Mechanical Fitter Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the mechanical fitter job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

M Hyatt

Misael

Hyatt

31704 Lance Stravenue

Phoenix

+1 (555) 400 2336

31704 Lance Stravenue

Phoenix

Phone

p +1 (555) 400 2336

Experience Experience

Phoenix, AZ

Mechanical Fitter

Phoenix, AZ

Bernhard-Franecki

Phoenix, AZ

Mechanical Fitter

Prepares all work reports to be signed by Works Manager
Provide adequate hand over of information when handing over work to co workers and supervisors
Working independently through contributing to team efforts in achieving company objectives by attending and providing constructive input at site meetings
Be a Permit to Work holder for all work activities assigned to them
Those with the following tickets will be viewed favourably; Forklift License, Elevated Work Platform, Working at Heights, Rigging, Confined Space, First Aid
Develop close working relationships with operations personnel to ensure that all plant downtime issues are escalated correctly and remedied promptly
Maintain high quality standards to ensure that the executed work is in accordance with GE’s and our clients quality Standards

Chicago, IL

Plumber / Mechanical Fitter

Chicago, IL

Hansen-Fadel

Chicago, IL

Plumber / Mechanical Fitter

Building management system
Ensure all work is carried out to the highest standards of workmanship and safety
Undertake survey inspections including in confined spaces and at height recording all work and completing associated registers/logs
Undertake installations, testing, commissioning and basic repairs to plant and equipment
Ensure that any difficulties encountered on engineering activities are reported to the Engineering Supervisor /Manager as per escalation procedure
General Plumbing and Building Maintenance
Air Handling Units

present

San Francisco, CA

Lead Mechanical Fitter

San Francisco, CA

Legros, Gleichner and Will

present

San Francisco, CA

Lead Mechanical Fitter

present

Support for Engineering Team Leader with regards to day to day activities including reporting of performance and escalations of significant issues
Being conversant with pure steam generators, steam pipework, pressure and condensate systems
Support training and development of engineers in own shift / team
Provide day to day engineering support to the current Bulk Sterile Area of the Steriles Manufacturing Department
Provide day to day engineering support to the Sterile Manufacturing Department
Task management of Shift Engineering team, including direction and alignment of shift team to support production priorities
Participating in Risk Assessments on equipment and being proactive in closing out actions

Education Education

Bachelor’s Degree in Manual Dexterity

University of California, San Diego

Bachelor’s Degree in Manual Dexterity

Skills Skills

Strong technical capability with attention to detail
Be highly motivated, strong, confident and articulate. Be client facing and have good people skills and a sound communicator
Ability to gather, understands, analyse and interpret information and concepts. Verbal and numerical, about people or situations quickly
Ability to conceive innovative and cost effective solutions to problems
Any additional tickets such as EWP, Working at Heights, Forklift etc. will be highly regarded
Knowledge of Generation plant and equipment
Good verbal and written communication skills
National Working at Heights, EWP and Confined Space tickets are desirable
Well developed communication skills and good organizational skills
Good understanding of CMMS

Create a Resume in Minutes

15 Mechanical Fitter resume templates

Read our complete resume writing guides

Mechanical Fitter Resume Examples & Samples

To ensure all that all workscope is completed in a safe manner ensuring no detrimental impact to personnel, fabric or environment
To deliver a high quality, consistent and competent mechanical service in accordance with project / company requirements, standards and procedures
To support overall delivery of company goals and schedule along with site procedures
Read, understand and implement all applicable company / project policies, working practices and procedures, ensuring at all times that the joint integrity/ piping / assembly workscope is completed safely and to a high standard
Complete all workscope in accordance with applicable workpack / jobcard instructions, associated procedures and drawings / sketches
Provide support to other trades/disciplines where required, or form part of an integrated multi-discipline team
Undertake appropriate Risk Assessments (RA) in order to complete workscope in a safe and controlled manner

Mechanical Fitter Resume Examples & Samples

Ensure all work performed under his control is carried out in a safe, environmentally friendly, and efficient manner
Carry out Mechanical work scopes in line with his qualifications, abilities, and experience
Be a Permit to Work holder for all work activities assigned to them
Ensure all aspects of the Permit they are working on are complied with by those working under their Permit
Be familiar with the system being worked on when undertaking construction and maintenance works and seek the advice of their supervisor if required
Interpret spare parts and service / repair manuals and / or schedules
Promote friendly working relationships between individual team members and the greater shutdown team
Provide adequate hand over of information when handing over work to co workers and supervisors
Report any issues affecting his work to his supervisor
Report to the Mechanical Supervisor on status of daily activities and work progress
Ensure compliance with safe work practices at all times
Be responsible for your safety and the safety of others who may be affected by your actions or omissions
Review the Permit to Work and sign the permit acknowledging compliance with its conditions
Participate in the development, review, and update of the JHA’s. Upon completion, personnel shall sign the JHA in recognition of understanding the requirements
Ensure completion of Stepback 5X5’s
Report hazards and incidents
Attend and participate toolbox meetings
Complete work in accordance with appropriate licences, certificates of competency and / or trade qualifications
Must at least be a High School Graduate
Minimum of five (5) years work related experience, preferably in an offshore industry
Recognized Mechanical Trade qualification
Preferably experienced in Confined Space entry, working at heights and breathing apparatus
Knowledge and practical experience of hydrocarbon production systems
Understand what is an unsafe act or situation
Well developed communication skills and good organizational skills
Reading and interpreting of technical drawings and procedures
Ability to work in a flexible work and team environment by following “best practices” pertaining to the oil and gas industry
A sound technical knowledge of mechanical codes standards and regulations
Ability to assess activities to ensure that the work completed in a safe manner
Ability to conceive innovative and cost effective solutions to problems
Current Offshore Survival Certification and Medical Certification
Must be able to work flexibly as part of a team; possible allocation to other projects

Indentured Skilled Mechanical Fitter / Tester Resume Examples & Samples

Producing product to engineering drawings and instructions
Mechanical fitting of Environmental Control Systems
OCQ - Operator Control of Quality
To achieve on time delivery by ensuring work is completed on time and to the required standard
Interpreting engineering drawings, following the process layout and documentation procedures
Engineering Apprenticeship (Desirable but not Essential)
Knowledge of mechanical fitting applications
Knowledge of pressure testing
High standard of Health & Safety
Adhering to Company Processes & Procedures
Working in a Customer-focused environment and achieving targets
Working with Designers and Engineers
The position requires the applicant to have an understanding of Aerospace practice and the significance of the safety critical work undertaken (Manufacturing experience also considered)
Ability to read and follow instructions
The applicant should be able to display essential skills in the adherence to Health & Safety standards at all times, teamwork, flexibility and the ability to use initiative
Continuous Improvement
Any further training requirements will be provided:- PC skills (PDM & SAP), Manual Handling, Abrasive Wheels, 5 S’s, Lean (KanBans, Line Side Stock, etc.) and general Health & Safety

Maintenance Mechanical Fitter Resume Examples & Samples

Mechanical trade certificate id essential
Minimum 3 years’ experience in a similar role within the FMCG industry
Comfortable working with computerised maintenance management systems and proficient in MS office suite
Ability to work both independently and as part of a team
Sound analytical, problem solving & fault finding skills

Leading Hand Mechanical Fitter Resume Examples & Samples

Relevant trade qualification in a mechanical, and/or hydraulic related trade
Previous experience in maintaining hydraulic systems
Previous experience in fault finding on mechanical and hydraulic systems
Previous supervisory experience as a leading hand would be beneficial
Previous experience working on underground development mining equipment
Sound computer skills – Word, Excel, Kronos, SAP would be beneficial
Demonstrated ability to prioritise and plan jobs

Mechanical Fitter Resume Examples & Samples

Repair and install mechanical equipment on various assets types and locations across the AW region often in challenging conditions
Be expected to produce high quality work working with electricians, instrumentation technicians and operations staff
Be able to swiftly and comprehensively fault-find, rectify problems on mechanical equipment including sewage pumps and valves and associated pipe work, air blowers, wastewater inlet screens, storm water screens, biological filter equipment, tanks, tank bridges
Install, maintain and repair mechanical systems generally
Maintain, repair and installation of mechanical. Electrical and instrumentation to ensure performance of all assets
Actively take part in risk assessment, COSHH assessment and all related Health and Safety issues
Identify problematic plant and the subsequent faults and to take part in finding efficient solutions to return equipment to working order
Provide knowledge, information and provide on-site support for AW capital teams, Operational teams and partners
Day to day liaison with operational staff
Fully qualified mechanical fitter
CSCS Card
Experience of the waste water industry desirable
Full UK Driving Licence
An excellent understanding of planning and scheduling of work processes
Demonstrate the ability to read, understand and work from technical drawings
You will be expected to be able to work well and safely as part of a team
Ability to gather, understands, analyse and interpret information and concepts. Verbal and numerical, about people or situations quickly

Mechanical Fitter South Bristol Hospital Resume Examples & Samples

Report directly to the Site Supervisor and interface directly with CAFM for the issue and feedback of work on a daily basis
Record all details of planned and reactive work carried out
Pre-Planned maintenance, testing, breakdown and installation work
Experience of maintaining mechanical systems including
Air handling plant serving ventilation systems for Theatres and general service areas
Experience of overhaul of pumps and/or air conditioning systems
Water systems including sanitary ware, fittings and drainage
Develop designated skills, where agreed with post holder to provide specialist on site knowledge for specific maintenance roles
Be flexible and adaptable in relation to working hours and provide maintenance cover by partaking of an ‘On-Call’ duty rota covering 24/7 approx. every 4-5 weeks
Carry out all duties in compliance within statutory and HTM guidance
Within a maintenance environment the post holder will occasionally be expected to carry out any reasonable request for which they have received training and are considered competent
Assist in any other activity where a competent person is in attendance
Understand the principles of H&S management procedures
The Post holder may be required to carry various communication devices and use them in a way determined by the Facilities Manager
Skilled in FM positions
Time served craftsperson with a recognised mechanical qualification
An effective communicator both written & oral
To plan, prioritise and allocate work
Self-disciplined and able to work on own initiative
Flexible and adaptable approach to work

Mechanical Fitter Resume Examples & Samples

Overhauling, root cause analysis & repair of (traction) gearboxes & motors in line with order instructions requirements, to meet customer expectations & industry standards alike
Efficient disassembly/reassembly in line with productivity improvements and capacity planning (achieve the required efficiency and utilization standards for production – i.e. performance/assembly to build times)
Take responsibility for H,S & E and ensure control measures are in place. Actively support zero harm culture; specifically the recording of near misses, reporting of accidents/incidents and assist the Zone Owner with completion of any risk assessments in the production work area
Participate in any continuous improvements activities, including workshops and discussion groups relating to quality, cost and delivery performance. Assist and support the implementation and promotion of continuous improvement within the production area
Awareness and contribution to Company targets in relation to quality, cost and delivery
Support, lead, train and mentor others (including apprentices). Lead by example and encouragement, ensuring that best assembly practices are introduced, maintained and improved
Contribution and participation in production meetings as and when requested
Participation and involvement with Company Quality Procedure and Standards, ensuring timely identification, communication and recording of all quality issues. Ensure that all quality procedures are followed and adhered to at all times
Assist, support and promote 5’s activities within the production area
Mechanical investigation of rotating equipment (gearboxes & motors)
Implementation & execution of quality checks to Industry Standards
Mechanical and electrical overhauls of traction gearboxes & motors (disassembly and assembly)
Mechanical and electrical inspection of gearbox & motor parts
Failure and root cause analysis including vibration analysis (unique or serial defect, manufacturing or material issues)
Responsibility for the tooling & equipment (set up of equipment and calibration of instruments)
Mechanical Engineering qualifications and previous experience of working on motors & gearboxes
Significant experience in a mechanical engineering environment
Understanding of specifications, engineering drawings and principles
Familiar with office software and IT
Prepared to travel and work outside normal hours to meet business needs and initial training period
LI-HR

Field Service Mechanical Fitter Resume Examples & Samples

Ensure that work performed on Joy Global equipment on site is to an appropriate standard
In conjunction with the Customer, develop and refine work scopes for scheduled work and repairs
Maintain quality control standards in accordance with the requirements of the Quality Assurance Procedures Manual
Management of service delivery against targets with a view to being recognised as ‘best in class&#8217
Maintain a close working relationship with the Customer to ensure delivery against expectations
At all times, comply with Customer safety standards and Joy Global safety requirements
Trade or Engineering Qualification
Previous experience in the mining industry or related heavy industry
Prior experience on Electric drive loaders/equipment and/or electric shovels would be advantageous
Demonstrated ability to interpret electrical schematics, mechanical and engineering drawings
Demonstrated problem solving ability
Full understanding of Mine Site Safety and Environment protocols

Plumber / Mechanical Fitter Resume Examples & Samples

Carry out planned/response maintenance on various plant and systems including domestic plumbing services, Local Exhaust Ventilation, Hot Water, Steam and Compressed Air
Installation of pumps, valves and pipe work on various services/systems
Produce a quality end product first time with no re-work required
Qualify for entry in Skilled Persons Register
Organise work to minimise lost time, or non productive time
Accurately record details of repairs and complete weekly timesheets
Respond to emergency call outs as and when required – part of 24 hour response duty roster
Required to occasionally work in the field or on the mountain top radar sights
Carry out any other duties as directed by your line manager, or Management team
Educated to GCSE or equivalent
Completed and passed an approved apprenticeship or attained a minimum of an NVQ level 2 in an appropriate discipline
Familiar with all types of oil burning plant and generally have a strong mechanical background
Working knowledge of compressors, compressed air systems, mechanical doors, lift ramps, kitchen equipment, and steam boilers
Must be able to carry out new works from a written specification with minimum supervision
Good working knowledge of H&S legislation
Full driving license
Ability to work on own initiative or as part of a team
Experience of working abroad
Experience of an MOD environment

Mechanical Fitter, Sydney Resume Examples & Samples

Keeping repair records and ordering materials
Be competent with shaft and coupling alignment techniques, bearing, pulley, gear and sprocket replacements
Be able to work a roster if required, which may include weekends and public holidays

Mechanical Fitter Resume Examples & Samples

Complete Mechanical Fitting and other tasks as directed of the Site Manager / Site Supervisor
Good knowledge of mechanical fitting and machining techniques
Maintain strong safety standard to ensure that the executed in accordance with GE’s and our clients safety standards
Maintain high quality standards to ensure that the executed work is in accordance with GE’s and our clients quality Standards
Respond to requests for emergency repairs and services to GE’s customers
Mechanical Trade Certificate
Professional experience working on Hydro Power Generation refurbishment projects
Willingness and ability to travel to and work on projects within New Zealand and overseas as required
Ability to work as part of a multidisciplinary team
A willingness and desire to develop skills and further expand technical knowledge and expertise in the Hydro Power Generation Industry
Ability to think for yourself and come up with solutions to problems

Plumber / Mechanical Fitter New Resume Examples & Samples

Undertake installations, testing, commissioning and basic repairs to plant and equipment
Ensure allocated, planned maintenance and small repairs are carried out, undertake service requests raised by the computer aided facilities management system
Escort technical contractors ,working with and supervising them in accordance with Local Security Strategy (LSS) when required
Must be able to display competency in the use and operation of all associated power tools, machinery and equipment
Previous experience working in a similar working environment or Facilities Management role would be advantageous

Mechanical Fitter Resume Examples & Samples

Maintaining high speed wrapping machines (GDs, CD,s flow wrappers), conveyor belts, pumps, chillers, cookers, heat exchangers, cooling tower, operating workshop machinery such as lathes, mill and grinders, welding equipment
Carrying out installation of new equipment or modifications to existing equipment
Continuous improvement and breakdown analysis (BDA)
Adhering to safety and environmental standards and demonstrating positive behaviours in these areas
Ensuring high quality product through following standards and Good Manufacturing Practices (GMP)
Operating and maintaining pneumatic equipment
Excellent fault-finding & problem solving skills
5 years post trade experience preferred
A willingness and ability to learn new processes
Computer literacy and proficiency with SAP or a similar maintenance management program
Good mechanical aptitude and strong problem solving skills
Proactive cooperation and a demonstrated ability to work well in a team environment
Good time management skills and the focus to work under pressure when required
The initiative and courage to speak out when correction is required

Mechanical Fitter & Machinist Resume Examples & Samples

Demonstrated commitment to Safety
Relevant trade qualifications in mechanical fitting and machining
5 years + experience working in an industrial manufacturing environment
Strong time management skills with a demonstrated ability to prioritise and plan jobs
Proven decision making skills
Dogging, EWP and Forklift tickets would be considered highly desirable

Plumber / Mechanical Fitter New Resume Examples & Samples

Carry out all PPM tasks in accordance with the annual PPM Planner, and notify any repairs as necessary
Ensure all record keeping functions are completed on a daily basis
Must hold a minimum of Vocational Qualification at Level 2 as an plumber or related area

Plumber / Mechanical Fitter Resume Examples & Samples

To be available to respond & repair any reactive calls rose through the onsite Helpdesk
Ensure that any difficulties encountered on engineering activities are reported to the Engineering Supervisor /Manager as per escalation procedure
On reasonable request be available to work overtime to accommodate the sites requirements

Mechanical Fitter Resume Examples & Samples

Excellent knowledge of petrol/diesel engines
Good mechanical knowledge
Abel to inspect, repair and maintenance of equipment
Able to work on your own or in a team
Take full ownership and responsibility of your work
A great work ethic
Able to think on your feet

Mechanical Fitter / Machinist Resume Examples & Samples

Work as part of a high performing team to achieve team and business objectives. Role will function in self directed team environment
Ensure team compliance to GE Quality, EHS and other policies are adhered to at all times
Actively participate in the teaming model, including but not limited to teaming meetings and fulfilling the functions or duties decided by the team on a rotational basis
Conduct overhauls, machining and repairs on Traction Motors, Alternators and Blower Motors
Conduct static and dynamic testing of electrical equipment
Estimate, description of problems, and/or expected serviceability
Test electro-mechanical equipment to troubleshoot known or suspected problems using various methods
Disassemble electro-mechanical equipment noting parts identification, configuration, and condition
Clean electro-mechanical equipment assemblies using various methods and steps, including, but not limited to: parts washers/steamers glass beads blasting, etc
Use precision measurement tools and equipment to determine serviceability and accurate notation of results
Replace or repair worn or defective mechanical or electro-mechanical assemblies, including, but not limited to: bearings, brushes, brush holders, motor leads, seals, impellers, mechanical switches, fans, coils, and shields
Re-test reassembled electro-mechanical equipment for proper output and operation
Prepare cost estimates for repair of products including description of the problem, and/or expected serviceability
Complete required paperwork for each job accurately and on a timely basis
Operate specialized repair and testing equipment and other equipment as needed
Proven ability to identify report and address risks and work safely in manufacturing/repair facility
Possession of engineering trade Qualification Certificate III in engineering – Mechanical trade or equivalent
Demonstrated ability to repair, machine, or fabricate large work pieces
Sound communication skills including – concise verbal skills, the ability to write short technical reports and actively listen
Proven ability to give and receive feedback to facilitate personal growth and the growth of other team members
Flexible and adaptable customer solution focused attitude
Demonstrated high attention to detail
Demonstrated ability to perform complex problem solving
Adhere to all company policy, procedures and training regimes
Possession of or commitment to obtaining High Risk Work Licences – Forklift, Dogger or Rigger tickets
Soldering qualification or experience desirable
Brazing and/or Welding qualifications and experience desirable
Experience in the repair, machining and overhaul of Medium and High voltage electrical motors and generators or equivalents desirable

Mechanical Fitter Resume Examples & Samples

Assemble and manufacture products in line with works order instructions requirements, to meet customer expectations
Efficient assembly in line with productivity improvements and capacity planning (achieve the required efficiency and utilization standards for production – i.e. performance / assembly to build times)
Take responsibility for E, H&S and ensure control measures are in place. Actively support zero harm culture; specifically the recording of near misses, reporting of accidents/incidents and assist the Zone Owner with completion of any risk assessments in the production work area
Take ownership and responsibility for one or more E, H&S related tasks within a Zone/s; if appropriate take responsibility of a designated E, H&S Zone
Participate in any CIP (Continuous Improvement) activities, including workshops and discussion groups relating to quality, cost and delivery performance. Assist and support the implementation and promotion of continuous improvement within the production area
Participation and involvement with Company Quality Procedure and Standards, ensuring timely identification, communication and recording of all quality issues and referrals (i.e. kitting problems, accurate completion of quality check lists, component quality etc). Ensure that all quality procedures are followed and adhered to at all times
Sub - Assemblies
GM (MOTOX / SIMOGEAR)
SGU (Standard Gear Units) (FZG, SIG, SIP)
Wind Gear Units
Rail Gear Units
Inside Service / Repair, including reporting and diagnostics
Outside Service/Repair (as and where required)
Engineered Solutions / Applications (Projects)
Legacy Products
Machine Shop
Inspection and Test
5's
E, H & S (including Zones and Tasks)
Training activities and Workshops

Mechanical Fitter Resume Examples & Samples

Grade B Mechanical Fitters must possess knowledge of the most economical and effective layout of mechanical installations together with the ability to achieve a high level of productivity in the work which they undertake
Must be able to apply a working knowledge of mechanical equipment, including appropriate installation techniques
Must possess particular practical, productive and mechanical engineering skills with adequate technical knowledge so as to be able to work on their own proficiently and undertake work efficiently and economically with minimal supervision
Ability to undertake mechanical installation work safely and in accordance with industry best practice, client specifications and Industry Safety Regulations
Must be able to undertake detailed mechanical installation tests and verification
Interpret design information and client specifications
Must be able to liaise with and build good working relationships with clients representatives
Lead mechanical teams ensuring that work progresses in accordance with agreed programme
Ability to set out complex mechanical installations
Adhere to strict timescales for installations as detailed within agreed Project programmes
Completion of site reports, detailing progress and areas of delay
Production of material lists in a timely manner in order to facilitate efficient procurement
Wear the correct PPE and follow all safety rules and safe working practices
Any other comparable duties as requested
Hold a CSCS Card
Competent at operating hand tools, test instruments and equipment

Diesel Mechanical Fitter Resume Examples & Samples

Carry out maintenance and overhaul of cylinder heads, fuel injectors, fuel pumps, turbo chargers and associated equipment of various diesel engines to include Ruston RKC8, Lister Dorman, Deutz, Perkins and Cummins to a very high standard and in accordance with manufacturer’s specifications and instructions
Ensure within the Power Stations all associated machinery and systems to include Air Systems, Compressors, Pumps, Oil and Water are maintained to a high working standard and are in accordance with manufacturer’s specifications and instructions
Fully comply with Interserve’s and the Client’s Quality Standards and ensure that all maintenance log books and documentation is correctly and accurately filled in
Attend Emergency First Aid and Fire Fighting workshops to qualify for entry to the Skilled Persons Register
Be prepared to work on MoD remote sites within the Falkland Islands
Respond to emergency call outs when required
Carry out any other duties as directed by your line manager, or management Team
Educated to GCSE levels in English and Maths or equivalent
To have completed and passed an approved apprenticeship or attained a minimum of NVQ Level 2 in an appropriate mechanical fitter discipline
Familiar with compressors, compressed air systems, mechanical doors, lift ramps, generators
Must be able to carry out new works from written specification and drawings with minimum supervision
Must have a full clean driving license
Experience of working abroad and in an MoD environment would be advantageous
Experience of POL environment advantageous

Mechanical Fitter Apprentice Resume Examples & Samples

Assemble original/refurbished specialist vehicles and equipment complete to customer’s specification as outlined in the customer’s order
Work must be of a very high standard and quality in accordance with ISO 9001, ensuring vehicle reliability and appearance is maximised
Ensure the Quality Control documentation (VQD) has been signed and completed in the correct manner
Provide technical support to those employees who have limited product knowledge
Ability to work independently as well as contributing to a successful team and collective ownership of the vehicle throughout the assembly process

Lead Mechanical Fitter Resume Examples & Samples

Time Served Engineering Apprenticeship (Mechanical) and / or relevant industry experience within Mechanical Maintenance
Experience within a manufacturing environment, ideally within Pharmaceutical or the FMCG industry
Experience of mechanical maintenance within a production environment on production equipment and facilities
Experience of leading and / or supporting a team of engineers is also highly desirable
City & Guilds / HNC / ONC within mechanical engineering would be highly desirable
Experience of Heavy Mechanical maintenace
Experience of using Maintenance Management systems
Computer literate
Good interpersonal skills
Flexible approach
Ability to work in a highly regulated environment
Willingness to learn and take on additional roles
Able to work in multidisciplinary teams
Strong fault finding approach
Provide day to day engineering support to the Sterile Manufacturing Department
Carry out routine engineering maintenance activities to manufacturing equipment and plant services, as well as reactive maintenance and line changes
Maintain accurate records and information for the site maintenance systems
Day to Day fault diagnosis if equipment problems (i.e. Pressurised steam vessels, purified water and steam plants, Glycol systems and nitrogen systems)
Task management of Shift Engineering team, including direction and alignment of shift team to support production priorities
Support for Engineering Team Leader with regards to day to day activities including reporting of performance and escalations of significant issues
Support training and development of engineers in own shift / team
Ensuring compliance with EHS and Quality requirements in any activities completed
Championing Continuous Improvement in team, identifying and implementing engineering improvements (equipment or ways of working) that deliver benefit to the Sterile Value Stream and support site objectives

Mechanical Fitter Resume Examples & Samples

Provide technical expertise within the maintenance team to facilitate planned, unplanned and or breakdown maintenance
Develop close working relationships with operations personnel to ensure that all plant downtime issues are escalated correctly and remedied promptly
Provide continual feedback to the maintenance supervisor on job/task progress

Mechanical Fitter Resume Examples & Samples

Valid Trade Test Certificate (Mechanical Fitter)
Knowledge and experience in the overhauling of pumps, packaging equipment, conveying equipment, pneumatics and hydraulics
Minimum 4 years general mechanical fitting experience
At least 4 years’ experience as a Mechanical Fitter in an FMCG environment
Computer Literacy (email & SAP)
Hands-on person with excellent problem solving skills
Honest and Assertive
Flexible
Good workmanship
Positive can-do attitude
Innovative thinker
Willing to work weekends and over public holiday as required from time to time
Medically fit
Valid drivers license & own transport

Mechanical Fitter Resume Examples & Samples

Cert III Mechanical Fitting OR Trade Certification in Mechanical Fitting
Experience in Hazardous Area maintenance
Process Plant Operation certification would be advantageous
High Risk certifications such as Confined Space, Working at Heights, EWP and First Aid would be advantageous
Have a solid understanding of pumping, pneumatics, trade waste and bulk fuel installations equipment and the relevant codes and industry standards
Valid Australian Drivers Licence

Mechanical Fitter Resume Examples & Samples

A demonstrated commitment to safety as a way of life
Prior experience in open cut mining maintenance
Experience in maintaining and servicing excavators, mobile earthmoving equipment and fixed plant
Knowledge of conducting safety inspections and completing JSEA’s, Risk assessments & Permits
A commitment to being an effective team player ; and
Willingness to work a 24/7 rotating shift roster

Mechanical Fitter Resume Examples & Samples

Stripping a variety of Decanters in preparation for inspection
Cleaning of equipment in order to service/repair, including jet washing and chemical cleaning
Dismantling and reassembling of gearboxes
Rebuilding equipment following guidelines
Use of technical drawings to assist in disassembly and re-assembly
Using a variety of standard hand tools
Using a variety of special tools
Handling medium to heavy duty equipment
Operating overhead cranes and lifting equipment
Understanding of Health and Safety and correct PPE

Mechanical Fitter Resume Examples & Samples

Undertaking programmed and reactive maintenance on a wide variety of water industry assets
Maintaining critical assets including chemical dosing systems, compressors, pump stations, power generation equipment and disinfection systems
Liaise with operational staff as required to ensure plant operational performance is maintained and critical process issues are diagnosed and resolved

Lead Mechanical Fitter Resume Examples & Samples

Time Served Mechanical Engineer experienced in pharmaceutical process equipment
Reactive and proactive maintenance experience
Experience of working alongside engineers from other disciplines to resolve issues collectively is also highly desirable
City & Guilds / HNC / ONC within mechanical engineering
Proven track record in a regulated environment working to GMP standards e.g. Pharmaceutical, Food, FMCG
Provide day to day engineering support to the current Bulk Sterile Area of the Steriles Manufacturing Department
Carry out routine engineering maintenance activities to manufacturing equipment and plant services, as well as reactive maintenance and turnaround activities
Day to Day fault diagnosis if equipment problems (i.e. Sterile process equipment, Pressurised steam vessels, purified water and steam plants, Glycol systems and nitrogen systems)
Championing Continuous Improvement within the engineering team, identifying and implementing engineering improvements (equipment or ways of working) that deliver benefit to the Steriles Value Stream and support site objectives
Participating in Risk Assessments on equipment and being proactive in closing out actions
Supporting the shift with practical involvement in LOTO, Ergonomics, PUWER, and Manual Handling and ensure compliance with the standards
Supporting the failure mode, effects and criticality analysis (FMECA) process for equipment, feeding back information to the teams and across shifts where required
Being conversant with pure steam generators, steam pipework, pressure and condensate systems

Mechanical Fitter Resume Examples & Samples

Taking ownership and being involved and committed to achieving a safe workplace, including working towards achieve a zero harm work environment while striving for continuous improvement on EH&S performance
Working independently through contributing to team efforts in achieving company objectives by attending and providing constructive input at site meetings
Have mechanical or maintenance fitter trade qualification(s), as well as a fork lift licence and confined space licence
Experience in welding and fabrication
Have strong competency with welding, pneumatic controls, hydraulic equipment (specifically for grain handling), fans, pumps and related equipment
Have good interpersonal and communication skills
Be physically competent to partake in activities within an industrial environment
Be available to work after hours and on weekends where required and as part of an on-call roster

Mechanical Fitter Resume Examples & Samples

Apprenticeship or level 2 NVQ equivalent in relevant trade discipline
ONC in an engineering discipline or City and Guilds in a related trade or an NVQ level 3 in a related trade
Experience in the installation of rotating equipment and the alignment there of is essential for this role
BOSIET / MIST / EBS
Experience in using P.T.W or I.S.S.O.W
Working at Height Awareness
Manual Handling Awareness
Industrial experience in fabrication and construction
Experience in offshore construction and knowledge of P.T.W or I.S.S.O.W
Please upload certificates and qualifications at the time of application

Mechanical Fitter Resume Examples & Samples

To maintain the serviceability of the Joint Operational Fuels System (JOFS) and the MoD’s fleet of Aviation Refuelling Vehicles
Carry out preventative and corrective maintenance, diagnostic fault finding, inspections and modifications to vehicles and refuelling equipment
Routine servicing of Hydraulic power packs
Refurbishment and testing of refuelling couplings
Assembly and testing of hose assemblies
Refurbishment and testing of breakaway couplings
Carry out training/mentoring of apprentices
Driving through continuous improvement
Ensure that the facilities, and those that work in the facilities, apply the principles of Quality, Health and Safety, COSHH, Engineering Hygiene, Risk Assessments and safe working practices in a hazardous environment
A recognised Mechanical Engineering Apprenticeship, City & Guilds or NVQ3
Be highly motivated, strong, confident and articulate. Be client facing and have good people skills and a sound communicator
Substantial knowledge of the principles and construction of Bulk Fuel Handling Systems, Aviation Refuelling Vehicles and the working of their major components
3 years’ experience in the assembly, refurbishment and testing of aviation refuelling hose and couplings
A thorough understanding of the operation and testing of hydraulic, pneumatic and electrical systems
Planned and reactive maintenance management, including scheduling major servicing & minor refurbish/regeneration programs
Working within an ISO 9000 compliant environment
Understanding and appreciation of the underlying principles of ISO 14000 and ISO 18000 compliance. Have a comprehensive knowledge of Lean Engineering & Quality Inspection techniques
The candidate is expected to be computer literate in Microsoft Office, including Excel, Word and Outlook
Security SC vetting
Full driving licence including C+E

Mechanical Fitter Resume Examples & Samples

Routine checking and monitoring of Plant and Equipment operation to ensure optimum plant performance and compliance with contractual requirements
Manual plant operational duties as required; including assisting with bulk deliveries to, and removals from the plant
Calibration and testing of plant equipment, alarms, and instrumentation in accordance with CMMS, Vendor recommendations, and/or contractual requirements
Completion of all Planned Mechanical and Electrical Maintenance required in accordance with CMMS, and recording completion of same with CMMS
Timely response to plant/equipment failures with plant repair or replacement as appropriate, and recording completion of same with CMMS
Problem solving and trouble-shooting mechanical, process and electrical problems and application of good working principles
Identification and management of appropriate spares required to ensure reliability of plant operation
Use of remote monitoring tools as appropriate to verify plant condition. Availability for response to plant failures outside normal operation hours in accordance with roster for same, and general availability to assist in remote trouble shooting where appropriate
Suggestions to improve plant reliability, operational efficiency in conjunction with Plant Manager
General maintenance duties required for plant tanks, buildings and landscape
All duties to be carried out in accordance with relevant safety procedures, documentation and training
Responsibility for ensuring that all work is carried out accurately and with due diligence
Organising , planning and prioritising your work
Effective guidance and training of delegated resources
Effective time management and execution of work within defined timeline and budgetary constraints
Plan and co-ordinate all shutdowns in conjunction with management
Ensure continued improvement for more efficient production of plant and maintenance work
Ensure Health & Safety, Ethical and Quality requirements, both legislative and company specific, are fully respected and taken account of
Carrying out maintenance activities of equipment such as conveyors, bag filters, drum thickeners, centrifuges, compressors, mixers in above ground and confined space installations
Carrying out maintenance and repair of electrical installations including panel fault finding, VSD replacement/installation, maintenance of site lighting and electrical services
Assisting with equipment installation including routing of cables through underground ducting, motor mounting, cable termination and carrying out commissioning checks
We require a trade qualification and experience in the above duties
This position requires that you be flexible and available outside of the normal working week to provide/organise immediate assistance to Plant Managers, Operators and Clients
Must be able to effectively troubleshoot mechanical and electrical problems/breakdowns
Must be self-motivated and have the ability to work in a team and/or on own initiative
Strong technical capability with attention to detail
Expertise and knowledge of a WTP and a WWTP
Strong Problem solving and trouble-shooting skills
Good understanding of CMMS
Effective time management and Communication skills

Mechanical Fitter Resume Examples & Samples

Trade qualification
Hazardous environment experience
Minimum 5 years maintenance experience
Terminal experience
PSV Testing experience
Pump experience - Alignment and mechanical seals
Demonstrated experience with routine and breakdown maintenance
Significant exposure in an oil and gas environment
Proven experience working independently
National Working at Heights, EWP and Confined Space tickets are desirable

Mechanical Fitter Resume Examples & Samples

Trade Certificate / National Certificate
Trade experience and qualifications
Knowledge of Generation plant and equipment
Current (NZ) Motor Vehicle Licence
Any additional tickets such as EWP, Working at Heights, Forklift etc. will be highly regarded

Mechanical Fitter Resume Examples & Samples

Mechanical Fitting
Work accurately to a job scope
Troubleshoot and repair motors/generators and recommend changes
Recommend modified procedures to improve performance and customer satisfaction
Disassembly of large electric motors and generators
Assess condition of motor/generator as required
Conduct detailed inventories and inspections to determine necessary maintenance and repairs
Experience with White Metal bearings is essential
Reassembly of motors and generators required
Prepares all work reports to be signed by Works Manager
Plan jobs to co-ordinate repair activities and be organized with tools and work methods
Ensure safe working procedures and practices are followed at all times
Mechanical Fitter Trade Certificate
3 years plus trades experience with Rotating Electrical Equipment such as Motors and Generators
Relevant skills in the repair of Electric Motors, Alternators and DC motors
Significant experience in able to disassemble, reassemble and conduct electrical tests on large motors
Must be able to replace parts & assemblies as well as use measuring equipment accurately
Ability to use measuring equipment both Electrical and Mechanical
Operate Forklift and strong focus on safety
Occasional Travel to customer sites will be required in this position

Mechanical Fitter Resume Examples & Samples

Carry out a variety of maintenance tasks in support of a variety of precinct assets
Conduct planned maintenance activities, condition monitoring and other preventative tasks
Operate with a proactive approach in fault finding and trouble shooting
Monitor data and utilise a Computerised Maintenance Management System
Liaise with a variety of stakeholders on a relevant technical issues
Ensure policies are adhered to, quality outcomes are delivered and continuous improvement is a focus
Complete required training in the operation of reticulated systems when required
Carry out other duties as required by the Mechanical Supervisor
Mechanical trade qualification (Fitter Machinist) with significant post-trade experience
Strong machining skills and demonstrated experience gained within a maintenance environment
Proven fault finding, diagnostic and trouble shooting skills, with a strong overall mechanical aptitude
Well-developed interpersonal skills teamed with an ability to work autonomously
Intermediate computer skills and experience in the use of Computerised Maintenance Management Systems
Responsive, proactive approach in meeting required deadlines as part of a team
Demonstrated commitment in relation to health, safety and environment
Those with the following tickets will be viewed favourably; Forklift License, Elevated Work Platform, Working at Heights, Rigging, Confined Space, First Aid