Inspection Manager Resume Samples

4.5 (103 votes) for Inspection Manager Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the inspection manager job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
LW
L Wiza
Leopoldo
Wiza
699 Parker Causeway
Los Angeles
CA
+1 (555) 983 6055
699 Parker Causeway
Los Angeles
CA
Phone
p +1 (555) 983 6055
Experience Experience
Philadelphia, PA
Inspection Manager
Philadelphia, PA
Gusikowski, Blanda and Gutmann
Philadelphia, PA
Inspection Manager
  • Create monthly data and perform analytics to assess inspection metrics/performance on a monthly basis
  • Monitors and guides performance of project inspection personnel and provides regular feedback to the Source Inspection Manager
  • Will interview applicants, recommend promotions and provide assistance in the evaluation and training of the inspection staff
  • Will schedule inspections or work with inspection schedulers. Manage department safety tasks such as toolbox talks, safety training and licensing
  • Assist with the leadership and management of global Regulatory Agency inspections
  • Assist with development and delivery of IR processes and tolls for CDS
  • Establish structure and resource the Project Inspection Organization in conjunction with Source Inspection Manager
San Francisco, CA
Inspection & Calibration Manager
San Francisco, CA
Schoen-Windler
San Francisco, CA
Inspection & Calibration Manager
  • Establish and maintain link with external service providers
  • Manage investigations for process deviations and out of tolerance conditions
  • Lead continuous improvement activities to ensure efficiency, effectiveness, compliance and competitiveness of the business
  • Proven track record in people management
  • Identify and deploy innovative quality inspection technologies to improve quality and generate competitive advantage
  • Lead a team of technicians and supervisors, including management of procedures and training of all employees affected
  • Manage budget, measurement equipment inventory, maintenance and service agreements
present
Boston, MA
Senior Manager, Fill Finish Inspection
Boston, MA
Heller LLC
present
Boston, MA
Senior Manager, Fill Finish Inspection
present
  • Manages and facilitates interactions and communications with internal and external client stakeholders regarding production
  • Analyzes data and results and provides conclusions and proposals
  • Employs high level technical expertise to develop new processes and creatively solve problems
  • Writes / executes inspection protocols. SOPs, Forms, and study reports
  • Provides technical support to manufacturing and investigations staff within areas of specialty
  • Researches and implements new methods and technologies to enhance operations. Suggests improvements to existing methods and procedures
  • Responsible for group metrics, analyzes results and presents conclusions to senior manufacturing management
Education Education
Associate’s Degree in Mechanical
Associate’s Degree in Mechanical
East Carolina University
Associate’s Degree in Mechanical
Skills Skills
  • Strong problem solving and decision making skills including the ability to analyze complex situations involving the competing objectives of cost and quality
  • Knowledgeable in lean manufacturing concepts and principles
  • Strong time management and prioritization skills
  • Proficient in Microsoft Office (Excel, Word and PowerPoint)
  • A sound understanding of biological vaccine manufacturing or MAb’s including but not limited to; formulation, aseptic filling & lyophilization
  • A sound understanding of how own function integrates within the organization
  • Root Cause Investigation Principles
  • Six Sigma and Lean Manufacturing
  • Technical Writing
Create a Resume in Minutes

15 Inspection Manager resume templates

1

Branch Inspection Manager Resume Examples & Samples

  • BA/BS or equivalent. Related certifications (CPA, ACA, CFA, CIA, CISA or similar) are a plus
  • Senior level experience in a related role with experience in business, functional and people management, with proven abilities in taking responsibility for executing concurrently on a portfolio of high quality deliverables to stakeholders according to strict timetables
  • Specific subject matter expertise regarding technology application control disciplines and a solid business understanding of Account Opening/Contract, Investments, Payment of Services, Deposits, Withdrawals /cash advances, Transfers, Foreign Exchange, Personal Credits and Other Services products, especially those associated with the retail business
  • Demonstrates experience in managing teams and managing integrated internal audit and assurance delivery within a matrix reporting environment
  • Effective negotiation skills, a proactive and 'no surprises' approach in communicating issues and strength in sustaining independent views. This individual must be an articulate and effective communicator, both orally and in writing, with an energetic, charismatic and approachable style
2

Inspection Manager Resume Examples & Samples

  • Oversee fire alarm and sprinkler inspectors' day-to-day tasks, recommend new hires, promotions and provide assistance in performance evaluation and training of technicians
  • Responsible for the total completion of all inspections and contract obligations, i.e. cleaning, or subcontractor work by coordinating with dispatch the scheduling of all inspection teams
  • Make sure all inspections are scheduled timely and completed on schedule
  • Work with inspections dispatch and Systems Integrity Representative in reviewing deficiency inspection reports
  • Make sure deficiencies are properly followed up on as outlined in the SimplexGrinnell Deficiency Program
  • Instruct and ensure inspectors are correctly completing Service Requests with proper coding through communicative devices, such as laptop computer and/or hard copy. Ensure that a customer signature is obtained upon completion of all assigned calls
  • Ensure that all SimplexGrinnell manuals, vehicles, tools, equipment, etc. are maintained by all inspections teams in accordance with Company procedures and policies and in a professional manner
  • Ensure that effective performance measures are assigned, and that employees are motivated to achieve and exceed objectives in a professional, timely and quality manner
  • Ensure all inspection and service personnel adhere to and follow safety guidelines and policies at all times
  • Must provide on-going safety training to all inspection and service personnel
  • Consistently exercise good customer relation skills, by dealing with customer programs or issues calmly and effectively
  • Two year Associate degree in a technical field, such as electronics or electricity, or equivalent experience
3

Inspection Manager Resume Examples & Samples

  • Oversee Sprinkler, Fire Alarm and Suppression Inspector's day to day tasks
  • Actively participate in quickly resolving internal and external customer problems
  • Maintain appropriate staffing levels to include hiring, training, employee performance, etc
  • Support and enforce safety goals
  • Manage process of maintaining inspection reports and archives
  • Manage and order department supplies and equipment
  • Support sales staff to enable us to gain new service contracts
  • Perform additional duties, as required
  • 5 or more years experience in life safety profession, plus 2 to 4 years managerial experience preferred
  • Must be able to attain NICET Level II certification
  • Demonstrated leadership with effective verbal and written communication skills
  • Proficient with standard computer software to include MS Office with ability to learn SimplexGrinnell specific software
  • High School Diploma, University (Degree) preferred
4

Inspection Manager Resume Examples & Samples

  • Associate degree preferably in a business or engineering discipline
  • Minimum of 5-7 of fire protection experience with minimum of 5 years in a supervisory role
  • Leadership, team building, administrative abilities, organizational skills
  • Knowledge of local and national fire code requirements
  • Able to obtain and retain any licenses that are required by National, State and Local codes
  • Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc
  • Ability to work flexible hours including weekends to meet customer requirements
5

Senior Manager, Fill Finish Inspection Resume Examples & Samples

  • Interacts with clients and manufacturing to assure successful technical transfer and integration of visual inspection, packaging and labeling processes into the manufacturing department
  • Manages and facilitates interactions and communications with internal and external client stakeholders regarding production
  • Interacts with potential clients, client auditors and regulatory bodies as subject matter expert
  • Oversees and schedules visual inspection, labeling and packaging operations and personnel within cGMP guidelines
  • Manages cGMP manufacturing activities including document production and review, internal and external driven continuous improvement projects, and assurance of cGMP compliance across all facilities
  • Analyzes data and results and provides conclusions and proposals
  • Troubleshoots manufacturing process problems. Leads the team to identify issues and propose adequate solutions
  • Provides technical support to manufacturing and investigations staff within areas of specialty
  • Employs high level technical expertise to develop new processes and creatively solve problems
  • Writes / executes inspection protocols. SOPs, Forms, and study reports
  • Responsible for automated cap coding and inspection systems
  • Responsible for group metrics, analyzes results and presents conclusions to senior manufacturing management
  • Researches and implements new methods and technologies to enhance operations. Suggests improvements to existing methods and procedures
6

Inspection Manager Resume Examples & Samples

  • This position is responsible for supervising SimplexGrinnell inspectors and for the execution of inspection schedules including on site deficiency quoting
  • Will interview applicants, recommend promotions and provide assistance in the evaluation and training of the inspection staff
  • Will schedule inspections or work with inspection schedulers
  • Manage department safety tasks such as toolbox talks, safety training and licensing
  • Communicate company policies to promote understanding and compliance on a daily basis
  • Actively participate in quickly resolving customer complaints
  • Understand applicable local and national codes and regulations
  • Participate in ride-alongs with inspectors to coach and mentor on job performance
  • Implement and manage the roll-out and participation of new programs\software, e-services, new policies, etc. Perform additional duties as required
7

Inspection Manager Resume Examples & Samples

  • This position is responsible for supervising inspectors and for the execution of inspection schedules including on site deficiency quoting
  • Will schedule inspections or work with inspection schedulers to maximize inspector productivity
  • Manage department safety tasks such as toolbox talks, safety training and licensing. Communicate company policies to promote understanding and compliance on a daily basis. Actively participate in quickly resolving customer complaints
  • Meet with customers to verify the services performed meet or exceed their expectation
  • Implement and manage the roll-out and participation of new programs\software, e-services, new policies, etc
  • Perform additional duties as required
8

Inspection Manager Resume Examples & Samples

  • Responsible for the total completion of all inspections and contract obligations, ie cleaning, or subcontractor work by coordinating with dispatch the scheduling of all inspection teams
  • Make sure deficiencies are properly followed up on as outlined in the Deficiency Program
  • Instruct and ensure inspectors are correctly completing Service Requests with proper coding through communicative devices, such as laptop computer and/or hardcopy Ensure that a customer signature is obtained upon completion of all assigned calls
  • Ensure that all manuals, vehicles, tools, equipment, etc. are maintained by all inspections teams in accordance with Company procedures and policies and in a professional manner
9

Inspection Manager Resume Examples & Samples

  • Will schedule inspections or work with inspection schedulers. Manage department safety tasks such as toolbox talks, safety training and licensing
  • Implement and manage the roll-out and participation of new programs software, e-services, new policies, etc
  • #external
10

Manager, Inspection Resume Examples & Samples

  • Provide supervision and leadership to salaried non-exempt personnel in Receiving Inspection, Assembly Inspection and Machine Shop Inspection areas
  • Interpret department instructions, company policies and procedures as applied to salaried employees, provide training, ensure housekeeping and health & safety requirements are met, and monitor equipment for current calibration
  • Apply and prioritize Inspection resources in such a fashion as to meet all cost, schedule and quality requirements
  • Work with other functional Managers and Directors as well as our local DCMA representatives
  • Analyze and approve MRBs
  • Process all rejected purchased material in accordance with the VMDA (Vendor Material Dispositioning Authority) procedures in SAP Group 2
  • Disposition of all rejected material and expedite all MRBs, L-orders and RTV dispositions
  • Process Quality Info Records and Inspection Plans for all purchased material in SAP Group
  • A BS degree in a Mechanical or Electrical fields and 4 years work experience in Inspection(additional 4 years of experience may be added in lieu of degree)
  • Maintain the highest level of commitment to quality, compliance and internal controls in adherence to company values and ethics
  • Must have the ability to promote the professional development of the Mission Assurance workforce and foster a collaborative culture that sustains the momentum around employee engagement, affordability, innovation, value growth and continuous improvement
  • 4 years or more of people/project leadership
  • Ability to work closely with our customers (internal and external)
  • An understanding of inspection measuring equipment and drawing specifications
  • Microsoft Office experience
  • Ability to perform Patrol and ISO 9000 audits as assigned
  • Must be able to obtain a TS/SCI clearance
  • Nondestructive Test (NDT) Level II Certified
  • Experience performing purchase order coding
  • Experience in MES Group
  • 10+ years of inspection experience
  • Proficient in Geometric & Dimensional Tolerance (GD&T)
  • Able to read electrical drawings
  • Experience of performing Source Inspections at supplier's facilities
  • Solder Inspection (IPC 610) experience
  • Material Authenticity experience
  • Active TS/SCI with CI poly clearance
  • Experience in SAP Group Training in the PQA modules
11

Inspection Manager Resume Examples & Samples

  • Bachelor's degree (Engineering preferred) with a minimum of 10 years experience in a manufacturing environment; at least 3 of these years in Quality-related role; and at least 3of these years in a Managerial role
  • A Master’s degree preferred
  • Certifications in blueprint interpretation and IPC standards preferred
  • Aerospace and defense industry experience preferred
  • AS9100 Quality Management and AS9102 First Article Inspection certifications preferred
  • Lean/Six Sigma certifications preferred
12

Inspection Manager Resume Examples & Samples

  • Oversee Sprinkler & Fire alarm Inspectors’ day-to-day tasks, recommend new hires & promotions; provide ongoing employee training & participate in performance evaluations
  • Maintain complete understanding of Company policies and review with inspectors to promote understanding and compliance on a daily basis
  • Consistently reinforce the SG message of “World Class Service Provider” and ensure delivery of customer service. Ensure that effective performance measures are assigned, and that employees are motivated to achieve and exceed objectives in a professional, timely and quality manner
  • Responsible for setting fair and manageable quota assignments and territories for subordinates
  • Demonstrate a positive, professional attitude to all internal and external customers; actively participate in quickly resolving customer issues
  • Work with Inspections Coordinators on scheduling and reviewing deficiency inspection reports
  • Ensure delivery matches contractual obligations; prepare past due projections; know the weekly/monthly revenue/margin goals and consistently maximize productivity of assigned field personnel
  • Meet with customers and inspectors monthly to ensure delivery of quality inspections and overall customer satisfaction
13

Inspection Manager Resume Examples & Samples

  • Assure all IR-relevant systems, processes and their outcomes comply with standards that meet applicable international and national regulations and guidelines, and fulfill client and Covance requirements
  • Provide direction and support for inspection readiness activities for CDS operational groups and study teams
  • Assist with the leadership and management of global Regulatory Agency inspections
  • Assist with development and delivery of IR processes and tolls for CDS
  • Global experience needed
  • Will work globally with all Operational Groups within Phase I-IV
  • Five to eight years of experience in the pharmaceutical/CRO industries or in a medical/clinical/laboratory or other scientific role
  • Ability to function as a member of a global team
14

Inspection Manager Resume Examples & Samples

  • Seniour Shop Inspection Coordinator manages the complete source inspection effort for one or more projects and is responsible for a smooth and efficient inspection operation
  • Review contract for specific inspection requirements
  • Establish the inspection philosophy, specific project inspection requirements and participate in the preparation of the Project Procurement Plan
  • Prepare the Project Source Inspection Plan and Project Inspection Planning Schedule and reports in accordance with company procedures, practices, standards and project specific requirements
  • Prepares, monitors and reports source inspection budget (man-hours) with the Project Procurement Manager and Client (if applicable)
  • Liaison with Project Procurement Manager and Client
  • Establish structure and resource the Project Inspection Organization in conjunction with Source Inspection Manager
  • Prepare project specific inspection guidelines for the Source Inspectors and other project inspection personnel
  • Manage source inspection activities: e.g. review of seller quality documents, surveys, inspection assignments, maintain planning, obtain and review inspection reports and monitor follow-up of actions resulting from source inspection visits
  • Ensure that source inspection systems are in place and maintained
  • Monitors and guides performance of project inspection personnel and provides regular feedback to the Source Inspection Manager
  • Attend project meetings and meetings with Sellers (e.g. kick-off meetings, pre-inspection meetings) where appropriate and provides regular feedback to Project Procurement Manager and/or Project Manager and Source Inspection Manager
  • Coordinate/prepare inspection close-out reports
  • Prepare source inspection waivers
  • Show flexibility and ensure proper hand-over with regards to
  • Typically has 6+ years’ experience including monitoring large or complex orders and guiding junior inspectors
  • Familiar with basic operations of personal computers
  • Above average business communications skills, both written and oral
  • Requires sound knowledge of the following: Specifications and contract documents, Manufacturing/fabrication processes, Mechanical drawings, Destructive and non-destructive examination methods, Welding techniques and practices, Manufacturing codes and standards, Quality Control methods and practices Quality Control methods and practices
  • HTO level, with 6 – 10 years of experience within petrochemical / chemical industry
  • VCA full safety Certificate (supervisor)
  • Speaks and writes English fluently
  • Administratively organized / accurate
  • Good communication and reporting skills with internal and external contacts
  • Ability to deal with resistance and stress
  • Ability to improvise and to work independently
  • Balancing costs and quality
  • Familiar with Pressure Equipment Directive (PED) and ATEX
  • Team builder and player
  • Being Pro – Active
  • High ethical standard
15

Inspection Manager, Auction Resume Examples & Samples

  • Performing work with efficiency and accuracy
  • Diagnosing the cause of malfunction and performs the needed repair
  • Communicating with Parts Vendor to obtain the needed parts
  • Determining labor rates for repairs per Labor Vendor resources
  • Ordering tools as required and in stock supplies for example oil
  • Examines the vehicle to determine if additional safety or service work is required
  • Provide estimates to repair vehicles and send for approval
  • Managing the list of vehicles that did not run on auction day to determine if repairs are needed
  • Attending factory sponsored training classes
  • Following federal, state and local regulations such as the disposal of hazardous wastes
16

Manager Filling & Inspection Resume Examples & Samples

  • Assures that operations are conducted in compliance with plant procedures and regulatory agencies (i.e. cGMPs, CBER, WHO, EP et.al)
  • Supervises activities including cGMP manufacturing campaigns, scheduling, logistics, document creation and review
  • Using expert knowledge in aseptic processing practices, supervises and coach staff to assure best practices are followed. Able to maintain aseptic gowning certification is a must
  • Reviews batch records for correctness and completeness
  • Participates in the planning and development of production schedules, coordinating personnel activities for commercial product and tech transfers
  • Define and ensure adherence to the monthly production schedule for the process area including the ability to drive enhancements / improvements necessary to improve capacity utilization
  • Consistently meets production, quality, compliance, financial and EH&S goals and objectives
  • Manage a team operating an equipment asset base of diverse technologies / technical expertise including lyophilization, high speed filling, and complex biological formulations
  • Exhibit a strong sense of overall business ownership by determining the operational impacts caused by production issues and defining mitigation plans both within own scope of responsibility and with other functional groups to minimize customer impacts
  • Exhibit a forward looking view to Define, Measure, Analyze, Improve, and Control process improvements within their applicable process area including direct management of initiatives or supporting indirectly
  • Ensures that all projects impacting the shop floor are executed properly, attaining desired outcomes on schedule and meeting quality standards
  • Additional responsibilities include determining and presenting technical process improvements and communicating issues to appropriate groups (e.g., IOC, AIOC, staff meetings). When necessary, coordinates Maintenance, Metrology, and Validation activities with applicable leaders. Takes a role in implementing new equipment and procedures
  • Must have previous experience working with a production department of (bio)pharmaceutical company, working knowledge of cGMP's, knowledge of continuous improvement techniques and problem solving skills, excellent verbal and written communication skills and working knowledge of SAP is preferred
  • Performs other duties as required by department management
  • Develops and leads a high performance team; owns the recruitment, training and development of staff
  • Professionally and appropriately interacts and communicates with internal clients to fully represent the technical, logistical, and risk management aspects of production
  • Responsibilities include employee selection, training, development, counseling recommendations for cost reductions, profit improvement opportunities, cost control, quality of product, incident investigations, managing departmental capital and operation’s budgets
  • Builds effective partnerships with department heads to help drive the business toward achieving company objectives
  • Managerial coverage for employees as required during second shift working hours. Schedule includes partial weekend coverage
  • A sound understanding of biological vaccine manufacturing or MAb’s including but not limited to; formulation, aseptic filling & lyophilization
  • Knowledgeable in lean manufacturing concepts and principles
  • A sound understanding of how own function integrates within the organization
  • Strong problem solving and decision making skills including the ability to analyze complex situations involving the competing objectives of cost and quality
  • Proficient in Microsoft Office (Excel, Word and PowerPoint)
  • Strong time management and prioritization skills
  • Knowledgeable in ERP system (SAP preferred)
  • Root Cause Investigation Principles
17

Manager, Test & Inspection Resume Examples & Samples

  • Prior leadership/supervisory experience
  • Experience with inspection equipment, CMM and attribute gauging
  • Inspections (in process, 1st article, receiving inspections)
  • Experience with calibrations for calipers, micrometers, height gauges, and other inspection equipment to verify conformance to prints
  • ISO-9001, AS-9100
  • Reading of blueprints, data, manuals, QADs or other materials o determine specifications, procedures or instruments required for inspection
18

Site Inspection Manager Resume Examples & Samples

  • Coordinates pre-planning inspections for Convention Services Managers, Executive Meeting Managers & Directors including coordinating dates with all parties; managing housing, amenities, transportation, and meeting room needs; communicating with internal departments; creating presentation materials and agendas
  • Act as VIP liaison for high profile groups to include coordination of all transportation needs, amenities, butler services, advancing of guest rooms, any special needs such restaurant reservations, nightclub needs etc. In addition, for some conventions would oversee a portion of the program dedicated to the group’s executives. This would include producing all event orders, and coordinating all meeting related logistics of this portion of the program
  • Provides creative input and direction in the development of planning guides, videos, and all other materials required for planning visits
  • Lead amenity committee & President’s amenity program. Participate in the research, development, evaluation and implementation of new amenity/gift ideas in anticipation of changing guest needs and our need to continue to wow our customers
  • Coordinate logistics with Sales Site Inspection Manager for all familiarization trips by working with internal departments, sister properties and companies, highlighting key benefits of the Mandalay Bay and Delano properties while maintaining a reasonable budget
  • Oversee management of all working documents for Convention Services ( S Drive) ensuring documents are up to date and in correct locations
  • At least 2 years of experience in the hotel industry at a 4-5 star property
  • At least 1 year of experience in hotel/convention sales
  • At least 1 year of experience working with large groups of 250+ rooms
  • Previous experience utilizing automated Sales/Catering system, Daylight
  • Must be proficient in PC software (Daylight, Windows, Excel, Word, PowerPoint, Photoshop, Daylight and Microsoft Exchange)
19

Manager, Inspection Resume Examples & Samples

  • Lead, coach, and manage the Inspection Supervisor and the quality control team
  • Ensure adequate levels of training and qualifications are provided to Inspectors to enable work to the highest standards
  • Establishes and ensures compliance with work rules and standards for inspectors throughout the system that enables compliance with MSG-3 aircraft maintenance programs
  • Manages the training and qualification of inspectors for specialized inspection techniques (Borescope, Non-Destructive Inspection, etc.)
  • Establishes, monitors, and adjusts Required Inspection Item (RII) for all fleets
  • Manage shift coverage and time accounting for effective inspector productivity
  • Responsible for providing and maintaining required tooling and equipment to perform inspection requirements
  • Resolves disputes concerning inspection decisions between quality control and other maintenance departments. Provide inspector override and technical conflict resolution
  • Provide technology assessment for work requirements
  • Ensures that the provisions of the Collective Bargaining Agreement is properly administered and enforced
  • Is an active contributor in the CASS program and readily enables and enforces continuous improvement
  • Perform additional duties as required by the Sr. Director - Quality Assurance
  • *DOT Regulation, 14 CFR Part 120 Subpart E 120.105-120.109 identifies this position as performing safety sensitive functions. Prior to any offer of employment or transfer into this position you will be required to submit to a DOT Pre-employment drug test for evidence of Marijuana, Cocaine, Opiates, Phencyclidine (PCP), and Amphetamines or a metabolite of those drugs
  • 5 to 10 year's experience preferred on FAR 121 aircraft
  • Four-year college degree desired, preferably in Engineering or Technology
  • Working knowledge of TRAX, Toolbox etc. is desired
20

Senior Manager, Pole Assessment & Inspection Resume Examples & Samples

  • Create and maintain a safety conscious work environment by leading and influencing others to follow Edison safety protocols and safe work practices
  • Provide strategic direction, leadership and management of the PLP/IPI Assessment staff as well as our 150 contractor partners executing our operating plans
  • Manage a prioritized, risk-based pole loading assessment of all poles across Edison’s system
  • Manage Assessment and Inspection activities, overseeing the launching, and monitoring of related projects and work streams to ensure the success of the Programs. (Work streams may include Pilot/Studies, Technology/Tools, Human Resources, Integrated Assessments, Integrated Design, Remediation, and Quality integration, Execution Plan, Regulatory Plan and Communications Plan)
  • Provide strategic direction and develop business plans as appropriate to achieve T&D goals
  • Assist with change management resulting from organizational changes and process modernization
  • Manage budget and human resources by creating staffing plans and controlling spending within budget limits
  • Facilitate employee development through coaching, identifying training and development opportunities and resource assignment
  • Ensure process, policies and procedures that demonstrate high quality results and regulatory compliance
  • Communicate with executive management on the status and results of PLP/IPI assessments
  • Five or more years managing/supervising an organization or business unit or team
  • Five or more years’ experience leading multi-discipline projects/programs, and/or providing strategic direction on the implementation of key corporate programs
  • 10+ years' combined experience leading high profile, multi-discipline, project/programs, providing team leadership, and strategic direction on the implementation of key corporate programs
  • Broad knowledge of Company and department policies, objectives, strategies, and goals; discipline or function being managed; applicable governmental laws and regulations. Excellent interpersonal and communication skills
  • Demonstrated strong analytical, problem solving and negotiation skills
  • Thorough knowledge of Distribution and/or Transmission Business Lines and SCE policies, practices, procedures, objectives, and strategies
21

Inspection Manager, Simplexgrinnell Resume Examples & Samples

  • Associate degree preferably in a business or engineering discipline or equivalent experience
  • Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs
  • Willing to travel out of town including overnight lodging
  • Able to pass a pre-employment background and drug test
  • Successful completion of the Inspector Entrée Course (Electrical or Sprinkler)
22

Inspection & Calibration Manager Resume Examples & Samples

  • Identify and deploy innovative quality inspection technologies to improve quality and generate competitive advantage
  • Manage all calibration activities at manufacturing plants to ensure compliance with EN DIN ISO 13485 and other applicable policies and standards
  • Lead a team of technicians and supervisors, including management of procedures and training of all employees affected
  • Manage budget, measurement equipment inventory, maintenance and service agreements
  • Manage investigations for process deviations and out of tolerance conditions
  • Define inspection and measurement strategies, technologies, tools and processes
  • Establish and maintain link with external service providers
  • Lead continuous improvement activities to ensure efficiency, effectiveness, compliance and competitiveness of the business
  • Champion standardization and value optimization initiatives
  • Know and follow all laws and policies that apply to one's job, and maintain the highest levels of professionalism, ethics and compliance
  • Lead and actively participate in relevant cross-functional teams
  • Bachelor’s degree in engineering or related field. Advanced degree or MBA is a plus
  • Minimum five years’ experience with inspection technology deployment, metrology, calibration in manufacturing environment
  • Minimum five years’ experience in regulated industry, preferably medical device, aerospace, and/or pharmaceutical
  • Proven track record in the delivery of cross functional projects in manufacturing environment
  • Experience in calibration system development and administration, including management of external services
  • Proven track record in people management
  • Fluent in English, preferably knowledge of French, German or Italian
23

Inspection Manager Resume Examples & Samples

  • Ensure documented procedures are current and reflect scope of activities for all inspections performed on site
  • Align with Operations Personnel on an inspection prioritization system to address inspection plan
  • Support inspection requests for part qualifications, failure analyses, source inspection, out-sourcing
  • Generate inspection reports
  • Determine and set part inspection plans as a function of NPI/new product releases
  • Create non-conforming material inputs and reports for all deviations from specifications
  • Create monthly data and perform analytics to assess inspection metrics/performance on a monthly basis
  • Assess site and staffing needs. Create proposals to meet site needs
  • Manages site inspection headcount model – aligns with Supervisor as required
  • Use internal inspection NCRs to drive internal quality continuous improvement process
  • 10 years mechanical and electronic inspection experience, 5 years management experience
  • Familiar with warehouse material flow, semiconductor and/or medical equipment assembly process
  • Be able to read mechanical drawings, knowledge of GD&T, be able to use CMM and other inspection tools
  • Familiar with medical industrial and FDA requirements, experienced in supplier and customer first article review
  • Quality knowledge such as 8D, supplier qualification, part qualification, non-conforming materials report, MRB, data analysis etc
  • Basic statistical knowledge of process control, AQL sampling plan, R&R study, correction study
  • Engineering or other technical degree, experience managing capacity and capability planning and resourcing in production environment
  • Good communication skill, be able to interface with customer and supplier for quality or documentation issue, and actively participate in failure analysis and corrective action efforts
  • Team player, flexible, willing to take different tasks and work assignments as needed
24

Inspection Manager Resume Examples & Samples

  • Develops and executes refinery’s business plan for pressure equipment inspection. Establishes objectives aligning with refinery’s targets for safety, regulatory compliance, reliability and efficiency. Works collaboratively with Operations and Maintenance departments to assure appropriate risk-based inspections and maintenance performed on pressure equipment. Implements process safety initiatives. Regularly reviews progress and performance metrics initiating, as needed, corrective actions. Responsible for personal safety of the inspection staff, and promoting the health and safety of others through effective implementation and support of safety programs. Ensure the development and implementation of an effective facility practice to ensure that inspection recommendations for repairs and other mitigations are followed up on and completed
  • Manages effective, efficient, and accurate implementation and maintenance of the facility RBI-based programs for fixed equipment. Must be knowledgeable and conversant on API 571 and on equipment damage mechanisms to support RBMI and facility mechanical integrity programs
  • Manages technical support for inspection activities encompassing disciplines such as, but not limited to, corrosion, mechanical, metallurgical and materials. Leads technical assessment of new inspection technologies. Ensure timely and effective inspection department support for shutdown and turnaround planning
  • Manages pressure equipment integrity initiatives to drive improvements and closure of corrective actions on non-conformance reports. Provides day-to-day technical direction to ensure work performed conforms to engineering standards and material selection is correct for intended service. Ensures appropriate level of technical review taken on inspection reports, corrective actions and repair plans. Oversees Management of Change (MOC) documentation relating to pressure equipment to ensure integrity considerations are properly addressed. Ensure the ready availability and accessibility of comprehensive inspection reference library. Sets standards to ensure effective auditing of procedures and practices for welding, NDE, PMI, and heat treatment for maintenance repairs
  • Develops budget for evergreen and special emphasis inspection programs exercising financial stewardship to control expenditures. Coordinates with stakeholders to develop and oversee the 5-year look ahead on high cost equipment replacement items to allow for adequate capital and expense budgeting
  • Works with Supply Chain Management and central Mechanical Integrity SME to secure supplementary contracted inspection services. Coordinates contractor assessments to ensure compliance with technical standards, safe work practices, service quality and performance efficiency. Responsible for contract administration and qualification of contractor inspection and NDE personnel
  • Manages staff providing supervision and technical direction. Establishes expectations and training for competencies and qualifications/certifications for staff inspectors, corrosion engineer, pressure equipment engineers and mechanical integrity engineers. Initiates selection, promotion and corrective actions when appropriate; accountable for fair and uniform application of personnel policies. Ensures development of technical ability and competence in applicable codes, standards and inspection methods/techniques in various disciplines and non-destructive testing (NDT) methods
  • Manages certification program including, but not limited Facility “R” manual, “VR” manual, ASME “U” & S certifications, National Board Owner-User Inspection Program, State Owner-User Inspection of State Permitted Equipment. Acts as refinery’s primary point of contact with state regulatory agencies. Ensure development and maintenance of effective inspection programs for permit to operate equipment and PSVs in accordance with company and jurisdictional requirements
  • Undergraduate engineering degree minimum of 15 years experience in refinery or chemical plant working with plant fixed equipment mechanical integrity programs required. Experience at multiple sites is a plus
  • Must have physical ability to perform essential job functions which includes ability to climb stairs, columns, etc. and enter tight and confined spaces including 18” vessel openings
  • Must be able to work extended hours as necessary
  • Knowledgeable with risk based inspection programs
  • Must possess strong leadership and collaboration skills
  • Competent in use of common office software programs (Excel, Word, PowerPoint)
  • Advanced knowledge and abilities using Capstone RBMI preferred
25

Asset Inspection Manager Resume Examples & Samples

  • Coordinate a team of assurance inspection professionals to conduct inspections and produce inspection reports
  • Coordinate the preparation of inspection plans and schedules on a risk based approach
  • Carry out field inspections independently or in conjunction with asset assurance auditors, where required, to assess ongoing conditions and performance of assets
  • Review inspection reports generated by asset assurance inspectors to ensure they meet quality and technical standards required