Electrical / Mechanical Resume Samples

4.8 (82 votes) for Electrical / Mechanical Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical / mechanical job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
BO
B O'Hara
Braulio
O'Hara
1312 Trantow Garden
San Francisco
CA
+1 (555) 655 8651
1312 Trantow Garden
San Francisco
CA
Phone
p +1 (555) 655 8651
Experience Experience
Phoenix, AZ
Electrical / Mechanical Engineer
Phoenix, AZ
Champlin-Harris
Phoenix, AZ
Electrical / Mechanical Engineer
  • Operate computer-assisted engineering and design software and equipment to perform engineering tasks
  • Perform detailed calculations to compute and establish manufacturing, construction, and installation standards and specifications
  • Familiarity with plastic plumbing, some machine work and 115-480VAC power would be an advantage
  • Legal right to work in the UK
  • Oversees periodic maintenance of electrical and mechanical systems. Manages vendors and ensures proper use of procedures
  • Evaluate and develop or purchase test equipment, fixtures and tools to increase the accuracy and efficiency of the rest of the department
  • Performs other duties as directed
Dallas, TX
Electrical Mechanical Maintenance Technician
Dallas, TX
Ferry-Miller
Dallas, TX
Electrical Mechanical Maintenance Technician
  • Working knowledge of power transmission equipment and bearings
  • Calibrates and repairs pneumatic systems and other mechanical systems on production equipment to assure optimum performance of that production process
  • Performs minor and major repair of all buildings and equipment
  • Performs highly diversified duties to install and maintain production machines and plant facility's electrical and mechanical equipment
  • Provide rapid response to ensure seamless productivity
  • Maintains housekeeping in areas of assigned responsibility to ensure a safe and clean work environment
  • Performs other duties as assigned
present
San Francisco, CA
Substations Electrical Mechanical & Civil Designer
San Francisco, CA
Rolfson, Lakin and Pagac
present
San Francisco, CA
Substations Electrical Mechanical & Civil Designer
present
  • Knowledge about Project organization and engineering process covering his field of activity
  • Working knowledge of geometric dimensioning and tolerance
  • Create CAD models and Drawings using CAD Software. Check, validate, and issue master models and drawings
  • Create 2D and 3D CAD models and Drawings using CAD Software. Check, validate, and issue master models and drawings
  • Give support to project construction team in order to solve any issue related to substations engineering
  • Support Project-planning schedules
  • Follow design process
Education Education
Bachelor’s Degree in Electronics
Bachelor’s Degree in Electronics
North Carolina State University
Bachelor’s Degree in Electronics
Skills Skills
  • Strong mechanical and electrical cable assembly and installation aptitude with demonstrated knowledge of basic hand tools and test equipment
  • General knowledge of common information system (computer and network) hardware interfaces
  • Basic understanding of AC/DC Power/Grounding Principles
  • Be proficient with Microsoft Office applications including Word, Excel, and Power Point
  • Experience with assembling electrical cables and terminating MIL-STD and Commercial connectors
  • Experience working in a multi-disciplined environment
  • Experience with interpreting engineering drawings and working with production work orders
  • Active DOD Secret Clearance
Create a Resume in Minutes

15 Electrical / Mechanical resume templates

1

Electrical / Mechanical Designer Resume Examples & Samples

  • Provide engineering design details and assemblies for new equipment or modifications to existing equipment
  • Support the overall WDP&R CAD/CAE community with development of new tools, software and processes
  • Proven Five (5) plus years experience in mechatronics design of complex industrial automation, conveyance or transportation based systems
  • Demonstrated proficiency in AutoCAD and SolidWorks; minimum of three (3) years experience
  • Team player with excellent interpersonal skills with the ability to provide feedback and coaching to team members of all levels
  • Ability to work flexibly on multiple projects in a high paced environment
  • Demonstrated experience with: Creating completed drawing documentation packages, configuration management, dimensioning and tolerancing, design of weldments, sheet metal design, material selection, fastening and joining, machine and fabrication shop practices, inspection, hydraulics and pneumatics, machine repair practices, electrical design, electrical wiring diagrams, electrical schematics, mechanical details and assemblies for racks and control boxes
  • Demonstrated proficiency utilizing Microsoft Office applications including Word, Excel, PowerPoint and Outlook
  • Ability to work in the office and/or in the field for extended times and be able to climb around a job site
  • Experience with Mil based design standards
  • SolidWorks Professional Certification
  • Experience with GD&T per ASME Y14.5
  • Two (2) or more years of college, mechanical or electrical engineering or technology courses; preferably with an Associates or higher level degree
2

Electrical / Mechanical Engineer Resume Examples & Samples

  • Monitors the operation of critical power & cooling systems to ensure the delivery of stable power and adequate HVAC to servers and other technical systems
  • Oversees periodic maintenance of electrical and mechanical systems. Manages vendors and ensures proper use of procedures
  • Identifies, responds and troubleshoots equipment failures and operational anomalies
  • Acts as the primary point of contact when mission critical facility subsystems malfunction and ensures the appropriate service is performed and problems are effectively resolved
  • Engages and coordinates vendor, engineering and peer support as required to resolve issues
  • Supports the Technical Facility design and construction management teams. Researches existing field conditions; reviews designs, plans & drawings; shares knowledge, ideas and best practices and suggests improvements based on field experience. Monitors construction activities for quality and compliance
  • Develops and maintains up to date Methods of Procedure (MOP’s) required for routine preventive & remedial maintenance, installation, commissioning and recovery of facility systems
  • Strives for continuous improvement in the reliability and efficiency of facility systems
  • Manages vendors, including: preparation of scopes of work and service agreements; negotiates pricing; manage technical, cost and schedule performance; and reviews deliverables for quality and compliance
  • Provides guidance to clients on function, usage, and operation of products. Serves as liaison between the organization and customers. Conveys customer feedback to technical design and engineering staff
  • Interfaces directly with architects, mechanical / electrical / plumbing (MEP) engineers, consultants, equipment vendors, general & trade contractors, property management and other internal / external organizations
  • Prepares reports on facility related activities
  • Travels to sites to support construction and equipment installation, start-up, testing, commissioning and maintenance efforts
3

Electrical / Mechanical Technical Supervisor Resume Examples & Samples

  • Diagnoses, troubleshoots, maintains, and repairs process/production machines, equipment and related electrical equipment
  • Procures parts from crib systems, OEM or authorized vendors
  • Develops and monitors work assignments for other technicians and coaches as appropriate
  • Creates and modifies site operations procedures for equipment and recommends facilities reliability improvements
  • Recommends activities to improve maintenance methods and equipment performance
  • Understands company policies and enforces safety regulations. Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required
  • Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions
  • Maintains a strict schedule in order to be successful in the assignment, yet demonstrates flexibility in the day-to-day activities and scheduling for the benefit of the customer
  • Fluent with Inventory and Materials Management concepts, such as inventory control and analysis, material lead times, cost analysis, usage analysis, etc
  • Promotes and adheres to the AECOMSafety Structure
  • Bachelor's degree in electrical engineering or an electrical field related to production maintenance
  • Experience leading or supervising a multi-skilled technical workforce
  • Experience troubleshooting and maintaining machine Tools in a heavy machining environment
  • Experience troubleshooting and diagnosing Allen Bradley PLC’s such as SLC 500, SLC 5000, Micro Logix, Control Logix, etc
  • Experience troubleshooting and diagnosing CNC and Robotic machine systems
  • Experience troubleshooting and diagnosing Variable Frequency Drives
  • Experience troubleshooting and repairing Components up to 480V 3 Phase
  • Experience managing new installation, validation, and start up of new manufacturing or assembly equipment in a steel manufacturing environment
  • Experience in troubleshooting or calibrating 4-20mA circuits and components
4

Electrical Mechanical Optical Tester Resume Examples & Samples

  • ) Works from prints, schematics, engineering changes, wiring diagrams, procedures, sketches, and similar documentation of electrical, electronic, mechanical, electro-mechanical, hydraulic, pneumatic and other functional subsystems
  • ) Tests, evaluates, and verifies the performance of subsystems for conformance with technical and operational requirements; validates and performs systems tests under direction of higher graded employee
  • ) Sets up and operates requisite checkout equipment, specially designed functional test panels and consoles, and other recording devices
  • ) Analyzes subsystems failures and malfunctions to determine cause; rectifies by performing minor repairs, such as replacing malfunctions units, parts, or wiring and completes checkout; or requests cognizant manufacturing, engineering, or quality division for requisite corrective action. Performs retest of reworked or modified subsystems
  • ) Observes, records, analyzes, verifies and interprets sectional and composite instrument and panel readings, makes computations and calculations requisite to the collation of data and assists higher graded personnel in locating and eliminating discontinuities and transient irregularities caused by test station interference
  • ) Recommends changes in tests and testing procedures to facilitate the obtaining of complete and accurate test information
  • ) Performs other assigned functions such as maintaining pertinent logs and records, demonstrating equipment operations and trains other technicians as required
  • ) Must have the ability to work 1st, 2nd, or 3rd shift as required
5

Electrical / Mechanical Engineer Resume Examples & Samples

  • Develop products that require electrical engineering from our customer’s requirements through the creation of drawings, procedures and work instructions using our Global Shop Solutions ERP
  • Evaluate and develop or purchase test equipment, fixtures and tools to increase the accuracy and efficiency of the rest of the department
  • Develop test plans and procedures for all items manufactured
  • Work with inspectors and vendors to obtain a satisfactory end product
  • Coordinate with sales, purchasing, production and quality control, and mechanical engineers as well as our current and future suppliers
  • Review current tools and methods for inefficiencies and initiate corrective actions where needed
  • Operate Halt/Hass chamber, PCB test stand and operational test equipment
  • Bachelor’s degree in Electrical or Mechanical Engineering or equivalent
  • Ideal candidate will have 2+ years experience in an electronics manufacturing environment. We are willing to train the right person
  • Experience with SolidWorks and Pro E is desired
  • Knowledge of Microwave Technology and Fiber Optic Technology
  • Strong verbal and written communications skills
  • Ability to follow procedures, read blue prints and schematics
  • Use of MS Word & Excel to collect data and issue detailed reports on pre and post Hass Testing
  • Ability to interpret oscilloscope readings, voltages out-puts and resistance levels for any test point on the PCB’s
  • Must be authorized to work in US
6

Industrial Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Minimum 3 years’ Electrical experience (Preferred)
  • Computer literate and able to be effective and efficient with various computer applications
  • Strong electrical experience (low voltage to 480V) with solid hand on mechanical background
  • Operate standard shop equipment
  • Experience working with electrical/electronics, PLCs, A/C and D/C motors, servomotors, drives, and controls, as well as process control instrumentation devices (thermocouples, pressure switches, proximity sensors, etc.)
  • Experience with troubleshooting PLC’s
  • Experience with AC and DC drives in fan, pump, and conveyor applications
7

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • 2 - 3 years of Electro-Mechanical Automation System Installation & Troubleshooting Experience
  • Must be fully computer literate with Microsoft environment
  • Ability to work independently in a mature and professional manner
8

Electrical & Mechanical Engineering Co-ops Resume Examples & Samples

  • Building Parts
  • Testing Parts
  • Making deliveries to ZF TRW customers
  • Light 2D and 3D CAD Work
  • Assisting Engineers with other daily activities as assigned
9

Electrical / Mechanical Engineer Intern Resume Examples & Samples

  • Working knowledge of Physics, Mechanical Engineering, and Electrical Engineering
  • Working knowledge and proficient at setting up experiments, analyzing data and using typical lab equipment
  • Support of technology programs which are directly tied to annual cost savings
  • Investigate return goods
  • Assist Development or Program Engineer
  • The candidate must also focus on the importance of customer satisfaction, meeting program milestones and schedule
  • Must be working towards a Bachelor of Science in Mechanical Engineering, Electrical Engineering, Aerospace Engineering, Physics, or related degree
  • Desire work as team member and have a self-learner mindset
10

Senior Manager, Electrical & Mechanical Resume Examples & Samples

  • Operating and maintaining of the M&E systems, including setting up SOP and training roadmaps for team, equipping the appropriate tools to ensure smooth operation and fast recovery
  • Rationalize on the maintenance routines and requirement to ensure adequacy, determine inventory projections to ensure uptime repairs, implement corrective maintenance, preventive maintenance and predictive maintenance for the M&E system to ensure the system's reliability and resiliency meet the demanding business requirements
  • Ensuring that the events and projects were carried out without glitch with the most cost effective solution
11

Electrical & Mechanical Specialist Resume Examples & Samples

  • Responsible for all activities related to the design of the project’s tunnel electrical, mechanical, communications, and related works, including power supply alternatives
  • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related required
  • Professional engineering license preferred
  • At least 10 years of experience with electrical and mechanical (E&M) projects, with a particular focus on major infrastructure development projects and feasibility studies
  • At least 5 years of experience working on projects located in environments similar to the project area in Afghanistan
  • Willingness to work within Afghanistan
12

Electrical / Mechanical Engineer Resume Examples & Samples

  • Assigned to the SPAWAR Facility Lab, Tampa
  • Design, test, and provide follow on engineering support of electronical and mechanical assemblies/systems supported by the program
  • Create, update, and review of technical documents and Technical Data Packages (TDPs)
  • Must have a current TS clearance (TS/SCI Preferred)
  • BS Degree in Electrical/Computer Engineering or Physics
  • Fifteen (15) years’ experience in “Relevant Technical Field”, to include: Technology Analysis and Assessment, Design Definition, Development of Systems Specifications, Systems Analysis, Systems Architecture, Systems/ Equipment Integration, Test & Evaluation Criteria, and Logistics support of C4ISR requirements
  • Strong background (2 YR minimum) experience creating drawings in support of military Technical Data Packages (TDP)
  • Experience in electrical and mechanical engineering concepts
  • Possess mechanical skills relating to metal fabrication and modification
  • Must have SolidWorks CAD documentation experience
  • SolidWorks CAD documentation including sheet metal and routing concepts
  • Operating and configuring Cisco routers and switches, and various network appliances
  • Antenna theory and application
  • Heat management components for electronics equipment (fans, heatsinks, air conditioning, heat pipes, and Peltier devices)
  • Operation and programming of CNC machines for metal fabrication
  • Soldering hole and Surface Mount Technology (SMT) electronic components
  • Test procedure creation and implementation
  • Heat testing procedures and equipment
  • Design and order placement for printed circuit boards
  • Design of products for fabrication in 3D printer
  • Mechanical and laser etching
  • Satellite communications systems (military preferred)
  • Design of metal enclosures for electronics integration
  • Drawing and document configuration management
  • Equipment and process specifications including Mil Spec, ASME. ISO, UL
  • Power distribution in AC and DC electrical circuits
  • Design of power distribution and machine control circuits
  • Battery backup and battery charging equipment
13

Electrical Mechanical Tech, rd Shift, p.m Resume Examples & Samples

  • Respond to all work orders related to Intelligrated conveyor system
  • Perform preventative maintenance on all lift equipment and conveyor systems
  • Examine and maintains protective guards and other safety devices on all equipment and makes adjustments as necessary
  • Assist where needed in the facility
  • Perform general construction work including rough in, drywall, etc
  • Interface with vendors as required
14

Electrical / Mechanical Engineer Resume Examples & Samples

  • Support hardware test lab with activities including hardware set-up and validation of proper operation conditions, screening product for operational limits, drafting test reports and presenting results
  • Work closely with design team to help identify and resolve hardware design problems,especially as they relate to overall product quality and reliability
  • Analyze test results, pro-actively seek solutions, and recommend/drive corrective action(s) on a variety of complex component, pcb, platform and/or system issues
  • Provide timely reporting of activies and projects
  • A team player with strong communication (written and verbal) and good presentation skills
  • Knowledge of engineering principles, concepts, and theories
  • Basic knowledge of Converged Infrastructure products is desired
  • Knowledge of thermal requirements for hardware platforms in a Data Centre is desired but not required
  • Basic knowledge of system hardware, firmware loading, and general diagnostics
  • Basic lab knowledge of scopes, tools and server hardware, bios, lan, etc
  • Ability to write and interpret test specifications, analyze failure reports, and provide input to reliability and quality planning to identify potential problems with new and existing product designs
  • Basic understanding of failure analysis and ability to drive corrective action
15

Electrical / Mechanical Controls Tech Resume Examples & Samples

  • Responsible for the efficient operation and maintenance of all StockPot equipment ensuring product quality, employee safety, and food safety standards, as well as regulatory requirements are met or exceeded
  • Areas of responsibilities include, but not limited to: Production lines, Prep Areas, Dry and Finish Goods Storage, Chillers, Kitchen Ventilation, Fire and Safety Systems, Buildings and Grounds, CIP, and Bulk Chemicals
  • Supports adherence to the production schedule developed by the Master Scheduler ensuring the highest levels of customer service and production efficiency by ensuring effective and efficient equipment operation and limited downtime
  • Candidate should have working knowledge of industrial control systems, PLC systems and relay logic
  • Must have proven experience and ability in electrical/mechanical and electronic troubleshooting techniques
  • Good communication skills to work with plant personnel and vendors
  • Two-year degree, Electronics Certification, 5 years in related field or equivalent training
  • Demonstrated proficiency with computers and software
  • Food manufacturing experience preferred
  • Allen Bradley PLC and Wonderware experience is a plus
  • The physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
  • Extensive walking and standing
  • Vision/hearing
  • Talking
  • Climb and balance
  • Lifting up to 50 lbs
16

Substations Electrical Mechanical & Civil Designer Resume Examples & Samples

  • Create CAD models and Drawings using CAD Software. Check, validate, and issue master models and drawings
  • Work within the guidelines of applicable GE Policies & Procedures, Engineering Standards, Design Customer Operating Procedures, Specifications, Government and Commercial Standards, and special security requirements
  • Draw and elaborate civil and structural basic design and detailed for HV and EHV substations such as: HV equipment foundations sizing, control building and relay building design, drainage, metallic structures design (Equipment support and gantries), etc
  • Translate in drawings civil design criteria’s for substations, ensuring traceability from Customer requirements specifications
  • Elaborate electromechanical basic and detailed drawing designs for HV and EHV substations such as: Physical arrangements, electrical and electromechanical equipment, shielding, earthing designs, all complementary systems etc
  • Detail main electrical characteristics of HV equipment, ensuring traceability from Customer requirements to equipment specifications
  • Understand Design Change documentation and requirements and execute changes
  • Define dimensional constraints and geometric tolerances required for proper clearances and fits while maximizing manufacturing capabilities
  • Drive Model Based Definition initiative within the team
  • Identify process and product improvements
  • Support Project-planning schedules
  • Concurrently work on multiple projects, monitoring progress and quality and ensuring schedule requirements are met
  • Follow project strategy
  • Follow design process
  • Give support to project construction team in order to solve any issue related to substations engineering
  • Have a Bachelor's Degree in related field
  • Experience with CAD Models
  • Knowledge of international normative related to substations design
  • Working knowledge of geometric dimensioning and tolerance
  • Communication skills in English. Must have High Intermediates Level. Must be able to maintain a normal day-to-day fluid conversation on any topic)
  • Knowledge of Transmission or Distribution industry
  • Knowledge about Project organization and engineering process covering his field of activity
  • Legal right to work in Mexico. We will not sponsor individuals for employment visas, now or in the future, for this job
  • Knowledgeable of Alstom technology
17

Electrical Mechanical Maintenance Resume Examples & Samples

  • Maintain thorough working, set-up and operating knowledge of machines, equipment and processes. Remove, replace, align and adjust all mechanical parts and units
  • Mentally and visually pay attention to detecting jams, defective material or improper seating of parts in fixtures, recognizing any operating difficulties and making corrections utilizing standard operating procedures as needed
  • Diagnose machine or equipment trouble and determine type and extent of repairs necessary
  • Using a systems approach, troubleshoot equipment, linking mechanical functions to electrical drive and inspection devices
  • Tighten or repair low voltage wiring on machine and peripheral equipment
  • Tear down unit, repair or replace worn, broken or defective parts, reassemble set-up and try-out; make necessary adjustments to insure proper operation and quality production
  • Use special height gages, dial indicators and checking devices to ensure accurate heights and run parts to very close tolerances
  • Demonstrate good written and verbal communication skills to explain problems, to train others in the department and to maintain records of maintenance performed on each machine
  • Be able to move (push, pull, or otherwise manipulate) materials up to 75lbs. and be capable of bending and stretching
  • Work on new or altered machines or equipment and make necessary corrections or alterations to ready the same for production. Perform trial operation on same and be capable of operating any machine in the department as directed for production needs with the same skills as a machine operator
  • During electrical equipment failure, determine type of malfunction such as sensor optic or input/output signal and adjust
  • Follow an established preventive maintenance schedule and perform a complete check out on each machine, as required
  • Detect and clear misloaded parts as necessary to ensure a constant flow of parts along tracks to fixtures. Report unusual conditions or faulty operations to proper supervision
  • Maintain work areas in a clean and orderly condition
  • May require work with Tool Room and engineering support groups and may occasionally require the fabrication of certain machine parts
  • Use proper PPE while handling hazardous waste associated with the manufacturing process which includes but not limited to; DOT Labeling, correct container selection, storage procedures, waste manifests, etc…
  • Knowledge of National Electric Code
  • Mathematical skills with knowledge to apply mathematical calculations to analyze basic circuit loads
  • Knowledge of discrete inputs and outputs in relation to a PLC. Knowledge of analog (4-20ma, 0-5V, 0-10V) inputs and outputs in relation to a PLC. Difference between sourcing and sinking inputs and outputs in relation to a PLC
  • Trade School desired, but not required
  • Minimum five years hands-on experience in Industrial Electrical/Mechanical Maintenance
18

Electrical / Mechanical Production Technician Resume Examples & Samples

  • Repairing and maintaining production equipment in a timely manner
  • Performing complex troubleshooting of electrical, controls, pneumatic, and mechanical systems
  • Dismantling, moving, assembling, installing and repairing all types of conventional and NC/automatic machine tools
  • Reading and interpreting blueprints, layout plans, operating and repair manuals
  • Implementing upgrades and changes to existing equipment
  • Performing minor rebuilding projects on major machine tools and equipment
  • Minimum education of High School Diploma required
  • Minimum five years of experience as a Production Technician within a manufacturing environment
  • Ability to troubleshoot and repair all mechanical components on a variety of manufacturing and industrial equipment
  • Strong mechanical and electrical skills with PLC experience
19

Electrical & Mechanical Design Engineer Resume Examples & Samples

  • Graduate major in electrical、Automatic control or Mechanical-electrical integration
  • Better has at least 5 years’ experience in designing of circuit protection, such as Circuit-Breaker
  • Good skill on 3D design software, such as Pro-E or Creo, and SolidWorks is a must
  • Good skill on 2D design software, such as AutoCAD
  • Highly motivated, responsible, and good team work spirit
  • Good oral and writing in English
20

Electrical / Mechanical Research Technologist Resume Examples & Samples

  • Develop and implement maintenance plans with minimal supervision to optimize and ensure capability maintenance and growth in the forming, foundry and welding areas
  • Communicate results through internal reports, technical publications and/or progress reports
  • Lead the removal, site preparation and installation of new equipment around the Sigma Complex
  • Develop and train new technicians and technologists in the areas of electrical/mechanical system equipment in Sigma
  • As a subject matter expert, develop and maintain authorizing documents to perform work safely and compliantly in the Sigma Complex
  • Work with vendors to maintain, troubleshoot and repair instrumentation and equipment in the facility
  • Maintain supplies for the equipment in these areas
  • Ensure that the work areas remain tidy
  • Experience preparing reports, papers or other scientific publications
  • Experience developing novel ideas written into proposals or presented to both internal and external customers
21

Electrical Mechanical Maintenance Tech Resume Examples & Samples

  • Repair and maintain all conveyor systems
  • Ensure that an appropriate in-house supply of parts is available
  • Perform general maintenance of all facility equipment
  • Enter work order, work log, and parts information into the computer system
  • Repair and maintain hydraulic systems, dock door and leveling equipment, racking systems, plumbing systems, sprinkler systems, air compressor and dryer equipment, and pneumatics
  • Operate Electrical testing equipment
  • Other duties as assigned by lead or supervisor
  • Work in a warehouse environment, which includes working throughout seasonal temperature variations
  • While performing duties of the job, the employee may operate warehouse equipment
  • Use of proper safety procedures will eliminate any potential hazards; noise level in the work environment is usually moderate
22

Electrical / Mechanical Cadd / Revit Operator Resume Examples & Samples

  • Convert hand mark ups into either AutoCAD or REVIT software
  • Update backgrounds from outside sources
  • Be responsible for consistent and professional appearance of drawings
  • Meet deadlines for multiple tasks
  • Conduct all tasks in cooperation with electrical and other engineering disciplines
  • Manage and enhance client relationships
  • Perform basic electrical layouts and drawing set up without supervision
  • 2-4 years’ experience drawing electrical systems for buildings and industrial facilities including power distribution, lighting, life safety and communications
  • Excellent working knowledge with AutoCAD (experience with Revit MEP software preferable)
  • Ability to work independently to deliver quality drawings consistently, often within demanding timelines
  • Experience in buildings, transportation and infrastructure is very desirable
  • Experience creating electrical drawings from Architectural backgrounds
  • Good initiative, attention to detail
  • Experience with Mechanical systems or drawings
23

Electrical, Mechanical & Commodities Buyer Resume Examples & Samples

  • Under general supervision, manages various aspects of supplier relationships, including contract negotiations, delivery and quality performance, cost and inventory management, and customer satisfaction
  • Manages purchase order execution and product delivery, including placement of on-time schedule agreements, mitigation of billing adjustments / terminations and execution of cost reduction goals
  • Selects and negotiates with approved vendors
  • May substitute items within pre-approved guidelines
  • May train lower level buyers. Reviews bids and contracts submitted by lower level buyers before orders are placed. May substitute items without approval
  • Actively drives supplier improvement activities and supplier program reviews
  • Works to maximize production capacity in accordance with production and master schedules
  • Recommends new developments in materials and supplies
  • Fosters active daily use of continuous improvement tools to improve HS&E, quality, delivery, financial performance, employee engagement, and customer satisfaction
  • Conducts all business activities in accordance with Baker Hughes Health, Safety and Environmental
  • Handles special projects as assigned
  • Bachelor’s Degree
  • 4+ years’ procurement, sourcing or similar experience
  • Experience applying stand-alone knowledge of purchasing practices, principles and procedures
  • Strong negotiation and communication skills
  • Must be able to balance multiple projects in a challenging, fast-paced work environment
  • Must be able to work in a cross-functional team and demonstrate consistent forward progress
  • Knowledge of SAP
  • Advanced knowledge of MS Office applications, including advanced level knowledge of Excel
  • Ability to analyze and present statistical data
  • Bachelor’s Degree in Supply Chain Management, Finance, Industrial Engineering or similar field
  • Holds APICS - CPIM
  • Project or Order Management Experience
24

Data Center Electrical & Mechanical Trainer Resume Examples & Samples

  • Act as a training subject matter expert for the operation and maintenance of electrical equipment within our data centers
  • Train employees on how to safely operate and maintain data center critical systems, which includes stand-by diesel generators, PLC Switchboards, UPSs, PDUs, VLA Batteries and associated systems
  • Delivering instructor led training, workshops, webinars and other learning events for Infrastructure Operations teams
  • Collaborating with training team members to ensure training classes are scheduled in accordance with our global curriculum
  • Assisting in establishing an in house training facility for continuous learning
  • Experience delivering instructor led training
  • Understands the content development process and hands on experience creating training aids, training materials and/or written instructions/procedures
25

Electrical & Mechanical Expert Resume Examples & Samples

  • Responsible for coordination and production of the designs of the MEP systems across the entire system
  • Supervise design of mechanical and electrical services
  • Supervise design according to International and local specifications, regulations and design guides
  • Responsible for QA and the checking of all MEP design work carried out
  • Attend meetings with the client to update on design progress
  • High level of client interfacing, and design coordination
  • Preparing technical specifications and reports
  • Strong verbal and written communication skills (English)
  • Ensure delivery is in line with the client objectives, on time and within the agreed budget
  • Has a proven track record and experience in successful design delivery on similar Projects
26

Feed Mill Electrical / Mechanical Engineer Resume Examples & Samples

  • Electrical engineering experience with mechanical engineering knowledge
  • Educated to GCSE ”0” Level standard or equivalent within a engineering discipline
  • Fully Qualified with a nationally recognised certification
  • Excellent motivational, interpersonal and organisational skills
  • Ability to communicate at all levels of business
  • Experience of working with Shire PPM systems is desired
  • Experience in all aspects of control of contractors on site
  • Ability to work under pressure and prioritise workloads
  • Computer Literacy: proficient in Microsoft and PPM Applications
27

Civil Electrical Mechanical Industrial Engineer Architect Resume Examples & Samples

  • 464115100
  • It is the applicant’s responsibility to verify that all information in their resume and documents, whether uploaded or faxed, are received, legible, and accurate. HR will not modify answers/documents submitted by an applicant. **
  • TECHNICAL ENERGY EXPERTISE
  • PLANNING AND EVALUATING
  • PROJECT MANAGEMENT
28

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Willing and able to work twelve (12) hour rotating shifts, overtime, weekends, and holidays
  • Experience using precision tools e.g.: inside and outside micrometers, multimeters, indicators and voltage testers
  • Completion of a mechanical or electrical apprenticeship program
  • Experience with electronic components, sensors, programmable logic controls (PLCs), AC/DC drives and motors, and servo drives and motors
  • Experience operating welder, torch, plasma cutter, mill, lathe, drill press and power/hand tools
  • Experience using a forklift, scissors lift, high lift and other mobile equipment
29

Electrical / Mechanical Engineer Resume Examples & Samples

  • PLC Programming and troubleshooting (Allen Bradley). Proficiency reading, writing and troubleshooting ladder logic
  • CE, UL and CSA familiarity
  • Experience with common fabrication methods (ranging from soldering to PVC gluing) to engage in on-the-fly industrial builds and assemblies
  • Proficient in C+ programming with embedded controllers
  • Ability to comprehend and generate electrical schematic
  • Some familiarity with data translations and monitoring through Redlion translator
  • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards
  • Prepare specifications for purchase of materials and equipment
  • Associate or Bachelor’s degree in Engineering
  • Experience of relevant work experience preferred
  • Familiarity with plastic plumbing, some machine work and 115-480VAC power would be an advantage
30

Data Center Electrical & Mechanical Infrastructure Instructional Technologist Resume Examples & Samples

  • Provide practical, hands-on training for Infrastructure Operations teams
  • Monitoring the UPS fundamentals training program for Infrastructure Operations teams
  • Assisting the Technical Writers to develop emergency operating procedures for data center critical systems
  • Providing technical assistance to infrastructure operations teams as required
  • Preparing training facilities and coordinating practical training
31

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Performs highly diversified duties to install and maintain production machines and plant facility's electrical and mechanical equipment
  • Diagnoses electrical, pneumatic, hydraulic and mechanical issues associated with all equipment in a manufacturing environment
  • Reads electrical schematics and interprets specifications
  • Troubleshoots high-voltage systems up to 480 volt 3-phase, 500 volts DC, and low-voltage control circuits
  • Tests equipment operation including digital multi-meters and amp meters
  • Analyzes and repairs electro-mechanical equipment, fixtures, and process control equipment including processors, sensors, drives, instrumentations, etc
  • Maintains housekeeping in areas of assigned responsibility to ensure a safe and clean work environment
  • HS diploma or equivalency; 3-5 years related experience
  • Strong knowledge of electrical theory including basic ohms-law application
  • Mechanical skills to include experience with pneumatic and hydraulic systems
  • Ability to utilize hand tools for repair of electrical and mechanical systems
  • Ability to operate forklifts, scissor lifts and boom lifts
  • Good written and verbal communication skills, decision making ability and mathematical knowledge
  • Basic computer skills with Microsoft Office
  • Experience in a thermoforming and extrusion environment preferred
  • Welding experience a plus
32

Electrical / Mechanical Designer Resume Examples & Samples

  • Associates Degree in the electrical field (OR High School diploma with a minimum of 2 years of work experience in electrical design)
  • Minimum of 2 years of experience in the use of AutoCAD (recent version) or equivalent computer aided design platform
  • Experience in three phase circuitry
  • Bachelors Degree from an accredited university
  • Computer Aided Design certification
  • Proficient computer skills in MS-Office Suite. Desire experience with Promis*e, E-Plan, Rulestream, SAP, and Windchill
  • Technical knowledge of requisition engineering and manufacturing processes
  • Experience with Lean continuous improvement
  • Strong ability to interact with engineering and assembly teams to solve technical problems
  • Proven leadership skills to be able to work in cross functional teams
  • Demonstrated oral and written communication skills
33

Electrical / Mechanical Service Technician Resume Examples & Samples

  • Installing, servicing and maintaining Pitney Bowes' Production Mail products at customer's premises within specified guidelines and to customer's satisfaction
  • Accurately reporting all activities and time using a standard methodology to ensure accurate customer billings and internal records
  • Presenting a professional image in all interactions with customers and other departments
  • Meeting and exceeding all standards required by Pitney Bowes such as, first time fix and parts inventory management
  • Providing timely and courteous customer service to reduce customer service issues
  • English is a must
  • Post-secondary education in a related field
  • Technical competence with specialization in electronics or hardware/software
  • Good track record of performance in technical service and customer relations
  • Excellent electro-mechanical troubleshooting and repair skills
  • Demonstrated ability to learn and retain knowledge quickly
  • Previous experience with a Production Mail mechanical maintenance environment would be an asset
  • This position requires a commitment to standby, flexibility to work rotating shifts and overtime
34

Electrical Mechanical Maintenance Intermediate Resume Examples & Samples

  • Successful completion of Electricity 1 & 2 coursework or equivalent
  • Minimum of 3 years of maintenance C role or equivalent experience
  • Knowledge of material control concepts
  • Electrical or Mechanical Associates degree
  • Master Electricians license
  • Good safety, attendance and performance record
  • Able to do shop math
  • Able to use standard measuring instruments
  • Has mechanical aptitude
  • Has analytical troubleshooting ability
  • Work with minimal supervision
  • High degree of safety knowledge in the area
35

Electrical & Mechanical Cabin System Integrator Engineering Group Global Resume Examples & Samples

  • You have a Bachelor in Electrical/Mechanical Engineering or equivalent and cumulated at least five (5) years of experience with aircraft electrical systems
  • You are familiar with FAR Part 25 and the Aircraft Electrical/Mechanical System certification regulations
  • Good knowledge of AutoCAD, Catia, Enovia and MS Office tools
  • Proven record of leadership and technical problem solver
  • Knowledge in the field of Electromagnetics and Fluid mechanics considered an asset
36

Electrical & Mechanical Engineer Resume Examples & Samples

  • Degree level qualification in Engineering from a recognised tertiary institution
  • Extensive experience in the management of electrical and mechanical system design and specification work for major rail infrastructure projects
  • Demonstrated understanding of and commitment to issues related to frontline customer service and safety particularly in a transport environment
  • Demonstrated experience with and understanding of the legislation, policy, processes and practices involved in planning for and delivering major transport projects
  • The role is identified as a Rail Safety Worker (RSW)
37

Electrical Mechanical Maintenance Advanced Resume Examples & Samples

  • Electrical or Mechanical Associates degree OR HS Diploma / GED and a minimum of 6 years equivalent experience
  • Minimum of 3 years of experience in a maintenance B role or equivalent experience
  • Boiler Operator Certified
  • Able to communicate effectively
  • Strong mechanical aptitude
  • Strong leadership and administrative skills
  • Must work well with others
  • Analytical troubleshooting ability
38

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair
  • Utilize electrical/mechanical skills to maintain machinery
  • Contribute to a collaborative safety culture that drives results
  • Provide rapid response to ensure seamless productivity
  • 2-3 years in trouble shooting industrial electrical control systems down to component level
  • Electrical Certification preferred
  • Able to install and set up both A/C and D/C drives
  • PLC trouble shooting and problem solving ability with practical, mechanical & electrical aptitude
  • Working knowledge of power transmission equipment and bearings
  • Basic welding skills preferred but not required
39

Electrical & Mechanical Engineering Resume Examples & Samples

  • Actively undertake electrical proactive maintenance works (reactive works not yet identified by a client) identified on site
  • Undertake new installations, major and minor electrical repair works and attend to breakdown’s when required
  • To undertake non electrical ppm such as weekly water temperature readings and flushing, HVAC (once competent to do so )
  • Work an amount of overtime to complete out of hours PPM and reactive works
  • Undertake contractor control duties on behalf of the client, including monitoring of contractors and their workmanship, so that relevant standards are met
  • Provide a professional service and represent the company in a way which ensures customer satisfaction
  • To be fully aware of contractual requirements and customer needs at all times
  • Take a pro-active approach to client liaison and ensure that concerns are dealt with or relayed to management as necessary
  • Ensure that administration requirements are actioned on time and all necessary documents / records are maintained accurately
  • Time served electrician with city & guilds part one & two in electrical installation
  • City & guilds 2391 test and inspection desirable
40

Electrical / Mechanical Lab Test Engineer Resume Examples & Samples

  • Perform environmental, mechanical, dynamic, reliability, functional, and EMC/EMI testing on various handheld and mobile computing product and systems
  • Follow pre-defined test plans, work instructions, direction Lab Test Engineers, and test standards
  • Document results for test reports and issue non-compliance reports
  • Interface with internal customers and provide project status updates
  • Perform Environmental, Reliability and Functional tests directed by Lab Test Engineer and or following pre-defined test plans
  • Conduct Temperature testing using Environmental chambers, recording data and observations, and evaluating results
  • Conduct Mechanical and Dynamic testing using Vibration equipment, Drop / Shock Machines, Wear and Abrasion, Loose Cargo, Tumbling Barrel, and various other mechanical stress machines, recording data and observations and evaluating results
  • Conduct Sealing tests using IP Dust and Water machines and equipment, recording data and observations, and evaluating results
  • Conduct EMC / EMI testing recording data and observations, and evaluating results
  • Works from written and verbal descriptions, or defined plans to perform testing, checkout and trouble-shooting functions. Performs operational test and fault isolation on product assemblies and hardware. Take data and keep accurate records on all tasks. Generate reports and analyze the data collected as required
  • Assists product development engineers in the diagnosis and replication of product failures. Analyzes test results and makes recommendations
  • Look up and understand technical documents as related to testing requirements
  • Knowledge of MS Word, Excel, Power Point, and Access
41

Electrical / Mechanical Systems Engineer Resume Examples & Samples

  • Electrical Systems Engineers
  • Mechanical Systems Engineers
  • Minimum education and experience requirements will vary depending on position
  • All positions will require the ability to pass a National Agency Check with Investigation (NACI), and will be located in Greenbelt, Maryland
42

Electrical Mechanical Optical Tester Resume Examples & Samples

  • Ability to use scopes, multimeters, power generators in the testing and verification of electrical, electronic, and electro-optical assemblies. Must be able to follow written procedures and policies
  • Must have the ability to work 1st, 2nd, or 3rd shift as required according to the collective bargaining agreement
  • Ability to obtain a U.S. Department of Defense Security clearance
43

Electrical / Mechanical Engineer Resume Examples & Samples

  • Determines project scope, develops a preliminary plan of investigation, and determines project specifications such as cost, time, and sample requirements by analyzing client input, available supplemental data, and product construction. Projects may include travel to conduct or witness tests at client sites
  • Initiates communication with clients to promote and explain the benefits of new and existing services. Follows up on contacts from clients. Communicates with clients to discuss technical issues, explain UL procedures and requirements, convey project cost, and negotiate completion date and sample requirements. Acts to address client concerns and to resolve client issues. Provides technical assistance to clients in reference to product inspection and follow-up services
  • Establishes appropriate test programs by reviewing files and manufacturer's information, examining samples, and applying UL requirements. Is familiar with applicable standards, company manuals and appropriate technical literature. Examines samples for compliance with UL requirements and notifies client of any areas in which the product is not in compliance or of any changes in project scope or specifications
  • Coordinates laboratory activities by preparing data sheets and instructions to technicians, scheduling and reviewing work of laboratory technicians and engineering assistants, and establishing completion dates. Coordinates administrative aspects of project management. May serve as Project Handler of record and/or Reviewer of record as assigned
  • Communicates project status and results to clients through frequent contact and by preparing reports. Prepares Follow-Up Service Procedures and information pages
  • Integrates continuous improvement concepts and techniques into all aspects of the job
  • Resolves engineering issues associated with Variation Notices by analyzing and reporting on the acceptability of the variations
  • Assists in the development of UL requirements. Assists in developing special test methods and test equipment. Analyzes test program for adequacy and sequence. May coordinate and/or perform File Reviews, as directed. May represent UL at industry related functions such as seminars and trade shows
  • Performs other duties as directed
44

Electrical Mechanical Assembler Resume Examples & Samples

  • Associate degree or equivalent in electromechanical technology or similar (industrial maintenance, electronics technology)
  • Three to five years of experience in a high speed manufacturing environment
  • Technical training in electronics, electricity, mechanical and hydraulic systems
  • Computer skills including working knowledge of MS office
  • Technical drawings experience - ability to interpret said drawings
  • Must meet deadlines and deliver quality results
  • Detail oriented with demonstrated ability to effectively manage multiple priorities, complexity and work within a fast paced, dynamic environment
45

Electrical / Mechanical Resume Examples & Samples

  • Strong mechanical and electrical cable assembly and installation aptitude with demonstrated knowledge of basic hand tools and test equipment
  • Basic understanding of AC/DC Power/Grounding Principles
  • General knowledge of common information system (computer and network) hardware interfaces
  • Experience with interpreting engineering drawings and working with production work orders
  • Experience working in a multi-disciplined environment
  • Ability to maintain a wide variety of computer and laboratory systems and/or equipment, and must have a working knowledge of AC/DC Power and a basic understand Ohms law principles
  • Experience with assembling electrical cables and terminating MIL-STD and Commercial connectors
  • A record of successfully working in a process oriented teaming environment where a high degree of responsiveness and commitment to programs and customers has been demonstrated
  • Be proficient with Microsoft Office applications including Word, Excel, and Power Point
  • Active DOD Secret Clearance
46

Shift Electrical / Mechanical Engineer Resume Examples & Samples

  • Substantial experience in Building Services industry
  • City & Guilds parts1 & 2 or equivalent in electrical/mechanical discipline
  • Current Edition IEE: Wiring and Installation Regulations
  • Demonstrate a good understanding and be technically competent in all building services, in particular complex electrical systems and controls, UPS, generators, water treatment, refrigeration and air conditioning, Emergency Lighting and HVAC systems
47

Electrical / Mechanical Shift Engineer Resume Examples & Samples

  • C&G Electrical Theory & Installation
  • Fault-finding and practical skills
  • Experience in electrical generation ideal but not essential
  • Experience in large commercial / industrial boiler plant and associated equipment
  • Experience in overhaul of pumps, valves and pipe work ideal but not essential
  • Experience in Confined Spaces ideal but not essential
  • HV experience ideal
  • Able to work unsupervised and function as part of a team
48

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment
  • The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair
  • Basic welding skills preferred but not required. Familiar with pumps, both air and electric
49

Electrical Mechanical Maintenance Technician Resume Examples & Samples

  • Performs routine and extensive preventative maintenance and repair procedures on electrical and mechanical systems involving production equipment and plant systems, including the plant’s main power supply system
  • Performs minor and major repair of all buildings and equipment
  • Must have a working knowledge of relay logic and be capable of applying this knowledge in the troubleshooting of the PLC’s in the production equipment
  • Must have a strong understanding of NFPA 70E standards and be capable of applying these standards in the work situation
  • Calibrates and repairs pneumatic systems and other mechanical systems on production equipment to assure optimum performance of that production process
  • Maintains records of scheduled maintenance procedures
  • High school diploma or equivalent; Military training and/or Technical School preferred
  • 2-3 years of Electro-Mechanical Automation System Installation & Troubleshooting Experience. An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls and power transmission systems
50

Electrical Mechanical Controls Technician Resume Examples & Samples

  • Use structured problem solving techniques to troubleshoot and repair mechanical equipment including fillers, case packers, robotics, gear boxes, seals, bearings, hydraulic/pneumatic systems, and conveyors
  • Use structured problem solving techniques to troubleshoot and repair electrical equipment including motors, servos, motor control centers, variable speed drives, photo eyes, barcode scanners, proximity switches and transformers
  • Support IM Pillar processes by participation in FI's, Kiazens and IM Pillar team
  • Originate and help implement small turn-key controls / electrical / mechanical projects (develop controls code, schematics, wiring, fabrication and BOMs)
  • Proactively conduct equipment inspections and perform required preventive maintenance duties in accordance with recommended schedules
  • Replace worn components before equipment breakdown occurs
  • Drives root cause analysis on breakdowns (Breakdown Elimination) and promotes prevention of reoccurrence
  • Work with technical department and other cross functional groups to resolve maintenance issues, improve equipment reliability and minimize equipment downtime
  • Assist in creation and presentation of all standard maintenance best practices and help to educate plant personnel in those practices
  • Perform daily walkthrough of area observing, documenting and scheduling repair of any safety related problems as well as equipment abnormalities
  • Support, promote, and utilize computerized maintenance management system for all documentation and scheduling of events, and tracking of inventoried spares
  • Work independently and in a team environment while following safe and proper procedures with a high degree of quality, cleanliness, structure and reliability
  • Help ensure good communication of issues across shift change
  • Operates welder, drill press, cutoff saw, band saw, and other maintenance machinery and tools
  • Completes continuing technical education courses
  • Must be willing to work 12hr. shift and weekends. Overtime and on-call as needed
  • Minimum 2 years industrial maintenance experience or journeyman electrician (may be waived if candidate has formal training or similar experience)
  • Demonstrate a working knowledge of basic mechanical, electrical, and control principles
  • Must be hands on, independently perform multiple assignments and work as a team player
  • Ability to read and utilize schematic diagrams and equipment manuals for troubleshooting and proper installation
  • Ability to create and edit documents in MS Word and Excel, communicate via email, use computer system for parts check-in/out, complete work assignments and create work requests
  • Ability to clearly communicate ideas, clearly document technical situations, effectively train others, and interact well with others on every level of the organization
  • Associate must be able to meet physical demands for tasks/assignments such as use of power tools, climbing, lifting (50 lbs), etc
  • Experience in a manufacturing plant
  • Skilled in lubrication
  • Certified Welder
  • Journeyman electricians license
  • Ability to perform maintenance, programming, and troubleshooting on the Rockwell Allen Bradley control systems or similar
  • Ability to fabricate parts and tools, skilled at using a lathe and mill