Electrical Inspector Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical inspector job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

  • Craft your perfect resume by picking job responsibilities written by professional recruiters

  • Pick from the thousands of curated job responsibilities used by the leading companies

  • Tailor your resume by selecting wording that best fits for each job you apply

CL
C Langworth
Camille
Langworth
2295 Edythe Run
Los Angeles
CA
+1 (555) 540 7002
2295 Edythe Run
Los Angeles
CA
Phone
p +1 (555) 540 7002
Experience Experience
10/2014 present
Boston, MA
ICT & S Inspector / Electrical Inspector
Boston, MA
ICT & S Inspector / Electrical Inspector
10/2014 present
Boston, MA
ICT & S Inspector / Electrical Inspector
10/2014 present
  • Inspect the work done by the contractor(s) to ascertain that work is executed in accordance with the Contract Documents and accepted practise
  • Assist Site ICT&S Engineer/RE in the supervision of the works to ensure compliance with the contract documents
  • Assist/support the site team and the respective RE with the implementation of quality management systems
  • Analyse current methods of site supervision and provide recommendations for continuous improvement
  • Assist in the review and forward any comments on the contractor’s technical submittals to site ICT&S Engineer for the execution of the site work
  • Assist in the review and forward comments on the contractor’s method statement to site ICT&S Engineer for execution of the works
  • Monitor the progress of the work against the approved contractor programme of works
06/2009 07/2014
Dallas, TX
Electrical Inspector, Riyadh
Dallas, TX
Electrical Inspector, Riyadh
06/2009 07/2014
Dallas, TX
Electrical Inspector, Riyadh
06/2009 07/2014
  • Maintain records of materials tests performed and executed works
  • Prepare daily report to the RE or ARE. This includes works orders, materials delivery, and daily inspections program
  • Co-ordinate and co-operate with client project manager during their site inspections in the presence of the RE or ARE
  • Monitor the start-up, commissioning and handover of the site works. Including maintaining records of the project milestones
  • Where site problems are found, work with the RE or ARE to resolve them promptly
  • Audit inspections for conformity to contract documents and contractor submitted plans
  • Apply and implement all quality controls and quality procedures of the site
01/2002 01/2009
San Francisco, CA
Electrical Inspector
San Francisco, CA
Electrical Inspector
01/2002 01/2009
San Francisco, CA
Electrical Inspector
01/2002 01/2009
  • Monitor contractor’s work for conformance with the contract plans and Specifications, approved shop drawings and approved work plans
  • Auditing of field work by subcontractors, performance of specific inspections and tests, and audit report preparation
  • Executes in-house surveillance inspection and follow up
  • Compiling weekly quality reports for site work
  • Working knowledge of inspection equipment
  • Perform field inspections, surveillance and audits of field electrical installations
  • Reporting of all problems in connection with the civil works to the Resident Engineer
Education Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
Strayer University
Bachelor’s Degree in Engineering
Skills Skills
  • 1) Good communication and customer service skills and the ability to work as part of a team and/or independently and the ability to prioritise tasks
  • Ability to meet simultaneous project deadlines; ability to maintain accurate and easily accessible records
  • C Comprehensive knowledge of applicable sections of the LANL Engineering Standards Manual and Specifications
  • 1) Knowledge of the Education Sector and Knowledge of Building energy Management Systems (BeMS) – i.e. Trend/Doorway
  • Act as the primary source of field Quality Assurance, and monitor the Contractors Quality Control processes and QC Inspection reporting and corrective actions
  • Ability to set priorities in an efficient and timely manner to meet essential job functions and provide attention to detail
  • Ability to interface with customers in the upmost professional manner
  • Ability to operate PC with knowledge of Microsoft Office or similar software packages such as Vista and calibration programs
  • Ability to perform basic mathematical calculations
  • Performs incoming inspections of electronic components, cables, enclosures and assemblies provided by outside vendors
Create a Resume
1

Electrical Inspector, Oman Resume Examples & Samples

  • Reviews project contract documents and monitors construction activities to ensure compliance
  • Monitors and/or evaluates electrical tests such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required. Exercises ability to interpret single-line and/or schematic electrical drawings as well as plans and specifications
  • Monitors all electrical installations to assure circuitry phasing, equipment, and grounding adhere to construction documents and National Electric Code requirements
  • Verifies equipment settings, alignment, testing and energization requirements
2

Electrical Inspector Resume Examples & Samples

  • Report to AECOM Resident Engineer
  • Monitor contractor’s work for conformance with the contract plans and Specifications, approved shop drawings and approved work plans
  • Maintain daily reports documenting work performed by the contractor. Record all work performed, including deviations from contract documents, quality of work, unforeseen conditions, unsafe conditions, etc
  • Interface with Contractors for on-site resolution of construction issues
  • Responsible for compliance with field safety and quality control
  • Assist with review of submittals, as-built drawings, RFIs, schedules, and change orders
  • Track close out items
  • Ability to work day or night shifts
  • Maintain time and material records for changes as necessary
  • Coordinate with any required special testing agencies
  • Bachelor’s degree or other technical degree or certificate in electrical design/inspection
  • Experience working/coordinating with electrical utility companies
  • Experience with high voltage electrical work
3

Electrical Inspector, Abu Dhabi Resume Examples & Samples

  • Field checks installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed. Assures compliance with approved submittals
  • Monitors contractors' compliance with approved Quality Control Plane
  • Provides general inspection on all contractor and subcontractor work to assure a safe and workmanlike operation
4

Electrical Inspector Resume Examples & Samples

  • Must have a High School diploma. Engineering Degree preferred for comparable experience (electrical or mechanical bias desirable)
  • Minimum 5+ years related experience, with a background in electrical or mechanical systems
  • Field engineering/inspection skills; solid background in construction/inspection of facility electrical or mechanical systems
5

QC Electrical Inspector Resume Examples & Samples

  • Also responsible for performing quality control inspections, witnessing tests and completing appropriate documentation in the shop or field as directed by supervisor
  • The Quality Inspector will primarily have responsibility for inspections and tests pertaining to electrical
  • Inspect subordinates’ work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed
  • Develop an understanding of project scope and Quality requirements as they pertain to your specific area of responsibility
  • Study and understand the Project Quality Plan and other quality documents that pertain to assigned scope of work
  • Perform inspections and tests as required by the assigned responsibilities and as directed by supervisor
  • Prepare inspection/test reports and maintain the quality files related to area of responsibility
  • Review/approve (initial/date) all 3rd party test results for compliance with project requirements as required
  • Perform duties as directed by his/her supervisor without supervision
  • Must have atleast 3 years Electrical Inspection in a heavy industrial setting
  • Must have an associate degree in engineering technology or science plus two years of experience in a related construction field (at least one of these years in a QA/QC position); or a high school graduate or equivalent (GED) plus four years of experience in a related construction field (at least two of these years in a QA/QC position)
  • Must have working knowledge of the specific trade of discipline they are assigned to with associated special processes, inspection, and testing techniques. Must have working knowledge of construction industry codes relating to their area of expertise (i.e. ACI, AWS, ASME, NEC, etc.)
  • Certifications from AWS, ACI, ICBO, ASNT, NACE, API etc. may be required for certain positions
6

Electrical Inspector Resume Examples & Samples

  • Visually inspects electronic circuit boards, cables and assemblies
  • Performs in-process and final inspection of major components, subsystems and systems
  • Verifies that test records are correct
  • Executes in-house surveillance inspection and follow up
  • Interfaces with and assists customers’ inspectors during their source inspection of company activities
  • May interface with manufacturing, quality engineering and procurement for corrective actions and inspection criteria
  • Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices
  • Typically requires high school diploma, technical trade school training or equivalent and five or more years’ experience in electronics inspection and testing, including experience with printed circuit board assembly, cable assembly and electromechanical assembly
  • Must have strong experience in Printed Circuit Board Assembly inspection
  • Experience and knowledge of IPC 610 and IPC 620 for acceptability of electronic assemblies/cables and MIL standards for soldering and assembly requirements- certification preferred
  • Must be customer focused
  • Ability to read and interpret general engineering drawings, specifications and work instructions
  • Working knowledge of inspection equipment
  • Ability to perform basic mathematical calculations
  • Skills to maintain the flow of work within the unit
7

Electrical Inspector Resume Examples & Samples

  • Respond to contractor’s RFI & FCR
  • Responsible for review the single line diagram and detail design for the project
  • Review the installation method statement for project
  • Review shop drawing & as built drawing
  • Review operation and maintenance manual (O&M)
  • Ensure safe working at all the times and that zero accidents are maintained for all project staff
  • Supervise and inspected all electric activities
  • Supervise and inspection of Installation of cable tray, ladder, basket, GI conduit
  • Supervise and inspection of all the cables/wires pulling, laying and dressing
  • Inspection of cable termination for wires/cables
  • Supervise and inspection of fixed normal light, emergency light, track light, exit light and coordination with
  • Supervise and inspection of Panel and DBs (MSB, MCP, ATS, SSB, DB) including termination
  • Supervise and inspection all the methods of installation HV, transformers and generator
  • Supervise and inspection Installation of device for low current system (fire alarm, CCTV, access control, BMS,DPP)
  • Prepare comments for inspection request to make hand over for the project
  • Prepares the necessary records and reports of all inspection and non-compliance records (NCR)
  • Inspect on -site and off-site material which will be used in the project
  • Update material and shop drawing submittal Log Sheet
  • Compiling weekly quality reports for site work
  • Monitor the progress of work against the approved plan
  • Inspects and reports of any damage parts or equipment
  • Ensure that contractor follows environmental, safety and health programs
  • Megger testing for Panel Boards (MSB ,MCP,ATS,SSB,DB)
  • Responsible for function check for panels
  • Responsible for continuity, megger test for power cable
  • Responsible for Earth pit cables continuity test
8

ICT & S Inspector / Electrical Inspector Resume Examples & Samples

  • Assume responsibility of the inspection of ICT&S works in the project
  • Monitor performance of the contractor / sub-contractor and identify, raise any quality / workmanship concerns with the SQE / RE
  • Review quality procedures and effectively implement QA/QC plans across the project
  • Carry out, witness all tests carried out by the contractor on-site and off-site tests
  • Inspect the works, on-site material, off-site material to be used in the project
  • Technical Competencies, Essential and Fluent
  • Minimum 2-3 years previous work experience related to ICT/Security & audio visual works
  • Ability to work without excessive supervision
  • Ability for self checking & correction of work
  • Very good interpersonal skills, both in person and over the phone
  • Must have good English written and oral communication skills
  • Must work well in large teams with staff members of all backgrounds and skill levels
  • Middle East work experience preferred
9

Electrical Inspector Resume Examples & Samples

  • Participate in other related activities as directed from time to time by the Senior Electrical Inspector and/or AHJ
  • Education equivalent to an associate's degree related to electrical engineering or a journey level electrician with four years work experience in commercial and/or industrial construction
  • A valid ICC/IAEI certification for Commercial Electrical or equivalent certification with two years of experience conducting electrical inspections
  • Must have demonstrated experience in the inspection of electrical installations and modifications in accordance with code, standards and or per design of office buildings, research laboratories, building utility centers, medium & low voltage power distribution systems
  • Knowledge of electrical construction and engineering drawing details and design plan review principles applicable to power distribution, generation, controls, lighting, premises wiring, electrical equipment, overcurrent protective devices, arc-flash hazards and fault current coordination settings
  • Knowledge of applicable electrical construction and wiring methods, selection of electrical equipment including medium/low voltage switchgears, and materials for facilities constructability
  • Knowledge of applicable industry and regulatory standards, National Electrical Code (NEC), safety codes, design standards and environmental regulations pertinent to the electrical installations,
  • Must be knowledgeable on review, evaluation and enforcement of electrical and fire safety codes; industry standards; and other safety-related procedures
  • Proven electrical design plan review experience of prepared construction documents for projects involving code and specifications, medium and low voltage power distribution, raceway layout, underground duct bank, lighting, grounding, control schematics, connection diagrams, telephone, paging, fire alarm, CCTV, intercom and security access systems
  • Detail oriented and knowledgeable of inspection practices, scheduling for efficient time management, organization, planning and record-keeping skills
  • Effective writing, speaking and interpersonal communication skills necessary for the role and scope of work performed
  • Competent analytical, problem-solving and decision-making skills to make sound judgments and provide creative solutions to complex problems
  • Ability to work well under pressure and handling multiple tasks to achieve defined group and institutional goals. Must be flexible to work weekends and holidays in accordance with the planned work schedule
  • Proven experience working with internal and external contacts with the demonstrated ability to work on multiple projects with varying priorities while meeting tight deadlines
  • Use handheld device(s) and computer work station for proficient use of spreadsheet, database and word processing software programs to for data entry and report preparation and other electronic filing to satisfy project-specific inspection related requirements
  • Ability to climb ladders and perform site walk-thru, at times around hazardous systems and equipment, to investigate as built conditions for the design documents and to inspect construction, equipment, systems, and structures
  • Possession of a valid California Driver’s License
  • Bachelor’s degree in a technical/engineering relate discipline
  • Knowledge of specific DOE/National Lab or UC facilities type building systems, electrical safety processes and procedures; NFPA 70E, OSHA
  • Knowledge of DOE Orders, IEEE standards and or other NFPA related electrical and fire safety codes
10

Roving Electrical Inspector Resume Examples & Samples

  • Inspect construction work, primarily electrical for conformance with contract plans, specifications, codes, and regulations
  • Responsible for executing construction quality assurance in accordance with Quality Management protocol and project requirements
  • Responsible for photo documentation of project site conditions and construction progress, daily report documentation of construction activities, and construction access coordination
  • Assist with notices to comply, construction cost estimates, change order evaluations, submittal reviews, and coordination with building maintenance personnel
  • Effectively communicate and work collaboratively with Client and Contractor/Subcontractors in assuring work conforms with the contract and act proactively to resolve problems as required
  • A minimum of 4 years of field quality control/quality assurance or project engineering experience in electrical construction is required
  • Proficient in computer use, Microsoft Office Suite, and Adobe Pro
11

Electrical Inspector Resume Examples & Samples

  • Five (5) years experience at the Journeyman Electrician or higher level (Foreman, etc.), or related skilled craft or trade
  • Working knowledge of current National Electrical Code (knowledge may be acquired during probationary period); verbal facility; tact and diplomacy; ability to gather and evaluate facts; and a demeanor that generates confidence, respect and trust
  • Possess a valid Louisiana driver's license and maintain a healthy driving record
  • Successfully complete an acceptable job related certification within one year of employment or within period as extended by Director of Public Works subject to the availability of training. Current employees within three (3) years after the training is first offered subsequent to adoption of these class specification amendments. All time requirements of these class specification amendments may be extended by the Director of Public Works as individual circumstances warrant
  • High school graduate or GED equivalent
  • Ability to read and interpret plans and specifications
  • Less than 5 years experience
  • 5-7 years experience
  • 7-9 years experience
  • More than 9 years experience
  • Required Question
12

Electrical Inspector Resume Examples & Samples

  • 1) A High School Diploma. Proof of graduation (Original High School Diploma or G.E.D. Certificate issued by the State Department of Education) must be submitted at the time of application
  • 2) Possession of a valid Louisiana Driver's License. Driver's license must be presented at time of application
  • Yes, less than two years
  • Yes, between two and four years
  • Yes, between four and six years
  • Yes, more than six years
13

Mechanical / Electrical Inspector Resume Examples & Samples

  • Possess technical competence, skill and knowledge of the construction industry
  • Understand Contract Documents including Drawings, Specifications and Contracts and provide technical assistance and recommendations for action
  • Conduct efficient Meetings, prepare and distribute Meeting Minutes
  • Conduct necessary Field Investigations, provide Field Inspections, prepare concise and distribute timely associated Reports
  • Receive, review, coordinate, track and process RFI's
  • Provide Schedule review and monitoring including suggestions for changes
  • Prepare Change Order packages including preparing an independent estimate with final recommendations
  • Provide knowledgeable review of contractor Pay Application and provide recommendations with associated paperwork
  • Demonstrate the ability to make decisions and provide recommendations
  • Possess a working knowledge of Safety procedures, practices and standards
  • Communicate effecting in speaking and writing, including listening
  • Build relationships and create teamwork within the company, and the project team
  • Bachelors of Science in Engineering, Construction Management, Architecture or equivalent experience is required
  • Certificate in discipline field is preferred
  • Strong computer software skills within the Microsoft Suite of tools (specifically Excel, Word, Outlook) and Adobe Acrobat is required
  • Entry Level, no experience is required, some is preferred
  • Knowledge of general photography preferred
14

Senior Electrical Inspector Resume Examples & Samples

  • The Electrical Inspector will work with Bloom’s in house field application engineers (FAEs) and Design team to review customer switchgear for the feasibility of interconnection of Bloom energy servers to the customer facility
  • Provide key interaction with local municipalities and Local utility companies for code compliance, component specifications, and site design
  • Ability to perform job-site electrical review of site plans prior to construction. This includes customer’s current switchgear ratings and potential electrical tie-in points. Ensuring Bloom switchgear is compatible with existing infrastructure on site
  • Constant review Bloom switchgear cut sheets for fit, form and function; including breaker sizing, conduit sizing, trip ratings, and interconnection points. To ensure specifications for electrical switchgear is accurate
  • Provide direct feedback through proper channels to the Bloom FAE and Design team for any inconsistencies noted in construction plans prior to construction starts
  • This position may sometimes act in a support function similar to a construction site superintendent or installations technologist. Reviewing sites for quality and completeness during and upon completion of construction
  • Possesses the ability to safely open live indoor or outdoor switchgear and take notes about available tap locations and bus design
  • Ability to act as a working, consulting or supervising electrician during the installation of Bloom energy servers
  • Must have previous experience with one or more of the following: Utility Company, a certifying agency or AHJ as an inspector
  • Highly experienced with power levels typically in the range of 200kW to 2MW but sometimes higher
  • Knowledge of all applicable codes: NEC, OSHA, NFPA 70, etc
  • Experience in retrofit and new construction
  • Ability to positively identify wire colors by sight
  • Troubleshooting: must be able to find the root cause of issues and think logically about solutions
  • Customer Service: must be friendly when working on site
  • Critical Thinking: when diagnosing problems, must think critically in the process of repairing the issue
  • Expert ability to use an array of tools and diagnostic devices to review and install electrical parts
  • Expert ability to read and understand 2-D drawings
  • Experience with Microsoft Office tools
  • Highly motivated and a self-starter, able to work with little supervision
  • Ability to work on weekends, at night and holidays
  • 8+ years of experience as an electrician. Utility or switchgear application environments highly desirable
  • Highly desired for candidate to have Certification or license within the state of California where the position is located
  • Highly desired for candidate to hold a current License, including continuing education
  • Trained and qualified to use appropriate PPE when necessary (i.e. ARC flash trained and experienced)
  • High School graduate or GED, some college or technical schooling preferred
  • Valid driver license in good standing
  • Military MOS code in an electrical field desirable (i.e. Navy NEC CE-5635 Advanced Construction Electrician)
15

Electrical Inspector Resume Examples & Samples

  • The inspectors prior to inspecting areas of work are to familiarise themselves with the Material Approval Sheets (MAS) and to ensure that the correct Material has been employed and especially if there are particular manufacturers method of applications (Manufacturer Method Statements) sample of materials are also to be requested
  • To facilitate the standards of installation the inspectors should request sample installation/work to be taken as an example and be shown to all tradesmen to set standards
  • If the materials are subject to site testing ensure that the test are carried out in the presence of the inspectors and test sheets are submitted for record and later insertion into the operating and maintenance manuals
  • The inspectors shall monitor the progress of the site taking into consideration the site construction programmes. Any deviation from the target/milestone dates are to be communicated to the Resident Engineer for further action
  • It is the inspector’s duty to be amongst the inspectors to ensure that the site progress is not being held by any of the trades involved on the project
  • It is imperative that Technical Queries raised in writing by the contractors are answered as a quick turnover issue and if not answered by site and require design office input these are to be monitored
  • Technical Queries are to be discussed amongst the trade inspectors to ensure that no input reply is required from other trades inspectors or joint replies prior to issuing
  • The inspectors are to make themselves familiar with the Document control quality system in use in WSA and to keep monitored together with the site Document Controller (If present on site)
  • Any further explanations to the above document can be discussed directly with the Head of Sites Coordinator Mr. Daniel Bonadonna on GSM 99277072
16

Electrical Inspector / Test Engineer Resume Examples & Samples

  • Inspects/witness tests for railroad and rail transit systems
  • Checks for conformance to plans and test reports
  • Prepares Daily Reports
  • Takes photographs
  • Measures and record quantities of work completed for payment computation
  • Coordinates among disciplines
  • Verify tests have been performed according to procedure
  • Experience on LIRR or MNR with design, installation or testing of systems components
17

Electrical Inspector Resume Examples & Samples

  • Create and execute inspection plans for the mechanical and electrical divisions with strong attention to detail
  • Inspect parts for quality standards and specialty items such as purchased parts for production at the receiving stage
  • Record and complete QC documentation requirements
  • Ability to train others on inspection processes and equipment when required
  • Ability to uphold reputation of the Quality Department with a positive attitude and understanding of quality’ s integrity. To protect Koontz-Wagner from any quality field issues while meeting the expectation of the customer’ s high demand of quality workmanship
  • Ability to use and read micrometers, calipers, thread gages, pin gages, height gage, optical comparator, CMM and other mechanical measuring equipment
  • Applies judgment effectively in problem solving; consults with others to make effective business decisions when necessary; utilizes broad experience and facts when decision time is limited
  • Sets rapport with cross functional teams and peers; builds trust by basing feedback on objective criteria rather than subjective judgment; always follows through on commitments, promises, agreements, and decisions
18

Electrical Inspector, Compliance Coordinator Resume Examples & Samples

  • Act as liaison to the cities of Cambridge, Boston and Somerville to oversee, manage, and coordinate the attaining of permits, scheduling of city inspections, and the compliance of projects/facilities throughout the campus so as to minimize disruption to Harvard classes, research, projects, and operations. Ensure compliance and oversee and manage any conflicts/issues/problems through resolution
  • As University designee, obtains annual electrical maintenance permits and individual construction permits for electrical work performed by Energy & Facilities (E&F) trades. Acts as a resource for all E&F electricians on interpretation of codes and regulations; coordinates permit applications for Campus Services; ensures code compliance. Issues periodic reports of maintenance work conducted
  • Work in coordination with Energy & Facilities (E&F) service units to help assure that they are meeting their compliance responsibilities. Service units include: Electrical Distribution, Elevator Services, Fire Safety Services, Maintenance Services and Plant Operations
  • Must keep current on all state and national, codes & regulations and be aware of local interpretation of same. These codes include the International Building Code (IBC), the MA State Building Code (780 CMR), the MA Comprehensive Fire Safety Code (527 CMR) and applicable National Fire Protection Association (NFPA) codes. Maintain library of code references
  • Act as the primary administrator of electrical, building and life safety system inspections for the University. The areas of inspectional responsibility include compliance related to electrical code, building code and life safety code
  • Schedule and coordinate with the Inspectional Services Departments (ISD) of Cambridge and Boston and University facilities owners for the annual inspections of University facilities. Coordinate external service providers, internal service groups and project managers to assure their roles in resolving deficiencies. Conducts independent inspections and/or accompanies outside inspectors. Distributes reports and issues timely responses to inspector’s findings to all affected parties
  • Responsible for maintaining all inspectional records and processing all fees and costs associated with inspections and permits
  • Acts as permit coordinator for all temporary or special permits related to University events. May act as a liaison with various City Offices
  • Utilizes the Energy & Facilities maintenance tracking/work management system to identify compliance needs, to track compliance related work and to generate reports
  • Interact with the State Board of Examiners on issues related to local wiring inspector decisions involving Harvard University projects and other Board matters that may affect the University. Interact with the Office of the State Fire Marshal on matters related to the Massachusetts electrical and building codes
  • Performs design reviews for any new installations or renovations proposed, may be regularly involved in field inspections of University projects
  • Provides recommendations, work proposals, quotations and cost estimates to customers, as required to apprise owners of needed additional work. Performs project management services as requested
  • Act as a support resource for the University’s efforts in execution and performance requirements of NFPA 4: Standard for Integrated Fire Protection and Life Safety System Testing
  • Performs special projects as directed
19

Electrical Inspector Resume Examples & Samples

  • C Comprehensive knowledge of applicable sections of the LANL Engineering Standards Manual and Specifications
  • Working knowledge reviewing new and upgraded facility plans, designs, and specifications to ensure compliance with the NEC and other applicable electrical codes
  • Familiarity with the LANL Electrical Safety Program, or similar DOE laboratory electrical safety programs
  • Working knowledge of office automation applications (i.e., computers, spreadsheets, database management, etc.)
  • Ability to make decisions and recommendations as a Subject Matter Expert (SME) that significantly affect the content, interpretation, and development of Laboratory electrical policies and programs
  • Trained as an Electrical Safety Officer (ESO) or equivalent DOE programs
20

Electrical Inspector Resume Examples & Samples

  • 1) Good communication and customer service skills and the ability to work as part of a team and/or independently and the ability to prioritise tasks
  • 2) Completion of a full electrical building services apprenticeship (or equivalent)
  • 3) Good IT Skills with use of Microsoft products (e.g. Excel/Word/Access)
  • 4) Certificate in electrical testing (C&G 2391 or equivalent)
  • 5) Domestic, commercial and industrial electrical installations, analogue addressable fire alarm systems, lightning protection and surge arresting systems
  • 6) Computer Aided Drawing systems (AutoCAD)
  • 7) Significant experience of working within a maintenance environment, be familiar with relevant electrical building services legislation and have the ability to read and interpret electrical schematic drawings and specifications
  • 9) Ideally the successful candidate should be able to communicate in Welsh and where necessary we will support individuals into developing these skills
  • 1) Knowledge of the Education Sector and Knowledge of Building energy Management Systems (BeMS) – i.e. Trend/Doorway
  • 2) Willingness to undertake further in-house and external training
  • 3) PAT testing qualification
21

Electrical Inspector Resume Examples & Samples

  • Be proactive and alert project management professionals to issues that may come up in the field
  • Must be able to document the work via the daily inspection report and various other reports including tracking quantities and documenting work
  • Ensure adherence to construction drawings and specifications
  • 10+ years of relevant work experience
  • Master Electrician
  • Experience with high and low voltage
  • Proficient on a laptop computer (knows MS Word MS Excel etc
  • Construction inspection experience, familiarity with all trades
22

Electrical Inspector Resume Examples & Samples

  • Uses “As-Built” plans, blueprints, and schematics in the performance of inspections
  • Examines “As-Built” plans, blueprints, and schematics to ensure compliance with required industry code(s)
  • Performs site visits during each phase of construction (initial through final) to conduct inspections
  • Follows-up as needed to perform additional inspections during each phase of construction (initial through final)
  • Inspects in-progress and completed work for quality workmanship and safety
  • Reviews materials to be used prior to the start of work
  • Signs off that all work has been satisfactorily accomplished following completion of maintenance or project activities
  • Uses the Computer Maintenance Management System (CMMS) to track and update work orders as needed
  • Certification as master tradesman preferred
  • Must possess a valid Master Electrician license from the United States
  • Must possess a driver’s license from country of origin for the purpose of obtaining a Military or Kuwait Driver’s License
  • Must possess the technical skill to identify repair requirements as it pertains to electrical equipment
  • Must have expert knowledge of equipment manuals for servicing, operations and repair of electrical systems
  • Must be an expert in corrective actions performed by maintenance teams
  • Must have the ability to troubleshoot, service and repair electrical systems
  • Must have full knowledge of electrician’s tools and test equipment
  • Must be proficient in all phases of paperwork as it pertains to servicing, maintenance, repairs, classification, etc
  • Must have expert knowledge of equipment operations as it is critical to providing a quality inspection program
  • Must be capable of giving and receiving instructions during the course of normal duties
  • Must be capable of working independently with little-or-no guidance
  • Must be willing to adapt to rapidly-changing priorities in a fast-paced work environment
23

Electrical Inspector, Riyadh Resume Examples & Samples

  • Implementation of Project Requirements by familiarizing with the project’s contract documents, detailed drawings, specifications, and health and safety measures together with any associated updates
  • Ensure the contractor/s compliance with the standards and specifications of the contract documents
  • Maintain records of the contractor human and equipment daily resources
  • Undertake all site supervision and inspections when required or instructed by the Resident Engineer (RE) or the Assistant Resident Engineer (ARE) or the Senior Discipline Engineer
  • Liaise and daily follow up with the contractor. This is to ensure the contractor is managing its resources, health and safety, and equipment needs on the site
  • Prepare daily report to the RE or ARE. This includes works orders, materials delivery, and daily inspections program
  • Follow up and implement any site instructions made by the RE and ARE
  • Apply and implement all quality controls and quality procedures of the site
  • Prepare any site measurements and surveying checks needed by the RE or ARE for pipes alignments and levels
  • Co-ordinate and co-operate with client project manager during their site inspections in the presence of the RE or ARE
  • Monitor contractor QA/QC activities and maintain relevant records
  • Assist the ARE and RE in the preparation of any correspondences in compliance with the contract documents and site requirements
  • Where site problems are found, work with the RE or ARE to resolve them promptly
  • Monitor the start-up, commissioning and handover of the site works. Including maintaining records of the project milestones
  • Maintain records of materials tests performed and executed works
  • Experience in the installation of HVAC and other plumbing systems
  • Working knowledge on basic cooling and heating load calculations, plans and details. Sizing and layout of ductwork systems and piping, central boiler and chiller design, review of shop drawings and responding to field requested changes
  • Experience in the installation electrical systems
  • Bachelors Degree Electrical Engineering or Electro-Mechanical
24

Electrical Inspector, Riyadh Resume Examples & Samples

  • Experience in the design, installation of HVAC and other mechanical / plumbing systems
  • Electrical
  • Experience in the design, installation electrical systems
  • Bachelors Degree Mechanical and Electrical Engineering or Electro-Mechanical
25

Electrical Inspector Resume Examples & Samples

  • Experience as a Journeyman level electrical mechanic
  • Experience reading and interpreting blue prints and specifications
  • Knowledge of electrical theory, practices and the electrical provisions of municipal building codes
  • Experience operating a personal computer
  • A City of Chicago Supervising Electrician License
26

Electrical Inspector Resume Examples & Samples

  • Requires a minimum of 15 years of Field Quality Assurance/Control experience Must be familiar with King County and Washington State Standards and best management practices
  • Essential Functions: Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements limited to 20 lbs. in the form of supplies, drawings, etc
  • Longest distance carried of 50 feet. Hand manipulation is required for simple grasping, pushing and pulling, and fine manipulation. Right and/or left hands utilized
  • Occasional need to reach and/or work above the shoulder for supplies, as well as below the shoulder for same
  • No foot controls necessary
  • Must be alert to equipment in the field, there will be occasional travel between sites, will work near construction job site equipment when in the field, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights
  • No exposure to tobacco smoke
27

Electrical Inspector Resume Examples & Samples

  • Inspect electrical equipment to ensure customer standards
  • Perform first piece / first article inspection
  • Perform receiving inspection on raw materials,in-process inspection on work in progress, final inspection on completed assemblies per documentation and record
  • Proficient use of inspection tools and associated technical documents including but not limited to the following: voltmeters, micrometers, hand stamp, eye loop, pedestal mounted magnifying glass or scope with light, in-process work sheets, drawings, blueprints, specifications sheets, bills of material, a variety of jigs and fixtures for examining components and assemblies and calibrated measuring rules
  • Excellent written and verbal skills to interact with people at all levels inside and outside of Ducommun
  • Knowledge of required standards, as identified in training matrix, including ISO and Mil Specs
  • Intermediate level computer proficiency including e-mail, Word, and Excel
  • Must have good documentation skills
  • Attention to detail is critical
28

Electrical Inspector Resume Examples & Samples

  • Must have good documentation skills; attention to detail is critical
  • High school diploma required; college education or business school preferred
  • Minimum 2 years of electrical inspection experience
29

Electrical Inspector Resume Examples & Samples

  • Detailed supervision and check of the Contractor’s work as directed by the Resident Engineer
  • Review and interpret plans, blueprints, site layouts, specifications, or construction methods to ensure compliance to legal requirements and safety regulations
  • Keeping a detailed and neat diary of all major activities and all important observations on site and on other places where his presence in connection with the job is required
  • Preparation of a daily report to the Resident Engineer on the contractor’s activities. The report shall be presented to the Resident Engineer at the end of each working day and normally before the Inspector leaves the construction site
  • Completion of the various forms, documenting the quality and progress of the various sections and areas of the construction work in accordance with the relevant supervision procedure
  • Reporting of all problems in connection with the civil works to the Resident Engineer
  • Deal with any other duties as may be assigned from time to time from the RE & ensure we meet HSE standards as set in accordance to company’s policy
30

Quality Assurance Electrical Inspector Resume Examples & Samples

  • Ensure compliance with the contract plans and specifications, and as delineated throughout the project specification concerning Quality Assurance Audit Plan (QAA)
  • Work in a team environment as well as independently
  • Any other duties assigned
  • Bachelors degree in a Construction Electrical related field or equivalent combination of education and experience
31

Electrical Inspector, Senior Resume Examples & Samples

  • 2-year degree in a technical discipline ( electrical) or construction-related field, or a high school diploma and equivalent work experience, is required. Also
  • Requires 10+ years of related experience on heavy construction projects, as well as formal certification from an independent organization, depending on type of inspection assignment
  • Must be able to read and interpret blueprints and construction specifications and be thoroughly familiar with construction-related processes related to area of assignment
  • Have the potential to perform in a lead capacity
32

Electrical Inspector Resume Examples & Samples

  • Maintain effective lines of communication with all company personnel responsible for the project as well as general contractors and sub-contractors
  • Properly and effectively perform electrical construction tasks as needed
  • Attend seminars regarding code changes
  • Additional duties as required
33

Electrical Inspector Resume Examples & Samples

  • Generates daily inspection report for construction activities
  • Assures that the Work conforms to Construction Documents, and initiates action to prevent, stop or correct any quality control deficiencies, defective work, or deficient QC reports
  • Conducts spot surveillance of all craft disciplines to assure high quality standards of workmanship are maintained
  • Interacts closely with the Contractors field personnel to resolve field issues
  • Ensures the development and maintenance of the As-Built drawing records
  • Generates Safe Plans of Action and Safety Observation Reports
  • Performs quantity calculations for payment purposes
  • Provides input for contract change orders, submittal responses, and RFI responses
  • Bachelor's degree in Engineering is required
  • Required to have and maintain a satisfactory driving record
  • Some knowledge of construction including material, methods, plans and specifications; associated safety requirements
  • Perform calculations using algebra, trigonometry and geometry
  • Able and willing to work day or night shifts and/or flexible schedules including weekends as required to support the project requirements
  • Personal computers and applicable programs
  • Promotes and maintains a safe working environment
34

Electrical Inspector Resume Examples & Samples

  • Auditing of field work by subcontractors, performance of specific inspections and tests, and audit report preparation
  • Receives supervision from higher level QA/QC personnel
  • Conducts materials testing and analysis, using tools and equipment and applying technical knowledge necessary to conduct tests
  • Prepares reports detailing tests conducted and results
  • Based on test results may recommend changes in materials or procedures
  • Proactively reviews contractor plans to insure the materials and procedures will pass quality testing
  • Functions as a Lead on larger projects and is responsible for directing the work of less experienced Inspectors
  • Perform field inspections, surveillance and audits of field electrical installations
  • Review documentation for completeness and accuracy
  • Interface with subcontractor Q.C. and Client Quality Representatives
  • 8+ years of experience in related field required
  • High school diploma, or equivalent required
  • Certification in at least one testing or inspection discipline required
  • Minimum of 2 years of field QA/QC experience required
  • Working knowledge in all construction disciplines; Civil, Structural, Pipe, Mechanical, and Welding required
  • Industry certification or certified training in multiple disciplines preferred
35

QC Electrical Inspector Resume Examples & Samples

  • Follow the HSE requirements applicable to work scope
  • Assist with development of project specific quality procedures
  • Assist with development of project specific inspection and test plans
  • Perform surveillance of subcontractor inspections and review of subcontractor documentation
  • Minimum of 5-10 years of electrical experience in the installation, inspection and testing of electrical systems
  • Experience with evaluation and resolution development of welding related project and code issues
  • Must have good computer and writing skills
36

Electrical Inspector, Qatar Resume Examples & Samples

  • Reporting to Senior Resident Engineer on all site related (sewage treatment plant) electrical and instrumentation matters
  • Supervision of construction of electrical and instrumentation works of a sewage treatment plant (10,000m3/day)
  • Preparation of daily report on site progress
  • Carrying out inspection of works as notified by the contractor as complete
  • Bachelor’s Degree in Electrical Engineering from an accredited university to the approval of the Engineer
37

Electrical Inspector Resume Examples & Samples

  • Self-starter, ability to work with limited supervision
  • Ability to identify electronics parts and components
  • Ability to review and interpret customer/industry specifications & workmanship standards
  • Substantial experience with Microsoft Word and Excel (required)
  • Familiar with statistical process control techniques (desired, but not necessary)
  • Ability to perform mathematical calculations for inspection verification
  • Ability to read and understand engineering drawings and specifications
  • Prior experience writing First Article Inspection Reports per SAE AS9102 (desired, but not required)
  • Ability to maintain test records
  • Ability to evaluate test results
  • Read and write English
  • Use all inspection hand tools
  • High school diploma / trade school (minimum)
  • 2 years or more of electronic quality related experience (highly desired)
  • 5 years of electronics assembly related experience (highly desired)
  • Familiar with ESD control practices and principles
  • Light manufacturing environment
  • Exposure to electrical components/equipment
  • Ability to wear Personal Protective Equipment (PPE)
  • 403 LaBarge Avenue
38

Electrical Inspector Resume Examples & Samples

  • High School diploma, college education or business school preferred
  • Minimum 2 years of electrical inspection experience preferred
  • 11616 East 51st Street
39

Electrical Inspector Resume Examples & Samples

  • Maintain safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concerns
  • Perform all duties as assigned and adhere to TEAM's Core Values of
  • Safety First – in everything we do
  • Integrity – means doing the right thing
  • Service Leadership – throughout the company
  • Ensure that work is implemented as required in the project specifications
  • Compile and submit completed inspection report in a timely manner
  • Communicate issues, questions or concerns to supervisors and implementing contractor
  • Properly interpret regulations, codes and industry standards
  • Maintain current knowledge of NEC Codes
  • Visually negotiate and properly utilize scaffolding, trenches, portable ladders, fixed ladders, metal stairways, etc
  • Use a computer to compile and submit daily reports and inspection reports, as well as for inter-office communication
  • Learn and abide by company policies and procedures
  • Properly use and complete customer and job related forms and paperwork
  • Answer Client, State and Federal Regulatory questions
  • Observe work in progress and watch for unsafe actions as well as quality issues
  • Communicate progress, results, issues or concerns on a daily basis in a Daily Activities Report as required
  • Update required documentation daily
  • Complete required documentation as specified in client or company’s procedures in a timely manner
  • Perform cross training
  • Deliver reports to customers
  • Documentation of formal education (high school diploma, GED, or college degree)
  • Minimum of two years experience in electrical inspection
  • Current Electrical License (or approved equivalent) or Current Electrical Administrators (EA) License or Electrical Engineering degree
  • Current driver's license from state of residence
  • Demonstrated verbal and written communication skills as well as basic computer skills (Outlook, Excel and Word)
  • Ability to communicate and cooperate with diverse groups of people
  • Commitment to obtain and successfully complete all required computer-based training within allowed time frame
  • Alaska Native tribal affiliation
40

Senior Electrical Inspector Resume Examples & Samples

  • Possession of a valid California driver's license
  • High school diploma and eight years electrical inspection or appropriate Apprentice/Journeyman experience are required
  • An in-depth working knowledge of applicable materials and electrical installations
  • Extensive experience in power lighting transmission and controls of medium to high voltage electrical systems in commercial institutional and/or industrial applications is required
  • Ability to read and completely understand contract documents is required
  • Ability to take-off quantities from construction drawings and field measure quantities completed in the field is required
  • Familiarity with National Electric Code (NEC)
  • Demonstrated success on the job as evidenced by prior satisfactory performance acceptance of responsibility and growth in previous position
  • Effective oral and written communication skills. Ability to properly document installation of work and contractors’ performance
41

Electrical Inspector Resume Examples & Samples

  • Oversight of more complex tasks such as
  • Must have a minimum of 5years of experience
  • Four year college degree is PREFERRED
  • Previous experience with highway/bridge/tunnel electrical projects is required
42

Instrument & Electrical Inspector Resume Examples & Samples

  • The Inspector may also be required to perform material and equipment receiving inspection to insure condition of the items received, as well as correct quantity descriptions, assemblies and correct information on data plates or name plates in conjunction with correct sizes and color codes
  • The I&E Inspector may be required to assist in inspection and verification for all installation of plant and site instruments, alarms, detection devices wiring and tubing connections, control panels, junction boxes, instrument air headers, air compressor instrumentation and control room integration systems
  • The Inspector may conduct the installation inspection for the electrical equipment and instruments utilizing P&ID, one line drawings, data sheets and vendor catalog information in conjunction with the NEC, IEEC, NEMA, IEEE specifications
  • The Inspector may also witness electrical tests for low voltage, medium and high voltage control panels, switchgear, motor controls (MCC), transformers, breakers and protective relays and meters
  • The Inspector may also inspect and verify correct dimension, installation and identification for the heat trace devices, electrical lighting and plug outlets, grounding devices and cathodic protection devices
  • The I&E Inspector may also assist the electrical engineer and instrument technicians during various stages of inspection and functional testing, utilizing the test checklist and test procedures for field instrumentation and field control room electrical equipment
  • The Inspector must have the working knowledge and management skills for detail electrical and electronic inspection and witness testing
  • The Inspector must review and understand the drawings, specifications and data sheets, and insure that the correct instrument, switch, control panel, meter, actuator, etc, is installed, adjusted and tested in compliance with the specifications. Additionally, the Inspector must conduct the visual inspection for each instrument, valve, controller, etc., and verify the data plate information, size, classification, and pressure range
43

Electrical Inspector Resume Examples & Samples

  • Responded to contractor’s RFI & FCR
  • Supervise and inspection of fixed normal light, emergency light, track light and exit light
  • Prepare comments for inspection request to make hand over for the
44

Construction Electrical Inspector Resume Examples & Samples

  • Provide daily oversight of the electrical system construction installation including underground and overhead electrical collection systems, transmission lines, electrical equipment, and communications equipment
  • Prepare daily reports outlining progress of the work
  • Ensure that electrical construction installations are completed in accordance with project documents and specifications
  • Review and comment on contractors’ schedules and provide assistance to the project team in meeting the overall project objectives
  • Successful completion of four-year apprenticeship program, or an equivalent combination of training and experience that includes seven years of related work experience and attainment of a journeyman’s card
  • 5+ years supervising crews and electrical jobs
  • Thorough knowledge of NEC and local codes, high-voltage safety codes, electrical theory, mathematics, electrical construction, maintenance methods, and the proper use of personal protective equipment
  • Proficient with MS Suite (Word, Excel, Outlook)
45

Electrical Inspector Resume Examples & Samples

  • Inspects and verifies materials, products, and equipment conformance to specifications per requirements and identified standards
  • Marks items for acceptance or rejection, records test results and inspection data, and compares findings with specifications to ensure conformance to standards
  • Identify, label and generate reports as well as non-conformance reports for all defective materials
  • Ensure control and maintenance of all related documents for material, product, or equipment retention period
  • Inspect for physical damage
  • Control of non-conformance items
  • Ensure inspection times are met
46

Electrical Inspector Resume Examples & Samples

  • Electrical engineering or electrical construction background
  • Knowledge and understanding of electrical building codes
  • Experience on construction projects with values greater than $25 million
  • Experience on federal or DOD projects
  • Proficient in the use of computers and construction related software