Aviation Maintenance Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the aviation maintenance technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

  • Craft your perfect resume by picking job responsibilities written by professional recruiters

  • Pick from the thousands of curated job responsibilities used by the leading companies

  • Tailor your resume by selecting wording that best fits for each job you apply

AR
A Runolfsdottir
Alicia
Runolfsdottir
4622 Stroman Locks
Houston
TX
+1 (555) 982 8797
4622 Stroman Locks
Houston
TX
Phone
p +1 (555) 982 8797
Experience Experience
05/2014 present
Detroit, MI
Technician, Aviation Maintenance Flt Test
Detroit, MI
Technician, Aviation Maintenance Flt Test
05/2014 present
Detroit, MI
Technician, Aviation Maintenance Flt Test
05/2014 present
  • Perform basic aircraft handling activities, for example, towing, jacking, and assist with fueling in accordance with Flight Test Directives and OIM
  • Assist other employees in the performance of their duties within area(s) of qualification
  • Assist in working with production to build or assemble first aircraft and experimental/production equipment
  • Perform minor fabrication and modification of production aircraft parts in accordance with developmental and/or engineering specifications
  • Perform minor troubleshooting and/or minor repair of aircraft components and systems
  • May perform aircraft testing at offsite locations in support of other divisions and customers
  • Maintain company tools, equipment and work areas to department and company standards
01/2009 12/2013
Houston, TX
Technician, Aviation Maintenance
Houston, TX
Technician, Aviation Maintenance
01/2009 12/2013
Houston, TX
Technician, Aviation Maintenance
01/2009 12/2013
  • Document work performed per Inspection Procedures Manual (IPM)
  • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft
  • Access and re-install aircraft components, which obstruct the performance of assigned tasks
  • Assist Aircraft Engine Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft
  • Work on aircraft as well as in shops
  • Perform basic mechanical and electrical removals and installations
  • May perform Designated Inspector (DI) function as qualified by QA
05/2005 11/2008
Boston, MA
Aviation Maintenance Technician
Boston, MA
Aviation Maintenance Technician
05/2005 11/2008
Boston, MA
Aviation Maintenance Technician
05/2005 11/2008
  • Performs work in accordance with approved or accepted data
  • Establish schedules for periodic inspections, general overhaul, repairs and modifications
  • Yearly Budgets of accounts, Bill paying and Tracking of Expenses. Assist with preparation of short and long range plans as well as the annual operating budget
  • Prepares and maintains documentation related to work activities in accordance with regulations and Company policies
  • Maintains upkeep of work area, materials and tools
  • Performs maintenance on Company equipment
  • Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on
Education Education
Bachelor’s Degree
Bachelor’s Degree
Florida Atlantic University
Bachelor’s Degree
Skills Skills
  • Should be able to demonstrate PC proficiency in MS Word and Excel as well as learn any corporate or industry software used by the position
  • Excellent interpersonal skills
  • Excellent written and oral communication skills
  • Excellent verbal and written communications skills
  • Ability to apply creativity and problem solving skills in troubleshooting work
  • Ability to learn and utilize the Company’s maintenance information system (Ramco)
  • Ability to get along with co-workers and peers
  • Ability to express or exchange ideas verbally with peers, clients, and public
  • Sheet metal and composite repair procedures
  • Maintenance of regular attendance and punctuality within customary tolerance
Create a Resume
1

Aviation Maintenance Technician Resume Examples & Samples

  • Maintain corporate aircraft in accordance with current Federal Aviation Administration regulations
  • Perform aircraft inspections required by regulation
  • Prepare required aircraft logbook entries
  • Work with engineering department to develop aircraft installations of company products
  • Modify standard and experimental aircraft as directed in accordance with current regulations
  • Assist in creation of documentation for new aircraft installations
  • FAA Airframe and Powerplant Mechanic Certification with current Inspection Authorization
  • Familiarity with Federal Aviation Regulations, parts 1, 21, 23, 25, 39, 43, 45, 61, 91, 121, 135
  • 10 years experience maintaining FAR part 23 and part 25 aircraft
  • Familiarity with Federal Aviation Regulations, parts 27, 29
  • Current Commercial and Instrument pilot certificates
2

Aviation Maintenance Technician Resume Examples & Samples

  • Aviation Maintenance Tech must maintain aircraft in compliance with Federal Regulations and Aircraft Manufacturer Requirements as well as policies specified in Cabela's Flight Operations Manual
  • The major objective of the Aviation Maintenance Tech is to keep Company aircraft safe!
  • Must have A+P (Airframe and Powerplant documentation) and IA (inspection authorization) in addition to factory Training program on each aircraft model
  • Ensuring compliance with Airworthiness Directives. Must sign off and make a legal declaration that our aircraft meets the type design and is in condition for a safe and legal flight. This position has authority to start / stop / delay a flight and declaration must be made by this position before the pilot may take command of the aircraft
  • Maintain aircraft as per Hawker Beechcraft Continued Airworthiness Inspection program and Federal Aviation Administration Regulations
  • Establishing requirements for hangar space, grounds and a fuel farm, monitoring environmental affairs, including completing material safety data sheets on all chemicals, fire drills and safety training. Coordinate activities of the maintenance department with flight operations and ensuring that maintenance and flight-crew personnel understand the company's objectives and each other's needs
  • Performing inspections, preventative maintenance, troubleshooting and replacement of parts on the aircraft. Determines aircraft parts needs and will order and then install the parts. At times will oversee the mechanical work of 3rd party mechanics and inspect their work. Works with Pilots to determine any discrepancies or problems with the aircraft and troubleshoot what the actual problem is and then repair. In addition to Airframe and Powerplant, this position is responsible for avionics (radar, flight control, flight computer; ie. the brains of the aircraft. This is usually a separate job). Maintaining Aircraft Records
  • Maintain aircraft records with regulations to ensure aircraft meets type design, parts have trace-ability and aircraft is legal to operate. Ensuring Safe maintenance and line operations as well as supervise maintenance personnel. Establishing maintenance safety rules and procedures as well as spares and ground support equipment inventories. Make sure that the department personnel are thoroughly familiar with company policies, appropriate FARs, pertinent manuals, practices and publication
  • Maintaining shop, equipment, hangar tools, equipment and aircraft parts/consumables inventory. Will order and calibrate special tools needed to maintain the aircraft and hangar
  • Operate company aircraft within compliance of FAR's by setting up Minimum Equipment list and Non Essential Equipment list . Establishing and maintaining records as required by FARs, manufacturers and company policy. Ensure the quality of the aircraft, engine and avionics maintenance and repair
  • Conduct Pre and Post Flight Inspections
  • Watching Local Weather
  • Assisting other flight department personnel in monitoring and maintaining fuel farm, records and fuel inventories. Has authority to accept jet fuel (amount, type, additives, weight, etc.) and performs quality control chemical testing to determine that the fuel meets our standards. After hire must complete FAR-139 training to ensure that the fuel is appropriate. Responsible for the storage and disposal of all hazardous materials in the hangar
  • Yearly Budgets of accounts, Bill paying and Tracking of Expenses. Assist with preparation of short and long range plans as well as the annual operating budget
  • Refueling aircraft and moving the aircraft in and out of the hangar via tug. Cleaning and restocking the aircraft. Assisting flight crew in pre-flight checks. Performing post-flight checks
  • Facility Maintenance
  • Monitor security and environmental affairs, perform facility maintenance and ensure compliance with regulations
  • Establish schedules for periodic inspections, general overhaul, repairs and modifications
  • Assisting passengers in any appropriate manner. Provides superior customer service to all passengers including: moving passenger vehicles, assisting passengers on and off the aircraft, etc. Customer Service
  • Flight Scheduling Backup, Assisting Passengers with whatever needed
  • Vocational/Technical School Certificate
  • 4 to 6+ Years experience
  • Experience with Airframe and Powerplant is required
  • RII (Inspector) is preferred
  • IA is preferred
  • Prefer candidate that has successfully completed the manufacturer's factory training for each make and model of aircraft the company owns
3

Senior Aviation Maintenance Technician Resume Examples & Samples

  • Conducts aircraft inspection, maintenance, repair, inspection, and modification using acceptable methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, other approved data, and established policies/procedures
  • Promptly addresses aircraft squawks reported by flight crews
  • Completes aircraft records and the corresponding inspection records, reports, and forms to accurately document the status of the aircraft in accordance with Repair Station and FAA requirements
  • Works cooperatively with engineering personnel to maintain configuration of flight test aircraft
  • Works cooperatively with engineering personnel to accomplish the design, implementation, testing, and certification of Garmin products and their installation
  • Accept and complete projects and other miscellaneous duties as assigned
  • FAA Airframe and Powerplant Mechanic Certification with Inspection Authorization or ICAO equivalent
  • Thorough knowledge of FAA regulations applicable to aircraft maintenance, modification, and operation
  • A minimum of 10 years experience working with general aviation aircraft performing a role substantially similar to the essential functions of this job description
  • Extensive experience with maintenance of piston powered genereal aviation airplanes
  • Must demonstrate experience with all aspects of aircraft maintenance and operation, including thorough knowledge of reciprocating and turbine engines and accessories
  • Demonstrated proficiency using Microsoft Office products
  • FAA DAR Certification or experience as FAA/DMIR
  • Extensive experience with Beechcraft, Mooney, and Cessna piston aircraft
4

Technician, Aviation Maintenance Resume Examples & Samples

  • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft
  • Document work performed per Inspection Procedures Manual (IPM)
  • Assist with complex repairs at on-site and off-site locations
  • Support production aircraft under Production Certificate System
  • May perform Designated Inspector (DI) function as qualified by QA
  • Troubleshoot aircraft for problems during routine inspections
  • You will have typically 2 years general aircraft experience which must include a minimum of 1 year of experience on jet aircraft
5

Technician, Aviation Maintenance Resume Examples & Samples

  • Must be able to work unscheduled overtime including nonscheduled work days and holidays
  • Must be able to work in seasonal/inclement weather outside
  • Must have the ability to be available for considerable travel with 2 hours’ notice, to include extended assignments lasting up to 30 days
  • Interpersonal skills necessary to establish and maintain effective working relationships with assigned employees, other business areas, contractors, and customers
6

Technician, Aviation Maintenance Flt Test Resume Examples & Samples

  • Assist in working with production to build or assemble first aircraft and experimental/production equipment
  • Prepare major aircraft sections for mating
  • Perform final assembly, install, and modify first aircraft components, systems, and sub-assemblies, for example, landing gear, engines, flight control surfaces, experimental equipment, and tire build-up
  • Perform minor fabrication and modification of production aircraft parts in accordance with developmental and/or engineering specifications
  • Fabricate and modify production or experimental aircraft parts in accordance with developmental and/or experimental engineering specifications
  • Perform maintenance on experimental aircraft in accordance with applicable technical data
  • Perform inspection, adjust, repair, and/or replace components to correct any malfunction or deficiency with and without power applied to aircraft
  • Prepare equipment and aircraft article for functional testing
  • Assist engineering and vendors with troubleshooting functional tests results and repair, modify, replace, and/or route back to vendor depending upon component
  • Assist engineering with revising functional test procedures as required
  • Set-up fixtures to perform static tests, fatigue tests, pressure tests, bird strikes, and assemble aircraft sections
  • Prepare aircraft components and systems and perform nondestructive/destructive testing, for example, cycle tests and ultimate load test
  • Assist with aircraft set-up in accordance with various flight test configurations to assess in-flight handling characteristics of experimental aircraft
  • Perform minor troubleshooting and/or minor repair of aircraft components and systems
  • May perform aircraft testing at offsite locations in support of other divisions and customers
  • Inspect, maintain, and/or repair ground support equipment as required
  • Perform basic aircraft handling activities, for example, towing, jacking, and assist with fueling in accordance with Flight Test Directives and OIM
  • Actively participate in process improvement initiatives as directed or assigned
  • Maintain company tools, equipment and work areas to department and company standards
  • An A&P License is preferred
  • You have basic knowledge of safety and operating procedures for power-on aircraft systems
  • You have the ability to read and interpret aircraft engineering documents and drawings
  • You are able to obtain and renew certifications, for example, tug operators license, powered lift operation,
  • You have basic sheet metal skills
  • You are able to use and interpret a variety of precision measurement instruments
  • You have the mechanical ability to use basic hand tools, for example, rivet gun, drill press, surface grinder, belt sander, sheet metal roller, and 90 and 45 degree drills
7

Aviation Maintenance Technician Resume Examples & Samples

  • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations
  • Access and re-install aircraft components, which obstruct the performance of assigned tasks
  • Perform basic mechanical and electrical removals and installations
  • Perform engine removal and installation
  • Perform structural modifications or repairs
  • Troubleshoot and perform repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges
  • Assist with fueling/defueling aircraft as required
  • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, and loads and secures ballast and/or freight as required
  • Assist Aircraft Engine Technicians and Electronic/Avionics Technicians in troubleshooting and repairing aircraft
  • Support aircraft manufacturing of prototype and flight test aircraft at off-site locations
  • Assist with troubleshooting and repairing interior and/or mechanical and electrical components per applicable flight test procedures during test flights
  • Fabricate and assemble aircraft parts per engineering specifications
  • Operate ground support equipment (GSE), for example, tugs, jacks, nitrogen and oxygen servicing
  • Work on aircraft as well as in shops
  • You will have an A&P license
8

Aviation Maintenance Technician, Helicopter Resume Examples & Samples

  • Candidates may substitute U.S. Armed Forces military service experience as a non-commissioned officer in the Aviation Machinist Mate classification or Aviation, Aerospace Maintenance, or Aircraft Maintenance specialty codes in the Aviation Maintenance field of work on a year-for-year basis for the required experience
  • Employees in this classification may be assigned duties which require the operation of a motor vehicle. Employees assigned such duties will be required to possess a motor vehicle operator’s license valid in the State of Maryland
  • Employees in this classification may be required to provide the facility with a telephone number at which they can be reached or they may be furnished with a pager
  • Employees in this classification must have access to an automobile for use on official business in the event a State vehicle cannot be provided. Standard mileage allowance will be paid for use of a privately owned vehicle
9

Technician, Aviation Maintenance Flight Test Resume Examples & Samples

  • You have the ability to gain foreign work visa's and work in foreign countries
  • You have typically 1 year aircraft mechanical system experience and aircraft sheet metal experience or special skill as required by department
  • You have working knowledge of aircraft systems
  • You have knowledge of computer programs including but not limited to Flight Preparation System (FPS) Electronic break of Inspection (EBOI) and Electronic Tie In, in support of daily aircraft operations
  • You have the ability to operate ground support equipment, for example, hydraulic mule, service carts, ground power units, and powered lifts or other engine powered vehicles
  • You have basic knowledge of regulations for FAA, JAA, Transport Canada, and other governing aviation agencies
  • You have basic knowledge of flight-line ground safety procedures
  • You are able to operate computer
10

Aviation Maintenance Technician Intern Resume Examples & Samples

  • Consider safety as the highest priority in completing his/her duties
  • Be knowledgeable in aviation safety programs and safety management systems
  • Possess knowledge of aviation regulations
  • Assist the maintenance staff with daily operational duties
  • Assist in aircraft inspection, servicing and cleaning
  • Assist with ramp operations and ground support equipment
  • Assist in operational projects that enhance the efficiency of the flight department
  • Assemble class materials for meetings and acts as the meeting scribe for operation, safety and staff meetings
  • Assist technicians with aircraft, I-pad and laptop software and databases
  • Must be a current student enrolled in an aeronautical science or related field
  • Must be at least a sophomore
  • Must have a minimum of one semester remaining at the completion of the internship
  • Must be working toward FAA A+P licenses or Avionics certifications
  • Minimum of a 3.0 GPA required
  • Knowledge of Microsoft Word, Excel, PowerPoint, and Outlook required
  • Must maintain high levels of confidentiality and customer service
11

Aviation Maintenance Technician St Louis RTC Resume Examples & Samples

  • Conducts necessary troubleshooting and/or repair (either on or off wing) on turbine engines
  • Evaluates engine parts to determine which parts are repairable or unrepairable; refers to micrometers and other precision-measurement tests to determine further routing to other destinations or to scrap parts
  • Utilizes applicable database system in order to retrieve information regarding parts inventory, manufacturing models, serial numbers, and/or other pertinent information to ensure proper documentation
  • Customer contact and travel may be required
  • General facility cleaning and maintenance
  • Should have (1-5) years or more experience in gas turbine engine/components maintenance and repair
  • Previous engine maintenance experience in the aerospace field on turbine engines; Rolls Royce M250, RR300, and or PW200 experience preferred
12

Aviation Maintenance Technician Resume Examples & Samples

  • Inspection authorization certificate preferred
  • Ensures all maintenance operations are conducted safely
  • Responsible for determining airworthiness and safety of the aircraft for each flight
  • Maintains the company’s aircraft in accordance with the manufacturer’s continuing airworthiness instructions, federal aviation regulations, company directives and the highest standards of airworthiness and appearance
  • Responsible for the strict adherence to the inspection system employed for assigned aircraft
  • Complies with the manufacturers’ technical data, FAR, and other applicable safety rules
  • Performs the maintenance duties including preflight, post flight, departure, recovery, interval inspections and aircraft repairs
  • Completes airworthiness directives issues by the FAA and mandatory service bulletins issued by the manufacturer
  • Ships, receives and inspects aircraft parts
  • Maintains inventory of consumables (such as grease, gaskets, and filters)
  • Performs log book research; maintains and completes accurate and comprehensive log book entries
  • Keeps current in all categories and class of certifications and maintain good standing, including FAA Mechanic certificate and Airframe and Powerplant certificate
13

Aviation Maintenance Technician Resume Examples & Samples

  • Conduct performance/functional testing as necessary to demonstrate the item’s ability to properly perform and records findings of any required inspection on proper forms
  • May, when authorized, observe aircraft and engine operation in flight and/or run up engines on aircraft
  • May perform a hidden damage evaluation during disassembly of any item delivered for maintenance where it is known or suspected that the item has experienced any over stress, such as crash or hard landing, fire, etc. An examination of damage and condition of all parts adjacent to those found damaged may also done as directed
  • Perform any combination of assigned assembly, disassembly, testing, and preservation tasks conducted in the process of returning to service any engine, module, accessory or part for which the Repair Station is rated, according to their ability and certification to perform such work. Such activities may include
  • Check in, stripping, cleaning or inspecting engines/components
  • Build engines/products to defined standards
  • Perform dimensional measurements and calculations during assembly operations
  • Prepare engine/components for testing and further inspections/processes; and,
  • Assist in training other team members as appropriate to maintain best practices standards
  • Upon completion of a specific task the incumbent will maintain notes and sign off the paperwork/records using his/her initials indicating the item is ready for handoff/turnover to other repair station personnel
  • Responsible for keeping a clean and orderly work area and ensuring that FOD preventions practices are followed in their work area
  • Inform and advise employees in lower rated jobs to perform specific assignments in order to accomplish repair and overhaul
  • Maintain DAI image and relate in responsible manner to customer manufacturers and government reps
  • Utilize electronic databases in order to retrieve information regarding aircraft parts inventory, manufacturing models, serial numbers/pertinent information to ensure correct engine documentation
  • Flight line work to include towing and parking of aircraft using necessary ground support equipment
  • Travel as required to perform repairs and engine changes at customer facilities and in the field
  • Should have four to six (4-6) years preferred of related experience in diversified engine and aircraft operations including disassembly, cleaning, inspection rework, assembly, rectification, flight line, airframe and electrical work as related to engines on aircraft serviced by DAI
  • Ability to express or exchange ideas verbally with peers, clients, and public
  • Ability to get along with co-workers and peers
  • Maintenance of regular attendance and punctuality within customary tolerance
  • Shop Work: exerting up to (25-50) pounds of force occasionally and/or a negligible amount of force frequently to lift, carry, push, pull or otherwise move objects
  • Work involves walking, sitting, driving or standing for brief periods of time
  • Near clarity of vision is required for close up engine and chart/document analysis
  • Reaching: extending hands and arms in any direction
  • Handling: seizing, holding, grasping, turning or otherwise working with hand(s). Fingers are involved to the extent that they are an extension of the hand, such as to turn a switch or shift gears such as picking, pinching or otherwise working primarily with fingers rather than with the whole hand or arm as in handling
  • Talking: expressing or exchanging ideas by means of the spoken word to impart oral information to convey detailed spoken instruction to other workers accurately, loudly or quickly
  • Hearing: perceiving the nature of sounds by ear
  • Engine shop environments, including: hoists, heavy parts, chemicals and fluids with use of precision instruments, stringent housekeeping and work area safety regulations and practices to observe and maintain
  • Environment may include brief periods of elevated noise exposure due to engine testing
14

Aviation Maintenance Technician Resume Examples & Samples

  • Disassembly and assembly of various models of turbine engines according to sequence utilizing aircraft tools, balance machines, surface grinders, drill presses, and other equipment for repair and/or overhaul
  • Receives engine parts to conduct inspections using precision measuring tools in order to detect physical defects such as cracks, burns, foreign object damages, proper screws and structure deviations
  • Inspect aircraft engine parts to determine and/or perform NDT requirements
  • Refers to technical publications, specification sheets and/or other regulatory requirements in order to ensure that all tasks have been completed in proper sequence and required signed-off
  • FAA Power Plant license (preferred)
15

Aviation Maintenance Technician Resume Examples & Samples

  • Evaluate engine components per manufacturer criteria with calibrated precision measuring equipment to determine serviceability/reparability
  • Inspect turbine engine components using non-destructive inspection methods such as fluorescent penetrant and magnetic particle machinery
  • Utilize DAI controlled documents and computer databases to record pertinent data pertaining to components being inspected
  • Assure that all inspections and repairs are properly performed according to current technical data and all inspection records and forms used by the repair station are properly executed prior to the release and return to service of the product being maintained
  • Research aircraft and engine logs for current engines times and cycles to determine life limited component status, outstanding FAA Airworthiness Directives and compliance with as directed
  • Complete all required logbook/FAA form 8130 entries of maintenance and repair per FAR 43
  • Notify the immediate supervisor regarding any discrepancies such as blue print and diagram variances, and/or improper tag documentation as needed
  • A&P license required with well-developed technical knowledge of specific types and models of aircraft turbine engines
  • Must be able to speak, read, and write in the English language
  • Must possess a valid driver's license
  • Must possess effective written and verbal communications skills
  • Must have proper hand tools
  • Should be able to demonstrate PC proficiency in MS Word and Excel as well as learn any corporate or industry software used by the position
16

Aviation Maintenance Technician Resume Examples & Samples

  • Responsible for advising the Pilot in Command (PIC) of any maintenance issues that would take an aircraft out of service
  • Electrical troubleshooting and refined vibration-balancing
  • RAMCO experience preferred
17

Lab Technician, Aviation Maintenance Resume Examples & Samples

  • Perform light maintenance on aircraft
  • Lab and hangar maintenance and organizatiton
  • Building and developing training aides
  • Assisting faculty with day-to-day operations
  • Moving aircraft and arranging aircraft as needed
  • Assisting with school open house events
  • Internet research
  • Tool room monitoring and Tool room distribution to students
  • Tool room attendant
  • Enrolled in the aviation maintenance program
  • 5 GPA
  • Welding skills
  • Sheet Metal skills
  • Telecommunication skills
  • Strong ability to problem solve
  • Physically able to lift a minimum of 50 lbs
  • Self motivated
  • Able to pass a background check
  • Problem solving skills
  • Willingness to be productive
  • Teachable
  • Basic processing and dexterity skills
  • Ability to follow directions and complete assigned tasks
  • Competent hand writing and typing skills
  • Sheet metal- riveting and layout
  • Welding- arc and gas shielded
  • Comprehend FAA and Airport Regulations
  • Internet navigation
  • Cleaning of lab areas and hangar area
  • Answering telephones and forwarding pertinent information
  • Copying
  • Helping instructors with basic classroom tasks
  • Returning training aides to stowage locations
18

Relief Aviation Maintenance Technician Resume Examples & Samples

  • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations,company policies and procedures, and applicable maintenance manuals to include specific chapters
  • Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensureprompt repairs for operational readiness
  • Responsible for correcting compliance or safety issues when directed by the Director of Operations, Director of Maintenance, Chief Pilot, Regional Maintenance Director, Director of Safety, Regional Maintenance Manager, or Lead Mechanic
  • Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on
  • Provide timely on call availability during nights, weekends, and holidays if necessary
19

Aviation Maintenance Technician Lead Resume Examples & Samples

  • Provide input to staff evaluations as requested by Area Manager/RCM
  • Responsible for auditing program maintenance locations for aviation parts and supplies, tool calibrations, safety concerns and all other base needs to ensure prompt repairs for operational readiness
  • Receives feedback related to flight issues/concerns, to include RSQ911 feedback; assists in resolution of issue and/or refers matter to appropriate person for resolution
  • Attends hospital/program meetings or training
  • Collaborates with other discipline leads regarding maintenance and operation of the program
  • Assists Area Manager with employee scheduling
  • Function as a resource for dissemination of new information and problem resolution
  • Ensures all maintenance publications and company manuals are current and available to maintenance personnel
  • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations and company policies
  • Sends a copy of the Mechanical Interruption Summary or Service Difficulty Report to Program Maintenance Manager or if applicable the Regional Maintenance Director for review
  • Responsible for correcting compliance or safety issues when directed by the Director of Operations, Director of Maintenance, Chief Pilot, Regional Maintenance Director, Director of Safety, or Program Maintenance Manager or Area Manager
  • Responsible for thorough knowledge of Air Methods General Maintenance Manual, field Mechanics Procedures manual, Air Methods’ policies and procedures as well as meeting operational goals and objectives
  • Responsible for validating or confirming the data in the Status Report concerning the aircraft being worked on including
  • Associate’s degree (A.A./A.S.) or equivalent from two-year college or technical school; and five years’ related experience and/or training; or equivalent combination of education and experience
  • Manufacturers training on company specific aircraft preferred
  • Ability to read and understand various documents such as 337’s, Service Bulletins, AD’s, etc
  • Ability to multi-task in a fast paced, constantly changing environment
  • Ability to work a flexible schedule including overtime and 24/7 on-call rotation when needed
20

Aviation Maintenance Technician Lead-repair Station Resume Examples & Samples

  • Carrying out direct maintenance, inspection and administrative tasks in accordance with their training and experience to ensure team, departmental and organizational goals are met
  • Provide leadership and direction to assigned team members to ensure team, departmental and organizational goals are met
  • Interface with Production Planner and Supervisor to determine and agree production priorities and objectives. Highlighting/resolving issues that may impact those priorities and objectives
  • Assign resources to required tasks based on production priorities as well as the experience and capability of team members
  • Liaison with Production Planner, Purchaser on material related issues so that planned work is completed against budgeted targets
  • Ensure all appropriate quality standards are attained by team. Reporting quality failures through approved company policies and procedures
  • Ensure budgets (man-hour and TAT) are met for assigned work by ensuring efficient utilization of resources
  • Report key operational performance data from their teams and tasks being carried out
  • Conduct daily team meetings
  • Develop effective communication and co-operation within the production team and between other stakeholders within the organization
  • Build employee satisfaction by making the workplace environment a positive place to work
  • Conduct ongoing evaluation of employee performance using the company performance evaluation guidelines
  • Develop and support individual training plans for team members, provide training as required
  • Instigate and implement disciplinary action in accordance with company procedures
  • Ensuring all work practices are carried out in a safe way. Intervention and reporting when any instances of non-compliance to safety procedures are observed
  • Support and implement Lean processes and foster a culture of ongoing continuous improvement
  • Ensure tools and equipment held or utilized in area of responsibility are maintained and stored appropriately and in accordance with relevant procedures
  • Airframe & Powerplant (Must meet the recent experience requirements of FAR 65.83)
  • Five years turbine powered rotorcraft maintenance experience
  • A minimum of 1 year experience supervising people
  • Familiarity with Repair Manual Documentation procedures, ATA concepts, and Standard Practice Manuals is required
  • Must have OEM or AMO accredited training specific to Air Methods component models
  • Experience successfully working in a manufacturing or a repair and overhaul environment, with a proven track record
  • Self motivated and results oriented with a focus on quality, analytical thinking and attention to detail
  • Ability to make excellent decisions and set appropriate priorities
  • Excellent listening, verbal, and written communication skills
  • Excellent collaborative problem solving skills
  • Ability to work in a rapidly evolving and dynamic environment
  • Demonstrated team player with excellent interpersonal skills
  • Must be willing to accommodate flexible working schedules, including shifts and overtime
  • Must be willing to travel internationally if required
  • Previous Bell Helicopter BHT407 and/or Airbus AS350/EC130/EC145/EC135 maintenance experience
  • Solid computer and ability to get assigned tasks completed in a timely manner with highest
  • Ability to apply creativity and problem solving skills in troubleshooting work
  • Ability to utilize and train the Company’s maintenance information system (Ramco)
21

Aviation Maintenance Technician Senior Resume Examples & Samples

  • Serves as Lead Mechanic in the absence of the Lead Mechanic
  • Performs inspections and repairs of aircraft and components in accordance with maintenance procedures, airworthiness directives, service bulletins, service letters, and applicable Federal Aviation Regulations
  • Upon installation or removal of any component or assembly, the Mechanic shall verify by physical inspection or markings on the part that the part number and serial number match the associated documentation (Status Report, if item is tracked), Parts Tag, 8130-3, 337, or any other maintenance release
  • Ensures all aircraft maintenance documentation is executed in compliance with applicable Federal Aviation Regulations, company policies and procedures, and applicable maintenance manuals to include specific chapters
  • Request aviation parts and supplies in order to maintain an adequate and orderly inventory of all stock items to ensure prompt repairs for operational readiness
  • Maintains work area in a clean and professional manner
  • Responsible for validating or confirming the data in the Status Report concerning the aircraft he or she is working on including
  • Responsible for mentoring mechanics within all maintenance and operational functions at the base and providing on the job training (OJT)
  • Troubleshoots and provides over-the-phone and on sight problem solving to outlying mechanics
  • High school diploma or general education degree (GED) and 2 to 5 years’ related experience and/or training; or equivalent combination of education and experience
  • Factory airframe/power plant schools preferred
  • FAR 135 operations preferred
  • Ability to be a team player with a professional attitude
  • Ability to work a flexible schedule including overtime and 24/7 on-call rotation
22

Aviation Maintenance Technician Resume Examples & Samples

  • Previous engine maintenance experience in the aerospace field on turbine engines; Rolls Royce and/or Pratt and Whitney experience preferred
  • FAA Power Plant license required or must be acquired within 1 year of job award
  • FAA Airframe license (preferred)
  • Level II NDT Certification (preferred)
  • Computer literacy skills are required
  • Must be able to read, interpret and understand technical manuals, work specifications and written work instructions, ability to read micrometers and other precision-measuring instruments
  • Maintenance of regular attendance and punctuality with customary tolerance
  • Work involves walking, sitting, driving or standing for brief periods of time. Near clarity of vision is required for close up engine and chart/document analysis
  • The job requires careful diligence/attention in performing duties under normal mental stresses commonly associated with detailed mechanical/technical work
  • May have occasional exposure to outside weather conditions
23

Aviation Maintenance Technician Resume Examples & Samples

  • Performs maintenance, repairs, overhauls, inspections, and alterations of Company operated aircraft and articles as assigned
  • Performs work in accordance with approved or accepted data
  • Ensures compliance with FAA regulations, manufacture's recommendations, and Air Methods’ standards
  • Performs maintenance on Company equipment
  • Ensures all referenced data including but not limited to maintenance manuals, service bulletins, parts books, regulatory updates, and other technical directives are the current distributed revisions available
  • Cleans and maintains interior and exterior of aircraft
  • Maintains upkeep of work area, materials and tools
  • Prepares and maintains documentation related to work activities in accordance with regulations and Company policies
  • Performs duties of the Lead Mechanic in the absence of incumbent (as designated)
  • Mentors and trains less experienced Mechanics
  • Three years turbine powered rotorcraft maintenance experience
  • Tools appropriate for the job
  • Demonstrate the ability to work respectfully and collaboratively with others
  • Desire to be part of a team
  • Work to be inside and outside in various kinds of weather
  • Ability to lift up to 75 lbs
  • Manufacture’s training on company specific aircraft is preferred
  • Previous Bell Helicopter BHT407 and/or Airbus AS350/EC130 maintenance experience
  • Ability to learn and utilize the Company’s maintenance information system (Ramco)
24

Temporary Aviation Maintenance Technician Resume Examples & Samples

  • Actively participates in the continuous improvement phase (level 4) of the company’s Safety Management System (SMS) and is familiar with the SMS policies, processes, and procedures
  • AP Mechanic Certification Required
  • Minimum of 2 years Aviation Maintenance Technician experience required
  • Sheet metal and composite repair procedures