Electrical Controls Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the electrical controls engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

C Emard

Cordie

Emard

3943 Christiana Turnpike

Philadelphia

+1 (555) 748 7961

3943 Christiana Turnpike

Philadelphia

Phone

p +1 (555) 748 7961

Experience Experience

Boston, MA

Electrical Controls Engineer

Boston, MA

Abshire-Lakin

Boston, MA

Electrical Controls Engineer

Planning, scheduling, monitoring and reporting of all control and software related activities
Lead commissioning and start up activities including loop checking, debugging, and confirmation of safety system function
Planning, scheduling, monitoring and reporting of all controls and software related activities
Provide input into the establishment of Manufacturing Engineering plant budget, NPP funding forecasts, and appropriation request estimates
Participate in functional area plant meetings to represent Manufacturing Engineering and assist in improving the plant’s performance
Represent Engineering Department in all plant and departmental planning and problem solving meetings
Assists in creating and following electrical design schedule, from specification concept to system up completion, while keeping to an overall project schedule

Houston, TX

Electrical / Controls Engineer

Houston, TX

Mante Group

Houston, TX

Electrical / Controls Engineer

Develops project PLC codes, configures, and set-up networks (includes Screens, Reports, HMI, etc.)
Develop and manage scope, budget and schedules for multiple projects
To work an amount of overtime to complete out of hours PPM and reactive works
Perform equipment checkout (verify quality of manufacturing and test performance)
Design process control systems, create/modify site specific drawings, specify/order material and develop supporting documentation
Provide remote technical assistance/troubleshooting for installed systems
Assist with development of new offerings and refinement/update of existing offerings

present

Boston, MA

Senior Electrical Controls Engineer

Boston, MA

Parisian-Leffler

present

Boston, MA

Senior Electrical Controls Engineer

present

Development of complex PLC programs for novel process systems
Contribute to development of Electrical Design Drawings
Configuration of Human-Machine Interfaces (HMI)
Specification of PLC hardware including CPUs, I/O modules, and Bus interfaces
Ensure compliance with IEC 61508 and IEC 61511 through specification/configuration of Safety Instrumented Systems (SIS)
Ensure compliance with National Electrical Code and Air Products Engineering standards
Knowledge of field bus protocols including HART communications, Profibus, and Ethernet, etc

Education Education

Bachelor’s Degree in Electrical Engineering

Northeastern University

Bachelor’s Degree in Electrical Engineering

Skills Skills

Proficient knowledge of HACCP, GMPs, and SPC
Knowledge of field bus protocols including HART communications, Profibus, and Ethernet, etc
Knowledge of low voltage power distribution systems (Variable Frequency Drives, motor starters, heater controls, etc.)
Self-motivated with ability to multi-task while maintaining attention to detail and deadlines
Strong organizational skills including but not limited to the ability to handle multiple demands and assignments in parallel
Able to work flexible hours to be available for three shifts and weekends
Able to demonstrate understanding of how job performance affects product quality and customer satisfaction
Able to work well with others; build and maintain positive Team Member relations
Ability to multi-task and prioritize duties
Knowledge of disciplined software development process based on CMMI or SPICE process models

Create a Resume in Minutes

15 Electrical Controls Engineer resume templates

Read our complete resume writing guides

Electrical Controls Engineer Resume Examples & Samples

Develop automotive Advanced Driver Assistance & Safety Control Algorithms and prototype software including: definition, design integration, testing, delivery, and maintenance for various ECU's
Benchmark competitor's solutions and determine best ways to improve or surpass the competition
Develop application controls algorithms and prototype software to meet systems level specifications
Configure and integrate serial communications core software into several ECU's
Planning, scheduling, monitoring and reporting of all control and software related activities
2 - 5 years experience in developing control algorithms / software using Matlab / Simulink and C in Real Time Embedded software
Embedded software / autocode generation for 16 bit and 32 bit micro-controllers including application and low level drivers for micro-controllers
Experience with MathWorks - Matlab / Simulink modeling and autocode generation
Bench and vehicle validation of controls and software implementation
Experience with Can Serial Communications Protocols
Excellent communication and inter personal skills required. This person must work well with other engineers in a team environment
Must be self-motivated to complete a task and / or lead projects even if it is outside of just the Controls / Software realm. "Can do attitude"
Experience in developing software for the control of driver assistance systems utilizing forward and rear facing cameras
Experience in developing and implementing software for various displays and HMI
Experience in developing scripts in Matlab / Simulink
Knowledge of image processing and / or prior experience with vision based systems
Experienced in using CAN and LIN based tools such as CANalyzer, CANoe, CANope, neoVI, etc
Knowledge of disciplined software development process based on CMMI or SPICE process models
Some Real-Time OS experience
Knowledge of an event driven architecture
Experience with dSpace Hardware, Software, and Tools

Electrical Controls Engineer Resume Examples & Samples

Develop automotive Advance Driver Assistance & Safety control algorithms and prototype software including: definition, design, integration, testing, delivery and maintenance
Benchmark competitor’s solutions and determine best ways to improve or surpass the competition
Develop application control algorithms and prototype software to meet Systems Level Specifications
Configure and Integrate serial communications core software into several ECUs
Planning, scheduling, monitoring and reporting of all controls and software related activities
Generation of feature and control algorithm requirements
BS, Computer Engineering, Electrical Engineering, MS desired
Embedded software/autocode generation for 16 bit and 32 bit micro-controllers including application and low level drivers for micro-controllers
2-5 years of experience in developing control algorithms/software using Matlab/Simulink and C in Real Time Embedded software
Experience with MathWorks – Matlab/Simulink modeling and autocode generation
Experience with CAN Serial Communications Protocols
Experience configuring Vector CAN embedded drivers
Experienced in using CAN & LIN based tools such as CANalyzer, CANoe, CANape, neoVI, etc
Experience in developing software for the control of Driver Assistance Systems utilizing forward and rear facing cameras
Experience in C/C++/.NET programming for PC applications, VB/VBA programming and/or macros
Experience working with dSpace Hardware, Software, and Tools
Experience in developing scripts in Matlab/Simulink

Electrical Controls Engineer, nd Shift Resume Examples & Samples

Electrical controls engineering background desired
Understanding of and ability to use java C+, C++ and Visual Basic
Experience with Allen Bradley Processors, Motoman Robots and Fanuc Robots a plus
Able to work well with others; build and maintain positive Team Member relations

Electrical Controls Engineer Resume Examples & Samples

Provide Electrical & Controls Engineering design, modification, and support for multiple controls projects, ranging from a single machine to a complete line or process area
Activities may be performed as Project Manager / Project Lead or in support of other Project efforts
Responsible for all Electrical & Controls programming and electrical engineering activities for new projects and/or equipment upgrades, including
BS and/or MS Degree in Electrical Engineering, Mechanical Engineering, or a closely related field, or an AS or Certificate Program plus 5 years’ experience where noted below
Minimum 3 years’ experience specifying, designing, programming, and implementing control and automation platforms, including, PLCs (AB Control Logix and MicroLogix), HMIs (RS Factory Talk SE), AC Drives (AB), and industrial network communication protocols (Ethernet I/P, DeviceNet, Profibus, etc.)
Demonstrated installation and commissioning experience, including contractor and vendor management, ranging from a single machine to a complete line or process area
Proficient with RS Logix 5000, 500, Factory Talk SE, ME & View Point, SICK SVP and SOPAS
Minimum 3 years’ experience troubleshooting, diagnosing, and repairing industrial control systems using root-cause problem-solving and critical thinking skills
Excellent interpersonal communication skills with ability to work effectively on cross-functional projects and effectively influence across all levels of the organization and job functions in both formal and informal leadership roles
Willingness and ability to work flexible hours across three shifts as needed to meet business demands across a three shift operation and weekends
Ability and willingness to travel up to 10%
Proficient in AutoCAD with demonstrated ability produce drawings/designs suitable for fabrication
Experience with design and implementation of Safety Related Parts of Control Systems and general machine guarding principles
Direct experience working with SCADA systems, specifically RS Factory Talk SE
Minimum 3 years’ experience in a distribution, manufacturing, production or facilities environment

Electrical Controls Engineer Resume Examples & Samples

Update, modify, and continuously improve existing controls systems including robotic programs, ladder logic programs, relay logic, electrical distribution, motor controls, operator interface, hydraulics, and pneumatics distribution and control
Design, develop and build new machine controls including robotic, electrical, electronic, hydraulic, pneumatic and vision systems
Train personnel on operation and maintenance and create SOP documents
Perform mechanical and electrical repairs as required especially if controls adjustment or modification is required
Implement and maintain data collection system from shop floor processing equipment
Maintain and update controls portion of machine standards
Complete correspondence, forms and reports using personal computer and applicable software
Participate in Continual Improvement activities
CNC programming skills
Experience with laser cutting/welding machines 3d preferably
Must have previous experience in the industrial maintenance arena both mechanical and electrical

Electrical Controls Engineer Resume Examples & Samples

BS and/or MS Degree in Electrical Engineering, Mechanical Engineering, or a closely related field, or an AS or Certificate Program plus 10 years’ experience where noted below
Minimum 5 years’ experience specifying, designing, programming, and implementing control and automation platforms, including, PLCs (AB Control Logix and MicroLogix), HMIs (RS Factory Talk SE), AC Drives (AB), and industrial network communication protocols (Ethernet I/P, DeviceNet, Profibus, etc.)
Minimum 5 years’ experience troubleshooting, diagnosing, and repairing industrial control systems using root-cause problem-solving and critical thinking skills
Minimum 5 years’ experience in a distribution, manufacturing, production or facilities environment

Electrical Controls Engineer Resume Examples & Samples

Bachelors Degree in Engineering (Electrical / Electronics / Controls & Instrumentation) from an accredited college or university
Master’s Degree in Engineering (Electrical / Electronics / Controls & Instrumentation)
Minimum of 2 years of working experience in electrical and/or generator engineering
Knowledge on Generator and Auxiliary equipment, including their interfaces to Controls systems
Hands on experience in Electrical Drives / Power Conversion / Generator Engineering
Proven experience in developing control logic using Ladder Logic / statement list / block logic diagrams
Working knowledge of Gas Turbine Controls and Operational philosophy with hands on experience on Gas Turbine or Steam Turbine Controls
Knowledge of Network protocols, GE Toolbox / Toolbox ST Experience
Strong communication, presentation & project management skills
Experience working in global, matrix org & ability to make timely and sound decisions based on data
Willingness to be challenged, executes using new technologies & skills
Strong interpersonal skills with ability to influence & lead
Strong organizational / project execution skills and prior success in working with or leading cross-functional teams
Passion for continuous learning and applying best practices to achieve practical solutions
Enthusiastic self-starter who leads by example, sets stretch goals and is committed to team building
Experience in a matrix organization
Actively seek and embrace change
Customer focused and Global mindset

Electrical / Controls Engineer Resume Examples & Samples

Develop and manage scope, budget and schedules for multiple projects
Communicate and coordinate internal manufacturing resources, internal product development resources, external suppliers, and contractors to complete the project
Identify / evaluate new technologies that can be incorporated into the existing processes to improve yield, increase throughput, and/or reduce cost
Some travel required
Bachelor of Science degree in Electrical Engineering required with preference to Master of Science degree
Talented Automation and Controls engineer with hands-on experience in PLC (Rockwell preferred), HMI, DCS and SIS applications development , systems integration, testing and troubleshooting. Conceptual design, project commissioning and start-up for industrial sectors
Provide technical expertise in support of capital projects, process evaluation, and project modifications
High knowledge of complicated electrical machinery and related equipment
Good grasp of electrical system installation requirements for classified areas
Strong ability to troubleshoot PLC and VFD electronic control systems
Outstanding ability to work in digital and analog process control systems
Perform systems integration and industrial networks troubleshooting
Ensured that all facility work was performed in compliance with operating regulations and procedures
Distributed power according to facility electrical equipment and circuits
Verified project designs to ensure operational accountability
Reviewed system design in coordination with external vendors

Electrical Controls Engineer Resume Examples & Samples

4 Year Degree in Chemical, Electrical, or Instrumentation Engineering with 3-5 years experience working with process plant equipment
Ability to provide direction to various operational and technical crafts
Strong planning capabilities and the skills to analyze and interpret data to make sound recommendations to the Engineering Group Leader and to Senior Management
Strong customer focus (internally & externally)
Strong problem solving and organizational skills
Demonstrates initiative and adaptability
Willingness to work off-hours as business needs dictate
Possess a valid jurisdictional driver’s license
Internet experience
Effective time and resource management skills
Ability to direct, motivate, and train and employees
OSIsoft PI Historian experience with PI ProcessBook and Excel is desired
Familiarity with Emerson Ovation Suite of Products, GE Fanuc Suite of Products, and Rockwell Product Suite is desirable
Familiarity with IP networks and network communications is desirable
SAP experience desired
MS Word, Excel, Outlook and Access experience required
AutoCAD experience helpful

Senior Electrical / Controls Engineer Resume Examples & Samples

Design, develop, and service all aspects of electrical/control systems of industrial equipment (machinery) with a wide degree of creativity and latitude
Specify and configure electrical, pneumatic, and hydraulic hardware per application specification
Develop, maintain, optimize, and commonize control systems across different machine types
Understand customer requirements for machine sequencing, communication interfaces, and networking and successfully integrate the requirements into written functional and technical specifications
Diagnose and troubleshoot issues with existing equipment
Provide technical support to help desk, field service technician staff, and customers
Participate in design reviews to ensure optimal implementation of features and design through collaboration
Work with Product Management to provide input to customer quotes
Conduct cost and time estimation
Ensure projects are completed and solutions implemented accurately, on time, and within budget
Comply with safety procedures
May require minimal travel to global customer locations to provide engineering & service support

Senior Electrical Controls Engineer Resume Examples & Samples

Contribute to development of Electrical Design Drawings
Configuration of Human-Machine Interfaces (HMI)
Strong Innovation skills
Ensure compliance with National Electrical Code and Air Products Engineering standards
Knowledge of field bus protocols including HART communications, Profibus, and Ethernet, etc
Knowledge of low voltage power distribution systems (Variable Frequency Drives, motor starters, heater controls, etc.)
Specification of process controls instrumentation (pressure, temperature, flow, level)
Support Project Development activities including scope development and cost estimating
Lead commissioning and start up activities including loop checking, debugging, and confirmation of safety system function
BS in Electrical Engineering or equivalent with 10+ years experience developing PLC Programs for process plants
Familiarity with Allen Bradley platforms preferred. Proven record of PLC process control system software development
The successful candidate should also have a demonstrated track record of success with team efforts

Electrical & Controls Engineer Resume Examples & Samples

Conceptualizes, designs, and implements embedded control systems in powertrain applications
Specifies and implements state-of-the-art electrical machine technology for vehicle powertrain actuation and traction applications
Creates physical models of dynamic systems in the SW simulation tools (Matlab etc.) in order to develop prototype control systems
Implements and tests prototype electrical machine systems and embedded control systems in dynamometer or vehicle installations
Provides creative and commercially viable solutions to electrical engineering issues that arise during the course of development of new powertrain systems
Uses analytical and experimental methods to evaluate the technical feasibility of new concepts
Interacts with a variety of technical contributors including engineers, designers, and technicians to accomplish project objectives
Interacts with customer, partner, and supplier organizations to accomplish project objectives
Clearly communicates project status to management both verbally and in writing
Masters of Science in Electrical Engineering, Control Systems Engineering, or Mechatronics Engineering from an accredited university
English literacy and fluency
Knowledge of Matlab, Simulink, preferably also Ansys
Knowledge of the specification, implementation, and optimization of electrical machines (preferably for vehicular powertrain applications)
Knowledge of real-time embedded control systems and communications networks as applied to vehicular powertrains
LabView experiences
Experience with CAN network interface tools and data acquisition tool
Basic knowledge of internal combustion engine architecture

Electrical Controls Engineer Resume Examples & Samples

Engineering degree, or in lieu of degree, 2 year Technical degree with 3 years of Control Panel design experience
3 years of experience in a manufacturing environment
AutoCAD Electrical or equivalent experience or training
Basic knowledge of industrial panel designs that utilize PLC or HMI
Proficiency with Microsoft Office suite
AutoCAD Electrical

Senior Electrical Controls Engineer Resume Examples & Samples

Design and analysis of feedforward and feedback control and signal processing systems from mission descriptions with emphasis on performance prediction and implementation
Integration and testing of digital and analog control implementations utilizing both hardware and software subsystems as an individual contributor and leader of a multi-disciplinary team
Functional systems engineering activities including requirements development, requirements management and flow down, preparation of internal and external component / subsystem specifications, system concept and architecture generation and design team coordination
Prepare integration plans, design testing to verify control designs and reduce data for acceptance testing and engineering model validation
Create development plans with project teams and execute tasks to an agreed upon commitment for schedule and budget
Support business development activities including proposals (customer and IRAD) and capability surveys of existing solutions
Maintain organized design and test notes / files to allow design reviews in accordance with L-3 Brashear engineering process
BS in Mechanical or Electrical Engineering / MS Preferred
7+ years of experience in control engineering implementations
Concentration in electronic control of structures or motion control
Familiarity with CAE design tools for control engineering (MATLAB)
Written and oral communication skills required
Experience in electro-optical systems preferred

Electrical Controls Engineer Resume Examples & Samples

Works in a team atmosphere to modify/create automated production equipment
Determines equipment electrical hardware modifications and appropriate design
Determines equipment PLC software/HMI requirements and appropriate design
Meets equipment safety needs for control engineering
Supports equipment debug/install in the manufacturing departments
Creates and follow electrical design schedule, from specification concept to system up completion, while keeping to an overall project schedule
Performs AC and DC power requirement calculations
Designs control panels
Designs cable assembly drawings
Utilizes AutoCAD and various PLC/HMI software packages
Modifies/creates PLC ladder logic
Modifies/creates hardware schematics
Modifies/creates I/O schematics
Strong customer focus
Flexible work schedule as project(s) requires
Knowledge of equipment safety regulations ( NEC/NFPA 79 standards)
Servo position control experience
Robotic integration experience
Field I/O networking experience
Basic background in automated equipment electrical hardware/software design
Minimum 3 months of co-op experience in electrical engineering

Electrical Controls Engineer Resume Examples & Samples

Hardware design, PLC programming, machine vision and inspection system programming, power system and facilities design as part of a project team
BSEE Required
Proficient with MS Office (Word, Excel, PowerPoint). General knowledge of industrial machine controls
Experience with machine vision and inspection system hardware and software is a plus
Utilization of CAD and document management systems
Electrical Power distribution and Facilities electrical experience a plus
Up to 50% travel may be required

Lead Electrical Controls Engineer Resume Examples & Samples

Lead the development of new and/or modification of existing machine control hardware and automation software. PLC, Motion Control/Servo, and VFD software programming Development of machine vision system software, DCS software, and HMI software may be included for candidates with the correct skill set or desire to learn
Lead or contribute to the development of project proposals
Conceptualize and estimate machine control and industrial automation hardware and software development effort. Adhere to project standards for design and documentation
Support hardware and/or software designs from conception through development and lab testing Lead teams to complete projects per scope, schedule, and budget expectations
Travel to the customer facility for installation, check-out, and start-up as required
Lead and assist others in troubleshooting software and hardware issues throughout the project life cycle
Report status to the project manager in an accurate and concise manner
Actively engage in personal and team development/improvement efforts
Contribute to department resource planning, recruiting, and project staffing decisions
Operational experience and design application knowledge of Allen-Bradley PLC, Motion Control/Servo and VFD hardware, including edit-level software capabilities. Experience with RSLogix 5000 is required
Familiarity with Delta V and/or Honeywell DCS Systems is desirable
Familiarity with HMI Systems from Wonderware Intouch and/or FactoryTalk View ME/SE is desirable
Familiarity with other PLC platforms such as Modicon, Giddings and Lewis, Reliance Automax, and Siemens S7 is desirable
Application-based experience and design/configuration knowledge of industrial communication networks including Ethernet, DeviceNet, ControlNet, and SERCOS
Manufacturing data integration and management, along with SCADA and machine vision application experience
OEM equipment integration experience and electro-mechanical aptitude. Pneumatics or instrumentation experience is helpful
Proven experience maintaining effective and positive relationships with engineering management, project managers, project teams, clients, OEMs, and vendors
Experience in the Pulp/Paper & Tissue, Food & Beverage, or Consumer Products industries
Experience working in a matrix organization is desirable but not required
Approximately 10 years of machine control and automation hardware and/or software experience required
BS or MS in Electrical or Computer Engineering. Equivalent experience may be considered
10- 20% Travel will be required

Electrical Controls Engineer Resume Examples & Samples

Provide technical direction for plant power infrastructure to ensure sustained plant operations and planned expansions to match business strategic plans
Provide and implement film line machine and drive control strategies and architecture for process machinery upgrades and expansions as either project leader or in support of projects led by others
Lead the basic scope development, design, specification, installation and commissioning of power and control systems associated with new or upgraded industrial machinery
Provide technical expertise related to power and controls issues
Ensure continued compliance with NFPA70E, NFPA70, NFPA79 and related corporate requirements
Provide technical assistance and mentoring to sites electrical maintenance group with respect to industrial electrical systems (PLC, HMI, VFD, communications)
Bachelors degree in Electrical Engineering or related technical field together with 5 or more years relevant industrial electrical experience OR an Associate’s degree in Electrical Engineering or related technical field with 8 or more years relevant industrial electrical controls experience is required
Minimum 2 years manufacturing experience related to production or process engineering is required
Proficiency using AutoCAD and MS Office suite is a plus
Detailed knowledge of PC hardware, operating systems, networking
Minimum of 5 years experience designing, implementing, and troubleshooting industrial electrical power equipment including systems up to 460vac
Minimum of 5 years experience designing, implementing and troubleshooting industrial electrical systems including Power (distribution, motor control), PLCs, HMIs, VFDs, and Industrial Communications (Ethernet, ControlNet, Modbus)
Working knowledge of general industrial control standards (NFPA70, NFPA70E, NFPA 79)
Ability to multi-task by managing time and setting priorities to drive assignments to timely and successful completion

Principal Electrical Controls Engineer Resume Examples & Samples

With minimal guidance, schedule and lead teams through the planning and execution of a medium to large projects. This includes constructing detailed, accurate project schedules and interfacing technical support groups
Devises new approaches to complex problems through adaptations and modifications of standard technical principles
Supervises/coordinates an engineer and/or technicians on assigned work
Supports manufacturing group through improvements to manufacturing equipment and processes
Reviews equipment trends to identify areas of improvement related to yield, downtime, efficiency, etc
Troubleshoots PLC, servo, robotic, HMI/MMI, and related process control and automation systems
Works within small project teams as a subject matter expert and/or project leader to accomplish project objectives including process improvements and project implementation. In addition, work with quality and manufacturing groups to install, validate and put into production medium to large scoped equipment modifications and capital projects
Investigates and analyzes customer problems and develops improvements
Performs and documents hardware/software modifications, and system functional specification updates while adhering to documentation and change control requirements
Prepares standard operating procedures for new and existing control equipment
Contributes and/or manages cost estimating of major capital budget items and the spending of approved project funds
Ability to be self-motivated, work independently, and prioritize multiple tasks
Bachelor of Science in Engineering, 5 - 8 years related experience
Display a solid understanding of theories/practices utilized by other disciplines outside primary area of expertise
Ability to convince management on courses of action with minimal assistance using both written and verbal methods. Must be able to provide solutions that reflect understanding business objectives and cost implications
Programming and design (hands-on) experience with process control systems (Examples include: PLCs, PC based control, servo control, robotics, HMI/MMI). Must possess a strong aptitude to learn new and unfamiliar process control systems. Will be required to design new and modify old / existing systems
Demonstrated project management skills

Lead Electrical Controls Engineer Resume Examples & Samples

Lead the development of new or modification of existing machine vision and inspection system hardware and software. Interfacing to PLC hardware and software is required
Act as a subject matter expert for machine vision and inspection systems within Jacobs Wisconsin operations. Help Jacobs expand machine vision proficiency through mentorship, guidance, and training
Stay abreast of technological advancements in machine vision and inspection and help Jacobs anticipate client needs
Conceptualize and estimate vision and inspection system solutions effort
Adhere to project standards for design and documentation
Apply new vision and inspection system technologies to developmental and production applications
Support hardware and/or software designs from conception through development and lab testing
Lead teams to complete projects per scope, schedule, and budget expectations
Lead and assist others in troubleshooting software and hardware issues throughout the project lifecycle
Development of PLC, Motion Control/Servo, VFD, DCS, and HMI software may be included for candidates with the correct skill set or desire to learn
Operational experience and design application knowledge of a variety of Cognex Vision Systems including In-Sight, Checker, and Vision Pro
Operational experience and design/configuration knowledge of industrial ethernet communication networks
Expertise with machine registration systems for web handling processes will be highly valued but is not required
Familiarity with Thermal imaging, 3D, OCR, and Bar Code Reading Technologies is desirable but not required
At least 5 years of machine vision and inspection system experience required
Familiarity with multiple PLC platforms such as Allen-Bradley, Modicon, Giddings and Lewis, Reliance Automax, and Siemens S7 is desirable
Equipment integration experience and electro-mechanical aptitude. Pneumatics or instrumentation experience is helpful
10 - 20% travel will be required
Position is eligible for relocation assistance**

Senior Electrical Controls Engineer Resume Examples & Samples

BS Degree in Electrical Engineering/Technology, Industrial Controls Engineering/ Technology, Mechanical Engineering/Technology or equivalent
HMI development experience
Ability to fully comprehend the process and operational functions of all of the machines including mechanical functions

Electrical Controls Engineer Resume Examples & Samples

Must Possess a Bachelor Degree in Electrical Engineering
Must have a solid background with control systems including PLC programming, and interface systems to PLC’s such as MMI, SCADA and other
Minimum of 3-5 years working in a fast pace, high-pressure, manufacturing environment
Experience working with basic power distribution for 600volt class systems (motor control centers, distribution panels that feed auxiliary support equipment and lighting, and AC substation transformation); experience with higher voltages (15KV and above) is helpful but not required
Experience in the applications and uses of variable speed drives and associated operator interface devices
Understanding of the National Electric Code and experience in obtaining electrical permits and assisting with electrical inspections
Practical experience with industrial field control devices, pressure transmitters, thermocouple options, motorized valves, proximity sensors, etc
Experience with complex projects, ability to analyze problems quickly, and develop corrective actions
Ability to work effectively and communicate across multiple levels
Demonstrated experience in leading positive employee relations in order to maintain a union-free environment
Ability to coordinate with other departments and managers and work as a team

Associate Electrical Controls Engineer Resume Examples & Samples

Knowledgeable in Allen-Bradley or multiple other PLC platforms (Hands on experience is a plus)
Knowledgeable in HMI (Hands on Experience is a plus)
Knowledgeable in manufacturing machine level electrical instrumentation and control systems
Knowledgeable in Servo/Motion Control
Knowledgeable in communications and networking applications and hardware
Capable of troubleshooting industrial automation and control systems

Electrical Controls Engineer Resume Examples & Samples

Oversight of automation controls and suppression for NAO Plant locations
Write automation and equipment specifications
Supervise RFQ process and participate in supplier selection
Manage the projects and the design reviews
Complete equipment validation at plant locations
Ensure project is handed over effectively to plants including documentation and training
Audit plant maintenance and operation of testers and provide input to operations team to run equipment correctly
Focus on continuous improvement in terms of productivity and standards
Provide and manage documentation library
Role will require travel in-line with program needs – expect around 60-80%
Minimum Associates Degree in Electrical Engineering or Technical discipline, plus 5 years experience in automotive parts manufacturing/ assembly; or Bachelors Degree in Electrical Engineering or Technical discipline
JIT (Just in Time) manufacturing experience is preferred
Proficient in electrical controls – ideally ABB and Siemens
AutoCAD experience is a plus
Proficient in MS Office package – Excel, Word, Project, PowerPoint, etc
Proficient oral/written communication in English

Electrical Controls Engineer Resume Examples & Samples

Deploy Lean and Six-Sigma methodology to simplify and improve process capability within our global factories
Leverage visual management, process improvement and digitization to drive improved product quality by identifying manufacturing issues, developing advanced manufacturing cost effective solutions, and overseeing successful implementation into production
Work with manufacturing leadership to identify and resolve manufacturing and quality problems related to methods, processes, tooling, equipment and product design
Interface with cross-functional counter-parts to achieve program goals and integrate global activities
Support Manufacturing Engineering initiatives with wide business impact and ensure to share best practices across our global factories
Develop new business proposals for factory automation and data collection
B.S. Degree in Mechanical, Electrical, Industrial Engineering or related technical degree and 3 years’ experience or Associates Degree and 5 years’ experience or High School diploma with 7 years of experience in production
Demonstrated troubleshooting, analytical and planning skills
Demonstrated strong communication skills (written and verbal) to all levels of the organization
Ability to identify and implement best practices
Experience with one of the following
Prior experience writing software, supporting relational databases (MySQL,MS Access) or historian databases
Experienced in qualification of manufacturing equipment, control systems or test systems
Solid working knowledge of GEHC QMS procedures for GMP
Six-sigma DMAIC & DFSS certified - experience applying Six Sigma and technical skills to solve tough impactful issues
Ability to provide clear concise updates, to multiple audiences

Electrical Controls Engineer Resume Examples & Samples

Development of complex PLC programs for novel process systems
Specification of PLC hardware including CPUs, I/O modules, and Bus interfaces
Ensure compliance with IEC 61508 and IEC 61511 through specification/configuration of Safety Instrumented Systems (SIS)
Support the development of Process and Instrumentation Diagrams
Use of test equipment for troubleshooting, commissioning, and plant start up
Manage control system project execution

Electrical Controls Engineer Resume Examples & Samples

Controls/Technical support for 2nd Shift production including fabrication, metal finishing, and assembly, through troubleshooting and determining root causes for downtime events
Production barrier identification and elimination for various levels of automation including: stamping presses, welders, conveyors, automated assembly, and robotics
Update, modify, and continuously improve existing controls systems including: robotics, ladder logic programs, relay logic, electrical distribution, motor controls, operator interface, pneumatic/hydraulic distribution
Coordinate with production and maintenance on existing machine control modifications or installations
Create, maintain and keep current all documentation: electrical, hydraulic, and pneumatic schematics; panel layouts; PLC, operator display, operator interface, and robot programs
Implement and maintain data collection system for shop floor production equipment
Ability to prioritize tasks effectively and efficiently
Demonstrated ability to perform root cause analysis and develop action plans to strategically eliminate barriers
Effective communication skills and the ability to work with cross-functional teams
Ability to prepare, read and interpret written reports, instructions, procedures and guidelines
Ability to manage and schedule multiple priorities and meet deadlines

Senior Electrical Controls Engineer Resume Examples & Samples

Applicants should have a minimum of a BS in Electrical Engineering or EE Technology with 7 + years of applicable experience
A working knowledge of AutoCAD, Microsoft Word, Excel, Outlook and Access
Communicate your design recommendations to our clients, project team, construction contractors, and vendors in presentations, meetings, via email and phone as necessary
Ensure that the electrical design on projects conform to the requirements of the applicable codes; including National Electrical Code (NEC), NFPA, and the International Building Code and International Energy Code
Effectively utilize computer design software for design producing construction drawings
Effectively interact with construction personnel providing needed direction and observation
Effectively identify problems and troubleshoot electrical control circuits
Travel out of town or out of the United States from time to time

Electrical Controls Engineer Resume Examples & Samples

Perform Conceptual thru final design of electrical and controls schematics for operational excellence
Program new and existing PLC and PC based equipment
Participate in tool and process examination such as FMEA, Process Flow, Control Plans, etc
Ensure all equipment and process are safe and compliant to industry standards
Ensure equipment and process are capable of consistently producing product compliant with quality and regulatory standards
Design, implement and validate improvements to existing equipment or processes
Provide technical support to team members, customers, and sales

Electrical Controls Engineer Resume Examples & Samples

Work on location or through the phone to troubleshoot customer problems with product to minimize downtime
Electrical programming of products to meet specific customer needs
As a valued member of the Engineering team, creating electrical controls for power units and interfacing control stations to hydraulic power units
Responsible for ensuring the components that are chosen within our products are both functional and safe for installation and use
Prove out your conceptual ideas for new technology for use in product sold to end users
3-5 years of controls creation or programming experience in an industrial environment
Understanding of electric circuits and components. Capable of designing circuits to meet customer expectations
Understanding of basic hydraulics with ability to apply knowledge to product design
Experience with programming micro controllers
Bachelor of Science degree in a technical field or equivalent related engineering experience

Electrical Controls Engineer Resume Examples & Samples

PLC functionality for the process
Ensures operation of equipment by following manufacturer’s instructions; notifying supervisor of needed repairs; evaluating new equipment and techniques
Enhances equipment performance by developing and installing modifications; making adjustments on a proactive basis
Documents actions by completing engineering and maintenance logs
Resolves installation problems meeting specifications and best practices for controls and automation
Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs
Confirms equipment performance by conducting tests/evaluation of physical assets as well as PLC
High School Diploma or equivalent degree
2 - 5 years of work related experience or equivalent vocational training
Experience in Electrical Troubleshooting, Electronic Testing & Design, Problem Solving, Electronic Systems, Equipment Maintenance, Documentation Skills, strong communication skills, Teamwork, and Quality Focus required
Experience with VOM, Calibrators, Signal Simulators, High Voltage/Low Voltage Distribution and motor control (testing and working in the process) required
Ability to Read/Interpret loop drawings/P&ID’s, Electro-Hydraulic schematics (skills)
Experience utilizing Root Cause Analysis (RCA) or other similar problem solving tools
Proficient with Microsoft Office , Windows 7 Professional
Experience in a heavy manufacturing environment required
Hands-on experience maintaining, calibrating, tuning, troubleshooting and programming of PLC’s and instruments and controls
Proficiency in Allen Bradly Control Logix
Electrical engineering degree or two year technology degree is preferred
Experience with Allen Bradley Control Logix, Scada, HMI development, Wonderware, Ethernet/IP, DeviceNet, ControlNet, Variable Frequency Drives, Motion Control, Servos, and Encoders is preferred

Electrical / Controls Engineer Resume Examples & Samples

Develop machine programs for CBI Products, stationary, portable, etc
Provide aftermarket, customer, and dealer controls support, upgrades ,etc for all CBI Products
Create BOM’s and schematics
Responsible for research and development of new products
Create project plan and meet deliverables
Provide manufacturing support
Support CBI Purchasing & Warehouse on any relevant inventory concerns
Work with subcontractors and power companies during stationary systems installation
Work with outside vendors to develop controls systems
Ensures all personnel follow safety protocol, use of PPE, and reporting of unsafe conditions
Performs related other related duties as assigned
Minimum of Associates Degree or equivalent work experience
3 - 7 years of Electrical Design
3 - 7 years’ experience withPLC programming (Allen Bradley preferred)
Bachelor’s Degree in Engineering field
Specific experience with the Parker IQAN Control System
Strong knowledge of industrial controls systems
Solid working knowledge of Auto Cad (Auto Cad Electrical preferred)
Experience with remote radio controls
Some knowledge of hydraulic systems

Electrical Controls Engineer Resume Examples & Samples

Responsible for all aspects of capital project management: Management of Change (MOC), project definition, project planning, capital expenditure management, project timeline management, training and technology transfer associated with capital projects related to plant floor systems and integrated manufacturing systems (IMS)
Responsible for the design, specification, development, installation, plant start-up, troubleshooting, and technology transfer for new products/equipment and cost saving initiatives, including collaboration with global process engineering for design standardization
Support programming and development of PLCs (Programmable Logic Controller) and SCADA (Supervisory Control and Data Acquisition) systems
Implement and conduct operator training of electrical controls of new equipment and components
Function as technical resource and troubleshooting resource for plant operations
Accountable for a reliable electrical power distribution system
Coordinate Electrical contractor activities to include prepare scopes of work, conduct bid meeting and supervise installation of new systems
Devise and develop electrical standards. Ensures compliance with industry practices and regulatory agency requirements
Develop and implement calibration procedures for new instruments. Writes technical documentation and guidelines for operating and maintenance procedures
Manage activities of System Integrators
Source and purchase external technology/equipment/instrumentation by monitoring trends, identifying innovative ideas and integrating them into our manufacturing processes
Accountable for ensuring compliance w/ CP/ Hills, local, state, and federal standards and guidelines related to EOHS, Quality, and Regulatory
Supports implementation of Quality Assurance and Food Safety initiatives. Ensure personnel adhere to Hill’s policies, safety standards, and Good Manufacturing Practices, including Quality Assurance and Food Safety
BS in Electrical Engineering, or related field
Minimum of 3 years manufacturing experience
Minimum of 3 years’ experience in PLCs, Instrumentation and Computer Hardware and Software
Application of project management fundamentals
Knowledge of Electrical Industry Standard and Practices and regulatory requirements
Proficient in Statistical Process Control, CPk and Continuous Improvement Methodologies
Prepare and present business and technical summaries, estimates, and budgets
Teamwork orientation with excellent interpersonal and team skills
Demonstrated performance of attention to detail, follow-up, and analytical decision making
Ability to multi-task and prioritize duties
Computer skills including; Microsoft Office (Word, Excel, and PowerPoint) and email
Works with cross functional teams to implement and maintain CP Best Practices for Factory Performance and Reliability
Prepares engineering estimates, savings analysis, and project justifications for capital projects
Proficient knowledge of HACCP, GMPs, and SPC
Must be able to bend, climb, crawl, work in confined spaces, work in hazardous condition spaces, work in extreme weather conditions, use hazardous materials and lift up to 50 lbs. on continual basis and ability to work at heights of up to 120 ft., use a mechanical lift, or ladder
Must be able to work in a standard office environment

Junior Electrical Controls Engineer Resume Examples & Samples

Provide Electrical support/upgrades/etc. for all CBI Products
Create Electrical BOM’s and schematics for all product Lines
Assist with machine remote communication equipment and modifications
Responsible for research and development to ensure CBI has optimal electrical components
Provide Customer Service, Dealer and Actual Customer Support
Provide manufacturing support and new machine testing
Seeks consistent results and operation of a system within specified tolerances
Creates theory of electrical/hydraulic operation for all product lines
Create and modify machine operational programs
Follow proper Engineering procedures for ECOs, ECRs, etc
Produce all required documentation
Assist in training of CBI Personnel
Work with subcontractors and power companies during stationary systems construction
Work with outside vendors to develop electrical system designs and programs
Assist in the management of all in house electronics/panel builds
Ensures all personnel follow safety protocol, use of PPE, and reporting of unsafe conditions. Follows 5’s practices
Travel both domestic and abroad to perform on site diagnostics and service
Minimum of Associates Degree and/or 2 years applicable work experience
0-5 years of electrical design
2+ years of PLC Programming
20% Travel
Bachelor’s Degree in Electrical or Electrical Controls Engineering
Strong knowledge of industrial control electronic
Familiarity with NEC, NFPA 79 and CE requirements
Experience with remote radio controls would be a plus
Specific experience with the Parker IQAN Control System is a plus
Some knowledge of Mobile Hydraulic Systems
Ability to draw schematics and diagrams
Ability to produce test fixtures, jigs and fixtures
Ability to travel, both domestic and abroad and possess valid passport

Electrical Controls Engineer Resume Examples & Samples

Manage controls-related electrical projects including installation of new or replacement equipment, continuous improvement initiatives, and periodic repair and refurbishment
Participate in functional area plant meetings to represent Manufacturing Engineering and assist in improving the plant’s performance
Provide technical support, direction, and training to tech support and skilled trades personnel within the department
Investigate conveyor and equipment problems to provide technical input for problem resolution
Develop cost estimates, investment forecasts, business cases, appropriation requests, and plans for other minor project activity
Coordinate with departmental tech support engineers and Headquarters Vehicle Systems engineers on new model process and equipment planning, including model changes, throughput improvements, sourcing, etc
Assist in the development of a project support plan between the plant, headquarters, and contractor resources (including paragraph 183 contractual requirements)
Maintain proficiency in his/her field
Support GMS and Quality Network Planned Maintenance initiatives
Utilize statistical methods for continuous improvement of plant controls systems
Enforce safe work practices as the highest priority and implement objectives for improved ergonomics, health/safety, and housekeeping
Maintain good working relationships with peers, hourly employees, union, management, supplier community, and interface with support functions outside the plant as required
Develop project planning timetables and report progress as required
Utilize best practices and common systems to improve competitiveness and reduce waste
Provide input into the establishment of Manufacturing Engineering plant budget, NPP funding forecasts, and appropriation request estimates
Ensure long term, cost effective maintenance of equipment and facilities
Manage projects to minimize investment cost while providing conveyors, equipment, and facilities that require a minimum operating cost (with maximum throughput, energy efficiency, etc.)
Bachelor of science degree in engineering (or equivalent experience as acquired through electrical skilled trades journeyman status)
Ability to program and troubleshoot processors in the current Allen-Bradley PLC family
High level of analytical ability where problems are unusually difficult
High level of written and oral communication skills

Electrical Controls Engineer Driver Assist Systems Resume Examples & Samples

Cameras and radar hardware to support autonomous driving functions
Autonomous emergency braking, forward crash waning, and braking support technologies
Vehicle to Vehicle communications systems to support Intelligent Transportation Systems, Smart City, DSRC (Dedicated Short Range Communication) and related technologies

Facilities Electrical Controls Engineer Resume Examples & Samples

Assume total responsibility for electrical and controls capital projects activities including project definition, development of cost estimates and scope of work, generation of requests for funds, development of specifications, obtain competitive bids, coordination of project activities, control of project costs, assurance of project quality, performance of project start-up activities and development of post completion audits to ensure all aspects of the project comply with defined objectives. Manage outside consultants on the development of project plans and specifications. Manage outside contractors on all associated project activities
Define, develop and implement processes for establishing and maintaining effective programs to ensure electrical and controls equipment utilized on the plant site are safe for use by employees
Establish Failure Analysis processes for machinery and associated electrical and controls devices
Provide technical support for problem identification and correction of electrical operation and capabilities of other devices. Actively participate in definition and establishment of programs that ensure the integrity of machinery and other devices where the strengths and capabilities of the devices must be known to ensure the safe use of them
Provide leadership and guidance for establishing and maintaining a partnership maintenance process including process development, process implementation, and active participation and involvement in process activities to assure continuous improvement and uniform application of process principles
Identify and evaluate new technology for improvement in performance of maintenance activities
Understands and supports Lean Sigma programs and supports LS programs as a technical resource
Develop standards and procedures as required to assure permanence and consistency of processes and programs established in the plant operation
Actively participate in development of short and long range plans to support achievement of all defined areas of responsibility
Provide direct supervision of others in performance of their job responsibilities
Actively participate in and support all principles of the continuous improvement process
Increased levels of availability of production and production support equipment
Improvement in reliability and operation of production and production support equipment
Reduction of total maintenance related costs of doing business
Improvement in technical service support for all customers
Assurance that all related activities are conducted in compliance with all established safety and environmental practices and procedures and are conducted in compliance with company equal opportunity policies
Develop an understanding and be a contributor member of the Materion Elmore site Environmental, Health & Safety System
This position may be required supervise other department personnel
Four year BSEE degree required from an ABET accredited program
One or more years of progressive Electrical or PLC Controls engineering related experience
Proven experience in a manufacturing environment, providing troubleshooting and support for production needs
Capital Improvements Project Identification, development and execution
High proficiency in PLC and HMI programming and associated software
Working knowledge of the NEC and/or NESC
Proficiency in AutoCAD
Only U.S. Citizens or Aliens who have a legal right to work in the United States are eligible for employment in the United States. If hired, can you present evidence of your US Citizenship or proof of your legal right to work in the U.S?
Light and Medium duty stationary hydraulics design and control. IFPS certification a plus
PLC programming and associated I/O (Allen Bradley, Siemens) for motion controllers, servo/stepper motors, power supplies, safety and pneumatic circuits, and sensors
Data collection software and interfaces. (i.e. Proficy Historian)
Power distribution up to 600V including Motor Control Centers
Motor operation, VFD’s and selection of both
Machine Guarding devices and associated controls
Project Management Lead for projects $500K and greater
HVAC systems operation and control
Rolling Mill operation and control
Furnace and Boiler operation and control

Electrical Controls Engineer Resume Examples & Samples

Develop and execute all levels of capital projects at multiple company facilities with a focus on performance, budget and schedule
Collaborate with all facilities to develop electrical and controls standards in adherence to local, state and national electrical code requirements
Provide continuous improvement solutions for manufacturing operations by analyzing production performance data and other root cause methods
Assist in providing electrical and controls scopes and budgets to support the development of ongoing and annual capital budgets
Other duties as assigned by Supervisor
Requires a bachelor's degree in engineering
Minimum of 5 years' experience in related field with proven industry experience, beverage experience a plus
Excellent oral and written communications skills in English. Bilingual in Spanish strongly preferred
Favorable background and drug screen
.Ability and willingness to work 12 hour shifts and the flexibility to work a flexible Full Time schedule that may include weekends and holidays
Requires 30-50% travel

Electrical Controls Engineer Resume Examples & Samples

The position adds value by providing leadership in the analysis and selection of electrical and process controls technologies to solve problems and implement through the development and execution of large and small plant improvement projects
Provide advanced engineering expertise to solve problems and implement changes by developing scope, estimating costs, designing, constructing, purchasing and installing new, or modifying existing, equipment and systems that support the improvement of safety, efficiency, reliability, waste reduction and increased machine utilization
Promote safety through proactive involvement in safety training, adherence to the plant’s safety program and implementation of Electrical Safe Work Practices
Ensure all activities conform to Market Based Management (MBM) and the Guiding Principles
Ensure the facility's electrical systems are operating reliably, efficiently, and in compliance with all electrical safety regulations
Provide guidance to manufacturing operations on selection and implementation of process controls technologies
Design and implement value creating industrial process and motor controls on capital projects of varying magnitude utilizing divisional standards
Develop and implement electrical engineering guidelines and standards
Design, program, modify and maintain PLC and HMI systems
Assist in the implementation of division engineering standards and participate in facility evaluations for technical improvements
Develop, review, and revise project investment requests (DMF) to ensure sound engineering approaches and professional presentations
Work with plant based personnel, corporate engineering groups, and external consultants to ensure the proper execution of Large and Small Projects utilizing the appropriate work processes
A Bachelor’s Degree or higher in Electrical Engineering or an associated field
A minimum of four (4) years of demonstrated electrical, process controls, and project management experience
Advanced PLC programming and HMI development skills
Experience with 3-phase motor controls, 480V A/C systems, and low voltage D/C systems
Knowledge of electrical safe work practices – NFPA 70-E Electrical Safety Standard
Ability to analyze and repair components using conventional and digital multimeters, voltmeters, ohmmeters, and hand tools
Demonstrated technical writing capabilities
Microsoft Windows and Office proficiency
Must be able and willing to work safely, and promote and enforce safe work practice
Industrial electrical systems design, process controls design and implementation, electrical construction techniques
PLC programming (AB, Siemens), HMI Development (GE iFix), Variable Frequency Drives, Servos, and fieldbus networks (Control net, Device net, Profibus, Ethernet)
Digital communications knowledge
Strong project management skills; strong analytical capabilities; proven ability to direct and track progress of projects; problem solving, organizational and communication skills
Proficiency with MP2 (CMMS)

Electrical Controls Engineer Resume Examples & Samples

Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD
Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership
Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals
Must be able to work both independently and in a team environment. Able to work extended hours as required
Experience in closed loop control analysis and design which includes S-domain and Z-domain controllers and system verification test methods (phase-gain stability determination using small signal swept sine or random noise, and large signal transient disturbances)
Must have analytical and practical knowledge of eletro-magnetic and mechanical devises

Principal Electrical Controls Engineer Resume Examples & Samples

Implement plant improvement and expansion projects from the design phase through installation and startup
Coordinate and direct the efforts of designers and craft personnel during implementation of projects
Perform engineering design and analysis and propose solutions to complex problems that are not well defined
Create project schedules and budgets. Track progress and spending
Develop scopes of work and bid packages
Support and work closely with other plant groups including Operations, Maintenance, Work Management and Reliability Engineering
Participate in hazard and safety analysis reviews
Bachelor’s degree in Electrical Engineering or Instrumentation Controls related field. Certified Functional Safety Expert preferred
A minimum of ten or more years of professional experience
Experience with PLC, DCS and Safety control systems in a plant environment
Extensive experience with LOPA, PHA and performing SIL calculations
Experience should include design, equipment specification, process improvement, project management, equipment installation and startup
Demonstrated history of strong communication skills
Interpersonal skills required to achieve cooperation and reach agreement with project participants

Electrical Controls Engineer Resume Examples & Samples

Advanced process control (APC)
Distributed control systems (DCS)
Programmable logic controllers (PLC)
Supervisory control and data acquisition (SCADA)
Experience with implementing or supporting one of the following
GE Cimplicity
Wonderware
DeltaV
Experience writing documentation and procedures related to the function/operation of electrical control systems and device calibration

Electrical / Controls Engineer Resume Examples & Samples

Complete repairs/ breakdowns in plumbing, blocked toilets, minor leaks etc, joinery, door furniture and other works where required
To work an amount of overtime to complete out of hours PPM and reactive works
Take ownership and accountability for designated number of sites ensuring site log books and standards are kept to high standard
Ensure equipment and surrounding area conform to agreed company standards

Electrical / Controls Engineer Resume Examples & Samples

Coordinate project activities with other Ecolab associates, outside vendors/contractors and customers
Support equipment on-site, including startup, customer training and troubleshooting
Assist with development of new offerings and refinement/update of existing offerings
2+ years of experience in Food & Beverage industry
Rockwell (Allen-Bradley) PLC/HMI programming experience
CIP experience

Automation & Electrical Controls Engineer Resume Examples & Samples

Analytical problem solving skills
Conceptualize / develop control systems solutions
Troubleshoot new and existing electrical systems
Manage multiple projects, coordinate resources, provide electrical estimates & project documentation
Research / evaluate new technology for electrical controls systems
Clarify design issues and direct machine build electricians, maintenance electricians machine builders and tooling personnel as well as making electrical recommendations to other engineering disciplines
Knowledge of electrical codes and standards
Understanding of pneumatic / hydraulic schematics and mechanical drawings as related to electrical controls
Competent in CNC, sensors, servo controls, industrial networks, data collection, robotics, instrumentation, welding and vision systems
Experience in the design, sizing, and programming of motion control systems
Experience in the application and use of industrial networks such as Ethernet/IP and DeviceNet
Experience in the application, use, and troubleshooting variable frequency drives
Proficient programming Allen-Bradley Micrologix and CompactLogix processors
Experience programming Siemens SIMATIC S7 processors is desirable
Experience programming Modicon processors is desirable
Application of controls components in a system
Ability to identify cost savings opportunities with existing products / processes
Computer skills: MS office products, AutoCAD for schematics, Rockwell Software, (Siemens PLC experience desirable)
4-year engineering degree preferred or 2 year technical degree with 2 years of electrical controls experience

Electrical & Controls Engineer Resume Examples & Samples

Bachelor’s Degree in Electrical Engineering with a concentration in Controls
5+ years of experience in Electrical Design and classic control theory
Experience with Matlab Simulink, Stateflow, INCA/CANape, automotive controllers and rapid development controls such as dSpace and MotoHawk systems

Senior Electrical Controls Engineer Resume Examples & Samples

1) Performs diverse, specialized and complex work involving significant accountability and decision-making responsibility
2) Designs new control systems and power distribution systems for industrial material handling systems and proposes modifications to existing equipment; customizes standard designs based on customer specifications and scope documents
3) Reviews customer specifications and scope documentation for quotation and clarification
4) Designs system layouts, schematics, and control devices
5) Creates control sequence of operation documents to ensure that designs meet customer expectations
6) Maintains progress schedules that meet project milestones
7) Prepares schematics and specifications for control panel fabrication
8) Provides documentation and support to the field wiring team
9) Creates Programmable Logic Control (PLC) programs
10) Works closely with the Software Engineering team to integrate control solutions
11) Performs on-site commissioning to implement and validate the system design
12) Travels up to 50%
1) Bachelor's degree in Electrical or Controls Engineering or related field or equivalent experience
2) Minimum of 3 years of increasingly responsible experience in professional engineering design and project execution experience; experience in material handling industry a plus
3) Experience with various industrial HMI and SCADA systems
4) Experience with Allen-Bradley controls/controllers or Schneider PLCs a plus
1) Proficient in AutoCAD; working knowledge of Microsoft Office, Microsoft Project, SharePoint and Visio
2) Ability to speak Japanese is a plus
3) Ability to handle multiple project assignments and adapt to changing priorities in a fast-paced results-oriented environment
4) Ability to interface effectively with internal and external customers, vendors, consulting engineers, architects, and installers
5) Strong verbal and written communication skills
6) Strategic thinking and problem-solving skills
7) Team-oriented and collaborative
8) Self-motivated and detail-oriented
9) Ability to learn new technology

Electrical & Controls Engineer Resume Examples & Samples

Performing on-site installation, commissioning and fault finding of process equipment
Designing, planning and undertaking electrical and control systems work on a range of small and medium capital projects
Providing technical support for process control network and electrical issues with industrial communication protocols
Fostering a culture of safety and continuous improvement
Relevant tertiary qualifications in Electrical Engineering
Experience working as an Electrical Engineer
The ability to work in a team environment and demonstrate commitment to safety

Electrical Controls Engineer Resume Examples & Samples

Manage/Lead Electrical and Controls Engineering group’s resources and projects
Design electrical wiring of STET Equipment to meet US NEC and/or international codes, safety requirements and guidelines
Develop logic programming for PLC
Design user interface for HMI
Design and set-up Local Area Networks (LANs), Virtual Private Networks (VPNs)
Configure control computers, servers and communication devices for local and remote support
Provide remote technical support to existing sites
Commission new installations of STET Equipment at remote sites
Bachelor’s degree in Electrical Engineering (EE) required. Masters in Electrical Engineering degree is preferred
Must have at least 10 (ten) years of experience with demonstrated supervisory experience
Programming experience with PLC (Allen-Bradley RSLogix5000 preferred)
Programming and design experience with HMI (Wonderware InTouch preferred)
Excellent understanding of electrical wiring, high voltage, sensors, computers, networking, industrial communication and troubleshooting
Working knowledge of electrical drawing software (AutoCAD, Solidworks)
Excellent communication skills for working with customers and team members
Position requires ability to travel internationally for commissioning and troubleshooting

Electrical Controls Engineer Resume Examples & Samples

Superior knowledge of systems integration strategies, concepts, and techniques
Excellent problem-solving and troubleshooting skills
Experience with design of custom equipment for manufacturing including assembly, inspection, process control, etc
Software experience with Siemens TIA Portal & Step7, AutoCAD Electrical, EPLAN, MS Office, etc
Hardware experience with Siemens 1500 series PLCs, servo drive systems, industrial networking (Profinet, Profibus, Ethernet, etc.) PID controls, power distribution systems, etc
Electrical design experience with JIC symbology, IEC experience a plus
Experience with Risk Level Assessment, codes, and regulations for industrial equipment safety
Extremely self-motivated & driven to achieve results
Assertive approach to solving problems
Strong teamwork skills

Electrical Controls Engineer Resume Examples & Samples

Designs, develops, and supervises all aspects of electrical control systems, (including HMI and PLC code), equipment, based on approved PID’s
Rockwell RSLogix 500/5000 and FactoryTalk View Studio programming required. Modicon programming would be a plus
Will be responsible for the installation and technical support of PLC based hardware and software
Primary job functions require exercising independent judgment
Design and develop electrical panels including machinery controls
Integrate components into the final design
Evaluate the effectiveness of the design and change if necessary
Estimate cost, reliability, and safety factors
Use computers extensively to produce and analyze designs
Generate specifications for components
Assembles bid/approval drawing packages
May assist in the supervision/training of engineers during development stage
On site customer support/start-up. Estimated 50% travel in the U.S. and Canada
Bachelor's degree in electrical engineering preferred, and 3-10 years of experience in the field or in a related area
Has extensive knowledge of commonly-used concepts, practices, and procedures within a particular field
Works under minimal supervision

Electrical Controls Engineer Resume Examples & Samples

Knowledge of Allen Bradley PLC software, Visual Basic, C#, structured text and ladder logic
Knowledge of electrical, mechanical, pneumatic, and hydraulic systems
Knowledge of Serial, DeviceNet, EtherNet/IP communication protocols
Knowledge of Natl. Electrical Code, NFPA regulations, and EN directives
The ability to troubleshoot electromechanical machines
The ability to design control systems using PLCs, flow controllers, sensors, robotics, and other electronic components
Experience in the use of hand and power tools
ASEE/ASME or equivalent two year degree / combination of relevant experience
BSEE, MSEE, BSME, MSEE preferred
5 years of machine design experience required
Thermal spray, welding, and robotic integration experience preferred

Electrical / Controls Engineer Resume Examples & Samples

Develop and maintain the plant’s manufacturing control and data acquisition systems
Develop and integrate operator interfaces between manufacturing systems and users
Support and troubleshoot issues with control systems including PLC programming, interface systems, and PC controlled systems
Revise equipment programs as necessary to support manufacturing process improvements
Develop the planned maintenance of all manufacturing electrical infrastructure
Train designated personnel in the operation and maintenance of programmable logic controllers and manufacturing networks
Manage projects, including appropriation requests, budgets and timelines, and facilitating cross-functional teams
Function as the liaison with manufacturing engineering on all equipment control and motion issues
3 - 5 years’ experience in manufacturing or product engineering

Electrical Controls Engineer Resume Examples & Samples

Ensure smooth transition of new equipment to production support personnel
Provide controls related input for product equipment design reviews and process FMEA’s
Research and develop new equipment and control technologies related to Molex manufacturing processes to continuously improve our manufacturing methods
Maintain a safe work environment and good housekeeping practices
Serve as a contributing member reviewing manufacturing issues on teams as required
Understand, support and contribute to current Molex Quality and Environmental systems by following stated policies and procedures

Electrical Controls Engineer Resume Examples & Samples

Work closely with Controls engineering and production areas to ensure equipment is operating at targeted efficiency and quality goals
Manage, prioritize, and implement controls projects requested by management, engineering, quality, and production areas, focusing on continuous improvement
Proactively find and implement process improvement opportunities to resolve manufacturing equipment’s design, safety, and process issues with existing and new equipment
Provide controls technical leadership, knowledge, and direction to maintenance support personnel as required
Ensure smooth transition of new products to the manufacturing facilities by participating in the NPD process to understand and give direction on machine controls and product inspection/test issues
Establish working relationships with outside suppliers, providing installation and support on external equipment
Assist in after hours support for production processes as required
Actively support Lean/Six Sigma initiatives and programs
Understand, support and contribute to current Molex Quality and Environmental systems by following stated policies and procedures. Primary responsibilities are within Molex Lincoln campus, with supporting responsibilities reaching out to suppliers, customers, and other Molex facilities

Electrical Controls Engineer Resume Examples & Samples

Manage electrical controls and computer systems to drive and support overall plant performance through improved plant uptime and machine utilization
Drive and support Electrical Preventive and Predictive Maintenance functions and repairing of manufacturing equipment, electrical controls, electrical equipment and functions in the facility and other related duties. (Electrical systems, VFDs, Flow meters, Load cells, Batching scales, RTD's and thermocouples, etc.)
Recommend and support maintenance functions for the facility, as well as electrical PM's; to include reviewing/updating all existing PM's and generating new PM's per equipment as new equipment is installed or upgraded; work order, repairs and improvement project
Continuously observe areas for plant improvements and presents opportunities for ongoing improvement projects
Project Oversight/Process Logic – Execute complete plant projects, electrical designs, create electrical schematics, panel layouts, electrical bill of materials, ladder logic and/or technical SOP for reliability and manufacturing personnel
A minimum of four (4) years of experience in industrial automation, controls systems development and commissioning
PLC programming and HMI development skills (i.e., Allen Bradley, Siemens, etc.)
Experience with power distribution systems and components, including, 3-phase motor controls, 480V A/C systems, and low voltage D/C systems
Knowledgeable of Serial, DeviceNet, and EtherNet/IP communication protocols
Experience in automation systems, vision systems, proximity and photo sensors, servo controls, motors, drives, and Variable Frequency Drives
Knowledge of electrical safe work practices – National Electrical Code, and NFPA 70-E
Strong collaboration, communication, and interpersonal skills
Possess a quest for knowledge/willing to learn; sense of urgency, self-motivation, principle-based entrepreneurship
Experience with robots and robotic controls
AutoCAD Electrical proficiency
Advanced knowledge of Allen Bradley PLC programming

Electrical / Controls Engineer Resume Examples & Samples

Bachelor's Degree in Electrical Engineering or equivalent degree
Must be proficient in MS-Office
Must possess strong problem solving skills (including SPC,DOE,Kaizen and root cause analysis)
Must have knowledge and experience with automated production equipment
Must have proven programming experience with Allen Bradley, control logics 5000, RS logic 500, Siemens, and panel view software
Must have experience with both Fanuc and Abb robotics programming and hardware
Must be knowledgeable in areas of mistake proofing and problem solving techniques. (mqp process, PFMEA and FMEAC)
English language competency required with good written and verbal communication skills
Must have ability to read, understand and troubleshoot electro-hydraulic/pneumatic controls
Master's degree in Electrical Engineering or equivalent degree
CMRP certified
5 or more years of manufacturing experience in automotive assembly /machining operations
WCM audit experience is a plus

Electrical / Controls Engineer Resume Examples & Samples

Modify electrical control circuits and PLC/HMI programs
Work on a maintenance team in troubleshooting of manufacturing equipment, control systems, and data acquisition breakdowns
Partner with Health, Safety, and Environmental team to ensure compliance with standards, practices, and policies for pollution control, installation, modification, quality control, testing, operating procedure, inspection, and maintenance of equipment, according to engineering principles and safety regulations
Respond to maintenance issues with equipment and control systems in support of a 24/7 operation
Assist with design, integration, installation, and support of manufacturing equipment, control systems, and data acquisition systems. This includes new installations and existing equipment/system upgrades
Interface with Production/Engineering personnel at all levels
Perform as a technical resource for plant electricians
Write technical reports and develop charts, graphs, and schematics to describe and illustrate system operating characteristics and functionality
Test and commission newly installed machines and equipment to ensure fulfillment of contract specifications
3-5 years' experience in control systems, programming and troubleshooting
Knowledge of safety circuit, 24VDC and 120VAC control circuits and troubleshooting
In-depth knowledge of common controls architecture provided by Rockwell Automation and Honeywell required
Experience in manufacturing including process knowledge, software development & hardware integration, knowledge of system engineering required
Knowledge of three phase motors, transformers
Strong programming skills in Allen-bradley controllers like SLC500, ControlLogix and HMI/SCADA packages like Factorytalk View Studio
Knowledge of basic networking and communication protocols like Ethernet/IP, DH+, DH485, TCP/IP
Required knowledge in AutoCAD
Excellent interpersonal communication (written and verbal)
Proven teambuilding skills including facilitation and team member participation

Electrical & Controls Engineer Resume Examples & Samples

Develop designs for electrical processes and equipment for new and existing facilities
Communicate with other associates to effectively coordinate the work
Supervise contract engineers, draftsmen, and CAD operators in the preparation of electrical drawings, specifications, estimates, documentation and other activities needed to accomplish project objectives
Ensure that drawings and specifications produced are accurate, clear, and concise
Regularly review the progress of projects during design, fabrication, and installation to ensure expenditures will not exceed the authorized amounts and that schedules are met
Maintain communication with all plants to provide consultation and assist in the solution of engineering problems
Manage and coordinate projects in the department, often directing other technical personnel in the process
Develop practical engineering solutions to problems arising in the course of the design and installation of the project
Work frequently with installation contractors and equipment vendors to ensure successful installation and startup of equipment working with purchasing, the candidate analyzes bids and makes decisions relating to fabricators and equipment suppliers
Job responsibilities require that approximately 20 – 40% of time be spent in travel, which can be international as well as domestic

Electrical Controls Engineer Resume Examples & Samples

Electrical project management of production orders from order entry to commissioning and aftermarket support
Design electrical control systems for OEM equipment by reviewing and implementing customer specifications and performing required electrical calculations
Draft schematics, panel layouts, point to point wiring diagrams, and conduit routing design using AutoCAD software
Program PLC (Programmable Logic Controllers) and HMI (Human Machine Interface) configurations required per application (multiple platforms)
Perform hands-on quality assurance tests on all electrical components and control systems to assure minimal field time required for commissioning
Develop bills of material for each project and provide Purchasing Department with detailed source and cost information for all electrical components and instrumentation
Develop technical operating manuals required per application
Travel to perform commissioning or field service of a more technical nature
Aftermarket support including controls part retrofits and customer phone support
Provide Field Service Technicians technical support during installations and startups
Work on continuous improvement objectives
Up to 35% travel required, passport required
Education (degree or years) and/or Certification/Registration: 2-Year Electrical Engineering Degree minimum; 4-Year Electrical Engineering Degree preferred
Type and Length of Experience:Controls design experience, 2 years
Knowledge, Skills, Abilities and Attributes Desired in Candidate

Regional Electrical Controls Engineer Resume Examples & Samples

Theory/functionality of manufacturing systems and unit operations
Continuous improvement techniques (Lean, TPM, Kaizen)
Process measurement and control
Advanced computer system and software skills
Mechanical aptitude and troubleshooting
Ability to understand and apply general engineering principles
Demonstrated experience in leading and managing up to $10MM capital investments

Electrical Controls Engineer Resume Examples & Samples

Able to design, develop, and streamline various aspects of electrical controls systems, general electrical circuitry, pneumatic, hydraulic systems, and machinery in the plant with use of AutoCAD/AutoCAD Electric, HMI Software/ Design, and/or E-Plan
Provide direction and be able to execute the programming for, installation of, and technical troubleshooting support of PLC ladder-logic based hardware and software applications throughout the plant
Provide controls and systems engineering support for emergency and unscheduled repairs of production equipment during production peak and off-peak run times as needed
Able to work with cross functional groups, as well as work effectively with Plant Engineers and Maintenance Supervisors to complete projects on time and within schedule
Able to read and interpret equipment manuals, schematics, machinery assembly drawings, create component hardware BOMs, and determine additional system/hardware components for the design of electrical control systems and circuitry diagrams to perform required maintenance and service
Able to diagnose process and machinery problems utilizing root cause failure analysis techniques, replace or repair equipment parts, test and make adjustments as required
Assist with and provide guidance for the compliance of plant safety regulations such as (Arch Flash Electrical Safety- NFPA-70E; LOTO, Energized Work Permits, Safe Cell Entry)
Prior related plant (JIT) shop-floor electrical controls systems support is a plus
Bachelor’s Degree in Electrical/Electronic Engineering or related field
3 - 5+ years of Electrical Controls/System Engineering industry experience
Strong skills in ladder logic, preferably Allen-Bradley Systems; PLC5, SLC and ControLogix 5000-5580
Strong Skills in HMI Design, Preferably FactoryTalk View and Ignition; WonderWare. LabVIEW
Familiarity with Ethernet/IP and basic networking applications and practices
Working knowledge and understanding of plant power distribution equipment and controls
Experience and working knowledge of robot teach points and programming code understanding

Electrical Controls Engineer Resume Examples & Samples

A minimum of two (2) years of experience in industrial automation, controls systems development and commissioning
Ability to design control systems using PLCs, flow controllers, sensors, robotics, and other electronic components
Knowledge of Serial, DeviceNet, and EtherNet/IP communication protocols
Willing and able to work safely, promote and enforce safe work practices
Willing and able to work in a manufacturing environment, including periods of time in noisy, dusty, non-air conditioned or unheated areas
Willing and able to work on-call to include nights, weekends, and holidays
Experience working in Gypsum

Electrical / Controls Engineer Resume Examples & Samples

Provide specialist advice and service in the areas of electrical and controls engineering
Plan, prioritise and review Electrical/Controls improvement work with production teams
Deliver projects as well as electrical and control elements of new installations
Advise the Engineering Leader and Factory Leadership Team on up-to-date developments in order to keep the operating system within World Class Standards
Work collaboratively with team members

Electrical Controls Engineer Resume Examples & Samples

Design control panels for individual sub-systems within a facility
Work closely with other members of the controls group to ensure drawings and software are completed as required per the project scope and schedule
Ensure the sub-systems are fully integrated and the facility has complete operational capabilities
Use AutoCAD Electrical and other tools available to design systems per company and customer standards
Generate PLC and HMI programs per current design and customer specifications
Collaborate with company employees and vendors to ensure all project aspects are considered during the design and commissioning phases
Travel to customer locations (15 – 20 weeks per year)

Electrical Controls Engineer Resume Examples & Samples

Works in a team atmosphere to create/modify automated production equipment
Assists team in determining equipment electrical hardware modifications and appropriate design
Supports team in determining equipment PLC software/HMI requirements and appropriate design
Assists in creating and following electrical design schedule, from specification concept to system up completion, while keeping to an overall project schedule
Maintains a teamwork environment consisting of electrical designers to ensure company standards, participation in projects, and peer internal reviews are positively reviewed
Assists in performing AC and DC power requirement calculations
Assists project leader with designing control panels
Supports with the design of cable assembly drawings
Assists with the creation of PLC ladder logic as needed with scope of projects
Works with project leader to modify/create hardware schematics
Assists project leader with the modification/creation of I/O schematics
Knowledge of PLC and HMI hardware and software functions

Field Electrical Controls Engineer Resume Examples & Samples

Set up and operate machinery to produce customer’s product; instruct operators in set-up and operating procedures; provide technical and practical answers to customer’s questions or problems
Perform routine and/or emergency breakdown mechanical/electrical service on company equipment; determine root cause of trouble; prepare report of findings and solutions to problem
Act as liaison between customer and company; maintain positive relationships with customers
Prepare and submit reports as required
May lead a small team of field service team members, contractors and/or customer personnel through the project stages
Maintain a clean, orderly and safe working environment., Associates - Related Field, Field Service Experience, High School or equivalent - Related Field

Electrical Controls Engineer Resume Examples & Samples

Understanding of various statistical analysis tools and methods
Biopharmaceutical, cGMP, FDA and ISO13485 experience a plus
Lean Manufacturing Methods experience a plus
Self-motivated and good problem solving skills using investigative tools (5 Why, Fishbone, Fault Tree Analysis, 8D, etc.)
Familiar with engineering standards, testing, SPC and FMEAs
Proficiency in Microsoft Office applications (Word, Excel, PowerPoint, Project, Visio)
Understanding of DOE, FEA and associated software tools
Capability in Solid Works CAD software. Solid Works Essentials Training Certificate
Ability to respond to production issues as needed on 2nd and 3rd shifts
Good communication, interpersonal and interdepartmental coordination skills
Willingness to travel as required (<10% anticipated)
Bachelor’s Degree in Engineering or related technical field
3+ years’ experience in manufacturing production
Automation and PLC program experience preferred

Electrical & Controls Engineer Resume Examples & Samples

Bachelors degree in Engineering - Electrical Engineering degree is preferred. Other Engineering degrees will be considered if industrial controls experience is persuasive
3 years control system hardware and software design experience
Demonstrated interpersonal skills for interfacing with team members and customers
Industrial project management experience
Field electrical installation & startup experience
Start to finish PLC application engineering experience. Must have written complete applications for PLCs from two or more vendors such as: Allen-Bradley, Siemens, GE, Mitsubishi or Modicon (Schneider)
Start to finish HMI development experience
Start to finish electrical control system hardware design experience (control panel and field wiring)
Competency in Electrical CAD
Electrical controls equipment specification and procurement experience
Web handling control system design experience is a plus
Knowledge of electrical codes (NEC)
Database experience is a plus
SCADA experience is a plus
Operations or maintenance experience is a plus but not required
Design and execution retrofit projects involving AC and DC drives, servos, PLC and HMI modification and/or replacement on Presses, Lamination, Slitting, and other capital equipment
Specification, programming and startup of coordinated drives systems for web handling applications
Original development of PLC, HMI and Drive System applications
Design of secure industrial communication networks (EthernetIP, ControlNet, Profibus, Modbus, Devicenet, etc.) in collaboration with IT network professionals
Specification of electrical systems and building automation for new and existing plants
Design of electrical schematics and control panel layouts using AutoCAD
Project Management of small and intermediate capital projects, including supervision of contractors and plant maintenance associates during equipment startup
Collaborate with plant associates to specify electrical support equipment
Design new power systems and distribution to support production equipment
Travel, both domestic and international, to evaluate new equipment and technologies
Provide technical support to production facilities with the purpose of avoiding service costs and optimizing performance
Develop controls approaches for improving manufacturing processes
Develop innovative technology that will give Printpack a competitive advantage

Electrical Controls Engineer Resume Examples & Samples

Active participation and support of plant safety and environmental/wildlife committees or improvement teams
Safe Maintenance function meeting Legal, Quality and Environmental Requirements
Maintain a working knowledge of safety policies and regulations to ensure duties of self and others are performed in a safe manner
Confers with management and maintenance to resolve electrical maintenance problems and recommend measures to improve operations and conditions of machines and equipment
Confers with associates and their team to resolve issues/concerns
Plan, schedule and assign those jobs or tasks ensuring the process, availability of tools, parts, supplies, and equipment
Follow up on the effectiveness of work or operations performed and take or initiate corrective measures where necessary
Provide on-the-spot guidance and formal training as required
Ensure adequate supply of OH&S equipment and supplies, availability of safety and emergency procedures and proper working environment and conditions
Maintain working and history files of continuous emission monitoring equipment maintenance and repair history
Represent Engineering Department in all plant and departmental planning and problem solving meetings
Carry out and / or oversee the development and implementation of all electrical / instrumentation type modifications as a result of corrective actions or as may be requested by other departments
Develop control programs for all field programmable logic controllers (PLC’s) and maintain all associated documentation in a current state
Control the use and coordinate the work of outside contractors ensuring that proper insurance certification is on file before any work begins
Assist in the planning, and participate in the turnaround program from the electrical aspect
Remain up to date on new technologies and techniques in this field
Electrical Engineering Degree - BS
3 to 7 years electrical experience in manufacturing (in production)
24/7 operation (intense)

Electrical / Controls Engineer Resume Examples & Samples

Participates in initial System Design Review, as requested
Attends customer related approval meetings, as requested
Contributes to system architecture, description of operation, functional specifications, and interface documents (Host, MHE, WCS, Cranes, Scanners, etc…)
Adheres to and validates project specifications while maintaining as sold scope
Monitors and works from project task list and timelines; report progress on a regular basis
Develops project PLC codes, configures, and set-up networks (includes Screens, Reports, HMI, etc.)
Participates in PLC Code reviews and audits
Participates in testing and emulation in-house
Participates in executing test plans on-site, both internal and customer acceptance/BUAT/UAT/FAT
Assists with any formal or informal training (internal and customer) and facilitate future turnover to LSS
Communicates and brings to closure all internal & customer created issue lists
Contributes to test plans (Internal, In-House, Site, Commissioning, and Acceptance)
Bachelor’s Degree in Electrical Engineering or PLC/Electrical Controls Engineering or equivalent experience required
One to two years of Electrical Engineering experience is preferred
MS Excel/Word
Comprehensive computer application skills, Office, Project
Knowledgeable of contract language and accounting functions
Ability to anticipate risk and to proactively mitigate
Ability to think analytically
Financial & Budget Knowledge
Up to 25% travel domestic and/or international to work at client sites , training, etc

Download Electrical Controls Engineer Resume Sample as Image file

Related Job Titles

Facilities Electrical Engineer Resume Sample

Electrical Hardware Engineer Resume Sample

Electrical Test Engineer Resume Sample

Electrical Reliability Engineer Resume Sample

Lead Electrical Engineer Resume Sample

Engineer Electrical Resume Sample

Entry Level Electrical Engineer Resume Sample

Electrical Lead Engineer Resume Sample

Senior Engineer / Electrical Engineer Resume Sample

Power Electrical Engineer Resume Sample

Electrical Site Engineer Resume Sample

Browse More

Electrical Controls Engineer Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Electrical Controls Engineer resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer, nd Shift Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical / Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Senior Electrical / Controls Engineer Resume Examples & Samples

Senior Electrical Controls Engineer Resume Examples & Samples

Electrical & Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Senior Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Lead Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Principal Electrical Controls Engineer Resume Examples & Samples

Lead Electrical Controls Engineer Resume Examples & Samples

Senior Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Associate Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Senior Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical / Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Junior Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Driver Assist Systems Resume Examples & Samples

Facilities Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Principal Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical / Controls Engineer Resume Examples & Samples

Electrical / Controls Engineer Resume Examples & Samples

Automation & Electrical Controls Engineer Resume Examples & Samples

Electrical & Controls Engineer Resume Examples & Samples

Senior Electrical Controls Engineer Resume Examples & Samples

Electrical & Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

Electrical Controls Engineer Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume