Electrical Apprentice Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical apprentice job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

O Ebert

Oswaldo

Ebert

1641 Mikayla Parkways

Phoenix

+1 (555) 732 9720

1641 Mikayla Parkways

Phoenix

Phone

p +1 (555) 732 9720

Experience Experience

Philadelphia, PA

Electrical Apprentice

Philadelphia, PA

Ferry Group

Philadelphia, PA

Electrical Apprentice

Measuring, cutting, and bending wire and conduit, using measuring instruments and hand tools
Assisting with troubleshooting electrical components, wiring diagrams, transformers, motors, panels, and circuit
Tracing out short circuits in wiring, using test meter
Connect wiring to circuit breakers, transformers, lighting fixtures, thermostats, intercoms, signaling systems, power equipment, or other components
3 Completes fault finding on packaging and manufacturing equipment
Constructing controllers and panels, using power drills, drill presses, taps, saws and punches
Examining electrical units for loose connections and broken insulation and tighten connections, using hand tools

Houston, TX

Electrical Pre-apprentice

Houston, TX

Cremin LLC

Houston, TX

Electrical Pre-apprentice

All other duties as assigned
All team members are expected to be in alignment with and contribute to the Mortenson Construction values and ethical standards as stated in the Mortenson Code of Ethics and Business Conduct
All team members are responsible to understand and abide by the procedures and practices outlined in the Mortenson Operations Manual
All team members are expected to demonstrate the following characteristics
Cooperate with others when in a team environment
Accept direction from supervisors
Follow work rules and procedures

present

San Francisco, CA

Electrical Pre-apprentice Ibew

San Francisco, CA

Denesik-Franecki

present

San Francisco, CA

Electrical Pre-apprentice Ibew

present

Measures, cuts, and bends wire and conduit utilizing various hand tools
Safely utilizing hand and power tools after proper training (Drills, Crimpers, Cutters, etc.)
Lifts, positions, and fastens objects
Preparation, handling, and supplying of materials and tools be used by electrical trades
Maintaining a clean and organized work area, tools, and equipment
Works closely according to detailed instructions
Works under immediate and close supervision according to standard instructions and established procedures

Education Education

Bachelor’s Degree in Manual Dexterity

Clark Atlanta University

Bachelor’s Degree in Manual Dexterity

Skills Skills

Working knowledge of job site safety as well as ability to complete a company specific safety orientation
Responsible for applicable QEMS policies, procedures & work instructions
Short-term disability
High standard of integrity and professionalism
401(k) profit-sharing savings plan
Perform other reasonable duties as assigned
Good organizational and communication skills
Ability to work well under the supervision of a Journeyman Electrician following electrical code manuals
Written and oral communications applicable to standards set by organization
Experience working with hand tools, power tool and electronic test equipment

Create a Resume in Minutes

15 Electrical Apprentice resume templates

Read our complete resume writing guides

Electrical Apprentice Resume Examples & Samples

Complete tasks and assignments within the trade under the direction of a Journeyman or independently to maintain equipment and building
Complete theoretical training as per government regulation and pass required exams
Be familiar and comply with Massiv Die-Form's Apprenticeship Program Policy & Procedures Guideline
Assist in seasonal facilities work as requested
Perform other reasonable duties as assigned
Responsible to carry out duties for Health, Safety, and Environment in accordance with the HS&E Agreement for Employees - Addendum
Grade 12 education required (proof must be provided at time of application)
Post-Secondary education in Electrical Engineering Technology an asset
Fulfill requirements of apprenticeship contract as per Ministry of Education and Training guidelines
Good organizational and communication skills
Mechanical aptitude
Crane/Forklift experience an asset

Electrical Apprentice Resume Examples & Samples

Demonstrate an understanding of occupation-specific safety standards and procedures
Plan layout of electrical wiring, equipment, and fixtures consistent with specifications and local codes
Diagnose and repair or replace malfunctioning apparatus and components, such as transformers, circuit breakers, fuses, motors, generators, and fixtures
Understand & demonstrate use of the principles of electricity, electronics and control systems
Perform PLC and control system troubleshooting and repair
Maintain area, tools and equipment in a clean, safe and proper manner
Must possess a High School Diploma / GED
2 year post high school degree or equivalent work experience
Must be flexible to work all shifts
Must be available to work weekends, holidays and overtime
Must be able to read, write and comprehend English
Must possess ability to read and interpret blueprints and drawings
Must possess an understanding of mechanics and mechanisms
Must possess an understanding of electricity
Must possess basic math skills
Maintain all minimum employment requirements
Understanding of programmable controllers
Understanding of analog circuits, i.e. 4-20 ma or 0-10 volts
Successful completion of a 2-year post high school technical vocational curriculum (certificate or diploma received) with a concentrated focus in: industrial electricity, Servo motion control, Instrumentation, computer and logic programming,
In lieu of successfully completing a 2-year post high school technical vocational program in one of the above noted fields, possess relevant military experience
In lieu of successfully completing a 2-year post high school technical vocational program in one of the above noted fields, successful completion of a 2-year Associates Degree in an engineering field of study, e.g., mechanical engineering or electrical engineering
Pass written electrical screening test
Experience within a Food manufacturing / manufacturing environment is preferred
Experience with Safe Quality Food (SQF) practices is preferred
The Electrical apprentice will follow the guidelines and requirements of the West Hershey apprentice program agreement
Upon successfully completion of required training and passing the written and hands-on tests, the Electrical apprentice will progress to a Skill level 2 Electrical

Apprentice Electrical Technician Resume Examples & Samples

Ability to work in all types of weather extremes
Must be able to lift 100 pounds a minimum of one time a day
Certified journey-level Electrician and/or military certification or equivalent work experience
Internal PG&E Employees: Must have qualified on the Physical Test Battery (PTB), Industrial Skills Test (IST), Work Orientation Inventory Test (WOI), and Electrical Technician Test (ETT) exams prior to interviewing
External and Hiring Hall Candidates: Must qualify on the Physical Test Battery (PTB), Industrial Skills Test (IST), Work Orientation Inventory Test (WOI), and Electrical Technician Test (ETT) exams prior to interviewing
2+ years’ experience testing protective relay equipment in a power station or high voltage substation
Pack and move from ground, trucks, or platforms; lift, carry, and install various tools, parts, and equipment weighing up to 100 pounds on mountainous terrain, dams, canals, stairways, and ladders
Use various safety equipment such as head, eye, ear, foot and hand protection, as well as fall protection equipment
Maneuver frequently on stairs and ladders, over rock, gravel, concrete, metal grating, scaffolding and wood; which may include narrow and uneven surfaces; possibility of ice, oil, and/or water on surfaces
Operate a company vehicle
Must work safely at all times as defined by PG&E’s safety standards and procedures

Electrical Technician / Apprentice Resume Examples & Samples

Good numerical/maths skills
Some understanding of electrical principals, coupled with a desire to progress in electrical knowledge
The ability to manage own time and ability to prioritise at busy times
Awareness of safety at work
A desire to work in an applications and project engineering environment (as distinct from product design)
The ability to communicate clearly both verbally and in the production of good quality written work using MS office applications
The ability to produce neat and accurate technical drawings
The ability to think in a methodical way to design, plan and organise projects
Good powers of observation; specifically of physical arrangements and construction practises
The possession of a valid UK driving licence is an advantage, as is a willingness to travel and work for limited periods elsewhere within the UK (and on occasion overseas)

Apprentice Test Technician Electrical Resume Examples & Samples

Testing of wind turbine blades, pitch bearings and sub-assemblies
Health and safety awareness, including risk assessments and safe working procedures
5s regime & workshop cleanliness
Use of tensioners & torque devices as well as daily checking and use of various pieces of plant equipment
Assembly and maintenance of test rigs and fixtures
Installation of test specimens onto rigs
Assembly of test fittings, clamps etc.
Assembly and commissioning of hydraulic control devices (rams, winches etc...)
Maintenance and repair of hydraulic power packs
Fault finding and repair of hydraulic circuit installations
Rigging, banks man and crane operator for heavy lifting operations
Preparing and maintaining work instructions and operating procedures
Strain Gauging & Wiring
Identification, Assembly and connection of various other measurement transducers
Function testing of measuring equipment
Design and installation of electrical safety systems
Connection and setup of hydraulic controller and data logging devices
Fault finding and repairs / improvements to data wiring and measurement systems
Maintenance of Computers and network devices
Commissioning and day to day running of tests
Preparing and maintaining electrical wiring diagrams and schedules
Setup and Maintenance of internal networks
Setup and programming of Data logging equipment, setup and programming of hydraulic controller
Operation of supplier software for various measurement tasks
Excel and Word skills - Data processing in Excel; report writing in MS Word
Potential to learn various scripting languages including VB, ruby, XML
The right candidate will have an aptitude for engineering work, and have as a minimum 5 GCSE’s at grade C or higher (or equivalent) including Maths, English and Science
You might also have a keen interest in IT software as well; this can be useful and help develop further in some areas

Electrical Apprentice Wakefield Resume Examples & Samples

A person willing to learn and actively develop their knowledge, skills and experience to complete electrical qualifications. This person will develop onsite experience through assisting and learning from Electricians and Electrical Supervisors. This will include learning about Electrical installations, design, repair and maintenance work
Be actively involved in the learning, personal development and apprenticeship training
To assist in maintenance repairs and installation of electrical systems on a full range properties
To assist with repairs and maintenance on a full range of electrical systems, including fire alarms, call systems etc
To assist with the installation of new and refurbished electrical systems using a full range of installation materials and techniques
To assist with routine checking and testing of all types of electrical systems, including the location and repair of faults
Ensure that standards and quality of work produced is in accordance with best practice and fit for purpose
To be willing to learn to interpret design drawings, electrical circuit diagrams, manufacturers specifications and instructions
Seek service improvements to meet the needs of internal and external customers when possible
To be willing to learn to ensure all works conform to the requirements of National Inspection Council for Electrical Installation and Contracting (NICEIC) and Security Systems and Alarms Inspection Board (SSAIB) helping to complete all appropriate documentation and test certificates
Any other duties which may from time to time reasonably be required within the general level of responsibility of the post
At least 5 GCSE’s A* - C including English, Maths and Science
Polite manner
Ability to prioritise and multi task
Ability to prioritise own responsibilities
Works efficiently and accurately
Professional, proficient and proactive in approach
Likes to work as part of a team
Enjoys and is able to work calmly under pressure
Ability to anticipate potential issues and plan accordingly
Demonstrates own initiative
Organised
Flexible in approach
Motivated
Presentable and professional at all times

Instrument & Electrical Apprentice Resume Examples & Samples

Maintaining and repairing all types of instrument systems
Troubleshooting, diagnosing, and replacing defective components on instrumentation
Reading electrical, logic, and loop diagrams
Electronic troubleshooting and repair skills
Procedure use - this includes field use, review, revision, and development of procedures
Must be 18 years or older on or before your start date
Must have a current, valid US driver's license or the ability to obtain prior to your start date
Ability to work in a safe manner. Safety is a top priority at Dow. Every individual at Dow is expected to make safety a priority
Desire to learn and develop technical skills to stay current with changing operations
Effective written and verbal communication skills, as well as strong reading comprehension and listening skills
Effective interpersonal skills
Effective multi-tasking, problem solving and time management skills
Ability to prioritize and coordinate multiple tasks with competing priorities
Effective initiative, teamwork, and technical capabilities

Electrical Apprentice Resume Examples & Samples

2 Records stock of electrical spares
3 Requisitions spares and equipment from outside suppliers
4 Ensures that surroundings and equipment are clean in accordance with G.M.P standards
5 Performs tasks as delegated to him
Contributes to efficiency of other departments
1 Ensures electrical setting and adjusts machines when necessary
2 Consults with Department Managers regarding machine problems
3 Completes fault finding on packaging and manufacturing equipment
4 Performs tasks as detailed on the planned maintenance system
5 Attends meetings in different value streams
6 Completes logbooks and various other training programs supplied by GSK

Electrical Apprentice Resume Examples & Samples

High school diploma or equivalent (GED) required
Current and valid Alaska State Fitness Card required
Employee to provide his/her own tools required

Electrical Apprentice nd Year-locals Resume Examples & Samples

Proficiently identify and work with various material components
Read and comprehend drawings and specifications
Proficient tool usage, both personal (personal tools minimum listed below) and supplied

Electrical Apprentice Resume Examples & Samples

Install, maintain and repair installed existing equipment and related AC and DC existing branch circuits and feeders including "but not limited to" low voltage control circuits, motors, transformers, and electrical distribution panels
Determines general condition of all electrical equipment, be able to troubleshoot electrical malfunctions and determine extent of necessary repairs
Work with and understand blueprints, electrical schematics and job specifications as it applies to your craft
Ability to determining and clearly identify proper materials and material quantities for new and existing repair projects
Must display strong communication
Must sign the Company Code of Ethics
Ability to pass a thorough

Electrical Fitter Apprentice Resume Examples & Samples

Assemble original/refurbished specialist vehicles and equipment complete to customer’s specification as outlined in the customer’s order
Work must be of a very high standard and quality in accordance with ISO 9001, ensuring vehicle reliability and appearance is maximised
Ensure the Quality Control documentation (VQD) has been signed and completed in the correct manner
Provide technical support to those employees who have limited product knowledge
Ability to work independently as well as contributing to a successful team and collective ownership of the vehicle throughout the assembly process
Flexible attitude towards working on a variety of products
Comply with all relevant Health, Safety and Environment regulations and exercise a Duty of Care promoting a positive approach towards workplace health and safety

Electrical Apprentice Rd Resume Examples & Samples

Work closely with the electrical team
Respond to health and, safety or environmental hazards by correcting them immediately if possible, or by advising the appropriate site personnel of these hazards
On a routine basis, inspect electrical equipment, confirm correct operation, and take remedial action if necessary
Respond to the electrical needs of other team members regarding site operation of electrical equipment
Maintain a clean, safe work environment and report all incidents/accidents
Applicant must have successfully completed 2nd year (or higher) electrical courses to ITA standards
Past experience in an industrial environment would be an asset
Process Experience
Demonstrated evidence of electrical trouble shooting experience
Must have a class 5 driver’s license
Excellent health, safety and environmental record
Good interpersonal skills and a demonstrated ability to work in a team environment
Ensures that after completion of a job, the job site or shop is left clean
Quality workmanship
Willingness to learn
Must be willing to work shift
Must be wiling to work at heights
Be in good physical shape and capable of completing all tasks which require the ability to lift heavy objects

Apprentice Engineer, Electrical Co-op Resume Examples & Samples

Assisting in the development of climate control hardware
Wiring circuit boards
Testing circuits and conducting technical reports
Networking alongside software engineers
Conducting waveform checks and temperature tests

Electrical Maintenance Apprentice Resume Examples & Samples

Assisting in Low Voltage Installations, Maintenance and Repair
Assisting in the Testing and Commissioning of Electrical Systems
Assisting in dealing with Electrical Breakdowns & Fault Diagnostics
Assisting in Planned Preventive Maintenance to Equipment & Site Assets
Assisting in Reactive Works i.e. Lamp Changing,,
Assisting in Minor Mechanical & Fabric Repairs

Electrical Pre-apprentice Resume Examples & Samples

Safely utilizing hand and power tools after proper training (Drills, Crimpers, Cutters, etc.)
Lifts, positions, and fastens objects
Preparation, handling, and supplying of materials and tools be used by electrical trades
Works closely according to detailed instructions
Works under immediate and close supervision according to standard instructions and established procedures
Ability to work with equipment and machinery, such as: vibrators, pumps, drills and jackhammers, forklifts, skid loaders and power buggy’s
Positive attitude and professional customer service skills
Adaptive, effective communication and active listening skills
Experience in construction preferred but not required
All team members are expected to be in alignment with and contribute to the Mortenson Construction values and ethical standards as stated in the Mortenson Code of Ethics and Business Conduct
All team members are responsible for supporting an inclusive work environment and all affirmative action and employment related goals and requirements
All team members are expected to demonstrate the following characteristics

Electrical Apprentice Needed for Summer Project Resume Examples & Samples

Helping install lighting fixtures and wiring and conduit such as: EMT, O-CAL, Rigid conduit, MC cable, strut, cable trays
Helping to install, maintain, and repair electrical systems such as: electrical panels, lighting, and power
Tracing out short circuits in wiring, using test meter

Electrical Apprentice Resume Examples & Samples

Reading blueprints
Bending Conduit
Pulling wire
Running cable trays
Installing panels
Installing J boxes
Wiring switches/outlets
Light fixtures

Apprentice Electrical Engineer Resume Examples & Samples

Responsible for the delivery of planned, preventative maintenance to HVAC, fire alarms, air handling units, mains switch gear, lighting and BMS systems
Maintain accurate site records and documentations
Work within the SLA and KPI’s for breakdowns and repairs and adhere to Health & Safety policies at all times
Perform duties as directed in relation to fabric and basic mechanical maintenance

Apprentice Mechanical / Electrical Engineer Resume Examples & Samples

Assemble, install and dismantle mechanical plant and equipment which will include pumps, valves, gearboxes, pipework, to agreed specifications
Carry out planned, unplanned and preventative maintenance procedures on mechanical plant and equipment
Replace, repair and/or remove components in mechanical plant and equipment and ensure its return to operational condition
Diagnose and determine the cause of faults in mechanical plant and equipment

Electrical Pre-apprentice Ibew Resume Examples & Samples

All other duties as assigned
May require ability to read and interpret documents such as safety regulations, operation and maintenance instructions, blueprints and schematic drawings, and procedure manuals
Ability to work with tools such as, power and non-powered hand tools
Open to change based on diverse input and feedback
Effectively work with those of diverse backgrounds and organizational levels
Strong cross-cultural relationship building and influencing at all organizational levels
All team members are responsible to understand and abide by the procedures and practices outlined in the Mortenson Operations Manual
Cooperate with others when in a team environment

Electrical Instrumentation Apprentice Resume Examples & Samples

Comply with site Environmental, Health and Safety policies and strive to maintain an accident free environment
Ensure documentation of maintenance activities to current GxP standards both in paper based records and the BMRAM system
Maintaining the physical condition and environment of all areas
Provide Electrical/ Instrumentation/Calibration support to Facilities, Quality Assurance Team, Engineering, Operations or any other area as required
Support continuous improvement, 5S and Lean initiatives
Complete phase based training, both on and off site as per SOLAS Electrical Instrumentation apprenticeship training programme curriculum
Promotes quality and customer service
Follows current good manufacturing practices (cGMPs)
Installation, testing and troubleshoot site electrical systems, PLC’s, PAT testing and carry out assigned electrical duties
Complete both scheduled and unscheduled Electrical and Calibration maintenance activities
Work on automated control systems and with low voltages
Loop checking, tuning, troubleshooting, and start-up of instrumentation
Calibration of various types of instrumentation including temperature, pressure, level, flow and analytical instruments or others as required
Contribute to the development of the apprenticeship programme at Regeneron
Carry out electrical, instrumentation and calibration duties across all facilities areas, HVAC and utilities

Electrical Craft Apprentice Resume Examples & Samples

Studying towards Electrical Engineering and NVQ 3 Installation and commissioning over a three year period
Commitment to attend college for block release / day release training
Practical experience within GKN’s engineering department / service department
Work at different locations across site for short durations
Carry out minor planned preventative (PPM) work including checking, testing and information gathering
Carry out individual technical administration by the completion of works dockets
To be prepared to work in confined spaces, work at heights, and have the ability to use engineering and building tools or undertake training as necessary
To follow the WED / Engineering procedures with respect to safety, security and fire policies
Comply with the Company’s Health and Safety legislation and policies

Apprentice Electrical & Instrumentation Technician Resume Examples & Samples

Provide support to the on-site maintenance and engineering personnel in daily routine and non-routine tasks
Operate and maintain electrical systems such as electrical distribution networks, emergency standby equipment, utilities and HVAC
Opportunity to provide technical support to various cross functional teams throughout the site
Responsible for providing support to all electrical and calibration/instrumentation equipment so they remain operational, available for use and ensure it is GxP compliant at all times
Ensure that all maintenance & calibration duties are carried out in accordance to cGMP regulations, safety considerations and site quality standards
Use of permit to work system and other on-site safety systems to control engineering activities

Download Electrical Apprentice Resume Sample as Image file