Electrical Engineer / Systems Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical engineer / systems engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

C Smitham

Carol

Smitham

19989 Crystal Branch

Houston

+1 (555) 682 0264

19989 Crystal Branch

Houston

Phone

p +1 (555) 682 0264

Experience Experience

Phoenix, AZ

Electrical Package Systems Engineer

Phoenix, AZ

Ward-Mertz

Phoenix, AZ

Electrical Package Systems Engineer

Provide design and process leadership for a global team
Establish and maintain standard electrical component libraries to be used by the CS design teams in each of the global regions
Implement design changes as defined by the Project team
Interact with Commercial, Technical, Manufacturing, and Sourcing functions to produce control solutions
Be responsible for system design including power calculations, component selection, certification, layout and wiring drawing generation, and hardware Bill of Materials (BOM) development on assigned projects
Proficient in use of AutoCAD and AutoDesk Inventor software application for hardware arrangement and electrical wiring drawings
Frequently interact with customers and suppliers including support of on-site meetings

Houston, TX

Systems Engineer Iv-electrical System Engineering Group

Houston, TX

Anderson Inc

Houston, TX

Systems Engineer Iv-electrical System Engineering Group

Leading and developing electrical interface systems engineering products including ground trees, electrical interface function list, electrical services resource reports, electrical block diagrams, electrical interface circuit data sheets, power and energy models, and margin reports
Serves as flight project technical authority responsible for end-to-end flight system electrical and EMC design integrity crossing associated system and subsystem technical discipline boundaries including but not limited to electrical interfacing and grounding, avionics, power, pyro, harness design implementation, electrical test, and anomaly resolution
Leading and performing electrical interface and signal integrity tests
Leading, implementing, and improving the electrical interface circuit data sheet development process using Mentor Graphics Capital suite of tools
Leading and negotiating with teams of engineers across technical organization solving highly complex electrical interface and grounding flight system, instrument payload, and ground support equipment issues
Developing, specifying and reviewing electrical interface and signal integrity analyses, designs, test procedures, and trade studies
Defining and implementing the electrical flight systems engineering model based systems engineering product development process

present

New York, NY

Senior Systems / Electrical Engineer

New York, NY

Hane, Littel and Maggio

present

New York, NY

Senior Systems / Electrical Engineer

present

Uses computer assisted engineering and design software and equipment to perform engineering and design tasks
Participates in development of design process procedure and plan development of experimental test programs
Plans, develops, and participates in experimentation and tests related to product development
Develops designs for electrical subsystems for electrical components
Will lead electrical design team through development of detailed performance specifications and technical designs, identify and implement qualification and acceptance test plans, leads problem solving efforts, and interaction with customer and supplier technical leads
Performs other related duties as assigned
Generates and analyzes test data and reports to determine if design meets functional and performance specifications

Education Education

Bachelor’s Degree in Engineering Required

Harvard University

Bachelor’s Degree in Engineering Required

Skills Skills

Extensive understanding and wide application of advanced principles, theories, concepts and techniques in electrical interface systems engineering, hardware schematic analysis, electrical compatibility analysis, power design, wiring/cable design, electrical/EMC troubleshooting and test resulting in contributions to the development of new processes, tools, theories and methodologies
Advanced knowledge of applicable industry and/or academic practices and standards in electrical architecture development, electrical wiring design, avionics design, developing and monitoring System Technical resources and performing trade studies and/or spreadsheet analysis
Complete knowledge of Laboratory policies and procedures, NASA policies and procedures, and government regulations across a range of applications
Excellent interpersonal, oral, presentation and written communication skills
Ability to work in a multi-discipline environment with system and specialist engineers
Proven experience in leading an interdisciplinary team of system engineers involving spacecraft, instruments, and/or launch vehicle, mission operations, and science personnel
Strong negotiation and organizational skills
Ability to interact with external customers, external NASA centers, flight system managers, flight system engineering leads, subsystem engineers, element managers and line managers
Team player with excellent communication, interpersonal, and presentation skills
Ability to perform systems engineering functions at the system level design

Create a Resume in Minutes

15 Electrical Engineer / Systems Engineer resume templates

Read our complete resume writing guides

Senior Thermal Systems NPI Electrical Engineer Resume Examples & Samples

Bachelor's Degree in Engineering from an accredited university or college
Minimum of 8 years Electrical engineering experience including power generation equipment
Work experience with IEC, NEC and ATEX codes
Substantial experience with Electrical equipment within a plant – sizing, specification, and integration of related balance of plant equipment : switchyard, transformers, GCB, Network constraint, Grid code and Electrical protections
Innovation capacity & Team spirit to share experience with others are valuable factors also
Knowledge of Electrical Engineering & apprehension of the multi-disciplines interfaces
Experience in a project organization
Good integration and interaction in a global growth oriented environment with high complexity
Dynamism, Responsiveness & Involvement to satisfy our Customers’ needs are one of the essential values that employees have to demonstrate

Thermal Systems NPI Electrical Engineer Resume Examples & Samples

Minimum of 5 years Electrical engineering experience including power generation equipment
Master's Degree Engineering from an accredited university or college
Knowledge of international installation of power plants in 50hz & 60hz
Good attitude, self-starter, clear thinker, capable of identifying solutions to problems and driving them to prompt resolution
Strong written, oral and presentation skills
Electro-Mechanical training or work experience
General knowledge related to production, distribution and power evacuation of electrical energy
Familiarity with computer aided design tools such as ETAP & Easy Power
Dynamism, Responsiveness & Involvement to satisfy our Customers’ needs are one of the essential values that GE employees have to demonstrate
Six sigma certifications or equivalent quality certification

Electrical Package Systems Engineer Resume Examples & Samples

Apply electro-mechanical engineering principles and knowledge of industry standards to support system design, testing, and troubleshooting as part of a project team
Interact with Commercial, Technical, Manufacturing, and Sourcing functions to produce control solutions
Be accountable for project deliverables, customer requirement compliance, and timely schedule performance
Conduct Project Design Review meetings to assure system design compliance and quality
Minimum of 2 years of experience in a full-time Engineering position
Bachelors of Science in Electrical Engineering (BSEE) or Mechanical Engineering (BSME)
Minimum of 2 years of experience with control system design
Strong knowledge of industry codes and standards applicable to electrical systems (UL, NEC, NEMA, CE, ATEX, CSA, etc.)
Solid verbal and written communication skills
Demonstrated organizational, analytical, and problem-solving ability
Experience meeting and exceeding agreed upon goals and measurements with minimum supervision
Experience juggling multiple tasks successfully and working flexible hours
Experience working directly with customers and demonstrating a customer service mind set
Six Sigma Green Belt (GB), Black Belt (BB) or Master Black Belt (MBB) certified (GE employees only)

Electrical / Power Systems Engineer Resume Examples & Samples

Bachelor’s degree in electrical, power service, or other related engineering field
Experience developing electrical engineering packages for use in major systems
Experience performing studies for power systems, power flow, short circuit, protective devices coordination, arc flash engineering requirements
Travel up to 20%

Test Systems Development Electrical Engineer Resume Examples & Samples

Minimum GPA of 3.0 in BS Degree Program
Experience with digital and analog circuit design and documentation using CAD tools
Experience with lab equipment such as oscilloscopes, signal generators, and spectrum analyzers
Ability to troubleshoot electronic circuits
Good presentation, documentation, and communication skills
Ability to travel on occasion for up to 2 weeks
College courses in electromagnetics, antennas, wireless communications, signal processing
Understanding of RADAR principles
Experience with Mentor Graphics and MATLAB

Electrical Engineer, / Systems Engineering Resume Examples & Samples

Responsible for product conception, definition, design, release to manufacturing, and ongoing sustainment of oceanographic sensor platforms and/or system products
Implement processes to improve the new product development and product sustainment processes for platform and integrated system products within Sea-Bird Scientific
Develop, maintain, and execute detailed project schedules and budgets
Maintain existing products through allocating design and engineering time when needed to meet customer expectations. Coordinate these efforts with product managers, scientists, engineering peers, and manufacturing
Actively participate in design reviews and stage-gate reviews for both projects inside of, and external to Sea-Bird Scientific
Adhere to quality system requirements in the development of new products
Develop and foster contacts with customers, technical experts, dealers, sales people, and regulatory agencies
BS/BA in Engineering or the Sciences required. Electrical Engineering preferred
M.S. or Ph.D. preferred. Electrical engineering, robotics, physics, and oceanology are preferred disciplines
Demonstrable success in bringing to market test and measurement, ultra-low power, or high reliability products. Prefer a broad understanding of design, manufacturing, and market use of ocean products
Demonstrated ability to design, build, and test prototype electronic assemblies including active filters, data acquisition, power control, and environmental monitoring. Analyze and predict circuit performance using simulation tools. Develop test plans and fixtures for a production environment
Broad knowledge of C on embedded platforms both with and without a supporting operating system. Ability to write drivers for on and off chip peripherals
Familiarity with technical software tools and development environments including Subversion, JIRA, Orcad, IAR Embedded Workbench (for MSP430 and ARM processors), and Eclipse IDE
Knowledge of board layout techniques for precision analog designs
Understanding of requirements and design techniques for CE compliance
Expert skill with common electrical engineering tools including oscilloscopes, logic analyzers, spectrum analyzers, active loads, and soldering equipment
Knowledge of Linux and Linux system administration including writing scripts for automation of common tasks
Understanding of project management
Working knowledge of phase-gate new product development processes
Four or more years in a product development, engineering, or manufacturing environment, with at least two years of close involvement with product development or project management
Knowledge and use of personal computers, and common business productivity tools such as word processors, spreadsheets, databases, project scheduling tools, etc
Ability to utilize commonly accepted project management tools to assist in the development of, and adherence to a project schedule
Demonstrated ability in analytical thinking

Product Engineer Overhead Systems Electrical Components Resume Examples & Samples

Working knowledge of engineering and design for automotive interior injection molding and components (preferably styled parts)
Working knowledge of automotive electrical schematic drawings
Familiarity with the engineering design of compression molding
Familiarity with Design For Six Sigma process
Experience with DFMEA (Design Failure Mode and Effect Analysis), PFMEA (Process Failure Mode and Effect Analysis) and GD&T (Geometric Dimensioning and Tolerancing)
Knowledge of plastic materials, processes, and tooling
Experience with Statistics, Mechanics of materials, Design for Manufacture, and Integrated Design

Electrical / Power Systems Engineer Resume Examples & Samples

5 years relevant exempt experience
relevant BS/BA
relevant MS

Electrical & Electronic Systems Feature Engineer Resume Examples & Samples

5+ years of related experience in automotive engineering role
Electrical systems engineering experience including understanding of systems engineering V model
Electrical D&R (design and release) experience

Electrical Power Management Systems Engineer Autonomous Programs Resume Examples & Samples

Work with Feature Owners to identify the electrical power functional reliability and capability requirements
Translate the electrical power functional reliability and capability requirements for critical vehicle features into system specifications. Decompose those requirements to sub-systems and components as required
Work with the appropriate sub-system teams to develop the sub-system physical and functional hardware and software requirements
Work with the appropriate electrical system architects to ensure the electrical mechanization meet the system level requirements
Ensure that the defined electrical power generation & distribution system meets the functional reliability requirements of an autonomous vehicle and interacts correctly with other vehicle systems under all operating conditions
Create system DFMEA’s and ensure roll-down of DFMEA failure modes to associated subsystem DFMEA’s and PFEMA’s
Collaborate on system verification and validation plans/procedures
Work with component, systems, and vehicle engineering to ensure system/subsystem interfaces are working as defined
Supports the sourcing process with specification development and supplier technical reviews
Provide technical support throughout all phases of the vehicle program to ensure robust program execution and performance
Use change management process/tools for configuration management of specifications
Identifies, tracks and resolves engineering issues
Travel as required
Candidate must have one of the following engineering degrees: BS in Electrical Engineering, Aeronautical Engineering, Mechanical Engineering, or Computer Science Engineering
Working knowledge of Electrical Power Generation & Distribution Systems, including power converters, batteries, electro-mechanical devices, embedded control systems, and electrical control units
Working knowledge of vehicle development, integration, verification, validation and manufacturing processes
Understand hardware design and failure modes of Electrical Power Generation & Distribution Systems
Understand Systems Engineering methods and effective scoping of the required work products
Understand appropriate content for Vehicle and System Level Specifications
Understanding of system reliability, safety, monitoring, and diagnostic techniques and processes
Understand the capability and application of various analytical tools
High level of oral and written communication skills
High level of interpersonal skills to work independently and negotiate effectively with others to meet mutual goals
Ability to learn, apply knowledge and work independently with minimal supervision
Four or more years’ systems engineering experience with Electrical Power Generation & Distribution Systems
Understanding of EMC and susceptibility reduction techniques
Previous experience with DOORS
Previous experience with reliability analysis tools and methods
Understanding of ISO 26262 Functional Safety process

Secondary Systems Electrical Engineer Resume Examples & Samples

Secondary systems (protection and control) design
Undertake substation design without compromising on quality
Undertake design under the guidance and leadership of the Secondary Systems Lead Engineer
Participate as required in scoping and preparation of proposals
Preparation of SWMS and risk assessments
Undertake site visits during the project lifecycle
Interface and develop a healthy working relationship with Western Power Secondary Systems design engineers
Participate Safety in design workshops
Explore opportunities for innovation
Work with extended team of discipline engineers

Electrical Engineer Power Systems Resume Examples & Samples

BS Degree in an Electrical Engineering discipline
Advanced knowledge and experience in power systems, Arc Flash, NFPA 70E,power systems modeling motor and motor control, drive systems
National Electrical Code application experience
Ability to travel up to 50% of the time
Experience in the paper industry
Ability to provide consultation on complex projects as a top level contributor/Subject Matter Expert
Maintenance reliability experience

Systems Ops Electrical Engineer Resume Examples & Samples

Provide engineering/technical expertise and guidance in the identification, analysis and resolution of transmission system problems by conducting engineering and related studies
Study the effects of planned transmission and generation outages on the Duke Energy transmission system, develop switching plans for both planned and un-planned generation and transmission outages, and develop operating guides to mitigate contingency overload issues for planned or forced outages (coordinated with the Regional Transmission Organization)
Perform assessments, both internally and externally (RF/PJM) originated, of the transmission system using PSSE
Monitor the transmission system using the energy management system to gather real-time system information and ensuring the proper modeling of the transmission system
Conduct post-mortem analysis to investigate events that occur on the transmission system, resolving operating issues with wholesale, retail and municipal customers,
Support mitigation efforts for transmission line reliability/loadability issues making recommendations concerning operational/reinforcement strategies as needed
Support system operator certification technical training including simulation exercises
Provide transmission capacitor on/off set points per detailed analysis of transmission system in the area where capacitor is installed
Determine proper transformer tap settings for existing transformers
Provide emergency support during storms and operating emergencies as needed
Facilitate a better transmission system understanding between transmission planning groups and system operations group
Initiate capital projects based on real-time operations issues and engineering evaluation
Work closely with other utilities, ReliabilityFirst, PJM and various other electric market participants as required
Coordinate with PJM transmission operators to address any concerns they have on a daily basis
Provide updates to Operations Switching maps reflecting transmission line and equipment rating information
Update customer station switching instructions as needed by the operations center
State registration as a Professional Engineer
Working knowledge of Duke Energy transmission and substation equipment
Working knowledge of project management
Working knowledge of relaying systems

Electrical Engineer / Systems Engineer Resume Examples & Samples

2+ years of experience with DoD Defense Acquisition System (DAS) or Planning, Programming, Budgeting, and Execution System (PPBES)
Experience with using Visual Basic to write Microsoft Office embedded macros
BS degree in Engineering required
Experience in RF engineering, including CDLs preferred
TS/SCI clearance preferred

Senior Fuzing & Systems Safety Electrical Engineer Resume Examples & Samples

Review and disposition of subcontract data and change requests; preparing and presenting data to management, government agencies; and project cost account management
Frequently interface with the Customer to identify user needs
Design, analyze, test and evaluate safety systems
Develop Critical Item Development Specifications (CIDS)
Test data reduction
Supporting the generation of safety analyses as required to support safety organization requests
10 years of circuit design and analysis

Senior Systems / Electrical Engineer Resume Examples & Samples

Develops designs for electrical subsystems for electrical components
Confers with other Senior and Staff Engineers to prepare and document design modifications as required
Determines the technical feasibility of new product concepts, including response to RFI and RFQ. Prepares detailed project plans including technical objectives and approaches, design specifications, test specifications, schedule plans, project cost estimates and product cost analyses
Will lead electrical design team through development of detailed performance specifications and technical designs, identify and implement qualification and acceptance test plans, leads problem solving efforts, and interaction with customer and supplier technical leads
Uses computer assisted engineering and design software and equipment to perform engineering and design tasks
Develops design process procedures and prepares information as needed in the design documentation process
Prepares schematics, product and component related specifications, and bills of materials as needed
Directs and coordinate manufacture or building of prototype products and systems
Responsible for determining component requirements appropriate to product
Confirms availability and facilitate acquisition of new components for builds
Plans, develops, and participates in experimentation and tests related to product development
Generates and analyzes test data and reports to determine if design meets functional and performance specifications
Responsible for determining root cause of product nonperformance utilizing appropriate test equipment. May confer with research resources to clarify or resolve component problems
Develops, participates in and analyzes research to determine feasibility of proposed product specifications
Participates in development of design process procedure and plan development of experimental test programs
Develops test and designs process procedures evaluating test results for possible application to other products and/or systems
Provides high-level expertise, technical guidance and mentorship to less experienced engineers
Will initiate, recommend, or provide solutions through designated channels
Electromagnetic Compatibility (EMC) evaluation and countermeasure experience
Experience in analog circuit/mixed signal design (power supply, sensor interface, etc)
Working knowledge in Server architecture/data flow design for data systems
Working knowledge of Radar/Electronic Counter Measures (ECM)/Electronic Counter Counter Measures (ECCM) Systems processing concepts
Ability to work with Software (SW) and Hardware (HW) teams to enhance and troubleshoot the performance of a system
Experience in system level analysis and interface design work
Experience in working at the R&D level to test product and process concepts and theories
Experience at applying theoretical and practical Electrical Engineering knowledge and its application to requirements, problems, and tasks
Experience in Charged Particle Beams, and Lasers
Working knowledge of Radiation and its interaction with matter, and concepts for the radiation hardening of semiconductor devices
Proficiency with Microsoft Word, Excel, and PowerPoint, Electronic Design Automation and Technology Computer Aided Design Tools
Proficiency with Linux
Must be able to obtain a security clearance
PhD in engineering with experience in embedded system level analysis and HW/SW interface design, Reverse Engineering (RE) Concepts and practices, working knowledge of chemistry and Bio-engineering
Ability to write simple programs to assist with debugging/interfacing with system

Fuzing & Systems Safety Electrical Engineer Resume Examples & Samples

Apply or develop advanced fuzing technologies using scientific principles, theories and concepts to the weapon initiation systems for implementation into missile systems and space vehicles
Provide technical oversight to the subcontractor
Support the Safety Engineering organization by performing insensitive munitions and safety analyses and as needed and coordinate with the Government safety review boards
Manage the subcontract suppliers to specify and deliver required subsystem components on schedule and on budget
Develop initial safety system architectures and top level designs
Develop Statements-of-Work (SOWs)
Support fact-finding and contract negotiations
Ensure technical rigor and depth of all deliverables

Electrical Power Generation Systems Engineer Resume Examples & Samples

Experience assessing inefficiencies in generators and generator plants that have reduced availability and reliability
Strong background in Mobile and Stationary power plants, Automated Transfer Switches and associated switchgear and equipment
Must be able to travel to facilities within the continental US (CONUS), the territories of the US, Guam and Puerto Rico. Ability to travel: 30%
Review engineering packages and submittals provided by FAA contractors and vendors
Participate in preparation of briefings and white papers on a variety of power related issues that need to be briefed and reported to upper FAA management and executives
Assist in preparation of technical document requirements related to power systems that are being fielded
Participate in the review and rewriting of power systems related orders, standards and specifications
Participate in a wide variety of program management activities with FAA Organizations, Contractors, local authorities and the program office in the design, acquisition, implementation, project close out, testing and evaluation as tasked by the program manager
Work as a team member and be accountable for meeting the scheduled dates for tasked items
Assist in developing an action plan that can improve the system performance and reliability to support Air Traffic Operations without loss of service
Five years of experience in electrical power generation, stationary and mobile systems; deployment, maintenance, repair, and inspections
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience
Ability to install, remove, and operate electrical power generating and control systems, automatic transfer switches, and associated equipment
Knowledge of principles of electronics and electricity, including generation, conversion, transformation, distribution, and utilization
Interpret instrument and meter readings; wiring diagrams, schematics, drawings, and technical publications
Ability to identify types, capacity, and purpose of high and low voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution
Ability to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, and associated equipment. Performs inspections and interprets findings to determine corrective action
Ability to assess installed equipment for serviceability and to ensure compliance with publications, policies, and directives
Ability to furnish information for reports, and recommend changes to correct defective equipment or improve operating procedures

Electrical Metrology Systems Engineer Resume Examples & Samples

Maintain a laboratory quality management system that is compliant to ANSI/NCSL Z540.1 and ISO 9001:2008 or AS9100C:2009
Develop procedures and methods
Review, revise, document and maintain calibration systems and procedures and methods, based on principles of measurement science, technical analysis of measurement problems and accuracy per ANSI/NCSL Z540.1 and ISO 17025 requirements
Perform
7 or more years’ experience working in the field of metrology, in particular uncertainty analysis
7 or more years’ experience in Calibration and Metrology Laboratory management
5 or more years’ experience in electrical or RF engineering
Software development to automate calibration procedures
Previous experience developing technical customer relationships
Previous experience managing a certified/accredited calibration/metrology laboratory
Experience or certification in Statistical Process control

Electrical Engineer Iv-spacecraft Transmitter Systems Group Resume Examples & Samples

Applies wide ranging experience and advanced knowledge in field to derive and document assembly level engineering requirements, specifications and interface definitions
Partners with other engineers, project personnel and management to design and develop highly complex and critical electronics system architectures
Leads the development of highly complex and critical digital and/or analog circuit boards and assemblies
Applies extensive and wide ranging application experience to prepare significant requirements documents, interface agreements, verification and validation (V&V) plans, and risk mitigation plans and executes V&V plan
Leads subsystem and system level test and verification teams

Orion Spacecraft Electrical Power Systems Engineer Resume Examples & Samples

Support Orion EPS design, test and verification analysis, model development and execution using the Synopsys Saber tool
Provide technical oversight of Orion prime contractor design, implementation, and test and verification of EPS system
Power Quality analysis to provide system level verification of power quality requirements of EPS design including: system source and load impedance, system stability, transient response (nominal startup inrush, load steps), analysis fault protection and coordination as well as analysis support for design anomaly investigations
Provide technical assessment of EPS Power Quality and system performance concerns and issues, and provide potential solutions and recommendations to resolve any design or test related issues
Support development and review of Orion MPCV power quality requirement specifications
Support design validation and verification of the EPS Power Quality by performing nominal and EPS fault analysis and developing reports to be submitted for project documentation
Support EPS Test and Verification (T&V) activities including procedure development, review and hardware/software integration of the prime contractor’s Integrated Test Laboratory (ITL) and vehicle Operations and Checkout (O&C) power system configurations
Design, build, test and deliver special Power Quality test equipment needed to fully test and verify the Orion EPS architecture
Support the MPCV EPS System Manager (SM) during various EPS meetings and activities

Power Systems Electrical Engineer Resume Examples & Samples

You'll optimise electrical power systems to meet customer's requirements
Educated to degree level or equivalent in the electrical field with experience in electrical design techniques
Experience in electrical power equipment specification would be advantageous
Sound working knowledge of marine and electrical standards and regulations, i.e. Class Society rules

Avionics / Electrical Senior Systems Engineer Resume Examples & Samples

Develop and maintain insight into the Commercial Launch Provider (CLP) engineering and production through daily contact with peers throughout the CLP organization
Participate in selected reviews and activities at other locations (e.g., MIWG, Spacecraft-to-Vehicle Fit Check, CLP supplier product reviews)
Participate in the NASA-led Launch Campaigns by traveling to launch site as part of the engineering launch team or providing support to the engineering launch team from the resident office
Provide technical assessments of the test activity at the CLP and supplier locations. Participate in Test Readiness Reviews, observe testing and report issues and/or results

Systems Engineer Iv-electrical System Engineering Group Resume Examples & Samples

Leading and developing electrical interface systems engineering products including ground trees, electrical interface function list, electrical services resource reports, electrical block diagrams, electrical interface circuit data sheets, power and energy models, and margin reports
Developing flight system electrical interfacing, grounding, and power requirements, and their validation and verification method and procedures
Developing, specifying and reviewing electrical interface and signal integrity analyses, designs, test procedures, and trade studies
Generating electrical interface and signal integrity analysis results using SPICE, Matlab, MagicDraw, Capital analysis, and PCB analysis tools
Leading and performing electrical interface and signal integrity tests
Management of the electrical system engineering flight product deliverable schedule and receivables/deliverables
Overseeing partner implementation of electrical interface and grounding design requirements
Leading electrical, grounding, and power flight system trade studies
Reporting and presenting electrical, grounding and power issues, trades, status and results to flight systems engineering team
Leading and negotiating with teams of engineers across technical organization solving highly complex electrical interface and grounding flight system, instrument payload, and ground support equipment issues
Ensuring proper electrical interface and grounding requirement implementation in harness engineering design products, subsystem end circuit design implementation
Collaborating with EMC experts with issue resolutions, requirement specification and waiver mitigation
Managing flight system engineering change request orders
Serves as flight project technical authority responsible for end-to-end flight system electrical and EMC design integrity crossing associated system and subsystem technical discipline boundaries including but not limited to electrical interfacing and grounding, avionics, power, pyro, harness design implementation, electrical test, and anomaly resolution
Defining and implementing the electrical flight systems engineering model based systems engineering product development process
Leading, implementing, and improving the electrical interface circuit data sheet development process using Mentor Graphics Capital suite of tools
Bachelor’s degree in Electrical Engineering or related technical discipline with typically a minimum of 9 years of related experience; Master’s degree in similar disciplines with a minimum of 7 years of related experience; or PhD in similar disciplines with a minimum of 5 years related experience
Advanced knowledge and experience in one or more of the following areas: electrical interface systems engineering, electromagnetic compatibility, power engineering, aerospace engineering, systems engineering of system and subsystem level interfaces, requirements definition, flow-down, and verification of system level, subsystem level, or inter-subsystem requirements of Space Systems
Extensive understanding and wide application of advanced principles, theories, concepts and techniques in electrical interface systems engineering, hardware schematic analysis, electrical compatibility analysis, power design, wiring/cable design, electrical/EMC troubleshooting and test resulting in contributions to the development of new processes, tools, theories and methodologies
Advanced knowledge of applicable industry and/or academic practices and standards in electrical architecture development, electrical wiring design, avionics design, developing and monitoring System Technical resources and performing trade studies and/or spreadsheet analysis
Proven experience in leading high visibility extremely complex electrical interface compatibility, grounding, electrical fault propagation tiger teams
Proven experience leading system-level electrical systems, avionics engineering design teams and delivering electrical interface design products
Ability to work in a multi-discipline environment with system and specialist engineers
Proven experience in leading an interdisciplinary team of system engineers involving spacecraft, instruments, and/or launch vehicle, mission operations, and science personnel
Proven experience in defining, developing and verifying electrical interface requirements; performing interface and cross talk analyses; troubleshooting of issues related to grounding, EMI, signal integrity; developing and reviewing engineering products such as electrical interface control documents, electrical interface schematics, electrical block diagrams, ground tree diagrams, grounding analyses and technical specifications of harnesses; interface resource tracking and management
Proven experience implementing electrical architecture design optimization trade studies
Proven experience using ECAD tools for design and analysis
Proven experience in using circuit and system level electrical modeling and analysis tools
Proven experience working directly or as oversight function with industry partners
Ability to perform systems engineering functions at the system level design
Team player with excellent communication, interpersonal, and presentation skills
Ability to interact with external customers, external NASA centers, flight system managers, flight system engineering leads, subsystem engineers, element managers and line managers
Strong negotiation and organizational skills
Excellent interpersonal, oral, presentation and written communication skills
Complete knowledge of Laboratory policies and procedures, NASA policies and procedures, and government regulations across a range of applications
Recent flight system experience in electrical issue resolution and/or electrical anomaly investigations
Experience in requirements development and/or requirements management
Experience with state-of-the-art modeling methods and tools
Experience working with system contractors
Experience in developing and infusing electrical design CAD tools into flight projects or subsystems