Safety Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the safety technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

C Mante

Caleb

Mante

611 Nikolaus Stravenue

Phoenix

+1 (555) 807 2358

611 Nikolaus Stravenue

Phoenix

Phone

p +1 (555) 807 2358

Experience Experience

Phoenix, AZ

Safety Technician

Phoenix, AZ

Lesch, Bruen and O'Conner

Phoenix, AZ

Safety Technician

Provides/develops technical safety training; conducts safety management training for supervisory and management personnel
Assist management to develop, analyze and provide safety recommendations
Assist in the development, implementation and maintenance of health and safety management systems for the location
Assist in the development of site safety procedures and provide training to site employees
Assist in the management of workers’ compensation program
Provide corrective action recommendations and assist in implementing metrics for tracking and reporting on performance issues
To assist line management with the identification and evaluation of high risk hazards and development of measures for their control

Boston, MA

Field Safety Technician

Boston, MA

Tillman-Mertz

Boston, MA

Field Safety Technician

Function in an advisory and consultative capacity to Site Management ensuring the safety and well-being of project personnel. Perform site inspections and audits as necessary to ensure compliance with OSHA regulations as well as KSPS EH&S Standards. Facilitate the delivery and administration of health and safety initiatives and programs on project locations
Conduct daily safety audits of major and routine CF employee and contractor work activities throughout the facility and especially in designated areas of the facility
In conjunction with other safety department personnel, develop training programs specific to areas of the complex and conduct training with area supervision that engages the employees (e.g., hands-on activities, etc.)
Assist with development of new, and revision of current, safety and health procedures to provide a safe work environment for employees
Participate in process safety management related to area processes including training, management of change, process hazards analyses, PSSR’s, etc
Assist in development/implementation of facility security procedures
Assist in development and implementation of the industrial hygiene exposure monitoring program for the designated area of the complex

present

New York, NY

Safety Technician Journey

New York, NY

Stanton-Bernier

present

New York, NY

Safety Technician Journey

present

Reviewing and reporting on the staff’s compliance with health and safety rules and recommending commendations or dismissal based on performance
Focusing on prevention by keeping up with equipment maintenance and employee training
Responsible for a particular project or worksite
Work within precise limits or standards of accuracy
Plan work and select proper tools
Attend and assist in facilitation of Safety Meetings and associate initiatives
Risk identification and management, incident reporting and investigation

Education Education

Bachelor’s Degree in Related Field

University of San Francisco

Bachelor’s Degree in Related Field

Skills Skills

Strong communication and interpersonal skills with the ability to interact with all levels of employees and outside professionals
Intermediate knowledge of occupational safety and the ability to apply this knowledge
Strong ability to work and coordinate with peers
Knowledge and ability to understand and interpret OSHA standards
Strong organizational skills, including ability to multi-task and prioritize workload
Knowledge of the basic techniques for conducting meetings and conveying technical information
Excellent interpersonal and communication skills with the ability to interact with all levels of the organization
Good communication skills, ability to teach large groups, and interact with various people on various levels
Ability to gain general knowledge of the campus
Ability to adapt quickly to changes in the business

Create a Resume in Minutes

15 Safety Technician resume templates

Read our complete resume writing guides

Safety Technician Resume Examples & Samples

Supervises installation of guards or other safety devices on machinery
Participates in preparation safety rules and promotional programs
Inspects potentially hazardous equipment or facilities, to ensure safe operation of the equipment
Evaluates personal protective equipment. Approves personal protective equipment for use in the facility
Investigates accidents and near misses to correct unsafe conditions and unsafe acts
Performs inspections of work areas
Reviews new and modified equipment prior to use to ensure compliance with legislation
Prepares and conducts safety programs
Operates the Emergency Response Plan for the safety items of the plan
Reviews admittance of new chemicals in the workplace to ensure proper documentation, handling and storage
Operates the management of safety and environmental records
Implements designs of safety devices, equipment and materials providing continuous improvement of safety systems
Directs investigation of safety events to ensure proper identification, investigation and actions
1 year of experience
Disabled employee (PCD)
Further studies are a plus (i.e. technical degree, bachelors degree, specialization courses, etc.)
Basic English skills

Principal Quality & Food Safety Technician Resume Examples & Samples

Governance of Pilot Plant GMP, Quality and Food Safety programs
Upkeep and optimization of Pilot Plant QA programs to ensure continual compliance to QMP standards
Providing technical expertise while supporting Pilot Plant trials
Calibration and operation of Pilot Plant equipment/machinery
Upkeep and cleaning of Pilot Plant area and equipment
Training of less experienced technicians
Working closely with developers and scientists to ensure collaboration and knowledge transfer
Record documentation e.g. lab book, ingredient lot tracing, experiment observations, trial results
Full compliance of all Safety policies

Radiological Safety Technician Resume Examples & Samples

Campus wide receipt and distribution of radioactive materials (RAM). This includes security inspections, contamination and radiation surveys, maintaining records, and ensuring compliance with applicable regulations. Receiving and surveying radioactive materials require careful inspection of packaging material and deciding whether package meets all regulatory requirements as stipulated in detailed procedures
Radioactive waste pickups and processing. This includes the scheduling, transportation on campus, compaction or bulking of waste, contamination and radiation surveys of waste, survey and disposal of decayed waste, and maintaining records
Selects and operates the proper portable radiation survey instruments to make, record, and interpret measurements of radiation dose rates and the presence of any radioactive contamination. Compare the results to allowable limits
Conduct general laboratory work including counting samples for radioactive contamination
Calibrate portable radiation detection instruments (Geiger Mueller, NaI detectors), review and evaluate instrument performance, track and deliver instruments
Must be legally eligible to work in the U.S
Must be willing and able to possess and maintain a current, valid State of Colorado Driver’s License within six months of hire
Must have completed at least junior level coursework in Environmental Health, Chemistry, Physics, or a related field
Must be willing and able to stand and sit for long periods, squat, bend, kneel, and walk for long periods
This position will require that you wear respiratory protection (respirator). This will require that you be medically cleared/approved to wear respiratory protection (at no expense to you). Must be willing and able to comply with this requirement
Must be willing and able to pass a pre or post placement physical and a drug test
Must be willing and able to receive vaccinations to protect against infectious disease related to their potential exposures including, but not limited to Hepatitis and TB
Must be willing and able to participate in medical surveillance as applicable to potential work exposures, which may include blood or urine collection and the administration of health questionnaires
Bachelor degree in Environmental Health or a related field
One year of radiation safety experience or coursework in radiation biology, radiation physics, radiation instrumentations
Experience working in biomedical research
Must be willing and able to lift and carry ~50lbs (e.g., when needed for waste handling and SCBA tank worn on back
Must be willing and able to push or pull (with drum dolly or other mechanical aid) up to 500 lbs
A pre-employment criminal background check will be conducted for this position. Depending on the nature, felony convictions, convictions of crimes of moral turpitude, or convictions of misdemeanors related to job duties may disqualify you from being considered for this position. Must be willing and able to submit to and pass a background check, if offered the position
Must be willing and able to physically handle hazardous materials (hazardous chemicals, radioactive isotopes, infectious agents, etc) and lift and carry up to 50 lbs
Driver's License Requirement
A current Resume/CV
The names, addresses, daytime telephone numbers and e-mail addresses for three professional references, either attached to your resume/CV or uploaded as a separate document

Radiation Safety Technician Resume Examples & Samples

Assists Research Laboratory & Safety Services in providing a safe work environment and maintaining regulatory compliance
Oversees routine waste collection facility duties, such as: laboratory waste collection, inventory, sampling, characterization, segregation, packaging, manifesting, transporting, shipping and documentation
Supports the radioactive material use laboratory inspection program by scheduling and performing laboratory visits, surveying radioactive material use areas, providing regulatory and operational guidance to customers
Handles, transports, ships, receives and transfers radioactive materials for research and medical treatment
Authors new written guidelines and updates existing written guidelines
Ability to drive according to the University Fleet Safety Policy
Ability to work in a respirator, in protective clothing, or in a warm environment
Microsoft Word, Excel and Outlook application familiarity

Safety Technician Resume Examples & Samples

Assist in the development of site safety procedures and provide training to site employees
Improve Site life critical procedures such as CSE (Confined Space Entry), Lock out- Tag out, hot work, fall protection and excavations
Conduct Industrial Hygiene monitoring throughout the plant
1-3 years industry experience in a Safety related position with appropriate education background. Strong organizational and documentation skills required along with good interaction and communication skills
Must be authorized to work in the United States

Safety Technician Resume Examples & Samples

Entry Level (Experience, training or education preferred)
Must be familiar with OSHA 1910 and 1926 regulations
Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting and lifting
Hand manipulation is required for grasping, pushing and pulling
Must be alert to site construction equipment when in the field with an occasional need to work near hazardous equipment and machinery
Must be able to walk on uneven ground and to climb stairs and ladders
Potential exposure to dust, fumes, noise and extremes in temperature or humidity
Potential work at heights

Hazmat / Safety Technician Resume Examples & Samples

Must possess and maintain working knowledge of complex and technical regulations including the customer's Hazardous Waste Management Plan, OSHA, Hazardous Material Transportation Act, EPA and other contractual requirements and other applicable base, state, federal and company
Possess ability to communicate courteously with military and DI employees
Demonstrate the ability to read, understand and follow written or oral instructions
Be knowledgeable of and follow U.S. Navy and OSHA safety standards. Possess knowledge of materials and safety instructions
Must be able to obtain and maintain a secret security clearance and flight-line driver’s license, if required
Minimum of two (2) years of experience within the last four years in the management, administration, and operation of a hazardous materials/waste program license
Must have completed 40 hours Hazwoper course and refresher as required
Must have a valid states driver’s license
Licensing, certification requirements

Life Safety Technician Resume Examples & Samples

Maintain high standard of all engineering services required for guest rooms, indoor and outdoor meetings and functions
Periodically tests fire alarms, fire detection systems, fire extinguishers, emergency lights and exit lights
Keeps maintenance and inspection records on all emergency equipment
Report work related accidents, or other injuries immediately upon occurrence to manager/supervisor
Follow policies and procedures for the safe operation and storage of tools, equipment, and machines
Identify and correct unsafe work procedures or conditions and/or report them to management and security/safety personnel
Follow property specific procedures for handling emergency situations (e.g., evacuations, medical emergencies, natural disasters)
Use proper equipment, wear appropriate personal protective clothing (PPE), and employ correct lifting procedures, as necessary, to avoid injury
Attend guest complaints as well as complaints from the other departments as directed
Participate and ensure complete success of preventive maintenance program of guest rooms, meeting rooms and function room and related areas
Maintain logged records of all equipment as directed by the electrical supervisor/engineering manager
Do a daily walk around the meeting room and function room to ensure good working condition and corrective action is taken accordingly
Maintain engineering area is safe, kept clean and in an orderly manner. Keep close coordination with other engineering staff for smooth operation
Participate in departmental meetings and training etc
Assist in energy conservation programme, follow up with banquet staff to save electricity and air conditioning when meetings are over
Comply with hotel and corporate LSOP’s and SOP’s
To attend all safety and fire training and adhere to safety instructions at work to prevent any accidents
Document all work performed and any spares used
Serve as an active member of hotel emergency response team
Carry out any requests asked of you by your immediate supervisor
Take active role in the TQM process
Your uniform should be clean at all times if you have to go to guest areas. Your uniform should be changed on a daily basis
Hygiene is of upmost importance, please make sure that you wash before coming to work and you practice good hygiene throughout your daily routine
To ensure that you maintain a high level of hospitality and guest concern. Practice at all times “Empowerment” and do whatever it takes to satisfy the guest
Accident prevention and safety to be aware of all existing departmental job safety analysis and to strive to work in an accident free manner and to create a safe working environment for himself and for others
Maintain high standard of GSS and Brand standard for guest rooms and related areas
To carry out other job assignments given by DOE/ Chief Engineer and Assistant Engineering Manager as business demands

Safety Technician Resume Examples & Samples

Provide 24/7 emergency medical services for facility personnel. Respond to emergencies as well as provide Advanced Life Support as required
Assist in the daily operations of safety department
Administer first-aid treatment and life-support care to sick or injured persons in pre-hospital setting
Perform emergency diagnostic and treatment procedures
Observe, record, and report to physician the patient's condition or injury, the treatment provided, and reactions to drugs and treatment
Assess nature and extent of illness or injury to establish and prioritize medical procedures
Communicate with dispatchers and treatment center personnel to provide information about situation, to arrange reception of victims, and to receive instructions for further treatment
Decontaminate ambulance interior following treatment of patient with infectious disease and report case to proper authorities
Operate equipment such as electrocardiograms (EKGs), external defibrillators and bag-valve mask resuscitators in advanced life-support environments

Lead Life Safety Technician Resume Examples & Samples

Associate's degree and/or vocational/technical degree required
5-8 years of Apprentice/Journeyman experience required
Certifications

Enviromental Health & Safety Technician Resume Examples & Samples

Assist with the implementation of MESH (Management System of Environmental, Safety, Security and Health) and will utilize MESH tools to drive improvements
Supports risk assessment at the location to identify critical EHS hazards and aspects
Supports tracking of appropriate leading and lagging indicators to track EHS performance
Supports tracking and accomplishment of EHS goals for the site manager and appropriate activity based goals for the leadership team, functional managers, and front-line supervisors to drive EHS culture, compliance, and results
Supports MESH element champions and facilitate their engagement in ownership of the MESH elements
Supports and promotes zero incident EHS culture throughout site
Supports EHS engagement through EHS teams and committees needed to accomplish the established targets and objectives for the year
Works with EHS leader and MESH element champions to complete an annual evaluation of compliance for EHS country, state, and local regulations
Supports efforts for third party recognition for programs that establish the site and Eaton’s EHS program as world class
Provides support on using established EHS data processes such as MESH Suite to manage data
Create training matrices and leads training sessions to ensure that all training is defined, completed, and tracked in accordance with an annual plan
Supports efforts to ensure and track that all key EHS operational controls are in place, on a PM program, and that EHS action items are resolved on a timely basis
Minimum 2 years of Environmental, Health & Safety program participation or Safety Team involvement in a manufacturing environment
Must live within a 50 mile radius of work location; no relocation benefit is provided
Must be legally authorized to work in the US without company sponsorship
Ability to identify Eaton, industry, state, and country EHS requirements. Must be proficient with MS office suite (Word, Excel & Power Point)
Able to work with well with others and engage team members to develop new processes
Able to work in the US without company sponsorship
Ability to facilitate EHS teams
Ability to utilize company-wide system for reporting EHS data and information
Ability to conduct training
2 Year Technical degree in EHS and/or pursuing 4 year degree from an accredited institution is preferred
3 years of Environmental, Health & Safety program participation or Safety Team involvement in a manufacturing environment
Experience leading teams in developing new processes is preferred
Working knowledge of OSHA and EPA regulations is preferred

Safety Technician Resume Examples & Samples

Provide advice and recommendations to individuals or groups about performing work safely
Enforce operational compliance with safety regulations and company policies and procedures
Provide safety orientation and training of employees, subcontractors and ship’s force
Manage administrative duties, maintaining databases, programs etc
Responsible to drive ethical behavior and instill a culture of Safety, Health & Environmental throughout the organization, including continuous improvement of Safety standards through the Safety Maturity Matrix
Establish and foster an environment that encourages initiative, creative thinking, collaborative action, and process improvement that results in improved product quality, performance and customer satisfaction

Field Safety Technician Resume Examples & Samples

Function in an advisory and consultative capacity to Site Management ensuring the safety and well-being of project personnel. Perform site inspections and audits as necessary to ensure compliance with OSHA regulations as well as KSPS EH&S Standards. Facilitate the delivery and administration of health and safety initiatives and programs on project locations
Able to interpret and apply OSHA regulations and industry safe work practices and Standards to construction sites
Knowledgeable of construction hazards in the refining/petrochemical industry
Ability to develop risk assessments (JSAs) and identify workplace controls to lower risk to an acceptable level
Candidates must be able to meet all company and customer qualifications to access job site including training requirements
This position is not eligible for Visa Sponsorship
Two years or more of refining or petrochemical experience in a health and safety role
OSHA 500/501 training is preferred
Basic Plus Orientation and Confined Space Training
TWIC Card

Safety Technician Resume Examples & Samples

Develop a site-specific safety and health plan
Ensure that subcontractor personnel comply with the plans and with PAE’s safety policies and procedures
Monitor and discuss safety issues with the subcontractor personnel, along with other work progress issues, at daily meetings
Conduct weekly safety meetings, recommend safety issues for discussion and obtain sign-in sheets to verify subcontractor staff attendance
Act independently as CQC while coordinating all QC functions so as not to delay construction scheduling
Inspect and review projects to monitor compliance with building and safety codes, and other customer regulations
Review and interpret contract drawings
Review provisions that have been made to provide required control inspection and testing
Prepare CQC submittal plan for project
Efficient management of project submittals
Check to assure all materials and or equipment have been tested, submitted and approved
Examine the work area to assure that all required work has been completed and is in compliance with the contract requirements and resolve any differences. - Determine, communicate, and document deficiencies and ensure they are corrected in a timely manner
Communicate with Project Manager in a clear and understandable manner about all status updates
Perform daily checks to assure control activities, including testing/compliance, and document all results
Conduct all completion inspections
Ability to work effectively around multi-cultural workforce is required
Must have good organizational and communication skills and the ability to exercise sound judgment and make decisions independently
Must be able to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules
Expert computer skills, specifically in Microsoft Word and Excel are required
Must be able to clear Minimum Risk Public Trust (MRPT) process and maintain MRPT status through out the duration of the contract
Must be willing to travel periodically (with extended overnight stays) as required while working on projects at other locations in Afghanistan

Quality Food Safety Technician Resume Examples & Samples

Monitoring and evaluating incoming raw materials, production and processing methods
Conducting analytical analyses on incoming ingredients and finished product
Measuring and monitoring environmental and plant conditions, including pre-operational startup while assisting with plant sanitation program
Conducting plant food safety and security audits and continually look for food safety hazards or places to improve plant and process
Conducting daily product evaluation and employee training in food safety, HACCP, GMPs, and SOP’s
Assisting in maintaining plant HACCP certification, PES (Product Evaluation System) and COA (Certificate of Analysis) Program
Assisting in creating, updating and reviewing SOPs
Assisting in maintaining the Pest Control program at the plant, as well as development, implementation and monitoring of an ongoing food safety program
Ensuring facility is kept clean and well organized through daily walk through and audits. Communicate with the team on deficiencies and issues
High School diploma/GED with industry experience
Strong verbal and written communication skills to convey complex and detailed information
Previously demonstrated experience working with all levels of an organization
Intermediate computer literacy Microsoft software applications

Health & Safety Technician Resume Examples & Samples

The ability to produce accurate, high quality work in a time-sensitive fast paced environment
The ability to organize, prioritize and own multiple tasks while meeting and/or exceeding deadlines
Strong communication skills and proven success in communicating effectively with all levels
Initiative and ability to work with minimal supervision and as part of a team
Conducting respiratory fit testing of all site employees and working with the medical and industrial hygiene team to stay in compliance
Coordinate annual posi-check procedures for respiratory full face masks and equipment
Perform all inspection and testing of respiratory equipment on-site
Perform all inspection and testing of fire protection equipment on-site
Filling breathing air bottles and managing off-site hydro testing
Sampling breathing air for grade D certification
Scheduling the calibration of respiratory fit testing equipment
Cleaning and preparing respiratory equipment for use
Recordkeeping of all inspection and testing devices and equipment
Performing safety audits and recording results
Fill and maintain portable eyewash/safety shower equipment
Coordinate and conduct annual safety shower inspections
Experience in a process area in a chemical plant environment
Experience relative to OSHA regulations regarding safety audits
Experience in fit testing, inspection of equipment, hydro testing etc

Quality & Food Safety Technician Resume Examples & Samples

Support the Quality Management Process (QMP) and corporate Q&FS standards implementation at site by working with SDT and Supply to rollout out new standards
Carry out internal audits as per the QMP verification program and maintain corrective/preventative action process for the local site
Coordinate inputs and compile Q&FS reviews for the site and region (where required)
Coordinate the auditing of all MARS owned warehouses and retail audits for freshness and publish results
Coordinate the daily Product Panel and provide product and pack standards for supply reference
Own NEXUS administration and document control for Q&FS and PPI
Coordinate customer and consumer complaints investigations and reporting of outcomes
Education & Professional Qualification: Bachelor in Food Science or related discipline
Mars Competencies: Customer Focus, Drive for Results, Integrity and Trust and Managing and Measuring Work
Functional Competencies: Passion for Q&FS, Product Quality Custodian, Internal Audit & Continuous Improvement

Safety Technician PNW Resume Examples & Samples

Working both with site management and corporate staff to achieve desired ESH goals of the site
Assist others in implementing and monitoring industrial safety programs to ensure compliance and personnel and site safety
Through leadership of all ESH required programs at the site, the effective employee will balance site observations, auditing, and employee coaching in day-to-day activities with documentation and development of site training and improvement areas
Prepare and retain training documents, job safety analyses, and other documents related to site safety activities as required by site management and corporate staff
Possess ability to present training programs in a manner that creates employee involvement
Participate in evaluating new equipment, materials and processes for safety
Assist others in performing surveys and inspections to ensure compliance with the organization's policies, procedures, regulations and standards related to employee safety
Must keep abreast of changes in all OSHA, VPP and State safety codes, permits and regulations
Utilize metrics to gather data and provide information to management to make decisions. Attend additional educational training as required
This position will also administer the site security program and coordinate security activities both locally and through the corporate office. This includes developing and maintaining procedures, maintaining the alarm and security systems and responding to security calls. In addition other duties may be assigned as directed by Site Manager
Lead the sites ESH programs including, industrial hygiene, worker protection standards, LOTO, vehicle safety, forklift safety, PPE, elevated work, confined space, fire protection, site security, air permit compliance, hazardous waste disposal, occupational medicine, and other OSHA/Monsanto safety programs
Lead training, audit, and educational initiatives across the site related to ESH
Work across multiple levels of leadership and the Monsanto cooperate ESH team to ensure alignment of the site policies and programs with the region
Work with the team to write and train on all site specific environmental, safety policies, procedures and forms for the site
Manage the sites industrial hygiene program including respirator use and hearing conservation
Participate in site CAPEX projects, by conducting reviews and ensure all items on the ESH reviews are addressed and prestart-up reviews are completed
Ensure contractors are qualified to be on the site and conduct work in progress audits if prearranged by the site manager
1-3 years related experience in Environmental Safety & Health
Excellent communication skills including the capability to clearly present information to persuade others through oral, written & computer generated means
Intermediate Computer Skills including outlook and Microsoft office
The ability to lead and influence others across multiple teams to implement policy, programs, and changes in the ESH field
Problem-solving and decision-making skills
Results / Detail oriented able to work with a sense of urgency
Regulatory knowledge in ESH, OSHA & Building codes

Safety Technician Resume Examples & Samples

Conducts inspections and assessments
Record keeping and other general administrative duties
Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently
Certified Journeyman - Requires attainment of NCCER certifications written and/or practical
Leadman - Provides leadership, instruction, and guidance to other craft workers in work crew, providing assistance to Foreman, while working in the capacity of a journeyman
Work within precise limits or standards of accuracy
Plan work and select proper tools
Visualize objects in three dimensions from plans and drawings
Make decisions based on measurable criteria

Safety Technician Resume Examples & Samples

Perform testing on safety equipment such as emergency shower/eyewash units and fume hoods
Interact with laboratory personnel as needed to ensure that testing operations do not interfere with laboratory activities
Enter collected data into electronic databases, spreadsheets, etc. file and maintain hard copies of testing records and logs
May be required to compile data, conduct literature searches on assigned topics, post signage, etc
Under direct supervision, conduct audits, assessments and inspections as assigned
Effective time/task management and communication skills required

Industrial Hygiene / Safety Technician Resume Examples & Samples

Degree in Safety Studies, Industrial Hygiene, or related field preferred
Requires IH - Industrial Hygiene testing experience
Previous experience with OSHA and compliance
Previous experience in a heavy manufacturing or smelter environment is very helpful

Safety Technician Resume Examples & Samples

Bachelor's degree in Safety Studies, Industrial Hygiene, or related field preferred
Previous experience with safety and industrial health programs in a manufacturing environment preferred
Working knowledge of OSHA regulations and industry consensus standards (NFPA, ANSI, etc.)
Previous experience in heavy manufacturing is very helpful
Must be willing to work overtime and off-shift to meet internal and external customer requirements
Must be willing and capable of wearing a respirator when on the production floor
Prior use of the Microsoft Office Suite; ability to formulate reports, spreadsheets, charts, and presentations

Health & Safety Technician Resume Examples & Samples

Promote that health, safety, security and environmental working conditions are followed at all times
Taking an active role on the Implementation of policies, procedures and systems to provide for a safe and secure business operation
Enforce safe working practices and ensure lost time incidents are kept to a minimum
Maintain the Company’s GSSF reputation
Develop and deliver training sessions for managers and employees
Identify and meet employee training needs in relation to Health, Safety and Environment
Apply the overall Company’s standards and guidelines on Safety Management
Perform regular audits and monitor Safety Management performance to identify areas for improvement, and ensure that appropriate corrective or preventative actions are taken, including follow-up reviews
Preparation of statistics pertaining to Safety Management for use by Company personnel and outside agencies
Participates in accident/incident investigation and reporting
Promotes that all safety & environmental issues are managed fulfilling the requirements of all the regulations applicable by international standards and National laws as appropriate
Identify that emergencies are handled fulfilling the requirements of the regulations applicable nationally & internationally. In liaison with Company personnel, ensure that Emergency Response Plans are in place, and regularly checked and tested to confirm validity and that local Emergency Response Teams are operational at all times
Bachelor´s degree in engineering (mechanical or manufacturing preferred)
Official Certification of Technician in Occupational Health and Safety
Master's degree in Occupational Safety and Environment will be a plus
3-5 years minimum related experience in a technical environment required. Preferred experience in the automotive industry, being a must having previous experience in a manufacturing company
High proficiency level in English
High proficiency level in Portuguese
Auditing techniques (Internal Auditor or equivalent)
Must have considerable problem solving skills including troubleshooting ability and be able to make decisions without having all of the information available
Must have professional interpersonal communication skills

Safety Technician Resume Examples & Samples

Deliver and pick up rental equipment
Must be able to interact with customers using good customer relations
Perform respirator fit-testing
Perform gas monitor calibration
Perform confined space attendant function where required
Successful completion in our training and certification course; provided by Airgas On-Site Safety
CDL with Hazardous Materials Endorsement
Must be able to work on a team

Safety Technician Journey Resume Examples & Samples

Responsible for a particular project or worksite
Risk identification and management, incident reporting and investigation
Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties as required

Safety Technician Resume Examples & Samples

Minimum 2 years experience in Engineering Department in a luxury property preferred
Strong interpersonal and problem solving abilities necessary
Interpersonal written and verbal communication skills
Required trade license or certification or Diploma etc

Safety Technician Resume Examples & Samples

Trained in accordance with Job Responsibility's, and applicable specifications
In house CWI, and CWS preferred
Training experience preferred
QA experience, craft experience
Able to perform various training classes as needed
Coordinate with departments to understand their individual training needs
Ability to work with all crafts to assist with process improvement
Is able to report on progress and reevaluate current state at a quarterly meeting with plant management
Prefer strong analytical, communication and problem solving skills
Must have the ability to work independently but also spend time in other work areas coordinating with plant supervisors, trainers and employees
Ability to manage time effectively and strong attention to detail a must
Working knowledge of computer applications including MS Word, database management and Excel

Safety Technician Resume Examples & Samples

Follow safety work rules and complete job tasks in a safe manner at all times
Prepare written safety and health programs and policies
Provide technical support to plant personnel to ensure compliance with applicable occupational safety and health regulations
Identify company safety training needs and develop, coordinate, and deliver safety training programs
Serve as member of the Safety Committee and ensure plant preparedness for internal/external safety audits. Will be responsible for meeting minutes and updating safety inspection reports
Understand Federal and State occupational safety and health regulations and monitor regulatory changes (through Federal Register, etc.) as they occur. Responsible for maintaining records for regulatory mandated programs such as but not limited to: respiratory protection, blood borne pathogens, hearing conversation and OSHA recordkeeping/AON
Monitor lost-time injuries/illnesses, employees on transitional duty, and Worker's Compensation Claims for plant
Promote safety and health awareness through internal newsletters, and specific training programs
Serve as liaison with medical department to review standard operating procedures relative to safety and employee health and wellness
Advise plant personnel of regulatory changes with which the plant must comply. Conducts surveillance/compliance of/for things such as hot work permits, asbestos, powered industrial equipment and heat stress
Periodically audit practices and records of manufacturing plant to ensure compliance with company programs and Federal/State occupational safety and health regulations
Coordinate employee audiometric testing, shoe fair, and maintain safety library (e.g. videos, regulations, reference manuals)
Assist in the development of the annual plant safety and health goals
Performs other tasks as assigned by the Safety Manager
High School Diploma Required. Associate's degree from a two-year accredited college or university in a safety/engineering/industrial hygiene field preferred (or equivalent combination of education and experience)
Years of relevant experience: 2 years of previous safety related experience in a manufacturing environment (Prior experience in food manufacturing/consumer product industry is preferred)
Prior experience with lean manufacturing / TPM / Six Sigma skills preferred
Knowledge of the basic techniques for conducting meetings and conveying technical information
Ability to assess and respond appropriately to critical safety issues
Strong ability to work and coordinate with peers
Ability to provide useful advice or to facilitate discussion with departments regarding future needs or changes related to safety
Ability to quickly absorb and learn new technologies, software and hardware components, and anticipate future applicability to support the business’ direction
Ability to prepare complex, written reports
Ability to assume a leadership role, as needed, as a member and/or leader of project team
Exceptional interpersonal skills, including excellent verbal and written communication abilities. Must demonstrate active listening and strong facilitation and conflict resolution skills
Proficiency with MS Office applications, including Word, PowerPoint and Excel. Prior MS Sharepoint, Kronos and SAP experience is preferred
Ability to thrive in a fast-paced, team environment that operates on a 24/7 schedule. Position requires an individual to work different schedules and varying hours

Safety Technician Journey Resume Examples & Samples

Support administrative efforts within the Environmental, Health, and Safety team
Facilitate use and understanding of the Cintellate database
Facilitate use and understanding of the CB&I ICare Leading Indicator program
Complete various monitoring and record keeping tasks in support of the department
Attend and assist in facilitation of Safety Meetings and associate initiatives
Maintain Administrative supplies
Arrange lunches meetings, events as needed to support HSE functions
All other duties assigned
Minimum 5 years of experience in an administrative assistant role within a construction field office setting
Proficiency/Experience with Microsoft Office Suite to include: Word (letter/document creation), Excel (chart, graph and table creation), PowerPoint (presentation preparation) and Outlook (email, scheduling and calendar management)
College degree in related field
Awareness and understanding of HSE policy/procedures, and management system
Basic knowledge of federal and state environmental regulations

Safety Technician Resume Examples & Samples

Minimum 5 years related experience in Environmental Safety & Health
Proficient in MS Office programs (Word, Excel, PowerPoint, and Outlook)
The ability to lead and influence others across multiple teams to implement policy, programs and changes in the ESH field
Strong organizational, coordination, planning and problem solving skills
Results/Detail oriented able to work with a sense of urgency
Regulatory knowledge in ES&H, Fed and Cal OSHA & building codes
Ability to analyze data and complete regulatory permits and correspondence
Ability to adapt quickly to changes in the business
Experience in a wide variety of safety programs
Knowledge of greenhouses and facility/farm equipment a plus
Ability to read/write/speak Spanish a plus
Lean/Six sigma training
CSP Accreditation

Ehss Safety Technician, Gigafactory Resume Examples & Samples

Perform technical duties in the fields of industrial hygiene, safety engineering, environmental sanitation, fire protection and/or radiological health
Examine credentials, licenses, or permits to ensure compliance with company, state and federal requirements
Help direct HAZMAT, rescue and firefighting operations in the event of an emergency
Plan emergency response drills
Prepare and calibrate equipment used to collect and analyze samples
Utilizes detailed instructions on SOPs to perform activities
Complete assigned projects within their level of scope
Conducts PM's, inspections, data gathering and input
Build tooling and equipment to support day-to-day health and safety operations
Work with, and help develop specialized fixtures and test equipment
Maintain proficiency as a key ERT member

Food Safety Technician Resume Examples & Samples

Perform tests and use special equipment to ensure package and product quality
Keep daily records of tests performed and results
Follow process guidelines and expedite quality concerns to management
Build good working relationships with quality, production, and maintenance team members
Complete all of the paper to keep a record of the production day
Perform the pre-op inspection on time, making sure that the document is completed BEFORE the line starts
They have to calibrate equipment on a daily basis
Communicate with the supervisor in case of deviation
Manzana Food Products charges all employees with the responsibility to fully participate in all company policy and program initiatives for Food Legality, Food Safety, Food Quality and Food Defense; each employee, no matter their position or job function serves a key role in contributing to safe, quality food

Safety Technician Resume Examples & Samples

Maintain and enforce all SBA and OSHA safe work practices
Perform detailed Jobsite Safety Inspections, specified by his/her direct report
Interpret Federal, State and Local Environmental, Safety and Health Standards
Complete reports and assist Health and Safety Managers with employee training
Interpret USDOT regulations
Communicate safety regulations including federal, state, company and client procedures with internal crews and subcontractors
Coordinate with management to investigate accidents
3+ years of experience in the Telecommunications industry preferred
Safety background preferred but not required
Climbing experience strongly preferred
Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
Ability to calculate figures and amounts such as discounts, interest, proportions, percentages, area and volume
Visual ability correctable to 20/20
Ability to operate a motor vehicle
Ability to respond verbally in an understandable, professional manner in person and over the telephone
Manual dexterity to input data into the computer
Ability to stoop and bend
Ability to reach and stretch
Ability to walk and stand
Ability to climb towers (high elevation)
Ability to drive long distances
Extensive travel required
Ability to lift up to 75 lbs
Noise Level
Weather
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Please view Equal Employment Opportunity Posters provided by OFCCP

Lab / Quality Food Safety Technician Resume Examples & Samples

Coordinating daily management of the food review, and coordinating shipment of product for corporate food review
Assisting production with quality issues and adverse event protocols
Performing hourly testing and recording moisture levels
Inputting Production Evaluation System and QAR results
Administering quality record management program
Assisting with plant self-inspection program, audits, product traceability exercises and maintaining the Master Sanitation Schedule
Generating and performing environmental swabbing
Monitoring batter temperatures and recommending equipment cleaning frequencies
Maintaining and monitoring company deviation/hold program
Maintaining numerous spreadsheets to track product quality trending
Managing the Quality and Food Safety bulletin boards
Performing general office duties, as needed
High School Diploma or General Equivalency Diploma (GED)
Basic computer skills including Microsoft Office
Effective communication, interpersonal, technical, problem solving, time management and organizational skills
Physically must be able to stand for long hours and be able to lift at or above waist at a maximum of fifty pounds

Safety Technician Resume Examples & Samples

Conducting daily Safety walk-thru inspections of manufacturing areas. Documenting and assigning corrective actions to the appropriate team personnel
Coaching and providing feedback to employees regarding safe work behavior and safe work procedures
Working with cross functional teams (Manufacturing Management, EHS, Facilities, MFE, Product Engineering, Pilot Manufacturing, Security etc.) on daily basis to drive the correction of safety hazards and employee concerns
Conducting a walking tour and Manufacturing New Hire Safety Orientation and general awareness training for all employees, contractors and visitors requiring access to Manufacturing areas
Providing 24/7/365 on-call coverage/support/consultation for Safety related issues in Manufacturing
Chairing Manufacturing Safety Committee meetings on night shift
Conducting Manufacturing Safety Standdown meetings/announcements, as needed
Leading CPR AED First Aid training in support of Electrical Safety program and other safety related training
Initiates Purchase Requisitions and administrates issuing Manufacturing required PPE and Safety equipment per Lam policy
Act as a MERT/ERT team member. Must be able to completed 8 hour OSHA Hazwoper training
Minimum of 6 years of related experience (education and certifications may be considered in place of years of experience)
American Heart Association’s Heart Saver CPR training
Training delivery skills
Coaching experience in a manufacturing environment
Ergonomic assessment experience, training, and/or certification
American Heart Association’s CPR Trainer certification
Ability to work with all levels of an organization (from line employees to executive level)
Training development skills

Health & Safety Technician Resume Examples & Samples

CPR/First/AED certification
Sound judgment and ability to manage crisis situations
Computer proficiency in Outlook, Microsoft Office, PeopleSoft and Kronos
Knowledge of state Worker’s Compensation law, OSHA Regulations and other occupational health regulations strongly preferred
Certification in Breath Alcohol Testing, Urine Drug Screen Collection and Hearing Conservation
Second shift (3:00 p.m. – 11:30 p.m. ) with weekend work required

Safety Technician Intern Resume Examples & Samples

Strong verbal and/or written communications skills in English along with demonstrated organizational and leadership skills working in a highly matrix environment
Ability to pass medical monitoring by Intel OH or an equivalent job for Manufacturing MT
Working knowledge of the ERT Incident and Command Structure
Competent in Microsoft Office* Suite Outlook*, Word*, Excel*, and PowerPoint*
Ability to influence the Manufacturing Management Team and Support Organizations, including outside agencies
Presentation skills. Able to deliver concise information to audience with wide range of experience knowledge
Enthusiastic, self-motivated, and outgoing team leader with strong motivational skills
Prior leadership roles within the last five years and knowledge of OSHA regulations would be an added advantage

Field Safety Technician Resume Examples & Samples

Take phone calls and instructions from sales force to determine customer requirements on service orders
Help schedule service jobs both in-house and in the field jobs
Communicate status of assigned jobs to the shop/field mechanics, customer, other service coordinators/schedulers, and sales personnel
Quote/Order parts and materials needed for service jobs
Notify shipping and receiving to move staged jobs to the service area
Provide shop personnel with drawings, breakdowns, IOM's, inspection checklist, and customer complaints or symptoms of equipment for repair
Coordinate shipment of the finished jobs with shipping and receiving department
Check finished jobs before shipment, including repair checklist, and digital picture
Coordinate return of leftover material from jobs
Invoice jobs, including invoicing checklist
Maintain the shop files
Extremely customer-service oriented
Experience in pump and various rotating equipment
Organized and detail oriented
Ability to function and contribute in a team environment

Safety Technician Resume Examples & Samples

Conduct regular walk through inspections of construction areas
Identify, document and recommend resolution of hazardous/potential hazardous conditions; follow through to insure corrections have been made
Investigate personal injury and property damage accidents
Conduct various industrial hygiene samplings, such as gas, 02, noise test to insure safe working conditions
Assist in conducting employee/craft and insurance inspectors on walk through tours. May accompany federal, state and insurance inspectors on walk through tours
Assist in emergency rescues as required. Assist in maintaining fire protection and grounding systems

Safety Technician Resume Examples & Samples

Requires previous experience with safety and industrial health programs in a manufacturing environment
Experience working in a Manufacturing Environment
Must be willing to wear a full face respirator when on the production floor

Safety Technician Resume Examples & Samples

Assists in preparing for and responding to emergencies including hazardous materials incidents. Participates in emergency drills including fire drills
Individual may be on-call or emergency situations may require the individual to respond at times outside of set work schedule
This position is designated as essential. Personnel in designated essential positions are expected to report to work as required in the event of an emergency to sustain institutional services or protect assets
Maintain working knowledge of Landauer system; coordinate meetings with Landauer representatives and Radiation Safety Officers (RSO)
Maintain certain aspects of dosimetry program; receiving and delivering dosimeters; documentation as required by the State, issue and delete dosimeters; liaison/train badge monitors, consult with Radiation Safety Officers, and process annual reports
Manage on-line dosimetry training for University and assist contracted facilities with on-line dosimetry training
Provide dosimetry training in a classroom setting
Maintain knowledge/expertise on existing/proposed changes in radiation safety regulations; interpret and apply relevant laws and regulations
Process payments for dosimeters
Coordinate meetings required by the radiation safety office
Prepare reports for quarterly Radiation Safety Committee meeting
Assist with issuing Radiation safety and MR safety training, documentation of training and MR access
Perform miscellaneous job related duties as assigned

Safety Technician Resume Examples & Samples

Advocate for employee health and safety
Provide minor treatment to workers after accidents or injuries
Identifies and implements appropriate safety controls
Lead and support safety initiatives within manufacturing; through communicating and reinforcing the plant safety culture
Assist in the development, implementation and maintenance of health and safety management systems for the location
Assist in the management of workers’ compensation program
Facilitate EHS training for site employees and maximize the use of standardized training
Assist with the record keeping, reporting, and maintenance of records to maintain compliance with site regulatory permits
Assist in the investigation of accidents
Assist management to develop, analyze and provide safety recommendations
Coordinate emergency procedures
Certified EMT or Paramedic, or 2 years safety experience
Demonstrated successful ability to lead people and get results through others
Experience in employee training
Strong problem-solving and analytical skills
Strong organizational skills, including ability to multi-task and prioritize workload
Associates Degree in a health, safety, or related field
Experience creating safe and positive work environments in a manufacturing setting
Computer literacy including Microsoft Office Products, Kronos Timekeeping and PeopleSoft

Material Safety Technician Resume Examples & Samples

Perform daily walk thru to check for items needing attention or safety issues in the chemical bunkers, production and chase areas
Maintain chemical stock levels in bunkers, distributed cabinets and CDU unit, to include inventory control, ordering, receiving & distribution of chemicals
Collect, segregate, triple rinse and dispose of empty chemical bottles
Adjust chemical inventory for FIFO, restock chemical inventory and store overflow inventory
Utilize safety equipment as required
Assist gas technicians as needed on gas bottle changes or cabinet/panel issues
Maintain chemical inventory database
Perform maintenance and repairs to chemical distribution units as required
Generate and distribute chemical usage reports
Perform minor maintenance and repair of various facilities systems and infrastructure as required
Perform installations and adjustments of cleanroom equipment, furniture and systems as required
Perform exterior maintenance and repairs as required
Operate various vehicles and power machinery such as: golf carts, lift truck, pick-up truck and van along with the use of various powered and manual hand tools
Ensure all health, safety and environmental guidelines and practices, including those related to waste and materials handling and disposal, are followed
Other duties and tasks as needed

Sulfonamides Health & Safety Technician Resume Examples & Samples

Plan, facilitate, and participate in plant EH&S performance improvement efforts
Participate in and facilitate root cause investigations
Conduct internal plant audits and assessments (e.g. safety, housekeeping, life critical standard, and compliance)
Creation and presentation of high quality monthly safety meetings
Update, maintain and rollout of new EH&S Safety Standards, tools and work processes
Completion of corrective actions from audits, assessments and incident investigations
Work a turnaround schedule, including overtime and weekends, to provide H&S support during turnaround activities
Review H&S procedure review in the MOC tool
Be the focal point for the facility CTT list
Be the focal point for the facility IH monitoring program
A minimum of 2 years or equivalent in a chemical manufacturing or similar process
Strong reading comprehension and listening skills
Demonstrate leadership skills, inspire others and lead then through change
Able to work with an empowered team environment
A self-starter who can identify, prioritize and accomplish multiple tasks
Must be able to willing and able to work in such environments working in tight or closed-in spaces
4 years or equivalent in a chemical manufacturing process
Previous experience working with Dow’s life critical work processes

Health & Safety Technician Resume Examples & Samples

Two (2) years of experience in the Health & Safety industry, including one (1) year of Safety related experience such as Emergency Response or coordinating Safety activities for a crew or team, OR
Bachelor's degree in Health & Safety or a related field and no experience
Knowledge of occupational hazards and safety precautions
Knowledge of applicable federal, state and local laws, ordinances, statutes, regulations, rules, policies and procedures
Knowledge of chemical analysis techniques, equipment and processes
Ability to analyze information of routine difficulty and draw conclusions
Ability to maintain inspection records
Ability to communicate in one-on-one and group situations
Ability to develop and maintain awareness of occupational hazards and safety precautions
Ability to communicate effectively, both orally and in writing
Knowledge of Microsoft Office applications
Work is performed in a mine or manufacturing plant which may include exposure to extremes in temperature and humidity, moving mechanical parts, risk of electrical shock, toxic chemicals, explosives, fumes or airborne particles
Occasionally may be required to lift moderately heavy to heavy objects up to fifty (50) pounds during the course of the workday
Personal protective equipment is required on a regular basis, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, rubber steel-toe boots, protective clothing, gloves and other protective equipment as required
Freeport-McMoRan promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing as per applicable State Laws

Temporary Safety Technician Resume Examples & Samples

Occupational Health and Safety Degree an asset
2-3 years’ experience in Field Safety, preferrably in construction, oil and gas, or pipeline related
OSHA 10 and OSHA 30 certification required
Excavation, confined space entry, and competent person training highly preferred
Valid driver’s license with good standing driver’s abstract
Willing to travel overnight 90-100%
Knowledge of Microsoft office applications
Ability to maintain a high level of accuracy confidentiality concerning employee files
Demonstrable experience of working in an advisory capacity in Health & Safety
The ability to demonstrate the application of risk assessment to company operations and activities

Seeds´ Work Safety Technician Resume Examples & Samples

Ensure the integrity of employees with HSE policies, through training, orientation and meetings, as well as identifying and seeking to correct inadequate conditions
Propose improvements in the manufacturing environment that reduce risks by promoting safety and health
Accompany, propose, develop programs and audit the processes focused on HSE in the Unit and suppliers
Ensure compliance with Labor Legislation in the areas of training, provision of PPE, environmental monitoring of activities and Syngenta employees and third parties of the Production Unit
Inspect the areas, workplaces, checking the correct use of PPE'S, acts and unsafe conditions, promoting continuous improvement in the processes, as well as realizing the distribution of safety equipment
Prepare and deliver meetings and training on Syngenta's policy on HSE (Safety, Health and Environment), disseminating safety standards and procedures, with a view to developing a preventive attitude
Inspect fire protection equipment, as well as equipment listed, to reduce the risks to safety and physical integrity
Collaborate on projects for land modifications or new installations of the company
Investigate causes of occupational diseases and incidents, through the analysis of the environment, data collection, aiming at adequate conditions
Integrate with new collaborators and service providers, in order to guide them about the rules and procedures of the company
Follow CIPA programs, attend meetings and propose improvements in HSE
Accompany the preparation of the PPRA, LTCAT, PCMSO, as well as follow the application, aiming to comply with the legislation and the integrity of the workers
Monitor and control the unit's waste storage
Monitor and implement HSE internal Audit actions
Elaborate and conduct HSE training aimed at meeting company standards in the current legislation of the Ministry of Labor
Prepare the monthly report of the Pyramid of Security, as well as carry out investigations of the incidents and almost incidents that occurred in the period
Provide information, data and HSE indicators for the preparation of annual HSE reports
Collect and update HSE information, data and indicators for management reporting
Technician with Training in Occupational Safety
Availability to work in any of the 3 available shifts (8:00 a.m. to 4:00 p.m., 4:00 p.m. to 6:00 p.m., and 00:00 to 8:00 a.m.)
Experience of at least 2 years (desirable)
National driver's license category B (mandatory)
Intermediate Domain of the Office Package (mandatory)
Preferably with SAP knowledge
Fluent Portuguese
Basic English
Organization and discipline
Team work skills
Proactivity

Safety Technician Resume Examples & Samples

Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment
4 years and above documented field experience in chosen craft discipline
NCCER certification
Ability to read and interpret instructions
Ability to document, plan and perform work activities independently

Safety Technician Resume Examples & Samples

Daily, weekly, monthly, and annual inspections/audits as necessary to comply with Local, State and Federal regulations
Maintain safety program to cover material handling devices, cranes, forklifts, belts, slings, ladders, etc
Maintain safety program for shop equipment and tool safeguards such as shields, guards, barriers, alarms, and safe operating conditions of each
Maintain program for the proper use and wear of Personal Protective Equipment (PPE)
Perform audits of safe work practices and recommend corrective action
Monitor, maintain and enforce corporate policies and governmental regulations. Submits reports and recommendations to plant management
Support the maintenance and implementation of EHS programs, compliance plans and initiatives (Level II & III)
Lead the incident analysis process for all incidents and and near hits
Conduct, coordinate and track various training to support company programs and compliance
Conduct routine safety and environmental observations to ensure compliance with regulatory agencies, company EHS policies, procedures and practices
Assist with the data collection to maintain internal and regulatory safety, environmental and sustainability reports
Lead and participate EHS program and compliance schedule for activities such as, (START, risk assessments, ergonomic assessments, JSEA’s, PPE assessments, and LOTO procedures) as part of the transformation plan and strategy development initiatives championed by our Corporate Team
Assist with monitoring the environmental programs to include – air, waste, and storm water
Serve as primary contact for all regulatory agency inspections, permitting and reporting (air, waste, and water)
Ability to foster behavior based programs and encourages employee involvement
Lead the toolbox talk program
Manage the facility’s MSDS program
Attend and participate in all EHS corporate meetings and conferences
Working knowledge of Microsoft Office applications
Strong communication and interpersonal skills with the ability to interact with all levels of employees and outside professionals
Must demonstrate the ability to manage multiple tasks and determine priorities
Ability to develop processes from conception through integration into an EHS Management System
Associate's Degree in Occupational Health and/or Safety Management, Industrial Safety or Hygiene, Environmental Management and/or equivalently related degree required. Bachelor’s Degree preferred
Bi-lingual (English/Spanish) is a plus
Minimum 1-3 years of experience in a manufacturing or related environment
Minimum 1-3 years of experience working with a EHS Management Systems
CSP and/or CIH certification and OHSAS 18001 and VPP experience is preferred
Experience with incident management databases and MSDS systems are highly desirable

Health & Safety Technician Resume Examples & Samples

Willing and able to gain first aid certification and train-the-trainer certification
Experience with Microsoft Office Word (i.e. creating documents), Excel (i.e. creating spreadsheets, utilizing formulas, and Outlook (i.e. scheduling meeting invites & e-mailing)
Experience with training employees on health and safety awareness
Experience with incident investigation including root cause identification and corrective action formulation
Experience with hazard identification and assessment
Willing and able to work any shift, on-call, holidays, weekends and overtime as needed
Associate’s degree or higher in Safety & Health or Environmental Science
At least two (2) years of Safety & Health experience in an industrial or manufacturing environment

Safety Technician Resume Examples & Samples

Implement and oversee the Project Safety Program including the development of site safety policies and procedures
Knowledge of construction safety, current federal and OSHA requirements
Ability to travel and relocate as required

Safety Technician Resume Examples & Samples

To assist corporate and line management in assessing the effectiveness of the unit safety and health programs and providing recommendations for maintaining/improving their effectiveness
To provide guidance to line management and employees so that they understand the safety and health programs and how to implement them
To assist line management with the identification and evaluation of high risk hazards and development of measures for their control
To provide staff safety and health engineering services
To maintain a working knowledge and maintain federal, state and local relationships with appropriate regulatory agencies
To develop and maintain a high level of professional competence in the safety and health field
To represent the organization in safety and health interests outside their operations within the community and by active participation in professional societies and specific trade associations and groups
Excellent written and spoken communication skills in order to explain health and safety processes to a wide range of people and to give presentations to groups
Negotiating skills to convince managers of the need to implement and maintain safety standards that may compromise speed or efficiency in the organization
Patience and diplomacy with a collaborative approach
Ability to understand and analyze complex information and present it simply and accurately
An investigative mind
IT skills
A flexible approach to work
An interest in the law and the ability to understand regulations

Health & Safety Technician Resume Examples & Samples

3-5 years combination of industry experience in an environmental or safety position preferred
Bachelor’s degree in Environmental, Safety/Health related field preferred
Must be able to communicate effectively with all levels of staff, vendors, and contractors; be respectful and encourage the same of others
Must be capable of creating quality work while meeting deadlines. Must be able to communicate effectively with all levels of staff, vendors, and contractors; be respectful and encourage the same of others

Safety Technician Journey Resume Examples & Samples

Assessing risk and possible safety hazards of all aspects of operations
Focusing on prevention by keeping up with equipment maintenance and employee training
Presenting safety principles to staff in meetings or lecture-typ0e training sessions
Sharing information, suggestions, and observations with project leadership to create consistency in safety standards throughout the production team and the entire company consistency in safety standards throughout the production team and the entire company
Investing causes of accidents and other unsafe conditions on the job site
Finding the best way to prevent future accidents

HS & E Safety Technician Resume Examples & Samples

Assist and support the HS&E Supervisor/Manager with the development and implementation of policies, programs and procedures for compliance with HS&E requirements of the company and regulatory agencies (local, state/provincial and national)
Support site with achievement of HS&E objectives and targets
Support in the recognition, evaluation and control of work processes with potential hazard/risk exposures relative to safety and the environment
Conduct initial hazard/risk assessments and re-assessments of operations
Conduct various safety and environmental related sampling and analysis procedures as defined in operation protocols, procedures and work instructions
Support with managing HS&E related documentation as directed
Assist with developing and providing HS&E related training to employees and supervision personnel. Track training implementation and report status of training activities
Assist with various HS&E related audits and inspections
Participate on the sites HS&E related teams/committees and support their activities and efforts
Support plant wide emergency response procedures
Support incident investigation and corrective action activities
Manage the facility chemical management system to include tracking of all chemicals used at the facility and the related Material Safety Data Sheets (MSDS)
Support the management of all waste disposal activities at the facility including but not limited to trash, cardboard, bio-hazard, waste water, waste oil, and hazardous waste
Support other HS&E related activities as directed
Use and maintain various computer databases as applicable
Be computer literate in use of Microsoft Word, Excel and PowerPoint
Inter-office correspondence, written as necessary
Utilize the HS&E data management website

Safety Technician Resume Examples & Samples

Demonstrate thorough knowledge of expected SH&E practices and behaviors
Implement and participate in company SH&E policies, processes and procedures including but not limited to
Provide key support to all SH&E systems as directed
Demonstrate knowledge of environmental best practices
Support site ISO 14001/18001 certification, document control process, and record maintenance
Troubleshoot various environmental conditions and take appropriate levels of corrective action
Provide key support with all Environmental Management System policies and procedures including but not all inclusive
5 + years experience in manufacturing. General knowledge of plant operations including Maintenance, Sanitation, Warehouse, Refrigeration, and Production
Must have solid track record for SH&E, having served as a SH&E representative or committee member is considered helpful
First Aid/CPR/AED or higher certification will be required
Able to live the Nestlé Leadership Principles and bring it to life for others
Understand the safe operation and environmental impacts of all equipment and processes
Ability to actively participate in and contribute to meetings
Displays and maintains a professional attitude at all times
Maintains effective working relationships within and outside the department
Communicates effectively with various support groups, supervisors and team members

Duf-mcs Health & Safety Technician Senior Resume Examples & Samples

Promotes responsible empowerment and the core values: safety, integrity, accountability, teamwork, excellence, and leadership
Uses approved work packages and procedures, conducts radiological field monitoring and job coverage in support of the DUF6 radiological control program
Collects air samples, conducts removable and fixed contamination surveys and performs dose rate surveys
Performs air sample analysis, smear counting, and spectral analysis
Performs pre-job walk-downs and develops Radiological Work Permits (RWP)
Maintains performance tests and operates radiological monitoring equipment
Performs HIS-20 database input, generates survey records and reports, and facilitates record archival
Develops and reviews procedures relating to Environmental, Safety and Health (ES&H)
Interacts with Work Control, Engineering, and Maintenance to plan and to provide technical input into work package development in accordance with the principles of Integrated Safety Management
Conducts radiological safety walk-downs
Provides worker feedback and guidance with regard to real or perceived radiological safety issues
Stops/suspends work of unsafe conditions potentially affecting personnel safety or environmental risk
Champion integrated safety management with the workforce

Amsec Safety Technician Resume Examples & Samples

Ability to stand up and speak in front of people (training)
Able to interface with senior internal and external personnel
Possess good writing skills
Possess basic computer skills
Ability to participate in safety investigations

Safety Technician Resume Examples & Samples

Daily survey and inspection of a variety of working environments and sites. Ensuring compliance with promulgated safety and health regulations, as well as company policies and procedures. Facilitating correction of hazards and infractions found or ceasing operations until properly corrected. Several general areas, of many, of concern are: life and safety codes, safe work practices, personal protective equipment, slips, trips and fall protection, fire protection, confined space entry, hazardous communication standards, insulation and coatings, electrical safety, equipment, etc. Perform required facility audits and inspections both internally and with regulatory inspectors
Safety orientation and training of employees, subcontractors and ship’s force / crew. Areas of training include, but are not limited to: company injury and illness prevention plan, safe work habits and attitudes, confined space entry, personal fall arrest systems, hazardous communications, lock-out / tag-out, etc
Company representative. Continuous interaction with customer (US Navy, SWRMC, etc.), company employees, subcontractors, vendors, Federal and California OSHA Compliance Officers and visitors to the facility and other locations
Administrative duties. Knowledge and skills of computer use and programs using Microsoft Windows and Office, especially Word and Excel. Maintain several required databases. Maintain, audit, collect and research Material Safety Data Sheets and library. Research safety and health issues for concerns and gang box topics. Archiving, report writing and maintaining departmental files for ships, subcontractors, etc. Ensure department is properly supplied and maintained
Respirator Fit Test Instructor. Instruct employees the proper use of respirators, the workings and care of respirators, reviewing questionnaires, performing actual fit test and maintaining required database
Responding to all incidents, accident, injuries and emergencies in facility or any project the company is working. Response may be required any time, day or night. Conducting investigations in all areas as to cause, corrective actions, and ways of prevention, writing reports for such incidents and distributing
Industrial Hygiene Practices. Perform testing in various environments and locations for, but not limited to, noise, emissions, illumination, safe work practices, etc. Collect, prepare and send out samples for laboratory analysis including, but not limited to heavy metals, PCB’s etc. Retrieving, interpreting, relaying and maintaining results. Ensuring proper working environments are established and maintained
Ship Yard Competent Person. Ensure compliance with Certified Marine Chemists direction pertaining to the National Fire Protection Association code of regulations concerning confined spaces and hot work on board ships. Including the testing and entry of confined spaces, documentation, maintaining required equipment and annual rectification
Completed or in the process of completing courses in Occupational Health and Safety
Computer experience necessary especially Microsoft Word and Excel
Maritime knowledge a plus but not necessary
Job requires a higher level of fitness than most due to the nature of work, locations where work is being performed, and the nature of getting to those locations
Good communication skills, ability to teach large groups, and interact with various people on various levels
Previous military experience a plus
CPR/First Aid certification a plus, but not required

Field Safety Technician Resume Examples & Samples

Promote safe work practices and conditions within the complex by coaching employees (i.e., using communication skills, mentoring, developing trust, etc.)
Retain an overall understanding of Woodward Complex processes and regulatory safety requirements and foster a working relationship with facility employees to assist in compliance with requirements
Ensure employees have the skills, knowledge and training to protect against chemical and physical agent exposures (e.g., lead, chromium, heat stress, etc.)
Assist with development of new, and revision of current, safety and health procedures to provide a safe work environment for employees
Assist the safety department in providing a timely response to employee safety suggestions and concerns
Provide guidance in fulfilling the corporate incident investigation process
In conjunction with other safety department personnel, develop training programs specific to areas of the complex and conduct training with area supervision that engages the employees (e.g., hands-on activities, etc.)
Participate in process safety management related to area processes including training, management of change, process hazards analyses, PSSR’s, etc
Participate in Emergency Response Team (ERT) activities and training
Assist in development and implementation of the industrial hygiene exposure monitoring program for the designated area of the complex
Assist with performing industrial hygiene technician activities (sampling, exposure evaluations, etc.)
Assist in development/implementation of facility security procedures
Assist efforts in designated areas to engage employees in understanding environmental limitations and controls in order to sustain environmental compliance
Maintain effective communications and working relationships with employees throughout the plant
Other duties as assigned by the Safety Coordinator
Physical capability, availability, willingness, and ability to work in a team environment
Good interpersonal and influential skills
Work in a safe manner that promotes the health and well-being of the individual and the environment
Strong analytical, troubleshooting and decision making skills
Self-motivated in advancing to the highest level possible
High functioning engineering knowledge and related work experience
Bachelor’s degree in Safety or related field or equivalent work experience required
Solid communication skills including the ability to effectively converse in English, compose written documents and interact effectively with peers and supervisors
Familiar with applicable codes, regulations and standards

Safety Technician Resume Examples & Samples

Requires skills necessary to educate and train employees in general health and safety principles and techniques
Must be a self-starter, work well with others, ability to multi task, attention to detail, and good communication skills
Must have a minimum of 3 years of field experience in industrial safety, health, and or fire protection systems

Safety Technician Resume Examples & Samples

Perform safety audits of clinical, laboratory, and support areas as assigned. Record audit results. Interface with department safety representatives to mitigate findings. Assist in inspectional activities performed by the fire department and other outside agencies
Support all aspects of managing hazardous chemical materials and wastes. Develop and/or maintain competency in all facets of chemical waste management and provide basic oversight and technical support for hazardous chemical waste operations under the supervision of, and assignment by, the EH&S Safety Manager
Perform basic occupational hygiene technical support. Maintain competence in using selected monitoring devices and systems. Perform exposure monitoring for personnel working with hazardous materials and potentially exposed to other non-chemical environmental factors
Assist with indoor air quality investigations. Perform interviews. Conduct air monitoring activities and other technical tasks as necessary. Interface with facilities personnel and contractors as needed for effective follow up. Record and document all pertinent findings
Support emergency preparedness and response capabilities of the department. Respond to chemical spills. Support the EH&S department’s role on the hospital’s chemical HAZMAT Team
Respond to workplace incidents. Investigate, determine and document incident causes and assist with follow up and mitigation of causative issues
Maintain technical competencies based on job function demands. Also maintain knowledge of pertinent policies, procedures, codes and standards and stay current with requirements
Provide written and verbal reports as assigned
Represent the department on various standing and ad-hoc committees as assigned
Assist in managing the personal protective equipment program. Provide information and training to users. Assist in fit-testing respirator wearers
Provide general safety training to employees covering fundamental topics such as fire prevention and response, chemical safety, and personal protective equipment; support department-specific training efforts through “train-the-trainer” activities
Participate in project work as assigned
Bachelor of Science or equivalent degree in the safety field or an associate’s degree in a safety-related field with two years of experience
Basic competency in general chemistry
Strong interpersonal skills and verbal and written communication skills
Capable of performing tasks while wearing a respirator and/or other personal protective equipment
Ability to read sources of chemical hazard information, recognize risks and apply pertinent safety practices
Presentation skills; proficiency in verbal and written English language communication; ability to deliver training presentations to varied audiences of varied sizes
Ability to interact effectively with people individually and in small groups
Must handle conflict tactfully and constructively
Flexibility and teamwork: this department has a broad set of responsibilities requiring all technical staff to multitask and support others
Computer competency with general office software and apps
Physically able to perform tasks such as walking, standing, climbing, lifting, carrying
Must be able to wear a respirator and other personal protective equipment

Herbicides Formulations & Packaging Health & Safety Technician Resume Examples & Samples

Create and present high quality monthly safety meetings
Update, maintain, and rollout new EH&S Safety Standards, tools, and work processes
Help to establish, track and drive improvement in key EH&S performance metrics (training, corrective actions, housekeeping, compliance task completion etc.)
Completion of corrective actions from audits, assessments, and incident investigations
Maintain H&S operating discipline
Actively coach operations in the field on EH&S and lift critical standard execution
Track and communicate EH&S activities and metrics to the department and the site
Complete H&S procedure review in the Management of Change (MOC) tool
Be the focal point for the facility list
Be the focal point for the facility Industrial Hygiene monitoring program
Proficiency in Microsoft applications, such as Word and Excel, and have the ability to learn new systems quickly
Demonstrate leadership skills, inspire others, and lead them through change
A self-starter who can identify, prioritize, and accomplish multiple tasks
Responsive to client's needs through proper planning and prioritization
Must challenge/question work practices in an effort to continuously improve them
The potential candidate must be able to successfully work with a variety of individuals to achieve plant goals and objectives as well as support site processes
Able to follow procedures and processes
Able to follow all safety processes
Must be able to willing and able to work in such environments with frequent bending, reaching, and lifting
Must be willing and able to work in tight or closed-in spaces
Must be willing and able to climb stairs/ladders and work high off the ground
Must be willing and able to work overtime as required
2-4 years of experience in a chemical manufacturing process
Strong proficiency working with EH&S standards and work processes

Safety Technician Resume Examples & Samples

Ensure Compliance with all federal, state and Jacobs Health Safety Environmental Program policies and procedures
Coordinate safety meetings small and large groups
Conduct and document safety inspections, citing dangerous areas/procedures and recommending corrective measures
Evaluate workplace hazards and suggest mitigating measures to reduce risk
Inspect work areas and equipment to ensure compliance with company, state, and federal safety policies and regulations
Maintain safety equipment supply and availability to include equipment inspections
Educate employer and employees about workplace safety
Demonstrate the correct use of safety equipment
Investigate incidents and injuries of identify cause and recommend prevention methods to prevent reoccurrence
This position will report to the Safety Manager
Understanding of Safety Practices basics and application of safety Policies/Procedures for field activities
Knowledge and ability to understand and interpret OSHA standards
Proficient in Microsoft Office applications such as Word, Excel, Power Point and Outlook
Demonstrate the ability to positively interact with employees and management on safety matters. Ability to effectively communicate with other, both oral and written
Board Certified Safety Professional (BCSP) certifications (STS, OHST/CHST, ASP CSP)
Experience working in an industrial/field environment with strong safety presence
Intermediate knowledge of occupational safety and the ability to apply this knowledge
Incumbent must be able to wear standard industrial respirators and/or M-40 Mask for protection from industrial chemicals for extended periods of time

Safety Technician Resume Examples & Samples

Provide technical EHS support and direction for continuing operations, the evaluation of new equipment and processes, contractor services, etc. Conduct inspections and audits to ensure compliance with regulatory requirements and company EHS policies and procedures. Take appropriate action when deficiencies are found and track corrective actions to completion. Identify opportunities and implement actions to reduce risk and drive to zero incidents. Assist with worker's compensation administration and the return to work program. Support quality with vendor/material issues
Plan, conduct/oversee and manage EHS training programs for employees at all levels. Develop site specific training materials as needed
Lead and/or assist in incident investigations (e.g. injury, property damage, near miss) to ensure root causes are identified and effective corrective actions are identified. Ensure high quality investigation reports are prepared, that report outs occur and notifications are made per regulatory and company requirements. Follow up on the completion of corrective actions
Associates Degree with a minimum of two years of related experience or four years of related work experience

Quality Food Safety Technician Resume Examples & Samples

At least 2 years experience in food manufacturing
Strong analytical, organizational and time management skills
Self-motivated, flexible and able to prioritize and respond to changing needs of the business
HACCP training and experience is a plus
Strong computer skills, including Microsoft Office and Excel
Ability to accept supervisory coaching related to performance, work habits and attitude
Ability to function as a team member and get along with others

Safety Technician Resume Examples & Samples

General Duties and Responsibilities
Supervisory Functions
Attitude
Arriving at work on time
Attendance
Overall quality of work
Timeliness of work performed, including meeting production schedules and goals
Adherence to all company policies and procedures

Safety Technician Resume Examples & Samples

Assist clients at the facility level with implementation of those initiatives and programs
Work closely with TRC Account Leads and Client Service Managers to identify and develop new opportunities to expand client relationships, provide value and generate repeat business
Sale, service, and maintain respiratory protection equipment including SCBA’s, Air Trailers, and work units
Provide Fire extinguisher sales and service to existing and new customers
Candidates will have broad technical capabilities and a solid regulatory background with a focus in the following service areas
OSHA Compliance Auditing (1910 and 1926)
Industrial Hygiene/Indoor Air Quality/Industrial Ventilation
Safety Training
Job Hazard Assessments (JHAs)
Contractor Safety Management

Safety Technician Resume Examples & Samples

Completed Associates Degree preferably in occupational health/safety, environmental health, engineering or the physical sciences is REQUIRED
Minimum of 1 year current experience in Environmental Health & Safety is REQUIRED, with 1 year current manufacturing experience a plus
Bachelor’s Degree is highly desired with 3 to 5 years’ experience in Environmental Health & Safety or relevant experience a plus
Ability to proactively identify, analyze workplace hazards and take the appropriate actions to manage risks to an acceptable level work under limited supervision
Must be able to build effective workplace relationships, motivating employees, and supporting employee development in a productive manner
Should be able to communicate well with, mentor and influence all levels of the organization
Must have intermediate level skills with Microsoft desktop applications including Word, Excel, PowerPoint, and Outlook. Experience with SharePoint a plus
Fluent in English is a must – speaking, reading and writing
Strong oral and written communication skills are needed
Must be adaptable and flexible and able to work in a team environment

Safety Technician Resume Examples & Samples

Correcting all unsafe acts or conditions observed
Compliance with applicable company and client procedures
Compliance with OSHA regulations
Proving new hire orientation as required
Issuing and inspecting fall protection equipment
Spending 80 - 90% of time in field conducting safety audits
Discuss field audit findings with employees
Completing audit inspection forms and reporting weekly audit information
Accompany injured personnel to proper medical facility
High School Diploma or equivalent, with a minimum of (2) years of experience as a practicing safety and health professional in the manufacturing, petrochemical, or refinery industry required
2 year degree or certificate in process or occupational safety preferred
Able to climb ladders/platforms to heights of 225 feet, in increments of up to 40 feet at one time. Any fear of heights (acrophobia) should be identified
Able to lift, carry, push, pull, or otherwise move objects weighing up to 40 pounds
Safety personnel are required to work in both environmental conditions, inside and outside. Personnel may be subject to extreme cold (temperatures below 32 degrees Fahrenheit for periods of more than (1) hour) or to extreme heat (temperatures above 100 degrees Fahrenheit for periods of more than (1) hour)
Shall possess fundamental written and verbal communication skills
Shall be fluent (written and verbal) in the English language
Computer skills, especially familiarity with MS Office applications, are necessary
Must be able to meet substance abuse and background requirements

Safety Technician Resume Examples & Samples

Experience in safety engineering, health physics, industrial hygiene, or environmental compliance activities
Demonstrated skills in verbal and written communication
Basic knowledge of software applications creating spreadsheets with mathematical functions, and enhancing presentation reports
CPR Training
Knowledge and understanding or MSDS sheets

Road Safety Technician Resume Examples & Samples

Support the delivery of safety studies, designs, safety advice and road safety audits to the technical teams to deliver the outcomes agreed by the network board to the programmes and budgets agreed with the delivery teams
Maintain the accident database and ensure it is up to date
Maintain the audit findings database and ensure it is up to date
Analysis of collision and other related transportation data to identify trends and issues
Detailed knowledge of Road Safety Audit, Accident Investigation and Roads Safety Engineering principles
A working knowledge or experience in application of design codes (DMRB / MCDHW etc)
Strong communications skills to be able to unambiguously communicate targets, and priorities
Experience in the identification and design of highways schemes
Experience of developing relationships and engendering trust at all levels of the organisation and with clients

Construction Site Safety Technician Resume Examples & Samples

Technical expertise in safety, to include regulatory requirements
OSHA recording keeping
Understands safety compliance auditing processes, and the ability to complete internal audits
Ability to effectively deliver training
Ability to implement safety processes
Proactive and assertive with a high sense of urgency
Ability to plan, prioritize and meet deadlines under high pressure
Willingness to work "off shift" hours as needed
Ability to work within all levels of the organization
Maintain compliance with regulatory/corporate guidelines
Record keeping and reporting safety statistics and trend analysis
Provide safety coaching and recognition
Coordinate and participate in all incident investigations and follows up to ensure that all corrective actions are completed
Schedule and provide all required safety training
Work with operations to proactively raise safety awareness to the next level
Evaluate Behavior Based/Observation Safety Programs
Working with employees to develop Job Safety Analysis (JSA)
Meet monthly with client H&S for safety performance review
Technical training and industrial related safety experience - (A.A.S, B.S. or certifications - COSS, COSM, ASP, CSP)
Minimum 4 years experience in a safety and health role on the job
Prior chemical plant experience
Must have prior safety management experience
Post-offer drug/alcohol screen and physical evaluation

Field Safety Technician Resume Examples & Samples

Conduct safety inspections/assessments at facilities and job sites
May provide training an SA-38 health and safety program compliance activities
Investigate accidents, near misses, and potential hazardous conditions, and recommend corrective/preventive actions and assess their implementation
Administer and assure effective administration of Safety Programs for Alyeska on the TAPS-wide basis and provide on-site safety support to field locations. Additionally, position will participate in and support risk mitigation measures and help assure that field application of these measure is consistent
Maintain documentation subject to internal or external audits or reviews
Work in adverse weather conditions ambient temps to -50F wind chills to -90F
Provide safety related input prior to work beginning’ i.e. development and review of procedures, review of engineering packages, or review of various safety plans
Support, mentor, and guide the use of behavior based safety (LPS) Loss Prevention Systems using IMPACT
Support Project Execution Planning by providing input and participating in project reviews
Participate in relevant Project Meeting, Kickoff, Constructability Review, and Status Review
Participate in Contractor Safety Meeting
Provide relevant input to performance issues and proposed resolutions
Act as part of the Project Leadership team in the field
Establish and maintain positive relationships with employees and contractors to create a safe and healthy work environment
Determines corrective or preventative measures where indicated, and follows up to ensure measures have been implantation
Establish and maintain positive relations
Adheres to all Alyeska pipeline and Chugach Alaska Services policies, regulations, procedures, and code of conduct
Acts decisively during response and demonstrate professional behavior with the highest ethical, moral and legal principles
Works independently and in a team environment with other departments. ‘

Ad Hoc Offshore Safety Technician / Deck Crew Resume Examples & Samples

BA Service and Maintenance and Air purity
HERTM
Dangerous Goods Air Awareness
Mandatory offshore certs (BOSIET, MIST, Medical, CA-EBS and Shoulders Measured

Safety Technician Resume Examples & Samples

Guide and coordinate the work safety system, investigating risks and causes of accidents, always analyzing the applicability of prevention policies
Ensure that all employees and contractors follow the safety legislation and regulations
Work with all departments of the company to implement and sustain Global Star Safety Framework (GSSF) policies as well as internal policies within the organization
Security Technician Course
Experience in metallurgical industry
Knowledge about the environmental laws and regulations

Safety Technician / EMT Resume Examples & Samples

Fully participate as a member of the EHS Team, including support of fellow team members, the team charter and team mission statement
Be an example of safety to all personnel on site adhering to the TOGSEE program
Administer training as required, including: orientations, HazMat / HazCom, permit training, etc
Administer Respiratory Fit Testing program
Conduct IH and noise monitoring
Maintain safety equipment and facilities including: LEL meters, VOC meters
Fulfill OSHA, site, and corporate requirements for auditing safety programs and performing safety inspections
Implement and follow SI Group's ISO Quality programs, policies and procedures outlined by the Standard and support the department to meet the requirements of ISO Quality programs, policies and procedures, and ensure continued compliance through support of the internal audit process and team meetings
High School Diploma or GED, Some College or degree preferred
Minimum three years experience in a manufacturing environmental, health and safety related function
Training and experience in safety permitting, IH monitoring, spill response
MS Office - Basic
Work with the Manager of EHS and other department managers to ensure that all plant activities are in compliance with safety, health and environmental rules and regulations
Help the EHS Team maintain a service organization reputation throughout the plant site
Pass medical physical exam by company doctors and remain capable in accordance with the prescribed "Fit for Duty" job analysis
Provide plant support as needed on a 24 hr/ 7 day basis

Safety Technician Resume Examples & Samples

Complete campus wide life safety inspections
Must be able to use a computer and or tablet
Read and follow building blue prints
Good time management and scheduling
Work with barcoding systems and decode barcode names and locations
Knowledge of excel
Able to adapt to different building management and mapping software
Must have enthusiasm for the job, a customer service approach and be willing to work in a team environment
Hold a valid NYS driver’s license with a driving record acceptable to meet the University insurance standards
Proficient mathematical skills
Possess general knowledge of the campus layout and building locations
Demonstrated ability to establish and maintain effective working relationships with diverse constituencies
Strong organizational skills are required
Ability to gain general knowledge of the campus
Must be able to function under stressful conditions and/or high volume with short turnaround
One to two years’ experience in a Fire and/or Life Safety field
Experience related to any of the essential skills necessary to perform this job

Radiation Safety Technician Resume Examples & Samples

Receive and process in-coming packages containing radioactive material (survey package internally and externally, document results, create receipt and transport manifest) and then deliver by vehicle to end users around campus. This requires very specific processes that must be followed and completed within strict time limits. Training by the US Dept. of Transportation is mandatory and recompleted every two years. Exposure to ionizing radiation can occur. Track all RAM user inventories monthly and follow up with users for data verification and subsequent individual RAM use and bioassay (urine) testing. Receive RAM waste pickup requests from users on campus, coordinate and collect the waste, transport to OU rad. waste storage facility, catalog the various radioactive waste products, place in numbered storage barrels and keep detailed records on the variety of radioactive waste streams that must be monitored monthly and eventually surveyed and disposed of as either non-radioactive or coordinated with a waste broker for subsequent disposal (removal) from Ohio University as a regulated radioactive waste. The collection and transport of radioactive waste requires a valid driver’s license with CDL certification. Generate annual radioactive waste (storage and/or disposal) report to ODH
Collect, calibrate, make minor repairs, if needed, and return RAM user radiation detection instrumentation. Exposure to ionizing radiation during these calibrations often occurs. Coordinate with contractors to accomplish more complex repairs. Communicate with researchers from students, Principle Investigators (PI), department Chairs, to Deans and senior management, for a variety of reasons. Interaction with OU Police Department occurs when dealing with emergency response and security systems and response plan review. Schedule and attend quarterly Radiation Safety Committee meetings to take notes and create minutes for later inspection by regulatory agencies. All records previously noted are completed and maintained with eventual review and sign off by the RSO and then filed for later perusal by regulatory inspectors. The LRS laboratory must be operably maintained – many products are used and need to be inventoried and replaced (ordered through Bobcat Buy, in most cases); kept organized; filing and individual files must be well kept; surveyed; and cleaned
Bachelor’s degree in Sciences (Bio, Chemistry & Phys) or related field
Minimum 3 years work related experience
Valid driver’s license required. CDL certification and Accelerator Operator I certification and various training modules will be required but may be obtained after employment
An equivalent combination of education

Biological Safety Technician Resume Examples & Samples

Audits the status of Approval Holders, rooms, and laboratories for compliance with biological safety standards and protocols
Makes observations of the status of biological safety compliance systems and documents summary findings
Provides advice, assistance and monitoring services to lab personnel regarding routine biological safety matters and during contamination clean up
Enters data into automated databases and spreadsheets
Prepares and maintains complete, accurate, timely, concise and legible records of assigned biological safety compliance activities
Participates in disaster emergency preparation drills and emergency responses
Proficiency in using database, word processing and spreadsheet computer software
Demonstrated skill in documentation and report writing
Ability to effectively communicate policies and regulations
Working knowledge of standard safety compliance practices used in biological laboratories and research, biological safety cabinets, autoclaves, and other biological safety laboratory equipment
Skill in compliance review and investigation in a laboratory or research setting

Field Safety Technician Resume Examples & Samples

Calibration on portable and fixed gas detection equipment, air sampling equipment, sound level equipment and flow tests on respiratory equipment at customer locations
Perform calibrations, repairs, rebuilds and general maintenance on customer equipment
Oil field and Safety work experience preferred
Must be willing to learn and demonstrate proficiency in gas detection and respiratory systems
Acceptable driving record according to company guidelines and demonstrate trailer towing and backing skills
Must be willing to spend nights away from home as required by market conditions

Safety Technician Resume Examples & Samples

Active pursuit of occupational health and safety certificate (CRSP, OHS certificate, NEBOSH, NCSO or other applicable)
Appropriate experience in industrial or mining environments (5 years minimum)
Experience in the following focus areas is preferred

Safety Technician Resume Examples & Samples

Allocate approximately 90% of his/her time performing observations/safety audits and permit writing in the field
Perform periodic audits of Critical Behaviors (Behavior Based Observations), Operating Disciplines (OD Audits), Safe Work Permits, Lock Out Tag Out, and Safety Task Analysis Cards and other tasks required by the scope of the assignment
Perform periodic audits of work activities to verify work is being performed safely and within the scope of applicable SWP, LOTO, STAC, etc. documents
Perform daily housekeeping audits for identification/correction of hazards
Coordinate with EH&S representatives to complete any required tasks in a timely manner
Immediately communicate any significant EH&S issues to the responsible Client representative and to Total Safety Management as required
Provide support to shift /field supervisors on all safety related issues
Coach Operation/ Contractor personnel on hazard awareness/recognition
Attend / conduct regularly scheduled EH&S Team meetings and safety meetings e.g. net meetings, tailgate meetings, shift change meetings
Utilize Safety Technician “Activity Log” to document daily safety activities. Submit completed activity log electronically to the Total Safety Manager upon completion of project or as required

Therapeutic Safety Technician Resume Examples & Samples

Performs the duties and responsibilities of a wide range of patient safety assignments throughout the hospital as assigned
Actively engages with patients in monitoring the environment and well-being of all
Attends and contributes to therapeutic reviews by providing input into the goals and objectives developed with the patient
Works with the treatment team to institute individual crisis intervention plans and patient safety plans
Acts as observer of patients and provides de-escalation and redirection as needed
Works in a trauma informed model in which the patient is verbally guided and kept apprised of changes to routine, environment, etc
Provides supportive oversight of patients during off-site activities including medical visits, court trips, and external consults
Monitors and tracks environmental concerns through inspection of equipment, systems and physical structures to ensure a safe environment for all patients
Follows policies and procedures
Provides emergency responses, along with clinical and medical members of the treatment team, to address patient safety, which may include calming patients' disruptive and/or violent behaviors or threats of self-harm
Employs use of verbal de-escalation techniques to modify or control patients' disruptive behaviors rather than physical force whenever possible

Safety Technician Resume Examples & Samples

1-5 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Must be willing to work a rotating shift of days, nights and weekends. Must be willing to be on call 24/7. Works under immediate supervision. Reports to a EHS Supervisor
Communication is a must
JSA (Job Safety Analysis) Knowledge
Power Point, Word, Excel. Computer Skills, IPhone, IPad
Basic First-Aid, CPR, AED a plus
Dupont S.T.O.P Program a Plus
1-4 Years of Safety Experience, manufacturing environment preferred
Minimum OSHA 10 In General Industry
Minimum OSHA 10 in Construction
OSHA 30 a plus
English as a primary language
Secondary Languages such as Japanese and Spanish a plus, but not necessary

Site Safety Technician Resume Examples & Samples

Conduct regular workplace H&S audits to evaluate cultural development
Conduct incident investigations as required
Complete and submit various reports and updates as necesary
Make reccomendations to Division H&S Manager to correct cultural deficiencies
Thinking skills – decision-making ability, long-term vision, seasoned judgment
Skills in supervision, planning, and coordination
Ability to drive change while maintaining operational effectiveness
Personal depth, in the form of mature confidence, adaptability, self-direction, and organization
Ability to inspire trust and integrity
Skilled in managing diversity
2 years experience in industrial/environmental service industry

Safety Technician Resume Examples & Samples

Minimum of 5 years of experience as safety field inspector in industrial environment
First Aid, CPR and OSHA training required
Bachelor’s Degree in HSE or related field preferred
Proficient in Microsoft Office Programs preferred

Occupational Health & Safety Technician Resume Examples & Samples

Sample collection in the field, data interpretation and preparation of reports
Interpret and/or analyze sample/data results in relation to legislative requirements and industry-accepted guidelines and criteria
Supervising asbestos abatement activities
Identifying site issues or project concerns and recommending corrective actions
Basic client liaison to ensure health, safety and hygiene needs are addressed and met
Participate in the Health and Safety program
Participate in the Quality Control program
Strong interpersonal, verbal and written communication and critical thinking skills
Possess a reliable vehicle, with appropriate registration and insurance for use as a work vehicle
Requirement to wear personal protective equipment – including but not limited to respiratory protection, hard hat and safety glasses
Flexibility in meeting client schedules – evening and weekend work is required
Willingness to travel throughout Alberta and potentially other provinces
Adesire to broaden range of professional skills
Able to adapt quickly, while managing a busy workload
Have proven problem-solving skills
Very good computer skills in Microsoft Office Software applications (Word, Excel, Outlook)
Enthusiastic and versatile, willing to take on responsibility
Strong people skills and an ability to work in a team environment

Safety Technician Resume Examples & Samples

Maintains storage areas, equipment, and personal protective equipment related to hazardous materials
Identifies potential safety hazards, documents identified conditions, and takes action to correct identified deficiencies
Individual may be on-call for emergency situations that require the individual to respond at times outside of their set work schedule

Radiation Safety Technician Resume Examples & Samples

Conduct worksite risk assessments, evaluations, inspections, audits, investigations, or surveillance surveys for compliance programs. May help with creating or preparing checklists for the compliance inspections. Help with identifying potential risks and with recommending appropriate solutions
Perform data entry into EH&S databases. Assist with reviewing and analyzing data for trends, deficiencies, quality control, and with seeking solutions to correct identified issues
Help maintain records and documentation, including training records, waste manifests, SDS, safety equipment certifications, and other regulatory compliance documents
Help with providing training and technical guidance or advice, to personnel, faculty and students on various EH&S compliance programs
Assist with responding to urgent and emergency calls, questions and requests, following all regulations and procedures
Participate in the EH&S’ Emergency Response Team
Maintain, test and calibrate equipment, inventory, and supplies used for compliance management, may include performing chemical fume hood testing, emergency shower and eye wash testing, and performing respiratory fit testing
Write technical safety reports, assessment reports, hazard surveillance reports, lab inspection reports, and incident review reports
Assist with reviewing and updating of policies, procedures, and safety manuals
Interact with members of the Hospital and School community
Bachelor’s degree in Safety, Environmental Science, Natural Sciences, Fire Safety, Chemistry, Biology, Environmental Health and Safety, Emergency Management, Radiation Safety, Health Physics, or a related degree dependent upon discipline applying for
Basic knowledge of federal and state regulations pertaining to selected disciplines within Env. Health & Safety, such as; EPA, DOT, OSHA, NIH, CDC, NIOSH, MADPH, MADEP, MADPH, NRC, NFPA, FEMA, MEMA
Some skill with Microsoft Office software and database applications
Must have a valid driver’s license, and the ability to travel to off-site locations and respond to matters of urgency, sometimes after normal working hours
To be able to become certified as OSHA 40 hour Emergency Responder is required
Ability to satisfactorily manage and report status of assignments, tasks, responsibilities, and multiple elements of complex programs

Radiation Safety Technician, Senior Resume Examples & Samples

Performs routine contamination surveys, audits, bioassays and leak testing in laboratories utilizing radioactive materials
Reports contamination survey, audits and leak test results to researchers and the Radiation Safety Officer (RSO)
Calibrates portable survey instruments used for radioactive contamination monitoring in laboratories
Performs other technical compliance duties as necessitated by regulation and to provide a safe working environment for Center staff
Emergency response to haz mat spills
Other duties as assigned by RSO

Safety Technician Resume Examples & Samples

Assists management with administrative tasks such as tracking and compiling information of interest
Conducts safety and environmental audits in plant/outside
Creates procedures and job aids
Document management
Assist with DEP and EPA compliance activities
Assist with OSHA compliance activities
Assist with incident investigation and corrective actions
Tracks corrective actions
Organizes and maintains file system, and appropriately files correspondence and other records
Performs data entry with understanding of confidential information
Prepares various reports detailing the administrative information handled by the position
Assists staff with special projects as needed
Reads and answers correspondence
High School Diploma or equivalent and 1 year of Safety experience or Bachelor’s Degree in Safety or related field; or an equivalent combination of education and experience sufficient to successfully perform the key accountabilities of the job required
1+ years of previous administrative experience preferred
Ability to travel and work overtime as necessary
Solid understanding and application of mathematical concepts
Ability to develop and maintain collaborative relationships with peers and colleagues across the organization, as well as, internal and external clients
Ability to work well autonomously and within a team in a fast-paced and deadline-oriented environment
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
Ability to read, write, and comprehend simple instructions, short correspondence, and memos

Download Safety Technician Resume Sample as Image file

Related Job Titles

Public Safety Dispatcher Resume Sample

Product Safety Resume Sample

Active Safety Resume Sample

Patient Safety Resume Sample

Trust & Safety Resume Sample

Food Safety Resume Sample

Safety Leader Resume Sample

Safety Representative Resume Sample

Safety Assistant Resume Sample

Safety Administrator Resume Sample

Specialist Safety Resume Sample

Lead Safety Resume Sample

Browse More

Safety Technician Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Safety Technician resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Safety Technician Resume Examples & Samples

Principal Quality & Food Safety Technician Resume Examples & Samples

Radiological Safety Technician Resume Examples & Samples

Radiation Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Hazmat / Safety Technician Resume Examples & Samples

Life Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Lead Life Safety Technician Resume Examples & Samples

Enviromental Health & Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Field Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Quality Food Safety Technician Resume Examples & Samples

Health & Safety Technician Resume Examples & Samples

Quality & Food Safety Technician Resume Examples & Samples

Safety Technician PNW Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Industrial Hygiene / Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Health & Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Journey Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Journey Resume Examples & Samples

Safety Technician Resume Examples & Samples

Ehss Safety Technician, Gigafactory Resume Examples & Samples

Food Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Lab / Quality Food Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Health & Safety Technician Resume Examples & Samples

Safety Technician Intern Resume Examples & Samples

Field Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Material Safety Technician Resume Examples & Samples

Sulfonamides Health & Safety Technician Resume Examples & Samples

Health & Safety Technician Resume Examples & Samples

Temporary Safety Technician Resume Examples & Samples

Seeds´ Work Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

Health & Safety Technician Resume Examples & Samples

Safety Technician Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume