Technician, Process Resume Samples

4.8 (88 votes) for Technician, Process Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the technician, process job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
HR
H Rutherford
Howell
Rutherford
38434 Lloyd Courts
Chicago
IL
+1 (555) 619 7107
38434 Lloyd Courts
Chicago
IL
Phone
p +1 (555) 619 7107
Experience Experience
Chicago, IL
Technician, Process
Chicago, IL
Breitenberg and Sons
Chicago, IL
Technician, Process
  • Performing equipment qualification and projects work, as assigned
  • Identifying and assisting the business with the implementation of technical improvements
  • Monitoring and management of production yield performance on assigned lines
  • Analyze and improve existing manufacturing processes
  • Planning, layout and installation of processing equipment on work-stations
  • Manage business process compliance through process validation, equipment qualification, document control and equipment maintenance
  • Develop, implement and test new processes and tooling
Houston, TX
Technician Process Engineer
Houston, TX
Braun LLC
Houston, TX
Technician Process Engineer
  • Perform engineering experiments by following instructions
  • Actively participate in continuous improvement processes
  • Work with process integration teams, process development and characterization to determine inefficiencies and address across Advanced Technology Development Organization in a timely manner
  • Perform visual inspections (quality check)
  • Actively participate in continuous improvement processes and on the Emergency Response Team
  • Responsible to disposition lots by following detailed instructions
  • Process wafers using defined procedures
present
Boston, MA
Technician Process Technology
Boston, MA
Collins and Sons
present
Boston, MA
Technician Process Technology
present
  • Assisting process engineering with sampling and/or modifications to new molds and equipment
  • Maintain safe work environment and follow all safety standards
  • Performs other duties incidental to the position, as assigned
  • Maintaining an orderly, clean work area
  • Perform mold & head tooling changes
  • Provide leadership to production associates and area leaders
  • Perform mold and head tooling changes
Education Education
Bachelor’s Degree in Science
Bachelor’s Degree in Science
University of Virginia
Bachelor’s Degree in Science
Skills Skills
  • Excellent customer service and communicates very well with good interpersonal skills
  • Good knowledge of electronics and software control systems
  • Good problem solver and is analytical
  • Self-starter with demonstrated efficient work methods, analytical & problem solving skills and ability to handle multiple tasks in a fast paced environment
  • Strong communication skills with both Internal and external agents
  • AutoCAD
  • Instrumentation
  • Hydraulics
  • Calibration
  • PLCs
Create a Resume in Minutes

15 Technician, Process resume templates

1

Technician Process Resume Examples & Samples

  • O Must perform all work safely and efficiently
  • O Demonstrate willingness to communicate timely, yet prompt; candid yet accurate; and clear, yet responsive with superiors and others who have a need to know
  • O Safety awareness - Knowledge of conditions that affect employee safety
2

Technician Process & Tech NPI Silao Resume Examples & Samples

  • Consulting plant and center management regarding the projct planning and planning of new products and productions
  • Testing of new and/or improved technics regarding the blowmoulding process and further development to maturity phase
  • Consideration of guidelines and procudures, especially DIN EN ISO 14001,OHSAS 18001 and the actual version of the TS 16949
  • Responsible / Adjustment of paramenters related to the blowmoulding process
3

Technician, Process Resume Examples & Samples

  • Develop, implement and test new processes and tooling
  • Analyze and improve existing manufacturing processes
  • Facilitate process development decision making using computer skills for design and analysis (SPC, Statistical Analysis)
  • Assist in writing and preparing technical reports, qualifications and validations
  • Manage business process compliance through process validation, equipment qualification, document control and equipment maintenance
  • Maintain materials, tools and facilities necessary for production activities
  • Understand work environment issues such as OSHA regulations, FDA Quality Systems regulations and ISO requirements
  • Support all Company initiatives as identified by management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements
  • Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments
  • 2 year technical degree preferred
  • 2-4 years technician experience
  • Solid processing equipment troubleshooting and qualification skills required
  • Solid data compilation and analysis skills required
  • Solid problem solving and organization skills required
  • Ability to work in a highly matrixed and geographically diverse business environment
  • Ability to travel <1%
4

Technician Process & Tech Silao Resume Examples & Samples

  • Arrange and organize sampling from blowmoulding parts under serial conditions
  • Planning and executing from proactive and reactive improvement activities under consideration of important process key figues (e.g. OEE, rejects, process capability)
  • Planning and organisation of the maintenance, development of maintenance plans and control of related activities
  • Mistake and error proofing blowmolding machines
5

Technician, Process Resume Examples & Samples

  • Documentation administration
  • Participates in the verification of the manufacturing process of the products
  • Supports the needs detection (area, suppliers and equipment), layout changes, time studies and
  • Processes Administration
  • ISO/TL 9000
  • SMED
  • Just in time
  • Poka-Yoke
  • Continuous Improvement technics
6

Technician Process & Formulation Resume Examples & Samples

  • Assists in preparation of laboratory batch samples utilizing laboratory batch equipment
  • Supports pilot scale trials of new processes and new products consistent with business unit goals
  • Optimizes and executes experimental plans to obtain data for process design and product specifications
  • Communicates results in team meetings and through informal emails. Also writes pre-run write ups
  • Assists with plant trials of new processes and new products
  • Assists Operations and Contract Manufacturing with implementation of new or revised processes/formulations through training of manufacturing staff and on-site technical coverage of the initial production campaign
  • Maintains or improves efficiency of processes by introduction of new equipment through expense or capital projects. Develops project plans, estimates capital needed, bids out projects, and oversees contractor installation. Occasionally does own installation. Conducts start-up and shake-down on new equipment
  • Conducts all project tasks in compliance with corporate Environmental, Health, and Safety principles
  • Hands-on mechanical ability
  • Ability to use current PC-based software (e.g., Microsoft Windows, Excel, Word, PowerPoint, Access, Project, SAP, AutoCAD, etc.)
  • Ability to interpret equipment and other engineering diagrams (e.g., blueprints, P&IDs, and PFDs)
  • Demonstrated interpersonal skills and teamwork
  • Ability to work in a fast paced work environment
  • Flexibility to change priorities and/or manage multiple priorities
7

Technician Process Technology Resume Examples & Samples

  • Using appropriate media to design all facets of process tooling
  • Perform mold and head tooling changes
  • Designing and installing electrical, pneumatic, hydraulic, etc. circuits for process tooling
  • Interpreting blueprints, schematics, etc. to facilitate construction of process tooling
  • Trouble-shooting process tooling to maintain efficient, productive operations
  • Maintaining an orderly, clean work area
  • Maintaining parts inventory required for new process tooling
  • Logging and maintaining inventory, cost, etc. records
  • Assisting process engineering with sampling and/or modifications to new molds and equipment
  • Handle preventative maintenance and process set-up guidance within assigned area
  • Provide leadership to production associates and area leaders
  • Proven ability to perform maintenance technician job tasks
  • Proven ability to step into production conditions when area leader is not available
  • Identify cost reduction opportunities
  • Perform mold & head tooling changes
  • Performs other duties incidental to the position, as assigned
  • Able and willing to work overtime as job requires
  • Maintain safe work environment and follow all safety standards
  • Comply with all OSHA standards and Textron health & safety standards
  • Comply with all ISO 14001 standards
  • Comply with all TS 16949 standards
  • Identify waste minimization and material recycling
8

RCM Technician, Process Maintenance Resume Examples & Samples

  • Performs field shaft alignments and assists with field balancing of the equipment
  • Performs Root Cause Failure Analysis and communicates findings
  • Performs field measurements and data collection on vibration levels, temperatures and other operating
  • Performs an intermediate level analysis of the vibration data, looking for potential problems such as unbalance, incipient bearing failure, misalignment, etc
  • Performs other activities such as weld inspections and thickness testing as needed
  • Communicates the findings, either orally or in written reports for the record, and ensures appropriate action is taken to properly maintain equipment
  • Condition parameters on plant rotating equipment to allow the condition to be evaluated and trended
  • Vibration Analysis Level I certification
  • Minimum of 4 years equipment and/or testing experience in an industrial and/or technical laboratory setting
  • Perform basic algebra equations with some knowledge of trigonometry helpful
  • Operate a computer using basic PC software
9

E&I Technician, Process Maintenance Resume Examples & Samples

  • Assist operations, maintenance, and metallurgical groups by understanding, troubleshooting, problem solving, and optimizing instruments, equipment, and systems
  • Pull and terminate all instrumentation cable
  • Perform advance value/actuator repairs and calibration
  • Read advanced P&ID’s, loop diagrams, and schematics
  • Write and adapt calibrations and preventative procedures
  • Utilize test equipment, Electronic/Electrical theory, computer loops, and mechanical theory to calibrate Instruments
  • Perform advance troubleshooting of instrumentation
  • Perform transformer/switch gear/motor control repairs
  • Perform preventative maintenance –troubleshooting, plant process and flow, transformers, switchgear, and MCCs
  • Layout panels and cabinets
  • Comply with state and federal health and safety regulations, company policies and procedures and the company's environmental compliance policy
10

PD Technician, Process Resume Examples & Samples

  • Collects data and performs basic statistical analysis for process characterization, Cpk, and scrap reduction goals
  • Coordinates process development builds, including procurement of needed components and ensuring proper documentation is followed
  • Supports equipment/fixture development from simple production aids to full automation
  • Provides floor support for new product builds (e.g., troubleshoots equipment and manufacturing problems)
  • Additional Duties
  • Executes and documents equipment qualifications (plans, builds, and reports)
  • Assists in writing new detailed processes and implementing changes to existing documentation
  • Performs DOE/process characterization builds on pilot line
  • Interfaces with other departments to obtain/deliver materials and information
  • Generates new ideas for improving processes
  • Trains production trainers/operators/manufacturing technicians on new processes
  • Generate Change Requests ( CR )
11

Lubrication Technician, Process Maintenance Resume Examples & Samples

  • Safely perform all required duties by following Newmont and site specific safety policies and procedures. Actively seek improvements in safety and lead by example to promote a positive safety culture
  • As the lubrication technician you will be responsible for the lubrication of process equipment, collecting and processing oil samples, maintaining lubrication systems, contamination control, minimizing oil loss, performing inspections
  • Maintain lubricant storage area(s) and manage lubricant inventory
  • As part of the Condition Monitoring Team you will work closely with RCM technicians to drive continuous improvement, eliminate defects, and support root cause failure analysis initiatives
  • Earn and maintain technical and professional certifications required to support business needs
  • Experience reading technical diagrams, schematics and procedures
  • Experience with computerized maintenance management systems and manual documentation
  • Assist with a range of multi-skilled tasks associated with the role
  • Comply with state and federal health and safety regulations, company policies and procedures, and the company's environmental compliance policy
  • Previous experience in lubrication of fixed plant equipment as well as general plant maintenance and/or operations experience
  • Be a visible safety leader
  • SAP PM system experience preferred
  • Exposure to condition monitoring
  • Experience with Milling, Screening, Thickening, Conveying, Pumping, and Hydraulic Systems
  • Ability to read and understand service manuals
  • Experience in process plant commissioning would be highly regarded
12

Senior Technician Process Engineer Resume Examples & Samples

  • Able to perform shift work on a 12 hours per day shift schedule
  • Able to work in a cleanroom environment per semi-conductor protocol/requirements
  • Ability to perform work in a standing position for majority of a 12 hour shift (excluding breaks)
13

Technician, Process Resume Examples & Samples

  • This position's primary function is that of ensuring that manufacturing processes run consistently and meet performance targets
  • Actively interface with cross-functional team members and 3rd party Vendors, always practicing good team work in support of day to day operating requirements
  • Monitoring and management of production yield performance on assigned lines
  • Liaising with Team Leaders with regard to productivity and efficiency performance issues on your assigned lines
  • Engage in mechanical / electrical / electronic troubleshooting, and in resolving hardware /software interfacing problems on the production floor
  • Diagnose malfunctioning systems to identify hazards, defects and the need for adjustment or repair
  • Communicating regularly with Operators regarding issues, concerns and watch-outs on the lines
  • Test electrical systems, circuits and wiring in processing equipment and fixtures
  • Planning, layout and installation of processing equipment on work-stations
  • Responsibility for product line performance, primarily maximizing productivity of the equipment and minimizing yield loss from the process
  • Co-ordination of preventative maintenance and calibration activities on assigned lines / process
  • Identifying and assisting the business with the implementation of technical improvements
  • Identification of process equipment spares requirements, plus sourcing and replenishment of all such spares from stock in accordance with company policies
  • Performing equipment qualification and projects work, as assigned
  • Design, specification, fabrication, testing and documentation of process equipment changes and improvements
  • Adherence to Environmental Health & Safety (EHS) requirements on sites, plus communication of any concerns regarding environmental impact, health or safety issues
  • Building of Quality into all aspects of one’s work by maintaining compliance with all site and corporate Quality Management System requirements
  • Provision of out-of-hours support to the business as required by management or as mandated by shutdowns and/or equipment failures
  • Certificate/ Diploma in Engineering, Science, related discipline or hold a trade qualification in electrical, mechanical l& toolmaking or related discipline or has 2 years technician experience in a manufacturing environment
  • Good knowledge of electronics and software control systems
  • Entry level experience in a modern manufacturing environment ideally with previous experience in some or all of the following
  • Low / medium voltage electrical power systems
  • Pneumatics
  • PLCs
  • Instrumentation
  • Hydraulics
  • Calibration
  • AutoCAD
  • Injection molding
  • Experience in the medical device industry is an advantage
  • Business understanding of operations and there impacts essential
  • Flexibility essential
  • Strong communication skills with both Internal and external agents
  • Green or Black Belt 6 Sigma qualifications an advantage
  • Good problem solver and is analytical
  • Excellent customer service and communicates very well with good interpersonal skills
14

Technician, Process Resume Examples & Samples

  • Work schedule: Sunday – Thursday, 1:00pm – 9:30pm
  • BS/AS degree in science/engineering discipline
  • Semiconductor or magnetic recording head fab experience desirable
  • Experience of operating vacuum process equipment preferred
15

Technician, Process Resume Examples & Samples

  • Understand wafer equipment, process requirements and metrology tools
  • Be able to use computers and fab process software such as MITECS and Mesa for wafer processing
  • Understand the concept of statistical process control. Possess ability to learn basic data analysis software such as JMP and Excel
  • Work schedule: weekend shift, Thursday - Monday, 9:00am – 6:00pm
16

Technician, Process Resume Examples & Samples

  • Configuration, calibration and verification of the test equipments
  • Work closely with the RF Engineer and the global test engineering for configuration of the test software and verification of the test equipment after configuration
  • Preventive maintenance and breakdown maintenance for the test equipments
  • Ensure compliance to the test procedures and test equipment verification procedures
  • Work closely with the Team Leaders and Process Engineer to implement standard production processes. Ensure correct BOM, drawings, routings and Work Instructions being followed
  • Modify or develop new processes / methods, tools, fixtures or equipments for repeatable, reliable and cost effective manufacturing
  • Provide precise feedback to Process Engineer on Yield issues
  • Analyze and find root causes for the product failure. Introduce Corrective, Preventive majors and improve First Pass Yield
  • Elaborate actions plan, audits to prevent non conformity product situation. Escalate disciplinary issues to Shift Supervisor
  • Support new product introduction on manufacturing lines
  • Address Critical Machine, tool breakdowns and maintenance
  • Implement ECN
17

Technician Process Engineer Resume Examples & Samples

  • Work with process integration teams, process development and characterization to determine inefficiencies and address across Advanced Technology Development Organization in a timely manner
  • High School Degree (or equivalent) with minimum 5 years of relevant experience
  • Education - 2 Year Technical/Associates Degree in Science, Math, Engineering, Semi-Conductor Manufacturing or a related discipline or equivalent military training/experience or 5 years of relevant work experience in 300mm Fab
  • Experience on Cleans, Metro, or Litho tools
  • Proficiency with software applications; able to create reports and document procedures
18

Senior Technician Process Resume Examples & Samples

  • Set up and operation of a wide variety of manufacturing equipment to produce standard and experimental tobacco and non-tobacco products
  • Preparation of various solution batches for use in manufacturing processes
  • Operation of test instrumentation which measures the physical characteristics of in-process and finished product
  • Providing calibration and machine maintenance of processing equipment, adhering to quality systems, safety and environmental policies, procedures and work instructions
  • Minimum of 3 years of mechanical/industrial experience
  • Experience in tobacco processing operations is desired
  • Strong mechanical aptitude to set up, operate and adjust equipment used throughout our product development operations
  • Capable of understanding and following complex test plans and operating procedures
  • Knowledge of Quality Management Systems and Good Manufacturing Practices (GMP’s) desired
  • Must possess effective communication and technical skills to collaborate with management, engineers and other technicians to resolve processing problems and develop new processing capabilities
  • Proficient with Microsoft Office applications, SAP and other computer based applications such as HMI’s and PLC’s desired
  • Capable of operating forklifts and other motorized vehicles
19

Technician Process Resume Examples & Samples

  • Must have Associate Degree and 5 years’ Experience/ High School Diploma with 8 years’ experience in Process Engineering
  • At least 5 Years’ experience in Injection Molding/ Systematic Scientific Molding
  • 3-5 years of Process Troubleshooting Skills
  • Must be able to multi-task in a fast paced production environment and a Team Player
  • Good communication and leadership skills
  • Able to work safely in a production environment around moving mechanical parts, recognizing various sounds and alarms
  • Able to work overtime and Off Shift as Needed
20

Quality Technician ­ Process Resume Examples & Samples

  • Over­inspection of process according to control plans
  • Excute spc data collection according to control plan
  • Take necessary action for nonconform process and inform production to stop macihine to ensure good product quality
  • Follow the nonconformm process and report to supervisor
  • Check whether the scrap amount consitent with production record
  • Report to supervisor if any unconsistent
  • Clear and accurate information between different shift
  • Follow and feedback the resultaccording to shift change record
  • Summarise monthly the nonconform product and report to supervsor
  • Summarise monthly the nonconform process and report to supervsor
  • Participate the quality improvement