Welder Resume Samples

4.5 (121 votes) for Welder Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the welder job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
SC
S Collins
Stacy
Collins
715 Frederic Unions
Houston
TX
+1 (555) 353 6371
715 Frederic Unions
Houston
TX
Phone
p +1 (555) 353 6371
Experience Experience
Boston, MA
Welder
Boston, MA
Stamm-Schamberger
Boston, MA
Welder
  • Maintain a safe, clean and orderly work environment by following all safety protocols and performing routine housekeeping and workplace organization
  • Assist in the development of work instructions
  • Performs all work in accordance with established safety procedures, documenting parts usage, and accounting for repair times
  • Perform all work in accordance with established safety procedures
  • Read and interpret instructions and documentation and plans work activities. Moves materials and equipment to work locations and sets up work site
  • Observes all company policies, works shift work, and is consistently at work on time
  • Perform work in a professional and safe manner, report unsafe work practices
present
Los Angeles, CA
Welder
Los Angeles, CA
Gislason-Sauer
present
Los Angeles, CA
Welder
present
  • Uses various tools provided in the work area to perform welding duties to perform welding duties including but not limited to
  • Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly
  • Responsible for refusing unsafe work and for carrying out all work in accordance with the established HSES Safety Standards and Work Practices
  • Make continuing improvements and work within LEAN guidelines for continuous process improvement
  • Maintains a clean, safe work area in compliance with Corporate / OSHA Standards, and performs all work in accordance with established safety procedures
  • Performing any combination of duties to assist workers in welding, brazing, and thermal and arc cutting activities
  • Performs all work in accordance with established safety procedures
Education Education
Bachelor’s Degree in Quality
Bachelor’s Degree in Quality
Ashford University
Bachelor’s Degree in Quality
Skills Skills
  • Basic knowledge of the ability to use a variety of basic hand tools (e.g. wrenches, hammers, screwdrivers, scrappers, box cutters)
  • Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation
  • Provide evidence of the ability to read and interpret engineering drawings, basic knowledge of GD&T and welding symbols
  • General knowledge and ability to perform basic construction and utility tasks such as equipment operation, pipefitting, etc
  • Ability to learn product software quickly and operate software and CNC machinery proficiently
  • Able to define, evaluate and discuss quality workmanship related to welding
  • Knowledge of codes and industry standards applicable to work performed
  • Demonstrate good decision making skills and the ability to prioritize work
  • Knowledgeable of welding techniques and manufacturing processes through prior experience or training programs
  • Ability to analyst and update reports, forms, records and comparable methods of data collection tools
Create a Resume in Minutes

15 Welder resume templates

1

Welder Resume Examples & Samples

  • Reports to Shop Manager
  • Operate independently
  • Operate welding, burning and other shop equipment,
  • Responsible for their portion of required paperwork related to the implementation and completion of a job
  • Responsible for assisting Shop Manager, address all issues that arise in pipe & fabrication shop
  • Able to work alone or with minimal supervision
  • Must be able to read blue prints, and have essential math skills
  • Responsible for maintaining an inventory of welding materials, tools and supplies necessary to complete welding and burning tasks related to each job
  • Responsible for proper fit up and welding of materials
  • Performs other duties pertaining to the completion of the job at the direction of Shop Manager or other supervisor
  • Is required to ensure that they maintain safe work practices as required by company, policies and guidelines
  • Able to give and understand hand crane signals
  • Ensuring the job is complete, shop is clean and organized
  • Maintaining assigned equipment including repair, maintenance, cleaning, organize and stock for each job
  • High School Diploma or Equivalent
  • Valid welding certificate by an accredited testing facility
  • Comprehend and communicate complex oral and written instructions
2

Welder Resume Examples & Samples

  • Connect regular valves and bases to oxygen and fuel gas cylinders and welding torches
  • Hold torches at proper angles to joints to be welded
  • Apply filler rods to molten area to form welds
  • Weld, braze, and cut nitronics, aluminum, titanium, stainless steel, and SAE 4130 steels according to blueprint specifications and operation sheet instructions
  • Examine welds for bead size, penetration, and other specifications
  • Grind off excess slag or spatter
3

Welder Resume Examples & Samples

  • Ability to locate, identify and use proper fixtures and tooling to perform weld operations
  • Repair non-standard flaws with limited or no assistance
  • Use drawings, gauges, to ensure conformance to safety and quality specifications
  • Ability to perform operations with close tolerance and finish requirements on standardized parts
  • Conduct pre and post inspection on all welded parts
  • Assist in the development of new fixtures
  • Plan and make new or difficult setups with welding machine
  • Can effectively perform stainless steel, hardfacing, etc welding
  • Can effectively collaborate with Section Manager and Manufacturing Engineer
  • Assist other team members with technical issues and/or production problems
  • Efficiently perform all process as assigned
  • Perform general maintenance as required
  • Compliance with 5S programme and other business improvement initiatives
  • Attend planned training
  • Train other employees as and when required
  • Any other appropriate duties
  • Two years or more experience in a welding environment
  • Ability to perform welding activities with MIG/MAG (GMAW) and SMAW technology
  • Ability to understand drawings
  • Ability to manufacture quality products
  • Problem solving and Change Management
  • Strong commitment to Safety
  • Physically able to fulfill the job requirements
  • Welder qualification record
  • Previous experience working in a lean environment
  • Attention to detail to meet quality standards
4

Welder Resume Examples & Samples

  • Welding together fabricated piece parts by using semi-automatic MIG welder
  • 1 to 2 years of welding experience
  • Experience in vertical or overhead welding
  • Welding certification or associates degree
5

Welder Resume Examples & Samples

  • Reviews work order packet to determine the location of piece parts, fixture, and accuracy of the Bill of Material
  • Visually checks piece parts for quality and verifies that piece part quantity matches the blueprint. Reports any discrepancies to the Supervisor
  • Follows set-up guidelines and procedures to assemble and tack weld unit by using various tools such as drop chains, chain hoist, metal shims, wedges, lifting lugs, "C" clamps, bar clamps, com-a-long, cutting torch, grinder, tape measure, fixtures, and weld gauges
  • Sets the weld machine to correct setting for the weld application
  • Welds unit to print specifications following guidelines and procedure to control warpage on all common product built throughout the Weld Department to include: U-Blades (4-10,000 lb.), Hydraulic Angle Blades, Buckets (4-8000 lb.), Excavator Buckets, Lift Groups, and Quick Couplers
  • Uses air arc and grinder to remove or repair unacceptable welds in order to meet quality guidelines
  • Inspects welds and checks critical measurements upon completion to ensure they meet specifications and criteria
  • Experience welding on 1/2" thick steel
  • Experience with spray arc welding
6

Welder Resume Examples & Samples

  • Manual MIG Welding
  • Ability to clear common robotic welding system faults in all qualified work stations
  • Must be able to inspect own work including quality checks utilizing weld and attribute gages and other measuring tools
  • Mechanical job duties may include the following
  • Complete routine maintenance (wire change, tip/nozzle change) in all qualified work stations
  • Follows documented procedures, standard work, routings, and blueprints to perform safe and defect free operations
  • Contributing team member
  • Ability to sit or stand for prolonged periods
  • Ability to perform repetitive operations
  • Ability to lift up to 35 lbs
  • Completion of Welder 1 observation period at valued performance level
  • Must be able to demonstrate proficiency with carbon air arc weld removal
  • Must be able to pass the following AWS D1.1welder qualification tests
7

Welder Resume Examples & Samples

  • Verify accuracy of the Bill of Material
  • Verifies that piece part quantity matches the blueprint
  • Reports discrepancies
  • Welding Certification or 5 years of Welding experience
  • Knowledge of welding applications
  • Knowledge of U-Blades (4-10,000 lb.), Hydraulic Angle Blades, Buckets (4-8000 lb.), Excavator Buckets, Lift Groups, and Quick Couplers
  • Certified Welder
8

Welder Resume Examples & Samples

  • Clean parts to existing weld specs
  • Placement of parts in fixture in proper sequence
  • Ensure dimensional accuracy before and after tack welding
  • Tack weld parts in proper sequence using WPM or SW when it exists
  • Remove weldment safely from fixture and move to work table/horses/positioner
  • Set welder to prescribed settings
  • Ability to weld item completely; ensure all welds and surfaces meet Cat quality standards per
  • 1E specifications
  • Operates sanders, wire wheels and other tools used to clean weldments for paint readiness
  • Reports all discrepancies to Team Lead
  • Does required daily inspections of lifting devices, tools, etc. to ensure safe work environment
  • Uses all PPE required for work classification
  • Ability to troubleshoot fit up issues, complex welding and/or welder malfunctions
  • Works well with minimal direction, can locate and interpret relevant Standard Work and
  • Ability to skillfully perform all welding processes ie SAW, GMAW and CAC
  • Successful completion of the CPS Weld Instruction Course
  • Welding certification preferred and 5 years experience or 4+ years weld fabrication experience
  • Vocational weld training and production manufacturing weld experience
9

Welder Resume Examples & Samples

  • Ability to consistently achieve all PQVC requirements
  • Ability to troubleshoot fit up issues, intermediate welding and/or welder malfunctions
  • Welding certification preferred and 3+ years of weld fabrication experience or equivalent
10

Welder Resume Examples & Samples

  • Use blueprints, gauges, torque measuring devices and/or other equipment to ensure conformance to quality specifications
  • Ability to set-up, adjust and perform operations with close tolerance and finish requirements on standardized parts
  • Plan and make difficult or new setups with necessary equipment
  • 6 months of previous welding experience
  • Effective decision making, analytical, and problem solving skills
  • Ability to effectively interpret blueprints
  • Ability to organize and prioritize work
  • 2-year tech school degree or equivalent experience
  • Knowledge and use of MIG/TIG welding and stainless steel fabrication is helpful
11

Welder Resume Examples & Samples

  • Must be currently enrolled in the Caterpillar Youth Apprenticeship Progam
  • Successful completion of Caterpillar Non-Management Selection Process
  • Must be able to pass the following AWS D1.1 welder qualifications during Cat provided weld training
12

Welder Resume Examples & Samples

  • Demonstrate familiarity with the manufacturing computer systems to maintain labor and shop order records
  • Maintain manual data collection systems such as Statistical Process Control (SPC) forms and charts, for the purpose of monitoring and controlling processes within each area of responsibility
  • Maintain inventory - raw material inventory, accuracy and cycle counting
  • Perform inspection function for the team as required (e.g., inspection, test, final test, Qualified Operator Program, Quality Control Designee)
  • This position may work second shift (3:00 PM to 11:30 PM) or a split shift when trained
13

Welder Resume Examples & Samples

  • Under the direction of supervision, plan and perform hand and machine welding to fabricate or repair parts of various thicknesses and metal groups
  • Prepare parts for welding, align and secure details, program computer controlled welding equipment, activate machine welding cycle or manipulate hand welding torch to complete welding cycle
  • Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operator's checklist for upkeep and assure equipment operates properly
  • Maintain appropriate metal joining certifications
14

Welder Resume Examples & Samples

  • Two or more years of welding experience preferred
  • Must be able to identify parts, read blueprints, micrometers, dial indicators, calipers and tape measures
  • Ability to be trained to operate an overhead crane and fork truck
15

Welder Resume Examples & Samples

  • Tack weld parts in proper sequence
  • Ability to weld item completely; ensure all welds and surfaces meet Cat quality standards
  • Able to achieve minimum requirements of PQVC
  • Performs entry level work under close supervision
  • Welding certification preferred and 1+ years of weld fabrication experience or equivalent
16

Welder Resume Examples & Samples

  • Ability to perform Standard Work (Safety, Quality and Velocity)
  • Provide support to the Manufacturing Engineers or Assembly Support 2 team members with Visual Instructions
  • Utilize systems such as MS office, MS Visio and lotus notes
  • Continuous Improvement projects
  • Ability to multitask and prioritize work
  • Ability to work independently with little supervision
17

Welder Resume Examples & Samples

  • Adhere to design specifications
  • Visually checks piece parts for quality and verifies that piece part quantity matches the blueprint. Reports any discrepancies to the team leader or section manager
  • Follows set-up guidelines and procedures to assemble and tack weld unit by using various tools such as drop chains, chain hoist, metal shims, wedges, lifting lugs, “C” clamps, bar clamps, com-a-long, cutting torch, grinder, tape measure, fixtures, and weld gauges
  • Sets the weld machine to correct setting for the weld application. Welds unit to print specifications following guidelines and procedure to control warpage on all common products built throughout the Weld Department
  • Uses air arc and grinder to remove or repair unacceptable welds in order to meet IE0099 Weld Specifications
  • Performs daily Operator Performed Maintenance (OPM), Labor Reporting, In Process Validation (IPV), 5S Operations
18

Welder Resume Examples & Samples

  • Perform standard repairs with limited or no assistance
  • Assist in the development of work instructions
  • Assist in identifying issues and initiating corrective action processes as necessary
  • Perform 5S Audits
  • Perform Safety Audits observations as required
  • Participate in the CI/PID Process
  • Any duties or tasks that may be assigned to promote cross training or support for various areas of the shop
  • Ability to train peers as needs
  • Follow the Caterpillar Production System (CPS) Standard Work Sheets
  • Successfully complete required weld qualification(s) within the first 90 days of employment
  • Promote a culture based on our Values in Action
  • Follow established facility safety policies, safe job procedures and hazardous risk assessments and using the proper Personal Protective equipment for the specific job being performed
  • Work with variety of employees throughout the day to effectively communicate needs and to perform job related tasks
  • Proven ability to work in a team setting
  • Serve as a positive role model and contribute to team effort by supporting all employees in our organization
  • Ensure customer requirements are met
  • Conduct business with the highest level of honesty and integrity
  • Ability to Interface with plant management, supervisors and production personnel
  • Ability to produce quality products
  • Highly motivated and a self starter
  • Ability to solve problems and deal with a variety of changing situations
  • Basic computer skills and ability to learn new applications
  • Certificate from an accredited welding program OR completion of Caterpillar’s sponsored upskilling program OR two-year tech school degree or equivalent experience preferred
19

Welder Resume Examples & Samples

  • Provide First Piece inspection to other welders or inspectors; including visual inspection of the quality of the weld, penetration, and verification the machine is properly set up and running in accordance to the set up sheet and router.- 10%
  • Examines workpieces for defects and measures to specification using appropriate gages. Checks and monitors workpieces before, during and after processing. – 5%
  • Completes manufacturing documentation, labor transactions, etc. with complete, accurate data. – 5%
20

Welder Resume Examples & Samples

  • Demonstrated skills using Gas Tungsten Arc Welding (TIG)
  • Apply hard face filler material to the shroud notches on nickel alloy turbine airfoils and perform plug welding or seal welding on other types of turbine components
  • Must be able to remain in a stationary position approximately 75% of the time
21

Welder Resume Examples & Samples

  • Knowledge of Lathe, Mill, grinder and similar tools
  • Knowledge of robotic welding/robotic programming
  • Knowledge of tool and fixture design
  • PFMEA/SFMEA support
  • Support standard work by conducting time studies
  • Assist with resolution of Safety CI Cards
  • Provide tooling support to the line as needed
22

Welder Resume Examples & Samples

  • Sets the weld machine to correct setting for the weld application. Welds unit according to print specifications following guidelines and procedures
  • Ability to inspect own work including quality checks utilizing weld and attribute gauges and other measuring tools
  • Ability to perform routine maintenance such as wire and/or nozzle tip changes
  • Ability to perform in station repair on defective welds utilizing air arc process, grinders, etc
  • Ability to use lifting devices for objects weighing more than 35 lbs
23

Welder Resume Examples & Samples

  • Perform Safety Stop Audits observations as required
  • Any duties or tasks that may be assigned to promote cross training or support for various areas
  • Must possess ability to deal with multiple tasks in a fast paced environment
24

Welder Resume Examples & Samples

  • Accurately read and follow procedures, routing and other work instructions
  • Accurately read blueprints
  • Demonstrate ability to perform welding and solder braze functions
  • Demonstrate proper use of simple hand and machine tools
25

Welder Resume Examples & Samples

  • Set up and operate manual and automatic welding machines according to specifications
  • Read and interpret blueprints and specifications sheets
  • Inspect and check dimensions using precision gauges and measuring instruments
  • Make adjustments to equipment to ensure quality parts are produced
  • Complete manufacturing documentation and labor transactions
  • Actively participates in the Continuous Improvement process as well as safety related activities
  • Over 40 hours is required as scheduled to meet business needs
  • Support and follow all rules/guidelines/standards set by EHS, Quality, and CI functions as set by your leader and position
26

Welder Resume Examples & Samples

  • Performs fusion welding on ground support equipment to a qualified Welding Procedures Specification (WPS), performs structural fusion welding on parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders
  • Read and understand engineering drawings and welding symbols, fabricates manufacture-welded parts from engineering drawing without direct supervision
  • Performs fusion welding and torch brazing for ground support equipment, ensuring the procedure is completed per the requirements of the national welding and brazing codes and specifications
  • Welds a wide variety of materials such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels
  • Must have knowledge of the materials to select the correct filler materials and shielding gas when generating the Weld Procedure Specification (WPS), and produce flight critical welds and assist in the development process of generating Weld Procedure Specifications as mandated by welding codes and specifications
  • Determines the sequence of welding in order to prevent or reduce the amount of warp to the weld, designs and fabricates weld holding fixtures as necessary to perform individual welding projects,
  • Performs pre-heat and post weld stress relief operations
  • Maintains weld records
  • May perform duties as a Qualified Weld Inspector by inspecting own welds and those of less qualified welders, and may perform duties such as training and re-certification in the various welding processes
  • High school diploma/equivalent and 3 years of progressive welder experience. Specific contract requirements will prevail
  • Current Certification for American Welding Society (AWS) D1.1/D1.1M:2010 Structural Welding Code
27

Welder Resume Examples & Samples

  • Demonstrates knowledge of plant system functions including maintenance work practices and divisional safe work practices
  • Operate company vehicles and equipment
  • Performs administrative functions in support of work unit such as timekeeping, materials support, cost monitoring, scheduling and quality control/quality assurance
  • Perform general housekeeping functions, as necessary
  • Use various hand/power driven and hydraulic tools and machinery
  • Perform root cause analysis, recommend and implement improvements to power plant equipment, processes, systems, and procedures. Inspect and furnish recommendations and estimates of repair within area of technical expertise
  • Collaborate with personnel in own and other organizations to resolve problems and recommend solutions based on highest level of technical expertise
  • Lead, train, and direct others in the performance of the work
  • Must recieve a rating of "Technically Qualified" on the NRG Energy Pre-Employment Assessment
  • Good oral and written communication skills required
  • Must be able to demonstrate proficiency in SMAW/GTAW welding processes
  • Ability to work rotating shiftwork, holidays, weekends and overtime
  • Ability to use and maintain tools and equipment in a safe and efficient manner
  • Ability to interpret and apply instructions, specifications, blueprints and procedures
  • Possess a valid jurisdictional driver’s license
  • Excellent communication skills (verbal and written) and time management skills
  • Ability to read, write and speak the English language
  • Ability to handle multiple task and meets stringent deadlines
  • Ability to perform work both indoors and outdoors, requiring continuous physical activity, sometimes of a strenuous an stressful nature
  • Ability to work in enclosed vessels or confined spaces
  • Ability to use various hand/power driven and hydraulic tools and machinery
  • Ability to use arms, legs, feet, and hands in a fully coordinated manner
  • Ability to climb ladders, bend, twist, kneel, crawl, pull/push and lift up to 50 pounds, stand, walk and squat for extended periods of time
  • Ability to work on or around energized electrical equipment
  • Ability to work at elevated heights including scaffolding
  • Ability to work alone in remote areas
  • Ability to work in areas with limited lighting
  • Ability to work in extreme temperatures ranging from very cold to very hot
  • Possess good hearing and vision
  • Ability to work in areas that may be noisy and dirty
  • Ability to wear a respirator and other job related personal protective equipment (PPE)
  • Ability to meet (on an annual basis) appropriate physical evaluations identified by NRG as prerequisites to performing certain task and training activities
28

Welder Resume Examples & Samples

  • Must possess a valid California Driver’s license
  • Ability to wear company provided Personal Protective Equipment
  • Must be able to lift up to 100 pounds a minimum of one time a day
  • Ability to travel and transfer to a new headquarter upon request at anytime; throughout the entire PG&E service territory with no guarantees as to how long you will be away from home
  • Testing Requirements: Candidates must qualify on the Physical Test Battery (PTB), Journeyman Welder Knowledge Assessment (JWKA), and Math (Fitting) Assessment. Candidates who pass the PTB and JWKA are eligible to be invited to the Welder Weekend. Candidates will be required to perform the following tasks
  • Task A (2 hours) Welding Skills Assessment (12” .375 w.t. pipe)
  • Task B (45 minutes) 12” Beveled Hand Cutting Assessment
  • Task C (60 minutes) 24” Mechanical Cutting Assessment
  • Task D (2 hours) Welding Skills Assessment (24” .375 w.t. pipe)
  • Experience in laying out, cutting and fitting piping offsets in various diameters from ½” through 42” pipeline
  • 5 years of experience in pipeline welding construction
  • Completed the federally approved California State Certified Apprenticeship or possess equivalent skills and knowledge
  • Previously qualified with American Petroleum Institute Standard 1104 Certification
  • Experience working at PG&E, or previous Hiring Hall experience, in a Journeyman Welder Capacity
  • Install, repair, maintain, weld, fabricate and upgrade gas transmission and pipeline and distribution piping
  • Perform welding using various weld processes
  • Perform welding in construction and maintenance of pipeline facilities using various hand tools such as but not limited to tape measures, protractors, levels, framing squares, straight edges, and power cleaning tools
  • Must lead and provide a productive team environment
  • Must work safely at all times as defined by PG&E’s safety standards and procedures
  • Must be able to read and comply with all required company standards and work procedures
  • External and Hiring Hall Candidates: Must pass American Petroleum Institute Standard 1104 Certification Test
29

Welder Resume Examples & Samples

  • Maintain a safe, clean and orderly work environment by following all safety protocols and performing routine housekeeping and workplace organization
  • Perform activities of position as outlined in Production Work Instructions and Welding Process Specifications
  • Setup manual welding, automated welding and flame/plasma cutting equipment by setting parameters and making adjustments
  • Utilize manual welding and automated welding equipment and tooling to tack weld and finish weld components via GMAW, FCAW, SMAW and SAW processes
  • Prepare welding joints and repair surface/weld imperfections using flame/plasma cutting equipment and grinding
  • Perform product quality inspections and make corrections as required
  • Replenish welding equipment consumables (wire, tips, nozzles, feed rollers)
  • High school diploma/GED and a minimum of 3 years welding experience in a heavy fabrication industry
  • Prefer a certificate in welding from an accredited technical school
  • Must be able to read and interpret production drawings and technical work instructions
  • Able to speak, read and understand English
  • Must pass pre-employment welding skills assessment
30

Welder Resume Examples & Samples

  • Responsible for layout work preparatory to welding
  • Set-up and adjust semi-automatic welding equipment
  • Weld to exact ASME specifications non-code tanks and pressure vessels, gearboxes, interconnecting air pipe to gearbox assemblies
  • Set-up and weld non-complex materials or parts
  • Weld to exact specifications, impeller wheels, intercooler shells, tank assemblies and gearboxes
  • Weld complex tools, jigs and fixtures to close tolerances
  • Burn and cut various materials to specifications
  • Responsible for observing safety precautions at all times and maintaining a clean work area
  • Performs related miscellaneous work as required
  • 5 years minimum of ASME pressure vessel welding experience
  • Ability to utilize the following welding processes fluently: GMAW-STT, GMAW-P, GMAW-Spray, GTAW, FCAW and SMAW) in conjunction with mild steels and austenitic stainless steels
  • Must be able to weld open root pipes in and out of position
  • Ability to complete X-ray quality work per ASME B31.3 is required
  • Ability to read radiographic reports and images
  • Experience using rotating positioner is required
  • Must be able to safely operate oxy-fuel cutting and heating equipment
  • Must be able to use a hand held Plasma cutter
  • Must be able to complete carbon air arc gouging
  • Must know proper purging techniques for stainless steels
  • Knowledge of orbital welding is preferred
  • Visual weld inspection skills are preferred
  • Must be able to read blue prints, BOMS, weld maps, procedures and other documentation
  • Candidate is required to pass all of Ingersoll Rand’s welder performance qualification testing prior to job acceptance
  • High school diploma required
31

Welder Resume Examples & Samples

  • Working knowledge of welding various diameter and wall thickness steel pipes and plates, using stick electrodes
  • Using Automatic Welding System when required, and qualified to do so
  • Following project and operational QA/QC requirements and parameters during different types of welding methods
  • Ensuring working tools are maintained in a safe working condition
  • Ensuring fire risk material, or material that could be damaged by sparks, slag, etc are cleared from the work site and protected
  • Responsible for refusing unsafe work and for carrying out all work in accordance with the established HSES Safety Standards and Work Practices
32

Welder Resume Examples & Samples

  • Must know color code of material used
  • Must complete proper paperwork, as required
  • Able to minimize distortion via welder training
  • Performs housekeeping and other related duties as may be assigned by the Supervisor
33

Welder Resume Examples & Samples

  • Maintain welding supply inventory
  • Document work performed on machinery
  • Weld metal parts together using both gas welding or brazing and any combination of arc welding processes
  • Perform related tasks such as thermal cutting and grinding
  • Repairs broken or cracked parts, fill holes, and increases size of metal parts
  • Have knowledge of and understand Nabors Health, Safety and Environmental (HSE) policy
  • Have knowledge of possible health, safety and environmental impact of state and federal regulatory compliance requirements associated with oil and gas drilling operations
  • Have knowledge of Environmental Management System (EMS) operation, key personnel and their functions, and responsibilities
  • Correct use of required activity permits and MSDS sheets
  • Implementing Nabors safety and Hazard recognition programs each shift
  • Ability to read and comprehend instruction, correspondence and memos
  • Ability to write correspondence and effectively present information in one-on-one and small group situations
  • Ability to calculate figures and amounts such as percentages, area, circumference and volume
  • Ability to apply concepts of basic mathematics
  • Specific certifications, licenses and other registrations that may be required depending upon the nature of the work to be accomplished or by state, local or site specific entities
  • Oil field experience
  • Arctic experience
34

Welder Resume Examples & Samples

  • TIG welding experience required
  • Basic computer skills required (Microsoft Office)
  • Must be willing to work 3rd shift (10:00 p.m. to 6:00 a.m.)
35

Welder Resume Examples & Samples

  • Set up, understand and proficiently operate all welding equipment
  • Troubleshoot various and appropriate machine problems
  • ID and tag shop orders with product. Retrieve/enter data into system
  • Ensure quality and proper documentation on all parts
  • Maintain components and supplies as required to operate efficiently
  • Weld components based on print specifications
  • Perform 5S & Continuous Improvement activities
  • Welding certification
  • No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Sherman, TX will be considered
  • Spot welding, brake and machine operations experience
  • Computer skills to include bending program loading
  • Solid math skills; analytical and reasoning skills
  • Working knowledge of press operations and of progressive die functions
  • Ability to read, interpret and operate from prints and shop drawings
  • Ability to ID different gauges and types of raw materials
  • Able to read tape measures, scales, calipers, etc
  • Able to work and produce effectively with minimal supervision
  • Ability to communicate well with all levels of the organization
  • Ability to work as a team member
  • Able to stand on feet continuously during shift and able to lift 50 lbs without assistance
  • Requires PPE to include safety glasses, steel-toe shoes, leather gloves, and hearing protection (as required in high noise areas)
  • Environment exposure includes sharp objects, pinch points, oil, sparks
36

Welder Resume Examples & Samples

  • Prior experience welding Rocket engines and or propulsion systems
  • Prior experience using mixed torch gases (95Ar / 5H2, Argon Helium mixes)
  • Prior certification in In-Place-Tube, Automatic or Orbital Welding
  • Prior certification to D17.1 or Journeyman certification
37

Welder Resume Examples & Samples

  • Weld detail parts and assemblies by following manufacturing planning, blueprints, schematics, process specifications, engineering sketches, written and oral instructions
  • Plans sequence of welding operations, select appropriate size and type of welding rods, and selects welding equipment
  • Sets up equipment and materials: place materials into fixtures; adjust welding equipment; and cut, grind, or file parts
  • Welds precision or close tolerance parts and assemblies; light gauge parts, assemblies, and castings of .022 inches or less; hard alloys
  • Reworks and repairs parts and assemblies; cleans and polishes welded areas with wire brushes, grinders, and chisels, and performs other related duties
  • Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and non-conformances issues
  • Check units for compliance using hand held precision measuring equipment, such as calipers, micrometers, height gages and scales
  • Report all non-conformances to manufacturing supervision or corrective action representative
  • Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required
  • Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision
  • Reports job status and restraints to coworkers and supervision
  • Identifies production inefficiencies and suggests potential improvements to product or processes
  • Certified to American Welding Standard (AWS) D17.1 and MIL-STD-1595
  • Must be able to certify to .020” aluminum in 3F, 3G, and 2G
  • Must be able to certify to .016” on hard alloys in 3F, 3G, and 2G
  • Ability to weld stainless steel, nickel base, titanium, aluminum, and alloy steel in aerospace applications using gas tungsten arc welding (GTAW)
  • Knowledgeable and skilled in welding and assembly methods and common shop practices
  • Knowledge of the composition, structure, and properties of materials being welded
  • This includes their interactions, danger signs, and production techniques
  • Knowledgeable and able to interpret blueprints, engineering sketches, welding symbols and written and verbal instructions
  • Knowledgeable and able to apply shop math
  • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks
  • Able to complete and maintain all required training and certifications needed to do your job efficiently
  • Knowledgeable and able to use computer systems for office and shop applications
38

Welder Resume Examples & Samples

  • Minimum Acceptable Experience Level: Five years of metal fabrication and welding experience. Experience in reading and interpreting architectural and engineering (A&E) design drawings is required
  • Knowledge, Skills, and Abilities: :Knowledge of applicable US Codes and acceptable trade practices. Knowledge and experience regarding occupational hazards of the welding trade, related safety precautions and the considerable skill required for welding and the use of welding equipment
  • Education: A high school diploma or GED is required. A certification by the American Welding Society (AWS), or American Society of Mechanical Engineers (ASME) is strongly preferred
  • Security Vetting: Already possess a Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT or other required security certification prior to being hired is required for this position. Must maintain eligibility at the required security level for the duration of the contract
  • Language Skills: Strong professional English communication skills
  • Previous welding experience in an OCONUS environment with a multi-national workforce is desirable
  • Knowledge and experience regarding occupational hazards of the welding trade, related safety precautions and the considerable skill required for welding and the use of welding equipment
  • Knowledge in the discipline of operations and maintenance (O&M) projects in a desert environment preferred
  • Relevant overseas welding experience
  • Experience working with SOW, shop drawings and blueprints
  • Knowledge of ALL principles and processes involved in operating and supporting Welding/Fabrication functions at an overseas facility
  • Above average computer skills, specifically in Microsoft Word and Excel
  • Ability to become an active and functioning member of a team
39

Welder Resume Examples & Samples

  • Assembles component parts to front plates checking part numbers and locations against blueprints. Splices multiple pieces of material to make up front plate and other tank components
  • Splices corrugate when necessary providing leak proof seams
  • Operates jib and bridge crane, manual and electric lift trucks to move and position heavy parts and assemblies
40

Welder Resume Examples & Samples

  • ASME Recognized Welding Certification (or similar) or 4+ years welding experience
  • 3+ years experience in a manufacturing or military environment with demonstrated ability to work and excel in a team environment
  • Demonstrated written and oral communication skills. Experience using Microsoft office applications, including: MS Excel, Outlook, Word, and PowerPoint
  • Demonstrated ability to work with limited guidance
41

Welder Resume Examples & Samples

  • Meet all essential functions and qualifications for welder II
  • Perform in- and out-of-position welding
  • Perform hand fabricating
  • Participate in weld lab classroom training for IR/Trane and ASME/PED certifications as needed
  • Work involves considerable stooping, bending, and working on overhead assemblies and on man lifts/platforms/risers/ladders
  • Will be required to lift up to 40 pounds
  • Receive work instructions from a member of management or a team lead
  • Must be able to follow standard work and to complete production and maintenance records and other documentation related to operations
  • Must participate in basic problem solving, 5-S, and lean activities
  • Must demonstrate the ability to perform the above duties with no additional training required
  • Meet and maintain all safety requirements
  • Completion of formal welding program or equivalent on-the-job experience
  • Weld process: 3FU, 3GU, 4F, 4G, 1F, 2F, 1G, 2G
42

Welder Resume Examples & Samples

  • Familiar with a variety of welder concepts, practices, and procedures
  • Ability to understand welding symbols and diagrams, read blueprints, and/or other printed instructional material in the welding of products or parts
  • Must be thoroughly familiar with welding equipment such as torches, torch tips, filler rods, flux, hoses, valves, and gas cylinders
  • Rely on experience and judgment to plan and accomplish goals
  • Demonstrate willingness to work with others in a team environment
  • Positive, willingness to learn and participate in a changing environment to reach a common goal; not to exceed one written warning
  • Pass audits as required with regards to manufacturing procedures
43

Welder Resume Examples & Samples

  • Layout, cut, fit, and prepare material for welding
  • Welding as directed toward the successful installation, maintenance, troubleshooting, and repair of rolling equipment, conveyance systems, barges, and other related equipment
  • Work from blueprints, sketches, or verbal instructions
  • Responsible for general upkeep and maintenance of all facilities and equipment as needed
  • Perform all work in compliance with company standards, procedures, and regulatory requirements
  • Attend daily/weekly safety meetings
  • Administer general preventative maintenance activities, repairs, and housekeeping tasks
  • Perform other duties as necessary, directed and instructed by supervision
  • Required to demonstrate satisfactory welding techniques
  • Knowledge of basic properties of metals
  • Knowledge and experience in safe handling practices of flammable gases, liquids, and high pressure systems
  • Ability to accept supervision/direction and work effectively and cooperatively with other people
  • Must possess basic math skills in regards to addition, subtraction, multiplication, and division
  • Ability to deal with evolving operating conditions with few concrete variables in standardized situations
  • Ability to focus attention and follow work rules
  • Demonstrate aptitude to execute and maintain necessary records
  • Successful completion of background check and post-offer and random drug screens
  • Previous welding experience
44

Welder Resume Examples & Samples

  • Must demonstrate the ability to perform manual TIG and MIG aluminum welder and with a minimum 2 years of experience in welding or equivalent through technical trade school
  • Be able to perform repetitive tasks in accordance with an established, proven process and to perform in-process inspection in accordance with company standards
  • Operator must be capable of expressing effective communication skills
  • Be able to adapt to changing product requirements
  • Positive, proactive attitude and work approach
  • Demonstrate effective time management skills
  • Actively pursue timely problem resolution
  • Cross-training for additional job responsibilities may be available
  • Some overtime may be required to meet customer schedule commitments
  • Able to work in shop with world-class safety expectations and standards
  • Provide evidence of the ability to read and interpret engineering drawings, basic knowledge of GD&T and welding symbols
  • 5 - 10 years of welding experience with various alloys is desirable
  • A current DoD Secret Clearance would be a positive
45

Welder Resume Examples & Samples

  • Knowledge of production planning, scheduling, and layout
  • Knowledge and skill in Metal Inert Gas (MIG) and stick welding, brazing, and soldering
  • Knowledge of aluminum and stainless steel Gas Tungsten Arc Welding (GTAW), also referred to as Tungsten Inert Gas (TIG) welding
  • Proficient in Gas Metal Arc Welding (GMAW) and Shielded Metal Arc Welding (SMAW) structural steel and aluminum welding
  • Minimum three (3) years of experience in Journeyman Metal Trades
  • Current Welding Certification
  • Certification in GMAW and/or SMAW and /or GTAW
  • Additional experience/education requirements may vary by assignment
46

Welder Resume Examples & Samples

  • Welds production and less difficult prototype instrumentation piece parts in various materials including stainless steel, precious and semi-precious metals using various types of welding processes which may include TIG and/or MIG
  • May operate program welding machine to weld production units and also assist machine welding operator in program welding higher volume production units when work load requires it
  • Welds must pass destructive and non-destructive testing based on certification requirements per individual product
  • Must maintain individual welding qualification and certification per product requirements
  • Sets up fixtures and lays out work for production and prototype piece parts
47

Welder Resume Examples & Samples

  • Makes quality U.T. welds
  • Safely operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, tube bending machine, and various pneumatic hand tools
  • Must have knowledge of required tools and maintenance care
48

Welder Resume Examples & Samples

  • Ability to plan, layout and perform diversified fabrication work
  • Determine proper machine settings, gas and filler selections for particular base metal and process applications
  • Operates ring roller and associated equipment as required
  • Works from specifications, drawings, prints and welding symbols
  • Performs other duties as designated by supervisor
49

Welder Resume Examples & Samples

  • Set up and operate equipment
  • Set feeds and speeds for turntable
  • Clean and prep parts
  • Weld components complete
  • Assure part quality and conformance
  • Perform preventive maintenance on machines
  • Fabricate simple parts when needed
  • Select proper filling rod
  • High School Diploma or GED, or ability to obtain either within one year of employment
  • Minimum 6 months of experience reading basic shop drawings
  • Minimum 6 months of Mig welding experience
  • Minimum 6 months experience using basic hand tools
  • Basic tig
  • Oxy., act. Gas
  • Shearing, Rolling
  • Turntable
  • Stud welding
50

Welder Resume Examples & Samples

  • Positions parts in jigs or fixtures on bench or floor, or clamps parts together along layout marks
  • Selects torch, torch tip, filler rod and gas, according to the appropriate Weld Procedure Specification (WPS)
  • Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding torch
  • Is proficient in using wire feed MIG welder and adjusting parameters on welders to achieve a weld that meets the size and strength requirements called out on the blueprint and according to the Weld Procedure Specification (WPS)
  • Preheats workpiece with a torch or other means, as called out on the WPS
  • Lays out, positions, and tack welds workpieces and welds along horizontal or vertical weld lines
  • Pass WPS certifications for MIG welding steel
  • Responsible for ensuring that every effort is taken to maintain a safe and healthy work environment by following the rules, safe work practices and procedures set by the company and by reporting any hazard, accident, injury or near-miss immediately to their supervisor or Lead
  • Take every reasonable precaution under the circumstances to prevent an accident or injury form occurring. Safety is the first priority all everyone. If uncertain about the safety of any task or job assignment, consult with the immediate supervisor
  • Employee Safety Team Members: conduct daily area inspections in an effort to identify to identify hazards and implement corrective actions. Communication employee concerns to leadership. Serve as Safety Champions and lead by example
  • Possess a one (1) year Welding certificate from a college or technical school
  • Minimum one (1) year of Welding experience
  • Fluent in English, both written and verbal
  • Minimum three (3) years of Welding experience
51

Welder Resume Examples & Samples

  • Examines shop order to ascertain part, material, operation and quantities
  • Checks parts against print and shop orders for dimensions and weld size to be applied
  • Selects and adjusts current, polarity, voltage, filler material, shielding gas, etc., in accordance with welding procedure specified
  • Interprets welding symbols, sets up, tacks and welds parts together according to procedure specified
  • Ensures parts are free from paint, varnish, scale rust, etc., in area to be welded. Grinds and cleans parts as necessary
  • Uses oxyacetylene/MAPP torch to preheat and maintain preheat as required by welding procedure specified
  • Measures inter-pass temperature when required by the weld procedure specification using a pyrometer
  • Positions parts to be welded using the table or welding positioner
  • Responsible for personal safety and those around him/her. Can maintain excellent housekeeping standards
  • Participates in field work when required, which requires overnight stays from time to time
  • Participation and involvement in Safety, Quality, and Activities Committees
  • Ability to operate heat treating ovens for stress relieving of metals per specification
  • Experience with tools, equipment, and processes including
  • Various electrical welding processes including satellite hard facing
  • Oxyacetylene torch
  • Material handling equipment, i.e.., overhead cranes, tow-motor, pallet jacks
  • Heat treating ovens
  • Electrical grinders
  • Welding positioner
  • Hot rod boxes
52

Welder Resume Examples & Samples

  • Perform repairs on ferrous and non-ferrous metal associated with vehicles and equipment
  • Construct metal working projects according to specifications and drawings as supplied by the customer
  • Layout, design and build metal working projects as directed by supervisors
  • Operate metal working machines to include but not limited to metal cutting machines, press brakes, drill press, and trade associated hand tools
  • Prepares and inspects vehicles and equipment for shipment by air/sea/surface transportation
  • Comply with US Air Force/DynCorp safety and quality standards
  • Handle the storage, use and disposal of Hazardous Materials within the assigned work center in compliance with directives and regulations
  • Operate material handling equipment as required
  • Ensures all tools, personal protective equipment (PPE) and clothing issued remain safe, secure and serviceable, reporting any deficiencies to your immediate supervisor
  • Perform TDY in the Area of Operations as required by the US Air Force/DynCorp tasking
  • Must comply with Military Document Ground Combat Vehicle Welding Code-Steel Drawing # 12479550, and American Welding Society (AWS) D1.1
  • Performs other duties as assigned by the MRAP Vehicle Maintenance Superintendent
  • Be able to understand and operate plasma, and acetylene cutting equipment
  • Understand technical data, plans/blueprints and publications pertaining to but not limited to US Air Force vehicles, and equipment
  • Must have, or be able to obtain confined space permit
  • Verifiable five years experience as a certified welder, with experience in MIG (metal inert gas), TIG (tungsten inert gas), ARC (electrical arc welding) and Gas welding operations
53

Welder Resume Examples & Samples

  • Perform and set up moderate to complex MIG/TIG and Heli-arc welding operations
  • Minimum 1 year of MIG welding experience OR graduate of a vocational program with a certificate in welding
  • No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area (50 mile radius) will be considered
  • Ability to Mig, Tig and Heli-arc Weld
  • Ability to read and follow standard work
  • Ability to use good judgment and problem solving skills to make informed decisions
  • Must be able to communicate effectively across all levels
54

Welder Resume Examples & Samples

  • Sets up and operates welding equipment used in work operations to produce high quality welds in both ferrous and non-ferrous materials
  • Monitors quality in accordance with quality specifications
  • Works with inspectors to locate defects in welds using X-ray, dye penetrate, and other nondestructive inspections; remove defects and repairs weld
  • Recommends proper tools and materials for work to be performed; monitors proper use of welding equipment and safety practices
  • Maintains required certifications
  • May aid in the training of less experienced welders
  • Performs housekeeping and cleanup duties as required
  • Typically requires a High school diploma or equivalent and two years or more related welding experience
  • Must have the required certifications and demonstrate a general understanding of welding concepts, and practices including moderately complex manufacturing documentation such as diagrams, drawings, specifications and work instructions and knowledge of TIG welding techniques
  • Must possess: (1) the ability to communicate and understand written and verbal communication; (2) the ability to identify, interpret and report on issues, contributing solutions to routine problems; (3) the ability to use independent judgment in performing welding functions; and, (4) good interpersonal communication skills to explain general information and effectively communicate with all levels of employees
  • Ability to work both independently and in a team environment is essential as is the ability to work extended hours as required
55

Welder Resume Examples & Samples

  • Must have 1-2 years of welding experience
  • Certify and maintain a welding certification in a minimum of two metal groups
  • Ability to manage multiple competing priorities simultaneously
56

Welder Resume Examples & Samples

  • Plan and lay out work from detailed assembly and installation blueprints and manufacturers’ specification sheets, using shop math and measuring instruments
  • Select the appropriate welding method, such as TIG, MIG or stick
  • Perform plumbing and pipe-fitting welds to close tolerances, install and test welds
  • Develop and reverse-design piping systems and fixtures for reassembly and welding as required
  • Personally verify the quality of finished work, demonstrating an in-depth understanding of specifications and workmanship
  • Meet production goals relating to efficiency, schedules, and scrap and rework
  • Apply experience and knowledge to troubleshoot and correct process and equipment problems
  • Collaborate with machinists and assemblers on the team to discuss and solve problems relating to repairs and equipment
  • Record accurate, timely data on computer-based systems or in manual logs
  • Apply an understanding of the process flow of documents, materials, and parts through the repair or manufacturing process
  • Maintain a safe workplace by wearing PPE, following procedures and rules, and completing training
  • Clean and maintain machines and tools, and keep an organized workspace
57

Welder Resume Examples & Samples

  • Must have a current and valid welder's license and certifications issued by any state, city, local government or facility approved by the American Welding Society (AWS)
  • Able to meet all health requirements as defined by Environmental, Safety, Health, and Medical (ESH&M) departments
  • Ability to obtain and maintain a DoD Secret security clearance is required
  • Ability to obtain and maintain a SAP/SAR level clearance as a condition of continued employment is needed
  • Must be licensed and carry one (or more) certification codes as defined below
  • FAA Airframe and Power Plant (A&P) certification nice to have
  • Current DoD Secret clearance is highly desirable
58

Welder Resume Examples & Samples

  • Set up resistance welder to include selecting correct tips, posts, arms, tooling, welder control settings, air pressure, etc. to perform operations
  • Work to drawing specifications
  • Wear all safety equipment and observe all hygiene requirements as specified and directed
  • Work with various groups of employees in team based environment
  • Cross-train in various areas of the Welding Department
  • Work overtime as necessary
  • Comply with all applicable ISO 9001 and ISO 14001 procedures. Possess a working knowledge of relevant ISO procedures and work instructions as well as Eaton’s MESH Program
  • Know and follow established job specific and site wide health and safety procedures and rules
  • Bring health and safety issues, unsafe acts and safety suggestions to management’s attention or correct those where possible
  • Keep other employees informed of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety whenever possible
  • Maintain health and safety equipment in good working order
  • High School Diploma or equivalent from an accredited institution
  • No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the Cleveland, TN facility in order to be considered
  • Previous welding experience in a manufacturing environment
  • Must be able to individually lift 40 lbs. continuously throughout the shift
59

Welder Resume Examples & Samples

  • Must possess expert knowledge in multiple types of welding to include 2 or more of the following, torch, MIG, TIG, and stick
  • Must be able to dismantle structures using torch and plasma cutting equipment for future reassembly and or disposal
  • Experience in reading and interpreting architectural and engineering (A&E) design drawings is required
  • Knowledge of applicable US Codes and acceptable trade practices
  • Expert computer skills, specifically in Microsoft Word and Excel
  • MON_GLSO
60

Welder Resume Examples & Samples

  • Read and understand mechanical drawings, blueprints, tolerances and customer specifications
  • Identify and locate appropriate steel parts throughout the factory to create weldments
  • Measure, position and weld parts using mechanical blueprints
  • Grind and smooth welds and prepares steel prior to painting process to remove imperfections
  • Use of mathematics, geometry, measurements and understanding the correct orientation of parts in order to properly assemble projects
  • Works safely and maintains a safe work environment free from hazards
  • Must be willing to work overtime as necessary, including weekends
  • Ability to work independently and take direction from supervisor or lead person
  • Must be able to stand or walk for 8 hours/day, as well as overtime as required
  • This position requires moving moderate weight (up to 50 pounds) by bending, stopping or reaching on a daily basis
  • High School Diploma or G.E.D. Equivalent is required
  • No relocation benefit is offered for this position. Only candidates residing within the immediate geographical area within 50 miles of Omaha, NE will be considered for this position
  • One year certificate from a college or technical school in Mig Welding OR 12 months of mid welding experience
  • Mig Welding Experience that includes fitting of parts and close tolerances
  • Blueprint reading or drafting education or experience
  • Experience Welding in a manufacturing environment
  • Experience in layout of parts prior to welding
  • Able to read a tape measure to the 1/32”
61

Welder Resume Examples & Samples

  • Operate ring roller and associated equipment as required
  • Work from specifications, drawings, prints and welding symbols
  • Perform other duties as designated by supervisor
62

Welder Resume Examples & Samples

  • Uses hand tools, cutting tools and power tools
  • Performs arc welding
  • Installs and inspects Spider-Lift
  • Understanding of basic rigging
  • Uses SMAW or GTAW process to inspect subsequent weld passes
  • Repairs and replaces stainless steel piping, stainless steel valves and boiler tubes
  • Performs administrative functions in support of work unit such as timekeeping, materials support, cost monitoring, and scheduling and quality control/quality assurance
  • Uses plant computer systems to monitor work backlog and input work order data
  • Performs data collection and maintain proper logs
  • Adheres to all safety and environmental rules and regulations
  • Performs emergency response activities as required
  • Performs general housekeeping functions as necessary
  • Operates Company vehicles and equipment
  • Highschool Diploma or GED Equivalent
  • Achieve a successful score on the NRG pre-employment assessment
  • Demonstrate proficiency in SMAW/GTAW welding processes
  • Completion of a High School or Vocational School welding training program
  • Two to four years welding experience
  • Three to five years related experience in fossil fuel power plants, refineries, or other similar field
63

Welder Resume Examples & Samples

  • Operates welding equipment for heliarc, short arc, and TIG
  • Periodically operates cutting torch and horizontal band saw
  • Uses jigs and fixtures to weld frames out of carbon steel, stainless steel, and some exotic metals
  • Welds different metal components together to meet drawing requirements. Uses weld sequencing to ensure end product meets requirements
  • Studies blueprints, work orders, and manufacturing instructions to determine location and processes for welding metal
  • Inspects and qualifies the work shown on the print or drawing
  • Cleans up welds and preps components using pneumatic and electric grinders and enclosed sandblasting booth
64

Welder Resume Examples & Samples

  • Minimum of 2 years of welding experience ( OR an Associate's Degree / vo-tech Degree with focus on welding)
  • Ability to pass a re-certification test
  • Machining experience
  • Pipe & tubing welding experience
  • Experience with lean manufacturing
  • Able to demonstrate a successful TIG or MIG weld
65

Welder Resume Examples & Samples

  • Setup and operation of MIG and TIG welding equipment
  • Use hand and power tools to grind, bevel, and fit metals together
  • Adhere to safety and company policies and procedures
  • Welding and cutting may require vertical or horizontal working positions
  • Successfully pass in-house Welding Certification test based on AWS standards for GMAW and GTAW
  • Ability to perform multiple tasks at the same time
  • Ability to follow workplace safety standards
  • Excellent interpersonal skills under stressful situations
  • Ability to organize and prioritize
  • Must be able to successfully pass in-house Welding Certification test based on AWS standards for GMAW and GTAW.**
66

Welder Resume Examples & Samples

  • Perform the welding and assembly activities in comply with EHS, Quality & Integrity policies
  • Ability to understand / follow shop routing, Work instructions, drawings, engineering requirements & Welding procedures (WPS)
  • Ability to perform spot DPI / Visual check on repaired area
  • Capable to use measuring instruments
  • Capable to perform the required task efficiently with no or little supervision
  • Capable maintain / update job related documentation
  • Work closely with cell leader, Engineer to ensure efficient operation of equipment
  • High School Certificate or equivalent experience
  • Minimum 5 Year experience in gas turbine components repairs
  • Be a qualified welder per ASME IX or equivalent standard
  • Experience with gas turbine components repairs & assembly
  • Understands and usage of measuring instruments
  • Understands shop routings, work instruction, Repair Engineering instructions and Engineering drawings
  • Extensive knowledge of welding
  • Perform dye penetrant test and inspection
  • Self starter, able to work with limited or no supervision
  • Keen to learn
  • Have the ability to work flexible hours and day / night
  • Is willing to work weekends when needed
67

Welder Resume Examples & Samples

  • Assist in the completion of the OCCM Scope of Work (SOW) on several U.S. Army vessel
  • Apply appropriate welding processes to join, surface, fabricate, or repair parts of metal or other weld-able materials
  • Support on-island vessel dry dockings, overhauling and refurbishing watercraft electrical systems; supporting maintenance and repairs on other equipment, and systems assigned to Marine Services
  • Position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools
  • Lay-out and mark points on parts or sub-assemblies using rule, square, scribe or templates
  • Inspect completed work for conformance to specifications
68

Welder Resume Examples & Samples

  • Perform work from manufacturing information, bills of material, written and/or oral instructions
  • Utilize manufacturing information, determine necessary parts/inventory, jigs/fixtures, and obtain materials from stock areas
  • Provide assistance to other sheet metal fabricators / operators in performance of their duties as required
  • Deliver material to/from work stations using material handling equipment, position work material on work surface. Ensure correct parts and matching documentation reach next process in a timely fashion
  • Complete necessary preparation work such as wiping, degreasing, de-burring, or grinding of components
  • Pick up and place scrap in appropriate containers. Documentation/record keeping may be required
  • Operate spot welders, arc welders, plasma TIG welder, MIG welder, cutting torch, power grinder, power sanders, hand-tools, bandsaws, drills, temporary fixturing devices, jigs and fixtures, and other metal-fabrication equipment as directed. Inspect parts periodically or as directed utilizing manufacturing information such as drawings / blueprints, make necessary adjustments as required. Keep accurate piece count and other applicable records. Inform Supervisor of any quality problems
  • Maintenance of equipment such as dressing of welding electrodes, oiling/greasing, machine settings, changing of tooling, and minor adjustments may be necessary. Complete necessary maintenance check sheets and inform Supervisor and / or Maintenance personnel of any problems
  • Maintain equipment and work area in a clean and orderly fashion; keeping oil deposits off of floor
  • Observe all health/hygiene and safety policies as directed and specified
  • High School Diploma or GED from an accredited institution required
  • Welding Certification required
  • Relocation is not offered for this position. Only candidates residing within a 50 mile radius of Fayetteville, NC will be considered
  • Sufficient proficiency with precision-measuring equipment such as but not limited to calipers, tape measures, micrometers, etc. Hand tools will be utilized such as screwdrivers, hammers, wrenches, drills, grinders, portable bandsaws, files, power hand tools, drill presses, air-driven hand tools, etc
  • Demonstrated proficiency with drawings and/or blueprints
  • Demonstrated proficiency of welding techniques, shop blueprint/drawing comprehension, and shop math skills
  • Demonstrated proficiency with DMM
  • Familiar with metal grinding
69

Welder Resume Examples & Samples

  • Various types of welding and the most appropriate applications of each
  • Properties/uses of various metals and the welding techniques and procedures best suited to each
  • General safety equipment and practices associated with the welding trade
  • Purposes/uses of the various equipment structures fabricated, modified, and/or repaired
  • Materials, supplies, and tools needed to fabricate, modify, and/or repair various equipment structures
  • Diagnosis and repair procedures, equipment management principles and record keeping
  • Computer equipment; Fleet Management Systems and database management principles
  • Using various welding equipment, including oxyacetylene, electric arc, heliarc, and Metal Inert Gas (MIG) and Tungsten Inert Gas (TIG) welding process
  • Fabricating, modifying, and/or repairing various equipment/structures based on plans, blueprints, sketches, and/or verbal instructions
  • Using a variety of metal fabrication tools/equipment, including grinders, presses, brakes, and rollers
  • Estimating cost of repair maintenance work for a wide variety of automotive and heavy construction equipment
  • Estimating parts/material needs for various types of projects
  • Follow oral and written instructions
  • Interpret repair manuals, service bulletins and recall bulletins
  • Utilize a PC and PC programs
  • Manage time effectively
  • Lift up to 50 lbs. and push/pull 90 lbs
70

Welder Resume Examples & Samples

  • Communicate information to others about project status, updates, specific instructions etc and communicate with other departments as needed (e.g. engineering, material lab) to address problems and issues
  • Complete necessary paperwork and computer entries accurately and in a timely manner
  • Manufacture/inspect production parts using welding processes and procedures, and industry standard specifications
  • Strong assessment of weld parameter inputs and make adjustments during welding
  • Assists engineering and supports members in troubleshooting problems
  • The position also involves the ability to mentor and provide guidance and training to members, through instruction and personal example
  • Identify process and individual improvements
  • Perform basic troubleshooting and problem solving on equipment and processes with engineering design and withengineering approval
  • Performs Mechanical Assembler or other related duties as assigned
  • Strong communication skills in writing effectively, in reading and understanding work documents, and in communicating information clearly to coworkers and supervisor
  • Basic knowledge of and the ability to adhere to department safety rules regarding eye and ear protection, personal protection, hazard labeling, MSDS sheets, evacuation procedures, and emergency phone numbers
  • Strong ability to perform simple arithmetic computations including addition, subtraction, multiplication and division using whole numbers, fractions, decimals and percentages
  • Strong ability toprocess multiple types of information and/or perform multiple tasks simultaneously and the ability to follow work orders efficiently
71

Welder Resume Examples & Samples

  • Threads the proper electrode wire through portable welding gun
  • Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, occasionally specified by appropriate certified welding procedure(s)
  • Strikes (forms) arc which generates heat to melt and deposit metal from electrode to workpiece and join edges of workpiece
  • Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle
  • Welds in flat, horizontal, vertical, or overhead positions. Averge welding gauge is 18 gauge - .040
  • Cleans or degreases weld joint or workpiece
  • Repairs broken or cracked parts and fills holes
  • Prepares broken parts for welding by grooving or scarfing surfaces
  • Positions and clamps workpieces together or assembles them in jig or fixture
  • Tacks assemblies together
72

Welder Resume Examples & Samples

  • Knowledge of metallurgy and sheet metal fabrication techniques
  • Have strong problem solving, blueprint reading and communication skills and possess the ability to work independently as well as with others
  • 3-5 years experience working in an aviation support industry an asset but not required
  • Manage own projects effectively while showing initiative, ability to focus and prioritize, seeking assistance as required
73

Welder Resume Examples & Samples

  • Experience: Two years or relevant work experience
  • Basic skills in welding techniques
  • Required to exert physical effort in handling objects less than _ pounds occasionally
74

Welder Resume Examples & Samples

  • Perform visual and in-process inspections in accordance with API and ISO quality specifications
  • Learns skills to pass periodic welding tests and qualifications in compliance with qualification procedures
  • 8 years of experience in performing welding processes
  • 1 to 3 years’ previous experience in related oilfield position
  • 2 years of experience in operating automated or semi-automated welding equipment / processes
75

Welder Resume Examples & Samples

  • Installs new steel gas mains and services using tools such as a welding machine, cutting torches
  • Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, soldering
  • Inspect, examine, and test installed systems and pipe lines, using pressure gauge, observation, or other methods
  • Performs welding, brazing and metal cutting tasks on pipeline, pipeline fittings, welds machinery and equipment
  • Install, repair, maintain, weld, fabricate and upgrade gas distribution piping
  • Measure and mark pipes for cutting and threading
  • Layout of pipe, supports, and related equipment, following blueprints
  • Reads, studies and interprets layout, blueprints, job specifications and welding procedures to determine work requirements
  • Prepare reports and conduct inspections as required
  • Comply with MasTec safety standards and procedures
  • Performs various fitting, welding, finishing, grinding and related operations to assemble and fabricate various structural units
  • 5 years or more years of experience gas distribution welding
  • Experience in laying out, cutting and fitting piping offsets in various diameters from ½”through 36” pipeline
  • Must be familiar with various types of machinery
76

Welder Resume Examples & Samples

  • Must meet department quality, attendance, and productivity requirements
  • Working from blueprints, sets up and welds parts as called for by shop orders
  • Operates hand grinders as needed
  • Assembles welding equipment as needed
  • Works with less experienced welders in a training capacity
  • Performs other duties within the scope of the job assignment as directed by the Supervisor
  • Must be able to communicate effectively and work in a cooperative manner to support a team environment
  • Must be able to read and follow welding blueprints
  • Must have knowledge of metal properties
  • Previous welding experience or formal training is required
  • Must meet department quality, attendance and productivity requirements
  • Must perform duties in compliance with all safety rules and regulations required by Company, federal, state and local provisions
  • Must be able to read blueprints
  • Must have mechanical dexterity
77

Welder Resume Examples & Samples

  • Self-inspect work performed to ensure that work meets the Quality requirements and specifications
  • Typical tools include but are not limited to crescent wrench and wire cutters
  • May work from Engineering drawings, sketches, shop orders and written and verbal instructions
78

Welder Resume Examples & Samples

  • Uses MIG welder to assemble fabricated metal products in an efficient manner to maximize production
  • Operates the equipment in a safe manner and reports hazards associated with the equipment or its operators to the Group Leader
  • Produces strong penetrated welds that are smooth, non-porous, and consistent
  • Follows required procedures and uses appropriate jigs and fixtures to assist in the assembly and welding processes
  • Maintains/produces a level of output that will minimize production delays
  • Communicates effectively with other workers to direct personal workflow
  • Assist other individuals in area when needed
  • Assisting and participating in the implementing all aspects of lean manufacturing
79

Welder Resume Examples & Samples

  • Under limited supervision, performs welding applications within one or more work teams
  • Ensure HS&E policies and procedures and Quality System Procedures are followed at all times
  • An experienced Welder with knowledge of Mig and Stick welding
  • Experience of reading blueprints and using hand-held tools
  • Experience of working within a workshop environment
  • Functional testing skills
  • Ability to read engineering/component drawings in English
  • Ability to work in a team and use own initiative
  • Ability to work safely and to ensure the safety of others
80

Welder Resume Examples & Samples

  • Receives instructions, prints and work orders for job
  • Interprets drawings and sketches, plans details of working procedure and tools and materials requirements
  • Selects materials in accordance with suitability for job
  • Lays out work, makes sketches and determines stock sizes as required
  • Sets up, assembles and constructs special fixtures as needed
  • Performs gas and electric welding in all positions (down-hand vertical, overhand, etc.)
  • Makes any type and size weld, such as “V” lap, butt, etc., preheating parts when required
  • Makes provisions for handling materials and equipment to and from job site as required in connection with work
  • Works in shop, field or underground as required
  • Performs work requiring knowledge of the welding properties of various types of metals, welding rods, welding heats, stress relief, allowances for fit-up and machining, and the effect of shrinkage, warpage and expansion
  • Cleans and maintains working area in an orderly condition
  • Ability to communicate at all levels of the operations
81

Welder Resume Examples & Samples

  • Obtain necessary materials need for the completion of each assigned weld
  • Grasp, Grip, and manipulate hand tools to complete each individual weld on a variety of truck parts
  • Read and follow tank schematic
  • Grasp, manipulate and hold the steel components and the parts to be welded
  • Assembly of parts
  • Operate overhead crane system
  • Weld parts onto partially assembled truck components
  • Lifting of truck parts to hold while co-worker utilizes tools to secure to sub-frame
  • Prolonged postures (bending, stooping, kneeling, standing, walking, and squatting) while performing all job tasks
  • Operate welding equipment while standing on scaffolding 20 feet above the floor
  • When complete, welded all major components for the truck
82

Welder Resume Examples & Samples

  • Prior to each job, accurately count all pieces to ensure no extra/missing parts
  • Set-up jobs; load and unload jigs
  • Operate welding equipment according to job guidelines and verify work to print(s)
  • Perform all aspects of job in a safe and quality conscious manner
  • Verify work of other welders in work cell to prints
  • Report supply needs, equipment breakdowns, shortages and poor quality materials/products to supervisor or lead
  • Complete required paperwork in a correct and timely manner
  • Operate hoist and manual pallet jack
  • Provide training for new welders to learn jobs in weld cell
83

Welder Resume Examples & Samples

  • SKILL/CHARACTERISTICS
  • REMARKS
  • LIST ALL MACHINES, TOOLS, SOFTWARE, ETC. USED IN THIS POSITION
84

Welder Resume Examples & Samples

  • Assemble and MIG weld components to muffler, inlet and outlets
  • Operate automatic weld machine
  • Load/Unload assembly parts and/or materials from racks and containers
  • Attach identifying tags and labels on racks, pallets and/or other containers
  • Actively participate in team meetings associated with quality, safety and production
  • Perform computerized production, shipping and receiving responsibilities
  • Perform minor maintenance operations on machinery
  • Perform quality tasks that correlate with the TA World Wide Quality Policy, Q1 and QS/TS certifications
  • Ensure environmental tasks correlating with the TA Environmental Policy are performed within the specifications of EMS
85

Welder Resume Examples & Samples

  • Fit-up, tack weld, and finish weld on sub-assembled components and main frames of construction equipment using (GMAW) "mig" welding process. Uses related fabrication equipment and tools as needed
  • Welding degree from technical college or 1+ years experience in welding required
  • Candidate must be able to fit up, tack weld, and finish weld on sub-components and main frames of construction equipment using (GMAW) "mig" welding process
  • Candidate must possess good safety and attendance record
  • Candidate must be available to work any shift
  • Must pass AWS D14.3 qualifications
  • Must project a cooperative and positive attitude toward customers, employees and the Company
  • Incumbent may be required to work overtime as required to meet schedules
  • Some standing, kneeling, stooping, reaching, pushing and pulling. Must be able to lift a maximum of 50 pounds
  • Must comply with all environmental, quality and safety rules, practices and standards
86

Welder Resume Examples & Samples

  • Promotes Safety as Job #1 at all times, follows all safety rules, identifies and reports safety concerns. Attend all monthly safety meetings and insure that employees in your department works safely and wearing their proper PPE
  • Adheres to all Company procedures, rules and policies and helps implement them within the team while fostering a team-concept
  • Supports Company goals concerning production, cycle time, safety, and quality
  • Cleans and prepares surfaces to be welded. Sets up, assembles, and tack welds parts
  • Change out Flask to be worked on
  • Deburs, slags, and cleans work as required
  • Must be willing and able to cross-train and work in other departments or shifts as the need arises
  • Keeps equipment and work areas clean and orderly
  • Helps maintain tools and equipment
  • Must have good work ethic
  • Operates cranes and forklifts
  • Hold daily tool box meetings giving the team direction for the daily work load
  • Fab plate cut out and prep flask
  • Clean up the last 30 minutes at the end of the shift; make certain all tools have been put away and locked up at the end of each day
  • Change oxygen bottles
  • Oversee Welders / Laborers in the Welding Department / report any issues to supervisor by the end of the work shift
  • Insure all daily production sheets are completed correctly (Flask and Materials)
  • Check oil in the welders at the start of the shift
  • Keep up with all supplies that have been issued to you; inventory supplies each Monday and report what is needed
  • Make certain break / lunch times are observed your employees
  • Properly train employees with signed / written documentation and report progress in writing weekly
  • Weld inside plant if deemed by management
  • Responsible to meet expected production
  • Welding experience or job-related experience. Knowledgeable of AWS codes a plus. Must be proficient with Oxy/Acetylene torch
87

Welder Resume Examples & Samples

  • Weld automotive lifts and components for automotive lifts
  • Assist in implementation of 5S initiatives and activities
  • Suggests and assists in process improvements which assures quality and effeciency is built into the process
  • Assist in welding processes as needed
  • Excellent communication skills. Must be able to communicate at all levels of the organization
  • Strong understanding of process interaction
  • Understanding of welding and general manufacturing
  • Must be able to stand for up to 10 hours a day
  • Must be able to periodically lift up to 65 pds
88

Welder Resume Examples & Samples

  • May lay out and mark weld points on parts or sub-assemblies
  • Minimum of 2 year of experience in welding carbon steel in an industrial / production environment
  • Minimum of 1 year or experience in Mig, Flux Core, Stick, or Carbon Arcing weld processes
  • Minimum of 6 months experience welding flat, horizontal or groove welds
89

Welder Resume Examples & Samples

  • Inspects completed work for conformance to specifications and performs minor maintenance to equipment
  • Ability to weld out of position (horizontal, vertical & overhead)
  • Night Shift
  • 1 – 2 year(s) of related experience
90

Welder Resume Examples & Samples

  • Materials welded may include steel, stainless, aluminum or various alloys
  • Methods may include gas welding, shielded material arc, gas-tungsten arc, gas-metal arc or submerged arc
  • All-position welding may be required
  • Variety of applications required an ability to plan, layout and perform diversified work, which may be characterized a short fun production or job shop custom work)
  • Includes high pressure and code welding and other work involving critical safety and load requirements or welding where appearance is critical
  • Regulates heat and feed and may select electrodes, tips and rods
  • Works from more complex specifications, drawings, prints and welding symbols
  • May provide technical direction to others
  • Maintains safe operations by adhering to safety procedures and regulations
  • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs
  • Documents actions by completing production and quality logs
  • Updates job knowledge by participating in educational opportunities; reading technical publications
  • Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments
  • Ability to follow instructions, and management directive
  • Ensure a safe working environment, good housekeeping and 5’s for your respective area and all of VBI
91

Welder Resume Examples & Samples

  • Engage in Shop, site, and personal safety
  • Adhere to high quality standards
  • Understanding and ability to identify weld defects
  • Weld both Mig Hard Wire and Flux Core in all positions
  • Understand Basic Weld symbols
  • Work with Oxygen/Acetylene torches
  • Operate both handheld and pedestal grinders and drill presses
  • Understand/work with Air arc techniques
  • Assemble and layout parts
  • Operate overhead crane
92

Welder Resume Examples & Samples

  • Read blueprints and drawings using GD&T and take or read measurements to plan layout and procedures
  • Determine appropriate welding equipment or method based on drawing or material requirements
  • Operate angle grinders to prepare and finish dress parts that must be welded
  • Set up components for welding according to specifications with proper fit-up
  • Align components using calipers, rulers and clamp pieces
  • Repair fixtures, components or equipment by welding pieces and filling gaps
  • Maintain equipment in a condition that assures safety
93

Welder Resume Examples & Samples

  • 3 – 5 years’ experience in a production weld shop
  • Knowledge of both M.I.G. & T.I.G (College and or Trade School training a plus)
  • Experience in Mild Steel, Stainless Steel and Aluminum and thicknesses from .062” thru .500”
  • Ability to read and understand AWS welding symbols
  • Must be or become AWS certified within three months from date of hire in applicable fields
  • Someone who pays close attention to details and has experience working to tight tolerances, +-.015
  • Familiar with all related hand tools
  • Knowledge of and ability to read tape measures, Dial and Vernier Calipers, Squares etc. to perform in process inspections
  • Experience fabricating welding fixtures to assist with the fabrication of parts
  • Ability and willingness to work overtime as needed in order to help production team meet customer demand
  • Good solid math skills with ability to read, add and subtract decimals
94

Welder Resume Examples & Samples

  • Inspecting own work to ensure compliance to drawings and weld procedures and making repairs if needed
  • Assisting with incoming parts inspection, final product inspection and completing appropriate documentation
  • Back-gouging using carbon-air-arc or plasma for full penetration welds
  • Cleaning and polish welds to company design specifications
  • Working from drawings/sketches to determine weld size, weld location and weld process
  • Completing ASME code weld log documentation daily
  • High school diploma or Trade School certification
  • 2 years of experience welding on pressure vessels and FCAW welding process
  • CCC procedures certification
  • Ability to weld stainless steel using primarily GTAW and GMAW process to a high degree of quality
  • Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while employed
  • Schedule flexibility to work in rotating shifts
  • Ability to pass an AWS vertical plate weld testing using FCAW process and proven experience
  • Prior experience with stainless steel, alloy welding, or any weld certification, preferred
  • 1-2 years of experience with submerged arc welding, a plus
  • Successful candidates must have the ability to work rotating shifts from 6:00 am to 2:30 pm and 2:30 pm to 11:00 pm, and be able to conform to a strongly enforced safety program, have excellent attendance, health, dependable transportation, and be drug free
  • All safety equipment shall be provided as well as shop uniforms after 30 days of successful employment. Starting salary is $21.00/hrly minimum. Medical, Vision, dental insurance, 12 paid holidays, 1 week vacation and retirement savings program upon employment
95

Welder Resume Examples & Samples

  • Regular and prompt attendance and the ability to work schedule as define and overtime as required
  • Receive instructions, prints and work orders for each job. Plan details of working procedure, tools and material requirements
  • Perform basic welds involving varying degrees of precision and control
  • Perform work in adherence with quality standards
  • Basic knowledge of Mig Welding Equipment
  • Working towards apprenticeship or certification
  • Problem solving and reasoning skills
96

Welder Resume Examples & Samples

  • Perform some welding on objects involving moderate safety and load requirements working in one position
  • Graduation from an acceptable Technical Training Program or an accredited trade school for welding
  • Interpretation of blue prints, including weld requirement symbology
  • At the end of 90 calendar days the candidate must be able to maintain an acceptable level of production, quality and attendance as determined by management
  • The ability to accurately and honestly check one's own work for quality assurance
97

Welder Resume Examples & Samples

  • Must have been in current position for 6 months
  • Three month of previous hands-on welding experience in a manufacturing, fabrication or professional environment
  • Successful completion of an internal welding test
  • Must have working knowledge of fixturing and weld set up parameters (amps, volts, etc.)
  • The ability to read and comprehend blueprints including weld requirement symbology
98

Welder Resume Examples & Samples

  • Weld components as required by internal or customer specifications
  • Deburr and inspect welds to assure conformance to specification
  • Minimum High School Diploma
  • 5 years experience as Welder
  • Training and certification to customer required specifications
99

Welder Resume Examples & Samples

  • Interprovincial Red Seal Welder certification
  • High School Diploma or equivalent (ie. GED)
  • Eligible to obtain F3-F4 and Pressure Welding Tickets; F5 ticket considered an asset
  • At least three (3) months of related industrial work experience
  • Valid Class Five (5) driver’s license
  • Ability to work proficiently in a variety of tasks
  • Demonstrated problem solving skills to determine best repair solutions
  • Demonstrated computer skills including experience working with maintenance planning programs such as Maximo or similar
  • Exceptional planning and organizational skills as well as mechanical and operations aptitude
  • Strong commitment to safety, environmental compliance and plant reliability
100

Welder Resume Examples & Samples

  • Performs a variety of general and specific metal welding fabrication and repairs to include: operation of plasma cutters, oxyacetylene torches and MIG, TIG, and ARC welding machines to repair or fabricate items made of ferrous and non-ferrous metals
  • Performs PMCS and operator level maintenance on oxygen-acetylene torches, plasma cutting machines and various welding machines
  • Fabricates large variety of parts and special projects as required utilizing various grinders, drilling machines, hand tools, shearing machines and manual metal brake machines
  • Welds components in flat, vertical or overhead positions. Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits
  • Clamps, holds, tack-welds, heat-bends, grinds and/or bolts component parts to obtain required configurations and positions for welding
  • Upon detection of faulty equipment and/or defective materials, notifies supervisors
  • Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding
  • Monitors the fitting, burning and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material
  • Recognizes, sets up and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment
  • Positions, aligns, and secures parts and assemblies prior to assembly using straightedges, combination squares, calipers and rulers
  • Ensure strict compliance to safety practices and support the AC FIRST Safety Policies and Procedures
  • Instills a safety first mentality within respective work areas and a culture that achieves low accident rates and minimal lost-time injuries
  • Adhere to ISO Policies, Procedures, and Work Instructions in support of the AC FIRST Quality Management System
101

Welder Resume Examples & Samples

  • Welds components in flat, vertical or overhead positions. Ignites torches or starts power supplies and strike arcs by touching electrodes to metals being welded to complete electrical circuits
  • Detects faulty operation of equipment and/or defective materials and notifies supervisors
  • Recognizes, sets up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment
  • Positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers and rulers
  • Assist the Supervisor with assigning and monitoring the work load
102

Welder Resume Examples & Samples

  • Moves, sets up and adjusts equipment and selects proper rod to perform work assigned
  • Prepares surface to be welded; burns, gauges, fits, tacks and welds as necessary to complete repair (Example: splices, patches, shims, cracks, etc.)
  • Locates and tests areas to be welded for leaks by use of soap suds and air, etc., rechecking as necessary
  • Finishes weld by removing slag and grinding when necessary
  • Assists other workmen in placing, fitting and attaching of parts as assigned
  • Performs minor layouts required in performance of prescribed duties
  • Keeps work area in a clean and orderly manner
  • Use judgment in operating the equipment and selection and use of welding electrodes
103

Welder Resume Examples & Samples

  • Reports quality and production concerns and issues to supervisor
  • Cross trains on all work stations within department and plant as assigned
  • Conducts operator level preventative maintenance on all assigned equipment according to the preventative maintenance schedule
  • Keeps work environment neat and clean
  • Follows position Job Safety Analysis (JSA) and wears required personal protective equipment
  • Completes all production paperwork as required
104

Welder Resume Examples & Samples

  • Selects equipment and plans layout, assembly and welding
  • Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc or gas welding equipment
  • Make accurate measurements using tape measure and precision measuring equipment
  • Read and understand blue prints
  • Assembles parts by bolting and riveting
  • Repairs products by dismantling, straightening, reshaping and reassembling parts
105

Welder Resume Examples & Samples

  • Develop process parameters and process techniques for various alloy material welding and hardsurfacing applications
  • Formulate and develop fixtures and tooling for welding applications
  • Interact and communicate effectively with the government inspectors, in-house inspectors, engineers and client representatives
  • Utilizes hand tools, measuring tools (e.g. vernier scale, pyrometer, multimeter, etc.) and fiber optic bore scope equipment
  • Performs basic mathematical functions
  • Maintains and promotes a safe, clean and professional work environment
  • Willingness to learn new and challenging applications (e.g., engineering test valves) and to work under pressure (e.g. rush orders, new alloy materials)
  • Interacts effectively with computers and mechanized equipment programming
  • Performs informational liquid penetrant inspections
  • Initiatie corrective action recommendations for manufacturing methodology and product design improvements
  • Additional responsibilities as assigned by Supervisor
  • Ability and aptitude to learn program and interact with mechanized equipment
  • Ability to read, write and communicate effectively in the English language
  • Ability and aptitude to learn welding and hardsurfacing: OAW, PTA, GTA processes
  • Ability and aptitude to learn to interpret engineering drawings
106

Welder Resume Examples & Samples

  • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives
  • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives
  • 5 years experience as welder
  • Educational, training, and experience requirements may be modified at the Managements Team’s discretion
  • Physical demands: While performing duties of job, employee is required to stand; occasionally walk and sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Lifting up to 40 lbs. Repetition with activity
  • Work environment: The noise level in the work environment is usually moderate
107

Welder Resume Examples & Samples

  • 1 year certificate from college or technical school preferred
  • 2 to 4 years’ experience in manufacturing welding capacity and/or training preferred
  • 2 years experience in basic structural fabrication and custom fit up
  • Experience welding vertical & horizontal fire tubes for various types of heated process units
  • Mig welding
108

Welder Resume Examples & Samples

  • Tig Welding experience
  • Ability to pass Koch-Glitsch Mig and Tig weld tests
  • Ability to read and follow Koch-Glitsch Weld Procedures Specifications (WPSs)
  • Ability to read standard/metric tape measures
  • Experience reading and interpreting blueprints and details
  • Experience working in a production environment
  • Technical School Welding Certificate
  • Robotic Welding Experience
109

Welder Resume Examples & Samples

  • Positive attitude and willingness to work with others
  • Strong math skills preferred
  • Ability to read and decipher blueprints
  • Read a tape measure
  • Excellent Communication skills both verbal and written English required
110

Welder Resume Examples & Samples

  • Perform MIG and TIG welding of aluminum boats (hulls, bottoms, parts) according to drawings and specifications
  • Complete required documentation of welded boats for production purposes
  • Sand and grind boats as needed
  • Move boats and/or parts to paint carts or overhead hoist system
  • Responsible for compliance to safety policies and procedures, as well as identifying risks and hazards prior to job completion
  • Ability to locate and use the HazCom labels and MSDS information
  • Welding Certification from accredited college is desired
  • Basic computer, math, reading and measurement proficiency
  • Must be able to read drawings and specifications
  • Knowledge of 5S, Kaizen and LSS preferred
  • Ability to follow established safety processes to handle chemicals and equipment to weld aluminum
  • Detailed and organized
  • Self starter, team player with a good safety awareness
  • Dependable daily attendance is required
111

Welder Resume Examples & Samples

  • Lays out, positions, aligns, and fits components together
  • Sets up equipment and welds parts using arc, gas shielding arc, automatic wire feed, or gas welding equipment
  • May repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch and hand tools
  • Have knowledge of commonly-used concepts, practices, and procedures within a particular field
112

Welder Resume Examples & Samples

  • High School diploma or GED equivalent
  • 6 months of preivous hands-on welding experience in a production environment
  • The ability to accurate read a measuring tape
  • The ability to read weld symbols and blueprints
  • The ability to lift up to 50 pounds
  • One year of previous qualified welding experience in a professional environment
113

Welder Resume Examples & Samples

  • Assemble product to engineering drawing specifications; precisely following technical work instructions and quality plans
  • Ensure quality specifications are met through visual inspection and the use of high tolerance test and inspection equipment, including calipers and micrometers
  • Uphold a high level of safety by wearing PPE, and following operating and housekeeping procedures
  • Manage pace and attention to detail to meet metrics regarding quality, productivity, and safety
  • Maintain equipment in proper working condition
  • Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment
  • Demonstrate a reliable, dependable work ethic with a personal commitment to quality workmanship
114

Welder Resume Examples & Samples

  • Interprets specifications, drawings, blueprints, shop job orders and, process sheets
  • Uses a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tubes penetrations, studs, etc
  • May perform related task such as thermal cutting (PLASMA or TORCH) and grinding
  • Knowledge of commonly-used concepts, practices, and procedures within a particular field
  • Assigns work to qualified personnel
  • May train new shop personnel on machinery, tools and test equipment required for quality construction of products
115

Welder Resume Examples & Samples

  • Fabricate and assemble commercial truck subframes through the effective use of tools and assembly equipment
  • Read and follow detailed blueprints that show how to assemble subframes
  • Produce quality product while focusing on given standards
  • Log all necessary entries of time and materials into electronic repair order system
  • Ensure the shop area is kept clean, tidy and free of hazards at all times
  • Performs other welding duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business
  • 3+ years of welding experience required
  • 3G Welding Certification preferred
  • PC skills required
  • Ability to weld pipe and structural tube
  • Ability to weld MIG, TIG, and Stick
  • Knowledge of basic hand tools and ability to remove and install various parts by hand
  • Ability to work in non-climate controlled environment
  • Ability to read blueprints strongly preferred
116

Welder Resume Examples & Samples

  • Ability to assemble weldments from drawings
  • Fabricate sheet metal bins, enclosures, covers
  • Operation of Shear
  • Operation of a TIG welder, setup, and maintenance
  • Operate drill press, and band saw
  • Utilize hand grinders/sanders to perform grain finishing
  • Control raw material inventory utilizing shop routers and computer
  • Cut raw material per engineering drawings
  • Group required parts prescribed in BOM
  • Weld and setup sub-assemblies for welders
  • Control raw material inventory and ensure correct materials are allocated
  • Proficient blueprint and tape measure knowledge, with attention to dimensions and tolerances
  • Fabrication shop practices
  • Organizational proficiency
  • High School, trade school or apprenticeship program
117

Welder Resume Examples & Samples

  • Develops welding sequences, techniques and procedures
  • Performs welding parts and/or assemblies subject to pressure such as hydraulic and aqueous lines, structural and/or stress assemblies, complete manifold assemblies, and parts and/or subassemblies of light gauge material
  • Setup and operate automatic and semi-automatic weld equipment, including mig, tig, plasma arc, and resistance welding equipment as required with little or no supervision
  • Setup, fit-up, trimming, assembly, forming, position, align, clamp, bolt, and tack-weld diversified and involved assemblies and subassemblies
  • Prepares resistance welding schedules and machine setups on machines requiring qualifications
  • Works in conjunction with customer surveys and teams, and with vendors, subcontractors and suppliers in audits and selling situations projecting a positive company image
  • Setup operation to weld experimental, prototype and production assemblies and/or subassemblies developing procedures as required, for qualification, certification and/or making weld schedules on various types of metals
  • Repairs self-detected defects per engineering instruction
  • Performs functions to include receiving and movement of material, issuing of stock, cycle counting, packaging, shipping and all computer systems transactions to support product flow and data integrity
  • Performs daily maintenance and minor machine repairs on all types of weld equipment
  • Performs self-inspection as a “Certified Employee”
  • Maintains a clean work environment in full compliance with company standards, customer and government regulations
  • Assists in the development and maintenance of a business culture which supports the Company’s overall business objectives and goals
  • Trains other employees as required
  • HS diploma or GED plus Two-year trade school or equivalent education/experience
  • Minimum 3 years of direct experience
  • Knowledge of engineering drawings and weld symbols
  • Able to weld ferrous and nonferrous metals
  • Able to read and interpret work instructions, engineering drawings, tool designs, etc
  • Capable of becoming a “Certified Welder” by passing weld test certification. (removed: AMS-STD 1595 as this may not mean the other welders outside aerospace mfg. industry)
  • Ability to follow and comprehend both written and verbal instructions as well as present information in verbal and written form
  • Must have basic mathematical skills in proportions, percents, and decimals
  • Ability to work well in a diverse environment
118

Welder Resume Examples & Samples

  • Responsible for performing and inspecting pipeline and structural welding required for construction and maintenance of Company facilities including the installation, operation and maintenance of all gas pipeline related facilities
  • Responsible for installing, relocating, replacing, maintaining and repairing gas lines
  • Inspect pipeline and structural welding required for construction and maintenance of Company facilities including the installation, operation and maintenance of distribution and transmission facilities
  • Provide oversight and inspection to ensure asset protection and compliance with company procedures of excavation activities near pipeline facilities
  • Responsible for inspection duties per Company policies including: completion of required documentation, as-built drawings, contractor oversight and supervision, act as Company representative during construction activities, report progress to Operations Management and ensure proper reporting and compliance with Safety and Environmental policies
  • Inspect/oversee the construction and /or maintenance activities performed by third parties
  • Train and oversee company and third party personnel as required (i.e. personnel in progression, contractors, visitors, etc.)
  • Perform governmental compliance activities (PHMSA, State Agencies, EPA, USFS, etc.)
  • Perform mapping, record keeping and data entry duties per company policies
  • Participate in the development of O&M Procedures, Site Specific Procedures, project scopes and work plans
  • Complete all applicable documentation and record keeping
  • Perform all work in compliance with Company Standards, procedures, regulatory and tariff requirements
  • Other daily, weekly and monthly duties as assigned
  • Three years plus gas welding experience preferred
  • API 1104 welding certification preferred
  • Knowledge of basic properties of plastic pipeline materials
  • Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems
  • Ability to work with a team, take direction from supervisors, keep required job schedules, focus attention on details, and follow work rules
  • Ability to perform essential functions of the job
  • Job planning and organizational skills
  • Work from job related blueprints, sketches and diagrams
  • Operate micrometers, calipers, and thickness testing equipment
  • Operate all plastic fusion equipment including all tools required for maintenance and emergency on plastic pipelines
119

Welder Resume Examples & Samples

  • Set welding machine voltage and wire speed for proper fusion of metals following standard work methods and detailed drawings
  • Perform basic maintenance of welding machine to insure proper working order
  • Inspect parts for obvious defects
  • Keep work area clean and organized by supervisor
120

Welder Resume Examples & Samples

  • Use of welding and brazing techniques and equipment and hand tools to repair, overhaul and manufacture component, engine and a/c structural parts
  • Manufacture tools and equipment to support operational requirements
  • Ensure compliance with the Original Equipment Manufacturers (OEM) manual specifications, service bulletins, build sheets, quality procedures, airworthiness directives; and company policy and procedures
  • Performs maintenance and housekeeping duties to ensure a clean and safe work environment
  • A level education
  • Experience in a similar role in the aviation sector
  • Experience in implementation of new repairs of components
  • Ability to create and implement of new procedures
  • Ability to train other employees
  • Good level of English
  • Ability to organise own workplace
  • Knowledge of Part 145
121

Welder Resume Examples & Samples

  • Develops welding projects by analyzing work orders, prints, and completed assembly; calculating requirements; determining appropriate welding techniques
  • Organizes work by studying work orders, drawings, diagrams, manuals, and specifications; gathering supplies and equipment
  • Fabricates by using equipment to clean, prepare, cut, burn, and weld pieces; setting-up and measuring assemblies; selecting appropriate method
  • Documents actions by completing records
  • Keeps welding and torching equipment operating by following operating instructions; troubleshooting breakdowns; by requesting supplies; performing preventive maintenance; calling for repairs
  • Dismantles and moves equipment by dissembling components and parts; disconnecting power; securing equipment for moving; crafting components and parts for shipping
  • Maintains safe work environment by being aware of foot traffic when moving equipment; following standards and procedures; complying with legal regulations; Lock out Tag out
  • Maintains equipment records by completing logs
  • Updates job knowledge by participating in educational opportunities
  • Welding and Fabrication
  • Safety Oriented
  • Power Tools, Lifting
  • Dependability and Teamwork
  • Manufacturing Quality
  • Equipment Maintenance
  • Fabrication Experience
  • Welding experience; stick, MIG, wire feed and cutting tools: plasma, acetylene and propane torching and air gauging
  • Inspection Tools and Tooling Job Knowledge
  • Willing to work weekends of shift work if needed, Environmental extremes: indoor/outdoor
122

Welder Resume Examples & Samples

  • Set-up/run RT Quality Pipe Weld – All Positions (6G)
  • Set-up/run Carbon Arc Gouging
  • Able to make any UT or RT Weld Repair
  • Set-up/run all structural non-code welds
  • Ability to lead others and plan ahead – Good
  • Ability to make correct decisions – Good
  • Ability to work safely – Best
  • Average Percent of weld repairs - <0.5%
  • Knowledge of welding processes
123

Welder Resume Examples & Samples

  • Knowledge of how to run all welding equipment and knowledge of welding processes
  • Ability to read blue prints, follow instructions, read measurements, interpret welding specification and welding procedures
  • Must be able to use and read welding measuring devices to include but not limited to squares, levels and tape measures
  • Ability to read and interpret written instructions
  • Detail Oriented
  • Ability to perform basic mathematical calculations
  • Working knowledge of shop scheduling, material provisions, shop layout and process throughput
  • High School Diploma or equivalent diploma
  • Prior ASME vessel weld experience preferred
124

Welder Resume Examples & Samples

  • Must be able to take and follow written and oral instructions
  • Must be able to communicate in English (both written and oral) as it relates to the job
  • Must possess basic math skills to include but not limited to adding, subtracting, multiplying and dividing for the purpose of calculating material fabrication
  • 1 year or less experience
125

Welder Resume Examples & Samples

  • Set-up/run RT & UT Quality Vessel Weld Processes – 2 (GMAW/FCAW)
  • Set-up/run RT Quality Pipe Weld – Flat (3G)
  • Set-up/run UT Quality Nozzle Welds – Flat (3G)
  • Set-up/run Carbon Arc Gouging – Limited
  • Ability to lead others and plan ahead – Fair
  • Ability to make correct decisions – Fair
  • Speed of accomplishing tasks – Moderate
  • Ability to work safely – Better
  • Average Percent of weld repairs - <1.0%
  • 1+ year of experience.(i.e. JohnSmithResume.pdf or JohnSmithResume.doc)
126

Welder Resume Examples & Samples

  • Speed of accomplishing tasks – Slow
  • Ability to work safely – Good
  • Average Percent of weld repairs - <1.5%
  • 1 year or less of experience.(i.e. JohnSmithResume.pdf or JohnSmithResume.doc)
127

Welder Resume Examples & Samples

  • Able to fit to tight tolerances
  • Able to work in a safety oriented environment
  • Self-motivated and a team player
  • Dedicated to producing a quality product
  • Able to suggest improvements in the product or the process
  • Able to communicate well ¿ verbal and written
  • Ability to align parts to exacting tolerances and secure welds of maximum strength with minimum distortion
  • Ability to lift a minimum of 50lbs
  • 3 years Prior Experience as a TIG welder
  • Ability to operate a plasma cutter and acetylene torches
  • Ability to weld vertical, flat, and overhead welds with a good penetration and a quality appearance
  • Use electric welding equipment, micrometers, squares, clamps, fixtures and hand tools
  • Plan welding sequences, select electrode type and size and set current and voltage
  • Must have own Welding Hood and Gloves
128

Welder Resume Examples & Samples

  • Understand Kanban system in welding, press and shipping departments
  • Effectively communicate any possible problems or defects with the weld machines
  • Follow instructions, participate in TPM (Total Plant Management) and the cleaning of machines (weld spatter, wiping down face gauges, sweeping floor underneath machines)
  • Knowledge of conducting quality checks on every part. Perform torque, destruct and thread tests
  • Complete daily operator data sheets
  • Take the finished totes to inspection or to the end inspection location
  • Knowledge and comprehension of quality control paperwork and checks
129

Welder Resume Examples & Samples

  • MIG & TIG welding of mild and stainless steel
  • Cutting and grinding material to length
  • Layout jobs for construction
  • Assembling steel parts
  • 3-5 years of previous welding experience
  • Ability to communicate effectively with supervisors and co-workers
  • 1st Shift: Monday - Thursday
  • 6:00 AM until 4:30 PM
130

Welder Resume Examples & Samples

  • Set up welding machines based on the job at hand or using a Welding Procedure Specification
  • Read and interpret blueprints and/or drawings to determine the specific welding requirements
  • MIG weld steel, aluminum and stainless steel components based on the specifications of the blueprints and/or drawings
  • 1-3 years of welding experience
  • Ability to read blueprints or schematics
  • Must be able to read a tape measure
  • Must be able to pass a drug screen
131

Welder Resume Examples & Samples

  • Understands and applies safe use and operation of the equipment and communicates with other employees about safety related matters
  • Performs all functions in a safe manner in accordance with company policy and procedures
  • Joins, fabricates, and repairs metal and other weld-able material by applying appropriate welding techniques
  • Fits and welds product to specifications
  • Must be able to work overtime and weekends as needed
  • Minimum 1 year of welding experience
  • Past fabrication experience (STICK)
  • Previous aggregate experience preferred
132

Welder Resume Examples & Samples

  • Receive daily tasks from supervisor for specific projects or task of the day
  • Perform minor servicing and maintenance of welding equipment and supplies such as hand, power, and hydraulic tools
  • Reliable attendance is essential to performance in this role
  • Must be able to work nights
  • Experience with material knowledge and experience with materials such as metals and alloys
  • Ability to make decisions in a timely manner
  • Push/Pull: Exertion of force on or against object (50 lbs.) to move it from one location to another
133

Welder Resume Examples & Samples

  • Prepares and aligns metal products for welding
  • Welds metal parts together
  • Tacks and grinds
  • Operates drills
  • Operates tools (Pneumatic, rose bud)
134

Welder Resume Examples & Samples

  • Primary focus on a safe work environment and employing safe work practices on a consistent basis
  • Perform a variety of welding and cutting applications (including air arcing)
  • Lay out and perform complex repairs with a high level of accuracy and quality
  • Assess equipment repair needs and developing repair processes
  • Troubleshoot, maintain and perform minor repairs to most assigned tooling: wire feeders and welding machines
  • Work in a diverse team environment
  • Work efficiently and productivity at all times to maintain a billable rate according to department and company objectives
  • Minimize loss/spoilage of raw or in process materials
  • Forklift trained
  • Sand blast booth task trained
  • Fire extinguisher trained
  • Confined space trained
  • LOTO task trained
  • Fall protection task trained
  • Certified 1/16" 3G and 4G
  • Proficient at Carbon Arc Gouging
  • Proficient with Oxy/Fuel Torch
  • Certified 3/32" 1G
  • Understand Weld Symbols
135

Welder Resume Examples & Samples

  • A working knowledge of using e-mail
  • The ability to successfully demonstrate hands-on pulsed gas metal arc welding during an on-site capability test
  • The ability to work over ten hours a week in overtime when required for business needs
  • A strong working knowledge of Microsoft Outlook
  • Welding experience in a professional environment
  • Over five years of non-professional welding experience (i.e., hobby or other recreational activity)
136

Welder Resume Examples & Samples

  • Perform all of the tasks of a Vessel Welder I
  • Three (3) years vessel welding experience
  • Ability to perform all preventive maintenance on machines, tools and equipment, with minimal assistance
  • Ability to assist in the training of same or lower grade co-workers within the department
  • Ability to diagnose product and/or equipment problems and resolve, as necessary
  • Ability to meet the requirements of a majority of Welding Procedure Specifications
  • Proficient in vessel layout, fitting and using hand torches
  • General knowledge of PECOFacet product line, required
  • High School Diploma and/or GED
  • Related experience and/or training or equivalent combination of education and experience
137

Welder Resume Examples & Samples

  • Fill the board of indicators of its area
  • Do works of repair in the welded elements being used equipment of weld or oxicorte
  • Execute routines of preventive maintenance in its equipment of operation to maintain it in suitable conditions of work
  • Carry out order and cleaning of its area
  • Secondary Completed 1 year of experience in welding
  • Approve the required training
138

Welder Resume Examples & Samples

  • Six months to one year welding experience in pressure vessel shop, preferred
  • FCAW, MIG, SMAW welding processes, required; SAW and TIG, a plus
  • Ability to pass prescribed welding procedure tests in accordance with ASME Section VIII
  • Basic knowledge of reading blueprints, specifically symbols used for welding instructions, preferred
  • Basic knowledge of pneumatic hand tools, cutting torch, hoist, forklift and overhead crane, preferred
  • Ability to read and interpret documents such as work instructions, safety rules, operating and maintenance instructions, and procedure manuals
  • Forklift operation, ability to pass an in-house certification and clean driving record, a plus
  • Ability to read a standard tape measure
  • Six (6) months to one (1) year welding experience in tank or structural shop, successful completion of a technical welder training program or an equivalent combination of experience and education, preferred
139

Welder Resume Examples & Samples

  • Determine project requirements, including scope, assembly sequences, and required methods and materials, according to blueprints, drawings, and written or verbal instructions
  • Lay out, measure, and mark dimensions and reference lines on material, according to drawings or templates, using calculators, squares, and tape measures
  • Fasten seams and joints together with welds, bolts, and/or metal drive clips, to assemble components into a building skid or platform
  • Maneuver completed units into position for assembly using overhead cranes and forklifts
  • Tack-weld fitted parts together
  • Operate mig manual or semi-automatic welding equipment to fuse metal segments
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as gas metal arc welding equipment, plasma cutting equipment and oxyacetylene torches
  • Examine work pieces for defects
  • Knowledge of materials, methods, and the tools involved in the construction or repair of steel structures
  • Mathematical skills such as adding, subtracting, multiplying, dividing, fractions and using a tape measure
  • Being reliable, responsible and dependable
140

Welder Resume Examples & Samples

  • 1+ years of welding experience
  • Knowledge of welding processes – TIG/MIG/Stick welding
  • Read paperwork and use computer to retrieve work documents and record production numbers – Windows based applications and SAP as well as Excel spreadsheets
  • Manufacturing drill bits experience is ideal
141

Welder Resume Examples & Samples

  • High school diploma or general education degree (GED) with formal trades training
  • Minimum of two years related experience; or equivalent combination of education and experience
  • Ability to read and interpret documents such as blueprints, welding symbols, safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to write routine reports and correspondence
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Possess the ability to apply the concepts of basic algebra and geometry to their work
  • Must be able to furnish required hand tools for their role. (A list of tools is available upon request.)
  • Grind and fabrication experience
  • Understanding of manufacturing business systems. (Global Shop Solutions)
142

Welder Resume Examples & Samples

  • Perform routine welding fabrication and repair tasks under minimal supervision
  • May be assigned complex or R&D tasks
  • Maintain Welding Certification
  • 2-5 years of welding experience preferred
  • Hold current welding certification
  • Must be able to read blueprints and have Weld Symbol Knowledge
  • Proficient in all four weld processes (TIG copper, Aluminum, MIG Aluminum, TIG Steel)
  • Strong product knowledge
  • Demonstrates quality work, understands quality criteria
  • Ability to plan and accomplish goals
143

Welder Resume Examples & Samples

  • Follow required safety and work procedures
  • Set-up, adjust, program, and perform preventative maintenance on welding equipment and local exhaust
  • Use MIG welder to assemble metal products to specification, from job order and document production data at a level of output that minimizes production delays
  • Produce strong, penetrated welds that are smooth, non-porous and consistent
  • Follow required procedures and use appropriate jigs and fixtures to assist in the assembly and welding process
  • Utilize quality checks to meet product standards
  • Maintain a clean and orderly work area to 5S Standards
  • Implement all aspects of AGCO Lean and Quality Management systems
  • Comply with all safety rules, policies and procedures
  • Report any unsafe practices and/or conditions to their supervisor
  • Wear required personal protective equipment (PPE) and report any defective PPE
  • Report all near-misses, incidents, injuries, illnesses, including mobile equipment or property damage
  • Participation in the site Safety and Health Program
  • Must be able to successfully pass the GSI weld school and assessment
  • Previous welding experience required
  • Ability to use various tools including (tape measure, hand grinder, plasma cutter, acetylene torch, etc.), read blueprints and tape measure
  • Ability to read, write and use basic math skills (addition, subtraction, multiplication, division, fractions and angles)
  • Strong mechanical aptitude with the ability to follow precise instructions
  • Ability to communicate effectively with peers, managers and across departments
144

Welder Resume Examples & Samples

  • Minimum of 6 months production welding experience
  • The employee must be able to perform basic mathematics, read and understand blue-prints, have the ability to follows charts and tables
  • Must be able to interpret standard AWS weld symbols
  • Employee must have first hand experience with the use of measuring tools
  • Must have ability to use shop related tools and equipment
  • Continuous standing, sitting, lifting, bending
  • Must be able to lift a minimum of 40lbs. and more with assistance
  • Must have good problem solving skills and be able to make instant decisions that affect safety, quality and productivity
  • Knowledgeable of welding techniques and manufacturing processes through prior experience or training programs
  • Must be able to a read tape measure and have good understanding of fractions and numbers to three decimal places
145

Welder Resume Examples & Samples

  • MIG weld aluminum and steel components based on the specifications of the blueprints and/or drawings
  • Ensure work is done safely and meets quality standards
  • Follow, create and help maintain Welding Procedure Specifications
  • Operate machinery used in the production process or assist machine operators
  • Assemble items as instructed by floor supervisor or team lead
  • Keep work areas clean and organized and take proper care of all equipment and facilities
  • Follow all company rules and policies
  • Provide a great level of attention to detail and focus on the given task
  • Follow all safety rules and quality standards
  • Work with team members to maximize productivity and efficiency
  • Prepare product for shipment in accordance with packaging and company standards
  • Exerting 50 to 100 pounds of force occasionally, and with assistance, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly to move objects
  • Uphold all ISO and OSHA standards applicable to the responsibilities above
  • Six months to one year related experience in welding
  • Experience with aluminum and steel required
  • Experience with MIG welding required
  • Ability to identify and measure material
  • Ability to follow instructions given both verbally and in written form
  • Ability to read blueprints, drawings, calipers, tape measures and angle gauges
146

Welder Resume Examples & Samples

  • High School Diploma or General Education Degree(GED)
  • Completion of training as a welder through avocational technical school or through work experience
  • At least 5 years of experience in the field of welding
  • Must pass a 6GR welding test
  • Welding knowledge (Symbols, processes, and procedures)
  • Good Oral and written communication preferred
147

Welder Resume Examples & Samples

  • Experience: Two years of relevant work experience in Stick, Mig. Brazing, Gas welding, and Soft Soldering on a variety of metals and alloys
  • Required to exert physical effort in handling objects less than 30 pounds occasionally
  • Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) most of the work day
  • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements most of the work day
148

Welder Resume Examples & Samples

  • Performs tack welding and finish welding of piping systems and structural parts utilizing both SMAW, FCAW, GTAW and GMAW welding procedures. Certification to CCC procedures required
  • Clean polishes and grinds welds to company design specifications
  • Perform hydro-testing of vessels, reactors and other carbon equipment
  • Assist senior welders and fitter as may be required
  • Works from drawings/sketches to determine weld size, weld location and weld process
  • Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs
  • Assist with incoming parts inspection and final product inspection and complete appropriate documentation
  • Operate Fork trucks, jib cranes
  • Assist in other areas of the plant as assigned
  • Equipment Skills: Forklift, hand tools including power tools, jib hoist and overhead cranes
149

Welder Resume Examples & Samples

  • Must demonstrate weld ability on one or more product lines
  • Must be able to work with minimal supervision
  • Must demonstrate knowledge of layout, fit-up and tacking on one or more product lines
  • Must have demonstrated weld ability on all product lines
  • Must be able to work with no supervision
  • Ability to train and assign work to others in the department
  • Assist in documenting standard work procedures and provide training on same
  • Ability to operate all welding equipment including manual machines and robot welder if assigned
  • Ability to read, interpret and understand blueprints
  • Proper safe use of all hand tools
  • Ability to understand and follow written and oral procedures
150

Welder Resume Examples & Samples

  • Cut, fit pipe, and weld
  • Perform all types of welding; stick, mig, tig etc
  • 2 year technical degree and/or certified in all types of welding
151

Welder Resume Examples & Samples

  • Must be experienced in MIG, TIG and Arc (stick) welding
  • Demonstrated ability to read blueprints / drawings
  • Proven working experience with tools, preferably in manufacturing settings
  • Quality awareness combined with fast working hands
  • Knowledge of metal properties
  • Initiatives to take corrective actions
  • Responsible and reliable
  • Written and oral aptitude in English
  • Physically fit
  • Moderate to heavy lifting required
  • Maintain departmental housekeeping and 5S standards
  • Basic math and reading comprehension skills
  • Ability to bend, stoop, kneel, crouch
  • Ability to use hands to reach and to handle or feel
  • Manual dexterity in hands for tool usage, preferably in manufacturing settings
  • Ability to visibly inspect product
  • Manitowoc Foodservice – Mississauga, Ontario Canada manufactures a full line of commercial ovens, ranges, griddles, grills & counter top cooking equipment (including food warmers, cheesemelters, deck-type gas ovens, countertop electric ovens, refrigerated worktables, equipment stands, refrigerated equipment stands, fryers, griddles, hotplates, deck-type electric ovens, restaurant electric ranges, heavy-duty electric ranges, charbroilers, convection ovens, heavy-duty gas ranges, restaurant gas ranges, stock pot stoves, broilers & salamanders). The facility in Mississaugais a division of Manitowoc Foodservice – parent company, The Manitowoc Company, Inc
152

Welder Resume Examples & Samples

  • Ability to MIG weld mild steel
  • Ability to MIG weld stainless steel
  • Ability to perform basic fitting
  • Ability to adjust machine according to department manual(s)
  • Ability to remove material using grinding process
  • Ability to read drawings and inspect parts for basic dimensions
  • Ability to perform basic layouts (positioning and alignment)
  • Ability to inspect parts against complex engineered drawings
  • Ability to spray transfer MIG weld
  • Capability to examine weld bead for acceptable attributes
  • Ability to identify types of copper, stainless grades, etc
  • Knowledge of flux core, shielded wire
  • Ability to cope and fit
153

Welder Resume Examples & Samples

  • Set-up and operate welding equipment (GMAW, GTAW, Brazing, Soldering and Stud Welding) using prescribed methods and procedures to weld parts within acceptable tolerances and standards
  • Ability to build weldments through manual layout process, when required
  • Read and interpret STERIS® welding blueprints, Geometric Dimensioning and Tolerancing (GD&T) including standard welding symbols, travelers, and other working documents
  • Use required measuring instruments and gages to check and ensure parts meet dimensional requirements
  • Communicate clearly, both verbally and written, with Engineers, Quality personnel, supervisors, and fellow team employees
  • Complete all projects, assignments, and duties as directed and instructed by the area supervisor
  • Take responsibility for the quality of all parts by inspecting and immediately reporting any problems, discrepancies/or irregularities to the supervisor
  • Follow 5S methodology to keep machines and work area clean, neat and orderly on a daily basis
  • Assist in training other employees in the welding department
  • Remain safety conscious at all times, wearing all prescribed personal protective equipment and by observing all safety rules stated in the Employee Handbook
  • Complete any and all projects, assignments and duties as directed and instructed
  • Conform to all policies, procedures and rules of conduct as communicated through the Employee Handbook, Bulletin Boards, Newsletters and any other vehicle by which information is distributed by STERIS Management
  • Ability to perform duties with minimal or no supervision if needed
  • High school education or GED required
  • Minimum two years experience ferrous and non-ferrous metals
  • Must be able to satisfy AMSE welder performance qualification testing in both GMAW and GTAW welding of stainless, mild steel, and aluminum
  • Must be able to read and interpret welding blueprints, including all standard welding symbols
  • Must be able to use precision measuring instruments and gages
  • Must be capable of lifting 40 pounds without assistance
  • Ability to communicate effectively with co-workers and members of the leadership team
  • Assist with training other operators
  • Ability to make decisions and stay quality focused
  • Ability to understand and follow work instructions, both written and oral
  • Ability to adapt to conditions as dictated by business requirements
  • Ability to work with others
  • Willingness to work overtime, if required
  • Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory, Visual Management, Waste elimination, and Root Cause Problem Solving are preferred
154

Welder Resume Examples & Samples

  • Reports any discrepancies to the Supervisor
  • Follows set-up guidelines and procedures to assemble and tack weld unit by using various tools
  • Welds unit to print specifications following guidelines and procedure to control warpage
  • Inspects welds and checks critical measurements
  • Inspects chains, clamps, hammers, and other tools for damage
  • 1 to 2 years related experience and/or training or equivalent combination of education and experience
  • Experience in welding heavy plate welds
  • Experienced with Welding Forest Product equipment
  • 2 year technical degree
155

Welder Resume Examples & Samples

  • Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding technique
  • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process
  • Inspects completed welds to determine structural soundness
  • Inspects, repairs, installs, modifies, and performs welds, and maintains welding equipment
  • Maintain inventory, tools, supplies and work area in an organized manner
  • May be required to perform troubleshooting and repairs at customer’s site
  • Operate both plasma and flame cutting torch
  • Knowledge of codes and industry standards applicable to work performed
  • Good at establishing clear directions and lays out work in a well-planned and organized manner. Monitors process, progress and results
  • Be able to read and understand floor plans and work orders for projects
  • Ability to complete material and labor take offs from blue prints required
  • Able to work outside in variable weather conditions
  • Ability to use both manual and power tools
  • Ability to use mathematics to calculate length, width, depth, etc. as it relates to construction and accuracy of specs and requirements
  • Ability to follow written and spoken instruction
  • Ability to safely perform tasks
  • Maintains current certification through industry standard agency or process
  • Prior experience in the construction industry performing welding and commercial welding new construction and remodel construction required
  • Able to read Company’s construction documents (provided in English) and provide guidance to construction team to complete necessary work; fluency in spoken Spanish preferred
  • Knowledge of LEAN construction a plus
156

Welder Resume Examples & Samples

  • Check inventory to ascertain that all necessary parts and quantities are available, and if necessary, requisition appropriate quantity of items from material handler
  • Select appropriate weld jig. Position and secure piece parts in weld jig. Makes appropriate adjustments to welder for application required
  • Tack and perform quality weld, meeting required specifications and maintaining tolerances. Able to perform smaller weldments
  • Continually strive to improve production methods, equipment performance and quality of product
  • Identify and apply Lean methodologies to ensure processes are scientifically controlled and continuously improved. Willingly perform other duties as assigned by supervisors
  • All employees must cooperate fully with the safety and environmental programs and obey all safety rules
  • All employees must be able to work in a team environment and fully cooperate with peers
  • All employees must follow all policies and procedures
  • All employees must have regular attendance
  • High school diploma or general education degree (GED); and 1 year of Welding Experience in a Manufacturing Environment; or an Associates Degree in Welding
157

Welder Resume Examples & Samples

  • Set welding machine voltage and wire speed for proper fusion of metals for mechanical strength
  • Produce complex welded assemblies to close tolerances where considerable knowledge and skill in the field of welding are required to produce quality results
  • Perform regular maintenance and minor repairs on welding machinery to insure proper working order
  • Perform setups, production, and inspection of welded assemblies following detailed drawings
  • Inspect welded assemblies and components for non-obvious defects
  • Perform other duties assigned by supervisor
158

Welder Resume Examples & Samples

  • Accuracy with measurements
  • Ability to understand and execute verbal/written instructions
  • Desire to maintain a clean, organized work area
  • Willingness to learn new tasks and responsibilities as the role requires
159

Welder Resume Examples & Samples

  • Receives oral or written instruction on size and type welds required
  • Accomplishes quality welding on assignments using flat, horizontal, and vertical positions
  • Performs flame cutting to prescribed dimensions
  • Performs arc welding on black-iron or low carbon steel, and other materials of similar complexity
  • Cleans and prepares work for welding using hand machine tools
  • Performs additional duties as assigned. Practices on-the-job safety and housekeeping as required or as is necessary
160

Welder Resume Examples & Samples

  • Applies appropriate welding processes to fabricate utility structures according to layouts, work orders, blueprints, schematics and sketches using automatic welding equipment
  • Minimum of 1 year of experience in flux core welding in a manufacturing/production environment
  • Ability to pass a FCAW 1G weld test
161

Welder Resume Examples & Samples

  • Strong computer skills; Basic Microsoft Office skills required
  • Ability to read and understand mechanical drawings and bills of material
  • Good problem solving and organizational skills
  • Understanding of LEAN/Continuous Improvement concepts, principles and practices
  • Strong leadership and communication skills with excellent follow-up and sense of urgency
162

Welder Resume Examples & Samples

  • Must be a self starter and eager to learn
  • Must have completed Vocational Course MIG in welding or have 1 year experience in welding
  • Must pass a background & Drug Screen
  • Must pass a Pre-hire assessment test
  • Must read tape measure
163

Welder Resume Examples & Samples

  • Ability to weld components in flat, vertical, or overhead positions
  • Employees must have good eyesight, manual dexterity, and hand eye coordination
  • The employee is outdoors and exposed to varying and/or extreme weather conditions (i.e., heat, wet, cold, etc.)
  • Sufficient level language and math to read technical manuals, record repairs on report forms, operate welding machine, and perform other tasks
  • 2 - 3 years' experience working on fixed and mobile equipment
  • Good mechanical skills are required, knowledge of raw materials, production process is preferred
  • Must have excellent driving skills and the ability to maintain satisfactory customer and public relations in performance of duties
164

Welder Resume Examples & Samples

  • Perform welding and repair of trash containers and compactors as well as trash trucks in our fleet
  • Maintains a clean, safe work area in compliance with Corporate and OSHA standards
  • Performs all work in accordance with established safety procedures, documenting parts usage, and accounting for repair times
  • Ability to effectively communicate needed repairs or tasks
  • Typical schedule is Monday-Friday, occasional Saturdays as needed
165

Welder Resume Examples & Samples

  • Performs container repairs as assigned
  • Weld Container Delivery containers
  • Maintains a clean, safe work area in compliance with corporate and OSHA standards
  • 2 years experience Welding
166

Welder Resume Examples & Samples

  • Work effectively with differing customers and cultures
  • Maintain a safe work environment and ensure compliance with safety objectives and policies
  • Must be able to function with minimal supervision
  • Troubleshoot technical problems and issues and determine technical solutions
  • Act as local on-site representative to customer's organization
  • Ability to understand and operate plasma, and acetylene cutting equipment
  • Understand technical data, plans/blueprints and publications pertaining to but not limited to USAF vehicles, and equipment
  • Must have knowledge of database software, spreadsheet software, presentation software, and word processing software
  • Certified to the American National Standards Institute (ANSI) standards for the appropriate metals in the manufacture of the vehicles
  • Proficient to perform all welding operations including armor patching, cutting, attaching weldments, and heating/bending metal
  • Use (but not limited to) oxygen/acetylene torches, stick welders, wire welders including MIG/TIG and flux-core wire using noble-gas shields
  • All welds and metal work shall meet or exceed Navistar Defense/industry standards
  • Shall be certified to AWS D1.1 and must present qualifications as part of the employment screening
  • Five years’ experience as a certified welder, with experience in MIG (metal inert gas), TIG (tungsten inert gas), ARC (electrical arc welding) and Gas welding operations
  • Ability to obtain and maintain a Secret Clearance
  • Ability to obtain a US Passport
  • Physical Requirements/Working Environment
  • Must be able to work outdoors for extended period
  • Must be able to work in maintenance shop environment
  • Physically able to perform the assigned duties
  • Must be willing and able to work in extreme temperatures
  • Capability to lift 55lbs without assistance
  • Must be able to meet medical and physical fitness requirements to enter into and maintain deployment in accordance with customer requirements
  • Live and work in an austere environment in an active combat zone most likely under U.S. Govt control on a U.S. Military secured compound
167

Welder Resume Examples & Samples

  • Rework own products when a mistake is made
  • Proficient in assigned welding techniques such as GMAW, GMAW-Metal-Core, FCAW, PAC & AAC
  • Read and complete quality control check sheets
  • Understand quality policy and how it applies to the job and adhere to all quality standards
168

Welder Resume Examples & Samples

  • High School diploma or GED required
  • 3 Years of welding experience in a manufacturing environment, graduates of a certified welding program will be considered
  • Experience working in a team based, lean manufacturing environment is preferred
  • Knowledge of Fabrication processes including Turret Press Operation, Laser Operation and/or Press Brake Operation would be a plus
  • Positions and clamps components of fabricated metal products prior to welding
  • Sets up and adjusts welding equipment as needed, changing tips, adjusting temperature, feed rates, gas flow, type of gases, etc
  • Welds metal parts together by applying proper welding procedures such as mig, tig, and resistance welding within design
169

Welder Resume Examples & Samples

  • 5 years of experience with welding
  • Knowledge and experience completing welds that pass visual before being X-rayed or dye pinned
  • Certification with AWS D17.1 and D1.2 preferred
170

Welder Resume Examples & Samples

  • This position will be responsible for welding, assembly, and fabrication of various medium to large scale structures and assemblies
  • Minimum of 1 year of experience with TIG welding
  • 5-10 years of experience with TIG welding
  • Experience with DC aluminum TIG welding is highly preferred
  • Experience with Class A aluminum GMAW (MIG) welding
  • 1 year of experience working with overhead cranes & forklifts
  • Experience operating Jet Line welding equipment
  • Experience in blue print reading and lay out
  • Performing x-ray quality welds on aluminum alloy, inconel, and stainless steel
  • Robotic welding and programming experience
  • Familiar with welding specifications AWS D17.1, AWS D1.2, MIL-STD-2219, MIL-STD-1595
171

Welder Resume Examples & Samples

  • This position will be responsible for welding assembly and fabrication on various small to medium scale structures and assemblies
  • At least 1 year of experience with TIG welding
  • Experience self-inspecting welds to pass AWS D17.1 Class A visual examination criteria before being X-rayed or penetrant inspected
  • Certification with AWS D17.1 and D1.2
172

Welder Resume Examples & Samples

  • Operates electric-welding, acetylene-welding, MIG-welding, TIG-welding or other assigned welding apparatus to perform complex welding on designated parts, completed assemblies and other items, including some experimental and prototype items, working on a broad range of corrosive resistant materials
  • Monitors quality of work throughout all stages of welding, making dimensional and visual checks
  • Takes action to correct faults in work. Makes simple set-ups of assigned welding equipment for designated production work, following detailed drawings and sketches, welding practices and procedures
  • Performs required burning, soft soldering, and brazing, as required
  • Takes initiative to plan standard work sequences and lays out work on parts and assemblies. Provides assistance to other welders as needed
  • Provides assistance to industrial technicians and machinists as needed
  • Maintains assigned equipment and work area in a clean and orderly condition
  • Requests necessary maintenance to equipment as needed
  • Operates hand grinding and chipping equipment on parts, as required. Licensed / certified to operate forklift and other lift equipment
173

Welder Resume Examples & Samples

  • Responsible to carry out duties for Health, Safety, and Environment in accordance with the HS&E Agreement for Employees - Addendum
  • Maintain high quality MIG/TIC/ARC welding of all tool and cast steels to avoid porosity
  • Carry out flame hardening, hardness testing of steels and flame cutting
  • Responsible for applicable QEMS policies, procedures and work instructions
  • Induction hardening
  • Perform other reasonable duties as assigned
  • Recognized Certificate of Qualification as Welder
  • Minimum of 3-5 years previous experience
  • Familiarity with welding of casting and tool steels (i.e. GM 190, 246, 245)
  • Good communication skills, attendance and performance required
  • Previous tooling/machine shop experience an asset
  • Must be able to work independently
174

Welder Resume Examples & Samples

  • 2-5 years of relevant gas utility experience
  • General knowledge and ability to perform basic construction and utility tasks such as equipment operation, pipefitting, etc
  • Current motor vehicle Operators License and CDL medical card
  • Will be required to obtain CDL license and CDL medical card
  • Will be required to obtain CDL license within six months of hire date
  • Demonstrate mechanical aptitude
  • On-call
175

Welder Resume Examples & Samples

  • Operate metal welding machinery including rod, mig, and tig
  • Operate metal working/handling machinery including Metal cut off saw, band saw, cutting torch, forklift and Overhead cranes
  • Safety, Sanitation, Security – Maintain a clean, neat and orderly work area. Comply with OSHA and MSDS standards
  • The above statements are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified; nothing restricts the company’s right to change, assign, or reassign duties and responsibilities at any time or for any reason
  • Welding Certification a plus
  • Welding circumferentially while parts are rotating
  • Ability to weld with a variety of alloys including mild steel, 316L Stainless, alloy 825, alloy 20 to 4140, 13 chrome, and other Corrosion Resistant Alloys
  • Knowledge of the well screen product lines for the purposes of fabrication is a plus
  • Watching gauges, dials, or other indicators to make sure a machine is working properly
  • Read, interpret, and work from drawings, diagrams, sketches, or material specifications
  • Works with a combination of welders and personnel from other departments to accomplish manufacturing project objectives
  • Proficient in communicating with colleagues and in creating a team working environment
  • Knowledge of welding tools, including their designs, uses, repair, and maintenance
  • Ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem and communicating it to a supervisor
  • Ability to see details at close range (within a few feet of the observer)
  • Ability to concentrate on a task over a period of time without being distracted
  • Accurately complete/maintain necessary reports/records in a timely and legible manner, according to applicable procedures and/or work order
  • Commit to long hours of work when necessary to reach goals
  • Organize tasks and responsibilities in manner that maintains production output standards
  • Perform routine maintenance inspections according to the standard operating procedure
  • Use time efficiently
  • Communicate effectively within and across divisions
  • Deal with frequent changes, delays, or unexpected events
  • Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
176

Welder Resume Examples & Samples

  • Performs welding and repair of trash containers, hauling containers and trash compactors as well as trash trucks in our fleet
  • 2 to 3 Years Experience in Stick and MIG welding; welding certified a plus
  • Valid Driver’s License with a clean driving record a must
  • Waste industry experience a plus with stable work history
177

Welder Resume Examples & Samples

  • Mechanically inclined, production oriented, and safety and quality conscious
  • Basic math skills
  • Detail oriented with ability to inspect material for quality conformance through the use of measuring devices and drawings
178

Welder Resume Examples & Samples

  • Performs basic welding work related to the manufacturing of products
  • Utilizes engineering drawings and / or verbal instructions to lay out, position, and weld a variety of pre-cut steel parts to fabricate industrial filtration housings and components
  • Plans sequence of welding operations to insure optimal work flow and proper attachment of structure, supports, components and equipment when welding job is complete
  • Sets up welding unit (MIG, TIG, resistance, spot, stud, etc.) to desired amperage. Obtains specified electrode based on bead, type and thickness of metal
  • Operates welding machine or guides electrode, maintaining length of arc and speed of movement, to form fusion as judged from color of metal and size of molten puddle
  • Welds along vertical or overhead lines as required
  • Manually applies filler rod, or cleans work piece with wire brush or portable grinder as required. Positions work with clamps and/or jigs prior to welding, and may flame-cut metal plates or other support members
  • Utilizes material handling equipment to move material into, around and out of the department
  • Follows all 5S practices and supports lean activities, as well as safety regulations policies and procedures
  • Participates actively in the Site Safety Program
  • Performs other duties and responsibilities as necessary
  • 5 years of related experience preferred
179

Welder Resume Examples & Samples

  • Manages subcontract claims and variations received/issued by CWC
  • Provide advice and guidance to business as required
  • Extensive (anticipated at least 5 years) commercial contracts and contract/subcontract management experience
  • Knowledge of contract law
  • Leadership -- a demonstrated ability to lead people and obtain results through others
  • Flexible, as some out of hours and weekend working may be required. Some domestic and foreign travel may also be required
180

Welder Resume Examples & Samples

  • Consistently display positive behavior that supports the organization’s goals and objectives
  • Actively participate in safety meetings, pre-task risk assessments and safe work procedures
  • Communicate and perform duties to provide information with planning and completion of tasks
  • Operate various types of shop equipment such as floor sweepers, bobcats, fork lifts, hand tools, overhead cranes, welding and cutting equipment, hydraulic rams
  • Maintain a clean and organized work area
  • Follow proper repair procedures for task preparation, repair and completion (pre-heat, post-heat)
  • Perform weld repairs and fabrication ensuring quality and workmanship
  • Ability to read prints, lay-out and fabricate projects from start to finish
  • Candidates may be subject to skills testing as part of the interview process
  • Technical or practical training in the welding field
  • Candidates who have completed formal training courses or related degree program preferred
181

Welder Resume Examples & Samples

  • Minimum 4+ years shipyard or related work environment
  • 5XXX Aluminum and Stainless Steel Welding
  • GTAW Certifications
  • Knowledge of AWS Welding Symbols
  • Ability to utilize multiple Weld Gauges
  • Must be able to obtain and maintain Rapid Gate pass
  • Candidates may be required to travel to different BAE sites or Naval Bases
  • Must be able to use hand tools and power tools safely and efficiently
  • Must be flexible to working all shifts (1st, 2nd, 3rd) or extended Hrs
  • Must have own basic tools
  • Must pass written and hands-on weld test
182

Welder Resume Examples & Samples

  • Welder must have experience in the following welding processes: (To clarify this point: the operator must be able to setup, operate, troubleshoot and guide the work of others as well as be familiar with the terms, and definitions associated with the process and possess a comprehensive understanding of the specific welding method)
  • Submerged Arc
  • Stick
  • Flux Core, Semi-Automatic
  • Stud Weld
  • MIG, Solid Wire, Semi-Automatic
  • Steffan Cutter
  • Welder will possess a certificate indicating completion of a welding training program of 3 or more years or equivalent experience in the specific areas.(They will be verified by the Company.)
  • Welder will be required to successfully complete a written test and successfully weld coupons which meet the ASME Code, Section IX for the processes and allows stipulated by Mueller Co. Pressure vessels as well as structural and non-structural welds will be tested
  • Capable of performing all functions in the work center including
  • Layout to mark metal before welding
  • Can be called to verify other welds and rework as necessary
  • Maintain working area in a clean and orderly manner
  • Make suggestions to improve costs, quality, safety and efficiency of operation
  • Any other duties that the welder is qualified for as directed by the supervisor
183

Welder Resume Examples & Samples

  • Performing a variety of welding and cutting applications (including air arcing)
  • Laying out and performing complex repairs with a high level of accuracy and quality
  • Assessing equipment repair needs and developing repair processes
  • Experience with electrodes and outer and inner-shield wires
  • Troubleshooting, maintaining and performing minor repairs to most assigned tooling; wire feeders and welding machines
  • Working in a diverse team environment
  • Maintain a billable rate according to department and company objectives
  • Must possess advanced skill level with numerous welding applications and mechanical troubleshooting with diagnostic equipment
  • Will work with a higher level Welder to learn to interpret blueprints and how to follow a scope of work
  • Responsibility to prevent damages due to mistakes or carelessness to equipment or materials. Prevent loss which may result from negligent inspection or testing; from spoilage or wastage of raw or in process materials
  • Forklift Task Trained
  • Fire Extinguisher Task Trained
  • Confined Space Task Trained
  • LOTO Task Trained
  • Fall Protection Task Trained
  • Hexchromium Task Trained
  • MSHA Certified
  • Certified 3/32” 1G
  • Certified 1/16” 3G
  • Certified 1/16” 4G
  • Understands Weld Symbols
  • Welder Certification
  • Employee must be able to pass a weld certification according to Joy Global Quality standards
  • Application of advanced trades mathematics
  • Ability to interpret complicated drawings, specifications, charts, tables, handbook formulas
  • Ability to use all varieties of precision measuring instruments
  • Equivalent to 1 to 3 years applied trades training in a particular or specialized occupation
  • Over 1 year up to and including 3 years with numerous welding and cutting applications including air arcing and dual shield wire
  • Flexible work schedule
184

Welder Resume Examples & Samples

  • Operate the machine or product
  • Welding
  • Familiar with welding
  • Hard working
185

Welder Resume Examples & Samples

  • Takes direction from Lead Person or Supervisor in a cooperative manner
  • Welds metal parts together (primarily steel) for Billy Goat machines using gas welding and any combination of arc welding processes in compliance with Billy Goat company standards for efficiency and quality
  • Sets welding machine voltage and wire speed for proper fusion of metals following standard work methods and detailed drawings
  • Performs basic maintenance of welding machine to insure proper working order
  • Possesses ability to read and interpret prints and drawings, and to perform first piece inspections of welded parts according to print specifications. Must be able to read/understand basic weld symbols
  • Performs related tasks such as drilling, plasma cutting, grinding, spot-welding and roll-forming
  • Maintains an acceptable level of productivity and quality to meet company performance standards
  • May be utilized and/or cross trained in other areas of weld/fab department or other production departments to assist when necessary in meeting company demand
  • Performs other duties as requested
  • Maintains acceptable level of punctual and regular attendance for all scheduled work hours
  • Requires a sense of urgency in performing duties and the flexibility to work with quickly changing priorities to meet business demands. Work assignments may change during the course of a day
  • Previous experience using pulse welding guns preferred
  • Previous experience working in a production environment helpful
186

Welder Resume Examples & Samples

  • Perform manual finish welding operations
  • Set up, operates and adjusts one or more N/C multifunctional manipulators with end effectors
  • Perform automatic welding operations
187

Welder Resume Examples & Samples

  • GTAW welding in 304/316 SS for high purity/ vacuum
  • Must be a self-starter able to work with minimum supervision
  • Familiar with standard blueprints and tolerances
  • Expected to adjust to a dynamic work load and aggressive deadlines
  • Able to provide feedback to engineering and supervision to facilitate continuous improvement and repeatability
  • Contribute to a team environment with a focus on 6S/ Lean philosophies
  • Must be quality conscience and able to produce world class results
  • Open to constructive criticism and new methods
  • Repetitive work load with high mix/high volume
188

Welder Resume Examples & Samples

  • Welding and fabrication
  • Ability to cross train to other cells
  • Must pass internal welding test
  • Must be able to read a tape measure and read blue prints
  • Must be able to use air, power and hand tools, especially a torch and grinder
  • Able to gather and analyze relevant information, and coordinate work with other team members
  • Contributes information and ideas to development of project plans
  • Identifies complex problems and recommends solutions
  • Makes sound decisions on routine matters in support of immediate work group's goals
  • Functions independently within context of day-to-day activities
  • Work requires analysis using established procedures to solve routine problems
189

Welder Resume Examples & Samples

  • Have welding certification in MIG and/or TIG
  • Ability to read tape measure
  • Ability to convert metric and English units
  • Ability to use calipers and other measuring equipment
  • Ability to read and interpret assembly drawings
190

Welder Resume Examples & Samples

  • Must be able to life 60 lbs
  • Must have completed Vocational Course in MIG (GMAW) welding or have 1 year experience in welding
  • GMAW welding skills required. (Must be able to pass an AWS weld certification test)
  • Must be able to operate MIG welders, measuring tools, grinders, torches, other hand tools and hammers
  • Must comply with all safety rules and regulations
  • Experience in overhead crane operation helpful
  • Must be able to meet criteria on pre-hire assessment
  • MUST be able to pass Background & Drug Screen
  • Must be able to work night shift
191

Welder Resume Examples & Samples

  • Must own leather steel toe boots
  • Must have completed Vocational Course MIG in welding or have one (1) year experience in welding
  • GMAW (Gas Metal Arc Welding) welding skills required
  • Must possess a valid AWS certification OR Must be able to pass an AWS weld certification test
  • Experience in overhead crane operation, is preferred
  • Must be able to pass Background & Drug Screen
  • Must pass pre-hire assessment
  • National Career Readiness Certificate is required
192

Welder Resume Examples & Samples

  • Typical repairs include, but are not limited to, repair of chassis and body components, Removal/Install of hydraulic cylinders and suspension systems removal/replace. Cutting/welding repairs to vehicle floors, bodies, packing blades, rails, etc. as needed
  • Install some parts that require lifting more than 75 lbs and above, whether underneath or above truck
  • Reads and interprets VCRs (vehicle condition reports) and/or repair orders, communicates with supervisor and/or driver for clarification of problems
  • May be required to make emergency road calls to make repairs on trucks that break down while driving a collection route
  • 2 years experience Welding in the following
  • GMAW - Gas Metal Arc / All Positions
  • Ability to speak conversational Spanish in the work place preferred
  • Ability to read, write, comprehend and communicate in English is required
  • A valid drivers license
193

Welder Resume Examples & Samples

  • Responsible for reading, interpreting and performing welding techniques to fabricate parts. This includes possessing basic mechanical knowledge and use of hand tools; following instruction on how to load jigs, and weld parts
  • Responsible for keeping tools and equipment in good working order
  • Weld both vertical and horizontal plane geometry
  • Responsible for any re-work or corrections as necessary to ensure a product meets specifications
194

Welder Resume Examples & Samples

  • Accountable for completion of daily work assignments
  • Works under direct supervision
  • Monitors working environment for compliance with quality, safety, environmental,and health
195

Welder Resume Examples & Samples

  • Regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms
  • Ability to climb on ladders and on the units and balance; stoop, kneel, crouch, or crawl
  • Ability to lift and/or move up to 50 pounds
  • Specific vision abilities: close vision, peripheral vision, depth perception, and the ability to adjust focus
196

Welder Resume Examples & Samples

  • Perform welding and repair of trash containers and trash compactors as well as trash trucks in our fleet
  • Ability to trouble shoot electrical/hydraulic systems on compactors and balers typically 110V systems
  • Maintain and track inventory in the repair shop
  • Maintain a clean, safe work area in compliance with corporate and OSHA standards
  • Perform all work in accordance with established safety procedures
  • Prepare work orders, invoicing and other tasks as assigned
  • 1+ years experience in stick and MIG welding
  • Experience welding on trucks, in fabrication and sheet metal work is a plus
  • Electrical and hydraulic experience preferred
197

Welder Resume Examples & Samples

  • Acts as “leadperson” engaged in making layout of and fabricating different types of pipe and structural steel for both new and replacement installations, using all three methods of welding (1) oxygen-acetylene (2) electric arc and (3) micro-wire by making such welds as: horizontal roll position butt welds employing both forehand and backhand methods; fittings-fixed position, top and side connections, branch connections, size on size tee, outlet up, horizontal and down, horizontal, vertical and 45°fixed position butt welds of both standard and heavy wall pipe
  • Makes "hot taps" on compressor station piping and pipe lines with existing pressure still present, for the purpose of connecting new lines and related equipment without interrupting the normal flow of gas
  • Uses blueprints and makes mathematical calculations for degree and rolling degree offsets around, over and under obstructions, division of pipe surfaces into equal parts for branch connections such as tees, bull plugs, etc., using shop mathematics, blueprints, dimensional charts and measuring devices such as carpenter square, micrometers, rules, tapes, etc.; alignment of pipe joints and pipe to fittings to insure that the internal wall surfaces coincide and the abutting pipe ends are parallel and at right angles to the longitudinal axis of the pipe with a 1/16" root opening with a tolerance of 1/32"; and vertical alignment of valves, riser, blowoffs, etc
  • Fabricates supply parts such as: pulsation dampeners, volume bottles, valve and regulator settings, drips, saddles, nipples, etc. Cuts, miters, fits, lines-up and weld pipe and fittings
  • Designs pipe stands, jigs, rollers and related items to aid in the fabrication and erection of pipe and steel structures. Fabricates without blueprints, guardrails, workbenches, meter settings, equipment, parts, etc
  • Trains and develops newer and inexperienced welders; when engaged in making welds on tie-in installations, responsible for spotting of side booms, winch lines, A-frames and hydraulic jacks to insure proper line-up; on "hot-taps" and responsible for setting up and operation of tapping machine
  • Ensures that welding truck is properly serviced and outfitted with adequate welding equipment and material and properly serviced
  • Set-up and operate air moving equipment
  • Must be proficient in reading and interpreting x-rayed and NDI of welds and make recommendation on most appropriate action
  • Assists in the qualifying of contractor’s welders - testing involves cutting welding coupons, measuring and figuring tensile strength of coupons through mathematical calculations, operating testing machine and madding qualified judgment as to whether the welder is to be accepted or rejected per the company specifications; makes minor repairs to welding equipment
  • Manages contractors and vendors while on-site
  • Responsible for appropriate assigned duties for completion of work orders utilizing computerized maintenance system program
  • Uses computer for various tasks including but not limited to, time entry, e-mail, intranet, etc
  • Assists in planning of work and participates as necessary in safety and/or team meetings and discussions
  • Pressure test pipe for appropriate MAOP are record in accordance with policy
  • Assist in all construction/operations related activities if required
  • Possesses appropriate welder qualification cards and requalifies as required
  • NDI/NDT certification may be required
  • Must be able to obtain DOT Class D license and subject to required physical if necessary
  • Must be capable of obtaining required op-qual tasks for the position
  • Must be able to pass company welding test prior to job offer
  • Must be willing to be confined-space trained
  • Knowledgeable of appropriate health and safety training
  • This position requires candidates to
  • Successfully complete a pre-employment medical screening, including drug and alchol testing
  • Be subject to call-out and overtime
  • Some travel to other facilities for training and necessary maintenance
  • The successful candidate must be able to respond to the St Albans, WV facility within 45 minutes in the event of an emergency
  • Depending on the qualifications of the applicants, the successful candidate may be offered a position at a more appropriate level and/or ladder
198

Welder Resume Examples & Samples

  • Must be proficient in TIG and MIG applications
  • Must be proficient with 16 Ga 316SS #4 finish (No burn through/Sugar)
  • Must be able to do vertical ups on T-Joints and Outside corner joints
  • Must be able to operate within 1/32 tolerance (or less)
  • Some knowledge of SS Metallurgy preferred
  • Need to know how to use calipers, tape measure etc
199

Welder Resume Examples & Samples

  • Ability to calculate figures and amounts using basic mathematical concepts
  • Specific skills include: basic computer skills, good communication skills (listening, verbal, written), good mechanical aptitude, and ability to read measurement devices with accuracy and precision
  • High school diploma or equivalent degree and/or a minimum of two years mechanical press, robot welder, drum welder, and transit equipment operator experience is preferred
200

Welder Resume Examples & Samples

  • TIG experience in Inconel and Stainless Steel
  • Experience in vacuum welding will be preferred
  • Perform basic job functions as directed by Shift Lead or Supervisor safely and efficiently
  • Follow Standard Operating Procedures and/or Work Instructions exactly as written to produce a quality product
  • Fabricate components for use in a solid oxide fuel cell electrical power generator
  • Perform maintenance and repairs on equipment
  • Maintain all machine shop equipment
  • Notify management of shop consumables (i.e. cutting oils, welding gasses, tooling and bits, etc) in order to maintain inventories
  • Create assembly and fabrication fixtures
  • Address and recommend improved methods for creating hardware, and assemblies
  • Must demonstrate high levels of quality in welding exotic materials, such as Inconel
  • Must work well on cross functional teams
  • Be flexible on shifts and working hours
  • H.S. diploma or equivalent technical/military training preferred
  • 5-7 years working experience in a capital equipment environment, where hands on manufacturing practices were required
201

Welder Resume Examples & Samples

  • Assisting in various integrated communication and marketing activities (e.g., social media, internet initiatives)
  • Supervising Customer Care Reps
  • Coordinating and supervising events including event logistics and set-up
  • Developing and maintaining sales and marketing collateral such as: newsletters, brochures, direct mail pieces and prospect kits
  • Executing a wide variety of initiatives that involve direct mail, email broadcast campaigns, internet initiatives, outbound calls, marketing trade shows and events, public relations, customer communications, media advertisements, promotions, and other marketing plans
  • Writing and maintaining content and providing monthly updates to company website
  • Implementing a project management system for documenting and tracking activities including photo shoots and mass mailings
  • Attending boat shows, company sponsored promotions, and events
  • Ability to multitask and operate under solid pressure, and meet tight deadlines
  • Excellent Excel, PowerPoint, and Word skills
  • Sound understanding of marketing principles
  • Excellent copywriting skills
  • Work collaboratively and efficaciously as a team member
  • Be self-motivated, confident, energetic, and creative
  • Communicate excellently verbally and in writing with all kinds of people
  • Bachelor's degree in marketing, journalism, communications or related field
  • Computer proficiency with Microsoft Office
  • 1-4 years of experience in a marketing position
  • Experience with boating is preferred
202

Welder Resume Examples & Samples

  • Minimum 1 year welding experience
  • Operate manual, semiautomatic and/or CNC welding equipment under minimal supervision for any of the following weld processes IE: SMAW, SAW, FCAW, GMAW and/or GTAW (manual and auto)
  • Read, understand and follow routers, blue prints, manufacturing documents, specifications and procedures
  • Examines work pieces for defects and constantly checks parts during welding process to maintain welding parameters according welding procedures
  • Ability to operate a forklift safely
  • Ability to operate an overhead crane safely
  • Experience with oil and gas field equipment
203

Welder Resume Examples & Samples

  • High School Diploma or GED equivalent; preferred
  • Or Completion of training as a welder through a vocational technical school or equivalent,
  • Or 1 or more years experience performing manual or CNC welding operations,
  • Or have skills, knowledge and abilities to operate and perform manual or CNC welding operations
  • Pass a 1 G welding test
  • Gouge with and arc- gouger
  • Perform good, clean quality work
  • Fall protection training
  • Man lifts training
  • 5+ years experience is highly desirable
204

Welder Resume Examples & Samples

  • Safety is the highest priority at Williams, and a person's commitment to safe operations is a requirement for all applicants. The ideal candidate will actively participate in safety meetings and develop knowledge in all company safety policies and industry safety standards
  • Perform pipe fabrication welds, tie-in welds, and welding in-service pipelines with pipe sizes up to 42” diameters
  • Complete, supervise and/or inspect projects in support of plant, pipeline, corrosion, measurement, controls, and engineering
  • Act as an inspector by monitoring contract work, and making certain that job specifications are followed
  • Interprets readings from weld inspection equipment
  • In adherence with Williams’ standards, calculates and prepares reports
  • Demonstrate safety as the utmost priority
  • Possess a high school diploma or equivalent
  • The successful candidate will be required to test and maintain current welder certification per Williams Gas Pipeline standards, develop certified welding inspector skills and NDT certifications
  • Possess manual dexterity with the physical ability to work in situations which require bending, kneeling, squatting, reaching, and lifting/carrying items up to fifty (50) pounds
  • Demonstrate knowledge, skills, and job related experience
  • Ability to read and interpret various company policies, procedures, and manuals
  • This position requires a significant amount of overnight travel to support operation areas throughout the company, working other than normal hours, overtime, schedule changes, the ability to respond to call-outs, and work in adverse weather and extreme temperature conditions
  • Demonstrate the ability to work in a team environment, and as an individual with minimal supervision
  • Effectively interface with many landowners, regulatory officials, company contacts, co-workers, and internal and external customers
205

Welder Resume Examples & Samples

  • Provide welding, cellulose (mild steel) and low hydrogen, and other construction related support to Construction Services
  • Participate in pre-job planning and staging of equipment and resources prior to executing work activities
  • Coordinate work activities and provide active control to third party contractors and able to work with and oversee contractors
  • Welding branch connections on high pressure natural gas pipeline systems in preparation for hot-tap work
  • Shop fabrication welding of piping assemblies and hydro testing
  • Assist and preparation of pre-job documentation
  • Job Safety Analysis (JSA); review and creation of JSA's
  • Ensure all work tasks and duties comply with TransCanada's Operating Procedures (TOPs), Community, Safety and Environment policies, procedures, and related state legislation
  • Provide support for emergency pipeline repairs to both natural gas and oil pipeline systems
  • Hot tap high pressure pipelines (Knowledge with TD Williamson tapping equipment considered an asset)
  • High degree of respect for safe work habits and the care and maintenance of tools
  • Knowledge of labor, safety, and environmental regulations
  • Proven strong planning and organization skills
  • Ability to work independently and make decisions with minimal direction
  • Capacity to understand company practices and procedures and develop/apply site specific procedures
  • Effective interpersonal skills and ability to work well in a team environment
  • Willingness to learn and work towards continuous improvement
  • Ability to work with a computer and interface with management systems for expense preparation, timesheet reporting, and e-mail
  • Familiarity with MS Office including Word and Excel or similar software would be an asset
  • Knowledge of API 1104 welding regulations
  • Applicant must demonstrate ability to pass welding test per API 1104 regulations prior to hiring
  • Minimum 3 years experience in pipeline construction or related field
  • Post secondary education in a related field or a welding certificate is considered an asset
  • Experience welding on high pressure natural gas and/or oil pipeline systems, cellulose (mild steel) and low hydrogen
  • This position will require significant overnight travel primarily to various states
  • This position is overtime eligible and may require extended work hours including an 8-6 work schedule, 8 days on and 6 days off
206

Welder Resume Examples & Samples

  • Perform welding, fabrication and maintenance on rig equipment
  • Perform repairs on high-pressure lines, mud lines, water lines and centrifugal pumps
  • Replace rusted out plates
  • Build and replace walkways, handrails, tool boxes and pallet forks
  • Install I beams for hoist, wellheads and stands for office and galley equipment
  • Perform pipe fitting and pipe welding
  • Cut sand welds bell nipple to fit each location of well and brazes fitting for refrigerant and air conditioning
  • Accurately maintain quantities of full and empty oxygen tanks, acetylene and welding leads
  • Monitor tools, cutting hose and all steel on rig
  • Perform all work safely and in accordance with the Company’s HSE policies and procedures
  • Abide by all Company policies and procedures
  • Other duties and special projects as assigned
  • A High School diploma is required
  • Should have at least 2 years of specific work experience
  • Must possess necessary licenses, certificates and registrations to safely perform the functions of a welder
  • Must be able to operate hand and power tools specific to welding
  • Should have good PC skills to include all MS Office products
  • Must have good written and verbal communication skills and be able to effectively communicate with staff,management, customers and vendors
207

Welder Resume Examples & Samples

  • Set up and weld high temperature alloys in the repair of gas turbine blades using TIG process
  • Perform blending repair of turbine blades as required
  • Ensure following instructions and comply all quality requirements
  • Ensure equipment care, housekeeping and control of safety and schedule
  • Perform tasks as assigned by work leader, supervisor or engineers
  • Completion of secondary level or higher education. Candidates with NITEC in Mechanical Engineering or TIG welding experience is preferred
  • At least 3 Year(s) of working experience in the related field is required for this position
  • Basic command of English (speak and read)
  • Able to perform rotating shift
208

Welder Resume Examples & Samples

  • Cuts and/or joins metal parts to fabricate or repair steel boxes and offices, using tools such as a plasma cutter, welder, torch, chop saw grinder and other power tools
  • Maintains records of work completed in order to provide an accounting of activities in on the shop floor
  • Maintains inventory of supplies routinely used in the operation of the welding shop by inspecting stock and ordering goods as needed. Inspects parts and supplies received in order to verify accuracy of invoices
  • Welder
  • Torches
  • Chop Saw
  • Grinder
  • Power tools
  • Computer – for time keeping
  • 1-2 Years Experience welding
  • Forklift certification preferred
209

Welder Resume Examples & Samples

  • Assembly of framework and installation of graphics into supplied frames according to customer specifications
  • TIG welding of aluminum extrusion
  • Operating angle roll bender, will train - experience is a plus
  • Use of hand tools - drills, chop saws, etc
  • Packaging graphics, frames and accessories to ensure quality delivery to customers
  • Ruler Reading Skills
210

Welder Resume Examples & Samples

  • Complete welding assignments and procedures for construction and repair of all site structural stands on time, safely, and in a professional manner
  • Cut, trim, or scarf metal objects, fit and fabricate metal components to dimensions for building and assembling test site structural forms
  • Collaborate with welding lead coordinator to ensure that the proper weld procedure, type of material and rod size are accurately assessed for each welding project
  • Analyze engineering drawings and specifications to plan welding operations where procedural information is unavailable
  • Utilize hand welding and flame-cutting equipment to weld together metal components and parts to assemble structural forms
  • Ensure all welds are complete by buffing off and inspecting the weld for proper tie-ins and pinholes as well as cleaning off all buckshot and slag
  • Utilize zinc coat spray on welds when working with existing structures
  • Obtain and maintain licenses, operator permits or certifications as required
  • Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly
  • 3-5 years preferred, in the use of oxy acetylene, fitting, arc grouping and electronic welding equipment related to the trade
  • Prefer certification in SMAW, GMAW or GTAW
  • Knowledge in standard tools, materials, motions, and practices of the welding trade
  • Knowledge in ferrous and non-ferrous metals in relating to welding and brazing
  • Knowledge in occupational hazards and effective safety precautions of the trade
  • Knowledge in arc air procedures and equipment
211

Welder Resume Examples & Samples

  • Must have minimum welder trade certification or Equivalentto NTC-2
  • Minimum four (4) years experienced in manual or semi-automatic welding. (Welders with less experience but relevant skills will also be considered)
  • Able to speak, read and write in English
  • Must be able to work shifts
  • Should be a good team player
212

Welder Resume Examples & Samples

  • Successful Candidate must be proficient in downhill (cellulosic) and uphill (low hydrogen) welding techniques
  • Successful candidate must pass the UGI Construction Weld Test as a condition of employment
  • Successful candidate must pass the UGI In Service Weld Test within 6 months of the hire date
  • Knowledge of equipment operation and pipeline construction
  • Candidate must have mechanical ability and be able to do physical labor
  • Must be able to pass a Self-Contained Breathing Apparatus (SCBA) test and pre-employment physical
  • Maintain a valid driver's license
  • General computer knowledge
  • Experience in natural gas, construction, maintenance or related field preferred
213

Welder Resume Examples & Samples

  • Identifies work to be done by following standardized communication procedures. Cooperatively flexes into other areas as assigned
  • Works on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. Resolves routine questions and problems, refers more complex issues to higher levels
  • Ensures product and process quality is maintained through visual inspection and testing as required. Bring concerns about product and process quality to attention of area management
  • Thoroughly documents all product travelers ensuring proper quality documentation as applicable to a given process. Enters data and performs computer transactions as appropriate
  • Contributes input to and cooperates with improvement teams and lean manufacturing efforts to help improve quality, shorten cycle times, and reduce manufacturing costs
  • Performs preventative maintenance on, and ensures calibration of, equipment, tools, and fixtures, as required
  • Willingly participates in inter and/or intra departmental job rotations as needed
  • Keeps work areas clean and organized, in accordance with 5s + 1 principles
  • Knows and follows all safety procedures as required in a specific operation. Identifies safety concerns and takes appropriate action
  • Willingly shares skills and knowledge. Effectively gives and receives feedback
  • Cooperatively performs additional duties as assigned
  • Maintains good safety, attendance, and performance records
  • Demonstrates ability to obtain the appropriate qualifications as needed
  • Is able to read, interpret, and follow written, visual, and verbal work instructions
214

Welder Resume Examples & Samples

  • 8 year of experience in performing welding processes
  • Under direct supervision, performs simple, basic welding application
  • Understanding of the performance of visual and in-process inspections in accordance with API and ISO quality specifications
  • Supports the team and team's objectives
215

Welder Resume Examples & Samples

  • Proficient in production aluminum MIG and TIG welding
  • Interpretation of mechanical drawings, including weld requirement
  • Knowledge of wire and filler materials applications for aluminum
  • Conventional and precision measuring instruments
  • Process inspection, certification, and documentation
  • Welding equipment maintenance
  • Safety and Housekeeping
  • Performs related duties as assigned by supervision
216

Welder Resume Examples & Samples

  • Check during assembly for proper weld location and size, proper fit, and operation of sliding or rotating parts
  • Make repairs when necessary
  • Check for weld spatter, burn-thru, and other visible weld defects and remove or repair when necessary
  • May require use of oxyacetylene or plasma arc cutting torches or automatic programmable welder
  • Check completed work per job instructions and print specifications
  • Properly set and adjust all welding parameters to maintain quality welds
  • Also load and assist in welding wire (spool) changes
  • Perform all job set-ups, rework on painted parts, and finished products and must be willing to perform all other operations in the department
  • Perform minor repairs and preventative maintenance of welding equipment and fixtures
  • May be required to record measurements
  • Clean and change torch tips and nozzles, and clean conducts or lines with solvent as required
  • Clean or change helmet lenses as necessary
  • Report labor
  • Move completed parts to designated areas
  • Move stock to and from workstations, stock racks and holding areas
  • May be required to rack and unrack parts
  • Responsible for schedule adherence, safety, housekeeping, rejects, and productivity applicable per Standard Operation Procedures (SOP's)
  • Responsible for both quality and quantity of work
  • Participate in team activities and problem solving sessions as required
  • Communicate problems and/or solutions to appropriate person
  • Must follow all processes and procedures as written
  • As needed, document and/or chart production data to aid in problem identification, quality feedback and production scheduling
  • Troubleshoot problems when necessary
  • Train, instruct, and assist other operators in their duties as required to ensure a quality product and smooth flow
  • Evaluate defective material and tooling, faulty operations, questionable conditions and potential work stoppages; advise and recommend alternatives to appropriate person. (May require the use of computer and telecommunication device.)
  • Ensure that work area and equipment are maintained in a clean, orderly, and safe condition
  • The above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned. The inclusion of which would be in conformity with the factor degrees assigned to this job
  • This job has no supervisory responsibilities
  • Must pass Weld test. Successfully complete GMAW School
  • High School Diploma or (GED) General Education Degree (effective 1997)
217

Welder Resume Examples & Samples

  • Operate robotic welder using wire welding GMAW (Gas Metal Arc Welding) and GMAW-P (Pulsed Gas Metal Arc Welding)
  • Perform manual welding using wire welding GMAW (Gas Metal Arc Welding), GMAW-P (Pulsed Gas Metal Arc Welding), or GTAW (Gas Tungsten Arc Welding)
  • Work includes set-up and loading fixtures into weld robot, manual welding as needed, to perform final weld out of tacked weldments
  • Operate and/or use related equipment and tools which include, but not limited to, forklifts, overhead crane and rigging, grinders, hand tools, measurement equipment, and Air Arc
  • Perform preventive maintenance requirements as needed to keep equipment operational; perform daily safety and operational checks; follow manufacturer instructions and governing regulations
  • Read, understand, and follow product prints, work instructions, order requirements, and general procedures
  • Acquire and maintain welding certifications as required
  • Maintain a safe and clean working environment, complying with all procedures and facility rules/guidelines
  • Additional projects, tasks, and/or assignments as assigned
218

Welder Resume Examples & Samples

  • Actively participate in safety meetings, pre-task risk assessment and safe work procedure planning
  • Demonstrate strong safety practices that include lockout/tag out and work area cleanliness
  • Produce high quality, dependable repairs, safely every shift, and take on additional responsibility with minimal supervision
  • Must complete field service reports, legibly, accurately and in a timely manner
  • Ability to read prints, lay-out and fabricate parts, develop specifications from general descriptions and draw sketches of parts or products for fabrication
  • Operate various types of shop and field equipment such as service trucks, floor sweepers, bobcat loaders, forklifts, overhead cranes, welding and cutting equipment, and hydraulic press equipment
  • Minimum 3 years’ experience in welding
  • Must have a strong working knowledge of welding procedures, techniques, processes, and proper repair methods for various types of equipment
  • High School diploma / GED
  • Associates Degree in Welding Technology or similar field (preferred)
  • CDL License (preferred)
  • Excellent written and verbal skills with; crews, supervisors, managers, coordinators, production, vendors and inspectors, providing task completion and pass-on information
  • Must be a self-starter; work well with teams as well as independently
  • Demonstrate good decision making skills and the ability to prioritize work
  • Consistently display positive behaviors that support Cloud Peak Energy’s goals and objectives
219

Welder Resume Examples & Samples

  • Make necessary repairs and changes in the pump room, engine room, living quarters, and the drilling floor and derrick structure itself
  • Repair and install handrails, stairways, walkways, and ladders
  • Repair water and mud tanks
  • Make repairs on the drill floor, heliport, or to the drilling rig structure itself
  • Secure padeyes throughout the rig as needed to assist in the safe moving of heavy equipment
  • Build special devices, projects and structures to meet the needs of the drilling rig
  • One year experience assigned to a Mobile Offshore Drilling Unit with experience in the welding and torch cutting to repair and replacement of structural and support devices preferred
  • Must have or have the ability to obtain a 6-G Welding Certification
  • STOP program for Supervisors
220

Welder Resume Examples & Samples

  • Ability to safely and effectively use high-speed pneumatic power tools (drills, drivers, rivet guns, etc.), hand tools, and bulky steel rivet buckers and mallets
  • Boat hulls are an aluminum riveted component parts product; employees must be able to effectively drill, rivet, and buck rivets in all positions (sitting, kneeling, and standing) while maintaining safe and effective control of high-speed pneumatic tools and steel rivet buckers
  • Complete required documentation of finished hulls and parts for production purposes
  • Daily job duties will be varied and dynamic
  • Ability to perform job functions safely and effectively in a fast-paced, noisy environment while wearing all required PPE (including; eye, hearing, hand, knee, foot, etc.)
  • Three months experience in a manufacturing setting preferred
  • Detailed and organized person
  • Computer skills preferred
  • Knowledge of 5S, Kaizen and LSS a plus
  • Ability to effectively communicate, train, and perform all required job functions with a work partner while in close proximity with other co-workers
  • Possess a positive work attitude, willingness to learn all departmental job functions, and adhere to safety and quality requirements
221

Welder Resume Examples & Samples

  • High School graduate or GED preferred
  • Experienced with mig and flux-cord welding
  • Proficient in reading and fit-up weldments to structural blue prints
  • Experienced with standard shop tools and safety practices
222

Welder Resume Examples & Samples

  • Certified pressure pipe welder
  • Ability to read tape measure, operate a sit down lift, and weld with MIG
  • Ability to handle tools and solid materials
223

Welder Resume Examples & Samples

  • Hand welds various fittings to different sizes of pipes and welding joints
  • Interprets application job sheets and various sizes of welding fittings
  • Analyzes all welds to ensure they are free of porosity and discontinuities
  • Ensures all welds are visibly stamped or identified with markings to designate that welds were performed by a certified welder
  • Sorts piping per job and sorts line numbers per fabrication job
  • Reviews the order ticket and determines the work to be performed meets the customer's specifications
  • Verifies the final product meets quality control standards
  • Must pass the Drug Test
  • Must pass the Background Check
  • HS Diploma or GED, strongly preferred . 0-2 years of experience in area of responsibility
224

Welder Resume Examples & Samples

  • Minimum of 2 years of experience
  • Able to work in hot/cold conditions
  • Capable of working around heavy equipment, toxic fumes, solvents, etc
  • Able to work in all weather conditions and environment
  • Ability to climb, bend, stoop, kneel, extend as needed to perform job
  • Ability to lift and carry up to 50 pounds
225

Welder Resume Examples & Samples

  • Perform flat and vertical welds in a commendable manner
  • Perform horizontal and overhead welds in a satisfactory manner
  • Read and understand blueprints
  • Assist Lead Welder in assigned stall to effectively and efficiently meet production needs
  • Perform minimal assembly procedures successfully
  • Operates over-head and jib cranes safely and efficiently
  • Follows all safety procedures and regulations
  • 1st Shift-6am-4:30 pm- $17.59/hour
  • 2nd Shift- 4:10 pm to 2:40 am- $19.70/hour
226

Welder Resume Examples & Samples

  • Must be able to follow established methods and procedures and perform work accordingly
  • Must have the ability to work rapidly and under time pressure for extended periods of time in order to meet build requirements
  • Must possess the ability to read build sheets and blueprints
  • < 10% Travel
227

Welder Resume Examples & Samples

  • Maintain, repair, troubleshoot, install and apply preventative maintenance systems on a wide variety of equipment
  • Ability to read and interpret mechanical drawings and blueprints
  • Hoisting and rigging
  • Perform scheduled preventative and breakdown maintenance work
  • Consult manufacturer’s manuals to determine maintenance procedures
  • Must possess Alberta-journeyperson welder certification/ Red Seal or equivalent
  • Experience with arc welding (SMAW), wire feed welding (GMAW)
  • Fabrication experience would be an asset
  • Minimum of 3-5 years’ experience in heavy industrial/ manufacturing environment
  • Experience with process equipment would be and asset (i.e. jaw crusher, cone crushers, screens, etc.)
  • Must have proven safety record and history of being a team player
  • Must be reliable and committed to the job
228

Welder Resume Examples & Samples

  • 2 years experience (preferred) in Gas Medal Arc Welding (GMAW) and pass AWS/Terex welding certification test
  • Pass welding entry exam
  • Ability to handle large weldment assemblies
  • Experience in layout of complex weldments without the aid of fixtures
  • Strong orientation toward quality, safety, and continuous improvement
  • Works under general shop conditions, which include: standing, walking, sitting, and lifting
  • Will be exposed to some or all of the following working conditions: inside, outside, heat and cold, noise and atmospheric conditions
229

Welder Resume Examples & Samples

  • 3-4 years related welding experience
  • Demonstrate ability on surface finish preparation
  • Demonstrate ability on acetylene/oxi torch and arc gouging process
  • Ability to train welders in SMAW and SAW welding process
  • Qualified and certified in SMAW, FCAW, SAW (Carbon Steel and overlay) and GTAW (TIG) welding procedures
  • Able to troubleshoot and correct weld defects and equipment malfunctions
  • Proficient in properly aligning parts and machine settings for SAW weld process
  • Proficient in producing volumetric (NDE) quality welds
  • Proficient in overhead crane operations
  • Proficient in reading and comprehending WPS, routings and weld data sheets
  • Proficient in reading and comprehending complex weld diagrams and machining diagrams
  • Proficient with post welding heat treat furnace, setting up resistance stress (localized stress) and completing related paperwork
  • Formal technical education in welding
  • Green Belt training, level I and II
230

Welder Resume Examples & Samples

  • Interpret blueprints, sketches or other specifications
  • Lays out and sets up work, determines operational sequence and devises suitable jigs or fixtures
  • Select welding rod of appropriate size and composition and selects proper equipment and settings
  • Preforms fabrication
  • Performs inspection of weldments to ensure world-class quality
  • Capable of operating flame cutter as required
231

Welder Resume Examples & Samples

  • Handle materials and tools, set-up complete appropriate weld processes and inspect all welds and products to assure weld specifications are met
  • Perform safety checks and preventative maintenance on welding equipment to assure good, safe working conditions and complete daily forms
  • Overtime as required/requested
  • Inspect all welds to assure each meets quality standards, troubleshoot problems and make adjustments as required
  • Assist other employees in cell group when welding is not required
  • Clean welding station and maintain neatness in the surrounding work areas
  • Assist in the implementation of Lean Principles
  • Knowledge and skills of welding processes such as Mig and Tig
  • Ability to set up welder, apply appropriate weld process, inspect weld and make necessary adjustments
  • Ability to read and understand work orders, directions, charts, forms and safety regulations
232

Welder Resume Examples & Samples

  • Set the welding equipment according to specification/setting up of welding jobs
  • Perform difficult welding
  • Perform quality checks and check the surface geometry visually and with measurement tools. When there are critical variations, coordinate corrective measures with the appropriate departments
  • Assist in the organization of teamwork
  • Participate in the Continuous Improvement Program
  • Must either currently possess or have the ability to acquire an AWS D1.1 GMAW 4G certification
  • Experience with manual CMT welding
  • Experience welding in a manufacturing setting
  • CMT (Cold Metal Transfer) and spot welding experience is a plus
  • Candidates should have extensive GMAW/spot welding sheet metal steel experience
233

Welder Resume Examples & Samples

  • Weld metal and other components to fabricate or repair products : Material SS316L, SS316TI, Monel 400, Duplex , HastelloyC276
  • Welding and Helium leak check, Oil Fill
  • Calibration and Testing of Pressure Transmitters & Differential Pressure Transmitter
  • Handling of Calibration Reference Instruments,
  • Issuing certificates – Calibration certificates 3.1 according to EN10204, certificates of Compliance 2.2, Hydtrotest certificates 2.2, certificates of IP65, Material test certificates 2.2
  • Repairing pressure tx , span & linearity adjustment of tx
  • Testing IP65 of gauges & case filling glycerin & silicon
  • Diaphragm Seal with Pressure Gauges & Pressure Transmitters Filling
  • High School Diploma or General Equivalency Degree (GED)
  • Knowledge of Welding standards
  • Ability to attain Rosemount Inc. soldering/brazing/welding certification
  • Ability to work from approved drawings and procedures
  • Ability to understand ASME standards
  • 5 to 7 years of experience in Manufacturing Welding Environment & Service and Exposure
  • ISO 9001 quality management system, Kanban, 5S and DMAIC problem solving process
  • Specialised in Welding and knowledge of metal & welding process is a must
  • Good English communication and presentation skills for interaction with customers
  • Good in documentation and writing
234

Welder Resume Examples & Samples

  • Six (6) months experience in manual and/or semi-automatic welding processes or are currently participating in the Eastern Workforce Investment Board Welding Program is required
  • Must be able to work all shifts and in all environments as well as Radiological areas of the boat
  • Willing to accept road jobs assignments
  • Consideration to be given to MTC employees on layoff status
235

Welder Resume Examples & Samples

  • MIG and TIG weld steel, aluminum and stainless steel components based on the specifications of the blueprints and/or drawings
  • Operate machinery used in the production process, or assist machine operators
  • Comply with all company safety policies and procedures
  • Be authorized to work in U.S
  • Be able to start immediately
  • Pass a drug test
236

Welder Resume Examples & Samples

  • TIG and MIG welding on pressurized pipe
  • TIG and MIG welding
  • Ability to read pressurized pipe schematics
  • 1+ year of experience TIG and MIG welding.(i.e. JohnSmithResume.pdf or JohnSmithResume.doc)
237

Welder Resume Examples & Samples

  • Strikes arc and manually guides electrode or gun along weld line to form specified depth of fusion and bead
  • Runs spot welder as needed ensuring proper tips are used
  • Nsure spot welder tacks are secure and uniform without dimpling opposite surface
  • Use side grinder to clean up all grinding splatter and ensuring quality surfaces near weld zone
  • Required to correctly identify and label parts for their specific area with correct quantity and location
  • Assists in the instruction and training of others as requested by supervisor
  • Perform other non-essential duties as assigned by management
  • High School Diploma/GED or equivalent experience
  • Must have welding experience and/or a weld certificate
238

Welder Resume Examples & Samples

  • High School Grad or GED Required
  • At least 2 years of responsible metal fabrication experience
  • Sanitary / purge welding experience with stainless steel, light gauge materials highly preferred
  • Operate equipment used in welding and metal fabrication including band saws, grinders, break, shear, drill press, chop saw, plasma cutter etc
  • Planning and managing assigned projects
  • Preparing and maintaining accurate records
  • Adhering to safety practices
  • TIG, MIG, Purge Welding, and Brazing
  • Ability to visualize a project from start to finish
  • Use of all metal working equipment
  • Mechanical systems – air, hydraulic
  • The plant environment will include wet or humid conditions (non-weather related), extreme cold and heat (non-weather related), working near moving mechanical parts, exposure to fumes or airborne particles, and chemicals
239

Welder Resume Examples & Samples

  • Selects equipment and plans layout, assembly, fit-up, and welding
  • Sets up equipment and welds parts, using GTAW (TIG) or GMAW (MIG) processes hand welding equipment
  • Selects welding filler metals per drawing/specification
  • Repairs products by dismantling, straightening and reassembling parts
  • Observes all company policies, works shift work, and is consistently at work on time
  • Performs other tasks as assigned
  • High school degree or equivalent
  • 5 yrs. Manual GTAW & GMAW welding experience
  • Able to read blueprints, bill of materials, filler metal specifications and welding symbols
  • ASME & PED experience desirable
  • Hand welding certification from a technical school a plus
  • Stainless steel and Nickel experience a plus
  • Able to lift up to 60 pounds
  • Experience with automated and or robotic welding a plus
240

Welder Resume Examples & Samples

  • Assist in the construction, maintenance, operations, and repairs of pipelines and associated facilities and equipment
  • Read and understand station flow and pipeline alignment drawings
  • Responsible for the accurate measurement and sampling of crude oils, products, and natural gas liquids
  • Performs duties in compliance with applicable codes and regulations (API, DOT, etc.)
  • Perform to highest safety standards, including reporting all incidents and discrepancies
  • Performs layout work and pipeline related fabrication
  • Set up equipment and pipeline for inspection, testing, and measurement
  • Trains and guides others to learn the duties of a welder
  • Utilizes destructive and non-destructive testing procedures (radiographic interpretation, ultrasonic testing (UT), dye-penetrant, magnetic particle, etc.)
241

Welder Resume Examples & Samples

  • Demonstrated experience and abilities in trade; MIG/TIG welding experience
  • Demonstrated proficiency in shop mathematics
  • Good planning and organizational skills with an aptitude for project leadership
  • Team player with excellent listening and communication skills
  • Record of personal safety
  • Willingness and ability to travel to other McKee plants and facilities with overtime, other shifts and weekends as required
  • Ability to regularly lift and/or move up to 50 lbs
  • LTO License or ability to acquire one
  • Valid driver’s license and good driving record to operate a company vehicle (Applicants who are interviewed will need to bring an MVR, unless they are already currently approved to drive a company vehicle)
  • Willingness to work within McKee Foods’ guiding values, goals and objectives
  • On-the-job training and/or equivalent vocational-technical training
  • Good Computer knowledge and associated skills
  • Experience working in a plant food-processing environment; pipe fitting and welding experience in food grade pipe
  • Experience with crane rigging and setting heavy equipment
  • Proficient MIG/TIG/STICK welding skills
  • Interest in continual personal growth and development
242

Welder Resume Examples & Samples

  • Six months previous experience welding in a manufacturing or fabrication environment
  • 1 year of previous experience welding in an assembly environment
  • 1 year of [previous experience welding in a manufacturing or fabrication environment
243

Welder Resume Examples & Samples

  • 5+ years of experience in the field of welding
  • 5+ years reading blue prints
  • Good Oral and written communication
  • Strong Computer skills
  • Strong Leadership Skills
  • Must pass internal welding tests
244

Welder Resume Examples & Samples

  • 75%
  • 15%
  • Associates Degree or Technical Degree preferred
  • Previous welding experience in Oil/Gas industry
  • API knowledge preferred
  • Ability to wear all Personal Protective Equipment (PPE) as required
  • Ability to thrive in a fast paced, high volume production environment
  • Knowledge with Preventive Maintenance for basic machines
  • Ability to repair/maintain equipment within a certain scope of work
  • Ability to work independently or in a team
  • Takes initiative and is self-motivated
245

Welder Resume Examples & Samples

  • Job Safety Analysis (JSA) - review and creation of JSA's
  • Hot tap high pressure pipelines
  • Assist crew on other activities as needed in order to support work
  • Knowledge of with labor, safety, and environmental regulations
  • Ability to work with a computer and interface with management systems for expense reparation, timesheet reporting, and e-mail
  • Minimum 4+ years’ experience in pipeline construction or related field
  • Post-secondary education in a related field or a welding certificate would be an asset
  • This position is overtime eligible and may require extended work hours including an 8-6 work schedule, 8 days on and 6 days
  • Significant overnight travel required primarily to various states off
  • Successfully complete a pre-employment medical screening, including drug and alcohol testing
246

Welder Resume Examples & Samples

  • Using MIG and/or TIG, weld components together according to blueprints and job traveler
  • Check and verify part numbers prior to assembly of product to customer specifications
  • Accurately measure and lay out locations for welded components
  • Adjust weld as needed to accommodate varying thicknesses of steel
  • Reads and accurately interprets blueprints at an advanced level
  • Able to learn operations of multiple jigs/fixtures within a job area and must be able to regularly rotate jobs to meet schedules
  • Skill level includes MIG, TIG and pipe welding capabilities as outlined in attached level breakdown
  • Must work at a reasonable pace (measured by production efficiency) and within quality standards to insure timely completion
  • Able to follow directions and perform repetitive tasks
  • Ability to understand and carry out detailed written and oral instructions
  • 2-4 years previous welding experience with non-structural components
  • Must successfully complete in-house welding test
247

Welder Resume Examples & Samples

  • Minimum High School/ Professional Technical Degree, preferably in Welding
  • Shielded metal arc welding (SMAW)
  • Gas tungsten arc welding (GTAW) and Gasmetal arc welding (GMAW) - theoretical knowledge and work experience of minimum five (5) years
  • Work experience in heavy manufacturing or oilfield equipment
  • Technical understanding of the overall manufacturing and quality processes
  • PC Skills (CNC Operating Programs, Word, Excel)
  • Authorization: According ASME Code Sect. IX or EN 287/1 or ISCIR CR9/1
248

Welder Resume Examples & Samples

  • Responsible to rebuild and ongoing welding maintenance repairs to all mining and support equipment
  • Read and interpret plans or quotations or welding process specifications
  • Operate manual or partially manual welding equipment for metallic segments fusion using different processes such as GTAW (tungsten), GMAW (metal), FAW (cast iron), PAW (plasma), SMAW (shielded metal) and strength weld
  • Operate manual or semi-automatic cutting and welding equipment
  • Operate metal hewing machinery such as crushers, shears, and any other equipment used to straighten or cut metal
  • Carry-out any required mechanical work in order to perform his tasks
  • Use and maintain the welding waste disposal system
  • Maintain a clean and safe work environment
  • Report all incident or accident to supervisor
  • Perform other duties as required
  • Hold a professional diploma in welding or equivalent
  • Must have minimum of three (3) years’ experience in industrial welding environment with a working knowledge of manuals, and schematics is expected
  • Inter-Provincial (Red Seal) Certification and High Pressure Certification are an asset
  • WBC Certification is mandatory
  • Have thorough understanding repair and fabrication techniques
  • Mining Modules Required for the position
249

Welder Resume Examples & Samples

  • Applies appropriate welding processes to join, surface, fabricate, and repair parts of metal or other materials
  • Works according to layouts, work orders, blueprints, schematics and sketches using manual, automatic, and/or semi-automatic welding equipment; may need to lay out and mark weld points on parts or sub-assemblies of some materials; may also need to position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools
  • Inspects completed work for conformance to specifications
250

Welder Resume Examples & Samples

  • Confer with technical and supervisory personnel to establish that a termination activities plan is carried out according to procedures
  • Be able to interpret general assembly and preparation drawings for termination
  • Inspect equipment and parts for deviations prior to assembly
  • Abide by all safety, quality, and environmental requirements
  • Have thorough knowledge of the construction and function of the umbilical termination assembly
  • Ability and understanding on how to run the various welding machines used in the welding process used for welding of small bore super duplex tubing
  • Able to make adjustments to welding parameters in accordance to welding procedures
  • Day to day maintenance and inspection of the umbilical welding equipment
  • Monitor and document day to day operations of the termination work
  • Operate a forklift and overhead crane
  • Uses appropriate tools and extreme caution when preparing the umbilical for termination
  • Be able to do the welding using FCAW, GTAW, SMAW and SAW welding processes
  • Responsible for knowing and understanding the procedures and other relevant activities associated with the preparation (shielding/back gas, beveling, wall thickness, positioning etc.), welding (WPS- welding procedure specifications, welding qualifications acc. To ASME IX/ AWS D1.1), and welding inspection
  • Subject to both environmental conditions. Activities occur both inside and outside
  • The termination operator/welder is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, and exposure to high heat
  • Cleans work area once per shift or as required to meet safety requirements
  • Ability to occasionally lift up to 50 pounds
  • 3-5 years experience in mechanized welding in a manufacturing environment is required to fulfill this position. Experience can include but not be limited to; operating/working around heavy production equipment and/or chemical processes, millwright, pipe fitter, welding, control room operator, active participation in safety/quality initiatives. Must have orbital weld experience