Engineer, Research & Development Resume Samples

4.6 (75 votes) for Engineer, Research & Development Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the engineer, research & development job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
HB
H Bartoletti
Haylie
Bartoletti
4432 Feest Burgs
Los Angeles
CA
+1 (555) 751 9911
4432 Feest Burgs
Los Angeles
CA
Phone
p +1 (555) 751 9911
Experience Experience
08/2014 present
San Francisco, CA
Principal Engineer, Research & Development
San Francisco, CA
Principal Engineer, Research & Development
08/2014 present
San Francisco, CA
Principal Engineer, Research & Development
08/2014 present
  • Perform advanced computational modeling using FEA, CFD and FSI techniques
  • Lead investigation of existing intellectual property and writing of new intellectual property
  • Create 3D models and drawing using Creo or SolidWorks
  • Provide R&D engineering support for the commercialization activities to launch novel catheter designs
  • Develop in-vitro test systems and simulations, including the design of equipment and fixtures
  • Prototype and build concepts in partnership with technicians and pilot manufacturing
  • Lead the structural mechanical simulation and engineering design to develop structural heart devices
08/2008 06/2014
Chicago, IL
Senior Engineer, Research & Development
Chicago, IL
Senior Engineer, Research & Development
08/2008 06/2014
Chicago, IL
Senior Engineer, Research & Development
08/2008 06/2014
  • Develop new delivery system test methods, procurement of tooling and equipment, execute engineering tests for feasibility through DV testing
  • Serve as delivery systems technical expert while working closely with R&D team members and internal cross functional teams
  • Work closely with project team members and internal partners to deliver project's technical objectives
  • Create 3D models and drawing using pro-e
  • Perform advanced computational modeling using FEA and CFD analyses
  • Support the designing of first and second generation of the implant and catheter components with ProE or Solidworks
  • Manage various injection molding and catheter external suppliers
01/2005 05/2008
Dallas, TX
Engineer, Research & Development
Dallas, TX
Engineer, Research & Development
01/2005 05/2008
Dallas, TX
Engineer, Research & Development
01/2005 05/2008
  • Design, develop, and qualify test fixtures/tooling, test methods and procedures including writing and executing protocols
  • Develop basic experiments and tests (including writing and executing protocols) to qualify and validate product design
  • Development of automated testing solutions including software and hardware components
  • Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, evaluation and trouble-shooting functions
  • Interface with manufacturing, clinical affairs, quality, sales and marketing, outside consultants and vendors to ensure
  • Support the designing of first and second generation of the implant and catheter components with ProE or Solidworks under the direction of project leader
  • Initiate ECRs (Engineering Change Request) for test methods, fixture drawings and validation documentation
Education Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
Ashford University
Bachelor’s Degree in Engineering
Skills Skills
  • CAD (Solidworks or Pro/E) experience
  • Strong prototyping skills are highly valuable. Knowledge of plastic and metal processes including: extrusion, molding, bonding, adhesives, soldering and machining desirable
  • Proficiency in general Microsoft applications including MS Word and Excel
  • Ability to effectively communicate and collaborate with the team is essential
  • Ability to work well independently and as a member of a team is essential
  • Ability to work well both independently and as a member of a cross-functional team in a dynamic environment with multiple tasks ongoing simultaneously is essential
  • Develop basic experiments and tests (including writing and executing protocols) to qualify and validate product design
  • Strong problem-solving, organizational, analytical and critical thinking skills
  • Participate in the new product development teams to provide DFT reviews on new products in software and electronics to ensure that we design quality and testability into the product
  • Ability to read and understand procedures, drawings, schematics and to carry out assembly instructions
Create a Resume in Minutes

15 Engineer, Research & Development resume templates

1

IT Engineer, Research & Development Resume Examples & Samples

  • Facilitate application of HMRC and DTI guidelines to identify those R&D projects eligible for tax relief
  • Writing technical project reports describing the technological objectives, advancements and uncertainties of client projects, to support the R&D claim
  • Supporting the business in winning new clients by leveraging from industry sector expertise through the preparation and delivery of proposals
  • LI-MANUAL-POST-JOB*
  • Previous R&D tax knowledge or studies/academic achievements is required for this role
  • Engineering degree required
  • In-depth technical expertise in your discipline and understanding the commercial/technical issues faced in this sector
  • Auditing experience
  • Prince 2 Qualification is required
  • Professional Memberships: - Institution of Engineering and Technology (IET)
2

Big-it Engineer, Research & Development Resume Examples & Samples

  • Interviewing clients' senior technical staff in order to develop an understanding of the technical characteristics of the projects undertaken
  • Responsible for high quality delivery of advice and solutions to major FTSE clients, ensuring management of risk and reputation
  • Leading or working as an effective member of a project team, exhibiting strong communication skills and be able to co-operatively work and create synergies with other team members of different skill sets
  • Previous R & D tax knowledge is NOT required for this role although this would be highly advantageous
  • Strong, broad technical industry knowledge and hands-on experience in the IT, software or high-technology sectors
  • Relevant qualifications in the specific area of expertise required for example bachelor's degree in computer science
  • Excellent report writing, communication, interview skills and presenting ability
  • Ideally suited to candidates with a professional services background (Big 4, mid tier or consulting firm) or from industry
  • Excellent business development skills, able to identify and convert opportunities to sell work. Proven success in developing significant client relationships
3

Innovation Engineer, Research & Development Resume Examples & Samples

  • Ideate - You will contribute to developing new visions of future state Starbucks endeavors through your own individual work as well as brainstorming sessions, ranging from impromptu two-person riffs to more formalized multi-disciplinary convocations
  • Create - You will turn ideas into reality. The ability to rapidly prototype and iterate is paramount. Now is the time to put those maker skills to use in creating proof-of-concept models that often require a blending of mechanical, plumbing, electrical and software components. These prototypes are meant to demonstrate the technical feasibility of a concept and/or user experience
  • Evaluate – You will critically, analytically and emotionally assess ideas, prototypes and finished equipment in an effort to bring out the very best in a concept. Then you may loop back to ideating on how to make it even better
  • Communicate – You will need to clearly express your ideas visually, verbally and in writing to a variety of audiences (e.g. technical and non-technical, internal and external partners, peers and management, etc). You will also need to listen to users in order to accurately and effectively turn their needs into guiding principles and specifications
  • BS in an engineering field (mechanical, electrical, computer science, material science, etc)
  • 2+ years of experience in making innovative equipment, machines, robots, software, firmware, apps, etc
  • Ability to work with cross-functional teams
  • Knowledge and application of engineering principles
  • Motivated
  • Tenacious
  • Adaptable to frequently evolving priorities
  • Skilled at the computer programs of your field (e.g. SolidWorks CAD for a mechanical engineer)
  • Basic skills in Microsoft Word, Excel, PowerPoint
  • Experience in the food and beverage or related industry is a plus
4

Engineer Research Development Resume Examples & Samples

  • Designing signal processing algorithms to extract signals from noisy data
  • Probing large quantities of sensor data to uncover, understand, and exploit complex phenomenology
  • Prototyping algorithms in MATLAB, IDL, C, FORTRAN, and/or C++
  • Measuring algorithm performance as applied to a variety of sensor data
  • Collaborating with a software engineering team to facilitate algorithm implementation in real-time code
  • Presenting technical progress at technical review meetings, and documenting results via written reports
  • Bachelor's Degree in Physics, Applied Mathematics, Engineering, or a related technical discipline with a minimum of 5 years related technical experience, 3 years with a Master’s Degree
  • US Citizenship with the ability to obtain a Top Secret Security Clearance required (Active/Current Top Secret Highly Preferred)
  • Demonstrated success developing technical solutions to complex problems which require the regular use of ingenuity and creativity
  • A strong appetite for attacking and solving interesting problems
  • Ph.D. in Physics, Applied Mathematics, Engineering, or a related technical discipline
  • Experience in any of the following areas is highly desired: data analysis, signal processing techniques, and algorithm development, particularly as applied to complex sensor systems
  • Proficiency with scientific prototyping languages such as IDL, MATLAB, Python, and/or Mathematica
  • Familiarity with signal processing algorithm design and implementation in C and/or C++, and real-time parallel processing
5

Engineer Research Development Resume Examples & Samples

  • Develop analyze, verify, test and document algorithms for use by weather models
  • Conduct development and verification of post process algorithms to derive environmental fields of interest from weather modeling output. Design weather modeling verification technique
  • Conduct analysis of impacts for various permutations of sensing strategy on the skill of environmental prediction
  • Make recommendations to improve scientific quality and the efficiency or usability of the data and models
  • Participate in program and customer evaluation of options
  • BS degree in Atmospheric Science or related field and a minimum of 2 years related experience
  • Familiarity with weather modeling
  • Computer Languages: Python
  • Operating System familiarity (Linux, Windows)
  • MS degree in Atmospheric Science or related field
  • Software development (numerical methods, scientific prototyping, etc.) using FORTRAN, C++, or IDL in an Agile environment
  • Familiarity with Atmospheric Data Assimilation Schemes and Numeric Weather Modeling (NWM)
  • Knowledge of Software engineering principles (architecture, design patterns, OO design)
  • Automated testing tools (e.g. Selenium, Cucumber, or TestComplete)
6

Engineer Research Development Resume Examples & Samples

  • Bachelor’s degree and portfolio demonstrating technical/artistic competence in studio arts such as sculpture, industrial design, ceramics
  • Able to work in a team environment with minimal supervision
  • Good communications skills, both written and verbal, and capable of identifying salient characteristics of a problem and integrating them into a successful solution
  • Active TS/SCI with Polygraph
  • Photogrammetric and laser scanning, digital design, and 3-D printing (CAD, Maya, Zbrush or comparable experience a plus)
  • Candidate will have molding experience. Understanding of silicone, urethane, gypsum and epoxy techniques a plus
  • Experience researching, sourcing, and maintaining production material inventory
  • Demonstrated ability to adhere to specific detailed technical requirements
  • Ability to manage time effectively across multiple projects and meet deadlines
  • Capable of following directions accurately and responding well to feedback and critique
  • Willingness to learn and keep current with new software and techniques
7

Engineer, Research & Development Resume Examples & Samples

  • Conceptualize, design and develop complex, implantable devices and interventional catheters, including design requirements, generate design concepts, prototype builds, pre-clinical evaluations, support clinical studies, and transfer to manufacturing
  • Support the designing of first and second generation of the implant and catheter components with ProE or Solidworks under the direction of project leader
  • Support the development of new test methods, procurement of tooling and equipment and executing long term testing for implants under the direction of project leader
  • Work with physician partners in both a pre-clinical and clinical environment to evaluate technology and gain understanding of cardiovascular anatomy and structure heart and valve diseases
  • Work closely with project team members and internal partners to deliver project's technical objectives
  • Strong/exceptional hand skills, metals processing, catheter assembly and experience with lathe and mill and prototyping designs is preferred
  • Must be able to demonstrate creative thinking and unique solutions to solve problems
  • Experience in materials (plastics, adhesives, stainless steel and nitinol), and mechanical (small part) design is desired
  • Experience in catheter design (extrusions, braiding, molding, and bonding processes) is desired
8

Principal Engineer, Research & Development Resume Examples & Samples

  • Understand the clinical disease landscape, imaging, implant and user need. Lead brainstorming sessions, generate ideas and file patents
  • Conceptualize, design and develop complex interventional catheters to pair with new generation implantable devices
  • Define design requirements, generate design concepts, prototype, lead pre-clinical evaluations, support clinical cases, and transfer to manufacturing
  • Work closely with project team members and internal partners to deliver project's technical objectives. Present results and progress to team, management and partnering physicians
  • Manage junior engineers on technical development and expertise
  • Must be able to demonstrate strong skills as an innovator and problem solver
  • Hands-on experience with catheter design and the proven ability to apply technical knowledge and judgment to complex technical problems
  • Solid knowledge of plastics and various manufacturing processes (extrusion, braiding, molding, and bonding)
  • Experience in new product development with successful design from concept to commercialization is strongly preferred
  • Effective communication, listening, and diagnostic skills, verbal and written, are necessary. The demonstration of effective collaboration and influencing skills will be key so that the candidate can achieve results within the cross functional team and with stakeholders around the company
  • Ability to work well independently as well as part of a team
  • The candidate must also be comfortable interacting with leading cardiologists as well as taking an active role in animal studies and investigations
9

Principal Engineer, Research & Development Resume Examples & Samples

  • Conceptualize, design, and develop complex interventional devices
  • Define design requirements, generate design concepts, prototype, iterate, and lead pre-clinical evaluation and testing
  • The ideal candidate requires a Bachelor's degree in engineering; mechanical or biomedical is preferred and a minimum 8 years of experience in the medical device industry OR a master's degree in engineering in combination with 6 years of medical device experience
  • Experience developing interventional class III implantable medical devices (510K/PMA Products) required
  • Experience in implantable device design, including proficiency with metals (SS, Cobalt Chromium, Nitinol) mechanical (small part) design required
  • Experience developing and executing design verification testing for long-term ISO required testing of implantable devices such as device durability/fatigue, accelerated wear, and hydrodynamic testing
  • Experience writing final reports and technical summary documents intended to support clinical and regulatory submissions
  • Experience in new product development with successful design from concept to clinical evaluation is strongly preferred
  • Effective communication, listening, presenting, and diagnostic skills, verbal and written, are necessary. The demonstration of effective collaboration and influencing skills will be key so that the candidate can achieve results within the cross functional team and with stakeholders around the company
  • The candidate must also be comfortable interacting with leading cardiologists and surgeons as well as taking an active role in animal studies and investigations
  • Preferred background includes experience in more than one of the following areas: Interventional access devices, rapid product development, creative design and hands-on prototyping, process development, RD transfers to manufacturing, design for manufacturing, and project management
  • A minimum of five years of creative design expertise using Creo/ProE or SolidWorks is preferred
10

Senior Engineer, Research & Development Resume Examples & Samples

  • Conceptualize, design and develop complex, implantable devices and interventional catheters, including design
  • Requirements, generate design concepts, prototype builds, pre-clinical evaluations, support clinical studies, and transfer to
  • Manufacturing
  • Support the designing of first and second generation of the implant and catheter components with ProE or Solidworks
  • Under the direction of project leader
  • Support the development of new test methods, procurement of tooling and equipment and executing long term testing for
  • Implants under the direction of project leader
  • Work with physician partners in both a pre-clinical and clinical environment to evaluate technology and gain
  • Understanding of cardiovascular anatomy and structure heart and valve diseases
  • Strong/exceptional hand skills, metals processing, catheter assembly and experience with lathe and mill and prototyping
  • Designs is preferred
  • Experience in statistical analysis or Six Sigma Black Belt Certification is desired
  • Effective communication, listening, and diagnostic skills, verbal and written, are necessary
  • Ability to work well independently and as a member of a team is essential
11

Engineer, Research & Development Resume Examples & Samples

  • Generate design concepts, prototype builds, pre-clinical evaluations, and transfer of product to manufacturing
  • Apply Mechanical Engineering knowledge to the design and development of new products - Solve Mechanical
  • Engineering problems at the component through system level
  • Develop test methods and procedures to evaluate device prototype performances
  • Conduct tests utilizing existing test protocols, or develop new ones as needed and generate related written reports
  • Maintain accurate documentation of concepts, designs, drawings, and processes
  • Interface with manufacturing, clinical affairs, quality, sales and marketing, outside consultants and vendors to ensure
  • Compliance with internal and external policies and procedures, QSR and FDA regulations and ISO standards
  • May receive technical guidance on the most unusual or complex problems, but independently determines and develops
  • Approaches to solutions
  • Engineer II requires a bachelor's degree in Engineering and a minimum of 3 years of relevant engineering experience to
  • Include, exposure to specification development, and prototyping
  • Experience in the medical device or other highly regulated industry with emphasis interventional surgical procedures is
  • Clinical experience in an interventional, vascular or cardiac surgery arena a plus
  • Basic understanding of the Human Anatomy is desired
  • Experience in Medical Device Assembly and Inspection desired
  • Proficiency in 3D modeling is desired: Pro Engineer or Solidworks
  • Demonstrated ability to be hands-on desired
12

Principal Engineer, Research & Development Resume Examples & Samples

  • Work with internal techs, engineers and outside vendors to design iterate, trouble shoot and problem solve quickly
  • Provide R&D engineering support for the commercialization activities to launch novel catheter designs
  • Develop and qualify test methods and procedures to be used in device qualification testing
  • Generate test protocols, reports and supporting documentation for design verification purposes
  • Solve design, process and testing problems at the component through system level
  • Document design requirements, designs, drawings and processes in conformance with Edwards design control procedures
13

Engineer Research Development Resume Examples & Samples

  • Designs, models, analyzes and tests sensor systems and products with a focus on inertial gyroscope and accelerometer technologies for position, navigation and timing (PNT) applications
  • Supports the development of existing and emerging sensor products based on the following technologies: Fiber optic gyroscope (FOG), hemispherical resonator gyroscope (HRG), Ring Laser Gyroscopes, MEMS based gyroscopes/accelerometer and nuclear magnetic resonance gyroscopes (NMR)
  • Conducts research and development into the physical phenomena that can be used in new sensor product developments or enhancements to current sensor products
  • Performs detailed analyses, system design, component selection, characterization, optimization and test verification
  • Develops component specifications, tolerances, simulations and tests procedures for systems and components for the sensor subsystem
  • Ph.D. in Optics or Applied Physics
  • In-depth knowledge of fiber optic gyro (FOG) errors and noise sources
  • Experience in gyroscope test methods and procedures
  • Knowledge in MATLAB scripting
  • Must be able to make decisions and solve problems while dealing with incomplete, ambiguous or confusing requirements
  • Capable of working in a highly creative environment developing new, emerging technologies and processes
  • Can work collaboratively in multi-disciplinary teams across a number of technologies and departments
  • Must be capable of presenting complex information in a coherent manor to all levels including Senior Management and External
  • Must be a U.S. citizen and have the ability to qualify for Secret Clearance
  • Capable of developing custom complex models, simulations and numerical analysis for product design and optimization
  • Experience with test equipment data acquisition and interfacing
  • Familiarity with LabView
  • Fiber handling experience
  • Familiarity with fiber optic gyro (FOG) signal processing is highly desirable
14

Principal Engineer, Research & Development Resume Examples & Samples

  • Lead the structural mechanical simulation and engineering design to develop structural heart devices
  • Design and develop minimally invasive transcatheter heart valve repair and replacement technologies
  • Perform advanced computational modeling using FEA, CFD and FSI techniques
  • Create anatomic models for understanding of boundary conditions in device design
  • Create 3D models and drawing using Creo or SolidWorks
  • Excellent verbal and written communication skills, project-management skills, detail orientation and analytical/problem solving skills are a must
  • Demonstrate ability to provide creative design solution to engineering problems
  • Proficient use of 3D CAD package is essential
  • Prefer hands-on experience with Creo and/or SolidWorks
  • Experience with finite element stress analysis using Abaqus is required. Knowledge of starccm+ is desirable
  • Must demonstrate ability to provide creative design solution to engineering problems
  • Must have the ability to manage several projects and to negotiate effectively
15

Engineer Research Development Resume Examples & Samples

  • Computer Languages: Experience with JAVA, IDL and Fortran
  • Familiarity with UKMO Unified Model and NOAA’s GFS and FIM-Chem models
  • DoD Top Secret security clearance eligible
  • Software development (numerical methods, scientific prototyping, etc.) in an Agile environment
16

Engineer, Research & Development Resume Examples & Samples

  • Design and perform laboratory tests on various synthetic and biological materials using analytical and biological approaches
  • Create, test, and/or improve products by developing moderately complex experiments and tests (including writing and executing protocols), analyze results, make recommendations, and develop reports, based on engineering principles
  • Assign R&D support tasks; gives instruction to technicians on conducting tests; train technicians and provide feedback; and coordinate technician work
  • Generate study protocols, test methods, test reports to establish/characterize product
  • Coordinate with outside vendors for test services and/or joint development
  • Collaborate closely with cross-functional team to accomplish project objectives
  • Bachelor's Degree in biological sciences, biomedical engineering or closely related scientific disciplines with minimum of 2 years working experience OR Master's Degree or equivalent in Engineering or Scientific field with internship, senior projects, or thesis in Engineering or Scientific field including either industry or industry/education
  • Previous experience working with lab/industrial equipment required
  • Ability to perform basic laboratory tests, such as UV-Vis, optical microscope, cell culture
  • Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills
  • Good problem-solving, organizational, analytical and critical thinking skills
  • Basic understanding of statistical techniques
  • Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
  • Prior experience of in vivo study is a plus
17

Senior Engineer, Research & Development Resume Examples & Samples

  • Design and develop minimally invasive Transcatheter heart valve repair and replacement products
  • Perform design, testing and development activities in class-III implantable medical devices in accordance with specifications, medical guidance, and regulatory safety standards
  • Develop in-vitro test systems and simulations, including the design of equipment and fixtures
  • Create 3D models and drawing using pro-e
  • Perform advanced computational modeling using FEA and CFD analyses
  • Must be a highly motivated self-starter able to achieve results with minimal direction
  • Must be proactive and creative in solving technical problems
  • Requires a high-energy individual who has excellent teamwork, partnering and negotiation skills
  • Excellent verbal and written communication skills, project-management skills, detail orientation and analytical/problem
  • Solving skills are a must
  • Prefer hands-on experience with Pro-E and/or SolidWorks
  • Experience with finite element stress analysis is required
  • Strong hands-on mechanical and design skills required
  • Must possess effective communication skills and work well in cross-functional team environment
  • Must have the ability to manage several projects and negotiate effectively
18

Senior Engineer, Research & Development Resume Examples & Samples

  • Participate in exploration and identification including interaction with clinicians, clinical literature investigations, and basic market understanding
  • Contribute to ideation and conceptualization of a multitude of design concepts to address key unmet needs, with guidance from senior engineers as needed
  • Translate brainstormed solutions to designed concepts with ProE or Solidworks, with guidance from senior engineers as needed
  • Participate in investigation of existing intellectual property and writing of new intellectual property
  • The ideal candidate should have a Bachelor's degree in engineering; mechanical or biomedical is preferred
  • A minimum of four years of experience in the medical device industry OR a master's degree in engineering or business in combination with two to three years of medical device experience
  • An understanding and ability to use ProE or Solid works is required
  • Strong/exceptional hand skills, metals processing, catheter assembly and experience with prototyping designs is preferred
  • An entrepreneurial spirit and adeptness and interest in business acumen is desired
19

Principal Engineer, Research & Development Resume Examples & Samples

  • Needs exploration and identification including interaction with clinicians, clinical literature investigations, and basic market understanding
  • Lead ideation and conceptualization of a multitude of design concepts to address key unmet needs
  • Translate brainstormed solutions to designed concepts with ProE or Solidworks
  • Prototype and build concepts in partnership with technicians and pilot manufacturing
  • Lead investigation of existing intellectual property and writing of new intellectual property
  • Work with ERC and physician partners in pre-clinical environment to evaluate technology
  • Work closely with project team members and internal partners to deliver BioDesign’s Mission and objectives
  • An entrepreneurial spirit and adeptness and interest in business acumen is required
  • A basic understanding and ability to use ProE or Solid works is required
  • Excellent communication, listening, and diagnostic skills, verbal and written, are necessary
  • Strong hand skills, metals processing, catheter assembly and experience with prototyping designs is preferred
  • Experience in materials (plastics, adhesives, stainless steel and nitinol), and mechanical design is desired
  • Understanding of cardiovascular anatomy and structural heart and valve diseases is desired
20

Engineer Research Development Resume Examples & Samples

  • Bachelor's Degree in Physics, Applied Mathematics, Engineering, or a related technical discipline with a minimum of 5 years related technical experience, 3 years with a Master’s Degree, or PhD and 0 years’ experience
  • US Citizenship with the ability to obtain a Top Secret Security Clearance required
  • Proficiency with scientific prototyping languages such as IDL, MATLAB, Python, and/or Mathematics
  • Active/Current Top Secret Clearance
21

Engineer Research Development Resume Examples & Samples

  • Support science development, evaluation and integration across a wide range of space environmental models
  • Support development and evolution of space environmental sensing strategy
  • Enhance Research to Operations process for new and emerging environmental modeling capabilities
  • Develop and integrate techniques to incorporate environmental advice to non-environmental decision making systems
  • Develop strong relationships with the international science community through active participation in disciplinary conferences and peer reviewed publishing
  • Coordinate science activities on contracted efforts using Agile principles
  • Bachelors degree in a STEM related field and 14 years of work related experience OR Masters degree in a STEM related field and 12 years of experience
  • Experience with space environmental sensing and modeling
  • Experience in translating sensor and model output into environmental impacts to systems and operations
  • Familiarity with atmospheric and land surface sensing and modeling
  • Experience with science programming languages (e.g. FORTRAN, C++, MATLAB, Python)
  • DoD Top Secret clearance with current SSBI
  • PhD in a STEM related field
  • Experience with atmospheric and land surface sensing and modeling
  • Possesses strong work ethic, team player, excellent time management skills and a proven ability to deliver on commitments
  • Possesses strong written and oral communication skills
22

Engineer, Research & Development Resume Examples & Samples

  • Development of automated testing solutions including software and hardware components
  • Develop basic experiments and tests (including writing and executing protocols) to qualify and validate product design
  • Develop in-house custom integrations between various software and hardware components
  • Participate in the new product development teams to provide DFT reviews on new products in software and electronics to ensure that we design quality and testability into the product
  • Problem report investigation
  • Develop documentation materials (e.g., procedures) for support of use of tools and processes developed and used in verification and validation activities
  • Identify opportunities for re-design/design of basic equipment, tools, fixtures, etc. to improve manufacturing processes
  • Other incidental duties assigned by Leadership
  • Bachelor's Degree in an Engineering. A degree in Computer Science or Computer Engineering, is preferred
  • Ability to understand software requirements, software diagrams, software architecture, and software controlled systems
  • Basic documentation, communication (e.g., written and verbal) and interpersonal relationship skills
  • Good understanding and knowledge of principles, theories, and concepts relevant to Engineering
  • Good understanding of processes and equipment used in assigned work
  • Experience in working customer facing roles in a service oriented business
23

Senior Engineer, Research & Development Resume Examples & Samples

  • Conceptualize, design and develop complex interventional catheters, including design requirements, generate design concepts, prototype builds, pre-clinical evaluations, support clinical studies, and transfer to manufacturing
  • Gain in-depth understanding of the transseptal procedure to aid in delivery system design
  • Design new generation of catheter shafts and components with ProE or Solidworks under the direction of project leader
  • Work with physician partners in both a pre-clinical and clinical environment to evaluate technology and gain understanding of cardiovascular anatomy and mitral valve disease
  • Serve as delivery systems technical expert while working closely with R&D team members and internal cross functional teams
  • Provide R&D subject matter expertise for delivery system manufacturing transfers and scale up
  • Manage various injection molding and catheter external suppliers
  • Develop new delivery system test methods, procurement of tooling and equipment, execute engineering tests for feasibility through DV testing
  • Bachelor's Degree + minimum of 4 years OR Master's Degree + minimum of 3 years
  • A basic understanding and ability to use ProE or Solidworks is required
  • Must have experience in design for machining
  • Experience in design for injection molded is desired
  • Basic in materials understanding (polymers, adhesives, stainless steel and nitinol)
  • Experience in statistical analysis or Six Sigma Black Belt Certification desired
24

Senior Engineer Research & Development Resume Examples & Samples

  • A Bachelor Degree in Mechanical, Biomedical, Industrial, or Chemical Engineering is desired with a minimum of 5 years of related engineering experience; or an advanced degree with a minimum of 3 years of related engineering experience; or Ph.D. in relevant discipline and four or more years of related engineering experience
  • New product development experience in medical devices is preferred
  • Has significant level engineering experience, product resolution is required
  • Experienced in product design, process development, device testing or prototyping is required. Must possess a good mastery of theoretical and practical fundamentals and experimental engineering techniques is required
  • The candidate will work independently on assigned project activities in a cross functional team environment is required
  • This position will be located in Miami, FL and requires up to 10% travel domestically with the potential of international travel1267170515
25

Engineer, Research & Development Resume Examples & Samples

  • Support a range of engineering activities for new product development (NPD) and legacy product modification including feasibility evaluations, product design verification, test method validation, and equipment validation (e.g. tensile testers, custom test equipment, etc.)
  • Perform and document complex design verification testing, troubleshooting of components, subassemblies and materials. Maintain proper documentation in lab notebooks and forms
  • Design, develop, and qualify test fixtures/tooling, test methods and procedures including writing and executing protocols
  • Assist NPD R&D engineers with device development including: rapidly prototyping designs, evaluating materials, troubleshooting failures, proposing and evaluating design improvements
  • Develop and qualify test fixturing, test methods and procedures to be used in device qualification testing to support operations and implementation of proposed device modifications
  • Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, evaluation and trouble-shooting functions
  • Participate in the new product development teams, partnering with development engineers to provide ideas and suggestions for improved design concepts, testing concepts, test method development, and qualification activities
  • Identify opportunities for design/re-design of basic test equipment, tools, fixtures, etc. to improve existing test methods and lab processes
  • Develop and execute feasibility studies, equipment qualification, test method validation and/or product verification protocols/ reports and technical reports. May also be responsible for developing test methods and test strategy
  • Create, update and optimize laboratory test methods and standard operating procedures
  • Employ use of statistical analysis techniques and statistical experimental design, as appropriate
  • Perform calibration and preventive maintenance of laboratory test equipment
  • Initiate ECRs (Engineering Change Request) for test methods, fixture drawings and validation documentation
  • Strong written and verbal communication, interpersonal, and relationship building skills
  • Ability to read and understand procedures, drawings, schematics and to carry out assembly instructions
  • Must be able to effectively articulate, verbally and in writing, results and conclusions to technical and non-technical personnel. Must have strong technical writing skills
  • Strong problem-solving, organizational, analytical and critical thinking skills
  • Requires a high-energy individual who has excellent teamwork and partnering skills
  • Ability to work well both independently and as a member of a cross-functional team in a dynamic environment with multiple tasks ongoing simultaneously is essential
  • Capability to quickly learn and interpret complex test systems is required
  • Must be a highly motivated self-starter who is driven to achieve quality and value-add results with appropriate direction. Candidate must seek direction when appropriate
  • Ability to effectively communicate and collaborate with the team is essential
  • Effective organizational and prioritization skills are critical for success in this position
  • Clear understanding of good documentation practices and medical device quality system regulations and requirements
  • Proficiency in general Microsoft applications including MS Word and Excel
  • Experience in medical device development, material testing and evaluation, and/or process development preferred. Previous work experience in a mechanical testing lab environment and with test equipment such as flow, pressure, leak and tensile testers, and other test instrumentation is highly desirable
  • Prior experience in writing and/or performing IQ/OQ test, test method validation, or other tests in an FDA regulated environment is preferred
  • Strong prototyping skills are highly valuable. Knowledge of plastic and metal processes including: extrusion, molding, bonding, adhesives, soldering and machining desirable
  • CAD (Solidworks or Pro/E) experience a plus
26

Senior Engineer Research & Development Resume Examples & Samples

  • Convert theoretical biosensor designs to clear and concise specifications, usable by 3rd party manufacturers
  • Assume the prime wafer design role in R&D
  • Bachelor’s Degree in Science or Engineering with Biochemical or Chemistry focus, or equivalent
  • Ability to design experiments, analyze and interpret data, and document conclusions
  • Analytical skills, creativity and innovative approach to problem solving
  • Ability to determine required analysis to make practical, objective decisions about the best solutions to problems
  • Coordinating and planning skills, leadership and team skills, ability to convert strategy into results
  • Very strong interpersonal, communication and presentation skills; able to deal effectively with people on all organizational levels and work in a team environment across departments
  • Propensity to continuous learning and experimentation
  • Lean Six Sigma Black Belt Certification preferred