Qualification Engineer Job Description
Qualification engineer
provides high-level support and technical expertise in networking technology, including 802.11x access points, bridges, routers, Ethernet switches, etc.
Qualification Engineer Duties & Responsibilities
To write an effective qualification engineer job description, begin by listing detailed duties, responsibilities and expectations. We have included qualification engineer job description templates that you can modify and use.
Sample responsibilities for this position include:
Apply and support Lean Manufacturing principles
Expected to act as primary test engineer during ground and flight operations
Able to communicate clearly and in writing all facets of flight test program to include test plans, ground and flight test procedures and test reports
Perform Test and Evaluation (T&E) activities under minimal supervision
Will act as primary test engineer during ground and flight operations
Communicate clearly in writing all facets of flight test program to include test plans, SIL, ground and flight test procedures and test reports
Ability to travel and lodge under military conditions is a requirement for this position
After sufficient experience is gained this engineer is expected to be able to coordinate and lead a CSSQT operation
Schedule testing activities for an assigned project, estimate required hours and record actual vs
Performing System Test & Qualification Engineering activities on Unmanned Aerial Vehicle (UAV) programs
Qualification Engineer Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Qualification Engineer
List any licenses or certifications required by the position: EIT, AS907
Education for Qualification Engineer
Typically a job would require a certain level of education.
Employers hiring for the qualification engineer job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and University Degree in Engineering, Technical, Computer Science, Electrical Engineering, Science, Education, Physics, Mechanical Engineering, Computer Engineering, Chemistry
Skills for Qualification Engineer
Desired skills for qualification engineer include:
Ethernet
Bus technology in automotive: CAN
MOST
Audio technology
Concepts
Practices in related technical specialties
Principles
Theory
CANoe
National Airspace System and UAS operating rules and regulations thereof
Desired experience for qualification engineer includes:
Experience in electronic circuit development and/or design, testing and qualification with mixed signal (embedded microcontroller plus analog) systems
Familiarity with Lithium-based battery technologies and charging requirements is a plus but not a requirement
Specific experience with portable consumer electronic products or large format batteries will be an advantage but not a must for deserving candidates
Familiarity with test platforms such as ATE (automated test equipment) utilizing data acquisition and instrumentation control software such as Labview or similar test scripting
Some electronics design experience preferred with ability to review schematics and electronic board layout designs
5+ years in a Qualification position testing to the standards listed above, preferably in an aircraft or aerospace company
Qualification Engineer Examples
1
Qualification Engineer Job Description
Job Description Example
Our company is looking for a qualification engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for qualification engineer
- Will be required to support the test conductor for ground and flight tests, to include providing ground and flight crew support during tests
- Working with avionics, payloads and/or weapons integration and test at flight test facilities is desired
- Supplier Documentation (Specifications, MSDS, Hazardous Substance, Drawings)
- To investigate and provide solutions to problems found with existing products during manufacturing and test
- To provide fault diagnosis and solutions to hardware issues related to existing products
- To work with the systems and software engineers within the FP&S team to provide hardware solutions for new customer variants of existing products
- To be responsible for the control of own work to meet agreed technical, quality, process, cost and schedule requirements
- To document design activities, ensuring traceability of design to requirements, whilst also ensuring adherence to relevant project, company and regulatory standards
- To plan and manage hardware qualification activities and specify, design, commission and verify equipment test solutions
- To produce qualification test plans, test procedures, test case design, set-up test equipment and conduct post-test analysis and reporting
Qualifications for qualification engineer
- Must be capable of working independently and making solid decisions related to the testing of systems
- Providing effective and clear communication to management on status of projects
- Ability to interface well with customer
- Experience should include a diverse exposure to dosage forms including solid dosage forms
- Demonstrate the ability to follow and apply engineering knowledge
- Adapt quickly to challenges
2
Qualification Engineer Job Description
Job Description Example
Our company is growing rapidly and is searching for experienced candidates for the position of qualification engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for qualification engineer
- To support sales enquiries, working with the team manager and systems engineers, providing hardware solutions and estimates for work, especially in the area of hardware qualification requirements
- Act as primary test engineer during SIL, ground, and flight operations
- Communicate clearly and in writing all facets of the system test program to include test plans, procedures and reports
- Develop effective approaches to resolving issues
- Establish metrics for requirements traceability
- Analyze test and stress data to evaluate the Reliability performance of silicon IP & package aspects and materials
- Interlock with a cross functional team (Development, MFG quality, Test Engineering, PFA) to address/close all technical issues discovered during the qualification stresses (Voltage, Temperature, Package Environmental stresses)
- Effectively communicate with senior engineers and management data analysis results and qualification status
- Leads the delivery of Qualification documentation for automation projects, both internally and with external customers, for FlexFactory and related products
- Supports the definition of standard protocols that will be used across all projects
Qualifications for qualification engineer
- Familiarity with data dissemination tools
- Familiarity with system administration tools such as LINUX/UNIX, Windows operating systems
- Ensure the respect and compliance of the Qualification/Validation Quality System
- Review and approval of qualification documents (DQ-IQ-OQ-PQ) their execution
- Knowledges and experiences in Computerized System Validation or/and Cleaning Validation
- Active participation in Engineering projects
3
Qualification Engineer Job Description
Job Description Example
Our company is growing rapidly and is looking to fill the role of qualification engineer. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for qualification engineer
- Well recognized company in its field
- International team of research & development engineers
- Dynamic and informal team working on diverse set of fast-moving projects
- Multi-disciplinary hands-on experience using latest technologies in optics, electronics and mechanics
- Development and application of cutting edge solutions to interesting challenges
- Act as a test engineer during SIL, ground, and flight operations
- Hardware test execution in accordance with industry standards (such as RTCA/DO-160)
- Test setup design support
- Support test readiness and associated reviews
- Supplier Management / Subcontract Management
Qualifications for qualification engineer
- Provide proactive support to our key customers (Engineering, Production, Quality Control)
- Management of change control
- Management of deviations, investigations and CAPA
- Review of cleaning data generated for release
- Review and approval of procedures for our customers (Engineering, Production, Quality Control)
- Participation in the internal audit planning execution
4
Qualification Engineer Job Description
Job Description Example
Our growing company is searching for experienced candidates for the position of qualification engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for qualification engineer
- Reporting to team lead and/or management on project specific metrics/status
- Lead all MPM Qualification and certification activities for additive manufacturing systems
- Develop detailed MPM processes and maintain the MPM qualification and certification process
- Monitor the MPM process, and communicate progress to senior management
- Technical expert and contact point for internal and external customers initializing or installing MPM systems that require qualification and certification
- Provide Material processing support to SQE, NPI and Development Engineers as needed to support MPM qualification and certification initiatives
- 20% focus on transformational research and development which is appealing to the engineer
- Provide functional and technical mentoring to process technicians, NPI engineers, SQE engineers, Quality Engineers and other cross functional Engineers in all areas of the MPM qualification and certification process
- Planning software test for audio amplifier
- Design and develop test automation for automatic qualification tests
Qualifications for qualification engineer
- Minimum of 1 or more years of telematics/infotainment experience
- Minimum three years in IT systems and/or vehicle connectivity development
- Minimum one year in automotive electronics systems qualification
- Vibration Testing
- Temperature Testing
- Electrical Power variations
5
Qualification Engineer Job Description
Job Description Example
Our innovative and growing company is looking to fill the role of qualification engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for qualification engineer
- Performing system tests, plan and establish test equipment
- Analyse customer requirements to adapt test specification
- Plan and perform application level tests (ENG7-ENG8)
- Generate reports of performed tests including error reporting
- Setup automated test scenarios for regression-, standard-, performance- and persistence tests
- Create tooling for tuner test automation
- Adapt test cases in dependency of official CR
- Perform in-car driving tests
- Analyze detected errors together with development department
- Cooperate closely with developers
Qualifications for qualification engineer
- Enable projects to enter qualification on time and meet schedules requirements
- Support shift work where necessary
- To write Qualification test Reports
- Liaise with projects to ensure the test requirements are correct and are met during the initial and de-risk activities to ensure the qualification program runs smoothly
- Travel off site to support testing of EMC and other miscellaneous environmental tests
- HNC or equivalent level of knowledge and experience in a mechanical based subject appropriate to Qualification Testing