Process Engineering Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the process engineering job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

  • Craft your perfect resume by picking job responsibilities written by professional recruiters

  • Pick from the thousands of curated job responsibilities used by the leading companies

  • Tailor your resume by selecting wording that best fits for each job you apply

Noavatar-profile
TS
T Schroeder
Tom
Schroeder
2883 Jamel Ville
Detroit
MI
2883 Jamel Ville
Detroit
MI
Experience Experience
01/2015 – present
Phoenix, AZ
Process Engineering Specialist
Phoenix, AZ
Process Engineering Specialist
01/2015 – present
Phoenix, AZ
Process Engineering Specialist
01/2015 – present
  • Manage and coordinate all activities to assure the Safety, Quality, and Productivity on the shop floor in the Assembly area
  • Guide, train, and support employees
  • Recognize and rectify bottleneck situations
  • Investigate Quality problems
  • Visualize and verify result data
  • Work with Planning and Construction department
  • Optimize production, production quality and the cost situation by recognizing the potential for rationalization as well as by improving workplace design and safety
01/2010 – 11/2014
Philadelphia, PA
Process Engineering Manager
Philadelphia, PA
Process Engineering Manager
01/2010 – 11/2014
Philadelphia, PA
Process Engineering Manager
01/2010 – 11/2014
  • Provides technical and management direction to the PD group by making sound decisions based on facts and balancing them with performance, schedule, and cost
  • To perform process technical development to achieve strategic imperatives and improve cost effectiveness
  • Provide measures to improve the efficiency and effectiveness of supply chain through continuous involvement in the research and development process
  • Lead the Process Engineering team. Manage team on process development, project execution, production line setup, production line improvement, etc
  • Provides guidance to the work unit and advises managers and supervisors on issues related to sub-function
  • Manages and approves work performed by outside contractors
  • Provide leadership support of lean production principles to create or improve material flow
02/2007 – 11/2009
Houston, TX
Process Engineering Technician
Houston, TX
Process Engineering Technician
02/2007 – 11/2009
Houston, TX
Process Engineering Technician
02/2007 – 11/2009
  • Provides technical assistance to process development and engineering personnel
  • Work with Engineering, Manufacturing and Quality teams to develop processes for new products and improve processes of existing products
  • Work with Quality/Production to create procedures, flow charts and training aids
  • Assist management with improving the efficiency of manufacturing processes
  • Determine root cause of process issues and make improvements
  • Make recommendations to improve manufacture of new and existing products
  • Assists engineers with outside third party developments
Education Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
University of Central Florida
Bachelor’s Degree in Engineering
Skills Skills
  • Knowledge of basic Project Management and presentations tools (e.g., Microsoft Project, Visio, PowerPoint)
  • Knowledgeable in cGMP’s and aforementioned guidelines for bioprocessing
  • Advanced knowledge of project management techniques directing professionals
  • Strong verbal and written communication skills
  • Ability to build relationships
  • Strong leadership skills
  • Demonstrated ability to enhance team building, and to participate as a leader or member on a cross-functional and self-directed work team
  • Demonstrated ability to generate options to resolve problems, prioritize solutions, determine appropriate course of action, gain consensus on that recommendation, and implement the decision
  • Ability to communicate clearly and concisely, both orally and in writing
  • Strong technical understanding of the pharmaceutical industry and engineering practices
Create a Resume
1

Paint Process Engineering Intern Resume Examples & Samples

  • 0-1 years of professional work experience in related field
  • Bachelor degree or in process; Technical degree or in process
  • Strong systematic thinking and problem solving skills
  • Good working knowledge of Microsoft Office; Good Technical Writing Skills
  • Lab testing experience; Quality Analysis
2

Mems Process Engineering Intern Resume Examples & Samples

  • Optimize fab processes for quality and yield
  • Apply statistical process control (SPC) methodologies to characterize and optimize new wet etch production processes
  • Document and present project methods and results
  • Completion of at least 3 years in engineering or physical sciences (ChemE, Chemistry, MatSci, Physics, EE, ME
  • Strong written and spoken communication skills
  • Demonstrated working knowledge of engineering fundamentals
  • Ability to work & effectively interact with team members from other disciplines, projects, organizations, cultures & companies
3

Specialist, Process Engineering Resume Examples & Samples

  • CEB (Corporate Executive Board)
  • 5-7 years of work experience in a process engineering or business related function (e.g. Process engineering, operations, project management, information technology, strategy development, organizational design, change management)
  • Experience with either Six Sigma or Lean Manufacturing Concepts
  • Formal Green Belt or Black Belt certification in Six Sigma training
  • Quick ability to get to understand our organization, LOB’s and branch/back office processes
  • Experience with Business Analysis Methodology
  • Demonstrated ability to work with multiple stakeholders, including senior levels of the organization
  • Broad strategic thinker with clear vision
  • Efficient at assembling data, structures information and executing rigorous analysis
  • Sound negotiation and interpersonal skills, ability to build consensus
  • Proven ability to combine aggressive initiative with professional discipline and demeanor to accomplish difficult tasks through other people
  • Experience leveraging formal and informal networks to achieve results
  • Zest for action, desire to seize opportunities as they arise, and drive towards goals with energy and enthusiasm
4

Associate Specialist, Process Engineering Resume Examples & Samples

  • International Quality & Productivity Center (IQPC)
  • University degree preferably in Industrial Engineering, however flexible in Economics, Commerce, Business, Math / Computer Sciences or Engineering, OR equivalent work experience
  • 2-3 years of process engineering experience
  • Proficient analytical and problem solving skills
  • Strong conceptual and organizational skills
  • Process-oriented in order to see the full picture, but also detail-oriented in order to understand the elements that impact a process
  • Excellent interpersonal, negotiation and mediation skills
  • Knowledge of project management methodology
  • Ability to achieve results in an ambiguous and dynamic team-based environment
5

Senior Manager Future Process Engineering Resume Examples & Samples

  • Educate and train colleagues by sharing knowledge on an on-going basis
  • Stay connected to relevant current and upcoming research, technologies, methods, and industry trends. Build an effective information network
  • Identify and partner with industry-leading organizations to extend the capability of the team
  • Consider legal implications of innovative concepts, working with the legal team to protect product, technology, innovation, process, and design
6

Process Engineering Leader Resume Examples & Samples

  • Cell culture (cell banking, inoculation, seed/production train, harvest/clarification)
  • Bioprocess analytics and technology (cell density, cell viability, metabolite profiling, substrate analysis, respiratory parameters for cell culture)
  • Good engineering practices (procedures and standards for engineering lifecycle covering requirements, specification / design, verification, acceptance / release, operation, maintenance and continuous improvement)
  • 50%: Functional Management – Responsible for performance management and professional development of direct reports. Allocates resources, assigns priority to tasks and acts as an advisor to senior management in delivery of value-added services for Engineering. Manages budgets and contract resources
  • 25%: Operational Support and Technical Ownership – Responsible for development of technical subject matter expertise and provision of adequate resources (internally and externally) to ensure system reliability, robustness and maximum availability. Accountable for the technical quality of systems supporting cell culture areas at Shire
  • 15%: Technology Transfer / Project Support - Accountable for the technical quality of facility fit assessments and systems modifications in support of new product introductions (NPI). The Engineering Associate Director will ensure that project sub-teams are resourced appropriately (internally and externally) to meet their goals and objectives and ensure that projects are on time and on budget. In addition to engineering design resources, systems commissioning and qualification support will be appropriately resourced to meet these objectives
  • 10%:Systems Engineering - The Engineering Associate Director will liaison with Manufacturing, Facilities, Process Development, Quality Assurance, and Validation in developing requirements and recommendations for system modifications/upgrades/retrofits. The Engineering Associate Director will develop technical solutions to complex problems and work with project managers/engineers to complete design and engineering projects within schedule, budget and quality constraints
7

Process Engineering Leader Resume Examples & Samples

  • 40%: Origination and Conceptual Development
  • Generates and develops technical project scope
  • Documents all process/product, general user requirements and generates basis of design packages
  • Uses ingenuity and creative thinking to develop solutions
  • Supports project managers in development of next-phase design and / or implementation plans
  • Performs or oversees execution of feasibility studies to inform the business for ambiguous scope of work
  • 20%: Basic Design, Detailed Design, and Planning
  • Develops schematic and detailed design of systems including construction documents (P&IDs, layouts, etc.)
  • Specifies and sizes process, utility, and / or automation equipment
  • Plans, coordinates, and drives design, design review, and peer review activities
  • Manages external project engineering services effectively
  • Leads design reviews and risk assessments to identify critical aspects and verification methods Ensures development of FAT, commissioning & verification plans
  • 15%: Implementation and Close Out
  • Reviews and approves submittals
  • Ensures successful FAT, SAT, commissioning, and verification execution and approval
  • Ensures completion and turnover of all project origination design development, and ETOP documentation
  • Supports final robustness and fitness for use checks
  • 25%: Standards, Templates, and Procedures
  • Develop project engineering procedures, guidelines, and tools to help achieve consistency
  • Evaluates Shire’s practices against best practices and identifies program improvements
  • Creates URS/FRS/DDS templates for use across sites
  • Develops standardized commissioning and verification templates
  • Bachelor’s degree in an Engineering discipline with the preference being Chemical, Mechanical Engineering, with fifteen plus (15+) years of experience in an engineering role within the pharmaceutical, biotechnology or FDA regulated industry
  • Master’s degree in Engineering and biopharmaceutical manufacturing/operations experience is preferred. In-depth knowledge of core principles across process engineering areas (e.g. cell culture, purification, CIP, SIP, autoclaves, etc.), facility design and Good Engineering Practice (GEP) is required
  • Knowledge of Quality by Design (QbD), Quality Risk Management (QRM) based on ICH Q8, Q9, and Q10 guidelines and experience with implementing systems following the ASTM E2500 framework is desirable
  • Must be able to independently plan, coordinate, and ensure completion of project engineering and management team deliverables
  • Excellent interpersonal, teamwork, and leadership skills required
  • Establishes operational objectives and assignments which are reviewed by senior management to determine success of operation
  • Ability to multi task in a dynamic environment with changing priorities
  • Proficiency with Microsoft Products; ability to learn additional software applications as the need arises
8

Specialist, Process Engineering Resume Examples & Samples

  • University degree in Engineering, Business, or a technical discipline
  • 2 to 3 years of process engineering experience
  • Familiar with either Six Sigma or Lean Manufacturing concepts, specifically Kaizen, 5S, and/or PDCA improvement methodologies
  • Certification or eligibility for certification as a Green Belt (Lean/Six Sigma) would be considered a strong asset
  • Knowledge of approaches, tools, techniques for recognizing, anticipating and resolving organizational, operational or process problems. Analyzes and synthesizes information and devises alternative resolution strategies and associated pro's and con's
  • Proficiency in MS Office (Excel, Word, PowerPoint, Visio, Access, Project) and Minitab for documentation, modeling, and analysis purposes
  • Knowledge of and experience using SIMUL8 modeling software would be considered a strong asset
  • Ability to work independently or with a variety of team members in a constructive and collaborative manner
  • Ability to establish and maintain healthy working relations and partnerships with internal clients, vendors, and peers
  • Well-developed presentation and communication skills, both written and oral
  • Ability to effectively manage multiple activities of varying complexity while under time constraints
9

CO OP Analyst Operational Risk & Process Engineering Resume Examples & Samples

  • Work with the Manager - Process Engineering to resolve highly complex, multi-faceted problems to meet the business needs of Derivative Products
  • Operations with a focus on creating Improvements through the application of project management and business skills. Direction will be provided by the Director - Derivative Product Operations and/or Manager - Process Engineering
  • Support projects to implement solutions to business problems. This involves testing procedures and workflows and development of user documentation
  • Develop computer based desktop solutions to meet the day to day needs of the Derivative Product Operations group. Documentation of new workflows and controls for training and audit purposes
  • Operation of management metrics process that provides necessary MIS / Dashboards to GWS Senior Management for decision support purposes
  • Ensuring management is kept informed and that problems and issues are escalated appropriately
  • Continually acquire and enhance knowledge of the division's business strategies and policies, regulatory requirements, Back Office processes, and rapidly changing technology to effectively assist in the provision of business solutions and services to the end user business lines
  • Other ad-hoc projects for supporting operational needs, as assigned
  • Enrolled in a post-secondary educational institution in an accredited co-op program
  • Specialized knowledge of and demonstrated experience in Process Improvements and solutions implementation
  • Demonstrated knowledge of analytical problem solving
  • Experienced in change management methodologies
  • Good technical knowledge in MS Office tools (i.e. Excel), Visio or other flowcharting tool, Bloomberg API, etc
  • Strong communications and influencing skills
  • Sound negotiation and interpersonal skills
  • Good oral and written communication skills and presentation skills
  • Goal and results oriented, deadline driven and self motivated
  • Able to combine initiative with professional discipline and demeanor to accomplish difficult tasks, often through other people
  • Practical knowledge / experience in Trading Products is an asset
10

SOC Process Engineering Specialist Resume Examples & Samples

  • Execute PCM review with core SOC teams to establish current baseline and develop plans to improve, expand and advance quality, detail, control and consistency
  • Develop CMMI for each core service within the SOC to be incorporated into the SOC Strategy to measure current services and capabilities and plan improvements
  • Establish process control management practices that include measurement of key performance indicators, key risk indicators, expansion and change with new technology and capabilities and inclusion in monthly and quarterly oversight processes
  • Develop operations control procedures in partnership with SOC Risk & Oversight
  • Lead all audit supporting tasks and continue to improve SOC regulatory compliance
  • Specialize in an information security incidents response operation function and participate in the global development and rollout
  • Progressive senior IT experience, ideally holding positions in both IT Infrastructure & Operations as well as Information Security event management
  • In-depth knowledge of information security standards, best practices, processes and systems
  • Strong written and verbal communication skills with a demonstrated ability to build strong relationships and rapport with team members, peers, partners and suppliers
  • Strong analytical, documentation, and communication skills, both oral and written·
  • Good team working skills and ability to work in a distributed global team environment·
  • Demonstrated experience leading diverse teams of information security experts and an ability to solve complex challenges
  • Strong consultative, advisory and influencing skills to drive development standards
  • Self-motivated, proactive and with determination to achieve goals·
  • Flexible and able to deliver quality results in the required timeframe·
  • Familiar and experienced in the software development lifecycle process·
  • Overall understanding of network and application analysis
  • Experience of working with ISO90001/27001 processes and procedures
  • Preferred IS certifications CISSP, CISA, or equivalent
11

Process Engineering Manager Resume Examples & Samples

  • Manages senior staff process engineers, process engineers, process techs, and entry level staff
  • Identifies and leads key projects to support and enhance the corporate Lean Pillar strategy
  • Develops action plans and leads implementation of continuous improvement activities such as Lean Manufacturing, Six Sigma, TPM, and other as required
  • Assembles, leads, and trains continuous improvement teams in various problem solving activities including kaizen events, value stream mapping, process mapping, DOE, and other techniques as required
  • Partners directly with the Manufacturing business units and key leaders to address opportunities related to safety, quality, cost, and productivity
  • Develops action plans and programs that improve the productivity and efficiency of the various work processes of the company
  • Applies various industrial engineering problem solving and productivity techniques to evaluate the improvement of recommended strategies and programs
  • Develops and coordinates programs to recognize and reward groups or individuals for suggestions and actions related to process improvement
  • Lead and support root-cause analysis investigations, recommend and execute corrective actions and preventative actions
  • Develops and facilitates employee teams to build cohesiveness and improve the overall results of the respective teams' tasks. Drive and enhance employee engagement
  • Conduct investigations and tests pertaining to the development of new manufacturing methods, materials or processes, and investigate possible applications of results
12

Process Engineering Resume Examples & Samples

  • Builds multi-function alignment with quality assurance, engineering, manufacturing and other relevant business units or departments by engaging and directing resolutions of complex project and tactical initiatives
  • Identifies best process solutions on controversial issues. Mentors other partners in skill development and quality leadership. Provides training and education when needed
  • Develops top-level process enhancement and experimental designs for the technical functions of customer operations. Generates technical solutions in a cost-effective manner. Obtains appropriate level of information and analyzes complex problems to produce tactical and strategic decisions to improve quality
  • Influences team and organizational direction to build cross-functional alignment
  • Initiates technical strategies to meet changing business needs. Balances trade-offs and conflicting priorities to gain cross-functional concurrence
  • Consumer products or food company and plant experience, either technical or production (7 years)
  • Engineering (electrical, mechanical, chemical or industrial) (7 years)
  • Project management (7 years)
  • Supervising professional and nonexempt partners, which may include project teams and contractors (7 years)
  • Advanced knowledge of project management techniques directing professionals
13

Director of Process Engineering Resume Examples & Samples

  • Actively participate as a member of the SCLT in order to identify, develop and direct the company’s vision, strategy, and performance goals
  • Effectively set expectations as a leader by exhibiting professionalism and integrity in all aspects of job performance. This includes the support and encouragement of all leader competencies
  • Develop the Process Engineering team in fundamentals such as methods standardization, follow up, workstation design, and capacity studies
  • Monitor the engineering function at each facility
  • Analyze monthly engineering reports for planning purposes
  • Act as a liaison between Engineers and Management
  • Report and communicate engineering process to the Vice President of Manufacturing
  • Maintain working knowledge of industry related material
  • Assign and monitor Process Engineering KPIs, measurable, and ergonomic improvements
  • Deliver prompt and accurate machine requirements as production changes or as needed
  • Identify, track, and implement cost saving procedures
  • Direct and manage the timely accuracy of reporting systems such as BOL, BOM, and PDM packages
  • Lead Process Engineering to develop timely, accurate sample procedures, such as prototypes and salesman samples
  • Determine equipment and technology upgrades that reflect appropriate current trends
  • Reaches out to industry/research for benchmarking and best practice identification in manufacturing
  • Work with Senior Management (Supply Chain, PD, etc.) on production plans, goals, and product improvements
  • Identify opportunities for our internal manufacturing capabilities to meet or exceed customer expectations for cost, quality, and delivery
  • Responsible to support Business Units in achieving goals for sample delivery from internal Supply Chain
  • Supply Chain Lead for FR Business Unit – Single point of contact for SC related issues and action plans, including appropriate two way communication
14

Director Adilab / Amil-process Engineering Resume Examples & Samples

  • Set targets and drive improvement of systems for maintaining quality materials and components from machine processes
  • Design initiatives to optimize assembly plant processing systems for throughput, cost, and sustainability
  • Facilitate scale-up from prototype-level material processing lines to production-scale systems
  • Identify and collaborate with external partners to develop programs that monitor the health of individual processes on existing and new production lines
  • Oversee initialization of new assembly lines, ensuring individual bonding, knitting, foaming, and polymer welding processes run within specification
  • Curiosity for science and engineering along with a passion for making insights in the field of sport
  • Fluent English (required), German (advantageous)
  • Cooperate well, develop and maintain relationships
  • Strong analytical skills, solution driven and result oriented
  • University degree in a relevant field
  • 10 years of working experiences
15

Process Engineering Technologist Resume Examples & Samples

  • Working under close direction of the Manager – TSO, the employee will manage projects of moderate complexity in the field of process design, process scale-up and process improvement of cosmetics / beauty care products
  • Required to provide a technical advice and guidance on process design, the employee will work closely with formulators / chemists on new and existing formulations
  • The employee shall be responsible for the scale-up of laboratory processes to pilot processes and finally to commercial processes,
  • Assess formula and equipment requirements to meet anticipated manufacturing needs, as well as analyze current processing procedures and equipment to fit to new resources when necessary,
  • Proactively investigate opportunities to improve process efficiencies and quality of products,
  • Develop new processing methods through research, calculations and empirical experimentation,
  • Liaise with plant TSO engineers, Tech Services, and / or Industrial / Mechanical engineers to facilitate information and data from mass manufacturing to filling and packaging operations,
  • Provide engineering expertise in filling operations,
  • Be experienced in GMP and have strong leadership and collaboration skills,
  • Effectively be able to engage with other functions in and outside TSO,
  • Have strong oral and written communications skills,
  • Have excellent analytical and problem solving skills,
  • Have the ability to handle multiple demands,
  • Have ability to work independently and in teams, and
  • Demonstrate learning agility
  • Required to travel between sites 10% of the time
16

Process Engineering Specialist Resume Examples & Samples

  • Manage and coordinate all activities to assure the Safety, Quality, and Productivity on the shop floor in the Assembly area
  • Guide, train, and support employees
  • Recognize and rectify bottleneck situations
  • Investigate Quality problems
  • Visualize and verify result data
  • Work with Planning and Construction department
  • Optimize production, production quality and the cost situation by recognizing the potential for rationalization as well as by improving workplace design and safety
  • Coordinate and track data for optimization
  • Monitor work regulations and accident prevention regulations
  • Evaluate audit data and compile countermeasures for the assembly process to analyze and visualize quality data, tag the initiator, and make samples and adjust these samples with QS
  • Arrange quality checks after each process/band section
  • Verify and compare the audit results and compile countermeasures based on data results
  • Provide instruction and guidance about required techniques and regulations
  • Work together with the supervisor and team leaders for improvement
  • Cooperate with Health and Safety audit teams
  • Compile short-term answers for bridge-over problems until there is a final answer
  • Identify and avoid waste within processes and operation to establish lean manufacturing
  • Level-out the workload in direct relation to the manpower requirements of each assembly step
  • Design the relationship between people, product, machines and material flow in accordance with ergonomic principles and human factors
  • Develop and maintain STW, build sequence, workloads, manpower requirements
  • Measure required process time using
  • MTM-UAS: Manage and coordinate all activities for technical changes on the shop-floor in the Assembly Shop
  • Investigate problems of technical changes. Coordinate and track dates for optimization
  • Monitor the work regulations and accident prevention regulations
  • Attend PV, 0.Serial, Press - vehicles, check the first parts in case of part changes
  • Providing instruction and guidance about required techniques and regulations
  • Arrange training for the employees
  • Bachelor’s degree in Business, Engineering or related field - Or - at least 4 years of comparable background/work experience that closely matches the role description
  • At least 3 years of automotive experience required
17

Body Process Engineering Specialist Resume Examples & Samples

  • Evaluate manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, tool aides and material; conferring with equipment vendors; while soliciting team members input
  • Improves manufacturing efficiency by analyzing and planning work flow, space requirement, and equipment layout
  • Assures product and process quality by auditing finished product and process capabilities; establishing standards; and confirming manufacturing processes
  • Provides manufacturing decision-making information by calculating production labor, and material costs; reviewing production schedules; estimating future requirements
  • Prepares product and process reports by collecting, analyzing, and summarizing information and trends
  • Provides manufacturing engineering information by answering questions and requests
  • Maintains product and company reputation by complying with government regulations
  • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and established procedures; requesting special service
  • Maintains product and process data base by writing computer programs; entering data
  • Strong Interpersonal and Leadership Skill
  • Critical Thinker and Active Listener
  • Able to multi-task and manage time efficiently
  • Microsoft Office: Excel, Access, and Powerpoint skills
18

Materials & Process Engineering Intern Resume Examples & Samples

  • Support the analysis, research, design and development of materials and their related fabrication and application processes
  • Assist in the creation of “Product Family Mappings” for product materials
  • Learn to work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions
  • Learn to apply principles of chemistry, physics and material behavior to develop metallic, non-metallic and composite material and processing specifications, fabrication and assembly processes
19

Process Engineering Professional Resume Examples & Samples

  • Developing and improving processes and equipment
  • Transferring new technology from research to development to high volume manufacturing
  • Ensuring quality controls, procedures, and processes are in place and fully documented
  • Working to continuously improve all areas of their processes/tools (including cost, process speed, defect levels, and impact on device performance) and quality controls
  • Must be fluent in English
  • One year of experience with vendor tool software, process control charts, and process characterization is preferred
  • One year of experience with related experience in thin films, metal deposition, or vacuum systems is preferred
  • One year of experience and basic knowledge of chemistry
  • One year of experience and basic knowledge of material science and engineering
20

Associate Engineering Manager of Process Engineering Resume Examples & Samples

  • Focus for this role will be on the Small and Large Stator Products
  • Perform process characterization and establish process controls for all critical process parameters using real-time SPC. Drive continuous improvement to ensure high throughput, low cost and improved lead-time
  • Responsible for diagnosing issues found during the Powertrain manufacturing process and driving corrective action back to the source through controlled 8D discipline
  • Perform process improvement for the manufacturing line on variety of mechanical, chemical and electrical processes. This includes: disposition of non-conforming material, leading a team to address out-of-control processes, driving yield improvement projects and qualifying new equipment and process
  • Be able to work in a collaborative and intensive environment
  • Analyze data from various Powertrain products to identify trends in manufacturing quality. Develop and modify test plans based on data analysis
  • Manage and motivate 1-2 engineers and 4 technicians and ensure they have the support they need to address day to day issues and out-of-control situations. This facility is 24x5
  • Improve cycle time, safety and ergo issues by initiating and leading cross functional projects
  • Some management experience ideal
  • Understanding of AC motor components and functionality is preferable
  • Understanding of electrical test steps (e.g. HiPot, Surge, Insulation Resistance) associated with stators is preferable
21

Process Engineering Intern Resume Examples & Samples

  • Define manufacturing process issues, collect data, establish facts and draw valid conclusions for the HD transition of legacy product
  • Create, updated and maintain concise and understandable documentation including but not limited to work instructions, reports, correspondence and procedure manuals for the HD transition of legacy product
  • Support the coordination and development of Process Engineering methodologies to manufacture HD products
  • Assist with the writing of Engineering Change Requests in Adept for HD component transition
  • All other duties or projects as assigned
  • The qualified candidate will be working towards a Bachelor’s degree in Industrial/Manufacturing/Mechanical Engineering or related field
  • Demonstrated ability to research, review and analyze and interpret scientific and technical documents, blueprints, from various sources
  • Strong customer service orientation; will interact with employees
  • Proficiency in Microsoft Office programs such as Excel, PowerPoint and Word, and related computer skills
22

Solutions & Process Engineering Manager Resume Examples & Samples

  • Broad technical understanding of technology infrastructure and operations
  • Excellent communication skills with ability to influence
  • Strong analytical skills, organization and decision making skills
  • Aggressive problem diagnosis
  • Minimum of 5-10 years business or technical experience
  • Proven track record in process improvement, managing controls and risk
  • SharePoint, Visio, MS Office (Project, Excel & PowerPoint – expert level)
23

Process Engineering Manager Resume Examples & Samples

  • Develop and maintain a value stream map for each assembly manufacturing process inside the facility
  • Utilize lean manufacturing principals to reduce inventory and develop single piece flow production systems
  • Support the Magna Exteriors Belvidere systems 5S implementation and assist in training employees on the 5S principals
  • Work with program management to ensure facility readiness for all new program launches
  • Develop requirements for new program launches consisting of process flow, estimated cycle times, required labor, error proofing systems and capital equipment to support
  • Review component and assembly designs to ensure the all products have been designed for assembly
  • Develop and obtain capital funding for required plant equipment, tools and programs
  • Responsible for creating and managing process core documents such as Control Plans, FMEA’s, Process Flows and Work Instructions
  • Implement error proofing systems to prevent errors in the manufacturing process and reduce FMEA RPN values
  • Continually improve the manufacturing process efficiencies to reduce production costs
  • Maintain all assembly owned CAD process layouts
  • Has ownership of Manufacturing Execution Systems in regards to supporting implementation, designing the flow, inputting work instructions, linking with acceptance criteria’s and testing the system
  • Manage purchase order documentation consistent with TS-16949 requirements. Create efficient paperwork systems that minimize manual paperwork
  • Responsible for leading the Quality Technician group and monitoring their daily tasks
  • Support the Lean Continuous Improvement Events with process engineers
  • Lead the assembly department in reviewing Lean Thinkers, verifying feasibility and driving change
  • Set departmental goals for the engineering team that align with the overall assembly departmental KPI targets
  • Provide performance feedback to all subordinates that allows them to grow within their position
  • Manage both salary and hourly team members following the principals of the Magna charter
  • A minimum of a bachelor degree in engineering or 5 years relevant work experience is required
  • A minimum of five years’ experience in an engineering and/or manufacturing environment is required
  • Proven history of successfully managing programs from quotation through launch phase
  • Must have a minimum of (2) years’ experience in the management of both salary and hourly team members
24

Data Driven Process Engineering Lead Resume Examples & Samples

  • Engage with the LOB Control Teams and CIB Central Support Program teams to identify control reporting needs. This includes metric identification, reporting views, report frequency, use and distribution
  • Assist in the development of new reporting solutions leveraging BI tools to support the reporting needs of the CIB LOB Control Teams and the CIB Central Support Program teams
  • Partner with the Control Room to coordinate end user training. Develop additional CIB specific training as needed
  • Integrate and normalize data from various sources in preparation of analysis
  • Gather information from various sources, synthesize the information, perform analysis, and interpret results
  • Investigate and resolve discrepancies to maintain data integrity of reporting
  • Deliver timely and accurate scheduled reporting (daily, weekly, monthly, quarterly)
  • Perform ongoing analysis of program related data and develops ad-hoc reports as requested to support business related programs and strategies
  • Maintain library of documents, templates, or other reusable knowledge assets
  • Maintain or update business intelligence tools, databases, dashboards, systems, or methods
  • Provide technical support for existing reports, dashboards, or other tools
  • Identify opportunities for process improvements and improvements of overall service delivery
  • May participate in project/program activities such as preparing data, creating documentation, and resolving data related issues
  • May prepare reports and make presentations on project performance, recommendations, or analytical results
  • Proficient analytical skills with a minimum of 5 years experience
  • Emerging analytical and problem solving skills with advance knowledge spreadsheets, database and presentation software, including MS Access, Excel, PowerPoint, and SharePoint
  • Intermediate SQL language skills (creating queries)
  • Strong interpersonal skills, including the ability to positively interact within all levels of the organization
  • Self-motivated and highly responsive with proven ability to take initiative and work successfully both independently and with a team
25

Process Engineering Intern Resume Examples & Samples

  • Spend time understanding the departments processes and coming up with ideas on how to improve them
  • Improving production process, tools, and interfaces
  • Help improve battery processes for the remanufacturing department
  • Occasionally improving and updating MI’s
  • Work alongside HV battery experts
26

Process Engineering Technician, Gigafactory Resume Examples & Samples

  • Support Lean Manufacturing and 5S initiatives
  • Work with Engineering and Manufacturing to ensure manufacturing instructions and qualification schedules are always available and current
  • Responsible for writing rework procedure and training associate on new processes
  • Manage repairs/troubleshooting exactly to instructed process
27

Senior Manager of Powertrain Process Engineering Resume Examples & Samples

  • Focus for this role will be on the Small and Large Drive Unit Products. Experience with motors and gears and automation is really critical to success in this role
  • Manage and motivate 2-3 engineers and 10 technicians and ensure they have the support they need to address day to day issues and out-of-control situations. This facility is 24x5
  • Partner with other organizations to roll out engineering changes in a timely and controlled fashion
  • Bachelors degree in Engineering or equivalent; Mechanical, Electrical or Chemical preferred; Computer Science also ok with Manufacturing experience
  • 5+ years of relevant experience in an Electronics Manufacturing Environment
28

Manager Process Engineering Resume Examples & Samples

  • Provides direct and ongoing leadership for an organization of multiple subordinate managers and individual contributors managing all aspects of the global engineering and product quality assurance relationship with key suppliers of external hardware, components, materials, or services for the development and manufacturing of product or service lines
  • Manages relationships with outsourced partners and suppliers, including setting expectations regarding deliverables, product quality, schedules, and costs; ensures that team members are effectively communicating and collaborating with outsourced resources
  • Minimum10 or more years of related work experience, including 5 or more years of people management experience
  • Experienced in managing human capital across geographies to drive workforce development and achieve desired results
  • Advanced communication skills catered to a wide variety of audiences. (e.g. written, verbal, presentation); mastery in English and local language
  • Advanced multi-tasking and prioritization skills
  • Strong understanding of the company's policies and processes
29

Special Process Engineering Lead Resume Examples & Samples

  • Supports the daily needs of the secondary operations area in terms of meeting the requirements for capacity, availability, quality standards and compliant documentation as part of the sustaining engineering function for cleaning, packaging, and finishing
  • Supports the strategic needs of the secondary operations area in terms of implementing new and improved processes and supporting new product introductions along with the necessary manufacturing equipment meeting the requirements for capacity, availability, quality standards and compliant documentation as part of the project engineering function for the above mentioned secondary operations processes
  • Owns activities related to cleaning, finishing, and packaging strategy definition, solution identification, development, and introduction as a service center for the site
  • Assists in planning for as well as schedules and manages the special process engineering project and capital portfolio ensuring all initiatives adhere to good engineering and documentation practices, are appropriately staffed, are run within budget, and are aligned with prioritization and strategy on a site and cluster level
  • Assists in overall department strategy development outlining technological, organizational and cross-functional needs in alignment with site and cluster level strategic goals, technological guidelines, and organizational models
  • May own and lead cross-functional focus strategy development and related implementation activities (e.g. Packaging Strategy, Finishing Strategy, etc.)
  • Plans and directs overall engineering activities and oversees technical execution of projects related to the special process engineering team in support of the secondary operations areas for existing processes and activities related to new product introductions
  • Assists with his teams in troubleshooting day-to-day problems, discrepancies, and investigations of non-conformances
  • Ensures adherence to the relevant safety requirements for equipment and processes and define, coordinate, and execute corrective actions involving the relevant internal and external resources
  • Assists in the development of capital investment plans for the business considering strategic needs, improvements and innovations, driving cost improvements while meeting capacity needs
  • Supports the development of SOP's, Work Instruction, and other control processes or practices as it pertains to the area of responsibility
  • Ensures adequate documentation, project management and capturing of lessons learned for projects within the team using standardized templates and/or appropriate software applications
  • Plans, conducts, and coordinates activities related to the development of new or improved processes and systems including researching current and emerging technologies, evaluating process cost, quality, and capability alternatives
  • Ensures utilization of appropriate engineering principles and standard strategies as e.g. Lean and 5S principles when implementing improvements of existing manufacturing processes
  • Ensures adequate and consistent development of user requirement specifications for new equipment and processes for new capital projects using standard templates following applicable HSE and legal requirements
  • Ensures consistent development and review of business cases and financial justification for all CIP and capital investment projects in adherence to internal, franchise, and J&J requirements
  • Ensures cycle times of the manufacturing processes are correctly determined as a basis for the development of process improvements and the implementation of improved technologies
  • Ensures adherence to GxP principles in the development of tooling, fixturing and machining solutions in order to provide cost effective solutions and a safe working environment
  • Ensures efficient utilization of human and other natural and technical resources when defining new technical solutions to offset generally increasing cost
  • Ensures adherence to applicable risk management practices when introducing new products and/or processes
  • Assists with and follows up on addressing internal and external audit findings making sure open action items are given appropriate priority and are addressed as needed
  • May act as a technical reference or lead special projects in individual areas of expertise as needed
  • Bachelor’s Degree is required
  • A minimum of 6 years of overall working experience in a technical field is required
  • A minimum of 3 years of experience in a manufacturing engineering environment is required; experience in a CNC based manufacturing environment is preferred
  • Proven history of continuous improvement & successful project completion is preferred
  • Prior project management experience and experience in leading people in a project management setting is required
  • Previous experience leading or managing others is preferred
  • Previous experience within the Healthcare/Medical Devices/or Highly Regulated Environment is required
  • Experience with automation, advanced inspection or vision system based applications is preferred
  • CAPA, risk assessment, and process validation experience is preferred
  • Must be willing to support global projects including some international travel
  • Works and communicates with others in a team environment
  • Participates in and understands all compliance related activities pertaining to the job assignment
  • Follows all laws and policies as they apply to one's job and maintains the highest levels of professionalism, ethics and compliance at all times
  • Follows appropriate safety practices in order to prevent accidents to self or others
  • Works in conditions that may be hot, cold, wet and/or noisy along with exposure to fumes, oil, coolants and other manufacturing related chemicals
  • Demonstrates history of positive interpersonal skills showing courtesy, tact, and understanding in interactions with coworkers, even under stressful circumstances
  • This position is located in Elmira, NY and may require up to 15% domestic/international travel.Process Engineering
30

Dairy Process Engineering Specialist Resume Examples & Samples

  • Develop, validate and implement global standards for hygienic wet processing, dissolving, heat treatment and UHT applications
  • Provide detailed engineering support for wet processing, dissolving, heat treatment and UHT applications from the design to the start-up phase for major Capital Investment Projects
  • Support the development and implementation of process control systems for wet processing, dissolving, heat treatment and UHT applications
  • Drive as R&D project leader the engineering support for major Capital Investment Projects and ensure the communication with local project teams and key stakeholders
  • Share the expert knowledge on hygienic wet processing, dissolving and UHT in trainings
  • Master Degree in chemical / mechanical / thermal engineering
  • Minimum 5 years of experience as process engineering specialist in the food, beverage or dairy industry
  • Expert knowledge on separation, homogenization, wet processing, dissolving, thermal heat treatment and UHT
  • Extended knowledge on CIP systems, hygienic engineering, GMP of food industry and project management experience
  • Extended knowledge on process and machine safety including CE certification
  • Fluent in English, German or French would be an asset
31

Thermal Process Engineering Specialist Resume Examples & Samples

  • Develop, validate and implement global standards for evaporator (TVR / MVR)
  • Develop, validate and implement global standards for UHT and aseptic applications
  • Provide detailed engineering support for evaporator, UHT and aseptic applications from the design to the start-up phase for major Capital Investment Projects in the market
  • Support the development and implementation of process control systems for evaporator, UHT and aseptic applications
  • Manage as key contact person the collaboration with our key suppliers for evaporator
  • Share the expert knowledge on thermal processing and evaporation in trainings
  • Master Degree in chemical mechanical or thermal engineering
  • Expert knowledge on evaporation, UHT and aseptic processing, good knowledge of project management
  • Knowledge on CIP systems, hygienic engineering, GMP of food industry
  • Strong analytical and conceptual thinking skills
32

Engineering Internship With Gillette Process & Engineering Resume Examples & Samples

  • Demonstrate your team working, management and project engineering skills
  • Experience the working environment in a leading international company
  • Gain guidance on your professional development
33

Process Engineering Co-op-spring Resume Examples & Samples

  • The optimization and troubleshooting of manufacturing processes and product formulation
  • The support of the growth and innovation efforts and the new product development process
  • The commercialization (development and implementation) of manufacturing processes for new products
  • The specification, purchase, installation and commissioning of process equipment and systems
34

Co-op, Process Engineering Resume Examples & Samples

  • Developing design concepts, capital estimates & functional specifications for potential capital projects
  • Specification, purchase, installation and commissioning of process equipment and systems
  • Designing and troubleshooting of manufacturing processes
  • On-site construction & Project Coordination and Project Management
35

Head of Process Engineering Resume Examples & Samples

  • To keep the business up to date with current innovations and trends in process. developments within the Industry
  • Support project teams with innovative designs
  • Liaison with other AECOM business lines and geographies in order to improve efficiency and inter-company work sharing
  • Advise business regarding the acceptability of proposed process guarantees
  • Line management of all Process Engineers within the Water business line
  • Review all water and wastewater process designs within the business to ensure they are being correctly developed
  • Advise the business and project teams of risks within designs and guarantees
  • Train and development of Process Engineers
36

Process Engineering Management Resume Examples & Samples

  • P.E. Registration is required
  • Minimum 20 years experience in Downstream Refinery Projects
  • Experience working in EPC and EPCM environment on oil, gas and chemical projects
  • Knowledgeable with HYSYS and/or ProVision simulation software
  • Knowledgeable of industry and regulated standards and design criteria
  • Expert knowledge of systems, calculations, equipment, application of methods, PFD, P&ID, Plant layout, materials, and computer based process engineering calculations
37

Intermediate Process Engineering Specialist Resume Examples & Samples

  • Conceptual design of pharmaceutical processes and clean utilities
  • Writing documentation to create specifications and tender documents
  • Producing P&ID and Layout drawings
  • Working knowledge of cGMPs
  • Commissioning of process and mechanical systems
  • Holding client and supplier meetings
38

Manager Process Engineering Resume Examples & Samples

  • Builds & maintains an understanding of the process technology needs & capabilities across Conagra, especially in the frozen & refrigerated platforms. Partners internally and externally (Universities, suppliers, competitive scouting) to identify technologies that can be adapted for our needs
  • Coaches and leads a team of ~3-5 direct reports. Shows a passion for developing talent, maximizing performance, and career growth for the group as a whole
  • Creates & fosters a food culture – valuing broadmindedness, creativity, curiosity, & decision-making
  • Acts as “the face” of the process engineering team to stakeholders & team members across the frozen & refrigerated business unit. Is able to effectively stakeholders across the organization. Drives discussion on effective resource allocation to the right projects
  • Collaborates with key stakeholders across the organization to represent process engineering, aligning the work with business needs for programs such as: quality & food safety improvement, productivity & cost initiatives, network optimization efforts, commercialization of new items, and capacity expansions
  • Bachelors of Science Degree in Chemical, Food, Biochemical, or Mechanical Engineering
  • 3+ years of experience effectively influencing across business partners and stakeholders
  • 2+ years of experience managing, mentoring, or coaching technical professionals
  • Extensive knowledge of food science & food processing
  • Background in frozen food or extended shelf life dairy & refrigerated foods and related processing desired, but not absolutely required
39

Process Engineering Manager Resume Examples & Samples

  • Implements the process strategy developed by the Process Owner or their representative ensuring that future state designs align with target metrics, process design principles and control requirements
  • Identifies process engineering opportunities and engages with relevant stakeholders to get their buy-in. Scopes, plans, resources and tracks large scale process improvement initiatives to ensure desired outcomes are achieved in time and on budget
  • Interfaces with project sponsors to ensure appropriate direction and stakeholder management
  • Conducts sponsor and process interviews to assess opportunities for process optimisation
  • Coaches direct /indirect reports and programme contributors on process engineering and programme delivery best practice. Develops and provides guidance on relevant investigative approaches, tools and techniques, mentoring and developing resources in the learning and application of key tools and techniques
  • Ensures delivery of programme in line with best practice and mandated Bank standards
  • Ensures programmes are adequately resourced with the right skills prior to project launch. Conducts frequent reviews to ensure delivery to the highest possible standards
  • Defines, builds and implements appropriate process awareness and optimisation training, adapting where necessary to meet specific business requirements, including, identifying the target audience, defining the methods, the success criteria and managing roll-out, utilising latest thinking and innovative process optimisation techniques
  • Ensures sustainability through the update of the Enterprise Process Model, process performance metrics, control frameworks, embedding of required behavioural changes and updates to people performance metrics where appropriate
  • Promotes process thinking across the bank
  • Extensive experience in the use of Six Sigma and Lean methodologies, leading several large scale (cross divisional/multiple geographies) projects
  • Excellent problem-solving skills. Ability to analyse business issues, causes and consequences, and develop strategies and solutions that drive lasting change
  • Deep knowledge of market leading process optimisation techniques
  • Experience in designing and delivering large process training/ education programmes
  • Demonstrated experience in Programme and Project Management of large scale (cross divisional/multiple geographies) projects
  • Demonstrated ability in creative and innovative thinking
  • Demonstrated ability in leading and managing virtual, global team in a matrix organisation, ensuring effective knowledge transfer and developing capability of team members
40

Drive Process Engineering Resume Examples & Samples

  • Assists the Engineering Manager or Sr Engineer as assigned, with the research, development, testing, and data analyst as assigned
  • Assign to work on the responsible project within the time frame and update the progress regularly
  • Learns and becomes proficient in engineering role at Seagate
  • Maintains a clean and professional office and work area environment
  • Maintains high standard professionalism in attitudes and communication with fellow
  • Bachelor's Degree in Electrical/Electronics/Mechanical/Industrial/Computer Engineering or related fields
  • Self-motivated, independent and a team player with strong analytical and debugging skills
  • Passionate on participating into the Internship Program for 2-4 months based on the project requirements
41

Process Engineering Manager Resume Examples & Samples

  • Provides technical and management direction to the PD group by making sound decisions based on facts and balancing them with performance, schedule, and cost
  • Responsible for the departmental basics including budgeting, hiring, day-to-day management, project resourcing, etc
  • Partner with cross functional and cross site groups, including R&D and Operations, to develop, execute and manage the PD strategies and goals that are aligned with the overall business goals
  • Maintains a high level of communication between multiple funtions and development sites. Plans and coordinates development efforts between those functions and sites, including effective receipt/transfer of technology
  • Supports teamwork and staff development through a commitment to mentoring and technical leadership. Demonstrates thorough knowledge of manufacturing impact on product performance as perceived by the customer
  • Is acknowledged as a subject matter expert in a relevant technical field and influences associated site-wide technology planning. Is a significant contributor to operational performance improvement through identification and implementation of major CIP’S, application of advanced problem
  • Performs pioneering engineering work as part of major programs. Defines the strategic impact of alternative technologies in the context of the Site Long-Range Plan
  • Works with EHS to identify significant environmental impacts of Boston Scientific operations and to establish goals and targets around significant environmental impacts
  • Ensures all direct reports are aware of their commitment to patient safety and product quality, are current with their training requirements and that they understand and comply with all other regulations governing their work
  • Demonstrate a primary commitment to patient safety and product quality
  • Establishes and supports a work environment of continuous improvement that supports BSC’s Quality policy, Quality System & the appropriate regulations for the area
  • Bachelors degree (HETAC level 8) in engineering or equivalent
  • Minimum 8-10yrs of technical/professional experience
  • A proven track record in managing professionals with advanced engineering background
  • Is an influential Leader, fully motivated to achieve and demonstrate best practices in line with the Department and Site/Corporate objectives
  • Medical device industry experience is ideally required in New Product Development
42

Senior Process Engineering Manager Resume Examples & Samples

  • Certified Lean Six Sigma specialist / Master Black Belt Six Sigma
  • Minimum of 12 – 15 years of work experience, with last 3 – 5 years in senior management roles
  • A degree in industrial/mechanical engineering, with minimum 2 – 3 years of Industrial engineering experience
  • Direct responsibility included delivery of large scale projects focusing on operational process improvement and/or service design
  • Design Thinking / Lean Manufacturing / Value Stream Mapping / Statistical Data Analysis / Value Proposition
  • Experience in enterprise wide change management
  • Excellent communication & presentation skills across multiple audiences in organization
  • Ability to own entire process excellence program/project, starting from idea generation to implementation
  • Highly motivated, enthusiastic, results driven and ability to influence senior management stakeholders
  • Strong proficiency with Visio, Minitab, Microsoft Office, specifically MS Project, Excel, and PowerPoint required
  • Ability to work in a fast paced matrix environment including across multiple geographies, functions & organizations often outside ‘standard’ working hours
  • Background in corporate travel operations
  • Certification in PMI / Prince2 / Agile Methodology
  • Industry knowledge : Contact Centre / Consulting
43

Process Engineering Manager Resume Examples & Samples

  • Defines and documents assembly processes as related to production of customer products
  • Performs process engineering reviews of design documentation for compliance with stated requirements and DFM (Design for Manufacturability) potential
  • Applies statistical process control (SPC) methods for analyzing data to evaluate the current process and process changes
  • Establishes and updates procedures that will properly entail the assembly of products
  • Assigns and directs technical and administrative personnel engaged in Process Engineering activities
  • Conducts and/or supervises studies to determine cause, effect, and corrective measures to remedy deviations from established Quality Standards
  • Collects/reviews process data to ensure consistency with company and/or customer requirements
  • Provides technical assistance to electrical engineering n the development of test equipment and gauges
  • Responsible for equipment specification, purchase, and maintenance
  • Responsible for all materials evaluations and qualifications (solder pasts, epoxies, flux, solvents)
  • Responsible for the implementation, utilization, and maintenance of all calibration equipment
  • Supports new product development activities for both products and processes
  • Prepares charts, graphs, and diagrams to illustrate workflow, routing, floor layouts, material handling, and machine utilization
  • Conducts customer and supplier visitations as required
  • Bachelor of Science in an Engineering discipline AND
  • Ten (10) years of electronics related assembly experience OR
  • Microsoft Office (Outlook, Word, Excel, PowerPoint, Project, Visio, etc.); Web proficiency
44

Process Engineering Intern Resume Examples & Samples

  • Litho scanner, track, process integration and litho metrology
  • Diffusion, implant, RTA, CVD, PVD, Cu plating, CMP, Thin Film Metrology, defect metrology equipment, and wafer handling equipment
  • Wet clean/etch and plasma etch/ash
  • 3 days one week, at least 6 months
45

Process Engineering Manager Resume Examples & Samples

  • Responsible for delivering large and/or multiple projects, on time, within budget and to agreed specifications and providing effective, skilled project management to help reduce the costs of delivering projects and adding value to the business by applying proven project management techniques
  • Leads team in the development of master project plans to accomplish project commitments and timing
  • Establishes appropriate metrics for measuring key project criteria
  • Functions as a team lead for projects including acting as the liaison to internal departments as needed
  • Manages large and often multiple projects and participates in corporate initiatives to assist in meeting the company's goals
  • Ensures that project deliverables satisfy project requirements
  • Assesses project requirements, while developing and recommending a sound approach or application to meet the needs of the project and client
  • Facilitates the creation of communication plans, ensuring that appropriate information is exchanged among key stakeholders, and conducts status review meetings among project team members and clients
  • Manages and enhances project quality by providing ideas and suggestions to the team aimed at improving the effectiveness of their role, and of the project activities in general
  • Determines, monitors and reviews costs, operational budgets, schedules and staffing requirements for project teams
  • Plan, organize and staff key field positions
  • Mentors and trains clients, vendors and team members in project management methods, procedures and activities
  • Bachelor in Engineering in Chemical, Process or Mechanical. master degree is preferable
  • 20+ years of related experience
  • Professional Registration (P.E.) or Registered Architect (RA) is required
  • Strong working knowledge of pre-design and pre-construction, building systems/components and technology, contract management, project delivery methods, team building and client relationship building required
46

Process Engineering Manager Resume Examples & Samples

  • Lead various types of business transformation initiatives including but not limited to VLSS Process Improvement and Design projects
  • Provide active and aggressive leadership on key projects designed to increase revenue, reduce expenses, and improve customer experience
  • Facilitate team meetings, cross-functional workshops and VLSS Work-outs
  • Act as an effective change agent utilizing proper stakeholder analysis and change management techniques
  • Provide management with updates on project status, key metrics, issues, and risks
  • Maintain accurate and thorough project documentation/record keeping
  • Support others by providing just in time coaching on business transformation methodologies and tools
  • Be a liaison between business units on projects that have a multi-organization or business unit scope
  • 4-year degree required in engineering, business, enterprise sales or technical discipline
  • MBA highly desired, or advanced university degree
  • 5-10+ years total experience
  • VLSS Black Belt or Green Belt Certification a plus
  • Agile and/or Digitization experience preferred
  • Ability to drive results at all levels, regardless of reporting structures
  • Proven record for managing multiple simultaneous projects on time and budget
  • Experience creating and presenting presentations to all levels of an organization
  • Outstanding quantitative and analytical skills
  • A focus on process and the customer experience
  • Proven record of performance and trusted professional credibility
  • Experienced team leader with proven facilitation, change management, and problem solving experience
  • Comfort in working up and across the organization – working with senior staff members and front line employees
  • Demonstrated competency in strategic thinking that results in new ideas that drive the business forward
  • Track record of handling extremely confidential information appropriately
47

Process Engineering Padawan Resume Examples & Samples

  • Assist with design and execution of laboratory and pilot scale experiments leading to definition of commercially viable process leveraging Ginkgo's engineered organisms
  • Perform bench scale assays and proof-of-concept experiments
  • Research and summarize relevant topics for active work streams
48

Process Engineering Technician Resume Examples & Samples

  • Assist Process and Product Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to yield, quality and throughput
  • Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results
  • Recommend and help implement improvements in a production environment to meet production goals across multiple operations and technologies
  • Participate in equipment and process validation execution, data collection and summaries
  • Work with Engineering, Manufacturing and Quality teams to develop processes for new products and improve processes of existing products
  • Support definition of technical requirements procedures for Production to process product
49

Senior Director, Process Engineering Resume Examples & Samples

  • Lead a high-performance team that will support IPD’s process engineering functions, including fermentation, downstream operations, site location, environmental permits and ECC partners
  • Guide current fermentation and process development by drawing on previous experience with industrial product production
  • Work in partnership with other IPD teams (molecular biology, bio analytics, scientific computing, fermentation etc.) to advance projects
  • Where appropriate collaborate with external research and commercial partners to support externally funded projects and technology transfer
  • Seek and qualify new technologies and techniques that will further advance/enable project goals
  • Propose continual process improvements for efficiency and quality
  • Prepare technical reports and make clear and succinct scientific presentations that can be shared and transferred to and from cross-functional teams
  • Contribute to the development of new project concepts
  • Be a conscientious laboratory citizen, adhere to EH&S standards, set positive standards
  • Ensure relevant safety protocols and instructions are readily available and strictly adhered to
  • Implement appropriate time management and delegation techniques in order to successfully manage a dynamic scientific team while devoting time for individual scientific contributions
  • Identify needs and recruit key scientific talent to staff different projects currently in process
  • Provide leadership, drive change, and execute on the company’s mission and core values
  • Cross-train and coach staff to maintain an efficient, lean, and knowledgeable team
  • Create a weekly and daily schedule for the team; coordinate individual and team work assignments that foster innovation and produce results
  • Create SMART (specific, measurable, attainable, relevant, and time-bound) metrics for the team to follow and monitor their advancement on projects under rapidly shifting priorities and timelines
  • PhD, MS or BS in chemical engineering, bioengineering, mechanical engineering or other similar discipline
  • PhD, 7+ years; MS, 10+ years; BS, 15+ years’ experience with a proven track record of accomplishments, preferably in bio-industrial, or life sciences
  • Experience in industrial fermentations
  • Experience with process development of fermentation and downstream processes
  • Experience in managing capital projects in excess of $5 million
  • Proven ability to assemble and manage a dynamic team and meet/exceed corporate objectives and aggressive timelines
  • Understand and execute on the company’s mission and values of honesty, loyalty, diligence and intelligence
  • Have a sense of urgency, determination and confidence that our mission is great
  • High degree of ethical standard, trustworthiness, accuracy and attention to detail
  • Capable of fostering change and to deal with conflict in a direct, positive manner
  • Achieve goals through delegation to team members and implementation of group projects
  • Ability to think and adapt to a rapidly changing environment
  • Reach rational conclusions through complex processing of information
  • Foster innovation through creative solutions and constructive dialog
  • Well organized, a clear communicator in both oral and written forms and through technology
  • Up-to-date knowledge on industry current events
  • Energized by accomplishments and excellence in the workplace
50

Associate Director, Process Engineering Resume Examples & Samples

  • Lead capital projects from the design perspective
  • Lead and support technology transfer within the company and to partners
  • Travel is required at a minimum of 25% of the time
  • Experience with process monitoring, data capture, and process trending; including control charting and statistical process control
  • Manage direct reports with a focus on high quality internal and external customer service and talent and career development
  • Prepare and provide support for department budgets and capital projects
  • Justifies the need for resources and ensures that all Process Engineering activities are prioritized in accordance with Pacira’s strategical and tactical plan
  • Direct all equipment related investigations and troubleshooting of Manufacturing Equipment to identify root causes during start-up. Implement solutions
  • Participate in cross functional teams dedicated to process improvement, efficiency, and optimization
  • Ensure all mandatory training requirements are met for the team
  • Support GMP audits from regulatory agencies as well as internal audits
  • Minimum 10 years of Management Experience
  • Minimum 15 years of relevant cGMP and technical experience
  • BS degree in Engineering Must have management experience
  • Must be results oriented
  • Ability to work and comply with cGMP requirements
  • Team Player attitude: The willingness to work with peers towards company and department goals with dedication and willingness to do what is necessary to get the job done well and on time
51

Manager Process Engineering Resume Examples & Samples

  • Interpreting process and manufacturing requirements developed by Manufacturing Technology (15%)
  • Review process flow diagrams, mass balances and process descriptions including crtical parameters provided by Manufacturing technology. Determine thoroughness to proceed with engineering design. Responsible to understand the process requirements and how they impact the equipment design
  • Design Development and specifications (30%)
  • Responsible for developing preliminary and basic engineering deliverables that meet URS and compliance requirements including best practices guidelines. Depending on project, some deliverables may be generated internally while other times by external engineering. Accountable for technical quality of design. Perform appropriate reviews with stakeholders. Make sure engineering contractor calculations are correct and review vendor designs for adherence to specififcation. Participate in PTI reviews. Responsible for design that meets project budget and schedule
  • Commissioning and qualification (30%)
  • Lead C&Q execution for accountable systems. Participate in SLA and FCCA. Review C&Q test plans for technical content. Support mechancial completion and start-up. Participate and lead FAT and Critical test plan execution
  • Technical engineering support to manufacturing sites (15%)
  • Provide technical guidance to site engineering teams upon request. Apply lessons learned from other sites to help with trouble shooting, design issues and testing specifics. Responsible to understand site specific standards and procedures
  • Participate in global networks (10%)
  • Contribute lessons learned to the network. Participate in global initiatives when requested. Responsible to understand current global design guidelines and application
  • Regional responsibility. No budget responsibilities. May manage several contractors and be responsible for accuracy of timesheets and quality of work
  • Key dimensions: headcount (direct and indirect) budget,doses, Capex… - Key indicators on which the job holder will be evaluated
  • Engineer will support CAPEX funded projects for large strategic projects and bundled site projects. Performance is primarily based on ability to meet requirements of project execution and work effectively on multi functional teams
  • B.S., Chemical Engineering
  • 5 years of experience in applied process design engineering and project experience are required - this includes experience with
  • Experience in equipment start-up, qualification and/or validation
  • Ability to work effectively on a team
  • Customer commitment (meet commitments)
52

Manager, Process Engineering Resume Examples & Samples

  • Utilizing and maintaining robust scale down models to support manufacturing operations
  • Manage a group of engineers/scientists that provide scientific/technical support, expertise and guidance to Manufacturing and Quality in the areas of Protein Purification Operations and Formulation
  • Keep abreast of new developments/technologies in areas of responsibility
  • Support ongoing development of staff to maximize individual and team performance. Serve as coach/mentor to staff
  • Support documentation preparation for regulatory purposes and stay current on regulatory requirements that have impact on manufacturing processes and evaluate/implement changes if required
  • Provide CMC support and guidance for product life cycle management
  • BS in engineering or related field with at least 11+ years, or MS in engineering or related field with at least 9+ years, or PhD with 7+ relevant experience in a cGMP manufacturing environment
  • In -depth understanding of large scale biotechnology unit operations, principles of SIP and CIP, and principles of biochemical engineering, and process data analysis
  • Demonstrated ability to lead technical projects and small teams is a must
  • Experience managing technical teams
  • Knowledge of biotechnology processes/concepts/techniques and engineering principles
  • Experience evaluating and implementing new technologies/techniques
  • Knowledge of CGMP requirements in a regulated environment
  • Experience managing people and projects
  • Experience with facilitation. #LI-GZ
53

Credit Process Engineering Resume Examples & Samples

  • Developing and overseeing the implementation of the process strategy, ensuring that future state designs align with target metrics, process design principles and control requirements
  • Identifying process engineering opportunities and engaging with relevant stakeholders, to get their buy-in
  • Scoping, planning, resourcing and tracking large scale process improvement initiatives, to ensure desired outcomes are achieved in time and on budget
  • Managing a pool of projects and taking responsibility for the delivery of smaller, medium size and large scale process optimisation programmes
  • Contributing to building the Bank’s capability in change, process optimisation and process thinking by leading training and development initiatives and coaching colleagues and cross-functional teams on best practice/trends in process improvement
  • Acting as catalyst for change by creating awareness and influencing relevant Stakeholders to champion the change initiatives
  • Interfacing with Project Sponsors to ensure appropriate direction and stakeholder management
  • Conducting sponsor and process interviews to assess opportunities for process optimisation
  • Coaching Project team Members, direct & indirect Reports and Programme Contributors on process engineering and programme delivery best practice
  • Developing and providing guidance on relevant investigative approaches, tools and techniques
  • Mentoring and developing Resources in the learning and application of key tools and techniques
  • Ensuring the delivery of the programme in line with best practice and mandated Bank standards
  • Ensuring programmes are adequately resourced with the right skills prior to project launch
  • Conducting frequent reviews to ensure delivery to the highest possible standards
  • Defining, building and implementing appropriate process awareness and optimisation training, adapting where necessary to meet specific business requirements
  • Ensuring sustainability through update’s to the credit risk’s process model, process performance metrics, control frameworks, embedding of required behavioural changes and updates to people performance metrics where appropriate
  • Promoting progressive process thinking across the bank
  • Excellent problem-solving skills, with the ability to analyse business issues, causes and consequences, and develop strategies and solutions that drive lasting change
  • A deep knowledge of market leading process optimisation techniques
  • Experience in designing and delivering large process training/education programmes
  • Demonstrated experience in programme and project management of large scale (cross divisional/multiple geographies) projects
  • A demonstrable ability in creative and innovative thinking
  • Excellent interpersonal, communication, team work, networking, planning and presentation skills
  • Experience in vendor/third party management
  • Demonstrable ability in leading and managing virtual, global team in a matrix organisation, ensuring effective knowledge transfer and developing the capability of team members
  • Bachelors degree (or equivalent) from an accredited college or university, or the equivalent experience
  • Recognised professional qualifications e.g. Lean, Six Sigma or Lean Six Sigma
  • Qualification in project management (beneficial)
54

Process Engineering Engineer Resume Examples & Samples

  • You have a doctorate in process engineering, chemical engineering or technical chemistry, on which you earned above-average marks, and have several years of professional experience
  • You combine a passion for innovation with in-depth knowledge of computational fluid dynamics (CFD) and reaction technology
  • In addition, you have practical experience in modeling and simulation of complex chemical processes using OpenFoam, Predici or similar software as well as excellent IT skills, e.g. in C/C++ and Linux
55

Process Engineering Engineer Resume Examples & Samples

  • You have a degree in process engineering or chemical engineering, on which you earned above-average results, and have gone on to earn a doctorate
  • You have knowledge and skills in the field of agglomeration or mixing of solids and initial experience with solids
  • You are distinguished by a high level of interest in innovations and by willingness to contribute within the team in order to achieve successes together
  • At the same time, you are able to present complex issues in an understandable way and to communicate persuasively in both German and English
56

Process Engineering Intern Resume Examples & Samples

  • Develop equipment set ups, documentation, equipment / material interface, and continuous improvement through learning and engineering project management process
  • Lead and manage projects in optimization of packaging equipment and systems related to the metal can manufacturing production lines
  • Work on engineering teams to identify issues, collect appropriate supporting data, develop and present improvement ideas, and implement solutions
  • Develop standardized work, time studies, equipment capability and repeatability studies
  • Develop critical parameters for equipment and systems and develop standard set up documentation
  • Develop and maintains relationship and communications between engineers and production workers
  • Assist Project leaders with communicating with cross functional teams
  • Assist with developing project scope of work
  • Communicate projects with all plant departments
  • Ensure timelines for projects are created and published. Work with Project Leaders to ensure timelines are continually updated and communicated
  • Ensure all issues and barriers regarding projects are communicated with all departments and solutions are found
  • Team boundaries Identified and guidelines put in place
  • Ensure communication from Project leaders are provided to the floor associates
  • Must be proficient in Windows programs and Microsoft Office
  • Assist with managing workflow to ensure project management elements are tracked and executed in support of prescribed timelines
  • Other duties as assigned by manager
57

Mems Process Engineering Manager Resume Examples & Samples

  • Provide technical management of overseas MEMS wafer foundries, drive capability improvements, resolve issues and execute on new development projects
  • Work with internal assembly development and factory teams to improve capabilities required to enable future product road maps
  • Support design and analysis of DOE's to effectively test risks and process corners to ensure margin for high volume applications
  • Contribute ideas for new processes and improvements to MEMS technologies and processing
  • Develop techniques and strategies for analyzing large data sets to determine correlations between in-line metrics and final system performance
  • Drive technical innovation and generate IP filings
  • Develop resource and staffing plans to support NPI projects
  • Recommend and drive efficiency initiatives
  • Work independently and collaboratively
58

Process Engineering Technician Resume Examples & Samples

  • Assist and support Process Engineers in the
  • Experience in Engineering technical disciplines
  • Advanced reading, writing and math skills
  • Advanced PC skills, including training and knowledge of Jabil’s software packages
  • Ability to read blueprints, mylars, drawings, and/or generate visual aids, layouts and tooling documentation utilizing CAD tools
  • Understanding of Jabil’s production process; ability to use complex measurement tools
  • Excellent interpersonal, communication, and problem-solving skills are required
  • Ability to work under pressure with frequently-changing deadlines and priorities is critical
  • Jabil certification in Quality Control and Machine Operation required
59

Process Engineering Technical Manager Resume Examples & Samples

  • Manage a team of Assembly/Process Engineers to execute program requirements in the production Engine Delivery Center (Multiple Assembly Sites)
  • Align Assembly Engineering resources with projects that support key business initiatives: Work Instruction Legacy IT into Solumina G7, Lean transformation
  • Promote the use of data driven root cause and corrective action tool usage to support On-Time production CAR (Corrective Action Request) closure and the Engine Centers journey toward ACE Gold status
  • Support all EH&S (Environment, Health & Safety) initiatives (PRA, Work-Fit, Ergo) by driving safe processes across all production product lines
  • Effectively manage the Assembly/Process Engineering support budget
  • Implement and execute engineering changes to ensure customer requirements are met and build commitments are achieved
  • Develop, plan, & implement capital requirements to support productivity improvements, technology insertion and capacity for future programs
  • Continue to ensure production readiness for JSF and NGPF product lines as they move into high production ramp-up across all production assembly sites
  • Lead/Participate in Employee Engagement initiatives and activities demonstrated through diverse work groups as part of the Engine Centers Leadership Team
  • Drive product cost reduction and ensure War on Cost targets are achieved through process improvements and deployment of new technologies
60

Process Engineering Intern Resume Examples & Samples

  • Performs work which involves conventional engineering practice
  • Work requires a general knowledge of Engineering and general knowledge of practices of related specialties
  • Prepares plan and detail P&ID drawings using manual and CAD methods
  • Uses accepted formulas and manuals in making necessary computations to determine system and component sizes in simple process systems
  • Works in close support with the design originator and may recommend minor design changes
  • May make field surveys and measurements of existing installations
  • Performs other duties as directed by supervisor
  • Candidate must be currently enrolled as a junior or higher within an accredited Chemical Engineering program
  • Minimum GPA of 3.0 or higher required
  • Knowledge of AutoCAD, Work, Excel and Access preferred
  • Excellent oral and written communication skills, decision making capabilities, problem resolution skills, and a sense of initiative are important
61

Drive Process Engineering Resume Examples & Samples

  • Computer Engineer
  • Database language knowledge, Oracle
  • Web application knowledge
  • Knowledge of C/C++, MySQL, html
62

Hgsa Process Engineering Resume Examples & Samples

  • Good interpersonel skill
  • Good analytical skill
  • Microsoft Office & Basic Programing
63

Quality & Process Engineering Manager^ Resume Examples & Samples

  • B.S. in Material Science Engineering, Manufacturing Engineering or Mechanical Engineering from an accredited institution
  • 10 years experience in Manufacturing; Quality Systems,
  • Financial Accounting and Planning & Logistics/Supply Chain knowledge
  • CATIA and NADCAP processes knowledge
  • NADCAP Special Process Certification experience
  • Working knowledge of new product qualification and validation requirements for Aerospace companies
  • Experience with and development of work process flow and control plans
  • Experience with 8D or other RCCA tools
  • M.S. is preferred
64

Process Engineering Associate Resume Examples & Samples

  • Associates or Bachelor's degree in mechanical, chemical, or related field of study strongly preferred
  • 3-5 years technical / mechanical experience in a manufacturing environment
  • Develop innovative solutions for process issues
  • Ability to champion and manage projects
  • Self directed individual and results oriented
  • Experience supporting formal problem solving methods
  • Ability to communicate well with all levels of the organization
  • Ability to interface with cross functional teams to solve problems, define and execute overall requirements
  • Experienced in working with team based organization
  • Ability to work effectively with customers
  • Experience working in ISO certification organization
65

Process Engineering Manager Resume Examples & Samples

  • Management, mentoring, and leadership of Process Engineering direct reports
  • Responsible for delivery of cost savings from continuous improvement and Lean initiatives
  • Assists maintenance group in identification and elimination of root causes of recurring issues
  • Sets standards for reliability and continuous improvement of equipment
  • Recommends new equipment and/or preventative techniques to improve reliability
  • Provides PLC (program logic controls) installation, programming, and troubleshooting expertise
  • Recommend, submit, and management of all capital projects
  • Manages and approves work performed by outside contractors
  • Manages department and project budget
  • Minimum 5-8 years Process Engineering or Process Engineering Management experience
  • Management of Engineers a plus
  • Ability to troubleshoot, amend, and write PLC logic a plus
  • Must effectively communicate in writing and verbally, in English
  • Competency in computer and PC software including email, internet, and MS office
66

Technologist, Process Engineering Resume Examples & Samples

  • Manage the migration roadmap for manufacturing products, including planning, route set up, pipecleaning and wafer qualification follow up
  • As manufacturing product owner, take over new products from R&D and facilitate launch in production line
  • Partner with process and design teams to develop plans for manufacturing product improvements in quality, performance, yield and cost
  • Analyze performance and yield data, generate reports to document results, and present recommendations to teams and customers
  • Support manufacture process and design experiments for product improvement
  • PhD in physics, EE or equivalent experience in relevant area
  • More than five years experience working in magnetic recording head technology
  • Strong working knowledge of statistics. Use data to determine experimental success, SPC to assess process capability and to ensure wafers meet requirements. Proficient in use of Microsoft Office Applications, JMP, and other statistical tools
  • Experience in and understanding of magnetic recording heads or semiconductor technologies
  • Strong knowledge and experience of wafer processes
  • Excellent written and verbal communication skills with the ability to work both independently and in a team environment are essential
  • Strong process development and characterization skills
  • Strong and creative problem-solving skills
67

Director, Process Engineering Resume Examples & Samples

  • Provide daily support for direct reports including process engineers and trainers
  • Lead process improvement initiatives ranging from low effort exercises to large kaizen workshops which brings together multiple departments/organizations
  • Capture/map current state processes, evaluate performance using data analysis, and facilitate process improvement via the DMAIC framework
  • Using industry standards create/deploy control charts, histograms, SIPOC’s, and process maps along with many more Six Sigma tools
  • Balance initiatives with professional judgment to accomplish difficult tasks though other people. This may include running a sponsored program using matrixed resources
  • Effectively communicate through written and oral reports to all levels
  • Seven or more years of applicable experience in process engineering work
  • Knowledge of and demonstrated experience in process improvement and resultant methodologies
  • Managed multiple projects to conclusion which showed measured improvement and had controls left in place
  • IT Operations and Engineering
  • Statistical analysis
  • Ability to build consensus
  • Excel knowledge
  • Public Speaking
68

Assistant Process Engineering Manager Resume Examples & Samples

  • (GAC) Yield driving
  • Work with customer and engineering team to achieve the NPI goals and close DFM issue on time
  • Manage EDM and small tools usage and cost reduction
  • Talent development
  • Conduct Automation project
69

Manager Process Engineering & Improvement Resume Examples & Samples

  • Six Sigma and Rapid Decision Making
  • Superior written and verbal communication skills to influence, motivate, and manage diverse groups
  • Knowledge of organizational principles and standards for health systems is desirable
  • Demonstrated experience in diagnosing, isolating, and resolving complex issues and recommending /
70

Team Lead Process Engineering Resume Examples & Samples

  • Actively manage, support and develop the Process Engineering team in order to continuously deliver high throughput and excellent results for the b123, b221, classical electrodes, reagents and quality control/ releases
  • Ensure operational process support, process quality and lead process improvement
  • Ensure strong interfaces with the other Team Leads with-in the BGE Engineering Department; Process Development, Process Qualification and Validation
  • Performance and compensation management, individual development and recruiting
  • Manage the team financially with accountability for budget and expenses
71

Pulp & Paper Process Engineering Co-op Resume Examples & Samples

  • Process design basis
  • Material & Energy Balance (M&EB) – spreadsheet or process simulator based
  • Process Flow Diagrams (PFDs)
  • Process descriptions
  • Utility balances and Utility Flow Diagrams (UFDs)
  • Preliminary Piping & Instrumentation Diagrams (P&IDs)
  • Process control description
  • Preliminary line/pipe list
  • Preliminary instrument list
  • Process equipment list
  • Preliminary Tie-in list
  • Equipment process datasheets
  • Instrument process datasheets
  • Hydraulic design reports
  • Preliminary general arrangement drawings
  • Budget pricing from vendors on major pieces of equipment
  • Process design philosophies
  • Relief system design basis
  • Relief scenario datasheets and relief valve process datasheets
  • Process effluent and emissions summary
  • Process risk analysis (PHA, HAZOP, etc.)
  • Candidate must be currently enrolled in at least their Junior year within an accredited Paper Science and Engineering, Chemical or Mechanical Engineering program
  • Experience with AutoCaD, Microstation, MS Applications (Excel, Word) preferred
  • Prior pulp and papermaking internship experience preferred
  • Ability to plan and prioritize tasks across multiple projects
  • Self-motivated and highly organized with good time management skills
  • Detail oriented work style is required
  • Ability to work in an often fast paced, hectic, and demanding environment
  • Good mechanical aptitude and knowledge required
  • This Co-op opportunity is for summer 2017 through the end of the first semester of the 2017-2018 school year
72

Enzyme Process Engineering Intern Resume Examples & Samples

  • ​Must have strong communication skills and ability to work effectively in a collaborative environment
  • ​Preferred Majors: Biochemistry, Engineering, Biomedical Engineering or similar fields
  • ​Independent laboratory experience a plus
73

Process Engineering & Modeling Manager Resume Examples & Samples

  • Supervise and lead engineers, scientists and technicians who design processes and oversee production and quality control of pilot plant process development as needed
  • Conduct engineering studies and recommend technology choices for industrial chemical and advance biofuels proc­ess flow sheet
  • Provide leadership in developing technology playbooks and transferring technology to production
  • Participate in the research and development of new products and procedures destined for Development Products
  • Oversee, Mass Balance, Process Flow Diagram (PFD), Piping and Instrument Diagram (P&ID) development
  • Hire, train, and mentor other engineers and supporting staff
  • Write performance reviews and solve internal issues
  • Discuss and lay out project specifications and timelines
  • Review, approve or modify project designs
  • Develop/manage high quality cost estimates and budgets and cost models associated with theoretical, proof of concept or pilot processes
  • Draft proposals and reports
  • Check technical accuracy of reports
  • Coordinate activities of group with others
  • Confer with higher levels of management as appropriate
74

Process Engineering Intern Resume Examples & Samples

  • Must be rising junior in a Bachelors program or above, with a minimum 3.2 GPA – both cumulative and major (will be verified by transcripts)
  • Must have strong communication skills and ability to work effectively in a collaborative environment
  • Working towards B.S./M.S./ PhD in Chemical Engineering, Biochemical Engineering, Bioengineering, Biotechnical Engineering, Bioinformatics or MS/PhD in Materials Science or Physical Chemistry
  • Preferred Majors: Biology, chemistry, biochemistry, physical chemistry, mass transfer, statistics
  • Working in teams
  • Strong communication
  • Intermediate level programming knowledge
75

Process Engineering Intern Resume Examples & Samples

  • ​Preferred Majors: Bioengineering, biomedical engineering, chemical engineering, material science, physics major preferred
  • ​Minimum academic level of graduating senior in Bachelor of Science program. MS/PhD preferred
  • Research experience in an optics, biochemical, chemical, microscopy, or physics laboratory
  • Proficient in writing technical reports
  • Data alaysis and reporting using Excel, OriginLab, Matlab, JMP, or R preferred
  • Ability to execute and accomplish goals in a self-directed fashion
76

Process Engineering Co-op Resume Examples & Samples

  • Track production data, understand, maintain, and report on weekly metrics such as OEE, MTTR, MTBF, defect rates, changeover time, etc
  • Understand the functionality of processing and packaging equipment (eg. labelers, cartoners, vision systems, tablet presses, etc.) to assist with troubleshooting activities, data gathering, and qualification projects
  • Identify opportunities to improve production efficiencies through the reduction of waste, equipment downtime, changeover times, etc
  • Author change controls, equipment qualification documents, capital appropriation requests, project management documents, training documents, etc
  • Gather and analyze data for corrective and preventative actions
  • Participate in projects as assigned
  • Enrolled in or completed a Bachelor of Applied Science program
  • Experience in a manufacturing setting is an asset
  • Experience with or working knowledge of industrial equipment such as PLCs, vision systems, sensors, VFDs, etc is an asset
  • Strong skills in Microsoft Office Suite (Word, Excel, PowerPoint, etc.) are required. Experience with statistical tools such as Minitab is an asset
  • Prior experience with a food, or pharmaceutical industry would be considered an asset
  • Basic knowledge of Good Manufacturing Practices and Good Documentation Practices
77

Process Engineering Specialist Resume Examples & Samples

  • Drive continuous improvement in safety, quality, productivity and tooling
  • Apply engineering principles and analytical techniques to establish and continuously improve manufacturing processes and products
  • Work with Tooling vendors, coordinate and conduct tool life studies, work with tool crib, manage inbound/outbound tooling, interact with 3rd party commodity tooling company,
  • Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes
  • Lead and conduct process audits to ensure process discipline is consistent with guidelines
  • Analyze vehicle inventory root causes; engage in mapping and corrective actions to reduce vehicle inventory
  • Lead role in resolving assembly related concerns
  • Lead variability reduction and lean manufacturing initiatives and best practices
  • Ensure compliance to Plant, Corporate, Governmental and Environmental standards
  • Identify throughput constraints and drive root cause improvements
78

Process Engineering Manager Resume Examples & Samples

  • Lead continual analysis of available performance data to identify & implement process improvement initiatives to deliver repeatable quality & optimum performance from the installed new technologies
  • The process technology lead on local project team to define manufacturing requirements, constraints and implications to P&E, RD&I and others, responsible for process sign off for implementation of new products and projects to operations
  • Ensuring and support the sites’ manufacturing team has the technical capability to manufacture current & future products via training, coaching and mentoring
  • Improving the process capability, equipment reliability, product quality, yield rate and productivity performance perspectives on ILD, AMS and paint mfg process in all sites. Provide strong trouble shooting to local site teams
  • Be the single process technology focal point for Deco China Supply Chain, connecting with global networks, transferring China’s challenges/learnings/solutions to others and implementing improvements based on learnings from other BU’s
  • Develop plans with SC management & Global Manufacturing technology teams to further deploy new technologies that will deliver quality improvements, cost productivity savings & realize insourcing opportunities, providing the detail process understanding and data to support design and delivery
  • Familiar with chemical industry HSE&S regulations & laws; good knowledge and experiences on MOC, PTW, hazard study and other process engineering related risk control methodologies
  • Analytical & continuous improvement mindset with experience of Lean, Six Sigma, DMAIC and SPC
  • Good people skill & strong leadership,
  • Able to create & maintain good relationship with authorities e.g. power bureau & technical supervision bureau etc to ensure license to operation
  • Good standard of written & spoken English
79

Process Engineering Co-op Resume Examples & Samples

  • Applies knowledge of general engineering principles, theories and concepts to support design of biopharmaceutical industrial facilities, while learning industry practices and standards
  • Works in a team environment to meet project goals, under direct supervision; work is reviewed for accuracy and effectiveness
  • Assists in development of process specifications for custom designed equipment packages, such as bioreactors, separations and drying equipment, aseptic filling, secondary packaging, and utility systems
  • Must have completed at least 2 years of college in accredited chemical or mechanical engineering program
  • Minimum 3.0+ GPA
  • No relocation or temporary living assistance is being offered
  • This opportunity is anticipated to run from January 2017 until the end of the current school semester
80

Process Engineering Technician Resume Examples & Samples

  • Performs set-up of processing equipment
  • Monitors, audits and provides guidance to line operators
  • Provides technical assistance to process development and engineering personnel
81

Process Engineering Specialist Resume Examples & Samples

  • Calculating extra costs for the non-performance of the sludge line
  • Reassessing process design and assessing available operational data and reports and recommend possible technical improvements
  • Defining a road map for the resolution, from a technical point of view, of the sludge line issue
  • Advising on possible measures that could be undertaken to improve sludge line performance and providing estimated costs
  • Competent in analysing and making recommendations on sludge digestion process, determining causes of problems and recommending remedial actions
  • Computer literacy (Microsoft packages)
  • Demonstrates integrity by modelling the UN’s values and ethical standards
  • Good problem-solving skills; ability to apply good judgment in the context of assignments given; ability to plan own work and meet tight deadlines; attention to detail
  • Fit and active for any necessary site-based activities
  • Consistently approaches work with energy and a positive, constructive attitude
  • Remains calm, in control and good humoured even under pressure
  • Demonstrates integrity by behaving according to UN’s values and ethical standards
  • Excellent analytical and document drafting skills and ability to gather, analyse and evaluate facts and to prepare and present concise oral and written reports
  • Minimum bachelor’s degree in Engineering in one of the following disciplines: civil, environmental; chemical or electro-mechanical engineering (or equivalent). Master degree and/or PhD in the above disciplines are plusses
  • 15 years minimum of experience required in wastewater discipline, particularly biological treatment process design and operations
  • Wastewater treatment facility process design for a broad range of facility capacities including municipalities with more than 50,000 population equivalent
  • Hands on experience with process and operations optimization and troubleshooting will be considered as an asset
  • Process design for mesophilic anaerobic digestion facilities for sewage sludge including for medium to large municipalities (minimum: 40,000 population equivalents)
  • Hands on experience with process and operations optimization and troubleshooting of mesophilic anaerobic digestion facilities for sewage sludge will be considered as an asset
  • Experienced in process modelling of anaerobic digesters (e.g. IWA AD models) will be considered as an asset
82

Process Engineering Manager Resume Examples & Samples

  • Initiate step change productivity planning leveraging technology and asset through translation of loss analysis into initiatives filling the funnel for the plants profit sustaining and enhancing project portfolio
  • Development and roll out of break through ideas in close cooperation with cross-functional partners on site and regional level including Research Development & Quality, Procurement and related functions to support strategies
  • Support the implementation of the IIM Pillar together with the Site/Cluster Engineering Manager through building pillar capability and governance as a first and project team capabilities as a second step
  • Ensure and manage the competence and skills development for asset hand-over and care (part of Technology transfer and training of new initiatives)
  • Bachelor’s Degree is required (preferably in Engineering)
  • 8 or more years of Engineering experience is required
  • Proven Project Management experience is required
  • Experience with Integrated Lean 6 Sigma with a focus on IIM (Innovation Initiative Pillar) is required
  • Fluency with computer applications such as Word, Excel, PowerPoint, AutoCAD, project management software and ERP systems (e.g. SAP)
  • Experience working across multiple countries and regions
  • Knowledge in confectionery and snacks technology and suppliers of respective equipment is a plus
  • Experience in designing equipment to meet AM and PM standards
  • Ability to identify engineering solutions that consider our global network and category position
  • Flexibility in work location is ideal
83

Senior Process Engineering Manager Resume Examples & Samples

  • Identify process optimisation opportunities and share best practice using Lean/Six Sigma and other analytical tool sets
  • Document processes owned by Service Delivery, with clear time and motion analyses – which will allow benchmarking in the future with new tools or process improvements
  • Assessment of third party products and determining their potential financial/customer benefit
  • Process review and provide support to the Client Solutions Design team with the finalising of processes that require Service Delivery action and ownership
  • Work alongside the Products & Technology Strategy team as they develop new technologies - with a focus on operational efficiency, effectiveness and the traveller experience
  • Identify and develop winning strategies that could transform the business – both from a cost/revenue perspective as well as from a servicing view point
  • Support Service Delivery (Operations) leaders in achieving their re-engineering and customer satisfaction targets
  • Work effectively with remotely based teams and vendors
  • Lead market, regional and global projects as required
  • Coach, train and facilitate others in Lean Six Sigma methodology
  • Drive large/mid-sized process engineering engagements with the responsibility to analyse, design and deliver operational process improvements for our Travel Consultants
  • Off-shore processes and services to deliver saves, own the E2E process mapping, establish process in new location and handover to the Operations group
  • Remove technical and cultural barriers to process-focused management
  • Balance systems' and processes' (as the case may be) technical/functional capability with operational costs, market demand and risk management concurrently
  • Measure and manage cross-functional performance
  • Certified Lean Six Sigma specialist/Master Black Belt Six Sigma
  • Minimum of 12 – 15 years' work experience, with the last 3 – 5 years in senior management roles
  • A degree in industrial/mechanical engineering, with a minimum 2 – 3 years of Industrial engineering experience
  • Previous direct responsibility included delivery of large scale projects focusing on operational process improvement and/or service design
  • Design Thinking/Lean Manufacturing/Value Stream Mapping/Statistical Data Analysis/Value Proposition
  • Excellent communication and presentation skills to different audiences in the organisation
  • Ability to own an entire process excellence program/project, from idea generation to implementation
  • Highly motivated, enthusiastic, results driven and have the ability to influence senior management stakeholders
  • Strong proficiency with Visio, Minitab, Microsoft Office (specifically MS Project, Excel, and PowerPoint)
  • Ability to work in a fast paced matrix environment across multiple geographies, functions and organizations often outside ‘standard’ working hours
  • Certification in PMI/Prince2/Agile Methodology
  • Industry knowledge: Contact Centre/Consulting
84

Process Engineering Co-op Resume Examples & Samples

  • This position is located in Dublin, OH
  • CO-OP rotation may include extended plant assignments to Texas City, TX, Calvert City, KY, Neal WV, Hopewell, VA or assignment to the Ashland Corporate EH&S Department
  • Current student attending college or university
  • Progression towards a BS Chemical Engineering is required with a minimum Engineering GPA of 2.8
  • Basic concepts of performing process material & energy balances, fluids transport, & some thermodynamics
  • Computer skills including Microsoft Word, Excel, and PowerPoint
  • CO-OP Rotation Schedule Requirement: Available for three (3) to five (5) rotation periods starting in Spring-2017 depending upon the class standing at time of CO-OP offer
85

Associate Director Process Engineering Development Resume Examples & Samples

  • Degree in life sciences, engineering or other relevant degree
  • BS with 14+ years OR MS with 10+ years OR PhD with 8+ years of experience
  • At least 5 years of experience in biologics development, bioprocess engineering and/or commercial manufacturing operations
  • Minimum of 2+ years’ experience in direct management of technical staff up to PhD level
  • Demonstrated commitment to continuous improvement – at the individual, department and organizational levels
  • Experience in technology transfer
  • Experience with statistical tools for monitoring process performance and analysis
  • Experience with experimental design, with a sound understanding of process validation
  • In-depth understanding of large scale biotechnology unit operations, principles of SIP and CIP, principles of biochemical engineering, and process data analysis
  • Experience in the dynamic management and leadership of technical teams
  • Knowledge of CGMP requirements and ICH guidelines in a regulated environment
  • Cooperates transversally – Shares information and seeks input from outside direct team. Develops strong cross functional relationships and partnerships with science and commercial organization
  • Act for Change – Creatively challenges the status quo to find new ways of working; looks for the opportunities that arise during times of change; readily adapts to new environment, jobs, technologies and processes, continuously looking internally and externally for best practices and areas for improvement.#LI-GZ
86

Business Process Engineering Lead Resume Examples & Samples

  • Strong end-to-end thinking with process orientation; ability to develop enterprise-wide solutions
  • Strong understanding of finance processes, systems/tools and architecture – preferably at MS
  • High level of organization, planning, prioritization and attention to detail
  • Ability to motivate self and others, often virtually
  • 7 plus years of relevant business experience in Program management
  • Consulting and/or process engineering background preferred
87

Process Engineering Manager Resume Examples & Samples

  • 10 to 15 years of experience in process development/manufacturing in the medical environment
  • 3 to 5 years of management experience
  • Bachelors degree in Engineering
  • Experience with pump systems including Insulin devices, drug delivery systems
  • Experience with medical design development phases (Feasibility, Characterization, Design Verification, Clinical and PQ Production)
  • Fluency in Spanish or Mandarin
  • Experience in medical device NPI
  • Statistics tools
  • SOP Development
88

Manager, Process Engineering CI Resume Examples & Samples

  • Demonstrated Management, Leadership, Negotiation, and Salesmanship skills
  • Working knowledge of Process and Project Engineering, Food Chemistry, Confectionery/Chocolate Technology, Confectionery Manufacturing Processes, Product and Process Optimization
  • Ability to define, develop, and implement complex product and process optimization projects
  • Ability to assess complex multidimensional situations and make critical decisions with limited information
  • Advanced problem solving and evaluation capabilities
  • Ability to establish priorities and execute multifunctional strategic project objectives
  • Provide leadership and direction on new technical platforms, technologies, ingredients, and processes
  • Demonstrated ability to manage multiple simultaneous projects covering multiple manufacturing locations
  • Effectively collaborate with Operations Teams, Technical experts, External government and industry agencies and Senior Management
  • Must possess technical supervisory experience
89

Plastics Process Engineering Manager Resume Examples & Samples

  • 5+ Injection Molding Process engineering within a manufacturing environment
  • Plastics processing, preferred
  • Knowledge of and ensure compliance to Company and Governmental safety standards, policies and procedures by staff and outside vendors
  • Required Intermediate group facilitation and project management skills
  • Knowledge of bulk handling/product scrap recycling processes
  • Intermediate knowledge of robotics/automation processes and programming
  • Working knowledge of Lean/Six Sigma manufacturing, including 5S
  • Basic Computer Skills – Microsoft, Word, Excel, AutoCad
  • Excellent observation, troubleshooting and planning skills
  • Problem solving and solution generation
90

Process Engineering Manager Resume Examples & Samples

  • Supports the daily needs of the assigned manufacturing area in terms of meeting the requirements for safety, quality, compliance, capacity, availability and cost as part of the sustaining engineering function
  • Supports the daily and strategic needs of the site in terms of ongoing and preventive maintenance in order to minimize equipment down-time, ensure equipment process stability and manage assets
  • Bachelor’s Degree in Science, engineering, or related discipline required
  • Advanced Degree preferred
  • Minimum of 8 years of experience in an operations/engineering role is required
  • A minimum of 8 years of experience in manufacturing engineering is required
  • A minimum of 5 years of experience in a leadership role is required
  • Proven history of leading continuous improvement projects and programs is required
  • Excellent project management and organizational skills with the ability to prioritize, schedule and follow-up to ensure successful accomplishment of established strategies, project portfolios, goals, and objectives is required
  • Strong written and verbal communication and computer skills is required
  • A proven track record of motivating teams, team building, and employee involvement is required
  • Previous experience within the Healthcare/Medical Devices Sector is required
  • Experience in CAPA, risk assessment, and process validation is required
  • Certification in Six Sigma and Lean is preferred
  • This position is located in Monument CO, may require up to 20 % domestic/international travel.Engineering (Generalist)
91

Process Engineering Tech Resume Examples & Samples

  • Disposition of all non-conformance materials that produced by the manufacturing line
  • Investigate and implement countermeasures to improve process Cpk and product yield
  • Maintain and help develop up-to-date maintenance and calibration procedures and schedules
  • Must be flexible to support both day, swing and alternative work week of manufacturing schedules (Some weekends and holiday required depending on production line support)
  • Responsible with parts and tools inventory
92

Thermal Process Engineering Leader Resume Examples & Samples

  • Bachelor's Degree in an Engineering discipline
  • Minimum of 10 years engineering experience in process design / engineering of Thermal treatment systems with some knowledge of other treatment technologies
  • Demonstrated leadership style showing capabilities to accelerate change, improve culture, work in a rapidly changing environment and operate independently to deliver business results
  • Strong communication, messaging, influencing and team building skills
  • Understanding of Thermal competitive landscape
  • Ability to speak effectively before groups and customers, clients, and other employees of organization
  • Self-motivated, ability to drive projects to completion with minimal oversight, while demonstrating significant problem solving ability with an unfailing dedication to deadlines and commitments
  • Ability to read analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations
  • Ability to solve practical problems and deal with a variety of variables in situations where only limited information exists
  • Computer proficiency with SAP, Compass, MS Access, Microsoft Word, Excel, Power Point, GE Process Design Tools
  • Master’s Degree in Engineering
93

Process Engineering Manager Resume Examples & Samples

  • Manage, plans and directs implementation of equipment and process modifications to improve production efficiencies, manufacturing techniques and production yields for existing & new products
  • Sets objectives for the performance of work team member
  • Provides guidance to the work unit and advises managers and supervisors on issues related to sub-function
  • Ensures the implementation of tactical plans to achieve objectives
  • Determines how best to utilize work unit resources to achieve end results
  • Ensures accuracy, quality, and timeliness of results
  • Makes decisions that directly impact the achievement of work unit and sub-function objectives
  • Has limited operational impact & ensures work unit milestones and goals are achieved
  • Begins working on career development responsibilities for direct reports
  • Applies broad knowledge to solve problems
  • Accountable for implementing changes to process , material or tooling
  • Adapts communication style to engage and motivate work units
  • Communicates highly complex information to internal and external contacts
94

Process Engineering Intern Resume Examples & Samples

  • Pursuing a bachelor's Degree from an accredited university or college in Chemical Engineering
  • Have excellent communication skills
  • Local candidates preferred
95

Materials & Process Engineering Intern Resume Examples & Samples

  • 3rd year or later undergraduate student studying Materials Science, Composite Materials Engineering or related field preferred
  • Candidates with curriculum including study of composite materials and / or processes preferred
  • Experience and success in working within teams
  • Proven ability to multi-task and self-starter able to work independently
  • Strong interpersonal skills to drive actions necessary to accomplish assigned tasks
  • Strong organizational skills in managing time, projects and resources
  • High degree of attention to detail and level of accuracy required
96

VP of Process Engineering Resume Examples & Samples

  • Continuously strive to understand Conversant's changing business environment, help lead the department Enterprise Risk Assessment process, and jointly develop the associated Internal Audit plan
  • Provide support and guidance to management on how to effectively manage new opportunities and areas that might have unique business risks
  • Participate in Internal Audit plans and effectively communicate audit results to all levels of management
  • Address the design and effectiveness of internal controls and clearly explain remediation expectations and timing and follow up to ensure effective remediation
  • Oversee the annual SOX program from the Engineering and Operations perspective, which includes planning and executing a comprehensive program to assess the company's compliance with the provisions of the Sarbanes-Oxley Act and partner with external auditors to ensure proper coverage and minimal duplication of effort
  • Undertake other special projects as requested by management
  • Ensure resources, both internal and external, are efficiently and effectively deployed
  • BS in Computer Science or Computer Information Systems or related technical discipline or equivalent work experience
  • Proven leader with 10+ years’ experience in internal audit, data security and privacy
  • Extensive industry knowledge in Ad Tech and Measurement
97

Aseptic Process Engineering Specialist Resume Examples & Samples

  • Minimum 10 years experience in Manufacturing working in sterile environments with background in engineering, sterile process equipment design, and sterile facility design
  • Extensive hands-on experience in executing facility and equipment train risk assessments including smoke studies, Clean Room Qualification, Cleaning-in-Place and Steam-in-Place validation, Environmental Monitoring, etc
  • Incumbent must possess strong analytical, problem solving, and technical writing skills required to provide Quality and Technical expertise for sterility assurance investigations related to media simulation or/sterility failures, product deviations, equipment failure, filter validation, and contamination control
  • Must also possess demonstrated interpersonal skills, including leadership, coaching and development, performance management, motivation, communications and negotiation
  • Green or Black Belt certification strongly desired
  • Pharmaceutical Experience in an operations, technical or maintenance leadership position
98

Process & Engineering Scholarship Resume Examples & Samples

  • Are you interested? Please do apply now
  • Please do attach a CV (without foto) and university grades to your application. (Five documents á 400 Kb can be added.)
  • We only can consider complete applications consisting of all relevant material
  • We are looking forward to receiving your application
99

Process Engineering Intern Resume Examples & Samples

  • Currently enrolled in a bachelor’s degree or Master’s Degree program in Material Science or Metallurgical
  • A cumulative GPA of 3.0 or higher
  • Relevant internship/work/ research experience
100

Process Engineering Manager Resume Examples & Samples

  • Prioritize, guide and facilitate the activities of the process engineering function to meet organizational goals, initiatives and requirements
  • Establish and maintain Process Engineering performance metrics and reporting systems
  • Lead the process engineering initiatives to improve production processes and to reduce costs
  • Performs other work related duties as assigned Internal Customer Support
  • Must have the ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations
  • Must be able to write reports, business correspondence, and procedure manuals
  • A minimum of 5 years of engineering experience within a manufacturing environment
  • Direct leadership/supervisory experience
101

Process Engineering Asst Manager Resume Examples & Samples

  • Hands on experience in managing and resolving different issues across all processes related to PCBA from SMT, COB and wire bonding process to box build assembly
  • Establish and improve manufacturing process capabilities for Asia sites based on site capability matrix
  • Participate in the development of new technology and factory qualification activities driven by the roadmap
  • Manage development projects that are designed to meet customer product specifications, delivery and cost expectations
  • Engage with cross functional teams to develop and support NPI, new equipment evaluation and new Processes
  • Improve yields, throughput, quality, reliability and provide Failure analysis for any given product covering SMT,COB, wire bonding and box build assembly
  • Be able to travel for 10-25% of the time to provide technical support within Asia or other continent as required
  • Evaluate new materials and processes for improved performance and lower cost
  • Create best practice document from all aspects of technical rendering and development projects being assigned to manage
  • Produce technical papers and be able to present in bigger crowds like SMTA, IPC, iNEMI, and other Engineering or customer forums
102

Manager, Op Ex / Process Engineering Resume Examples & Samples

  • Leads site efforts focused on use of DMAIC and statistical methods to execute continuous improvement projects and improve process robustness. Monitor production trends by statistical analysis and react to problems, trends and opportunities within the production process
  • Proactively identifies opportunities, solves problems, and implements solutions to improve operational and quality performance
  • Supports culture of continuous improvement in all levels of the site, advocating appropriate Mindsets and Behaviors. Serves as a Gemba Sensei and promotes the use of Lean Six Sigma methodology and techniques
  • Integrates shop floor problem-solving through Method 1 techniques, Human Error Reduction Concepts and integration into deviation investigations
  • Evaluate equipment capacity/loading for production areas
  • Advocates use of visual dashboards to drive and recognize shop floor performance
  • Continuously challenge the status quo by encouraging alternate ways of thinking and taking calculated risks
  • Trains colleagues in six sigma tools, as well as supporting Kaizen Event Leaders
  • Supports Site Balanced Scorecard
  • Using a data driven approach, coordinate with Production, Microbiology Lab and Maintenance Departments to develop strategies to increase production, such as: improvement of potencies, reduction of costs, and process control
  • Responsible for start-up validation and testing of units to pass production regulation requirements
  • Develop, submit, manage, and implement capital orders for new or replacement equipment
  • Willingness to be an external resource to other areas of Zoetis
  • Bachelors Degree with 7+ years of experience in a technical discipline or related field, or a Master’s Degree with 5+ years of experience
  • Demonstrated leadership of high capability professionals and OTE colleagues
  • Effective written and oral communication skills
  • Proficiency with Microsoft Applications and Minitab statistical software
  • Method 1 and Method 2 certification
  • Ability to access all areas of the plant. Predominantly in an office environment, with frequent time in the manufacturing area. Use of hearing and eye protection is required
  • Black Belt Certification is preferred
  • Strong experience in cGMP environments is preferred
  • Accomplished presentation skills and ability to communicate across all levels of the organization
103

Manager, Process Engineering Resume Examples & Samples

  • Responsible for performing all aspects of engineering and design and ensuring that the total delivery of the process deliverables meet the quality expectations, schedule and are within performance budgets
  • Manage the department staff level to balance the number of resources with the amount of work. This includes increasing staff, loaning to and/or borrowing from other offices or shifting work between offices
  • Provides technical guidance and mentorship to the department
  • Assist in project proposals by establishing scope, determining the required engineering/design budgets and when necessary, serve as process expert during proposal presentations
  • Maintain effective relations with department members, multidiscipline engineering departments, leadership group and clients
  • Broad and extensive management and engineering design experience in the Refinery, Oil and Gas industry with either EPC and/or operating company
  • Be an individual who has the strengths, experience and drive to effectively lead, challenge, and inspire the department staff to work together cohesively as a team
  • Strong business development skills, including significant experience building and maintaining productive relationships with a client base
  • Graduate of an accredited Chemical or Industrial Engineering Degree program
  • Professional Engineering license (BC and/or Alberta)
  • Comprehensive understanding of principles, theories, concepts, and industry practices and standards and their application in the Refining industry
  • Proficiency with HYSYS, PRO II and Pipe-Flo software. Proficiency with SRC slurry system hydraulic software application considered an asset
  • Excellent team/leadership communication skills
  • Willingness and ability to travel within Western Canada periodically to client plant sites and offices
  • Responsible for advocating and adhering to all health and safety policies and guidelines
104

Associate Director, Process Engineering Resume Examples & Samples

  • Scope requires an in depth knowledge of pharmaceutical or food industry process equipment related to process equipment, HVAC , purified water systems (R.O., WFI), and general working GMP knowledge of pharmaceutical manufacturing facilities and all major utilities
  • Coach, motivate, develop, recognize and mentor the process engineering staff, including senior level engineers and managers
  • Through coaching, direct others to resolve project issues based on own demonstrated success in solving difficult and complex problems
  • Manage and forecast capital and expense budgets
  • Provide leadership to assess and provide guidance and risk assessments regarding requirements for redundancies to equipment, processes and systems
  • Responsible for assigning resources to support manufacturing operations, training initiatives and process engineering projects
  • Independently plans, schedules and leads cross-functional team in detailed phases of the engineering support work
  • Assess, analyze, advise, propose and direct improvements that will deliver greater productivity, capacity, reliability and compliance for the process engineering department
  • Review, analyze and direct capital and expense projects to achieve greater equipment and facility reliability, improve process performance and improve product quality
  • Establish, develop and drive Good Engineering Practices in all projects undertaken and support services provided. Utilize standard methodologies that have been established for project and portfolio management as well as maintenance work order management
  • Participate in and facilitate the harmonization and coordination of efforts between other teams such as Validation, Manufacturing, Facility Engineering, Maintenance, Technical Services, R&D, EHS and Regulatory
  • Demonstrated problem solving skills to support resolution of engineering, manufacturing and/or quality related issues
  • Shall interface with regulatory agency representative (e.g. FDA/EMA) as the site Process Engineering SME during internal and external audits and shall be able to defend current practices to such agencies
  • Generate innovative solutions to highly complex problems where little clear precedence exists
  • Shall work and consult with counterparts within Engineering
  • Shall work with site validation, manufacturing, quality and PDTS leads to implement technical solutions and programs
  • Shall provide process technical support to Los Angeles site and remote sites as required
105

Process Engineering Specialist Resume Examples & Samples

  • Engage in Hydro-desulphurization process operation using model development and cross-train members of R&D and Technology Development teams
  • Perform process design calculations for a) Catalytic distillation column design b) Reactor design and process simulation for each, utilizing in-depth knowledge of thermodynamic validation process
  • Perform process design calculations for Reactor design and process simulation
  • Review, verify and evaluate company in-house modelling approach using tools including excel macros and process simulation software
  • Develop process simulation model of entire unit for Basic Engineering Package
  • Prepare, review and comment on Licensor Supervisory Operating Manuals (SOM)
  • Develop Process Flow Diagrams (PFDs), heat and material balances, Piping and Instrumentation Diagrams (P&IDs), instrument data sheets, sizing information for Process Equipment (heat exchangers, distillation columns, separators, filters, compressors, pumps, etc.), process control philosophy and Cause and Effect Diagram
  • Review and/or calculate utility/power consumption
  • Review inquiries and prepare technical proposals for new and revamp units
  • Contribute to and participate in kick-off meetings and client review meetings as required
  • Perform work using engineering computer tools and simulation software including Pro II or Simsci
  • Participate in the maintenance and development of design tools and documentation
  • Present results verbally and in writing
  • Participate in travel and field assignments as required
  • Bachelor’s degree in Chemical Engineering and 3 years of experience in job offered or 3 years of experience in the Related Occupation
106

Manager, Process Engineering Resume Examples & Samples

  • With the Process Eng AD and peer managers, co-managing the Process Engineering annual operational expense budget (~$6M total) and the annual sustaining small capital budgets (<$2M)
  • Directing lead engineers and staff in the execution of the day to day support to manufacturing operations
  • Monitoring the performance of the department against operational goals, managing group of 4 - 7 FTE staff
  • Maintaining the process equipment and systems in a safe and compliant state
  • Supporting presentation of and defending the site’s engineering programs to regulatory agencies, and coordinating responses to regulatory filing queries or requests
  • Performing regular and periodic department performance metrics reviews
  • Identifying areas for improvement to reduce energy or utility (e.g., water) consumption
  • Providing career development and performance coaching for direct reports
  • Providing supervision and direction to direct reports for execution and prioritization of activities to support the DS manufacturing schedule. Monitoring the performance of department goals and managing staff of -4-7 FTE personnel
  • Supporting Technology Transfers and the related equipment design, installation, commissioning, and validation activities to support the manufacturing schedule
  • Maintaining the process equipment and engineering systems in a safe and compliant state. Aligning procedures and best practices across sites. In absence of the Process Engineering AD or at the discretion of the Process Engineering AD, review and approve major deviations or other compliance documents requiring AD level approval
  • With the Process Eng AD and peer managers, co-managing the operational expense and capital budgets. Identify and implement system improvements and capital upgrades
  • With the Process Eng AD, co-developing strategic vision and long-term objectives for department, and support development of strategies for the overall Global Engineering functions
  • Practical Knowledge of GMP’s, Delta-V automation system, PLC systems, Engineering documentation (piping & instrumentation diagrams, isometric diagrams), SOP’s
  • Process equipment system & process support system design and operational knowledge - particularly upstream (cell culture and harvest) bioprocessing equipment
  • Ability to manage technical staff and develop personnel
107

Technologist, Process Engineering Resume Examples & Samples

  • Analyze and characterize designs via engineering validation testing
  • Support of new technologies and features - characterization, validation and integration
  • Population and individual drive level failure analysis and corrective action generation at all stages of product development
  • Develop, verify, and implement algorithms for the manufacturing test process
  • Analyze test process and field data for drive design improvements
  • Manufacturing yield improvements
  • Reliability improvements
108

Process Engineering Discipline Lead Resume Examples & Samples

  • Process design from concept through to completion
  • Creation and ownership of process design documentation; Block Flow Diagrams, Process Flow Diagrams, Material and Energy Balances, and Piping and Instrumentation Diagrams
  • Creation of written process equipment specifications defining all requirements for process equipment such as tanks, vessels, pumps, heat exchangers, condensers, reactors, columns, re-boilers, etc
  • Experience performing pressure relief device sizing and pressure reliving system evaluations in chemical plants
  • Experience selecting and specifying process instrumentation
  • Experience performing hydraulic evaluation
  • Experience performing process simulation of chemical operations
  • Experience with OSHA requirements such as Process Safety Management
  • Experience conducting process hazard analysis
  • Technical leadership, mentoring and oversight of the process engineering team
  • Develop work flow and QC standards related to the services provided by the group to improve efficiency and quality as part of PCI Skanska Quality policy
  • Maintain a goal to eliminate errors and omissions that may add unplanned costs to our clients or PCI Skanska, cause project schedule delays, or damage our or our client’s reputation
  • Perform quality audit prior to submittal of any deliverable. Support and enforce PCIS’s QC standards
  • Serve as the technical expert and leader of the staff within the group
  • Applicants should have a minimum of a BS in Chemical Engineering and 15 years of experience in the engineering services industry
  • A professional engineering license in Chemical Engineering is preferred
  • As a process engineering discipline lead you will be expected to demonstrate a high standard of ethics, professionalism, client focus, customer service, ownership and accountability
  • This position requires a resourceful and flexible individual who is effective at handling multiple tasks
  • The successful candidate must have computer skills, strong presentation skills and be an effective written and verbal communicator
  • This role requires an effective delegator and an individual that can be delegated to while working in a collaborative environment with multiple team members
  • Short term domestic travel possible
  • A working knowledge of AutoCAD
  • AspenONE Plus Suite of Software
  • Smart Plant Instrumentation
  • Hearing: Ability to hear safety alarms and signals while wearing hearing protection
  • Breathing: Ability to work while wearing a respirator or self-contained breathing apparatus
109

Manager Process Engineering Resume Examples & Samples

  • Day-to-Day responsibilities include: completing assigned tasks in a timely fashion, performing routine development tasks and tool operation, and improving specific process development knowledge and skills
  • Hands-on dry etch process development. This includes performing customer demonstrations, R&D of new dry etch technology trends, and meeting the objectives of customer requirements for current and future technology processes
  • Must be able to operate all associated semiconductor metrology equipment utilized in the demo lab and be able to train new engineers in their use
  • Must be able to independently complete multiple process development tasks with minimal to no instructions. Should be able to manage multiple demos with limited support
  • Utilize analytical tools & techniques to solve process development issues
  • Analysis of data, design and execution of experiments including DOE
  • Lead customer discussions regarding demonstration results, propose assumed mechanisms and counter-measures, new product evaluations, training of process and/or equipment, and troubleshooting of process issues
  • Set targets, plans, and strategies related to their tasks and demonstrations
  • 10-20 years Plasma Etch Process Experience or semiconductor processing preferred
  • Possible travel to Japan for training or customer sites worldwide as needed
  • Must be willing to travel to Japan for project and process development programs
  • Candidate must have good verbal and written communication, strong analytical capabilities and trouble shooting skills, and must work well in a team environment
  • Strong plasma etch technical knowledge and how it relates to semiconductor wafer processing
  • Advanced understanding of, and experience with, Dry Etch / RIE
  • Strong engineering analytical/problem solving skills. Understanding of Scientific Method and experience using it
  • Ability to lead engineers and small teams. Supervise new hires and provide advanced training, etch process theory, and guidance
  • Must be able to work in a clean room environment for extended hours
  • Oversee some of the logistics of the demo lab as it relates to their program. Such as manage teams supply needs, wafer needs, gas needs and occasional delivery or pickup of demo lab parts or wafers
  • Manage scheduling of resources. Both human and Equipment
  • Strong computer skills including Microsoft Office software competency
110

Process Engineering Section Manager Resume Examples & Samples

  • Degree in related field
  • Master degree will be an added advantage
  • A minimum of 5 years of manufacturing experience at supervisory
111

Process Engineering Section Manager Resume Examples & Samples

  • Process sustaining and improvement of existing processes related to
  • Bachelors degree required, Masters degree preferred, in Electrical, Mechanical or Chemical Engineering, Physics or related field
  • Demonstrated experience in managing and building teams with an emphasis on leadership fundamentals and effective communication
  • Position requires in-depth knowledge of all IC semiconductor processes to include thin films, implant and associated processes
  • A minimum of 10 years experience in semiconductor fab processingis required with a minimum of 2 years of management experience preferred
  • A solid working knowledge of device physics and process integration is key
  • Six-sigma training (black or green belt), and/or lean manufacturing certification
  • Excellent SPC/DoE methodology will be differentiating
  • Experience of technical requirements specs, generating specs, testing spec limits and characterizing processes across process windows and all other consideration in manufacturing should be demonstrated
  • Can assess a situation, research a solution, apply corrective action, and articulate it
  • Proven ability to achieve end results
  • Possess solid communication skills
112

Process Engineering Director Resume Examples & Samples

  • Must worked in Semiconductor field and have strong technical skills
  • English could act as work language
  • A minimum of 10 years of manufacturing experience at supervisory level and have direct working experience in PIM (Power Integrated Module) Project
  • Six Sigma Black Belt and Master degree will be an added advantage
113

Senior Manager, Process Engineering Resume Examples & Samples

  • Process definition including the process metrics for quality, service, cycle time, and productivity
  • Capacity Planning for headcount management based on monthly volume
  • Process engineering and re-engineering based on company/compliance/market needs
  • Interact with all Operations managers to develop and implement process refinements
  • Articulate all work in a presentation format for Business Leaders
  • Monthly monitoring of Operations performance and efficiency
  • Interact with IT to articulate, promote and manage operational needs and projects
  • Ability to manage multiple processes and projects
  • Candidate understands 6 Sigma (DMAIC/DFSS), Lean & Kaizen philosophies & principles
  • Take initiative & drive projects successfully & energetically
  • Understanding of supporting systems & tools such as Visio, Excel, QI Macro/ Minitab etc
  • Effective communication skills for project management
114

Principal Tech-pvd Process Engineering Resume Examples & Samples

  • Monitor, control, and qualify state of the art 300mm semiconductor equipment · React to error messages of factory systems and/or equipment
  • Understand and follow all health, safety, and environmental procedures and requirements
  • Minimum 8 years relevant experience (experience in semiconductors, manufacturing or technology)
  • Working knowledge of Statistical Process Control methodologies & systems
115

Engineer Metrology Process Engineering Resume Examples & Samples

  • Work on development or transfer of recipes for a variety of metrology tools, in particular AMAT and Hitachi CDSEM and KLA Overlay tool used in advanced manufacturing processes
  • Perform tool evaluation and selection for advanced manufacturing processes
  • Develop BKMs (best known methods) to be used for both recipe generation, optimal tool performance, and troubleshooting
  • Define process and tool improvement plan to drive tool performance to factory and team KPIs(key performance indices)
  • Train of shift engineers and technicians on tool operation and issue resolution using BKMs
  • Work very closely with colleagues from the all the unit process and integration groups to promptly implement their specific requests to increase the reliability and effectiveness of your services
  • BS, Engineering,
  • Language Fluency-Fluent in English Language-written & verbal
  • Graduate degree (MS or PhD), Engineering. Excellent interpersonal and presentation skills, energetic and self starter
  • Outstanding communication skills - both written and verbal. Demonstrated ability to communicate well with all levels of the organization and experience in working with external constituencies
  • Demonstrated ability to meet deadlines and commitments. Individuals will be and must be able to understand complex automated systems and human interactions
116

Senior Engineer Metrology Process Engineering Resume Examples & Samples

  • Work on development or transfer of recipes for a variety of metrology tools, in particular AMAT and Hitachi CDSEM and KLA Overlay tool, used in advanced manufacturing processes
  • Perform tool startup verifications and ensure ongoing tool matching for critical processes
  • Engage in continuous improvement activities on your tools and develop solutions for higher throughput and improvement in tool performance
  • Define and utilize a system to optimize tool performance with respect to tool stability as measured by SPC and engage in fleet matching activities for the toolsets you own
  • Technology related Bachelor's plus 3 years of experience or Master's plus 2 years of experience; or PhD degree plus 0-1 year of experience in the semiconductor industry
  • Experience and understanding of high volume manufacturing is preferred
117

Business Process Engineering Associate Resume Examples & Samples

  • Document processes and procedures using standard methodologies and tools
  • Analyze process methodologies, enterprise process leadership, and impact of recommended changes
  • Ability to develop relationships both in person and over the phone
  • Ability to analyze information and use logic to address work-related issues and problems
  • Average manual dexterity in use of a PC, phone, sorting, filing and other office machines
  • Ability to work with cross functional teams
  • Ability to work on complex projects with general direction and minimal guidance
  • Bachelor’s degree in a related field preferred, or equivalent combination of education and experience
  • Business process engineering certification (i.e. Six Sigma Yellow Belt, Six Sigma Green Belt, Six Sigma Black Belt, any relevant American Society for Quality certification) desired
  • 0-1 year related work experience in business process design/improvement, experience with ITIL, Baldridge, or ISO desired
118

Process Engineering Manager Resume Examples & Samples

  • Lead the Process Engineering team. Manage team on process development, project execution, production line setup, production line improvement, etc
  • Ensure the engineering meet the customer (including manufacturing department) requirements and expectation. Actively coordinate the interface among teams globally and locally
  • Direct and control the Schedule, cost, resources, efficiency of assigned project. Ensure good quality of project deliverables
  • Ensure the engineering activities comply with Company Procedures, TSS 16949, project specifications, standards and any project specific requirements
  • Prepare, review and update Project Execute Plan and relevant Project document. Review regularly the performance of the team, prepare and approve external or internal project report prior to release
  • Team development. Motive, rally and retain the team. Cultivate good working environment
  • Strong experience and technical background for Process development, equipment development and production line improvement
  • Strong experience in 6 sigma, lean manufacturing, etc. Familiar with engineering deliverable at different stage of project
  • At least 10 year Auto industry experience and fully understand APQP, TS 16949
  • Strong leadership. Strong skill in team development. Be able to lead/coordinate in complex and difficulty situation. Be resilient under pressure and challenges
  • Experience of communicating with global team. Experience with international projects
  • Great sense of responsibility and teamwork spirit, remain active and positive in inter-communication
  • Excellent written and spoken English
119

Process Engineering Technician Resume Examples & Samples

  • Support the process development and launch for both derivative and non-derivative new products
  • Set up sample line processes fixtures and equipment
  • Build A and B level samples
  • Conduct designed experiments to understand process variables
  • Run tests to validate that specifications are met
  • Create process documentation including work instructions visual aids and route sheets for samples capture lessons learned for transfer to production process and equipment design
  • Make recommendations to improve manufacture of new and existing products
  • Assist in the debug and qualification of new production equipment
  • Travel to the make site and assist equipment installation set up and training of BCP site personnel prior to launch. Must have the flexibility to travel internationally for several weeks at a time as needed
  • Experimentation data analysis equipment troubleshooting
  • Assist on advanced quality planning (APQP) documentation as needed
  • Carry out sample line equipment PM’s as needed
  • Support the milestones of the NPD process as well as the IMP process for transfer to the make sites
  • Additional requirements
  • Must be able to balance multiple priorities and receive direction from multiple engineers as required
  • Should be self-directed and well organized
  • Must take initiative to search out assignments when not fully loaded
  • Technical writing and capturing experimental results and analysis for future references is an area to help with future process development efficiency
  • Problem solving skills including the ability to diagnose root cause equipment and process problems
  • Ability to read prints and machine fixtures, tooling, etc from those prints or from a Solidworks model. Experience on CNC machines highly desired
  • The ability to perform device failure analysis if needed
  • Be able to interpret data and make observations/recommendations from experimental results
  • Should have the flexibility to perform as a Process, Design, and/or Mechanization technician if needed
  • Must have working knowledge of basic statistics (mean, sigma, Cp, Cpk, etc.)
  • Experience with welding, electrical testing, calibration, optical assembly, soldering, dispensing, and automated assembly equipment is preferred
  • Candidate must be able to work in clean room environment when required and maintain controls
  • Ability to train sample builders, failure analysis personnel, and Make site engineers and technicians as needed
  • Able to communicate effectively with all functional groups (design, process, quality, etc.)
  • Be willing to ask for help and provide assistance to others when needed
  • Must have a working knowledge of MS office applications (Excel, Word, PowerPoint)
  • Previous experience in a process or manufacturing engineering environment is preferred
  • International travel experience is also a plus
120

Process Engineering Section Head / Manager Resume Examples & Samples

  • Lead teams and User Groups in establishing standards based on best practices and continuous improvement projects
  • Establish equipment strategies, lead equipment and materials evaluations Implement continuous improvement programs and process controls related to Process Engineering
  • Provides DFM feedback through active participation in new product introduction activities
  • Support asset and resource management intra-site
121

Process Engineering Intern Resume Examples & Samples

  • Progress towards a bachelor's degree in Chemical or Mechanical Engineering or related field. Candidates must have completed at least 2 years of college and have a GPA of at least 2.8/4.0
  • Ability to learn/understand the corn wet milling process, and the systems and principals involved in its operation
  • Ability to troubleshoot, identify improvement opportunities, implement action plans and follow-up to ensure results
  • Ability to work on capital projects/permits, and perform engineering functions in a manufacturing environment
  • Strong communication skills, with the ability to present technical information and prepare concisely written reports
122

Process Engineering Intern Resume Examples & Samples

  • Progress towards a bachelor's degree in Chemical Engineering or related field. Candidates must have completed at least 2 years of college and have a GPA of at least 2.8/4.0
  • Assertive, creative, energetic, and positive thinking
  • Demonstrate analytical problem solving skills
  • Developed multi-tasking and time management skills
  • PC skilled with word processing, database, presentation, and spreadsheet experience
  • Well-organized and team-oriented with leadership potential
  • Ability to deliver results in a very challenging and fast-paced environment
  • Analytical, critical thinking and problem solving skills
  • Multi-tasking and time management skills
  • Ability to work as a team member with a variety of people at all levels within the organization
  • Self-starter with a strong work ethic
  • High level of integrity and sincerity
  • Proactive and innovative with a strong will to succeed
123

Manager Process Engineering Resume Examples & Samples

  • Manages the preparation of Capital projects from inception through execution into a production state. Executes project documentation including but not limited to conceptual ideas, costing options, project plans, Factory Acceptance and Site Acceptance testing, installation, commissioning protocols, qualification strategy/protocols, and project closeout. Oversees creation of documentation packages, which include data review and summary of each assessment to ensure compliance with cGMPs. Provides regular report-outs to site senior management on the needs of the operation and the results of the project document packages
  • Leads The Process Engineering Team to deliver exceptional customer service in the key areas of safety, quality, costs and team development
  • Coordinates project management processes that provide the tools to effectively initiate scope and execute projects that exceed our customer requirements in the areas of on time, on budget and meet specifications
  • Partners with Manufacturing, Validation, Utility Services, Maintenance, Metrology, Quality and support labs to assure effective communication on problems, issues, and schedules related to project engineering and manufacturing support
  • Support capacity and efficiency improvement projects by providing engineering resources to meet stage gate deliverables and project objectives
  • Provides strategic direction and support in developing innovative design solutions to complex problems. Anticipate potential problems and design preventative solutions
  • Contributes in developing departmental policies, programs, SOPs, and engineering standards to meet current industry, corporate Quality, and external Regulatory requirements
  • Responsible for growing the culture of personal engagement, ownership, customer service and accountability towards achieving and exceeding project expectations. Communicate concerns, needs and recommendations to upper management
  • Ensure compliance of projects with all relevant local, state and federal safety and environmental regulations, guidelines, and policies. Also ensure compliance with FDA/cGMP regulations guidelines and policies
  • Demonstrate personal commitment and takes action to stay current regarding industry related new and emerging technologies that will continuously improve manufacturing efficiencies, quality and safety
  • Accountable for all project performance/KPI’s to ensure results are delivered as expectedwith the ability to communicate to results to Senior Management
  • Responsible for the performance and development direct reports through regular feedback, setting goals, establishing personal development plans, measuring performance and creating a readiness pipeline for future senior engineering and leadership roles
  • Participates in department and capital budget preparation. Ensure budget, schedules and performance requirements are met
  • Subject Matter Expert (SME), reviewer, and/or approver of controlled documents within
  • 7 years Engineering experience within a pharmaceutical/biotherapeutics manufacturing operation
  • Extensive experience in cGMP and FDA regulated environments. Knowledge of
124

Process Engineering & Molding Manager Resume Examples & Samples

  • Responsible for process engineering project management and reporting; including project timelines and ahead/behind tracking. Responsible for implementation and integration of new processes into production ensuring robust process controls are in place for producing repeatable quality products. Maintain existing documentation for products and processes
  • Responsible for staffing training, budgeting, and directing the Process Engineering group
  • Responsible to clearly define expectations for all staff linking the goal tree to operational priorities to include safety, quality, delivery and cost. Manage the PMD process for all staff and define tactical and strategic organizational change to drive execution
  • Ensure monthly training/safety meetings with all associates are “quality events” and are completed on time
  • Accountable for safety including adherence to all OSHA requirements on existing and purchased equipment (machines). Responsible to audit safety compliance based on established procedures. Develops PFEMA analysis for primary processes and new programs
  • Responsible for molding machine and auxiliary/secondary equipment selection, justification, & acquisition. Responsible verification, validation and establishing process for new equipment & molds with control guidance for manufacturing, insuring that processes and products released to manufacturing meet established product specifications. Integrates with quality and manufacturing to ensure process monitoring & audits result in product conforming to specifications. Responsible for assisting in mold selection and maintenance, working with tool room management to define P/M and mold maintenance requirements
  • Responsible for annual CIP as it relates to scrap, productivity and associated cost reductions. Investigates and participates in process to establish goals and implementation for reduction in scrap, improved productivity, and quick change over processes, etc. Establishes practice to manage, monitor and react to processes that are out of tolerance
  • Lead and manage mold builds, modification and repair work with internal and external vendors
  • Responsible for preparing tooling specifications, RFQ’s with updated and/or new drawings and specifications including GD&T
  • Interact with tooling vendors, sourcing, product management, etc. to obtain quotes, award PO’s, approve tool designs and coordinate the actual tool construction on time and on budget
  • Perform needed capacity studies, press loading etc…
  • Establish optimal cycle times for all tools, develop and maintain cycle time chart for all tool
  • Establish Process Monitoring and assure that it is being completed
  • Assist and support other Plant Management team members as required
125

Tech-pvd Process Engineering Resume Examples & Samples

  • Review Statistical Process Control charts for process quality and react to Out of
  • Control conditions including defect troubleshooting
  • Use standard software applications (MS Office) and specific programs (X-site, Space, Fabgui applications) creating reports and documenting procedures
  • High School Degree (or equivalent GED)
  • Able to perform work in a standing position for majority of a 12 hour shift (excluding breaks) Preferred Qualifications
  • Ability to handle multiple tasks simultaneously and prioritize activities · Strong team player with ability to work well within a global team
126

Process Engineering Specialist Resume Examples & Samples

  • Maintain reliable and safe manufacturing systems while improving production rates, inefficiencies, yields, costs and changeovers
  • Develop innovated solutions and improve process capability and production volume while maintaining and improving quality standards
  • Assist with shop floor activities (changeovers, equipment breakdown resolution) that arise from or are causing and adverse supply condition towards the customer
  • Ensure projects are completed on time and financial budgets are followed
  • Work closely with the Quality and Production to review and approve operating, set up, and inspection instructions and verification documents
  • Support product/process change activities through Change Management system
  • Engineering Foundation Competencies
  • In-depth knowledge of manufacturing processes and equipment used
  • In-depth knowledge of industry and quality standards and SPC methodologies
  • In-depth knowledge of materials and components used in the process
  • Excellent customer contact, negotiation and problem resolution skills
  • Good presentation, database management and computer skills
  • Strong knowledge of statistical process control methods and techniques
  • Evaluate results and recommend solutions to improve the processes
  • Ability to evaluate, diagnose and troubleshoot problems
  • Ability to evaluate materials, gather and analyze data and determine root cause of problems
  • Ability to manage several projects simultaneously and coordinate multiple, changing deadlines
  • Ability to effectively communicate with a variety of internal and external customers
127

Business Process Engineering Lead-VP Resume Examples & Samples

  • Perform in-depth operational analysis of business processes to optimize the use of technology and enhance data management controls and data accountability standards
  • Work with production process owners to understand business needs and implement changes to current business processes
  • Act as group liaison to support appropriate prioritization of technology initiatives
  • Perform analysis and communicate financial reporting needs to project teams and stakeholders
  • Administer documentation of requirements, comprehensive test plans, and acceptance testing
  • Define and identify key measures and performance metric targets
  • Establish and track project timelines and milestones
128

Process Engineering Specialist to Akzonobel Stenungsund Resume Examples & Samples

  • Lead and or participate in development and improvement projects
  • Function as process engineering expert leading to new products and process developments
  • Coordinate and lead global joint development projects with universities, institutes and other parties within and outside AkzoNobel
  • Initiates new research, development or improvement projects
  • PhD in Chemistry, Chemical engineering or related field and 2 years of experience within process engineering
  • Or Master in Chemistry, Chemical engineering or related field and minimum 5 years of experience within process engineering
  • Be able to travel (30%)
129

Director, Process Engineering Resume Examples & Samples

  • Provides expertise and guidance in establishing processes with partnership with finance
  • Responsible for documenting and providing recommendations to existing processes to mitigate risks and ensure controls compliance
  • Manages the validation of processes through validating and observing effectiveness to develop governance recommendations for execution improvements
  • Partners in the development of Plan to Perform and other process standards and enablers for U.S. Finance
  • Responsible for communicating and facilitating discussions following finance process reviews to identify gaps in process design and/or execution. Shares learnings with executives across the organization to incorporate learnings into process improvement and prevent risks
  • Establishes and maintains working relationships across all functional areas in order to understand business needs and identify other opportunities for process improvement
  • Partners with Corporate Finance and other Finance leaders to ensure key outputs of the company’s strategic plans are embedded into core processes
  • Responsible for process documentation and working with the business to ensure proper implementation of controls throughout finance
  • Partners with key functional leaders in addressing cross-functional process interdependencies. Documents objectives, cross-functional intersections, execution steps and escalation protocols
  • Serves as facilitator and champion for process improvement across the company. Coaches and supports colleagues in process improvement activities and targets
  • Provides counsel to employees, manages third party consultants and contractors, and advises senior leaders as necessary
  • Builds and manages results-driven teams by taking a strategic and technical view of performance management by involving employees in planning, relationship building, decision-making, forecasting, and analysis processes
  • Governance strategies and financial processes
  • Process simplification
  • Financial process audit
  • Risk mitigation
  • Effective business partnerships
  • Project timelines with competing priorities maintenance
  • End-to-end process review and management
  • Bachelor’s Degree; Master’s preferred, with a minimum of 10 years in finance roles with increasing scope and leading financial processes
  • Experience in financial management, control establishment/documentation and audit experience
  • Ability to build cross-functional relationships and develop company finance policies
  • Demonstrated experience with process/controls implementation
  • Knowledge of common utility Finance practices
  • Experience in finance systems and business process
  • Financial acumen and analytic skills
  • Strong ability to work across department and geographic boundaries
  • Ability to manage competing priorities through effective planning and execution skills
  • Ability to develops others
130

Process Engineering Manager Resume Examples & Samples

  • Assess manufacturing and business process efficiency & performance, and identify opportunities for improvement
  • Develop business cases & charters, and establish financial & non-financial project goals
  • Lead change management activities (create transition plans from current to future state and execute accordingly)
  • Manage people & initiatives to ensure proper achievement of results
  • Develop & execute action plans to achieve strategic goals
  • Provide expertise to teams including
  • Apply Continuous Improvement methods such as Lean, problem solving, SMED, etc
  • Subject matter expertise in Lean and/or Toyota Production System [TPS], especially with Lean principles of teamwork, methodology, business benefit, innovation, and customer focus
  • Application of Six Sigma methodologies
  • Lead transformational change and work on identifying greatest Lean opportunities across the plant
  • Coordinate benchmarking & external analysis (Subject Matter Experts, Workshops, company visits, etc.)
  • Identify & share best practices
  • Teach & coach others in Lean tools, i.e. problem-solving & standardizing work
  • Educate, communicate, and excite the organization on Lean Manufacturing Concepts
  • Develop & lead teams to embrace a practice that promote best practice sharing across the plant and by integrating continuous improvements
  • Willingness to work on the shop floor and lead by example
  • Demonstrate ability to influence decision making, facilitate groups with diverse perspectives, bring teams to agreement, display high tolerance for ambiguity, etc
  • Develop and execute the annual Capital Expenditure budget plan
  • Coordinate the improvement of the manufacturing processes to improve productivity
  • Utilize Lean Manufacturing concepts & Six Sigma concepts to improve productivity & quality
  • Improve equipment throughput & uptime
  • Implement processes to improve Safety in manufacturing with proactive equipment improvements and engineering through process & equipment hazards in the work place
  • Identify & coordinate projects that support the manufacturing group
  • Support quality improvement initiatives with proper tooling, job set-ups, & work instructions
  • Achieve the OpEx cost out targets & achieve annual departmental budget
  • Bachelor's degree in an Engineering-oriented discipline
  • 12 years of professional experience working in Engineering and/or Manufacturing roles
  • 5 years of professional experience working with Lean Manufacturing and/or Toyota Production Systems (TPS)
  • 2 years of professional experience managing teams in manufacturing environments
  • Master’s Degree in an Engineering-oriented discipline
  • Extensive managerial experience with Manufacturing Engineering and/or Industrial Operations teams
  • Strong experience working in a regulated, process-driven manufacturing environment (especially with leading Continuous Improvement and/or Process Improvement teams)
  • Kaizen Certification
  • Strong interpersonal and communication skills that build productive relationships and influence others, both within the business and across organizations
  • Ability to interact with all levels of the business (senior leaders to working teams), exceptionally good listening skills, and ability to present complex or new ideas with clarity & simplicity
  • Ability to collaborate effectively with others in the spirit of common objectives
  • Solid business acumen
  • Able to deliver results despite shifting environment
  • Analytical Problem-Solving skills: must be able to identify problems and apply structured / disciplined methodology to identify root causes using data
  • Innovative and effective solution development skills (including risk mitigation & execution)
  • Hands-on experience with most of the following Lean Problem-Solving tools: DMAIC, Voice of the Customer, benchmarking, quality function deployment, control charts, standardizing work, etc
131

Process Engineering Technician Resume Examples & Samples

  • Owns well-defined tasks, with supervision
  • Supports troubleshooting
  • Able to execute on written instructions as provided by supervisor
  • Provide support for stocking lab supplies and maintaining lab equipment as instructed by supervisor
  • Works effectively in team environment
  • Establishes relationships with immediate project team and function
  • Knows who the internal customers are, and is aware of their needs and expectations
  • Communication of observations, technical findings and progress to supervisor and immediate project team
  • Acknowledge communications/instructions are understood, and seeks clarification when required
132

Senior Specialist, Process Engineering Resume Examples & Samples

  • Work as a lead Process Engineer to manage key Client-facing processes in accordance with the Enterprise Process Management framework, with the objective to continuously identify and drive process improvements
  • Work on a wide-range of short-term to complex/longer term business projects with a goal to realize defined project benefits through process improvements
  • Act as a resource to business units by identifying, planning and implementing process engineering projects
  • Actively lead teams and apply Six Sigma, Lean, Project and Change Management concepts and tools at every stage of process/project management to solve problems that result in realizing process improvement benefits
  • Work with people at all levels in the organization in the development and execution of process management and/or process re-engineering projects
  • Provide management with status updates, feedback and appropriate reporting on selected projects
  • Work with other Process Engineers to maximize understanding and improvement efforts, sometimes requiring to train on process engineering methodology and tools as required
  • Train and mentor associates in process engineering philosophy and methodologies
133

Process Engineering Co-op Student Resume Examples & Samples

  • Utilize Safe Production tools and exhibit behaviors of Safe Production
  • Assist in the duties related to the execution of the Start-up and Inventory Build-up Plan. This may include work on a project to relocate residue from our Hydromet Demonstration facility to the large, plant scale Residue Storage Area
  • Develop reporting tools to identify process improvement opportunities
  • Assist with projects to fix identified problems during start-up activities
  • Manage assigned projects in a manner that meets quality, time and resource requirements
  • Previous work experience in an industrial setting would be an asset
  • Able to work with various groups to gather and access a large amount of technical information in the form of engineering specifications and drawings; and vendor specifications and recommendations
  • Knowledge and experience in windows based applications are essential
  • Strong organizational, interpersonal communication, analytical and problem solving skills and a proven safety record are essential
134

Process Engineering Manager Resume Examples & Samples

  • Establish and lead plant safety objectives
  • Ensure compliance to all safety policies and procedures
  • Provides direction, coaching, and training for all quality and engineering team members and ensures they work safely
  • Utilizes process control methodology (Six Sigma, SPC, Designed Experiments, etc...) to solve problems and improve process control and capability
  • Supports the efforts of the process engineers in investigating and resolving quality issues, making recommendations for preventive action, optimizing current products and processes and commercializing new products
  • Develop and maintain systems including performance measurements, failure costs, control systems, quality standards, product and process capability for all raw materials and finished products by utilizing such tools as statistical methods, pareto charts, flow charting and failure mode effects analysis
  • Establish and maintain a process and quality assurance audit function to ensure compliance to standards and specifications.Develop corrective action plans and systems
  • Direct efforts in gaining and maintaining knowledge of trends in the industry that lead to improvements in product quality, product consistency, process efficiency or cost reductions
  • Define process specifications, which include operating conditions, set points, tolerances, processing procedures and packaging specifications, based on a strong understanding of customer requirements
  • Assist in preparation of capital expenditure requests to improve existing operations, increase efficiencies, improve product quality or commercialize new technologies
  • Work closely with Customers, Marketing, Development and Manufacturing to deliver new products to the market
  • Lead operational excellence and continuous improvement process and projects for the site
  • Lead and support the effective implementation of investment projects approved for capacity or facility expansion and upgrades
  • Ensures plans are in place to meet all performance indicator targets/goals
  • Serves as a resource on FMEA's, Change Management, Designed Experiments, Six Sigma, and other process control tools
  • Interfaces with multiple functions and customers to resolve problems, respond to customer complaints, develop corrective actions, develop new products, and improve existing processes
  • Six Sigma Green Belt required
  • Six Sigma Black Belt strongly preferred
  • CPM preferred
  • Minimum of seven years in Process, Maintenance or Operations roles in a manufacturing environment (preferably in extrusion, textile or paper)
135

Process Engineering Manager Resume Examples & Samples

  • Provide process engineering technical supervision to the other process engineers and to ESD. Assist engineers with process issues. Oversee all projects in ESD to assure appropriate process engineering techniques are being applied
  • Provide process engineering support to Production, Maintenance, Research & Development and Environmental Health and Safety departments as necessary
  • Process Engineering and management of plant improvement and environmental projects
  • Assist with the development and training of the other process engineers that will allow these people to quickly learn AMRI’s preferred methods and produce uniform output
  • Team leadership of special projects not limited to engineering
  • Supervision of engineering firms/contractors as required
  • Participate in self-development activities and training of others
  • Complete the Process and Process Safety Engineer Core Competency in the Learning Management System
  • Exhibit safety awareness and safe work practices. Protect employees and visitors by maintaining a safe and clean working environment
  • BS in chemistry. chemical engineering or related area
  • Minimum of 10 years’ experience in process engineering in pharmaceuticals, specialty chemical or related industry
  • Strong knowledge chemistry and unit operation
  • Supervisory or Leadership experience
136

Process Engineering Manager Resume Examples & Samples

  • Manage a team of about 15 Process Engineers and Engineering Techs on process improvement projects to improve quality, increase yield, improve safety, and reduce cost for the General Assembly manufacturing line
  • Set priorities for the team based on Production or business needs, as well as on data analysis of build quality, efficiency, rate, and cost, in order streamline and improve General Assembly as a whole
  • Drive projects to balance processes, improve tools, manage the order of operations, optimize labor training and utilization, reduce waste, and reduce variability. Align projects to drive General Assembly goals by reducing total number of defects and defects per vehicle, hours of labor per vehicle, safety incidents, and vehicles produced per hour
  • Work cross-functionally with Manufacturing, Pilot Associates, Design Engineering, NPI, MRB, and other teams to define, qualify, and track new or modified processes and all associated work instructions, equipment, tools, materials, and training
  • Manage supporting activities for Engineering and Manufacturing including 5S and Lean manufacturing activities, material handling improvements, production line configuration, and safety procedures
  • Ensure processes provide a high level of safety and ergonomic compliance
  • Provide informal leadership and drive collaboration and prioritization with other Process Engineers within General Assembly and other teams
  • Ability to mentor and develop a strong team through selective recruitment, thorough and consistent on-boarding process, training, and coaching, and identification and addressing of competency gaps within team. Management of team includes proactively planning for labor needs in light of production ramp up, communicating job expectations, performing employee performance and objectives reviews, and managing team in alignment of company policies and procedures
  • BS degree in IE, EE, ME, or equivalent
  • 7+ years of relevant experience in an assembly, manufacturing, or maintenance environment
137

Process Engineering Intern Resume Examples & Samples

  • Participates in the design of a process unit operation, including establishing process design basis, development of options, and optimization of selected design
  • Calculates and organizes data for process flow sheets, including instrumentation and control considerations
  • Must have completed at least 2 years of college in accredited chemical, mechanical, or bio-engineering program
  • This opportunity is anticipated to run from May/June 2017 until August 2017
138

MTS Process Engineering Resume Examples & Samples

  • Minimum of 7 years of Semiconductor Manufacturing experience or equivalent
  • Ability to travel internationally (<5%)
  • Demonstrated ability to work well within a globally matrixed team or environment
139

Process Engineering Intern Resume Examples & Samples

  • Chemical process design including design basis documentation, supporting calculations, and design optimization
  • Development of engineering drawings including Process Flow Diagrams and Piping and Instrumentation Diagrams
  • Development of process specifications for equipment including distillation columns, pressure vessels, pumps, compressors, and heat exchangers
  • Development and maintenance of supporting documentation for Process Engineering design functions (drawing lists, line lists, utility summaries, and related documents)
  • Candidates should be a self-motivated professional going into their junior year, or higher, in college and pursuing a degree from an accredited university in Chemical Engineering
  • Proficiency with Microsoft Office applications is required
  • Experience with process modeling software (Aspen or other) is a plus
  • No relocation or temporary living assistance is being offered*
140

Unit Process Engineering Test Manager Resume Examples & Samples

  • Drive Yield, Cost, Quality and Capacity improvement projects
  • Responsible for new package/process introduction in test line
  • Managing resources and staffing requirement to fulfil project timeline
  • Responsible for staffs career development and skill upgrading in order to enhance team performance
  • Coordinate with Equipment Engineering Group for equipment improvement/efficiency activities
  • Review and revise process control limit, process flow, control plan and FMEA as per required
  • Work on problematic lots – containment and improvement plan
141

Process Engineering Team Member Resume Examples & Samples

  • Experience in one or more of the following technical areas: continuous processing, reaction/crystallization engineering, separation/isolation technologies, drying, fluid dynamics, scale up of pharmaceutical unit operations, process and systems modeling, process analytical technologies & control, material, and physical properties
  • Broad knowledge of process development in support of manufacturing development
  • Proficient in and demonstrates highly effective oral and written communication skills
  • Team player and ability to work in a matrix environment
  • Proven ability to troubleshoot and diagnose problems
  • A working knowledge of organic chemistry
  • A working knowledge of the drug development process including regulatory aspects (preferred)
  • Demonstrated experience in project management and use of risk based approach
  • A working knowledge of Quality by Design (QbD) and GMP principles and their application (preferred)
  • Demonstrated ability to handle several projects in different stages of development at the same time, using initiative and imagination to meet agreed objectives and timelines (preferred)
  • Highly effective interpersonal, organizational, and communication skills for working in a multi-disciplinary scientific team environment (preferred)
  • Deliver process engineering support to development projects as part of the Product and Process Engineering group
  • Participate on multidisciplinary project teams, and collaborate with R&D colleagues to define and implement development strategies according to project timelines
  • Provide proactive chemical engineering solutions for the design and scale-up of both batch and novel continuous manufacturing processes, working alongside R&D scientists and plant process engineers in R&D and manufacturing
  • Evaluate and implement new technologies and ways of working which enhance the performance of plant unit operations
  • Incorporate continuous improvements of chemical and pharmaceutical processes’ manufacturability and sustainability
  • Deliver process models which demonstrate optimized engineering configuration of plant and maximize chemistry potential
  • Support New Chemical Entities development and transfer of processes to commercial manufacturing facilities via process engineering activities within project teams, and delivering specific project solutions
  • Effectively contribute to the development of end-to-end process understanding and control of the manufacturing process, by integrating broad knowledge of each unit operation
  • Organize, evaluate, and present data in an effective and scientific manner
  • Contribute as necessary to regulatory dossiers, expert reports, and SOPs
142

Process Engineering Resume Examples & Samples

  • Lead monitoring, auditing and reporting of site process through use of metrics
  • Lead new and existing process development, implementation, and controls in support of Plexus and customer specific needs at the site
  • Lead implementation of user group standards across the site and support user group projects on specific processes as required
  • Mentor and train individuals in various processes, required tools, and philosophies
  • Support DFx development on new and existing customer projects and RFQ's
143

Process Engineering Intern Resume Examples & Samples

  • Assist in final assembly of Seagate-designed assembly automation equipment
  • Perform experiments to determine parameter settings and/or product design specifications to optimize quality and manufacturability of hard drives
  • Collect and analyze data to qualify the equipment, validating it meets pre-defined requirements
  • Highlight any gaps where requirements are not met and work with the design team to identify solutions
  • Contribute data and experiment results to the final qualification package so the machine can be transferred to the volume factory to be put into service
  • Currently pursuing a BS in Mechanical Engineering, having completed junior year of study
  • Experience with spreadsheet software, e.g. MS Excel or Google Sheets
  • Experience with presentation software, e.g. MS Powerpoint or Google Slides
  • Strong commitment to excellence
  • Good ability to work as part of a larger team
  • Available to intern Summer, 2017 (May-Aug)
  • Currently pursuing a MS in Mechanical Engineering
  • Experience with statistical analysis software such as JMP or MiniTab
  • Experience with SolidWorks CAD software
  • Self-motivated and meticulous
144

PEE Process Engineering Manager Resume Examples & Samples

  • A minimum of 3 years of M1 leadership experience
  • A record of performance excellence for current position and be recognized as having demonstrated successful leadership characteristics both in present and past
  • Been seen as an excellent mentor by your peers, a strong team builder, motivator, and as a leader in benchmarking the values of Leadership, Execution, Teamwork, Professionalism, Commitment and Continuous Improvement
145

Process Engineering Intern Resume Examples & Samples

  • Collects and prepares data for evaluation
  • Examine Project documents for completeness and accuracy
  • Currently enrolled in an Engineering or Construction Management curriculum is required
  • Excellent communication and interpersonal skills is required
  • Must have complete as least 2 years of college to be considered
146

Process Engineering Intern Resume Examples & Samples

  • Participates in new product development, including influencing the design of the microcircuits
  • Develop metallic and non-metallic joining techniques: solder, epoxy and eutectic die attach
  • Perform manufacturing experiments; Interpret, analyze, and report results
  • Develop plasma, microwave plasma or RIE cleaning techniques
  • Develop gold wire, ribbon or mesh bonding processes
  • Design tooling for assembly processes and products using Creo 3D
  • Create automated assembly programs using Creo 2D, and write procedure documentation
  • Create a department website with inputs from engineering, operations and other business partners
  • Investigate and recommend Automated Optical Inspection equipment for a wide range of products
  • A proactive team player who thrives on delivering solutions
  • Demonstrated track record of learning new concepts and theories
  • Demonstrated leadership and ownership
  • Strong teamwork, interpersonal skills and follow-thru
147

Senior Process Engineering Manager Resume Examples & Samples

  • Utilize Lean principles to drive global continuous improvement initiatives for functional tower including process, systems, and data
  • Drive the business process transformation roadmap and project portfolio
  • Collaborate across functions and sites to harmonize requirements and solutions
  • Collaborate with Process Engineers and Program Managers to provide requirements (Mission, Measures of Effectiveness, Environment, Constraints, Baselines)
  • Recommend solutions and consolidate / streamline processes to improve integration and Finance objectives, design and execute testing strategies and plans
  • Minimize the customization of solutions
  • Achieve a high level of standardization in systems and processes
  • Help drive stakeholder engagement and organizational change management with impacted business areas
  • Coordinate and support special projects as needed
  • BA/BS or Master’s degree in Business, Supply Chain, Industrial Engineering or Management
  • 8 - 10 years of experience in leading process improvement projects or facilitating Value Stream Mapping and Kaizen events required
  • Organizational Agility with Stellar Communication Skills
  • Team Ambassadors with Strategic & Visionary thinking
  • Prior experience in leading process improvement projects and driving/ participating in Value Stream Mapping exercises and / or Kaizen events
  • Black Belt Certification desired
148

Process Engineering Manager Resume Examples & Samples

  • Lead technical team to evaluate production and field failure key performance indicators (KPI’s) to identify quality trends, design issues and supply chain process gaps
  • Develop and deploy globally consistent manufacturing processes and tools
  • Communicate effectively with end users who may not have the technical knowledge of the product
  • Prepare and share reports to drive corrective action
  • Log all incidents of failure with accurate details that will allow for further analysis if needed
  • Investigate and problem solve all incidents that may lead to future errors
  • Provide measures to improve the efficiency and effectiveness of supply chain through continuous involvement in the research and development process
  • Bachelor’s degree in an engineering disciple is required
  • Minimum of 5 years of leadership experience in Supply Chain Operations environment
  • Lean and/or Six Sigma proficiency desired
  • Well versed with various systems, tools, and procedures in industrial design and optimization
  • Proficient with many applications used for database management and reporting
  • Effective in communication, problem solving and aping experience to relevant situations
  • Able to work in large teams as well as contribute as an individual for quick execution of projects
  • Handle working in a fast-pace environment with continued dedication for achieving desired results in a timely manner
149

Process Engineering Technician Resume Examples & Samples

  • Sustaining in 6” fab with focus on Masking module (Litho and Etch)
  • Support manufacturing metrics by dispositioning discrepant material, addressing rouge tools and provide support during swing shift (3:30pm to 12am)
  • Monitor and respond to SPC trends to ensure quality moves
  • Determine root cause of process issues and make improvements
  • Support metrology program creation and specs edits
  • Support continuous improvement efforts to enhance process control, yield, and productivity and reduce cost
  • Make effective use of data analysis tools for problem solving and informed decisions
  • Participate in cross functional teams, mentor and act as a resource for operators
  • BS degree in Engineering or science-related major is preferred
  • Knowledge of semiconductor processing in Litho and Etch with basic understanding of device physics and materials
  • Ability to work independently and multitask in fast paced production environment
  • Strong analytical and problem solving skills with proficiency in statistical methods and experimental design analysis
  • High degree of initiative with strong work ethics
  • Excellent attention to details with good written & verbal communication skills
150

Process Engineering Technician Resume Examples & Samples

  • Maintain and troubleshoot established product related customization equipment and applications to support the fulfillment and return process
  • Update, maintain and test TSQL/Access scripts and queries related to product and software changes
  • Key team member on new product launches and enhancements for North America
  • Conduct product testing and repair as instructed by R&D, Quality, and Engineering teams
  • Aid in implementation of work instructions, tools, fixtures, and or gauges needed to support fulfillment and return activities
  • Work with Quality/Production to create procedures, flow charts and training aids
  • Participate in training personnel on new products and processes
  • Special projects as assigned by Engineering Manager
  • 2+ years experience working in a product related, technical support environment
  • General understanding of schematics, technical diagrams and product release processes
  • Basic knowledge of TSQL/Access scripts and queries
  • Proven ability to manage tasks independently to achieve results
  • Knowledge in Outlook, Word, Excel, PowerPoint and Visio
  • Good organizational and written/verbal communication skills
  • Associates degree/certifications preferred in related field
  • Communicative
  • Knowledgeable
  • Team Oriented
151

Process Engineering Technician Resume Examples & Samples

  • Perform daily routine checks and qualifications on equipment
  • Perform designated machine calibrations
  • Troubleshoot out of control tool and product issues
  • Write and/or modify operating specifications
  • Document new and edited recipes
  • Generate a detailed passdown for the oncoming shifts and engineers
  • Ability to execute numerous tasks simultaneously in a high-paced production environment
  • Strong computer skills and ability to use spreadsheets
  • Understand process flows in manufacturing
  • Ability to apply concepts such as fractions, percentages, ratios, proportions and analysis’ to practical solutions
  • Ability to effectively present information to management and employees. Ability to write correspondence, speeches and articles for publication that conform to prescribed style and format
  • Ability to work with mathematical concepts such as probability and statistical inference, fundamentals of plane and solid geometry, trigonometry, and calculus
  • Experience writing and/or conducting Design of Experiments
  • Experience programming and maintaining automated manufacturing equipment and machinery
152

Global Process Engineering Resume Examples & Samples

  • Support the preparation of engineering design basis and specifications, Process Flow Diagrams (PFD) and P&ID’s, equipment and instrumentation list, and manufacturing procedures for new production processes by utilizing processing methodology and following the SCJ Engineering Work Process
  • Support new commercially available processing & utility equipment and technology that serve S. C. Johnson’s global business plan
  • Provide technical guidance and recommendations to regional engineering sites for installing and qualifying new manufacturing processes
  • Support process engineering design activities for the manufacturing facilities, which including major capital projects, equipment upgrades, facilities expansion and/or upgrades, major equipment and system purchases and installations
  • Develop and implement Process Engineering design and equipment standards globally to supports the S. C. Johnson standardization initiative
  • Project Management – Develop project plans and communicate status changes and risks throughout the project
  • Minimum 3 years’ experience in the CPG, Food/Beverage, or Pharmaceutical Industries is expected
  • Experience in leading Safety, Health and Environment activities is preferred
  • Previous Project Management Experience a plus
  • Previous Manufacturing Experience a plus
153

Global Process Engineering Manager Resume Examples & Samples

  • Lead the preparation of engineering design basis, specifications, equipment and instrumentation list, flow charts, P&ID’s and manufacturing procedures for new production processes, utilizing Early Management tools and methodology, following the SCJ Engineering Work Process
  • Identify new commercially available processing equipment and technology that serve the company global business plan
  • Provide technical guidance and recommendation to the regional manufacturing sites for qualifying new equipment and manufacturing processes
  • Drive the development and implementation of process engineering design and equipment standards and specification globally
  • Review project proposals or plans to confirm engineering design viability
  • Investigate, drive, and assist in implementation of cost saving projects, process optimization, productivity improvements related to existing processes and support systems globally
  • Be a member of technical review committee of product commercialization
  • Manages major capital projects, equipment upgrades, facilities expansion and/or upgrades, major equipment and system purchases and installations for Factory of the Future strategy
  • Must be able to travel domestically and internationally up to 25% of the time
  • Teamwork - Balances team and individual responsibilities which fosters group commitments to goals and objectives
  • Experience coaching, training and building capability with multiple levels within a manufacturing organization including engineers, cross functional experts, technicians and professionals
  • Continuous Improvement – Identifies and drives improvements in cost, safety and productivities utilizing Total Productive Maintenance and Early Management methodology
  • Business Acumen - Understands business implications of decisions; aligns work with strategic goals
  • Planning/Organizing - Prioritizes and plans work activities, sets goals and objectives
  • Innovation - Displays original thinking, creativity and resourcefulness which generate innovative approaches and ideas
  • Ability to lead through influence, manage through ambiguity, and demonstrate courage as required
  • BS in Chemical Engineering degree is expected
  • 7-10 years’ experience in position of increasing responsibility and breath within engineering or manufacturing in the CPG, Food/Beverage, or Pharmaceutical Industries is expected
  • The experience in managing large capital projects ($10 MM) is expected
  • PSM (Process Safety Management) experience is required
  • Previous international work experience is strongly preferred
154

SMT Process Engineering Analyst Resume Examples & Samples

  • Assist with SMT application notes for new packages
  • Assist with the analysis of package shear data
  • Assist in updating technical documentation
  • Perform other duties/projects as assigned
  • Pursuing a degree in Mechanical, Industrial, Manufacturing or other related engineering field
  • Knowledge of Surface Mount Technology and oven reflow profiling
  • Knowledge of PLC’s (Nice to have)
  • Experience using MS office (Word, Excel and Power point)
  • Knowledge of statistics and statistical process controls (SPC)
  • Good organizational, written, and verbal communication skills
155

Business Process Engineering Specialist Resume Examples & Samples

  • Participates in analysis of existing methods to promote effective operations through standardization, improvement, simplification, discontinuance, or other methods
  • Participates and or supports Quality management in recommending business processes that ensure alignment with strategic direction; integrates business processes between multiple organizations
  • Participates in the coordination of business process changes, assists in implementing system solutions
  • Independently performs important areas of standard professional level work that typically requires processing and interpreting, more complex, less clearly-defined issues. Refers semi-complex, unusual problems to others or management. Identifies and resolves readily identifiable, clearly-defined problems
  • Coordinates, maintains and drives the documentation of Quality Dashboard activities through collaboration with Quality representatives
  • Participates in Document Management administration duties, such as reviewing, posting and maintaining document records
  • Leads and or participates in internal audits and supports external audit activities
  • Leads efforts to maintain internal Quality intranet through collaboration with Quality Teams
  • Performs advanced areas of work for the professional field. Able to manage multiple projects, communicate updates, and meet milestones in a timely fashion. Displays a high level of critical thinking in bringing successful resolution to high impact, complex, and/or cross functional problems
  • Demonstrates a good grasp of Quality Systems knowledge and principles of field of specialization and applies through successful completion of assignments. Successfully applies knowledge of fundamental concepts, practices, and procedures
  • Typically 2-5 years of successful experience in related field and successful demonstration of Key Responsibilities and Knowledge as presented above. Advanced degree MAY be substituted for experience, where applicable
  • Travel 20% (domestic only)
  • LI-WMC
156

Quality & Process Engineering Manager Resume Examples & Samples

  • B.S. degree in Engineering from an accredited institution
  • Minimum 5 years engineering experience in a manufacturing environment
  • Proven Leadership, Excellent Communications and employee engagement skills
  • Must maintain high level of proficiency with GD&T B/P (ASME Y14.5) interpretation Working knowledge of SPC
157

Head of Nuclear Process Engineering Resume Examples & Samples

  • Lead the development of a strong team to whom you will provide leadership and robust management
  • Strengthen the AECOM Process Engineering offering
  • Successfully deliver the process engineering aspects of projects and work packages
  • Undertaking a business development role
  • Act as first point of direct contact with clients, partners and contractors
  • Provide strategic guidance
  • Act as the custodian of resource and expertise
  • BSc /BEng Chemical Engineering (Hons)
  • Chartered Member of the Institution of Chemical Engineers
158

Materials & Process Engineering Intern Resume Examples & Samples

  • Under limited supervision, working on non-routine projects with general instruction and advanced projects with detailed instructions
  • Participates in the day to day activities of assigned functional area assisting in the completion of non-routine and advanced tasks
  • Assists in applying knowledge to analyze, investigate and resolve non-routine problems
  • Assists in developing electronic and hard copy reports, records, diagrams and charts
  • Expected to work in a safe manner in accordance with established operating procedures and practices
  • Additional Functions Other duties as assigned or required
  • Typically requires enrollment as an undergraduate or graduate student at a recognized college or university
  • Students pursuing degrees in Material Science or Mechanical Engineering desired
  • Ability to understand new concepts and apply them accurately
  • Ability to follow general and detailed instructions as well as organizational policies and procedures
  • Good communication and interpersonal skills to enable effective interface with internal professionals
  • Must be enrolled in at an accredited college or university
  • Students set to graduate in Fall 2017 or Spring 2018 preferred
  • Minimum 3.0 GPA desired
159

Process Engineering Manager Resume Examples & Samples

  • Provide technical and strategic leadership to AME Team to achieve operational and business goals
  • Support Stanley Black & Decker Operational business metrics for Safety, Quality, Service and Cost
  • Support manufacturing plant capital projects with financial and technical expertise
  • Introduce near-neighbor industry process technologies to improve mature manufacturing processes
  • Support and expand Lean culture throughout the Stanley Black & Decker manufacturing network
  • Working knowledge of manufacturing processes. (e.g., investment casting, MIM, plastic injection molding, machining, assembly, stamping, etc.)
  • Working knowledge of Quality Systems, Six Sigma, PPAP, capability studies and statistical process control
  • Provide leadership support of lean production principles to create or improve material flow
  • Effectively coordinate with cross functional groups (product engineering, Marketing, finance, EH&S, purchasing, operations) and divisions within Stanley Black and Decker to align activities with business objectives. Insure business buy-in with strategic projects
  • Insure project completion achieves safety, time, performance, quality, cost commitments
  • Meet or exceed customer requirements for all initiatives
  • Establish AME Team priorities, activities/assignments
  • Continually seek new technology opportunities
  • Work closely with product engineering and global manufacturing teams to develop new processes
160

Process Engineering Technician Resume Examples & Samples

  • Assists with customer presentations and interfaces with customers
  • Assists engineers with outside third party developments
  • Organizes documentation (specifications, schematics, and procedures)
  • Develops of tests per customer specifications
  • Associate's degree in a related field OR equivalent experience
161

Process Engineering Manager Resume Examples & Samples

  • Bachelor degree or above majored in process engineering/technology discipline; Chemical Engineering or Chemistry
  • Above 5 years working experiences in relevant MNC or JV in the automated chemical process industry, familiar with automatic/batch production, experienced on TPM & project management
  • Fluent in both written and oral English
162

Process Engineering Manager Resume Examples & Samples

  • Provide daily updates to management on job status of all work in progress
  • Coordinates the flow of work in the department
  • Assures all work areas are properly staffed and used in an efficient manner
  • Documents all activities that occur on the shift such as job progression, operational problems or personnel issues
  • Assists in resolving mechanical problems
  • Interprets and enforces company policies and safety
  • Acts as a proactive initiator of change for improved production methods
  • Leads, gives direction to and monitors work assignments of shift personnel
  • Maintains accurate overtime and attendance records
  • Personal and regular interaction with operators on production requirements
  • Perform book checks as needed with operators
163

Semiconductor Process Engineering Manager Resume Examples & Samples

  • *Bachelor's degree with seven years of relevant experience including prior experience with semiconductor process engineering and device fabrication
  • *Must have team leadership and/or management experience
  • *Must be able to obtain and maintain a DoD Secret clearance (requires US citizenship)
  • *Bachelor's degree in Electrical Engineering, Chemical Engineering , Material Science, Chemistry, Physics or a related technical area
  • *Master's degree
  • *Specific experience with semiconductor processes engineering areas of DUV and I-Line Photolithography, E-Beam Direct Write Lithography, Mask Making, Plasma Etch, Chemical Vapor Deposition, Ion Implant, Solvent and/or Acid Clean
164

Principal Technician Process Engineering Resume Examples & Samples

  • Operate and qualify state of the art 300mm semiconductor equipment (Defect SEM, Bright Field & Dark Field Scan Tools, Bare Wafer Scan Tools, Macro Inspection Tools and E-Beam Scan Tools)
  • Perform visual inspections (quality check)
  • Use standard software applications (MS Office) and factory specific programs (Xsite, SiView, SPACE etc.) creating reports and documenting procedures
  • Perform engineering experiments by following instructions
  • High School degree or equivalent with 6 years of relevant experience (semi-conductor, manufacturing or Lab experience)
  • Associates Degree in a technical field
165

Process Engineering Leader Resume Examples & Samples

  • Follow Arconic’s EHS requirements along with all department specific safety requirements
  • Oversee the development of standard policies, procedures and practices to ensure customer requirements are met
  • Administer the implementation of process engineering to assure the flow down of industry, customer and corporate standards
  • Drive improvements by promoting best practice methodologies and new technologies
  • Ensure team development by supporting an active training environment
  • Conduct periodic management reviews of the process, monitor the effectiveness of implementation and report results to the staff
  • Ensure timely and effective resolution of issues resulting from internal, peer and external audits
  • Provide process support for Process Engineers
  • Participate in daily management meetings by providing information and data analyses and taking action from the results
  • Must have the ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public
  • Ability to learn new software applications and to write machine specific programs
166

Technology & Process Engineering Trainee Resume Examples & Samples

  • Students of Engineering, Technologist or Mechanical Technician careers, with availability for 2 years of contract and graduation from December / 2018
  • Mandatory Office Package intermediate domain
  • Basic level of English (compulsory)
  • Availability to train for 6 hours. Daily
  • Good organizational skills
  • Interest in learning constantly
  • Analytical guidance
167

Process Engineering Lead Resume Examples & Samples

  • 5 years of experience in petroleum refinery or chemical manufacturing facility
  • Experience in multiple refinery, petrochemical, or polymer process technologies
  • Bachelor’s degree in chemical engineering from an ABET-accredited program
  • 5 - 10 years of experience in a petroleum refinery or chemical manufacturing facility
  • Experience in process safety principles application
  • Experience in a Staged Gate project execution and implementation processes
  • Experience in Turnaround process
168

Process Engineering Manager Resume Examples & Samples

  • Provide technical assistance to the manufacturing
  • Serve as clearinghouse of information collected from
  • Automation/Controls Engineering
  • Leadership - Delegation, Mentoring, Evaluating Talent, Communication
  • Managing Work and Direct Reports
169

Process Engineering Internship Resume Examples & Samples

  • Improve productivity by performing ergonomic evaluations, time studies,
  • Simulation, and line balancing
  • Study and improve safety
  • Process documentation
  • Optimize assembly flow and process to minimize People per machine per day
  • Software Programming (LabView, Python, SQL)
170

Manager, Process Engineering & TCS Resume Examples & Samples

  • The purpose of this position is to lead process engineering, quality and operations within the division and in support of product and process development projects primarily directed towards Arconic’s Global Rolled Products (GRP) and Transportation & Construction Systems (TCS) business units. In addition, this position will supervise a technical team of both engineers and technicians to operate pilot lines (state-of-the-art coil coating line; batch surface finishing lines) and divisional facilities, to support the process/product projects within the portfolio, drive continuous improvement principles, and to lead capital projects within the division or in conjunction with R&D projects. The primary functions will be
  • Identify and develop the processes and procedures required for a high through-put and robust manufacturing process, including converting new concepts into actuality through the identification of new processes and their subsequent development
  • Develop and transfer process engineering requirements, including documentation, specifications, and quality standards to support the technology transfer and implementation to internal and external facilities
  • Provide the insight and vision necessary to align with the overall business strategy and meet the manufacturing needs of Arconic’s BU’s
  • Supervise the work of others (Engineers and Technicians)
  • Recognized expert in process engineering, surface finishing processes, equipment (roll coating, electrostatic spray, etc), and technologies applicable to aluminum and other materials
  • Proven understanding of process development and deployment including practical experience gained at an industrial plant level
  • Expertise in process management tools including PFMEA, process control plans, reactions plans and risk assessments
  • Strong problem solving skills including root cause and fault tree analyses
  • Detailed understanding of quality systems, and ABS principles
  • Strong materials, fabrication, chemical, electrical and mechanical experience
  • Background in process control and automation technologies
  • Strong documentation management skills
  • Excellent communication, interpersonal, leadership and organization skills as well as the ability to influence others
  • Experience in Six Sigma is preferred
  • Bachelors Degree in Chemical Engineering, Materials Engineering, Mechanical Engineering, or Electrical Engineering from an accredited institution
  • Minimum of 7 years experience in process development and technology transfer
  • Experience mentoring and supervising the work of others
  • Masters Degree in Chemical Engineering, Materials Engineering, Mechanical Engineering, or Electrical Engineering from an accredited institution
171

Industrial Placement Process Engineering Resume Examples & Samples

  • Provide support to the production teams as required to achieve targets in the area of Safety, Quality, Cost, Cash, Delivery and People
  • Identify and suggest improvements to processes within the factory value stream that include equipment, people, material flow, ergonomics & quality
  • Identify root cause of production opportunities by utilizing formal problem solving techniques and implement action plans to correct
  • Co-lead cross-functional teams to drive the process improvements
  • Perform process trails / characterizations where required
  • Liaise with potential suppliers of equipment and materials
  • Provide training and technical support as required to enhance the skills of operators
  • Create and maintain process documentation
  • Cover Letter outlining your motivation and informing your availability
172

Process Engineering Specialist Resume Examples & Samples

  • Create, Improve and Maintain related core DCP documents for existing and new equipment or processes in your department (continuity must exist between all documents leading back to the Blueprint and the DFMEA without contradictions or inconsistencies)
  • Dynamic Control Plan (DCP), Production Failure Mode Effect Analysis (PFMEA), Process Flow Diagram, Process Illustrations, Process Characteristic Matrix, Error Proofing Matrix, Master Document Control List (MDCL), Operator DCP Check sheets, Operator Instruction Sheets (OIS), Job Safety Analysis (JSA), Process Sheets, Critical to Safety, Critical to Quality, Energy Control Power Lockout (ECPL), Energy Control for Setup and Permitted Minor Tasks (ECSPMT), Tool Sheets and Visual Aids
  • Maintain (per PTME Standards) the Process Capability and Gage Capability matrices (with supporting data) for those processes for which you are responsible. Identify Escalate and Resolve any issues uncovered during the study of process or gage parametrics
  • Develop Repair and Regress Standards and procedures, as well as any Off-Standard procedures
  • Continually Identify projects to improve Safety, Quality, Cost, Delivery as part of ongoing Road Map development for year over year productivity improvements (i.e.: Quality, Cycle Time, Machine Up-Time, etc.)
  • Lead PPAP and MTCs for production parts and process changes. (i.e.: number part print(s); update documents for production and layout; execute functional run off.)
  • Do Risk Assessments for RSIR out-of-print conditions
  • Lead Production and Quality teams with trouble-shooting and problem-resolution of manufacturing quality concerns—if systematic process recurrence
  • Support Skill Trades with troubleshooting equipment to help get it back up and running (including breakdowns and systematic / recurring or intermittent equipment issues)
  • Support the Layout and Gage Repair teams with trouble-shooting and problem-resolution of gages failing routine inspection and masters
  • Update machine drawings with process changes or improvements to DMS
  • Support Finance in conducting Annual Asset Audits for accounting purposes
  • Support QRE to generate WERS alerts for production non-conformance issues
  • Ensure processes, facilities, equipment, and tooling are provided for new programs in accordance with published Powertrain Standards, Strategies, Bill of Process, Procedures and Guidelines
  • Develop and support new model program cost studies and projects
  • Manufacturing Experience with: Lean Manufacturing, DCP, PFMEA, Work Instructions, Reaction Plans, Blue Print Reading, and understanding Tooling, 6-Sigma, PJO (Periodic Job Observation) / Process Confirmation, Standardization (creating, improving & following)
  • Should be able to work Midnights
  • 5+ years’ experience in Manufacturing Process Engineering
  • 1+ years’ experience in MicroSoft Programs (Outlook, Word, Excel, PowerPoint, Project, Access)
  • Bachelor Degree in Mechanical Engineering preferred
  • Experience w/ “Gear” Manufacturing, Tooling, Processes and Facilities
  • Manufacturing Experience with: PPAP, APQP and 8D
  • Strong Machine and Process Troubleshooting Skills
  • Strong background with CNC Programming / Equipment, Robots, Vision / Cameras, CMM’s
  • Working knowledge of PLC’s, Ladder Logic, Siemens, Fanuc, Modicon, etc
  • Ability to operate in stressful situations within timing constraints
  • Strong Skill Set with Minitab (or equivalent statistical software), AutoCad, Strong verbal & written communication, conflict resolution, investigation and presentation skills
  • Ford Systems Experience: MEARS, WERS, CPARS, TWOS, MAXIMO, DocMan, DMS, Q-DASF
  • Successful candidate should be able to demonstrate leadership in One FORD (leadership) behaviors combined with outstanding interpersonal, teambuilding, and communication skill
173

Senior Process Engineering Manager Resume Examples & Samples

  • 10 + years of experience in engineering process development
  • Knowledgeable with medical device regulatory and compliance knowledge
  • Specific and relevant experience in assembly process development, test development, process validation and process transfers
  • Excellent team player; ability to collaborate across boundaries, disciplines, cultures, and levels within the organization
  • Highly motivated, self-started and able to operate both at strategic and tactical, hands-on level
  • Willing to frequently travel on business trips
174

Quality & Process Engineering Manager Resume Examples & Samples

  • 5-7 years of Experience of product/process development or manufacturing experience with technical knowledge and expertise in quality and/or assembly, weld/fabrication, or machining process disciplines required
  • Strong Lean Transformational experience preferred
  • ASQ certification preferred, or ability to pursue over 18-24 months
  • Possess excellent communication skills and effective interface with department members, plant floor employees, suppliers, customers, all other departments within the organization and both technical and non-technical personnel including government personnel
  • Ability to provide effective evaluation of failures, to include root cause analysis, corrective action delivery, global 8D, PFMEA and preventative measure implementation
  • Experience with ISO 9001 Program Compliance a plus
175

Process Engineering Manager Resume Examples & Samples

  • Strong knowledge in mechanical assembly, PCA, SMT and wave solder processes
  • TML and scrap reduction experience
  • New product introduction experience (NPI)
  • English level 90%
  • Minimum 5 years of similar experience
  • Automotive industry background
  • Great leadership and communication skills
176

Intern Process Engineering Resume Examples & Samples

  • Time Studies- as assigned
  • Camstar Database(s) creation- as assigned
  • Effects on Hermeticty/RGA , overbombing, and multiple bombing. Experiment and write report to understand effects. Can be 2- 3 month project. Much may be wait time filled in with other tasks. This may be dependent on skills demonstrated
  • IOL data log review (going through the IOL logs to document the absolute temperature and temperature range)
  • Espec temp cycle capacity. Continuing the work that Josias did
177

Stack Process Engineering Intern Resume Examples & Samples

  • Responsible for projects in Fuel Cell Stack Manufacturing Operations
  • Conduct experiments with manufacturing processes to optimize equipment settings and parameters
  • Conduct experiments with equipment, materials, and fixtures to optimize capacity and product performance
  • Collect and analyze data for both performance and production metrics
  • Create and update documentation for production activities
  • Work with on-site engineer to deliver improvement projects for cycle time and productivity
  • Analyze throughput data, and eliminate bottlenecks from production line
  • Pursuing a Bachelor’s (3rd or 4th year) or Master’s Degree in Engineering, Physics, or Chemistry
  • Experience with experimental procedures and data analysis preferred
178

Process Engineering Resume Examples & Samples

  • Familiarity with IT Service Maturity models, process maturity models, IT assessment concepts and accompanying design and deliver concepts
  • Application of process engineering and business principles into the design and enhancement of new and existing IT processes and services
  • Ability to select, utilize, document, and facilitate process assessments, process flow techniques, and accompanying tools
  • Timely and accurate communication of process engineering efforts and assessments
  • Ability to plan, organize, conduct, and document meetings, multi-day activities, and process mapping activities
  • Ability to deal with ambiguity and disperse working teams
  • Advanced ability in establishing project plans, estimate work, monitor, and report progress against milestones
  • Focus on strategic and tactical issues and how the two interact
  • Demonstrated ability to be detail oriented and have an analytical mind set
  • Possess effective oral and written communication skills
  • Ability to work on multiple projects of moderate size or parts of major projects
  • Assist upper level management and staff as a technical specialist or advisor as needed
  • Fundamental understanding of business principles
  • Bachelor's Degree in Business Administration, Information Technology or the equivalent combination of training, education, certifications, and experience
  • Experience that demonstrates a clear understanding of IT process and service management, engineering, and assessment delivery
  • Adequate research, analytical, and problem solving skills
  • ITIL, COBIT, ISO, and/or SDLC certifications; practitioner with experience preferred
  • Experience with IT service delivery methodologies and practices
  • Presentation skills including reporting, Sharepoint, infographic, and/or video
179

Businesss Process Engineering Lead Resume Examples & Samples

  • Prior experience leading moderately complex to complex process development and implementation efforts
  • Bachelor’s degree or equivalent required, advanced degree preferred
  • Sig Sigma, PMI or related certification a plus
180

Process Engineering Manager Resume Examples & Samples

  • Bachelor of Science Degree in Mechanical, Electrical or Chemical Engineering. Masters degrees preferred in science and business administration seen as a plus
  • Minimum 15 years cement manufacturing plant experience required with Mandatory experience in multiple cement plants, and at the corporate technical level and preferably multiple companies
  • Extraordinary cement process experience and an encyclopedic / thorough technical knowledge of cement manufacturing processes
  • Minimum 10 years field / front line supervisory experience
  • Plant commissioning experience required (>$10 million projects)
  • Demonstration of proficiency and knowledge of kiln/preheater/pre-calciner, raw mill and finish mill operations
  • Process Audit experience, with findings, recommendations and reporting requirements
  • Process design experience and development of SOP’s for process control of pyro, grinding and quality systems
  • Demonstration of a superior ability to develop training programs and teach them, test for knowledge
  • Firsthand experience developing and delivering training programs to a wide audience
  • An unquestionable and demonstrated commitment to safety and knowledge of safety practices without exception, being seen as a leader in safety all activities undertaken
  • Strong written skills are a must as are presentation skills, to mixed groups ranging from hourly employees to senior management. Preferably published as a demonstration of written skill (training, technical documents, etc.)
  • Superb verbal communication skills
  • Clear concise verbal communication in English with executives, co-workers, employees, customers other departments, vendors, individually and in a group setting
  • Entirely at ease with public speaking
  • Examples required demonstrating this skill
  • Strong computer skills. Proficient in Microsoft Office Suite including MS Project
  • Possess excellent interpersonal skills in order to facilitate positive working relationships with all levels of management and staff
  • A demonstrated ability to respond decisively and expediently to issues as they present themselves and to exercise sound judgment in problem solving. Strong analytical and problem solving skills for process systems
181

Process Engineering Lead Resume Examples & Samples

  • Primarily responsible for ensuring the proper design and operation of the production areas and processing engineering support to various functions
  • Lead Site Project Management Team to set direction, formulate strategies and make decisions to ensure the efficient operation of the project
  • Responsible for providing technical input for all production and process activities for the entire plant in the design phase of project
  • Set technical implementation strategy for commissioning and qualification activities
  • Lead all activities during design and start-up phase of new production areas, driving initial commissioning and qualification activities for process equipment
  • Accountable for smooth transition of production areas from design into operational status by providing guidance and direction in trouble-shooting process
  • Participate actively in Factory Acceptance Test (process-critical), Site Acceptance Test, Installation Qualification and Operational Qualification activities for both equipment and Distributed Control System (DCS)
  • Accountable for recruitment, training, building and retaining of high performing process team, whilst establishing technical training program for new staff to build competency and capabilities
  • Ensuring team is working in accordance with health, safety, environment and quality conditions regarding regulations and current guidelines
182

Process Engineering Technician Resume Examples & Samples

  • Must be a U.S. Citizen or have U.S. Permanent Resident status
  • 2 years working with microelectronics processes (epoxy dispense, die placement, wire-bonding, welding, etc.)
  • Experience with various electronics materials (conductive epoxies, non-conductive epoxies, solders, circuit boards, die, passives, etc.)
  • Experience programming process equipment
  • Excellent hand eye coordination
  • Ability to work in a clean room environment
  • Experience with various computer programs and be progressive in learning new programs: Microsoft applications: Word, Excel. 2D drawing programs for programming and setup sheets
  • Proficient with Oracle MRP application – be able to research lot numbers
  • Must be able to quickly adjust activities to accommodate changing priorities
  • Must be able to multitask, and use good judgment to optimize execution of multiple requests
  • Ability to work independently and elicit support and cooperation of co-workers
  • Must be able to follow/interpret/question verbal and written technical requests, understand Cartesian coordinates, be observant, and call for clarification if a problem is suspected
  • Must have good written and verbal English communication skills, be able to write flags or emails clearly communicating technical issues
  • Must have good comprehension skills, read and extract technical information from Process Specs, data sheets, and reports
  • Must have willingness and ability to work extended work day (after the other Associates have left and the machines are free), including occasional evenings and weekends
  • Basic working knowledge of electronic circuits
183

Process Engineering Manager Resume Examples & Samples

  • Supports Operations for all Packaging and Processing areas including Maintenance, Processing, and Liquids
  • Identifies and assigns trained, qualified and quality-oriented personnel
  • Support and enforce HR policies
  • Provides all production team members with constant communication, guidance, coaching and support necessary to perform their jobs effectively and accurately
  • Interfaces with Materials Management as related to raw material inventory control issues
  • Receives and reviews the QA documents for special job requirements and other information to be forwarded to the appropriate team lead
  • Works with the appropriate Project Team(s) to resolve discrepancies and/or issues with control documents, planning schedules, etc in a timely manner
  • Communicates Maintenance support needs to the Maintenance Manager and/or Maintenance Lead prior to job start-up
  • Monitors the timeliness of machine set-ups, validations and/or materials delivery and expedites as necessary
  • Monitors quality, safety and productivity within assigned areas and makes improvements or enhancements as necessary
  • Ensures that Weigh and Dispense Metrics are collected and forwarded for input into the Weekly and Daily Production Reports
  • Oversees all activities performed by operators and technicians during shift
  • Trouble shoots any processing, equipment or utilities problems
  • Enforces strict safety, SOP and GMP compliance within assigned areas
  • Identify staffing needs and maintain staffing as needed
184

Process Engineering Higher Apprentice Resume Examples & Samples

  • Working as part of the Process Engineering team, you will understand how we build our products by spending time on our production lines; spend time with our maintenance team to ensure our production equipment is always operating effectively and continually improve our equipment and processes with the Process Engineers to increase productivity and performance
  • You will spend your first 17 months on a training program to gain an understanding of basic engineering operations leading to an NVQ Level 2, technical qualifications and various key/functional skills. Following this you will work within the Process Engineering team to gain an NVQ Level 4 in your specialist area
  • The training program is split between academic learning and on the job training. The academic part of the apprenticeship will be delivered by a local technical college and assessments will be conducted in conjunction with Siemens
  • On completion of the apprenticeship and subject to a good training record this could lead to a full-time position in a function that the business can support. This may include a maintenance technician, process engineering technician or manufacturing technician role
  • There is also the possibility of further education to support your future role such as sponsorship through university as part of a day release program for example
185

Business Process Engineering Specialist Resume Examples & Samples

  • Lead Continuous Improvement efforts in the Repair area
  • Develop/Update Value Stream Maps
  • Facilitate Continuous Improvement working sessions
  • Track project progress to milestone and completion targets
  • Work closely with the Repair manufacturing organization to implement improvement concepts
  • Teach Continuous Improvement tools and techniques
  • BS/BA in related discipline, or advanced degree, where required, or equivalent Required technical experience (including number of years)
  • Typically 3-5 years of successful experience in manufacturing
  • Less than 10% travel expected
  • Basic knowledge of Continuous Improvement tools including, but not limited to Value Stream Mapping, Kata, 5S, …
  • Lean Practitioner Training
  • Green Belt training
  • LI-SRH
186

Process Engineering Manager Resume Examples & Samples

  • Demonstrates competencies of directing others, staffing, planning and controlling the discipline portion of project work
  • Demonstrates effective interaction with other disciplines and personnel in business and project roles
  • Develops mass-and energy balances, P&ID's, process descriptions, process safety concepts
  • Performs process simulations and prepares equipment specifications
  • Applies Dow’s Global Project Methodology (GPM) and Dow’s Process Engineering Work Process Discipline
  • Ensures that the process design is safe, meets Dow’s Lost Prevention Principles and other Environmental, Health and Safety (EH&S) requirements
  • Provides input to project schedule and plans, than monitors progress against the plans
  • Ensure design deliverables for their discipline meet the needs of the project: functions as intended, on time and within budget
  • Identifies technical problems and appropriately engages the business partners to resolve
  • Master Degree in Engineering, typically in Chemical or Process Engineering
  • First Experience (minimum 3 years) in any related chemical or process engineering fields beneficial
  • Organization talent and ability to work simultaneously on several projects is required. This job requires excellent interpersonal & problem solving skills coupled with a strong technical background. Demonstrates ability to communicate and effectively sell ideas to all levels
  • Excellent communication skills, organizational and work coordination skills, and interpersonal skills are also critical to role success
  • Very good communication skills in German and English
  • Experience in several process technologies, operations and/or commissioning and start-up
187

MTS Etch Process Engineering Resume Examples & Samples

  • Working with integration and device teams to define technology specifications for etch to meet and optimize BEOL etch processes based on electrical feedback
  • Working with litho team and OPC team to do weak point check and provide solutions to improve weak points
  • Extensive development and manufacturing experience is requested
  • Planning and executing projects and implementing solutions on schedule
  • Engaging with tool suppliers to drive new etch technology in fab and tool and new material evaluation
  • Tool setup, qualification and tool matching; defining and maintaining BEOL etch process and equipment roadmaps
  • B.S. degree in Chemistry, Electrical Engineering, Materials Science, Solid State Physics or other relevant engineering physical science discipline is required. An M.S. degree or PhD is preferred
  • Minimum of 6 years of Semiconductor process engineering experience in the process area is desired; experience in advanced technology (28nm or below) is strongly preferred
  • Minimum of 3 years experience with design of experiment techniques and data analysis
  • Willing to relocate to Malta NY
188

Principal Process Engineering Resume Examples & Samples

  • 5 years of experience
  • Language Fluency: Fluent in English Language, written & verbal
  • Previous Engineer experience in semiconductor industry
189

Process Engineering Lead Resume Examples & Samples

  • Minimum 10 years of process engineering experience in Biologics, Pharmaceuticals and/or similar manufacturing industries
  • Experience in a GMP environment is preferred
  • Management experience of leading a multi-disciplinary team is an added advantage
190

Co-op, Process Engineering Resume Examples & Samples

  • Developing manufacturing processes and technologies and designing for manufacturability preferred Performs analyses to develop design specifications and performance requirements
  • Assist in providing technical information concerning manufacturing or processing techniques, materials, properties and process (advantages/limitations) engineering planning. Assist in selecting techniques to solve problems and make sound design recommendations
  • Assist in establishing processes based on product specifications
  • Evaluate process and design alternatives based on Design for Manufacturability principles
  • Understand IP issues relative to processes being developed
  • BS degree in Engineering; advanced degree preferred
  • Mechanical Engineer with CAD experience
  • Must have outstanding written and verbal communication skills
191

Manager, Process Engineering Resume Examples & Samples

  • Experience with clean room personnel, material flows, and aseptic processing regulatory requirements
  • Knowledge of cleanroom process flows and process design; I.E. biodisposable strategies, sterile filtration, mixing strategies, fluid transfer to and from various compounding vessels/biobags
  • Speciality knowledge of UF/DF, liposomal compounding/formulation strategies (ethanolic injection, extrusion), high shear mixing strategies, emulsions, suspensions, micronization techniques
  • Current in cGMPs and how to implement management systems that promote cGMP compliance
  • Computer literate with good working knowledge of spreadsheet software (Visio or equivalent drawing program a plus)
  • Ability to work with minimal supervision and interact well with clientele as well as interdepartmentally
192

Process Engineering Intern Resume Examples & Samples

  • Perform project support activities at direction of assigned supervisor(s)
  • Research and gather information from databases and from subject matter experts
  • Assist in cleaning, process and equipment validation and support documentation preparation
  • Input data into spreadsheets
  • Organize equipment and systems records, reports, and archive information
  • Organize and maintain project files
  • Review and verify data generated in laboratory notebooks and technical documents
  • Tabulate and perform statistical analysis of all study data
  • Maintain Technical services library including cataloging information, and controlling access to data
193

Process Engineering Manager Resume Examples & Samples

  • Broad general technical management role with direct responsibility for managing a team of 4-8 skilled Process Technologists
  • Lead and responsible for NPD, Transfer and Monosource projects for the site
  • To perform process technical development to achieve strategic imperatives and improve cost effectiveness
  • Understand current processes and capabilities to ensure robust manufacturing
  • Support in-sourcing projects from a technical perspective
  • Manage validation of new and existing processes and equipment
  • Support continuous improvement of processes across the site
  • Leads and is responsible for process validation activities across the site
  • Ad-hoc technical support for Operations, including NCR’s and support for Audits
  • Active member of site management team to ensure site KPI’s are met
  • Management of a team that delivers process technologies in the factory according to the Healthcare Technology Process
  • Work with cross functional teams for the successful launch of Whitespace projects from a technical perspective
  • Works across functions to identify and deliver improvements (Squeeze, PPV, X-Trim)
  • To manage a small team and ensure resources are allocated to meet key milestones and are aligned with business priorities
  • To lead and coordinate process validation across the site
  • To initiate and implement process development and improvement in the areas of cost, quality and customer service
  • To support the Global Healthcare Manufacturing facilities providing technical support as required, working with the Regional Supply Heads to support global manufacturing and engineering strategies
  • To continuously review manufacturing processes on the Salt Lake site and at contract manufacturers to determine the most cost effective supply strategy, and to improve process capability
  • Management of projects and budgets and deadlines to ensure implementation of supply echnical strategy
  • Degree in Science or Engineering
  • 8 years industry experience, Pharmaceuticals and FMCG business
  • Knowledge of UK, EU and FDA standards and legislation
  • Excellent interpersonal skills and ability to influence
194

Process Engineering Mgr Resume Examples & Samples

  • Demonstrated ability to lead and direct the activities and resources of assigned projects and support global growth for large scale complex projects
  • Apply complete knowledge of industrial engineering process improvement strategies and lean techniques (eg. Method analysis, work combination charts, ergonomics, visual controls, safety, kanban, poka yoke) to analyze and improve overall operations
  • Develop and lead the implementation of global standardization programs and processes to improve quality, productivity and cost performance of all product lines
  • Lead a team to develop process flows, control plans, CTQ’s and process documentation
  • Participate in PFMEA sessions for new product introductions to manufacturing
  • Integrate with suppliers to develop a working relationship with Amazon Robotics to design the new factory and implement new assembly lines and equipment to support the ramp
  • Provide guidance for identifying business requirements, specifications and design requirements for scaling the business to meet future demands
  • Bachelor’s degree Mechanical or Industrial Engineering preferred
  • Master’s degree a benefit but not required
  • 5-7 yrs experience leading a technical group in a fast growing environment
  • Factory layout, process optimization
  • Experience with automation, PLC programming, and motion control
  • Experience with mechanical design, FEA analysis, DFMA
  • Extensive knowledge of manufacturing and machining processes
  • Knowledge of casting, machining, plastic molds, metal forming
  • Demonstrated implementation of metrics, process capabilities, LEAN and IE techniques
  • Ability to manage multiple projects on tight schedules
  • CAD experience a plus (Solidworks, AutoCAD)
195

Director of Process Engineering Resume Examples & Samples

  • Provide day to day leadership, mentoring, and technical guidance to the Process Engineering team
  • Prioritize and assign process engineering and improvement projects to the team and manage for effectiveness of project planning, execution and completion
  • Lead our efforts to analyze and interpret process and manufacturing data to identify opportunities for brewery improvement projects, process changes, and new technologies that help achieve increased productivity, reduced product loses, enhanced manufacturing flexibility and capacity, improved product quality, safer operations, and improved environmental compliance
  • Support our efforts to actively seeks out best manufacturing practices through internal and external benchmarking
  • Provide expert technical engineering support and leadership to brewery personnel on brewing, packaging, material handling, cleaning, and processing operations – including troubleshooting equipment and process problems encountered during production
  • Lead the development and implementation of projects which drive continuous improvement across all aspects of the manufacturing process
  • Facilitate cross department collaboration with Maintenance, Engineering, Quality, Brewing, and Operations teams so that projects are identified and prioritized appropriately and executed successfully in a fun positive environment
  • 10 or more years of plant manufacturing and process engineering experience (production brewery experience highly preferred) with a Bachelor's degree in Engineering
  • Solid understating of the engineering principles and design considerations for various brewery equipment and processes including: tanks, pumps, valves, hydraulics, motors, VFDs, heat exchangers, refrigeration systems/chillers, boilers, high speed packaging equipment, instrumentation (temperature, pressure, flow, conductivity), waste treatment systems, filtration, and water purification systems
  • Must be highly motivated, proactive, and willing to take on new challenges
  • Ability to learn new processes quickly
  • Understanding of and experience with DMAIC and improvement methodologies
  • Experience in successfully leading and facilitating improvement projects and studies
  • Position is based in San Diego, CA and will require occasional travel to our Daleville, Virginia Brewery
196

Device As a Service Tools & Process Engineering Resume Examples & Samples

  • Bachelor’s degree in Business and Administration, Finance or related field, or equivalent experience
  • Service Industry experience, typically 10 years+ in several of the related disciplines of service delivery, or variety of Finance planning function, process engineering, project management
  • Understand, use ITIL - Fundamental Certification is a plus
  • PMP certification is a plus
  • Applies appropriate methodologies and SME knowledge to resolve complex business issues
197

Director of Process Engineering Resume Examples & Samples

  • Ability to execute business process analysis for the express purpose of identifying process improvements
  • Develop process documentation, including AS-IS and TO-BE process maps
  • Document detailed requirements for process improvements
  • Develop both Business and Functional Requirements documentation, review with business and technical partners, and obtain approvals
  • Coordinate between the business and IT to design technical solutions to meet process improvement requirements; includes generating detailed Design Documents and obtaining business approval for those
  • Create funding requests as required to support process improvement initiatives
  • Drive improvement projects through implementation, post-deployment support, and benefit tracking
198

MTS Process Engineering Resume Examples & Samples

  • 7 years of relevant experience is required (CVD process)
  • 5 years of Semiconductor process engineering experience in the process area is desired; experience in advanced technology (28nm or below) is strongly preferred
  • 5 years of experience with design of experiment techniques and data analysis
199

Process Engineering Manager Resume Examples & Samples

  • Strong knowledge in mechanical assembly, MSA, AMEF, PCA, SMT and wave solder processes
  • Advanced English level (90%)
  • Six sigma certification (yellow belt)
  • Experience in the footwear and/or automotive industry
200

Manager Process Engineering Resume Examples & Samples

  • Responsible for the validation and enhancement of production processes after a scaled-up formulation is approved and a manufacturing process is proposed. Development of production processes may include additional pilot plant tests and will most certainly involve scale-up to targeted production equipment in Mary Kay facilities. Additional accountabilities are to ensure that products can endure the normal variables of differing equipment, ranges of acceptable temperatures and humidity and minor operator errors. Direction of staff to identify potential failure modes and a design of experiments to dimension product failure points are also expectations of this position. Handover of documentation and training to appropriate site staff for each transfer of technology. Act as a liaison between Corporate Quality, Product Development, and R & D during new product launches. Act as a technical consultant to lead in bulk process problem solving. Lead the plant in the identification of bulk processing preventative actions. Lead in the analysis of bulk and finished product deviations. Coordinate and oversee process optimization projects, including the purchase of new equipment in the production operations. Manage first production sampling and approvals, manage the bulk product specifications change process and the control testing of bulk and finished goods for all first productions. Ensure accuracy and timeliness of all processing procedures and applicable FDA requirements. Lead a team of professional’s continually encouraging 100% employee engagement. 25%
  • Interfaces with Dallas and China Production Operations to integrate new technology, equipment and manufacturing procedures in the most cost-effective manner while maintaining project deadlines and mitigating potential customer service issues caused by new product introduction timing requirements. Participates in formula and process risk assessment in plant. Influences sound and technically robust solutions in formula process development with Pilot and Operations. 15%
  • Ensures that documentation exists to establish the validity of manufacturing processes on a global basis; oversees the control and maintenance of the Master Formula and Procedural System. All OTC validations and validation documentation is under the complete control and acceptance of this technical team. The documents are critical to FDA audits and GMP requirements. 15%
  • Advises process engineering staff in US to understand and implement new product technologies. Conducts bench and pilot batches for new and existing formulas to gain understanding of the bulk physical and chemical properties while trouble-shooting quality problems. Leads troubleshooting bulk related problems in both processing and packaging. Maintains all data, records and reports for FDA auditing. Maintains a safe, clean work environment and implement Mary Kay safety and environmental programs. Performs other duties as necessary or required. 15%
  • Manages and executes bulk processing and filling validations projects, including OTC processing and cleaning validations, back to back processing validations, new formulas, transfers of technology and processes. 10%
  • Interfaces with Operations, Engineering and R&D personnel to assess priorities, develop experimental strategies, coordinate project activities, and ensure client need satisfaction. Acts with the other functions as a team to own delivery of a reliable and repeatable production process for Operations 10%
  • Evaluates current processing techniques, systems, and equipment capabilities, and makes recommendations for enhancing processing capabilities and increasing cost effectiveness. 5%
  • Recruits, selects and develops staff members to competently fulfill assigned position responsibilities and meet continuously evolving global business needs. 5%
  • Project management skills should be at a level where solid experiments are designed and developed, projects prioritized, and personnel/equipment/facilities utilized in order to achieve agreed upon project timeline commitments. Interdepartmentally, project management skills should be at a level that is conducive to leading cross functional teams
  • A working knowledge of and experience in product development basics, scale up design and validation, technology transfer to Operations, equipment capabilities and translations, as well as experimental design and evaluation of data are required
  • Excellent oral and written communication skills are required in order to present project summaries/recommendations to all levels and to receive buy-in to move projects forward. Must appreciate widely varying cultural differences in communication styles between countries and adapt as appropriate
  • Occasional travel to the Mary Kay plant in China
201

Associate Director, Process Engineering Resume Examples & Samples

  • Builds and Directs Maintenance department in support of Manufacturing operations. Creates goals and tracks metrics against operational goals. Aligns priorities across functional subgroups. Develops, communicates, and implements tactical goals in support of Manufacturing operations and Facility utilization
  • Maintaining the process equipment and engineering systems in a safe and compliant state. Aligning procedures and best practices across sites. Presenting department programs to regulatory agencies. In absence of the Manufacturing Engineering (ME) Director or at the discretion of the ME Director, review and approve major deviations or other compliance documents requiring director level approval
  • Creates and maintains systems that promote safety and comply with all safety procedures and regulations. Ensures all safety incidents are properly investigated and corrective / preventive actions are implemented
  • LI-POT4
  • Min. of 5 years Management Experience, preferably Process Engineering
  • Min. of 10 years in a cGMP manufacturing environment
  • Excellent understanding of (bio) process engineering/ planning
  • Good technical knowledge of (bio) process systems, Upstream-, downstream and support systems
202

Senior Director, Global Process Engineering Resume Examples & Samples

  • Directs team members and individual contributors in support of Development, Tech Transfer, and Facility planning operations. Develops and maintains engineering systems, standards, and procedures to deliver concepts from R&D/TD into feasible manufacturing options. Creates and maintains facility and process modeling that identifies LRP capabilities and predicts facility investments. Develops, communicates, and implements strategic goals in support of Manufacturing operations and Facility utilization
  • Directs team members and individual contributors in support of process engineering activities for Capital Project conceptual and feasibility stages. Aligns facility, utility, and process designs to best practice standards across the internal and external manufacturing network. Supports Tech Transfer of new processes into production
  • Directs team members and individual contributors in support of internal and external Manufacturing operations. Provides indepth process engineering support for critical manufacturing operations in combination with site or CMO resources. Creates and maintains engineering design standards. Leads team of Process System Owners, responsible for execution of and adherence to engineering and operational design standards
  • Develops people and leaders within the organization. Creates succession plans and conducts talent reviews. Maintains/creates effective organization to provide continual learning environment that supports PO&T operations
  • LI-GA3
  • Critical Knowledge of Process Equipment, Distributed Control Systems, Equipment/System Validation, Facility Operations, Instrumentation, cGMP regulations, and Biotech and Pharma Manufacturing Unit Operations
  • Demonstrate ability to independently influence and/or manage multiple projects simultaneously
  • Demonstrate strong organizational skills and multiple project and time/resource management skills
  • Demonstrate strong leadership capability with excellent strategic vision and conceptual skills
  • Ability to serve as a consultant to all levels of management
  • Demonstrate excellent interpersonal skills including the ability to resolve problems with poise, tact and diplomacy
  • Ability to interact with people of a wide variety of backgrounds, levels of responsibility and education levels
  • Ability to maintain confidentiality
  • Ability to travel as needed (both domestically and internationally)
  • Ability to work in a typical office environment and use computer applications/systems
203

Manager, Process Engineering Resume Examples & Samples

  • A minimum of a Bachelor’s Degree in Chemistry, Engineering, Life Sciences or similar discipline is required
  • A minimum of 8 years of experience in the process development of cosmetic and OTC semi-solid formulation is required
  • Working knowledge of quality and operations activities at the plant level is required
  • Working knowledge of the product development processes from concept to large scale commercialization is required
  • Experience managing internal or external manufacturing sites is required
  • Ability to work in a fast-paced environment with multiple, concurrent priorities and many needing immediate resolution is required
  • Strong communication skills (verbal, written, and presentation) are required
  • Must have a proven track record of dependability and commitment
  • Must be able to work independently as well as collaboratively dependent on project’s scope
  • Knowledge of color cosmetics and/or unique product processes is a plus
  • Six Sigma Process Excellence and/or other improvement methodologies experience, training and/or certification are preferred
  • This position is based in Princeton, NJ and may require up to 30% travel within North America5823170324
204

R&D Manager of Process Engineering Resume Examples & Samples

  • 10 years or more experience in Process R&D / Process Engineering
  • Must have previous automotive experience
  • Must have previous manufacturing experience
205

Associate Director, Process Engineering Resume Examples & Samples

  • Practical Knowledge of GMP’s,Delta-V, PLCs, P&ID’s, SOP’s
  • Ability to manage technical staff
  • 10+ years total experience in the areas of GMP manufacturing, engineering or facilities in a pharmaceutical environment
  • Collaborative attitude with the willingness to work with global peers toward company and department goals. Focused dedication with the willingness to do what it takes to get the job done
  • Experience negotiating with and managing contractors, vendors, and/or outsourced services
  • Practical knowledge and application of GMPs, GLPs, and EMEA and ISO regulations
  • Experience dealing with FDA investigators, authoring responses to critical, major or minor observations and implementing corrective measures
  • Experience in coordinating / leading cross-site or cross-functional initiatives
206

Process Engineering Technician Resume Examples & Samples

  • Analyze and document best operation practices
  • Analyze process opportunity areas and implement corrective actions
  • Performs set up of processing equipment
  • Verify compliance of process by monitoring in a daily basis all critical process indicatos
  • Verify temperature profile of heat press machines is according to specification and best product results
207

Process Engineering Associate Resume Examples & Samples

  • Provide process engineering and technical support for ExxonMobil and Licensing manufacturing sites in the Downstream, as well as Chemical and Upstream for some process technologies
  • Provide process engineering and technical support for capital projects of varying sizes to meet business needs and ensure efficient use of capital
  • Lead or support troubleshooting or improvement opportunities
  • Work collaboratively with vendors and suppliers within established ExxonMobil requirements to ensure appropriate design, manufacture, testing and delivery of equipment
  • Support successful installation, commissioning, and operation of grassroots or revamped facilities
  • Support site turnarounds and startup/shutdowns, on planned or unplanned (short notice) basis
  • Interface with ExxonMobil R&D organization to identify opportunities for research, provide guidance on success factors of R&D efforts, and effectively deploy new technologies
  • BS degree in Chemical Engineering
  • A minimum of 8 years of oil and gas, petrochemical or refining industry experience
  • A minimum of 4 years specialization in either Distillation, Sulfur/Amine, Fluid or Delayed Coking, Hydroprocessing, or Fluid Catalytic Cracking
  • Technical refining experience, including monitoring, troubleshooting, asset support, projects and turnarounds
  • Excellent analytical and troubleshooting abilities
  • Demonstrated commitment to personnel and process safety leadership in all aspects of engineering work
  • Able to effectively communicate verbally and in written form to a variety of audiences
  • Process and Equipment design experience, including use of process simulation packages
  • Demonstrated ability to handle multiple priorities and stakeholders
  • Must be able to thrive in a goal-oriented, collaborative team environment
  • Demonstrated sound business judgment and ability to incorporate the "big picture" into strategy development
  • Ability to think strategically and develop creative fit for purpose solutions to resolve operational problems
  • Demonstrated ability to influence and promote change to achieve desired results with no direct authority
  • Experience as formal or informal leader and mentor
  • Willingness to travel domestically or internationally as needed
  • Strong facilitation skills for use in cross-functional efforts
  • Exposure to R&D and pilot plant facilities preferred
208

Senior Engineer Lithography Process Engineering Resume Examples & Samples

  • Support the efforts of the internal technology development team
  • Coordinate with Manufacturing Engineering to review daily goals/priorities, project statuses, and qualification timelines
  • Help establish and execute specific department plans and strategies to support the fab to achieve manufacturing KPIs. These include cycle time, line yield, OEE (overall equipment efficiency)
  • Participate in a "Continuous Improvement" program and follow "Lean Manufacturing" practices in the department to improve productivity and cost effectiveness
  • Support Fab8’s efforts in building a world class organization, achieving manufacturing excellence and establishing a team based collaborative culture
  • 3 years of Lithography Semiconductor Experience in a Process Engineer Role
209

MTS Process Engineering Resume Examples & Samples

  • Minimum of 6-7 years of Semiconductor process engineering experience in CMP related processes preferably in 300mm wafer Fab
  • Minimum of 6-7 years’ experience with design of experiment techniques (DOE), Statistical Process Control (SPC), Defect analysis and data analysis
  • M.S. in Chemical/Electrical/Electronics Engineering, Materials Science, Chemistry, Physics or other relevant engineering physical science discipline
  • Excellent technical problem solving skills
  • Excellent interpersonal skills, energetic and a self-starter
  • Individuals must be well versed in all Microsoft Applications (Excel, Word, PowerPoint)
210

Director of Process Engineering Resume Examples & Samples

  • Photolithography process experience
  • Thin Film Etch process(Dry and Wet)
  • Inorganic and organic material procurement and validation
  • Nano imprinting replication process
  • LCD & OLED Display backplane process experiences
211

Associate Director, Process Engineering Resume Examples & Samples

  • Responsible for development of project scope, front-end planning, evaluation of alternative solutions and preliminary designs for manufacturing facilities
  • Provides technical guidance during project implementation, assures viability of technology in proposed configuration, adherence to company standards and practices
  • Preliminary designs, including P&ID development and HAZOP facilitation
  • Leads or supports commissioning and qualification activities
  • Participate in the development and review of engineering guidelines, standards, safety/environmental policies, and change request
  • Education: Bachelor of Science degree (or higher) in Engineering or applicable Science
  • Minimum 7 years Pharmaceutical/Biotech industry in engineering and/or manufacturing in vaccines or biologics
  • Advanced understanding of hygienic, CIP, SIP design and unit operations specific to biologic manufacturing and/or aseptic processing
  • Creative, innovative, thinks outside of the box, self-motivated, applies problem-solving skills, and solid base in engineering fundamentals and equipment troubleshooting
  • Demonstrated leadership and teamwork skills. Ability to get results in a cross functional environment and has ability to effectively collaborate with and influence partners
  • Project/Time Management skills which deliver on time and quality work
212

Manager, Process Engineering Resume Examples & Samples

  • Manage and participate in the day-to-day operations of a team of process engineers
  • Manage all the operational aspects of the process engineering teams to ensure business and product objectives are met
  • Provide administrative, technical, and people leadership for a process engineering team
  • Provide feedback to the team and individuals on their performance
  • Coach and guide teams to enable successful outcomes
  • Lead initiatives that move us into repeatable, automated, and continuous integration and delivery processes
  • Innovate. Innovate
  • Ensure projects are completed on time and according to quality standards
  • Lead process architecture and design for one or more products and teams
  • Evaluate and measure progress and results of development efforts
  • Recruit, hire, and evaluate performance
  • Communicate across product management, engineering, operations, support, and leadership teams
  • Experience in automation
  • Bachelor’s degree in technical field or related experience
  • Knowledge of support organizations
  • Experience in managing team/s
  • Product Development Experience
  • At least 2 years of experience managing midsized to large enterprise systems
  • Exceptional management and people skills, ability to manage personnel activities of staff (e.g., hires, mentors, coach, trains, appraises, rewards, motivates, and disciplines, and recommends termination as necessary, 1-on-1's, Performance Reviews, etc. of his direct reports)
  • Passion for quality and continuous improvement of processes and customer service
  • Demonstrated experience leading a cross-functional team fostering innovation, creativity, and teamwork
  • Excel at cross-functional collaboration and leadership
  • Agile processes (Scrum, XP, Lean, etc.)
  • Partnerships with internal and external teams to deliver products, tools, and technology
  • Demonstrated ability in all aspects of hiring - creating staffing plans, writing job descriptions, attracting talent, and making great hires
  • Experience with product operations
  • Understanding of development operations initiatives
213

Process Engineering Manager Resume Examples & Samples

  • Solid experience in project transfer and exposure to automotive electronics product are preferred
  • Have a strong technical background, in-depth knowledge of electronic manufacturing process
  • Knowledge in lean manufacturing
  • Good command of English. Excellent communication and presentation skills
  • Good leadership and management skill
  • Set up the PE team job target and execute the job plan to realize it
  • PE team members daily job management
  • Set up the training plan; push the training activity to improve engineer's skill
  • Insure engineers can smoothly finish the project on schedule
  • Improve NPI technology capability and capacity
  • Hold PE team leader meeting and define each team's weekly job plan
  • As PE team contact window, correspond the cooperation relation with other teams
  • Review PE report before it is sent to customer
  • Assist team leaders to solve daily job difficulty
  • Training leaders how to arrange the job of his underlings
  • Coordinate for the sudden PE issue in project build run
214

Mgr-process Engineering CHN Resume Examples & Samples

  • Manage to optimize equipment utilization and cost of maintenance
  • Manage continuous improvement for process, quality, and productivity
  • Manage process development, qualifications and validation
  • Optimize existing manufacturing system
  • Manage and implement process controls strategies
  • Manage new product transfer, technology capability and manufacturability
  • Manage capacity plan
  • Coach and perform people development for engineering and technician
  • Solid knowledge on PCBA and high level assembly manufacturing process
  • Good knowledge of SMT equipment, process control and lean manufacturing
  • Good problem solving skills with tenacity and perseverance
  • Good communication with internal team, customers and suppliers
  • Good leadership to build team and motivate people to high level of commitment & excellence
  • Good written and spoken English
  • Bachelor degree, major in Mechanical, Electronics engineering or related
  • 6 - 8 years or above of working experience, 3 years of management experience in process engineering
215

Engineering, Process Engineering Internship Resume Examples & Samples

  • Lead a process improvement project
  • Install and qualify equipment
  • Support process improvement projects with experiments, data analysis and recommendations
  • Help troubleshoot OpenArray equipment and processes
  • General laboratory operation and maintenance tasks
  • Solid background in laboratory experimentation
  • Experience with computers and laboratory equipment
  • Independent contributor but able to collaborate with others
  • Basic surface chemistry understanding desirable
  • Completed at least two years of engineering course work
216

Process Engineering Manager Resume Examples & Samples

  • Bachelor’s Degree or equivalent preferred
  • 7+ years’ experience in a role as a Senior Process Analyst or in a process focused role, with a particular focus on product development and software development practices. This would include lean, agile and more conventional directive type processes and controls
  • Knowledge of Process Models (function process, entity relationship, etc.) and brainstorming tools (fish-bone diagrams, cause and effect, etc.) and their appropriate application
  • Knowledge of business consulting tools and methods including business process re-engineering
  • Basic understanding of IT strategy and Product Development components
  • Extensive experience with commercial SaaS based products and services
  • Strong understanding of lean, agile software SDLC, and product development practices
  • Strong analytical skills. Utilize root cause and impact analysis, interviews, focus groups, and other data gathering techniques proficiently
  • Demonstrate advanced skills with Microsoft Office Suite including, but not limited to: Word, PPT, Excel, and Project
  • Expert level proficiency with MS Visio
  • Employ Project Management techniques, tools and methods proficiently
  • Has an understanding of the Value Stream Mapping (VSM) process, and LEAN concepts
  • LEAN Six-Sigma Green/Black-Belt (desired)
217

MS&T Process Engineering Team Lead Resume Examples & Samples

  • Provide technical support and engineering expertise to support manufacturing operations and new product introductions
  • Provide leadership, support and technical oversight for the activities of the MS&T Engineering team as required. Promote the development of technical excellence within the MS&T Engineering group
  • Co-ordinate New Product tech transfer activities by working with team members to design how new manufacturing processes will be implemented in commercial manufacturing plants
  • Support team members during technical transfer of processes to other sites (within BMS or third party)
  • Support team members completion of product pipeline assessment activities e.g. plant fits, cost of good analyses for new processes
  • Ensure that the MS&T Engineers adhere to safe working practices, and promote safety in the department at all times
  • Participate in and support equipment and process HAZOP & risk assessment activities, ensuring appropriate safe guards are identified
  • Ensure team members provide effective training on new processes to Manufacturing personnel
  • Ensure the MS&T Engineering team play an integral role in the creation & review of batch documentation for new & existing products on site
  • Provide oversight for the MS&T Engineers in the implementation of equipment design & installation projects, including PAT installations
  • Develop & maintain expertise in on site control systems, process modelling and process robustness software and develop team member’s expertise in these areas
  • Maintain focus on industry and technology trends and opportunities. Maintain/develop links with external networks including Universities & Industry groups
  • A Degree in Chemical Engineering or equivalent
  • Minimum of 6 years experience in the Pharmaceutical/Chemical business
  • Demonstrated technical and team leadership including ability to provide technical coaching
  • Strong interpersonal and communicational skills, as well as excellent problem solving skills and commitment to Safety, Compliance and continuous improvement
  • Ability to work in a matrix environment and build strong relationships by being transparent, reliable and delivering on commitments
218

Manager, Process Engineering Resume Examples & Samples

  • Builds & maintains an understanding of the process technology needs & capabilities across the company, especially in their target platform. Partners internally and externally (Universities, suppliers, competitive scouting) to identify technologies that can be adapted for our needs
  • Coaches and leads a team of 3-5 direct reports. Shows a passion for developing talent, maximizing performance, and career growth for the group as a whole
  • Acts as “the face” of the process engineering team to stakeholders & team members across their target platform. Is able to effectively manage stakeholders across the organization. Drives discussion on effective resource allocation to the right projects
  • Additionally, this position will be responsible for redefining and developing the strategy & capabilities of our internal & external pilot plant/scale-up network
  • BS in Chemical, Food, Biochemical, or Mechanical Engineering required. Advanced degree preferred
  • Minimum of 7 years of experience with proven leadership in food process technology or related areas of work
  • Passion for individual engineer and total group career development
  • Background in frozen food or extended shelf life dairy & refrigerated foods and related processing desired
  • Creative and result oriented personality
  • Self-starter, but also a team player with proven problem solving skills
  • Ability to travel up to 25% of the time. Must be able to travel independently and as a responsible company representative
219

MTB Test Process Engineering Manager Resume Examples & Samples

  • Identify, manage and monitor key performance indicators (KPIs) for the department
  • Drive for continuous improvement in department key objectives. Eg. Cost, Quality, Cycle Time, productivity
  • Manage and monitor costs/headcount within your department according to business plans
  • Recruit effectively both internally and externally
  • Lead and manage effectiveness and efficiency of all Test processes under the QMS framework
  • Implement Quality Control Plan / tool
  • Provide the necessary production support
  • Support Customer/ISO/TS audit activities
  • Ensure qualification of Post Elect equipment and recipe management
  • Implement inline process controls and improve process capability through SPC (Statistical Process Control)
  • Provide timely and accurate disposition to deviated material while minimizing false triggers
  • Manage execution of engineering and/or cross-functional projects to ensure operational objectives are met
  • Develop short and long term plans to effectively to meet departmental goals
  • Maintain a matrix on process capabilities and constraints
  • Manage new product startup
  • Develop a strategy to develop new capabilities or to overcome the identified process constraints
  • Work with Central Team / equipment suppliers to develop new capabilities
  • Develop strategy to drive Operational Error reduction
  • Leadership position
  • Semiconductor Manufacturing
  • Thinking skills
  • Management Execution
  • Coaching and Development of the reports
220

Process Engineering Intern Resume Examples & Samples

  • Must be enrolled in BS degree program preferrably Business or Engineering major
  • Experience with pivot tables
  • Intermediate Excel skills, basic data analysis skills
221

Manager Process Engineering Resume Examples & Samples

  • Minimum + 8 years’ experience in the Chemical/Pharmaceutical industry with minimum of 2 years previous people leadership. Experience in process design, operations/engineering role, technical transfer activities
  • BS degree or higher in Chemistry, Chemical Engineering, Process Engineering or related field. Previous manufacturing, engineering, product development experience in regulated industry highly desirable
  • Six Sigma Black Belt or demonstrated experience using Six Sigma methodology to improve quality and product performance (experience leading design of experiments, statistical analysis, gauge R&R studies, process capability analysis, etc…)
  • Possess a continuous process improvement mindset with the ability to effectively lead and manage change. Demonstrated “can-do” approach and dedication to solve equipment and process issues to keep the machines and production lines in full service
  • Strong project management / program leadership skills with strong verbal and written communication skills
  • Experience in production of solvents or handling of flammable chemicals a plus
  • Expert knowledge of cGXP requirements
  • Quality focused on voice of the customer
  • Strong computer knowledge including Microsoft Office products
222

Manager Process Engineering Resume Examples & Samples

  • Lead a group or engineering and development employees to improve operational production process controls. Ensure manufacturing reliability and quality for existing chemical processing portfolio and assets
  • Develop a fundamental understanding of how the process elements affect product performance. Perform process characterization work, identify critical quality attributes (CQA) and associated critical process parameters (CPP). Implement solutions to better control process performance to ensure robust, reproducible and efficient manufacturing processes
  • Ensure appropriate production equipment is utilized during manufacturing to yield the most consistent high performing product with improved manufacturing right first time performance
  • Revise/create associated production documentation to improve consistency in execution and GDP (manufacturing and packaging batch records, SOPs, QC specifications, etc…). Assist in training production staff on updates processes, techniques and documents
  • Liaise with Manufacturing, Engineering, Quality and Product Development as technical link to drive process improvements
  • Lead quality investigations, as assigned, from customer complaints or defects
  • Performs all job duties in a safe manner and obeys all safety policies and procedures
  • Performs all job duties consistent with the Code of Ethics and the ThermoFisher 4-I Values (Integrity, Intensity, Innovation and Involvement)
  • Reports to the site head of operations as a strategic position aimed at securing the future of existing core chemical processing business portfolio
223

Mgr Matl Process Engineering Resume Examples & Samples

  • Serve as supervisor of assigned staff with responsibilities to include hiring of employees, monitoring performance, administering disciplinary action, separation of employment, and resolution of employee related issues regarding assigned staff
  • Provide direct interface with Northrop Grumman’s managers, directors and vice presidents.Coordinate the group’s activity by providing technical support, supervision and guidance primarily supporting aircraft manufacturing personnel by development of repair concepts to address defects exceeding existing published Original Equipment Manufacturing (OEM) repair data
  • Develop well defined Northrop Grumman statements of work from limited customer-provided data and aircraft specifications.Responsible for the engineering data (drawings, reports, manuals, etc.) to substantiate engineering developed repairs
  • Provide proper distribution of tasks and labor to ensure that schedule and budgets are met
  • Interface with other Northrop Grumman departments to ensure internal and external customer requirements are met
  • Set department objectives, assign projects and evaluate group(s) work for content and conformity with customer and Northrop Grumman requirements
  • Maintain involvement in day to day Northrop Grumman operations to ensure that the highest level of engineering support is maintained at all times.Coordinate in a professional manner, with customers, major manufacturers, vendors, or other outside agencies to promote and support Northrop Grumman’s technical & commercial interests
  • Prepare and implement department operating and capital budget
  • Bachelor’s degree in Engineering or related scientific field and ten (10) years’ experience in aircraft/aerospace engineering MRO repairs, commercial or military
  • Ability to obtain a secret US government clearance
  • Must possess comprehensive knowledge of standard aircraft components, materials, fabrication practices, aviation hardware, and proper applications in design
  • Must also possess knowledge of engineering principles used in stress analysis, finite element modeling (FEM), 3D computer modeling, or other analytical substantiation techniques
  • Must possess extensive knowledge of personal computer systems with Microsoft Office, including Microsoft Project
  • Must be able to travel both domestically and internationally
  • Must have extensive knowledge of the use and application of aircraft technical data such as engineering drawings, service bulletins, etc
  • Must have the ability to manage, organize, and motivate people in technical positions
  • Must have superior oral, written and organizational skills that are easily applied to administration and management
  • Must and be able to read, write, speak and understand the English language
  • Must be a highly motivated self-starter, able to work under pressure with a minimum level of supervision
  • Must be able to sit and work effectively in a standard office environment for extended periods of time
  • Master’s degree in Engineering, Engineering Management, or Business Administration
224

Director Process Engineering Resume Examples & Samples

  • Leads process diagnostics to identify impactful opportunities for operational improvements across end to end value streams
  • Supports change leaders through each phase of deployment, including the development of a process-specific plan for design, pilot, and sustain phases
  • Coaches process teams and change leaders on the standard lean systems, tools, techniques, mindsets and behaviors
  • Delivers lean system training and leadership coaching to process teams and change leaders
  • Enables implementation at scale
  • Develops impact objectives and progress tracking mechanism against objectives
  • Utilizes problem solving efforts on key projects to improve quality, reduce cost and eliminate waste
  • Provides leaders with project status updates, feedback, and appropriate reporting on key process focused objectives
  • Master Black Belt/Green Belt Certified or demonstrated knowledge of Lean or Six Sigma
225

Process Engineering Technician Resume Examples & Samples

  • Manufacturing protocol support in a highly regulated medical device manufacturing environment
  • Must have flexibility for working selected night shifts
  • Ensure progress of protocols, document adverse events; obtain information for engineers on protocol associated requests
  • Must have good organizational skills, for keeping orderly track of protocol sample lots and special requests for samples
  • Deliver protocol samples when instructed to various individuals or department. 40% (flex or night shifts)
  • Work in Quality Engineering lab for specific product packaging microscope measurements
  • Run a peel force tester, for data collection
  • Follow lab work instructions and have organizational skills to properly enter and manage data. 30% (day shift)
  • Various experimental tasks in the Quality Engineering lab to support testing initiatives from supervisor
  • Execution of new experimental test methods for feasibility studies, data collection and analysis, and follow instructions for documentation requested. 20% (day shift)
  • Basic working knowledge of Microsoft outlook, word, and excel
  • Protocol documentation support as needed, following direction of process engineering lead. 10% (day shift)
  • Associates Degree in technical or analytical or sciences field
  • 3+ years experienced required in technical related field
  • At least two years' experience in a manufacturing, assembly, or lab environment
  • At least 1 year experience following technical job task descriptions in manufacturing, assembly, or lab environment
  • Measurements of approximately 150 packages per work day for seal width or 150 packages for peel force or combination
  • Previous use of optical microscope is a plus
  • Basic lab skills are a plus
  • Basic mechanical skills are a plus
226

Engineer CVD Process Engineering Resume Examples & Samples

  • B.Sc. degree in any of the following engineering degrees: Physics, Chemistry or Electronics
  • Minimum of 2 years working experience in semiconductor industry or semiconductor research
  • Knowledge of statistical methods in process development and optimization (i.e. design of experiments, DOE)
  • Knowledge of methods in statistical process control (SPC)
  • Excellent team player
  • High Integrity
227

Process Engineering Manager Resume Examples & Samples

  • Department lead for a team of Process design engineers and technicians in a new product development environment
  • Provides technical direction for the team and establishes clear goals, strategies, and initiatives to drive new product platform development and ensure achievement of technical, production and financial metrics
  • People Management and Talent development of team members i.e. recruitment, performance reviews, compensation recommendations, succession planning, performance improvement and employee relations
  • Assist in developing Mfg. process technology roadmaps and high volume manufacturing strategies
  • Influencing product/process designs during new product development phase to insure economical and defect free manufacture
  • Gain cooperation of others, conduct presentations of technical information with specifics on projects/schedules and timelines. Responsibilities include understanding customer requirements and expectations, and developing/driving actions and schedules needed to support those program expectations
  • Detailed understanding of market and implications for business when providing capital and labor cost estimates
  • Interface with suppliers and contract manufacturers to insure processes are capable, have sufficient controls in place, can meet our delivery requirements, and meet our cost targets
  • Maintain product documentation (drawings and specifications) and lessons learned
  • Minimum BS degree in engineering (Mechanical, Electrical or Materials), Master’s desired
  • 6 years min experience, 2 of which in a leadership role developing new products from concept to high volume manufacturing. Experience in electromechanical or electronics industry desired
  • Experience in developing advanced Mfg. processes like wirebonding, LASER/resistance welding, injection molding, dispensing, thick film printing, SMT etc
  • Knowledge of basic electrical circuits, microelectronic assembly, statistical methods, process control fundamental, electrical function testing and electromechanical device calibration is desired but not mandatory
  • Strong planning and organization skills
  • Ability to positively influence and build relationships with global team members
  • Engineering aptitude to participate in design/Process reviews
  • Awareness of Design To Cost and Design for Manufacturability
  • Advanced Skills in Microsoft Excel, Project, PowerPoint and Word
  • Functional understanding of advanced quality planning tools including FMEA, Control plans, to meet TS16949 requirements
  • Experience with automotive OEM’s and/or Tier 1 suppliers is also a plus
  • Willingness to travel internationally to our business centers and manufacturing sites as needed is a must
  • Ability to offer innovative solutions – adapting to change, leading the change process
228

Process Engineering Manager Resume Examples & Samples

  • Process Engineering Manager will be accountable for all aspects of client development and project execution including: technical accuracy and quality of the work product, performance of team members, professional development, horizon planning, efficient use of standards and best practices, utilization, and coordination with other disciplines
  • The Manager will be intimately involved in proposal development and presentations, project team leadership, project budgets and forecasting, vendor/contractor management, equipment procurement, schedule management, project engineering, and site management/installation support
  • This position will be responsible for process mechanical design, process equipment, vendor and contractor management, as well as installation and start-up support
  • This position requires a working knowledge of process flow diagrams, piping & instrument diagrams, mass & heat balances, basic piping system design, pump sizing, material handling methods, equipment, functional & installation specifications, as well as process instrumentation & control principles
  • This position requires strong analytical skills, basic understanding of project management fundamentals as well as strong computer skills (Microsoft Office, Microsoft Project, & AutoCAD)
  • A practical understanding of sanitary design and construction methods and knowledge of process electrical / control and instrumentation design integration is preferred
  • Candidates must possess effective organizational, communication and interpersonal skills
  • This position requires an individual who is a self-starter and can work with minimal supervision
  • Maintaining and growing solid client relationships is a key responsibility of this role
  • Successful Design Group Managers have leadership skills and experience with a drive to grow and expand local and regional client relationships
  • Minimum 10-15 years of industrial project engineering experience involving process and related automation applications
  • Experience in the food, dairy, beverage/brewery, or personal care industries is highly preferred
229

Process Engineering Department Manager Resume Examples & Samples

  • Provide Technical Leadership
  • Participate in the Process National Practice that forms the framework for the practice
  • Work with Project Managers to develop budgets and ensure projects are executed on time and within budget
  • Create and oversee the development of design documents such as P&ID’s, Process Flow Diagrams, Mass & Energy Balances and Equipment Lists
  • Lead and develop the implementation of process specifications and standards
  • Actively review work for accuracy and completeness
  • Ensure work is being executed efficiency
  • Oversee the work of the department and ensure the work is being executed to the expectations of the client and Project Manager
  • Responsible for coordination with other departments
  • Professional Development of Team Members
  • Manage direct reports including performance, career and development plans
  • Expand technical competency of team members
  • Advance the Design Group Rules of the Culture and Guiding Principles of Leadership
  • Role and Responsibility to the Organization/Business
  • Manage and assign project responsibilities within the Department
  • Respond to client needs to support projects
  • Execute company administrative requirements
  • Support marketing, proposal and Client development activities
  • Be actively engaged in the recruitment process
  • Minimum 10 – 15 years of industrial process engineering and project management experience involving automated processing systems and management of integration and installation of major process lines, preferably in the food or beverage industry
230

Process Engineering Co-op Resume Examples & Samples

  • Candidate to show, by experience or otherwise, an entrepreneurial background
  • Must have completed at least 3 years of college in accredited chemical, mechanical, or bio-engineering program
  • Graduate students welcome
231

Process Engineering Resume Examples & Samples

  • BS/BA in engineering, preferably mechanical or chemical
  • Ten years of experience in the pharmaceutical or biotechnology industry
  • Two years of experience managing a technical staff
  • Prior project experience in the design, construction, and startup of commercial pharmaceutical facilities preferably including biopharmaceuticals or vaccines
  • MS in Engineering, MBA, Professional Engineer Certification
  • Lead a team of engineers who are experts in bioprocess equipment and facility design / operation including cell culture, fermentation, centrifugation, chromatography, and filtration
  • Support the 24/7 manufacture of medicines critical to patient quality of life and support critical revenues for the company. On-call support for manufacturing troubleshooting, as-needed maintenance, and planned upgrades is a team necessity
  • Fluent in biopharm industry standards for equipment and facility design for cleanability and bioburden control. Expert in CIP/SIP design and operational principles. Familiar with statutory guidance for above (ASME BPE, ISPE)
  • Manage efforts and resources required by project teams to meet technical, budget, and schedule goals. Expert in multi-tasking, scheduling, budgeting, and project management. Familiarity with equipment supplier, preferred subcontractor, and consultant engineering markets to support site projects as needed with competitive cost and service
  • Interface with Environmental, Health & Safety, Technical, Production, Quality, and Corporate Engineering groups to assure that each project conforms to approved user requirements
  • Guide / mentor / coach staff as they gather data on operational problems, support their generation of possible solutions, and the selection and buy-in of the final solution. Follow-up to ensure the solution is implemented appropriately and satisfies the customer’s requirements
  • Develop high-performing engineers into experienced leaders and experts in manufacturing capable of leading the business outside engineering
  • Manage the technical support for the facility preventative maintenance program (process)
  • Manage the technical support for process related equipment procedure development, and required staff operation and maintenance training
  • Manage the evaluation and selection of new equipment or modifications to existing systems to consider new processing technologies or strategies. This may include an economic, environmental, quality, or productivity analysis
  • Support validation staff in the development of validation strategies and testing plans
  • Manage resources to complete assigned validation protocols on time
  • Manage the engineering records system to maintain current documentation
  • Knowledgeable in cGMP’s and aforementioned guidelines for bioprocessing
  • Strong technical understanding of the pharmaceutical industry and engineering practices
  • Demonstrated ability to generate options to resolve problems, prioritize solutions, determine appropriate course of action, gain consensus on that recommendation, and implement the decision
  • Demonstrated ability to enhance team building, and to participate as a leader or member on a cross-functional and self-directed work team
  • Knowledge of basic Project Management and presentations tools (e.g., Microsoft Project, Visio, PowerPoint)
232

Powertrain Production Process Engineering Resume Examples & Samples

  • Develop an expertise of manufacturing processes. Understand process capabilities through critical data analysis and in depth understanding of the product
  • Responsible for diagnosing issues found during the Powertrain manufacturing process and drive corrective action back to source
  • Analyze data from various sources to identify trends in build quality and efficiency. Develop robust and clear data collection, visualization, and analysis tools
  • Collaborate with cross functional teams (including production, design, manufacturing engineering, quality, supplier engineering, production control, and others) to optimize production processes and testing
  • Manage activities for process technicians to support day to day coverage of production line
  • BS degree in engineering, mathematics, or physical science (advanced degree a plus)
233

Senior Engineer PVD Process Engineering Resume Examples & Samples

  • Continue to improve process robustness for high volume manufacturing using statistical tools, DOE techniques, data driven decision making and systematic problem solving skills. Use lean manufacturing and six sigma processes
  • Participate in the evaluation of toolsets, and defining best tools for Fab 8 ramp-up
  • 3 years of relevant experience is required
  • An MS technical degree with 1-2 years of experience or PhD degree in Chemistry, Electrical Engineering, Materials Science, Solid State Physics or other relevant engineering physical science discipline with 0-1 years of experience preferred
234

Process Engineering Tech Resume Examples & Samples

  • Gathers data, performs statistical analyses, and issues targets and dispositions nonconforming materials
  • Prepare various production and technical documents
  • Support new product launches
  • Assists process engineers in developing, improving, testing and troubleshooting manufacturing processes and equipment
  • Provides technical support to manufacturing operators
  • Collects and records data to support process metrics, comply with customer requirements, support engineering projects, etc
  • Prepares, compiles, and records process engineering data
  • Observes manufacturing processes and recommends modification or change
  • Trains, observes and confers with equipment operators to ensure specified techniques are used, to troubleshoot the process and to assist operators in achieving optimum equipment operation
  • Leads and participates in internal audits and process reviews
  • Prepares, updates, and maintains process documentation, and internal database
  • Prepare presentation based on process data, and communicate to the group as needed
  • High School Diploma/GED and Specialized Training and/or Certification with 5-7 years related experience
  • Must possess specialized trade or skill
  • Must be self-directed and operate independently
  • Demonstrates the ability to identify and initiate work projects and/or working on multiple tasks
  • Ability to operate or maintain complex equipment
  • Demonstrates the ability to influence others
235

R&D Process Engineering Co-op Resume Examples & Samples

  • Works with Maintenance, Production, Safety, Corporate Engineering, and R&D to identify and implement major cost savings projects involving new processes, new technology, and/or new ingredient
  • Assists with development of machinery and systems specifications and provides ongoing support for revisions and updates
  • Assists with development, documentation, and presentation of conceptual layouts, feasibility studies, budgetary estimates, etc
  • Conducts studies of processes on existing lines: make recommendations based upon opportunities to increase productivity, reduce cost, and improve quality
  • Identifies basic process improvement and cost reduction projects by providing facility audits and analysis of existing production lines and processes
  • Assists with capital projects within established schedules and budgets; including equipment selection, line layout engineering, integration and controls, project scope and documentation, purchase order origination, invoice tracking, startup support, ergonomic designs, etc
  • Develops, estimates and presents preliminary capital proposals including return on investment, benefits and alternatives
  • Highly motivated self-starter whodisplays initiative and takes ownership of work
  • Ability to effectively manage multiple projects and assignments
  • General understanding of industrial process and control systems
  • Ability to navigate through ambiguity & overcome obstacles
236

Business Process Engineering Analyst Resume Examples & Samples

  • Provides analysis of data and reviews business processes to maximize workflow efficiencies
  • Maintains inventory of business processes and any associated changes, updates, or additions of skills along with the associated impact
  • Analyzes business processes and utilizes metrics to support proper management of skills
  • Recommends changes to systems, processes or procedures to maximize the amount of work handled via automation
  • Analyzes staff resources to maintain Jackson service level agreements (SLAs), including staffing for Operations support
  • Collaborates with the Manager, Business Process Engineering, Operations leadership, and IT regarding process design, business rules, and resource allocation to maximize efficiency
  • Identifies and assists in establishing work prioritization,
  • Develops contingency plans to utilize if service levels are not being met
  • Creates, maintains and enhances business rules
  • Develops and collaborates to maintain proper documentation of business processes and rules for standard operating procedures and related documentation including computer based training needs
  • Utilizes industry modeling standards to model business processes and decisions
  • Generates and presents technical reports, charts, and summaries to management, including Operations department heads
  • Resolves issues and provides excellent customer service support
  • Consults with Operations and Quality Assurance on test scenarios and results for business process changes made by IT
  • Excellent quantitative, analytical, and problem solving skills with the ability to think creatively and apply solutions in a fast-paced environment
  • Strong organizational skills; ability to prioritize tasks and projects to meet deadlines
  • Ability to learn and become proficient in all job-related software applications (SAS, Microsoft Excel, Signavio, Microsoft Access, Jackson specific applications)
  • Solid written, verbal and presentation skills with the ability to concisely summarize data into reports and summaries
  • Ability to communicate complex and technical concepts to audiences of varying levels of technical knowledge
  • Strong attention to detail with a high-level of accuracy
  • Strong customer orientation with the ability to manage and exceed customer expectations
  • Ability to effectively accept change in a positive manner
  • Ability to work with individuals across multiple teams to accomplish objectives
  • Ability to understand complex business processes and situations
  • Strong statistical and mathematical skills
  • Ability to promote and implement change while securing buy-in among stakeholders
  • Ability to acquire knowledge of skills and business rules, which may include proficiency with
  • Bachelor’s degree or equivalent experience required. Major in Engineering, Applied Mathematics, or Statistics preferred
  • 1-2 years of analyst experience in a complex business environment preferred
  • Experience using SAS/SAS Enterprise preferred
237

Co-op / Process Engineering Resume Examples & Samples

  • May use computer-assisted engineering software and equipment to perform engineering tasks
  • Currently enrolled in Chemical Engineering curriculum is required
  • Experience with MS Word, MS Excel, and MS PowerPoint is required
  • Attention to detail and the ability to exercise good professional judgment is required
238

Process Engineering Technician Resume Examples & Samples

  • Work as a Process or Quality Engineering team member with Line Maintenance and Manufacturing on investigating, collecting data and assisting in resolving production and E-test issues. This includes providing production support with disposition of lots, assisting in resolving tool issues, and assisting in qualifying tools to keep cycle time at a minimum. In so doing, the technician shall determine and document appropriate actions taken
  • Provide hands-on in the fab support to the Process or Quality Engineering staff, performing tasks related to continuous process improvement, new process development, new equipment evaluations, experimentation and characterization of processes
  • Work as an individual (or as team member with Process or Quality Engineering, Line Maintenance and/or Manufacturing) on projects or tasks related to improvement of
  • Process, E-test or Sort Yields
  • Equipment or Process Cycle-time and through-put
  • Production Operator training
  • Quality controls/systems (CAB, MRB, PFMEA, etc.)
  • As directed, create new and/or update existing group specifications with new or updated tasks and procedures
  • Perform training and/or certify Operators to area specifications
  • Provide a daily written communication pass-down of your activities and related progress on assigned tasks
  • Ability to identify the various process levels through microscopic and SEM cross-sectional observations
  • Demonstrate skills and experience with using the PROMIS system for Lot tracking, tool SPC, etc
  • Working toward a 4 year technical degree
239

Process Engineering Manager Production Control Resume Examples & Samples

  • Drive and maintain the plan for every part data centrally with input from other facets of the organization
  • Manage material flow analysis with a focus on reduction of waste - Analysis includes dock, storage and manpower. Drive team to perform time studies and use standard data for manpower computations
  • Work with internal simulation teams to develop a dynamic simulation model to simulate material flow and drive efficiencies with reduction of stock outs
  • Work with Packaging and supply chain to drive standard packaging and density for all parts coming into the plant
  • Support warehouse and process adjustments for improvement and space availability changes. Analysis includes warehouse densification projects due to volume changes by car segment
  • Develop layouts for warehouse and material display in stations and assist 3PL Warehouses to optimize space and manpower
  • Develop business cases for improvement projects such as external warehousing, variant reduction, sequencing and kitting and automation
  • Drive ergonomics for all handling processes within production control and provide criteria to equipment group to provide effective line display and powered industrial equipment
  • Drive teams to execute efficient value streams with focus on benefit/costs
  • Create documentation for training materials such as job cards, standard work, and standard operating procedures for Production control personnel
240

Process Engineering Technical Manager Resume Examples & Samples

  • Lead a team of Assembly/Process Engineers to execute program requirements in the Product Delivery Centers (Multiple Assembly Sites)
  • A passion for and detailed knowledge of configuration management for hardware
  • Align Assembly Engineering resources with projects that support key business initiatives: Work Instruction Legacy transition to Solumina A&T, Lean transformation, etc
  • Promote the use of data driven root cause and corrective action tool usage to support On-Time production, CAR (Corrective Action Request) closure and the Engine Centers journey towards ACE Gold status
  • Continue to ensure production readiness for multiple engine product lines as they move into high production ramp-up across all production assembly sites
241

Senior Engineer CMP Process Engineering Resume Examples & Samples

  • BS Degree in Chemical Engineering, Materials Science, Chemistry, Solid State Physics or other relevant engineering physical science discipline is required
  • Knowledge of semiconductors and CMP processes
  • Minimum of 2-4 years of experience with design of experiment techniques (DOE), Statistical Process Control (SPC), Defect analysis and data analysis
  • MS in Chemical/Electrical/Electronics Engineering, Materials Science, Chemistry, Physics or other relevant engineering physical science discipline
242

Materials & Process Engineering Principal Engineers Resume Examples & Samples

  • A minimum of 10 years of relevant work experience in the aerospace industry is required
  • Specific experience with state-of-the-art composite and plastic materials and processing technologies
  • Ability to comprehend and resolve complex technical issues within scope of responsibility
  • Demonstrated ability to work effectively in multi-disciplinary teams
  • U.S. Citizenship or Permanent Residency
243

Process Engineering Intern Resume Examples & Samples

  • Work in partnership with the plant operations team to improve manufacturing efficiencies through the application of Operational Excellence methodologies and toolsets
  • Support Operations teams on a daily basis to analyze performance and drive improvement in the manufacturing areas
  • Lead continuous improvement initiatives on critical processes to remove waste and improve productivity
  • Own Industrial Engineering tool use and supports local operations staff in the use of the following tools
  • Junior or Senior BS candidate in Industrial or Manufacturing Engineering
  • Manufacturing and/or supply chain engineering experience
  • Ability to multitask, prioritize, and meet deadlines in a timely manner
  • Regulated industry experience preferred
244

Process Engineering Intern Resume Examples & Samples

  • Work with stakeholder to identify desirable outcomes
  • Compile info from various resources
  • Perform analysis using Excel
  • Identify issues and opportunities for improvement
  • Attend and participate in regularly scheduled meetings,
  • Providing verbal and written status updates on assigned tasks
  • Other day-to-day activities as identified
  • Currently enrolled in a 4 year bachelor undergraduate program as a full-time student majoring Chemical Engineering
  • Ability to follow written and/or verbal instructions
  • Basic problem solving and project management abilities together with a professional image
  • Ability to learn quickly, pay attention to detail, prioritize assigned tasks and effectively manage time to meet deadlines
  • Strong computer skills with Microsoft Office and proficiency with Excel
  • Currently enrolled in a 4 year bachelor undergraduate program as a full-time student
245

Process Engineering Intern Resume Examples & Samples

  • Performs routine aspects of engineering requiring knowledge and application of basic engineering principles under close supervision
  • May assist in the coordination of projects from conception (feasibility) through final plan preparations
  • Handles various administrative duties
  • Provides support to staff members as needed
  • No previous experience required
  • Attending college and working on an associates or bachelor's degree in a major related to one of the company's lines of engineering/business required
  • Candidates must have unrestricted rights to work in the U.S required
  • Must be able to pass background required
246

Process Engineering Professionals Resume Examples & Samples

  • Coal Handling & Process Plant Production & Maintenance Superintendents/ Supervisors
  • Process Engineering Professionals
  • Geotechnical Engineering Professionals
  • Mining Engineering Professionals
  • Geology Professionals
247

Business Process Engineering Specialist Resume Examples & Samples

  • Lead Continuous Improvement efforts in the Gas Turbine Repair area
  • Work closely with the Gas Turbine Repair manufacturing organization to implement improvement concepts
  • Extensive knowledge of Continuous Improvement tools including, but not limited to Value Stream Mapping, Kata, 5S, Setup Reduction, 3P, …
248

Process Engineering Resume Examples & Samples

  • Bachelor’s degree or higher in a science or engineering discipline from an accredited university
  • Degree in Mechanical, Chemical or Electrical Engineering
  • Three (3) years of Manufacturing experience with high speed automated slitters & packaging equipment
  • Lean Six Sigma expertise including statistical tool analysis
  • Demonstrated experience to analyze problems, diagnose root cause, and apply corrective actions
  • Demonstrated organization and communication skills, written and oral
  • Results oriented with strong process and execution skills
249

Process Engineering Technician Resume Examples & Samples

  • Sustain the areas of diffusion, thin films deposition, and ion implantation to meet production goals and maintain quality by reviewing and dispositioning aberrant lots, addressing equipment issues, and providing manufacturing support in a semiconductor cleanroom
  • Monitor the health of the production line by reviewing and responding to process trends using SPC
  • Improve yield and quality of the product by running experiments and analyzing data
  • Identify opportunities and improve efficiencies to reduce energy and material usage, reduce utility consumption and waste, and reduce manufacturing cost
  • Write and edit specifications/ procedures and train peers
  • Bachelors Degree in Science or Engineering is preferred
  • Strong work ethic and ability to work independently with excellent attention to detail
  • Excellent time management skills and ability to handle multiple priorities in a fast paced environment
  • Effective verbal and written communication
  • Basic understanding of semiconductor device physics and materials
  • Wafer fab experience or knowledge of semiconductor processing in diffusion, thin films, or implant
  • Problem solving in a high volume production facility
  • Ability to rapidly learn new skills and easily adapt to change
  • Familiarity with SPC and statistical data analysis of DOEs using Excel or Jump is preferred
  • Be able to work the swing shift (3:30pm – 12:00am Monday through Friday)
250

Welding Process Engineering Resume Examples & Samples

  • Support and promote strong safety culture
  • Responsible to support achievement of the following critical success factors: Safety, Quality, Delivery/Lead-time Cost/Inventory Management and Cost of Quality
  • Responsible to assure all welding, heat-treating, and hard facing performed in Manufacturing is performed in conformance to all requirements by appropriately qualified personnel
  • Provide oversight to development and qualification of new procedures, processes, and personnel
  • Provide manufacturing support interface with Engineering, Sales, and Marketing to address potential manufacturability issues related to welding
  • Lean Implementation – Responsible for supporting implementation of Lean in processes as appropriate
  • Attack, understand the principles and drive down the cost of quality. Will be a metric for expectations
  • Drive Overall Equipment Effectiveness (OEE)
  • 4 years of manufacturing experience to include welding, fabricating work, and cost of quality reductions through 5 M’s and 8 D analysis
  • Solid working knowledge of welding, heat treatment, and materials
  • Print reading (GD&T); use of measurement tools/equipment; use of EDOCS, PRIME And OASIS
  • PC skills including spreadsheets, word processing, access, and power point
  • Familiar with and use of the ERP Business system Oracle
  • Problem solving/Data analysis skills/Statistical applications and Analysis
  • Lean Manufacturing, Synchronous Flow, SMED & TPM practices