Safety Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the safety job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

L Jaskolski

Lillie

Jaskolski

92556 Zora Meadow

Houston

+1 (555) 882 7299

92556 Zora Meadow

Houston

Phone

p +1 (555) 882 7299

Experience Experience

New York, NY

Safety

New York, NY

Nienow and Sons

New York, NY

Safety

Establishing and maintaining the Roche internal Local Emergency Management (LEM) system
Working knowledge of chemical safety management regulations such as TSCA/LCSA and REACh
Support country based WABCO Offices, test tracks and engineering related locations in the implementation of the SHE management system including all relevant risk assessments and improvement programs
Provides technical support and verifies compliance with company and client Environmental Health and Safety policies, Occupational Safety and Health Administration regulations, and other job-specified procedures or standards
Typically does not perform the work being supervised
Supervising and coordinating the Data Privacy Coordinator’s role & responsibilities and ensure that all Group Level privacy agreements are fully adhered to
Assisting the General Manager with the relevant statutory provisions, accompanying relevant routine inspections and co-operate with the General Manager on all SHE matters

San Francisco, CA

Site Safety Manager

San Francisco, CA

Langworth LLC

San Francisco, CA

Site Safety Manager

Audit the workplace organization and Associate behaviors to ensure that training, auditing and scoring methods are accurate and consistent
Assist in planning, organizing and implementing district Safety Management Programs at industrial construction projects
Championing the site EHS committee, and providing guidance and support for H&S representatives
Managing staff consisting of 6-15 direct hire personnel, (staff and hourly craft HSE support)
Refines working knowledge of EHS programs by applying EHS procedures
Participates in monitoring and controlling EHS standards
Ensuring orientation of management, supervision and craft concerning client Safety Procedures, their particular responsibilities, and compliance

present

Detroit, MI

Manager, Production Safety

Detroit, MI

Nicolas-Weber

present

Detroit, MI

Manager, Production Safety

present

Mitigates any concerns by working directly with Production Executives, Producers, Unit Production Managers (UPMs) and other production staff
Assists in on-going evaluation of department programs and services and submits recommendations for improvement
Assists in tracking and evaluating workplace injuries and illnesses, including participating in accident investigations
Performs related special project assignments as requested by senior management
Plans, directs, reviews, and assists productions in complying with a broad range of production safety programs and services
Provide guidance and advice on production safety matters for other Corporate Safety and Environmental Affairs (CSEA) and SEHS staff
Recommends corrective actions and assists productions in their implementation

Education Education

Bachelor’s Degree in Safety

Northern Illinois University

Bachelor’s Degree in Safety

Skills Skills

Excellent developed communication and interpersonal skills as a reliable active communicator
Good knowledge of OSHA, European legislation and guidelines (ATEX, CE, Reach)
Has the desire and ability to perform excellent work
Good knowledge of country legislation
Strong leadership skills and ability to work independently and collaboratively
Knowledge of applicable national, laws, ordinances, statutes, regulations, rules, policies, and procedures
Strong knowledge of PSM systems and elements
Demonstrated SHE functional/technical expertise with strong knowledge of safe work practices, auditing, record keeping, investigation/RCFA, etc
Ability to train, coach, and mentor others
Demonstrated knowledge of industrial hygiene principles and monitoring

Create a Resume in Minutes

15 Safety resume templates

Read our complete resume writing guides

Safety Auditing Professional Resume Examples & Samples

Work closely with Hazard Alignment topic teams to develop specific audits for related issues
Lead partnering effort with Line of Business(LOB)/Operating Areas/Area Safety Professionals in the continuous evaluation and improvement processes for auditing templates and practices. Ex: developing specific Tier 1 & 2 auditing templates for LOBs and specific locations (i.e. Fireworks Storage Facility)
Manage/coordinate all Cast Safety Tier 3 audit activity: scheduling, planning, managing audit team, compiling report-out presentations, managing Action Tracker, follow-up on assigned action items
Apply the safety and health programs, rules and policies during the conduct of audits
Demonstrated flexibility and ability to operate within an ambiguous and changing environment
Excellent written, verbal and presentation skills

Safety & Health Internship Resume Examples & Samples

Attend safety committee meetings
Assisting with special projectsMaintaining documentation files
Must be proficient in Microsoft Word, Excel, PowerPoint, and Outlook
College transcripts (official or unofficial) - Please upload your transcript while completing the online application

Disneyland Safety & Health Internship Resume Examples & Samples

Junior, Senior or Graduate student status by arrival date
Must possess a valid US driver’s license
Ability to climb ladders,occasionally work at heights, work in low light conditions
Park Operations cast member on previous College Program

Director of Safety & Toxicology Resume Examples & Samples

Coordinates inter-department efforts in supporting special projects; Participates in formula review to ensure that corporate safety guidelines are followed
Monitor global raw material safety/toxicology/regulatory issues. Reviews, summarizes, and presents critical issues to R&D management on regular basis
Provide and authorizes safety assessment to support ELC product registration and inquiries globally
Reviews and coordinates safety testing on products and formulas during the product development processes
Represent ELC in trade associations and scientific advisory committees. Monitors key issues of ELC interest; Provides input to Cosmetic Ingredient Review (CIR) of raw material; Participates in Task Forces on issues related to ELC interest
Masters or Ph.D. (Consumer, Food, Drug. Chemical, and/or General Toxicology), with 10 years of experience, required. DABT, ERT, or EU Safety assessor, preferred
Familiar with Risk Assessment methodology and QSAR application
Excellent oral and written communication skills. One or more foreign languages a plus

Services, Safety & Taxes Resume Examples & Samples

100 percent of your focus is the 25-45 audience
You know more about Butler & Warren County government — the services they provide, the commissioners and staff, the budget — than any other media. You get access to all the key players unlike any other media. You are first to report what they are considering and what it means to our region
You are the news leader and watchdog in your field. You are competitive; you consistently break news and you rarely get beat
You track the money, track the influencers. You know how things are supposed to work and you are first to report when things aren't working the way they should
You bring readers the insight, not just the facts. You synthesize stories with smart writing, helping readers understand what decisions mean and cost the public
You build and engage a robust social and community following from which you get story tips and questions/concerns
You are the person that people follow if they want to know what’s important in this area
You ensure your audience is growing and that you pivot when it is not growing
You are comfortable with voice — you bring your unique voice to all your stories, social media, video appearances and public appearances. You are comfortable sharing your personality that helps 25-45-year-olds create a personal connection to you
You engage your audience consistently throughout the week — you build a true community and relationship around your coverage
You continually initiate new techniques in your coverage to meet the interests and needs of 25-45-year-olds
You work with an advertising partner to grow and monetize the 25-45 audience
Pacing: Signature piece once a month. Breaking news weekly. Watchdog that gets to the bottom of the news, weekly
Ability to produce top-notch investigative and revelatory journalism
Exceptional cross-platform storytelling skills
Exceptional core journalism skills (reporting, producing and editing)
Deep understanding of and curiosity about competition for our customers' time and money
Self-motivation and self-direction
Advanced knowledge of social media and how to engage fan base on digital platforms
Photo and video skills
Effective communicator; able to get along with diverse personalities
Able to multi-task and excel under intense deadline pressure in a rapidly changing environment
Knows how to use time efficiently in a 24-hour news environment
Works collaboratively within a cross-functional environment
Must embrace peer-to-peer feedback and training
Applies innovative, creative thinking to support the company’s goals
Writing, spelling, grammar, AP and local style
Command of media law and Principles of Ethical Conduct

Medical Reviewer / Safety Reviewer Resume Examples & Samples

Broader knowledge of ICH/FDA regulations and guidelines affecting drug safety issues preferred
Computer proficient (Windows, Word, Excel)
Must be an RN with industry experience

Safety & Health Professional Internships Resume Examples & Samples

Assisting with special projects
Currently pursuing a two- or four-year safety degree or equivalent
Ability to manage multiple tasks
Ability to handle confidential information
Safety, Environmental, or Industrial Hygiene related major
Successful completion of the Disney College Program or Disney Professional Internship
Successful completion of the Engineering Professional Development Studies class at Disney

Passive Safety Electronics Resume Examples & Samples

MSEE or advanced degree
Thorough understanding of vehicle electrical systems and electrical design/development process
Understanding of circuit design and worst case circuit analysis
Knowledgeable about signal transfer and mechanical-electrical interfaces
Experience in safety systems
CAD packaging experience and/or experience in CATIA and Team Center
Operational knowledge of desktop productivity and CAD software
Familiar with CAN networking tools, diagnostic protocols, and trouble shooting
Knowledgeable about safety targets, deployable devices and safety functionality
Understanding of production processes
Understanding/experience with the design & development of automotive electrical features
Ability to quickly learn the job (with mentoring from others)
Ability to clearly and concisely communicate and interact with others, both oral and written
Ability to interface with many activities and champion issue resolution

Mgr Safety, Health, Environ Resume Examples & Samples

Track and report SH&E metrics as required to the Group, local, state and federal authorities
Ensure compliance with local, state and federal regulations for environmental and safety areas including OSHA guidelines and hazardous materials
Ensure compliance with Group SH&E requirements
Evaluate costs through specific analysis, research equipment and make appropriate recommendations
Evaluate and implement best practices between distribution centers
Participate as a key steering member of safety committee
Conduct regulation inspections and maintain official registers
Organize safety, health and environmental training for new employees
Establish accident prevention measures and identify and develop safety-training programs
Establish emergency response plan and team
Assess departmental procedures and establish work safety standards
Keep up to date with knowledge of industry standards
Train and support operations in accident investigation techniques, working with Operations and Human Resources
Identify sources of physical safety hazards in facility work areas, investigate solutions and make recommendations for corrective action
Analyze factors that may create accidents, accident conditions, or enable multiple accidents
Review and assist in the adoption of standardized “Best Practices” to optimize DC safety
Coordinate all safety efforts with the General Manager and all departments within the DC
Identify high risk accident situations and assist various departments in the implementation of control strategies
Any special assignments or projects relating to SH&E
Certified Safety Professional (CSP) or equivalent certification highly desired
Experience with OHSAS 18001 standard and implementation
3—5 years SH&E experience preferably in a distribution environment
Exemplary leadership skills and ability to work independently
Proficient in Excel, Word, and Access

Manager, Passive Safety Test Resume Examples & Samples

Manage the daily activities of the Passive Safety Test Team
Develop and maintain the Passive Safety Test team’s budget for both CapEx for the development of test rigs and OpEx for the execution of tests at external test labs
Create safety test plans and execute tests for on time completion and within budget
Manage team resource requirements to ensure testing activities are supported in-house and at external test sites
Manage relationships with all external Safety test facilities
Lead design projects and conduct design reviews for the in-house design of custom safety test rigs
Expand and further develop in-house test capability in order to be able to conduct all safety testing in-house
Grow and mature the Passive Safety Test Team to be able to execute all Passive Safety testing in-house
Lead and Track the on-time completion of Test Reports, Test Procedures, and Test Plans
Design, develop and validate Tesla Due Care test procedures and set appropriate judgment criteria
Lead all safety testing according to Tesla test plans and test procedures
Identify and Track open concerns and work with design engineers for corrective action resolution of issues identified during Safety testing
Create KPI’s and communicate test progress to management and design engineering teams
Participate in detailed design reviews (Post-Test) & assist Design Engineering and CAE Teams in root-cause Investigations to determine satisfactory conclusions for concerns identified on test
Review ECO’s for design changes to determine if there is any impact to Vehicle Safety
Organize countermeasure validation testing to confirm corrective action resolution
Participate in new program reviews to provide feedback on vehicle safety performance for product release or “Block” product release into production where concerns have not been corrected
Work with internal engineering teams and external suppliers to develop and validate performance of components and systems and validation activities
Extensive experience in managing a large team of engineers and technicians for continuous operation of safety tests globally
Extensive knowledge of all FMVSS Part 571, ECE, IIHS, USNCAP, and EuroNCAP Test protocols
Knowledge of Real-world Safety fundamentals
The Ideal candidate will have prior experience leading Crash and Safety Testing at a component/system/vehicle level at a major OE
Experience with data acquisition systems (DTS/SoMat) for data collection of vehicle instrumentation with thermal couples/accelerometers/strain gauges/pressure sensors/load cells/LVDT/etc
Experience with High Speed Camera videography equipment (Phantom)
Experience in analyzing data using tools (HyperWorks)
Experience with injury assessment and various Star ratings (US NCAP/Euro NCAP/China NCAP/Japan NCAP) as well as the IIHS and RCAR rating system
Strong interpersonal and communication skills are an absolute requirement to establish effective working relationships with Tesla engineering and test teams, outside test labs and others within and outside Tesla
Broad experience working in cross functional teams to drive product development and a demonstrated ability to influence direction of design based on safety test results
Experience working with various test labs with broad contacts in the field of automotive testing
Effectively handle multiple priorities, organize workload, and meet deadlines
Work in a team-based environment to achieve common goals
Maintain top level professional integrity and appearance
A Bachelor of Science Degree in Mechanical Engineering, Master’s degree preferred
A minimum of 10 years of automotive experience in Safety Testing

Medical Reviewer / Safety Reviewer Resume Examples & Samples

RN's with Pharma experience
Working knowledge of excel and powerpoint
5+ Years Experience Level

Mgr Food Contact Materials Safety Resume Examples & Samples

Provide subject matter expertise in Food Contact Materials (FCM) safety and related regulatory frameworks to support innovation in the Scientific and Regulatory Affairs, Research and Development, Global Sustainable Procurement, and Global Quality functions of The Coca-Cola System (TCCS)
Design and assist with the implementation of strategies necessary to ensure the safety of TCCS FCMs
Generate and amplify the supporting science necessary for a robust FCM advocacy strategy
Proactively re-affirm the safety of TCCS FCMs by building/maintaining an external network (e.g., trade and scientific associations)
Represent the company’s FCM interests in selected external organizations and advocacy initiatives
Support the Director of Food Contact Materials Safety in the creation, communication and execution of scientific and regulatory strategies to address global FCM safety challenges and to mitigate emerging threats
Provide FCM subject matter expertise to TCCS to enable solutions to scientific and regulatory issues. Act as a safety scientific steward and consultant by preparing responses to targeted questions from the field, other functions, business units, bottlers and customers. This includes acting as a resource for general information and gradually becoming a consultant, mentor and trainer for other technical personnel in TCCS
Partner with cross-functional business teams to provide subject matter expertise and FCM Safety reviews for global R&D projects to enable innovation and provide stewardship and governance to re-affirm the safety of TCCS FCMs
In collaboration with global SRA colleagues, monitor and review regulatory development, identify/mitigate potential SRA risks and leverage opportunities related to TCCS FCMs and suggest changes in Company strategies and policies in response to new safety and regulatory questions on FCMs
Represent the Company’s interests in selected external organizations related to FCMs to influence outcomes and advance our scientific and regulatory strategies
Advanced knowledge of FCMs and related production processes. This includes knowledge of standard materials, supplier processes, standards and specifications
Advanced Organic Chemistry: Knowledge of organic structures, reactions, functional groups and properties
Advanced Regulatory expertise: Expert knowledge of the regulatory and political landscape affecting FCMs and to a lesser extent chemicals in general. This includes the ability to anticipate issues from early warnings (including those not necessarily in the FCM field) which could expand and become a threat to TCCS FCMs. Clear expertise in managing complex regulatory issues that impact FCMs
Advanced regulatory toxicology/ecotoxicology knowledge and principles of chemical risk assessments, including general approaches to quantify exposure
Basic Analytical Chemistry: Knowledge of qualitative and quantitative chemical analysis related to FCMs, to include monitoring/understanding of new developments (i.e., techniques, detection limits, etc.) in the field and their effect on packaging materials
Basic Materials Science: Knowledge of principles of materials science (e.g., polymer, metals, ceramics) and their most common manufacturing processes (e.g., thermoforming, injection molding, metal forming)
7+ years of experience in packaging industry, food industry, government or related industry in similar roles
Advanced degree, strong preference for Ph.D. in chemistry, food science, food packaging or related field
7+ years’ experience in food industry, government or related industry in similar role
Experience with safety studies needed for regulatory approval of food contact materials

LP / Safety Supv Reg Resume Examples & Samples

Assists the Loss Prevention/Safety Manager in providing staff assistance to Exchange management for planning, developing, implementing, and evaluating loss prevention programs which include; safety, physical security, and operational review functions. Recommends and assists in implementing modifications to programs, procedures, standards, and techniques on all matters involving loss prevention, asset protection and safety to improve efficiency and effectiveness
Assists in developing and establishing shrink committees and shrink action plans to identify causes of inventory shrink and execute appropriate internal control measures
Assists in the management of the physical security programs (CCTV, EAS, Alarms, and key control systems) to ensure strict enforcement of these programs
Participate and assist in fiscal year end store inventories to include; inventory preparation, taking, and the reconciliation process and report any irregularities to the Loss Prevention/Safety Manager, General/Store Manager or corporate as warranted
Develops strong relationships with command, base, federal, and local law enforcement officials
Incumbents of this position are required to obtain and maintain a secret DOD Security Clearance

Safety & Hazardous Material Analyst Resume Examples & Samples

Researches regulatory updates, evaluates facility compliance status, and develops compliance programs, including responsibilities as a classroom trainer, providing essential EH&S training to Chemical Products Business Unit (CPBU) personnel (DOT training, HazMat training, Lockout/Tagout, Personal Protection Equipment (PPE), Mill/Calendar Safety, Crane Safety)
Performs complete review of all safety programs to assure compliance with current and future regulations
Makes formal presentations at facility safety meetings and to personnel at focused facilities
Monitors the Environmental Compliance Systems (ECS) for all CPBU facilities and maintains chemical inventory database information
Monitors/maintains accurate Material Safety Data Sheets (MSDS) reporting which is critical from OSHA compliance perspective
Transcribes MSDS information into the ECS and reviews and translates applicable health warning and safe use requirements
Provides system and operational support for the Environmental Compliance System (HM100) for assigned facilities, including database maintenance, system updates, and hands on training
Gathers data, compiles and completes the federally required Form R and Tier I and II Reports for assigned facilities
Deciphers the reporting needs, gathers and disseminates the necessary data, and ensures the accuracy of the data as transcribed
Develops all Hazardous Materials documents for new materials at assigned facilities, packages documents and processes through HazMaCo committee for approval. Provides technical and manpower assistance in the processing and disposal of hazardous and nonhazardous waste at assigned facilities
Assists the CPBU Environmental Engineer in the evaluation of current environmental and safety programs to assure compliance and propose corrective measures as needed; reviews proposed regulations, assesses their impact on operations and recommends changes
Provides interpretation and problem solving advice to others inside and outside of the department
Familiarity with engineering, manufacturing and maintenance standards and practices, and familiarity with various Caterpillar systems
The ability to utilize a variety of computer software packages including Microsoft Office software. Candidate will record and maintain data entry
3 to 5 years of job-related experience
2 years of technical school, an apprentice program, a junior college diploma, or the equivalent in on-the-job training
Safety Certifications
The ability to operate warehouse vehicles such as fork lift, order picker and reach truck
Knowledge of OSHA requirements

LP / Safety Manager Resume Examples & Samples

Hire, train, develop, mentor, coach, and supervise loss prevention / safety staff, and ensure these individuals are adhering to established loss prevention/safety policies and procedures as outlined in the loss prevention/safety manual
Ensures operational reviews are conducted monthly at each location. Conduct and ensure operational audits are completed as required for cash offices, vending, safety and other areas as assigned. Works closely with General Manager to correct deficiencies and increase compliance to these requirements
Possess a thorough understanding and effectively use web-based case management reporting systems and ensure the Loss Prevention / Safety staff is utilizing this software effectively as required
Possess a thorough understanding and effectively use all POS exception based reporting tools and ensure the Loss Prevention / Safety staff are properly trained and are utilizing this software effectively in detecting, investigating, and resolving problems
Actively participate in personal and professional development of loss prevention/safety associates as assigned by the District Loss Prevention/Safety Manager and/or Director, Loss Prevention/Safety (CONUS/OCONUS). These include in-store/corporate training, industry standard professional training and collegiate courses in retail, business, safety, and loss prevention
Works under general supervision of the District Loss Prevention/Safety Manager. Support all loss prevention /safety initiatives as assigned. Work is performed independently within the framework of Loss Prevention /Safety Program mission, vision, objectives, policies and procedures. Work is reviewed and evaluated for regulatory and procedural compliance and in terms of overall efficiency in providing security for the Navy Exchange and protection of its assets
3 years experience gained in the administrative, investigative, or loss prevention fields, which enabled the applicant to gain skill in dealing with others in person to person work relationships, and the ability to exercise mature judgment
1 year of related academic study above the high school level may be substituted for nine months of experience, up to a maximum of a four year bachelor's degree for three years of general experience
2 years of progressively responsible experience in retail loss prevention which provided analytical, planning, advisory, operational, or evaluative work in security/investigations, internal review and control techniques, reducing and controlling inventory shrink

Safety Route to Market Manager Resume Examples & Samples

Managerial Competencies & Skills
Drives Innovative Business Improvement
Balances Immediate & Long Term Priorities
Delivers Results
Influence and Negotiation
Communication and Negotiation Skills
Data Analysis
Systemic Vision
Effective presentations and executive reports development
Technical Competences
Experience in Safety & QA Systems (Quality & Safety Management)
Deep Knowledge of quality system KORE Coke Quality and Safety / Environmental / Security
Knowledge of commercial side and business impacts and trends
Vision of work processes
Lead Auditor process experience
Internal Auditor (Quality System Coca-Cola KORE)
National and International Standards such as ISO 9000 and 14000, OHSAS 18000, ISO 22000 (HACCP), etc
Bottling & RTM
Dealing with bottlers and suppliers
Risk analysis and Root analysis thinking and evaluations
IMCR Tool
University or Bachelor’s degree in: Chemical Engineering, Occupational Health and Safety Professional, Industrial Engineering & Similar
Knowledge in Local and International legal regulations (ISO y OHSAS, NOM´s, etc.)
Deep Knowledge of the requirements KORE, statistics, etc
IMCR & SDW tools experience

Manager, Technical Safety Resume Examples & Samples

Leads and directs all aspects of technical safety programs in cooperation with USH EHS
Champion and leader of the LOTO and SCUBA programs within USH Technical Services
Ensures that technical safety training conforms to business unit and corporate requirements, as well as meets all applicable governmental laws, rules and regulations
Working with Technical Services personnel in the development and publishing of JSA and risk assessments
Reviews periodic reports on activities, status, productivity, budget and monitors budget activity for operating cost efficiencies, and makes operating adjustments as required
Provides direction for the development and implementation of technical safety policies, procedures & guidelines and ensures it is uniformly practiced among the Technical Services workforce
Provides work direction, counseling, and coaching to hourly staff to promote safe and efficient operations while also exceeding client expectations of communication, responsiveness, quality of service, and technical efficiency
Audit accident investigations following incidents and provide guidance in analysis and developing measures to prevent recurrences
Assists management in the inspections of workplaces to assure safe and healthful conditions for workers. Prepares appropriate notices for management to issue for abatement of any identified hazards
Provides promotional materials and develops and administers recognition systems to promote safe and healthful work performance
Identify best practices and lead continuous improvement initiatives to reduce work process risks, raise safety awareness, and improve safe work practices
Perform safety audits and inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance
Provide technical advice, coaching, guidance, and mentoring to employees on safety initiatives
Participation in reward and recognition, employee events, and ESAT action planning
Ensures that collective bargaining agreements are upheld by partnering with HR and Labor Relations to maintain positive union relationships
Bachelor’s degree from a four year college or university in Occupational/Environmental Safety & Health Management/Science or related field; or equivalent combination of education and experience required
3-5 years of operations management/team leadership experience; or equivalent combination of education and experience
Ability & willingness to work non-traditional hours, weekends and holidays with short notice
Industry experience with the
Ability to work in confined space locations, areas requiring fall protection/harnesses, navigate ladders and non-traditional workspaces
Professional Certifications: GSP/ASP/OHST/CLCS/CHST
Theme Park Operations knowledge and experience in one or more of the following: Facilities, Maintenance, Ride systems, vehicle upkeep, or technical theater
SCUBA-certified and willingness to become certified as a rescue diver
Ability to multi-task and be flexible is essential
Experience managing in a union environment
Conducted inspections and audits
Maintained metrics and KPI
Prepared technical reports
Issued hot work and confined space permits

Cbna Gf Csis Security & Safety Manager Resume Examples & Samples

Direct activities of BSSA (Business Safety and Security Administrator) and provide training for BSSA's
Administer Master Security Files, all training material, presentations and handouts
Manage vendors and contracts for security & fire safety related services including maintenance of equipment, and manage invoices, purchase orders and expenses, ensuring timely processing and payment
Ensure adequate access control systems and procedures are in place
Provide emergency response support and take necessary security actions, partnering with local business, law enforcement agencies and CSIS senior management
Maintaining Risk Assessment tracking / policy exception spreadsheets and analyze to identify trends, anomalies and security issues and follow up incomplete, insufficient or missing information
Conduct low level investigations under the guidance of CSIS Country Head/Investigations manager
Ensure proper coaching, training and development of CSIS staff as well as outsourced security personnel
Preferably have banking security experience
Experience in conducting security & safety risk assessments
Banking security knowledge preferable
Fire Life Safety Certification preferred

Safety & Risk Control Specialist Resume Examples & Samples

Communicate with the NYC Construction Safety Manager on a daily basis to discuss schedules, project challenges and solutions
Participate in Client project management meetings and conduct safety management oversight visits
Complete timely, technical reports summarizing findings, analysis and recommendations for improvement
Assist in the development and review of contractor/project safety programs
Participate in Project Kick-off, planning and regularly schedule safety meetings
Review and comment on contractors job hazard analysis (JHA) and safe work plans(SWP)
Support client training needs
Manage Willis Towers Watson and carrier based resources for clients
Assist the Willis Towers Watson Claims Team facilitate prompt incident notification, reporting and investigation
Respond to serious incidents
Participate in Willis Towers Watson Staff/Client Service Meetings to brief other associates on safety issues and loss prevention efforts
Review and analyze loss experience on a regular basis to focus and adjust loss prevention efforts
Help develop and execute the strategies of the NYC office and support RCCRA initiatives
Ability to communicate technical information orally and in writing
Understand company products, services, global network, and industry practices

Safety Systems & Business Continuity Manager Resume Examples & Samples

Manage the technical maintenance and development of BBC Corporate Safety Information Systems
Manage the day to day implementation of new and developed components
Project manage the development, delivery and implementation of changing and additional requirements
Hold the Business Continuity Plan for the BBC Safety, Security and Resilience teams

Manager, Production Safety Resume Examples & Samples

Orientation of Department Heads and Crews to the Production Injury and Illness Prevention Program, including enforcement of the program and explaining disciplinary criteria
Evaluation of scripts in advance of production to assist in the identification of possible hazards (i.e. use of aircraft, rigging, stunts, special effects, environmental hazards, etc.) both manmade and natural
Occupational health and safety training program development to ensure safety program compliance (i.e. use of hand and power tools, personal protective equipment, equipment inspection, etc.)
Periodic unannounced inspections of set construction areas (mills and soundstages) and filming locations for missing/altered machine guards, use of PPE, tripping hazards, fire and electrical hazards, blocked exits and other safety-related issues
Travel to filming locations to evaluate hazards which could adversely affect either the production or the environment itself. Examples include overhead power lines, poisonous plants and animals, water bodies which could become contaminated or what that may be unsuitable for cast or crew to become immersed
Five years experience working in Motion Picture & Television production in a safety-related discipline
Ability to communicate effectively and conduct safety training classes for motion picture & television production crews
Strong written and verbal communication skills are also required
Ten years experience working in Motion Picture & Television production in a safety-related discipline
Regulatory compliance experience with OSHA/Cal-OSHA, UFC, UBC, NFPA and environmental regulations
Ability to write and implement safety policies
Certified Industrial Hygienist and/or Certified Safety Professional
College Degree or five years equivalent work experience in motion picture and television production with responsibility for Environmental, Health/Safety compliance

Safety / OH Manager Resume Examples & Samples

Must be able to read and write the English language. Must be capable of effectively communicating both verbally and in writing
Must be capable of providing training in your specialty/qualification/certifications to other employees
Be capable of performing off-site related services, when required
Be capable of working at different shifts to accommodate safety issues and matters
Be capable of lifting a minimum of 50 lbs
Coordinate closely with all divisions; particularly those of Quality Assurance and Training
Serve as the Occupational Safety and Health Manager in developing, planning, organizing and administering a comprehensive program
Comply and participate with the Foreign Object Damage (FOD) Program, as required
Prepares all safety surveys and reports as required
Conduct investigations of safety mishaps and prepare reports
Ensure all Health, Safety & Environment training for all employees is compliant to regulations
Maintain liaison with local command, base/station, state and federal safety organizations to resolve safety hazards; improve the safety program and to remain familiar with the latest safety management techniques
Develop and conducts a monthly safety committee meeting in accordance with all directives. Participate in meetings and boards, both government and contractor
Submit weekly reports to the on-site COR summarizing safety-related events covering the previous week
Reviews production procedures for safety requirements and adherence
Monitors for compliance with corporate safety policy
Acts a member of the Ordnance Certification Board in accordance with all directives
Conducts safety audits
Keep the Safety Program current as directives dictate
Monitors the Hazardous material, Chemical Waste Management and the Hazard Communication Training Programs
Conducts equipment and facilities safety inspections
Maintains the OSHA 300 Incident Log
Implement a site Trend Analysis Program
Is actively involved in all confined space entry situations
Closely monitors the hearing conservation and vision programs
Administration
Legal
Program Manager
Quality

Safety Ops Data Analyst Resume Examples & Samples

Conduct analysis of safety cases in order to identify trends
Lead analysis projects from start-to-finish including all aspects of data analysis: inputting data, scrubbing data, running analysis and reporting results
Partner with program managers, engineers and cross-functional teams to turn analysis into opportunities to mitigate future safety risk
Evaluate other data sources available that can be used to help identify new opportunities to signal bad actor behavior
Measure safety campaign and program performance

Safety Systems & Operations Manager Resume Examples & Samples

Fire and life-safety systems
Alarm-based systems for the protection of artwork
Developing schedule rosters, duty rotations and administrative systems for staffing
Acting as a fire safety director to the museum
Working with other operational managers to ensure best practice and compliance relating to Health and Safety and Fire Safety legislation and maintaining all security records and logs
Acting as a contact for Health and Safety, and Fire safety enquiries
Investigating accidents and recommending solutions
Working with facilities managers to ensure public safety systems are properly tested and maintained
Managing the contract for agency security provision to ensure that the service provided is in line with the standards and requirements set out in the service level agreement
Collaborating with other museum staff to ensure artwork protection
Working as a Security Manager to cover management duties for special events

Manager Corporate Safety Resume Examples & Samples

Implement and maintain health and safety compliance programs to meet and anticipate regulatory requirements - including, but not limited to: Confined Space Entry, Lockout Tagout, Fall Protection, Personal Protective Equipment, Powered Lift Truck Safety, Indoor Air Quality and all associated and required training
Oversee/manage exposure monitoring, lead and asbestos abatement, and employee indoor air quality concerns
Perform accident, injury and illness investigations
Implement safety communication program addressing specific employee and employer concerns through interpersonal and written communication, and training
Perform audits to verify adherence to corporate programs and regulatory compliance
Prepare and submit OSHA compliance reports and permits as necessary
Support production safety and environmental affairs on an as needed basis
Bachelor’s Degree (or relevant experience) in safety management, industrial hygiene, science, or relevant field
3 + years of experience in Safety management
Certifications / Special Training Preferred

Safety & Water Manager Resume Examples & Samples

Develop plan to implement bottlers conformance to new Brazilian environmental legislation
Manage activities of consultants in the source vulnerability assessment process and do a follow up to the facilities of the Brazil Division of their training and information sending
Lead the SVAs reports and the SWPP developed by the facilities and do a follow up to the plan together with the bottlers corporates
Coordinate with the Bottlers the development and implementation of the source water availability plan to support BU 2020 vision goal for production volume increase (BCP)

Safety / Project Engineer Resume Examples & Samples

2-5 years prior experience with safety compliance in a manufacturing facility
Knowledge of federal/state laws OSHA Laws
Experience with safety training
Computer systems, PLC’s, CAD and MS Office software, electronics and electrical systems, mechanical systems, electronics, mechanics, project management
Analytical Skills – review reports, interpret data, and provide recommendations based on data
People skills
College Degree preferably in Safety

Policy Programs Manager, Global Safety Resume Examples & Samples

Lead the design, launch and expansion of global programs that demonstrate the value of our platform and enhance awareness of policy issues
Identify, cultivate and sustain relationships with thought leaders, industry experts, advocacy groups, governmental and non-governmental organizations and academics to create partnerships that deliver both business and social value
Work with US and International policy and communications teams to ensure programs are advancing external understanding around key policy priorities
Manage the creation of communications, educational and marketing materials
Represent policy programs to external partners including high-level policymakers and issue leaders

Director, Production Safety Resume Examples & Samples

Provides guidance and assistance to productions in respect to all health and safety issues. Ensures productions have implemented the required elements of an effective EHS Program, analyzes and responds to safety concerns, and ensures quick and appropriate resolution
Conducts Production Management and Department Head meetings at the start of prep, and communicates with upper levels of production management to discuss safety-related issues
Assesses locations for risks during tech scouts/surveys and works with the Location Managers and Production Management to plan and remediate as necessary
Supervises production-related safety staff, and allocates resources such as time, budget, and consulting manpower, to most effectively address production safety needs
Researches and develops specific safety guidelines for unique production locations or situations. Recommends and coordinates the use of outside consultants when specific expertise is required
Creates written safety materials for productions, analyzes injury statistics to determine trends and/or potential job hazards, and determines the need for revision, further investigation, follow up and/or reporting to regulatory agencies. Coordinates periodic workplace inspections to ensure compliance
Manages the deployment of the tablet-based Production Safety Orientation training for productions located outside of the zone covered by the Contract Services Administration Trust Fund (CSATF) Safety Pass training and provides ongoing support as well as tracking and auditing completion status
Manages production tracking data input and dissemination
Oversees the issue, recovery and inspection of department-owned equipment
Provides consultation on regulatory issues and liaises with public agencies in regard to environmental and safety related matters. Researches recent industry-related compliance issues (accidents, citations, pending litigation) and recommends changes in policy/procedure as necessary
Coordinates and maintains employee training and education programs to increase safety awareness
Creates and manages Sharepoint production safety pages and updates as necessary. Also manages Production Safety Website administration, access dissemination and updates

Director, Production Safety Resume Examples & Samples

Four year college degree in Occupational Health & Safety or science related area preferred
7-10 years work experience in occupational health/safety or related fields required. Prior experience in production safety strongly preferred
CSP certification (Certified Safety Professional) and/or Industrial Hygienist (CIH) certification a plus
7-10 years film or television-production work or experience a plus
Must possess a very strong working knowledge of Microsoft applications and the ability to use, implement, and excel in the use of web-based applications and systems with minimal supervision
Thorough knowledge of OSHA and EPA regulations and the production environment required
Must be able to exercise professional judgment, sometimes in difficult or stressful conditions, in assessing hazards and demanding corrections
Must be able to work independently and operate effectively without supervision and with minimal instruction. Must be able to manage and supervise staff
Excellent verbal and written communication skills required, as well as the ability to maintain a calm, professional demeanor in demanding situations
Strong people skills required to develop good working relationships with studio and production management, and to interact productively with a broad range of people and personalities. Must be skilled in using diplomacy and tact to resolve difficult issues
Must be able to handle sensitive information with discretion
Must be able to prioritize and work within time and budgetary constraints. Good follow up skills required to ensure tasks are taken to completion
Flexibility required to adapt to the changing needs and schedules of productions. Must be able to manage and prioritize multiple assignments in multiple locations

Mountain Safety Attendant Resume Examples & Samples

Enforcing the Skier Responsibility Code and Resort policies with guests and employees including revocation of lift tickets or passes and instructing guests and employees on appropriate behavior
Answering guest questions regarding terrain, directions, and other resort/town information in a professional friendly manner
Ability to ski or snowboard at an intermediate or better level
Concern for the safety of the guests and employees on our slopes
Must be able to lift required equiptment for the position

Mountain Safety Manager Resume Examples & Samples

Demonstrates effective communication skills and strong guest service skills
Oversees the Day to Day Operations Scheduling and adequate staffing. Effective supervisory skills in regards to motivation, morale and positive reinforcement , disciplinary and corrective action and documented mid and end of season evaluations
Extensive knowledge of Mountain Safety and Safety Program Including “Ski Safety Act” and “Your Responsibility Code” Looks for innovative ways to promote and enforce ski safety
Effective working relationships inter/intra departmentally
Extensive knowledge of Breckenridge Ski Resort Operations, including but not limited to risk management, ski patrol, terrain park, ski school, lift operations, guest service
Monitor and prepare budget and payroll Scheduling, Training and development of supervisor and leads
Minimum 2 years of on-mountain experience in Mountain Safety or a related department (Ski Patrol, Security, Mountain Operations)
Professionalism and strong guest service skills, attention to detail and timeliness
Ability to work with confidential information
Flexible schedule required during peak times throughout the year
Advanced/Expert level Skier or Rider
Must have the ability to stand for up to 6 hours
Must have the ability to lift and carry 50 lbs
Previous Supervisory Experience

Safety Policy Manager Resume Examples & Samples

Identify and analyze youth and family online safety policy risks, trends, and issues in the APAC region and share learnings with all teams involved in the online safety policy mission in region and across the company as you aid them in strategic planning, analyzing and responding to safety related legislative and regulatory initiatives, the development and implementation of policy programs and the influencing of policymakers
Provide feedback on the potential impact within the APAC region of our policies, products, and features, to ensure youth and family safety issues are appropriately considered in their development, and assist with landing of the same among policymakers, thought leaders, advocates and civil society
Develop, maintain, and deepen relationships with youth and family online safety partners and academic experts so as to cultivate expert resources and third party advocates/validators needed by public policy, programs, comms, and other teams throughout Facebook
Work cross functionally with comms, public policy, marketing, product policy, security ops, engineering and programs to elevate influencer knowledge and understanding of all the work being done to ensure the online safety of youth and families in our community, with particular emphasis on developing youth and family safety programs events, and presentations needed by the public policy managers in their efforts to influence policymakers, legislation and the like

Safety Systems Analyst Resume Examples & Samples

Experience of working with business information systems
Experience of the coordination and development of systems and applications including understanding user engagement and user acceptance testing. To co-ordinate the team's system related project activities, such as producing regular Gantt charts and monitoring deadlines
The ability to interrogate systems, analyse data and produce high standard reports
A demonstrable aptitude for figures
The ability to prioritise, use initiative and to work effectively under pressure without close supervision to meet deadlines
Proven ability to work in a team environment and to communicate effectively with a range of people and at all levels of the BBC
An understanding of the importance of timely information and reporting without compromising quality
A flexible and pragmatic approach to supporting the wider operational environment
Experience of working in a project environment
Experience of communicating technical processes in plain language that users can understand
Good general knowledge of information technology and IT systems

Mountain Safety Attendant Resume Examples & Samples

High School or Equivalent - required
Must be fluent in all aspects of the English language (spoken and written) - required
Must have excellent guest service skills - required
Must have excellent communication skills - required
Must work well in a team
Must be able to work in inclement weather in a high alpine environment - required
Must be available to work holidays and weekends - required
Must have sight, speech, and hearing abilities sufficient to learn skills, follow and provide directions - required
Must pass on-mountain ski/ride test (equivalent to PSIA Level 7) - required
Previous resort operational experience - preferred
Knowledge of local area/resort - preferred

Safety Records Coordinator Resume Examples & Samples

3+ years of related experience in clinical records/data processing/medical transcription setting
Familiar with database usage
Document management and archiving practices

Senior Manager, Engineering & Safety Resume Examples & Samples

Ensure all Show and Ride equipment maintains the highest level of safety in accordance with Universal Specifications, accepted manufacturing practices and local codes and standards, both directly and through Engineers and other technical personnel managed
Provide technical guidance and mentoring as required to Show and Ride Engineering Managers (EMs), Responsible Engineers (REs), and/or project Technical Managers (TM’s) throughout project and core assignments. Perform all technical duties and take all technical responsibilities in the absence of EMs, REs, and/or TMs
Oversee all technical interaction with attraction Engineering personnel, Vendors, Sub-contractors, and relevant 3rd parties involved with Show and Ride systems
Enforce Show and Ride technical and safety principles to provide a quality product and necessary deliverables to our customer. Support and advise the Attraction Manager/Director on how best to achieve this goal, and keep UPR Core Safety & Engineering briefed on progress and issues. Is responsible to take UPR S&E direction to the project team
Develop an open working relationship with the facility team and specialty & general contractor(s) to ensure a clear line of communication regarding installation, test, and adjust activities
Advise, coordinate, and be accountable to designated Engineering Management regarding the status and engineering quality of Show & Ride systems including areas of risk or potential future risks
Must have a sound understanding of engineering practices and procedures
Demonstrate proficient computer skills, to include, Microsoft Office and AutoCAD
Clear and concise communication skills

Director, Engineering & Safety Resume Examples & Samples

Ensures all Show and Ride equipment maintains the highest level of safety in accordance with Universal Specifications, accepted manufacturing practices and local standards
When Project assigned: Enforce Show and Ride technical and safety principles to provide a quality product and necessary deliverables. Support and advise Project Management on how best to achieve this goal, and keep UPR Core Safety & Engineering briefed on progress and issues. Is responsible to take UPR S&E direction to the project team
Supervise and guide project technical personnel (indirect or direct reporting relationships)
Drive safety improvements across all attractions. Exchange safety information across all parks and attractions. Monitor compliance with regulations and internal standards; develop new safety technologies; and ensure that safety protocols reflect theme park best practices and cutting-edge ideas. Track attraction safety
Makes direct engineering contributions to projects as required relative to engineering, code and standards compliance, Universal Specification compliance, and technical systems achievement of creative and business goals. Reviews the technical plans and results for UC projects as assigned. Enforces Universal's specifications, standards, and technical contracting methods. Assists with Universal Patent pursuit and defense
Interfaces with planning and development groups attached to USJ, USH, UO, and USS operations. May manage UC core technical personnel in existing park expansion and new venue development. Contributes to planning, budgeting, and staffing exercises in support of new UC work, including identifying and screening technical candidates at managerial or higher levels. Advise, review, and approve Project Risk Management for S/R systems related issues
Review and approve contract and legal documents related to Show and Ride systems as required for project work and as authorized by Engineering and Safety management
Oversee ADA compliance for Shows and Rides. Participate in Access Board meetings and activities. Develop and execute innovations/inventions that provide increased accessibility
Contributes to communication of common engineering issues and solutions between all Universal parks. Enhances consolidated use of UPR technical resources
Where assigned, will interface with Corporate Risk Management for S/R systems related issues, including providing technical representation for claims avoidance and defense
Act as Universal’s technical representative for claims avoidance and defense. Act as principal interface to Park and Corporate Legal and Risk Management for Show and Ride systems issues

Safety Principal Resume Examples & Samples

Develop expertise in Safety policies, understanding the nuances by region and abuse types
Investigate the end-to-end service capability for an abuse or a region across policy, workflows and performance
Partner with Product, Policy and Engineering teams to solve complex problems, at scale
Drive global operational excellence for sustained performance and mentor other team members across regions
Ensure on-time delivery of critical initiatives through structured project planning and stakeholder advocacy
Propose, influence, and execute new strategies and tactics using sound analysis and impact metrics to support your positions

Lp / Safety Mgr > Mil Resume Examples & Samples

Works as a collateral duty Safety Manager to provide a safe and secure working and shopping environment for all associates and patrons. Administers the Navy Occupational Safety and Health and Fire Prevention Program to ensure adherence with the safety provisions of applicable Department of Navy codes and standards. Will ensure safety training, awareness programs, safety committees, and accident prevention programs are implemented in all locations as assigned
Develops strong relationships with command, base, federal, and local law enforcement officials, U.S. Attorney, SJA and local prosecutor
Incumbents of this position are required to obtain and maintain a Secret DOD Security Clearance

Mountain Safety Attendant Resume Examples & Samples

Committed to providing the gold standard of guest service
Maintaining and setting up/taking down signs and baffles
Conducting the Safety Talk for the daily Mountain Tour
Monitoring Slow Zones on the mountain
Blocking for snowcats moving on the mountain
Additional responsibilities will be required during Safety Week
May be required to visit Schools in the community to promote mountain safety
High school diploma or equivalent - required
Ability to lift and carry 50lbs - required
Able to read, write, speak, comprehend and understand English fluently - required
Level 7 or above skier or rider - required
Able to work outside in adverse winter weather conditions for the entire day - required
Able to handle difficult guest situations with tact and professionalism
Able to enforce company policy and safety regulations with both guests and employees
Able to stand for extended periods of time up to 8 hours in a shift - required
Able to talk and hear using two-way radios - required
Able to work weekends, holidays and the entire length of the season - required
Familiarity with the Beaver Creek mountain - preferred
Previous guest service experience - preferred

Ingredient Safety Data Manager Resume Examples & Samples

Advanced Regulatory and Food Law Knowledge: Expert knowledge of the food regulatory and political landscape (e.g. regulations, issues, federal/state/local government responsibilities and interactions) affecting food and beverages globally. Ability to locate and navigate through national and international regulations and standards for ingredients, food and beverages
Food Science: Knowledge of principles and techniques of basic food science and their application to the food and beverage industry
Process Improvement: Ability to analyze existing processes and identify more efficient ways to accomplish goals and meet customer and client requirements; ability to continuously improve processes through regular assessment and adjustment
Project Management: Ability to manage projects to ensure successful delivery (on time, within budget, meeting agreed upon success criteria) to establish clear goals and accountabilities. Also includes the ability to develop project plans, allocate resources, identify potential issues/risks and develop contingency plans
Experience working with MSDS information, experience authoring SDS or knowledge of related software systems, knowledge of regulations related to classification and labeling systems

Mountain Safety Attendant Resume Examples & Samples

Enforcing the Skier Safety Act and Resort policies with guests and employees including revocation of lift tickets or passes and instructing guests and employees on appropriate behavior
Performing trail maintenance on the mountain including placement of ropes, checking for hazards, marking terrain with baffles/poles, and packing or shoveling snow
Assisting with the lifting and transportation of toboggans
Answering guest questions regarding terrain, directions, and other Resort/Town information in a professional friendly manner
Level 7 Skier/Rider

Mountain Safety Attendant Resume Examples & Samples

Enforcing the Skier Responsibility Code and Resort policies with guests and employees in a professional friendly manner, including revocation of lift tickets or passes and instructing guests and employees on appropriate behavior
Placing and monitoring signage and baffles in various on-mountain areas
Previous resort operational experience, preferably in Mountain Safety or Guest Service
Previous guest service experience

Ap & Safety Spec Resume Examples & Samples

Must be able to stand and/or walk for long periods of time observing and assisting customers and employees
Must be able to install equipment at various heights, use step-stool or ladder, etc
Must be able to write, type and use phone system

Dir, Food Contact Materials Safety Resume Examples & Samples

Create, communicate, and execute scientific and regulatory strategies to address global packaging safety issues, and to mitigate emerging threats. Identify / mitigate potential SRA risks and leverage opportunities related to our food contact materials. Collaborate with other stakeholders to define and deploy strategies/plans
Provide leadership in management of SRA-related packaging safety issues / crises by educating Company business leaders and task forces and influencing strategy/direction. Review and evaluate reported crisis and formulate a plan of action for handling the incident/issues based on area of expertise/responsibility
Provide food packaging expertise to the system to enable solutions to scientific and regulatory issues that affect our products. Act as a scientific expert and consultant by responding to targeted questions from the field, other functions, business units, bottlers and customers. This includes acting as a resource for general information and acting as a consultant, mentor and trainer for other technical personnel in the Company
Partner with cross-functional business teams to provide SRA approvals for new recycling technologies and food contact materials for global R&D projects to enable innovation while providing stewardship and governance to ensure all our packages are safe
Monitor external environment and develop/initiate changes in Company strategies and policies in response to new safety and regulatory concerns around food packaging
Represent the Company’s interests as a leader in global external organizations related to food packaging to influence outcomes and advance our scientific and regulatory strategies
Advanced Regulatory Affairs: Ability to interact with government officials to represent the Company or soft drink industry while explaining complex scientific data, reports or issues. This includes the ability to anticipate issues or concerns of interest to public health officials in order to respond to those concerns and the ability to advocate a position in a non-adversarial manner (e.g., during dispute resolution)
Advanced Regulatory Knowledge: Expert knowledge of the regulatory and political landscape (e.g., regulations, issues) affecting food and beverages globally. This includes the ability to manage PAR approvals (including MSDS and transportation) and interact with field on customs issues. It also includes the ability to manage complex regulatory issues affecting products, ingredients, packages or claims
Basic Analytical Chemistry: Knowledge of qualitative and quantitative chemical analysis. This includes preparation, separation, detection and other techniques and applying concepts of precision and accuracy. It also includes understanding new developments in the field and their effect on our products, ingredients and packaging materials
Basic Material Science: Knowledge of principles of material science (e.g., polymer, metals, ceramics) and manufacturing processes (e.g., thermoforming, injection molding, metal forming) including how material selection can affect these processes. Ability to select materials compatible with products of the Company
Basic Packaging: Basic knowledge of packaging materials and the related production processes. This includes knowledge of material compatibility, supplier processes, standards and specification
Basic Organic Chemistry: Knowledge of basic organic structures, reactions, functional groups and properties needed to understand the reactions of organic compounds in Company products. This includes the understanding of moderately complex principles in order to problem-solve package or ingredient related issues
Basic Polymer Chemistry: Fundamental knowledge of the separation and characterization of polymers and the ability to apply this knowledge to challenges (e.g., plastic packaging) in Company products
Advanced degree, Ph.D. preferred, in chemistry, food science, food packaging or related field
Ten or more years of experience in food industry, government or related industry in similar roles
Experience with safety studies needed for regulatory approval of new ingredients and/or food contact materials
Experienced research and project manager

Automated Driving Engineer Hazard Analysis for System Safety Resume Examples & Samples

Masters in Engineering (EE ME IE) or equivalent
Experience in automotive safety analysis
Experience with Software failure analysis at the architecture level
Working knowledge of ISO 26262: Functional Safety for Automotive Vehicles

Lp / Safety Mgr Resume Examples & Samples

Manage and conduct all internal and external theft investigations, suspected unethical conduct, accidents, workplace violence, fraud, waste or abuse and ensure that activities are conducted within the framework of established departmental investigative policies and protocols. Conducts and provides oversight on overnight surveillance activities, covert camera installations, investigations, and the interviewing of all dishonest associates, vendors and contractors. Prepares and ensures that results of all investigations are documented professionally in reports according to departmental standards
Works with store operations to develop and establish shrink committees and shrink action plans to identify causes of inventory shrink and execute appropriate internal control measures
Manage and oversee the physical security programs (CCTV, EAS, Alarms, and key control systems) to ensure strict enforcement of these programs
Participate and assist in fiscal year end store inventories to include; inventory preparation, taking, and the reconciliation process and report any irregularities to the District Loss Prevention/Safety Manager, General/Store Manager or corporate as warranted

Director of Safety & Risk Control Resume Examples & Samples

Provide strategic leadership, mentoring and coaching to a diverse team of safety and risk control professionals in support of domestic and international operations
Demonstrated ability to build rapport and effective performance based relationships with senior executives at C-suite level and coach executives on matters related to safety and risk control. Must be able to motivate and inspire others and function as a change agent to drive continuous improvement
Demonstrated ability to lead the development of enterprise wide strategies for the proactive control of risk and the development and implementation of strategic business plans for the Safety & Risk Control group
Demonstrated ability to build consensus and gain influence without formal authority for strategic initiatives and organizational culture change
Increase visibility across the enterprise for safety and risk control related issues, including the case-for-change for occupational safety, fleet safety, and general risk control. Includes frequent large group presentations, key meeting attendance, executive level one on one meetings, etc
Recruit, assess, train and develop Safety & Risk Control staff to create and maintain a high performance team
Help align around the different business sections across North America and the globe around ONE Aramark in the area of safety and risk
Bachelor's degree in related field (MS or MBA preferred)
10 + years professional experience in Safety, Health, Environmental and Risk Management, general business management, consulting, or performance improvement
Experience in a manufacturing environment or environments with laundry facilities or “high risk” environments is required
Experience must include leading and managing a staff of professionals and technicians through major organizational change initiatives and a strong working knowledge of change management fundamentals
Experience must include direct interface with senior operating leaders within an organization above the site, plant or unit level
This position is located in Burbank, CA and local candidate are preferred. This position may require up to 30% travel

Safety Systems Specialist Resume Examples & Samples

Manage the day to day implementation of new and developed components, system and tools
Project manage the development, delivery and implementation of new tools and enhancements
Work with the business and external suppliers to further develop the portfolio of safety management tools
Enable the system to meet requirements of relevant safety legislation
You will have experience of initiating and delivering business information systems, development projects and service propositions within a technically complex environment involving multiple stakeholders
With the ability to analyse business processes and systems, you will draw conclusions and produce supporting documentation including the development of user requirements and specifications
Experience of working with recognised technology standards is required and you will interpret and communicate technical information/ specifications and assess technical proposals in response to user requirements
We are also looking for experience of management and development of systems and applications including understanding of the benefits of agile development techniques, information system architecture, user engagement and user acceptance testing
The successful candidate will have experience of managing service delivery contracts plus financial responsibility and budgeting for managing projects with an understanding of business and financial systems and processes
With a sound understanding of risk management, particularly in the context of business information system design and implementation, you will show resilience and stamina to sustain performance when under pressure from a high volume of work and conflicting priorities
You will have interpersonal and communication skills sufficient to establish and maintain effective working relations with a wide range of internal and external contacts
A Project Management certification, experience of presenting business cases to senior approval boards, development/delivery of training and an understanding of the BBC’s structure and approach to business continuity would also be advantageous

Manager, Production Safety Resume Examples & Samples

This position determines which television productions on the assigned list have a higher risk potential and takes appropriate actions to increase safety factors. This position determines when a WB Safety presence is needed, how to increase production compliance with required regulatory matters, and develops relationships with production crews in order to assess their experience level and need for monitoring
In order to reduce foreseeable potentially hazardous activities, this position is responsible to discuss potential concerns with appropriate department heads. Concerns include: unusual locations, stunts, stunt rigging, special effects, proximity of action to actors, employees, or the public. Responsible to assess all potential hazards to employees, the public at large, and property
This position takes appropriate actions to increase safety on productions, based on experience and information regarding each production. Some visits are announced and others are not. When time is available and another WB production is nearby, this position maximizes opportunities to visit other crews
This position is familiar with critical aspects of filmmaking including camera positioning, framing, visual effects, POV, FX equipment, and routine stunt parameters and appropriate safeguards. With minimal impact to the production, this position is able to work effectively with Production to alter scene elements to reduce perceived risk by management, cast or crew
When significant last minute script changes are made impacting crew, public or property safety. These elements are to be discussed with WB Risk Management and the WB production executive. Whenever unresolved issues regarding employee safety remain a concern, this position remains on site and acts as oversight until a resolution is reached
This position acts as the liaison between applicable local regulatory agencies and the production crew to comply and enforce government mandates. This position will ensure WB Safety expectations are met, studio protocols are followed, required documentation is maintained, compliance with mandatory training and credentials, and will also assist with notifications required by specific States, Provinces, Agencies, and WBSF Departments. Researches shooting locations in order to ensure compliance with the US Federal; US State; or Canadian environmental regulations
Address and assist with agency investigations, find any problems, eliminate or minimize fines, maintain WB’s standards, and avoid repeat violations
Serves on the motion picture industries CSATF/AMPTP Safety Committee as well as WorkSafe B.C.'s ActSafe Committee to ensure reasonable industry approach to production related matters affecting both Management and Labor. Will gather information for use in interpreting new or proposed US Federal; US State; or Canadian regulatory standards and the effect they may have on production
Will stay informed and participate in pertinent technical production topics addressed by the Safety Advisory for Fire and FX in Entertainment (S.A.F.F.E.) and WorkSafe B.C.'s ActSafe Committee. Works with the Safety Pass Training Center and will review material applicable to production and ensure course content that is relevant, understandable, and achievable by production employees

Safety Standards Engineer Resume Examples & Samples

B.S. Degree in Mechanical Engineering
Four plus years of Seat and/or Restraint Design & Release experience
Experience and knowledge of regulatory requirements globally
FMVSS (Federal Motor Vehicle Safety Standards,
UN/ECE (United Nation/Economic Commission for Europe),
GCC (Gulf Cooperation Council), and
China
Experience and knowledge of the self-certification (CDP&R) process and Type Approval (witness testing) process
Knowledge of Engineering Disciplines, D&R engineering tools and GPDS deliverables

Safety & Risk Manager Resume Examples & Samples

Help Coach and Lead staff in accordance with facility and Aramark standards
Work closely with Aramark Safety & Risk Control, Vice President of Operations, Director of Compliance & Sustainability, Location General Managers, and National Park Service to review, implement and enforce Aramark's SAFE Commitment
Assist supported locations, site based management teams to effectively execute against safety standards and requirements
Assure highest levels of Guest Service and Quality Control
Maintain working relationship with local and regional compliance and regulatory authorities (Local / County Health, etc.)
Coordinate and Support Yosemite Safety Meeting / Committee Structure
Conduct internal occupational safety, food safety assessments, and injury investigation injury follow up; follow-up with corrective actions resulting from assessments by external agencies
Ensure the location has the current Aramark safety standards and procedure documentation in place and verify the implementation and execution of Aramark safety standards and procedures
Accompany Health Department / Regulatory Inspectors during on-site inspections and respond to regulatory non-compliance and to the best of ability - mitigate or limit any future inspection violations
Effectively manage internal and external corrective action processes to comply with regulatory requirements to identify cause, address problems, restore control, evaluate and monitor processes, modify procedures or improve the overall safety system approach, and prevent recurrences. This is Inclusive of support for infectious disease protocols as it relates to Hantavirus, Plague, etc
Assist in establishing management systems for Occupational Safety- (OHSAS 18001), Environmental Management (ISO 14000), and Food Safety Management (ISO 22000)

Disneyland Occupational Safety & Industrial Hygiene Resume Examples & Samples

Assist in OSHA compliance audits and report findings and assist in development of corrective action plans
Assist in providing assistance with maintaining SharePoint sites
Maintaining documentation files
Currently enrolled in a Bachelor’s Degree or Post Graduate degree at an accredited 4 year College or University
Safety, Environmental, or Industrial Hygiene related major. Engineering, Construction Management or Project Management major with an interest in pursuing a safety related career
Guest/Customer Services background

Occupational Safety & Industrial Hygiene Internships Resume Examples & Samples

Conduct field surveys and develop JSA’s to determine site-specific safety requirements such as equipment specifications, machine guarding requirements, proper protective attire, and training
Currently pursuing a four-year safety degree or equivalent
Cumulative GPA of 3.0 or higher (Note: Cumulative GPA stated on resume and application must match cumulative GPA of current institution’s transcript. Please, no rounding.)
Comfortable functioning in a fast-paced, ever-changing environment

Haccp Safety Manager Resume Examples & Samples

Bachelor's degree preferred– Environmental, Safety & Health, Business Administration, or Public Health Degree preferred
Minimum 1-2 years of occupational and/ or food safety experience
Flexibility to work within a dynamic work environment
Excellence Communication skills - verbal and written
Possesses Strong Coaching, Influencing & Negotiating skills
Comfortable in providing training and coaching to management and hourly employees
Ability to pro-actively assess location food and occupational needs, assist in finding solutions to needs in conjunction with operational team

Bank Security & Safety Manager Resume Examples & Samples

Acts as a liaison between Bank personnel and law enforcement authorities when responding to robberies or other crimes
Administers security devices and settings at all Bank facilities; identifies, analyzes, and controls existing and potential safety hazards
Provides security and safety training, support and guidance to all Bank personnel
Advises the Bank's Director of Corporate Security, Senior Management and Bank personnel of emerging security and safety issues and consults and guides the Bank in the establishment of controls to mitigate risks
Assists the Director of Corporate Security in ensuring department activities run smoothly and efficiently by providing leadership, training and supervision within the department
Serves as the department liaison; handles resolution of complex or escalated issues; performs manager level approvals and reviews
Creates, updates and implements security policies and procedures; leads projects, development and training activities, and vendor relations
Performs direct supervisory duties of assigned department staff, coordinates staff for coverage in assigned areas of the department
Monitors, evaluates, and coaches performance of staff; approves timesheets and time-off requests; makes recommendations in personnel actions such as hiring, promotions and disciplinary actions
Fully knowledgeable and skilled in all areas of the department
Advanced knowledge of asset management and regulatory compliance pertaining to the banking industry
Advanced knowledge of banking security systems and protocols
Advanced knowledge of banking operations and related regulations
Technical aptitude with proficiency with Microsoft Office applications (Excel, Outlook, Word) and the ability to navigate various security systems and operate video surveillance and recording software and equipment
Strong leadership and interpersonal skills
Ability to develop effective business partnerships, build consensus across diverse teams, and achieve results through the effort of others
Ability to maintain composure and make sound decisions under conditions of urgency and in pressure situations
Knowledge of security operations and procedures including verbal and physical de-escalation techniques, emergency situation protocols, and crisis intervention strategies
Flexibility to provide after hours and weekend support as needed
Strategic and problem solving mindset with developed analytical ability
Strong planning and organizational skills, with an ability to establish a strategic direction and subsequently develop and manage supporting initiatives
Excellent organizational and analytical skills with strong attention to detail and high concern for data accuracy
Proven ability to prioritize and manage workload in a high-pressure environment and to instill a sense of urgency in others as necessary to meet deadlines
Excellent collaboration and problem solving skills with the ability to identify and develop solutions for business needs
Demonstrated ability to effectively give critical feedback and coach employee performance
7-10 yearsâ€™ experience in bank security, law enforcement, or closely related field
Banking or financial services experience preferred, with supervisory or management experience
2 or more direct reports

Cbna-gf-csis Security & Safety Manager Resume Examples & Samples

Assist and support the CSIS Country Head to ensure compliance to Citi policies related to Security & Fire Safety policy
Provide the Fire Safety training to employees and security vendors
Ensure compliance with policies for building, maintaining guarding standards, and review incident logs and take remedial action where necessary
Supervise the Access Card to ensure that procedures are properly followed
Develop a comprehensive program that will effectively plan for minor and major incidents
Directly manage the Philippine Security Command Center and ensure a high level of interface into the Regional Command Center
Coordinate emergency evacuation drills as well as participate in tabletop exercise to ensure a state of preparedness exits
Advise businesses on security aspects of new sites, restacks and other projects for business expansion as necessary
Experience in conducting Fire Safety Briefing / Training on Emergency drills
Typically have 5+ years of experience in Security Management, Incident Management, Security System Planning & Design & Fire Safety Programs
English Language: written & spoken
Security certifications (local or global) preferred
Small team management experience
Ability to work flexible hours and independently

Supervisor, Operations Safety Resume Examples & Samples

Conducts regular guest safety audits around the resort and addresses observations. Reviews incident reports and tracks corrective action to completion. Analyzes and responds to various reports including but not limited to guest comments, downtimes, and incident reports, stays current with ASTM safety standards. Ensures the safety of guests by reviewing and revising safety practices and procedures and documents and responds to potentially unsafe conditions
Supervises team of Attractions safety coaches who perform daily audits of operational procedure compliance. Coaches and uses counseling forms to document and maintain safe team member actions in accordance with UO policy, highly engaged in the Attractions Operations Safety Committee Meetings and is a contributing member
Manages the quarterly Attractions Operations Safety Recognition Program; Participates and tracks yearly Attraction Operations Mock Evacuation Drills; Highly engaged in Production Shoots that involve our parks attractions to ensure safety guidelines are being followed; partners with the L&D Team to ensure proper safety content is presented in OJT training programs
Understands and actively participates in Environmental, Health & Safety responsibilities by following established UO policy, procedures, training and team member involvement activities
Regularly (2/3 of the time or more) talk; hear audible alarms, voice commands with background noise; use repetition-using an input device-a keyboard or mouse-in a steady manner; maintain concentration/focus (e.g., ability to interpret the work environment and make decisions on predetermined operating policies and procedure)
Frequently (1/3 to 2/3 of the time) stand, sit and walk for prolonged periods (including ability to walk at a given pace that is predetermined by a moving sidewalk); use hands and fingers to grip, pinch, handle or feel objects, tools or controls; climb stairs / ladders; lift/push up to 20 pounds with control; work in varied light conditions including low or diminished lighting; maintain alertness and attentiveness up to 4 hours while working varying hours
Occasionally (1/3 of the time or less) work at heights for prolonged periods of time including heights with or without railings or over open pits greater than 4 feet; balance; stoop, kneel, crouch or crawl; reach, pull, push with hands and arms above/below head; repeat motions more than twice per minute; work in an environment subject to vibrations; work in an environment with flashing lights including strobe lamps; smell; work in small or tight spaces
Specific vision requirements for this role include: close vision with or without corrective lens (clear vision at 20 inches or less); distance vision with or without corrective lens (clear vision at 20 feet or more); color vision (ability to identify and distinguish colors); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (vision, ability to judge distances and spatial relationships); adjust focus (ability to adjust the eye to bring an object into sharp focus while in changing light conditions e.g., sunshine to indoor or dark conditions)

Bank Security & Safety Manager Resume Examples & Samples

7-10 years experience in bank security or closely related field
Supervisory or management experience in the banking or financial services
Experience with development and enforcement of security policies and procedures in accordance with the Bank Protection Act

Lp / Safety Supv Resume Examples & Samples

Assists with assigned internal and external theft investigations, suspected unethical conduct, accidents, workplace violence, fraud, waste or abuse to ensure that activities are conducted within the framework of established departmental investigative policies and protocols. This may include oversight on overnight surveillance activities, covert camera installations, investigations, and the interviewing of dishonest associates, vendors and contractors. Prepares and ensures that results of all investigations are documented professionally in reports according to departmental standards
Assists the Loss Prevention/Safety Manager as a collateral duty safety supervisor to provide a safe and secure working and shopping environment for all associates and patrons. Assists in administering the Navy Occupational Safety and Health and Fire Prevention Program to ensure adherence with the safety provisions of applicable Department of Navy codes and standards. Will ensure safety training, awareness programs, safety committees, and accident prevention programs are implemented in all locations as assigned
Assist in the development and supervision of loss prevention / safety staff as assigned, and ensures these individuals are adhering to established loss prevention/safety policies and procedures as outlined in the loss prevention/safety manual
Actively participate in personal and professional development of loss prevention/safety associates as assigned by the Loss Prevention/Safety Manager, District Loss Prevention/Safety Manager and/or Director, Loss Prevention/Safety (CONUS/OCONUS). These include in-store/corporate training, industry standard professional training and collegiate courses in retail, business, safety, and loss prevention
Works under general supervision of the Loss Prevention/Safety Manager. Support all loss prevention /safety initiatives as assigned. Work is performed within the framework of Loss Prevention /Safety Program mission, vision, objectives, policies and procedures. Work is reviewed and evaluated for regulatory and procedural compliance and in terms of overall efficiency in providing security for the Navy Exchange and protection of its assets

District Loss Prev / Safety Mgr Resume Examples & Samples

Oversee and manage all internal and external theft investigations, suspected unethical conduct, accidents, workplace violence, fraud, waste or abuse to ensure that activities are conducted within the framework of established departmental investigative policies and protocols. This includes oversight on overnight surveillance activities, covert camera installations, investigations, and the interviewing of all dishonest associates, vendors and contractors. Prepares and ensures that results of all investigations are documented professionally in reports according to departmental standards
Works as a Collateral Duty Safety Manager and oversees the Safety Program providing a safe and secure working and shopping environment for all associates and patrons. Administers the Navy Occupational Safety and Health and Fire Prevention Program to ensure adherence with the safety provisions of applicable Department of Navy codes and standards. Will ensure safety training, awareness programs, safety committees, and accident prevention programs are implemented in all stores within an assigned district
Hire, train, develop, mentor, coach, and supervise loss prevention / safety managers and supervisors and ensure these individuals are adhering to established loss prevention/safety policies and procedures as outlined in the loss prevention/safety manual
Ensure that Loss Prevention / Safety staff actively execute and participate in required Loss Prevention and Safety Programs
Ensures operational reviews are conducted monthly at each location. Conduct and ensure operational audits are completed as required for cash offices, vending, safety and other areas as assigned. Works closely with District Vice Presidents to gain compliance to these requirements
Works with store and district operations to develop and establish shrink committees and shrink action plans to identify causes of inventory shrink and execute appropriate internal control measures within an assigned district
Manage and oversee the physical security programs (CCTV, EAS, Alarms, and key control systems) for all stores within an assigned district to ensure strict enforcement of these programs
Personally participate and ensure that assigned loss prevention / safety staff actively participate and assist in fiscal year end store inventories to include; inventory preparation, taking, and the reconciliation process and report any irregularities to the District Vice President, General/Store Manager or corporate as warranted
Possess a thorough understanding and ability to train on web-based case management reporting systems and ensure the Loss Prevention / Safety team within the assigned district is utilizing this software effectively as required
Possess a thorough understanding and ability to train on all POS exception based reporting tools and ensure the Loss Prevention / Safety team within the assigned district are properly trained and are utilizing this software effectively in detecting, investigating, and resolving problems
Actively participate in personal and professional development of loss prevention/safety associates as assigned by the Director, Loss Prevention/Safety (CONUS/OCONUS). These include in-store/corporate training, industry standard professional training and collegiate courses in retail, business, safety, and loss prevention
Develop and ensure strong relationships, partnerships, and communication skills at all levels of the organization to include Corporate, District, Store Operations, as well as other Loss Prevention/Safety Industry professionals
Develops strong relationships with command, federal, and local law enforcement officials, U.S. Attorney, SJA and local prosecutors for those geographic areas within the assigned district
Works under general supervision of the Director, Loss Prevention/Safety (OCONUS/CONUS). Support other loss prevention /safety initiatives as assigned by the Vice President, Loss Prevention/Safety and/or Director. Work is performed independently within the framework of Loss Prevention /Safety Program mission, vision, objectives, policies and procedures. Work is reviewed and evaluated for regulatory and procedural compliance and in terms of overall efficiency in providing security for the Navy Exchange and protection of its assets
Requires Secret (S) Security Clearance

Workers Compensation & Safety Manager Resume Examples & Samples

Monitor all lost time, light duty & litigated claims and ensure that such claims are being handled appropriately and closed timely; provide supoort for insurance adjusters, GM's and Superintendents, and defense attorneys on litigated claims
Cut frequency and severity of w/c claims through training, implementation of AGC safety manual
Schedule and chair corporate safety meetings; oversee bi-annual claim reviews on claims reserved at $25,000 or more
Provide training to general managers about AGC safety self-audit, reinforce the importnace of accident investigation, compliance with safety meetings
Create and distribute the quarterly safety bulletins

Asset Protection & Safety Divisional Manager Resume Examples & Samples

6-8+ Years of Experience in Asset Protection or a related field
Previous leadership experience is required
Wichlander Zulaski Certified is preferred
LPQ Certified is preferred

Asset Protection & Safety Manager Resume Examples & Samples

Responsible for the Professional Development of self and Retail Asset Protection Specialists (if applicable) through successful on-boarding, training and coaching. Responsible for driving recognition and engagement of Asset Protection Specialists (if applicable) and retail Outfitters. Measured through formal visits, training completion and regular business reviews
Active member of the Safety Committee and ensures key initiatives, compliance and tasks are completed on time. Performs Safety audits / observation programs as prescribed to ensure compliance and behavioral aspects of the Safety Culture. Ensure Safety programs are being communicated, executed and delivering positive results. Requirements
Other Duties as Assigned by Management

Snow Safety Manager Resume Examples & Samples

Meets all requirements of Supervisor, Team Lead or Specialist patroller
Familiarity with Park City / Canyons ski area and avalanche related activities
Must have extensive experience in forecasting, evaluation and mitigation in a large-scale resort setting
Familiar with avalanche zoning in and out of area
Must be proficient in use of high explosives and ATF regulations
Must have and maintain ATF Clearance
Must have working knowledge of all ICS and professional patrol rescue procedures
Minimum 5 years as route leader at Park City / Canyons and/or 10 years professional patrol experience at a resort with significant avalanche terrain
Formal Education: (preferred)
National Avalanche School
American Avalanche Institute, Level II or higher or equivalent
International Snow Science Workshop
High School Degree or equivalent
Demonstrated leadership skills with snow safety teams
Must have and maintain OEC or equivalent certification – pre-approved by Patrol Sr. Manager

Safety Detection Analyst Resume Examples & Samples

Create machine learning algorithms to solve complex business problems and ensure the safety of the community
Use sound analysis and impact metrics to develop new strategies and processes that increase operational efficiency and deliver better user experience
Apply your expertise in quantitative business analysis, data mining, and the presentation of data to identify trends and opportunities in driving down nefarious behavior
Develop and lead end-to-end project plans and ensure on-time delivery of critical initiatives

Safety Operations Analyst Resume Examples & Samples

Regularly review and remove graphic content that violates our Statement of Rights and Responsibilities
Analyze data to identify trends in site safety and malicious attacks
Work directly with users and provide scaled support to resolve their issues
Partner with Engineering, Security, and Analytics to identify, influence, and execute our abuse fighting strategies and tactics while improving the user experience on the site
Drive change and collaborate effectively with a variety of individuals and organizations inside and outside the company
Use sound analysis and impact metrics to solve complex business problems and develop new strategies and processes that increase operational efficiency and deliver better user experience

Safety & International Lead Resume Examples & Samples

80%: Execution of Pharmacovigilance System Audit Plan
10%: Regulatory Agency Support
At least 7 plus years experience in Pharmaceutical research experience including auditing experience especially in pharmacovigilance audits

Specialist, Workplace Safety Resume Examples & Samples

Participate, coordinate and lead different levels of accident review board, at the local, regional, divisional and corporate level
Investigates the adequacy of ventilation, exhaust equipment, lighting, and other conditions that could affect employee health, comfort or performance. Evaluate and recommend engineering and administrative remediation steps and determine which controls to put in place
Inspects company facilities to assure the compliance with safety and fire safety standards set forth by the company and applicable government agencies. Completes written report on each inspection. Inspect mobile employees operating in community
Lead system management on regulatory agency inspections inclusive of FCC, FAA, EPA, DOT/FMCR inspections. Support Workers' Compensation inspections
Inspect, measure gaps, and apply best practices to all DOT fleet management. Identify waste streams from Comcast facilities and work practices and coordinate disposal efforts

Supervisor Tech Safety Resume Examples & Samples

Assists the Safety Manager with the implementation and continuous improvement of safety programs
Participates and coordinates incident investigations from initiation to checking of final closure corrective actions
Assist with the development of lock out/tag out, fall protection, diving, and confined space procedures
Maintains recordkeeping systems such as the safety training, crane, fall protection, confined space certifications, and other training systems that are currently in development
Assist with industrial hygiene monitoring as required
Ability or desire to learn SharePoint to assist with updating the safety site as needed
Assist the safety manager during safety training
Participate in reward and recognition, employee events, and ESAT action planning
Coaches and motivates Technical Services hourly team members to promote safe and efficient operations while also exceeding client expectations of communication, responsiveness, quality of service, and technical efficiency
Supports USH’s environmental, health & safety policies
Provides excellent customer service
Associate’s degree (AA) or equivalent from two-year college/technical school or equivalent combination of education and experience required. Bachelors of Science (B.S.) Safety Science or related field of study (environmental engineering, industrial engineering) preferred
Associate Safety Professional (ASP) or Graduate Safety Professional (GSP) preferred
1-3 Years technical and trade experience or equivalent combination of education and experience
Ability & willingness to work non-traditional hours, overtime, weekends and holidays with short notice
Ability and willingness to respond to incidents in locations requiring climbing, fall-protection, and other non-traditional work-environments
Proficiency in Microsoft Word, Excel, Outlook and PowerPoint
Excellent organizational, verbal and written communication skills
Demonstrated ability to work with all levels of employees and management, and willingness to give assistance to co-workers in other areas. Strong team player
Strong interpersonal and analytical skills
Demonstrated ability to work independently under pressure; proactive thinker/self-starter
Ability to multi-task and be flexible with work and scheduling

Safety Policy & Programs Manager, Latam Resume Examples & Samples

Identify and analyze policy risks, trends, and issues in the LATAM region and share learnings with all teams involved in policy mission in region and across the company as you aid them in strategic planning, analyzing and responding to related legislative and regulatory initiatives, the development and implementation of policy programs and the influencing of policymakers
Provide feedback on the potential impact within the LATAM region of our policies, products, and features, to ensure safety issues are appropriately considered in their development, and assist with landing of the same among policymakers, thought leaders, advocates and civil society
Assist in the development, maintenance, and deepening of relationships with NGOs, academic experts and other stakeholders so as to cultivate expert resources and third party advocates/validators needed by public policy, programs, comms, and other teams throughout Facebook
Work cross functionally with comms, public policy, marketing, product policy, security ops, engineering and programs to elevate influencer knowledge and understanding of all the work being done to ensure the online safety of our community, with particular emphasis on developing safety programs events, and presentations needed by the public policy managers in their efforts to influence policymakers, legislation and the like
Speak at major safety events and at online safety related meetings with policymakers as needed to communicate Facebook’s efforts regarding youth and family online safety, as well as develop and reinforce Facebook’s reputation as a leader in online safety
Minimum bachelor’s degree, or equivalent in policy, law, marketing, business, communications or a relevant subject or discipline required
Advanced degree a plus
8 years of experience in technology policy issues, as well as an understanding of applicable regulatory and self-regulatory regimes needed
Experience with the Internet technology industry preferred
Excellent knowledge of Facebook products, features, platform, and policies and operations for <18, as well as knowledge of online safety landscape is essential
Strong communication, analytic, organizational, and writing skills, proactive work ethic, and strong interpersonal skills needed
Demonstrated ability to work in a fast-paced environment, think and move quickly, juggle many different projects at once, find pragmatic and creative solutions to business issues, provide concise and business-focused advice, and make sound judgments under tight deadlines
Fluent in Portuguese and Spanish
Willingness to travel and to handle calls during different time zones

Occupational Safety & Health Implementation Manager Resume Examples & Samples

10-12 years’ work experience in safety-related roles with a multi-national manufacturing and/or distribution and logistics company, preferably food and beverage, consumer goods, or related industry. Experience in managing safety at the manufacturing and distribution center site levels, as well as implementation across multiple operations in multiple countries is preferred. Experience in managing operations is a plus, especially fleet operations. Significant travel and implementation experience with the countries of Sub-Saharan Africa
CSP, CMIOSH, NEBOSH International Diploma, or equivalent; similar Fleet Safety certifications or equivalent work experience
OHSAS 18001 Lead Auditor
Fluent in both English and French

System Safety Architect Resume Examples & Samples

Interface with customer (OEM/Tier1/System Integrator) architects to arrive at system level safety architecture
Define system level safety goals, safety requirements and associated safety architecture including hierarchy, interfaces and safety measures
Work with NVIDIA internal architects to partition system level safety requirements across reference platform, SOC and software
Derive system test cases for functional safety validation at system level
Guide engineering teams to perform system level safety analysis covering DFMEA (Design failure mode effect analysis), FTA (Fault Tree Analysis) etc

Software Safety Architect Resume Examples & Samples

Collaboratively work with system and SOC safety architects to define safety goals, safety requirements and associated safety architecture including hierarchy, interfaces and safety measures
Interface with customer (OEM/Tier1/System Integrator) architects and NVIDIA internal architects to partition system level safety requirements across hardware and software
Develop software architectural design that realizes software safety requirements
Prepare safety case inclusive of all safety evidences
Derive test cases for functional safety validation
Guide engineering teams during safety analysis covering DFMEA (design failure mode effect analysis), FTA (fault tree analysis) etc
Drive and coordinate safety processes implementation within Automotive software at NVIDIA
Support safety assessment / gap analysis of products against the ISO 26262 standards

Safety Sensor Engineer Resume Examples & Samples

Engineer will work with Safety Occupant Development engineers and Design & Release engineers to develop feasible solutions that ensure occupant performance meets safety requirements
Engineers in our team work on the calibration that decides if and when the airbags deploy in a crash event
Engineer team members are responsible for both a vehicle program and general core work involved in creating test plans, performing testing, leading calibration tradeoff discussions, and documenting strategy
Responsible for developing sensing and control algorithms/calibrations for global passive safety market, including front, side, rollover, fuel cutoff, and pedestrian protection crash events
Support vehicle level testing
Deliver fully validated and signed off safety sensor calibration
Generate test reports
Interface closely with suppliers
Bachelor of Science in Mechanical or Electrical Engineering
3+ months of experience in the automotive industry
3+ months of experience working with Matlab
Knowledge of signal processing, sensor technology, and control theory
Excellent communication skills with ability to demonstrate key points quickly and concisely
Experience in Vehicle Restraints or restraints electronic controls
Strong organizational and administrative skills
Strong problem-solving and conflict management skills

Fire Safety Director Resume Examples & Samples

Participates in the development and implementation of schedules, work processes, systems and procedures to achieve the department’s annual goals
Develops and recommends short- and long-term plans for building/facility fire and emergency medical services
Interprets codes, regulations and City/state fire and safety policies and ensures their implementation
Responds to fire alarms, plans and executes fire safety and emergency evacuation drills, conducts fire prevention and suppression programs and training, and monitors CCTV and emergency equipment
Three to four years of experience at the level of Fire Safety Director for a large commercial or residential facility or campus is required or a combination of direct work experience, training, and education
If position is based in New York, must possess a Certificate of Fitness for Fire Safety Director (issued by NYFD)
Must possess working knowledge of principles, practices and equipment in the field of fire science; principles and practices of the provision of emergency medical services and regulations pertaining to fire safety

Manager, Systems Safety & Reliability Resume Examples & Samples

A successful candidate must be capable of leading the technical effort to analyze systems and components for highly integrated Engine Systems and will work closely with the design teams (customer, internal and suppliers) to ensure that we meet safety and reliability requirements
The candidate must have experience leading model based, mathematical and statistical analysis efforts to perform Failure Modes and Effects Analysis (FMEA), Fault Tree Analysis (FTA), Time Limited Dispatch (TLD) Analysis, Fault Hazard Analysis (FHA), Mean Time Between Failures (MTBF), and System Safety and Reliability Assessment including calculating safety impacts and risk
The candidate will also participate in reliability testing of components, failure investigations, support root cause analysis, and be able to effectively present data to drive decision making within a multi-disciplinary team
The candidate will be responsible for analysis and approval of the safety and reliability impacts of hardware and software engineering changes along with new products
In addition the candidate will contribute to the continuous improvement of the system design process and will be responsible for identifying and implementing state-of-the-art methods and tools to enhance the group’s capability

Mgr, Workplace Safety Resume Examples & Samples

Investigates or arranges for all accidents and near-misses be investigated; prepares report of findings, including recommendations to prevent recurrence and implement approved course of action
Consults, analyzes, and recommends safe work methods to senior management relative to current and new programs and business
Supervises the performance of on-site inspections to audit physical conditions and safe work practices. Manages the research of codes,

Research Engineer Passive Safety Resume Examples & Samples

Master’s degree in Mechanical, Biomechanical, Civil or Aerospace Engineering
1+ years’ experience with finite element analysis methods or rigid body analysis using commercial codes (LS-DYNA, MADYMO)
PhD in either Mechanical, Biomechanical, Civil or Aerospace Engineering
Highly motivated and creative
Experience with commercial CAD software tools desired
Excellent communication and leadership skills preferred
A familiarity with global passive safety requirements, biomechanics, crash testing and automotive industry experience is desirable

Executive Director Production Safety Resume Examples & Samples

Manage 3 direct reports (Production Safety Specialist; Manager, Production Safety; Director, Production Safety, etc.)
Represents the CSEA / SEHS Department to the company’s motion picture, television and new media productions
Provides health & safety and environmental consulting services to the company’s motion picture, television and new media productions
Works independently without immediate management supervision
Mitigates any concerns by working directly with Production Executives, Producers, Unit Production Managers and other production staff
Develops and distributes the Production Injury and Illness Prevention Program (IIPP), and Production Safety Manual
Provide guidance and advice on production safety matters for other SEHS staff
Evaluates production sets, stages and locations for health & safety and environmental concerns
Responds to, and investigates production emergencies, incidents and accidents
Coordinates and/or conducts required employee health & safety training
Notifies applicable governmental regulatory agencies and authorities as appropriate
Acts as the designated company representative during regulatory agency inspections and investigations
Represents the company on the AMPTP Industry-Wide Labor-Management Safety Committee, Safety Action Team and Safety Bulletin drafting / revision subcommittees
Works in conjunction with Production Administration, Risk Management, Production Legal, Labor Relations, Sustainability and other company departments with production responsibilities
Provides back-up to the VP, CSEA and other SEHS department management as necessary
Federal, state and local health & safety and environmental regulations (OSHA, Cal/OSHA, EPA, etc.)
International health & safety and environmental standards
The motion picture and television production process including organizational structure, terminology, equipment, construction methods, stunt activities, rigging principles, special effects techniques, etc
Production employee supervision and motivation
Excellent written, verbal and inter-personal communication
Develop, implement and manage production safety and environmental standards, policies and procedures for productions worldwide
Determine the applicable regulations in states and countries where a particular production may be shooting (possibly for the first time)
Partner with risk managers, loss control executives and insurance underwriters to resolve loss prevention issues
Develop, implement and manage employee health & safety programs on a wide variety of subjects including employee health & safety training
Interact with regulatory agency inspectors, company management, productions, and studio personnel
Sony Pictures - CA - Culver City Area & Studios

Director, Risk & Safety Resume Examples & Samples

Assess and prioritize risks within Poshmark’s marketplace and users, including credit card fraud, account security, phishing attacks, spam, transaction fraud, referral gaming and chargeback prevention
Formulate long-term strategies and frameworks to mitigate risk through prevention and detection
Lead product strategy and manage the Risk & Safety roadmap. Implement, measure and iterate new features
Identify, evaluate and manage leading third-party risk services vendors
Develop workflows, write rules and spec product tools to enhance fraud team efficiency, minimize losses, and automate fraud detection and response, all while minimizing false positive friction on good users
Manage, grow and mentor the fraud operations team
Work across teams to proactively assess and address potential Risk & Safety issues for upcoming features
Foster a general community-safety focus throughout the organization
B.A. / B.S degree required, MS or MBA a plus
8-10 years of experience working in fraud, trust & safety, risk management, business operations, or a related field, past experience in product or risk analytics preferred
Strong execution and project management skills
Past experience managing a team
Passion for user safety and fighting fraudsters
Excellent judgement and communication skills
Proficiency in working cross-functionally
Collaborative personality, positive attitude
Strong analytics background, data-driven and detail-oriented

Embedded Software Safety Enginer Resume Examples & Samples

Responsible for understanding Safety Features and capturing practical application examples which utilize these Safety mechanisms
Work with internal organizations to understand Functional Safety Requirements (for all applications)
Interface with domain SMEs to understand overall system safety goals and system architecture
Capture development of safety concepts for systems such as Airbag, Electronic Power Steering (EPS), Powertrain and others
Integrate solutions into global (cross-domain) functional safety requirements, in the context of Embedded Software design (e.g. fault detection and mitigation strategies, etc.)
Prepare and present safety mechanisms in internal workshops
Understand ASIL decomposition strategies for devices and ECUs
Discuss and defend safety concept within various domains
Propose solutions for implementing safety operating systems which take advantage of device resources to achieve freedom from interference
Support specific safety items such as FMEA analysis, FIT estimation, etc
Understand and explain Safety Validation activity
Support audit of Safety Life Cycle and Hardware/Software design
Masters Degree a plus
Strong background in Microcontroller Hardware and Embedded Software development
Understanding of Automotive active safety systems requirements and specifications
Understanding of functional safety standard ISO-26262 especially relating to Hardware and Software requirements and System Decomposition
Safety Element out of Contect (SEooC) Analysis

Safety CAE Engineer Resume Examples & Samples

Professional position utilizing engineering education and experience to engage in the development and analysis of occupant performance in frontal impacts
Will be responsible for all phases of engineering, and will interact with other engineers on the safety team and safety department technical experts
Will be applying MADYMO or RADIOSS / LS-DYNA analysis codes during the evaluation and development of the frontal occupant restraint systems including: Seat belts; Driver airbag, Passenger airbag; Knee airbag; Knee bolster, Seats, Steering column and steering wheel
Will be utilizing FMVSS safety requirements and FMVSS safety test procedures in the analysis of frontal impacts simulations
Will request tests, support the execution of the tests and analyze the data and films
Will regularly produce development plans and status reports in the process of resolving issues and communicating results
Bachelor of Science in Engineering
3+ months of Engineering experience
1 or more semesters of experience utilizing FEA pre and post processing tools
Experience utilizing FEA pre and post processing tools
Experience in analysis of crash test data
Expertise in material properties
Coursework in FEA theory / application
Experience in applying DOE and optimization tools
Understanding of FMVSS / IIHS / ECE safety requirements
Successful candidate should be able to demonstrate leadership in One FORD (leadership) behaviors combined with outstanding interpersonal, team building, and communication skills

Safety Services Resume Examples & Samples

The position requires thorough knowledge of company products and product applications, merchandising programs, and/or warranty practices and procedures. Broad company knowledge and strong understanding of dealer operations is also required
The position requires a four year college or university degree (preferably chemical engineering or chemistry degree )
Thirteen to fifteen years of progressively responsible job-related experience including Experience in Oil and Gas, Mining, and/or Construction is a requirement
NPI experience
Excellent interpersonal skills are required in order to deal with sensitive issues, develop others, or persuade others inside and outside the department to take specific actions
Experience with Caterpillar dealers in the launch of new products or services is desired

EH&S Safety Manager Resume Examples & Samples

Managing the global safety programs related to internal standard practices and compliance
Leading global programs that focus on risk inherent to the activities our associates are exposed to in both field and manufacturing environments
Developing and deploying all safety programs across multiple international sites and businesses
Navigating international regulatory requirements
Developing and deploying design for safety criteria
Implementing initiatives that reduce potential for fatal and serious events
Conducting in-depth analysis of current injuries to outline future focus areas
Defining technical solutions to systemic safety risks, strong understanding of RCRA and lean principals

Facilities Manager Battery Safety & R&D Resume Examples & Samples

Create and maintain a safe and incredibly capable set of facilities to enable testing and validation of cells, modules, battery packs and related components under electrical, mechanical and thermal stresses
Create an amazing workspace without breaking the bank
Research new tools and equipment
Coordinate and support equipment repair
Ensure nightly and weekly checks
Improve and coordinate calibration routines
Periodic inspection including EPO, door switches, electrical grounding and high voltage isolation
Properly manage HAZMAT and various waste streams
Coordinate various logistics for movement of tools and samples
Work well with diverse set of people and skills
Experience with construction projects
Familiar with a wide variety of equipment
Safety conscious with experience in high voltage, flammable materials, hazardous materials, chemical hazards or related
5+ years related experience
College degree

Sled System Lead Technician Passive Safety Resume Examples & Samples

Configure, set up, and operate the test equipment
Prepare and set up test fixtures and test samples
Set up and position ATD (crash test dummies)
Install test instrumentation required
Install specialist high speed video equipment and lighting
Perform pre- and post-test measurements using a FARO arm
Perform post-test tear downs and inspections, document test Incident and report results
Prepare the post-test parts for engineering design review
Help in building sled fixture / buck, as required
Identify and store pre and post-test samples and components
Operate and maintain test equipment, support test equipment repair and improvement projects
Operate and maintain safe working practices and environment considering the safety of yourself and other employees at all times

Test Technician Battery Safety & R&D Resume Examples & Samples

Utilize specialized equipment to test and validate cells, modules, battery packs and related components under electrical, mechanical and thermal stresses
Perform complex destructive testing and gather data from a variety of sensors
Maintain test equipment and data collection tools
Perform periodic maintenance, calibration, repairs
Troubleshoot data acquisitive systems and sensors
Collaborate with other teams on sample build, preparation, instrumentation
Follow and edit standard operating procedures
Ability to perform tests on complicated systems
Experience with data acquisition systems
Strong computer skills and ability to learn new software

Specialist, Workplace Safety Resume Examples & Samples

Plans and executes National Recycling Program and other operational compliance reviews assigned by utilizing appropriate audit methodology when performing observations, inspections, tests and analyses, gathering evidence, and evaluating results
Inspects company facilities to assure the compliance with Comcast's National Recycling Program, as well as safety and fire safety standards set forth by the company and applicable government agencies. Completes written report on each inspection that clearly details observations (including root cause for issues noted), conclusions reached, and recommendations to Management in a well-organized manner utilizing Microsoft Office products (i.e. Word and Excel) as well as other Company systems
Efficiently tracks and validates the effectiveness of remediation activities undertaken by management on a timely basis
Inspect and observe mobile employees operating in community
Reports all safety discrepancies observed during inspections of facilities, vehicles, plant, customer service operations to appropriate management and recommend corrective action. Provides guidance to Management utilized to successfully implement process and procedure changes to minimize exposure to people, property and image
Perform field observations on Comcast field personnel. Apply risk avoidance and risk management decision logic to all levels of activity and communicate any violations of safety or environmental regulations and policies or suspected drug/alcohol use by employees to management
Inspect, measure gaps, and apply best practices to all DOT fleet management
Identify waste streams from Comcast facilities and work practices and provide guidance to management on how to coordinate disposal efforts
Stays current in emerging technologies and innovative practices
Pursue additional industry and business knowledge through training, continuing education, and certifications
Regular, consistent and punctual attendance. Must be able to work nights and weekends, variable schedule(s) and overtime as necessary. Must be able to travel out of town with overnight stays up to 70%

Safety Program Administrator Resume Examples & Samples

Construction worksite, office and manufacturing safety inspection experience
Prior interaction with regulatory agencies including OSHA
Knowledge of Cal-OSHA general industry and construction safety regulations
Understanding of industrial hygiene principles related to indoor air quality, chemical exposures, noise levels, etc
Familiar with ergonomic principles as they relate to a wide variety of workplaces
Basic understanding of Workers’ Compensation regulations
Computer proficiency in Microsoft Word, Excel and PowerPoint
Proficiency with iPhone and iPad equipment
Ability to conduct presentations and training classes to all levels of employees
Ability to organize and track many short and long-term projects at once
Must be able to work independently and collaboratively
Driving within Southern California is occasionally required

Global Process Safety Risk Management Lead Resume Examples & Samples

Master’s Degree or equivalent in Engineering or related field
Minimum of 10 years of experience working in a plant operations role (engineering, technical operations, project management and/or process safety management, etc.) with at least 2 years directing front line operations
Minimum 5 years operations or engineering management/supervision experience
Experience in PSRM and strong knowledge in international / industry Process Safety standards and leading practices
Experience in managing multiple sites at regional or global level
Knowledge of food industry technical challenges, construction project management skills, and plant maintenance and reliability knowledge
Proven success in deploying strategic initiatives/project plans
Proven ability to connect and influence a wide range of people from front line operations to business unit leadership
Demonstrated excellent verbal and written English communication skills
Experience in working within a multicultural environment

Fleet Safety Manager Resume Examples & Samples

Ensure drug & alcohol requirements are implemented as per the fleet safety policy
Ensure worker transport requirements are fulfilled across HSL operating units by doing inspections
Implement modified BBS programs as per the policy, Train the local management on modified BBS programs and ensure they are implemented accordingly
Remind the local management periodically and ensure awareness programs, campaigns are conducted on quarterly basis
Ensure rewards & disciplinary programs are implemented properly across all operating units
Ensure fleet maintenance programs, Technical inspections, daily pre-use inspections & safety inspections are properly conducted by line management by doing audits and verifications
Ensure all HSL fleets are having proper legal documents (like STNK, KIR, etc) as per policy
Ensure safety committee meeting and ERT established, and to facilitate coordination between them
Coordinate with estates and ensure hazard mapping (Bridges, culverts,etc) done for each estates and socialized with all operators and drivers
Ensure compliance monitoring (speed gun monitoring, Road block, c-track) are properly done at each locations as per policy
Ensure locations are in compliance with fatigue management requirements
Ensure road maintenance programs are executed as per budget by each location
Ensure the estates are doing inspections for bridges and culverts as per policy
Assist line managers to conduct traffic signs assessment for HSL roads and ensure signs are posted accordingly
Collaborate with local police and enforce traffic laws in HSL locations
Communications, Records and Reporting roles
Reporting to top management on the fleet safety performance for review, including recommendations for improvement
Ensure fleet safety performance report prepared (Include all key aspects from fleet safety policy) and submitted on time and complied with corporate standard as required
Prepare fleet safety pamphlet and/or newsletter on monthly basis
Undertake, and whenever applicable, lead auditing and compliance follow-up
Under the H & S manager leadership, to be the location representative in fleet safety matters as needed both internally and externally
Minimum 5 years related experience in Fleet Safety Program management, auditing and compliance. Deep knowledge in these programs and/or ability to achieve this knowledge level within 12 months
Minimum of 3 years working directly in the operating environment ideally in the estates or other industry. This experience must include a supervisory role (directly responsible for people leadership)
Ideally candidate has degree in a technical field and direct experience in the operating environment
Candidate must have English and Bahasa Indonesia language proficiency in writing, reading and speaking
Candidate must be able to present themselves well across the organization from the GM to labor and externally to government officials

High Risk Safety Product Mgr Resume Examples & Samples

Develop a strategic product roadmap combining the market demand with strong business/financial rationale
Conduct market research to understand customer needs and identify target segments/verticals/offerings
Track market trend and monitor competitor behaviors
Identify key portfolio gaps and roadmap to fill the gaps via localization and imports. Define the core SKUs, product positioning, manage life time competitive assessment
Build pricing strategy for the product line and plan pricing plan and report pricing result
Lead the NPI/VE/CE projects with functional teams (Sales, Engg, ISC) to fill the key product gaps
Interface global and regional product management teams
Train sales, technical teams and distributors on product features, value drivers, and sales pitch – prepare/package the relevant documents and test data to support the sales and specification process or project
Assist on-site projects on fall protection system installation design and installation
Diploma/Degree in Mechanical Engineering or related
Minimum 6 years of product marketing experience with demonstrable marketing knowledge
Candidate with prior experience in Safety products (Specifically Fall Protection Category), HSE, or key verticals of O&G, Construction, shipbuilding
Preference for outdoor work and must be physically fit as on-site outdoor work a requirement (Rigs, ships and construction sites etc)
Preferably have multinational experience: ability to effectively manage across the region
Demonstrated success in product development/launches and end-to-end execution of marketing strategies
Excellent written, oral, and technical communication skills, including presentation experience to large and diverse audiences
Self-starter, structured thinker, ability to work collaboratively across functions/regions, influence others, multi-task, and work with stretch goals and deadlines
Entrepreneurial, start-up, and business development skills an advantage. Strong MS office skills

Enivronment Safety Health Spec Resume Examples & Samples

Provides reports, interprets and develops/maintains policies and procedures to in support of ERLS programs
Responsible for providing command wide ERLS compliance inspections and tracking results, deficiencies, and corrective actions until all are closed
Responsible for maintaining ERLS inventories
Conducts Mishap Investigation reporting
Executes Hazardous Material Reporting procedures
Conducts Radiation / Laser Safety and Environmental training and awareness
Attend daily briefings, distribute information to subordinates, prepare briefings and reports as directed
Support managers in the execution of program related tasks such as project planning and execution, safety, and quality
Ensure implementation of program safety, security and quality control plans to the individual level

Senior Specialist, Safety Operation Resume Examples & Samples

Maintain overall responsibility for the compliance and quality of safety reporting requirements, as required for Marketing Authorization holders (MAH)
Manage and maintain active involvement in day-to-day individual case safety reports (ICSRs) reporting
Key responsibilities include collection, review and reporting of individual case safety reports (ICSRs) and ICSRs combined with product quality complaints (ICSRs+PQCs), obtained through the following sources: spontaneous, solicited, clinical trials, related research activities, local Competent Authorities and all other potential sources, to local Competent Authorities and Global Medical Safety/Office of Consumer Medical Safety, according to local regulations and company procedure documents
Undertake follow-up/investigation of local cases of special interest, e.g., fatal case, cluster ADEs, etc., as appropriate
Perform regular reconciliation activities as required by company procedures and local regulations
Ensure to report PSUR to health authorities in compliance with China regulations
Accountable internally for ensuring that the Local Operating Company meets procedurally defined timelines for management of safety information and any local regulatory agency defined timeline for submission of individual reports
Check and ensure the proper filing of the drug safety reports according to the company file management and retention policies
Provide specific ICSR processing training if appropriate
Education/training background
Knowledge/skills
Master and understand GCP
Good capability of communication, cooperation and teamwork
Ability of continuous learning to improve comprehensive qualities
Fluent spoken and written English, CET-6Drug & Product Safety Operations

IT Lead, Consumer Safety Systems Resume Examples & Samples

Partner with the Safety business community globally to manage overall IT demand
Define main drivers and requirements of initiated programs and projects
Provide cost benefit and impact assessments, feasibility studies and business case justifications
Determine and execute sunset strategies where required
Understand & articulate requirements / process efficiencies for business groups and identify IT Solutions to fulfill those requirements
Work with business partners to define the application strategic direction and application roadmaps in alignment with enterprise wide initiatives
Collaborate with business stakeholders, global and regional IT groups, Application Services, vendors that own and/or support these platforms to ensure the ongoing support and integrations of the current and future system and projects
Deliver continual improvements in application management and support processes
Ensure adherence to IT computer systems validation, SDLC, security and compliance requirements and provide audit support
Be able to work independently and on team projects, understand the relationship between technology & business, and translate business requirements into viable project solutions
Provide Service Management across in-scope systems
Report on monthly metrics, status updates and steady state
Effectively communicate and collaborate with diverse audiences (Business and IT) and at different levels within the organization
Act as a liaison between the business units and IT groups
Benchmark, analyze and make recommendations for the improvement and growth of processes and systems currently supported by BU IT
Lead implementation of IT solutions by coordinating overall project planning/execution and managing resources accordingly
Prepare and deliver regular updates and communications (verbal and written) to Business Groups and IT Leadership team, and extended business partners
Consistently demonstrate knowledge seeking and sharing behaviors across IT organizational boundaries in the performance of daily work
BA/BS degree with a minimum of 4 years of experience or an advanced degree with a minimum of 3 years of experience is required
Knowledge of SDLC methodology, 21 CFR Part 11, GxP and CSV frameworks and best practice models like GAMP are required
Strong IT and Business Analysis skills/background
Experience working in complex IT environments
Demonstrated process and systems design skills is required
Demonstrated leadership, influencing skills, and relationship management
Working with Business partners, Customers and Vendors
PMP Certification is a plus
Experience working with globally dispersed team members and business partners
Strong interdependent partnering skills
Strategy development and project management skills
Ability to successfully manage multiple issues and/or projects simultaneouslyBusiness Relationship Management

AP Cross Sector Safety Head Resume Examples & Samples

Oversee Pharma and Consumer product safety strategy, PV operational excellence and capability development in AP, in partnership with LOCs, local safety officers (LSOs) and other business partners in the region
Align business partners in the region including the commercial organization, medical affairs, research & development and other business partners and LSOs to develop and implement strategies and action plans that meet all applicable PV obligations. Build strong networks and collaborations with safety colleagues from all sectors in the region
Ensure Inspection Readiness: Proactively lead preparations for PV audits (internal or partner) and HA inspections. Facilitate the preparation and finalization of the response to audit/inspection observations
Coordinate all regional safety activities including policy and procedure development, implementing and facilitating compliance with Service Level Agreements. Oversight of AP safety staff and infrastructure
Develop and implement comprehensive training and quality program, in collaboration with the regional and local leadership and Pharma and Consumer safety partners allowing the LSOs to be inspection ready
Collect, analyze and remediate performance metrics for the region, in collaboration with Pharma and Consumer medical safety, regional and local leadership
Conduct and maintain ongoing PV risk assessment, with a robust strategy for remediation
Liaise with International PV Regional Heads in order to share best practices and knowledge
Raising the understanding of the strategic needs for PV in the region through
Regular and ad hoc communication with key stakeholders in the area
Building knowledge platforms for PV in partnership with other regions
Contribute to global efforts to develop an LSO retention strategy including, career path and opportunities for recognition and participation in the global PV community
Serve as a member of the regional Medical Sciences and Medical Affairs leadership teams. % OF TIME
BA in Technical, Business or Scientific Discipline required
Masters level or advanced degree in medicine, business, human relations or 9-12 years relevant experience in pharmaceutical, business development or other global regulated industry required in lieu of Masters degree
International exposure in Pharmacovigilance
Pharmaceutical Company or other relevant industry experience in the areas of regulatory affairs, quality, pharmacovigilance, business development and related areas required
Minimum 9 to 12 years of related experiencePharmacovigilance

Manager, Process Safety Resume Examples & Samples

Uses his/her experience, technical knowledge and interpersonal skills to work with individual sites (typically EHS, engineering, maintenance, and production personnel, and plant managers), SBU management, corporate or technical staff, and other stakeholders to implement process safety management initiatives
Identifies issues needing improvement, marshal’s resources to develop cost effective and compliant solutions, obtains management approval, and works with plant management, SBU management and corporate EHS to implement global initiatives. The incumbent is responsible for the identification, development, and delivery of various process safety and risk management training programs
Interprets and clearly communicates process safety information internally and externally
Provides expert advice by utilizing information to recommend appropriate internal risk management actions and scientifically sound positions that will be advocated for with external organizations
Manages process and organizational issues that are highly complex, use good judgment and provide sound guidance to the organization
Works with minimal direction as the incumbent exercises considerable latitude in determining objectives and approaches to assignments
Develops solutions which require use of ingenuity and innovation as it relates to overall global EHS strategies and parameters of specific SBU business plans
Ensures solutions are consistent with organizational objectives and have the ability to exercise judgment and make decisions in high levels of ambiguity
Implements decisions effectively and identifies emerging issues (such as regulation changes, etc.) within the region/globally and communicates them to affected parties, including SBU leadership
A Bachelor’s degree or above in engineering or a related discipline and a minimum of 10 years’ experience
Must possess knowledge of process safety and process risk management concepts, incident prevention principles, regulatory process safety and related environmental requirements as well as safety, environmental and loss prevention control principles
Must have a broad understanding of manufacturing processes, the ability to influence senior management or regulatory officials, and strong business acumen to be able to link initiatives to business objectives
Strong leadership skills to effectively drive innovation and change within the EHS organization with a successful track record of outstanding performance
International experience, experience in multiple business units preferred
Excellent interpersonal skills, including an appreciation of diverse opinions, backgrounds, experiences and cultural norms, in order to effectively influence employees, globally
A commitment to professional growth and development by participating in professional organizations related to process safety, learning about PPG businesses (strategy and operations) and understanding of industry norms

100

Safety Tech Resume Examples & Samples

Conducts safety inspections and integrates regulatory requirements and best practices with results from safety inspections and observations
Associates degree or certification from an accredited university or technical college
1 year of relevant work experience in the safety profession, fire science, building trades, or one of its specialties
Associate’s degree from an accredited college or university
1 year or more of relevant work experience in the safety profession, building trades or one of its specialties

101

Associate Safety Manager Resume Examples & Samples

Working knowledge of Cal/OSHA, CCR Title 8, Chapter 4 especially Subchapters 4, 5 and 7
Working knowledge of OSHA sections Subpart S, 1926, 1910.147, and 1910.269
Working experience with NFPA 70E- Standard for Electrical Safety in the Workplace
Working knowledge of NFPA 70 – National Electric Code
Experience in assessing electrical safety and technical skills of qualified workers
Ensure site supervisors are qualified in accordance with a formal qualification program and receive continuing technical training
Ability to maintain current knowledge of and interpret specific government agency requirements (statutes, regulations, licenses, and permits) and university policies
Working knowledge of the scientific and technical aspects of various regulatory requirements and potential impact on assigned work area(s)

102

Student Safety Monitor Resume Examples & Samples

Belief in the mission and values of KIPP
Prior experience working with children encouraged, but not required
Strong organizational skills, attention to detail, and oral and written communication skills
Ability to manage multiple priorities in a dynamic, fast-paced work environment

103

Safety Products Marketing Manager Resume Examples & Samples

Lead development and execution of annual Safety products portfolio business plan
Leadership on a cross functional team, working closely with sales, lab, manufacturing, and supply chain counterparts to achieve business plan metrics (Sales & OI)
Lead line-extension and upgrades of new product development programs and manage the cross-functional team through the NPI process from ideation through post launch
Collaborate closely with Shopper Marketing, Category Development Managers & Key Accounts teams to develop specific plans and programs to maximize growth
Develop consumer insights strategies and plans to address brand, product, & customer needs
Actively support key international subsidiary marketing teams
Conduct competitive analysis of direct and indirect competition
Participate in strategic and marketing planning that is tied to division objectives
Leadership on the cross functional team to achieve benchmarking consumer industry services levels
Bachelor's Degree or Higher from a accredited university
Minimum three (3) years of experience in Marketing
MBA or Master Degree in Marketing
Three (3) years experience project management and leadership of cross functional teams
Three (3) years of experience with new product development and launches
One (1) year channel marketing experience
Two (2) years experience working close to/with international subsidiaries
Strategic Thinker with high energy, positive attitude and passion for winning
Strong communication skills and demonstrates experience presenting to all levels of organization

104

Safety & Operational Risk Manager Resume Examples & Samples

As the head of function and a member of the JV leadership team, working with GM/DGM/peers to develop and drive the JV’s agenda on systematic operations across the organisation. This includes the development, implementation and maintenance of the system and the embedment of the system in JV’s business practice
Driving JV’s safety & operational risk management agenda. This includes hazard identification, risk assessment, championing risk management efforts and measuring progress. The risks here refer to all types of safety & operational risks, e.g. HSSE, fuels quality and quantity, engineering quality and related business & reputational risks
Defining and executing the functional strategies in the above areas taking into account of legal compliance, risk management and IOMS requirements
Providing functional support to the line on day to day business by leading the JV safety and operational risk team
Driving a culture of positive behavior around systematic operation, continuous improvement and risk management
Developing functional capability in these areas based on gap analysis and demand identification
Contribution is expected to be both strategic and operational. Ability to overseeing the strategic agenda in these functional areas and work with the business to drive lasting solutions is required
10+ years of experience in a large organisation, of which 3 years in senior management position
Excellent leadership & communication – to have the ability to articulate the safety and operational risk agenda, the individual will need to exhibit outstanding leadership, influencing and communications abilities in order to engage all stakeholders effectively
Experience in developing, implementing, operating and maintaining an operating management system is desirable
Proven functional expertise in HSSE, production/operation, engineering or risk management is desirable
Experience leading a direct and indirect team across different disciplines

105

Partner, UK Sustainable Safety Resume Examples & Samples

Leading the UK Sustainable Safety Practice with a focused on client development, developing teams to work on opportunities, building capacity and intelligence about the service offering, and including P&L responsibilities
Supporting the implementation of the company’s P&A Practice strategy as it pertains to Sustainable Safety
Supporting UK P&A Practice Head on the development and implementation of the P&A Practice strategy as it pertains to the Sustainable Safety taking into account differences in client and sector profiles across the business
Developing sales and delivery capabilities of the team within the UK with respect to Sustainable Safety
Supporting UK P&A hiring process as it pertains to the Sustainable Safety Practice
Leading on client business development meetings and collaborating with colleagues in the UK and globally on programme management and major proposals
Bachelor or Masters in HSE Engineering or similar qualifications
Minimum of 15 years’ experience managing and/ or providing consultancy in Health & Safety Programmes
Ability to engage with CEOs credibly but also work closely with supervisors and operators in the field
Proven ability to develop business with strong commercial skills
Experience in completing winning proposals and bids
Experience in line management and building/leading teams
Willingness to undertake both domestic and international travel
Competency assessment and training programs for behavioural change
Leadership engagement and coaching both at corporate and in the field
Fit-for-purpose management processes and technical standards for safety critical tasks
Leading indicators, metrics and information management to enhance the quality of decision-making
Major hazard identification and risk assessment to prevent accidents through broad-based organizational involvement
Managing incidents to mitigate consequences and learning from incidents, both good and bad, to prevent re-occurrences (experience and qualifications in accident investigation would be of interest)

106

Senior Engineer Safety Resume Examples & Samples

Ensure Up-to-date documentation (standards and guidelines/procedures/training modules)
Network steering team/subcommittee deliverables achieved
Participate in Audits of the relevant area of competency
Support audits of the area /plant they are responsible for
Conduct Safety Observation as per the target in their area of responsibility
Analyse the Safety Observation to arrive at actions to modify behaviours
Ensure participation in Risk Management programs (Hazard Analysis, Incident Investigation and control measures identification and completion
Impart training to enhance competency of the target group in the area of work
Participation in external Industry Bodies, trade association, Global Forums)
Plan and conduct Safety promotion to increase awareness in areas which need attention
Technical understanding of operations
Ability to coach
Persistence,
Analysis
Technical, Facilitation
Communication,
Interpersonal skills and political understanding
Strategic understanding

107

Senior Engineer Safety Resume Examples & Samples

Establish and maintain audit management system at JMD which includes audit planning, scheduling & monitoring of implementation of recommendations
Facilitate in providing safety related training in the subject of process safety and work place safety
Participate in the incident investigation process. Review quality of incident investigation report & LFI’s for circulation and learnings. Monitor implementation of recommendations
Review & updation of safety related standards/procedures
Budgeting of safety items and personnel protective equipments for every financial year. Monitor optimum utilization of allocated budget
Explore for the improvised quality of safety items and personnel protective equipments
Coordinate with other functions/ disciplines in ensuring conformance to applicable legal requirements
Competency development of subordinates through gap analysis and facilitation for training
Analyse audit recommendations and advice top management for implementation of safety measures
Ensuring timely & accurate submission of MIS
Facilitate & Monitor implementation of annual HSE plan at Site
Facilitate Risk management studies in identifying risks & their controls
Analysis of the incidents investigations & appraise the line management to avoid reoccurrences
Organize safety related campaigns to create awareness & improve safety culture at site
Good auditing skills for conducting Process, Work place & Contractor Safety audits. Analytical skill to analyse the audit findings
Knowledge on Process Safety Management systems in order to facilitate line management in its implementation
Competent in providing training on Process safety, Work place safety and Contractor Safety Management
Awareness regarding legal requirement w.r.t Safety and periodic reporting requirements to statutory authorities
Knowledge of Incident investigation process to identify root cause & framing of smart recommendations
Knowledge of IMS and carrying internal audits for continual improvement at site
Candidate should be B.E – Chemical/Petro-Chemical/Mechanical/Electrical/Instrumentation + PDIS – Post graduate diploma in industrial safety with 6 to 9 years of experience in Operations/ Safety

108

Lead-s&or Safety Resume Examples & Samples

Support Risk process implementation by facilitating periodic inputs on process safety risks and barrier health
Assist in providing independent view of risks and monitoring key risk management actions
Involve in developing self-verification protocol for risk management and establishing the process
Perform functional assurance for relevant group essentials
Actively involve in functioning of intersite network team for Risk & PHA
Conduct periodic monitoring and analysis of key leading and lagging indicators for risk and barrier health
Develop and maintain group-wide process safety requirements and mandatory practices in areas of PHA, LOPA, MAR and QRA
Prepare training content on relevant group practices and be part of central resource pool for delivering training
Provide expertise in risk assessment through participating and guiding teams at entities in performing risk studies
Maintain the e-tools for Risk and PHA across group and look for opportunities for application of new tools
Keep abreast about external developments on regulations, best practices, publications and provide inputs on upgrading RIL requirements and practices
Represent RIL by participating in national and international industry forums on Process safety & risk management
Prepare annual plans
Technically proficient in a areas of Process Hazards analysis and ability to lead/ facilitate studies
Able to work on e-tools (PHAST, PHAST risk, EXIDA, etc.) and interpret the results
Excellent interpersonal, influencing and decision making skills
Strong decision making capabilities
Interface with external & internal stakeholders
Self-motivated and organizational skills to be enable planning, execution and implementation in a timely manner
Proficient computer skills and data management (MS Office, data analysis and trending)
Facilitation of workshops
Achieve results through diverse cross-functional teams
A graduate (Masters Degree, B.E. or B.Tech.) in Chemical/Mechanical/ Instrumentation Engineering from a reputed university (or) Masters in Science from a reputed university with professional Safety certification
Minimum 8 years in O&M or Technical roles in Hydrocarbon/ chemical operating facilities or projects, with working experience in process safety domain
Process Hazard Analysis as a team leader or member
Qualitative and Quantitative Risk assessment techniques (Hazop, What-if, FMEA, LOPA , QRA)
Fire, Explosion and Toxic Consequence Analysis
Understanding of Management Systems (IMS, OMS and RMS)
Process safety elements (PT, MOC, PSSR, ERCP, II)
Safety Audits

109

Life Safety Principal Resume Examples & Samples

5 years of experience implementing life safety codes requirements in California
Certified Safety Professional (CSP) or Construction Health and Safety Technologist (CHST)
First aid and CPR training certifications
Fire Safety Director certification
Plan, manage, and control the activities of a team that provides operational support for a business segment, group or team
Provide support to emergency preparedness command system
Provide input and support to the design, development, review and implementation of innovative quality products, programs, services and solutions to support existing safety management systems, PG&E safety guidance documents ), and the safety goals of the organization
Develop and manage contracts, outside service vendors or others as required to support the safety programs of the organization
Work and interact with Cal-OSHA investigators while conducting serious incident investigation
Provide direction in the assigned area in support of business area objectives with short-term impact on functional goals
Set and achieve department goals in support of established objectives
Develop and implement work plans in support of department goals
Analyze, report, and provide recommendations and develops strategies to improve quality
Participate in employee selection, career development, succession planning and training
Utilize vision to think ahead to anticipate issues and provide solutions before they impact your team
Serve as a subject matter expert
Support and implement the S1/S2 process for safety

110

Safety Auditor, Expert Resume Examples & Samples

Bachelor's degree in the field of safety such Occupational Safety & Health, Environmental Management, Construction Management or related or equivalent experience
7 years of progressive safety experience in construction, utility, or relevant industry
Advanced knowledge of Cal/OSHA general industry and construction safety orders and other recognized safety regulations and standards (e.g., ANSI, NFPA, NEC, ASTM, Fed OSHA)
Advanced knowledge of risk assessment methodologies, processes and strategies
Advanced knowledge and experience tracking, trending, presenting and reporting audit results
Proficient computer and technology skills
Highly effective communication skills with the ability to lead client meetings, discuss issues and controls, and report on progress of work product with client manager, director, or project team
Ability to positively influence business owners on control solutions
Ability to work effectively as part of a multi-discipline team, mentor less experienced team members, within a fast-paced, results orientated department
Ability to express complex problems and control deficiencies in a business context
Experience in providing quality customer service and support in a professional and confident manner
Professional Certification (e.g., CSP, ASP, CHST)
Utility experience
Experience interacting with Cal/OSHA
Experience in conducting and evaluating complex root cause analysis investigations and evaluating the effectiveness of corrective actions
Experienced trainer
Experience with emergency response operations
Recognized and trusted as a knowledgeable safety professional
Conduct audits to Identify, document, monitor and report regulatory compliance and job site hazards present throughout Company work sites
Conduct audits to Identify, document, monitor and report Safety Management System (SMS) compliance
Supporting the development and management of corrective actions derived from audits
Providing expertise on the design of controls into new and existing business processes
Developing, tracking, trending and reporting program audit metrics
Building and maintaining effective relationships within all levels of our LOB’s

111

Nuclear Safety Basis Resume Examples & Samples

Act as a lead on less complex tasks and responsible for a portion of a design or section of an analysis or design review
Establish and maintain a filing system or databases as needed for tracking project status
Develop, maintain and produce technical documentation and system/subsystem specifications
Direct interface and liaison with customers at all levels from quotation to final design and test activities, design reviews and technical working group meetings to comply with requirements and specifications

112

Nuclear Safety Basis Resume Examples & Samples

Performs engineering calculations, prepares specifications, performs analyses, performs testing, issues reports and maintains related data
Maintains liaison with design and drafting groups
Prepares, reviews and approves drawings as required
Advises the Supervising Discipline Engineer about status of assignment(s) with respect to schedule, budgets, delays and adverse problems
Ensures quality, quantity and completeness of the assigned engineering tasks
Plans and schedules engineering efforts associated with assigned project
Maintains timely and accurate oral and written technical reports regarding assigned engineering activities
Keeps proper engineering files and records
Understands and uses computer software and applications associated with engineering assignments
Continually upgrades technical knowledge and capabilities and pursues additional coursework and training
Performs material take-offs for the discipline
Expresses ideas clearly and listens effectively to the ideas of others
Has basic knowledge of business development concepts and methods and provides support to proposals as required
Familiar with codes, permits and company cornerstone applications
Familiar with the work sequence, general content, and the methods used to generate specifications for the purchase of material, equipment, systems, services, or construction within engineer's discipline
Can read and understand construction drawings
Performs material take offs for a specific discipline
Can fully integrate constructability concerns into engineering solutions
Performs all other position related duties as assigned or requested

113

Site Safety Manager Resume Examples & Samples

Manages construction contractor safety and health program administration
Manages site safety, health, environmental, and security budgets
Implements, administers and maintains Drug and Alcohol Substance Abuse Program for a project
Conducts site safety and health inspections and safety and health program audits
Bachelor degree in Engineering
10+ years in a construction environment, 5+ years safety and health experience

114

Safety Case Engineer Resume Examples & Samples

The role is likely to include production of safety documentation under the supervision of a more senior safety case consultant. It is expected that you will be in roles that will involve direct interaction with clients
Applicants with relevant experience from other industries are welcome, as we can provide the relevant training to make the transition to nuclear
As a junior member of the team your career development will include project experience supported by training and development
As part of the Amec Foster Wheeler Safety Case community you will have access to training and mentoring that will allow you to develop your career in the Nuclear Industry. You will also be offered support to gaining professional accreditation with a suitable professional body as required
Technical or engineering background with a scientific or engineering degree or equivalent industrial experience
Experience within one of the following areas: Hazard identification, Radiological hazard analysis (HAZAN) production, Safety Case production

115

Mountain Safety Attendant Resume Examples & Samples

Promotes, educates, and enforces skier/rider safety through use of the NSAA Skier Responsibility Code and the Colorado Skier Safety Act by making daily safety contacts while skiing/riding or standing on variable mountain terrain in varying winter weather conditions
Documents issued safety contact warnings and suspensions using violator cards
Lifts and carries equipment including signs, baffles, padding, and toboggans
Reports medical incidents to ski patrol and directs skier traffic control around incident scenes
Communicates effectively with teammates and ski patrol in a timely and professional manner
Assisting with the lifting and loading of toboggans

116

System Safety Engineering Discipline Lead Resume Examples & Samples

Working with engineers throughout the organization, evaluate systems interactions across the entire propulsion system, to ensure designs incorporate the safety features required to enable certification
Support integration activities and reviews with internal and external customers, and air system contractors and certification authorities
Support P&W Integrated Product Teams, Chief Engineer, Airframe manufacturers, Suppliers, and Customers in reviewing, assessing, and influencing engine designs to optimize safety-related metrics and assure safety certification requirements (CFR 14 or equivalent Parts 33 and 25) or Mil-Std-882 are met
Mentoring and oversight of the work of junior safety engineering staff

117

Life Safety Installation Tech Resume Examples & Samples

This field position primary duty is to install, program, configure, commission and service Fire Alarm and Life Safety Systems at our client’s sites
Coordinate the installation activities with all trades to optimize installation time
Must be able to work on multiple projects simultaneously

118

Safety Process & Conformance Lead Resume Examples & Samples

Define processes to apply and track detailed set of metrics for implementing safety process requirements
Document and define criteria to translate safety requirements in to actionable items for engineering teams
Qualify ambiguous scenarios, analyze and document significant uncertainties in the environment and define failure cases
Generate reports and incidents of failures/escapes and drive RCCA for continuous improvement
Drive quality expectations and escalate whenever failures need management attention
Work with QA teams for test plan design, execution, review reports, failure analysis and assess overall quality and risk
Perform SW safety analysis (FMEA, FTA, DFA, FFI)

119

Safety Coordinators Resume Examples & Samples

Diploma in any engineering discipline
Possess at least 5 years working experience in HSE
Attended the WSH training
Prior experience in oil and gas industry an advantage
A self-driven and meticulous individual who has the strong ability to multi-task
Possess strong interpersonal, oral and written communication and organization skills
Highly motivated, well organized, resourceful and proactive
Possess good interpersonal skills with sound written and oral communication skills
Flexible approach and able to work under pressure with a can-do attitude and a desire to win
Ability to promote an open and informal communication environment that aims at growing mutual trust and teamwork

120

Head Safety Resume Examples & Samples

Safety management of the respective JMD site including projects under implementation and any new project
Auditing/Conducting Safety Observations Rounds in steady state plants, entering the same in Safety Observation Portal and generating statistical analysis reports for improving safety records of the Site
Applications for Licenses, Legal Approvals, Certificates including renewals to regulators for steady state plants and all related follow up actions
Timely reporting of all statutory reports like monitoring, OISD/ Legal third Party audits, compliance, etc
Conduct audits and follow up for closure of findings
Obtaining Factory Licenses, CCOE Licenses as per requirements of the new projects and any amendment’s required
Reviewing all Safety monitoring equipment/instrument in new projects as required for adequacy and technically evaluating all queries raised by the project team
Monitoring of new projects for safety compliances and supporting project team in HAZOPs
Compliance to all regulatory requirements w.r.t. petroleum products storage and transportation
Co-ordination with relevant regulatory agencies for ensuring smooth operations of the Jamnagar facility
Implementation, maintenance and strengthening of Safety as a part of IMS in all activities such as OHSAS 18001, ISO 9001, ISO14001
Co-ordinating for PSM performance, Standards, Procedures and Audits
Identify & Upgrade as per the regulatory norms to keep up with all the changes in regulations for both already enacted and future requirements
To facilitate training on HSEF, OMS requirements to employees and contractors
Reporting of incidents to regulatory authorities based on classification and further coordination with DISH
Budgeting and inventory management of safety function
Facilitate management reviews of HSEF functions through monitoring of Leading , lagging indicators, analyzing data related to audits, incident investigation recommendations, Mock-drill recommendations
Conducting various campaigns for awareness and strengthening of HSE processes and systems
Development of new procedures, guidelines and updation as appropriate
Collate, prepare and monitor HSEF annual plan
Sharing of global LFI
Review Risk Reduction Measures and prioritize for further reduction of Risk
Focus on felt leadership concept to improve safe work practices through involvement of senior management
Gap assessment and then develop competencies within the group
Develop succession plan for each role

121

Fleet Safety Manager Resume Examples & Samples

Reporting to top management on the fleet safety performance for review, including recommendations for improvement
Ensure fleet safety performance report prepared (Include all key aspects from fleet safety policy) and submitted on time and complied with corporate standard as required
Prepare fleet safety pamphlet and/or newsletter on monthly basis
Tropical Oils Asia Fleet Safety audit to be conducted twice a year per location
Externally
Self directed: able to understand the role of the job and be successful without high levels of direct supervision
Strong analytic, strategic and influencing skills
Ability and strong desire to implement, execute and follow-up a program

122

Occupational Safety & Industrial Hygiene Internships Resume Examples & Samples

Cumulative GPA of 3.0 or higher (Note: no rounding.)
Must possess a valid US driver's license
Availability to work various shifts commensurate with project requirements
Currently enrolled in a Bachelor's degree or Post Graduate degree at an accredited 4 year college or university majoring in Safety, Environmental, Industrial Hygiene or related major

123

Ap & Safety Mgr Resume Examples & Samples

Establishes priorities for retail stores in designated Retail Area to verify policy and procedure execution through various audits, promote Asset Protection and Inventory Accuracy Awareness through report and sales analysis in conjunction with District partners, assess the development of Asset Protection Team Members and assist in Internal and External Investigative efforts
Owns Professional Development of Retail Asset Protection employees and self through the successful on-boarding, training, recognition and coaching of Asset Protection Managers as well as Asset Protection Specialists in designated Retail Area. Educate and influence key business partners to include Area, District, Region and Store Leadership on Asset Protection and Safety focuses
In conjunction with District & Retail Leaders, prioritizes remediation plans for locations producing negative Safety results / trends and or lacking a strong Safety culture. Conducts Safety & Environmental audits to ensure programs are in compliance and provides coaching and direction Establishes and maintains partnerships with key law enforcement agencies to resolve complex investigations & response to critical incidents. Directly impacts shrink and awareness through integral partnerships with Regional Leaders, Retail Area Managers / District Managers, DC partners, Store Leadership and Cabela’s Investigations team in designated Retail Area.as needed
Establishes and maintains partnerships with key law enforcement agencies to resolve complex investigations & response to critical incidents. Directly impacts shrink and awareness through integral partnerships with Regional Leaders, Retail Area Managers / District Managers, DC partners, Store Leadership and Cabela’s Investigations team in designated Retail Area
Responsible for the management and execution of the Area Asset Protection budget for designated Retail Area

124

Safety & Industrial Hygiene Manager Resume Examples & Samples

Bachelor’s degree in Engineering/Science Safety or or related technical field
Experience in High Hazard and complex petrochemical manufacturing experience
Minimum of Three (3) years of progressively more responsible work experience in safety related management or line leadership with safety emphasis
Preferred, Certified Industrial Hygienist (CIH) certification or CIH eligibility or Certified Safety professional (CSP) certification / CSP eligibility
Experience in high hazard process manufacturing environments

125

Kevlar® SHE Senior Consultant Process Safety Management Resume Examples & Samples

BS or higher degree in engineering and/or safety related discipline
At least 10 years of experience in a manufacturing environment
Experience with and knowledge of Process Safety Management (Corporate Standards S21A and S25A)
A currently DuPont certification as a Process Hazards Analysis Leader
Demonstrated leadership skill and experience
Self-motivated with strong interpersonal and organizational skills to independently complete tasks and works well in a team environment
Demonstrated written, oral and analytical skills
A continuous improvement mindset
Ability to collaborate and network across site, regional and corporate resources
Experience 1st and/or 2nd Party PSM auditor
Knowledge and experience with OSHA 29 CFR 1910 and EPA 40 CFR Part 68
Six sigma certification, black belt preferred
Membership in a professional safety organization

126

Manager Process Safety Resume Examples & Samples

BS or higher in chemical engineering (preferred) or other engineering discipline
Minimum five years’ experience in a chemical manufacturing and/or engineering organization. Some experience in the process safety function is preferred
Ability to communicate (speak and write) in English
Good presentation and communication skills
Experience in hazard review participation and leadership for both operating plants and engineering designs
Experience in incident investigation and root cause analysis
Knowledge of the elements of process safety management
Familiarity with the performance of process safety management audits at existing operating sites
Familiarity with regional (Asia) process safety regulatory compliance requirements
Familiarity with regional or global industry organization standards and guidelines
Experience with applying cost effective approaches to process safety issues to unique, non-standard, complex engineering designs and plant retrofits
Experience in implementation of practical risk control measures to acquired facilities
Experience with the use of qualitative and quantitative risk analysis tools such as fault tree, layer of protection analysis, and dispersion modeling software such as PHAST to engineering designs
Ability to communicate with colleagues remotely, including teleconferences during off-hours

127

EH&S Process Safety Lab Specialist Resume Examples & Samples

Design experiments and assemble and operate complex systems to achieve desired project goals
Maintain detailed records of experiments and data acquisition
Perform data reduction and calculations as required for data presentation and interpretation
Prepare written reports documenting tests performed and results
Process/evaluate test requests, incoming chemicals and samples, perform sample preparation and required safety reviews
Maintain equipment through rigorous preventative maintenance and calibration
Maintain chemical inventory and ensure lab waste is disposed of properly
Supports safety initiatives to improve company programs and achieve compliance with required regulations
Bachelor’s degree in Chemical Engineering, Chemical Engineering Technology or other related technical degree (i.e. Chemistry, Mechanical Engineering) is preferred. Experience in a chemical laboratory, chemical pilot plant or chemical manufacturing is advantageous. In lieu of degree some post secondary education in chemistry or chemical engineering along with 5-10 years’ experience working in a chemical laboratory, chemical pilot plant or chemical manufacturing setting may be considered
Experience working with hand and power tools
Ability to obtain a New Jersey “Grade H” permit to use explosives
Experience or understanding of electrical metering devices
Working experience with compression fittings various types of tubing. (stainless steel, copper) would be beneficial

128

Process Safety Management Engineer Resume Examples & Samples

Bachelors of Science degree in Chemical Engineering or Mechanical Engineering
Knowledge of safety and health and environmental codes and regulations required
5+ years of experience working as a PSM engineer, or in engineering or operations supervisory role with knowledge of PSM covered processes, OSHA PSM regulatory standards and requirements
Process and mechanical body of knowledge and knowledge of the PSM covered process and ability to lead Process Hazard Analysis
Ability to train in all areas of safety and health
Computer skills: Proficiency with word-processing and spreadsheet applications required (MS Word & Excel preferred) Computerized Maintenance Management System (CMMS), and Document Control Software

129

EH&S Safety Manager Resume Examples & Samples

Previous experience in EH&S in a corporate or regional function at a fortune 500 corporation Experience managing a global EH&S programs across international operations preferred
Strong leadership, organization and project management skills. Ability to communicate and work with all levels of the organization
Demonstrated understanding of standard EH&S reporting methods and metrics
Experience in field service or construction operations desired

130

Reliability, Maintainability, Safety Manager Resume Examples & Samples

Lead a world-wide team of Electrical and Mechanical RMS resources, coordinating RMS engineering activities with all phases of the new product development and product support
Develop and maintain SIS product standards, training systems, processes and best practices and then ensures consistency between all sites
Identify and implement system level RMS improvements and metrics at all SIS sites
Coordinate and manage global RMS workload and scheduling requirements for to meet operational needs
Serve as a consultant to all functional areas for RMS discipline
Gather requirements and needs from multiple teams to be used in defining SIS processes and procedures through all stages of product development
Provides and reports the health metrics that supports compliance with the UTC Code of Ethics, UTC Export requirements and policies and procedures
Act to facilitate teamwork and communication across the sites and all of UTAS
Hire, train and mentor support staff
Manage employee performance review process
Facilitate teamwork and communication across the sites and all of UTAS
Master of Science Engineering Degree is a plus but not required
Experience with avionic/aerospace products preferred
Related aerospace industry experience preferred
Familiarity with RTCA/DO-160 and MIL-STD-810 is a plus

131

Disneyland Occupational Safety & Industrial Hygiene Resume Examples & Samples

Assist with audits, report findings and develop corrective action plans
Conduct field surveys and develop JSA’s to determine site-specific safety requirements such as equipment specifications, machine guarding requirements, personal protective equipment, and training
Maintain documentation
Ability to work flexible hours; occasional 2nd and 3rd shift according to business need
Ability to climb ladders, occasionally work at heights, work in low light conditions
Safety, Environmental or Industrial Hygiene in a Bachelor's degree or Post Graduate degree at an accredited 4 year college or university
Junior, Senior or Graduate Student
Cumulative GPA of 3.0 or higher (Note: Please, no rounding.)

132

Lab Safety Associate Resume Examples & Samples

Oversees safety and health issues and has the authority to stop or modify unsafe operations/practices within or outside the scope of the Incident Action Plan, notifying the Manager of actions taken
Conducts regular safety audits of facility and teammate compliance
Award-winning education and training across multiple career paths to help you reach your potential
Performance-based rewards based on stellar individual and team contributions
Dedication, above all, to caring for patients suffering from chronic kidney failure across the nation
BS/BA in related field, Industrial Hygienist, or appropriate combination of education and experience
At least three (3) years Lab or Hospital experience as a safety officer- preferred
Previous experience managing projects ranging from simple to complex, including projects with several sub- teams
Ability to coordinate projects and teams not geographically co-located

133

Clinical Safety Associate Resume Examples & Samples

Process domestic and foreign safety reports received from assigned studies, according to ICH-GCP guidelines, regularity requirements,
Collaborate with internal colleagues from Operations, Regulatory and QA, Data Management, CEC, and Scientific Staff (this is done to
Manage department service standards and turnaround times related to processing submission to the sponsor, expedited reviews, and query
Bachelors degree required
Degree in Nursing, Pharmacy or health-care related field preferred
3 years drug safety experience or in a clinical trial related position required
Working knowledge of ICH/GCP Guidelines
MedDRA/WHO Drug Coding is strongly recommended
Demonstrated high level proficiency in MS office products (Word and Excel)
Preferred but not required proficiency in Adobe Acrobat and EDC applications
Sound attention to detail
Strong sense of responsibility and an ability to work autonomously, as well as act as a strong team player
Displays ability to understand established procedures and communicate those procedures to others
Sound ability to communicate effectively in a matrix environment
Solid written and oral communication skills

134

Healthcare Safety & Reliability Regional Project Manager Resume Examples & Samples

3+ years of experience with healthcare program management and administration
Experience with Microsoft Office, including Word, Excel, PowerPoint, and Outlook
Ability to facilitate in-person and virtual meetings with clients
Experience with the military
Possession of excellent leadership, analytical, and data management skills
BA or BS degree in a healthcare-related field preferred; MA or MS degree in a related field a plus
Project Management Professional Certification
Maintenance of a Current Clinical Licensure, if applicable

135

Project Safety & Reliability Engineer Resume Examples & Samples

Performance of reliability and safety assessment activities associated with the defined role to achieve the timely substantiation of the designs to enable them to enter passenger service
Support the development and production of National or European standards and processes for the management of reliability and safety to ensure that the future development of Company objectives and activities are appropriately aligned and acceptable
Provide a source of expertise and advice to other members of the Product Safety and Reliability Dept and the project in relation to project safety and reliability matters
Provide technical expertise in Safety and Reliability Engineering
Professional Organisation Membership is an advantage
Problem solving skills, ability to coordinate
CSM, Requirements definition, Reliability Centred Maintenance (RCM) – prognostics and diagnostics
Concepts for compliance with safety and reliability requirements
Hazard logs/records
Compatibility Assessment (GMRT/8270)
Requirements management tools and process (DOORS)
SIL Assessment
Cost Benefit Analysis (CBA)
Reliability growth modelling – including Duane Modelling
Fault tree analysis (FTA) methodologies and tools inc. dependent failures and human reliability
Fault Reporting and Corrective Action Systems (FRACAS) techniques, tools and processes
Fault condition testing
HAZOPII (Product, Operation and Maintenance), HAZOPI
Functional FMEA, Failure Modes and Effects and Criticality Analysis (FMECA)
Electrical schematics

136

Monorail Safety Manager Resume Examples & Samples

Manage the investigation of accidents, major incidents and near misses to determine root causes
Oversee the preparation of accident/incident reports, recommend system modifications and other corrective actions
Submit report findings as required by regulation and contract to PANJ (Port Authority New Jersey
Direct quantitative risk analysis and engineering analysis, including fault tree and failure modes
Effect analysis regarding HSE, safety critical systems and systems safety critical interfaces
Follow through with action plans to address issues or concerns
Ensure that safety management systems monitoring, and systems safety program plans are current, relevant, and effective
Perform qualitative hazard analysis and risk assessments of operating conditions
Identify risks associated with Newark AirTrain operations or equipment and recommend mitigation methods
Work closely with Systems Engineering and the SDC Directors to design out risks and verify the effectiveness of the program
Perform assurance activities of overall safety program at the Newark Airtrain (operational safety, HSE)
Provide appropriate safety training to all levels of staff within the SDC’s
Interface with all levels of the SDC and Divisional staff in support of achieving and maintaining a world class safety culture at the Newark AirTrain
Independently initiate new programs and procedures in support of that objective
You hold a Bachelor's degree in Engineering, Occupational Safety or in other relevant field
You cumulate a minimum of ten (10) years of System Safety or HSE experience
You possess experience in the rail industry preferably, or in aviation, maritime or highway transportation
You are results driven
You are customer service oriented
Your teamwork skills and flexibility are strong
You have high concern for quality and accuracy
You have excellent English communication skills both written and spoken

137

Healthcare Safety & Reliability Performance Management Expert Resume Examples & Samples

5+ years of experience with leading safety performance measurement and improvement in healthcare
5+ years of experience with providing data analysis and data visualizations, including dashboards and graphics
5+ years of experience with serving clients and stakeholders of large organizations
Possession of excellent leadership and meeting facilitation skills
MA or MS degree in a healthcare, safety, or performance management field preferred; PhD degree in a healthcare, safety, or performance management field a plus

138

Manager of Facilities & Safety Resume Examples & Samples

Working with leadership, sets the strategy and oversees the Safety and Facility initiatives for the site
Directs the Safety and Facility staff at the site by direct line reporting
Advise the President, VP/GM, and Safety/Facility staff about development of safety programs, site strategy for process development, investment in safety and manufacturing risks with solutions
Ensures that safety objectives and performance standards are understood and owned by management while engaging employees as active participants in their safety through initiatives such as Behavior Based Safety
Oversee facility layouts, process design, safety equipment and development consistent with the stated platform strategy for safety/facilities
Work with individual site leader and finance to prepare a capital expense plan for direct expenditures
Leads management teams in frequent review of Safety Programs, Measures and recommends changes to goals and objectives
Support the Management of the transformation projects between the sites
Support and lead activities for preparation of PFMEA and training to improve and implement
Direct accelerated safety/facility related improvements for 5S, flow and linkage, RTPR to enables safe flow of material while reducing turnaround time and cost
Identify staff positions required to improve process technology know-how, safety and FPY, add or train as appropriate
Maintain the highest ethical standards, even when challenged from above
Understand and live by Esterline’s ethics and business conduct policies
Experience in EH&S and facilities management
Detailed knowledge of PSM regulations, PHA applications such as FMEA, HAZOP, safety program best practice
Functional understanding of lean and lean transformation application history
Project leadership skills and demonstrated large project management history
Bachelor’s degree in engineering, Safety, or a related area
At least 10 years of operations management experience
At least 5 years of management experience directly responsible for Safety
Automotive, Aerospace, or equivalent lean application experience
Project transformation (i.e. site relocation) experience
U.S. citizenship or Permanent Resident Alien Status required

139

Safety Tech Resume Examples & Samples

Performs Safety Assessments, audits and training
Reviews SOP requirements
Issues and monitors hot work permits, confined space entries, and lockout/tag out permits
Ensures Safety systems performance
Investigates accidents/incidents/near misses and prepares accident reports
Assists in emergency situations
Coordinates with facility Engineers on safety programs
Monitors the facility industrial hygiene program
Provides oversight of Safety Programs such as the Respiratory Protection Program, Lockout/Tag-out Program, and Confined Space Entry Program
Tests noise levels
Tests air flows of process exhaust system
Conducts personal air sampling
Prepares samples for analyses
Trains employees on safety and health requirements to ensure compliance with OSHA and DOD regulations
Oversees field activities and monitors for health and safety violations
Enforces use of PPE and other critical safety equipment
Monitors decontamination of personnel leaving hazardous work zones
Develops and monitors emergency action plans to comply with the Disaster Response Plan and the Emergency Planning Right-to-Know (EPCRA) Act
Identifies potential causes for accidents and recommends changes in policies and procedures to prevent accidents and illness including reviews of near misses
Assists Management to prepare the EHS budget
Tests conductive floors and building grounding systems to comply with the DoD Surveillance Standard for Lightning Protection
Complies with and maintains ISO 14001 system
Proficient with computer applications required
Performance of other duties as assigned
Maintains the highest ethical standards
Understands and conducts himself/herself by Esterline’s ethics and business conduct policies
Knowledge of safety rules, regulations and procedures, company equipment, facility capabilities and manufacturing operations
Capable of training in all areas of Safety assessments, audits, SOPs, and New Hire Training
Must be able to follow written and verbal instructions and work without close supervision
Must have the ability to effectively present information to top management and public groups
Must have the ability to solve practical problems and interact with a variety of concrete variables in situations where only limited standardizations exist
Associate’s degree from accredited university or current enrollment in a 2 year program preferred
2 – 5 years related industrial, explosive pyrotechnic, environmental related experience and/or training, or equivalent combination of education and experience. DoD experience is a plus
Forklift certification, CDL license, CPR certification, First Responder Training, Hazardous Safety Certifications

140

Safety Design Engineer Resume Examples & Samples

Identifies specific software modules or functions associated with the hazard cause, identifies hazard elimination and hazard control methodologies and associated software safety requirements, and verifies that the inhibits and controls incorporated to eliminate or mitigate hazards are effective
Perform software safety-critical assessments based on governments and civilian safety standards
Ensure that software requirements specifications clearly identify the software safety requirements
Familiarity with hazard analyses, such as fault tree analysis (FTA), functional hazard assessment (FHA), safety assessment reports (SAR) and system safety hazard analysis (SHA) a plus
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD

141

Clinical Safety Associate Resume Examples & Samples

Possession of a Bachelor’s degree from an accredited college or university in a field related to biomedical research, clinical trials, health or four (4) years related experience in lieu of degree
Foreign degrees must be evaluated for U.S. equivalency
A minimum of two (2) years of clinical nursing experience or equivalent with prior clinical trials and/or safety reporting experience preferred
Must be proficient in all functions of clinical research implementation processes and conduct
Knowledge of regulatory requirements and guidelines for facilitating clinical human subjects research (including Department of Health and Human Services regulations)
Familiarity with protocol and informed consent documents and approvals needed to initiate a study
Ability to work in a clinical research setting, both independently and within a team, to coordinate, negotiate and facilitate program goals
Ability to prioritize multiple tasks and projects while establishing timelines, tracking milestones, and dealing with shifting priorities
Ability to submit quality products under tight deadlines
Ability to communicate effectively, both orally and in writing, with non-technical and technical staff
Ability to travel occasionally
Protocol development in quality and assurance
Bachelor’s Degree in Nursing
Navigation of protocol life cycle experience

142

Safety Technical Specialist Resume Examples & Samples

Provide technical leadership to the Safety team by defining the Safety Case Strategy, developing safety methods and sharing expert level knowledge
Approve the System Safety Plan and ensure the safety activities are in accordance to company’s process, best practices and applicable standards
Develop and maintain safety management process and guidelines and best practices, and promote company's safety policy
Education and technical background in electronics, computer science or electrical field (minimum B.Sc. or equivalent)
Minimum 10 years’ experience in a safety assurance role in safety critical systems - aerospace, train control, medical, nuclear or automotive
Extensive experience in safety methods and techniques: FTA, FMEA/FMECA, HAZOP/HAZID

143

Safety Engineering Specialist Resume Examples & Samples

Perform safety design, analysis, modeling and simulation to specify and verify train control systems developed at Thales are safe to operate
Analyze and evaluate designs to verify compliance with safety requirements
Perform peer review of key safety deliverables and artifacts
Review of all Safety Risk; Safety Hazard; and Pending Hazard SCRs related to their product and/or projects to ensure consistent and thorough assessment and analysis by Project Safety Specialists, and to ensure safety defects with broader implications are cloned and managed correctly
Represent Safety in technical meetings involving safety-related issues. Participate in, influence and approve design decisions impacting or potentially impacting safety. Attend the bi-monthly Systems Technical Review for their respective Product and/or Project areas
Review of the Hazard Log and associated Hazard Analysis performed on the CBTC equipment
Trains, leads and supervises more junior members of the Rams Engineering Group
Identify with adequate anticipation risks and opportunities and propose mitigation actions
Prepares system & subsystem safety requirement specifications, interface requirements and test requirements by analyzing and decomposing customer requirements
Technical trade off evaluations is performed to identify the system safety engineering design choices with associated advantages and disadvantages
Evaluates the compliance and safety of designs with safety engineering requirements by review of technical specifications, designs & designs changes for both HW and SW, and suggests design alternatives where appropriate to enhance safety based on knowledge of design feasibility & the safety requirements. Represent RAMS engineering, and provides evaluations & recommendations with respect to safety in formal design reviews
Define safety requirements by evaluating & defining railway operational hazards that could be caused by the ATC system
Failure Modes Effects & Criticality Analysis (FMECA) - Fault Tree Analysis (FTA), and
Hazard Analysis - Event Tree Analysis - Operating & Support Hazard Analysis (O&SHA)
Supervises other Safety Engineers and consultants by defining their work, coaching them on how and what to prepare, monitoring their progress, and directing them on priorities
Supervises consultants by defining their work, coaching them on who and what to prepare, monitoring their progress and directing them on priorities
Resolves safety related issues by participating in the Safety Committee, as required
Ensures that safety can be verified. Approval of test documentation
Prepares Safety Reports that document that Project Safety requirements have been met. Safety test procedures & test results are reviewed and checked to confirm compliance with the requirements. Software process records, operational restrictions and safety analyses are similarly reviewed, checked and identified in the report
Reporting directly to the Manager RAMS Engineering, having direction from the Group Lead RAMS Engineering and Technical Safety Specialist, and work closely with other team members, both inside the Safety team and from other functional teams, to meet the project objectives
B.Sc. Electrical Engineering Computer Science or equivalent
More than 5 years train control experience and/or automatic control in the other industry, such as aircraft, industry. i.e. related field
Works with the Systems Engineering Dept. and other departments as a team player with the view that others are your customers
Defines work methods and techniques for more junior group members
Manages and schedules daily activities within budget & time allowances given
Participate in engineering activities ensuring the "built-in safety" of our communications-based train control systems. Utilizing internationally recognized hazard and safety analysis techniques, you will assist in the development and follow through to completion the formal Proof of Safety for specific project applications of our products
Be part of a team that is responsible for the timely and effective execution of the combined tasks and activities of safety management and safety engineering to achieve the system safety requirements throughout the system life cycle

144

Engineer System Safety Resume Examples & Samples

BS in Electronics Engineering and/or Computer Science or equivalent with a minimum of 7 years of Systems and Software Safety Engineering experience or a Master’s Degree with minimum of 5 years of experience in Systems and Software Safety Engineering with a background in Avionics
Extensive experience with requirements development, system/software architecture, Hardware/Software design, software code implementation, test, verification and validation such as those used in primary flight displays, flight control computers, etc
Must have a history of demonstrated leadership capabilities and work independently
Must have excellent presentation skills
The ability to obtain a Security Clearance is required
Aviation/Avionics certification/experience. Familiarity with requirements tools such as DOORS, software test tools, etc
Experience following Military systems safety and software process standards and their Industry equivalent such as: MIL-STD-882, DO-178B/C, DO-248, DO-254, ARP-4754, ARP-4761, etc
Team and/or Project Leadership experience
Currently active DoD Secret clearance
Experience in Proposal Writing and creating Basis of Estimates (BOEs) for new business capture efforts

145

Site Safety & Health Lead Resume Examples & Samples

Maintains knowledge of jurisdictional, company and client HSE requirements and standards; reviews present and proposed work practices to ensure they are in compliance with established standards; investigates accidents to ascertain causes for use in recommending preventive measures and developing HSE program revisions, as necessary
Works independently in determining objectives and approaches to assignments
Implements HSE Program for project location
Interfaces with project and corporate management, clients, subcontractors and relevant government agencies
Serves as a project resource for the technical interpretation of health and safety requirements
Possesses the ability to work with Jacobs project team, client, and subcontractors to influence positive outcomes
7+ years’ of experience required in construction lead health and safety role, preferably construction of large industrial buildings with stringent installation requirements
Experience required working on client property, with the ability to manage client interactions, both schedules and unscheduled
Experience and ability to author health & safety plans and procedures required
Advanced technical training and/or BS in HSE related field required
Advanced HSE certification is preferred
HSE Program implementation required, implementation of Jacobs HSE program is preferred

146

Traffic Safety / Tsm&o Engineer Resume Examples & Samples

Registration as a Professional Engineer (PE) in the State of Florida is required
Bachelor of Science degree from a U.S. accredited 4-year University in Civil Engineering
Minimum of 4 years of Traffic Engineering and/or Intelligent Transportation Systems (ITS) work experience
Knowledge of the concepts, terminology, principles and analytical techniques of traffic engineering and traffic flow theory
Knowledge of Transportation System Management and Operations (TSM&O) concepts, terminology, principles and practice
Knowledge of Department project development process including funding, design and Construction Engineering / Inspection (CEI) functions
Knowledge of business plan development and implementation
Knowledge of contract management
Skilled in developing and making presentations
Skilled in the use of computer applications such as word processing, spreadsheet, presentations applications, e-mail and internet
Skilled in traffic engineering studies and analysis, guidelines and standards
Ability to analyze and interpret engineering data
Ability to communicate effectively, verbally and in writing

147

Safety Laboratory Test Technician Resume Examples & Samples

Associate in Automotive Technology or related field of study
Experience in an occupant safety testing facility and performance testing on airbag and safety restraint systems
Equipment experience includes operation of: HYGE or Servo sled, Tinius or Instron, airbags and safety restraint systems
Mechanical and electrical knowledge, welding experience (MIG, TIG, Arc), basic machine shop / fabrication experience

148

Associate Administrator for Hazardous Material Safety Resume Examples & Samples

Establishes and maintains effective liaison and coordination with other Federal departments and agencies, State and local governments, and non-government standards-setting bodies, regarding hazardous materials transportation as they relate to the hazardous materials safety program
Provides technical representation on behalf of the United States before international bodies charged with setting standards for the safe transportation of hazardous materials (e. g. International Civil Aviation Organization (ICAO)
Monitors and maintains liaison with international bodies which establish international standards affecting hazardous materials transportation (e.g. Organization for Economic cooperation and Development (OECD) to ensure consistency of the U.S. position
Conducts public meetings and distributes information written matter from other nations to stakeholders in connection with participation in the activities of international hazardous material standards-setting bodies
Develops hazardous materials safety training policies and programs. Maintains and distributes training courses and other instructional materials for government and industry personnel. Develops, maintains and distributes emergency response instructional materials. Provides technical assistance and support in hazardous materials transportation safety to State and local governments in their efforts to enhance public safety
Maintains technical capability necessary to provide day-to-day support for the regulatory, international standards, exemptions, approvals and interpretations programs. Conducts PHMSA planning for hazardous material advanced research and development program
The Associate Administrator for Hazardous Materials Safety participates fully in PHMSA policy determinations falling within his/her assigned responsibilities and issues guidance for approved policies within his/her delegated authority
Expert level ability to provide operational and strategic leadership at the National level for a complex geographically-dispersed organization. Experience establishing agency strategic plans and program policies to enable mission success
Skilled collaborator with experience coordinating with executive level counterparts in other Federal agencies, officials of state and local governments, the Congress, OMB and representatives of industries, organizations and related businesses
Experience in leading the development of long-range planning, budget formulation and execution, and extensive knowledge of personnel and financial management regulations and policies
Complete a one-year SES probationary period (unless already completed)
Complete a Public Disclosure report, OGE-278. You will need to provide the information annually

149

Safety & International Lead Resume Examples & Samples

Manage and conduct audit activities associated with pharmacovigilance and clinical trial safety
Ensures the appropriate corrective and preventative actions are completed in a timely manner
Identifies any potential systemic gaps raises to management and assists with the implementation of remediation
Audits include but are not limited to internal systems/processes, vendors, licensing/distribution partners and Local Operating Companies
Serves in an advisory/consultative capacity in compliance related safety matters
Provides support to Pharmacovigilance (PVRM) in implementing corrective and preventive actions
Works with other R&D QA&C functional areas to perform root cause analysis of safety related compliance issues
Participates in metrics and trending activities in collaboration with the Quality Operations group
Supports the activities of the preparation, hosting and responses to regulatory agency inspections for pharmacovigilance-related inspections

150

Safety Auditor, Expert Resume Examples & Samples

7 years of progressive safety experience inconstruction, utility, or relevant industry
Advancedknowledge of risk assessment methodologies, processes and strategies
Highly effective communication skillswith the ability to lead client meetings, discuss issues and controls, and report on progress of work product with client manager, director, or project team
Ability to workeffectively as part of a multi-discipline team, mentor less experienced team members, within a fast-paced, results orientated department
Experience in providingquality customer service and support in a professional and confident manner
Advanced knowledge of key PG&Eorganizations and their potential exposure to safety and health risks
Conduct audits to Identify, document, monitor and report regulatory compliance andjob site hazards present throughout Company work sites

151

Construction Site Safety Manager Resume Examples & Samples

Function as site Safety Professional for assigned construction project. Act as an active, onsite resource for all safety related questions, concerns and areas of improvement. Provide Governance and Oversight of EPC Contractor
Manage site observation program and associated data collection and trending
Maintain site safety related documentation including: training records, orientation records, contractor safety statistics, and incident records and reporting
Attend and participate in all project meetings that have a safety component. Deliver daily safety message at Plan of the Day meeting. Resource topic material for weekly All Hands safety meeting and present as necessary. Participate in contractor safety meetings and initiatives
Manage site owner regulatory responsibilities of a multi-employer worksite
5 or more years of field experience with Safety as the primary function
Professional Certifications - CHST
In-depth knowledge of OSHA Regulations
Experience working with limited supervision
Strong computer skills, including knowledge and proficiency of Microsoft Office Suite
Professional Certifications (CSP, OHST, CHST)
Bachelor’s degree in Occupational Safety or relate field

152

Manager, Production Safety Resume Examples & Samples

Represents Security, Environmental, Health and Safety (SEHS) and the Production Safety Group to SPE’s motion picture and television productions
Evaluates production concepts, scripts, pitches, etc., for health & safety and environmental concerns
Mitigates any concerns by working directly with Production Executives, Producers, Unit Production Managers (UPMs) and other production staff
Attends production technical scouts and production meetings on a national and international basis
Fosters long-term, cooperative and trusting working relationships with key production stakeholders nationally and internationally (Producers, UPMs, union safety representatives, etc.)
Distributes the Production Injury and Illness Prevention Program (IIPP), and Production Safety Manual, and provides consulting support to Sony productions as they implement the IIPP
Recommends corrective actions and assists productions in their implementation
Acts as the designated SPE representative during regulatory agency inspections and investigations
Works in conjunction with Production Administration, Risk Management, Production Legal, Labor Relations, Sustainability and other SPE departments with production responsibilities
Provides back-up to the Senior Vice-President, Corporate Safety & Environmental Affairs; Executive Director, Production Safety; and other CSEA / SEHS Management as necessary
Provide guidance and advice on production safety matters for other Corporate Safety and Environmental Affairs (CSEA) and SEHS staff
Manage the day-to-day duties required to implement the Production Safety Program and IIPP via set / stage / location visits, review and management of safety documentation completed by productions. This responsibility requires domestic and / or international travel and weekend / night work, depending on production schedules. Completion of this task requires the ability to quickly interpret general industry and construction safety requirements and apply them to the motion picture production environment
As the key SEHS contact on selected productions, review production scripts, participate in location scouts, attend production meetings and interact with production management and other production personnel to determine and mitigate health & safety and / or environmental issues associated with the production
Recognize health & safety and environmental issues on production and mitigate these issues with tools including exposure monitoring, hazardous materials assessments, water / air sampling, structural evaluation, etc. This generally requires management / direction of third-party consultants to perform these tasks, however, in some instances the monitoring may need to be conducted in-house. Tasks performed in-house generally include small–scale personal exposure monitoring, noise assessments, etc. Contracted tasks performed by engineers and consultants include building hazardous materials assessments, water / air quality analyses, structural evaluation, etc. Based upon the results of these evaluations, the Director, Production Safety recommends, communicates and manages the response actions while serving as a liaison between the consultant and the production
Investigate safety-related incidents (accidents, near misses, employee concerns, etc.) to determine cause and develop recommendation and corrective action to prevent further injuries. This requires a good working knowledge of a variety of health & safety-related government regulations, the Production Safety Manual and other internal policies when appropriate
As required, conduct health & safety training for production personnel. Typical training includes heat illness, fall protection, respiratory protection, confined space entry, lockout / tagout, aerial lift operation, etc
Serve as SPE representative for interactions with various regulatory agencies including Federal OSHA, Cal/OSHA, state health & safety and environmental agencies, local fire departments, etc. Serve as a liaison between productions and these agencies. Typical agency interaction includes obtaining regulatory approval for certain production activities such as building occupancy, pyrotechnics, other special effects, certain stunt activities, etc. Unscheduled agency inspections related to compliance issues and incidents are also included
Respond to production safety needs and other SPE safety / security emergencies as necessary. Completion of this task may include night or weekend availability, unscheduled travel and / or modification of personal schedules
5+ years of experience in Safety Management
3-5 years in entertainment preferred
Knowledge of Federal, state and local health & safety and environmental regulations (OSHA, Cal/OSHA, EPA, etc.); International health & safety and environmental standards
Knowledge of the motion picture and television production process including organizational structure, terminology, equipment, construction methods, stunt activities, rigging principles, special effects techniques, etc
EPA-AHERA Asbestos Inspector accreditation preferred
Certified Industrial Hygienist (CIH) certification preferred
Production supervision and influencing of safety culture
Implement and manage production safety and environmental standards, policies and procedures for productions worldwide
Inform key studio and production executives of potential safety and environmental issues associated with productions and provide advice and solutions for these issues
Quickly recognize and resolve various production safety issues that arise during the course of normal production activities
Implement and manage employee health & safety programs on a wide variety of subjects including employee health & safety training
Availability to respond to production needs and other emergencies

153

Healthcare Safety & Reliability Regional Project Manager Resume Examples & Samples

Collaborate with client leads and a project management team and subcontractor to coordinate logistics for safety and reliability implementation site visits, data collection, and online trainings at military healthcare facilities within a geographically dispersed region
Complete safety and reliability trainer training and deliver onsite training
Provide regular project status briefings, including reporting on past and planned activities, identified risks, and mitigation plans
Serve as the primary client contact in the field and anticipate and identify client issues and concerns
Maintain awareness of broader project progress and goals, communicate updates regularly, and disseminate project resources and materials to client leads
Collect and analyze data on the success of safety and reliability implementation within a region and report results to client leads and a project management team
Basic Qualifications
Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information

154

Representative, Clinical Safety Resume Examples & Samples

Prepare packets from source documents and submit packets for event adjudication to CEC (Clinical Event Committee), IMR (Independent Medical Reviewer) or internal review
Review adverse event notifications and case report forms received from the investigational sites in the electronic database to support Safety Officers in daily safety review
Prepare adverse event and/or complaint review forms for Safety review
Report complaints from clinical studies to Complaint Handling incorporating information from multiple sources, in accordance with regulatory requirements, trial safety processes and Edwards procedures
Request source documents from study sites for event adjudication
Reconcile data and maintain/update in-house safety tracking systems for sponsor’s review, complaint reporting, source documents collection, and adjudication process
Associate's Degree or equivalent, required; Bachelor's degree preferred
2 years of previous related working in clinical studies required
Good computer skills including MS Office Suite, Adobe, and ability to operate general office machinery
Good written and verbal communication skills and interpersonal relationship skills
Substantial knowledge and understanding of Edwards policies and procedures relevant to clinical study documentation
Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint and electronic data capturing system (e.g iMedidata)
Good problem-solving skills
Must be able to work in a team environment, including inter-departmental teams
Ability to provide feedback in a professional, direct, and tactful manner

155

Supvy Transit System Safety Spec, GS Resume Examples & Samples

Experience with national rail/transit policy development and implementation
Experience establishing and directing teams whose work involves organizational resources, requires changes in established procedures, and includes interaction with other organizations
Experience in safety promotion and the Safety Management System (SMS) as it pertains to the rail/transit industry, with direct experience leading change in industry-wide initiatives

156

INL Safety Manager Resume Examples & Samples

Provide safety advice to top management and propose corrective actions on safety related issues as needed
Ensure safety-related documentation and records are available and up-to-date
Responsible and accountable for providing effective support to aviation safety specialists and line managers to ensure the success of the safety management efforts
Identify and monitor safety and environmental hazards, risks, and promote the reduction or elimination of potentially hazardous conditions that may lead to accidents, occupational injuries, illnesses, deaths, and safety-related financial losses
Coordinate all safety related activities within the requirements of the safety program with respect to mission requirements and the U.S. Government directives to ensure regulatory compliance
Report and investigate aircraft, ground safety, and environmental accidents to determine the cause of the accident and formulate recommendations to help prevent similar mishaps in the future
Detailed data entry of technical information necessary in assisting in the monitoring of mishap reports to ensure accuracy and completeness
Ensure proper industrial safety procedures are followed in accordance with the contract and appropriate Federal, state, and local regulations, rules, and procedures
Provide written reports which are clear, concise and meaningful for all ground aviation safety and environmental matters
Provide technical support in all types of Safety Environmental issues such as data gathering, training, correspondence with CONUS and OCONUS internal customers, etc
Develop required reports, conduct briefings, safety training, and when directed conduct quarterly safety and semiannual safety stand down meetings
Assist in maintaining accident and incident records, files, and reports. Requires data entry and corrections to files on an as needed basis
Conduct safety audits and inspections of safety related equipment as needed
Process Safety Hazard Reports including investigating the hazard and ensuring mitigations are in place
Conduct other tasks as identified by the Director of Safety
Perform duties as an active member of an aircraft accident board, when needed
Coordinate first responder duties during an onsite accident, when needed
Performs routine OCONUS travel and within CONUS travel as required
B.A./B.S. degree from a four year college or university in a related field
Must be a FAA commercial Instrument rated pilot either in Fixed Wing or Rotary Wing
Formal training in OSHA, EPA, and hazardous waste storage and handling and disposal procedures
Graduate from a DOD Aviation Safety and Accident Investigation or FAA, NTSB or accredited university aircraft accident investigation course
Minimum five (5) years experience as an Aviation Safety Officer/Manager
FAA Commercial Pilots License Instrument, with at least 1,500 hours of in aircraft flight time
Proficient in Microsoft Office Word, Excel, Access, Powerpoint Project and Visio
Training & Development - Completes required & suggested training; shows eagerness and capacity to learn; receptive to coaching & feedback
Expense Management - Plans budget appropriately, uses sound judgment; analyzes operation for improving expense efficiency; demonstrates knowledge of financial process & results

157

Director, Clinical Safety Management Resume Examples & Samples

Translates business vision into broad and actionable strategies for Safety Management across all therapeutic areas within Clinical Development
Responsible for clinical study safety processes related to adverse event including coding in MedDRA and medications in WHO and the planned data capture, analysis and trending of safety data in search of safety signals within clinical trials, pregnancy reporting processes for clinical trials, laboratory review narratives for CSR. Investigator/CRO safety training
Proactively identifies, evaluates, develops and implements global clinical safety process and system improvements in support of clinical trials
Responsible for quality and compliance, interpretations of industry guidelines and management of Safety Review and Coding functions. Review and comment on draft regulatory guidance
Develop staffing model for Safety Management, standardize clinical safety training, compliance and quality assessments and provide change leadership for technology and process improvement organization of >100 healthcare professionals
Ensure that clinical SOPs reflect evolving global regulations and processes related to clinical trials and that they are being followed
Provide clinical safety perspective to management and Pharmacovigilance and Patient Safety. Responsible for quality and compliance for Safety Management organization
Ensures appropriate interfaces with all involved functional areas are identified and in place for timely and efficient collaboration
Responsible for the impact on AbbVie if the Safety Management organization doesn't deliver, including, potential safety risks, risks of Regulatory Agency citations, potential delay in the development of clinical documents, that might result in regulatory submission/approval delay which may lead to millions of dollars in lost opportunity (major impact on financial goals) for AbbVie and major impact on public safety

158

Senior Associate Global Safety PV Resume Examples & Samples

Process adverse event cases and report them to the Health Authority
Triage literature and measure taken information and send it to assigned vendor
Review the contents of global periodic reports (e.g., DSUR, PBRER) from the headquarters and draft corresponding local periodic reports
Provide review and QC of safety data in study and product documents for regulatory submission
Translate safety case data between English and Japanese as needed
Process safety case data in the safety system
Serve as a point of contact for day-to-day issues management for assigned vendor
Communicate individual case processing and regulatory submission timelines to assigned vendor
Support audits and inspections
Support the senior PV staff on full range of safety activities
Understanding of local regulatory requirements for pharmacovigilance
Competence in safety systems and medical coding
Reading and written communication skills in both Japanese and English
General understanding of industry practices and standards
Experience with MS Word, Excel, PowerPoint, and Outlook
Master’s degree and 1 year of directly related experience

159

Global Safety Manager Resume Examples & Samples

Execute the medical review of ICSRs (narratives, coding, expectedness, causality and seriousness) to ensure quality reports. Produce medically accurate ICSRs reports
Execute medical triage for appropriate causality assessment on ICSRs and timely regulatory reporting
Execute ICSR case escalation to Senior Medical Reviewer as appropriate
Execute appropriate case follow up per SOPs
Support medical coding conventions, data collection methods, and systematic process improvements for AE processing
Support training to Amgen employees on ICSR medical review
Participate in SAT as requested
Provide expertise and guidance on teams for interdepartmental and cross-functional initiatives including, process improvement standards development, SOP/MAN creation, and metrics with regards to medical review and case management
Perform other duties related to the position as necessary as defined in Standard Operating Procedures or as requested by his/her supervisor
Nursing degree
Knowledge of Amgen Case Management and medical review SOPs and pharmacovigilance regulatory requirements for pharmacovigilance
Clinical knowledge of therapeutic area patient populations and drug class
Proficiency in technical safety systems including Safety Database and medical coding
Knowledge of safety data capture in Clinical Trials and Post Marketing setting
Knowledge of clinical trials and drug development
Knowledge of Amgen products and patient population

160

Safety Physician Resume Examples & Samples

Manage collection, in cooperation with a PV scientist, of current data for safety signaling and identify and investigate safety signals
Conduct analysis of safety data
Ensure adequacy of recording, summarizing, and handling of adverse events for investigational and/or marketed Biogen products including decisions on seriousness, expectedness, and causality
2) Provide safety strategic leadership for clinical development programs / program teams
Integrate the safety scientific component to build a strategic framework for clinical development plans
LI-EU4
Preferably has prior experience in clinical development or drug safety

161

Safety Physician Resume Examples & Samples

Accountable for proactively drafting and implementing an EU+ strategic plan in collaboration with EU Medical and Regulatory Affairs for EU+ geographies
Safety content of local labels: Responsible for labelling activities in EU+ geographies; GSO should be consulted on changes to labelling not consistent with core labelling; Signatory of safety content of local labels in EU+ geographies
Point responsible for SABR content of responses to product regulatory queries originating from EU+ geographies. Will work in coordination with GSO and PV Scientist to align on response strategy and authorship responsibilities
Core RMP and EU-RMP: Responsible for the generation of the core and EU RMP for new product/indication filings with support of Epi and Medical Writing. Responsible for post-approval maintenance of core RMP and EU RMP for assigned product
Post-authorization safety studies and other assigned studies in EU+ geographies: Responsible for overseeing and a signatory for PASS in EU+ geographies. Accountable for input on protocol design, ICF Safety content, study life-cycle activities including participation in interim and end-of-study CSR activities; Attends assigned study SMT meetings as appropriate
Interface/Interactions
Minimum 5 year experience in the pharmaceutical industry or clinical care setting
Demonstrated experience in drug safety (minimum 3-5 years) which includes prior direct interactions with EU and ROW regulatory authorities (EU experience strongly preferred)
Demonstrated ability to lead and collaborate within highly complex organizations, across functions and geographies
Preferably has prior experience in clinical development

162

Safety Systems Analyst Resume Examples & Samples

Accountable for developing, maintaining , troubleshooting and improving the company's safety systems and project specific data tracking I maintenance tool
Responsible as System I Database Administrator for technical support, maintenance and continued development I implementation of systems and tools for internal and clients
Ensure proper documentation including workflows for applications, tools, audit readiness and Medical & Safety Services representation at audits
Generate and develop quality and performance metrics I KPls on all processes as well as reports and analysis where safety systems are used
Maintains and enhances technical knowledge in all relevant areas as well as in global development
Keep management aware of potential & actual issues. Assist developing solutions
Has supported, or worked on projects for, a Pharmacovigilance system at a Pharma co, a CRO, or a related services company for 3 years or longer
Experience (3 years plus) with either Argus Safety or ArisG as either an administrator/super-user, or on a technical basis
Experience with working in a validated/GxP compliant environment
Can demonstrate experience in at least one of the following - either with technical or business-level involvement: Analytics/ad-hoc reporting in Argus or ArisG
Expedited reporting (especially E2b reporting to EMA or FDA)
Supporting regulatory inspections or customer/supplier audits
Excellent written and verbal communication (English)
Experience of international/global working environment

163

Executive Director, Medical Safety Resume Examples & Samples

Establish/enhance robust surveillance and benefit-risk processes based on clinical and scientific expertise to support Jazz products across the lifecycle
Management of physicians and scientists in the Medical Safety group including recruitment, training, mentoring and development
Establish risk management process starting early in development. Work with clinical teams to develop risk management plans to support Jazz regulatory submissions
Oversee signal management and risk management of Jazz products on a global basis across the life cycle
Provide medical safety oversight for assigned Jazz product(s) including medical review of ICRS, signal management and risk management across the life cycle
Lead PVC committee for assigned products
Work with clinical counterparts as needed, including review clinical study protocols, development plans and serious adverse event handling
Provide scientific expertise and contribute to the design and oversight of PV observational safety studies and PASS studies
Communicate and interact effectively within and across therapeutic teams, and within functional team management as appropriate
Provide pharmacovigilance support for internal and external customers
Provide medical and scientific expertise on pharmacovigilance matters affecting the preparation and submission of timely and accurate information to the regulatory authorities
Represent Jazz pharmacovigilance at regulatory meetings as needed
Work with labeling team to accurately portray the safety profile of assigned drugs or biologics
Provide the training, leadership and continuing education for all departmental staff
Liaise with clinical/medical counterparts across the business to provide PV expertise as needed
Ensure the QPPV is included and supported in the Jazz PV governance structure and is informed of emerging safety issues that impact the Benefit Risk Assessment of Jazz products

164

Director of Pharmacovigilance & Safety Resume Examples & Samples

Performs medical assessment of individual case safety reports including seriousness, expectedness/listedness, causality and additional follow up for both post-marketing reporting system and clinical studies
Author and/or review and approve all aggregate safety reports including PSUR, DSUR, RMP/REMS, and response documents to inquiries from world-wide regulatory agencies
Responsible for safety aspects of clinical trials including evaluation and interpretation of appropriateness of safety monitoring and information collection in protocol and case report form, safety findings for Investigational Brochure, clinical study reports, summary of clinical safety, risk and benefit assessments and product labeling in regulatory submissions
Leads safety signal management throughout product lifecycle including signal detection, validation, evaluation and development of risk management strategies
Serve as safety expert on inter-departmental teams including, but not limited to, patient safety impact arising from deviation from product quality specification, such as Health Hazard Evaluations and Corrective Action and Preventative Action Plans (CAPA)
Communicates effectively and efficiently on safety and benefit-risk issues to internal and external stakeholders
Leads or contributes to projects and/or process improvement that support overall safety functional strategic objectives. Contributes to the mentoring and on-boarding training of new colleagues. Develops and maintains comprehensive and current knowledge of the assigned product portfolio and safety reporting and surveillance regulations
Develops and maintains inspection readiness for medical assessment activities and assists in internal and external audits/inspections for Pharmacovigilance and Safety as needed

165

Director, Clinical Safety & Risk Management Resume Examples & Samples

Support product development activities via Risk Management and Safety Teams and Product Development Teams and other related sub-team participation, including participation in internal and joint internal/external research project teams relevant to the development of new compounds, and the further study of marketed compounds
The CSRM Principal Scientist may work closely with a cross-functional group of experts in Epidemiology, Regulatory Affairs, Statistics, and Manufacturing to manage safety topics under evaluation
Duties include all aspects of Safety Data Evaluation, including assessing safety from a variety of sources, e.g. clinical trials, literature and post-approval use and ensuring completeness of safety information in worldwide package circulars
Responsible for Safety Surveillance activities such as signaling reviews using medical judgment in review of individual cases as well as overseeing the medical judgment of other staff
Risk Management activities such as contributing to recommendations for PV actions and making recommendations for labeling
Ensuring that the safety section of our product circulars are medically and scientifically appropriate
Analyzing and summarizing the findings from available safety data to support decisions
The CSRM Principal Scientist may supervise the activities of CSRM Staff in the execution of safety data analysis and medical writing
Responsible for the development of worldwide post-market risk management plans, pharmacovigilance strategies and risk minimizations activities as warranted
Minimum of (3) years Clinical experience after completing education
Must have excellent written and verbal communication skills as well as analytical skills
5 – 10% Travel

166

Director, Clinical Safety & Risk Management Resume Examples & Samples

Minimum three (3) years Clinical Experience, Clinical Oncology experience preferred
Experience in drug safety, pharmacovigilance and/or risk management
Industry experience desirable in both an investigational and post-marketing capacity
Must have excellent communication, writing and analytic skills

167

Specialist, Safety Resume Examples & Samples

Assist in the development, implementation and maintenance of the corporate wide Environmental, Health and Safety (EHS) management system; and its implementation at each facility
Facilitate the sharing of programs, procedures, tools and successfully demonstrated practices within the organization
Provide technical and regulatory expertise to ensure compliance, safe work places, and continuous improvement of EHS programs
Track trends and reporting for EHS KPI’s
Assist facilities in Process Hazard Analysis activities, technical reviews of process changes, incident (safety and/or environmental) investigations and root cause analysis
Responsible for developing effective working relationships with site management, employees, and the EHS community to drive continuous improvement in EHS performance
Bachelor’s degree in Environmental, Health, and Safety, or related field and 2 years of manufacturing experience OR Associates Degree in an Environmental, Health, and Safety, or related field and 3 years of manufacturing experience
EHS technical and regulatory expertise
Excellent organizational skills, including ability to multi-task and prioritize workload
Ability to work effectively with minimal supervision
MS Office proficiency
Bachelor’s Degree in an environmental, health, safety, or related field
Occupational Safety/Industrial Hygiene experience strongly preferred
Experience implementing/maintaining management systems (e.g. ISO14001, OSHAS 18001)
OSHA 30 Hour
Certified Hazardous Materials Manager (CHMM)

168

Records Analyst, Safety & Shared Service Resume Examples & Samples

Working knowledge of retention guidelines and relevant records and information management
Understanding of ARMA International's Generally Accepted Recordkeeping Principles (GARP),
Maintains records systems and procedures to facilitate the orderly retention and disposition of

169

Spv-safety Resume Examples & Samples

Ensure the implementation of Accident Prevention Plans (APP)
Actively promote and support the health and safety programs at project sites
Oversee the completion of Activity Hazard Analysis (AHA) preparation and acceptance
Facilitate health and safety training for Company staff, subcontractors, and any parties required to participate to ensure achievement of exceptional health & safety performance including developing training content and delivering course information
Author health and safety related documentation (reports, logs, records, and site specific risk mitigation plans), completing required information for daily reports and client communications in a timely and accurate manner
Ensure that all documentation is organized and uploaded to the project portal
Provide oversight to subcontractors, clients, and project team members to ensure that project activities are completed according to applicable APP(s)
Conduct regular inspections to assess health and safety plan adherence as well as identify potential loss and risk
Take appropriate actions to prevent loss and mitigate risk in accordance to company standards and practices
Ensure that deficiencies are corrected in a timely manner and to acceptable measures
Represent the Company in a positive and professional manner in client and regulatory agency interactions, serving as the primary point of contact for site health & safety
Collaborate with Project Managers to ensure that health and safety activities are incorporated effectively into project plans
Report health and safety incidents to the Company Incident Database
Conduct related investigations thoroughly, completing associated documentation accurately
Ensure implementation and documentation of corrective actions
Verify implementation and close-out corrective actions
Review of qualifications of subcontractors
In addition to the accountabilities above, other responsibilities, tasks, and deliverables may be assigned to the incumbent of this position
The ability to communicate in written and oral formats with diplomacy and tact
An aptitude for exercising independent thinking and reasoning
Demonstrated success in teaching others health and safety concepts and requirements
Skilled in leading others without formal reporting authority
Proven knowledge of US Army Corps of Engineers EM 385 1-1
Competent in using Microsoft
The SSHO shall have extensive knowledge in the Army Core of Engineers EM-385-1
The SSHO, as a minimum, must produce a copy of their instructor-signed OSHA 30- hour training card (or course completion if within 90 days of having completed the training and card has not yet been issued). They will have completed

170

Passive Safety ORC Resume Examples & Samples

A minimum of a Bachelor of Science degree in Mechanical or Electrical Engineering or equivalent (Materials /Chemical/ Civil/ Aerospace/Computer) from an ABET accredited university
1 or more years of experience of Product Design of FCA ORC/sensors
Experience with FCA warranty analysis for Passive Safety systems
Experience with FCA Electrical Engineering Development Process (EEDP)
Experience in FCA electrical system requirements and Change Management system

171

Software Engineering Co-op-safety Electronics Resume Examples & Samples

Strong Microsoft suite skills including PowerPoint, Excel and Word
Strong sense of urgency and personal commitment
Possesses excellent written and verbal skills

172

Director, Life Safety Resume Examples & Samples

Minimum fifteen years of life safety and loss control experience, with increasing levels of responsibility
Working knowledge of both operational (real estate and retail) and construction life safety processes and protocols
Inquisitive and curious nature with a desire to learn as much as possible, contribute to a dynamic and interactive team environment, and proactively seek out knowledge in relevant subject areas
Analytical skills and ability to assess a myriad of operational risks and exposures and develop risk mitigation and loss control strategies
Strong written, verbal, organization, communication and presentation skills a must. Comfort in presenting to senior executive management on a wide range of life safety issues is a must
Good project management skills and the ability to effectively multi-task and manage complex operations, prioritize and meet deadlines
Familiarity with various life-safety information system platforms

173

Motor Carrier Safety Spec, GS Resume Examples & Samples

Experience in applying Federal and/or State Safety regulations
Experience applying safety regulations concerning trucks and buses
Experience applying safety regulations governing commercial trucks and buses to plan and conduct compliance reviews

174

Mgr Safety & Human Performance Resume Examples & Samples

This position is responsible for direction of the Safety process for the organizations comprising Delivery. � In this capacity, the incumbent confers with Corporate EH&S to identify and evaluate potential utility contributions to corporate strategies and consults with utility management to determine impacts of the strategies to delineate required actions and to develop methodologies to achieve the required results in a cost effective manner. � The position also provides required guidance and technical assistance in the implementation of the Corporate Safety System, participates in the development of corporate performance targets and provides performance reporting for corporate use
Duties also include overall responsibility for development and implementation of policies, programs, procedures and practices required for the utilities to achieve regulatory compliance. � This position directs development of performance measures and targets and drives continuous improvements in performance. � An integral part of this responsibility is consideration of the regulatory requirements for each of the states in which operations occur and determination of when to implement compliance activities that are consistent across Delivery. �
This position directs the activities of approximately 25 associates with direct supervision of 5 associates
This position has a dotted line reporting relationship with the Vice President ' EH&S (Corporate group

175

Director of Truancy Intake Programs & Safety Operations Resume Examples & Samples

Coordinates with the NYPD and School Safety Division to manage 7 truancy intake centers located throughout the 5 boroughs. Determines appropriate courses of action to assist truant students in re-engaging with their schools. Follows up with social service agencies as needed
Under the direction of the Deputy Chief Executive Officer for Safety and Security, manages the day to day activities of the DOE staff assigned to the intake centers to ensure DOE policies and procedures are taking place, attendance outreach is conducted and information is sent to the home school. Meets regularly with the staff for status updates and to follow-up on new issues
Works with OSYD senior staff, other DOE offices, NYPD, the Mayor’s Office and other City agencies to develop programs and models to support students with truancy problems and help them return to school
Works with the Mayor’s Office to support the Police Athletic League Engagement Center with its efforts to engage and redirect students who are chronically absent and truant
Utilizes student and school-level data and information from incident reports to inform and advise OSYD senior staff on key policy decisions
Trains staff at the Truancy Intake Centers to utilize data to help re-engage truant youth and works with the Centers to increase communication with the home school and provide the additional needed supports
Spearheads efforts to increase security of laptops, tablets and other electronics in schools, and works closely with NYPD to track stolen devices and return them to schools whenever possible
Oversees distribution and reprogramming of two-way radios used by schools to communicate with School Safety Agents
Meets regularly with NYPD staff and Mayor’s Criminal Justice Coordinator to review Compstat reports containing school-related crime data
Assists the Deputy CEO for Safety and Security in the sharing and communication of the DOE’s goals and initiatives regarding safety and security
Graduation from an accredited college with a baccalaureate degree and four (4) years of full-time progressively responsible professional experience, as described in “1”; or
A satisfactory combination of education and/or experience which is equivalent to “1“ above including teaching experience towards meeting the general experience in “1“ above; however, all candidates must have the eighteen (18) months of managerial experience

176

Safety Resume Examples & Samples

Successfully demonstrated ability to manage change
Demonstrated ability to deliver results through others
Qualification & Knowledge
Achieve KPI targets including required injury rate, energy, water and SH&E compliance. Zero accidents, Zero waste
SH&E KPI performance at both Plant and team level
Ability to manage stress and aggressive deadlines
The element of curiosity, openness to exploration and continuous learning
Audit results, Risk Assessment completed, correct closeout
Commitment to strong work ethic, integrity and honesty

177

Mountain Safety Resume Examples & Samples

Supervising and maintaining the highest levels of guest safety while skiing/boarding and standing at on-mountain stations, on varied terrain in high altitude, with varying winter weather conditions
Facilitating the location of individuals that have been separated from their party
Completing guest “contact cards” during educational and safety enforcement interaction
Placing and monitoring signage and baffles in slow ski zones

178

Health, Enviroment & Safety Resume Examples & Samples

Bachelor’s degree in engineering, safety, fire protection, environmental or industrial hygiene
Must maintain a minimum cumulative 3.0 GPA on a 4.0 scale
Strong computer skills, including Microsoft Outlook, Word, Excel and PowerPoint
Solid verbal and written communications skills
Excellent organization and time management skills to handle multiple tasks and achieve challenging deadlines
Team player and ability to interact effectively with all levels of management and personnel, as well as industry peers and regulatory authorities
Ability to work with minimum supervision, self-starting and innovative
Ability and willingness to travel to Oxy operations
Ability and willingness to be stationed in Houston, TX

179

Director, Pharmacovigilance & Safety Services Resume Examples & Samples

Travel (approximately 10%) domestic and /or international
Direct PV Operations, including work distribution, supervision of assigned projects, departmental audits and supervision and mentoring of staff to ensure tasks are completed in accordance with ICON SOPs, Project Specific Procedures and other applicable regulations
Keep senior management appraised of any potential/actual study or staffing issues or risks and developing solutions
Provide line management of assigned staff
Direct the re-engineering of and implementation of process improvement to improve the efficiency of assigned projects and global MSS processes
Ensure audit readiness and PV representation at audits
Documented ability to mentor, support and develop staff
Strong Project Management Skills
Due to the nature of this position it may be required for the employee to travel. Therefore, dependent on the employee’s location, the employee may be required to possess a valid Driver’s license

180

Drugs Safety Assoc Resume Examples & Samples

Coordinates the oversight of outsourced safety-related functions
Coordinates and performs adverse event data entry, coding and assessment of adverse events, case review, follow-up, tracking of reports, and regulatory reporting activities to comply with protocol and regulatory specific requirements
Prepare for expedited reporting of SAEs, including preparation of analysis of similar events
Support the preparation of periodic safety reports in accordance with regulatory requirements and standard operating procedure
Support signal detection and evaluation activities in accordance with SOPs and guidelines
Provide safety content review of clinical protocols, study reports, Investigators Brochure and other related documents
Participate in for Drug Safety Monitoring Boards or independent monitoring committee meetings, as applicable
Strong knowledge of US and EU pharmacovigilance regulatory requirements
Strong knowledge of current pharmacovigilance practices
Experience and knowledge of drug safety databases; experience with ARISg is a plus
Ability to evaluate, interpret and synthesize scientific data
Team player with ability to function in a multi-disciplinary environment
Self-motivated, detail oriented, and able to prioritize and plan effectively

181

Field Safety Prof Mid Resume Examples & Samples

Conduct reviews of potential risks on projects (HSE, contracting, and insurance) and identify potential mitigation measures
Provide regulatory and policy review, interpretation, and technical advice
Assist in communicating HSE program requirements to functional group leaders
Maintain working knowledge of applicable government requirements, company policies, and procedures
Recommend improvements to HSE tools, processes, policies, and training
Proficient in Microsoft Office software including Word, Excel, Power Point, and Outlook
Ability to work independently and make decisions on the spot without consultation
Ability to type at least 35 words per minute
Minimum two (2) years of experience in construction safety, industrial hygiene, or related field
Certificate of Training in OSHA 30-Hour Construction, OSHA 30-Hour General Industry, or equivalent

182

Site Safety & Health Office Resume Examples & Samples

Advanced knowledge of HSE policies and processes
Working knowledge of compliance with Hazardous Material (HAZMAT) handling
Comprehensive knowledge of industrial safety programs and OSHA regulations
In depth knowledge of environmental regulations
Knowledge of various computer applications such as Microsoft Office applications (i.e. Excel, Word, PowerPoint, Access)
Knowledge of the Federal Acquisition Regulation (FAR) and related federal and state legislation and regulations
Project planning and management skills
Ability to obtain and retain a Secret security clearance
Bachelor’s degree in in Industrial Hygiene, Health, Safety, & Environmental Management or an associated discipline
Two (2) years’ experience in related field can be substituted for each year of the four (4) years of college. Master’s degree preferred
Eight (8) or more years’ experience in any combination of the following areas: Environmental Management and Compliance, Safety Management and Compliance, Industrial Hygiene
Industrial hygiene experience and OSHA training experience preferred
Two (2) years management experience preferred
Have fulfilled the following pre-requisite training and experience

183

Director, Construction Safety Resume Examples & Samples

Leads an efficient & effective Nat’l Construction Health&Safety team (partnering w/Reg’l EH&S Mangers & Partners) to ensure that Construction Health&Safety issues are properly managed. Responsible for hiring, managing, & training Construction H&S Representative as needed
Collaborates w/the Nat’l EH&S Health&Safety, Nat’l Infection Control Nat’l Compliance & other global/inter-Region safety teams to develop, implement, & sustain the Construction Health & Safety system initiatives. Coordinates w/Reg’l Safety Leaders to ensure consistency in construction safety Mgmt across the organization
Manages the development & deployment of the Contractor Performance Safety Standards Program Nat’lly in all regions (construction costs across the program approx $3 billion annually)
Ensures NFS Sr & Reg’l Mgmt & CPFC Leadership implement standards through training of Reg’l Teams & Alliance General Contractors. Ensures H&S healthcare related requirements identified by Nat’l EH&S, Infection Control, Employee Health & various Government Agencies are included or updated as pertains to construction safety performance
Leads Nat’lly on-site investigation & root cause analysis of the most significant construction related Incidents or Near Misses, & serves as focal point for receipt & Reg’l distribution & decision-making on Reg’l & global construction safety alerts
Audits all regions for compliance w/Construction Health & Safety (H&S) performance on construction/remediation projects, determining effective safety engineering control methods & recommending to Reg’l NFS leadership improvements needed to comply w/Construction H&S standards
Acts as a key leader in developing & managing yearly Nat’l NFS & CPFC corporate strategies & initiatives related to Construction Safety including budget & schedule commitments & implementation plans for execution. Provides periodic progress updates to Nat’l & Reg’l NFS Leadership on goals/initiatives identified
Manages NFS environmental & construction safety deficiencies identified by NEH&S Nat’l safety audits & Nat’l Facilities Srvs Compliance. Ensures NFS Sr & Reg’l Leadership is aware of improvements needed & corrective actions necessary to mitigate the findings. Reports to NEH&S & NFS compliance the measures taken & progress made
Acts as a key Leader & Chair of the Nat’l Building Issues Steering Committee consisting of Nat’l EH&S, Nat’l Infection Control, Nat’l Facilities Srvs/Engineering & NFS Reg’l Leadership to develop, maintain & deploy Nat’l Environmental & Safety Programs related to Nat’l Capital Project Construction & Facilities Construction
Analyzes & reports monthly Safety Performance data to the Board of Dirs & Nat’l Facilities Srvs Dashboard. Performance is captured on General Contractor performance for projects greater than $250MM & CPFC performance related to self-performed work
Minimum ten (10) years of experience in construction environmental, health, safety and loss control administration/management
Minimum ten (10) years of experience in developing and deploying construction safety and environmental programs
Minimum five (5) years of experience in administering large Owner Controlled Insurance Programs
Minimum five (5) years of experience in managing workers compensation and general liability losses
Minimum one (1) of the following certifications is preferred: Safety Supervisor Certification (SSC), Occupational Health and Safety Technician (OHST) or Construction Health and Safety Technician (CHST), Construction Risk and Insurance Specialist (CRIS)
Master's degree in business management, organization management, construction management, occupational safety, environmental engineering, industrial hygiene or closely related field preferred
OSHA 500 and OSHA 30 hr. preferred

184

Consmr Safety Inspr Resume Examples & Samples

Selectee must be able to obtain and maintain a security clearance. If selected you may be subject to a National Agency Check and Inquiry (NACI) and a credit report inquiry
May be subject to satisfactory completion of one year probationary or trial period
It is the policy of the Government not to deny employment simply because an individual has been unemployed or to find an individual unqualified, unsuitable, or unfit for employment based upon financial difficulties that have arisen through no fault of the individual. Information about an individual's employment experience should be used only to determine the person's qualifications and to assess his or her relative level of knowledge, skills, and abilities. Although an individual's personal conduct may be relevant in any employment decision, including conduct during periods of unemployment or evidence of dishonesty in handling financial matters, financial difficulty that has arisen through no fault of the individual will generally not itself be the basis of unfavorable suitability or fitness determination

185

Safety Processing Expert Resume Examples & Samples

Alert manager to potential safety signals based on incoming case reports
Assists in the training of other Safety Processing Experts as necessary
Support DS&E Projects or database validation activities as required

186

Safety Processing Expert Resume Examples & Samples

Evaluation and QC of Serious Adverse Event / Post Marketing Adverse Event to ensure accurate and consistent data entry and processing from source documents, with emphasis on accuracy, timeliness and quality
Assess adverse event reports for seriousness, causality and expectedness as per the Investigator Brochure/Basic Prescribing Information/US package insert, consulting the Medical Safety Expert whenever needed
Determine the necessity for follow-up and prepare follow-up request as needed Work in conjunction with Clinical Safety Associates, Pharmacovigilance Scientist from other processing sites and Medical Safety Physicians to ensure that reports are accurately evaluated and database
Drive process changes according to internal and externals drivers
Timely provision of monitoring reports
Act as Subject Matter Expert during audits & inspections and develop Corrective and Preventive Actions and measure effectiveness
Timely release of monitoring reports
Identify and eliminate non-value added processes
Develop, contribute and maintain procedural documents and map processes [SOPs, WPs, PGDs, SGDs, FRMs , Training slides, process maps] 13. Lead Impact assessment for environment changes (business or regulatory driven)
Working in collaboration with the CPOs for local literature screening process
Monitoring literature search application and leading changes/ improvements in the existing application
Author/co-author, along with Global Medical Safety Physicians, regulatory periodic safety reports (Periodic Safety Update Reports, US Periodic Reports) for Novartis mature portfolio: collecting, organizing, analyzing and presenting the data by means of DS&E templates and procedures
Review global marketing programs and establish process for AEs collection with global marketing teams
Review Risk Management Plans in coordination with Global Medical Safety groups and assess the operational feasibility and implications of Pharmacovigilance commitments
Support the development and testing of safety systems/IT applications and in the preparation of relevant manuals
Support Health Authorities inspections and audits, and development of Corrective & Preventative Actions (CAPA) to address safety findings
Train and mentor new DS&E associates

187

Safety & Risk Specialist Resume Examples & Samples

Ensures injured employees receive proper medical attention and maintains close liaison with preferred medical providers and Third Party Administrator (TPA)
Ensures that the company makes every effort to reasonably accommodate those employees with special physical challenges and authorizes the Modified Duty program as applicable
Ensures all claims are investigated and reported to TPA in a timely manner
Conducts ergonomic assessments, studies complaints, makes recommendations for new workstations/work environments and conducts ergonomic training sessions
Coordinates and conducts ongoing EHS initiatives including ongoing or new safety training programs
Researches various safety issues in response to internal customer needs and requests and provides recommended solutions
Assists in maintaining current and accurate recordkeeping, including OSHA 300, Worker’s Compensation and DOT/driver files
Assists in communications/presentations for New Employee Orientation, Safety Committee, Leadership and company communications to enhance the development of safety initiatives
Has access to confidential employee records including safety, risk, and employee information and maintains confidentiality, including HIPAA requirements
Works proactively to audit, assess and maintain safety and risk mitigation programs, oversight of contracted services, and expansion of enterprise risk management by serving on safety committees
Identifies unsafe conditions. Determines accident cause factors and facilitates appropriate remedial actions
Investigates all serious events. Assists with communication and documentation of errors or serious events in accordance with legal requirements and/or accreditation standards
Coordinates and delivers risk and safety management orientation and continuing education programs for providers, management, and staff to enhance awareness of their role in employee safety, risk reduction, and event reporting

188

Director, Medical Safety Physician Resume Examples & Samples

Performs aggregate safety data review on an ad hoc basis in order to support department initiatives in process improvement and regulatory compliance
Provides pharmacovigilance and drug safety support for internal and external customers
Performs medical review of individual case safety reports (clinical and spontaneous), including coding, seriousness, expectedness and company causality assessments
Provides medical contribution and performs medical review of aggregate reports
Provides medical contribution and performs medical review of responses to regulatory authorities
At least 8+years of experience post-residency, with at least 2 years of clinical experience and 5 years of experience in pharmacovigilance at a pharmaceutical/biotechnology company
Strong knowledge of individual adverse event case report processing, triage and medical review
Experience with safety databases (Argus preferred) and safety coding dictionaries (MedDRA, WHODRUG)
M.D. degree required with medical licensure in at least one state
Board certification in a specialty appropriate to the products of Jazz Pharmaceuticals preferred

189

Temporary Safety Clerk Resume Examples & Samples

Track and input Safety data
Prepare PowerPoints and newsletters
Format job task procedures
Other miscellaneous administrative work (i.e. filing)

190

VP-quality, Patient Experience, Safety Resume Examples & Samples

Partners with HPMG for Quality Systems to provide overall leadership of KPHI’s quality of care and patient experience improvement program, the delivery system and administrative functions
Drives the development of KPHI programs and systems that achieve high quality patient care outcomes, patient experiences and safety across care delivery and position Kaiser Permanente as the quality leader in the market place. KPHI care delivery includes ambulatory services, inpatient and continuing care services
Directs a high functioning patient experience culture and strategy, quality resource management, credentialing, clinical quality patient experience support (wellness, prevention, health promotion and disease management), resource stewardship, risk management, patient and workplace safety, regional nursing practice, labor management partnership (LMP), measurement/survey, and identifies and acts on any opportunities for improvement
Partners with care delivery leaders by providing timely and accurate quality and regulatory advice, information, consultation and continually measures satisfaction of accountable patient experiences
Develops strategic prevention plan, implements program guidelines, and develops program evaluation and monitors outcomes for members’ health using HEDIS/CAHPS/HCAHPS targets and outcomes
Collaborates with compliance and operations to minimize risk and maximize outcomes
Ensures KPHP/H Accreditation, Regulatory Compliance and Licensing
Leads Quality Program Administration, (i.e., QHIC processes) including quality management oversight, health care delivery oversight, assessment and intervention
Directs activities to ensure that KPHI obtains and maintains full NCQA accreditation, meets MDQR, TJC, CMS and state and other regulatory requirements
Provides leadership for the development and maintenance of key operational relationships between HPMG and KFHP/H to achieve quality outcomes and ongoing regulatory compliance
Identifies obstacles, barriers, and issues impacting KPHI’s ability to meet its quality, patient experience, resource stewardship, patient safety and regulatory goals and objectives, recommends and facilitates innovative and creative solutions for the entire KPHI delivery system
Represents KPHI in strategic matters locally and nationally, particularly those relating to quality of care and patient experience, TJC, NCQA, MDQR, CMI, HEDIS and other regulatory matters
Collaborates with the leaders of the Care Management Institute to obtain appropriate, on-going data on quality outcomes and member and community health status improvements
Builds and maintains a strong community presence that contributes to the overall betterment of the community and that promotes KP’s community role and social purpose
Minimum eight (8) years of management experience, with a minimum of five (5) years in healthcare operations
A clinical license and a graduate degree in business administration, health care administration, or a related field preferred

191

Hotel Safety Assistance Agent Resume Examples & Samples

Patrol the property as required and ensure the security of hotel guests and assets
Act as property first responder to alarms, medical calls, etc. maintain absolute confidentiality on sensitive issues
Maintain accurate notes and log information as required; ensure that all pass-on information is communicated to the next shift
Valid certification in CPR/AED and first aid, or the ability to obtain certification
Effective communication skills in English

192

Safety Assessment Expert Resume Examples & Samples

Represent BxSA/PCS in the Global Project Teams
Identifies potential project hurdles, suggests solutions and establishes contingency plans
Responsible for the compilation, seeking of approval and updating of the BxSA development plan to support early development of the Target Product Profile
Monitor study timelines, objectives and budgets, ensures accuracy of Succeed plans
Review relevant study reports, contributing to scientific standard and integrity of study reports
Monitor closely study timelines, quality (report review) and results, and assures rapid and effective communication of data to project teams and, for early compounds, to Research
Manage and coordinates relations with regulatory authorities in close collaboration with DRA
Carry out Due Diligence activities as required
Manage the preparation/presentation of all internal and external documentation
Keep updated the project-specific information database systems within BxSA and PCS
Monitor study timelines, objectives, results and budgets, contributes to scientific standard and integrity of study reports and assures rapid and effective communication of respective data to Program teams, Target teams, Strategy Teams and line functions
Manage and coordinates relations to regulatory authorities in close collaboration with line unit heads, Strategy team and Regulatory Affairs
Lead and manage Target teams as appropriate and contributes to the performance evaluation of their members
Maintain current scientific and regulatory expertise in Tox/Path/ADME/PK (e.g. training courses, external meeting attendance, professional memberships)
Ensure compliance with regulatory, animal welfare and company guidelines
Extensive and broad experience in nonclinical safety assessment
Excellent working knowledge of the drug development process and Novartis processes in early and full development
Broad knowledge of regulatory processes and guidelines relating to preclinical safety
Experience in writing regulatory documentation (IBs, INDs, IMPDs, CTDs etc) and communicating with health authorities
Experience in management of projects
Excellent interpersonal, leadership and teamwork skills
Excellent oral and written communication and influencing skills
Strong motivation and negotiation skills
Strong organizational skills (e.g. planning and time management)
Ability to manage conflicting expectations from the line unit, TA Strategy team and project teams in a matrix management environment
Ability to focus and work on several projects simultaneously
Recognised ability to represent BxSA/PCS on Novartis cross functional decision boards or other cross functional project teams
Recognised expertise in technical and scientific problem solving in a project driven, multi-disciplinary international environment
Ability to mentor and coach new Program Team representatives from BxSA
Detailed knowledge of the scientific principles and regulatory processes of drug safety
Working knowledge of relevant IT systems, e.g. Microsoft Office
Expert understanding of the design/structure of drug safety studies
Ability to work with computer based planning tools such as Microsoft Project
General knowledge of Novartis operations and processes

193

Upstream Safety Performance Analyst Resume Examples & Samples

Responsible for the provision of Upstream Segmentspecific HSE performance Data , on an ad-hoc and periodic basis
Deliver and assure the data to support SegmentSafety & Operational Risk memos for SORCs, EPR, and additional executiveoutputs
Support Segment leadership in the provision andassurance of segment-specific HSE performance data
Act as a key contact for the Line and S&ORstakeholders
Responsible for providing technical expertise toSegment functions for Safety & Operational Risk Performance Reporting
Assure Segment Safety and Operational RiskPerformance Reporting
Responsible for supporting the update and provisionof guidance for any Segment Guidance documentation on HSSE Reporting
Safety metrics and data, working closely withPersonal Safety subject matter experts (“SME”) and equipping them with analysisand insight to support their recommendations and interventions, contributing tothe continuous improvement of Personal Safety in. The analyst will beinstrumental in the design and delivery of the analysis and insight
MIView systems support and front end applicationdevelopment
Responsible for supporting the update andprovision of guidance for any Segment Guidance documentation on HSSE Reporting
Supporting the global deployment of new IncidentReporting System “IRIS” by working closely with the Project team and helping torepresent and drive successful delivery of NFMI requirements
Support the expected changing IRIS OperatingModel and any impact it may have on organization structure and role content
Help to support S&OR in its transition tothis new system solution
Successfully deliver on Year End HSE PerformanceData reporting commitments – both externally and internally
Strong engagement and influencing skills
Proven ability in using Excel, VBA and BusinessObjects to an advanced standard

194

Site Safety Manager Resume Examples & Samples

Bachelor’s degree in safety or environmental health from an accredited university
3+ years of work experience in a similar role
Experience with federal and provincial safety laws
Distribution Center, Logistics, or Manufacturing Safety experience with mix of exempt and non-exempt employees at a site of at least 250 people
Experience leading changes to reduce injuries and ensure compliance in a single or multi-site environment
Master’s degree in Occupational Health and Safety preferred

195

Supervisory Railroad Safety Spec-gs Resume Examples & Samples

Railroad industry, including economic and operating considerations and equipment
Railroad accident investigation techniques
Federal regulations and standards governing the shipment of hazardous materials by rail including containerization, loading, handling, documentation and placarding
Typical reactions of the different hazardous commodities transported by rail and the safe procedures for containing or controlling leaks, fires, or explosions
Experience leading and conducting special investigations and inspections involving hazardous materials
Experience dealing with the railroad industry, labor unions, the general public and state and local governments in positions such as a first responder, rail safety manager, quality assurance manager, regulatory compliance officer on matters relating to hazardous materials rail transportation
Experience preparing detailed technical reports, narratives and correspondence as well as recommendations concerning the interpretation of regulatory materials in area of rail hazardous materials transportation

196

Safety Monitor Junior Resume Examples & Samples

Screening of Italian Pharmacovigilance Network
Management of Spontanous ICSRs
Managenent of CT cases
Management of Pharmacovigilance tools

197

System Safety Engineering Discipline Lead Resume Examples & Samples

Lead the creation of system safety analysis documents: Systems Functional Hazard Assessments, Fault Trees, Common Mode Analysis, Particular Risk Assessment, Zonal Safety Analysis and Reports required as part of engine certification to CFR Part 33 (or foreignequivalent) and propulsion system certification CFR Part 25 Subpart 901, 903 and 1309 (or equivalent)
Participate in program reviews with Customers, management and suppliers
Must have a BS Degree in Aerospace, Mechanical or related engineering discipline
Minimum of 10-15+ years of technically, progressive Safety Engineering related experience, with proficiency in application and use of system safety analysis tools (FMECA’s & Fault Trees for the SSA) and processes and procedures contained in SAE Aerospace Recommended Practices (ARP) 4754, ARP 4761, or military safety standards such as MIL-STD-882
Ability to obtain and maintain a US Government Security Clearance, US Citizenship required
Knowledge of gas turbine engine and mechanical component hardware design and system operation
Self-starter, detail oriented, focused and possess strong organizational, analytical, interpersonal and communication skills

198

Paint & Safety Engineering Intern Resume Examples & Samples

Still reading? Then you might be the one. Apply today with your best foot forward. But first, check out the detailed description of what you’ll be responsible for
Work on technical issues affecting paint throughput and quality
Assist in establishing safety standards in the plant
Teach and train operators
Participate and lead kaizen events
Help streamline the validation process
Design tooling or processes to improve safety, ergonomics, and increase manufacturing productivity
Assist support staff with introduction of new products to manufacturing

199

Director, Office of Safety Programs Resume Examples & Samples

Lead and direct a staff of highway safety experts in developing and implementing national safety initiatives and policies, data-driven approaches, and identifying and deploying innovative technologies to reduce roadway injuries and fatalities
Establish strategic highway safety plans and performance measures for safety-related programs implemented across all 52 States and territories. Provides executive leadership and guidance to all State DOTs on improving safety performance on the national highway system
Serve as the national authority to promote and coordinate FHWA and DOT highway safety initiatives to save lives including managing and administering the $1.3 billion Highway Safety Improvement Program
Collaborate with FHWA Headquarters program offices and field offices, other DOT operating administrations, State DOT and local government officials, transportation industry representatives, and safety advocates to address cross modal transportation safety issues
Knowledge of highway safety programs and policies at the Federal, State, and local levels
Broad knowledge of the National, State, and local partners involved in highway safety
Complete a Public Financial Disclosure report, OGE-278. You will need to provide the information annually

200

Integrated Safety Management Resume Examples & Samples

Expert, demonstrable experience using data for fact-based decision making and experience with data trending, analysis, and developing performance metrics
Expert knowledge of the Laboratory's integrated safety management policies, practices, and procedures
Expert knowledge of the Laboratory's work management system, practices, and procedures
Expert experience and demonstrated skill in conducting research, investigating alternative solutions, and recommending resolution of problems affecting worker safety and/or integrated safety management

201

Safety Medical Director Resume Examples & Samples

Designs or manages the implementation of the Physicians and Scientists strategy within Patient Safety TAs both regionally and globally
Uses expertise and knowledge of global issues to develop strategic Physicians and Scientists objectives for inclusion into AstraZeneca's annual business objectives
Defines strategies or leads AstraZeneca's response to complex technical issues for specific safety aspects in relation to current projects, new projects and various plans
Provides expert advice in the area of specialism, influencing the development of statistics to the global business and P atient Safety TAs
Closely follows medical developments within assigned areas and disseminates new information within Patient Safety to transform trends and emerging data into new plans
Liaises with the internal and external medical community to follow developments within areas of expertise
Contributes to ensuring that an adequate number of qualified physicians and scientists is available for Patient Safety to satisfy AstraZeneca's objectives in the Patient Safety area
Maintains a high degree of understanding and awareness on new and emerging medical development
Contributes to or manages the development of the senior management team in area of expertise
Follows important developments and trends in scientific literature and develops contacts with opinion leaders
Leads regulatory communication and preparation of higher level documents
Provide TA RIAIV Disease Area strategic Patient Safety input to drug development and post-marketing programs across life-cycle of substances and products -- e.g to dTPPs, patient populations, scientific understanding of toxicity-related mechanisms, ensure risk management commitments, risk mitigation and communication
Key Liaison for a particular Disease Area subset of a given PSTA across all relevant AZ Science Units (MedI, iMed and GMD)
Share best practice in PS TA RIAIV
Discuss needs of TA RIAIV PS disease areas with Safety Science and other enabling groups in AZ, facilitate SaMT interactions with ISRB, MSRB, PS Peer Review, SKGs and SERM
Coach and mentor junior PS staff and support SaMTs in relevant disease area in relationships with MSDs, Product teams and Clinical Challenge
Chair peer review discussions in PS TA RIAIV
Lead SaMTs for key products in phase III/early launch phase
Partner with MSD for all D&I elements
Establish and lead SaMT in accordance with PS Operating Model
Agree SaMT strategy and plan with GPVP, MSD and PSTAVP TA RIAIV
Secure resourcing with PS Skills Director
Ensure SaMT delivery of all elements of agreed plan to next project milestone, input to governance decisions and strategy to next milestone
Ensure expert input to all elements (including SKGs) of design and interpretation, and optimal use of available tools and methodology (e.g. modelling and simulation)
Enable PSTAVP TA RIAIV to be accountable for technical content of all deliverables related to key project
Extensive experience in designing, monitoring and implementing clinical trials and interpreting trial results
Significant experience in advanced research and development
Therapeutic area expertise and commercial understanding
Thorough understanding of pharmaceutical safety, reporting and surveillance processes and >5 years experience of Patient Safety as it relates to clinical trials and marketed products in any relevant field such as pharma, Regulatory Agency or Public Health agency
Understanding of the medico-legal aspects of pharmacovigilance
Proven leader of cross-functional delivery teams. Project Management Competent level
Able to influence others within relevant TA
Professional at innovation, integrating experts; co-ordinate PSDA discussions into Enabling Safety Science priority setting
Minimum of Level 3 at all AZ leadership capabilities
Professional in PS/PV capability including having significantly contributed to safety parts of regulatory submissions and PRMP production
Experience of benefit:risk evaluations
Able to work across TAs and Functions
Research background including peer reviewed publications
Degree in medicine and experience as a physician or academic
PhD in scientific discipline (in addition to MD)

202

Liver Safety Expert Physician Resume Examples & Samples

As a regional expert supports assessments and research related to liver toxicity
Provides, as an expert, strategic physician expertise to quantify the benefits, risks, value and uncertainty of clinical trials
Oversees or provides expert support to AstraZeneca clients on a potentially global basis
As a specialist leads a cross-functional, multi-skilled team from a number of scientific disciplines which may include project management
Leads or oversees a diverse range of initiatives to improve quality, integrity of information interpretation, cost or time
Ensures efficient and effective leadership and management of project information, strategy, quality standards, and integrity of information interpretation
Provides expert guidance on advanced clinical trials
Represents AstraZeneca and its Physicians at external events
Networks with colleagues and experts, providing consultancy in area of liver toxicity and serving as a resource for others by sharing experience within and beyond team function
Investigates and develop leading-edge approaches and provides support for novel informatics approaches in the evaluation of patient safety bodies
Keeps own knowledge of best practices and new relevant developments up to date
Ensures that all work is carried out with regards to AstraZeneca standards and external regulations
Medical Degree
Board certification in Hepatology or Gastroenterology with expertise in hepatology
Significant experience as a physician
Extensive general medical knowledge
Extensive experience in managing or designing clinical trials which require close monitoring

203

Global Safety Physician Resume Examples & Samples

Responsible for the continued safety assessment, evaluation and risk management of AZ products or product groups in various stages of clinical development and/or the post-marketing setting
Responsible for continuous efficient evaluation of adverse event and all other safety information in order to predict and manage the safety profile of compounds in clinical development and marketed products through identifying the need for update to reference safety information and drive proactive implementation of risk management initiatives in accordance with global regulatory requirements
Provides consistent communication of safety topics across all regulatory safety documents, eg Periodic Benefit Risk Evaluation Reports (PBRERs), Periodic Adverse Drug Experience Reports (PADERs) and Development Safety Update Reports (DSURs), for assigned product(s)/program(s)
Proactively evaluates the clinical implications of safety data from pre-clinical studies, clinical studies, literature and other information sources in order to predict / establish the safety profile of compounds in clinical development, including employing expert groups and methodologies such as Safety Knowledge Groups (SKG's), Safety Science, Informatics expertise, modeling and simulation to manage the risk to patients
Works collaboratively with experts from across AZ-MedImmune (e.g. Pre-clinical safety, Safety Knowledge Groups, Safety Informatics Scientists and Safety Science), as well as colleagues from all three Science Units as leader/member of a Safety Management Team)/ MedImmune Safety Review Team or as a member of other cross-functional project teams, thereby promoting high quality evaluation of safety data
Understands the role of the QPPV and contributes to the maintenance of the pharmacovigilance system and processes
Supports key contacts with opinion leaders, as needed
At least 2 years of clinical experience post-registration
At least 2 years of Drug Development/Patient Safety experience (the majority of which should be in industry in Patient Safety) with clear evidence of delivery
MSc/PhD in scientific discipline
Experience of supervising Patient Safety colleagues
A demonstrated ability to understand epidemiological data

204

Safety Physican Resume Examples & Samples

Medical degree (eg MD, MBBS)
High level of medical competence, with an ability to balance this with industry standards to achieve business goals
Able to work across therapeutic areas and Functions

205

Safety & Health Leader Resume Examples & Samples

Bachelor’s Degree in Occupational Safety & Health, Industrial Hygiene, Engineering or related field
A minimum 5 years Safety & Health experience in an industrial, chemical process or manufacturing environment
Knowledge of OSHA 29 CFR 1910 and 1926
Knowledge and application of Process Safety Management (PSM) concepts
Experience using Microsoft Office suite such as Word, Excel, PowerPoint and Outlook
A minimum of 7 years Safety & Health experience in an industrial, chemical process or manufacturing environment
A minimum of 3 years supervisory experience
Experience in a support or leadership role in a process safety environment
Experience in a safety & health leadership role
Experience in a pulp and paper manufacturing facility
Certified Safety Professional (CSP), Certified Industrial Hygiene (CIH) or Professional Engineer (PE) certification

206

Safety Internship Summer Resume Examples & Samples

Occupational safety
Occupational health
Industrial hygiene
Fire safety / hazardous materials
Ergonomics
Systems safety / process safety
Environmental safety
Construction safety
Pursuing a BS or MS degree in Occupational Safety and Health, or other safety concentration
At least a rising Junior level status
Minimum 3.0 GPA in major coursework and overall
Ability to relocate per program requirements
Willingness to work in a hot, humid, cold and noisy environment
Willingness to work in an industrial environment around moving or heavy equipment
Willingness to wear all required safety equipment including but not limited to: hearing protection, safety glasses and safety shoes
Willingness to work in a fast paced environment which could require bending, reaching, pulling, pushing, heavy lifting, climbing stairs or ladders and working in high or confined spaces
Analytical and organizational skills
Able to work independently and manage multiple tasks
Interpersonal communication and collaborative teamwork
Proficiency in Excel, Access and other Microsoft applications is preferred
Ability to learn new software applications quickly
Ability and desire to follow detailed safety precautions

207

Safety Team Tech Resume Examples & Samples

Diploma in Electrical and Electronics Engineering, 2 Years degree in Electrical and Electronics Engineering or advanced coursework in Electrical field is preferable
Minimum of 1-2 years directly related experience,
Hands-On Electrical background, including experience building text fixtures and or prototype building
Experience with standard test equipment, including Power supplies, Multimeters, Oscilloscopes, High Voltage Tester etc
Experience utilizing basic shop equipment and various hand tools
Ability to review, understand, and convey technical information in an effective manner
Microsoft Office software expertise, including Word, Excel, and Access
Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment

208

Safety Resume Examples & Samples

Review and consolidate SHE annual indicators to support the elaboration of Nestlé in Society report
Daily management of data quality in SHE-PM
Interact daily with Markets/Businesses globally (e.g. Markets requests, follow-up of queries, changes in scope or data, collection of evidence)
Liaise with IS/IT department regarding SHE-PM technical issues
Coordinate with different units the review and fine-tuning of Nestlé’s GHG emissions scope 3 assessment
Review and analyze Nestlé’s factories 2020 environmental roadmaps
Master degree in the area of environmental or sustainability management
Outstanding analytical skills
Strong knowledge in reporting systems and Excel
High proficiency in handling large amounts of data and interpreting numbers
Fluent in written and spoken English absolutely required, other languages a plus

209

Head Medical Safety Hematology Resume Examples & Samples

Managerial oversight of a group of team product safety physicians in DSS
Driving content of and supervising, mentoring and training the writing of Sections 6 and 9 for all PSURs and ad hoc regulatory queries
Driving the strategy for and supervising, mentoring and training the writing of risk management plans for both internal use and regulatory submission
Mentoring and training the implementation and execution of Safety Review Team practices, including integrated risk management and assessment activities throughout the product lifecycle
Understanding the implications of the evolving US and global risk management guidances and legislation and translating to the Shire environment in order to evolve practices to meet regulatory expectations
Personally assuming and overseeing work carried out on products and/or issues under highest scrutiny from patient protection and regulatory perspectives
Developing and guiding presentations to the Executive Safety Review Committee
Providing required support to the EU Qualified Person for Pharmacovigilance
As part of the Drug Safety Surveillance Leadership team influence the strategy for Shire Global Drug Safety Organization
Act as senior leaders in Global Drug Safety ensuring excellent collaboration and networking within and outside of R&D
Providing input to strategic product placement from a safety perspective
Medical Degree required
Post-graduate training and regional certification in a subspecialty preferred
At least 10-12 years of pharmaceutical industry experience, the majority in traditional and global pharmacovigilance departments, with at least 4 years of experience managing, mentoring and training other safety physicians. Prior positions in clinical research and/or medical affairs departments preferred
Must have extensive current experience (preferably related to multiple products and therapeutic areas) in personally writing PSUR medical assessments, ad hoc safety query responses, and submissable risk management plans and in supervising, mentoring, training other safety physicians in this work
Must have experience in implementing and running Safety Review Team type forums, with experience in implementing and mentoring a full range of integrated risk management and assessment activities throughout the product lifecycle
Must understand the implications of the evolving global risk management guidance’s and legislation and be able to translate to the Shire environment in order to evolve practices to meet regulatory expectations
Strong post-marketing and investigational event and aggregate assessment/review/ documentation skills; must have experience is writing/oversight of Annual Reports, PSURs, Type II Variations, ad hoc query responses
Must have a strong working knowledge of US/EU regulations/ICH guidelines, and must be experienced in safety reviews of IBs, protocols, final clinical study reports, and summaries of safety
Experience in communicating with the FDA and other global Health Authorities
Global drug safety experience preferred
Ability to read, analyze and interpret scientific and technical journals
Must have very strong English language writing skills and mature verbal communication and presentation skills
Working knowledge of MedDRA coding and experience in developing case series retrieval strategies
Must understand pharmacovigilance-related information systems and operations issues; prior oversight of these functions a plus
Experience using a large-scale electronic data storage and retrieval system
Requires strong attention to detail in composing and/or proofing materials, establishing priorities, scheduling and meeting deadlines
Must be able to work in a fast paced environment with demonstrated ability to simultaneously manage multiple competing tasks and demands
Proven ability to independently resolve problems and conflicts
Excellent interpersonal, analytical, managerial, and organizational skills
Demonstrated ability to motivate, mentor, influence and collaborate with others in a complex global organizational matrix
Ability to empathize and support staff working in other national environments
Travel will be required (10-15%), with some international

210

Mountain Safety Resume Examples & Samples

Willing and able to work outside in a variety of winter weather conditions including high winds, heavy snow/rain and intense sunshine
Must be able to communicate in English
Must be able to lift required equipment for the position

211

Safety Sales Professional Resume Examples & Samples

Develop and maintain effective customer relations with purchasing and end user within assigned territory
Independently make decisions, but also utilize available resources to meet customer needs and work effectively with cross-functional team of supplier and internal resources
Develop and execute sales strategies and plans to expand business within assigned territory; Maintain a pipeline of opportunities to meet or exceed sales objectives
Perform sales calls and vendor relations with all customers and potential customers in the assigned territory
Supports multiple research sales representatives by providing information specific to safety, including technical information, product recommendations for customer applications, and other safety support
Manage pricing within territory to control profitability
Communicate with supervisor any customer issues or potential problems; perform other tasks assigned by manager
Inform customers of supply and price trends and assist in inventory control
2+ years of sales experience, preferably in safety products or controlled environment products
Bachelor’s degree preferably with a technical degree in safety, EH&S, environmental science or science
Must be able and willing to travel to customer locations
Demonstrates the Thermo Fisher values (The Four I’s) – Integrity, Intensity, Innovation, and Involvement

212

Safety Reviewer Consultant Resume Examples & Samples

40%- Process ICSRs through the Medical Review workflow step, adhering to established timelines and SOPs which includes the coding of medical terms using standardized medical dictionaries (i.e. MedDRA and WHO dictionaries)
20%- Function as subject matter expert in assigned therapeutic area (TA). Provide expertise and perform daily tasks associated with TA. Serve as TA escalation contact for enquiries coming into GDS
15%- Collaborate and interface with relevant counterparts in the regional and country drug safety functions to facilitate the global exchange of safety information. Interface with other groups (e.g. Quality, Regulatory Affairs, Marketing, IT, etc.) as needed. Represent GDS in broader, cross-functional or multi-divisional initiatives, and/or serve as project support for departmental projects (i.e. CAPAs, SOPs, Case Processing Guides, ARGUS, Mozart, MRP/PSPs)
5%- May participate in literature review activities related to adverse event reporting
Assessment of listedness and expectedness using various labels
Assessment of case data and writing of company causality statement
Literature review
Required Degree: Medical Degree, licensed in the US

213

Motor Carrier Safety Spec P, GS Resume Examples & Samples

TRAVEL: Overnight travel, ranging from approximately 1 to 3 weeks per month, away from the official duty station is required in order to complete training assignments and perform official business. You may also be required to travel to a foreign country; e.g. Mexico or Canada, to carry out work assignments
Experience reviewing, collecting, and analyzing data to prepare written summaries and reports
Experience identifying and documenting evidence of Federal Motor Carrier Safety Regulation violations when information is fragmented or has been deliberately falsified

214

Proposals Operations Coord, Lifecycle Safety Resume Examples & Samples

 Under direct supervision, review Requests For Proposal (RFP). Identify information for proposal text and budget development; and work closely with proposal development team to prepare and finalize proposals
 Provide support and assistance in the preparation of text and budget for proposals, rebids and related documents
 Perform edits on all documents and participate in the finalization of documents and distribution internal departments
 Track proposals and maintain documentation of proposal and ensure accurate information is included in tracking reports
 Provide support and assistance on small proposals for submission to customers
 May participate in customer meetings
 Perform all other duties as required
 Awareness of CRO Industry
 Knowledge of Microsoft Excel, Word and understanding of costing models
 Working knowledge of Excel spreadsheets and ability to update spreadsheets as needed
 Ability to interpret RFPs and protocols
 Possess strong analytical skills and excellent verbal and written communication skills
 Ability to establish and maintain effective working relationships with coworkers, managers and customers

215

Supervisory Railroad Safety Spec-gs Resume Examples & Samples

This position requires travel. The travel is a condition of employment
Railroad track system construction, maintenance, testing, or inspection techniques
Federal railroad track safety standards
Experience leading and conducting special investigations and inspections involving Railroad Track and Railroad Workplace Safety
Experience, as a technical authority, interacting with the railroad industry, labor unions, the general public and State and local governments on matters relating to track safety standards and roadway workplace practice
Experience as a supervisor or team leader within the railroad industry

216

Safety & Industrial Hygiene Intern Resume Examples & Samples

Will work under the guidance of the site EHS Program Manager
Conduct job hazard and PPE assessments
Develop sampling plans and perform Industrial Hygiene monitoring for physical and chemical hazards
Assist in conducting laboratory safety audits and inspections to verify regulatory and corporate compliance
Review new equipment for potential hazards
Attend laboratory safety committee meetings
Assist EHS program manager in the safety training of employees
Review and update safety procedures
Maintain and improve site EHS Sharepoint
Pursuing a Master’s degree in Environmental Health and Safety, Environmental Health, Environmental Science, Occupational Safety, Industrial Hygiene, Environment Management or related degree
Ability to work independently and take initiative
Excellent written and oral communications skills
High level of analytical ability where problems are complex
Interpersonal skills to work effectively with others

217

Senior Osha Safety Rep Resume Examples & Samples

Knowledge of all applicable federal, state and OSHA Regulations
Excellent interpersonal and communication skills (verbal and written)
Ability to develop and deliver effective group presentation/training programs
Ability to analyze, identify, and solve information/situations
Demonstrated ability to use standard office computer programs to provide reports and track applicable metrics
Bachelor’s degree in Safety Management, Business Management, Transportation Management or related discipline plus 6 years progressive related experience; or
Associates Degree in Safety management, Business Management, Transportation Management or related discipline, plus 8 years progressive related experience

218

Worker Safety & Health Professional Senior Resume Examples & Samples

Experience conducting human subjects research and service on an IRB preferred
Knowledge of research methods and conduct of responsible research/scientific integrity required
Must be capable of building consensus and partnering with research to develop human subjects protection measures within the framework of defined research aims
Must be capable of understanding complex, innovative research in a variety of scientific fields
Must have knowledge of sponsor requirements and experience with multi-institution collaborations
Drug Testing: All Security Clearance (L or Q) positions will be considered by the Department of Energy to be Testing Designated Positions which means that they are subject to applicant, random, and for cause drug testing. In addition, applicants must be able to demonstrate non-use of illegal drugs, including marijuana, for the 12 consecutive months preceding completion of the requisite Questionnaire for National Security Positions (QNSP)

219

Dir, Medical Safety Services Resume Examples & Samples

As a Director, the employee is expected to recognize the importance of and create a culture of process improvement with a focus on streamlining our processes adding value to our business and meeting client needs
Serve as a Project Director as assigned on Full Service and standalone safety, projects including provision of project governance and oversight of timelines and budgets as appropriate
Actively identify new business development opportunities and prepare business development proposals and client presentations as needed
Monitor Metrics, performance and staffing and issue reports to senior management
Develop safety plans and workflows for clients
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Medical / Science background (nursing, pharmacy or medicine preferred) with in-depth proven clinical research / pharmaceutical industry experience in medical services or pharmacovigilance with 7 years medical/safety or equivalent experience; 5-7 years of equivalent management or supervisory experience or equivalent preferred

220

Industrial Hygiene & Safety Prof Resume Examples & Samples

Working knowledge of and experience with implementing beryllium regulatory requirements
Experience with sampling, evaluating, and setting controls for potential of beryllium health hazards
Working knowledge of Laboratory organizations, operations, activities, and data collection tools
Working knowledge and application of Integrated Safety Management, Integrated Work Management, and other industrial hygiene and safety procedures

221

Safety Analytics & Report Resume Examples & Samples

20%-Product management/oversight
Minimum of 5 years’ experience in a pharmaceutical company preparing, writing, authoring and submitting periodic safety reports
May be required to travel domestically and internationally to other Shire sites and CROs or to external meetings (<10%)

222

Director of Pharmacovigilance & Safety Resume Examples & Samples

Conducts medical case review and data summarization of adverse events
Provides advice related to GCP and regulatory issues to clients, study sites and internal departments
Determines methods and procedures for new assignments
Oversees day-to-day activities of drug safety staff; works closely with team members to ensure timely and accurate reporting of critical information
Develops Standard Operating Procedures (SOPs) for drug safety surveillance, adverse event and drug coding
Provides consultation to Research Operations and IT staff, clinical study site personnel and communicates regularly with clients
Performs and reviews coding of adverse drug experiences and drugs for clinical trials and post marketing safety surveillance
Prepares and reviews periodic adverse drug experience reports for submission to the FDA
Gathers complete serious adverse event information and other documents for Data Safety Monitoring Boards (DSMBs)
Participates in SAE reconciliation between the safety and clinical database
Reviews post-marketing adverse events (AEs) and clinical trial SAEs with drug safety associates
Assures compliance with SOPs and FDA regulations for the reporting of adverse events to regulatory agencies
Reviews study protocols, final study reports and other safety related documents
Develops and prepares reports for company management as well as external regulatory agencies
Assists in the selection and hiring of drug safety personnel. Evaluates employee performance
Medical Degree required along with 7-10 years’ experience in premarketing and post marketing drug safety
Knowledge of FDA regulations and ICH guidance related to drug safety
Proficiency with Microsoft Officeand database software
Ability to work independently and collaboratively, as required, in a fast-paced, matrixed, team environment consisting of internal and external team members
Analytical thinker with excellent problem solving skills and the ability to adapt to changing priorities and deadlines
Excellent planning, organization and time management skills including the ability to support and prioritize multiple projects

223

Global Medical Safety Pharmd Postdoctoral Fellow Resume Examples & Samples

Candidates must have a Doctor of Pharmacy degree from an ACPE-accredited Doctor of Pharmacy Program at the commencement of the program
Candidates need to have the ability to critically evaluate data from multiple sources (clinical trials, literature, etc.), assess clinical importance and potential impact of the data, and present the findings clearly in both written and oral communications
Candidates need to be able to plan work to meet deadlines and effectively handle multiple priorities with excellent verbal and written communication skills, including formal presentation skills
Fluent in written and spoken English and a working knowledge of Microsoft Office (including Excel, Word, and PowerPoint) is required

224

Safety Operations Leader Resume Examples & Samples

Develops, manages, oversees and monitors all aspects of KP's safety program to achieve safety goals and ensure compliance to organization and regulatory requirements. Conducts planning to ensure the execution of the optimum business process integration of environmental, health and safety policies
Leads and manages medical center's safety department. 0%
Oversees company training programs for employees in areas such as compliance, hazardous material handling, emergency response, industrial hygiene, occupational safety and life safety; using KP National curriculum
Implements policy and procedures to ensure compliance with federal, state, regional, and local laws and for the reduction of environmental, workplace safety and health liabilities
Conducts comprehensive audits of facility(s) EH&S programs to identify areas for improvement and completes quarterly workplace safety Board reports and action plans. Collaboratively develops plans of action with department managers
Five (5) years of professional safety experience

225

Assistant Director, Risk & Safety Resume Examples & Samples

Bachelor's degree in Safety, Sports Management, Recreation/Athletic Administration, or related field
Two years of experience in risk management/safety compliance or related experience. Graduate assistant experience in athletic or recreational facilities (or similar) may be used in lieu of work experience
Ability to offer leadership and vision that will contribute to the development, maintenance, and advancement of risk management, safety, and emergency response policies and procedures for all RecWell facilities and programs
Strong knowledge of recreation risk management/safety standards, and the ability to apply standards prudently
Ability to instruct and certify staff in CPR/AED/First Aid or willingness to obtain necessary certification within 6 months of hire
Ability to work collaboratively with administrative, clerical, service, and student staff
Self-motivated, energetic, service minded, and adept at developing systems and solving problems
Must possess strong written and oral communication skills as well as interpersonal skills
Personal computer and related software skills, e.g.: word processing, spreadsheet/database management, electronic communications, etc

226

Safety Rep Resume Examples & Samples

Insects worksites; prepares reports with recommendations for corrective actions
Provides/develops technical safety training; conducts safety management training for supervisory and management personnel
5+ years as safety field inspector,
HS graduate or equivalent, BS/BA preferred
ENIT training

227

Safety Case Engineer Resume Examples & Samples

Degree (or equivalent) in a science or engineering based subject or equivalent work based experience
Good working knowledge of the production, review and approval process for safety documentation within a nuclear facility (EC, PMP, POI, PSR, PCSR)
Suitable training and accreditation on PASSPORT would be desirable

228

Spv-safety Resume Examples & Samples

Minimum of 4 years in a shipyard environment or equivalent
Knowledge and understanding of shipyard safety policy and procedures
Understanding of OSHA and Consensus Standards Emergency First Aid Certified Hazpower Shipyard Competent Person

229

Safety Liaison Resume Examples & Samples

Provides liaison between the Launch Enterprise Program at SMC and HQ AFSPC Safety Directorate, Space Safety Division at HQ AFSPC. Facilitates the missions of both offices by improving launch safety-related information crossflow to include discussion from meetings and contacts with action officers
Reviews and evaluates enterprise, Center, MAJCOM, AF, DoD, and other pertinent US Government regulation and guidance for effects on the safety aspects of Launch Enterprise programs and operations. Drafts and advocates for updates that are more appropriate for space launch and new launch safety-related guidance
Researches and recommends responses to interpretation requests of launch safety policy and guidance
Reviews and provides inputs/comments on programmatic documentation that can impact safety aspects of Launch Enterprise programs. Examples of documents include the generation and update of Launch and Range Capability Documents at HQ AFSPC, as well as SSMPs, LVMs, SSPPs, and SARs at SMC/LE
Supports and contributes to studies, tiger teams and reviews at HQ AFSPC that may affect LE programs
Participates in AF/FAA/NASA Common Standard Working Group activities to provide experience, expertise and ensure that launch safety, especially for LE programs, is enhanced in a way that mitigates mishap risks while enhancing efficiencies. Support subgroup activities such as Probability of Failure subgroups
Supports the Range Commanders Council Range Safety Group to assist in the development and update of RCC standards related to launch and range safety, especially Flight Safety Systems and Flight Analysis committees. Ensures that LE launch interests are represented
Supports semi-annual AF Space Safety Council meetings
Supports Range Integrated Management Meetings
Provides inputs to, or reviews safety reports in support of government launch indemnification recommendations for LE programs
Maintain expertise in orbital debris guidance, advocate for clarifications in guidance and related exception procedures
Assist with approvals of LE actions at HQ AFSPC and higher headquarters, such as the EELV National Space Policy Exception Approval request
Assists in the development and maintenance of launch mishap investigation plans. Provides assistance to launch safety investigations as requested
Provide liaison interfaces between LE and other HQ AFSPC directorates such as A2/3/6
Drafts and provides briefings for the above activities or otherwise as requested by the government customers
Maintains professional contacts with NASA, NRO/OSL and FAA/AST action officers for coordination of, or collaboration on, launch safety projects and issues
Maintains familiarity with flight safety system requirements and operations
Supports safety-related meetings involving launch providers or others as requested by the SMC/LE and HQ AFSPC/SEK customers
Provides feedback to the government customers regarding the above activities
Well-versed in Range Safety, System Safety, Orbital/Space Safety
Ability to interpret policy and apply to different scenarios, suggest improvements to policy and guidance documents
Confident using Microsoft Office applications - Outlook, Word, etc
Successfully operate in a wide range of roles and management levels from executive interactions to technical interchanges

230

Safety Superintendent Resume Examples & Samples

Directs and oversees and organization's investor relations function
Maintains and improves relations between an organization and its shareholders and/or the general financial community
Ensures that the organization's relationship with its shareholders reflects positively on the company's stock price
Leads and directs the work of others
Requires a bachelor's degree with at least 10 years of experience in the field
In addition to Levels 1, 2 and 3 competencies provides leadership and direction for multiple functional areas or regions through Senior Managers (Level 3); may also manage Managers (Level 2)
Shapes and integrates functional strategies
Applies expertise to create financial and operational solutions that apply across multiple functional areas
Leverages relationships with key internal/external customers to support business needs
Identifies business issues that may impact organizational results
Develops business plans to achieve functional or cross-functional objectives
Negotiates with and /influences customers and/or organizational leadership to set priorities and solidify relationships

231

Site Safety Manager Resume Examples & Samples

Lead and mentor Safety Associates in your assigned facility
Proficient in Microsoft Office and the use of pivot tables and the development of charts and graphics
Ability to manage multiple sites/remotely

232

Safety Superintendent Resume Examples & Samples

Provides technical support and verifies compliance with company and client Environmental Health and Safety policies, Occupational Safety and Health Administration regulations, and other job-specified procedures or standards
Plans and implements Health and Safety aspects of project-related work, including allocation of personnel and resources to adequately handle projects and assist with regulatory compliance
Schedules, coordinates and conducts project EHS audits and inspections in order to identify and assist in correcting unsafe and unhealthy work conditions or practices
Communicates results of audits and overall Health and Safety performance to management as necessary
Implements procedures for group medical programs, accident reporting, insurance claims handling, employee training, and EHS record keeping to ensure that the frequency of work-related accidents, injuries and illnesses does not create a significant financial impact to the company
Evaluates the effectiveness of loss control programs and implements corrective action
Participates in EHS and management/project council meetings
May also take active role presenting proposals to prospective clients
Decides on the resource levels necessary to ensure proper manpower utilization and to provide technical project support. Supervises EHS coordinators, technicians and assistants and manages their performance through goal setting, ongoing assessment and coaching
Internal contacts include business line leads, risk management personnel, Health and Safety personnel and office managers. External contacts include clients at work locations and regulatory agencies
This classification may include EHS Site Managers, Industrial Hygienists, and Environmental Specialists
Supervises the daily activities of business support, technical or production staff in an assigned area
Resolves standard and non-standard problems
Uses operational and supervisory expertise to solve problems within own area
Sets day-to-day direction for employees to support business objectives
Works within budget to meet operational objectives set by manager
Resolves routine problems using defined processes and own experience
Explains difficult issues and obtains agreement as needed
Manages performance of employees through task assignments, ongoing skill assessment and coaching

233

Safety Resume Examples & Samples

Bachelor’s degree in engineering or related safety or environmental field
Five or more years SHE and/or PSM leadership experience in a high hazard manufacturing environment
Strong knowledge of PSM systems and elements
Solid understanding of ISO14001
Solid understanding of and/or ability to interpret Corporate, Business, and Regulatory requirements and ability to work collaboratively with subject matter experts
Demonstrated SHE functional/technical expertise with strong knowledge of safe work practices, auditing, record keeping, investigation/RCFA, etc
Demonstrated knowledge of industrial hygiene principles and monitoring
Demonstrated knowledge of hazardous waste management regulations and practices
Six Sigma Greenbelt (or similar) and solid understanding of lean manufacturing and the eight wastes as they relate to both manufacturing and transactional processes
Demonstrated strong data management and analytical skills
Strong project management, organization, and prioritization skills
Experience with organizational culture change/development
Ability to train, coach, and mentor others
Strong leadership skills and ability to work independently and collaboratively
Specific knowledge of California laws and regulations
Experience implementing SHE-PSM systems
Certified Industrial Hygienist (CIH) or Certified Safety Professional (CSP), USDOT Hazardous Materials Transportation and/or RCRA Hazardous Waste Management certification
Lean/Six Sigma, Facilitation/Training of the Trainer, and/or instructional design

234

Head of Pre-clinical Safety Operations Resume Examples & Samples

PhD or DVM and post-doctoral experience in toxicology, biochemistry, pharmacology, cell biology or systems biology. In addition, the candidate should have knowledge in biochemistry, toxicology, pharmacology, biology, physiology, and pathology
Solid understanding of the drug discovery and development process based on more than 5-8 years of experience in pharmaceutical industry as project Team representative and ideally study director in the eSafety and investigative toxicology space
Hands-on experience with in vitro toxicology, pharmacology and/or molecular biology experimentation to investigate molecular mechanisms of drug action is critical
Experience with the design and execution of in vitro/in vivo experiments to determine the effects of therapeutics on biological systems, with line of sight to human safety risk understanding
Knowledgeable about regulatory nonclinical testing requirements for pharmaceutical development of biologics and small molecules
Strong leadership competencies and experience
Highly motivated, creative, innovative, reliable scientist, with a flexible, collaborative, team-oriented mindset, who solves problems in a goal-focused fashion
A social personality that contributes to an open, positive, collaborative working climate
Strong communication, presentation and influencing skills across levels/disciplines
Willingness to collaborate globally and to establish a fully aligned investigative toxicology environment across all engaged R&D Hubs
DABT certification and experience as GLP Study Director is preferred, but not required

235

Postdoctoral Research Fellow Safety Assessment & Laboratory Resume Examples & Samples

Formulate hypotheses addressing drug-induced mitochondria associated toxicities
Design, execute, and interpret in vitro and in vivo experiments in collaboration with interdisciplinary scientists
Analyze and explain experimental results with critical thinking
Publish in high quality, peer-reviewed scientific journals
Skills in cell culture
Experience in design and coordination of in vivo model studies
Strong knowledge of mitochondrial biology and biochemistry, and molecular genetics

236

Safety Lab Expert Resume Examples & Samples

Establishes and maintains local Safety Lab. Ensures that state of the art methods and equipment are used within the Safety Lab
Optimally assigns workload to Safety Lab personnel to support the Chemical Development Unit (CDU) project plans. Coaches Safety Lab personnel
Provides expert safety advice and process improvement suggestions to the CDU personnel as appropriate
Provides safety test results and advice to ChemOps as appropriate
Maintains collaboration with external service suppliers as needed
Reviews safety test results, suggests alternatives as appropriate, and is a primary contributor during the process risk analysis meetings
Signs risk assessment (i.e. the DERA) representing the Safety Lab
Represents the LSC on local Safety committees as appropriate
Solid background in organic, physical and technical chemistry
3-5 years of experience as chemist in a piloting, pharmaceutical or production environment advantageous
Open minded personality, able to work under pressure while keeping the focus on safety and reliability
Good teamplayer

237

Safety Assoc Supervisor Resume Examples & Samples

Requires Bachelor's Degree. EHS focus preferred
Minimum of three plus years of experience in the safety & environmental field. Preferably in a manufacturing environment
Strong communication, follow-up and influence skills
Demonstrated leadership skills with the ability to execute against an established vision and strategic plan with ability to manage change
High level of urgency to provide World Class results
Technical understanding of OSHA and Environmental Standards

238

Safety Evaluation Director Resume Examples & Samples

Manage a team of highly skilled technical professionals within the global Research & Innovation organization
Mentor and develop current product safety teams
Work with senior management on issues related to safety in terms of Company responses and positions on L'Oreal's products and safety protocols
Manage the long term mission of the group in evaluating raw materials and the clinical trials on the finished products
Work towards the harmonization of testing protocols and determinations of the necessary evaluations needed for raw materials and finished products
Follow APAC toxicology issues to identify those that may have legal and global regulatory impacts (CFDA guidelines, CHINA NIFDC programs, ASEAN Cosmetic Directives, KFMDS, etc)
Participate as a L'Oreal representative and product safety expert on EUCCC, CAFCCI, ACA and other external liaison task forces to monitor and address any safety-related issues as they arise
Assure raw materials approved for use comply with regulations in various countries and in compliance with corporate policies and guidelines
Partner with APAC Regulatory Affairs and Government Affairs in lobbying on strategic regulatory issues and helping shape the regulatory evolution in strategic countries for the Group in the APAC region
Ph.D. degree in Toxicology or related discipline from a university in major Western countries, along with a minimum of 10 years' industry experience is required; experience working in the cosmetics industry would be preferred but not absolutely required
DABT preferred
Technical expertise and credibility in the toxicology area combined with prior team leadership experience and the demonstrated ability to be a strong and effective manager of people
Knowledge of industry testing standards related to safety
Ability to do cutting edge, scientific work and serve as purveyor over a large number of multiple programs
Ability and willingness to lead strategy while also serving as a hands-on, roll-up-the-sleeves leader
Participation in various technical and liaison organizations within the industry
Ability to interact successfully within a Research & Innovation environment
Experience working in a Global organization
Ability to work in an exhilarating, fast-paced, highly matrixed environment
Flexible and adaptable
Multi-lingual with fluency in both English and Chinese (Mandarin)

239

On-site Construction Safety & Health Supervisor Resume Examples & Samples

Must be present on-site whenever work is performed
Responsible for administrating and promoting safety and health of all project construction staff
Analyze the materials to be used on site in order to design proper signage and disposal methods
PPE, determine the level of protection required to be provided to staff (must match the hazards they’re exposed to)
Once research is complete, may map out emergency evacuation plans, including locations for fire extinguishers and first-aid kits
As required also consult building codes, government regulations and other emergency response agencies in order to ensure that the workplace is compliant with health, safety and environmental regulations
Provide employee safety training to all staff including subcontractor staff
Certified safety professional with two (2) to five (5) years construction experience
Certified safety professional as recognized by the board of certified safety professionals with two (2) years of construction experience
Certified health and safety technician with 3-5 years construction experience

240

Director, Global Safety Resume Examples & Samples

Oversight of core activities tied to aggregate safety reports to ensure standardization and optimization from both a system and process perspective
Provide expert guidance on policies and procedures governing the processing of aggregate reports
Interpret FDA/EU Regulations and ICH Guidelines to ensure compliant individual case and aggregate safety reporting
Direct line management of Pharmacovigilance Specialists, Senior Pharmacovigilance Specialists and Associate Directors performing functions related to quality monitoring; responsible for the selection, training, supervision, development plans and annual performance reviews of direct reports
Collaborate with and maintain effective working relationships with the Global Safety community and external customers to ensure compliant adverse experience and aggregate safety reporting while also meeting quality standards
Oversight of aggregate case exchange activities with licensing partners
Management and oversight of the relevant SOPs and training material to ensure timely updates related to new and/or improved business processes evolving worldwide regulatory requirements, and quality and compliance findings
Prepare and respond to Regulatory Agency Inspections as well as internal and external audits
Monitors aggregate compliance and quality metrics and ensures implementation and effectiveness of appropriate actions
Oversight of core activities related to product/study/license configuration in Merck’s Argus safety database (MARRS) to maintain pharmacovigilance compliance globally
Cross-functional collaboration globally to ensure system configuration meets regulatory compliance requirements
Oversight of activities related to the configuration of relevant safety information in Merck’s Argus safety database (MARRS), requiring collaboration with Clinical Safety and Risk Management
Candidate is required to have at least 5 years of pharmacovigilance experience or related areas such as Clinical Risk Management, Clinical or Regulatory
Candidate is required to have at least 3 years of experience supervising/managing/leading
Functions with a high degree of autonomy
Strong knowledge base of Pharmacovigilance regulations as well as PV safety systems for collection of adverse experiences
Excellent time management, organizational and planning skills
Technically proficient in Argus Safety
Technically proficient in Microsoft Excel, Spotfire and other analytical tools
Ability to quickly address issues and develop solutions to minimize compliance risk, improve efficiencies and ultimately optimize business resources
Strong leadership and analytical competencies with excellent communication and interpersonal skills
Ability to quickly adapt to changes in workload and effectively manage resource pool and competing business priorities

241

Safety Engineering Expert, EU Resume Examples & Samples

Engineer degree with control system knowledge
Robotics knowledge
Conveyor control system knowledge
CE compliance knowledge
Credibility and be able to effectively engage and influence other functional leaders and their teams, to build buy-in to EU HS strategies and change processes
Used to operating at all levels of the organisation from warehouse floor to senior management
An in-depth understanding of essential/relevant EU & UK machinery directives
Demonstrable record of driving machinery safety standards across and large multi site business
Lean, 5S, Kaizen experience

242

Highway Safety Spec, GS Resume Examples & Samples

Travel required 25% or more of the time
Experience interpreting, modifying and developing guidelines
Experience providing guidance and interpretation of motor carrier regulations and policies
Experience applying laws, regulations, policies, and procedures related to evaluating motor carrier safety and compliance enforcement programs, including those concerned with the transportation and handling of hazardous materials

243

Scientific Fellow Safety Statistics Resume Examples & Samples

Independently represent Safety Statistics on global teams and projects in support of medical safety and observational studies for multiple compounds
Provide strategic statistical input to integrated analyses of safety or observational research for clinical development, post-marketing surveillance, regulatory submissions and publications
Provide statistical leadership in the development of statistical analysis plans, regulatory submission documents or publications, ensuring accurate and statistically valid deliverables for multiple compounds
Oversee all statistical and programming activities for medical safety or observational research for assigned compounds, including planning, data preparation or integration, table/listing/graph (TLG) production, and result interpretation
Provide oversight of vendor evaluation/selection and statistical and programming activities of external vendors to ensure quality and timeliness
Collaborates with other functions in research and implementation of advanced statistical methodologies for drug safety or observational research. Ensures that statistical methodologies are acceptable to regulatory agencies
Identify and interact with internal and external statistical experts for issue resolution related to medical safety or observational research
Provides leadership in development of innovative solutions to meet new challenges in drug safety (e.g., benefit-risk assessment) or observational research (e.g., OMOP initiatives). Drives development/selection and implementation of analytical tools for drug safety or observational research
Leverage scientific expertise for strategic statistical leadership by providing recommendations to management on challenging issues related data preparation/integration, statistical analysis and result interpretation
Monitor and implement advances in statistical methodology for medical safety or observational research, and promoting use of innovative methodologies for assigned compounds
Ensures compliance of function with Takeda SOPs, standards and all applicable regulations
PhD or MS in statistics, biostatistics, epidemiology, or equivalent
8+ years of experience for PhD or 10+ years of experience for MS in the pharmaceutical industry, clinical or observational research
Expert knowledge of integrated analyses of safety or methodology of observational studies
Active in statistical/pharmaceutical professional organizations at regional or national level
Advanced knowledge of the pharmaceutical industry including understanding of clinical drug development process and documents
Advanced knowledge of FDA and ICH regulations and industry standards applicable to medical safety or observational research
Experience in playing a leading role in contributing to critical publications, regulatory requests or submissions
Good statistical programming skills, and good knowledge of programming with respect to more complex statistical methods (eg, simulations)
Ability to sit and stand for long periods of time

244

Field Safety Rep Resume Examples & Samples

Respond to and help resolve safety related issues from the field organizations
Promote, develop, and implement safety leadership sessions as directed by local leadership teams
Develop and/or conduct formal safety training, presentations or seminars as required by local leadership teams
Actively support the SHE organization by participating in Corporate Safety, SHEPEX , Environmental and Process Safety initiatives as directed
Act as the key contact and subject matter expert for the assigned business area (Gas, Electric T&D, Generation, CMS etc)
Supervise/lead Field Safety Representatives as assigned
Ensure team communications with local leadership teams includes current injury trends, hazard assessments and compliance issues
4 Year Degree in a safety related field
Or-
16+ years operational/training experience with safety related duties

245

Occupational Safety / Health Analyst Senior Resume Examples & Samples

General OSHA program industry knowledge, including general knowledge of at least 4 out of the 5 following area: Electrical Safety (NFPA 70E compliance), Construction Safety programs, Fall Protection, Confined Space, and HAZCOM program knowledge
Must be able to travel approximately 50 – 60% of the time within the Western Service Area
Candidate will work under general supervision, possess initiative, and be self-motivated

246

Highway Safety Equipment Technician Resume Examples & Samples

Troubleshoots, diagnoses malfunctions, performs repair/modification work and maintains and certifies all types of evidential breath test devices and their associated accessories
Troubleshoots, diagnoses malfunctions, performs repair/modification work and maintains and certifies all types of alcohol screening devices and their associated accessories
Generates and verifies court-ready certification documents to identify any and all maintenance, repair, and modification work performed on electronic instrumentation
Sources and obtains inventory replacement parts required to repair instrumentation
Researches product specifications, performs all necessary repairs/modifications and conducts final inspections within all required standards and policies
Maintains both hard copy and computerized database to document all services performed on instrumentation
Provides expert courtroom testimony on the use, and maintenance of all types of evidential alcohol screening devices and their associated accessories

247

Safety Basis Analyst Resume Examples & Samples

Bachelor's Degree and 10+ years’ work experience or equivalent
Knowledge required of DOE requirements, guides and standards for the preparation and maintenance of the safety basis for nuclear facilities, including but not limited to documented safety analyses, technical safety requirements, and the un-reviewed safety question process
Skills required in applying analytical approaches and techniques used in safety evaluations to multiple facilities and operations; interpreting and integrating results into safety basis documents; oral and written communication of results
Knowledge required in the use of analytical methods for hazards and risk assessment, failure analysis, and radiological and chemical release consequence evaluation
Skill required in the maintenance of ANL and external technical relationships
Knowledge required of nuclear technology safety standards and practices; radiological materials use and controls; nuclear technology accident phenomenology; experimental tools and techniques; and nuclear criticality safety
Skill in leadership; supervising and directing technical staff

248

Director, Global Safety Resume Examples & Samples

Responsible for developing, executing and overseeing quality processes and ensuring global alignment across individual case, aggregate report management and system configuration
Identify opportunities for improvement or further enhancement within existing business processes
Monitors/analyzes quality metrics and ensures effective implementation of appropriate action plans by liaising with other divisions/stakeholders as appropriate to address quality issues
Responsible for continual evaluation of quality assurance plan to ensure effective and efficient processes within the AE Reporting organization
Direct line management of Pharmacovigilance Specialists, Senior Pharmacovigilance Specialists and Associate Directors performing functions related to quality monitoring; responsible for the selection, training, supervision, development plans, and annual performance reviews of direct reports
Liaise with Performance and Metrics management team regarding quality functions connected to compliance monitoring and investigations of late submissions with compilation of Health Authority and Business Partner compliance metrics
Engages members from the business as well as collaborates closely with IT to develop system and process solutions for potential and identified quality issues
Liaises and supports the Global PV, Medical Safety Review, CSRM, and the DMCs to ensure standardization and optimization of case entry quality from both a system and process perspective
Responsible for the implementation of quality initiatives and monitoring based upon new and/or updated regulations or ICH Guidelines to ensure cases are compliant with the regulatory standard globally
Lead cross-functional work streams to develop new PV quality standards and processes for emerging issues as well as to align on strategic approach for implementation of PV quality requirements
Prepares and responds to Regulatory Agency Inspections as well as internal and external audits

249

Safety Support Rep Resume Examples & Samples

Promotes a “Safety Above All” culture
Ensures accurate and complete safety forms and documents within the Safety Advisory Center group
Assists with researching safety-related technologies and other advances in Safety Management per DOT and OSHA regulations
Assists with supporting safety quality initiatives and quality action teams (QAT’s)
Reviews safety-related internal control results related to company’s compliance with and interpretation of federal, state, and local safety regulations and FedEx Ground Contract Service Provider, Independent Service Providers, and Linehaul agreements
Evaluates information received on Hazardous Materials Inquiries; determines necessary packaging, labeling, marking and documentation and directs customers/employees in proper procedures to ensure compliance with applicable governmental regulations; including accurate interpretation of regulations
Recommends accountability measures and compliance related to company’s compliance with and interpretation of federal, state, and local safety regulations and FedEx Ground Contract Service Provider, Independent Service Providers, and Linehaul agreements
Works and recommends campaigns, programs and prevention efforts based on current trends and regulatory changes
Resolves routine issues and respond to questions related to policy, procedure, and regulations
Two (2) years’ experience in safety, logistics, or related field preferred
Knowledge of concepts, practices, policies, and procedures related to safety

250

Safety & Health Professional Resume Examples & Samples

Provide employees and area management with the knowledge and skills necessary to recognize hazards and perform their jobs safely & effectively through training, scheduling, and presentation of data
Assess health and safety risks associated with equipment, materials, processes, facilities or personal abilities in order to identify and control conditions or actions that may cause injury or property damage. Conduct inspections and hazard evaluations of work areas in order to promote reduction of potential injury and indirect costs. Report findings to higher levels
Serve as the primary resource for assigned programs, providing related guidance and support to business areas, colleagues and management through training courses, inspections, written programs, and Safety Health and Environmental (SHE) program support and website content. Work with cross-functional teams to effectively and efficiently implement programs/processes across diverse work-groups and organizations. Facilitate inspections and other follow-up procedures to assure compliance with regulations and company requirements. Participate in best practice sharing with other Roche sites
Facilitate implementation of continuous improvement and compliance assurance programs to ensure the site complies with applicable regulatory and company requirements and is “inspection ready” at all times. Assist with government regulatory agency interactions relative to regulated health and safety programs, including reporting, notification, facilitating regulatory inspections, and ensuring closure of corrective actions
Manage relationships with contractors if needed along with applicable projects and program budgets as necessary
Support departmental SHE objectives, timelines, and goals

Download Safety Resume Sample as Image file

Related Job Titles

Safety Analyst Resume Sample

Safety Coordinator Resume Sample

Safety Supervisor Resume Sample

Health & Safety Resume Sample

Public Safety Resume Sample

Safety Inspector Resume Sample

Systems Safety Resume Sample

Safety Consultant Resume Sample

Safety Associate Resume Sample

Functional Safety Resume Sample

Regional Safety Resume Sample

Lead Safety Resume Sample

Browse More

Safety Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Safety resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Safety Auditing Professional Resume Examples & Samples

Safety & Health Internship Resume Examples & Samples

Disneyland Safety & Health Internship Resume Examples & Samples

Director of Safety & Toxicology Resume Examples & Samples

Services, Safety & Taxes Resume Examples & Samples

Medical Reviewer / Safety Reviewer Resume Examples & Samples

Safety & Health Professional Internships Resume Examples & Samples

Passive Safety Electronics Resume Examples & Samples

Mgr Safety, Health, Environ Resume Examples & Samples

Manager, Passive Safety Test Resume Examples & Samples

Medical Reviewer / Safety Reviewer Resume Examples & Samples

Mgr Food Contact Materials Safety Resume Examples & Samples

LP / Safety Supv Reg Resume Examples & Samples

Safety & Hazardous Material Analyst Resume Examples & Samples

LP / Safety Manager Resume Examples & Samples

Safety Route to Market Manager Resume Examples & Samples

Manager, Technical Safety Resume Examples & Samples

Cbna Gf Csis Security & Safety Manager Resume Examples & Samples

Safety & Risk Control Specialist Resume Examples & Samples

Safety Systems & Business Continuity Manager Resume Examples & Samples

Manager, Production Safety Resume Examples & Samples

Safety / OH Manager Resume Examples & Samples

Safety Ops Data Analyst Resume Examples & Samples

Safety Systems & Operations Manager Resume Examples & Samples

Manager Corporate Safety Resume Examples & Samples

Safety & Water Manager Resume Examples & Samples

Safety / Project Engineer Resume Examples & Samples

Policy Programs Manager, Global Safety Resume Examples & Samples

Director, Production Safety Resume Examples & Samples

Director, Production Safety Resume Examples & Samples

Mountain Safety Attendant Resume Examples & Samples

Mountain Safety Manager Resume Examples & Samples

Safety Policy Manager Resume Examples & Samples

Safety Systems Analyst Resume Examples & Samples

Mountain Safety Attendant Resume Examples & Samples

Safety Records Coordinator Resume Examples & Samples

Senior Manager, Engineering & Safety Resume Examples & Samples

Director, Engineering & Safety Resume Examples & Samples

Safety Principal Resume Examples & Samples

Lp / Safety Mgr > Mil Resume Examples & Samples

Mountain Safety Attendant Resume Examples & Samples

Ingredient Safety Data Manager Resume Examples & Samples

Mountain Safety Attendant Resume Examples & Samples

Mountain Safety Attendant Resume Examples & Samples

Ap & Safety Spec Resume Examples & Samples

Dir, Food Contact Materials Safety Resume Examples & Samples

Automated Driving Engineer Hazard Analysis for System Safety Resume Examples & Samples

Lp / Safety Mgr Resume Examples & Samples

Director of Safety & Risk Control Resume Examples & Samples

Safety Systems Specialist Resume Examples & Samples

Manager, Production Safety Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume