Electrical Systems Resume Samples
4.9
(88 votes) for
Electrical Systems Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the electrical systems job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
KB
K Becker
Kathleen
Becker
705 Laurianne Grove
Houston
TX
+1 (555) 723 9846
705 Laurianne Grove
Houston
TX
Phone
p
+1 (555) 723 9846
Experience
Experience
Boston, MA
Electrical Systems Architect
Boston, MA
Beatty, Ortiz and Kuhic
Boston, MA
Electrical Systems Architect
- Primary Responsibility is Electrical system architecture of both business and consumer DT and AIO’s. Includes OptiPlex, Alienware and XPS lines of business
- Explore alternative architecture concepts including new networking technologies, new and redundant power generation / storage methods and functional control methods
- Influence decisions and provide consultation to Marketing, development teams and ODMs to identify and resolve critical issues
- Innovate and develop new strategies and designs for electrical architecture at the vehicle and system level, especially in support of advanced driver assistance systems and automated driving systems
- Develop documentation and troubleshooting material for these systems
- Will be involved in all aspects of full system integration to provide a proof of feasibility for the whole system
- System Definition Dossier according development rules
Philadelphia, PA
Wind Turbine Controls & Electrical Systems Field Engineer
Philadelphia, PA
Lynch LLC
Philadelphia, PA
Wind Turbine Controls & Electrical Systems Field Engineer
- Perform on-site analysis and troubleshooting of Wind Turbine Generator Electrical and Control Systems
- Perform on-site analysis and troubleshooting of Wind Farm SCADA / Wind Farm Control Systems
- Maintenance Planning, Manpower and Personnel, Supply Support, Support Equipment, Technical Data, Training, Computer Resources, Facilities, Packaging / Handling / Storage / Transportation, and Design Interface
- Provide logistic analysis and support for assigned programs and components
- Develop and further expand technical knowledge and expertise of currently recognized industry standards for SCADA system maintenance
- Perform administrative functions, such as writing technical reports, ordering materials, securing quotations, preparing job status reports, reports to customers, time sheet and expense sheets on a complete, timely, and thorough basis
- Have knowledge to troubleshoot and provide routine maintenance checkout for a wide range of equipment vintage
present
New York, NY
Electrical Systems Bench Lead Engineer
New York, NY
Gislason, Ruecker and Boehm
present
New York, NY
Electrical Systems Bench Lead Engineer
present
- Execute test plans and development
- Improvement, product improvements, and to support build programs
- Lead and direct the build process for the bench working closely with assigned technicians
- Root cause all issues where systems are not working and determine if bench is properly constructed
- Regular contact with others outside the work group
- Develop new test techniques
- Plans and implements test and/or development programs
Education
Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
Rowan University
Bachelor’s Degree in Engineering
Skills
Skills
- Ability to deal with problems involving several concrete variables in standardized situations
- Knowledge of industry design and documentation standards
- Ability to coach and motivate team of engineers
- Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus
- Ability to lead a small team of engineers
- Proficient with Microsoft Office software and applications; Computer Aided Drafting/Design using AutoCAD
- Ability to carry out instructions furnished in written, oral, or diagram form
- Strong communication and problem-solving skills
- Strong time-management and organizational skills
- Ability to work independently and cross-functionally
15 Electrical Systems resume templates
Read our complete resume writing guides
1
Electrical Systems Security Engineer Resume Examples & Samples
- Supports/serves as the Company's "technical lobbyist/advocate" with regards to influencing and shaping future regulations and standards within standards development organizations
- Advocate the VW Group’s policies and technical requirements in trade associations and standards development organizations for the purpose of influencing federal regulations
- Plans, coordinates and supports related field test/research activities in the US and Canada
- Build/improve the relationship to government agencies, standards development organizations and consumer protection organization in the US and Canada in regards to related requirements and test methods
- Develops and coordinates activities between VWGoA, Research and Development departments within the VW Group, including subsidiaries, and US and Canada market standards development organizations (SAE, ISO, etc.), consumer advocacy groups (IIHS, HLDI, NFPA, etc.), and government agencies (USDOT, Transport Canada) and suppliers for active safety related topics
- Develops and coordinates answers for technical defense or proactive strategies and provides technical responses to government agencies or consumer protection organizations regarding functional safety and cyber security topics
- Assure that VW Group products attain any relevant vehicle security and cyber security NCAP, IIHS and others ratings and adhere to applicable Federal Motor Vehicle Safety System requirements and meet test specifications
- Communicate with development counterparts in Germany for product solutions to research challenges and investigate technical issues regarding functional safety and cyber security topics
- Communicate, coordinate, and interact directly with factories, parent companies, legal counsel, and federal and state agencies, regarding advanced safety systems. This includes developing, presenting, and implementing highly technical and critical strategies
- Work with suppliers, contractors and other OEMs
- Advocate the VW Group interest in Trade Association Working Groups (Alliance of Automobile Manufacturers) as the U.S. technical engineering expert in the areas of functional safety and cyber security topics for the purpose of influencing Federal regulations
- Provide detailed analysis through comments and presentations, to advance vehicle safety and security
- 3-5 years of experience and understanding of the following
- Full vehicle systems interrelationships
- Functionality of driver assistance systems
- US and Canadian active safety testing facilities and test procedures
- Analyzing potential safety benefits of driver assistance systems
- Vehicle Control Module/Network diagnostic and data logging expertise
- Proficiency in programming in Java, C/C++, disassemblers, and assembly language and programming knowledge of two or more scripting languages (PHP, Python, Perl, or shell) Computer Security Concepts
- In-vehicle System Design and Architecture
- Linux Operating Systems
- Compiled and Interpreted Development Languages
- Physical Security
- German speaking and writing skills
- Academic or work background in vehicle development
2
Supv Building & Electrical Systems Resume Examples & Samples
- Technical degree or equivalent experience in Facilities Management
- Excellent interpersonal and leadership skills
- GMP compliance knowledge
- Good technical writing skills and communication skills
- Able to multitask and strong computer skills; knowledge of Microsoft Office
- At least 1-3 years’ experience managing a team of 5 or more
3
Wind Electrical Systems Mechanical Design Engineer Resume Examples & Samples
- Responsible for the development, analysis and improvement of mechanical components used in GE Wind Turbines, mainly related to the electrical system and equipment
- Supporting the team members on all kinds of mechanical aspects related to their electrical components and assemblies
- Definition and control of complete technical documentation of components and subassemblies, including specifications, bills of material, drawings and 3D-models
- Work with global and cross-functional teams to leverage ‘Best Practice’ for design and validation procedures
- Preparation of design / analysis documentation, e.g. Design Practices, design record book articles, Work Desk Instructions (WDI), etc
- Work closely with the Technical Leaders and global team members to ensure high quality and on-time delivery for all engineering assignments
- B.A./M.A. in Mechanical or Structural Engineering, or equivalent
- Knowledge of structural analysis and FEA tools (e.g. ANSYS, STAAD, Rstab, Infograph, …)
- Proficient with design tools like e.g. NX, Pro/E etc
- Familiar with related international codes and standards
- Wind turbine system knowledge
- Strong analytical approach to problem solving
- Demonstrated ability to document, plan, and execute multiple New Product Introduction (NPI) program deliverables
4
Electrical Systems Specialist Resume Examples & Samples
- Strong analytical skills
- Experience leading, developing and mentoring a staff
- Exceptional oral and written communication skills
- Demonstrated platform skills
- Passion for excellence in customer service
- Ability to manage multiple initiatives and prioritize time and resources accordingly
- Ability to work independently and make sound business decisions with minimal supervision
- Formal education in either electrical systems with significant experience in building systems or formal education in either electrical systems with significant experience in building systems is required
- Working knowledge of building codes, regulations, and construction practices
- Comprehensive knowledge of Excel and other Microsoft Office products is mandatory
- Extensive knowledge of project financial monitoring/tracking/reporting
- Preparation of comprehensive project budgets
- Professional consultant contract administration
- Design or construction oversight responsibilities
- Coordination of project close-out activities
- Facility inspection assessment
- Leading, coordinating, reporting on construction projects
- Administration of quality control, maintenance of design & construction schedules
- P&L accountability and/or contract-managed service experience is highly desirable
5
Lead Specialist Electrical Systems Specification Resume Examples & Samples
- Engineering graduate
- 8-10 years product marketing & Sales experience (minimum)
- 10 years + experience in a business development position preferably with first hand knowledge of Western Region (India) customers, focusing on present and future target markets – Oil & Gas vertical (preferred)
- Strong Leadership skills
- Knowledge of MV and LV Assembly products and applications (including IEC designs). Knowledge of Codes and Standards Sound
- Good communication skills both written and oral
- Global outlook
6
Engineering Equipment Electrical Systems Technician Resume Examples & Samples
- Repairs; installs; replaces; and tests electrical circuits; cables; equipment; and appliances
- Uses hand tools and testing equipment
- Inspects and tests electrical equipment; lighting; signal; communication; and power circuits
- Isolates defects in wiring; switches; motors; and other electrical equipment using general and specialized testing equipment
- Replaces faulty switches; sockets; and other elements of electrical systems
- Dismantles electrical machinery and replaces defective electrical or mechanical parts such as gears; brushes; and armatures
- Mounts motors; transformers; and lighting fixtures into position and completes circuits according to diagram specifications
- Works from drawings; blueprints; schematics; and wiring diagrams
- 1-3 years of related electrical experience
7
Electrical Systems Integration Resume Examples & Samples
- Familiarity with analog and power electronics design
- Familiarity with Special Test Equipment (STE) design
- Experience operating and troubleshooting STE
- Skilled in using volt meters, oscilloscopes, spectrum analyzers, logic analyzers, programmable power supplies
- Ability to work in a fast-paced environment as a team player
- Experience working with high voltage products is a plus
- Familiarity with National Instruments and Keysight platforms
- Understanding of and experience in environmental testing such as vibration, shock, & Thermal Vacuum
8
Armament / Electrical Systems Technician Resume Examples & Samples
- Perform maintenance, authorized modifications and alignment on AH-64D weapons components, fire control units, sighting elements, communication systems, electronic and mechanical devices, and instruments
- Perform operational checks, ammunition loading/unloading and weapon subsystems configuration changes for all AH-64D fire control systems
- Test/troubleshoot and repair test sets and diagnostic equipment
- Perform and use operator maintenance on ground support equipment, common and special tools
- Provide technical guidance to United Arab Emirates (UAE) personnel performing AH-64D armament/electrical system maintenance, inspection and aircraft logbook and record keeping, in all procedures and functions identified in (a) above
- Evaluate performance of trainees in skill knowledge, compliance with directives, technical manuals, work standards, safety procedures and operational policies
- Conduct formal technical training for UAE trainee personnel in AH-64D armament/electrical system maintenance, inspection, supply and safety techniques using training aids, manuals, and instructional materials supplied by the UAE
- Evaluate progress of trainee at established intervals during the technical training program
- Perform maintenance trend analysis and applies production control, quality control and other maintenance management principles and procedures to aircraft armament system maintenance, inspection and shop operations
- Determine man hours, personnel, parts and facility requirements to maintain/repair AH-64D
- Maintain supply economy and discipline
- Recommend stock level for shop and bench stock for repair AH-64D armament, electrical instrument and fire control systems and subsystems
- Prepares evaluation, special reports and records pertaining to systems maintenance and related activities
- Prepare forms and records related to aircraft maintenance. Recommends and administers plans and policies
- Good communication skills, adaptable, diversify and capable to instruct and troubleshoot
- Certified 15Y Arm/Electrical Technician
- Minimum 5 years experience (can be waived by hiring manager)
- Qualified to perform any or all of the following procedures: Diagnoses and repairs malfunctions in AH -64D armament, electrical, instrument, and fire control systems and components including solid state and transistorized subsystems according to technical manuals (IETM), directives and safety procedures
9
Wind Electrical Systems Design Engineer Resume Examples & Samples
- Bachelors Degree in Electrical Engineering from an accredited college or university
- Minimum of years of experience of electrical components, applications and practices
- Masters Degree in Electrical Engineering from an accredited college or university
- Ability to work in a cross-functional and global environment
- Familiar with international codes and standards like IEC, UL, CSA, ISO, CE, CCC, DIN etc
- Proven strong interpersonal and leadership skills
10
Senior Test & Integration Engineer for Electrical Systems Resume Examples & Samples
- Experience developing and executing test scripts and performing tasks equivalent to Electrical Certified Test Conductor
- Bachelor Degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Computer Science or equivalent relevant degree and/or experience
- Strong planning, organizational, and interpersonal skills
11
Electrical Systems Software Engineer Resume Examples & Samples
- Bachelor’s degree in electrical or software engineering and/or computer science required
- 4+ years of design experience in automotive or commercial vehicle electrical systems or industry-related field preferred
- Experience in design and application of automotive electronic control modules, switches, driver input devices, software, or HMI elements
- Solid understanding of Six Sigma disciplines and tools preferred
- Experience with automotive or commercial vehicle networks, such as CAN, SAE J1939 and LIN preferred
- Proficiency using Requirements Management tools and Systems Engineering tools desired. Experience using Matlab/Simulink, IBM Rational Rhapsody, IBM Rational DOORS, IBM Rational Team Concert, Sparx Enterprise Architect, Creo/ProEngineer, Mentor Graphics, and/or HP Quality Center is a plus
- Experience in product development and new product implementation
- Familiarity with personal computer software including project management tools, word processing, spreadsheets, and databases
- Knowledgeable in the full process life-cycle software engineering development process for embedded systems
- Experience in software testing (unit level, regression and integration) preferred
- Experience in both graphical (i.e. Labview, Matlab, Simulink, Logicad) and textual (i.e. C, C++) software preferred
- Experience/Knowledge of ISO 26262, ISO 15504 and SPICE compliance preferred
- Display effective and professional communication skills (verbal and written) including interpersonal skills
- Interact effectively and in a professional manner with all contacts including external and internal customers and with suppliers
- Coordinate multiple concurrent tasks effectively
12
Wyse Electrical Systems Senior Engineer Resume Examples & Samples
- Works on abstract and complex problems requiring evaluation of intangible variables. Integrates trends, data and information into plans, deliverables and recommendations
- Develops innovative and creative output based on interpretation and analysis that improve business performance and contribute to cooperate goals and strategic intent. Including opportunity/risk analyses, cost/benefit analyses and pricing models
- Interfaces w/suppliers, mechanical engineering, system architects, ODM, quality, tooling engineering and other development groups to ensure the successful development and launch of new products
- Utilizes best-in-class tools to develop innovative solutions to highly complex problems
- Responsible for the electrical detailed design on assigned components
- Responsible for testing, analysis and debug on assigned electrical prototypes
- Ensures that comprehensive qualification and subsequent tool revisions are completed
- Ensures deliverables are met per program schedules
- In-depth disciplinary knowledge; leverages business acumen and subject matter expertise
- Provides deep subject matter expertise, advice and program delivery
- Contributes to the development of new techniques and plans within area of expertise
- In-depth understanding of Dell goals, customer requirements and knowledge of competitor practices
- Thorough understanding of Dell business priorities, strategy and direction
- Thorough understanding and management of customer business needs and expectations
- Manages projects and program execution
- 10+ years of hands-on experience in Electrical Engineering policies, processes and procedures
- Experienced with regulatory and compliance requirements
- Preferred knowledge of Cloud Client Computing Solutions
- Must have excellent time management skills
- Must have strong organization and analytical skills
- Ability to organize and manage multiple projects, setting priorities and working independently under aggressive timelines
- Fluent and articulate communication skills
- Must have a keen sense of learning and exploring new technologies independently
- BS in ME or related field, MS preferred
13
NPI Leader Wind Turbine Electrical Systems M Resume Examples & Samples
- Bachelor's Degree in Mechanical, Civil, Aero, or Materials Engineering from an accredited university or college or equivalent experience / knowledge
- Strong experience in Product Management in relevant field including strong experience in engineering / research in wind turbine drive train
- Master’s Degree / PhD in Mechanical, Civil, Aero, or Materials Engineering from an accredited university or college or equivalent experience or knowledge
- Strong understanding of wind turbine system interaction
- Strong problem analysis and resolution skills
- Ability to summarize and communicate complex technical information
- Ability to work and influence stakeholders at all levels across the organization
14
Wind Electrical Systems Generator Design Engineer Resume Examples & Samples
- Execute Engineering design work on wind turbine main generators and the connected power cables, as well as their testing, validation and assembly within the wind turbine system
- Definition and control of complete technical documentation, including specifications, bills of material, drawings, 3D-models, and schematics
- Ensure compliance of components and their use to international codes and standards
- Work with global and cross-functional teams to leverage ‘Best Practice’ for electrical testing and validation procedures
- 3+ years’ experience with generator design, applications and/or practices
- Familiar with power cable applications
- Proven wind engineering experience
- Demonstrated ability to document, plan, and execute multiple NPI program deliverables
- Flexibility in working with peers from different time zone
15
Electronics & Electrical Systems Integrator Resume Examples & Samples
- Responsible to deliver Electronics Subsystem for the Refrigeration platform team
- System integrator is responsible for entire Electronics and Electrical System delivery
- Ensure project executions delivers product leadership and global leverage
- Project delivery: on time, meet requirements, at cost, at quality
- Building Refrigerator Global architectures and roadmaps to support product execution
- Deliver Refrigeration System models and Knowledge capabilities
16
Electrical Systems Maintenance Technicia Resume Examples & Samples
- The successful applicant will have practical and progressive experience in his relevant trade and experience on fast jet aircraft
- Must have a thorough knowledge of QA & training principles
- Must have a thorough knowledge of the systems relevant to his AFSC and a basic understanding of Tornado Systems in general
- Should be able to demonstrate his capacity for rapid and accurate diagnosis
- Must be able to demonstrate his ability to overcome obstacles and achieve results
- Must be able to demonstrate his ability for effective communications at all levels within the company and RSAF
17
Integrator Avionics / Electrical Systems Resume Examples & Samples
- You possess a bachelor degree or equivalent in electrical engineering and a minimum of 3 years of relevant experience dealing with Avionics/Electrical systems, preference will be for previous experience with interior systems
- You should be familiar with the specification, design, integration, certification and acceptance of Aircraft Avionics/Electrical equipment
- You have a working experience using MS Office; CATIA skills will be an asset
- You must be having Good oral and writing skills in English; French will be a definite asset
- You must be able to plan and organize to ensure the achievement of results
- You must be a team player
- You have the ability to work with minimum supervision
- You must also be a person with initiative and good planning skills, strong sense of responsibility and good judgment
- You must also demonstrate initiative, a strong sense of responsibilities and good technical judgment
- You must be an energetic person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment
18
Electrical Systems Bench Lead Engineer Resume Examples & Samples
- Design from an electrical representation of the entire vehicle to be built at a bench level
- Create appropriate documentation for every circuit on the bench for a specific vehicle program
- Lead and direct the build process for the bench working closely with assigned technicians
- Perform functional checks of all primary feature functions
- Root cause all issues where systems are not working and determine if bench is properly constructed
- Lead and direct the harness verification frame process for assigned vehicle programs
- Root cause all harness issues identified and communicate to the appropriate personnel
- Execute test plans and development
- Report status of testing and validation activities
- Produce and maintain test related documentation
- Develop new test techniques
- Participation in global workshare and commonization meetings will be required
- Participates in solution of engineering related product problems (Root Cause)Provides technical direction to support personnel
- Works with engineering functions, suppliers, plant personnel and others to implement cost reduction, methods
- Improvement, product improvements, and to support build programs
- Plans and implements test and/or development programs
- Communicates information to and from internal and external customer organizations
- Coordinates and consults with departments outside engineering as needed
- Stays abreast of new technology and competitive products
- Regular contact with others outside the work group
- Travels as required
- At least 6 years of related work experience, or equivalent work experience required; Automotive supplier; Contract Engineer experience; SMT Experience; Test Engineer Experience; Advance Degree in Technical field (Preferred)
- Experience with Serial Data and Schematics
19
Group Lead, Electrical Systems Design Resume Examples & Samples
- Assist the Avionics Manager to direct and guide the Avionics Group to ensure successful completion and approval of engineering data packages in support of Greenpoint STC modification programs
- Assist the Avionics Manager in resource planning and hiring recommendations as required
- Conduct 1:1's, APR's (Mid-year reviews and Annual Performance Reviews) with the group of people assigned
- Provide mentoring and performance guidance to the Avionics team as assigned
- Support the Project Engineer by managing schedule and tasks
- Assist Project Engineer in change order reviews/planning
- Support the Project Engineer by overseeing the quality and consistency between similar drawings on all programs
- Provide status and reports as required to Project Engineers/groups and Avionics Manager
- Coordinate design concepts with internal and external partners
- Support project meetings
- Identify, document and report risk, challenges, lessons learned to the Project Engineer and Avionics Manager
- Ensure that Leads remain on task and focused on technical objectives and help out when needed
- Assist in reviewing the Statements of Work and the development of the Avionics Engineering bid to ensure completeness, accuracy and our ability to execute
- Maintains regular attendance including being at work, being on time to work and working full shifts
- Proven avionics systems knowledge, including IFE, Communications, LAN/WLAN and other systems required
- Proficient with Microsoft Office software and applications; Computer Aided Drafting/Design using AutoCAD
- Ability to lead a small team of engineers
- Ability to coach and motivate team of engineers
- Budget and project management experience required
- Experience leading employees/teams in productive and efficient manner
- Knowledge of industry design and documentation standards
- Experience with mechanical assemblies and manufacturing technique design
- Ability to work independently and cross-functionally
- Strong communication and problem-solving skills
- Strong time-management and organizational skills
- Ability to carry out instructions furnished in written, oral, or diagram form
- Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, and have close/color vision ability to adjust focus
- Ability to work outside of core business hours as required
20
Electrical Systems Launch Engineer Resume Examples & Samples
- Multi-disciplinary position responsible for the design, operation, installation, and test of low power electrical systems at Vandenberg Air Force Base
- Undergraduate degree in an engineering related discipline is required
- At least 1 year of experience with instrumentation power systems design (professional and/or academic lab experience)
- Understanding of basic low power systems and basic DC circuits and filters
- Experience with a data acquisition system and instrumentation of some type (school lab setting or professional experience)
- Experience with one or more of the following electrical test equipment: oscilloscopes, multimeters, power supplies
- Proficiency or direct hands-on experience in one or more of the following: electronics test rack design & build, data acquisition setup and field measurements, build of electronics systems or test systems for local assembly or industrial applications. (Examples fields are: robotics, automotive, aircraft, marine, autonomous vehicles, RF or communication systems, power plant or chemical process type industrial systems)
- Able to communicate clearly and interact with a wide range of people
- Able to perform in a high pressure environment
- Able to juggle a multitude of tasks simultaneously
- Enjoys field work and getting hands dirty
- Able to work under minimum supervision
21
Electrical Systems & Controls Engineer Resume Examples & Samples
- BS in Electrical Engineering with a concentration in Controls (Master's preferred)
- 5 - 7+ years’ experience in Electrical Design and classic control theory
- Experience in automotive powertrain control electronics and components required
22
Electrical Systems Superintendent Resume Examples & Samples
- Operate, maintain, inspect, repair, overhaul and logistically support electrical power production equipment and associated systems IAW AFIs 32-1062, 32-1063, UFC 3-550-01, applicable T.O.s, and manufacturer's manuals. Provide continuous regulated power to meet base and mission requirements. Maintain a single line-wiring diagram of the coordinated power production systems. Operate and maintain the base power plant and emergency pumps in an efficient and cost-effective manner. Operate and maintain stand-by power units and /or emergency generators for facilities in accordance with the facility priority list. Provide for temporary power to support lighting, essential utilities, and critical communication equipment. Train users designated as "Emergency Generator Operators" and provide written operating instructions. Maintain appropriate records and bench stock supplies and parts as required. Ensure power is restored, as soon as possible
- Operate, maintain, inspect, repair, overhaul and logistically support electrical distribution equipment and associated systems IAW AFIs, National Electric Code, local electric code, applicable NFPA standards, USAFE Supplements, US national safety codes AFJMANs, UFCs and local safety standards. Electrical systems include primary and secondary distribution lines, substations, transformers, bus structures, distribution panels, circuit breakers, fuses, grounds, grounding systems, lightning protection, motor control centers, transfer switches, switching devices, capacitor banks, fire alarm systems, cathodic protection systems, street/exterior lighting, interior lighting, and emergency and exit lighting. Calibrate, maintain, and test large appliances and deep fat fryers installed as RPIE or RPSE (Real Property Similar Equipment) IAW manufacturer’s manuals and NFPA standards. Inspect, test, install, and maintain fire detection systems IAW AFI 32-2001, UFC 3-601-02 and procedures manuals to include fire detection head cleaning. Maintain a single line-wiring diagram of the electrical system and conduct system studies and analyses as needed. Maintain traffic control devices including traffic signals, electrical wiring, automatic timers, and sensors, as required
- Knowledge of the principles and practices of electrical distribution
- Skilled in evaluating work performance of technicians and ensuring work place safety
- Extensive facilities and utilities maintenance experience
- Must be able to supervise and manage the activities of multi-national and culturally diverse work force
- Possess knowledge of safety and environmental issues as they relate to power production, electrical, and aircraft arresting systems
- Be familiar with various Computerized Maintenance Management Systems (CMMS)
- Prior military experience a plus but not mandatory
23
Transportation ITS / Electrical Systems EIT Resume Examples & Samples
- Assist with the development of ITS/Electrical Systems Plans, Specifications and Estimates
- Assist with traffic studies and barrier warrant analysis as required
- Work with teams of multi-disciplinary civil and electrical engineers to develop projects
- Assist with the development of communications system designs to meet the functional requirements of the project
- Assist with the development of ITS/Electrical Systems Architectures
- Supports business development activities
- Position is primarily based in an office environment. Some work related travel, outdoor field integration and oversight of ITS/Electrical System s deployments will be required
- Systems Engineering design tasks for transportation and connected vehicle projects
- Support for Fuels studies and QA/QC
- ITS, Electrical, fiber optic, and wireless communications design tasks
- Preparation of project reports and plans based on project analyses and assessments
- Coordination and attendance at project meetings with clients, public officials, engineers, planners and transportation system users
- Bachelors of Science in Electrical, Computer, or Systems Engineering from an ABET-accredited institution is required
- At least 2 years related experience in ITS/Electrical Systems is required
- Engineering in Training (E.I.T) or the ability to obtain the E.I.T. is required
- Experience with MicroStation Preferred
- Understanding of power distribution and low voltage systems is a plus
- Valid Driver’s license
24
Electrical Systems Design Engineer Resume Examples & Samples
- 3+ years of experience with electrical system development for off-highway mobile equipment
- Demonstrated technical capability and electrical troubleshooting skills
- Working knowledge of and exposure to embedded hardware and software with demonstrated skills and knowledge in one or more of the following areas: electronic hardware design, validation, & manufacturing; embedded software development, communication bus interfaces (e.g. J1939 CAN), electrification / hybrid vehicle development (e.g. generator, inverter, motor, and battery development)
- Must be a self-starter and able to work well without close direction, both in the office and in the field
- Strong interpersonal skills and the ability to break complex issues down into executable action items
- Ability and willingness to travel up to 25%
- Experience in the Ag, Turf, Recreational Vehicle, or Construction industry, Specialty/Emergency, or Military applications
- Skilled in using John Deere information systems, processes and a working knowledge of the Enterprise Product Development Process (EPDP)
- An advanced degree
- Project management experience (e.g. certification)
- Experience with electrification / hybrid vehicle development
- Knowledge of systems engineering processes
- Experience with DFSS processes including FMEA
- Experience in using Mentor Graphics Capital Harness Systems and/or ProE ProDiagram and/or ProE ProCabling or equivalent CAD systems (e.g. CATIA)
- Bachelor’s Degree in an Electrical Engineering
25
Electrical Systems Campaign Prevent Engineer Resume Examples & Samples
- 5+ years Electrical Systems and / or EDS design experience including launch
- Master’s degree in Electrical engineering
- Data acquisition and analysis skills; user of CAN and diagnostic tools, FCT experience
- Working knowledge of VSCS, Netcom messages and network management
- Green belt certified
- Knowledge of GPDS technical deliverables including Exports and Homologation
- Proficient in release/change control process (WERS), AVBOM, PDLs and MFAL concepts
- Strong knowledge of functional SDS requirements and Design Rules
26
Electrical Systems Architect Resume Examples & Samples
- Support electrical system architecture development on upcoming Ford Automated Driving vehicles. Develop solutions for highly innovative areas including vehicle motion control, sensing, computing and direct user experiences
- Innovate and develop new strategies and designs for electrical architecture at the vehicle and system level, especially in support of advanced driver assistance systems and automated driving systems
- Determine the functional allocations for advanced features and develop the high level network and physical interfaces needed to implement them
- Explore alternative architecture concepts including new networking technologies, new and redundant power generation / storage methods and functional control methods
- Develop documentation and troubleshooting material for these systems
- Bachelor’s degree in Electrical, Controls or Computer Engineering
- 1+ year of experience in automotive electrical systems development
- 3+ years of experience in automotive electrical systems development or a closely related area (P/T, Chassis, Networking, etc.)
- Experience with existing Automotive networking systems, especially CAN
- Familiarity with Model Based Systems Engineering is a plusStrong organizational and administrative skills
- Strong problem-solving and conflict management skills
- Successful candidate should be able to demonstrate leadership in One FORD (leadership) behaviors combined with outstanding interpersonal, teambuilding, and communication skills
27
Electrical Systems Lead-federal Division Resume Examples & Samples
- Assists in preparing quantity take-offs and estimates costs of materials, labor, and use of equipment required to fulfill all provisions of the contract
- Develops and maintains relationships with Government customers and subcontractors
- Develops detailed subcontractor RFP packages including Scope of Work narratives to solicit complete subcontractor bids. Manages the subcontractor solicitation process and reviews subcontractor bids for exclusions, cost-competitiveness and to ensure estimate covers all PWS requirements, Agency standards, and local codes
- Oversees planning of staffing and schedules project delivery
- Support the Operations team in identifying risks and quantifying impact and probability. Engages internal experts to identify risk mitigation strategies
- Supports post-award engineering design surveys, submittal preparation and design reviews
- Responsible for remaining current with relevant utility standards and practices
- Enforce, facilitate and follow JCI and contract specific safety requirements. Perform SSHO functions per company standard practices and per contract (COE) requirement if required per the position
- Provides regular progress updates on the meter program to Management for incorporation into master plan for analysis reporting
- Works with Site Superintendents/Project Managers to manage risks and assists in establishing project recovery plans. Ensures recover plans are carried out
- Experience with Utility Monitoring and Controls Systems (UMCS) contracts preferred
- Demonstrated subject matter expertise in Commercial building electrical systems
- Has a high degree of technical competence in multiple functional areas, capable of assessing design risk and being accountable for all elements of large projects
- Experience working on U.S. Military installations preferred
- Professional Master Electrical license preferred
- Must have good communications skills in dealing with customers and the workforce
- Demonstrated ability to lead teams, work effectively with others, drive for results, focus on the customer, & act ethically
- Excellent written and verbal communication skills and is comfortable presenting in customer-facing situations
- Proficiency with MS Word, MS Excel, MS PowerPoint, MS Project required
- Estimating experience using estimating software preferred
- U.S. Citizen with ability to acquire and maintain Department of Defense Security Clearances
- Ability to obtain OSHA 30 hour and First Aid/CPR/AED preferred with current certifications
- Ability to travel within the region approximately 30%
28
Wind Turbine Controls & Electrical Systems Field Engineer Resume Examples & Samples
- Bachelor’s Degree from an accredited college or university (or an Associate’s Degree in a Technical field with a minimum of 2 years of experience in field services OR a Military education with a minimum of 4 years of field service experience OR a High School Diploma / GED with a minimum of 4 years of experience in a field services role)
- Bachelor’s Degree in Electrical / Electronics / Computer Engineering from an accredited college or university
- Strong business acumen and ability to sell products and services to the customer
- Ability to work effectively with minimum supervision
- Strong customer service mindset
- Prior field engineering experience
- Prior project management experience
- FEP (Field Engineering Program) graduate (GE Employees Only)
- Experience and familiarity with various program languages and applications, such as Java Script, XML, Visual Basic, LabView, SQL, .net, and Matlab
- Experience and familiarity with various communication protocols and architectures such as OPC, DNP3, ModBus and EGD
- Experience and familiarity with both Bachmann and GE Controls Mark VIe controllers
29
Electrical Systems Test Engineer Resume Examples & Samples
- BS degree in Electrical Engineering with two or more years of industry experience related to testing and troubleshooting
- Experience using both benchtop instrumentation (e.g. spectrum analyzers and digital multimeters) and multi-channel data acquisition (DAQ) systems
- Ability to interpret basic circuit diagrams
- Willingness to work up to 30% night shift
- Willingness to travel up to five times per year for a total duration of up to 25% of the year
- US citizen with the ability to obtain a DOD Secret clearance
- MS degree
- Experience troubleshooting analog or high-voltage circuitry
- Programming and/or automation experience (e. g. MATLAB, C/C++, C#, and Visual Basic)
- PLC programming experience (e.g. Allen Bradley)
- Experience testing magnetic bearings or other rotating machinery
- Active DOD Secret or Top Secret clearance
30
Seeking College Students for Electrical Systems Engineering Services Contract Resume Examples & Samples
- Electrical Engineering
- RF and Microwave Engineering
- Electro-Optical Engineering
- Integration & Test Engineering
- Optical Engineering
- Packaging/Manufacturing
- Parts/Components Engineering
- Power Systems Engineering
- Radiation Affects & Analysis Engineering
- Detectors/Instrument Engineering
- Ground Systems Engineering
31
Electrical Systems Designer Resume Examples & Samples
- Create submittal, fabrication and proposal drawings
- Assemble bill of material
- Check and proof drawings
- Continually look for improvements to the standards to optimize design time
- Manage schedule for multiple projects and work appropriately to maintain schedules
- Develop new and creative strategies for maintaining the schedule through utilization of resources as well as software tool development
- Continued optimization with panel shop to ensure the handover process from design to build to shipment is as efficient as it can be
- Work closely with Electrical Engineers to ensure Cad Standards stay in-line with standard system designs
- Other essential duties assigned by Supervisor
- Associates degree in Electrical Technology plus 2 years’ experience
- 2 years of AutoCad Electric experience
- Understanding of MS Word and Excel
- Read and interpret electrical/controls diagrams
- Familiar with industrial controls circuits that include PLC’s (programmable logic controllers)
- Familiar with power circuits including vfd’s and motor starters
- Six Sigma Green belt training and certificate a plus
- AutoCad Electrical training
32
Electrical Systems Expert Resume Examples & Samples
- Power electronics
- Analog electronic
- Microcontroller programming
- Automatic discreet
- Mastery of electronic card design
- Mastery of simulation tools, routing, and laboratory testing
33
Electrical Systems Integrator Resume Examples & Samples
- Be responsible, as an Electrical Systems Engineer/Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Electrical systems on Challenger & Global aircrafts
- Be responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis
- Participate in the Electrical Systems design reviews to meet Aircraft Design Requirements and Objectives
- Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required
- Support the Final Assembly Line and In Service Aircraft for any development issues
- Manage, review and approve the deliverables of the System Suppliers
- Work with other functions & disciplines of the Business aircraft program to provide required information and also to collect required data to allow the design, development & certification effort to progress
- Support other departments such as Production, Customer Support, Program Office and Product Planning
- Participate in meetings and design reviews with the System Suppliers and certification authorities
- Be able to travel is a must
- You hold a University degree in Electrical Engineering or equivalent
- You have at least three (5) years of relevant experience with the design, development, integration and certification of Electrical systems
34
Electrical Systems Expert Resume Examples & Samples
- EE Architectural Design experience, including interfaces with ME, FW, Connectivity
- Familiarity with MCU integration and programming
- Vendor selection and technical relationship management for new technology components
- Must be able to create schematics, layout boards, build test beds
- Experience with batteries and analog design
- Some travel for build support
- Good communication skill with WW partners
- Create test strategies
- Understand regulatory requirements and integrate them into designs
- Able to plan and deliver within program schedules
- Experience in overall architecture of electronic hardware for products and solutions
- Excellent written and verbal communication skills; mastery in English and local language
35
Electrical Systems Designer Resume Examples & Samples
- 3+ years of electrical architecture knowledge and experience
- Possess a “systems design” mind set
- Ability to build a “straw-man” diagram that represents the end to end composition of the subsystem or feature functionality
- Ability to drive the proper questions to features and system requirements owners to support the best decisions regarding the type of interfaces to be implemented
- Possess a clear understanding about security and functional safety objectives
- Strong interpersonal skills to enable collaboration, drive discussions and consensus among features, systems and subsystems requirements owners
- Solid software modeling background to define the best partitioning to enable a feature to execute as specified
- Bachelor’s Degree in Software Engineering, Computer Science, Computer Engineering, or Electrical Engineering is required
- Proficiency with Microsoft Office applications (MS Word, MS Excel, MS PowerPoint)
- Proficiency with IBM Rational Change and IBM Rational Synergy (formerly Telelogic Change / CM Synergy) change and configuration management tools
- Proficiency using IBM DOORS and Rhapsody
- Experience with AUTOSAR applications
- Experience developing automotive electrical system components and/or systems
- Knowledge of major automotive electrical subsystems (Body, Chassis, Powertrain, Infotainment, Safety etc.)
- Ability to identify non-compliance to standards and resolve the issues
- Ability to verbalize problem statements as well as suggested enhancements
36
Electrical Systems Responsible Engineer Resume Examples & Samples
- Researches, develops, designs, and tests electrical components, equipment, systems, and networks
- Designs and develops system architectures, and defines key capabilities and performance requirements
- Defines design and technology maturity constraints of the system in accordance with customer specifications
- Bachelor of Science in Electrical, Mechanical or Aerospace Engineering with 5 years of design and/or analysis experience with Electrical Subsystems
- Active, In Scope DOD Secret clearance and the ability to obtain and maintain access to Special Programs
- MS in Electrical, Mechanical or Aerospace Engineering with 3 years of design experience with Electrical subsystems
- Active, In scope DoD Top Secret clearance
37
Electrical Systems Maintenance Tech Resume Examples & Samples
- Will be able to demonstrate experience in aircraft maintenance and engineering in a relevant role
- Must have and be able to demonstrate sound oral and written two-way communication skills with the ability to be tactful, discreet and confident in dealing with people at all levels
- Be able to work in close harmony in a mixed EE/SN workforce
- Must be able to work on own initiative to resolve complex technical issues
38
Electronics / Electrical Systems Architect Resume Examples & Samples
- Support the E/E team of our customer in customer location (United Kingdom) with multi-disciplinary design teams with members from Function Development, System Engineering, Network Design, Application Software, Mechanical Development
- Define and maintain the E/E system requirements, create and maintain the E/E System Design and Architecture and allocate requirements to hardware, software, networks, power-supply, sensors & actuators. Ensure System Architecture Designs are optimized for the whole vehicle, rather than individual systems or components
- Making balanced design trade-offs over different disciplines and steer technical decision-making. Facilitate meetings between stakeholders to iterate proposed Architectures to an agreed solution
- Excellent coordination and/or execution of the realization and/or validation of the previously mentioned tasks, together with the involved departments (e.g. Systems Engineering, control systems or software) and other service providers up to Start-of-Production (SOP)
- Professional documentation from requirements until validation phase
- Master's Degree in Mechatronics/Electronics/Electrical engineering or equivalent
- At least 8 years of experience in an Automotive System Engineering / Product development life-cycle
- Extensive knowledge and vast experience on different aspects of the architecture design process (function decomposition and allocation, communication, wiring) and corresponding design tools (DOORS, Rhapsody, Preevision)
- Extensive knowledge on in-vehicle network design and Automotive Embedded Software Development
- Strong knowledge/awareness of EMS production processes, law & directives, automotive processes (ISO/TS 16949), standards (AUTOSAR) Functional Safety (IEC61508, ISO26262), control systems, is required
- General knowledge in the field of mechanics, hydraulics, power electronics is preferred
- Experience in vehicle hybridization is an asset. Experience in motor development is an asset
- Self-motivated, enthusiastic, pro-active, demonstrates initiative, with ability to work with minimum supervision
- Perseverant and systematic worker with a goal-oriented and analytical mindset
- Strong communication and presentation skills and fluent English (spoken and written), ability to excel at teamwork and strong in reporting knowledge and results. Not afraid to challenge individuals, including suppliers, in a constructive manner
39
Instructor M Electrical Systems Technology Resume Examples & Samples
- Instructs and guides the class in an efficient and effective manner
- Maintains accurate records of student work and attendance
- Prepares thoroughly for each instructional hour
- Maintains a safe and orderly learning environment
- Grades and returns student work in a timely manner
- Counsels students regarding their grades and progress in the course
40
Electrical Systems Resume Examples & Samples
- Install, inspect, maintain, troubleshoot, repair and modify electrical distribution systems
- Climb utility poles and operate special purpose vehicles and equipment
- Inspect, maintain and repair airfield and runway lighting systems
- Maintain and install fire alarms, intrusion detection alarm and traffic system controls
41
Electrical Systems Technician Engineering Technician Resume Examples & Samples
- Performs installation of closed circuit television systems (CCTV) (cameras, Network Video Recorders (NVR), network equipment, etc.)
- Perform all tasks required for installation for IT infrastructure and cabling
- Proficient in the installation of racking systems, termination and dressing cable
- Recognize, troubleshoot and resolve system issues
- Coordinate with the project manager to update the project schedule
- Submit status reports as required
- Must be able to successfully complete an installation with minimal technical assistance
- High school diploma or equivalent plus 3 years of electronic security installation experience
- Experience with Genetec Video Management System and Axis cameras is preferred
- Secret clearance
- Travel: Up to 50%
42
Lead Electrical Systems Owner Resume Examples & Samples
- High school diploma or state equivalent general education diploma (GED)
- College degree in related engineering field or equivalent experience, preferred
- Minimum 2 years of advanced technical training in a related area
- Good interpersonal skills, ability to communicate well in both oral and written reports
- Lead by example
- Ability to manage competing priorities
- Ability to analyze and make decisions based on broad range of data. Effectively lead/facilitate team meetings
- Conflict resolution skills
- Must understand all equipment included in the electrical system, its theory of operation, and required maintenance. Have experience to match the complexity and hazards of the specific site electrical system
- Must be qualified in accordance with local laws and standards
- Knowledge of OSHA regulations, industry standards, and local codes
- Must be able to complete the electrical systems D&C and O&M program checklists
- Able to evaluate changes necessary to all electrical systems
- Qualified to assess hazards, implement countermeasures, and safely manage work on electrical equipment at the highest voltage level on the site, per client CBA 8016
- Must complete all the requirements to qualify as an ESO at the assigned sites within one year of start date
- Must become qualified as a back-up to the other Regional ESO, at those assigned sites within the second year of start date
43
Engineering Specialist Electrical Systems Resume Examples & Samples
- Integrate electrical systems on CRJ Family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.)
- Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.)
- Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures
- Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Bombardier Aerospace requirements and practices
- Communicate and coordinate with Transport Canada’s design approval designees (DADs)
- Prepare requirement documents including technical quotations, system schematics, requirement documents (TRD) and statement of work (SOW)
- Create electrical system schematics and review system definition drawings and harness reports (HDR)
- Analyze and approve new system concept proposals and integrate them in aircraft documentation
- Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports
- Prepare or update aircraft Electrical Load Analysis (ELA)
- Coordinate with system suppliers to achieve good integration
- You possess a university degree in Engineering or equivalent experience, in the electrical field. A specialization in aeronautical applications is desirable
- Technical experience on the CRJ or Challenger family of aircraft is an asset
- You must have strong English (written and spoken) communication skills
- You are able to manage conflicts and solve problems
- You have abilities in AutoCAD/AutoSketch
- You are self-starter, enthusiastic, well organized and customer oriented
44
Electrical Systems Harness Technical Author Resume Examples & Samples
- Development of Aftersales Publication Documentation and Processing of source/background data authoring using 2D graphical packages, processing and presentation of 3D illustrations and XML document generation using provided software
- Incorporate New Models, Model Year wiring/part changes into Aftersales Publication releases
- Provide input to the end user requirements as well as the needs of the customer business
- Understanding and delivery of key feature content changes to key milestones
- Liaison across departments
- Adoption of continuous process improvement – The initial processes require iterating and developing
- Supporting internal requests and also Technical Support Centre team with service information queries
- Knowledge of Electrical Harness Design and principles – Experienced Role
- Knowledge of technical publication requirements of Automotive OEM companies
- A Self-Starter with a can-do proactive attitude
- Knowledge of databases
- Knowledge of MS Word and Excel
- Good communication skills, written/verbal
- Organised & Used to working to deadlines
- Diligent
- Personable
45
Electrical Systems Technician Resume Examples & Samples
- Reads blue prints, produces red line and basic single line diagrams as well as rough shop drawings
- Researches part requests and coordinates with Procurement for the delivery of materials and parts
- Coordinates with Procurement for any quality issues on parts so that it can be rectified
- Arrange the proper return and replacement of the defective item under warranty, repair, wrongly ordered or delivered item/s
- Monitors repair parts usage to determine if current stock levels are adequate for maintaining repair schedule and submits monthly requirement for procurement action
- Maintains weekly status report of assigned assets or facilities
- Coordinates with customer for scheduling of PMCS services and unscheduled service repairs
- Prepares appropriate maintenance forms, logs and records for accountability to include trip reports
- Coordinate with supervisor in advance for interruptions in service, and customer notification, this may require coordination with military
- Provides equipment-operating assistance to users and technical assistance upon request
- Maintains accountability and serviceability of assigned assets and equipment to include calibration
- Strict adherence to performance work statement requirements and associated references
- Duties may vary dependent on mission
- Completes training in compliance with OSHA and United States Air Force (USAF) requirements
- Responsible for precise execution of company time reporting procedures and accurate completion of timesheet
- Performs other duties as assigned in accordance with contractual, functional, and mission requirements
