Circuit Design Engineer Job Description
Circuit design engineer
provides high-level analysis for on-chip circuit architectures and assessing trade-offs to ensure specification compliance constrained power and area.
Circuit Design Engineer Duties & Responsibilities
To write an effective circuit design engineer job description, begin by listing detailed duties, responsibilities and expectations. We have included circuit design engineer job description templates that you can modify and use.
Sample responsibilities for this position include:
Mixed-Signal/Analog circuit design for High Speed Memory I/O Interfaces
Solve challenge of circuit designs in deep submicron (16nm and smaller) CMOS finfet processes
Take designs through productization and be involved in all stages of development
Work with cross functional teams to optimize the designs
Be the interface to the customer in technical interactions, feasibility analysis, design reviews, parameter estimations (like Power/Area )
Design circuit architecture to control and support radiating elements for overall array performance
Investigate new technologies and applications for phased arrays
Apply knowledge of broad engineering principles and collaborate with other engineering disciplines to meet all product requirements
Organize design effort on technically challenging designs to meet cost and schedule requirements
Work without appreciable direction and exercise considerable latitude in determining the technical objectives of an assignment
Circuit Design Engineer Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Circuit Design Engineer
List any licenses or certifications required by the position: DO-254, FPGA, FAA, DO-160
Education for Circuit Design Engineer
Typically a job would require a certain level of education.
Employers hiring for the circuit design engineer job most commonly would prefer for their future employee to have a relevant degree such as Master's and Bachelor's Degree in Electrical Engineering, Computer Engineering, Design, Engineering, Science, Technology, Physics, Electronics, Education, Computer Science
Skills for Circuit Design Engineer
Desired skills for circuit design engineer include:
Power-performance trade-offs in high-speed SerDes designs
Analog CMOS designs and topologies
Different CDR architectures
ESD requirements
APR
Any of these areas
Cost/schedule development and management
FPGA code development
Floor-planning
Memory IO training MRC and HAS/MAS specification documentation
Desired experience for circuit design engineer includes:
Broad circuit design and implementation knowledge with significant depth
Knowledge of package substrate, board design and power delivery is a plus
Working knowledge of Cadence custom design tools, various circuit simulators like Hspice, XA, FineSim, Spectre
Working knowledge of Verilog, Nanotime, Matlab is plus
Hands on with Lab test and measurement equipment is a plus
Requires strong fundamental understanding of transistor level analog design designs in deep submicron process
Circuit Design Engineer Examples
1
Circuit Design Engineer Job Description
Job Description Example
Our company is looking to fill the role of circuit design engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for circuit design engineer
- Mentor and guide junior-level engineers in the design, build and test of phased array sub-systems
- Write technically sound proposals and estimate related design costs and schedules
- Plan and implement world-class characterization facilities for present and future generation products
- Identify and reduce to practice novel approaches with advantaged product attributes
- Identify and integrate world-class talent for our growing team and provide technical and professional leadership to them
- Develop and efficiently execute test plans
- Exploring the trade-offs of the different approaches and propose the best solution to achieve or exceed the requirements in terms of power/area/linearity/bandwidth
- Design and develop circuits for embedded electronics applications
- Verify functionality and robustness of electrical design
- Develop and maintain design, analysis, test plan and test result documentation
Qualifications for circuit design engineer
- Hands on experience in design and analysis of low power circuits, power gating, decaps, multi-vt is required
- Understanding of Design-for-test(DFT) and logic design is a plus
- Prior leadership experience a certain plus
- Hands on experience in design and analysis of low power circuits, power gating, decaps, multi-vt
- Understanding of Place and Route design tools is a plus
- Post-Silicon data gathering experience is a plus
2
Circuit Design Engineer Job Description
Job Description Example
Our growing company is looking for a circuit design engineer. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for circuit design engineer
- Provide hardware support for development applications
- Participate in DFMEA reviews
- Collaborate with package development teams to ensure all die-level and package-level design rule checks are complete prior to mask generation
- Preparation of SLD, Protection Block Diagram, Interlocking logics and Data sheet for HV equipment
- CT VT sizing, battery and battery charger sizing calculations
- Prepare schematics of Control and Protection panels / Local control cubicles and associated manufacturing documents
- Coordination with Primary, FAT and commissioning activities and resolve issues arising in each of these stages
- Interface Engg with Primary equipment
- Cable engineering
- Auxiliary power system design
Qualifications for circuit design engineer
- Strong fundamental knowledge is essential
- Excellent oral and written presentations skills are required for team presentations, customer interaction and reviews
- 10 + years of proven circuit design experience in SRAM, CAM, RF, DP array structure, Place Route at deep sub-micron technology node (28nm, 16nm, 14nm, with 10nm experience preferred)
- Solid understanding of digital design flow, including design entry, simulation, layout verification, and parasitic extraction
- Hand on implementation at schematic entry, spice simulation, macro floor plan, cell placement, route track analysis, metal layer usage, base/leaf cell development, sub-module or block level integration’ Familiar with Linux/Unix operation system and be capable of write scripts with Shell, Perl or other utilities
- Familiar with CPU Architecture is a plus
3
Circuit Design Engineer Job Description
Job Description Example
Our company is looking to fill the role of circuit design engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for circuit design engineer
- Architecture, design and development of mixed-signal circuits for LPDDR4/4x @ 4.2gbps and LPDDR5 @ 6.4gbps
- Custom blocks include (not limited to) references blocks, band-gap, Rx/Tx, clock distribution, clocking delay elements (DLL/PLL) Custom schematic capture, SPICE analysis and exhaustive pre-silicon validation
- Should be well versed in a wide spectrum of circuit activities ranging from technical readiness, device and/or cell characterization, bit-cell simulations, critical path simulations
- Design custom blocks to meet stringent Power/Performance/Area constraints
- Proficient in all aspects of circuit design for custom digital blocks including schematic entry, functional verification, static timing analysis, Noise analysis, Reliability Verification
- Should have good understanding of layout design- Must possess good programming skills
- Behavioral traits for this position would include logical thinking, very good verbal/written communication, excellent interpersonal skills, ability to prioritize work, multi-tasking, good analytical and problem solving skills
- Knowledge of a wide spectrum of circuit activities ranging from technical readiness, device and/or cell characterization, bit-cell simulations, critical path simulations
- Should be familiar with all aspects of circuit design for custom digital blocks including schematic entry, functional verification, static timing analysis, Noise analysis, Reliability Verification
- Should have good understanding of layout design
Qualifications for circuit design engineer
- Team leadership experience is highly desirable
- Experience with JTAG test methodologies to test digital logic blocks within the DUT
- Experience with high speed digital circuits (e.g., serializer, deserializer, counters, dividers)
- Modeling of CDR and adaptive loops (using C, Matlab or Python)
- Facility with state of the art photonic performance simulation and modeling tools, such as FDTD in 2.5 and 3D representations
- A track record of invention, publication and industrial leadership at the state of the art via Current facility with commercial modeling and simulation tools or proven ability to design and implement your own tools, as via C-programming or MATLAB
4
Circuit Design Engineer Job Description
Job Description Example
Our growing company is hiring for a circuit design engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for circuit design engineer
- Knowledge of High-speed CMOS circuit design
- Defining the layout requirements and interacting closely with layouters verifying the circuitry post-layout
- Interfacing and supporting other disciplines like ESD, system engineering, digital design, firmware, component verification and production test, with the goal to integrate successfully mixed signal blocks into a global product
- Support silicon verification by proactively helping during the definition of the verification plan and during measurements interpretation
- Design module electronics which will include analog optical controls, optical device monitoring functions, linear and switching power supplies, ADCs/DACs and highspeed logic including FPGAs, microprocessors and memories
- Develop strategies for optimizing designs to efficiently implement complex functions while maintaining the ability to meet the physical constraints which include dimensions and power limitation requirements
- Interact, collaborate and work cross-functionally with optical, hardware, firmware, software, PIC and DSP design teams
- Contribute to developing optical, hardware, firmware and software integration test plans and reports
- Generate integration test procedures, test specifications and design verification test plan
- Provide status reports, keep track of deliverables, milestones and schedules
Qualifications for circuit design engineer
- Thorough understanding of Communication systems, Digital Signal Processing
- Active SSBI clearance preferred
- Must have a BS or MS in Electrical Engineering
- Minimum of 3 months experience/course work on digital and analog circuit design, computer architecture, data structures in any programming language
- Knowledge of electronic circuits and components
- Knowledge of microcontrollers, power supply circuits, and inverter circuits
5
Circuit Design Engineer Job Description
Job Description Example
Our company is hiring for a circuit design engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for circuit design engineer
- Technical lead for the development and implementation of high speed interfaces and analog circuits, mainly focus on the development of high speed clocking circuits, such as PLL/DLL, phase interpolator, high speed clock driver and receiver, transmission line
- Hands-on experience taking creative integrated circuit designs at data rates of 25Gbps and higher from concept through silicon characterization
- Work with layout engineers by providing detailed floorplan and guidance for matching and high-speed routings
- Design, implement, and simulate the functionality and performance of sigma delta (delta sigma) analog-to-digital converters (ADCs), including the modulator and digital decimation filter
- Design, implement, and simulate the functionality and performance of other various low power high resolution analog circuits
- Design, implement, and simulate the functionality and performance of digital control circuitry, such as SPI and I2C with proper timing analysis and methodology of physical development
- Integrate the analog and digital IPs, and run simulations to ensure the functionality and performance
- Define and drive the overall Mixed Signal ASIC and system architecture requirements for interface and peripheral IP
- Work with and provide direction to the Chip and IP verification teams to develop, review, and approve pre- and post silicon validation/test plans
- Work with the Physical Design, Packaging, and Board design teams to evaluate floor plans and packaging/IO implementation options and associated tradeoff
Qualifications for circuit design engineer
- Experience with circuit design and worst-case circuit analysis / simulation
- Experience using schematic-capture tools and circuit simulation tools
- Familiarity with Electromagnetic Compatibility issues associated with board layout and circuit design
- Experience with thermal constraints of circuit design and fundamentals of heat transfer
- Proficient in both analytical skills and hands-on work
- Familiarity with electronics manufacturing technologies (at the board level)