Representative, Field Service Resume Samples

4.5 (70 votes) for Representative, Field Service Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the representative, field service job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
FW
F Wehner
Fred
Wehner
9950 Alayna Throughway
New York
NY
+1 (555) 468 8160
9950 Alayna Throughway
New York
NY
Phone
p +1 (555) 468 8160
Experience Experience
New York, NY
Commissioning Field Service Representative
New York, NY
Huel LLC
New York, NY
Commissioning Field Service Representative
  • Setup PLC equipment. Establish communication with the PLC. Work with the customer to complete electrical (I/O) checks
  • Assist client in sanitizing and/or process start up
  • Assist client with initial operation of the plant
  • Assist client with installing membranes and filter media
  • Verify installation is as per GE’s drawings
  • Commission equipment: this includes valves, air compressors, ejectors, process pumps, blowers, and instrumentation
  • Valid driver's license
Phoenix, AZ
Field Service Representative Rhode Island
Phoenix, AZ
Franecki, Shields and Feest
Phoenix, AZ
Field Service Representative Rhode Island
  • Responsible for prioritizing, scheduling, and completing all work following established policy and guidelines in an assigned territory
  • Work from home office
  • Educates and coaches Panel members on operation and usage of Nielsen equipment to ensure optimum performance results
  • 5 week paid training program (3 weeks of training to be held near Tampa, Florida) - flight, temporary lodging and transportation while training provided
  • Establish and maintain long term relationships from randomly selected Panel Members
  • Maintains company assets following Field policy including in-home networking software and equipment, company car, laptop, and company expense account
  • Compensation package with a base salary of $36,400, plus quarterly incentives/bonuses based on performance and paid overtime
present
Chicago, IL
Field Service Representative / Technician
Chicago, IL
Greenholt-Waelchi
present
Chicago, IL
Field Service Representative / Technician
present
  • Provides on-site technical assistance to help troubleshoot and repair equipment
  • Provides a communication link between the customer and the company to help ensure that effective service is provided to the customer
  • Maintains records of performance reports
  • Performs Preventative Maintenance inspections of customers batteries, chargers, battery handling equipment, and battery changing/charging area and records data
  • Interacts with all levels of people, both inside and outside the company
  • Waters, Washes, cleans, and neutralizes customer’s batteries at customer‘s location
  • Determines specific gravity of solution
Education Education
Bachelor’s Degree in Aviation
Bachelor’s Degree in Aviation
Tulane University
Bachelor’s Degree in Aviation
Skills Skills
  • Basic knowledge of Microsoft Office and the Internet
  • Able to perform basic math such as add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals
  • Basic mechanical aptitude
  • Able to operate a cell phone
  • Able to read with comprehension and write documents (such as customer correspondences, memos and reports) in English
  • Able to solve simple equations
  • Previous experience working with hand and power tools
  • Previous customer service experience in field support
Create a Resume in Minutes

15 Representative, Field Service resume templates

1

Senior Field Service Roving Representative Resume Examples & Samples

  • Interfacing with the customer at all levels on any emerging technical issues
  • Possession of detailed knowledge and understanding of P&W products and services
  • Ability to operate in a cross functional environment and record of success therein
  • Fluency in English. Second/third languages are a plus
  • Sensitivity and awareness of nuances of working together in multicultural environments
  • Prior customer facing and field support experience
2

Principle Field Service Representative Resume Examples & Samples

  • Production support of Aerosonde SUAS
  • Perform as engine mechanic, composite technician, and/or maintainer / crew chief
  • Travel and deploy worldwide as required
  • Direct interface with management and customers
  • Work in groups or independently with minimal or no supervision
  • May be required to work odd shifts, weekends, and/or extended hours
  • Responsible for data management and generation
  • Provides general logistics functions
  • Troubleshoot technical problems and issues and determines technical solutions
  • High School diploma/equivalent and six or more years of related experience. Related technical training is desired
  • Minimum requirement is that the candidate holds an Aerosonde Maintainer Qualification
  • Knowledge of AS 9100 quality principles required
  • Basic computer skills are required, computer networking experience is desired
  • Must communicate effectively with internal and external customers both verbally and in writing, and possess strong leadership skills
  • Experience in troubleshooting and repair of Unmanned Air Vehicle systems required
  • Prior military service a desired plus
  • Must be deployable to various OCONUS locations
  • Must be a U.S. citizen with the ability to obtain/maintain a government security clearance
3

Field Service Representative, Kc-hawaii Resume Examples & Samples

  • Assist and support Contract Field Team(s) (CFT)
  • Provide instruction on the use of special tools, support equipment and test equipment
  • As a minimum, accomplish organizational level on-site, off-equipment repair of Booms, WARP and test of Inertial Navigation Units (INUs)
  • Participate in Air Force technical publication reviews
  • Travel in support of missions when authorized by the ACO/PCO
  • Provide on-equipment and off-equipment support
4

Representative, Field Service Resume Examples & Samples

  • Influence customers to take action(s) recommended by Bombardier to improve performance /satisfaction with our products
  • Represent Field Services on defined Customer Teams
  • You have experience working with Bombardier Global & Challenger 300/600
  • You are willing to be officed in the Seattle, WA area
  • You are able to travel up to 20%
  • You have strong troubleshooting skills
  • You have a FAA licensed Airframe & Powerplant mechanic - preferred
  • You have interpersonal skills necessary to work effectively with a variety of individuals, departments, organizations, and regulatory agencies
5

Pwr-field Service Representative Resume Examples & Samples

  • Follow blueprints, procedures and instructions utilizing knowledge of specific tools, equipment and components
  • Will be required to work around radioactive and/or corrosive chemicals and to wear appropriate protective equipment
  • Perform basic reactor disassembly and reassembly and fuel handling duties based on level of training acquired in the areas outlines below
  • Comply with all applicable safety and health rules including personal dose compliance
  • Work flexible hours and shifts, as required, to ensure timely service
  • Travel is required to a variety of regional and remote job sites
  • High School Diploma, or equivalent education
  • Basic knowledge of commonly used equipment, practices, procedures and concepts in a particular field
  • Knowledge of company and industry safety and health policies and programs, as required for specific roles
  • Basic written/verbal skills; ability to effectively communicate with staff, management, vendors and customers
  • Ability to comprehend instructions, policies, procedures and guidelines required to perform assigned tasks
  • Able to lift up to 35 pounds, bend, stoop, and remain standing for extended periods of time
  • Ability to work in high heat environments and at heights
  • Specific training in the following areas: KNOTS, MEASUREMENT & TESTING EQUIPMENT, RIGGING, FOREIGN MATERIAL EXCLUSION, HUMAN PERFORMANCE, RAD WORKER PRACTICES, FLANGES, PACKOUT, PWR BASICS
  • Current PWR Refueling Qualifications
  • Minimum of 3 Refueling Outages
6

Field Service Representative Almaty Resume Examples & Samples

  • Assume the role of the Bombardier Business Aircraft ambassador & focal in all facets of the aircraft operation with the Customer. Take on ownership of issues or potential issues and ensure the resolution reached is to the satisfaction of the customer
  • Interact with, and provide support to all levels of the Customers organization and preferred service facility, including but not limited to Owners, CEO/COO’s, VPs, Directors, Aviation advisors, Crew, PA’s, and various levels of related operational staff
  • Assist customers and Bombardier in the determination and processing of warranty claims on green aircraft, completion and vendor warrantable issues as applicable
  • Provide factual, concise, and value added reports to both the Customer and Bombardier internal departments on an as required basis
  • Set priorities and effectively escalate concerns within the Customers organization and within Bombardier
  • Provide Bombardier Senior Management with timely updates on the Customers key operational and maintenance concerns and issues, as well as potential solutions for same
  • Keep current on all technical aspects of aircraft supported including available modifications, manual revisions, service bulletins, and best operational practices
  • Be available to travel frequently and often at short notice to the countries within the region of responsibility in Kazakhstan, Russia and the Commonwealth of Independent States (CIS), including (but not limited to) Turkmenistan, Uzbekistan, Georgia & Azerbaijan
  • You have a minimum of 7 to 10 years of aviation experience in the maintenance, modification and repair of jet aircraft or 3 years as a FSR covering multiple platforms
  • You have strong interpersonal skills and have the ability to communicate fluently in English and Russian (written and spoken) at all levels, with tact and diplomacy; multi language skills are an asset
  • You are a strong individual contributor, working well in a team-based dynamic and global environment
7

Field Service Representative Eindhoven, NL Resume Examples & Samples

  • Assist MOB personnel during unit Crash Damaged or Disabled Aircraft Recovery (CDDAR) effort to include exercises
  • Assist the Air Force in preparation of material deficiency reports required by T.O. 00-35D-54
  • Provide technical support at the KC-10 Engine Program office on matters concerning the GE CF6-50C2 Engine
  • Be available to assist MOB/FOB personnel during unit Crashed Damaged Destroyed Aircraft Recovery (CDDAR) effort to include exercises
  • Shall comply with the security requirements listed in Industrial Security Manual, DOD Series Regulations, DD Form 254 and the appropriate contract Security Classification Guide
8

Field Service Representative Manager Resume Examples & Samples

  • 3 or more years revelant experience
  • Advanced MS Office skills, especially Excel
  • Excellent client-facing and internal verbal and written communication skills
  • Excellent follow-up and problem-solving skills
  • Excellent organizational skills including attention to detail
  • Ability to follow directions and take initiative when required
  • Travel up to 75%
9

Field Service Representative GE Water Resume Examples & Samples

  • Lead or participate on-site project management, troubleshooting and issue resolution
  • Install and service chemical feed and water treatment equipment at designated locations
  • Consultant with customer management and technical counterparts including communications with other FSRs, Field managers, Environmental Health and Safety, sales, engineering, logistics, outside contractors and plant operators regarding equipment and operations regularly
  • Perform water analysis and collect samples for preparation, labeling and shipment to designated laboratory for analysis
  • Perform daily testing that may include NTU, Hardness, Chlorine, pH, CO2, O2, SDI, TOC, Na, Conductivity, Silica, in addition to various other site-specific testing requirements
  • Ensure compliance of Deliverables, including volume and quality per the customer’s contract specifications
  • High School Diploma / GED / Home School Certification OR international equivalent to High School Diploma with a minimum
  • 2 years of work experience in the water industry or in a related field
  • Or 4 years training (college, military, vocational/technical school)
  • At least 2 years Field Service experience – in Water or related field
  • Familiarity with water treatment processes and applications in the food and beverage industry
  • Strong communication skills (written and oral)
  • Strong analytical skills and Business Acumen
10

Field Service Representative, Houston, Texas Resume Examples & Samples

  • 2-year degree in a technical, electrical or related field or equivalent work experience
  • 3 years field service experience installing and repairing: computer systems and electro-mechanical equipment in a traveling capacity
  • Computer experience utilizing CAD/CAM software and office productivity and database software
  • Experience with hand tools, test equipment such as multi-meter, computers with Stratasys’ application software
  • Self-reliant; strong professional people skills
  • Ability to work well with others
11

Regional Field Service Representative Resume Examples & Samples

  • Monitor tooling calibrations for any equipment used to perform designated tasks
  • Perform any appropriate inspection they are certified to perform following completion of engine repairs and modifications and the inspection of powerplants following their installation into the aircraft for final acceptance and release to service
  • Make airworthiness determinations and providing suitable certification for the work performed including the Final Inspection and “Release to Service” of any work accomplished within the Repair Station's Rating either at the Repair Station or at any other location
  • Establish and maintain positive and effective contact with customers, brokers, agents and others to enhance opportunities for new and continuing business development
  • Accomplish duties in a manner that presents an image of professionalism to the customer and their agents that is the embodiment of service assistance in conforming the results of the repair/maintenance activities to the manufacturer's approved modification specifications in engines and related accessories
  • A&P license required with well-developed technical knowledge of specific types and models of aircraft turbine engines
  • Must be able to speak, read, and write in the English language
  • Must possess effective written and verbal communications skills
  • Must have proper hand tools
  • Should be able to demonstrate PC proficiency in MS Word and Excel as well as learn any corporate or industry software used by the position
12

Field Service Representative, CMS Spain Resume Examples & Samples

  • Act as technical consultant and liaison with customer management and technical counterparts
  • Provide service and support to customer sites within region and nationwide as needed
  • Coordinate functions with Field Services Management
  • Perform water analysis and/or collect samples for preparation, labeling and shipment to designated laboratory for analysis
  • Write on site report based on any work carried out at site
  • Relay customers' feedback to Sales and/or Technical Department
  • Recommend appropriate procedural and/or policy changes that will help overall effectiveness
  • Travel to and remain at all assigned job-sites until assigned tasks are completed
  • Manage all aspects of safety on the job, including the operation and maintenance of an assigned company vehicle if required and all EHS policies
  • Chemical Engineering Degree or similar education
  • Proven experience in the water treatment industry is a must
  • Fluent in Spanish and English is a must. Please note candidates with no fluency in Spanish will not be considered
  • Tasks oriented
  • Availability to travel extensively
  • Valid driver licence for Spain
  • EU Work Permit
13

Chinook Field Service Representative Resume Examples & Samples

  • Must be capable of utilizing expert level technical and company knowledge of CH-47F electrical, avionics and CAAS systems to assist the customer in achieving and sustaining a high level of proficiency in the operation and maintenance of their aircraft. The FSR will provide advice and guidance to field maintainers and leaders in order to attain and sustain maximum operational readiness
  • Will function as the primary technical contact to the customer and must possess the tact, verbal and written communication skills necessary to interface with customer and company organizations
  • Will provide guidance and instruction in the use of maintenance publications, procedures, specialized test equipment and provide technical guidance to resolve difficult and unusual maintenance issues
  • Shall serve as liaison to Chinook Fleet Support for the exchange of information relative to maintenance on the aircraft including notifications of urgent maintenance difficulties and troubleshooting requirements
  • Provides field operation and /or support of delivered equipment
  • Coordinates the development of advanced troubleshooting procedures to isolate equipment problems not detected by tactical diagnostics/documentation
  • Documents field sire activities, reviews field activity reports
  • Provides interpretation of technical documents to customer when required
  • Recognizes customer requirements and develops on-the-job training programs
  • Solves highly complex technical problems; assists and advises others in resolving technical issues
  • May be required to assist in establishing a new field office
  • Guides others and works under minimal direction
  • Background in Avionic/Electrical/CAAS on the CH-47F
  • Valid Certificate of NOS (Italian security clearance) is preferred
  • Prefer minimum of 2 years of hands on CH-47F maintenance or FSR experience with a heavy emphasis on Avionics and Electrical systems. CAAS knowledge and experience with CAAS within the CH-47F platform is required
  • Must be fluent in English
  • Proficiency in Italian is preferred
14

Commissioning Field Service Representative Resume Examples & Samples

  • Safely and successfully commission custom projects and extended scope projects from construction to commissioning, including UF/MBR, RO/ED and other technologies as required, primarily in North America
  • Verify installation is as per GE’s drawings
  • Setup PLC equipment. Establish communication with the PLC. Work with the customer to complete electrical (I/O) checks
  • Commission equipment: this includes valves, air compressors, ejectors, process pumps, blowers, and instrumentation
  • Assist client with installing membranes and filter media
  • Complete detailed controls testing to ensure the system is functioning as per design
  • Assist client in sanitizing and/or process start up
  • Assist client with initial operation of the plant
  • Train client operators on plant operation. Transfer ownership of system to the client
  • Meet with the client and GE to communicate schedule and address issues as necessary
  • Position can be based in Canada or US
  • Bachelor Degree in Engineering or minimum 2 years’ experience with GE Water’s water treatment equipment including UF/MBR and RO/ED products in drinking water, wastewater and industrial treatment plants
  • Familiarity with PLC control systems, PLC programming and troubleshooting
  • Valid passport
  • Ability to travel extensively (~250 days/year) throughout North America, and to other places in the world
  • Valid driver's license
  • Demonstrated ability to work independently and remotely with project teams
  • Strong focus on customer relationships (both external and internal customers). Understands balance between customer and GE teams
  • Strong knowledge of water/wastewater process: Understand disinfection, BOD, coagulation, etc
  • Mechanical experience and know-how (hands on, reading and interpreting drawings, etc), particularly with water treatment equipment (pumps, valves)
  • Electrical experience and know-how (hands on, reading and interpreting drawings, etc), particularly with electrical panels and water treatment equipment
  • Familiarity with setup of instrumentation used in water treatment processes
  • Ability to plan multiple priorities, and focus on the most important ones
  • Ability to adapt quickly to new problems, clients, and situations
  • Ability to make timely and correct decisions without all the information
15

Mobile Field Service Representative Resume Examples & Samples

  • Provide guidance to our customer and facilitate the integration of Bombardier Commercial aircraft into the customer's operation in a safe, efficient and economic manner
  • Provide information and informal training on technical, operational, and logistical matters related to the aircraft's operation and maintenance to the customer
  • Influence customer to take action(s) recommended by Bombardier to improve performance /satisfaction with our products
  • Provide reports in accordance with established requirements and schedule
  • Be required to lead and/or support Commercial Aircraft field parties or start up teams as they carry out modification retrofits, product improvement installations, and damage repairs at the customers' facility
  • Build effective working partnerships across functional departments and key influencers within Bombardier to enhance the customer experience
  • Applicants will be required primarily to support the C series program. However, as needed maybe required to support other platforms as well (CRJ and Q series)
  • Be required to travel worldwide and in certain cases on short notice
16

Representative, Field Service Resume Examples & Samples

  • You have Bombardier Business Aircraft experience with Learjet, Challenger &/or Global
  • You have on-call availability
  • You currently live in Pennsylvania or are open to relocate to this area
17

Flex Services Field Service Representative Resume Examples & Samples

  • Providing evaluation of production requirements of the customer responsible for the installation of new production engines
  • Establishing liaison with relevant sections of the customer’s organization, Rolls-Royce Customer Support, Engineering, Program Management, and Operations Center
  • Providing assistance on technical issues in the form of written, phone calls, electronic media relating to aircraft engine operations and new aircraft production flight preparation
  • Supporting flight operations at OEM facilities Document and submit Field Service Reports into ETS (if applicable)
  • Be the RRC onsite point of contact on logistical and quality matters
  • Loading all Engine information into ETS for all aircraft deliveries (if applicable)
  • Providing technical assistance to Rolls-Royce Engineering for the review, fitment, and installation checks for service bulletins, quality issue resolutions, and product
  • Improvements
  • Establishing and maintain working relationships with Deployed Services Field Service Representatives, Leads, and Managers
  • Providing support for field activities such as service bulletin campaigns, and customer requests
  • Participating and provide support during conferences and program reviews
  • Role requires employee to deploy to Baghdad International Airport in support of the Iraqi Air Force C130J’s/AE2100D3’s as part of a US Foreign Military Sale (FMS) contract. Rotations into Iraq are expected to last a minimum of 3 months at a time
18

Field Service Representative / Technician Resume Examples & Samples

  • Travel to customer sites to install, repair, and perform preventative maintenance to customer’s equipment to include flooded and sealed batteries, chargers and DC power distribution equipment (cable trays, battery racks and power cables)
  • Replaces defective parts, reassembles battery, and fuses lead parts with gas torch
  • Determines specific gravity of solution
  • Waters, Washes, cleans, and neutralizes customer’s batteries at customer‘s location
  • Installs equipment at customer's facility to ensure full functionality according to specifications
  • Maintains records of performance reports
  • Occassionally download battery and charger data via a monitoring device and use the information to repair or correct battery/charger problems in accordinace with the customer’s operation
  • Basic knowledge of Microsoft Office and the Internet
  • Basic mechanical aptitude
  • Previous customer service experience in field support
  • A basic electrical understanding
  • The use of test equipment and reading schematics
19

AE Field Service Representative Resume Examples & Samples

  • Representing Senior Field Service Representative where knowledge and experience apply, will check more complex decision making with management team
  • Providing assistance on technical issues to include: written communication, telecommunication, and electronic media relating to aircraft engine operations, maintenance, repairs, troubleshooting and logistics support
  • Assist in reviewing engineering changes with regard to their effect on the product in the field. This is to include maintenance manual updates and communicating with the Customers on how this will impact their operations
  • Travel on short notice domestically or internationally in support of campaigns, AOG situations, and/or Customer requests for extended periods of one month or more
  • Providing technical support during conferences and program reviews, etc. at the request of Rolls-Royce and/or the Customer
  • Contributing to the completion of specific program requirements such as site visits, engine operations, maintenance, safety briefs, field training, accident investigations, in-flight test evaluations and direct requests on short notice
20

Field Service Representative, Team Lead Resume Examples & Samples

  • Provide field service engineering, technical assistance, scheduling and sales support direction to FSR’s and customers in areas of installation, testing, startup, maintenance, repair, training and modification of electrical power distribution equipment
  • Self-manage assigned projects for electrical equipment
  • Demonstrate knowledge of electrical test and diagnostic equipment
  • Provide technical training
  • Strong analytical aptitude and complex problem solving skills
  • Demonstrated ability to provide leadership to Field Service Representatives (FSRs): support sales, profit and growth goals while continually improving quality and customer levels
  • Demonstrated ability to provide service and represent company interests in developing customer relationships to assure long-term customer satisfaction
  • Prior financial management experience would be an asset
  • Demonstrated proficiency in the following: Basic, Intermediate and Advanced Test Equipment Operation; Basic, Intermediate and Advanced Trouble-shooting Techniques; Basic Protective Relays and Basic Power Quality (PQ) Measurements
  • Red Seal Interprovincial Journeyman Electrician and/or post-secondary degree/diploma in Engineering or related field from an accredited institution
  • Minimum five (5) years’ experience evaluating and servicing electrical distribution or control systems
  • No relocation provided – candidate must reside within 80km of the Delta, BC site
  • Legally authorized to work in Canada without company sponsorship
  • FSRA certification
  • Post-secondary degree/diploma in Electrical Engineering or Electrical Engineering Technology from an accredited institution
  • Minimum seven (7) years’ experience evaluating and servicing electrical distribution or control systems
  • Experience in directing and supervising a technical field service team
21

Field Service Representative, Southeast Resume Examples & Samples

  • Provide best-in-class merchandising support at designated accounts across Department, Independent and Outdoor channels
  • Effectively communicate brand and technology information to retail associates and consumers
  • Responsible for developing an efficient and effective event schedule to drive sell-thru and brand awareness
  • Maintain strong communication with Sales, Marketing and Merchandising teams
  • Provide up to date reporting on Timberland performance, competition and opportunities throughout your territory
  • Maintain an efficient and sensible travel schedule
22

Field Service Representative Rhode Island Resume Examples & Samples

  • Ensure collection and transmission equipment is properly installed and configured in Nielsen Panels to transmit necessary audience data
  • Maintains company assets following Field policy including in-home networking software and equipment, company car, laptop, and company expense account
  • Educates and coaches Panel members on operation and usage of Nielsen equipment to ensure optimum performance results
  • Must use negotiation skills to work with phone, voice, data, and content providers
  • Fluent in both Spanish and English languages
23

DHS Field Service Representative Resume Examples & Samples

  • Manages product mix of franchise vs. non-franchise to designated level
  • Performs functional brace measuring and fitting as prescribed by the physician’s of the clinic. Ensures proper completion of DJO measuring forms and Insurance Billing Information forms for functional brace fitting. Coordinates with patients for follow-up fitting appointments as necessary
  • Travel to various locations upon request, using own transportation. Travel may be a routine or schedule, or may change from day to day
  • High school graduate or equivalent. Completion of an Orthopedic Technology, Athletic Trainers or Physical Therapy program and be certified by the governing board of that field or equivalent orthopedic experience required. Board for Orthotics/Prosthetics certification (BOC) a plus
  • 4+ years experience in a hospital, clinic or office, or as an independent contractor working directly in the care of the orthopedic patient or related experience. Demonstrated experience with the application of soft goods/functional bracing; dealing with multiple physicians in a high volume clinic
24

Field Service Representative Associate Resume Examples & Samples

  • Installing, physically moving, changing/upgrading, and disposing of computer hardware and software products
  • Maintaining virus protection, OS & service packs, general operations, and providing back-up and disaster recovery
  • Associate’s degree or equivalent from two-year college or technical school and 1 - 3 years related experience, or equivalent combination of education and experience
  • Corporate or factory environment work experience preferred
  • Entry-level knowledge of network infrastructure
25

Visiting Field Service Representative Resume Examples & Samples

  • Pre-planned regular travel to a number of our customers throughout the world ranging from individual tasks (taking several days), to establishing new FSR locations, or standing in for an existing FSR (for a maximum of 90 days)
  • Flexibility and exceptional relationship management skills
  • When not deployed in a Flex FSR capacity, the individual could be required to assist the Operations Centre Service Desk with Technical Query Answering or undertake training in preparation for an upcoming assignment
  • Experience of aircraft propulsion system and maintenance at ML1 / ML2 is essential; you will have been trained within the propulsion trade or come from a relevant Engineering / Service Engineering discipline, or holds equivalent qualifications
  • Experience with multiple engines will be an advantage
  • Excellent Communication skills (both verbal and written)
  • Responsiveness / Flexibility / Agility/ Integrity and trust
  • Dealing with ambiguity and problem solving
  • Quality and continuous improvement awareness
  • Knowledge of Regulatory Requirements and HS&E standards
  • Project management experience can be an advantage