Senior Electrical Resume Samples

4.5 (67 votes) for Senior Electrical Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the senior electrical job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
BB
B Bartell
Brisa
Bartell
94547 Vivienne Road
Chicago
IL
+1 (555) 985 9456
94547 Vivienne Road
Chicago
IL
Phone
p +1 (555) 985 9456
Experience Experience
New York, NY
Senior Electrical
New York, NY
Eichmann, Wisozk and Rice
New York, NY
Senior Electrical
  • Establish engineering test plans/procedures against designs, and perform functional verification
  • Risk and quality management
  • Support business development related to enhanced Electrical or Automation services
  • Preparation of various station studies/calculations including electrical system load studies, short-circuit analysis, relay coordination, arc flash studies, motor starting system dynamics, harmonics analysis, ground fault analysis, and other calculations such as lighting level, heat trace, voltage drop, conduit fill, etc
  • Provide 'on-the-spot' advice and decisions - technical and cost estimates
  • Establishing and improving standards, practices, guidelines, and specifications for electrical discipline area
  • Lead / Assist in the production of Bid / Estimates
Los Angeles, CA
Engineer Senior Electrical
Los Angeles, CA
Muller LLC
Los Angeles, CA
Engineer Senior Electrical
  • Participate in process improvement and development of new technologies
  • Participate on committees to develop electrical equipment and installation standards
  • Provide input on electrical equipment standards and electrical data format standards
  • Negotiates complex states of work, schedules, budgets, and anticipates and resolves issues regarding customer relationships
  • Work with Master Electrical Power Line and Facility Technicians and Specialist on implementation of electrical projects
  • Provide input on Electrical equipment and alarm PM program
  • Provide technical expertise for project support including FAT, Commissioning and Start up
present
San Francisco, CA
Senior Electrical Commissioning Engineer
San Francisco, CA
Barton LLC
present
San Francisco, CA
Senior Electrical Commissioning Engineer
present
  • Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing
  • Assist and/or develop preventative maintenance plans
  • Provide comprehensive project management
  • Instrumental in developing advanced commissioning procedures in new areas
  • Actively involved in client interface and business development activities
  • Perform sales support functions
  • Develop and participate in Integrated Systems Tests (IST)
Education Education
Bachelor’s Degree in Electrical Engineering
Bachelor’s Degree in Electrical Engineering
The University of Texas at Austin
Bachelor’s Degree in Electrical Engineering
Skills Skills
  • Availability, Reliability and Maintainability
  • Strong attention to details
  • Ability to work in a team environment
  • Safety Instrumented Systems, Programmable Logic Controllers
  • Ability to work flexible hours, occasionally in excess of a normal 8 a.m. to 5 p.m. schedule
  • Risk and quality management
  • Ability to supervise and manage subordinate engineers and CADD personnel
  • Fault trees, FMEA, HAZOP knowledge
  • Experience of managing teams at project level
  • Project management skills
Create a Resume in Minutes

15 Senior Electrical resume templates

1

Senior Electrical / Mechanical Designer Resume Examples & Samples

  • Update existing drawing information regarding obsolete and replacement parts
  • Support engineering with completion of redlines and as-built incorporation
  • Provide support to engineering and maintenance in performing equipment service job plan creation with regard to necessary documentation
  • Proven Five (8) plus years experience in mechatronics design of complex industrial automation, conveyance or transportation based systems
  • Demonstrated good oral and written communication skills; self-motivated and able to work with minimum supervision
  • Demonstrated ability to provide technically sound form, fit and function and manufacturability checking
  • Experience with ASME Y14, AWS, UL 508A, ASTM
  • Programing capability in C++, .NET
  • Previous experience in manufacturing, maintenance and/or machine assembly & repair environments
2

Senior Electrical Architect for Desktops Resume Examples & Samples

  • Serve as technical Subject Matter Expert (SME) for mobile devices
  • Execute designs for complex systems backed by thorough engineering analysis
  • Take responsibility for gathering requirements and concepts generation
  • Engage ODM partners and technology providers to gather information and release requirements
3

Senior Electrical Engineering Specialist Resume Examples & Samples

  • Central contact person for suppliers and developers for all control module topics in the area of expertise (e.g. infotainment, comfort) for the vehicles assembled at Volkswagen Chattanooga
  • Evaluation of the supplier capabilities and other technical assistance in regards to control modules for departments at the Volkswagen Chattanooga assembly plant Responsible for establishing VW quality standards at the module suppliers
  • Responsible for model refinement and support of local product improvements
  • 5+ years of experience with automotive electronic control modules
  • Experience with automotive control modules Experience with automotive control module root cause analysis Knowledge of vehicle communication networks
4

Wind Senior Electrical Services Engineer Resume Examples & Samples

  • Bachelor's Degree in Electrical Engineering from an accredited college or university
  • Minimum of 8 years of experience in engineering
  • Wind engineering experience
  • Master's Degree in Electrical Engineering
  • Experience or desire to define technical requirements for third party engineering company design and / or delivery of product to the field
  • Experience or desire to reverse-engineer non-GE wind turbine designs
  • Experience or desire to work with LIDAR, WindControl, turbine controls, and / or converters
  • Strong leadership skills capable of involving and influencing all levels, internally and externally
  • Proven track record of delivering results
  • Recognized electrical expert in the wind industry through demonstrated technical accomplishments (examples include patents, component design and /or systems design)
  • Direct experience with design-to-cost and design-for- “producability”
5

Senior Electrical Components Engineer Resume Examples & Samples

  • 1) The generation of electrical component plans based upon customer design specifications
  • 2) Working closely with the program/project electrical design team to identify components by part number which are compliant to the over-arching component plan
  • 3) Manage and support component obsolescence activities such that all issues are identified timely and solutions generated
  • 4) Generate and submit PARS (Part Approval Requests) and NSPARS (Non Standard Part Approval Requests
  • 5) Provide all customer data item deliverables regarding electrical components
  • 6) Work to determine necessary DPA (Destructive Parts Analysis) requirements per customer specification
6

Senior Electrical Systems Planning Engineer Resume Examples & Samples

  • Bachelor’s degree from an accredited college or university in Electrical Engineering
  • Minimum five (5) years experience in a similar engineering capacity with knowledge of power engineering, distribution system design and construction, engineering economics and statistics, feasibility and power factor correction studies, load flow and motor starting studies, system reliability analysis, symmetrical components, voltage regulation, transformer sizing and analysis and over-current coordination principals and sectionalization devices to include relays, breakers, sectionalizers, reclosers, and fuses, transmission system protection and control, substation design and construction principles
  • Ability to operate personal computers and various software applications to include MS Office, Cad software, and other Company specific software
  • Ability to analyze data, perform complex engineering analysis, meet deadlines, and prepare comprehensive reports
  • Ability to communicate effective, both orally and in writing
  • Valid driver’s license and comply with the Company’s Driving Program policy
  • Must be able to work in extreme environmental conditions, both inside and outside (below 32 degrees for periods of more than one hour) and extreme hot heat (temperatures above 100 degrees for periods of more than one hour); and exposed to loud noises, vibration, hazards, atmospheric conditions and oils
7

Senior Electrical Field Engineer Resume Examples & Samples

  • Monitoring the electrical works for conformance with the provisions of the contract documents and the Procedures manual
  • Reviewing all the electrical shop drawings, method statements & ITPs and discussing with the team with relevant supporting documents to process for approval or disapproval
  • Checking the contractors' As-built electrical drawings for adequacy
  • Monitoring and controlling the day to day activities of the electrical inspectors i.e. site work inspection as well as inspection of the materials delivered in Contractors store
  • Ensuring that inspections are carried out in time and quality of installation and delivered materials is maintained as per the relevant specifications/ standards as well as relevant local Authority’s regulations/ requirements
8

Senior Electrical Building Services Engineer Resume Examples & Samples

  • Design of electrical building services including (LV) distribution, power and lighting, fire detection systems, communications, IT infrastructure and security systems
  • Demonstrating technical expertise, providing in depth knowledge and leadership whilst proactively coaching and developing more junior team members
  • Degree level qualification in electrical engineering or equivalent
  • Chartered Professional Engineer registration would be advantageous
  • Design experience with some gained within a consultancy
  • Use of AutoCad and ideally Revit software
  • Experience of managing projects participating in design meetings advantageous
  • Ability to be adaptable to various clients and projects
  • Ability to communicate effectively and professionally, at technical and commercial level with all levels of staff and clients (written and verbal)
  • Ability to be self-motivated and have enthusiasm for technical excellence
9

Engineer, Senior Electrical Design Resume Examples & Samples

  • Implement new technologies and methodologies in advanced power processing and controls
  • Develop high-level product architectures, power converter topologies, and analog/digital controls infrastructure
  • Provide technical expertise in the areas of power conversion, magnetics, analog/digital controls, modeling and simulation. Design power converters, interface circuits, and controls, at the system and circuit level, as used in high-performance programmable AC and DC power products
  • Participate with project teams throughout the development cycle in the design, documentation, and release of new products. Provide technical leadership to coordinate work of other engineers/designers in associated disciplines: mechanical packaging, thermal design, PWB design, digital hardware and firmware design
  • Oversee fabrication, troubleshooting, and verification testing of prototypes throughout the development cycle. Generate test plans, procedures, and summary reports for product validation testing, including compliance with regulatory agency standards
  • Participate in structured, cross-functional product development projects, working within constraints of program schedule, budget, and goals, and ensuring appropriate balance of product reliability, specification performance, and cost
  • BSEE, MSEE preferred, with a minimum of 4 years of experience relevant to the design of power conversion products
  • Proficiency in design of high-frequency, switched-mode power conversion; strong skills in soft-switching and resonant topologies are preferred
  • Proficiency in design of analog circuits having high accuracy and stability
  • Proficiency in analog and digital feedback control theory, with the ability to correlate product performance requirements with feedback control loop implementation
  • Proficiency in magnetic design: materials selection, core/winding optimization, thermal design, modeling, and practical manufacturing techniques
  • Competency in high-frequency design techniques for signal integrity, PWB layout, system interface, and EMI control
  • Competency in the use of computer software (MatLab, Simulink, Spice, , PADS, Altium, Excel) in the design process of power and control circuits for schematic capture, modeling and simulation, mathematical analysis, and data manipulation
  • Competency in design of electronic assemblies: components packaging, environmental constraints, and design for manufacturability, testability, and serviceability
  • Experience in digital hardware design as applied to power conversion, including ADC/DAC signal conversion, microcontrollers/DSPs, programmable logic devices, and high-speed digital communications
  • Knowledgeable of design requirements for compliance with domestic and international standards for safety and electromagnetic compatibility
  • Knowledgeable of real-time, embedded digital control systems is preferred: digital control techniques for power conversion based on MCUs/DSPs and FPGAs, firmware-implemented control algorithms, high-speed data acquisition, instrumentation buses and protocols for communications, control, and programming
  • Good interpersonal skills, written and oral communication skills, and the ability to work cooperatively in a team environment
10

Senior Electrical Engineering Specialist Resume Examples & Samples

  • Engineering Standards: Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and B&V policies. Assists in developing, maintaining and updating engineering standards. Provides techinical guidance to others regarding projects and disciplines
  • Quality/ Continuous Improvement: Independently applies knowledge and complies with B&V quality program relative to assigned tasks. May be responsible for ensuring compliance with B&V quality program. Provides related guidance and direction to others. Supports continuous improvement and change management efforts
  • Engineering Production: Prepares a variety of complex engineering deliverables for larger or multiple projects. Performs complex research and develops recommendations for equipment and/or materials selection. Oversees collection, assimilation, and management of data for engineering work. Prepares complex engineering calculations following standard methods and principles. Manages assigned budget, schedule, and quality requirements. Independently applies advanced engineering techniques and analysis problems and methods. Reviews lower level engineer work or assignments. Is responsible for one or more of the following: leading larger production teams; coordinating multiple discipline activity; responsible for technical aspects of projects as assigned
  • Project Coordination: Actively coordinates with all other internal/external team members on moderately complex projects
  • Client Focus: Responsible for assisting with identification of key client interests and drivers on moderately complex projects and may determine the key clients in some instances. Communicates client interests and drivers to project team members and develops approaches to accommodate these concerns in the performance of the work on moderately complex projects. May offer other services to the clients. Typically provides support to business development or pursuit activities
  • Knowledge Sharing, Innovation and Technology: Serves as a technical specialist and has knowledge and skill set to provide consultation and guidance to project teams in a particular practice area. Typically supports multiple projects on the complex technical challenges. Actively fosters knowledge management and provides mentoring. Develops and applies advanced engineering concepts and approaches to unique engineering problems
  • People Management- (supervision, career development, training, mentoring): Typically assists with performance management process, mentoring, recognition, and any corrective actions required. May participate in career planning, and learning and development
  • Resource Management- (budgets, tools, processes, project support): Implements resource management strategy. Manages engineering resources for small groups of a single discipline
  • Administrative: Administrative responsibilities may include office administration. Ensures policies, procedures, and processes are effectively implemented and communicated for workgroup. Ensures adherence to corporate and division programs. May approve timesheets and expense reports
11

Senior Electrical Resume Examples & Samples

  • Construction inspection and resolution of electrical and I&C construction issues
  • System integration and programming services
  • SCADA system upgrades and replacements
  • Smart Integrated Infrastructure, Data Analytics
  • Consulting and Water/Wastewater experience preferred
12

Senior Electrical / Acoustical Engineer Resume Examples & Samples

  • Electrical and acoustic design of products to improve quality and/or performance
  • Execute circuit changes driven by vendors (such as Part Change Notices / End of Life notices)
  • Perform root-cause analysis and corrective action of quality issues (such as field failures)
  • Consult with Development Engineers across disciplines to understand products and solve problems
  • Assist manufacturing plants with issues (such as test yield issues)
  • Participate in product cost reductions by looking for, and validating alternate parts and/or circuit topologies
  • Ensure product complies with worldwide regulatory agencies, working with internal validation laboratories
  • Work with PCB designers on circuit changes and critical layout issues
  • Perform / interpret acoustic measurements on a wide variety of systems, from transducers to full audio systems
  • Perform statistical analysis and interpretation of production acoustic and electrical data sets
  • Troubleshoot to the component level (both electrical and acoustic issues)
  • Circuit design
  • Use of lab equipment, such as oscilloscopes, spectrum analyzers, VNA’s etc
  • Familiar with acoustic measurement methodologies, equipment & related concepts
  • Good written and verbal communication skills. Able to work in cross-functional teams
  • Knowledge of acoustic transducers, including microphones, microspeakers and loudspeakers
  • Matlab and Audio Precision programming for acoustic test/analysis
  • Knowledge of mechanical engineering
  • Programming skills (such as C, Python, LabVIEW, Excel)
13

Engineer, Senior Electrical Resume Examples & Samples

  • Leads or participates on project teams to develop clear product specifications for MRI conditionally safe Active Implantable Medical Device System and evaluate feasibility of concepts
  • Understands MRI scanners and various electromagnetic fields generated by them
  • Understands how human tissue and Active Implantable Medical Device System respond to the various electromagnetic fields from MRI scanners
  • Understand the limits and thresholds (thermal, electromagnetic, force, etc.) of the various tissues involved in interactions between MRI and Active Implantable Medical Devices
  • Develops test strategy and test methods for Active Implantable Medical Device System for safety in MRI scanners or equivalent bench top setup
  • Develops and creates rationale for bench top to in vivo translations for MRI interactions including developing bench top test media to appropriately simulate in vivo conditions
  • Design or assist in specifying mechanical and electrical test fixtures as needed for evaluating prototypes
  • Defines and executes preclinical testing including protocol development
  • Bachelor’s in Biomedical Engineering, Electrical & Electronics Engineering
  • 3+ years of experience with BS
  • Experience with electronic test equipment
  • Human anatomy and physiology
  • Thermodynamics and biomechanics of tissues
  • Understanding of the fundamentals of Electromagnetics and human body interaction
  • Writing skills: Ability to document designs and reports in a clear and concise manner
  • Operating style: Hands-on, action-oriented, with good analytical and experimental work habits. Good interaction with other team members in the development of specifications and project plans. Effective in producing clearly written technical and non-technical product documentation
  • Ability to safely enter into and work in MRI scanner environments
  • Master's degree in Biomedical Engineering, Electrical & Electronics Engineering
  • 2+ years of experience with MS
  • Medical Device design experience preferred
  • Software experience: MATLAB, Minitab, SEMCAD or similar electromagnetics modeling program
14

Senior Electrical Engineering Resume Examples & Samples

  • 1) Develop new technical solutions for directed energy products and systems for the US Navy
  • 2) Provide subject matter expertise for technology assessments of DE weapons and concepts
  • 3) Provide modeling, simulation and analysis support to predict electromagnetic interactions with electronics and the environment
  • 4) Design, develop and provide engineering analysis associated with prototypes, scale models, mock-ups, and test models of DE systems or system elements
  • 5) Relate goals, technical solutions and program status to customers and staff in both written and oral communication
15

Senior Electrical Systems Estimator Resume Examples & Samples

  • Supporting the development of the scope of changes and contract requirements and defining the scope for estimating
  • Coordinating with all disciplines (engineering, contracts, etc.) and actively leading the efforts required for cost estimating of changes and other contract requirements
  • Developing estimates for professional services, labor, material and equipment costs for changes and other contracts related to the new rail, station, wayside facilities and road highway projects using templates according to project procedures
  • Following all federal guidelines and procedures including contract requirements and internal procedures in documenting the bases of estimates, vendor pricing and etc
  • Involvement in all aspects of cost estimating from the change inception to its execution (rough order of magnitude estimates (ROM’s), independent cost estimates (ICEs) and Cost Analyses (CAs))
  • Supporting negotiations and scoping meetings with contractors if needed including leading cost estimating discussions in resolving differences
  • Presenting/defending estimates for management reviews
  • 8-10 years of electrical/systems rail/transit estimating experience is required
  • Bachelor’s degree in Civil Engineering or related field is required
  • A general estimating background experience in all divisions is critical
  • An excellent track record in customer service and proven collaborative management skills is required
  • Candidate must be able to work in the US without sponsorship now or in the future
  • Local candidates only will be considered - no relocation allowance
16

Senior Electrical Building Services Engineer Resume Examples & Samples

  • Will be appropriate technical qualifications such as National diploma or Degree and understanding the UK IET regulations (BS7671)
  • Design of power distribution including cable sizing and protection studies
  • Design lighting, Fire Alarm, security and comms systems
  • Contribute to design projects across offices and internationally where required
  • Application of industry standard design and calculation software such as Amtech, Dialux etc
  • Project management of suitable projects
17

Senior Electrical Engineering Manager Downhole Engineering Resume Examples & Samples

  • Perform work in accordance with Nabors HS&E policies and procedures
  • Manage team of engineers ensuring design quality and proper documentation of design
  • Define and enforce design process steps, including reviews and release processes
  • Mentor engineers on proper design methodologies
  • Provide insight &/or design system architecture
  • Liaise with Project Managers on system functional requirements
  • Interface with other departments on manufacturing and testing objectives of prototype equipment
  • Set team and individual priorities as needed in alignment with project managers
  • Manage Inventory of Software products, Lab Equipment, Specialized tooling
  • Provide detailed progress reports and system functionality documents for upper management
  • Identify and hire qualified candidates for team
  • Provide hands on design work as job allows/requires including
  • Develop firmware
  • Schematic design of circuits and assemblies
  • PCB Design
  • PC Software Design (Labview)
  • Electronic Parts Selection
  • Bachelor’s Degree in Electrical or Computer Engineering from recognized University
  • Minimum 10 years experience designing Electronics for Harsh Environments (>150C, >20g shock and vibration)
  • Minimum 5 years experience designing products for Measurement While Drilling (MWD) and Logging While Drilling (LWD)
  • Minimum 4 years using Protel/Altium Designer CAD Software
  • Minimum 4 years managing engineers
  • Experience managing a design project
  • Experience developing EM MWD equipment
  • Experience developing Mudpulse MWD equipment
  • Experience developing Resistivity equipment
  • Experience developing >175C DH Tools
  • Experience on working on manufacturing floor of DH tools
18

Senior Electrical Validation Engineer Resume Examples & Samples

  • Electrical validation of high speed interfaces
  • Resolving design and implementation issues
  • Defining and writing tests based on product specifications and capabilities
  • Test execution
  • Test Writing
  • Bug writing and regression
  • Test execution status
  • Maintenance of test and lab equipment
  • Experience in specifications and methods of analysis for industry standard serial buses and memory interfaces
  • Hands on experience in embedded system/silicon validation
  • Hands on experience in validation and debug of high speed interfaces for: DDR, PCIe, SATA, USB, HDMI
  • At least ten plus years of experience in validation and debug of peripheral interfaces such as for I2C, I2S, SPI, and GPIO
  • Strong knowledge of Computer Architectures, Chipset protocols (such as PCIe, SATA, USB, etc.), and networking protocols
  • Strong track record of analytical, integration, support, and debugging skills
  • Skilled use of test equipment for digital, analog and high frequency component level characterization
  • Board and component level measurement techniques
  • Design and layout of high frequency printed circuit boards
  • Signal and power integrity analysis and verification
  • Preferred Educational Qualifications: Bachelor or Master of Science degree in Electrical Engineering or Computer Engineering
  • Linux & Android embedded hardware validation or silicon validation
  • Experience in Post Silicon Validation of SoCs
  • Development experience with any of the following: Digital High Speed board design, PCB layout, signal integrity analysis, placement and routing constraints
  • Memory module validation: DDR3, eMMC, and/or various Flash interfaces
  • Electrical validation of; Wi-Fi 802.11ac, BT-BLE, SATA, MoCA 2.0, analog audio & video and/or HDMI 2.0
  • Power circuit debug experience and a good working knowledge of power delivery and power characterization
  • Experience with basic tools of the trade (DMM, High Speed O-scope, debuggers and firmware programmers)
  • Familiarity with volume manufacturing methods and processes
19

Senior Electrical & Plant Design Engineer Resume Examples & Samples

  • Development of electrical engineering solutions that comply with customer requirements, railway group/company standards and British/European standards
  • Providing engineering input to tender proposals and feasibility reports
  • Carrying out production checks on a wide variety of electrical engineering design
  • BEng honours degree or equivalent in electrical engineering
  • Must be a confident and persuasive communicator across all functions internally and at all levels within the customer base and be a good team worker and decision maker
20

Senior Electrical & Instrumentation Engineer Resume Examples & Samples

  • Provide input focused around the maintainability and reliability aspects of the plant design efforts
  • Assist in identifying, evaluating, and addressing possible safety, quality, and/or environmental concerns
  • Assist in the development and review of documentation including Interlock Lists, Electrical Specifications, Instrument Specifications and other drawings
  • Act as an interface between Engineering design and construction teams and plant personnel
  • Assist in the development of E&I maintenance activities and strategies including preventative maintenance, troubleshooting plans, maintenance criticality and SAP set up
  • Assist in the development of process documentation
  • Support training design and implementation for E&I maintenance
  • Assist in the oversight of E&I construction activities
  • Develop documentation for interlock testing and check out procedures
  • Check out of the process control system
  • Assist in the checkout, water batching and startup of a new facility
  • Possibly manage one or more specific portions of work for the project
  • Assume engineer responsibilities following start up, to support regular manufacturing operations including maintaining equipment and instrumentation, providing leadership in maintenance work processes and determining opportunities for optimization
  • Previous work experience in a manufacturing facility
  • Previous refinery or solvents experience
  • Previous experience with
21

Senior Electrical Components Failure Analysis Engineer Resume Examples & Samples

  • Have a complete understanding and wide application of technical theories, concepts and analytical techniques in electronics failure analysis
  • Provide real-time customer support and obtain customer trust with frequent communication on analysis throughout the work cycle
  • Understand the customer’s scope of work, provide task estimates and prioritize assignments to meet customer’s critical milestones within required budget
  • Provide engineering support including technical briefings to internal leadership and external customers
  • Ensure accurate and detailed technical failure analysis reports through peer reviews with customer engagement
  • Ensure hardware safety and security through proper storage, handling and identification
  • Works under general direction and demonstrate the ability to independently pursue information
  • Represents the organization in providing solutions to difficult technical issues associated with specific projects
  • Participate and present to Failure Review Boards (FRBs) / Failure Integration Teams
  • Advisor to management and customers on advanced technical research studies and applications
  • Four (4) years of experience in failure analysis of electronic components, assemblies and/or missile hardware
  • Prior lab environment experience with extensive knowledge of assorted test equipment
  • Understanding on the physics of failures on full range of electronic components and determine performance risks associated with materials
  • Knowledge of device side effects on how they are used in circuit while determining parasitic & secondary effects
  • Fabrication skills to build top bench test-set to investigate/ re-create device failure mechanism
  • Use expertise to perform reversed engineering to find root cause through unique test bench setup
  • Excellent interpersonal skills with the ability to interact positivity with co-workers, suppliers, management and customer in a team environment
  • Excellent writing and verbal communication skills that represent the organization as the prime technical contact
  • Must be able to obtain and maintain a Department of Defense Secret clearance
  • Bachelor of Science Degree in Engineering such as Failure Analysis, Electrical, Systems, Material or Electro-Mechanical combination
  • Experience in the field failure analysis, with training in Failure Mode and Effect Analysis (FMEA)
  • Fabrication experience on full range of semiconductor devices, RF devices and magnetic devices
  • Experience using specialize laboratory equipment such as Spectrum Analyzer, Network Analyzer, PIND tester, Scanning Acoustic Microscope, Scanning Electron Microscope, Probe Station, Emission scope, Real-Time X-ray, etc…
  • Experience with Reactive Ion Etcher, chemical etching, plasma etching, de-capsulation, cross-sectioning and a variety of device opening techniques
  • Master of Science Degree in engineering discipline
22

Senior Electrical Electronic Engineer Resume Examples & Samples

  • Designing firmware for FPGAs in VHDL
  • Programming microcontrollers in C/C++
  • Use of Xilinx's Vivado toolset for FPGA design
  • Development and implementation of signal processing algorithms
  • Leading a team of entry level computer and electrical engineers
  • Knowledge of Xilinx development tools, including the Vivado design suite, IP Integrator, and HLS
  • Experience in radar, EW, software defined radio, and electro-optical system design preferred
  • Bachelor's Degree in Computer Engineering, Electrical Engineering, or related discipline and 3 to 5 years of experience; or Master's Degree in Computer Engineering, Electrical Engineering, or related discipline and 1 to 3 years of experience; or 6+ years of job related experience
  • Security Clearance Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information
23

Engineer Senior Electrical Resume Examples & Samples

  • Review electrical and distribution systems data on all Electrical projects
  • Provide list of electrical data sheets on all equipment installed for evergreen modeling
  • Provide input on electrical equipment standards and electrical data format standards
  • Work with Master Electrical Power Line and Facility Technicians and Specialist on implementation of electrical projects
  • Analyze possible business risk on all electrical projects
  • Provide input on Electrical equipment and alarm PM program
  • Participate on committees to develop electrical equipment and installation standards
  • Evaluate new technologies to improve electrical systems
  • Assist Electrical Facility Technician and Master Electrical Specialist in maintenance and commissioning of Soft starts, VFD and reclosures
  • Assist Electrical Power Line Technician and Master Electrical Power Line Specialist in maintenance and commissioning of Power Line equipment and reclosures
  • Support field and plants on Electrical issues 24/7
  • Provide technical expertise for project support including FAT, Commissioning and Start up
  • Participate in process improvement and development of new technologies
  • Provides guidance on setting, implementing and changing standards around electrical equipment and alarm program
  • Represent Oxy in witnessing teardowns and repair of major Electrical equipment
  • LI-MN1
  • Professional Engineer Certificate preferred
  • Experience in industrial plant maintenance
  • Candidates should have 3 to 15 years’ experience
  • In depth experience with managing electrical facility construction, operations and maintenance from transmission and distribution to motor control for high, medium, and low voltage systems
  • Valued contributor to business analysis and planning at all levels
  • Expert level competency in electrical systems including construction codes and practices
  • Extensive knowledge of material specifications and application
  • Understanding of regulatory guidelines
  • Proficient computer skills (MS Office Suite, Oxy proprietary software, Electrical vendor proprietary software, etc)
  • Strong organizational skills to juggle multiple tasks within the constraints of timelines
24

Senior Electrical Systems Architect Resume Examples & Samples

  • Architect and influence the shaping of future products by providing electrical engineering insight into the technology roadmap
  • Identify and scope projects around innovation opportunities as well as technology risks
  • Generate IP to protect innovation
  • Bachelor’s Degree in Electrical Engineering
  • 10+ years of work experience in design and analysis of electronics packaging
  • Must have extensive experience in designing complex electro-mechanical assemblies with an expert understanding of block diagrams, schematics, layouts, electrical analysis, power analysis, thermal dissipation, PCB stack-ups
  • Must have experience speaking and influencing at an executive level
  • Must possess strong communication skills (written and oral) with other company team members and the customer as required
  • Must have extensive experience with CAD systems (Gerber experience required)
  • Must possess working knowledge of mass-production manufacturing processes and material costs
  • Must have ability to work independently, regular reporting of progress and status. Only general guidance is needed on routine work; instructions on new assignments as needed
  • Experience with mechanical engineering and software engineering
25

Senior Electrical Display Engineer Resume Examples & Samples

  • Develop a full display system electrical architecture that meets or exceeds performance, cost and schedule requirements
  • Lead technical interactions with existing and potential suppliers to specify, select and, where needed, design electrical components for inclusion in the display module
  • Use and demonstrate best practices for quality-driven design (DFx, signal integrity analysis, document control, design review)
  • Serve as the key point of contact for the product design team to support electrical integration of the finished display into a complete product
  • Participate in cross-functional teams to investigate and troubleshoot prototype performance issues
  • Bachelor's degree in Electrical Engineering or related field
  • 7 years work experience in electrical engineering for consumer products
  • 2 years experience in design of display electronics
  • Experience in bringing a consumer electronics product, including a display, to mass production
  • Experience in RTL / digital ASIC design
  • Familiarity with high-speed differential interfaces: MIPI, DisplayPort, LVDS
26

Senior Electrical Proposals Engineer Resume Examples & Samples

  • Compilation of complete technical and commercial proposals for electrical and automation systems offerings for customers in the mining, pulp and paper, cement and metals industries
  • Taking responsibility for the accurate compilation of the full cost model for tenders
  • Coordinating activities with engineering, sales, legal department, supply chain, sub-contractors and clients in order to ensure that complete and competitive offers are compiled
  • Performing of preliminary design work, with the assistance of the engineering team, for electrical and automation tenders
  • Assuring compliance with the tender process and ensuring that the necessary procedures are followed
  • Providing support to the sales personnel responsible for the mining, pulp and paper, metals and cement industries and liaising with customers and suppliers
  • Performing of local and regional site visits to gather information required to prepare tenders
  • Being attentive to risks associated with the contractual and financial aspects associated with the compilation of tenders
27

Senior Electrical ICA Engineer Resume Examples & Samples

  • Technical report writing
  • Develop opportunities through close liaison with both internal and external Clients
  • Experience of project cost estimation and bids
28

Senior Electrical Resume Examples & Samples

  • Architecture definition and requirements decomposition to develop sub-system level requirements and design documents for product commercialization
  • Establish engineering test plans/procedures against designs, and perform functional verification
  • Participate and/or Lead sub-system design and integration activities, monitor against performance, cost, schedule and quality/reliability objectives
  • Liaise as required with multiple product development groups throughout the product-realization process through to product-launch (e.g. Firmware, Software, Systems Engineering, V&V, Manufacturing, Service, etc.)
  • Provide technical support for released product lines, Manufacturing and Customer Services if/as required
  • Must have a Bachelor's / Master's degree in Electrical/Electronic Engineering or Applied Science, or its equivalent.A minimum of 10 years related working experience from the graduation level
  • Experience in thermal management design at the module level is a requirement
  • Circuit design experience in low-level signal-conditioning and interfaces to digital electronics, is a requirement
  • Demonstrated experience in designing within a DFX environment (test/ manufacturability/ cost/ reliability/ service etc) is a requirement
  • Demonstrated experience with electrical/ electronic CAD schematic entry tools (eg Viewdraw, ORCAD), and simulation software (eg PSPICE, SIMPLIS, Hyperlynx) is a requirement
  • Experience in design for a mid-to-high volume manufacturing environment is a strong asset
  • Demonstrated experience in developing interfacing logic to enable above-mentioned functionality (eg via PLDs, FPGAs) is an asset
  • Demonstrated experience in leading a small functionally-based team to deliver design-to-requirements with respect to cost, schedule, quality and process adherence is an asset
  • Proactive, results-oriented, self-motivated team player with strong organizational skills and excellent written and verbal communication skills
29

Senior Electrical Engineering Sales Support Resume Examples & Samples

  • Evaluating proposal requirements and developing a plan to deliver
  • Running qualification/kick-off and status calls with the proposal project team
  • Collaborating with in-house SME’s to gather accurate and appropriate data
  • Communicating with a wide variety of internal stakeholders to drive deadlines and deliver on schedule
  • Working with both internal and external partner networks to develop bids as a unified team
  • Maintaining a high degree of professionalism throughout each project
  • Conducting research as needed to complete assignments
  • Managing production efforts - proof read and finalize documents (Using Siemens’s style guide)
  • Following proposal procedures to develop polished, professional RFPs, and an auditable trail of approvals and decisions made along the way
  • Managing opportunity financial workbook with input from stakeholders and LOA process
  • Gaining high level functional understanding of products offered to input into strategic approach to offering
  • Gathering and sharing market information providing feedback loop to Sales, Operations and Product teams
  • Excellent cross-functional team leadership
  • Knowledge of the US Smart Grid and Energy industry and products, including Grid Control software and hardware, Power Systems Consulting, and Equipment Protection and Automation Systems landscape
  • 10+ years leading complex proposals and engineering teams in development, sales support or project delivery
  • General knowledge of Digital Grid products and services including SCADA, EMS, ADMS, GMS, MDM, DER, MGMS, Substation Automation and consulting,
  • Excellent organizational skills with managing proposals and project deliverables
  • Excellent oral and written communication skills with customers and internal stakeholders
  • Expert facilitation, collaboration and influence skills
  • High degree of detail orientation, with a strategic and customer-champion mindset
  • Focus on production, and capability to manage through ambiguity to clarity, in order to achieve the desired goals and output from self and team members
  • Adept with Microsoft Office Applications
  • Project Management experience including project schedules and financials
  • Digital Grid implementation engineering including Solution Architecture
  • Smart Grid Vendor, utility, or IT industry experience
  • Knowledge of the global Smart Grid including Grid Control, Smart Metering, Consulting, and MDM landscape
30

Senior Electrical R&D Engineer Resume Examples & Samples

  • Bachelor's degree in Electrical Engineering, Mechanical Engineering scientific, or related technical field
  • 3+ years of Medical device experience
  • Thorough understanding of medical device industry and competitor products
  • 2+ years of experience in analog circuit design and electro-mechanical devices: Pressure sensor, Flow Sensor, transducer, solenoid, power supplies (PWM and linear), motor driver, motion control, digital video
  • Mixed-signal (ADC/DAC) experience desired (sampled-data systems)
  • Expert knowledge and experience in analog, mixed-signal, and power designs
  • Strong knowledge and experience in digital / logic design, system level design and integration practices
  • Analyze the design in terms of failure modes and effects analysis (FMEA), power budget, thermal budget, design margins, etc
  • Create system, subsystem and custom component specifications for in-house and OEM use
  • Create and maintain technical documents such as Hardware Requirement, Test Protocols, Test Reports, and Trace Matrix
  • Conduct / participate in design reviews
  • Experience in using ORCAD schematic capture
  • Must have released (and supported) products to manufacturing
  • Experience leading other engineers
  • In depth knowledge and wide application of technical principles, theories, and concepts in related field of expertise to develop innovative approaches to work
  • Effectively communicates and works cooperatively with others as part of a team. Shares information, status, needs, and issues with others in order to inform, gain input, and support decision-making
  • Proficient in Design FMECA and Design Verification and Validation activities
31

Senior Electrical R&D Technician, NDT R&D Resume Examples & Samples

  • Build and test electrical testing systems (test development, fixture fabrication, equipment qualification, test operation, maintenance)
  • Manage laboratory equipment calibration/location. This includes coordinating with metrology department to ensure the group’s equipment is compliant
  • Execute or facilitate printed circuit board assemblies (order components, populate PCBs, etc. or work with local vendor to execute quick turn builds)
  • Execute material, component and device testing to support product development objectives in accordance with engineering test plans
  • Prepare drawings and/or initiate ECO’s to complete documentation and build requirements for designs, tooling, fixturing, and/or processes
  • Demonstrate persistence, strong attention to detail, and the ability to troubleshoot and solve problems; these skills are required to make high-precision laboratory measurements with limited supervision
  • Take responsibility to complete assigned tasks within prescribed schedule with limited oversight while adhering to project plans including timeline and budget
  • Diligently follow protocols and painstakingly document work for inclusion in reports to support regulatory filings in accordance with Medtronic procedures
  • Identify, communicate and implement continuous improvement ideas by identifying critical deficiencies and unmet needs
  • Executing radio and safety tests or working with external vendors to execute these testing workstreams
  • Perform required training and certifications to demonstrate compliance with applicable divisional and corporate policies in accordance with individual training matrix
  • GED + graduate of a 2 year technical or engineering certificate program or an AS degree in an engineering or technical discipline
  • Experience reading electrical schematics (e.g. PCB layouts, PCBA assembly drawings, etc.)
  • Experience in electrical techniques (e.g. soldering, debugging/troubleshooting circuitry & test systems)
  • Experience with test instrumentation (i.e. oscilloscopes, power supplies, etc.)
  • Minimum 8 years experience as a technician in a professional environment with experience in both mechanical and electrical
  • PC skills (e.g. Microsoft Office Suite: MS Word, Excel, PowerPoint, etc.)
  • Bachelors of Science degree
  • GMP, QSR and ISO 9001 experience
  • Experience using and writing test programs (i.e. Labview, C, C++, python)
  • Proficiency data acquisition and test user interfaces preferred
  • Experience with medical or consumer device product development, testing and/or manufacturing
  • Proficiency with Altium, Cadence Allegro, Cadence SiP, Solidworks, some type of SPICE/PSPICE simulator (i.e. LTspice)
  • Experience with EMI/EMC testing
  • Able to bend/stoop/kneel, stand/sit/walk for 8 hours a day
  • Able to work with small parts, sometimes under a microscope
  • May be required to wear eye protection to accommodate laser use
32

Senior Electrical Architect for Rugged Resume Examples & Samples

  • Architect and influence the shaping of future products by providing system level insight into the technology roadmap
  • 10+ years of relevant experience or equivalent combination of education and work experience
  • Undergraduate degree and 8+ years relevant experience or Graduate degree and 6-8 years relevant experience
  • Advanced proficiency in reading and understanding specifications, data sheets and other technical documents
  • Advanced ability to write and analyze requirements, functional specifications, design specifications, tech plans and documentation
  • Advanced proficiency with electrical simulation tools; understanding of the different tools available for simulation
  • Advanced knowledge of analog and digital circuit theory and principles
  • Advanced understanding of appropriate technologies, vendor products and competitor's offerings
  • Advanced ability to identify potential product weakness, and be able to provide design guidance and recommendations for improvements to subsequent redesigns
33

Senior Electrical Building Services Engineer Resume Examples & Samples

  • Degree qualified in electrical engineering or equivalent
  • Electrical building services design and construction monitoring experience
  • Experience of successfully managing projects
  • A strong team player relating well to colleagues at all levels
  • A natural networker able to develop and build client relationships
  • Ability to communicate effectively and professionally, at technical and commercial level with all levels of staff, clients and design partners (written and verbal)
  • Experience with 11Kv would be useful
34

Senior Electrical Distribution Engineer Resume Examples & Samples

  • Issues recommendations for the annual capital budget in order to upgrade and add electrical infrastructure
  • Develops Short Range and Long Range Plans for the electrical system including substations, transmission and distribution construction and improvement projects
  • Evaluates and recommends system additions and improvements to the electrical system utilizing engineering analysis software tools, models and databases
  • Oversees design, contract negotiation, construction, coordination with VDOT and other government agencies, and monitoring of contractors to ensure short range work plan jobs for system improvements adhere to schedules and budgeted costs
  • Designs electrical layout for large commercial customers and new subdivisions
  • Determines system protection requirements and limitations by performing coordination studies, voltage drop studies, fault current studies and issues recommendations to improve and optimize electrical system performance including load transfer requests as required by system additions and maintenance of facilities
  • Develops technical standards, guidelines, construction and material specifications and engineering assembly guidelines for the organization
  • Coordinates and monitors the design, procurement of easements, permits by government agencies and construction of transmission lines with consultants, contractors, operations and other internal and external departments
  • Reviews construction work orders to ensure adherence to short range work plans, specifications, NOVEC policies, guidelines and procedures, and determines over-current and over-voltage protection requirements
  • Facilitates planning activities with consulting engineers, developers and government agencies to ensure that ultimate anticipated load growth development coincides with proposed system improvements
  • Reviews the accuracy of the system maps and data in Geographic Information System (GIS) and WindMil engineering model for use within the organization
  • Follows all Cooperative, OSHA and VOSHA Safety Rules and Cooperative human resources practices, policies, and procedures
  • Performs engineering development and design work including logic design, circuit design, instrumentation design, firmware development, model formulation, cost projection, computer architecture analysis and design, network structure design and systems engineering
  • Master’s degree in Electrical Engineering
  • Professional Engineering Certification
35

Senior Electrical Equipment / Systems DER Resume Examples & Samples

  • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects
  • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications
  • Manages performance of critical suppliers to ensure system integration and compliance with requirements
  • Provides critical support of fielded hardware and software over the entire product lifecycle
  • Leads research into technology advances for potential application to company business needs
  • Makes recommendations for technology investments
  • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard
  • FAA authorizations for Electrical Equipment / Systems through existing Designated Engineering Representative (DER) or Organization Designation Authorization (ODA) Unit Member
  • Authorizations should include one or more of the following
36

Senior Electrical Systems Technician Resume Examples & Samples

  • Performs all aspects of an ECLU overhaul including surveys, interlock checks, and routine maintenance. Complete overhauls of ECLUs on a timely basis
  • Maintains all records and files as necessary for ECLU equipment and Radiation safety
  • Troubleshoots all aspects of an ECLU system and initiates successful repair. Rebuild accelerators, ICT power supplies and RDI power supplies
  • Maintains and updates equipment overhaul and calibration procedures
  • Maintains plant electrical / electronic equipment
  • Calibrates instrumentation and drives
  • Assists in the development and upgrade of electrical drawings
  • Troubleshoots and repairs to the component level on instrumentation
  • Assists floor personnel in resolution of equipment problems
  • Handles assigned projects with little or no supervision as capable with experience level
  • Works with direct supervision to find equipment improvements
  • Finds information necessary to perform work when it is not available through normal channels
  • Troubleshoots familiar and unfamiliar plant equipment when called upon
  • Recognizes improvements in the shop processes and takes action to implement
  • Continually searches for ways to improve equipment reliability, performance, and safety
  • Maintains ISO calibration up to date with SAP PM system. Document calibration points and apply calibration stickers to production test equipments
  • Creates and complete work orders in SAP
  • Performs work in a safely and orderly manner to prevent injury
  • Directly RESPONSIBLE for the safe use of electrical/electronic equipment, man-made sources of ionizing radiation, radioactive material
  • Directly RESPONSIBLE for the proper training/certification of ECLU Operators
  • Performs work in a manner that is friendly to the environment
  • RESPONSIBLE for evacuating SF6 gas from failed power supplies and accelerators and recycling SF6 gas with the DILO recycling unit
  • RESPONSIBLE for disposing of used batteries, used oil, cable grease, rags, aluminum cans, scrap metal, scrap plastic per Sealed Air Environmental Policy
37

Senior Electrical Application Engineer Resume Examples & Samples

  • Support and participate in the EHS culture creation, comply with and execute related EHS regulations
  • Assist manager to improve communication and cooperation with relevant departments of communication and coordination with all departments in the factory and R & D, discover, analyse and solve the technical problems encountered in the production and work together with Electrical Components group to deal with critical technical problems of parts
  • Implementation of the company's safety and health management system; the hazard identification and environmental factors identification of functional block, evaluate and update, and is responsible for the effective implementation of the regulatory objectives and management programs
  • Track product quality status and lead continuous improvement of existing products
  • Take the temporary task from supervior
  • Requirements
  • Education: Bachelor Or Above, major in automation or electronics, electrical or related
  • Experience:Minimum 7 Years Relevant Working Experience
  • Good PLC and touch screen programming skill
  • Good communication programing skill (Modbus, BACnet, etc.)
  • Good electrical hardware design skill
  • Be familiar with related technology and technical standard (UL, EN, GB, etc.)
  • Understand the working principle of air conditioning system
38

Senior Electrical Plant Design Engineer Resume Examples & Samples

  • Sound knowledge of AIS and GIS equipment and layouts of substation up to 400kV
  • Extensive experience in engineering delivery in a regulated and high safety critical sector
  • Applicable Engineering Tools for role – In line with CAS role requirement for each task
  • Membership to an engineering institution
39

Senior Electrical Plant Engineer Resume Examples & Samples

  • Ability to design site layout and prepare drawings for
  • Good Interpersonal Skills
  • Experience in the Transmission and Distribution sector
40

Senior Electrical Engineering Systems Engineer Resume Examples & Samples

  • Bachelor’s degree or higher from an accredited university
  • Minimum of five (5) years combined product development and/or technology commercialization experience
  • Minimum of seven (7) years’ experience in multidisciplinary system design
  • Bachelor’s degree or higher in Electrical Engineering, Electronic Engineering or Computer Engineering from an accredited university
  • Experience in developing intellectual property
  • Experience with one or more of the following
41

Senior Electrical & Electronics Engineer Resume Examples & Samples

  • May support the marketing department in the analysis of customer need (VOC) and in the development of product specifications.- Develops an electronics timeline for their own developments and is accountable for it
  • Develops products or technology that meets the overall specifications, either individually or as a member of the team
  • Provides accurate and effective design and/or technology input to the team
  • Insures that proper documentation is completed, on a timely basis
  • Provides cost effective designs
  • Participates in other aspects of the product development such as: solving manufacturing issues, product performance, repair issues, product improvements, and value engineering
  • Apply advanced electronics engineering principles and theories to complex issues. Interfaces effectively with other departments in the solution of problems or issues
  • Applies effective team skills in attaining the goals of the team and the products
  • Maintains confidentiality as required by the project and the department
  • May mentor and coach lower level electrical engineers on a project basis
  • Assist with system architecture definition and critical component selection
  • A bachelor degree in Electrical Engineering or related field from an accredited 4 year university
  • Minimum of 3 years’ experience as an Electrical Engineer
  • Knowledge and Experience in Embedded mixed signal hardware design, especially in multi-layer PCB's using ARM Microprocessors, DDR2/DDR3 Memories, SLC NAND, Stepper and DC Motor Drivers, USB Hub controllers, Ethernet transceivers, DACs, ADCs, LVDS Controllers and FPGA/CPLDs
  • Expertise in Altium Designer PCB tool or an equivalent, Signal Integrity and Circuit simulation tools such as Hyper lynx and Pspice
  • Knowledge and experience in Embedded mixed signal hardware design, especially in multi-layer PCB's using ARM Microprocessors, DDR2/DDR3 Memories, SLC NAND, Stepper and DC Motor Drivers, USB Hub controllers, Ethernet transceivers, DACs, ADCs, LVDS Controllers and FPGA/CPLDs
  • 1 to 2 years’ experience in a NPD environment
42

Senior Electrical Architecture Engineer Resume Examples & Samples

  • The functional architect Engineer collaborates with Lead System Engineers , Subsystem Requirements Engineers (requirements authors), Subsystem Architecture Engineers, and ECU Design Release Engineers (DREs) to analyze feature requirements, evaluate function partitioning and allocation scenarios, and establish the primary design direction with regard to the decomposition of software elements in the system
  • Review functional requirements documented in Subsystem Technical Specifications (SSTS) and provide feedback to requirements authors improve clarity or consistency with established GM requirements strategies. Collaborate with requirements authors and other stakeholders as needed to ensure high quality, executable Subsystem requirements
  • Develop functional partitioning and allocation scenarios comprehending system constraints, cost /resource optimizations, robustness, and implementation complexities
  • Create and maintain the FPA UML Model for assigned subsystems using the Rhapsody tool according to the established release schedule
  • Document design direction in a UML model using the Rhapsody tool from IBM Rational
  • Integrates subsystem models to yield a complete system model which is released according to the established Architecture development plan
  • Review Node/Feature report output from UML Model extraction script to verify correct information prior to delivery to Network Engineering team
  • Collaborate with Architecture Analysis team to execute required analyses for high impact changes
  • Proficiency on IBM Rational Change and IBM Rational Synergy (formerly Telelogic Change / CM Synergy) change and configuration management tools
  • Proficiency on IBM DOORs , Big Lever GEARS and Rhapsody
  • Experience developing UML-based system and/or software models
  • Knowledge of embedded software engineering practices, structured analysis and design methodologies, and object oriented concepts
  • Ability to coordinate and complete tasks per a release schedule
  • Bachelors Degree in Software Engineering, Computer Science, Computer Engineering, or Electrical Engineering
43

Senior Electrical System Engineer Resume Examples & Samples

  • BS, MS degree in electrical and electronics field - or equivalent experience
  • 5+ years’ professional working experiences in electrical mechanical engineering for high current applications (e.g. Energy storage system, HV battery/Motor, Power electronic System, Electrical power Transmission, Switch/Contactor/Circuit Breaker/Cable/BusBar/Connector Component Design ...),
  • Rich knowledge on electrical mechanical system analysis, component design, manufacturing and production
  • Proficient with electrical and wire harness design tools (e.g. Auto CAD )
  • 3+ years’ experience working in electrical circuit design on embedded electronics. Knowledgeable of microprocessor hardware, modern analog, digital circuits
  • Proficient with electronics development and simulation tools (Mentor, Altium, Cadence concet, orCAD, Pspice, Matlab)
  • Good knowledge at automotive component development process and requirements
  • Strong lab bench skills
  • Experience with designing for EMI/EMC is desired
  • OE Automotive/Tier 1/2 experience with electrical component development is highly desired
  • Experience with EV/HEV battery electrical system design is desired
  • Solid communication and organizational skills
  • Fluent English at writing and speaking
44

Senior Electrical Manufacturing Engineer Resume Examples & Samples

  • Determine manufacturing feasibility to
  • 4-7+ years’ experience working on the manufacture of complex mechanical systems is desirable
  • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable
  • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
45

Senior Electrical Digital Design Vhdl Resume Examples & Samples

  • Minimum of 6 years of Electrical Engineering experience
  • Electrical Engineering background in digital design
  • Familiar with Data Collection and Analysis tools – MATLAB, MathCAD
  • Able to lead design verification/testing of hardware inhouse and flight testing
  • Familiar with test equipment, such as signal sources, spectrum analyzers, noise figure meters, logic analyzers
  • Ability to work independently and manage priorities on multiple tasks
  • Ability to work in a team environment
  • U.S. Citizenship status is required as this position needs an active U.S. Security Clearance as of day one of employment
46

Senior Electrical Test Technician Resume Examples & Samples

  • Maintains and repairs various equipment such as transformers, circuit breakers and switchgears
  • Completes maintenance activities during limited plant shut-downs
  • Maintains daily, weekly and/or monthly reports and inspections as required
  • Works with and takes direction from the Regional Manager
  • Learns, understands, and complies with all Company and customer policies
  • Assists in training of other employees as directed
  • Assists and ensures that all work areas are returned to a clean, neat, orderly, and safe condition
  • Responds in a professional, polite, and helpful manner when dealing with other staff and customers
  • Job duties may be modified at any time
  • Technical school graduate and/or Bachelor Engineering degree
  • Certified as a NETA or NICET Test Technician, or equivalent Utility, manufacturer and AVO Training, required
  • Must have a minimum of seven (7) or more years of experience in the testing an evaluation of electrical power systems, required
47

Senior Electrical / Electronic Engineer Resume Examples & Samples

  • Bachelor degree (BSEE) or equivalent required
  • Minimum 7+ years of experience
  • Substantial knowledge of Electrical/Electronics concepts - Both Analog & Digital design skills, solid understanding of the properties of discreet semiconductors, RF theory and embedded devices, microcontrollers
  • Looking for candidates that have previous experience working in higher volume, low power consumer electronics products from concept to delivery, full product development lifecycle experience
  • R&D preferred
  • UL/LEED background a plus
48

Senior Electrical Manufacturing Engineer Resume Examples & Samples

  • 5-8 years of Circuit Card Manufacturing experience
  • Develop and maintaining work instructions and manufacturing specifications
  • Developing and refining the operations work content including facilitating teams to foster employee involvement
  • Review and approve drawings, tooling and fixture designs
  • Understanding of facility and assembly process development including capacity planning and project management
  • Ability to conceptualize, propose, quote and qualify assembly and test equipment
  • Possess a keen understanding of manufacturing lean principles with a proven track record of appropriate applications
  • Ability to lead problem solving teams and drive results through the implementation of standard work, process certification and other root-cause corrective action tools
  • Strong communication skills, both verbal and written
  • Prior experience in the aerospace industry preferred
  • ACE, 6 sigma and/or equivalent management system experience preferred
49

Senior Electrical Consulting Engineer Resume Examples & Samples

  • Proactively provide guidance and direction for electrical/controls engineering
  • Interpret, apply and provide direction to larger assigned tasks. May own the maintaining, updating, and developing engineering standards. Provide technical guidance to others
  • Independently apply knowledge and ensure compliance with B&V quality program. Establish related processes, and promote a culture that is conducive to quality. Provides guidance and direction to others. Supports continuous improvement and change management efforts
  • Develop recommendations for equipment and/or materials selection
  • Oversee collection, assimilation, and management of data for engineering work. Prepare complex engineering calculations following standard methods and principles
  • Manage assigned budget, schedule, and quality requirements
  • Develop and apply advanced engineering solutions to complex problems. Review lower level engineering work or assignments
  • Lead production teams, coordinate multiple discipline activity and serve as the responsible charge for projects. Establish work plan to be applied to a given project
  • Actively coordinate with all other internal/external team members on complex projects. Typically responsible for defining project schedules for single discipline or may have responsibility for multiple disciplines
  • Responsible for determining identification of key client interests and drivers on projects. Communicate client interests and drivers to project team members and develop approaches to accommodate these concerns in the performance of the work on moderately complex projects
  • Focus on client's current needs and situations. May offer other services to the client. Typically provide support to business development or pursuit activities
  • Serve as a technical specialist and have knowledge and skill set to provide consultation and guidance to project teams in a particular practice area
  • Participate in reviewing proposals for due diligence work and feasibility study
  • Oversee performance management, career planning, recognition, learning and development, and corrective actions for assigned staff
  • Implement resource management strategy. Manage engineering resources for small groups of a single discipline. Resolve resource conflicts and identifies training needs
  • Administrative responsibilities may include office administration as assigned. Ensure policies, procedures, and processes are effectively implemented and communicated for workgroup. Ensure adherence to corporate and division programs
  • Minimum bachelor's degree in electrical engineering from a recognized accredited university
  • Minimum 11 year experience of electrical engineering in power industry
  • Must have professional registration or licensure
  • Understand various scopes of work related to EPC and consulting engineering on power plant projects is preferable
  • Background in power plant project development, feasibility studies and technology selection is also preferable
  • Flexibility to travel as well as flexible for relocation
50

Senior Electrical HW Engineer Resume Examples & Samples

  • Hardware board­level design and integration
  • Digital Design (embedded system): DSP, SOC, uController, FPGA, CPLD, VHDL/Verilog
  • Digital Interfaces: Ethernet (2 Wire/Gigabit), CAN, SPI, I2C, PCIe, LVDS
  • Analog Design: PSpice, Low noise, discrete transistor design, power supplies (Linear/SMPS), high voltage/current
  • PCBA design: Signal Integrity, EMC, high­speed, mixed signal, high density
  • Design for manufacturing and regulatory compliance
  • Experience with ceramic and hybrid designs, a plus
  • Hands on experience building and troubleshooting hardware from prototype to production
51

Senior Electrical RF Test Engineer Resume Examples & Samples

  • 4+ years of relevant experience in testing and/or technical design of radar and communication systems
  • Proven experience troubleshooting and performing failure analysis of RF circuits with demonstrated knowledge of associated measurement equipment. Must understand radar theory and application
  • Strong communication skills including report writing and presentations
  • Strong Experience simulating RF circuits using ADS, Mentor Graphics or similar packages
  • Experience leading cross functional investigations
  • Experience developing test plans/methodologies
52

Senior Electrical Technologist Resume Examples & Samples

  • Must have a minimum of 5 years of experience in electrical maintenance
  • A thorough understanding of the electrical theories, methods, and tools associated with testing of electrical equipment, i.e. Megger, Doble, Hipot, etc
  • Knowledge of and ability to read electrical schematics in order to troubleshoot circuits
  • Ability to interpret test results and recommends the correct course of action
  • A thorough working knowledge of electrical safe work practices and procedures
  • Good working knowledge of Excel, Word, and SAP
53

Senior Electrical Engineering Systems Technician Resume Examples & Samples

  • 5+ years’ experience in a hardware design and support environment
  • Ability to do hands on electrical engineering work e.g. rework, soldering (0201 and larger), test methodology, design, product debug, and prototyping
  • Ability to read electrical schematics and circuit board layout files (Allegro .brd file experience preferred)
  • Proficient in Word, Excel, PowerPoint, and Outlook as well as comfortable learning a variety of other computer software
  • Strong organizational skills, including inventory tracking, keeping hardware components and tools organized and maintaining an inventory of components for engineering design and debug
  • Strong knowledge of test equipment including some or all of the following: DMM’s, DSO’s (digital storage oscilloscopes), programmable power supplies, data loggers, spectrum analyzers, network analyzers, and any equipment used in the development of electronic engineering product
  • Uncompromising team work ethic
  • Decisive action-oriented individual who learns quickly, works independently, and takes ownership of open issues
  • Ability to think on your feet and generate creative solutions to challenging problems
  • Ability to quickly switch tasks to accommodate changing priorities without losing focus on overall goal
54

Senior Electrical Resume Examples & Samples

  • Lead / Assist in the production of Bid / Estimates
  • Safety Instrumented Systems, Programmable Logic Controllers
  • Lightning protection
  • Availability, Reliability and Maintainability
55

Senior Electrical Field Technician Resume Examples & Samples

  • Monitoring electrical construction of fixed facilities to ensure contractor’s work meets the contract documents, design and construction schedule
  • Responding to site related construction issues through site query/ site instruction response
  • Coordinating elecrical construction with other design disciplines
  • Preparation and issuing of technical documents and sketches in the form of site instruction
  • Attending site coordination meetings
  • Prepare monthly site review reports
  • Performing inspection for the electrical system installation
  • Review of construction change orders and monthly progress billing
  • Conducting site acceptance tests
  • Review quality documents and Post Installation Check out forms
  • Review shop drawings against project specification
56

Senior Electrical Services Specialist Resume Examples & Samples

  • Responds to customer service calls (emergency, on-site, or on-line), checks indicated points of trouble, analyzes full requirements of system involved and checks and tests systems components
  • Diagnoses trouble or defect, determines corrective action, and repairs system
  • Develops MOP’s, tests and verifies system readings ensuring an optimal system operation
  • Identifies opportunities for system improvements, enhancements and upgrades to extend systems and improve building automation system performance
  • Prices, proposes, and proceeds with new work as per issued guidelines
  • Completes service repairs, replacements, upgrades, adjustments and calibration on electrical systems and components following manufactures recommended tasking, maintenance, troubleshooting and installation instructions
  • Supports the installation, start-up and commissioning of installed service projects through the execution of point-to-point system checkout, verification and startup procedures
  • Participates is final system turnover job walks from new construction to service to support the warranty phase for newly installed systems
  • Completes and submits timesheets and other necessary information weekly
  • If improper operation is due to another system or component, discusses problem with customer and/or office and advises of the best course of action
  • Works with other branch, company, or external service providers or vendors to arrange servicing and to resolve problem
  • Participates in job site final walk and / or final completion for systems to service turnover on assigned jobs
  • Conducts training and development classes for customers on site or at the branch
  • Delivers technical support, coaching and direction to end users and field labor when applicable
  • High school diploma or GED; Associate's Degree in Electronics or other related field preferred
  • Generally, 8+ years of successful experience in area of responsibility and successful demonstration of Key Responsibilities and Knowledge as presented above
  • Must have valid state driver's license in good standing, and must be at least 21 years of age in order to participate in the required Siemens vehicle plan
  • LI - KMB
57

Senior Electrical / Mechanical Engineer Resume Examples & Samples

  • Maintenance of the defined Supplier Quality Management System (procedures, guidelines and tools), to ensure the requested quality in line with the defined purchasing strategies in order to meet the cost and productivity targets
  • Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data
  • Initiation and introduction of the preferred supplier and components strategy (Supplier and technology release)
  • Design, initiation and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined
  • Support of the improvement activities in root cause analysis and definition and implementation of appropriate counter-measurements at the supplier's to ensure that the parts and services meet the defined quality requirements
  • Support in escalation management
  • Support of the data system to collect and evaluate supplier quality related key process indicators (KPIs) and issue of periodical quality performance reports in order to take care for appropriate improvement actions being initiated
  • Continuous tracking of the target setting and plan fulfillment (monitoring, analysis, control) in the context of Supplier Quality Management System
  • Support for the continuous improvement process of all supplier quality-related processes, guidelines and tools by means of internal audits, on-site assessments, bench-marking and best practice sharing programs
  • Support in identification and evaluation of technological trends in collaboration with Purchasing to maintain the competitiveness of our products
58

Engineer Senior Electrical Resume Examples & Samples

  • Applies mathematical, physical science, and advanced engineering technologies in accomplishing engineering objectives
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications
  • Estimates set-up times, flow-times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review
  • Participates in establishing operating procedures on new products and components
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability
  • Originates, refines, and releases complex manufacturing or inspection work directions
  • Provides technical consultation to management and others, and leads technical project teams
  • Responsible for strategic technical support that may involve longer range and/or complex business objectives in field of expertise
  • Evaluates and implements innovations and technological advances that improve quality, reduce flow time, improve productivity, and enhance operational surety
59

Senior Electrical Field Safety Specialist Resume Examples & Samples

  • Experience working in a union environment
  • Working knowledge ofindustry standards and regulations (e.g. OSHA [California and Federal], NFPA, DOT)
  • Proficient with conducting incident investigations and associated causal analyses
  • Proficient in hazard identification and associated mitigation actions
  • Proficient in hazard exposure and risk reduction processes
  • Working knowledge of PG&E standards and procedures
  • Knowledge of Human Performance Improvement concepts and principles
  • Certified Safety Professionals (CSP) or Certified UtilitySafety Professional (CUSP) or other industry-recognized certifications desired
  • Performs job hazard analyses and assists in development of Pre-Construction Risk Assessments
  • Provides Storm Response Electrical Safety Support
  • Ensures employee and public safety hazard exposure reduction
  • Assists Human Performance Specialists with safety related incident investigation and causal analysis. Provides insights and opinionregarding the incident cause, what alternative procedure should have been used
  • Interfaces with peers in PG&E Academy training, exchanging information regarding observed safety trends and possible needs for new training or modified procedures
  • Applies construction trade, regulatory, and Company standard knowledge to assist in the development of safety improvement procedures and processes. May prepare process map documentation
  • Partners with Safety Engineering and Health Services (SE&HS) toensure alignment with the over-arching Corporate Safety program and collaborate in resolution to systematic issues
  • Assists department data analyst with safety data tracking and trending
  • Develops and communicates plans to leverage identified strengths
60

Senior Electrical Building Services Engineer Resume Examples & Samples

  • Up to date knowledge of current building regulations current legislation and standards applicable in building\infrastructure design environments
  • Experience using Hevacomp, Dialux, Amtech Power, AutoCAD and IES
  • Mentoring and guidance of junior staff
  • Chartered status
61

Senior Electrical & Software Engineer Resume Examples & Samples

  • Fulfill design control requirements including the creation of detailed electrical/software specifications and requirements, detailed design files, design verification and validation test plans, risk management, DHF, protocols, and reports in accordance with company procedures, FDA and ISO guidelines
  • Coordinate and participate in the development of electrical/software architectures for medical devices
  • Coordinate, review and approve electrical/software documentation created by external partners, including product requirements, schematics, code, verification and validation test protocols and reports
  • Prepare and lead Design Reviews, Technical Reviews, and Peer Reviews
  • Provide support for field-based Sales Team and other Commercial partners
  • Partner with Downstream Marketing, Sales and key external stakeholders to identify unmet clinical/surgical needs; evaluate options; and provide sound engineering solutions
  • Attend industry tradeshows, professional education events, and other company-sponsored events to provide product training and support to customers as needed
  • Bachelor’s Degree in Engineering is required, with preference for Electrical and Computer Engineering
  • Advanced Degree (MS) in Electrical Engineering, Computer Engineering, or equivalent is preferred
  • Black Belt certification is desired
  • A minimum of 5 years of engineering experience is required
  • Majority of the experience encompasses of electrical design of low power devices and real-time software for embedded systems is required
  • Experience in medical device product development is preferred, with emphasis in hand held units, monitoring devices and/or neurosurgery field
  • Experience with Electrical safety testing is required (i.e., 60601-1)
  • Experience with Medical Software life cycle processes is required (i.e., 62304)
  • Real-time embedded software experience is a plus (e.g., Java, C, C++, Linux OS, QNX OS)
  • Experience with x86 or ARM microprocessors, PIC microcontroller, and CPLD firmware is a plus
  • Demonstrated detailed design analysis and statistical analysis for a robust and manufacturable device is required
  • This position is located in Raynham, MA and will require up to 15% travel.Engineering (Generalist)
62

Senior Electrical Resume Examples & Samples

  • LV supplies to existing / new distribution system within an existing facility
  • Final circuit electrical system rewire / refurbishment within an existing facility including small power and lighting design solutions
  • Typically, the following duties will be undertaken: -
  • Input into programmes, design cost estimates, quality plans and CDM documentation
  • Produce optioneering documents, scope of work documents, output / engineering strategy documents, site survey reports / notes for the record, technical specifications / user requirements specifications and outline installation method statements
  • Prepare sizing calculations - cable & cable management (LV) and lighting calculations
  • Provide input into CS&A requirements
  • Supervise the production of EC&I Design documentation and check drawings including: -
  • Equipment location / installation drawings
  • Cable routing drawings
  • Equipment strip-out drawings
  • Single line diagrams / block cable diagrams for electrical distribution systems (LV)
  • Earthing diagrams
  • Lighting and small power layout drawings
  • Termination schedules/diagrams
  • Attendance at relevant project meetings and workshops
  • Site surveys of plant, equipment and building infrastructure including production of notes for the record
  • Attendance and presentation of EC&I design package at single discipline design reviews, produce minutes of meetings and ensure the timely close-out of actions
  • Attendance and presentation of EC&I design package at multi discipline design reviews, produce minutes of meetings and ensure the timely close-out of actions
  • Attendance at constructability reviews (“HAZCON”)
  • Occasional visits to site in Cumbria, (including overnight) and offices in Risley, Warrington will also be required
  • Previous experience of a similar role within the nuclear (ideally SL) or equivalent regulated industry, undertaking duties as described above
  • Understanding of the design process and experience in all stages of design (concept, front end through to completion including construction support)
  • Evidence of having a sound working knowledge and experience of relevant Electrical equipment legislation
  • Appropriate qualification in the relevant discipline, e.g. MEng, BEng, BSc, HND, HNC
  • Proven ability in delivering quality & efficient engineering solutions
  • Self-motivated and capable of arranging own work, able to work with minimal supervision and as part of a team to meet challenging client deadlines. Ability to lead a small team of engineers and designers
  • Monitored worker preferred or able to obtain monitored worker status
  • Experience of Amtech, Dialux/Relux and AutoCAD 2D
  • Microsoft office suite (Word, Excel, PowerPoint, Outlook, and Skype)
  • Revit/3D Design would be an advantage
  • Cimage/DM Desktop would be an advantage
  • Candidates should be eligible for security clearance
63

Senior Electrical Draughtsperson Resume Examples & Samples

  • Effectively deliver the Electrical Engineering Design in line with the overall project goals, ensuring technical integrity
  • Execute Electrical Design activities
  • Support Management
  • Able to use CAD systems
  • Take full cognisance of Health, Safety and Environmental issues
  • Utilise suitable technology to increase efficiency
  • Work within a multidiscipline team
  • Interact with other team members
  • Relevant qualification in draughting
  • Conversant with relevant international standards and Codes or Practice
  • 5 years’ experience related to the offshore oil and gas industry
  • Have experience in using CAD systems
64

Senior Electrical Eng Resume Examples & Samples

  • Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated)
  • Present reviews of technical data to program leadership and technical staff
  • Must have a Bachelor of Science in Electrical Engineering from an accredited University, with 5+ years of professional experience
  • Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits
  • Must have strong teaming skills, and good communication skills
65

Senior Electrical Design & Systems Engineer Resume Examples & Samples

  • Sonar
  • Imaging
  • Motors & motor controllers
  • Bachelor's Degree in Electrical, Software or Computer Engineering
  • Minimum of 5 years of related experience including hands-on design, testing, troubleshooting, operation and maintenance of complex systems OR 3 years with an MS Degree
  • Active DoD Top Secret Clearance, US Citizenship is required
  • Minimum of 9 years of related experience including hands-on design, testing, troubleshooting, operation and maintenance of complex systems OR 7 years with an MS Degree
  • Experience with embedded systems, computer networks, data communications, analog & digital circuit design, solids modeling, software development, engineering drawings and technical writing
  • Possession of programming skills including C, C++, C#, SQL, XML and MS Windows application development
  • Proficiency in MS Visual Studio, .NET and SolidWorks is desirable
66

Senior Electrical Eng Tech Resume Examples & Samples

  • Conducts complex tests of prototype and production equipment or components assuring a quality product
  • Interpreting complex design drawings and schematics
  • This position does not directly provide leadership or supervision to other employees
  • Strong ability to interpret drawings and schematics
  • Willing to travel (10%-40%)
  • Related technical training and 2 or more years of experience with electrical systems
  • General Electronic aptitude
  • Effective written and oral communication skills
  • Ability to multitask and prioritize tasking
  • Ability to work extended hours to meet program goals
  • Ability to obtain and maintain a SECRET level security clearance
  • Working knowledge of Military specifications is a plus
  • Working knowledge of Military hardware is a plus
67

Senior Electrical Utilities Engineer Resume Examples & Samples

  • Oversees, and provides system ownership and troubleshooting of site electrical distribution systems including, but not limited to: Emergency Generators, Uninterruptible Power Supplies, Automatic Transfer Switches, Power distribution switch Gear, Transformers
  • Responsible for all electrical aspects of the equipment used the manufacturing process and environment, including, but not limited to: BioReactors, Process tanks, Cleaning systems, Fill machines, Isolators, packaging equipment, lighting, emergency systems, Air Handling Units, Exhaust Fans, HEPA Filtration Equipment
  • Responsible for all electrical aspects of the equipment used in the utilities plant including, but not limited to: WFI generators, RO systems, HVAC, chillers, cooling towers, boilers, waste systems
  • Provides engineering support for HVAC and utilities equipment/Systems
  • Prepares complex designs, standards, studies and analysis
  • Provides a detailed design review of internal and external technical documents
  • Generate and complete critical systems change control
  • Conduct and lead failure Root Cause Analysis (RCA) and generate appropriate CAPA, change control, reports
  • Plans and develops project budgets with appropriate/required documentation
  • Ensures compliance with codes, standards, and design, operation, and maintenance requirements
  • Identifies potential areas of weakness with assigned work, and initiates corrective action
  • Supports emergency response work as requested including immediate and extended restoration efforts driven by weather and other system failures
  • Must follow safety rules and ensure compliance with CA state and federal EPA regulation and laws
  • May participate in On-Call rotations for after-hours facility and manufacturing support and may work outside of established shift hours upon short notice
  • May lead or coordinate the work of junior engineers, engineering assistants, technicians, and others who assist on in work/project activities (This includes contractor/consultants.)
  • Good interpersonal skills and be able to work effectively and efficiently in a team environment. Good customer service skills
  • Must be able to read, write, and converse in English
  • Good computer skills, knowledge of Microsoft Outlook, Word and Excel
  • Must be able to navigate, conduct searches, and fill on line forms on Personal Computer for the purposes of training, performance management, and self-service applications
  • Must have passion to innovate and drive for solutions
  • Must display personal accountability for results and integrity
  • Must display eagerness to learn and continuously improve
  • Must have uncompromising dedication to quality
68

Senior Electrical / Process Controls Engineer Resume Examples & Samples

  • Baccalaureate degree in Electrical Engineering required
  • Master Degree preferred
  • Minumum 4-8 years experience of E&I design in the chemical or heavy manufacturing industries
  • Experience with all applicable US codes (e.g. The National Electrical Code, NFPA 70E, NFPA 497, NFPA 499) and design standards is required
  • Knowledge of other global codes/standards is preferred
  • Field experience in performance testing (FAT, SAT), commissioning, troubleshooting, and startup activities required
  • Experience with design and installation of process control systems (both PLCs and DCSs) is a plus
  • Excellent computer skills including Microsoft Word, Excel, and Powerpoint required
  • International experience in Asia-Pacific, Europe, or South America is a plus
69

Senior Electrical Center Design & Release Engineer Resume Examples & Samples

  • Bachelor of Science Degree (Electrical Engineering, Computer Science, Technology - with subsequent experience, Math, Physics)
  • 5 or more years of experience with generating and executing technical solutions for electrical/mechanical components to support new vehicle programs
  • Experience leading projects and providing technical leadership for advanced component or technology development
  • Performing complex design analysis and evaluating engineering designs
  • Working cross-functionally to implement cost reduction, methods and product improvements, and to support prototype and production build activities
  • Balancing business imperatives, including but not limited to cost, mass, complexity, and timing
  • Production design release of Electrical Centers parts and subsystems
  • Communicating information to and from internal and external customer organizations
  • Staying abreast of relevant new technology and competitive product
  • Familiarity with the engineering design of Electrical Centers or equivalent experience (Switches, Connectors, Modules)
  • Familiarity with Design For Six Sigma process (DFSS)
  • Experience with DFMEA (Design Failure Mode and Effect Analysis) and GD&T (Geometric Dimensioning and Tolerancing)
  • Knowledge of plastic and metal materials, processes, and tooling (Stamping Die, Injection Molded)
  • Ability to package a module into a vehicle environment
  • Master’s Degree or other Advanced Degree
  • Injection Molded Plastic Design
  • Mechanical Beam Analysis
  • Fuse Relay and Terminal selection application
  • Electrical Center in Depth Design and application
  • Schematic implementation to PCB Design
  • Printed Circuit Board design review and analysis
  • Establish and create component design requirements
70

Senior Electrical Solutions Engineer Resume Examples & Samples

  • Responsible for the technical and commercial sales support of the Rockwell Automation offerings that are focus of Intelligent Packaged Power (IPP)
  • Organize and lead project teams consisting of various support groups in order to respond effectively to unique business opportunities in the marketplace and promptly determine fit and strategy for the Rockwell Automation Intelligent Packaged Power Offering
  • Develop territory sales, distributor and customer competency through conducting regular learning sessions, participate in/coordinate Rockwell lead and co-marketed network seminars and trade shows
  • Collect, analyze and communicate market data including competitive information, trends, key wins/losses and service development needs to the BU product management teams
  • Work with IPP Team to develop the Scope of Supply and Bill of Materials for proposals
  • Support IPP Team in identifying new business, breaking down specific customer requests, and supporting the proposals/sales process as required
  • Achieve assigned targets in terms of business revenue and management objectives
  • Manage or perform activities to identify and pursue business opportunities utilizing RA resources to target customers within packaged power market segment. Participate in planning and execution efforts with other RA business resources, account teams and channels
  • Evaluate customer needs and develop business strategies to achieve customer acceptance and adoption of RA product portfolio. Determine appropriate technical, marketing & contractual approach consistent with the organization’s objectives
  • Negotiate commercial features and arrangements with potential business partners, customers and internal groups while effectively representing RA
  • Provide technical and commercial guidance and training to core Integrated Packaged Power Team
  • Understand packaged power market place and competitive Electrical Control Systems offerings to help develop Rockwell Automation ECS products and services to compete in the industrial space
  • Bachelor’s Degree in Electrical Engineering or Electrical Power Technology related field
  • 8+ years of solid experience supporting consultative sales, with the ability to develop technical value propositions
  • 8 + years of solid experience in Electrical Project engineering, with emphasis on Electrical Power Distribution projects in heavy industry space
  • Must be willing and able to travel up to 50%
  • Proven experience of working in complex environments; and managing conflicting demands and expectations
  • Engineering, Specification and Installation experience with Low Voltage and Medium Voltage NEMA/ANSI Electrical Equipment
  • Demonstrated understanding of electrical projects, electrical equipment, including Rockwell Automation Power Products and non-Rockwell products as required by customer needs
  • Strong consulting skills, including solid written, oral, analytical, and presentation skills required
  • Experience with industrial automation technology heavy industries
  • 5 years of technical sales support in Electrical Construction or heavy industry Electrical Equipment
71

Senior Electrical Drafting Designer Resume Examples & Samples

  • Drawing Transmittals. Interfaces communications from COE to Customer/Production/SCM receiving engineering information, acknowledging and distributing action items among COE. Engineering milestones data handling and reporting. Ability to interact with other ABB Locations (SLP). Transmits Data/Orders to SLP
  • Using ePLAN Electric P8, AutoCAD, MS Excel, Word, Project and other applications drafting and generation of
  • Low Voltage Component and Panel Layout Drawings and Wiring Diagrams
  • Wire Marker, Component Identification Labels
  • Quality Assurance Procedures and work instructions
  • Engineering Schedule Reports
  • Produce a variety of documents using various software packages. Manipulate data on existing spreadsheets and/or database software programs. Maintain electronic and printed documents filing systems including those of a highly confidential nature. Transmit decisions and instructions for supervisor. Investigate and answer inquiries of a non-routine nature and respond to complaints, as authorized by order management
  • Screen drawing approval, production and post production related mail, highlighting action items and attaching relevant information. Correlate and edit materials submitted to orders, as authorized, interacting with engineers to assist in resolution of problems
  • Associate's Degree in engineering with 5 years professional drafting experience, else 3 years same experience with 4 year accredited degree , else 9 years same experience with HS degree
  • Previous experience with Power products such Switchgear , Breakers or other Utility based electrical / industrial products
  • Ability to check and review designs prior to sign off by the relevant Engineer. Act proactively and consequent upon shop floor action requests
  • Ability and willingness to carry out electrical drafting aspects of product. Demonstrable experience in meeting the project deliverable dates
  • Advanced working knowledge of Spreadsheet Applications. Material Master Creation in SAP, BOM Creation
  • Previous experience with SAP
  • Previous work electrical drafting experience with AutoCAD and/or Eplan software.. Exposure to Mechanical drawings using Solidworks would be an additional plus
  • Candidates with work authorization that would permit them to work for ABB in the US
72

Senior Electrical Test Technician Resume Examples & Samples

  • Perform Inspections, testing and maintenance on low, medium and high voltage power distribution equipment
  • Maintain and repair various equipment such as transformers, circuit breakers and switchgears
  • Complete maintenance activities during plant shut-downs
  • Maintain daily, weekly and/or monthly reports and inspections as required
  • Work with and take direction from the Project Manager
  • Learn, understand, and comply with safety, and other emergency practices
  • Inform the supervisor of any condition deemed to be unsafe
  • Learn, understand, and comply with all company and customer policies
  • Participate in training directed at increasing job-related skills and to maintain NETA certification
  • Assist in training of other employees as directed
  • Assist in emergencies as needed including emergency calls at non-scheduled hours
  • Ensure that all work areas are returned to a clean, neat, orderly, and safe condition
  • Report to supervisor any information having the potential to affect customer or employee relations
  • Respond in a professional, polite, and helpful manner when dealing with other staff and customers
  • High School Diploma, GED
  • NETA or NICET certification, or equivalent utility or manufacturer training
  • Minimum of three (3) years of experience in the testing and evaluation of electrical power systems
  • Valid Driver’s License with an insurable good driving record
73

Senior Electrical Commissioning Engineer Resume Examples & Samples

  • Bachelor of Science degree in Electrical Engineering or a related field
  • Five years of progressively responsible technical experience in the design and construction of building lighting, power, telecommunications, fire alarm, and other electrical systems
  • Demonstrated aptitude for working with electrical and mechanical systems and equipment
  • Knowledge of the Michigan Building and Electrical Codes, and related industry standards
  • Knowledge of architectural/engineering firm design practices and building construction management
  • Willingness to work in both an office and construction site environment
  • Significant experience creating documents using Microsoft Word or similar software. Experience with Microsoft Excel and other engineering software related to electrical or mechanical design and commissioning
  • Familiarity with the building commissioning process
  • Registration as a Professional Engineer
  • Experience in the leadership of design and construction personnel
  • Experience on large capital projects for classroom, laboratory, housing, and assembly occupancies
74

Senior Electrical / Automation Engineer Resume Examples & Samples

  • Strong electrical/control design experience with focus on conformance to NFPA standards
  • Solid presentation and computer skills (Excel/Word/PowerPoint/Projects/AutoCad, etc. )
  • Experience in automated assembly equipment
  • Solid experience in trouble shooting equipment using conventional diagnostic tools and PLC software
  • Experience with Rockwell PLC’s /Safety PLC’s (SLC/CompactLogix and ControlLogix Platforms) and supporting development software
  • Experience with Rockwell HMI’s and associated development software
  • Experience in 6 axis joint and SCARA robotics and associated development software
  • Experience with vision systems (Cognex/Adept preferred)
  • Experience with servo and stepper motion control amplifiers controllers and positon feedback devices
  • Experience with machine risk assessment methodology and required electrical safety circuitry
  • Nice to Have
75

Senior Electrical Resume Examples & Samples

  • Technical guidance and quality oversight, including code review, of all project work involving electrical engineering
  • Technical training and development of staff
  • Establishing and improving standards, practices, guidelines, and specifications for electrical discipline area
  • Engineer of Record
  • Provide 'on-the-spot' advice and decisions - technical and cost estimates
  • Coordination with all of the disciplines involved, including outside consultants
  • Technical interface with code officials and contractors
76

Senior Electrical Automation Technician Resume Examples & Samples

  • Providing electrical expertise in the areas of machine improvements, electrical automation/instrumentation and electrical project activities
  • Install, commission and perform routine equipment preventive maintenance within timeframe standards
  • PLC, HMI & SCADA programming
  • Provide troubleshooting skills to resolve equipment performance issues from an electrical automation perspective and develop plans to minimize future problems
  • Manage and supervise external electrical automation service providers
  • Apply Continuous Improvement tools to develop new automation solutions
77

Senior Electrical Validation Engineer Resume Examples & Samples

  • Working closely with architect/design team to review board design, architecture change and define validation strategy
  • Actively engaging with our partners HFW/FW/SW to ensure high quality incoming collaterals
  • Representing the team in providing quantitative & qualitative input to Silicon Tape-In/Tape-out decision
  • Ensuring timely execution of all validation contents and proper disposition of failures/sightings
  • Coordinating with other technical leaders across organizations to define common validation processes and methodologies
  • Developing/improving strategies to ensure products meet and/or exceed the expectations of customers
  • Developing comprehensive validation methods designed to expose product deficiencies based on requirements of datacenter storage customers
  • Strong problem solving skills: identifying, isolating, and debugging issues and providing creative solutions
  • Strong communication and influencing skills
  • Independently work across Validation disciplines and geographies
  • Good planning skills & strong ability to multi-task and work in a dynamic and team oriented environment
  • Strong communication and presentation skills, and an attention-to-detail mindset is sought out for this position
  • Candidate should have hands-on experience with RF lab measurement equipment such as oscilloscopes, JBERTs, TDRs, VNAs, customized adapter-boards, SMA-cables, Power-Analyzers, etc.
  • Excellent ability to logically organize and clearly present experimental data is a must
  • Programming experience Python, Perl, C or C++ is a desired must have
  • Proficiency with Linux, Allegro Cadence
78

Senior Electrical Resume Examples & Samples

  • Evaluate client requirements and write design basis and scope of E/I work
  • Provide hands-on electrical/instrumentation engineering while mentoring less experienced engineers
  • Preparation of various station studies/calculations including electrical system load studies, short-circuit analysis, relay coordination, arc flash studies, motor starting system dynamics, harmonics analysis, ground fault analysis, and other calculations such as lighting level, heat trace, voltage drop, conduit fill, etc
  • Contribute to the refinement of E/I departmental procedures and company specifications as a member of Senior E/I leadership team
  • Utilizes specific software packages including ETAP, SKM, Easy Power, etc. for electrical system modeling and scenario studies
  • Engineering/design of instrumentation systems for facility/pipeline measurement and control, including field instruments, control valves, pressure safety devices, station/unit control, emergency systems control, alarm/security systems, etc
  • Minimum experience required is 10 years
  • Able to make decisions on specific project items which will promote the achievement of overall project objectives
  • Able to view problems form many different sides to develop the best overall solution
  • Ability to work flexible hours, occasionally in excess of a normal 8 a.m. to 5 p.m. schedule
  • Ability to travel freely within the United States and internationally as dictated by project requirements
79

Senior Electrical Components Engineer Resume Examples & Samples

  • The generation of electrical component plans based upon customer design specifications
  • Working closely with the program/project electrical design team to identify components by part number which are compliant to the over-arching component plan
  • Manage and support component obsolescence activities such that all issues are identified timely and solutions generated
  • Generate and submit PARS (Part Approval Requests) and NSPARS (Non Standard Part Approval Requests
  • Provide all customer data item deliverables regarding electrical components
  • Work to determine necessary DPA (Destructive Parts
  • Experience generating and submit PARS (Part Approval Requests) and NSPARS (Non Standard Part Approval Requests
  • Proficiency to determine necessary DPA (Destructive Parts Analysis) requirements per customer specification
  • Ability to work closely with the procurement team as well as with suppliers regarding all aspects of component procurement
  • Knowledge of working multidisciplinary environment, in support of principally Space and Military Customers
  • Experience working in components engineering
  • Familiarity with radiation and nuclear environments is a plus
80

Senior Electrical Relay Field Technician Resume Examples & Samples

  • Responsible for the protective relaying and electrical metering systems across all Texas Operations sites (i.e. distribution and transmission substations, power plant switch rooms, chemical process plant switch rooms, dedicated fiber optic networking, and SCADA systems)
  • Quickly respond to callouts across the site to troubleshoot issues and events that affect the power distribution electrical network
  • Complete the testing requirements of electrical meters and protective relays, both electromechanicals and microprocessors - SEL (Schweitzer Engineering Laboratories)
  • Support commissioning and start-up activities for new electrical equipment as needed
  • Perform "hands on" wiring and general electrical work behind energized relay panels, including the installation of temporary and permanent relays, metering, etc
  • Review and revise Meter & Relay (M&R) one-lines and issue updates
  • Keep the relay calibration schedule up-to-date (monthly accounting)
  • Review relaying testing procedures each month
  • A minimum of 5 years of prior experience working with relays and relaying schemes in transmission and distribution systems is required
  • Working knowledge of the theories and working practices of a journeyman electrician. Such knowledge is typically attained by completing at least two years of technical training in electrical theories and practices and five to ten years related Electrical Power experience
  • Working knowledge of current transformer (CT) and potential transformer (PT) circuits and basic relaying circuits
  • Working knowledge of high voltage and medium voltage substation configurations (Ring bus, breaker-and-a-half, Main-Tie-Main, etc.)
  • Must be comfortable and competent to work with energized metering, control, and protection circuits. This is a routine job requirement and expectation
  • Attention to detail is a daily requirement due to the potential for site level system upsets and lost production
  • Able to read and decipher electrical schematics and wiring diagrams, relay one-lines, 3 lines, and Logic diagrams, as well as perform troubleshooting from these drawings
  • Competent in Microsoft Office applications (Excel, Word, Outlook) and be able to perform record keeping functions associated with the work
  • Experienced with calibrating electromechanical relays and be able to troubleshoot electromechanical relay actions
  • Must be willing and able to perform frequent bending, reaching, and lifting
  • Must be willing and able to work in tight or closed-in spaces
  • Must be willing and able to climb stairs/ladders and work high off the ground
  • Must be willing and able to lift a minimum of 50 lbs
  • A valid U.S. driver license is required
  • Working knowledge of the National Electrical Code is preferred
  • Experience configuring a laptop to communicate with microprocessor meters, relays, etc., using various manufacturers’ software is also preferred
  • Experience in microprocessor relays (i.e. SEL) is preferred
  • Knowledge and experience with Lockout/Tagout and Electrical Safe Work Permits is preferred
81

Senior Electrical Integration Engineer Resume Examples & Samples

  • Electrical integration for launch vehicles, aircraft, satellites, or payloads
  • Avionics systems integration for launch vehicles, aircraft, satellites, or payloads
  • DC Power systems design and integration for launch vehicles, aircraft, satellites, or payloads
  • Integration and/or simulation of sensor and instrumentation such as pressure transducers, RTDs, thermocouples, accelerometers, etc
  • Integration and/or simulation of solenoid valves, servo valves, and electromechanical actuators
  • Systems Engineering - Must be able to decompose requirements and understand system verification, validation and accreditation activities
  • Avionics and Power Systems - Must know how to read and interpret avionics architecture diagrams, cable interconnect diagrams, and associated system schematics. Fundamental understanding of inertial navigation systems, power distribution systems, and fault tolerant architectures is critical
  • Data Busses - Must have working knowledge of MIL-STD-1553B, Ethernet, RS-422, and RS-485
  • Data Acquisition Systems - Must understand how to integrate analog and discrete signals into a data acquisition system. Preferably a real time system
82

Senior Electrical Engineering Technologist Resume Examples & Samples

  • Electrical design and drafting
  • Coordination and preparation of project specifications
  • Ensuring design work interfaces with that of other disciplines
  • Contributing to the planning and scheduling of work to achieve prescribed objectives
  • Contributing to project controls and preparation of progress reports
  • Reviewing substitutions in materials
  • Consulting with other departments, suppliers and contractors to clarify specifications
  • Keeping abreast of new technical developments and estimating their impacts
  • Technical research related to electrical systems and materials
  • Participating in technical studies and creation of reports
  • Providing construction phase services, e.g. shop drawings review, site inspections, etc.; and
  • Project specific roles to be determined by department and project managers
  • Registration or eligibility to register as a CET
  • Good understanding of engineering disciplines and knowledge of reciprocal effects of work upon other disciplines/fields
  • Understanding of contracting process for construction projects
  • Good understanding of industry and regulatory standards and design criteria; and
83

Senior Electrical Field Assurance Engineer Resume Examples & Samples

  • On behalf of the Project Manager, represent the Chief Engineer by providing Technical Acceptance of the Contractors’ submissions (including method statements and work package plans, on a risk based approach and where obligated by third party agreements) to ensure compliance with the Employer’s Requirements, the NEC3 Contract, the Works Information Volumes 2A/B/C and CRL’s Technical Assurance Plan, processes and procedures
  • Disposition and approval of changes to technical requirements (as delegated by the Chief Engineer), including relevant system performance specifications and technical standards
  • Provide oversight of design completion and compliance for the Works and/or Element(s), including ensuring all boundaries, interfaces and systems are integrated and coordinated between interfacing contracts
  • Provide resolution of arising technical issues, RFI’s, FCD’s, NCR’s, derogations, concessions
  • Support the production and acceptance of the Employer’s Verification Activity Plans, including review and acceptance of the Contractor’s Inspection and Test Plans (ITPs), compiling comments, and validating the required Witness, and Review points based on the respective technical and quality specification of the contract and applicable code requirements (supported by the Project Manager, the Chief Engineer and Quality Manager)
  • Provide risk based assessment of assurance evidence produced by Contractors in areas including materials compliance, requirements compliance, interface management, verification and validation, RAMS, EMC, As Built information
  • Liaise with Crossrail infrastructure managers to facilitate their ultimate acceptance of the Works
  • Represent the project at relevant technical panels, design reviews, etc. Including those attended by external parties
  • Support the named Supervisor’s Representative under NEC3 ECC and as further defined within Crossrail’s Quality Management system and the Contractors obligations for a self-assuring framework
  • Support the Project Manager to coordinate Crossrail’s obligations (Client, Designer and Principle Designer) under CDM 2015 as set out in the CDM Procedure and Project Execution Information
  • As part of CRL’s Assurance Process provide technical representation for and on behalf of the Chief Engineer for acceptance of witnessing tests, inspections and verification activities for an the Works
  • Support the Project Manager in the responsibility for compliance with the LU Development Agreement (See Volume 2B Part 11), Docklands Light Railway Interface [Part 12], and Network Rail Interface [Part 10] where applicable
  • Monitoring the contractor’s compliance with Environmental, Safety & Health requirements, escalating issues and seeking intervention where required
  • Support the Project Manager by undertaking surveillance activities of the Works (as per CRL’s processes)
  • Reviewing and accepting the Contractors Commitments Compliance Plans, Construction Certificates and data to support the Employer’s Completion Process and Handover Management Plan
  • Assisting the Project Manager with the authorisation of payment certificates
  • Providing input to the Business Manager on costs to be disallowed related to quality issues and NCRs
  • Take reasonable care of your own and others’ health and safety and of those who may be affected in the day-to-day performance of this role by taking personal responsibility for working to the Crossrail Target Zero principles
  • Act as a role model for Crossrail’s vision and values, behaving in ways that are in alignment with Crossrail’s Ways of Working. Encourage and support others to do so, too
  • Promote equality in the workplace and adopt appropriate behaviour when interacting with colleagues
  • Take necessary care to properly protect the confidentiality, integrity and availability of corporate information from unauthorised disclosure, modification or destruction
  • Never knowingly put Crossrail’s information or information systems at risk
  • Main challenges of the job
84

Senior Electrical Sytems Engineer Resume Examples & Samples

  • Demonstrates good understanding and applies knowledge of an engineering discipline
  • Applies engineering and/or scientific skills and continues to develop experience in creating engineering solutions
  • Utilizes Software-in-the-loop (SIL) and Hardware-in-the-loop(HIL) methodologies, Matlab scripting language, and NI test stand, to execute software validation. This may include developing test plans, executing test plans, updating plant models, capturing and managing issues, and documentation of results. Module, Bench, and Product-level testing methods may also be utilized
  • Performs systems design/architecture for portions of a controls design. Including: development and maintenance of requirements; requirements allocation; architecture definition and review; definition of interfaces (API); capability determination through
85

Senior Electrical Service Department Manager Resume Examples & Samples

  • Strong electrical background with experience in electronic controls, PC software, motors, PLC’s and variable frequency drives
  • Ability to supervise, delegate and organize department while maintaining individual projects
  • A Red Seal Electrical Certification is required or extensive experience in the Livestock industry is required
  • Strong PC networking and knowledge of Microsoft Office
  • Excellent communications, interpersonal and organizational skills
  • Must be independent and a self motivator
  • Experience in the Hog/Agricultural industry working with controls or micro-processor based systems for ventilation, feeding or watering systems is a must for this position
  • CET certified and AutoCAD experience with electrical panel layouts, etc. also considered an strong asset
  • Excellent time management skills, ability to handle high stress and the ability to multi task is imperative for this position
  • Electrical design & takeoffs
  • Working with relevant government and regulatory agencies to ensure permits, updates of codes, etc
  • Must speak and write fluent English
86

Senior Electrical Packaging Engineer Resume Examples & Samples

  • 8+ years Electrical/Mechanical Component Engineering experience
  • Automotive, Military, Commercial Vehicle engineering experience
  • Previous experience with installation of electrical components in Driving and Living area
  • Previous experience with functional dimensioning, tolerances and mechanical part design
  • Functional dimensioning, tolerances and mechanical part design
  • Excellent Catia skills, experience with CAD conversioning and neutral formats
87

Senior Electrical Packaging Engineer Resume Examples & Samples

  • Develop / Maintain Design Documentation, including CAD design data and installation drawings
  • Develop / Maintain Product Structure
  • Contribute to Technical Strategies and Roadmaps
  • Perform analytical calculations in support of designs
  • May require leading teams in functional areas
  • Product cost mindset
  • Product quality mindset
  • Quality methods & tools
  • Communication – both verbal and written
  • Effective Meeting Coordination
  • Time Management
  • 8 or more years of progressive automotive experience
  • Proper knowledge of development processes for wiring harnesses, related routing and clipping components as well as other electrical components
  • Strong PC skills are highly desirable
88

Senior Electrical Safety Engineer Resume Examples & Samples

  • Ensure that products comply with the requirements of UL and LVD
  • Support all products released to the market on safety aspects
  • Negotiate with the development team and UL authority
  • Do the final approval of products before they enter the market
89

Senior Electrical Application Engineer Resume Examples & Samples

  • Lead the integration aspects of HARMAN’s new product development programs at the customer’s site
  • This position requires a BS degree or equivalent in Engineering, preferably in Electrical Engineering, though Mechanical Engineering / Acoustics backgrounds will also be considered
  • 2-5 years of design or development engineering experience in vehicle electrical/electronic subsystems
  • Ability to perform hands-on electrical measurements using a wide variety of equipment (such as an oscilloscope, bus message logging equipment, system benches, etc.)
  • Experience working as an Audio/Electronics Resident Engineer
  • Familiarity with Design for Manufacturability (DFM)
  • A history of successful, proactive performance supporting challenging customers
  • Strong written communication skills – must be able to clearly and concisely communicate technical information
  • Strong interpersonal skills – must work well on a team with customer and Harman functional groups
  • Ability to manage several projects efficiently and meet schedules, as well as work under pressure and maintain a high level of output
  • Strong computer skills using Microsoft products
  • This position requires local and occasionally worldwide travel
  • While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to stand and walk. The employee must be able to lift up to 50 lbs
  • Experience with requirement definition using structured analysis methods
  • Experience with electromagnetic compatibility design, development or testing
  • Recalls details, precedents and prior events to ensure consistency. Recalls education and training and applies concepts to the job. Excellent communication skills for identification of both problems and solutions
  • Demonstrates the ability to conceptualize. Solves problems through deductive reasoning
  • Pays attention to details affecting overall outcome of work. Identifies trends and problems accurately and quickly
  • Applies education, training and experience toward mastery of job requirements
  • Communicates detailed or technical information clearly. Logically organizes ideas; gives open and honest feedback
  • Demonstrates sufficient business vocabulary to communicate effectively and develop professional rapport with others
  • Uses techniques to manage stress so that it does not interfere with the accomplishments of the work. Maintains calm demeanor even during stressful periods. Demonstrates ability to accept criticism
  • Overcomes obstacles to getting the work done. Keeps promises and meets commitments. Demonstrates personal integrity in all interactions. Maintains confidences
  • Demonstrates ability to take charge when necessary. Manages self-control to ensure the ideas of others are heard. Stands up for personal opinions
  • Demonstrates ability to work effectively with others possessing less experience or technical expertise. Can accept decisions which go contrary to personal ideas and beliefs. Can accept compromise
  • Demonstrates ability to get ideas across through clear and logical communication. Demonstrates ability to lead meetings, speak in public, and prepare written correspondence
  • Performs activities which are uncomfortable to achieve personal growth
  • Recognizes the motivations and hidden agendas of others. Strives for win-win outcomes. Accurately relays progress, obstacles and opportunities
  • Displays empathy and maintains solid working relationships. Accurately interprets the feelings of others. Demonstrates compassion through words and actions
  • Is driven to accomplish more than is necessary. Seeks to exceed established standards. Is innovative and creative in accomplishing the work
  • Takes appropriate role in the team, leading or following. Accepts the decisions of the team
  • Effectively plans and organizes projects impacting the work of others. Meets deadlines without disruption to daily operations. Adapts to change
  • Design engineering, automotive development environment, geometric dimensioning and tolerancing, basic manufacturing techniques (injection molding, metal stamping, soldering, welding, forming, etc.)
90

Senior Electrical Instrumentation & Controls Engineer Resume Examples & Samples

  • Implement capital building & equipment installations and to improve manufacturing competitive performance
  • Development of manufacturing equipment, processes, and procedures essential to line extensions, product improvements, and new product development
  • Manage project scope, schedule, and finances to meet predetermined Clorox business objectives
  • Provide technical analysis, project cost and schedule estimation, engineering effort forecasting, design recommendations, preparation of design and equipment specifications, design, review of design documents, development of construction sub-contract documents, and lead construction, commissioning, and start-up activities at plant facilities
  • The primary focus of this position is electrical and controls functional engineering leadership on Clorox Capital Project teams for medium to large size projects. Leads EIC engineering efforts through all phases of capital projects -- conceptual, feasibility, scope definition, cost estimates, functional requirements, system design, scheduling, procurement, construction, testing, commissioning, startup, and validation. Demonstrates proficiency in developing and managing estimates, financial analysis, contracts, and purchase orders. Includes the use of Clorox Early Management principles and activities to deliver customer expectations with vertical and sustainable project execution. Support system start-up and operational checkout on systems including configuration, wiring, calibration, and power testing. Provide hardware and software application support assistance to engineers and operations. Utilize technical materials such as equipment manuals, system drawings, P&IDs, schematics and blue prints to troubleshoot and repair complex electrical/control systems. Interpret industry, regulatory, and company specifications and standards and apply to projects. Provides significant contributions and technical leadership for major technology efforts in the organization, either as an individual or team member. Position requires approximately 60% travel
  • 8+ years of relevant experience (Experience should also include 2 years of production/operational work)
  • Motivation & commitment to lead and direct others to exceptional results
  • Analytical & decision making skills that integrate technical and business factors
  • Effective communication skills in formal and informal settings using both written and verbal communication skills
  • Planning and organizing skills to manage project priorities and coordinate other function activities and cross functional teams (i.e. -- Electrical/Instrumentation/Controls, WCO, Quality, Capital Project Management, Safety/Health/Environmental, and Research and Development)
  • Adaptation & flexibility skills to recognize the need for change and to initiate the change process
  • Experience in batch, continuous, and discrete manufacturing
  • Strong technical skills related to electrical/instrumentation and controls
  • Strong working knowledge of Allen Bradley hardware and software
  • Working knowledge of NEC, ANSI, IEC, NEMA, NFPA
  • Working knowledge of industrial power and lighting applications; power distribution; and MCC, conduit and wiring
  • Working knowledge of data collection systems
  • Working knowledge of ISA --S88, PackML and OMAC standards
  • Ability to develop, read and interpret P&IDs and electrical drawings
  • Engineering or operations experience with consumer packaged goods packaging equipment and systems preferred
  • Position requires approximately 60% travel
91

Senior Electrical Product Development Manager Resume Examples & Samples

  • Bachelors Degree in Electrical Engineering or related discipline; advanced degree in Engineering or MBA is preferred
  • Minimum 10-12 years of related experience with significant product development and manufacturing exposure
  • Experience with financial measures and metrics – at project level and P&L level
  • Experience with manufacturing processes such as injection molding, casting, forging, fabricating, etc.; ability to cost components based on manufacturing process (cycle time, fill rate, cooling time), and assess manufacturability (i.e. gate location, tooling material, cooling system design)
  • Strong strategic vision, critical thinking, and problem solving required
  • Effectively work with teams and suppliers from different cultures and countries
  • Ability to influence across the organization – both within and outside of own function
  • Demonstrated success managing multiple projects concurrently in a fast paced environment
  • Demonstrated mechanical aptitude and problem solving
  • Working knowledge of engineering principles - fluid, mechanical, thermal and strength of materials, Failure Mode Effects Analysis (FMEA), Design of Experiments (DOE), Quality Function Development (QFD), Design for Assembly (DFA) and Design for Manufacture Assembly (DFMA)
  • Ability to present convincing arguments for ideas and new concepts to senior management
  • Willingness to travel up to approximately 15% of the time, both domestically and internationally
92

Senior Electrical Equipment Technician Resume Examples & Samples

  • Minimum of 5 years directly related experience
  • Successful completion of Electrical Equipment Technician Development Program or equivalent directly related utility/industrial electrical experience
  • Detailed knowledge of the various manufacturers and substation equipment installation, maintenance guidelines and electrical test equipment
  • Strong technical competency in programming PLC's and in interpreting logic diagrams
  • Strong knowledge of electrical control wiring and proficiency in interpreting control and relay functional diagrams
  • Good verbal and written communication skills, to include strong ability to issue written procedures and to write root cause reports
  • Demonstrated basic leadership skills necessary to provide peer oversight,
  • Abilities: Test and troubleshoot complex high voltage substation and power station electrical equipment, use high voltage test equipment, work under pressure situations, carry heavy test equipment
93

Senior Electrical Design & Analysis Engineer Resume Examples & Samples

  • Publish reports detailing the aircraft electrical load and bus capability
  • Utilize existing software to complete Electrical Load Analysis
  • Leverage existing tools and help develop a path forward for a common tool for ELA
  • Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious
  • Develops advanced technical ideas and guides their development into final product
  • Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and
  • 1+ years of experience as an electronic design team lead
94

Gdcs Senior Electrical Commissioning Engineer Resume Examples & Samples

  • Detailed knowledge of electrical power systems and equipment from grid to chip
  • Experience with reliability and availability studies
  • Selective coordination and available fault current study experience
  • Fluent and effective communication skills
  • High voltage substation protection and design experience
  • Experience with low voltage EPMS and BMS systems
  • Familiarity with fire alarm and low voltage systems
  • Must be able to establish and maintain close working relationships with
  • Management, colleagues, team members, internal and external stakeholders
95

Senior Electrical Commissioning Engineer Resume Examples & Samples

  • Perform complex aspects of commissioning of electrical power distribution systems
  • Lead large projects requiring specialized skills and experience in all areas of building/data center design, operation, and maintenance
  • Instrumental in developing advanced commissioning procedures in new areas
  • May supervise other commissioning personnel on large projects
  • Develop and participate in Owners Project Requirements (OPR) process & document creation
  • Review and comment on submittal documents
  • Develop commissioning requirements/plans including commissioning project specifications
  • Track & report issues including problem solving
  • Develop and participate in Integrated Systems Tests (IST)
  • Develop and/or review Systems Manuals
  • Write and assemble final commissioning reports
  • Represent the company as a lecturer on technical topics
  • Play a key role in the commissioning team
  • Perform as lead on all phases of a commissioning project for the commissioning team
  • Be responsible for commissioning team communications and updates
  • Set project schedules and insure that they are met
  • Combine subcontractor commissioning documents with ERS documents and present as a unified report
  • Maintain strong client relationships
  • Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing
  • Actively involved in client interface and business development activities
  • Mentor other Commissioning Engineers
  • Train and assist other Commissioning Engineers in the Company or Region
  • Customer Focus – Is dedicated to meeting the expectations and requirements of internal and external customer; Gets first-hand customer information and uses it for improvements in products and services; Acts with customers in mind; Establishes and maintains effective relationships with customers and gains their trust and respect
  • Problem Solving – Uses rigorous logic and methods to solve difficult problems with effective solutions; probes all fruitful sources for answers; can see hidden problems; is excellent at honest analysis; looks beyond the obvious and doesn't stop at first answers
  • Teamwork – Functions well in a lead role on a complex and technical project team. Guides other team members and commissioning subcontractors to a successful completion. Respects and acknowledges input from all team members. Able to mediate through projects conflicts and provide positive solutions
  • Graduate BSEE/BSEET Engineer and five years same or similar work experience. At least (10) commissioning projects including Design, Construction, and Post-Occupancy phase processes. OR Graduate of applicable Commissioning Technical Training and two years minimum same or similar work experience. At least (15) commissioning projects including Design, Construction, and Post-Occupancy phase processes. OR High school education or equivalent and five years minimum same or similar work experience. At least (20) commissioning projects including Design, Construction, and Post-Occupancy phase processes
  • Knowledge of ASHRAE commissioning industry standards. Commissioning certification, such as from the Building Commissioning Association, University of Wisconsin or similar is required
  • Knowledge of the Leadership in Energy and Environmental Design (LEED) process for New Construction and Existing Buildings. LEED Accredited Professional is required
  • Knowledge and theoretical understanding of building electrical systems, including normal and emergency power distribution systems, critical power systems, generators, UPS’s and batteries, monitoring and alarm systems, automatic transfer switches, metering, motor control centers, and interlocks
  • Background and experience in operation and maintenance of all types of switchgear through the 15KV class
  • Requires special skills in a majority of the following: Complex data center surveys/audits, knowledge of mechanical and controls systems
  • Complete projects consistently on budget
  • Requires a high degree of communication, supervisory, and organization skills
  • Able to write detailed reports, using a computer, and accurately process job billing
  • Performs well as part of a team of various groups and disciplines
  • Good judgment, dependable, performs on projects with technical expertise
  • Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds, and occasionally lift and/or move 100 pound test sets
96

Senior Electrical Maintenance Outage Scheduler Resume Examples & Samples

  • Coordinate, Develop and Update Discipline Schedules to ensure an accurate product for use in effective planning, resource allocation, parts acquisition, and schedule execution
  • Develop detailed, accurate and usable schedules and reports to provide effective management tools for execution and feedback
  • Attend scheduling meetings to ensure pre-planning, implementation, schedule critiques are effective in developing continuous product improvement
  • Function as backup FLS for the Department during high workload times, vacation periods, and outages
  • Assist in the development of work windows and contingency plans, by working with Work Week Managers, Project Managers and Cycle Schedulers
97

Senior Electrical & Instrument Engineer Resume Examples & Samples

  • Manage and perform various aspects of electrical schematic drawing, electrical cabling and wiring, electrical grounding drawing, control schematic drawing, instrument wiring diagram, instrument hook up drawing, cable/cable tray design, equipment and panels layout design, etc
  • Conduct electrical and instrument detail design work and related fabrication cost estimation for various packaged equipment and skids
  • Conduct electrical panel and instrument trip/analyzer panel design and vendor factory inspection and equipment test
  • Quality control and supervision for all assigned equipment and skid fabrication
  • Maintain and improve product electrical and instrument design for Asia Manufacturing fabricated packaged equipment and skids
  • Maintain and improve assigned product work on electrical and instrument area for all Asia Manufacturing Engineering and Design scope
  • Provide technical support and commission support as requested
  • Be familiar with APCI electrical and instrument/control engineering standard, specification and international industry electrical and instrument/control engineering standard/code and local standard/code
  • Coordinate and communicate technical issues among various groups, including US, Europe, LDI, construction and vendor
  • Support project proposal estimation, project execution, fabrication QA/QC, commissioning and start up. Initiate electrical and instrument design changes as necessary
  • Any other duties as assigned
  • Job Incumbent is expected to have Bachelor’s Degree in Instrument/Control Engineering
  • Job Incumbent is expected to be fluent in oral and written English
  • Job Incumbent is expected to work in a team environment
  • Job Incumbent is expected to prepare electrical and instrument related technical documents, drawings, specification and cost estimation, either by in-house design or reviewing contractor’s design deliverables
  • Job Incumbent is expected to be skillful in drawing, calculation and design with AutoCAD, MicroStation, SP3D and have experience on Intools design
  • Job Incumbent is expected to be able to travel to site and vendor shop as required
  • Job Incumbent is expected to well understand China local electrical and Instrument/Control engineering design code and be familiar with international industry standards and codes
98

Senior Electrical Services Specialist Resume Examples & Samples

  • AVO, NETA, and NICET certifications preferred. Electrician or Electrical Contractor licenses a plus
  • HS diploma or equivalent required. Specialized skill training/certification may be required
  • Successfully demonstrates leading-edge or extensive knowledge in a technical or specialty area
  • 50% travel required
  • Individual must possess a valid Driver's license in good standing and must be at least 21 years of age in order to participate in the required Siemens vehicle plan
99

Senior Electrical Integration Engineer Resume Examples & Samples

  • Electrical Integration – For launch vehicles, aircraft, satellites, and/or payloads
  • Avionics Systems – Integration for launch vehicles, aircraft, satellites, or payloads
  • DC Power Systems – Design and integration for launch vehicles, aircraft, satellites, or payloads