Automation & Controls Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the automation & controls job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

M Lind

Mohammad

Lind

798 Lillian Port

New York

+1 (555) 532 2374

798 Lillian Port

New York

Phone

p +1 (555) 532 2374

Experience Experience

San Francisco, CA

Automation Controls Technician

San Francisco, CA

Purdy-Harris

San Francisco, CA

Automation Controls Technician

Provide technical assistance to Production and Maintenance employees to insure equipment is operating at maximum production output levels
Working knowledge of computer systems and personal computers
Provide Maintenance Technicians with concise control systems repair solutions
Perform inspections and preventive maintenance of process control instrumentation
Work with outside vendors to solve and correct application issues with automation control system
Complete individual assignments relating to optimizing/improvements of existing equipment
Performs related duties as assigned

New York, NY

Automation & Controls Engineering Tech-atlanta Syrup Plant

New York, NY

Rippin-Miller

New York, NY

Automation & Controls Engineering Tech-atlanta Syrup Plant

Reports to the Senior Automation Engineer and works as part of the Automation Team
Meets weekly with the Automation Team and helps prioritize and assign automation and control tasks from the Automation Team work list
Performs work on system maintenance and process improvement projects while being ready to respond to problems on the production lines
Supports the entire Atlanta Syrup Plant. This includes the Syrup lines, the new Freestyle lines, and the Automated Warehouse with its 120 foot high ASRS
Understand the impact of control systems on quality. Always perform work so as to safeguard product quality
Perform work in accordance with Plant and Automation Team change management systems
Maintain backups of all automation programs and device configurations. Maintain engineering drawing system

present

Houston, TX

Automation & Controls Specialist

Houston, TX

Oberbrunner Group

present

Houston, TX

Automation & Controls Specialist

present

Work with Teammates to Solve Issues & Develop Process Improvements
Assists with new equipment implementations and projects
Work Closely with Electricians & Millwrights to Solve Issues, Troubleshooting, & Project Implementation
Project Management
Work Safe
Performs troubleshooting of electrical and instrumentation issues for the packaging equipment and machines, Automated Coffee Roasting System, transfer systems and custom software applications
Assists Engineering with updates, changes and testing of new modifications

Education Education

Bachelor’s Degree in Electronics

Seton Hall University

Bachelor’s Degree in Electronics

Skills Skills

Proficient programming ControlLogix PLCs and PanelView Plus HMIs
Ability to communicate and comprehend specifics regarding equipment problems
Proficient with Allen Bradley PLCs, VFDs, HMIs, and Networks (DeviceNet, ControlNet, Remote IO, Data Highway Plus, and Ethernet)
Ability to install, configure and calibrate digital sensors (limit switches, photo eyes, prox switches, etc.)
Ability to install, configure and calibrate analog sensors (flow, pressure, temp, distance, laser, sonic, radar, etc.)
Ability to install, configure and calibrate special/safety sensors (light curtains, area scanners, bar code readers)
Able to configure Windows 2000 / XP/7 drivers for specialized cards and various industrial software applications
Computer skills with knowledge of Microsoft Word, Excel; Outlook
Ability to review engineering drawings and P&IDs for both bid review and troubleshooting
Communicate clearly and concisely, both orally and in writing

Create a Resume in Minutes

15 Automation & Controls resume templates

Read our complete resume writing guides

Fulfillment Automation Controls Manager Resume Examples & Samples

5+ years' experience in PLC Programming - Allen Bradley, Siemens, Modicon
5+ years' experience in HMI/Scada Programming
3+ years' experience in Building Security Access Systems and Automated Building Management Software
Proficient use of Security / Building Access Systems
Associate's degree; Bachelor's degree preferred

Automation & Controls FP&A Analyst Resume Examples & Samples

Bachelor’s Degree in Finance, Accounting, or other business - related discipline
Minimum of 2 years of finance or accounting related work experience
FMP / PFLP graduate (GE Employees ONLY)
Strong written & verbal communication skills with the ability to influence cross-functionally
Demonstrated ability to analyze data, summarize key issues, & propose solutions
Ability to multi-task and appropriately prioritize tasks to meet deadlines
Excellent verbal / written communication skills to clearly and concisely report results
Highly motivated self-starter focused on driving continuous process improvements

Building Automation & Controls Technician Resume Examples & Samples

Perform and supervise the installation methods, startup, checkout and commissioning primarily on temperature controls, DDC and energy metering in a commercial, educational, construction and or retrofit environment
Oversee and coordinate the technical aspects of a project including control drawings, sequences, system architecture, system commissioning and customer training
Have an understanding of electrical circuitry, construction environments and safe work practices
Ability to read and interpret architectural, electrical, mechanical and control drawings
Responsible for ownership of coordination with subcontractors/vendors as applicable and with customers to obtain completion sign-off
Plan, schedule and communicate job details with project manager
Keep all project documentation and paperwork up to date
Able to manage multiple priorities and deadlines
Work with and without direct supervision
Demonstrate the 12 Honeywell behaviors; especially Growth & Customer Focus, Getting Results, Effective Communication, and Technical or Functional Excellence
Able to work flexible hours to accommodate project and client requirements
Technical Certification or Associate Degree in Mechanical, Electrical or Control systems or a HS diploma/GED with a minimum of 2 years of working experience with mechanical, DDC and HVAC control systems
1 year experience Windows networking experience
3 years experience of HVAC controls, interpreting plans and specifications
Minimum 2 years experience with software/sequence programming
Demonstrated ability to use hand tools and test equipment
Working knowledge of personal computers, computer based tools and network systems
Experience with IP, networking and wireless technologies
Experience with systems that involve advanced solutions such as EBI, Tridium, Alerton, Echelon, BACnet and other open technologies
Ability and willingness to travel both locally to project sites with overnight up to 25% as work load demands

Building Automation Controls Estimator Resume Examples & Samples

3 years of experience in HVAC Control systems and/or fire/security systems engineering
2 years of experience estimating HVAC Control systems
2 years of experience with Microsoft Excel, Word and PowerPoint
5 years of experience estimating, selling, project implementation or an equivalent combination of experience and education
The ability to understand application programming for HVAC control systems or fire / security systems
Security Systems Design and Application Experience
Working knowledge of IT systems and Knowledge of fire and security products
Able to read blueprints and drawings and do take-offs

Automation / Controls Maintenance Technician Resume Examples & Samples

Perform equipment maintenance and repair
Responsible for daily, monthly, and quarterly preventive maintenance of equipment to maintain uptime
1 position being filled in Las Vegas and 1 being filled in Jeffersonville
Training (vocational tech) in mechanical or electronic systems preferred
Experience using Microsoft Office (Word and Excel) preferred

Automation / Controls Maintenance Technician Resume Examples & Samples

4+ years experience in the repair and maintenance of an automated manufacturing or distribution line to include an understanding of mechanical equipment (motors, gears, belts, couplings), robotics, pneumatics systems (air compressors, actuators), PLCs, automation and electronic controls
Ability to work some nights and weekends required as needed
Training (vocational tech) in mechanical or electronic systems
Experience using Microsoft Office (Word and Excel)

Automation & Controls Specialist Resume Examples & Samples

Participates in World Class Manufacturing team sessions
Performs troubleshooting of electrical and instrumentation issues for the packaging equipment and machines, Automated Coffee Roasting System, transfer systems and custom software applications
General industrial maintenance and electrical systems (3 years)
Ability to work in accordance with quality, safety, and sanitation standards, policies and guidelines

Automation / Controls Maintenance Technician Resume Examples & Samples

Provide quality reporting, analysis and audits, and support continuous quality improvements
Will start and stop Automated Pharmacy System (APS) equipment
Monitor and respond to APS alarms
Monitor and replenish vial labelers, cappers and sealers
Perform recurring preventive maintenance, mechanical and minor electrical repair
5+ years experience working with mechanical systems such as: couplings, gears, bearings, clutch, belt and chain drives, mechanical alignment, read and understand trade data, etc
5+ years experience working on pneumatic & hydraulic systems such as: air compressor, air dryer, directional control valves, air cylinders, actuators, speed flow controllers, tube sizing, etc
3+ years experience working on electrical systems such as: electrical safety, electrical fundamentals, electrical conductors, raceways, wiring devices, protective devices, distribution, motors, transformers, grounding, lighting, measurement instruments, symbols and drawings
3+ years experience with Preventive Maintenance Systems on automation line equipment such as conveyors, motors, printers, labelers, etc
5+ years experience working on Automation systems such as: PLC theory of operations, PLC internals, Input & Output (sensors, relays, etc.), ladder logic, PLC program instructions, Robotics operation and maintenance, etc
3+ years experience of PC systems and applications
Must be willing to work 2nd shift when needed
Training in mechanical or electronic systems such as: Automated Pharmacy System, ThinkDo automation, Programmable Logic Controllers, Robotics, conveying system
Knowledge and experience in pharmacy High Volume System (HVS) is a plus

Automation / Controls Maintenance Technician Resume Examples & Samples

3+ years experience working with mechanical systems such as: couplings, gears, bearings, clutch, belt and chain drives, mechanical alignment, read and understand trade data, etc
3+ years experience working on pneumatic & hydraulic systems such as: air compressor, air dryer, directional control valves, air cylinders, actuators, speed flow controllers, tube sizing, etc
2+ years experience working on Automation systems such as: PLC theory of operations, PLC internals, Input & Output (sensors, relays, etc.), ladder logic, PLC program instructions, Robotics operation and maintenance, etc
2+ years experience of PC systems and applications

Automation / Controls Maintenance Technician Resume Examples & Samples

5+ years of experience working with mechanical systems such as: couplings, gears, bearings, clutch, belt and chain drives, mechanical alignment, read and understand trade data, etc
5+ years of experience working on pneumatic & hydraulic systems such as: air compressor, air dryer, directional control valves, air cylinders, actuators, speed flow controllers, tube sizing, etc
5+ years of experience with Preventive Maintenance Systems on automation line equipment such as conveyors, motors, printers, labelers, etc
3+ years of experience working on electrical systems such as: electrical safety, electrical fundamentals, electrical conductors, raceways, wiring devices, protective devices, distribution, motors, transformers, grounding, lighting, measurement instruments, symbols and drawings
3+ years of experience working on Automation systems such as: PLC theory of operations, PLC internals, Input & Output (sensors, relays, etc.), ladder logic, PLC program instructions, Robotics operation and maintenance, etc
3+ years of working knowledge of PC systems and applications
Ability to work after hours and weekends as needed
Knowledge and experience in Automated Pharmacy System

Automation / Controls Maintenance Technician Resume Examples & Samples

Some knowledge and experience working with mechanical systems such as: couplings, gears, bearings, clutch, belt and chain drives, mechanical alignment, read and understand trade data, etc
Some knowledge and experience working on pneumatic & hydraulic systems such as: air compressor, air dryer, directional control valves, air cylinders, actuators, speed flow controllers, tube sizing, etc
Some knowledge and experience working on electrical systems such as: electrical safety, electrical fundamentals, electrical conductors, raceways, wiring devices, protective devices, distribution, motors, transformers, grounding, lighting, measurement instruments, symbols and drawings
Some knowledge and experience with Preventive Maintenance Systems on automation line equipment such as conveyors, motors, printers, labelers, etc
Some knowledge and experience working on Automation systems such as: PLC theory of operations, PLC internals, Input & Output (sensors, relays, etc.), ladder logic, PLC program instructions, Robotics operation and maintenance, etc
Some knowledge and experience of PC systems and applications
Must be able to work after hours and weekends as needed
Knowledge and experience in Automated Pharmacy System is a plus

Automation & Controls Engineering Tech-atlanta Syrup Plant Resume Examples & Samples

Reports to the Senior Automation Engineer and works as part of the Automation Team
Meets weekly with the Automation Team and helps prioritize and assign automation and control tasks from the Automation Team work list
Performs work on system maintenance and process improvement projects while being ready to respond to problems on the production lines
Supports new equipment design and installation. Although this is not a travel position, infrequent domestic and international travel is sometimes required for Factory Acceptance Testing and to attend training
This is a busy, hands-on job that requires experience with industrial control systems and a self-starter, self-directed work ethic to accomplish tasks. The Atlanta Syrup Plant is one of the most automated plants in Coca-Cola. As a result, the Automation & Controls Engineering Technician must work with traditional industrial control systems (electrical, wiring, instrumentation, robots, PLCs, etc.) AND traditional “IT” systems (computers, servers, Ethernet networking, Wi-Fi, databases, Linux systems, web development, etc.)
Supports the entire Atlanta Syrup Plant. This includes the Syrup lines, the new Freestyle lines, and the Automated Warehouse with its 120 foot high ASRS
Understand the impact of control systems on safety. Always work in accordance with plant safety requirements
Inspect safety control systems (drive safe off systems, door interlock switches, light curtains, area scanners, safety PLCs, LOTO wiring, etc.) and make recommendations for repair or improvement. Be capable of implementing repair or improvement
Understand the impact of control systems on quality. Always perform work so as to safeguard product quality
Perform work in accordance with Plant and Automation Team change management systems
Maintain backups of all automation programs and device configurations. Maintain engineering drawing system
Configure, troubleshoot and maintain vision systems and barcode readers
Configure, troubleshoot and maintain automated labelers
Maintain plant quality databases used for scheduling, batching, and expiration dates
Maintain labeling and identification for automation systems
Understand the impact of control systems on production. Always perform work while communicating with production teams and avoid unplanned production down time
Troubleshoot electrical systems to maintain plant production (motor circuits, VFDs, Servo Systems, sensors, instrumentation, and associated wiring and configuration)
Configure, program, and troubleshoot PLC systems. 90% is Allen Bradley ControlLogix, some PLC5 and SLC500. Some Siemens S7. Some B&R Automation
Configure, program, and troubleshoot HMI systems. 90% PanelView Plus
Configure, program, and troubleshoot SCADA systems. GE iFix, FTView SE, Historian systems
Configure, program, and troubleshoot robot cells
Diagnose problems with machinery, control devices, servers, computers, network switches, routers, and other automation equipment · Maintain plant industrial networks, data collection systems and reporting servers. Maintain a vSphere virtual server environment with 30+ virtual servers
Develop OE data systems with products like GE Plant Apps and Rockwell Plant Metrics. Develop data dashboards and visual factory displays with products like GE RTIP, Rockwell VantagePoint, and simple HTML web pages
Maintain and troubleshoot automation control systems with PLC Ethernet messaging to databases with HTML/Javascript web page user interfaces
Setup, load, connect and configure desktop PCs, fat clients and thin clients
Be available to answer phone calls outside of normal work hours and provide remote assistance to plant operations when sometimes needed
Actively participate as a self-directed and committed member of a team and work with other team members to achieve the department and plant goals and objectives
Understand how to select controls and electrical components, specify correct ordering information, and help procure components
Ability to manage automation projects as assigned by the Senior Automation Engineer
Ability to work with and manage external contractors to accomplish goals
Identify improvement areas, make recommendations and implement approved changes
Perform calibration checks on critical control equipment. Calibrate as required and maintain required documentation
Assist Maintenance and Operations with writing SOPs and PMs for automation and safety related items
Set up and implement preventive maintenance procedures for automation systems
Maintain effectiveness when experiencing major changes in work tasks or the work environment. Adjust effectively to work within new work structures, processes or requirements. Have flexibility to work different shifts or weekends occasionally, if needed
Carry out responsibilities in accordance with the organization's policies, procedures, and state, federal and local laws
Work closely with Maintenance Technicians and Production Technicians. Provide guidance and training in areas of automation and controls including associated hazards
Able to travel to attend training sessions and conduct FATs when required
Provide technical expertise on project teams
3 to 5 years of experience with industrial control systems
Proficient programming ControlLogix PLCs and PanelView Plus HMIs
Understanding of industrial control panel electrical practices and requirements (Arc Flash, electrical safety, power distribution, etc.)
Ability to install, configure and calibrate digital sensors (limit switches, photo eyes, prox switches, etc.)
Ability to install, configure and calibrate analog sensors (flow, pressure, temp, distance, laser, sonic, radar, etc.)
Ability to install, configure and calibrate special/safety sensors (light curtains, area scanners, bar code readers)
Able to configure Windows 2000 / XP/7 drivers for specialized cards and various industrial software applications
Ability to review engineering drawings and P&IDs for both bid review and troubleshooting
Computer skills with knowledge of Microsoft Word, Excel; Outlook
Ability to communicate and comprehend specifics regarding equipment problems

Building Automation Controls Service Engineer Resume Examples & Samples

Understanding of: electrical diagrams, control diagrams, building operations, and control circuits
Ability to independently triage and troubleshoot service and construction issues
Development of control panel BOM’s
Development of drawings for control panels, power distribution, junction boxes. Included in the drawings are the general arrangement, internal layout, schematics and interconnection and wire diagrams
Preparation of cable, routing plans and schedules
Performing inspects, testing, and commission of the facility systems
Work individually and as part of a team to develop new products, support existing products, test and evaluate equipment
Coordinate project work internally within the department and externally with other departments to ensure on-time completion of projects within budget
Participate in on call rotation
Previous experience working in Secure data centers
Experience working with the following BMS / EPMS Systems
Schneider Electric: PowerLogic
Eaton Electric: Foreseer
Distech Controls – EC-Net
Tridium Controls – Niagara AX
Siemens: Insight
Fundamental Understanding of Systems (Windows/Linux) and Networking (Cisco/Juniper) Hardware and Software
Strong theoretical background in Control Theory and the designing of controls systems
Project management, organization and problem solving skills with a drive for results and the ability to handle multiple task
Must possess ability to build peer relationships as well as work independently
Must be able to operate with minimal supervision

Automation & Controls Technician Level Resume Examples & Samples

Designs Programs for Programmable Logic Controllers (PLC) according to process specifications for production equipment
Conceptualizes, creates and documents all electrical circuit wiring and PLC computer programs that have been designed for the equipment. Uses CAD software and PLC programs for documentation according to the current HD standard
Wires all PLC’s into production equipment. Labels all circuit wiring and documents all PLC programs that have been designed for the equipment along with electrical circuit drawings
Tests and monitors equipment performance and compliance with engineering specifications for the equipment. Debugs operational problems through discussions with cross-functional groups
Provides PLC technical assistance by writing programs for newly designed production equipment
Insures continuous compliance to OSHA guidelines and National Electrical Code (NEC) by inspecting pre-existing PLC’s that are being used on production equipment. Makes sure that all systems are brought into code compliance
Regular attendance at plant meetings and department meetings to ensure communication lines are open between assigned business unit and maintenance department members
Researches and evaluates advanced automation and controls technology to solve technical process problems
When required attends workshops, seminars or supplier classes to gain technical training

Automation & Controls Specialist / Engineer Resume Examples & Samples

Assist with design and detail using Pro-E (Creo) software
Assist with the development of panel layouts, wiring, component specifications, and interfacing HMI systems
Provide input to process improvements in production problem solving
Develop hardware and equipment solutions in a lean manufacturing and J.I.T. environment
Provide training for operators, supervisors, managers and maintenance personnel in the areas of machine operation, troubleshooting, and safety
Support project management activities related to vendor involvement and in-house manufacturing
Support the electromechanical laborers to keep the project timelines on time, according to deadlines and due dates
Support all project activities from initial order, through first production run including post- launch to troubleshoot any startup items
Support APQP efforts, including validation, qualification, and PPAP work
Create and generate documentation for projects, including but not limited to drawings, schematics, and layouts
Prepares technical fit specifications and works with designers and factories to ensure that the specifications, measurements, fit, and construction are in keeping with the product brief. Responsible for leading or supporting related design reviews
Develop and execute plans for upgrades to process equipment in support of customer and PFMEA initiatives
Develop process flow charts to document process and PLC logic flows
Provide support of Fortive Business System (FBS), Policy Deployment (PD), and operations objectives
Support weekly update meetings to review status of project and converse on issues
Engineering Degree preferred or equivalent work experience and certifications
Understanding of related manufacturing processes and equipment
Ability to read wiring schematics, read manufacturing blueprints, and understand relay ladder logic
Applicable Electrical experience preferred for this role
Knowledgeable of mechanical principles, machining practices, the properties of metals, and the application of mathematics and dimensions to production machinery and tooling
Knowledgeable of modern fabrication/assembly and machine-shop practices techniques
Working knowledge of machine components (past, present, and future)
Understanding of Lean manufacturing principles including SMED and standard work
Understanding and Maintenance of Quality (JVS, customer, and industry) standards
Must be strong in GD&T, drafting, detailing, and related CAD skills
Ability to chart the course by dealing with concepts and complexity comfortably
Experience supporting automated and robotic systems in production. (troubleshooting)
Must be adaptable to change in order to analyze both successes and failures for clue to improvement
Safety (applicable electrical codes, OSHA, etc.)
B.S. Engineering Degree preferred or equivalent work experience and/or certifications

Building Automation Controls Tech Resume Examples & Samples

Provides sketches of field changes and discrepancies for engineering corrections and drawings
Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs. Promotes the sale of add-on work
Manages assigned work to meet professional execution, of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner
Adheres to all Johnson Controls and customer safety standards. Provides safety awareness on work sites
May provide training to customers on electronic control systems operations. Delivers manuals and documentation to the customer for training needs as required. Mentors and trains mechanical workforce on building automation systems. Provides support to the mechanical staff on non-complex, non-critical equipment
Compiles job documentation, such as certificate of completion, customer training forms, training certificates and punch lists
Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company

Automation & Controls Specialist Resume Examples & Samples

Work Safe
Excellent Organizational Skills
Ability to Generate New Ideas and Recognize the Need for New and/or Modified Approaches
Effective Written and Verbal Communication
Programmable Logic Control (PLC) Programming
Human Machine Interface (HMI) Programming
Electrical Control Circuit Troubleshooting
Electric Arc Furnace Regulation
Electrical Schematic Interpretation
Electrical Control Circuit Design
Control Panel Design and Installation
Database/Server Programming
AC & DC Drive Configuration
AC & DC Motor Theory Application
Instrumentation Configuration and Calibrations
Ethernet Network Setup and Troubleshooting
Power Distribution System Design/Theory
Thorough Understanding of Production Process
Work Closely with Electricians & Millwrights to Solve Issues, Troubleshooting, & Project Implementation
Work with Teammates to Solve Issues & Develop Process Improvements

Principle Automation & Controls Project Engineer Resume Examples & Samples

The duties will be managing technical teams in the execution of major projects. The primary work is Experion PKS implementation on grass roots units and plant modernizations on various Hydrocarbon Processing, Refining, Oil & Gas and Chemical Projects
Works with Sales and Marketing to ensure that project scopes, budgets and execution plans are in place prior to commencement
Directs teams of technical professional in the execution of projects
Interfaces with the customer(s) in order to ensure that projects are executed within budget and schedule. Establishes professional relationships with customers to ensure that project requirements are fully defined and agreed upon
Manages all phases of projects from inception to closeout
Proactively manage change
Tracks and reports progress and financial data to management (cost and revenue)
Works with peers to streamline work processes within the organization
Proactively identifies potential quality and efficiency improvements based on "lessons learned"
Ensures that engineered solutions meet project requirements in terms of functionality, standards, quality, and supporting documentation
Directs implementation process at minimum cost by allocating work assignments to the project team (locally and remote)
Bachelor degree in Engineering or High School Diploma and 10 years engineering experience in lieu of degree
8 years project experience in control or automation projects as a Project Engineer
5 years’ experience in management of professional technical teams on industrial projects as a Lead
Experience with PLC/DCS projects
Experience in industrial automation control design
Experience in industrial automation control implementation
Have a thorough understanding of Process Controls
Experience in technically managing projects with construction/field support content
Experience in technically managing multiple small projects
Experience in managing technical teams
Ability to respond to and manage customers' expectations
Ability to manage change
Experience with all aspects of project controls (budget and schedule development, monitoring and control)
Experience with working with and managing internal and external customers and suppliers

Automation & Controls Services Engineer Resume Examples & Samples

Install and commission Control Solutions hardware and software in a wide variety of machine types encountered in the Oil & Gas, Power Generation, Fertilizers, and other process industries
Troubleshoot existing Control Solutions hardware and software installations on-site
Prepare field services jobs and interventions with the project managers
Attend pre-outages meetings with customers
Provide technical assistance to customers on site as needed
Provide training to customer employees as needed
Supervise mechanical and electrical sub-contractors, and instrumentation de-installation / reinstallation, as well cable laying, meggering and connection
Lead and execute loop check and commissioning phase performing the functional tests
Lead and execute unit start-up and performance tests ensuring proper and safe operation of the machine by evaluating the running parameters and troubleshoot control system problem as they arise
Understand T&C (Terms and Conditions) commitments
College Degree in Electrical / Electronic/ Mechanic/IT Engineering, or Technical High School
Profound work experience in Oil & Gas and Power Plant industry field activities
Excellent written and oral communication skills, to convey technical concepts to business and technical personnel
Electrical and mechanical troubleshooting skills, "hands-on approach"
Strong knowledge in rotating equipment control philosophy (Gas Turbine, Steam Turbine, Centrifugal Compressor, Reciprocate Compressor) and their auxiliaries
Strong knowledge in unit control panel (UCP), motor control center (MCC), direct current panel (DCP), distributed control system (DCS) and fire-fighting system installation and commissioning
Strong knowledge in field devices, instruments and actuators (servo-valves, thermoelements, transmitters etc.)
Knowledge of Switches configuration, Virtual Machine Navigation, Domain Controllers
Ability to handle special tools like pressure pump, multimeter, frequency generator, oscilloscope, and field generator
Ability to understand and implement technical drawings (wiring diagram, P&ID, General Arrangement, etc.)
Willing to travel, in-country and worldwide, and to work overtime
Knowledge of machinery protection and management systems
Valid driver's license and passport (or able to obtain a passport)
Strong computer skills using MS Office software
Experience with either MKIV, MKV or MKVI Control Panel
Familiarity with computer network systems & Switches
Green Belt Certified (GE Employees only)
Customer-focused mindset with proven ability to respond quickly to customer needs
Self-motivated

Automation & Controls Engineering Tech rd Shift Resume Examples & Samples

Must be able to work in the US without sponsorship
Proficient with Allen Bradley PLCs, VFDs, HMIs, and Networks (DeviceNet, ControlNet, Remote IO, Data Highway Plus, and Ethernet)
Reading and interpreting blueprints and schematics
Establish and maintain cooperative working relationships with individuals contacted in the course of work including outside vendors, contractors and suppliers
Siemens S7 programming

Automation Controls Technician Resume Examples & Samples

Program, service, repair, and maintain instrumentation, electrical and process controls related equipment on 4 production lines
Follows departmental troubleshooting and escalation guidelines to avoid extended periods of down time
Troubleshoots circuits through various control systems such as Panel View 600 & 1000, FactoryTalk View & Batch, Allen-Bradley Micrologix 1000, 1200, SLC-505, PLC-5, Compactlogix, and Control Logix
Reads technical and maintenance manuals as required to address equipment and instrument failures
Using P&IDs, Single Line Diagrams, Electrical Schematics, and other drawings and technical information, perform troubleshooting of instrumentation circuits and equipment
Perform inspections and preventive maintenance of process control instrumentation
Disassembles and repair electronic/instrumentation equipment
Performs test and calibrations of process control instruments
Operates electronic test equipment, as well as laptop computers for use as troubleshooting tools for Online troubleshooting of PLCs and SCADA systems as well as other related equipment which can be accessed from a laptop computer
Aligns and calibrate instrument control loops
Installs instrumentation including but not limited to, Circular Chart Recorders, controllers, Flow-Meters, level controls, displays, PLCs, and Ink Jet Coding equipment
Communicates with planners when appropriate, orders, returns parts and materials through SAP
Maintains logs and records though CMMS
Overall goal is to optimize machine operation time by minimizing downtime due to system deficiencies
Use knowledge of electronics, pneumatics, hydraulics, electro-mechanics, PLC based controls, and motor-drive control systems to quickly solve production breakdowns

Automation & Controls Project Engineer Resume Examples & Samples

Perform Experion Servers set-up, software configuration and process control consoles under MS Windows operating systems and system integrations involving DCS (distributed control systems) equipment with 3rd party vendors
Provide control improvement and create/modify control strategies and implement new control routines (gas compression, oil separation and oil platform processes, and water recovery and utilities)
Perform hardware and software integration and configure system instrument databases, control system custom HMI graphics and reports utilizing C200/C300, Experion PKS, Allen Bradley/Rockwell PLC-5 and ControlLogix, process control networks including ControlNet, DeviceNet, Universal Control Network, Ethernet, Local Control Networks, wireless networks, and relational databases
Produces part(s) of total functional design specifications under supervision
Produces technical design specifications
Coaches and supports assigned engineer(s) to ensure they are able to meet the requirements of their work assignments
Reports progress and technical problems to project and engineering supervisor
Ability to meet the safety/security certification requirements to work in offshore facilities
MUST BE WILLING TO TRAVEL UP TO 25 %, Travel to field offices or off-shore oil facility or rig as required
Bachelor’s Degree, engineering preferred
5+ years of project experience as Project Engineer working on DCS and PLC systems/ subsystems at advanced level
3+ years customer interfacing experiences
Any past experience related to process control Automation for Subsea and Topside at Offshore platform is preferable

Automation & Controls Resume Examples & Samples

Bachelor's Degree from an accredited university or college in Engineering, Business or Marketing
Minimum of 5 years of experience in Sales Origination
Demonstrated ability to analyze and resolve problems
Established project management skills
Proven track record of account management and sales success
Understand the various financial instruments used by customers to conduct business
Strong negotiation and sales leadership skills
Prior experience selling contracts / products with technical content of substantial value
Ability to accept constructive criticism and deal calmly and effectively with high stress situations including continuing to persevere and remaining calm in challenging or frustrating circumstances
Ability to work with a matrix organization in which you will take direction and lead others within various functions
Able to develop and maintain customer relationships at all levels, including the CEO staff level
Customer-centric mindset, able to translate customer issues/needs into profitable business solutions
Able to effectively interface with all levels of internal and external customers

Automation Controls Specialist Resume Examples & Samples

Associates degree, or comparable experience in a maintenance environment
2-4 years of experience at various levels in multiple disciplines
Comprehensive working knowledge of all aspects of the plant equipment maintenance operation, including equipment troubleshooting, electrical, refrigeration, machine shop operation, welding, brazing soldering
Experience in either electrical or mechanical repairs, and conducting basic equipment repairs for building and process equipment
High degree of knowledge of instrumentation, controls, low- / medium- / high-voltage switchgear, transformers, programmable logic controllers, protective relays and motor control centers

Automation Controls Technician Resume Examples & Samples

Ensures effective preventative maintenance plans and schedules for all facility equipment and systems
Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately
Oversees any maintenance modifications and/or system upgrades of Materials Handling Equipment and Automated Picking System controls
Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications
Manages the inventory of spare parts
Requires some technical vocational training or equivalent combination of experience and education. Normally requires a minimum of two (2) years related and progressively responsible experience; strong electrical background preferred
Excellent technical and operational knowledge of mechanical electrical and electronic equipment and systems
Knowledge of programmable logic controllers (PLCs) preferred
Ability to read and interpret CAD layouts illustrated parts breakdown (IPB) diagrams and electrical circuitry diagrams and drawings
Strong aptitude for repair and maintenance activities
Working knowledge of computer systems and personal computers
Excellent problem solving skills; ability to resolve issues effectively and efficiently

Automation & Controls Resume Examples & Samples

Bachelor's Degree from an accredited university or college
Minimum of 7 years of experience in Sales and Proposal
Master's Degree Business Administration / Graduate Degree, completed or underway, from an accredited business school
Prior experience with pricing models for technology product in B2B and/or B2C industries
Prior experience with fully-deployed pricing software (e.g. Vistaar, Zilliant, Vendavo, PROS,…)
Prior experience applying advanced statistical methodologies (e.g. regression) to pricing decision making
Ability to manage multiple complex transactions and priorities simultaneously
Customer-focused mindset with proven ability to respond quickly to customer
Excellent executive presence, interpersonal skills and demonstrated team leadership
Strong writing, organizational, communication and presentation skills
Self-starter with high level of energy
Ability to review / understand pricing obligations in customer contracts

Senior Automation & Controls Project Engineer Resume Examples & Samples

Coaches/mentors less experienced engineers and actively shares knowledge within the engineering discipline team
Supports the implementation of projects in line with business objectives including continuous improvement of margin, customer satisfaction, schedule, working capital and safety performance
Produces part(s) of functional design specifications under supervision
Produces (parts of) detailed design specifications
Coaches and supports assigned engineer(s) to ensure they are able to meet the requirements of their work
Monitors and controls assigned work scope against the project plan
Effectively communicates with customers to fully define and agree on project requirements
Proactively recommends potential quality and efficiency improvements within the engineering group
Shares technical knowledge with project team, supervisor, own discipline and other engineering disciplines
Reports progress and technical problems and/or changes to project lead engineer or principal engineer
Must be willing to travel 25 %
Minimum of 6 years’ experience in industrial automation control design and/or Implementation
Bachelors’ degree in engineering preferred
10+ years relevant project experience preferred
Lead for increasingly complex scopes or Discipline Lead (Subject Matter Expert)
Configuration and development of process control strategies utilizing control narrative, cause & effects and Piping and Instrument Diagrams (P&ID's)
Experience with computer set-up and software configuration for process control consoles under MS Windows operating systems and system integrations involving DCS (distributed control systems) equipment with 3rd party vendors
3rd party system interface with PLCs and other DCS systems using Industrial Network and automation protocol: RS-232 or RS-485 on Modbus or DF1 Protocol, Modbus TCP/IP, Ethernet IP, Profibus, OPC

Automation & Controls Systems Task Leader Resume Examples & Samples

10 to 15 years’ of “hands-on” engineering experience in Automation & Control Systems
Experience serving as a project task manager on Automation & Control Systems projects
Experience in development of plans and specifications for Control System design and programming, and construction/start-up support
Experience with client interaction
Professional Engineer License (PE)
Proficiency with Microsoft Word, Excel, PowerPoint, and Outlook
Fluent in spoken and written English

Building Automation & Controls Resume Examples & Samples

Installs, maintains and repairs HVAC controls, including pneumatic, electric and electronic controls
Troubleshoots and repairs HVAC control problems, including dampers, coils, HVAC steam related controls, small air handling equipment and all types of valves
Adjusts and calibrates pneumatic/electronic devices
Inspects and services controls on a scheduled basis
Responds to service calls and troubleshoots problems
Prepares estimates for the repair and/or installation of new HVAC systems and makes recommendations for such repairs and services
Troubleshoots and tests controls using digital multi-meters, anemometers, infrared thermometers, gauges, and digital/analog manometers
Proficient in at least one HVAC control protocol (e.g. Lon, BacNet, N2)
Proficient in at least one brand of digital controls (e.g. Distech, Allerton, Honeywell)
Proficient in either procedural or graphical programming of HVAC controls
Proficient with use of Apps on Mobile Devices
Proficient with Lonworks protocol
Proficient with Tridium AX
Familiarity with Tridium R2
Proficiency working with controls from two or more of the following vendors: Distech, Johnson Controls, Trane, Barber Coleman, Circon, Invensys I/A, Siemens, Honeywell