Manufacturing Quality Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the manufacturing quality job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

A Goodwin

Albin

Goodwin

69483 Mante Center

Chicago

+1 (555) 287 2202

69483 Mante Center

Chicago

Phone

p +1 (555) 287 2202

Experience Experience

Phoenix, AZ

Manufacturing Quality Technician

Phoenix, AZ

Deckow, Toy and Mohr

Phoenix, AZ

Manufacturing Quality Technician

Receives general instructions on routine work and detailed instructions on new assignments
Review complaints in accordance with established company procedures and worldwide regulations and standards
Fully-qualified employee with good knowledge of the job
Analyzes information and frequently resolves a variety of problems through research of multiple alternatives
Refers complex issues to higher levels
Decisions and results have a moderate impact on department resources and objectives
Review, evaluate and accept complaints to ensure the information is sufficient for a complete investigation

Detroit, MI

Manufacturing Quality & Inspection Technician

Detroit, MI

Daugherty, Daniel and Wuckert

Detroit, MI

Manufacturing Quality & Inspection Technician

Provide evaluation, constructive feedback and leadership in the development of internal and external engineering, manufacturing, or service documentation
Performs USP, EP, and ACS testing on raw materials
Test production assemblies and sub-assemblies for correct operation and compliance to performance specifications
Writing and developing SOPs
Lead EHS projects/activities designed to eliminate hazards and improve overall safety of job operations
Utilizing initiative and independent judgment, construct and assist in evaluating engineering models
Lead compliance and quality activities by looking for defect trends, learning about quality issues and concessions and passing information to other technicians. Serve as the manufacturing expert on new product introductions by providing feedback to engineering and manufacturing personnel as new products are developed and new procedures are implemented

present

Detroit, MI

Manufacturing Quality Leader

Detroit, MI

Jacobson, Bailey and Heathcote

present

Detroit, MI

Manufacturing Quality Leader

present

Drive and own improvement projects related to internal and external quality initiatives and lead teams in process improvement identification and implementation
Track and trend defects to develop and drive specific continuous improvement initiatives, plans and projects
Direct generic process / product improvement programs and provide process method excellence throughout the organization
CoQ – develop and drive initiatives to reduce scrap, rework and warranty costs. Partner with materials and project teams to minimize inventory obsolescence
Conduct investigation/research and provide analysis for quality issues
Provide leadership for organizational Quality and Technical activities
Own and maintain all plant quality statistics (external/internal ppm, scrap, rework, control levels, CAR’s)

Education Education

Bachelor’s Degree in Manufacturing Engineering

DePaul University

Bachelor’s Degree in Manufacturing Engineering

Skills Skills

Excellent systems knowledge (instrument hardware as well as reagents) is highly desired
Expands technical knowledge and skills beyond basic practices and procedures within own area
Fully-qualified employee with good knowledge of the job
Excellent verbal and written communication skills
Good computer skills to include email and Microsoft applications
Good time management skills
Receives general instructions on routine work and detailed instructions on new assignments
Ability to operate various types of hand tools and test equipment such as Volt-Ohm Meter, Oscilloscope, and Logic Analyzer. Read blue prints, assembly drawings, bill of material, wiring diagram, follow assembly instructions and schematics written in English
Knowledge of Immunoassay or Chemistry product lines
4+ years of experience

Create a Resume in Minutes

15 Manufacturing Quality resume templates

Read our complete resume writing guides

Manager Americas Manufacturing Quality Resume Examples & Samples

Provides direct and ongoing leadership for an organization of multiple subordinate managers and individual contributors designing and developing quality assessment, management and improvement solutions utilizing multiple disciplines for products, systems, and services
Manages headcount, deliverables, schedules, and costs for multiple ongoing projects and programs, ensuring that resources are appropriately allocated and that goals, objectives, timelines, and budgets are met in accordance with program and organizational roadmaps
Engages with program managers, marketing, supply chain, technical leaders and executives to communicate program status, escalate issues, and guide and influence strategic decision-making
Manages relationships with outsourced partners and suppliers, including setting expectations regarding deliverables, product quality, schedules, and costs; ensures that team members are effectively communicating and collaborating with outsourced resources
Provides overall people-care management for direct reports, including hiring, setting and monitoring of annual performance plans, coaching, and career development; drives and fosters organization-wide performance standards, expectations, and practices to support ongoing team member and process development
Bachelor's Degree or equivalent experience required. Advanced university degree preferred
Lean Six Sigma or other Quality certification preferred
Typically 10 or more years of related work experience, including 5 or more years of people management experience
Advanced leadership skills, including coaching, teambuilding, conflict resolution, and management
Advanced project management skills including time and risk management, resource prioritization, and project structuring
Strong people management skills to drive workforce development across geographies and achieve desired results
Advanced communication skills catered to a wide variety of audiences. (e.g. written, verbal, presentation); mastery in English and local language
Superior business acumen, technical knowledge, and industry experience encompassing one or more quality management domains
Advanced multi-tasking and prioritization skills
Advanced relationship management skills, including partnering and consulting
Strong understanding of HP’s policies and processes

Manufacturing Quality Inspector Resume Examples & Samples

Witnessing of various quality operations performed at the plant
Verifying that other operations have been performed by outside vendors
Performance of visual inspection of small vessel halves prior to welding
Documenting various quality oriented operations

Manufacturing Quality Supervisor Resume Examples & Samples

Directs the daily activities of all PMA inspection personnel (40%)
Provides departmental resources in support of part conformities, new STC activity, etc. (30%)
Performs administrative tasks such as regulatory research, PMA supplement submissions, training, etc. (15%)
Maintains data in the PMA log; electronic records; and hard-copy historical files (10%)
Other duties as assigned by Team leader (5%)
Must have a minimum five (5) years inspection experience in manufacturing environment
FAA designation of DMIR or DAR-F authority preferred
Must be able to read and interpret technical data
Must be able to read and understand applicable 14CFR Part 21 requirements and related FAA Orders
Material handling/processing experience preferred
Must have minimum three (3) years SAP experience
Must have good inter-personal skills
Occasional overnight travel maybe required (5%)
Must speak, read and write English fluently
Well groomed and maintain a professional appearance
Must pass a seven (7) year background check and pre-employment drug test
Must be legally authorized to work in the country in which the position is located
Proficient with computer equipment and software programs such as SAP, MS Outlook, etc
Must have excellent communication skills, both oral and written
Must be results oriented
Ability to work with and in close proximity of fellow Team members and/or Thales suppliers
Ability to prioritize workload

Manufacturing Quality Eng Prof Resume Examples & Samples

Proficient in project management will be an added advantage
Equip with strong technical skills and exhibit good communication skills with all levels. Ability to work cross functional teams
Competence in manufacturing floor system and inventory system SAP/MAPICS will be an added advantage
Understand the standard mission of the professional group and vision in own area of competence
Supplier Quality Management
Understand Lean Six Sigma Concepts
Understanding of performance matrices e.g KPI (Key Process Indicator)
Degree in Mechanical / Mechatronics Engineering discipline with 3 years experience or Fresh graduates are encourage to apply

Manufacturing Quality Technician Resume Examples & Samples

Ability to operate various types of hand tools and test equipment such as Volt-Ohm Meter, Oscilloscope, and Logic Analyzer. Read blue prints, assembly drawings, bill of material, wiring diagram, follow assembly instructions and schematics written in English
Receives general instructions on routine work and detailed instructions on new assignments
Analyzes information and frequently resolves a variety of problems through research of multiple alternatives
Refers complex issues to higher levels
Responsible for moderately complex assignments where judgment is necessary in resolving problems and making routine recommendations
Decisions and results have a moderate impact on department resources and objectives
Meet regulatory requirements and follow policies and procedures
Expands technical knowledge and skills beyond basic practices and procedures within own area
Fully-qualified employee with good knowledge of the job
Applies job skills and company policies and procedures to complete a wide range of more complex activities
Attendance is a requirement of this job
Physical demands required for this position: (an example is – must be able to lift 50 lbs)

Manufacturing Quality Program Manager Resume Examples & Samples

5 years of experience with automotive specific manufacturing quality systems: TS16949 and ISO9001
5 years direct experience implementing automotive specific technical quality requirements in a high-volume wafer-manufacturing facility
5 years auditing experience with quality management system standards, customer specific, regulatory and/or governmental requirements
5 years’ experience working with and or managing teams using and converting technical data into customer presentations
MS degree in a related engineering field (Electrical Engineering, Mechanical Engineering, Chemical Engineering) or equivalent

Manufacturing Quality Resume Examples & Samples

Undergraduate students in the following disciplines: Mechanical Engineering, Aerospace Engineering, Aeronautical Engineering or equivalent
Fluent in Italian
Passion for technology, team player, process oriented, curious, flexible and open minded

External Manufacturing Quality Lead Resume Examples & Samples

A minimum of a Bachelor’s Degree (or equivalent degree) is required
A focused degree in Engineering, Chemistry, Biology, or Biological Sciences is preferred
A minimum of 7 years (or an Advanced degree/MBA in related discipline and a minimum of 4 years) of GMP experience in Pharmaceutical, Medical Device, OTC Drug, Cosmetic and/or Food and Dietary Supplements Production is required
Detailed working knowledge of cGMP requirements and current FDA enforcement issues required
Prior experience leading investigations and overseeing CAPA processes is highly preferred
Experience providing quality oversight of external manufacturing sites is a plus
Experience in internal and FDA /other Health Authorities during audits is preferred
Experience in MS Word, Excel, and Power Point applications is required
Demonstrated ability to lead cross-functional teams and collaborate with internal/external partners including interfacing with senior levels of management is required
Experience and demonstrated skills in navigating in a matrix environment, managing complexity, collaborating across boundaries and influencing without authority required
This position will be based in one of the following locations Skillman, NJ, Guelph, ON or Markham, ON and may require up to 30% domestic and international travel.Quality (Generalist)

Reagent Manufacturing Quality Supervisor Resume Examples & Samples

Provide direct supervision/leadership for Quality personnel, including performance management, hiring of new employees, and guiding career development of direct reports
Schedule and document training for departmental personnel
Ensure team’s compliance with good documentation practices and quality system requirements
Coordinate scheduling for raw material and finished product qualification activities in collaboration with other functional areas to ensure that raw material qualifications are completed within specified timeframes
Oversee and perform the following: preparation of reagents for raw material testing; testing of raw materials and finished products, analysis of data from test results; and completion of testing documentation and reports
Generate and/or complete reviews of standard operating procedures and forms for testing protocols and departmental policies
Facilitate the transfer of testing processes from development to manufacturing
Interface with other functional groups to gain alignment in the development of raw material testing processes and documentation
Participate in and/or lead testing of raw materials for reliability and stability
Ensure laboratory and testing equipment are qualified and maintained according to established procedures and requirements
Maintain records and clean room environment to comply with good manufacturing practices and standard operating procedures
Assist in inventory management
Lead continuous improvement of products, personnel, and processes

Manufacturing Quality & Inspection Technician Resume Examples & Samples

Discard or reject products, material and equipment not meeting specifications Inspect, test, or measure materials, products, installations and work for conformance to specifications
High school diploma/GED plus 2 years working experience in Manufacturing or Laboratory
Ability to speak, understand, read, and write in local language
Proficient with software applications applicable to the job
Technical / Associate Degree
Three years relevant experience in quality and/or inspection
Experience in making process improvements

Manufacturing Quality Intern Resume Examples & Samples

MS office, specifically excel spreadsheets
A 3.0 GPA or higher is preferable
Experience or Class Room Training in Statistics, Quality Control, and Operations Management preferred
Work will be performed in a Manufacturing Environment with extended exposure to noise, dust, paint fumes etc

Manufacturing Quality & Inspection Technician Resume Examples & Samples

Performs required analytical testing on in-process and final products
Performs USP, EP, and ACS testing on raw materials
Testing using HPLC, FTIR, ICP-OES, UV/VIS, Liquid Scintillation, and Gamma Spectrometer
Tracking and trending of analytical data
Participates in validation projects requiring analytical support
Writing and developing SOPs
Contributes to process improvement through Lean, 5S, and six sigma tools
Assists in the stocking and supplying of the QC lab
Performs visual inspection of finished product
Knowledge and understanding of Stop Orders, Concessions, ESD, Calibration, Preventative Maintenance, Material Identification & Segregation, documentation configuration control practices; documentation & disposition of non-conforming material, and Good Documentation Practices requirements, as associated with this job type/position
Associate degree plus 2 years working experience in Manufacturing or Laboratory, or Bachelor’s degree
Must be available for nights, and weekends as needed
Must have the ability to distinguish color
Be able to work weekends/Rotation of shifts
Waters Empower Experience or similar software
Equipment experience with HPLC, ICP, UV/Vis, FT-IR
Experience working with radioactive material including the use of gamma spectrometers, Ion Chambers, and liquid scintillation analyzers
Visual inspection experience
Working knowledge of USP
Experience in a FDA regulated QC environment
Background in Math or Chemistry

Manufacturing Quality Leader Resume Examples & Samples

Provide leadership for organizational Quality and Technical activities
Direct generic process / product improvement programs and provide process method excellence throughout the organization
Track and trend defects to develop and drive specific continuous improvement initiatives, plans and projects
CoQ – develop and drive initiatives to reduce scrap, rework and warranty costs. Partner with materials and project teams to minimize inventory obsolescence
Provide the technical leadership on problem identification, root cause, and overall resolution of customer complaints and quality issues
Data books – this position owns the process for preparation of data books required to support customer contracts consistently across the Pressure Control manufacturing plants
Select, hire, train, and provide ongoing leadership of assigned personnel to meet schedules, quality metrics, and organizational goals
Manage generic manufacturing process programs and lead area in pursuit of state of the art technology and processes that will enhance organization’s production in accordance with QMS requirements
Responsible for audit support and finding resolution for all internal, customer, and certification body audits for the plant
Non-conformity management and resolution
Calibration responsibility for tools and gauges
Drive a continuous improvement culture and define actions to enable the plant to become best in class when it comes to the quality of products or services delivered
Compile and report all organization measurements on quality and cost of quality
Bachelor's degree from an accredited university or college
At least 5 years of experience in Quality Management, Quality System Planning and Quality Improvement methods
Additional leadership experience in the areas of Operations, Manufacturing, or Quality
Six Sigma Black Belt or Master Black Belt certification
Demonstrated ability to excel in all customer service areas
Responsible for meeting customer / business needs as well as developing direct reports

External Manufacturing Quality Lead Resume Examples & Samples

Detailed working knowledge of cGMP requirements and current FDA/Health Canada enforcement issues required
Experience in internal and FDA /other Health Authorities audits is preferred
This position will be based in one of the following locations Guelph, ON or Markham, ON and may require up to 30% domestic and international travel

Director, External Manufacturing Quality Resume Examples & Samples

Assures the development and maintenance of a Quality Agreement with the EP’s. Provides input into the development of contractual agreements with the EP’s
Executes a program of calibrated Quality oversight based on the product type, capabilities, and quality and compliance performance of the EP
May have the responsibility for oversight of an EP involving releasing sterile pharmaceutical products, API intermediates, API, non-sterile pharmaceutical products, biologics, drug delivery devices and consumer care products to other sites and/or to the market with the assurance that the goods were produced in conformance to all applicable policies and procedures of MSD and compliance with all governing regulations. Before shipment, he/she will assure that products manufactured by the plant have the correct quality and identity, meet all pertinent specifications and special requirements, and have been produced by approved processes and under proper conditions
Has responsibility for Quality assurance and control functions to include direct support to EP’s, coordination and oversight for product testing, as well as other relevant components as determined by applied calibrated Quality oversight. These components may include review of batch documentation and deviation investigations
Has responsibility for maintenance and oversight of ongoing supplier performance management to include regulatory inspection support and monitoring, internal complaint management, internal customer feedback coordination, and review of annual product reviews
Reviews all audit outcomes pertaining to the EP’s and ensures appropriate and timely corrective actions are identified and implemented
Monitors efforts to improve the EP’s quality and reliability through ongoing oversight and formal communication programs and forums
Provides support to the EP’s to facilitate and validate new product introductions. Provides compliance input and support, as appropriate for implementation of analytical methodology and process development initiatives. In conjunction with other internal MSD departments (ACDS-SAS, GPC, EMT), ensures that EP’s are inspection ready for all new product introductions or transfers
Develops presentations for Quality Council meetings. Provides oversight for presentation content and may support issuance of minutes
Coordinates significant investigations including Fact Findings and product recalls as needed
Operates in a safe and efficient manner and in compliance with the Manufacturing Division Q.O. Safety and Health Policy
Conducts quality due diligence assessments for pre-approval considerations of new EP’s. Supports the EP in remediation of due diligence and pre-contract audit gaps. Assures the development and maintenance of a Quality Agreement with the EP. Acts as the Quality expert on MSD's behalf regarding contractual negotiations and provides input into the development of commercial contractual agreements with the EP on quality related terms
May act as a the regulatory compliance liaison on MSD’s behalf to interface with regulatory agencies
Closely collaborates with appropriate business and operations areas to achieve Manufacturing Division and MSD objectives
Degree in Biology, Microbiology, Pharmacy, Chemistry, Chemical Engineering (or equivalent)
Strong knowledge of and broad experience in Quality Assurance and Quality Control activities. Must have site leadership experience
Strong demonstrated communication skills
Demonstrated personal networking and relationship building skills
Conversant with all domestic and foreign regulations governing plant operations
Contractual and financial awareness

Head of Manufacturing Quality Resume Examples & Samples

Bachelor's or Master’s degree in Manufacturing Engineering, Electrical Engineering, Mechanical Engineering or related field
Possess excellent verbal and written communication skills
Proven track record of delivering multiple priorities with limited resources in a cross-functional organization

Manufacturing Quality & Reliability Engineer Resume Examples & Samples

High motivation and drive
Self-direction
Good communication, interpersonal, and problem solving skills
Sense of urgency, and work well under pressure
Ability to work well individually AND in a team environment across functional and organizational boundaries is required
Excellent communication, documentation and presentation skills are required
Must have either a BS or MS in Electrical Engineering, Physics, Optical Science, or related technical field
At least 4 years' experience with characterization of high speed modules SoC/optical or server boards and systems: components and structure, assembly principles, operation, test methods of performance and reliability, and failure analysis
Experienced in using data analysis tools and scripting JMP etc
At least 2 years' experience with high speed IC testing analog characterization and test automation
1+ year experience in bench-top optoelectronic device/module testing
1+ years experience with reliability testing of ICs/optical components
1+ year experience with semiconductor device physics lasers, detectors, modulators etc
1+ years experience with testing systems, including hardware and software Matlab, LabView

Technical Manufacturing Quality Co-op Resume Examples & Samples

Must be a current student pursuing a degree in business or engineering with a focus on technology or an IS-related discipline (Information Technology, Management Information Systems, Computer Engineering, Computer Science, etc.)
Must be able to work 30-40 hours per week, Monday-Friday, beginning in January 2017
Strong program management skills and a proven sense of urgency and resourcefulness
Excellent communication skills and interpersonal skills
Self-starter, intellectually curious and active learner
Ability to work in a fast-paced, potentially high-pressure environment
Ability to interact clearly with business users to ensure that software solutions fill strategic business needs
Willingness and ability to work with multifunctional teams in North America and travel as needed within North America
Internationally mobile for future career opportunities within RB

Manufacturing Quality & Inspection Technician Resume Examples & Samples

Interfaces with other departments in the execution of duties to ensure the orderly flow of materials and information
Utilize basic technical communications throughout the new product cycle to improve internal models and/or externally sourced components in terms of system performance, reliability, functionality, and serviceability
May participate in quality control inspections of certain subassemblies and final product
Training: Aware of and comply with GEHC training requirements
Knowledge and understanding of production process, work instructions, documentation configuration control, non-conforming & rework documentation requirements and operates within them to ensure that a device conforms to it’s specification
Proficiency to logically troubleshoot at subsystem and system level, using identifiable problem solving techniques
Quality inspection, auditing and testing experience
Experience with implementation of corrective action programs
Product or industry-specific experience8. strong computer skills including Microsoft Office and databases
Knowledge of tools, concepts and methodologies of QA
Knowledge of relevant regulatory requirements
Bachelor’s degree or associates with 5 years of GMP experience
Knowledgeable in ISPE's guidelines for Good Automated Manufacturing Practice (GAMP)

Manufacturing Quality Leader Resume Examples & Samples

Associate's Degree from an accredited university or college (OR a High School Diploma / GED with a minimum of 7 years of experience in quality management)
4-year Degree in Engineering, Business management and/or related field
Minimum of 3 years' experience in Production Quality Control
Ability to interface with all levels of management, and make and keep commitments
Ability to maintain numerical and written records
Proficient with Microsoft excel, word, PowerPoint
Strong leadership and administrative skills
High degree of safety knowledge
Able to direct the work of others
Work well with others
Passionate about manufacturing and continuous improvement

Manager of Manufacturing Quality Resume Examples & Samples

5+ years managing a manufacturing quality team
Experience driving partners to improve manufacturing processing that improve product quality
Experience in Lean and/or Six Sigma projects

Backend Manufacturing Quality Senior Engineer Resume Examples & Samples

Collaborate and drive alignment from Quality into Manufacturing
Validate customer requirements and partner with the Back End to drive plan and business process that will reduce quality deviation and provide customers with a Quality product
Work with the Back End to align business processes and close loop with customer feedback such as RMA
Partner with manufacturing to develop quality plan for continuous improvement
Be the driver of working knowledge for quality concepts, standards and requirements
Perform disposition function for unplanned deviations, be a key member of the change control board and perform risk assessment, work with MFG teams on RMA pareto’s and ensure root cause, and ensure that customer requests are being met by MFG teams
Drive Quality methodology such as FMEA, SPC methodologies into BE MFG sites
Drive efficiency in MQA work processes, identify, and monitor key performance indicators (KPIs)
Develop strong relationships with business partners to improve business process performance

Manufacturing Quality Technician Resume Examples & Samples

Responsible for ensuring the production quality of all products in accordance with established Lean Manufacturing workmanship standards, assembly procedures, ISO 9001:2000 Quality System requirements and the Eaton Quality System
Assist in quality audits, workmanship defect reduction efforts, corrective and preventive action identification, analysis and reporting, inspection of returned units, special inspections
Assist departments in meeting product quality targets by working closely with Engineering, Materials Management and Operational Excellence
Perform inspection support activities on in-process and completed assemblies as required
Analyzes and reports production non-conformances. Coordinates feedback on problems affecting quality, BOM, tooling issues, raw materials, training and prints) to Supervisors and Quality Engineers., Mfg. Engineers, or product Engineers as needed
Initiate, participate in and/or coordinate internal 8D corrective actions (CARs), Failure Effect Mode Analysis, and Control Planning to include follow-up of vendor 8D corrective actions
Train and educate associates in product inspection to drive performance improvements and communicate quality standards on an ongoing basis to Production Supervisor and teams as needed
Create OBA programs and assist in developing actions for continued Quality System improvements
Follow commitment to Eaton Health and Safety (EHS) by following safety policies and procedures, setting safety objectives and following JSA and PDA procedures
Associate’s Degree in the electrical or electronics field required from accredited institution
Minimum of 3 years’ experience in quality, manufacturing, and/or engineering of electro- mechanical devices
Relocation assistance is not available for this position. Only candidates in the immediate geographic area of Youngsville, NC (60 mile radius) will be considered
Basic understanding of the principles and methodology of Quality Control and Quality Assurance
Must have basic computer skills
Ability to distinguish colored wired
Ability to frequently stand, bend, and walk
Ability to use standard computer applications: Excel, Word, Access, PowerPoint required
Ability to use good judgment and problem solving skills to make informed decisions
Demonstrates a strong customer service attitude
Ability to prepare, read, analyze, and interpret product drawings, manufacturing documents, quality specs, and industry/trade magazines
Working knowledge of ASQ and ISO auditing standards
Understanding of Six Sigma and Lean Manufacturing concepts preferred
Lock-out/ Tag-out Knowledge
Pressure gage knowledge
HALT / HASS and Chamber basics and concepts

Manufacturing & Quality Future Leaders Programme Resume Examples & Samples

Academic qualifications (e.g. Biology, Bio-Engineering, Chemical Engineering, Engineering, Pharmacy, Pharmaceutical Engineering, Process Engineering) with very good results in the degree
Fluent in German and English (written and spoken)
Right to work in Germany
Flexibility in terms of location
Willingness for operation in laboratory and for shift work in clean rooms and production areas
First experience in GMP area and in manufacturing environment may be an advantage

Front End Manufacturing Quality Asuarance Engineer Resume Examples & Samples

Disposition of Fab lots affected by planned or unplanned deviations (including those from Special Work　Requests and Fab Conversions, or from Quality Deviations, Excursions and SBL)
Work closely with Fab stakeholders to identify and contain excursion material
Initiate and lead cross-functional MRB (Material Review Board) to conduct risk assessment and decide　upon disposition of excursion material
Update Process FMEA (Fail Modes and Effects Analysis) with latest lessons learned from excursions or customer returns.　Review and audit PFMEA accuracy on a periodic basis
Review and analyze proposed process conversion changes to ensure that the proposed manufacturing changes conform to current business standards, enhance Micron’s competitiveness in terms of wafer yields and costs, and protect Micron’s product quality

Manufacturing & Quality Internship Resume Examples & Samples

Masters Degree in Mechanical/Industrial/Aeronautical/Materials Engineering
Outstanding academic achievement - Top 25% class (final grade minimum 104/110 or GPA 3 out of 4)
Geographic flexibility and global mindset
Strong problem solving and mentoring skills
Six Sigma knowledge is preferred
Strong interpersonal and leadership skills

Manufacturing Quality Supervisor Resume Examples & Samples

3-5 years experience in QA manufacturing
Proven experience working with engineering and manufacturing departments
Excellent English as a working language – reading, writing and speaking
Familiar with Office applications, ERP applications

Head of Manufacturing Quality Resume Examples & Samples

To spearhead and establish Dyson requirements, supplier processes and capabilities with the Contract Manufacturer (CM) to meet medical regulatory requirements
To engage Dyson interfacing teams and functions beginning from NPD/I (New Product Development/Introduction) phase for all product categories through to end of product life
Manage a team to develop audit plans for all relevant CM in compliance with Dyson Medical Devices Supplier Qualification program
Ensure CM internal auditing and management review are adequately conducted and documented
Ensure CM procedures as defined in standards are documented, meet requirements and that SPC data demonstrates both control and improvement
Facilitate communication between CM, Suppliers and Dyson teams on all production quality and compliance matters
Ensure CM and Supplier CAPA processes are robust and followed
Identify, initiate and follow through of Supplier Corrective Action Reports (SCAR) to ensure effective corrective/preventive actions are implemented by the CM
Work with CM to help improve process capabilities, including providing input into process validation activities, such as Incoming Quality, Outgoing Quality and Product Quality requirements
Participate on Material Review Boards (MRB) to ensure that non-conforming product is properly investigated and disposition. Work with the Supplier Quality team to correct non-conformances
Work as Dyson representative with notified bodies and FDA as required
Established and demonstrable people/team management skills
Proven ability to lead, develop and motivate a technical team in a challenging environment
Good written and verbal communication for reporting to all stakeholders at different levels, ability to convey issues concisely and accurately to all levels within the organization
Extensive experience is specifically required in issue management techniques, tools and methods e.g. 8D, 5 Whys, 5S, GR&R, DOE etc…
Experience in working in an environment where specification and process are not always predetermined
Project management experience, not just leading but delivering technology projects into production with high levels of success
Analytical and data driven with an ability to generate a concise argument to support their views
Motivated by driving continuous improvement programs especially in areas of cost reduction

Manufacturing Quality Technician Resume Examples & Samples

Review, evaluate and accept complaints to ensure the information is sufficient for a complete investigation
Verify the initial complaint classification is correct
Review complaints in accordance with established company procedures and worldwide regulations and standards
Contact customers in the field to obtain all necessary information to investigate fully
Exercise judgment within defined procedures and practices to determine appropriate action
4+ years of experience
Medical Technology / Clinical Laboratory background preferred
Knowledge of Immunoassay or Chemistry product lines
Excellent systems knowledge (instrument hardware as well as reagents) is highly desired
Good computer skills to include email and Microsoft applications