Production Helper Resume Samples

4.6 (77 votes) for Production Helper Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the production helper job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
PO
P Orn
Peyton
Orn
830 Elenora Fords
New York
NY
+1 (555) 163 9633
830 Elenora Fords
New York
NY
Phone
p +1 (555) 163 9633
Experience Experience
Detroit, MI
Production Helper
Detroit, MI
Rempel and Sons
Detroit, MI
Production Helper
  • Inspects parts for paint millage (thickness), performs physicals at determined intervals
  • Places or racks work pieces on conveyor
  • Maintains cleanliness of work area(s)
  • Inspects work piece for defects (welds, paint imperfections, scratches, dents, etc.), determine non-conformance, and next step of production
  • Performs other duties as directed by supervision
  • Loading material on the machine, stacking finished material, and assisting crane operator
  • Marks identifying code, kanban card, etc., on work piece to indicate destination for further processing
present
Chicago, IL
Production Helper
Chicago, IL
Borer-Erdman
present
Chicago, IL
Production Helper
present
  • Work on Continuous Improvement and support all PPI, Keys and Lean projects
  • Suggests improvements in work methods and procedures by speaking with supervisor(s) and joining PPI teams when possible
  • Plans and prepares for work load by paying attention to work in process when possible
  • Perform any other duties deemed necessary by the Management Team
  • Assist in the development of Standard Operating Procedures for their assigned areas
  • Cleans surfaces, using hand scraper, wire brush, sandpaper, etc, depending on task to be performed
  • Participates on Continuous Quality Improvement and supports PPI projects
Education Education
Bachelor’s Degree
Bachelor’s Degree
Liberty University
Bachelor’s Degree
Skills Skills
  • Able to lift at least 50 pounds
  • Ability to add and subtract using whole numbers, fractions and decimals
  • Able to work outdoors
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Obtain forklift license
  • Have a performance record that demonstrates the candidate's competence in leading people, giving direction to others, assuring that we produce high quality products, sharing experiences and ideas with others to improve the effectiveness of the operation and in holding self and others accountable for results
  • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations
Create a Resume in Minutes

11 Production Helper resume templates

1

Production Helper Resume Examples & Samples

  • Bring new pallet of rolls from the warehouse to the swivel table or roller tables utilizing a hi-low/Industrial Forklift. Swivel table is 20” high and measures 48”x48.” Pallet holds 2 horizontal rolls. Rolls on the table are 36” to center and 49” to the top of the roll. (Roll weight varies 300-550 pounds.)
  • Pull roll shaft and old core off of the bag machine and place on top of the rolls on the table
  • Pull roll shaft out of the old core and place the roll shaft inside core of the new roll. Helper will lift and carry the shaft approximately 3-5 feet. (Roll shaft with core weighs approximately 39 pounds.)
  • Place hoist strap on shaft
  • Use automatic hoist to load roll onto the bag machine
  • Swivel table requires 20 pounds of force to push on each side with 2 rolls
  • Stack cores from the finished rolls in box for recycling
  • Wrap nylon sling over each end of the shaft. Then hook sling onto the hoist and push button to lift roll up
  • Guide the roll to the bag machine while roll is on the hoist. (Hoist may require to be pulled with little- to- no resistance.)
  • Set roll into place on bag machine
  • Gather box supplies. (Box supplies are up to 87” high and weigh 28-32 pounds. Dimensions: 16”x12.5”x5.”)
  • Use carts to bring supplies as close to the machine as possible. Then carry box of rubber washers to Bag Machine, which weighs 60 lbs
  • Bring boxes to bag machines using hand-operated carts, a High-lo machine, or pallet-jack. Transportation could be up to 800 feet
  • Gather chip-board and wickets to bring to the Bag Operator. Transportation could be up to 300 feet, weighing approximately 5 lbs
  • Unstack pallets with resin cradle on them from the swivel tables and roller tables. (Weighs approximately 15-20 lbs.)
  • Remove barrels from each machine and take them to the waste dumping station. (Barrels are on a dolly and when the lock mechanism is opened, the barrel is free rolling. Employee walks approximately 50-70 feet to weigh station.)
  • Then place the barrel in the dumping sled and lock into place
  • Raise barrel and lower barrel to dump the waste using the control buttons to perform this action
  • Return completed order forms to the basket located in front of the Converting Dept Office
  • Good math skills required including fractions and percentages
  • Must be able to read a ruler and measure
  • Good computer skills
  • Sources
  • There is direct responsibility for keeping the assets supplied for continuous running
2

Production Helper Resume Examples & Samples

  • Fill in on any line as needed
  • Learn the extrusion and change over processes
  • Learn packaging procedures and materials
  • Learn string up procedures for all machines
  • Distinguish between acceptable and non-conforming products and work to prevent any roll nonconformities
  • Make a continuous effort to use all reusable materials to improve cost/productivity
  • Understand procedures for flush outs and changeovers
  • Cut product cores to tolerances specified
  • Maintain a good attendance record
  • Attend all shift meetings
  • Understand resin drawing system
  • Understand quality policy and ISO procedures for operations
  • Make continuous effort to keep machine and area neat and clean
  • Must be safety conscience at all times
  • Must read and understand written instructions in line books
  • Support line team and plant teams in continuous improvement
  • Must be able to work with and follow instructions given by the Line Operator
  • Helper has dotted line responsibility to machine operator and star point leaders
  • Take the initiative to keep line running and support operator
  • Must work with co-workers as a team member
  • Any other duties as determined by the MSO
  • Must be willing and able to work 12 hour days
  • Lifting up to 50 lbs. continuously and consistently over 12 hour period daily
  • Climbing stairs
  • Working from secured platforms of up to 40 feet high
  • Standing for extended periods of time
  • Wear all personal safety equipment required by Company policy
  • Experience in an industrial environment
  • Familiar with best practice safety procedures
  • Fork truck operations
  • Familiar with Statistical Process Control charts
  • Good mathematical skills
  • Experience with automated manufacturing equipment
  • Experience with plastic film manufacturing preferred
3

Production Helper Resume Examples & Samples

  • Operates assigned equipment in a safe manner and encourages same in others
  • Effectively communicates directly with other employees and departments the status of production in their area to ensure the safe and efficient production of the company’s products
  • Maintain good housekeeping within work area
  • Maintain appropriate operating records. Safeguards Company equipment
  • Oversees all activities and operations within area of responsibility
  • Assist in the development of Standard Operating Procedures for their assigned areas
  • Knowledgeable and compliant with all ISO-9002, RC14000 elements
  • Troubleshoots equipment problems within area of responsibility
  • Understands and implement SI Groups Safety and Quality policies
  • Participate in MOC’s, PHA’s and PSM as requested
  • Keeps up to date and compliant with all training/testing as required
  • Be willing to work a 12-hour continuous operation, and follow the appropriate guidelines for a twelve-hour continuous operation
  • Willing to work a reasonable amount of overtime
  • Must be PC literate and possess good oral and written communication skills, as well as good interpersonal skills. Candidate must maintain and exhibit good attitude, ability, conduct, etc
  • Have a performance record that demonstrates the candidate's competence in leading people, giving direction to others, assuring that we produce high quality products, sharing experiences and ideas with others to improve the effectiveness of the operation and in holding self and others accountable for results
4

Production Helper Resume Examples & Samples

  • Work from instructions
  • Assist with operations at any plant cutting or laminating station as directed
  • Remove laminated boards from conveyor, stack in bundles or designated number, make up corrugated end caps, folding and stapling materials as required to suit bundle size. Operate banding equipment to band loads and move bundles to storage area
  • Move blocks to and from storage areas as required
  • Place scrap polystyrene into grinding hopper to feed grinding operation and ensure that no foreign material enters grinder. Load storage bags of ground material from hopper
5

Production Helper Resume Examples & Samples

  • 1) Review pertinent information with the previous shift i.e. mechanical issues etc
  • 2) Straighten the product prior to the slicer
  • 3) Monitor slicer infeed to prevent jam-ups
  • 4) Take thrift or damaged product off the line
  • 5) Rack off product if line breaks down
  • 6) Pack the product into baskets in accordance with the specifications
  • 7) Remove all baskets that are broken and store in pre-determined area
  • 8) Assist the Bagger Operator and the Packaging Attendant when possible
  • 9) Put on and take off lids
  • 10) Sort Raisins
  • 11) Clean equipment
  • 12) Remove trash as necessary
  • 13) Neatly and accurately fill out all necessary documentation (Ex. HACCP – CTS)
  • 14) Maintain a safe neat and clean work area accordance with GMP and good house keeping practices
  • 15) Communicate with co-workers and supervisors
  • 16) Follow all JSA guidelines
  • 2) Environment – Noise levels will be minimal to moderate. Temperature will range from controlled to very warm. Lighting is sufficient. There is a possibility of slippery footing from wet and dry ingredients
6

Production Helper Resume Examples & Samples

  • Production Helper will assist the Machine Operator in a steel building manufacturing company (decks, roofs etc.)
  • Loading material on the machine, stacking finished material, and assisting crane operator
  • Must have manufacturing experience
  • Leather steel toed shoes are a MUST
  • Fork lift experience a plus
  • Pre-employment background and drug screen required
7

Production Helper Resume Examples & Samples

  • Performs routine tasks using standardized procedures and GMPs with an eye toward detail and quality
  • Maintains cleanliness of work area(s)
  • Position requires ability to act as a member of a highly functioning team
  • Performs other duties as directed by supervision
  • Ensures compliance with all company policies and procedures (EEO, Sexual Harassment, Safety, Sarbanes Oxley, etc.)
  • Performs other duties which are deemed by management to be an integral part of the job, including but not limited to fulfillment of work schedules, adherence to attendance policies, and other applicable operating rules, policies and procedures
8

Production Helper Resume Examples & Samples

  • Rigging
  • Holding tag lines
  • Sandblasting
  • Keeping the yard and highway clean
  • Grinding CH
  • All general labor
  • Install CT
  • Assist others when needed
  • Able to lift at least 50 pounds
  • Able to work outdoors
  • Obtain forklift license
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to add and subtract using whole numbers, fractions and decimals
  • Ability to apply common sense understanding to carry out detailed but uninvolved written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations
9

Production Helper Resume Examples & Samples

  • Understand the operation and safety features of support equipment that is to be used at the pre coating process steps
  • Perform in-process inspections of process hardware prior to coating operation
  • Assist in operational support functions (ie: bake, grit, tooling, etc) associated with processing the hardware parts to be coated
  • Make all required process paper work entries at the proper time and sequence
  • Ensuring all the operations completed meet the standards provided for that operation
  • Ability to perform necessary duties in all processes (EBPVD and PLASMA)
  • Ability to lift, push, pull, bend, squat, climb and twist hands
  • Ability to work in a confined space
  • Ability to follow instructions and multi-task
  • Quality excellence and strong work ethic
  • Organized and detail-oriented
  • Reliable, punctual, and flexible
  • Quick learner, self-starter
10

Production Helper Resume Examples & Samples

  • Verification of paperwork (incoming manifests, Invoices, SDS labels)
  • Receiving and shipping via internal and customer programs (i.e. AccuTrack, SDS)
  • Review of PO and work scope
  • Lotting and staging of parts for process
  • Shipping paperwork
  • Moderate lifting
  • Assist in Help Ticket issues
  • Communicate with inspectors, DQRs, FAA Repairmen, and Working Leaders
  • Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly
  • Embrace ACE, and contribute to achieving/maintaining goals as a team
  • Perform any other duties deemed necessary by the Management Team
  • Shipping & Receiving Experience preferred
  • Quality Excellence
  • Computer skills helpful
11

Production Helper Resume Examples & Samples

  • To check forklift condition and ensure it before use forklift based on HSEQ, Syngenta's Standards and Local Regulations
  • To deliver Packaging Material (PM) in time from warehouse based on production order and arrange the placement that focus to minimize safety issue and production flow process
  • To send Finish Goods (FG) from production result to warehouse in time and coordinate with warehouse's staff to make sure the placement is refer to warehouse layout and FIFO application
  • To control the PM and FG stacking in safe condition by avoid the elevation and stacking up more than stacking safety guidance
  • To create good relation and good working atmosphere and perform good discipline
  • Minimum 1 year to drive a forklift in Production environment
  • Handle dynamic production & warehouse condition
  • Minimum Senior High School
  • Have team work skill and result delivery driven
12

Production Helper Resume Examples & Samples

  • 2+ years experience in a production floor/manufacturing setting
  • Ability to work in a focused, safe, detail-oriented and independent fashion
  • Ability to work all three shifts any and sometimes every day of the week
  • Demonstrated ability to help drive employee engagement toward a more committed culture of safety
13

Production Helper Resume Examples & Samples

  • Removes parts/products from conveyor belt and places in rack or container
  • Moves finished pieces to storage area using caster based carts, etc
  • Removes product from conveyor and examines coating for smears, runs, incomplete painting, and similar flaws
  • Works safely to prevent on-the-job injuries by following all personal and environmental safety guidelines
  • Determines the next step in production by following OPS and places parts in designated area based on distribution needs; material handler, tugger, paint market, silk screen, etc
  • Inspects work piece for defects (welds, paint imperfections, scratches, dents, etc.), determine non-conformance, and next step of production
  • Marks identifying code, kanban card, etc., on work piece to indicate destination for further processing
  • Secures parts to skid for transition to next production area
  • Transfers items to and from work area using hand truck, jack up truck, hand carts, etc., based on part to be moved
  • Works throughout paint production areas to accomplish goals by demonstrating ability and willingness to work with others when needed
  • Places or racks work pieces on conveyor
  • Trains other on job duties, quality goals, material tracking, company guidelines, etc., and serves as a positive role model in the work place
  • Utilizes SAP shared plant-wide to accomplish and track production goals
  • Inspects parts for paint millage (thickness), performs physicals at determined intervals
  • Inspects product to verify that optional/custom changes have been made according to OPS or other internal documents
  • Pays special attention to PPE and JSA (Job Safety Analysis) guidelines based on part to be handled, etc. to insure safe handling
  • Places parts onto conveyor that carries them between spray nozzles
  • Plans and prepares for work load by paying attention to work in process when possible
  • Participates on Continuous Quality Improvement and supports PPI projects
  • Works in teams to accomplish overall plant goals regarding safety, efficiency, quality, and customer satisfaction
  • Operates hand tools equipped with air hose, hydraulic lift, etc., to accomplish production goals
  • Sets up units along conveyor line to coat metal by determining flow speed and hanging accordingly
  • Attends meetings such as safety, PPI, KEYS, start-up meetings, etc, when asked to do so
  • Cleans surfaces, using hand scraper, wire brush, sandpaper, etc, depending on task to be performed
  • Uses sandpaper, wire brush, or steel wool to remove rust from metal
  • Maintains condition of hangers/hooks, by preparing for cleaning and utilization
  • Cleans work area solvents or soap and water
  • Marks work piece with non-conforming tag to determine and type of repair needed
  • Place orders using material request order found on computer system to maintain items needed in daily production to insure constant flow with no down-time
  • Straightens parts, etc., in preparation for painting using hand tools and/or manually
  • Suggests improvements in work methods and procedures by speaking with supervisor(s) and joining PPI teams when possible
  • Touch-up or spray paint to cover scratches, chips, or repairs in finish of items
  • Maintains awareness of location and availability of job specific information found on company intranet computer system
  • Prepares parts to be hung, such as punch hook holes, etc., to enable paint processing
  • Researches MSDS information when needed to insure personal and environmental safety
  • Participates in teams and utilizes Excel spreadsheets, charts, graphs, and data analysis
  • Fastens lift chain around components to navigate and move production pieces as needed
  • Maintains organized, clean work area to promote personal and environmental safety
  • Researches routing of pieces using computer system
  • Cleans and finishes assembly products using approved cleaners/chemicals and tools according to PSS book and refers to MSDS to insure safe handling and proper PPE equipment is utilized
  • Fills MEK containers for other areas by following all personal and environmental guidelines
  • Records number and type of units rejected and reasons for rejection by completing check-list/document that tracks production results for further analysis
  • Applies masking tape over parts and areas that are not to be coated by referencing OPS, or part drawing
  • Holds and maintains fork lift certification when asked to do so
  • Implements lock out/tag out process to accomplish job duties such as oven cleaning
  • Lights ovens, turns knobs, and observes gauges on control panel to set specified temperature and air circulation in oven, synchronizes speed of conveyor
  • Perform all job duties in a safe manner and obey all safety policies and procedures
  • Perform all job duties consistent with the Code of Ethics and the 4-I Values
  • Perform all job duties within ISO standards
  • Work on Continuous Improvement and support all PPI, Keys and Lean projects
  • Perform other duties and cross training as assigned
  • High School Diploma/GED or meeting WorkKeys entry assessment levels for position and 1 year equivalent experience
  • Experience Requirements: One to three years experience in manufacturing, construction, or industrial setting
  • Previous experience with overhead conveyor paint room operations is preferred
  • Physical Demands