Junior Electrical Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the junior electrical engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

E Kirlin

Erin

Kirlin

6454 Olin Skyway

Houston

+1 (555) 727 1587

6454 Olin Skyway

Houston

Phone

p +1 (555) 727 1587

Experience Experience

Chicago, IL

Junior Electrical Engineer

Chicago, IL

Emmerich and Sons

Chicago, IL

Junior Electrical Engineer

Cooperation with engineers and designers of other disciplines
Prepare drawings of structures, systems, maps, and/or graphs manually or with computer aided tools (CAD, etc.) while maintaining the quality, content and drafting standards
Carry out routine technical surveys, and make suggestions to modify processes
Prepare plans, designs and calculations in accordance with established standards and other specifications
Develop detailed printed circuit boards using PCB layout and schematic capture software
Provide circuit analysis and simulation in SPICE and MathCAD
Electrical circuits are designed, assembled and tested in a timely manner

Houston, TX

Junior Electrical Engineer, Fpga

Houston, TX

Bauch, Barton and Gerlach

Houston, TX

Junior Electrical Engineer, Fpga

Installing and assisting with the development of new system modifications, troubleshooting and restoring current ASR-9 (radar) systems
Provide Circuit board design and FPGA programming
Perform key site testing operations and responsible for preparing the modification kits that will be shipped and installed in the field
Test and evaluate Power conditional replacement for the Remote Monitoring Subsystem (RMS)
Schematic capture and PCB layout with Altium Designer software
Research, evaluate and test new hardware technology that will be used to replace current obsolete components in the NAS equipment
Test national modifications done to tentatively be implemented in the ASR-9

present

New York, NY

Gssc Junior Electrical Engineer T

New York, NY

Hickle, Roob and Beier

present

New York, NY

Gssc Junior Electrical Engineer T

present

Model circuits, analyze performance data, perform data processing
Participate in research, planning, design and development of electrical systems
Interface with AF customer
Design of electrical systems and installations for various types of industrial clients including microelectronics, food and beverage, consumer products and pharmaceutical industries, datacenters, general manufacturing
Development of conceptual design and preliminary design documents
Calculations related to sizing and selection of the mentioned systems
Preparation of electrical one-line diagrams and general arrangements

Education Education

Bachelor’s Degree in Engineering

University of Virginia

Bachelor’s Degree in Engineering

Skills Skills

Design of electrical systems and installations for various types of industrial clients including microelectronics, food and beverage, consumer products and pharmaceutical industries, datacenters, general manufacturing
Development of conceptual design and preliminary design documents
Calculations related to sizing and selection of the mentioned systems
Preparation of electrical one-line diagrams and general arrangements
Cooperation with engineers and designers of other disciplines
Prepare drawings of structures, systems, maps, and/or graphs manually or with computer aided tools (CAD, etc.) while maintaining the quality, content and drafting standards
Carry out routine technical surveys, and make suggestions to modify processes
Prepare plans, designs and calculations in accordance with established standards and other specifications
Basic knowledge of analog, digital and embedded controller electronic design
Basic knowledge of printed circuit board Layout and schematic capture (Altium Designer and/or EasyPC)

Create a Resume in Minutes

13 Junior Electrical Engineer resume templates

Read our complete resume writing guides

Junior Electrical Engineer Resume Examples & Samples

A working knowledge of current ETCI standards
A working of tendering, technical submittals and procurement of large plant and equipment
Proficiency in the use of 3D/2D AutoCAD
A proven ability to develop excellent working relationships

Junior Electrical Engineer Resume Examples & Samples

Design of electrical systems and installations for various types of industrial clients including microelectronics, food and beverage, consumer products and pharmaceutical industries, datacenters, general manufacturing
Development of conceptual design and preliminary design documents
Calculations related to sizing and selection of the mentioned systems
Preparation of electrical one-line diagrams and general arrangements

Junior Electrical Engineer Resume Examples & Samples

Prepare drawings of structures, systems, maps, and/or graphs manually or with computer aided tools (CAD, etc.) while maintaining the quality, content and drafting standards
Carry out routine technical surveys, and make suggestions to modify processes
Prepare plans, designs and calculations in accordance with established standards and other specifications

Junior Electrical Engineer Resume Examples & Samples

Basic knowledge of analog, digital and embedded controller electronic design
Basic knowledge of printed circuit board Layout and schematic capture (Altium Designer and/or EasyPC)
Basic Mechanical Design CAD skills (Pro Engineer, AutoCAD)
Working knowledge of communication protocols including TCP/IP, UDP, RS232, RS485, MODBUS, USB, SPI, and I²C
Windows forms and WPF Programming (VB, C#, XAML)
Experience developing instruments used in extreme environments including for cryo-vac
Good hands on experience with machine tools and hand tools
Expertise in contamination control

Gssc Junior Electrical Engineer T Resume Examples & Samples

Apply the principles of engineering to design components and systems using applicable standards and specifications
Participate in research, planning, design and development of electrical systems
Model circuits, analyze performance data, perform data processing
Perform requirements analysis, develop source data for requirements, generate test requirements and prepare test reports
Verify designs through simulation and laboratory to ensure they meet electrical, mechanical, electromagnetic and EMI/EMC requirements
Support design process from requirements definition through integration and test
Maintain design documentation and follow configuration management requirements
Interface with AF customer
US Citizen able to obtain a US Secret Clearance

Junior Electrical Engineer Resume Examples & Samples

Simulations, building and testing of electronic circuits,
Simulations of work of electronic and electric circuits,
PCB designing and prototyping,
Technical reports preparing

Junior Electrical Engineer Resume Examples & Samples

Bachelor’s degree Electrical Engineering (BSEE)
Minimum 2 years’ experience in electrical design
EIT
Strong background in electrical generation/distribution systems for low and medium voltage, and NEC

Junior Electrical Engineer Resume Examples & Samples

Procurement of electrical equipment including follow-up (FAT)
Cooperate field implementation (SAT)
Writing scope of work
Design of electrical systems
Cooperate with third parties, project disciplines and construction site
Five (5) years relevant working experience with an engineering contractor or production company in the process industry
Knowledge of electrical system calculation
Cable calculation
Selection of electrical components
Knowledge or AREI
Instrumentation and control systems
HBO education level (Elektrotechniek) or equivalent
Good Dutch and English language skills

Junior Electrical Engineer Resume Examples & Samples

US Citizen with the ability to obtain and maintain an Interim Secret Clearance
BS in Electrical Engineering with 0-4 years experience
Possess the skills required to utilize electronics test equipment
Must have the necessary personal skills to interact with Engility team members and government/military customers and officials including the ability to prepare and brief such individuals
Capable of working independently once given direction on tasking
Experience in the use of AutoCAD drafting tools and military systems are a plus
Interest in military electronics, communication systems and avionics
Experience working with customers and developing solutions
National Instruments LabVIEW™ design

Junior Electrical Engineer Resume Examples & Samples

These entry level engineering positions will also engage in product and process improvement projects for all products within the business
Required to work with global colleagues to define and implement best design practices and common tools as defined by the Global Product Group
The ideal candidates must be highly motivated, disciplined and able to effectively assist, and at times, lead cross-functional teams to accomplish clearly defined goals and objectives that directly contribute to profitable growth in the organization
These individuals will work very closely with team members from all disciplines of the business including, marketing, production engineering, supply chain, manufacturing and quality
BS or MS Degree (electrical or mechanical engineering, physics, etc.,)
Sound people skills that build effective team environments where individuals work collaboratively to achieve a well-defined strategy
Have a customer focused mentality that fosters strong customer relationships and long-term commitments
Basic educational experience performing design work based on goal(s) or problem statements
Solid organizational and communication skills; the ideal candidates will be detail-oriented so that designs, design algorithms and test data are thoroughly documented and design requirements coordinated with all relevant disciplines
Proficiency in fundamental business tools such as Microsoft Suite applications and related business and engineering software applications (CAD/AUTOCAD, Visio, Excel, PowerPoint, Adobe, etc.)
The ability to quickly learn to use, and apply internally written programs used for transformer design
The ability to prioritize responsibilities and work independently
Must be willing and able to travel within the U.S. and internationally to vendors, customers or other ABB facilities for projects and training (5 - 10%)
Fluently speak English
Work experience in an industrial setting
Experience with Design and Process FMEA’s
Exposure to industry standards such as ANSI/IEEE C57.12.01, C57.12.51, C57.12.55, C57.12.90, C57.12.91, C57.96, C57.94, NFPA 70/National Electrical Code, UL, cUL, CSA and IEC
Working in multinational teams
Exposure to Value Engineering and Design for Manufacture practices
Experience with mechanical and/or electrical simulations

Junior Electrical Engineer Resume Examples & Samples

Design power electronic circuits that enable the launch of new products using switching mode power converters, magnetic designs, triac/FET/IGBT control circuits, resonant systems, feedback control systems, RFI/EMI filter techniques and thermal analysis. These designs must address performance objectives while meeting the size, thermal, regulatory, manufacturability, reliability, and cost objectives
Coordinate with Marketing to ensure project specifications are clear, complete, and achievable and are consistent with Voice of the Customer data
Ensure design progression via schematic design, modeling, analysis, layout, release, testing and third-party compliance
Coordinate with Sourcing personnel to ensure vendors are identified, quotations are being obtained and quality documents are being supplied
Coordinate with manufacturing personnel to ensure production site has been identified, production equipment and other requirements are being put in place and production readiness is achieved
Conduct design reviews as well as the Design and Process Failure Mode Effect Analysis (DFMEA, PFMEA) sessions to identify project risks and develop response plans
Working knowledge of Schematic Capture
Hands on experience debugging switching power converters and electronic test equipment including oscilloscopes, network and spectrum analyzers
Familiarity with thermal and reliability consideration for embedded hardware design
Familiarity with revision control systems, preferably SVN

Junior Electrical Engineer, Fpga Resume Examples & Samples

Bachelor of Science degree in Engineering and three (3) years of engineering experience OR a Master’s degree and one (1) year of related experience
Experience with circuit board design and FPGA programming
Knowledge of C++ and Altium Designer software (or similar tool)
Ability to pass an FAA Background Investigation and lift up to 75 pounds
Ability to travel on a short notice (but travel estimated at 25%)
Schematic capture and PCB layout with Altium Designer software
Test and evaluate Power conditional replacement for the Remote Monitoring Subsystem (RMS)
Provide Circuit board design and FPGA programming
Installing and assisting with the development of new system modifications, troubleshooting and restoring current ASR-9 (radar) systems
Research, evaluate and test new hardware technology that will be used to replace current obsolete components in the NAS equipment
Capture project requirements and design and develop document changes in hardware and software required for future modifications
Perform key site testing operations and responsible for preparing the modification kits that will be shipped and installed in the field
Test national modifications done to tentatively be implemented in the ASR-9

Junior Electrical Engineer Resume Examples & Samples

Assist the Lead Electrical Engineer in preparing engineering calculations such as load flow analysis and short circuit analysis
Prepare technical specifications for equipment procurement and construction contracts, and write reports for power system studies such as arc flash analysis, protective device coordination, and transient stability studies
Assist and participate in on-site commissioning activities for hands-on learning on large capital projects
A recent or soon to be graduate with a Bachelor of Science degree in Electrical Engineering
Minimum of a cumulative 3.0 GPA on a 4.0 scale
Aptitude for working on multi-disciplinary teams
Commitment to achieving engineering excellence
Ability to apply technical knowledge to various practical problems
A desire to learn and continually develop
Strong personal commitment to safety
Co-op or Summer Student experience an asset
All applications must include an academic transcript (official or unofficial) to be considered for the position

Junior Electrical Engineer Resume Examples & Samples

Use Sparton policies and procedures to complete work assignments
Design, model, simulate and test electronic circuits under guidance of other engineers
Support designs with analysis, simulations and calculations including spice and Mathcad
Create schematic drawings and support PCB design
Prepare documentation for work as required for engineering and manufacturing of products
Conduct in-house tests with guidance from other Engineers
Support Risk, failure and root cause analysis as required within the electronic engineering discipline
Support cross-departmental activities such as MRB
Provide recommendation for enhancements and cost reductions; initiate ECN’s; and identify costs
Keep accurate and complete records of engineering activities
May provide training and/or direction to technicians
May provide input to bid and proposal activities
May provide communications and/or presentations to customers, suppliers or vendors
May require participation in product field tests requiring travel

Junior Electrical Engineer Resume Examples & Samples

Knowledge of Simulation Program with Integrated Circuit Emphasis (SPICE) modeling and simulations to validate custom analog designs
Experience with the development of design and production related documentation and procedures is highly desirable
Knowledge of C++ programming
Current SECRET clearance preferred

Junior Electrical Engineer Resume Examples & Samples

Inspection and verification of incoming components
Non-Destructive Testing (NDT) including X-Ray Fluorescence, Particle Impact Noise Detection (PIND), Radiographic, Fine/Gross Leak
Development and implementation of bias board test circuits; Simple multilayer Printed Circuit Board (PCB) design and layout
Electrical verification of various electrical parts, including digital, analog, and mixed signal microcircuits and semiconductors
Test equipment setup, pilot runs, and test monitoring
Review and statistical analysis of electrical test data
Generation of test reports

Junior Electrical Engineer Resume Examples & Samples

Design new products and modify existing products to support customer, manufacturing, applicable regulatory and industry standards, and market requirements
Prepare, review, and approve the documentation required to define control products. Prepare design proposals to present to customer once concept is finalized. Support design reviews, both external and internal customers as required
Coordinate and support the prototype manufacturing of new products
Support creation and implementation of test procedures for products based on requirements and customer specifications. Provide test and evaluation support including input to ATP and QTP test plans and procedures. Monitor testing and analyze data to verify performance of the prototype product to design and customer specifications. Review and approve test reports
Lead and/or participate in internal Design Reviews. Prepare for and participate in Preliminary Design Reviews (PDRs) and Critical Design Reviews (CDRs)
Hands-on experience in prototype circuit verifications
Hands-on experience with typical electrical test & measurement equipment
Strong project management and organization skills
Strong communication skills with emphasis on technical writing and presentation
Ability to function in a fast paced environment with minimal supervision, while performing multiple tasks
Proficiency in Cadence OrCAD schematic capture & PCB Designer, PADS, and PSpice (or LTSpice)
Structured problem solving techniques and DFSS
Experience in Matlab / Simulink
4)Physical Requirements (candidates must meet these requirements)

Junior Electrical Engineer Resume Examples & Samples

The Junior Electrical Engineer candidate is responsible for supporting applied research and engineering in the development of solutions and products in the fields of chemical, biological, radiation, and nuclear detection instrumentation
The candidate takes assignments from the senior engineering, scientific, and management staff and carries out product prototype design, development, assembly and testing, data collection/analysis, field testing, modeling/simulation, and documentation
Support development and testing of radiation imaging systems, gamma/neutron detectors, analog and digital electronics, operational prototypes, and products in the field
Work closely with the science and manufacturing departments to facilitate transition of technology from the research stage to full production
Bachelor’s Degree in Engineering, Science, Math, or equivalent with 0-3 years’ experience as an Electrical Engineer supporting applied research and engineering laboratory activities
Must be able to obtain a Top Secret security clearance
Strong written and oral communication skills
Familiarity with Microsoft Office applications
Experience with electronics design and fabrication
Motivated self-starter able to work under minimal supervision
5-10% travel to customer sites required
Demonstrated leadership of small technical teams and projects
Experience with OrCAD Capture and PADS Layout tools
Experience with C/C++ programming in an embedded environment
Experience with digital interface standards (SPI, UART, I2C, USB, Ethernet)
Experience with MATLAB for mathematical modeling, analysis and visualization
Security clearance at the SECRET level or above

Junior Electrical Engineer Resume Examples & Samples

Carry out project work in all phases of a project, including construction management and drawings supporting the electrical project leader
Concept and planning development in the area of medium and low voltage
Extra Low Voltage System, lightining and lighting Design basic knowledge
Basic Calculation of energy balances and power distribution systems
Close cooperation with our international offices

Junior Electrical Engineer Resume Examples & Samples

Work on wiring designs for the various defense aircraft platforms
Work on component selections, cable routing for the aircraft wiring designs
Provide engineering test support for pre-induction testing and development of systems test procedures. Document the activities and provide report to the customer
Coordinate with the relevant stakeholders to ensure safety of designs. Provide periodic update on project progress, quality metrics, project summaries, and other related documents
Develops and maintains technical relationships / partnerships with customers, suppliers, peers, partners and team members to develop collaborative plans and execute on projects

Junior Electrical Engineer Resume Examples & Samples

Simulations and analysis of power system protection and control applications,
Digital signal processing of simulated or recorded signals,
Implementation of a selected set of algorithms in MATLAB, PSCAD or ATP-EMTP,
Technical reports preparation

Junior Electrical Engineer Resume Examples & Samples

BS in Electrical Engineering or Computer Engineering - required
Experience with electrical hardware that involves mixed signal, digital, analog, and RF circuitry - required
Proven technical writing skills
5 - 2 years working experience - preferred
Experience in the medical device industry with design control or design verification experience - preferred
Experience with electrical component-level troubleshooting - preferred
Experience in performing layout construction and evaluation of a variety of Printed Circuit Boards, fixtures, and tools - preferred

Download Junior Electrical Engineer Resume Sample as Image file