Sheet Metal Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the sheet metal job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

  • Craft your perfect resume by picking job responsibilities written by professional recruiters

  • Pick from the thousands of curated job responsibilities used by the leading companies

  • Tailor your resume by selecting wording that best fits for each job you apply

LB
L Bahringer
Liliane
Bahringer
176 Darrel Mission
Boston
MA
+1 (555) 493 5031
176 Darrel Mission
Boston
MA
Phone
p +1 (555) 493 5031
Experience Experience
12/2015 present
Phoenix, AZ
Stamping Sheet Metal Team Leader
Phoenix, AZ
Stamping Sheet Metal Team Leader
12/2015 present
Phoenix, AZ
Stamping Sheet Metal Team Leader
12/2015 present
  • Operate as a key contributor to the team to set standard work, audit standard work, and improve standard work while problem solving and tracking MDI
  • Actively support Lean concepts such as 9 step problem solving, participating with RIE’s, value stream mapping, 5-S, and material inventory control methods, etc
  • Provide coaching, direction, and guidance to employees in regarding non-conformance to standard work (including, but not limited to, productivity, quality, housekeeping, and safety)
  • Provide feedback on employee and/or team performance to the supervisor and/or manager
  • Perform safety, quality, standard work, and housekeeping audits
  • Performs other duties as assigned by manager
  • Support management decisions and effectively communicate decisions with team
06/2010 08/2015
New York, NY
Sheet Metal Shopman
New York, NY
Sheet Metal Shopman
06/2010 08/2015
New York, NY
Sheet Metal Shopman
06/2010 08/2015
  • Performs pre-painting and wiring preparation by cleaning and labeling of parts
  • Performs other functions as necessary or as assigned
  • Performs duties to ensure department meets expectations and deadlines
  • Performs preventative maintenance and minor repairs to sheet metal department equipment
  • Touches up paint and performs detail of signs
  • Reviews plans and diagrams to ensure accuracy of cutting of materials to create sign parts
  • Keeps shop area clean and free from debris to maintain a safe working environment
02/2003 01/2010
Los Angeles, CA
Sheet Metal B
Los Angeles, CA
Sheet Metal B
02/2003 01/2010
Los Angeles, CA
Sheet Metal B
02/2003 01/2010
  • Sets up and performs maintenance on fab and machine shop machines and performs burning work
  • Performs minor machine maintenance such as oiling machines, dies, or work-pieces
  • Performs minor machine maintenance such as oiling machines, dies, or workpieces
  • Positions work-piece against stops or aligns layout marks with die or blade
  • Removes burrs, sharp edges, rust, or scale from workpiece
  • Performs related duties as assigned by supervision
  • Positions workpiece against stops or aligns layout marks with die or blade
Education Education
Bachelor’s Degree in Difficulty
Bachelor’s Degree in Difficulty
Loyola Marymount University
Bachelor’s Degree in Difficulty
Skills Skills
  • Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation
  • Solid knowledge and understanding of system operation, building plans and working drawings
  • 401(k) profit-sharing savings plan
  • High standard of integrity and professionalism
  • Short-term disability
  • Dental and vision plan
  • Health insurance
  • Vacation Pay
  • Prescription drug plan
  • Life insurance
Create a Resume
1

Sheet Metal B Resume Examples & Samples

  • Operates Fab Shop and Machine Shop machinery and equipment. Reads job specifications to determine machine adjustments and material requirements
  • Fully analyzes all required blueprints, drawings, work orders and sketches in order to fabricate and install desired product or part. Is able to detect errors and correct through proper departmental channels
  • Sets stops or guides to specified length as indicated by scale, rule or template
  • Positions workpiece against stops or aligns layout marks with die or blade
  • Pushes button or depresses pedal to activate machine
  • Observes machine operation to detect workpiece defects or machine malfunction
  • Measures workpiece dimensions to determine accuracy of machine operation
  • Removes burrs, sharp edges, rust, or scale from workpiece
  • Performs minor machine maintenance such as oiling machines, dies, or workpieces
  • Sets up and performs maintenance on fab and machine shop machines and performs burning work
  • Operates any equipment needed to perform job,
2

Sheet Metal Specialist Resume Examples & Samples

  • Checks existing inventories or reworks templates in order to make special or duplicate parts
  • Produces and assembles prototype or small production run parts
  • Operates a variety of hand or machine tools and equipment including shears, brakes punches notchers and presses
  • Works from blueprints, assembly drawings, sketches and verbal instructions to fabricate complex sheet metal parts where tolerances are difficult to acquire and maintain
  • Reviews computerized programming for, or develops pattern indicating shape and dimensions of part to be formed or machined. Reads and interprets design specification and creates a template or ensures that bends, cuts, angles, radii, holes etc. are in proper alignment with each other and will match in assembled units
  • Makes complex measurements and uses advanced arithmetic calculations paying particular attention to bend allowances which must be thoroughly understood in relation to various types and thickness of metals being formed
  • Determines number of shearing operations required to fabricate parts, plans and sequence of operations to be followed, and may set up machinery for lower level personnel
3

Production Team Leader Sheet Metal nd Shift Resume Examples & Samples

  • Communicate business needs and direction through the proper chain of command
  • Evaluate and coach for performance improvement to meet key performance indicators to ensure targets are met
  • Cross-training and development of workforce to meet flexible business needs
  • Sheet metal experience a must
  • Ability to demonstrate problem solving skills effectively
4

Production Team Leader Sheet Metal st Shift Resume Examples & Samples

  • Manage and maintain manpower needs and drive training initiatives to close gaps in flexibility to meet customer demand
  • Lead problem solving activities with implementation of process changes within processes in the group
  • Ensure all tools and PPE are available to employees and enforce the adherence of company policies
  • Communicate with a sense of urgency through the proper chain of command
  • Possess the ability to lead and facilitate teams
  • Must possess the ability to effectively communicate verbally as well as written
  • Basic computer skills needed. (Including the ability to send e-mail)
5

Sheet Metal Fabrctr A BE Hunt Resume Examples & Samples

  • Assembly of sheet metal to fabricate parts and complete units may include some or all of these processes -drilling, deburring, shearing, rolling, forming, punching, fitting, insulating, welding and soldering
  • Setup and adjust machines and dies including selecting the proper equipment for the part required
  • Inspect parts for accuracy and conformance to quality standards
  • Maintain production records and scrap paperwork
6

Sheet Metal Production Group Leader Resume Examples & Samples

  • Supervise the activities of the production floor and follows all established safety, administrative and work procedures
  • Prepare assembly/production area by adhering to all standard work instructions
  • Verify parts by comparing provided parts list with part description in standard work documentation
  • Assure materials, fixtures and specifications for the products to be built are at the work stations in advance of the build cycle
  • Execute production plans set forth by the supervisor while ensuring that all quality, yield and delivery goals are maintained
  • Consult with the manager to assess training needs and develop programs to match these needs. Continually evaluate procedures to monitor and analyze training effectiveness and update methods as needed
  • Responsible for workstation cleanliness and chemical labeling on workstations including the GHS hazard rating, expiration date and chemical name. Ensure operators are abiding by these guidelines
  • Group leader will work on the production line as required
  • Receive and answer questions and solve issues and problems pertaining to production processes or equipment operation
  • Work with Supervisor to determine employee and factory capacity for each work day
  • Ensure proper methods of handling rejected material on the floor and retrieve additional production material as needed from stockroom
7

Sheet Metal Fabrication Set Up / Operator Resume Examples & Samples

  • Participate in required instruction and training to become familiar with DFT (Demand Flow Technology) and its application at Nortek Global HVAC
  • Perform all inspection, set-up, and operation activities in conformance with Operational Method Sheets and pre-flight inspection forms
  • Operate equipment in production capacity meeting and/or exceeding all safety and efficiency standards
  • Inspect finished pieces for quality following company defined quality inspection criteria
  • Perform all required company defined safety inspections prior to equipment set up and operation
  • Assist maintenance personnel in troubleshooting problems or during trial operations
  • Maintain good housekeeping and safe work environments around workstation
  • Accurately complete and maintain production and quality check reporting forms
  • Perform other duties as assigned to maintain production efficiency and meet plant/department operational needs
  • While performing the duties of this job, the employee is regularly required to stand, walk, stoop and crouch, push, reach, grasp, and hear
  • Generally light physical demand. The employee is required to move or lift items weighing 5 to 25 pounds and less than one hundred frequently. Materials weighing 1 to 5 pounds, 25 to 60 pounds and over 60 pounds are rarely handled. The employee uses his/her hands frequently to move materials along conveyors. Hand trucks, tow motors, forklifts and hoists are rarely used
  • Specific vision abilities required by this job include depth perception, clarity of vision at a distance of 20 feet or more, and the ability to identify and distinguish colors
  • Ability to read, write and apply common sense understanding to carry out instruction furnished in written and oral form
  • Ability to identify the source of problems and appropriate solutions (troubleshoot)
8

CVJ SQC Bearing Comp & Sheet Metal Resume Examples & Samples

  • Responsible to manage the Suppliers Quality performance for an assigned commodity
  • Work in close co-operation with, Central CVJ Purchasing Director, Commodity Purchasing Managers and SQAs
  • Responsible of the CIP for his suppliers portfolio
  • BS degree in Mechanical or Automotive engineering
  • Over than 7 years SQC experience in auto industry
  • Good communication in English
9

Production Sheet Metal Operator Resume Examples & Samples

  • Follows all company and work center specific production, administration and safety policies and procedures. Attends and actively participates in all required training
  • Reviews manufacturing planning, part-specific engineering information, set-up information and/or related instructions to understand appropriate work process and quality requirements for completed product
  • For machine dependent operations, selects proper tooling, programs and edits to machines (i.e. set-up machine) and starts and observes machine operation during first part production to detect malfunctions or out-of-tolerance conditions. Adjusts machine controls or other control media as required. Depending upon work center assignment, the operator will set-up and operate but not limited to one or more of the following machines: roll form, turret, brake press, hyrdopress and drill press
  • Uses gauges, scales, calipers, mylars and/or blueprints, customer tools and other measuring equipment to check first part quality. Obtains first part for buy-off from lead person, supervisor, quality control inspector and/or second team member. Upon buy-off, completes production run for the manufacturing planning operation. Performs 100% inspection of all parts, subsequent to first part buy-off, and completes requirements of applicable statistical process control plans. Where available, uses target times to evaluate timely completion of work. Notifies lead person or supervisor about substantive discrepancies between manufacturing planning target time and actual set-up and/or run times
  • Responsible for minor machine maintenance and maintaining proper alignment and condition of machine
  • Completes required documentation, including but not limited to: manufacturing planning operation buy-off, recording of accurate part counts, labor card entry, set-up information, special notes, data collection plans, tie-in information and recording the disposition of non-conforming material. Tears down machine or hand tool set-up upon completion of production run, returning all tools, equipment and accessories to their proper locations. Moves complete part order to next manufacturing operation or staging area
  • Works with others, using continuous process improvement tools and techniques and just-in-time manufacturing techniques, to develop and install process improvements that positively impact manufacturing through-put, machine and human resources utilization, space utilization, organization and other factors. Assists to incorporate process improvements into document instructions
  • Actively participates in work center and cross-functional process improvement teams by attending team meetings, completing action items, encouraging complete and respectful discussion and understanding of goals, alternatives and solutions
  • Work in a fast paced environment with fast changing priorities, providing a high level of attention to detail and focus on a given task and keeping work area clean and organized
  • Complete other duties as assigned by the management team including working as needed in various other positions to support work flow and to fill in for other team members
  • Three to six months related experience and/or training; or equivalent combination of education and experience. Solid background working with sheet metal
  • Knowledge of punching process and punch tooling
  • Knowledge of roll forming of sheet metal
  • Ability to read blueprints
  • Knowledge of brake forming and hand forming a plus
  • Ability to work with a variety of hand tools including angle grinders, drills and polishers
  • Proven measurement and mathematical fraction/decimal conversion skills
  • Ability to distinguish material types including Aluminum, Steel, Stainless Steel, Copper and Brass
  • Demonstrated decision-making ability utilizing good judgment in determining the appropriate guideline, procedure, and application to utilize in solving problems
  • Understanding of process flows, lead times and lean principles in a “manufacturing environment”, preferably in the aerospace industry
  • Flexible schedule is required; this position requires some weekend work
  • Candidate has to be a strong team player and be reliable
  • Knowledge of safe lifting techniques
10

Sheet Metal Lead-prudhoe Bay, Alaska Resume Examples & Samples

  • Fabricate, assemble, install and maintain various insulation and sheet metal products such as foam, rigid foam, blanket or batt on pipes, vessels, valves, machinery or electrical equipment
  • Fabricate or modify prefabricated insulation kits for special purposes, such as valves, pipefittings, rotating equipment, shaping or forming foam, or cutting and forming sheet-metal jackets to conform to specifications
  • Fabricate, assemble, handle, install, dismantle, and perform adjustment, alteration and repair of all sheet-metal, including flashing and air-handling systems
  • Read and interpret drawings and specifications as they pertain to insulation or sheet-metal
  • Repair boiler refractory
  • Perform all phases of advanced cutting, fitting, and installation of sheet-metal, including soldering, brazing and spot welding
  • Perform preventive maintenance, troubleshooting and minor repairs on shop equipment
  • Assess materials required for sheet-metal / insulation work to be performed
  • Perform detailed fabrication layout of job scope
  • May be responsible for complete execution of work orders for specific jobs
  • Serve as on-site single point of contact for work crew
  • Supervise and/or direct other craftsmen
  • Provide coaching, mentoring and performance feedback to crew members
  • Ensure all team members understand and follow procedures and assess skill level of team members; assist in skill development
  • Examine work and materials for compliance with specifications
  • May be responsible for recording and reporting daily labor hours to timekeeper
  • Routinely perform safety and productivity observations as well as shop, field and vehicle inspections
  • Attend various technical, developmental and safety training
  • Demonstrate adherence to established safety policies and procedures and accept accountability for safe work practices
  • Demonstrate support for the company’s environmental management system
  • Knowledge of insulation/sheet-metal techniques and procedures
  • Knowledge of various insulation and sheet-metal products, such as foam, rigid foam, blanket or batt on pipes, vessels, valves, machinery or electrical equipment
  • Knowledge of the proper use and care for the tools and equipment commonly employed on an industrial job, such as bending brakes, band saws, banding tools, shears, rolls, portable power tools, lockformers, benders and crimpers
  • Knowledge of the various insulation materials, supports, moisture barriers and jackets commonly used to insulate pipe and equipment
  • Thorough knowledge and understanding of the various methods used to install and repair insulation and the components of insulation systems
  • Ability to read and interpret drawings and specifications as they pertain to insulation or sheet-metal
  • Proficiency in the basic skills of cutting, fitting and installing insulation and the components of an insulation system such as lagging and banding
  • Knowledge of boiler refractory repair processes
  • Ability to work as part of a team; communicate effectively with fellow workers and alternate
  • Sound knowledge of operations and safety practices and policies
  • Ability to lead a work crew to accomplish goals and objectives established by management
  • Ability to work effectively without direct supervision
  • Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, reach through low and high ranges and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear
  • Lift 40 lbs. from floor to waist x 5 with a 12 second interval
  • Push Test: Generate horizontally between waist and shoulder level a peak isometric push force of 120 lbs
  • Repetitive Kneel Test: Perform from standing, kneel on one knee, alternate from left to right knee, x 5 each knee
  • Repetitive Squat Test: Perform a functional squat and stand x 5
  • Two (2) years experience in fabrication, assembly, handling, installation, dismantling, adjustment, alteration and repair of all sheet-metal, including flashing and air-handling systems
  • Valid driver’s license and ability to be insured by CH2M insurance provider
11

Sheet Metal B Resume Examples & Samples

  • Fully analyzes all required blueprints, drawings, work orders and sketches in order to fabricate and install desired product or part. Able to detect errors and correct through proper departmental channels
  • Positions work-piece against stops or aligns layout marks with die or blade
  • Observes machine operation to detect work-piece defects or machine malfunction
  • Measures work-piece dimensions to determine accuracy of machine operation
  • Removes burrs, sharp edges, rust, or scale from work-piece
  • Performs minor machine maintenance such as oiling machines, dies, or work-pieces
12

Production Sheet Metal Operator Resume Examples & Samples

  • While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms
  • The employee frequently is required to walk and talk or hear
  • The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch
  • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move more than 75 pounds
  • While performing the duties of this job, the employee is regularly exposed to moving mechanical parts
  • The employee is occasionally exposed to extreme cold (enter a freezer for a short time to pick-up parts), risk of electrical shock, and vibration
  • The noise level in the work environment is usually loud
13

Manager SQC Bearing & Sheet Metal JAK & Ind-cvj Resume Examples & Samples

  • Experienced and recognized as an Expert in metal forging process for automotive commonent
  • Working knowledge of Problem Solving and lean principles
  • Leadership experience in the Supplier or Purchasing environment
  • Familiar with working in International Organization & Overseas experience a plus
  • Results oriented with strong written and oral communications skills
  • Leadership and charisma
14

Sheet Metal Master Resume Examples & Samples

  • 25% This position requires working independently with minimal supervision to investigate sheet metal and roofing trouble call; obtains necessary parts and materials together with tools and equipment and performs required repairs, works with roofing materials to repair roofs and skylights, cleans and seals metal building roofs
  • 25% Works independently with minimal supervision to perform campus wide roofing survey. This involves making critical decisions on the conditions of campus roofs and making recommendations to management as to major roof repair work
  • 10% Fabricates and installs ducts for air handlers and repairs air handlers, installs heating coils in ducts, re insulates ducts, fabricates panels, for air handlers; installs small window units in metal buildings. Reads blueprints when necessary in performing assigned tasks. Fabricates and installs louvers for metal and concrete buildings, builds and installs window and door awnings, installs blowers and exhaust units on roof and wall mounts. Cleans and maintains gutters, downspouts,packs and seals concrete walls that have cracked or need new packing
  • 10% Uses electric an acetylene welding equipment, bending brake forming rolls, squaring shears, elbow machines, bar folder, emery wheels, and power punches. Fabricates, installs and repairs stove pipes, grates, guards, chimney caps, conductor heads and pipes, downspouts, gutters, machine guards, dish-washing sinks, metal roofing ventilators, small incinerators, tanks, window guards and screens, metal hoppers and radiator shields, and boiler stacks
  • 10% Performs other work as requires; including but not limited to providing supervisory assistance to one or more sheet metal mechanics and outside contractors. Directs and trains assigned helpers and apprentices. Assumes supervisory responsibilities in the absence of sheet metal supervisor
  • 10% Operates heavy equipment & machinery (such as large man-lifts, scissor-lifts, fork-lifts & large trucks with trailers)
  • 5% Repairs metal windows, covers metal doors, and repairs other sheet metal equipment. Makes templates by parallel line development , redial line development and triangulation
  • 5% Works in labs to repair fume hoods, fabricates stainless steel pipe, installs acid resistant pipe in high pressure lines or fume hood hookups. Repairs cooling tower by means of sheet metal repairs and rustproofing, weatherproof ducts that are exposed to weather, fabricates and installs pans for air handlers and small units, builds, angle iron frames for mounting exhaust units, and small air units. Fabricates and install s wire strainers in gutters, repairs floor boards in vehicles, repairs lockers, makes funnels and trash cans
15

Production / Sheet Metal Resume Examples & Samples

  • Entry level operator with assistance
  • Is familiar with and works in accordance with the Job Safety Analysis for all tasks performed, follows plant safety/housekeeping rules and procedures. Reports all injuries, near misses or accidents of himself/herself and/or others immediately to supervisor
  • Reports all unsafe condition or action to the Shift Supervisor or Safety Coordinator. Completes plant safety inspection when assigned
  • Disposes of all wastes in a proper manner, reports any environmental incident to the Environmental Coordinator immediately
  • Uses sheet and coil stock metals, rubber, polyethylene foam; rubber based solvent borne adhesives, caulking, and other raw materials as required by the job
  • Is proficient using hand tools that may include: hammer, bulldogs, aviation snips, scissors, paint rollers, caulking guns, and files
  • Operates any or all of the following machines proficiently and on a regular basis: CF machine, press brake, slitter, Gizmo, PVC machine
  • Maintains a clean and orderly workspace on a continuous basis
  • Inspects quality of raw materials and finished products. Accept/rejects material for quality reasons based on guidance from supervisor. Makes repairs to product material as necessary
  • Operates equipment with minimal supervision. Regularly inspects equipment for wear and makes recommendation to supervisor regarding maintenance
  • Trains new or other employees on job. Oversees the activities of another when assigned
  • Reports production and time, also records other data as assigned
16

Sheet Metal Shopman Resume Examples & Samples

  • Reviews plans and diagrams to ensure accuracy of cutting of materials to create sign parts
  • Plans, prepares and uses materials to be cut in a matter to keep waste to a minimum
  • Cuts materials consistent with specifications of job order
  • Operates metal cutting equipment to accurately cut materials to job specifications
  • Operates welding equipment to weld sign parts together
  • Implements and maintains quality control and safety during material handling, cutting, and welding
  • Sands, grinds, polishes, and cleans cut materials
  • Layout materials to be used for skinning/covering sign structure
  • Bends and shapes sign parts by hand or by using brakes according to job specifications
  • Drills, rivets, screws, or glues sign parts together
  • Performs pre-painting and wiring preparation by cleaning and labeling of parts
  • Touches up paint and performs detail of signs
  • Performs preventative maintenance and minor repairs to sheet metal department equipment
  • Performs duties to ensure department meets expectations and deadlines
  • Trains sheet metal helpers and apprentices according to YESCO apprenticeship requirements
  • Monitors parts and materials inventory
  • Moves materials and cut parts around the YESCO facility
  • Racks and pallets materials for shipping
  • Keeps shop area clean and free from debris to maintain a safe working environment
  • Must possess 3G Welding certificate
  • Ability to read, interpret, and apply specification documents, government coding document information, safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to apply geometric and algebraic mathematical calculations
  • Ability to move materials, equipment, cutting and completed projects
17

Stamping Sheet Metal Team Leader Resume Examples & Samples

  • Operate as a key contributor to the team to set standard work, audit standard work, and improve standard work while problem solving and tracking MDI
  • Has a thorough understanding of jobs within the assigned team area (achieve within 6 months of leadership placement); excludes testing due to complexity and safety requirements may work on the line to support daily production as needed
  • Maintain MDI boards on an hourly basis
  • Participate in GEMBA walks and effectively articulate results, scheduling, problem identification and problem solving activities, etc
  • Actively support Lean concepts such as 9 step problem solving, participating with RIE’s, value stream mapping, 5-S, and material inventory control methods, etc
  • Must be willing to be certified in Team Leader Development program
  • Must be willing to be assigned / rotated through different lead assignments
  • Provide coaching, direction, and guidance to employees in regarding non-conformance to standard work (including, but not limited to, productivity, quality, housekeeping, and safety)
  • Required to work unscheduled overtime as needed
  • Keep supervisor informed of production status and issues affecting daily production rate, product quality and delivery, and employee safety
  • Provide feedback on employee and/or team performance to the supervisor and/or manager
  • Assign work to employees to accomplish daily production plan
  • Work with supervisor to ensure new employees and/or newly placed employees on new jobs or tasks are properly trained per ISO requirements and Standard Work
  • Monitor time and attendance if required due to supervisor absence
  • Perform safety, quality, standard work, and housekeeping audits
  • Assist employees with technical and quality issues on product
  • Coordinate with Engineer and/or Quality Department on engineering / quality issues
  • Coordinate with Scheduling on orders as well as other materials team members on materials issues; coordinate with Stores on material shortages
  • Hold EHS stand downs and safety talks
  • Promote teamwork and collaboration within the team and with other teams or departments
  • Support management decisions and effectively communicate decisions with team
  • Foster a positive attitude and lead by example
  • Performs other duties as assigned by manager
  • Must have demonstrated leadership behaviors/competencies for 2 – 5 years in manufacturing environment
  • Basic computer skills including Microsoft Office
  • Some training may require out of town travel
  • Basic mechanical aptitude and willingness to learn all roles in a given area of the plant
  • Accepts change and is willing to adapt and learn new tasks
  • Responds to coaching and corrective action
18

Sheet Metal Installer Resume Examples & Samples

  • Select types of sheet metal or nonmetallic material
  • Measure and mark dimensions and reference lines on metal sheets
  • Drill holes in metal for screws, bolts, and rivets
  • Install metal sheets with supportive frameworks
  • Fabricate or alter parts at construction sites
  • Maneuver large sheet metal parts to be installed, and anchor the part
19

Sheet Metal Mechanics Resume Examples & Samples

  • Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, and down spouts, in supportive frameworks
  • Select gauges and types of sheet metal or non-metallic material, according to product specifications
  • Drill and punch holes in metal, for screws, bolts, and rivets
  • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds in order to assemble components into products or to repair sheet metal items
  • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills
  • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools
  • Finish parts, using hacksaws, and hand, rotary, or squaring shears
  • Maintain equipment, making repairs and modifications when necessary
  • Shape metal material over anvils, blocks, or other forms, using hand tools
  • OSHA-10 / OSHA-30
  • Proof of Training/Certifications
20

Sheet Metal Techs Resume Examples & Samples

  • Assisting in servicing products and equipment on assigned projects and ensuring customer satisfaction
  • Using a variety of hand and power tools, following blueprints or engineering specifications, to mount, assemble, troubleshoot and repair units
  • Identifying, analyzing and repairing equipment, instruments and products at a customer's location
  • Performing preventive maintenance, site surveys, installations, and modifications as needed or requested by customers, Sheet Metal Field Technicians, or Field Technician Supervisors
  • Maintaining stock of inventory, company equipment, and documents all service-related activities
  • Determining parts to order for repairs and timeliness of need
  • Delivering parts to job sites, as necessary
21

Sheet Metal Resume Examples & Samples

  • Ability to fabricate and place sheet metal
  • 4 years of experience in commercial sheet metal a plus
  • 4 years of experience as a Sheet Metal worker
22

Sheet Metal Mech, Senior Resume Examples & Samples

  • Setup and operate sheet metal fabricating and forming machines such as bulge former, sand blast, nibblers, press brakes, punch press, roll formers, shears, plasma cut, drills, etc
  • Performs responsibilities incidental to the process
  • Assemble, form fit, position, and align component parts in proper relation to each other where subassemblies require precise and difficult locating to include spot and tack welding as required
  • Form production parts involving complex curvatures, sharp angles, and/or deep draws, which result in sever forming; to pre-heat and to hot form material as required
  • Correct multi-plane distortion, shrinkage, and strain by straightening and fitting to close tolerances
  • Layout trim lines, hole patterns, file contours, do hand forming, riveting, bolting, clamping, dimpling, and locating tack weld to build up subassemblies and assemblies
  • Perform pressure testing on fabricated assemblies as required
  • Trim parts with use of band-saw and belt sander
  • Perform daily maintenance and minor machine repairs
  • With minimum training, uses standard measuring devices to perform and document dimensional data as required
  • Assists in the maintenance of a business culture which supports the Company’s overall business objectives and goals
  • Minimum two (2) years related experience
  • Able to operate a variety of hand tools and machines as listed under duties and responsibilities
  • Must have basic mathematical skills to perform calculations in percent, decimals to apply concept and measurement in areas and volumes
  • Ability to apply common sense understanding to carry out detailed and involved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardization situations