complete inspections and ensure compliance of safety rules
  • Must be able to walk up and down stairs
  • Must be able to interact with a variety of people in a variety of settings
  • Handle physically demanding environments (rain, wind, heat, heights, confined spaces, etc.)
  • Must have the ability to climb vertical ladders up to 100 feet and enter confined/enclosed spaces
  • Must be able to understand verbal and written English instructions, perform them safely, correctly and in a timely manner
  • Capable of continuously lifting up to 50 lbs. and occasionally up to 75 lbs
  • Having a good understanding in proper use of various hand tools
  • Capable of obtaining government security clearance to perform work on military contracts, if necessary
  • Must be able to wear required personal protective equipment
57

Sena Apprentice Csm Resume Examples & Samples

  • Superior level in the use of Microsoft tools
  • Knowledge on Rockwell Automation & other control systems
  • Self motivated to complete administrative task and to develop templates and reports from the CSM contracts data
  • Well organized to do a follow up of several tasks of the CSM operation
58

Apprentice Resume Examples & Samples

  • Ability to weld Flux Core, and Stick (MIG is a plus), Carbon Steel and Stainless Steel
  • Understands heat requirements; amperage's, voltages, pre-heats, inter-pass temperatures and post head requirements
  • Ability to layout, cut and prepare plate for installation
  • Knowledgeable with Navy Standard Items
  • Knowledgeable in proper operation of shear and ironworker machines
  • Familiar with filler wire controls, filler wire selection and acceptable weld preparation techniques
  • Have working knowledge of weld procedural requirements, special requirements and safety requirements for the accomplishment of tasks
  • Knowledgeable to BAE HSY process control procedures
59

Apprentice Resume Examples & Samples

  • Possess basic mathematical skills; able to add, subtract, multiply and divide correctly
  • Skilled in performing simple measurements
  • Fully capable to calculate square footage and circumferences
  • Able to cooperate and work well as a team player/member
  • Knowledgeable with various types of materials, metals and shapes used by the department
  • Familiar with maintenance requirements of departments' equipment
  • Knowledgeable with various types of welding rods, application and storage requirements
  • Skilled in proper operation of AC & DC welding machines (Bank & Portable)
  • Must be a US Citizen or Naturalized citizen
  • Must have a High Diploma or equivalent
  • Must have at least 1 year of experience working in the capacity of Shipfitter and/or Welder
  • Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights
  • Must be able to lift and carry up to 50 pounds
  • Must be able to work outdoors under all weather conditions
  • Must be able to work all shifts, weekends and overtime, as required
60

Apprentice Resume Examples & Samples

  • Daily recording of entertainment and promotion accounts
  • Daily support of accounts payable and accounts receivable
  • Assist with the reconciliation and payment of third party cheques
  • Maintain stationary level and reorder as required
  • Ensure vendor files are up to date
  • Assist in the month end reporting
  • Provide office administration duties as required
  • Previous office administration or accounting experience preferred
  • Computer literate in Microsoft Window applications or relevant computer applications required
  • University/College degree in a related discipline an asset
61

Apprentice Resume Examples & Samples

  • Ensure follow-up of action is completed with-in the quoted time
  • Work with related departments to ensure efficiency in meeting guests needs
  • Able to contribute to a team environment by assisting co-workers in all departments related to the call center. And ensuring the attention to detail is recorded with each guest’s issue
  • Assist to the trade technician complies with established safety practices while expertly performing preventive maintenance, repair or retrofit of all type of Electrical work
  • Assist to the trade technician operates, preventively maintains and repairs all pertinent hotel systems, devices, controls, instruments, equipments, etc
  • Assist to the trade technician complies with all established procedures, e.g. Work Orders, Preventive maintenance, Out-of-Order Rooms, Emergencies, etc. & Complies with energy management practices
  • Under supervision of trade technician through logs and utilities data, determines optimal operating efficiencies and takes necessary corrective measures when variance from standards are excessive
  • Attends departmental meetings or any other meetings as may be assigned Ex. Chief Engineer
  • Assist to the trade technician carry out preventive maintenance, repair or retrofit of all type of Electrical work, records and analyses operating logs and utilities. Take immediate measures as necessary. Handles emergencies in repair works
  • Under supervision of trade technician carry out improvement, maintenance and repair work on all building services and equipment according to the standards and requirements
  • Under supervision of technician perform daily start up, shutdown and inspection of building services and equipment according to the standards and requirements
  • Assist to the trade technician maintain tools and equipment, and perform engineering housekeeping work, Update daily maintenance log, complete the work order forms & work place clean tidy and well organized
  • To attend to complaints from hotel guests and other departments & Handles emergencies in repair works
  • Comply with hotel and department policies and procedures at all times & Carry out any other duties as when assigned by the Management of the Hotel and department
  • Under supervision of trade technician work very closely with Room Maintenance team, meet the entire job requirement & Follow all job instructions given by Electrician, Shift Engineer or other Senior Staffs
  • Follow weekly / monthly duty schedule / split duty schedule and to carry out any other engineering work/ assignment and to perform duty as Task force and may be transferred to other group Hotels as Business demand
  • To be available in Hotel / Colleagues Housing immediately for any emergencies such as Fire and others and act in a professional manner to protect our Guests, Staffs and preserve the Hotel Property and its system. Follow Hotel Crises plan
  • Follow up Company and department safety and security policies and procedures to ensure a clean, safe, and secure environment. Attend all departmental trainings and other training program
  • Report work related maintenance problem, safety related issue, accidents, or other injuries immediately upon occurrence to Shift Engineer or other senior staffs
  • Use proper equipment, Wear appropriate personal protective equipment and use correct lifting procedures as necessary to avoid injury. Using material safety data sheets. Identify and correct unsafe work procedures or conditions and/or report them to Shift Engineer. Follow policies and procedures for the safe operation and storage of tools, equipment, and machines. Complete appropriate Fire and safety trainings and certifications to perform work tasks
  • Ensure uniform, nametags and personal appearances are clean, hygienic, professional and compliance with Hotel policies and procedures
  • Minimum three (3) years experience with the similar position in a five star Hotels or similar organization
  • Required trade license or certification or Diploma etc
62

Aftersales Apprentice Resume Examples & Samples

  • To be able to effectively communicate at all levels, both written and verbally
  • To be able to learn and use GDS and associated software and systems (parts and customer information systems)
  • To be able to competently use desktop PC and associated software and systems
  • To be able to use motor vehicle knowledge to fulfill customers’ requirements
  • Four GCSE’s at Grade D or above including Maths and English (or equivalent)
63

Toponymist, Apprentice Resume Examples & Samples

  • Qualified candidates will possess an ILR Skill Level Two certification for reading (DLPT5 2/2) in the respective language
  • 1 - 3 years’ work experience
  • Qualified candidates should also have experience using ArcGIS or GeoMedia Pro; crating shapefiles, geo-databases; utilizing native maps, secondary source maps, and historic maps for extraction and comparison; mapping imagery for stereo and mono extraction at various resolutions; and, expertise in research and information gathering
  • Active TS SCI clearance is required
  • Specific experience processing geographic names following agency policies and procedures is highly desired. Ideal candidate must be a self-starter and capable of working independently with minimal supervision and guidance. Candidate must be able to multitask and deliver quality products within specified timelines. Candidate should work well as part of a team effort
64

Apprentice Resume Examples & Samples

  • Must pass Federal-Mogul proficiency and TMA entrance exams (industrial math, reading and Bennett)
  • Proven ability to learn and retain knowledge of the use of precision machines and instruments
  • Good manual dexterity and detail oriented
  • Self-motivated; must demonstrate a positive attitude
  • Must be team oriented and possess good communication skills
  • Excellent safety, attendance and performance record
  • Participation in a pre-apprenticeship program
65

Field Service Apprentice Resume Examples & Samples

  • This position is primarily a Field Service Engineer in training
  • Responsibilities include the completion of special assignments and projects related to the installation and service of Hologic products (incl. mammography, digital mammography, bone densitometry, and mini c-arms) which include electrical, mechanical and software components
  • Complete all assigned remedial service actions, standard system checks, and required hardware and software upgrades in accordance with approved policies and procedures
  • Assist other Field Engineers as necessary
  • Provide product and technical support at conventions, trade shows and customer trials
  • This position will require the ability to travel throughout the U.S. for extended periods of time
  • This position is intended to be 12 months in duration, culminating with promotion to FE and permanent assignment to a specific service district
  • Must be a self-starter, able to travel and work independently and be capable of setting priorities and scheduling work activities
  • Ability to resolve problems, and communicate professionally in high pressure, time sensitive, customer environments
  • Willing to work flexible hours and overtime on short notice
  • Position requires the ability to be on call after normal working hours
  • Must have reliable transportation, and possess a valid drivers license
  • Must be able to lift a minimum of 50 pounds
  • Strong computer literacy, must be proficient with DOS and Windows, certified training and/or working knowledge of UNIX /NT/Solaris or other software operating systems preferred
66

Costing Apprentice Resume Examples & Samples

  • Give Support to the Lead Costing Specialist on the analysis of documentation, preparation of proposals and budgeting of equipment to be manufactured in the factory
  • Contact with customers, internal or external
  • Support to the customer follow-up during the elaboration and after sending the proposal, issue invoices in the PowerMax system
  • Fresh out graduate engineer in Mechanical, Materials or similar from an accredited university
  • Strong oral and written communication skills in Portuguese and English
  • Capacity to read drawings and handle technical documentation
  • Will and ability to manage small projects
  • Some experience in manufacturing environment will be appreciated
67

Apprentice Resume Examples & Samples

  • Creation, modification and managing of BOMs (Bill of Material) and routings
  • Priority definition between different production versions
  • Check of actual capacity of production work centers
  • Management of production hierarchy
  • Check of data coming out from Hydra system and related match with SAP output (e.g. during closure phase of each and every production lot)
  • Definition and modification of production calendars both in SAP and Hydra
  • Technical degree or diploma (preferred Mechanic/Industrial Diploma or Engineering Degree)
  • Excellent use of main PC OS and applications (Windows, Office package)
  • Knowledge of mechanical design
  • Knowledge of 2D/3D CAD (Pro-Engineer package will be a preferred requirement)
  • Good level of knowledge in English Language (speech, writing and comprehension)
68

Administrative Apprentice Resume Examples & Samples

  • Makes arrangements for conferences and meetings, and assembles established background materials as directed. May attend meetings and record and report on the proceedings
  • Prepares routine non-technical correspondence, ensuring internal consistency and conformance
  • Provides general customer service
  • Maintains filing systems
  • Makes copies and creates binders for all grants and projects
  • Compiles and distributes notices
  • Runs errands and purchases supplies as directed by the Tribal Administrator
  • Transports office personnel and visitors in automobiles and passenger vans, as needed
  • Answers phones as needed
  • Assists CAC Shareholders and Descendants with CAC forms
  • Communicates with supervisor regarding progress on assigned tasks
  • Participates in CAC’s Shareholder Development Apprenticeship Program, including occasional travel to Anchorage or other locations
69

Hilton Apprentice Resume Examples & Samples

  • Contribute to high levels of customer service
  • Manage customer relations when necessary
  • Undertake any reasonable duties that may be assigned by the senior manager in the hotel
  • Complete all aspects of the training programme
70

Leisure Club Apprentice Resume Examples & Samples

  • Experience of service related/customer care environment
  • Presentable, friendly, articulate
  • Customer oriented.usiness Results
  • To ensure the club is maintained to high standard of cleanliness at all times
  • To ensure that all fitness equipment fabric, furniture and fittings are maintained in an operational safe, hygienic condition at all times in line with corporate, manufactures & safety guidelines
  • To operate programming of fitness room users, guests etc. ensuring maximum usage and member guest/satisfaction
  • To assist in the training and development of all leisure associates in order to improve associate satisfaction and retention
  • To maintain and support operational procedures set out by Leisure Operations Manager
  • Complies with Marriott LSOPs and financial audits
71

FCM Apprentice Resume Examples & Samples

  • Employees must progress to the top step rate of this position
  • To be eligible for progression increases, applicants must demonstrate satisfactory performance, complete all on-the-job training and in-house training programs established for this classification
  • Employees will be expected to work overtime in accordance with departmental requirements
  • Employees selected for this classification will be required to participate in federally mandated drug testing programs prior to selection, randomly on a year-round basis, after an accident, and for reasonable cause
72

Field Apprentice Resume Examples & Samples

  • Perform basic mechanical maintenance activities
  • Perform safe operation of maintenance mobile equipment such as forklifts, stinger trucks and overhead and mobile cranes
  • Perform work area and equipment safety inspections
  • Attend required classroom training sessions as necessary
  • Completion of, or graduation from one of the following
  • Must be able to work in a potentially stressful environment
  • Work is performed in a mine or manufacturing plant which may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, explosives, fumes or airborne particles
  • While performing the duties of this job, the employee is required to stand, sit, demonstrate manual dexterity, climb stairs and ladders, work on elevated platforms, talk, hear and see
  • Freeport-McMoRan promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing as per applicable State Laws
73

Apprentice Resume Examples & Samples

  • Learn to create quality tooling component parts including dies for stamping, assembly parts, assembly tooling, maintenance repair and prototype samples
  • Complete related classes as required by the LuK apprenticeship program
  • Completed or tested out of Machine Shop Lab 1, Math, Machine Shop Theory, Blueprint reading, and/or equivalent courses
  • Ability to lift 40 lbs
  • Skills in blueprint reading, CNC, accuracy in measurement, metal cutting practices, math and knowledge of the current quality specifications
  • Ability to prioritize and follow a schedule
74

Apprentice Resume Examples & Samples

  • Learn and assist with performing the construction, maintenance, and repairs on the electrical overhead and underground distribution and transmission system
  • Learn and assist with operating, inspecting, and maintaining aerial devices, digger/derricks, excavation equipment, and other electric line related equipment
  • Learn and observe proper safety precautions, particularly when working on or near energized circuits and with hazardous chemicals
  • Dig pole and anchor holes. Load and unload, remove and install, and transport framing poles
  • Set transformers and pull underground primary and secondary conductors
  • Assist Journeymen class with performing distribution switching, documentation and mapping information, and perform other related duties as assigned
  • Class A CDL
  • Ability to perform essential duties in an environment that entails a variety of weather conditions and extreme temperatures
  • Able to work at heights of up to 60' above ground level
  • Lifting up to 50 lbs
  • Requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, twisting, reaching above shoulder level, working in confined spaces, working off a pole or in a bucket
75

Tool & Die Apprentice Resume Examples & Samples

  • Produce engineering prototype hardware from drawings, hand sketches, and verbal descriptions of intended functions
  • Utilizing precision diametric fits and other development work for such hardware
  • Diagnosing and troubleshooting for close-tolerance/high-finish production tooling
  • Work to close tolerances, critical angles and surfaces
  • Plan, construct and repair complicated Tool Room and Cutter Grind assignments, such as jigs, fixtures, gauges and specialized tools; this includes CNC milling, turning and grinding equipment
  • Sharpen cutters, drills, reamers, and form tools, using cutter grinders, drill grinders, surface grinders, and tap grinders; working from specifications, drawings and sketches, instructions
  • Re-sharpen tools to prescribed standards according to materials to be machined
  • Modify standard cutting tools for special applications
  • Use precision measuring equipment to determine accuracy and specified dimension relationships
  • Work on new experimental cutting tools working with production and manufacturing engineering staff personnel
  • Work with designer on determination of specifications where toolmaker practices and skills experience input is critical to the end result
  • Analytical Skills: Tool and die makers need to create and read advanced blueprints to create specialized tools and molds
  • Attention to Detail: Precision is key. Tool and die makers need to make sure that their models and finished products are free of flaws to the minutest detail
  • Tool and die makers use CAD software and other computer programs to design and craft tools and die-casts
  • CNC experience is preferred in this position
  • Requires a basic understanding of materials and heat treatment operations
  • Knowledge and practice of precision diametrical fits, production of coil springs, flat springs, die-formed components and tolerance assemblies
  • Mechanical Skills: In addition to computer software, tool and die makers use a number of hand tools and large scale machines to finish their products
  • Stamina: Tool and die makers spend long hours on their feet, often bent over in the same position
  • Problem Solving: Ability to problem solve is critical in the JVS Tool & Die position
  • Multitasking: Agility to work on various projects is important in our lean environment
  • Personality: Driven, charismatic, and motivated to learn new skills in different areas
  • Tool & Die Certificate is preferred or equivalent experience in a manufacturing environment (2-5 years)
76

Year Insulator Apprentice Resume Examples & Samples

  • Display Coaching Skills; describe the industry network; recognize the importance of fireproofing and firestopping systems; recognize the various applications of various spray applications; understand commercial process systems; understand industrial process systems
  • Ability to Install a concentric reducer; install an eccentric reducer; install a square to round transition; install square to square transition; install finish on head segments
  • Perform a pan out and cut out for obstructions; install common types of elbows; install a lateral; Install box coverings
  • Interpret mechanical drawings and symbols in an industrial system; interpret ISO and P&ID drawings for the application of insulating materials; determine quantities of materials by doing a takeoff; estimate the project costs to complete a job
  • CSTS (Construction Safety Training Systems) Certification­or PST (Petroleum Safety Training) Certification
  • H2S Alive Certification
  • First Aid – Standard Level Certification
  • CSE (Confined Space Entry) Certification
  • Fall Arrest and/or Fall Protection (OSSA issued ticket is the general requirement) Certification
  • AWP (Aerial Work Platform) Certification
77

Apprentice Resume Examples & Samples

  • Positive appearance
  • Ability to work accurately and efficiently
  • Eager to learn
  • Team worker
  • Good presentation (English communication) skills
78

Apprentice Resume Examples & Samples

  • Climb ladders
  • Climb grain storage bins
  • Handle 60 lb. bags
79

Kcit Apprentice Resume Examples & Samples

  • U.S. Work Authorization
  • Minimum 2.0 Cumulative GPA
  • Enrolled in at least nine (9) credit hours OR successful completion of the Cerner Scholars Program and commitment to enroll in at least nine (9) credit hours in the subsequent semester
  • Actively pursuing an Associate’s or Bachelor’s Degree in any of the following: Information Technology, Computer Science, Computer Networking or related programs
  • Ability to work at least 20 hours a week during the school year and 40 hours a week during the summer (May-August)
  • Must reside in the Kansas City metropolitan area
  • Minimum of 2 (or more) semesters left of degree program prior to graduation
  • Proficiency in applicable operating system and database technologies, such as Linux, Unix, etc. AND/OR proficient programming knowledge
  • Strong communication skills and proven attention to detail
80

Patternmaker Apprentice Resume Examples & Samples

  • Follows all safety procedures and promotes safety as Job #1
  • Adheres to Company guidelines, rules, and policies regarding attendance, punctuality and safety
  • Supports the Work Unit Leader as directed
  • Supports plant departmental goals and their achievement
  • Maintains and promotes good housekeeping in any work area assigned
  • Makes recommendations to work unit leader for improvements
  • Complies to GIW procedures within assigned area and is trained and knowledgeable regarding current procedures
  • Monitors maintenance status of plant equipment in assigned area and reports to work unit leader when maintenance is necessary
  • Helps work unit insure that quality products are received and quality products are passed on to internal and external customers
  • Read and Interpret Engineering drawings
  • Calculate Drawing dimension to required Foundry Dimensioning
  • Inspect pattern equipment to Engineer Drawings / Foundry Dimensioning
  • Convert metric to standard
  • Interpret General Dimensioning and Tolerancing of Engineered drawings
  • Construct patterns and or support equipment from Engineered drawings
  • Dimensional layouts, full scale for equipment inspection
  • Operate woodworking equipment
  • Successfully complete apprentice training program, including all math and technical courses to include workbooks and online testing
  • GD&T training
  • Drawing/Blueprint reading skills
  • Woodworking along with experience using saws, lathes, drills, sanders, planners, etc
  • CNC knowledge a plus
  • Good communications and organization skills
  • Good attendance record a must
  • Ability to work well with a team
81

Funeral Director Apprentice Resume Examples & Samples

  • Adhere to all Company and regulatory requirements
  • Care for the deceased in a respectful manner while performing a variety of tasks which may include: transfers, lifting of deceased human remains, dressing and casketing; coordinating and assisting with funeral service and visitation, delivery of flowers, caskets, urn, photos and other personal keepsakes or mementos of client families and setting of chairs and the removal, proper care and storage of these items
  • Assist with funeral services by supervising the parking of cars, ushering, driving funeral vehicles, assisting at chapel and church services, assisting at the cemetery, floral delivery, picking up supplies, participating at special functions and other duties, as required
  • Promote a safe work environment by being aware of and practicing universal precautions and adopting general principles of safe conduct
  • Office duties such as operating fax machine, computer, multiline phone system, debit card machine, typewriter, postage meter and scale and stereo/video system may be required to be operated from time to time
  • Funeral industry experience is a plus
  • Previous customer service and/or sales experience would be a definite asset
  • Knowledge of computers and some software would be an asset, or willingness to learn
  • Good communication and problem solving skills
  • Ability to pass both the National Board exams and the State Funeral Board exams at the appropriate time
82

Funeral Director / Embalmer Apprentice Resume Examples & Samples

  • Associate's or Bachelor’s degree preferred
  • Must have the appropriate state funeral licensure or the ability to reciprocate license from another state
  • Excellent interpersonal and communication skills to interact with families during time of need and create and maintain a premier level of client family satisfaction
  • Ability to manage a caseload while creating an exceptional customer experience
83

Funeral Director, Apprentice Resume Examples & Samples

  • Learn to arrange and conduct funeral and memorial ceremonies in a professional, organized and caring manner and in keeping with Company Policies and Procedures
  • Aftercare includes delivery of death certificates, documentation, pre-arrangements for next of kin
  • Prepare documents related to services, cremations, maintenance, and any other type of data entry
  • Assist with the maintenance of vehicles, the facility and property; receive caskets and other funeral home supplies as well as place into inventory and carry out other responsibilities that may be reasonably delegated by management
  • Answer phones, prepare reports as necessary and participate in staff meetings
  • Ideal candidate has recently completed or is currently enrolled in an accredited Mortuary Program
  • Desire for FT/PT employment as an apprentice in a Funeral Director role
  • Professional and team player
84

Embalmer Apprentice Resume Examples & Samples

  • Bilingual in French and English preferred
  • Proficient with computers and technology with, knowledge of MS Office Tools
  • Excellent driving skills and record
  • Ability to lift 50 lbs or more
  • Ability to pass the Provincial Funeral Board exams at the appropriate time
85

Specification Writing Apprentice Resume Examples & Samples

  • Follow and complete the Specification Writer Apprentice Program (SWAP) to increase knowledge about Allegion customers, door and door hardware products, and specification and sales processes
  • Attend all required internal training and additional external product training to obtain a further understanding of codes, applications, and products
  • Learn organizational structure and build relationships with co-workers throughout the organization
  • Obtain an understanding of the door and hardware industry, customers, and build relationships with decision makers
  • Learn how to utilize Allegion tools/resources (for example: SpeXtra, Spec Exchange, Super Door, Siebel CRM) to gather and maintain information on projects
  • Maintain awareness of all Allegion policies, guidelines, and procedures and ensure compliance
  • Ability to learn industry specific software
86

Craft Apprentice Resume Examples & Samples

  • Our apprentices follow a three year training scheme, the first of which is spent off the job at a training school. During this year you can expect to gain a thorough grounding in the key areas, both practical and theory, required for a career in modern engineering before returning to GE Aviation Dowty Propellers
  • Both the second and third years will consist of practical training in the various disciplines of Manufacture, Repair and Engineering across all process elements. This presents an excellent opportunity for you to develop hands on skills and begin a career in the aerospace industry
  • You will be closely linked to a course of study which will, at a minimum, lead to the attainment of an NVQ level 3 qualification
  • Successful candidates should have GCSE or equivalent passes at grade C or above including English, Maths and either a Science or Technology based subject, or equivalent knowledge and experience
  • Experience and/or extra-curricular activities in a technical field, would be advantageous
  • A positive attitude with an eagerness to learn
  • Able to communicate effectively and have an aptitude for learning new techniques, methods and principles
  • Capable of prioritizing and multi-tasking
  • Capable of working to agreed schedules
  • Capable of working as part of a multi-functional team
  • Strong practical ability
87

Apprentice Resume Examples & Samples

  • Hard working and self-motivation is a must
  • Ability to work well with others and communicate effectively with co-workers on other shifts
  • Print reading, machine shop skills and demonstration of mechanical aptitude are a plus
  • Candidate will participate in a four year, 8,000 hour state approved apprenticeship program that consists of on the job training as well as related studies
  • Apprentice will apply learned knowledge of mold design and construction to machining, layout, assembly and conditioning procedures to complete tasks
  • Will be responsible for mold assembly / disassembly, PM, change over, troubleshooting, and tool making related to molds and mold tooling
  • Additional details about the apprenticeship program and our facility will be provided during an orientation meeting to be communicated after indicating interest in the position
88

Nielsen Level Apprentice Programme Resume Examples & Samples

  • Online application form
  • Numerical & competency testing
  • Video Assessment
  • Assessment Centre
89

Apprentice Resume Examples & Samples

  • Follow proper payroll and uniform procedures
  • Prepare and plate restaurant menu items according to established guidelines and Four Seasons' standards
  • Respect and accommodate the food server's requests regarding guest's personality, preference and requests
  • Handle and rotate food according to established procedures
  • Make requisitions of all items needed for the next day, with the assistance of the Sous Chef on duty
  • Maintain the work area and equipment in a safe and sanitary manner
  • Work closely with standard recipes and plate presentations in order to meet required food costs and obtain uniform quality
  • Maintain a positive attitude and a professional disposition
  • Maintain a full line of communication with supervisors
90

Apprentice Lineworker Resume Examples & Samples

  • Candidate must become proficient at climbing poles and working at heights
  • Assist line crews, utilizing lineworker tools and equipment to set poles and construct transmission lines
  • Observes, learns and performs duties of Line Worker 3/C under direct supervision
  • Residency requirement for this position
  • Ten (10) year commitment required for this position
  • Demonstrate a mechanical aptitude and ability to advance to Line Worker 1/C through progression process
  • Be physically able bodied and must be able to operate safely all Company vehicles, tools and equipment
  • Must be able to bend, lift and shovel dirt around poles
  • Successful completion of pre-lineworker qualifying Company programs
  • Must have and retain a valid motor vehicle operator's license, which does not restrict driving of off hours operations. Also, must obtain and retain a Commercial Driver's License (CDL) with proper endorsements to operate all applicable Company equipment, pass DOT physical and system hoisting certificate
  • Will be required to accept trouble shooters positions, including alternates, when qualified
91

Intern / Apprentice Resume Examples & Samples

  • Under supervision, evaluate basic customer biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety, environmental inspections and maintain effective customer relations. Follow appropriate GE policies, procedures, hospital protocol and complete necessary documentation, as guided
  • Maintain daily communications with customers as directed, to ensure resolution and proper follow-up, leading to customer satisfaction. As instructed, implement GE/customer facility contract, supporting business goals and objectives
  • May assist more experienced technicians on progressive repairs and resolution. Work as a member of local team to provide efficient service delivery to all accounts within assigned area
  • Document all repair actions and submit reports/summaries according to schedule. Maintain approved parts inventory. Manage vendor's service delivery processes in compliance with GE policies, as instructed
  • Ensure proper care of spares, tools and test equipment and ensure calibration. Enhance and maintain technical knowledge of current standards, codes and procedures regarding safe and effective use of medical equipment formal instruction
  • Meet Health and Human Services, as well as Environment Health and Safety requirements
  • Must be able to develop and maintain good customer relationships
  • Must have reliable transportation and a valid driver's license
  • Must be willing to take a drug test as part of the selection process
  • Must be willing to submit to a background investigation, including for example, verification of your past employment, criminal history, and educational background
  • Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job
  • Must be willing to work in local area during the school year and summer
  • Previous experience interpreting schematic diagrams and perform effective repair and planned maintenance on basic biomedical or electronic equipment
  • Ability to develop and maintain good customer relations
  • Analytical and communication skills with the ability to communicate technical issues to the customer in an easy to understand manner
  • Experience interfacing with both internal team members and external customers as part of a solution based service process
  • Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment in the electronic field - resulting in knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical devices
  • Change agent and process oriented
  • Local candidates strongly preferred
92

Intern / Apprentice Resume Examples & Samples

  • Work within hospital radiology environment to evaluate and troubleshoot imaging equipment issues and implement appropriate repairs
  • Complete Preventative Maintenance on designated equipment
  • Perform safety and environmental inspections ensuring compliance to Health and Human Services and Environmental Health and Safety guidelines
  • Maintain daily communications with customers to ensure resolution and proper follow-up, leading to customer satisfaction. As instructed, implement GE/customer facility contract, supporting business goals and objectives
  • Learn and ensure proper care of tools and test equipment and ensure calibration. Enhance and maintain technical knowledge of current standards, codes and procedures regarding safe and effective use of medical equipment
  • Mentor with and assist more experienced technicians on progressive repairs and resolution, and will work as a member of the local team to provide efficient service delivery to all accounts within his/her assigned area
93

Tool & Die Apprentice Resume Examples & Samples

  • Build, repair and test dies, tooling, benders, lay out, setting up, machining and finishing metal stock and castings
  • Verify conformance of repaired dies to specifications by checking dimensions, clearances and alignments, consistently working to close tolerances
  • Operate a variety of machine tools to cut, mill, grind or otherwise repair work piece to prescribed dimensions and finish
  • Operate crane to remove and/or relocate dies to specific work stations/equipment
  • Dismantle and repair or replace die parts, tooling or bender fixtures, fitting and assembling parts and testing repaired dies for proper operation, operating press as required
  • Promote and comply with health, safety, and environmental standards, safe operating procedures, good housekeeping practices and the observance of protective equipment requirements at all times
94

Apprentice Operative Resume Examples & Samples

  • Communicate with the supervisor as and when required
  • Assist in the completion of the required paperwork that is to be handed in on a weekly basis
  • Holder of a Full driving licence
  • Able to continue to learn and take on new tasks as and when presented
95

Apprentice / Trainee Resume Examples & Samples

  • Minimum of 3 GCSE’s at grade ‘C’ or above, including Mathematics & English, and either; Completed first year of BTEC National Diploma or 'AS' or 'A' levels (minimum 80 UCAS points) - preferably STEM subjects
  • Demonstrate an interest in and a desire to pursue a career in Building Engineering
  • Commitment to continued education and improvement through on-the-job learning and training opportunities
  • Creative, practical, adaptable and enthusiastic
  • Ability to demonstrate attention to detail
96

Apprentice Resume Examples & Samples

  • Plans assembly procedures, following work instruction, safety procedures and customer specifications
  • Drills, taps, or reams holes and aligns components, bolts, screws or rivets parts together during re-assembly
  • Installs moving parts, such as shafts, levers, or bearings, and works them to test free movement including final testing before shipment
  • Use of a variety of measuring devices, blue prints and visual work instruction
  • Use of a wide variety of associated shop equipment and tooling including tact weld, grinding and manual machine processes
  • High school Diploma or GED
  • Ability and willingness to work multiple shift(s)
  • Ability and willingness to work overtime, various shifts, holidays and weekends, as required
  • Ability and willingness to wear personal protective equipment
  • Ability to calculate figures, basic math and understanding of measuring and metrics
  • Ability to follow work rules, carry out instructions either written, oral, or diagram form
97

Apprentice Tube Bender Resume Examples & Samples

  • Set-up and operation of CNC rotary draw bending machines while conforming to Aerospace tolerances
  • Ensure all tube assemblies meet strict quality and compliance standards
  • Must have at least 1 year of experience with metal fabrication
  • Experience tube bending aerospace parts
  • Certificate from a metal fabrication school
  • Experience working with Inconel, Titanium, Aluminum and Stainless Steel tubes
  • Set up, operation and troubleshooting expiring on Pine or Eaton Leonard; tube bending machines
  • Well versed in manufacture of complex aerospace tube assemblies
98

Market Apprentice Resume Examples & Samples

  • Adheres to Company and Division customer service programs to meet or exceed Division customer service goals. Handles customer relations in a positive manner, including effective resolution of customer complaints and reporting to the Meat Manager or Store Director as appropriate. Promotes Albertson’s philosophy of personalized service
  • Receives and breaks down loads. Checks for quality and quantity. Maintains product quality by ensuring compliance with Company policies and federal and state regulations on storage and temperatures
  • Cuts, grinds, weighs and wraps fresh meat products according to proper procedure to ensure product quality. Controls shrink and expenses. Prevents the sale of out of date or spoiled product
  • Accurately completes and monitors daily log sheet and other required paperwork and logs
  • Maintains and organizes meat department cooler and freezer. Ensures cleanliness and sanitation of sales floor, work area, cooler, freezer, equipment and retail cases
  • Ensures that product quality, trimming, grinding, packaging, labeling, rotation and wrapping standards are met
  • Ensures proper merchandising of product by understanding and implementing schematics, merchandising of advertised items, proper signing procedures and monitoring product flow. Complies with retail labeling laws, federal and state regulations and Company policies
  • Follows Company policies in pricing and handling re-worked and reduced-to-clear items
  • Complies with all federal, state and local health, and food handling and safety standards
  • Assists customers by taking and filling special orders. Makes product suggestions and engages in suggestive selling
  • Answers and responds to incoming calls appropriately
  • Responsible for performing all job duties and responsibilities safely, accurately and with honesty and integrity
  • Other necessary and required duties
  • Ability to be friendly, courteous, tactful and maintain composure in dealing with customers and co-workers
  • Requires working knowledge of all job duties within the Meat Department including cutting, wrapping, steaming, grinding, cubing, tenderizing and customer service
  • Ability to communicate orally and read and follow written work assignments
  • Requires a good understanding of overall company practices and Meat Department policies and procedures. Requires the ability to judge and react to business activity
  • Must have knowledge of product variety, standards, perishability, food safety, sanitation, labeling and department policies and procedures
  • Frequently reaches, lifts, stacks and maneuvers objects of varying dimensions and weights up to approx­imately 80 lbs. Bends, stoops and reaches frequently and occasionally climbs ladders. Pushes and pulls fully loaded hand trucks, high boys and pallet jacks. Performs repetitious arm movement to prepare and package products
  • Manual dexterity and good eye-hand coordination are necessary
  • Mental alertness is necessary to ensure safe and accurate completion of work activities
  • Requires knowledge of basic mathematics and weights and measures. Must have knowledge of taste, content and perishability of products, safety and sanitation procedures and department policies and procedures
  • Operates computer software and electronic ordering devices to input order and inventory and print labels
  • Utilizes saws, cutters, grinders and other cutting and wrapping equipment. Utilizes cleaning supplies and equipment. Utilizes safety cutters. Requires use of safety gloves
  • May be required to work nights, weekends and holidays. Scheduled hours will vary. Good attendance is required
  • Exposure to potential hazards exists with respect to cutting equipment and other work aids necessary to perform job duties
99

DHL UK Foundation Programme Assistant Apprentice Resume Examples & Samples

  • Strong organisation skills – coordinating multiple projects and activities, often with tight deadlines
  • Excellent written and verbal communication skills - writing concise case studies and communicating confidently with DHL colleagues
  • Presentation skills – to support with the delivery of presentations to small groups of DHL colleagues
  • IT literacy and accuracy – strong attention to detail utilising Microsoft programmes to capture and circulate information
  • A flexible and methodical approach – working independently and in a small team to support multiple priorities
  • Experience of volunteering or supporting a UK charity or community group - desirable
  • 5 GCSE A-C (or equivalent) – essential
  • 2 A-levels (or equivalent) – desirable
  • A full UK driving licence - desirable
  • A DBS check will be required once in the role
100

Printing Maintenance Apprentice Resume Examples & Samples

  • Inspect and repair pneumatic, hydraulic, electronic, electrical and mechanical systems on printing machines
  • Complete work assigned by Group Leader or Supervisor
  • Maintain neat and orderly appearance of shop and printing machine
  • Assist other departments as requested by Group Leader or Supervisor
  • Maintain and enforce all company safety, environment and Department of Heath requirements
  • High School diploma / GED equivalent
  • Willingness to complete an apprenticeship program or be a certified Maintenance Mechanic
  • Dependable and motivated with good prior work experience
  • Ability to lift 50 pounds at a minimum of 10 times per shift and lift 50 pounds over shoulder height occasionally
  • Ability to occasionally climb on and off a forklift safely and without assistance
  • Ability to work at heights (with or without fall protection). Must not be at risk for sudden alterations in consciousness
  • Able to climb ladders safely and without assistance for a minimum of 15 times per shift
  • Able to use both hands for effective manipulation of tools/parts
  • Able to stand/walk for 7 hours of an 8-hour shift
101

Apprentice Front of House Assistant Resume Examples & Samples

  • Working effectively as part of a hospitality team
  • Maintain food safety when storing, holding and serving food
  • Serve food at the table
  • Prepare and clear areas for table service Employment rights and responsibilities in the Hospitality sector
  • Prepare and clear the bar area
102

Front of House Apprentice Resume Examples & Samples

  • Maintenance of a safe, hygienic and secure working environment
  • Give customers a positive impression of yourself and your organisation
  • Serve alcoholic and soft drinks
  • Prepare and serve hot drinks using specialist equipment
  • Prepare and clear areas for table service
103

International Apprentice / Trainee Resume Examples & Samples

  • Commercial Airline Information Management
  • Satellite navigation
  • Military communications
  • Military targeting
  • Military Signals Intelligence
  • Requirements Management (Capture, Analysis, Articulation, Allocation, Apportionment, and Configuration)
  • Attendance at project reviews
  • Creation of Functional and Physical System Architectures
  • Preparation of Specifications
  • Preparation of System Test and Integration Specifications
  • Integration of hardware and software
  • Trials of equipment in the laboratory and field
  • Liaison with Customers, equipment suppliers and subcontractors associated with a programme
  • Technical Responsibility: Take responsibility for producing high quality technical products
  • Commercial Responsibility: Ensuring on-time delivery of tasks within budget
  • Professional Conduct: Conduct oneself in a professional manner and in accordance with Rockwell Collins Values
  • Grade A or B in GCSE English
  • Studying for a degree in in a Numerate, Scientific or Engineering subject ; You will have completed Degree modules in the following key areas
104

General Affairs Apprentice Resume Examples & Samples

  • Level: BAC+2
  • Service minded
  • Pro-Active, convincing
  • Self-reliance, drive
  • Good analytical thinking, accurate
  • Team player, flexible
  • PC skills (MS-Office + Data-base software)
  • English verbal/written a must
105

Hotel Apprentice Resume Examples & Samples

  • Must be regionally mobile
  • English fluency (communication skills) with good command in 1 local language
  • Commitment to delivering high levels of customer service
106

Apprentice Resume Examples & Samples

  • Media Management Operations duties include
  • Acceptance into the Apprenticeship program via official channels
  • Tangential experience in technical communications or video production
  • A successful candidate should have appreciation, enthusiasm and some knowledge of baseball (specifically Major League Baseball)
  • Candidate must be self-motivated and disciplined
  • Be extremely organized, demonstrate initiative and an ability to complete multiple assignments in a timely manner
107

Level Production Apprentice Resume Examples & Samples

  • Drilling, reaming and countersinking
  • Riveting and bolting
  • Use of automated drilling equipment
  • Component assembly installation
  • Functional testing of mechanical systems
  • Manufacture and assemble aircraft components from composite materials, including sub-assembly and CNC automated activities
  • Operation of CNC controlled auto-fibre placement machines
  • Use of automated cutting and drilling equipment
  • Composite lay-up techniques
  • Understanding of processes, procedures & engineering drawings
  • Operation of 3, 4 & 5 axis CNC Milling machine tools
  • Operation of manual drilling and turning machine tools
  • Operation of Co-ordinate Measuring machines (CMM), as well as hand-held conventional and digital measuring equipment
  • De-burring, Polishing and Part Marking
  • Understanding of processes, procedures & Engineering drawings
  • Manual and automated cutting techniques
  • Forming and joining techniques
  • Fabrication of metallic components
  • Operation of CNC forming machines
  • Use of precision measuring equipment
  • To be employed by and work for the company
  • To observe the company’s terms and conditions of employment
  • In both work and training, to be diligent and punctual and attend courses, keep records and take tests to be determined by the company in order to achieve the training objectives and quality gates
  • To behave in a responsible manner and in accordance with the requirements of Health & Safety legislation relating to the individual’s responsibilities
  • To promote the company’s name and image with respect and diplomacy
  • To successfully complete all activities documented in the Apprenticeship Training Agreement
108

Advanced Apprentice Resume Examples & Samples

  • About our Apprenticeship Scheme
  • We offer a 4 year Advanced Apprenticeship Scheme where
  • O No prerequisite experience required but a demonstrable interest in engineering through school or hobby interests
  • Academic Entry Requirements
109

Apprentice, Production Resume Examples & Samples

  • Maintain plant safety standards, it’s our first priority
  • Performing process quality control checks
  • Monitoring high speed equipment and processes
  • Driving fork trucks
  • Loading supplies into machinery
  • Recording process data, we’re a data and information driven company
  • Performing minor maintenance
  • Industrial cleaning and sanitation
  • Read, monitor, and interpret performance metrics. At AB, we’re never satisfied and are always looking to improve upon ourselves
  • Adhering to Standard Operating Procedures (SOPs)
  • Ability to engage in physical activities and manual labor, as required, including but not limited to: prolonged standing, walking, lifting, pushing, pulling and bending
  • Must be able to lift items up to 50 pounds
  • Must be able to work in varying temperatures and climates
  • Must be able to work varying shifts on weekends and/or holidays (days, afternoons, and midnights)
  • Proficient with Microsoft Office applications (Excel, Outlook, PowerPoint, etc.)
  • Prior production, warehousing, or related experience
  • Mechanical aptitude
  • Continuous improvement experience
110

Apprentice, Production Resume Examples & Samples

  • Must be computer proficient
  • Must be able to continuously stand, bend twist and lift items up to 75 pounds
  • Highly motivated, self-directed person that is able to work in a fast pace environment. Key Performance Indicator (KPI) ownership in designated work area
  • A clear understanding and demonstrated knowledge of safety policies and procedures
111

Pre-apprentice Resume Examples & Samples

  • Basic electricity and the function, operation, troubleshooting and repair of complex equipment through use of drawings and instructional manuals. Basic math including geometry, trigonometry and algebra
  • Equipment maintenance skills; inspection and maintenance of heavy equipment; basic welding and fabrication; basic computing; personal communication; interactive teamwork; conflict resolution
  • Ability to maintain high productivity with minimal supervision; perform heavy manual labor in adverse conditions; communicate effectively; establish positive working relationships in a team-based environment; respond to emergencies in excess of normal working hours; and perform other duties/tasks as assigned
112

Nuclear Apprentice Resume Examples & Samples

  • Relocation assistance is not available for this position **
  • Ensure efficient and reliable operation of station equipment through preventive maintenance, predictive maintenance, corrective maintenance, and troubleshooting activities on non-safety and safety-related plant equipment
  • Perform investigation of failures/deficiencies on plant equipment with Engineering Department and Shop Supervisor and vendors in order to correct problems and improve reliability of plant equipment
  • Perform Quality Control (QC) activities
  • Participate in the Maintenance Training Program as required
  • Continually improve the quality of mechanical maintenance procedures through the established feedback and revision processes
  • Assist training as a subject matter expert in reviewing and preparing training materials and mock-ups
  • Work shift work in support of maintenance activities as required and the potential to work as a job lead for mechanical maintenance jobs
  • Incumbent is accountable for miscellaneous other responsibilities as assigned or required
  • Must meet position requirements and demonstrate competency through the established testing procedures
  • Ability to utilize computer-based maintenance management system
  • Ability to read and follow procedures and mechanical drawings/prints is required
  • Ability to use powered and non-powered hand tools proficiently is required
  • Ability to plan work to maximize production is required
113

R&D Apprentice Resume Examples & Samples

  • Develop R&D skills appropriate to a modern FMCG environment including formulation, processing, packaging and consumer understanding
  • Accountability & Responsibility
  • Growth Mindset
  • Consumer and Customer Focus
  • Bias for Action
  • Building Talent & Teams
114

Apprentice Resume Examples & Samples

  • Qualified to the standard specified above depending on your chosen trade
  • Robust work ethic and willingness to take responsibility for personal, academic and vocational development
  • Safety conscious and show high levels of reliability, punctuality and dependability
  • Ability to work effectively as a part of a team and build strong relationships with co-workers
115

Apprentice Mamf Resume Examples & Samples

  • To maintain Plant and Equipment at Optimum performance and provide utilities to Manufacturing Department and General Plant to achieve yearly plan
  • Follow all Health and Safety Rules and Regulations in the plant
  • Report any current or potential hazards to your immediate supervisor/dept. manager immediately
  • The correct Personal Protective Equipment (P.P.E.) must be worn at all times. Consult the appropriate SOP where required
  • The Apprentice Fitter is responsible for consulting any SOP’s for any job task he/she may carry out and ensure they fully understand and adhere to the SOP
  • Housekeeping is a critical function of all jobs and the Apprentice Fitter is expected to ensure all housekeeping activities are observed and carried out appropriately. It is important that the Apprentice Fitter is in adherence to the Housekeeping SOP
  • It is important that cGMP is a main priority in any operation carried out in this job function
  • Carry out maintenance and trouble shooting on plant and equipment under supervision
  • Carry out installation and commissioning of plant and equipment under supervision
  • Use diagnostic tools for condition monitoring of Plant and Equipment under supervision
  • Carry out engineering work orders in a timely and safe manner while maintaining adherence to cGMP and full compliance with procedures
  • Complete all work order forms in full
  • Carry out plant preventative maintenance programme as scheduled and maintain Maximo
  • Fully complete all P.M’s plant forms
  • Follow correct procedure when carrying out hotwork & confined space entry ensuring work permits are fully complete and in compliance with SOP’s
  • When working on equipment ensure the correct lockout – tagout procedure is adhered to
  • Ensure adherence to Working from Heights Code of Practice is followed
  • Develop in-depth working knowledge of all plant equipment
  • Maintain equipment in utilities to ensure compliance with environmental regulations
  • Maintain workshop and work area in a clean and tidy manner
  • Assist in the development and training of apprentices
  • Perform a detailed hand over of work to colleagues when shift completed
  • This Job function will change where update procedures to cGMP, EHS, Technical / New Equipment, Quality Procedures & SOP’s are made
  • To complete training and review of SOPs on compliancewire
  • To support plant on all business excellence activities
  • Print forms from Teamcentre as required
  • Work with the maintenance team to keep an updated Asset Register of plant equipment
  • Minimise downtime in production and utility areas
  • To install, inspect, adjust, lubricate, troubleshoot and repair all plant and equipment. To perform routine PM checks on equipment and maintain plant at optimum performance
  • Pass Leaving Certificate
  • An ability to read diagrams
  • Six months on the job experience
  • Ability to work on platforms, scaffolding & ladders
  • Good mental ability to logically follow a line of thought for problem solving
  • Carry out maintenance tasks under supervision
116

Apprentice Administrator Resume Examples & Samples

  • Taking notes, requiring intense concentration over lengthy periods, analysing and interpreting complicated information which is also sensitive/ disturbing / highly confidential, such as note taking at Child Protection conferences
  • Analyses technical financial information relating to the team specialism and draws conclusions to process varied tasks appropriately. For example, analyses information relating to a client's assessment or service’s budget and suggests appropriate action according to the individual situation in line with procedures
  • As a member of a resource pool, undertake a range of tasks. Allocate work to other members of the resource team to manage workloads across the team. This will include duties covering busy reception on a rota basis
  • Remain up to date and compliant with all relevant organisational procedures, policies and professional codes of conduct in order to uphold standards of best practice
  • Provide some on-the-job training to colleagues on specific aspects of the provision of an administrative service or systems
117

Apprentice Tower Services Resume Examples & Samples

  • Support tower construction and antenna and line installation activities as directed,
  • Ability to read site plans and tower drawings
  • Distribute, pick up and organize tools and materials
  • Complete work in a timely and efficient manner as delegated by Construction Supervisor and Foreman
  • Perform construction activities as directed
  • Keep safety barriers correctly installed
  • Must be able to satisfactorily complete all aspects of SBA’s Tower U training classes
  • 0-1 years tower construction / climbing experience
  • 6+ months general labor or construction experience
  • Ability to operate a motor vehicle
  • Standing ninety percent of the day
  • Ability to walk, stand and bend
  • Ability to climb 180 to 350 feet
  • Ability to work on job site in remote location for extended periods of time
  • Tasks are regularly performed with exposure to outdoor weather conditions
  • Risk of electrical shock and radiation
  • Very loud noise levels equivalent to earth moving equipment and jack hammers
118

Apprentice Civil Services Resume Examples & Samples

  • Install, connect and test underground and above ground grounding systems
  • Moderate flat-work concrete forming, pouring and finishing
  • Carpentry and miscellaneous trade skills
  • Landscaping, grading, and fence construction as necessary
  • Work with Construction Supervisors and Foreman to analyze job requirements such as labor and materials
  • Complete work in a timely and efficient manner as delegated by Construction Supervisors and Foreman
  • Work with Construction Supervisors and Foreman to maintain a safe job site
  • Assist fellow employees in completing tasks on a teamwork basis
  • Must be able to work overtime to include Saturdays, Sundays and evening hours
  • Other project and duties as assigned
  • 0-2 years construction experience required, preferably telecommunications
  • Commercial/residential electrical experience preferred
  • Ability to hear, understand and respond appropriately to verbal requests made in person and over the telephone
  • Ability to reach and stretch
  • Ability to lift up to 75 pounds
  • Ability to walk, stand, bend and climb
  • Work near mechanical parts
  • May work in high, precarious places
  • Occasional loud noise levels equivalent to earth moving equipment and jackhammers
  • Please view Equal Employment Opportunity Posters provided by OFCCP
119

Graduate & Apprentice Manager Resume Examples & Samples

  • Experience of working within the apprentice framework
  • Experience of recruitment practices and policies
  • Exposure to early careers course development
  • Experience of working with graduates and managing expectations
  • Good diary management
  • Exposure to a variety of government / industry bodies funding models
  • Able to work & interact with senior stakeholers
  • Previous Early Careers experience in a fast paced organisation
  • Up to date knowledge on key HR trends and legislation
  • Driving License
  • Travelling and overnight stay will be required
120

Apprentice Joiner Resume Examples & Samples

  • Must be able to demonstrate good numeracy and literacy skills
  • Must be able to demonstrate good practical skills
  • Must be able to follow instruction
  • Must have good organisational skills
  • Must demonstrate a commitment to the apprenticeship scheme, completing all required packages/workbooks as well as attending off site sessions as required throughout their training
  • Needs to be able to evidence forward thinking to know how their career will progress
  • Must be able to work within the Hard Services team and assist engineers in their day to day tasks
  • Must have good interpersonal skills and display a high standard of integrity and responsibility
  • Demonstrate the Engie values of Drive, Commitment, Daring, and Cohesion
  • The Electrical Apprentice will work as part of an electrical mechanical team which is part of a wider Hard Services team. This team carries out planned and reactive tasks as required to support the contract
  • Must be able to work closely with Engie team to complete day to day tasks and report to the M&E Sup and HSM to discuss their progression
  • A-C grades in English, Maths and Science subjects
  • Demonstrate a passion for engineering
121

Apprentice Resume Examples & Samples

  • Knowledge of equipment operation and pipeline construction
  • Candidate must have mechanical ability and be able to do physical labor
  • Maintain a valid driver's license
122

Industrial Maintenance Apprentice Resume Examples & Samples

  • Inspect and repair pneumatic, hydraulic, electronic, electrical and mechanical systems
  • Perform preventive maintenance procedures as specified in the QSI system
  • Complete work assigned by Group Leader or Asst. Group Leader
  • Maintain neat and orderly appearance of shop and production machines
  • Obtain parts in emergency cases
  • Assist in other departments as requested by Group Leader or Asst. Group Leader
  • Seek training to stay current with job requirements
  • Assume control of machine when a situation arises which has potential for personal injury or rapid deterioration of machine
  • Maintain and enforce all company safety, environmental and department of health requirements
  • Hearing sufficient to recognize and respond to shouted warnings, alarms and horns on forklifts
  • Stereoptic vision of 20/40 or better and peripheral vision of 70 degrees or greater and ability to read 10 12 point font at a distance of 12-18 inches
  • Ability to lift 45 pounds at a minimum of 10 times per hour
  • Able to work independently and with others in a potentially isolated area of the building
  • Knowledge on mechanical systems, pneumatic, and electrical systems in addition to troubleshooting same
  • Able to accept responsibility for work performed
  • Dependable and motivated
  • Able to participate in an apprenticeship program
  • Ability to work at heights (with or without fall protection). Must not be at risk of sudden alterations in consciousness
  • Able to climb ladders safely and without assistance for a minimum of 10 times per day. Must not be at risk of sudden alterations in consciousness
123

Apprentice Resume Examples & Samples

  • Take part in all the production aspects of the projects in the office
  • Produce draft design drawings for projects
  • Produce CAD drawings
  • Carry out design calculations for checking and approval
  • Compile tender packages including drawings and specifications
  • Ensure Safety Health and Environment procedures are implemented
  • Minimum of 3 GCSE’s at grade ‘C’ or above, including Mathematics & English, and either; Completed first year of BTEC National Diploma or AS or 'A' levels (minimum 80 UCAS points) - preferably STEM subjects
  • Ability to think in a methodical way to design, plan and organize parts of projects
  • English language proficient, holding excellent communication skills to present information in speech, drawings and reports
  • Qualifications in STEM subjects would be advantageous
124

Apprentice Resume Examples & Samples

  • Production of CAD (Computer Aided Design) drawings using Autodesk AutoCAD
  • Production of 3D models using Autodesk Revit
  • Supporting the administration of projects
  • Assisting with data review and analysis
  • Ensuring drawing outputs are accurate and meet the required standards
  • Meeting agreed deadlines
  • Working as a member of a team
  • Contributing to providing solutions to problems
  • Promoting AECOM’s vision and values throughout their day to day activities
  • GCSE Maths, English and Science, grades A-C , and/ or either; Completed first year of BTEC National Diploma or AS or 'A' levels - preferably STEM subjects
  • An aptitude towards software-based engineering and drawing e.g. Computer Aided Design (CAD) and other similar 3D software
  • An interest in and a desire to pursue a career specifically in Structural Engineering
  • A creative, practical, adaptable and enthusiastic character
  • The ability to think in a methodical way to design, plan and organize parts of projects
  • Qualifications in STEM subjects advantageous
125

Apprentice Resume Examples & Samples

  • Production of CAD (Computer Aided Design) drawings
  • Preparation of simple civil engineering calculations
  • Supporting the administration of projects, including maintaining records
  • Ensuring outputs are accurate and meet the required standards
  • Show an aptitude towards software-based engineering and drawing e.g. Computer Aided Design (CAD) and other similar 3D software
  • Demonstrate an interest in and a desire to pursue a career specifically within Civil Engineering
126

Industrial Maintenance Apprentice Resume Examples & Samples

  • Responsible for ensuring proper electrical functioning of plant equipment and machinery
  • Support operations by maintaining equipment at optimal condition
  • Perform preventative maintenance on the equipment as needed and overhauling the equipment when necessary
  • Assist with plant maintenance, repair, and installation operations
  • Troubleshoot and determine appropriate repairs, replace defective parts as needed, and maintain machinery and mechanical equipment
  • Assemble, install, test, and inspect machines and equipment
  • Regular and predictable attendance, the ability to safely perform tasks, and adherence to all safety policies and procedures are essential functions of your job
127

M&E Apprentice Resume Examples & Samples

  • Attend college and successfully complete coursework and assessments leading towards a College based qualification
  • Achieve a range of nationally recognised core skills and additional on the job competencies through work shadowing and support from an experienced mentor
  • To carry out work as required, to achieve the learning outcomes specified in the apprentice personal training plan leading towards a nationally recognised level of technical competence
  • Work towards and achieve a nationally recognised vocational qualification
  • To develop a wide understanding of both the company and the Business Sector they are in
  • Act at all times in accordance with the requirements
128

Apprentice Administration Resume Examples & Samples

  • Support your Manager and the staff under your control
  • Maintain a good working relationship with Client and other Stakeholders, if applicable
  • Manage and control your section of the work according to the agreed programmes and
  • Be conversant with all drawings, specifications and related information for these works
  • Assist the Administration team with ad-hoc tasks as required i.e. scanning/ uploading documents to internal database
  • Co-ordinating the arrival of training course attendees and meeting attendees
  • Co-ordinating welfare arrangements for training course and other meetings
  • Updating training records when required
  • When covering Reception ensure all visitors to the Project Office are greeted in a professional manner, signed into the visitor book, issued with passes and held in waiting area until a member of the team is available to see them
  • Operate the switchboard and ensure all incoming calls are handled in a professional manner
  • Maintain the reception area to project a professional image for Costain
  • Assist with the management of the project meeting room diary
  • Assist with the opening and distribution of incoming mail
129

Collision Apprentice Resume Examples & Samples

  • 90% OEM parts usage
  • 90% of the vehicles you fix will be BMW
  • Top pay for the top tech
  • Very little LKQ or Aftermarket partsYour CareerWe recognize that our success begins with yoursCritical to our success is your success. We invest in you with on-going training and we want you to grow with us. We’ve created an environment that fosters continuous growth and development.Take action and Apply Today and get your career on the fast track!
130

Tool & Die Apprentice Resume Examples & Samples

  • Perform light duties of repair of variety in-house tooling including progressive dies, blanking, piercing, and compound dies with the guidance from Toolmaker B, Toolmaker A, and Senior Toolmaker. Supports the department PM program
  • Work from sketches, prints, die design layouts, piece part drawings or actual parts using reverse methods of tool making
  • Follow instructions and plan accordingly to use most efficient procedures and methods to accurately machine parts under the guidance of senior tool maker
  • Set up and operate most tool Room equipment to a high degree of accuracy and close tolerances with minimum or no guidance from supervisor or senior toolmaker
  • Work closely with pressroom die setters to understand the process of die setting and how it influences die performance
  • High school diploma or equivalent from an accredited institution
  • Possess a degree or certification in a precision machining field
  • No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Ellisville, MO will be considered
  • Possess excellent mechanical aptitude
  • Experience working in a manufacturing environment particularly in a press room
131

Apprentice Greenskeeper Resume Examples & Samples

  • To assist under supervision with routine maintenance tasks and to operate Golf Course equipment and agricultural machinery to assist in maintaining the Golf Course
  • To maintain a safe and equitable working environment and to work harmoniously with team colleagues
  • To be responsible for, under supervision, the carrying out of the day to day maintenance of all operating equipment under your control
  • To maintain accurate records, under supervision after carrying out cultural practices and applying fertilsers
  • To perform other duties as directed by their managers / supervisors, to meet the needs of the business
  • A keen and positive attitude
  • Willing to learn new ideas
  • Must be able to work outside in all weather conditions
  • Physical strength, with the ability to follow oral and written directions
  • Must be able to start work early in the mornings
  • Must be flexible with working hours
  • Must be able to work at weekends on a strict roster system
  • Incorporates safe working practices in job performance
  • Has a basic understanding of health and safety
132

Apprentice Accountants Assistant Resume Examples & Samples

  • Deliver assigned work with support without errors or the need for rework
  • Escalation of issues as they arise
  • Ensuring compliance of all activities undertaken with the Group’s IMS system
  • Delivery of assigned work to programme, budget and quality
  • Technical quality of the elements assigned
  • Qualifications required to gain entry to the HND / HNC in Accounting
  • Minimum GCSE Grade C in both English and Maths (or equivalent) plus 3 other relevant subjects
  • Proficient knowledge and use of MS Office suite, in particular MS Excel, having the ability to produce formulae and export data
133

Apprentice Resume Examples & Samples

  • Ensure prompt and courteous service is extended to internal customers
  • Prioritize all telephone calls and visitors, scheduling appointments as required
  • Assist all human resources activity
  • Provide all administration duties for the human resources office
134

Apprentice Resume Examples & Samples

  • Assisting to Prepare, cook and service all food items for a la carte andor buffet menus according to hotel recipes and standards
  • Ensure the cleanliness and maintenance of all work areas, utensils, and equipment
  • Have full knowledge of all menu items, daily features and promotions
  • Follow kitchen policies, procedures and service standards
135

Apprentice Resume Examples & Samples

  • Assist all marketing communication literature is current and updated
  • Provide all administration duties for the marketing communication office
  • Basic knowledge Adobe Illustrator, Photoshop are plus point
136

Administration Apprentice Resume Examples & Samples

  • Day to day running of the admin office encompassing helpdesk and telephones
  • Provide good customer service to clients, general public, staff, suppliers and sub-contractors
  • Assist with the effectiveness of admin equipment (fax, photocopier, printers and basic office supplies)
  • Keep admin office tidy and in good order
  • General admin duties including photocopying, typing, upkeep of the visitors log and issuing of site instructions, helpdesk job records
  • Dealing with ad hoc management requests
  • Provide admin support
  • Cover the helpdesk desk when required
137

Apprentice Intake Resume Examples & Samples

  • Understanding and interpreting drawings especially assembly drawings
  • Use of all kinds of hand tools for mounting and dismantling machine elements
  • Use of heating and cooling during mounting and dismantling machine elements
  • Use of tooling machines for the production and adaptation of machine elements
  • Doing repair welding
  • Making electrical connections and disconnections during repairs and maintenance operations according to current regulations
  • Fitting and building machines and electro-mechanical equipment, pneumatic, and hydraulic components
  • Working up and interpreting technical drawings
  • Use of machine elements, testing/measuring equipment, hand tools and small machines for building and assemblage
  • Repair and maintenance of machines and equipment
  • Use of different fastening methods and screw connectors, oils and lubricating equipment
  • Working according to working instructions, drawings/schematics and WPS (welding procedures)
  • Handling materials, manuals and tools for working the materials
  • Executing welding processes using standard methods
  • Maintenance and troubleshooting of welding equipment
  • Identifying, measuring, installing, and testing components for completing drilling operation
  • Installing completion equipment
  • Quality control of equipment and documentation
  • Control checks, maintenance, and repairs of equipment used
  • Submitting written completion documentation for work completed
  • Independently perform installations, repairs, maintenance and troubleshooting for industrial and other automated low-voltage systems
  • Calibrate test equipment and signal converters, and assemble necessary proof of calibrations
  • Repair, replace, adjust and check all materials that are a part of automated systems, including mechanical work-ups and assembly
  • Install and re-build in automated processes or electro-mechanical systems
  • Make necessary alterations on guidance and interlocking systems, and document these procedures
  • Initiate operations and do functions testing of for example automated processes, robots, machines, and systems
  • Optimize the work process and spot the potential for improvements in process guidance and controls
  • The installation, operation and maintenance of various electronics systems and computer systems
  • The use and handling of equipment, software, information and data
  • Establishing communication between different types of equipment and systems
  • Security, troubleshooting and communications problems
  • Advice to customers for choosing and using equipment and systems and adapting the equipment/systems to the customer’s needs
  • Compilation of documentation adapted to the client and providing instruction
  • Service, customer handling and guidance
  • Written and oral information
  • Organization and flow of knowledge in document and information management
  • Purchases, budgets, accounts and payrolls
  • Office support systems, and systems for administration and case work
  • Use and maintenance of technological office equipment
  • Service, information, guidance, customer management, communication and ethics
  • Order processing, storage and packing
  • Preparations for dispatch
  • Securing of goods and cargo
  • Weight limitation and weight distribution in transport
  • Efficient and secure transport of goods and cargo
  • Management and transport of goods that require special treatment
  • Use of manual and electronic tools for transport, the flow of goods, and document management
  • Use and maintenance of technical equipment
138

Apprentice Resume Examples & Samples

  • Reporting maintenance issues and deficiencies, and resolving these issues where appropriate
  • Resupplying amenities as needed
  • Using hands to lift, carry, or pull objects that may be heavy
  • Reporting, delivering and storing lost and found items in accordance with hotel policies and procedures
  • Maintaining excellent grooming and uniform standards
  • Reading, understanding and following all department policies
  • Other reasonable duties as assigned by supervisors or management
139

Funeral Director / Embalmer Apprentice Resume Examples & Samples

  • Minimum 2 years of experience as an Embalmer, Apprentice or Funeral Director, Apprentice in a funeral firm or embalming facility
  • Basic knowledge of religious and fraternal organizations customs
  • Knowledge of computers and some software including MS Office products required
140

Maintenance Apprentice Resume Examples & Samples

  • Completes emergency, preventive and predictive maintenance tasks
  • Troubleshoots mechanical breakdown situations in order to eliminate future occurrences
  • Performs a wide range of operations connected with maintenance, repair and installation of equipment and mechanical lines (water, gas, air, etc.)
  • Maintains work area, shop floor and equipment in a neat, clean and orderly condition
  • Completes records, forms and data entry as required by job
  • Strives to eliminate any unscheduled equipment downtime
  • Maintains consumables and replacement part inventory
  • Rigging, moving and installing of equipment
  • Responsible for accuracy of preventative and predictive maintenance program
  • Actively participate in continuous improvement efforts as they relate to quality, safety 5S, environmental and production efficiency
  • Other duties as assigned by team leaders, shift supervisors or management
  • Minimum of five (5) years related manufacturing maintenance experience
  • Knowledge of Fork Lift Operation
  • Basic knowledge of use of gage blocks, micrometers, indicators, etc
  • Knowledge of hydraulic and pneumatic systems
141

BTD Tooling Apprentice Resume Examples & Samples

  • Displays ability to read all measurement tools
  • Operates machines in the tool room efficiently
  • Helps saw, mill, grind and turn steel for multiple new jobs to required dimensions
  • Drills holes or saws shapes in die sets or steel, per instruction list given
  • Performs various setups on the tool room equipment, to accomplish basic machining methods
  • With assistance pulls dies apart, disassembles, then reassemble correctly
  • Operates grinders to sharpen die sections, punches, square up blocks, and put shear on die components
  • Makes shim for die sections
  • Grinds down punch blanks to replace broken punches with basic shapes
  • Performs minor revision changes to existing tooling, with the assistance of a toolmaker
  • Builds basic press brake tooling, drill, machine, weld and check fixtures, with the assistance of a toolmaker
  • Uses the welder, and Acetylene torch, with guidelines established by the toolmaker
  • Performs all duties in a safe manner, complying with safety rules and regulations
  • Keeps work area safe and clean
  • Uses Axapta software programs to enter time/payroll information, job information, etc
142

Systems Administration Apprentice Resume Examples & Samples

  • Minimum of 3 Standard Grades at Level 3 or above (to include Maths and English)
  • Demonstrate excellent interpersonal and communication skills
  • Positive and flexible attitude
  • Ability to demonstrate strong work ethos both individually and as part of a team
143

Apprentice Funeral Director Embalmer Resume Examples & Samples

  • Observe and assist the Funeral Director in consulting with client families or legal representative of the deceased to create services designed to meet their memorialization expectations
  • Ensures that client families are presented with all merchandizing and service options available
  • Obtains information needed to complete required documents such as obituaries, death certificates, burial permits, and insurance
  • Participate in all service arrangements and details with clergy, other presiding persons, fraternal or military organizations, and others who may participate in conducting the funeral service
  • Utilizes systems to record merchandise selections, enter contracts, and complete necessary forms
  • Assists with planning and scheduling of visitations and services
  • Under direction of licensed Funeral Director, participates in preparation of the deceased: dressing and casketing
  • Assist with placing caskets in visitation area, adjust light fixtures, and arrangement of flowers or plants
  • Take part in directing and ushering families and service attendees to and from the location of the funeral service
  • Assist in the transportation of client family to ensure a timely departure and arrival
  • Assist with arranging and coordinating shipment of remains to and from other cities and locations
  • Works on-call /first-call, as needed
  • Appropriately uses corporate support
  • Identify and remedy all hazards on grounds
144

Quantity Surveying Degree Apprentice Resume Examples & Samples

  • BSc (Hons) Quantity Surveying
  • Chartered Surveyor status with the Royal Institute of Chartered Surveyors
  • Industry certificates in Site Supervisors’ Safety Training Scheme, Site Managers’ Safety
  • Training Scheme and Site Environmental Awareness Training Scheme
145

Apprentice Resume Examples & Samples

  • Retrieve and review tooling prints for material and machining requirements
  • Perform some aspects of the tool/die build as directed by the Tool & Die Maker
  • Assist in modifications to existing tools and dies to maintain customer requirements
  • Assist in the maintenance and repair of tools and dies as required
  • Assist in troubleshooting problem tools and effect changes as directed
  • Work is completed through use of milling machines, drill presses, assorted grinders, band and cut-off saws, lathes, lay-out tables, measuring equipment and heat treat ovens
  • Responsible for the completion of daily time sheets
  • Successfully complete all aspects of the Tool & Die Apprenticeship program
  • Completed a Tool & Die program diploma
  • Current enrolment in the Tool & Die Apprenticeship program would be an asset
146

Maintenance Apprentice Battery Resume Examples & Samples

  • Ability to set up and operate drill press, grinder, power saws, welder, etc
  • Capable of operating precision hand tools, and electronic equipment
  • Must complete the NCCER certification
  • Required to provide hand tools and equipment to perform normal maintenance tasks
  • Take active part in group meetings to maintain safety, quality, and increase productivity and morale
  • May perform other duties as directed by management
  • 1 year Manufacturing experience
147

Apprentice Coppersmith Resume Examples & Samples

  • Must qualify for Modern Apprentice programme criteria (as detailed onSkills Development Scotland)
  • General computer system knowledge and experience preferred – ability to functionally use Microsoft packages such as Excel, Word, PowerPoint are beneficial
  • Full UK driving license is preferable but not essential
148

DR Apprentice Resume Examples & Samples

  • Enrolled in Medical School
  • Solid history of achievement in school and work
  • Leadership and team-building abilities
  • Firm grounding in public sector issues
  • Willingness to travel (required)
  • U.S. Citizenship
  • Ability to acquire U.S. Security Clearance
149

Apprentice Resume Examples & Samples

  • Provide PCI program support to ensure maintenance of PCI certification
  • Working with other Agiliti technology teams to ensure security processes are adhered to, e.g. patching processes, internal vulnerability assessments
  • Manage information security support tickets
  • Provide support to the Security Incident Management Response process, assist with investigations, ensuring clear audit trails of issues and resolutions
  • Assist with entitlement access reviews
  • Supporting information security & technology projects
150

Pre-apprentice Resume Examples & Samples

  • Assisting a journeyperson with maintenance and training activities in a timely manner
  • Work closely with the mechanic in conducting preventative and corrective maintenance of the building, machinery, and equipment
  • High school diploma, vocational background or industrial experience preferred
  • Ability to lift and move 50 lbs
  • Mechanical knowledge & knowledge of current quality specifications
  • Skills at efficiency and problem solving
151

Bench Joinery Apprentice Resume Examples & Samples

  • Assembly of machine manufactured joinery components to comply with working drawings using compressed air and battery / powered tools
  • The joinery Apprentice will report to the joinery workshop manager, but be partnered to a qualified tradesman, who will oversee his learning experience
  • Will be expected to work both within a team and on own initiative, under supervision
  • Read and carry out work from drawings and specifications
  • Undertake joinery work including marking out, fabrication, light machining; chop saw and Dimension saw and fitting and finishing (sanding)
  • Carry out all work in accordance with safe working practices as set out in Risk Assessments and Method Statements
  • Carry out work in workshop/building having regard for Health and Safety issues and for the building occupiers working environment
  • The joinery Apprentice will be expected to understand and be familiar with relevant safety legislation
  • The Apprentice will be expected to produce a second year and/or final year competition piece for the National Association of shopfitters Apprentice Awards – it would be anticipated that the company will provide some time to work on the design piece, but also the apprentice will work on their own initiative, in their own time to fulfil the task
  • To fill out timesheets accurately and on a regular basis – as directed
  • It is envisaged that the joinery workshop will start to use PDA (electronic handheld devices) to receive and record work and this will be a requirement for this role. Relevant training will be provided
  • To work in a flexible manner and carry out duties, provide cover or assistance to other members of the workshop team as may be required by the joinery workshop manager and/or Senior Management Board
  • Desire to be a bench joiner and understand what the job entails
  • Ability to read 2D and 3D drawings
  • Focus on quality manufacturing
  • Competent to work on own initiative
  • Work closely in a tight knit team
  • Take direction from senior members of the team /mentor as directed
  • Pro-active in improving systems of work and fabrication techniques
  • Be punctual and presentable at all times, whether in the workshop or at college
  • Be flexible in their working times to suit business needs – overtime hours will be paid for additional hours worked
  • Demonstrate a desire to work towards the successful completion of an approved craft apprenticeship in carpentry and joinery and attain NVQ Level 3 (preferred) – a day away from the workshop will be provided to attend college – this may also involve evening classes and homework
  • CSCS Card for on-site work – if directed – Training would provided (Desirable)
  • A GCSE in Woodwork / Technology / Art / Design (Desirable);As the position is for an Apprentice no previous job experience is necessary, however the Ideal candidate will demonstrate evidence of part time / full time employment working within a team
  • Be able to demonstrate a desire to become a bench joiner, either through photographs or examples of projects, whether they are with a company or for friends / relatives / schoolwork
  • Work in Solid Surface (Corian/Avonite/ Wilson Art/Staron/Hanex etc.)
  • Curved work and laminating
  • Pre-Veneered panel working
  • Understanding of FSC / PEFC chain of custody
  • Use of hand tools
  • Use of small power tools (and compressed air) to include, drills, screwdrivers, routers, sanders, trimmers, biscuit jointers and jigsaws
  • Adhere to requirements of manual handling
  • Have a full driving licence or capability to travel to Poole College for training
  • Be prepared to visit site on occasions as directed to assist in specialist finishing i.e. solid surface jointing
  • Be flexible on hours of working dependant on work load and deadlines
  • Demonstrate that they possess a basic tool kit to include; tennon saw, hammer tape measure, square, marking knife, chisels, hammer, screwdrivers, block plane and smoothing plane and oilstone
152

FM / JM / Apprentice Ironworkers Resume Examples & Samples

  • Must be a Journeyman Ironworker or valid apprenticeship ticket from a recognized provincial training authority
  • Must have rigging experience
  • Must have experience working at heights
  • Must Must possess a valid form of government issued Driver's license
  • Physical strength, stamina and the use of proper lifting techniques required to manage heavy materials and stand for long periods
  • Ability to read and understand complex instructions
  • Local candidates only as there is no LOA/Travel
153

Digital Apprentice Resume Examples & Samples

  • Canada Goose
  • Nokia Withings
  • Tata Communications
  • PwC
  • Dorchester Collection
  • Meda
  • Quorn
  • Excellent quantitative and analytical skills with the ability to draw conclusions based on data
  • Strong organisational skills and ability to prioritise tasks
  • Ability to work well under pressure, working accurately with attention to detail, and meeting deadlines
  • Ability to be flexible and “hit the ground running”
  • Interest in digital media
  • Confident using various technology platforms
  • Strong Microsoft Office skills including Excel (pivot tables, VLOOKUPs)
  • Ability to work collaboratively as part of a cross-functional team
  • Ability to investigate, analyse & solve problems, and clearly communicate results
  • Experience with statistics and related analysis methodologies a strong plus
154

Trade Apprentice, Chiswick High Road Resume Examples & Samples

  • Hobbies
  • School work
  • Projects at home
155

IT Apprentice Resume Examples & Samples

  • 4 GCSE grades A-C (or equivalent), including maths & English
  • Organised and methodical approach to work
  • Able to work under pressure and to deadlines
156

Apprentice Resume Examples & Samples

  • Have PR or Citizenship for Australia or New Zealand at the time of application
  • Completed year 12 (by January 2017) or pre apprenticeship equivalent
  • Your own transport is preferred for Sydney based roles
  • Be able to complete and successful pass pre-employment background and drug screening
157

CS&Q, PE Apprentice Resume Examples & Samples

  • Qualification of parts, including withdrawal test, torque tests, endurance, and various tests as per switches and sockets standards requirements
  • Strong failure mode analysis and root cause analysis
  • Audit requirements
  • Good Root Cause Analysis
158

Student Apprentice Resume Examples & Samples

  • Maintains safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concerns
  • Performs all duties as assigned and adheres to TEAM's Core Values of
  • Safety First – in everything we do
  • Integrity – means doing the right thing
  • Service Leadership – throughout the company
  • Innovation – supports continuous growth and improvement
  • Pride and Respect – for ourselves and our company
  • Sawing
  • Milling
  • Tapping
  • Make ready
  • Transposes alpha numbers to cut parts
  • Other duties as defined by supervision
  • Prefer a high school diploma or equivalent
  • Must be able to read a tape measure
  • Must possess good basic math skills
159

Apprentice Resume Examples & Samples

  • Performs and trains others in preventive maintenance on all residential heating, air conditioning and ventilation equipment
  • Assists in sealed system HVAC or advanced appliance repair as part of training and development
  • Performs advanced clerical duties necessary to complete requests for service
  • Maintains advanced Company stock and equipment
  • Advanced knowledge in tools and material related to the service field
  • Advanced skills in communication
  • Advanced skills in sales of all services offered by Company
  • Advanced skills in servicing of appliances or heating and air conditioning equipment
  • Advanced skills in customer relations
  • Advanced skill in servicing gas/electric water heaters
  • Three (3) to four (4) years work experience or combination of time in accredited trade or vocational training program equaling three (3) to four (4) years in basic service for heating, ventilation and air conditioning
  • CFC certification I and II, Maryland State HVAC Journeyman License and Gas Fitter Card
160

Prototype Precision Apprentice Resume Examples & Samples

  • Requires an Associate of Science degree in Machining or a Certificate of Achievement in Machining or proof of a combination of both classroom instruction and practical machining experience
  • Ability to read blueprints and make part sketches
  • Must have excellent math skills
  • Must have excellent oral and written communication skills in English
  • Must have an interest in how mechanical devices work
  • Must be able to lift and carry equipment weighing 50lbs. Able to climb a ladder and work standing for long periods
  • Must have excellent manual dexterity
  • Must have color vision correctable to 20/20
  • Must have or be able to obtain a California driver’s license
  • Must have an interest in mechanics and be willing to learn about new materials, new technologies and high vacuum systems
161

Tool & Die Apprentice Resume Examples & Samples

  • 1) The trainee must become proficient in each of the following in order to successfully complete the program
  • 2) The trainee must also successfully complete the following classroom training administered by the Rock River Valley Tooling and Machining Association with all classes conducted at Rock Valley College in order to complete the apprentice program
  • 3 years of experience in a manufacturing environment
  • Must be able to lift, pull, and push minimum of 30 pounds
  • Must have positive communication skills, both verbal and written
  • Possess willingness and flexibility to perform a wide variety of support tasks within organization
  • Demonstrated proficiency with personal computers
  • Must possess ability to maintain positive attitude and perform in a team environment
  • Flexibility to work on any shift
162

Production Apprentice Resume Examples & Samples

  • The position requires the incumbent to learn and demonstrate proficiency of the operational procedures of the melting department (the 57 series of the Standard Operating Procedures)
  • In addition, the incumbent must learn all safety and emergency procedures applicable to the job
  • The incumbent will work directly with a Lead Melter, Tech II Melter or Tech I Melter until judged to be proficient enough, in a particular procedure, to work independently on the tasks of the procedure
  • The incumbent must provide and ensure a safe working environment through cleanliness, good housekeeping and adherence to all environmental health and safety policies
  • Learn to process Titanium reclaim
  • Must participate in and complete all required training programs
  • Seeking opportunities for improvement and taking corrective action on his/her own initiative
  • Actively participating in the continuous improvement process, owning their idea through the PDCA cycle, including asking co-workers for their input
  • Immediately resolving a quality issue or seeking technical expertise to resolve the issue, if necessary
  • 6+ months of manufacturing experience is a plus
  • Experience using a variety of hand and power tools
  • Ability to use basic math, grasp statistical process control
  • Basic operation of computers
  • Good written and oral communication skills as well as sound judgment are required since this position functions in a complex operating environment
163

Apprentice Resume Examples & Samples

  • The intern will have opportunity to work in a challenging company. In six months of assignment, the intern will get a broad overview of the daily activities in Commercial/Services area. The intern will learn about key processes and will develop specific competences
  • Issuance of requests for facts and submissions
  • Issuance of policy requests and recovery management
  • Issuance of purchase requisitions
  • State control and engineering delivery
  • Logistics (delivery of equipment on site)
  • Currently enrolled at University in a Civil, Industrial, Electric Engineering career
  • Academic Excellence
  • Confident Microsoft skills - Outlook, Excel, Word and PowerPoint
  • Curious, flexible and open minded
164

Advanced Apprentice Resume Examples & Samples

  • Possess a strong commitment and enthusiasm to the role and the apprenticeship
  • Strong interest in engineering and technology
  • Good manual skills and the ability to operate machinery
  • Good level of computer literacy
  • Care and attention to detail, adhering to all health and safety requirements
165

Furniture Medic Apprentice Resume Examples & Samples

  • Assess damages and choose the appropriate method of repair for case goods, leather, fabric, and upholstery
  • Perform various furniture service duties to include the repair and refurbishment of all case goods, upholstery, and leather products
  • Ability to use techniques such as use of fillers, burn-ins, color matching, structural repairs, and installation of replacement parts
  • Demonstrate a high-level of attention to detail and professionalism at all times
  • Ability to travel over the road for after purchase repair in the homes of customers
166

Site Management Apprentice Resume Examples & Samples

  • A minimum of 5 Standard Grades and 2 Highers preferably grade A – C or equivalent vocational qualification
  • CSCS Card Holder (preferred)
  • Awareness of Health & Safety
  • Hard working
  • Pride in your work
  • Determination to succeed
167

Apprentice Resume Examples & Samples

  • Study IT fundamentals in networking, troubleshooting, linux and more
  • Develop and apply advanced troubleshooting techniques to provide unique solutions to our customers’ individual needs
  • Interact with leading technologists around the world
  • Work directly with Amazon Web Service architects to help reproduce and resolve customer issues
  • Refine and leverage your customer support experience to provide feedback to internal AWS teams on how to improve our services
  • Collaborate with the team to drive customer communication during critical events
  • Understand and contribute to projects that improve support-related processes and our customers’ technical support experience
  • Hone your skills by working on critical, highly complex customer problems that may span multiple AWS services
  • A+ Certification
  • Self-starter who is excited about technology
  • This position requires the applicant selected be a U.S. citizen who has served in the Armed Forces
  • Understanding of Linux/Unix Systems administration (Ubuntu, CentOS, RedHat, Solaris, etc)
  • Understanding of Networking (TCP/IP, DNS)
  • Exposure to Virtualization (VMware, Xen, Hypervisor)
  • Exposure to Cloud computing
  • Exposure IPsec, VPN, Load Balancing, Iperf, MTR, Routing Protocols, SSH, Network Monitoring / Troubleshooting tools
  • Exposure to managing full application stacks from the OS up through custom applications
  • Understanding of programming / scripting exposure (Java, Perl, Ruby, C#, and/or PHP)
168

Service Apprentice Resume Examples & Samples

  • Assists with installing new or modified equipment at customer's facility to ensure full functionality
  • Reviews reports, work orders, and documentation from customers and night patrol representatives
  • Inspects malfunctioning or damaged product to assist in determining nature and scope of problem
  • Helps troubleshoot and repair sign equipment and structures
  • Prepares and uses materials consistent with specifications of job service order
  • Operates welding equipment to weld sign parts together
  • Implements and maintains quality control and safety during service
  • Glues sign parts together
  • Bends and shapes sign parts according to service specifications
  • Performs duties to ensure department meets expectations and deadlines
  • Drives YESCO sign and equipment service vehicle
  • Keeps shop area organized, clean and free from debris to maintain a safe working environment
  • Ability to read, interpret, and apply specification documents, government coding document information, safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to apply geometric and algebraic mathematical calculations
  • Ability to move, lift, and carry materials, equipment, parts, and completed projects
169

Apprentice Resume Examples & Samples

  • Ability to communicate with others in a professional matter
  • Student at a tourism program or similar
  • You enjoy planning and working in projects
  • Passionate about IT tools
  • Fluent in Swedish and English
170

Maintenance Apprentice nd Shift Resume Examples & Samples

  • Perform scheduled maintenance on assigned equipment
  • Make preventative maintenance check and inspection of assigned equipment, report to shift supervisor, and take appropriate action
  • Oil and grease equipment. Examine defects and analyze spoilage causes
171

Sprinkler Installation Apprentice Resume Examples & Samples

  • Assist Sprinkler foreman with installation of fire sprinkler systems, including start up through final testing
  • Follow verbal and written instructions in English
  • Carry/move equipment and tools weighing up to 50 pounds
  • Must be able to work from ladders and lifts up to 40 feet or more
172

Administration Apprentice Resume Examples & Samples

  • Have a willingness to develop as part of structured training programme
  • Customer service skills / good people skills
  • IT literate, good numeracy and literacy skills
  • A polite telephone manner
  • Willingness to learn and keen to progress within Kier
  • Able to undertake work activities in a safe manner in compliance with the Kier Safety, Health and Environment management system and not compromising the health and safety of their colleagues, subcontractors, the client and members of the public
  • 4 GCSE’s grades A-C’s (or equivalent) including Maths and English
  • Good standards of written and verbal communication
  • Self-motivated and organised
  • Telephone skills
173

Generation Specialist Apprentice Resume Examples & Samples

  • Basic electricity and the function, operation, troubleshooting and repair of complex equipment through use of drawings and instructional manuals
  • Maintenance of power plants
  • Basic welding and fabrication
  • Basic computing
  • Personal communication
  • Interactive teamwork
  • Heavy equipment operation (trucks, loaders, backhoes, graders, etc.)
  • Maintain high productivity with minimal supervision
  • Perform heavy manual labor in adverse conditions
  • Communicate effectively
  • Establish positive working relationships in a team-based environment
  • Respond to emergencies in excess of normal working hours
  • Perform other duties/tasks as assigned
174

Field IT Apprentice Resume Examples & Samples

  • Organised, Diligent & Thorough
  • Courteous and friendly manner
  • Customer focussed
  • Excellent time keeping
  • Comfortable working as part of a team and with a wide range of people
  • Flexible approach to work with a willingness to learn on the job
  • Willingness to work hard
175

Innovation Centre IT Apprentice Resume Examples & Samples

  • Good interpersonal skills, a confident communicator (verbal and written). This is needed to deal with a variety of individuals from sales, customers, through to CEOs, both internal and external
  • Ability to both work well in a team and also independently, but importantly to tight deadlines with a keen “customer first” focus and attention to detail
  • Good working knowledge of Windows Operating Systems and Microsoft Office
  • Knowledge of TCP/IP networking plus awareness of network infrastructures and how they are built
  • Advanced problem-solving skills – strong analytical thought process needed to trouble-shoot issues, often under pressure due to it being a customer-facing environment
  • Python would be helpful
  • Willingness to learn new skills
  • Important to be able to manage own workload – plan, prioritise and meet deadlines
  • Customer-facing experience would be helpful
  • AV / sound operator skills would be advantageous
  • Important to show initiative and be proactive
  • Sense of humour
  • Work ethic
176

Apprentice Site Manager Resume Examples & Samples

  • Reporting to a Site Manager you will have an ability to prepare site documents to the high standards expected of on the contract and ultimately manage work gangs
  • The position may from time to time require contact with the client and the general public therefore face to face and written communication skills are essential
  • Ensuring the health and safety of yourself, the workforce and the public is the most important aspect of this role and you will demonstrate an ability to maintain the existing high standards within the company
  • An ability to interpret contract documents including contract drawings and B.O.Q.s&#8217
  • Educated to GCSE level with 5 subjects, including Maths, English and a Science to Grade A
  • Clean driving licence
  • Experience managing people
  • Computer literate – MS office
  • ‘People skills’ experience working in a team
  • A good communicator with the ability to instruct and direct staff
  • A good organiser, both of self and others with the ability to think in advance
  • Self motivated and able to motivate
  • Grade A - C in GCSE Maths and English
  • Minimum 2 other appropriate subjects Incl a Science to GCSE Level Grade A - C
  • Willing, enthusiastic and flexible in their approach to work
  • ‘Can do – will do’ attitude
  • To be diplomatic, patient and understanding with members of the public
  • Able to undertake their work activities in a safe manner in compliance with the KierWSP health and safety management system and not compromising the health and safety of their colleagues, subcontractors, the client and members of the public
177

Printing & Reprographics Apprentice North Tyneside Resume Examples & Samples

  • Working towards an Intermediate Level 3 Diploma in Business and Administration over 12 months, whilst gaining valuable transferrable skills through practical work experience within our Reprographics department
  • Typical duties may include some, or all, of the following list of duties
  • Ensuring adequate and appropriate operation of a variety of reprographic equipment and associated software
  • Operation of electronic work control system and provision of manual backup when required
  • Photocopying and printing- black & white and colour
  • Ensuring floor plate copiers are adequately resourced (paper and toner)
  • Providing a high quality collating, cutting, finishing and binding service
  • Laminating documents
  • Using CD and DVD copiers to process work
  • Maintaining equipment and liaising with external suppliers to carry out repairs
  • Ensuring cleanliness of equipment and a safe working environment
  • Ensure an accurate high quality output with precision to meet pre-booked deadlines and customer expectations
  • Using network copiers to process work
  • Archived scanning using high volume scanners
  • Advising personnel on general reprographic queries
  • Meeting printing requests of Council, internal and external customers
  • Taking control of stock supplies and deliveries as required
  • Ideally have achieved, or expected to achieve, 4 GCSE grades A – C or equivalent in Maths and English
  • Not have a degree level qualification
178

Print Finishing Apprentice Resume Examples & Samples

  • An enthusiastic and “can do” attitude
  • The ability to pass a Maths and English test equivalent to GCSE level
  • Ability to work a variety of shifts, including nights
  • Keen to learn new skills
  • Enjoys working in a close team
  • Confident and pro-active
  • Experience of working in a Print or Manufacturing environment
  • Candidates must be able to demonstrate a pre-existing right to work and travel within the EU. Documentary evidence will be requested at interview
179

Apprentice Resume Examples & Samples

  • To safely and efficiently operate all deck and towing machinery and equipment onboard the vessel
  • To have a working knowledge of all safety equipment onboard, and to be able to use in an emergency situation
  • Be able to steer the vessel if required, under normal and emergency situations
  • To follow statutory and regulatory guidelines as laid down by the Company, MCA and other external bodies
  • Carry out routine maintenance as directed by the Master or Engineer on board including rope-work and general seamanship tasks
  • Maintain basic working knowledge for the use of the VHF radio communications with customers, pilots and port authorities
  • Handle and stow stores and supplies in an efficient and timely manner
  • Build working relationships with customers, pilots, port authorities and agents, and to take part in any operational meetings as required
  • To take ownership of all areas of the vessel, as directed by the Master and/or Engineer including internal fabric maintenance
  • To undertake training as required to attain a minimum qualification of AB and then STCW’95 Inshore Tug Watch-keeper (Deck and/or engine), and thereafter to Master and/or Engineer
  • To carry out duties in a professional, responsible and adaptable manner, with flexibility of operation as required to fulfil current manning and vessel operational requirements
  • Any other duties as reasonably assigned by the Company from time to time
180

Higher Apprentice Quantity Surveying Resume Examples & Samples

  • To manage and lead the cost aspects complex construction projects
  • To ensure that comprehensive study has been undertaken of the whole life aspects of the project and the understanding of the client’s needs
  • To manage the selection of the specialist contractors for the project
  • To manage the commercial success of a project for all stakeholders
  • HNC Quantity Surveying
181

Apprentice Maintenance Resume Examples & Samples

  • Receive incoming maintenance material and physically place in inventory
  • Scanning and enter all receiving paperwork into JD Edwards (inventory tracking software)
  • Reconciling invoices against receipts and services provided
  • Inventory stocked parts for reordering. Cycle counts
  • Pull from inventory, “kit” parts for Preventative Maintenance program
  • Assist mechanics with repairs and PMs When needed. Hand on position
  • Interface with suppliers for quotes and delivery of parts
  • Assume all duties and responsibilities to maintain an active stock room
  • Forklift certified, or ability to be trained
  • Performs general housekeeping duties in area assigned. Ensure a safe environment
  • Ability to work assign shift, flexibly to support maintenance and production demands
  • Strong computer skills. Ability to learn and use JD Edwards
  • Work with basic hand tools safely
  • Meet company attendance requirements
  • Work overtime when required
  • Follow all GMPs for this facility
  • Work safely. As an individual and in a group
  • Follow all “Lock out, Tag out” procedures
  • Attention to detail. Follow up with proper documentation
  • Willingness to learn and be a key team member
182

Apprentice Mech Operator Resume Examples & Samples

  • Operating and maintaining air compressors, pneumatic and hydraulic equipment and tools, portable generators, pumps, heavy duty electric drills, core drill machine, and other such equipment
  • Assisting in the installation of shoring and sheathing in excavations
  • Utilizing communication devices to transmit and receive information
  • Assisting in setting up work area protection
  • Operating power chain saws
  • Reading gauges and changing charts
  • Utilizing and reading tape lines, rulers, and other measuring devices
  • Utilizing and evaluating results from electronic instruments such as curb box locators, pipe locators, cathodic protection instruments, oxygen indicators, insulphones, and/or meters, etc
  • Locating, cleaning, raising, lowering, replacing lid, or other parts of curb box and/or test connection box
  • Verifying service stop-cock for accessibility
  • Preparing records, such as daily time reports, service stopcock accessibility report and vehicle maintenance requests, etc
  • Obtaining corrosion control pipe-to-soil potential reading and completing field reports
  • Operating lawn type tractors and other power mowing equipment making minor repairs as required
  • Performing work assignments in accordance with departmental instructions, procedures, policies, and standards
  • Performing work assignments in a manner which will properly safeguard the public, employees, and property of others in the Company
  • Training by performing various operations under the direction of more skilled personnel
  • Instructing other employees in this or less skilled classifications to properly and safely perform their duties
  • Performing other similar or less skilled work, as assigned
  • Must have had twelve (12) months’ work experience in the installation and/or maintenance of natural gas distribution mains or services
  • Must meet the required pre-employment test standards for this job classification
  • Must demonstrate the ability to perform the duties of this job through the medium of tests designed for measuring individual qualifications
  • Must obtain a Commercial Drivers License within 6 months and DOT Medical Card within 60 days
  • Must be capable of driving pick-up trucks, utility vans, passenger vehicles, crew trucks, and dump trucks
  • Must be able to write and print legibly
  • Must be willing to participate in Company training programs
  • Must be able to read street maps and travel to dispatched locations
  • Must have the physical stature and stamina to operate power driven hand tools; excavate and shovel earth, backfill materials, etc.; lift heavy construction objects, etc
  • Must have a keen sense of smell and adequate hearing
  • Must possess tact and a suitable personality for customer contact
  • Must be capable of utilizing leak detectors, test pumps, gauges, and utility-tape electronic equipment
  • Must be capable of utilizing communication devices
  • Must be capable of correctly and accurately using measuring devices, such as: tape lines, rulers, pipe calipers, etc
  • Must be capable of reading gauges and changing charts
  • Must be capable of utilizing and evaluating results from electronic equipment
  • Must be capable and willing to render first aid, artificial resuscitation, etc
  • Must be capable and willing to use fresh air masks and wear protective clothing
  • Must be capable and willing to utilize computer based systems for anyone hired after January 1. 2012
183

Apprentice Resume Examples & Samples

  • Predominantly be involved in the hot & cold larder section
  • Assist in the preparation and running of the buffet as directed
  • Rotate between different sections of the kitchen to assist as directed
  • Following the directions of the senior/qualified chefs of the kitchen sections
  • Ensure your follow hygiene and safety procedures
  • Be an active learner, ask questions and listen attentively to ensure you enhance your skills and knowledge
  • Currently completing an apprenticeship with strong academic results
  • Full Australian Working Rights is essential with no restrictions
  • 7 days a week availability and willing to work on a rotating
  • Familiarity is a busy, high volume and fast paced kitchen is desirable
184

Maintenance Apprentice Resume Examples & Samples

  • Requires completion of a high school diploma, General Education Development (GED) or equivalency
  • Requires one or more years experience hands-on general maintenance experience including knowledge of repairing equipment specific to trade: automation, electrician, electronics, HVAC, boiler, machinist, purified water, or industrial machine repair
  • A Certificate of Completion of Apprenticeship in trade (or similar occupation) or ability to complete apprenticeship program in defined period of time required
  • Demonstrated cooperative work conduct and the ability to work independently with minimal supervision
  • Strong oral and written communication skills required, including good cGMP documentation skills
  • Computer skills in Microsoft Suite and experience with Computerized Maintenance Management Systems (CMMS) such as SAP preferred
  • Ability to read and work from Blueprints, and/or schematics
  • Basic computer skills and the ability to navigate through computer based training systems and use in the course of daily work may be required
  • Must possess good math and reading comprehension skills and be able to read, speak and comprehend instructions in English or language of country as applicable, including procedure documents, as well as proofread alpha and numeric data
  • Must meet all locally defined training requirements
185

Apprentice Hts Ifr Resume Examples & Samples

  • Experience in the Inspection, Testing, Maintenance and Repair of Life Safety Equipment a plus
  • Ability to repair and service equipment sold by Vallen
  • Current Motor Vehicle License with good driving record
  • Proficient with hand tools
  • Able to complete repairs and maintenance of equipment in a timely and accurate manner
  • Able to provide assistance, advice and training to Vallen associates and plant personnel
  • Assist warehouse personnel with order fulfillment if needed
  • Maintain minimum productivity of 80% within 60 days
  • Keep all certifications and licenses current and renewed by completing continuing education as required
  • Ability to read, write and comprehend English (operational, process and quality instructions)
186

Apprentice Resume Examples & Samples

  • Machine shop experience is a plus
  • Experience in Lean Manufacturing concepts is a plus
  • Ability to effectively operate in any organizational structure
  • Strong communication skills— including verbal, writing, and listening skills
  • Must be high energy and able to prioritize and multi task in a fast paced environment
187

Apprentice Resume Examples & Samples

  • Coordinates with supervisor and lead mechanic for the purpose of completing projects/work orders efficiently
  • Diagnoses problems and/or failures in heating/air conditioning / refrigeration systems for the purpose of identifying equipment and/or systems repair and replacement needs
  • Installs heating/air conditioning/refrigeration equipment and systems (e.g. coils, pumps, controls, electric motors, etc.) for the purpose of providing comfort inside facilities
  • Maintains tools and/or equipment for the purpose of ensuring the availability of equipment in safe operating condition
  • Operates computerized energy management systems for the purpose of setting time schedules, heating and cooling settings, pump operations, and troubleshooting system failures
  • Repairs various items, systems and/or components (e.g. coils, fans, air compressors, controls, pumps, boilers, etc.) for the purpose of ensuring that items are available and in safe working condition
  • Requests equipment and supplies for the purpose of maintaining inventory and ensuring availability of required items
  • The ability to take orders from the senior mechanic on the job, and grow with the knowledge gained on the job
  • Continues to grow in the positon by taking after hour classes and seminars
  • Responds to emergency situations for the purpose of resolving immediate safety concerns. Transports various items (e.g. tools, equipment, supplies, etc.) for the purpose of ensuring the availability of materials required at job site
  • Any state and local licenses required
  • Willingness to continue training on the job and in the classroom
  • Willing to learn and grow in the trade
  • Intense knowledge of HVAC/Plumbing
  • Strong sense of the geographic service territory
  • Must be able to work well in a team-oriented environment
  • Must be service-oriented and sales minded
  • Must be resourceful and excel at problem resolution
  • High school diploma required, technical school preferred
188

Apprentice Resume Examples & Samples

  • Supporting with Project reporting
  • Supporting with AD-hoc reporting
  • Ownership and/or influence on policies and strategy
  • Navigator reporting – producing weekly timesheet reports
  • Supporting with internal asset/device audits
189

Apprentice Resume Examples & Samples

  • This person will work in the following departments during the 4 year Apprenticeship: Mold Base, CNC Lathe, CNC Mill, Grinding, Polishing, EDM'ing
  • Operates various conventional machine shop equipment such as lathes, mills, grinders, vertical and horizontal saws to produce and detail a variety of small parts ranging from simple to complex which are within prescribed tolerances
  • Operates Computer Numerical Control (CNC) vertical mills, and lathe with Fanuc controller
  • Performs machine set-ups, adjusting speeds, feeds, and depth of cut, to machined parts to specifications set forth in blueprints, drawings, engineering orders, etc
  • Checks machined parts for conformance to prescribed tolerances
  • May be required to operate numerical control machines
  • Designs and constructs machine shop tools, dies, jigs, and fixtures
  • Interprets all types of tooling and fixture requests, converting them to sketches, and fabricating them using various mac