Molding Technician Job Description
Molding technician
provides support to the molding production department to ensure the quality of the product in the time it is needed and ensure the necessary equipment and tools to support the molding volumes.
Molding Technician Duties & Responsibilities
To write an effective molding technician job description, begin by listing detailed duties, responsibilities and expectations. We have included molding technician job description templates that you can modify and use.
Sample responsibilities for this position include:
Demonstrate the ability to troubleshoot, repair or replace all components of Norplas equipment
Associate’s Degree in a technical field of study required
Course work relating to injection molding an asset
Three years minimum injection molding experience preferred
Promote and train on injection molding and coating equipment as required by the job
Follow Plant and Departmental LEAN 5S guidelines
Train injection molding and coating personnel on fundamental process controls, material handling, material flow, mixing, and general injection molding and coating operations
Must be able to follow procedures and assist updating documentation, such as equipment Standard Work, Standard Operating Procedures, Make Orders, Standards, Operating Test Methods, Bill of materials, as needed
Strong working knowledge and able to train on injection molding and coating controls
Molding Technician Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Molding Technician
List any licenses or certifications required by the position: RJG, ASQ
Education for Molding Technician
Typically a job would require a certain level of education.
Employers hiring for the molding technician job most commonly would prefer for their future employee to have a relevant degree such as Associate and High School Degree in Technical, Associates, Education, Industrial, Computer, Manufacturing, Electronics, Engineering, General Education, Education and Training
Skills for Molding Technician
Desired skills for molding technician include:
Technical field/area of specialization
Plastic materials and processes
Molding process from raw material to finished goods with a thorough understanding of the effects of heat
Pressure
Time on the process and end product
Certification and regulatory requirements contained in ISO-13485
FDA CFR/GMP Medical Device Regulation
Setting tools for production and processing tools
Product quality specifications
Products produced in the department
Desired experience for molding technician includes:
Knowledge of current technology and state of the art in a wide variety of disciplines with familiarity in electronic controls, hydraulics, and pneumatics, standards development and statistical engineering, OSHA and FDA validation requirements
Requires a high degree of technical skill and experience in Injection Molding processing with a wide variety of polymers, high cavitation tools, and robotic automation
This position also requires the ability to collaborate with various other support groups (i.e., Facilities, Tool Shop, etc) to implement equipment installation and improvements
Associates Degree in Plastics Technology preferred
Knowledge of PLC Operations, Maintenance and Programming and the ability to read schematicsor machining, tooling design, tooling assembly and the ability to read part drawings
Forklift Certification and Certification RJG Master Molder 1 or higher prefered
Molding Technician Examples
1
Molding Technician Job Description
Job Description Example
Our company is growing rapidly and is looking for a molding technician. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for molding technician
- Set up, heat up, start up, operate, troubleshoot, and adjust process settings on the injection molding and coating equipment per standard
- Operate hoists and PIV’s that are required used in the area
- Adhere to waste stream profiles
- Assist department technical personnel with problem solving and experimental activities
- Assist maintenance with troubleshooting and equipment repair as directed
- Provide analysis, spreadsheets, charts, and graphs related to injection molding processes
- Active in process improvement teams
- Maintain good work ethic and confidentiality
- Successfully complete all designated training
Qualifications for molding technician
- Demonstrated problem solving and strong troubleshooting skills
- Injection molding troubleshooting skills required
- Programming/troubleshooting robotic/automated part take out systems or servo motors desirable
- Provide required communications to all levels in our focus factory
- Short notice shift coverage or on-call
- Possess a two (2) year technical degree or diploma in a Machine Tool Technology, Injection Molding Technology, Plastics Technology, or Tool and Die field OR minimum three (3) years of Injection Molding and Coating experience in lieu of degree
2
Molding Technician Job Description
Job Description Example
Our company is looking for a molding technician. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for molding technician
- Must have some knowledge of cooling systems and their repair the use of welders and other tools and equipment to perform needed repairs
- Ability to perform and diagnose hydraulic leaks and PMs
- General Knowledge of Electrical, Pneumatic and Hydraulic Blue-print Schematic Reading
- Ability to maintain machine functionality
- Ability to troubleshoot basic control circuits
- Basic shop tools (hand tools, drills, lathes and milling machine)
- Hydraulics theory & functionality
- Electronics’ theory
- Bridge & Rail Cranes
Qualifications for molding technician
- Experience with hydraulic and electric injection molding processes, and coating processes
- Experience in mold care, repair, installation & removal of molds
- Ability to set-up any mold tooling for production runs
- Program and adjust molding machine production programs
- Complete understanding of blueprint, inspection of parts, Sunbank workflow, and routing systems
- Ability to oversee, monitor, and perform all operations for the entire Plastic Injection Molding Department
3
Molding Technician Job Description
Job Description Example
Our company is growing rapidly and is searching for experienced candidates for the position of molding technician. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for molding technician
- Encoders / decoders theory
- Circuit design & layout
- Cutting & threading pipe
- Basic pneumatic troubleshooting & repair
- Building maintenance – plant lighting, compressors and emergency lighting
- Bending conduit and pulling wire
- Installation & set-up of motor contractors and VFDS
- PLC and HMI maintenance & troubleshooting (including Ladder logic)
- Advanced electrical and blueprint schematic reading
Qualifications for molding technician
- Complete understanding and knowledge of all machine controls
- Ability to perform cavity and core changeovers, maintenance of all mold tooling in the department
- Short notice shift coverage or on-call work
- Minimum one (1) year of experience working with Injection Molding Technology, Machine Tool Technology, Plastics Technology, or Tool and Die OR minimum one (1) semester of post-secondary education in Injection Molding Technology, Machine Tool Technology, Plastics Technology, or Tool and Die in lieu of experience
- Possesses or in the last six (6) months of completing a two (2) year technical degree in a Machine Tool Technology, Injection Molding Technology, Plastics Technology, or Tool and Die field OR minimum three (3) years of Injection Molding and Coating experience in lieu of degree
- Must meet company forklift certification
4
Molding Technician Job Description
Job Description Example
Our innovative and growing company is hiring for a molding technician. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for molding technician
- Wire control circuits for 5, 12, 24, and 120 volts
- Advanced pneumatic circuit design
- Capable of sizing motor starters and overloads for an application
- Supports the quality system including the quality manual, quality policy, and applicable procedures and work instructions
- Consults with other Maintenance, Engineering and Manufacturing employees to identify and resolve all molding maintenance issues in a timely manner
- Identifies and troubleshoot processes, material or equipment problems to minimize down time
- Improves system performance to achieve process requirements and eliminate repetitive downtimes
- Performs preventative maintenance, equipment repairs, equipment improvements, equipment upgrades, and equipment installations on the factory equipment in assigned areas
- Performs tooling set-up/changeovers in a timely manner according to schedule
Qualifications for molding technician
- Interface with production control and the purchasing dept
- Minimum ten years experience in the technical aspects of molding systems
- Technical degree from an accredited school required
- Participate in cost saving / improvements projects
- Computer skills (word processing, spreadsheets, project presentations)
- English (preference)
5
Molding Technician Job Description
Job Description Example
Our growing company is looking for a molding technician. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for molding technician
- Ensures that maintenance coverage for production areas is provided for at all times
- Maintains 5S environment in work area and Tool Shop
- Follows lock out tag out procedures and all other safety rules where required
- Performs other task and assignments as assigned by Manager
- Perform preventative maintenance on molding equipment and molds
- Comply with GDP while executing records / forms
- Confer with technical and supervisory personnel to report or resolve conditions affecting safety, efficiency, or product quality
- Maintain quality standards by conducting in-process inspection, line clearance, accurately record data as it is collected and continually monitoring the process ensuring product meets specifications
- Communicate information to supervisors, co-workers, and technicians as required
Qualifications for molding technician
- Minimum four years’ experience in industrial trades
- Advanced skills for troubleshooting hydraulics as a part of process machinery
- Advanced skills for troubleshooting pneumatics as a part of process machinery
- Able to read and develop schematics for electrical, pneumatic, and hydraulic circuits
- Able to trouble shoot PLC programs and edit program path
- High School Diploma or GED and a technical degree required