Electrical Systems Engineer Resume Samples
4.8
(96 votes) for
Electrical Systems Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the electrical systems engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
RB
R Bernhard
Roslyn
Bernhard
8506 Dibbert Avenue
Dallas
TX
+1 (555) 708 6830
8506 Dibbert Avenue
Dallas
TX
Phone
p
+1 (555) 708 6830
Experience
Experience
Los Angeles, CA
Electrical Systems Engineer
Los Angeles, CA
Ritchie Group
Los Angeles, CA
Electrical Systems Engineer
- Performing component and sub-system design analysis and trade-off studies considering alternatives, size, power, performance and cost
- Manage projects to meet performance, schedule and cost goals
- Perform high-level system modeling and algorithm development in Matlab
- Work with a small team of researchers and engineers to design, develop and prototype RF/analog/digital devices and systems
- Expected to work in a safe manner in accordance with established operating procedures and practices
- Lead by example and promote Systems Engineering best practice. Mentor engineers and assist with development plans
- Develop module-based network topology
Los Angeles, CA
Senior Electrical Systems Engineer
Los Angeles, CA
Ullrich and Sons
Los Angeles, CA
Senior Electrical Systems Engineer
- Leading teams established by the project manager to conduct investigations of programmatic or technical problems and to make recommendations for recovery plans
- Providing technical consultation advice to project managers regarding design issues, development and test approaches, and test result assessments
- Provide technical consultation advice to Task Managers regarding design issues, development and test approaches, and test result assessments
- Analyze and perform testing and create test reports involving the control of robotic arms, liquid handling systems, and temperature and pressure controls
- Define, track, and communicate key project metrics and milestones; assisting in creation of project and design reviews and participation in engineering reviews
- Performing with minimal direction
- Responsible for the pre-contract electrical systems design and development in a conceptual way
present
Dallas, TX
Principal Electrical Systems Engineer
Dallas, TX
Daugherty, Hilpert and Prosacco
present
Dallas, TX
Principal Electrical Systems Engineer
present
- Mentoring and assistance with the development of junior team members
- Developing and fostering contacts with a view to generating your own revenue streams in the future
- Being competent to act as CRE for Earthing and Bonding and Stray Current works
- Developing & delivering HV earthing and bonding & electrical systems integration consultancy services both within the Atkins Rail business and in Atkins’ other business in the UK and around the world
- Perform system analysis, modeling, simulation and design in the application of electric machines, power electronics, control systems, harnessing and connection systems, and related electrical modules. These systems will be sized in the range of hundreds of watts to 60 kilowatts
- Identify and draft disclosures to capture intellectual property as discovered in the development of components and systems
- Capturing and managing change & supporting new work bidding activities
Education
Education
Bachelor’s Degree in Electrical Engineering
Bachelor’s Degree in Electrical Engineering
Strayer University
Bachelor’s Degree in Electrical Engineering
Skills
Skills
- Ability to work in an international team, autonomy and sense of organisation, quick understanding, stress resistance, available for worldwide business travels
- Ability to work independently and proactively and able to multitask multiple projects
- Experience using Solidworks for mechanical modeling is high desirable
- Knowledge of aerospace manufacturing processes/techniques
- Excellent relocation provided
- Low noise moderate bandwidth analog electronics; experience in design for electro-optical sensors is desirable
- Self-motivated and able to work independently with a positive attitude and highest ethics
- Strong written, oral, presentation and interpersonal communication skills. Be fluent in written and spoken English, and familiar with MS Office tools
- Knowledge of 3-D Computer Aided Design tools and/or other design methods
- Working knowledge of how to use should cost and estimating tools and developing cost models
15 Electrical Systems Engineer resume templates
Read our complete resume writing guides
1
Electrical Systems Engineer Resume Examples & Samples
- MSEE from an accredited college or university
- Strong Automotive Systems level and Module Design experience; from design of the system board to the introduction of additional add on components for various vehicle features
- Strong troubleshooting and problem resolution skill and experience with both automotive systems and diagnostic systems and software
2
Vehicle Evaluation & Verification Electrical Systems Engineer Resume Examples & Samples
- Knowledge of electrical vehicle systems preferred
- OEM or Tier 1 Automotive Experience preferred
- Experience with LABview preferred
3
Electrical Systems Engineer Resume Examples & Samples
- Project schedule coordination with the team
- Managing, tracking & developing system specifications / requirements
- Collaborating with internal customers and team members to develop software specifications
- Electronic hardware
- Bachelor degree (or equivalent) in an accredited Engineering, Computer Science, or Materials Science curriculum
- Relevant work experience required: 5+ years experience developing and validating embedded control system applications
- Excellent organization, analytical and communication skills
- Desire to work in a team environment
- Emphasis on initiative and self-starting tasks
- Master degree (or equivalent) in an accredited Engineering, Computer Science, or Materials Science curriculum
- Knowledge of direct injected diesel engines
- Knowledge of PC tools such as Visio, MSOffice
- Knowledge of Diagnostic and Event systems
- Knowledge of Service tools, SCII (data loggers), Matlab, Vector based development tools and displays
4
Electrical Systems Engineer Resume Examples & Samples
- Experience in designing for operation in a space radiation environment is required
- System partitioning of analog vs. digital. vs. software functions
- Specification development
- Design review presentations
- Test planning
- Low noise moderate bandwidth analog electronics; experience in design for electro-optical sensors is desirable
- Digital processing/FPGA program design
- Design and analysis for EMI/EMC compliance
- DC-DC converter design
- New business development support
- Subcontractor technical oversight
5
Global Ford Performance Electrical Systems Engineer Resume Examples & Samples
- Lead system level design for new / modified electrical features
- Develop electrical architectures within existing vehicles to support new features, Functional feature portioning, Control strategy, HMI development, etc
- Collect and manage electrical device transmittals (DT’s)
- Lead development and delivery of logical schematics to the EDS team so that wire harnesses can be developed
- Work with component suppliers and Netcom to develop Network communication message list to support the new features and content
- Manage EE System level attributes: Key Off Load and Charge Margin
- Interface with the core electrical functional teams (EESE and others, e.g. Instrument Clusters, Switches, Audio, Powertrain, etc.)
- Deliver all components and systems with quality that meet the program function, cost, weight and timing requirements
- 3+ years of Electrical Systems Engineer –OR- vehicle level electrical systems design and development experience
- BSEE or Engineering Degree
- 3+ years of Electrical Design and Release experience preferred
- 2+ years of experience using CANalyzer, Diagnostic Engineering Tool(DET), and/or Intrepid tools
- 2+ years of experience with safety regulations / requirements
- 2+ years of WERS experience
- 2+ years of working with Ford GPDS system
- Masters Degree in Engineering, preferred
- 2+ years of Launch Experience Preferred
- 2+ years of experience in WERS, Word, PowerPoint, Excel
- Positive attitude willing to work in an exciting, fast paced environment on exciting new Performance Products
6
Electrical Systems Engineer Resume Examples & Samples
- Develop innovative new system and component requirements, distribute function and performance to components within systems, define system hardware and software architecture, define electrical and communication interfaces for components to meet those goals
- Perform and lead ideation, analysis, design, development, test and installation tasks and programs to meet project deliverables
- Investigate, learn and evaluate current and emerging technologies for possible use in related projects
- Design, specify and develop electrical sub components and embedded systems for integration into elevator and escalator systems, including programming and controls
7
Electrical Systems Engineer Resume Examples & Samples
- Provide technical support for existing products including PCB design and manufacturing data updates
- Develop and execute tests to ensure robust implementation and compliance to requirements
- Serve as key contact for root cause analysis and corrections for field and factory electronics hardware returns
- Support system level integrations and testing of connectivity products that transmit data and voice over phone line, cellular and/or internet to backend service systems
8
Senior Electrical Systems Engineer Resume Examples & Samples
- Develop innovative new sub-system requirements, distribute function and performance to components within systems, define component hardware and software architecture, define electrical and communication interfaces for components to meet those goals
- Perform and contribute to ideation, analysis, design, development, test and installation tasks and programs to meet project deliverables
- Design, specify and develop electrical sub components and electro-mechanical sub-components for integration into elevator and escalator systems, possibly including programming and controls
- Actively engage in rapid prototyping, deployment and testing methodologies and practices
- Make significant contributions to cross functional project teams by working collaboratively, skillfully solving problems, managing complex components of large projects and completing multiple assigned tasks
- Develop component level risk analysis as appropriate. Proactively mitigate project risks
- Define, track, and communicate key project metrics and milestones; assisting in creation of project and design reviews and participation in engineering reviews
- Develop and evaluate abstract ideas and concepts
9
Electrical Systems Engineer Resume Examples & Samples
- Lead resolution of design and manufacturing issues at prototype and pre-production events
- Lead trade off analysis of features to meet cost, weight, and energy management target
- Ensure vehicle bench marking data is fully considered for electrical system definition
- Lead selection of electrical architecture and feature partitioning as it applies to a particular vehicle
- Create network communication and power supply requirements in early program development
- Lead functional integration of all electrical features on a vehicle program
- Ensure electrical system quality history issues and FMEA items are addressed in new design
- Lead development of vehicle-specific electrical schematics
- Develop module-based network topology
- Develop bridging part plan for prototype builds
- Manage CAE and analytical test plan for the electrical system to completion Lead compatibility reviews to verify all module and wiring interfaces
- Lead technical design reviews at engineering milestones
- Lead AVBOM and Change Control processes
- Lead the sourcing process and associated CPA agreements to completion
- Administer electrical systems PV plan at pre production builds and lead resolution of open issues
- Support all in-plant build events as required
- Support development of the in-plant end-of-line configuration files and support pre-build verification
- Ability to communicate and interact with others
- Conduct training of in-plant repairman and operators Review/sign off service documentation
- Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Science
- 1+ years of experience in systems engineering and product development
- Master’s degree in Electrical Engineering, Mechanical Engineering, Computer Science
- 3+ years’ of experience in systems engineering
- 3+ years’ of experience in product development experience
- Proficient in using electrical system-related vehicle diagnostic tools & equipment
- Excellent English skills (Oral, reading, writing and listening)
10
Electrical Systems Engineer Resume Examples & Samples
- Electrical skills, running wiring to new machinery
- Trouble shooting electrical equipment
- Communicate with several departments on equipment issues
- Send out an end of shift daily report
- Make recommendation on cost saving opportunities by reducing energy consumption
- Working closely with the machinist department
- Preforming preventive maintenance of the equipment
11
I & R Principal Electrical Systems Engineer Resume Examples & Samples
- Develop innovative new electrical systems and components, distribute function and performance to components within systems and define electrical and communication interfaces for those components to meet design goals
- Design, analyze, and specify electrical system architecture: including embedded systems, discrete control, sensors, actuators, and network connectivity for integration into elevator and escalator systems
- Provide global strategic and tactical direction for the development of electrical systems, projects and programs in the area of elevator and escalators
- Lead and contribute to design reviews for development efforts that are either significant in scope, or span multiple components
- Perform and lead ideation, analysis, design, development, test and installation tasks, teams and programs to meet project deliverables
- Investigate, learn and evaluate current and emerging technologies for possible use in related projects. Including leading technical teams in similar activity
- Skillfully solve problems, own projects and pro-actively manage project teams
- Develop system-level risk analysis as appropriate. Proactively mitigate project risks
- Define, manage, track, and communicate key project metrics and milestones; includes facilitation of project and design reviews and participation in engineering reviews
12
Global Ford Performance Electrical Systems Engineer Resume Examples & Samples
- 3+ years Electrical Systems Engineer –OR- vehicle level electrical systems design and development experience
- Bachelor of Science in Engineering degree required
- 3+ years Electrical Design and Release experience preferred
- 2+ years’ experience using CANalyzer, Diagnostic Engineering Tool(DET), and/or Intrepid tools
- 2+ years’ experience with safety regulations / requirements
- 2+ years WERS experience
- 2+ years Launch Experience Preferred
13
Electrical Systems Engineer Resume Examples & Samples
- Work with a small team of researchers and engineers to design, develop and prototype RF/analog/digital devices and systems
- Design, build and test prototype electronic solutions that include functions such as graphics processors, CPUs, control/drive electronics, feedback systems, environmental monitoring, power conditioning
- Architect and simulate system design using ICs/FPGA/microcontrollers, generate schematic, timing diagrams, PCB layout and signal integrity
- Work with board and assembly house for manufacturing and assembly
- Perform high-level system modeling and algorithm development in Matlab
- Conduct design reviews with technical peers
- Generate test plans/procedures, perform testing, and evaluate test results
- Create and maintain design documentation that describes architecture, theory of operation, functionality, performance including margins, design trades, and testing results
- Resolve complex technical problems and address design challenges using an interdisciplinary approach that utilizes skills in multiple technical areas
- Meet project schedules and deadlines
- 7+ years of experience as an Electrical Engineer, Electronics Engineer, Electrical Design Engineer RF Engineer or related title
- BS degree in Electrical Engineering is required, advanced degree is desired
- Design experience with analog, digital, and RF circuits is required
- Experience running multiple product development cycles which include design, prototype fabrication/manufacturing, assembly, testing, debugging, etc
- Experience using programming languages/tools such as Matlab, C, C++ and /or python, etc
- Design experience with remote sensing, DSP, and computing algorithms
- Experience using version control systems and defect tracking software is preferred
- Proficiency with embedded control systems and debugging system performance is required
- Proficiency with test equipment (oscilloscope, spectrum analyzer, logic analyzer, vector network analyzer)
- Proficiency in use of electronics lab hand tools (Soldering and rework)
- Experience using Pspice, Cadence (Orcad, Allegro) design tools for circuit schematic generation
- Experience using Altium or other board layout tool
- Hands on experience working with Microcontrollers and FPGA
- Knowledge in peripheral buses I2C, USB, SPI
- Ability to work independently and proactively and able to multitask multiple projects
- Knowledge of optical systems design
- Knowledge of image processing requirements
- Knowledge of mechanical modelling and design processes, especially for consumer-class devices
- Using EM Field simulation tools such as HFSS, CST
- Experience using Solidworks for mechanical modeling is high desirable
14
Lead Electrical & Systems Engineer Resume Examples & Samples
- Leads electrical and system engineering activities for three phase power conversion products from above 200 kVA
- Champions innovative solutions to semiconductor device, power electronics topology, magnetics, thermal, and digital
- Designs and develops power converters and electrical systems for uninterruptible power systems and accessories
- Technical leader for new product development projects (uninterruptible power systems and other power quality products)
- Evaluates alternative design solutions to meet product development requirements factoring in performance, cost and
- Interfaces with factory, service and product engineering departments
- Supports factory introduction and field deployment of new products
- BS in Electrical Engineering from an accredited institution with minimum 6 years of industry work experience in electrical
- Master’s Degree in Electrical Engineering
- Solid background in the field of power electronics and control algorithms
- Experience developing control platforms using hardware description languages such as Verilog or VHDL
- Proficiency in using simulation tools such as Matlab/Simulink, PSpice, etc
- Experience interacting with Global teams
- Knowledge of high power product design considerations preferred (200 kVA to 1 MVA)
- Ability to evaluate and design higher level system architectural considerations involving electrical, software, and mechanical cross-disciplinary principles
- Excellent communications skills
- Good understanding of control of power electronics and/or motor drives
- Ability to demonstrate problem solving using logic and methods to solve difficult problems with effective solutions
- Ability to demonstrate process management and figure out processes necessary to get things done
- Ability to demonstrate technical learning and can learn new skills, knowledge, industry, product or technical knowledge
15
Lead Electrical Systems Engineer Resume Examples & Samples
- Analyzes and simulates power electronics systems including, analog, logical, and digital electronics
- Technical leader for special projects in the division, responsible for meeting schedule, cost and product performance goals
- Evaluates alternative solutions to satisfy emerging customer wants and needs. Proposes technology roadmaps and development initiatives
- Reviews product development requirement specifications including product management and customer requirements. Writes and maintains functional specifications of design solutions
- Keeps track of latest power electronics, embedded software and controls strategies. Applies knowledge to power electronics applications
- Fosters an environment that promotes Eaton’s goals, philosophies, and encourages continuous improvement
- BS in Electrical Engineering from an accredited institution with minimum 6 years of industry work experience in electrical product development. OR MS in Electrical Engineering from an accredited institution with minimum 4 years of industry work experience in electrical product development
- Must live within a 60 mile radius of the work location. No relocation benefit is provided
- Strong knowledge of Design for Six Sigma concepts
- Experience with power electronic utility interface
- Systems engineering experience with complex electrical systems
- Self-motivator and self-starter skills
- Ability to demonstrate creativity and innovation leadership, is able to come up with and productize new and unique ideas
16
Senior Electrical Systems Engineer Resume Examples & Samples
- Has knowledge and experience in development and design of electro- mechanical systems, Including the wiring, relay logic and control
- Knowledge of elevator and/or escalator systems and components strongly desired
- Experience in the development of electronic, multi-physics and safety systems preferred
- Experience with embedded systems, software design, controller architectures and control algorithm design techniques desired
- Experience with data acquisition, signal analysis and data processing
- Experience understanding and interpreting codes and standards
- Ability to work effectively in a diverse and dynamic work environment
- Ability to travel globally as required
17
Connectivity Electrical Systems Engineer Resume Examples & Samples
- Design and development of electronic systems and components to support elevator connectivity initiatives
- Create supporting technical documentation including hardware design plans, design requirements, functional specifications, user documentation, qualification test plans and reports
- Hands-on electrical engineering and product design experience working within multi-disciplinary teams
- Lab experience with electronic circuits and test equipment to support test and integration
- Architecture development and circuit design utilizing software, I/O, memory, peripheral components and communications
- Circuit simulations to support development and analysis
- Serial communication standards and protocols such as CAN (Controller Area Network), RS422, Ethernet
- Good interpersonal skills and ability to work with individuals and/or teams at all levels and disciplines
- Knowledge of analog phone line (PSTN), cellular (3G, LTE), Bluetooth, and WiFi technologies
- Voice/video systems and related technologies
18
I & R Principal Electrical Systems Engineer Resume Examples & Samples
- 7-10 years or more of directly applicable experience is required
- Expert knowledge and experience in electrical system architecture, including embedded hardware and software
- Knowledge and experience in development and design of electro- mechanical systems
- Knowledge of elevator and/or escalator electrical systems and components strongly desired
- Ability to understanding and analyze electrical control algorithms desired
- Previous design leadership for the development of electronic, multi-physics, safety-critical systems
- Experience in system-level design tools, including state machines, flow-charts, functional specification, fault tree analysis, and failure mode and effect analysis
- Ability to work effectively and influence others in a diverse and dynamic work environment
- Strong analytical and strategic thinking skills
- Strong organizational skills with attention to detail, task driven planning, and ability to manage multiple priorities
19
Electrical Systems Engineer Resume Examples & Samples
- Embedded electronics development experience; preferably safety electronics
- Highly organized with good oral and written communication skills
- Ability to develop requirements utilizing PC level tools
- Ability to read and interpret electrical schematics, component specifications
- Ability to perform ECU level troubleshooting
- Ability to read and understand high level SW models and code
- System Modeling and Functional Analysis Methods
- FMEA / FTA’S
20
Facilities Electrical Systems Engineer Resume Examples & Samples
- Participate in site surveys and make recommendations for facility electrical infrastructure
- Support Architect/Engineering (A/E) contractors facility design effort
- Prepare Statements of Work and support Best Value Source Selection
- Resolve field issues including coordination with home office engineering, equipment suppliers, and onsite teams
- Work with Raytheon, Government, and subcontractor teams
- Four (4)+ years of experience as an Electrical Engineer working with infrastructure and/or building systems
- Experience with codes and standards such as ANSI, IEEE, NFPA
- Security Clearance: Secret (existing or ability to secure)
- 3-4 years of experience working for a consulting engineer or engineer/architectural firm designing electrical systems for facilities/buildings
- Familiarity with data processing and/or communications facilities
- Substation Design Experience
- SKM or Easypower for arc-flash and short-circuit study
- Proficient with MS Project
21
Electrical Systems Engineer Resume Examples & Samples
- Analyzing unit failures and developing corrective actions
- Debugging/Testing all parts of analog & digital designs
- Evaluating production partners (local and offshore), including quality of work assessments
- Manage vendor issues. Verify compliance with quality standards
- Evaluating end-of-life and component change notifications and sourcing alternate components
- Maintaining configuration management of HW items
- Creation of clear and concise HW specifications, design documentation, HW-related detailed design documentation, BOMs and Parts Lists, verification tests and reports
- Review and evaluate supplier/vendor documentation and provided suggested courses of action to upper management for all HW-related components
- Work closely with CAD designer, board fab & assembly vendors
- Implement modifications to automated test equipment and test software
- Assist new product development through participation in
- Design and develop analog & digital hardware
- Implementing analog & digital designs using schematic capture software tool (Orcad) which include generating net lists, parts lists and printed circuit board layout
- Design layout, component placement and trace routing
- Developing guidelines for board layout
- Design and develop analog & digital hardware OR reviewing the designs/products from vendors
- Work closely with CAD designer, board fab & assembly vendors Process and release schematics, drawings and documentation thru configuration management
- Active participant in the design layout phase including component placement and trace routing. Be able to write guidelines for board layout
- Extensive hands on experience for debugging and testing all parts of analog & digital design
- Guide Mechanical design for enclosures
- Create clear and concise HW design documentation, specified or derived requirements from customer-level documentation, schematics, detailed design, BOMs and Parts Lists, verification test plans and reports
- Familiar with Compliance standards (MIL, SAE, FCC, EN)
- Evaluate unit failures and implement corrective actions
- Evaluate component product change notifications and source alternate components
- Process and release schematics, drawings and documentation thru configuration management
- Experience in digital board development using CPLD, clocks, switches
- Experience with Xilinx/Altera CPLD tools
- Experience implementing serial communications interfaces (such as CAN, USB, I2C, SPI, RS232 & RS485)
- Experience implementing audio amplifier circuit and analog board design
- Experience implementing switching power supply design of DC/DC converters
- Experience with schematic capture software ORCAD
- Awareness of signal integrity and EMI/EMC issues
- Experience with thermal design and heat sinks
- Experience using scope, logic analyzer
- Experience in a production support role, electronics manufacturing or automated test design
22
Senior Electrical Systems Engineer Resume Examples & Samples
- System integration experience of embedded systems with electronics, firmware, and software
- FPGA/CPLD implementation and algorithm review experience
- Mixed signal EE design experience at either the PCB or IC level
- Signal timing diagrams and power on/off sequencing
- Power converter circuit design and analysis
- Experience with simulation tools such as Matlab, Cadence, SPICE, or Ansoft
- Hands on lab experience for data analysis and debugging
- Familiarity with software code review and modification
- Familiarity with design for manufacturing
- Scripting or Automation is a plus
23
Electrical Systems Engineer Resume Examples & Samples
- Has completed electronics projects that include the schematic capture and PCB layout
- Mixed signal EE design experience at the PCB level
- Select EE components, guide schematic & PCB layout teams, and analyze prototype performance
- CPLD implementation experience is a plus
- Embedded systems firmware or software programming is a plus
24
Assistant Electrical Systems Engineer Resume Examples & Samples
- Design; calculations, drawings and assurance for assigned projects
- Project engineering of work packages
- Site works
- Report writing
- Client engagement activities from the outset, including attending project meetings, issuing project updates
- Planning, procuring, management and implementing of works
- Safety and technical assurance including EMC (electromagnetic compatibility) and high voltage earthing
25
Senior Electrical Systems Engineer Resume Examples & Samples
- Oversee development of hardware and software through delivery and lead testing and integration thru I&T
- Support development of GPS system, thru strong leadership to coordinate efforts of different vendors and Project Team
- Conduct subsystem assessments and making recommendations to the project
- Review documentation, attending reviews, resolving issues and reporting results
- Support CDR, PDR, and other program reviews, and reviewing deliverables
- Provide technical consultation advice to Task Managers regarding design issues, development and test approaches, and test result assessments
- Bachelor of Science degree, or equivalent education and experience, in Aeronautical or Electrical Engineering, Physics, Mathematics or Computer Sciences from an accredited institution
- 15 or more years of spacecraft design and development experience, including at least 5 to 10 years of GPS system, requirements, developing functional performance requirements
- A solid understanding of space hardware, electrical, electronic and mechanical systems design
- Must be able to review and understand detailed circuits and analysis
- Must have strong organizational and multi-tasking skills
- Possess strong interpersonal skills and be able to work with a diverse group of contractor and Government personnel
- Must be a US citizen with ability to pass a Government background investigation
- Available to start soon full time with quick ramp-up
- Excellent organizational, leadership, and verbal and written communication skills
26
Senior Electrical Systems Engineer Resume Examples & Samples
- Leads electrical and system engineering activities for advanced mission critical power products under the direction of the Office of Chief Engineer
- Mentors, assigns tasks and determines priority for project team members as needed
- Reviews product development requirement specifications including product management and customer requirements
- Writes and maintains functional specifications of design solutions
- Applies Design for Six Sigma principles as part of the development process
- Listens to and understands the “Voice of the Customer”
- Proven track record for leading project teams
- Strong communications skills
- Strong understanding of control of power electronics and/or motor drives
27
Electrical Systems Engineer Resume Examples & Samples
- Assess the operational status of Superchargers and diagnose problems remotely by analyzing data collected by vehicles and charging stations
- Identify and collaborate on the design of new features for Tesla vehicles and charging equipment based on strong core competencies at the system level, how customers interact with the product, and the needs of service
- Work across internal departments to ensure new types of issues are investigated and that countermeasures are being appropriately implemented
- Develop and sustain improved processes to enhance field reliability and minimize service costs. Provide technical support to field engineers, technicians, and front-line customer support personnel who are diagnosing and repairing remote equipment
- Be ready to identify and solve problems across a varied range of specialties such as electro-mechanical devices, thermal systems, power electronics, embedded firmware, computer software, wireless connectivity and networking equipment
28
Electrical Systems Engineer Resume Examples & Samples
- Knowledge of aerospace manufacturing processes/techniques
- Analytical problem solving skills combined with engineering background
- Understanding of build sequence for aircraft parts
- Working knowledge of how to use should cost and estimating tools and developing cost models
- Understanding of the cost & design trades required to develop and document complex mechanical systems
- Knowledge of 3-D Computer Aided Design tools and/or other design methods
- Self-starter who is not afraid to proactively seek information and direction to successfully complete the statement of work
- Strong written, oral, presentation and interpersonal communication skills. Be fluent in written and spoken English, and familiar with MS Office tools
- Self-motivated and able to work independently with a positive attitude and highest ethics
- Must be able to work collaboratively with very strong teaming skills. Must be willing to work flexible hours (early or late as needed) to interface with Boeing personnel around the world
- Bachelor’s degree with 7-10 years’ work experience is must
- Equivalent education in Mechanical or Electrical Engineering is preferred
- Work experience in value engineering and reverse engineering is preferred
- Demonstrated capability in performing equipment teardown and should cost analysis
29
Electrical Systems Engineer Resume Examples & Samples
- Perform engineering and technical tasks as assigned by supervision applying general engineering principles
- Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures
- Must have good grasp of techniques and a good understanding of the fundamental functions performed by the group
30
Electrical Systems Engineer Resume Examples & Samples
- Developing and enhancing electronic systems through systems architecture, requirements and interfaces
- Customer interfacing to discover stakeholder requirements and deliver solutions
- Developing and validating systems that meet requirements, reduce cost, improve performance, and are delivered on time and budget
- Performing component and sub-system design analysis and trade-off studies considering alternatives, size, power, performance and cost
- Interacting with vendors and executing contracted agreements supporting development of technology or products
- Identifying and resolving issues throughout the development life cycle
- Planning and coordinating testing to ensure products meet requirements
- Manage projects to meet performance, schedule and cost goals
31
Avionics & Electrical Systems Engineer Resume Examples & Samples
- Generate wiring diagrams, wiring routing schematics, component installation drawings and other type design data required to support STC projects
- Assist installation technicians in troubleshooting installation wiring interconnects
- Assist in preparation and verification of new installation documentation
- Assist in generation of certification ground and bench tests plans
- Assist in creation of certification test reports and other compliance data for submissions to the FAA
- Detailed working knowledge of aircraft wiring diagrams, wiring routing drawings and the content required on those drawings for FAA certification
- Demonstrated solid understanding of commercial avionics interface standards and their installation
- Must possess proficiency in AutoCAD and Microsoft Office products
- Must be detail-oriented and have the ability to work proactively and effectively with minimal supervision
- Ability to prioritize and multi-task in a flexible, fast paced and challenging environment
- Demonstrated strong and effective verbal, written, and interpersonal communication
32
Principal Facilities Electrical Systems Engineer Resume Examples & Samples
- Develop one line diagrams for notional facility electrical power systems
- Provide power systems criteria for Facility Requirements Documents
- Review/comment on A/E Design Analysis, calcs, drawings and specifications
- May lead and guide technical teams in the design/development/implementation of infrastructure/building electrical systems
- Eight (8)+ years of experience as an Electrical Engineer working with infrastructure and/or building systems
- Medium and Low-Voltage Distribution Equipment Design/Installation experience
- Experience with equipment and facility grounding
- Full cycle project experience: scope research, design (electrical, floor plan, cost estimating, specifications), bid, construction administration, and commissioning
- Experience with Microsoft Office software; Word, PowerPoint, Excel
- AutoCAD Experience
- U.S Citizenship is required
- 5+ years of experience working for a consulting engineer or engineer/architectural firm designing electrical systems for facilities/buildings
- Building Management Systems knowledge
- Knowledge of Fire Protection Systems
- Military contract knowledge
- Bachelor of Science Degree in Electrical Engineering/Facilities Engineering
33
Senior Electrical Systems Engineer Resume Examples & Samples
- Demonstrate creativity in problem solving, ability to think out-of-box, and adapt quickly to new technical areas
- Promote innovation and new technology to further enhance Apple's display performance and user experience
- Create and give presentations before and after prototyping new ideas
- Analyze the trade-offs between performance, manufacturability and cost
- Communicate and demonstrate prototypes to Cross-Functional Teams
- Work with Display EE component and panel vendors to solve electrical & optical related issues
- Write detailed EE Specifications for System, IC, PCB, Firmware, and Software design
34
Avionics Electrical Systems Engineer Resume Examples & Samples
- Help set design requirements
- Generates Type Design data as well as validation such as SSA’s and ELA, EMI and FT test plans
- Capable of development into CVE
- Assist in developing EASA/FAA Certifiation Plans
- Assemble required deliverables for the project
- Coordinate data transfer and deliverables for the project
- Interface with EASA/FAA/Client/Internal engineers/suppliers
- Provide project guidance toward successful solution
- Primary Point of Contact for all project correspondence
- Responsible for project schedule, costs, scope and setting resource requirements
- Responsible for work change requests
- Responsible for maintaining an project Action Item Log
- Responsible for weekly progress report and coordination call with Client
- Responsible for weekly progress report and coordination call with Management
- Administrative over site of resources assigned to the project
- Support Sales/Contracts with pre-sales discussions as well as commercial and technical proposals and project plans
- Support Finance with revisions to planned costs or billing milestones
- Project Management training and development
- Bachelor of Science in engineering required
- Master's degree in engineering or equivalent experience preferred
- Sound knowledge of engineering theory and design criteria
- 8+ years experience in increasingly complex supervisory positions
- 10+ years of experience of transport or military aircraft structural analysis or in related field
- 10+ years of experience on multiple aircraft types and systems
35
Team Leader & Principal Electrical Systems Engineer Resume Examples & Samples
- Leads encoder product development teams, typically consisting of firmware, electrical, optical, mechanical, manufacturing, and test engineers to develop and deliver market-leading new optical encoder products and motion control solutions
- Designs cutting edge analog and mixed signal circuits at the board level
- Technical lead for system design and integration decisions, balancing complex technical and commercial tradeoffs between multiple technologies
- Establishes and executes the technical development plan, process, and design strategy in accordance with a defined stage gate process
- Manages technical and programmatic risk, ensuring effective risk identification, assessment, and mitigation
- Effectively communicates activity status, issues, and mitigation plans with key stakeholders
- Designs experiments and qualification/test plans for new designs
- Works with cross-functional project teams to ensure successful transfer to manufacturing
- Engages in research, works with product management team to explore emerging technologies that could be applied to deliver innovative new products
36
Senior Electrical Systems Engineer Resume Examples & Samples
- Using your previous experience as a successful Electrical Engineer in developing designs that balance the trade-offs between cost, risk, and time to market
- Drive embedded design of custom electrical systems to meet product and cost requirements
- Manage and prepare technical designs documents and bills of materials
- Communicate project status
- Provide system engineering support for technical challenges
- Accountable for safety, regulatory and standards compliance
- Bachelor’s Degree in Electrical Engineering with 5+ years of previous design experience as a successful engineer in electronics, optical, barcode and/or image sensor technologies
- Good practical knowledge of both digital and analog electronics
- Proficiency with oscilloscopes, network analyzers, spectrum analyzers, and signal generators
- FCC certification procedures and engineering methods to repair them
- Must be a self-starter and well organized
- Must be able to function well in a team or group environment
- Ability to function in a fast-paced, dynamic environment with flexibility
- Troubleshooting ability with embedded systems
- Use of electronic diagnostic equipment such as DMM, oscilloscopes, logic analyzers, etc
- Standard communication protocols (CAN, Ethernet, I2C, SPI, XY2-100, etc.)
- PCB layout techniques that minimizes noise and EMI
- Electronics CAD software such as Altium, and OrCAD capture
- Component placement and electrical routing with Altium a plus
- Experience designing with DFM principles in mind a plus
- Have the ability to work cross-functionally with other program managers, sales, engineers and operations teams
37
Advanced Powertrain Electrical Systems Engineer Resume Examples & Samples
- Minimum 1 year of experience preferably in electrical systems design and development. An advanced degree and/or academic research in a related field may count towards experience requirement
- Experience with automotive powertrain software and hardware
- Experience with vehicle electrical architecture and wiring schematics
- Experience using automotive communication protocols such as CAN, LIN, SPI
- Electrical knowledge with the ability to navigate electrical schematics and utilize digital volt ohmmeters / oscilloscopes for troubleshooting electrical and electronic systems
- Basic understanding of electronic management systems for powertrain systems as well as the fundamentals of internal combustion engine operation
- Familiar with FCA operating systems and fuel systems engineering
- Supplier management skills
- Comfortable preparing and presenting to all levels of management
- PentaSAP knowledge
- MATLAB / SIMULINK experience in a controls environment
38
Junior Electrical Systems Engineer Resume Examples & Samples
- Responsible for integration and test of various flight and non-flight hardware including: instruments; payloads; spacecraft components and subsystems, and integration onto the spacecraft
- Support development and execution of comprehensive procedures that verify all physical and functional instrument/payload/spacecraft interface requirements
- Ensures the availability of required support equipment, including tools, test equipment, etc
- Support I&T and environmental testing shifts which requires schedule flexibility (nights and weekends) and support of some 24x7 testing
- Support fabrication, assembly, inspection, test, and operation of flight and non-flight hardware and ground support equipment (GSE)
- Perform set-up and test of various hardware for bench top testing, vibration testing, thermal glove box testing and thermal vacuum testing
- Work with engineers and technicians to develop hardware assembly procedures
- Familiar with DC electrical power supplies, basic electrical circuits, and shall review and run assembly and test procedures
- Coordinate with others in a team environment, using good communications skills to keep the customer and management team informed on work status
- Follow all applicable GSFC documents for compliance with quality and safety directives
- Bachelor of Science degree, or equivalent education and/or experience in electrical test and integration of aerospace
- Must have an understanding of electronic systems and software
- Hands-on experience with hardware testing using standard lab equipment such as Digital Multimeters, Oscilloscopes, and logic analyzers
- Excellent organizational, verbal and written communication skills
- 06-08 years w/High School Diploma
- 00-02 years w/Bachelors Degree
39
Senior Electrical Systems Engineer Resume Examples & Samples
- Review and interpret project electrical schematics and specifications
- Select electrical control components and prepare bill of material
- Prepare complete submittal packages for review and approval by customer
- Extensive and independent contact with customers, consultants, suppliers and colleagues as necessary to effectively perform project duties
- Proficient with programming various types of programmable logic controllers (i.e. A-B CompactLogix, Siemens)
- Proficient with programming various types of machine interfaces (i.e. Siemens, A-B PanelView Plus)
- Apply variable frequency drives to system
- Perform project site commissioning (both regional and International)
- Troubleshoot electrical control problems over the phone and online
- Manage 3rd party controls and instrumentation suppliers
- Travel to project sites, supplier's factories and technical conferences as necessary
- Maintain a basic understanding of activated sludge processes
- Basic understanding of various control panel standards,( ie. UL, CSA, CE)
- Provide support and controls design guidance for the Tender Support and Regional Commercial Teams during the tendering phase of the project
- AutoCad Electrical experience a plus
- Bachelor of Science degree in Electrical Engineering or related field
- 5 Years of progressive experience as an Electrical Systems Engineer
- Proficient with PLC/HMI programming (Allen Bradley and Siemens)
- Field commissioning experience
- Computer literate in MS Word, Excel and Internet functions
- Self-starter with minimal supervision
- Must be able to read and interpret complex engineering drawings and specifications
- Must be willing and able to travel both regional and International
40
Offshore Wind Machine Head Electrical Systems Engineer Resume Examples & Samples
- Execute Engineering design work on wind turbine electrical components and their assembly within the wind turbine system. Ensure cost, reliability and schedules are met
- Ownership for electrical wind turbine components, which includes definition of requirements and characteristics, technical clarification, interface definition, prototyping, testing, homologation and introduction into manufacturing up to issue resolution in the installed fleet
- Drive compliance of components and their use to international codes and standards like IEC, UL, CSA, ISO, CE, CCC, DIN etc
- Technical support for incidences arising from the assembly plants, installation or turbine operation
- Interface with cross functional engineering teams in the Mechanical CoEs, in the Controls CoEs as well as within Power Conversion for new unit NPI and aftermarket
- Skilled in electrical component design calculations, drawings creation, specifications and schematics
- Proven ability to work in a cross-functional and global environment
- Positive mindset with excellent verbal and written communication skills
- Effective problem identification and solution skills
- Analytical approach to problem solving
- Proven wind turbine product knowledge and responsibility
41
Principal Electrical Systems Engineer Resume Examples & Samples
- Execute to roadmap for electrification of product platforms
- Interface closely with engineering, product management and operation product teams to translate customer needs and platform requirements into electrified system architectures and electrical component requirements
- Explains design innovation based on customer need and required function, leading to a physical solution
- Perform system analysis, modeling, simulation and design in the application of electric machines, power electronics, control systems, harnessing and connection systems, and related electrical modules. These systems will be sized in the range of hundreds of watts to 60 kilowatts
- Develop requirements for electrical components, sub-systems and systems for a variety of CTQ and CTFs including modularity, reliability, durability, performance, safety and cost
- Explains design based on customer need and required function, leading to a physical solution.|
- Use modular product architecture and system engineering methods to develop solutions to meet platform requirements for performance, cost, quality, reliability and schedule
- Analyze, condense and present data, results and recommendations. Maintain orderly project records
- Know, document and communicate project status as required both verbally and in written form
- Plan and coordinate ideation events with cross-functional teams
- Identify and draft disclosures to capture intellectual property as discovered in the development of components and systems
- Manage projects as a Lead Engineer and has capability and potential to manage a team of engineers
- Bachelor's Degree in Engineering and at least 10 years of systems and/or electrical product design experience is required
- Electrical Engineering is preferred
- Master’s Degree is a plus
42
Electrical Systems Engineer Resume Examples & Samples
- Review and insure system design is in line with the customer and internal core requirements
- Identify how each requirements will be validated (Test, Gap Analysis, etc)
- Organize and conduct internal design reviews with global team
- Ensure all software, hardware, Mechanical, and optics designs are working towards meeting the baseline requirements
- Assist Engineering Lead to identify any design efforts that are out of scope
- Review the Test Require Document and generate gap analysis to insure testing requirements are correctly addressed
- Ensure requirements test coverage thru various methods such as Software in Loop (SIL), Hardware in Loop (HIL), Bench Level, Vehicle level, DV, and PV
- Work with Hardware (electronics and mechanical) team and generate the System FMEA
- Generate and Maintain System Block Diagrams (DV, PV, vehicle integration) and Interface control documents
- Maintain / Support calibration, vehicle test tool, and manufacturing tool development
- Performs Impact Analysis on Engineering Change then update design according to Engineering Change and release it into the internal system to Manufacturing
- Analyses Validation Test Results and Characterization test results
- Interface with cross functional groups (Hardware, Software, Mechanical, Optics, Manufacturing)
43
Electrical Systems Engineer Resume Examples & Samples
- Development and in-service support of Aircraft Electrical Systems and Lights (ATA24, Airborne Electric Power Generation, Distribution and Storage Systems, ATA33, Aircraft Lighting Systems)
- Specification, qualification and certification of sub-systems and system components
- Generating of certification evidence, equipment tests, system tests, ELA Electrical Load Analysis, support to safety analysis
- Support to integration of electrical systems and system components into the aircraft, installation requirements, interface definition
- Support to Aircraft Build line, MRO and Retrofit Programmes
- Management of electrical system equipment suppliers, equipment/components selection
- Electrical directives and requirements definition to establish the characteristics and quality of the power delivered
- Solving electrical engineering tasks and problems
- Modelling and Simulation of electrical systems
- Support of other Systems engineers in Airbus Defence and Space Engineering
- Contact to internal, external, national and international customers and partner companies
- Take part in continuous improvement Projects
- Educated to degree in Engineering
- Experience in the field of Engineering
- English: business fluent
- Ability to work in an international team, autonomy and sense of organisation, quick understanding, stress resistance, available for worldwide business travels
44
Electrical Systems Engineer Resume Examples & Samples
- Development of high quality, safe reliable and cost effective engineering solutions for BT UK supported in service fleets
- Providing expert technical support for BT UK supported fleets. Provide ‘2nd’ line support for the resolution of in service issues. Providing technical solutions to safety issues (NIR/USRD) and supporting incident investigations
- Representing BT engineering in meetings and technical discussions with suppliers, fleet staff and the client
- Checking and approving technical documents, drawings and reports produced by other members of team
- Lead by example and promote Systems Engineering best practice. Mentor engineers and assist with development plans
- Master Degree and/or Chartered status (preferred and essential
- Experience or sound understanding of defining, structuring and developing a rolling stock concept and design
- Ability to carry out Root cause analysis and development of appropriate engineering solutions
- Leadership of Incident investigation. Mitigation and resolution of technical safety issues
- Experience of developing and applying a range of system engineering process and tools (e.g. DOORS requirements management database)
- Experience of converting the customer's explicit and implicit technical and functional requirements into technical/ functional specifications
- The job will require a high degree of flexibility and necessitate travel to and working at depots as required
- The ability to manage multiple work streams and manage workload. Maintain individual plan and contribute to team planning activities
- Fluent English
45
Senior Electrical Systems Engineer Resume Examples & Samples
- Generate system architecture drawings, block & wiring diagrams, and report documents that define and describe the functionality and performance of an instrument
- Work with cross-functional teams to collaboratively define electrical requirements
- Analyze and perform testing and create test reports involving the control of robotic arms, liquid handling systems, temperature and pressure control and various sensor inputs
46
Senior Electrical Systems Engineer Resume Examples & Samples
- Responsible for the pre-contract electrical systems design and development in a conceptual way
- Feasibility Study for adopting electrical systems and the Preliminary stages of electrical design scope and also the supervision, monitor and review of such tasks by the appointed external services provider
- Supervise, monitor, direct and coordinate with all others Rail Agency Departments in the development of specifications, standards for low voltage distribution systems, emergency power supply and its distribution system, small power and lighting system for stations, depots and trackside areas
- Responsible for establishing the design basis of new projects for the responsible discipline areas and ensuring the requirements included in the Project Requirements Document
- Performing with minimal direction
- Exercising considerable latitude in determining technical objectives of assignment
- Overseeing the work of less experienced engineers and lead from the front
- Bachelor degree in Electrical Engineering from a recognized university required
- Master or PhD degree in same field is advantageous
47
Electrical Systems Engineer, Motor Graders Resume Examples & Samples
- Have design responsibility for electrical systems and embedded system architecture for new products
- Have design responsibility for vehicle features by owning the creation and upkeep of the following: electrical component specifications, electrical and embedded system requirement documents, and software requirement documents
- Provide design support for diagnosing and resolving field issues with Product Support and DTAC
- Provide team leadership for supporting engineers and contract employees including: contract engineers and designers, software development engineers, engineers and designers located at the TCI engineering center in Pune, India
- Provide coaching and mentoring to early career electrical systems and embedded systems engineers
- 3 or more years of professional experience in electrical systems development
- Experience with electrical hardware, software, and their interaction with mechanical systems
- Strong communication and teamwork skills
- Ability to work in a self-directed mode
- Ability and willingness to travel up to 25% (both domestic and internationally)
- 5 years of professional engineering experience
- A background in construction or agricultural equipment operation
- Understands motor grader systems and applications
- Experience with off-road equipment electrical hardware design, communication bus interfaces, and electro/mechanical control system development
- Experience with both electronic hardware and software
- Experience with reading, interacting with or creating system models using MATLAB Simulink or similar
- Advanced degree in Electrical Engineering, Computer Engineering or equivalent
- Bachelor's degree in Electrical or Computer Engineering
48
Electrical Systems Engineer Offshore Wind Resume Examples & Samples
- Work closely with the Supplier Quality organization to ensure design CTQs are tested properly, as well as met and maintained in the serial production process
- Work closely with the project teams to identify all required product customization and drive the corresponding engineering processes to meet the requirements (NCR, EC, etc.)
- Bachelor’s Degree in Electrical Engineering or related discipline from an accredited college or university
- Used to work according to international codes and standards for electrical components and applications
- EU Work Permit
- Master’s Degree in Electrical Engineering or related discipline
- Experience with electrical CAD tools (ePLAN)
- Experience with electrical components homologation and standards related to wind industry
49
Principal Electrical Systems Engineer Resume Examples & Samples
- Developing & delivering HV earthing and bonding & electrical systems integration consultancy services both within the Atkins Rail business and in Atkins’ other business in the UK and around the world
- Carrying out studies to support the outline, detailed design, installation, test & commissioning phases of projects
- Ensuring that proposed solutions are compliant with relevant local, national & international standards & regulations
- Developing and fostering contacts with a view to generating your own revenue streams in the future
- Working autonomously as well as part of a team
- Preparing and/or delivering presentations
- Capturing and managing change & supporting new work bidding activities
- Proactively resolving design and installation issues
- Being competent to act as CRE for Earthing and Bonding and Stray Current works
- Engaging regularly with key stakeholders including design teams, delivery partners, clients and other Atkins businesses at all levels
- Mentoring and assistance with the development of junior team members
- Maintaining a good understand of Atkins business standards of safety, quality and design
- Technical – a chartered engineer with significant experience of the railway environment. The ability to apply technical knowledge in analysing problems and creating solutions, demonstrating attention to detail and a track record of making correct judgements when interfacing disciplines. Honours Degree in Electrical Engineering or Physics. Good understanding of HV earthing & bonding, stray current control, and related system engineering principals in the railway industry Thorough understanding of national and international Earthing and Bonding regulations & standards and best practice. Practical experience of resolving HV Earthing and Bonding issues at later design and construction stages
- Integration – understand systems engineering principles and how railway disciplines relate in forming part of the overall railway system
- Detail - Have an eye for detail, be able to work to time constrained deadlines and work within a team environment
- Innovation – has vision and is able to identify opportunities to innovate
- Relationship building - a skilled and confident networker with the ability to build relationships and develop opportunities both internally and externally. Be equally comfortable working within an Atkins office as well as within our client’s premises or project offices
- Influencing skills - able to influence across all levels and business areas
- Commercial mind-set - ability to manage change, identify and capitalise on suitable opportunities for the business to market itself
- Leadership - experience of being a technical leader within a project driven, infrastructure environment. Able to develop capabilities across the business, driving best practice. Understanding skills needs, with the ability to build trust, inspire and motivate people to work together as a wider team to deliver success
- Developer - able to mentor, coach and develop people to meet their full potential
- Motivation - has drive and self motivation to work with limited supervision and inspire others
- Further Degree
- Experience of engineering hazard identification and project risk assessment
- Good understanding of regulatory frameworks such as CDM regulations, ROGs, CSM etc
- Experience in simulation and modelling tools such as CDEGS/VISION OSLO/ Mathcad/MATLAB/PSPICE
- Experience of bidding, planning and providing cost, change and budgetary control and monitoring
- Experience of traction system design and simulation
- Experience E&B in other sectors e.g. Power Industry
50
Electrical Systems Engineer Resume Examples & Samples
- Researching historical requirements, design, and performance data
- Managing electromechanical interfaces
- Defining, analyzing, and reviewing results from model simulations
- Using results of modeling and simulations to predict performance
- Updating of models based on designs, test results, and other data
- Customer advising and assistance
- BS in engineering or physics with 5+ years engineering experience with complex systems engineering or MS in engineering or physics with 3+ years engineering experience with complex systems engineering
- 2+ years' experience with systems engineering (e.g., requirements development, requirements analysis and management, design development and review, configuration management, interface control)
- Must have a current Secret security clearance or the ability to obtain one
- Must have demonstrated presentation skills and experience interfacing with the customer
- Proficiency with MS Office (Word, Excel, PowerPoint, Outlook)
- Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills with the ability to be productive with little supervision
- Engineering of Command & Control systems particularly through acquisition and development
- Systems engineering on major system acquisition effort
- MS or PhD in engineering
- Prior Minuteman III weapon system experience
51
Electrical Systems Engineer Resume Examples & Samples
- Supports the design of electrical power systems, vehicle management/flight control systems, payload integration, etc
- Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues
- Analyze and interprets requirements at the aircraft level and flows down requirements to lower level specifications
- Evaluates and coordinates electrical system designs to ensure system-level requirements are met
- Provides documentation and makes technical presentations as required
- Provides technical coordination of vendors and suppliers
- Represent the organization in providing solutions to technical issues associated with specific projects
- Analyzes and troubleshoots systems in assigned area by utilizing standard engineering and scientific principles
- Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company
- Expected to work in a safe manner in accordance with established operating procedures and practices
- Typically requires a bachelors or masters degree in Electrical Engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree
- Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; estimate, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems
- Experience with FAA Regulations, NATO Standards, Military Specifications, and other aerospace industry standards is desired
- All applicants must be current US Citizens for this position and must be able to obtain a DoD security clearance
- Experience with aircraft electrical systems is desired
- Aircraft pilot experience is desired but not required
- Able to travel to flight test facilities in Southern California and Arizona as required
52
Electrical Systems Engineer Resume Examples & Samples
- Design and develop products, tools and or systems
- Research and implement solutions for design improvements and part obsolescence
- Perform testing to validate designs
- Complete design and drawing changes with engineering substantiations
- Prepare requirements, specifications, and assist with the development of processes
- Prepare certification documentation, reports, procedures and tests
- Develop, document, and integrate engineering principles, lean manufacturing techniques, and standard operating procedure into the engineering culture
- Develop designs using Design for Manufacturing (DFM) and Lean Manufacturing principles
- Plan, schedule, conduct, or coordinate detailed phases of engineering projects in a part of a major project or in a total project of moderate scope
- Perform work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of standard materials, and difficult coordination requirements
- Provides technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organizational objectives
- The ability to work independently as well as lead a small team of peers
- CAD and MS Office Suite proficiency
- NX experience preferred
- Experience in bench and the flight testing environments preferred
- Familiarity with 14 CFR Part 23 regulations preferred
- Recognition that Systems are one of many important systems of the airplane, and ability to solve problems with that in mind
- Must have a demonstrated ability to work well with all other disciplines, including those outside of Engineering
53
Electrical / Systems Engineer Resume Examples & Samples
- Capable in Schematic and Layout design, test tools, and methodologies for both high-speed digital and analog circuits
- Experience with RTOS’s, device drivers, embedded applications, C++/C#, embedded Linux, Mono stack
- Demonstrated technical leadership among teams comprised of both hardware and software engineers
- Experience with serial and high speed protocols like USB, GigE, AXI, PCIe, SPI, JTAG, I2C etc. Experience in designing, developing, and testing products to comply with international regulatory rules (CE, FCC, RoHS, IEC, etc.)
- Demonstrated ability to handle multiple designs simultaneously
- Familiar with and accustomed to Agile design and development methodologies
- Highly self-motivated team player with excellent written and verbal communication skills
- 10+ years of experience in designing and shipping embedded hardware and software products
- A Bachelor’s degree in Electrical Engineering or a relevant field
- MS or PhD in Electrical Engineering
- Experience with Mentor Graphics PADs & Power Logic software suite
- Experience with Microcontrollers, Flash memory devices, FPGA’s and GPIO’s
- Experience with eMMC and/or UFS memory implementations
- Experience in the development of product/engineering specifications and requirements
54
Electrical / Systems Engineer Resume Examples & Samples
- Experience with RTOS's, device drivers, embedded applications, C++/C#, embedded Linux, Mono stack
- A Bachelor's degree in Electrical Engineering or a relevant field
- Experience with Microcontrollers, Flash memory devices, FPGA's and GPIO's
55
Electrical Systems Engineer Resume Examples & Samples
- Perform system test at control panel shop
- Perform project site commissioning (both domestically and internationally)
- Troubleshoot electrical control problems over the phone
- Obtain quotations from vendors
- Maintain a working knowledge of all process related products
- Maintain a basic understanding of wastewater activated sludge processes
- Assist with product research and development as required
- Travel approximately 25% domestically and internationally
- Bachelor of Science degree in Electrical Engineering or related discipline in addition to at least three (3) years of experience in project execution related to industrial automation
- Demonstrated ability to be a self- starter with minimal supervision. Field commissioning experience preferred
- Candidates must be able to read and interpret complex engineering drawings and specifications
- Must possess excellent written and verbal communication skills. Proficiency in Microsoft Word, Outlook and Excel required
- In addition, qualified candidates must have a strong background in advanced Process Control Solutions including programming various types of logic controllers (e.g. A-B CompactLogix and Siemens), machine interfaces (e.g. Siemens and A-B PanelView Plus) and SCADA systems (e.g. A-B FactoryTalk and Indusoft)
56
Electrical Systems Engineer Resume Examples & Samples
- Project Engineer to design and release Blue Bird Electrical components/systems
- Design new components/systems or update existing designs
- Create 3D models for components and sub-systems using Catia v5 CAD software and Dassault SmarTeam
- Responsible for verification and sign-off of new designs
- Specify installation requirements for chassis components/systems
- Investigate root cause and determine corrective actions for issues reported in-house or in the field
