Advisor, Safety Job Description
Advisor, safety
provides regular quality assurance dam safety reports that summarize the monthly instrumentation and construction to the EOR and site construction groups.
Advisor, Safety Duties & Responsibilities
To write an effective advisor, safety job description, begin by listing detailed duties, responsibilities and expectations. We have included advisor, safety job description templates that you can modify and use.
Sample responsibilities for this position include:
Support supply chain activities and the raising of H&S standards
Provide complete equipment orientation including demonstrating and instructing clients and their representatives on the proper care and use of the equipment, ensure the protection and proper use of all field equipment while conducting field activities, including daily informal inspections, while on location to minimize potential loss
Lead on event investigation and close out
Monitor and report on H&S performance for the project
Assist in the investigation and reporting of accidents, incidents and non-conformances and make recommendations for corrective action
Liaise with statutory bodies as appropriate
Assist in the preparation of project H&S plans as required
Have a relevant CSCS card
Have SEATS or a relevant Environmental Certification
To ensure the availability and integrity of all the data that is required to generate compliant SDSs and labels
Advisor, Safety Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Advisor, Safety
List any licenses or certifications required by the position: NEBOSH, DOT, MSDS, CDL, OH&S, IMDG, IATA, REACH, GHS, PSC
Education for Advisor, Safety
Typically a job would require a certain level of education.
Employers hiring for the advisor, safety job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and University Degree in Health, Engineering, Education, Science, Industrial, Management, Medical, Technical, Medicine, Graduate
Skills for Advisor, Safety
Desired skills for advisor, safety include:
Construction site safety
Connecticut
Distribution
Instrumentation & Regulation
Massachusetts
State Departments of Public Safety requirements as they pertain to the electric and gas industries
Supply
System Operation’s practices and procedures
Construction practices and renewable energy practices is highly desired
Construction techniques
Desired experience for advisor, safety includes:
Monitor and report on operational HSE performance and make recommendations for improvement
University degree, preferably in Occupational Health and Safety
Monitor the assigned new and emerging regulations to provide early alert to all businesses
Perform impact analysis in accordance to new and updated regulations
Bachelor’s Degree in Chemistry/Technical/Science/Engineering with 3+ years of specific experience
At least 3 years of experience in a PEHS role preferred .Previous experience preferably in R&D, product management or EHS
Advisor, Safety Examples
1
Advisor, Safety Job Description
Job Description Example
Our growing company is looking for an advisor, safety. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for advisor, safety
- The development and delivery of HSE training packages to all associates providing them with the appropriate competencies required for the roles they undertake
- Conduct service centre (dock/office) and yard inspection audits, the semi-annual service centre facility inspections and report findings to management
- Certificate IV Workplace Trainer and Assessor qualification
- Ensure incident investigations are co-ordinated and effective in line with corporate and legislative requirements
- Produce management information and reports, completing analysis of issues and making suitable recommendations for resolution considering short and long term impacts
- Represent the organisation at national steering groups to support improvements to policy and procedures
- Provide regular communication throughout the organisation to promote a positive health, safety and environment culture
- Site inspections and risk assessments
- Site audits
- Incident investigation and preventative measures
Qualifications for advisor, safety
- Supports participates in addressing high risk (life critical) work activities
- Evaluate contractor suitability to perform work at NJ Facility from safety perspective
- Monitor the execution of the Permit to Work process for all work activities
- Producing H&S documentation and the upkeep of H&S records
- Ensuring compliance with SHE policy and procedures
- Providing practical H&S advice on the ground during site visits
2
Advisor, Safety Job Description
Job Description Example
Our innovative and growing company is looking to fill the role of advisor, safety. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for advisor, safety
- Provide front line general SHE advice on a day-to-day operational basis
- Provide advice on the SHE Strategy
- Access specialist support, on behalf of customers, from other areas of the business
- Sustaining relationships with local and country wide partnerships with fire departments, regulators
- Provide operational and functional management with advice on the prevention of accidents, ill health, environmental incidents and the practical implementation of the 82O SHEW Approach document and related policies
- Undertake site SHEW inspections as required
- When requested, advise on the preparation of SHEW risk assessments and Method Statements
- Ensure that appropriate Project SHEW performance reports are provided as required by Delivery North
- Obtain competency cards in line with company Competence Card Compliance policy, CSCS/CCNSG
- Have previous experience of working within the Water Industry for a demanding client and knowledge of Street works is ideal for this role
Qualifications for advisor, safety
- Bachelor’s Degree in Occupational Safety (desired), or Bachelor’s degree with relevant experience in Safety is a requirement
- A minimum of 5 years of experience working in a petrochemical/refining manufacturing plant
- Ability to manage new safety program development and implementation
- Ability to conduct regulatory and management system assessments
- Ability to communicate well to different levels of the organization and regulatory entities
- Ability to facilitate, manage, and coordinate large groups
3
Advisor, Safety Job Description
Job Description Example
Our company is hiring for an advisor, safety. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for advisor, safety
- Supports the implementation of Risk Reduction activities for BC Works
- On a daily basis, the Advisor must manage all the contractors on site
- Daily the Advisor must update the RAP tracker and make sure all deviations found for the day was closed out
- The Advisor shall not to allow any contractor to work in the Hazardous zone unless the contractor was accredited
- Ensure contractor conducts all checklists/registers on equipment & activities as per OHS Act and applicable regulations PPE issue & control, Fire equipment, Excavations
- Conduct an initial compliance check on all equipment coming onto site and verify compliance/calibrations (possibility introduce a sticker tag system) Gas testers, Defective tools / homemade tools
- Ensures that the company is in compliance with the Department of Transportation/CSA and other federal, state, provincial and local rules and regulations and standards
- Monitor at all times, via site visits and regular audits/inspections, the operation of company policies and procedures
- Attend client / company meetings as deputy for the SHE Function as and when requested
- Produce appropriate reports of a high standard which address any adverse circumstances or situations
Qualifications for advisor, safety
- Detailed knowledge of EHS issues most relevant to Oak Hill, machinery safety (zero access), chemical agents, ergonomics, occupational and environmental noise, workplace transport and waste management
- H&S Certificate or Diploma
- Good communicator, confident to instruct and issue directions in the event of HS&E breaches
- Ability to coach and influence individuals at all levels of an organization with contract partners
- Weekly HSSE Report
- Site Safety Meeting Minutes & Attendance Registers
4
Advisor, Safety Job Description
Job Description Example
Our company is hiring for an advisor, safety. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for advisor, safety
- Be a member of IOSH (Tech IOSH/Graduate) (or equivalent)
- Have working knowledge of the application of CDM Regulations
- Have proven experience in a similar role
- Have experience of working in the utilities industry
- Conducts inspections, compliance reviews and hazard assessments of research laboratories, research animal facilities and other support facilities
- Implement multi-disciplinary EHS programs including chemical, biological and physical hazard exposure monitoring, animal experimentation protocols, hazard communication and other program areas
- Samples for air quality, biological, toxic and other hazards
- Provide emergency response support (24 hour) throughout the University (on a rotating basis)
- Review, monitor and report on performance against the HSSE and compliance work plan
- Provide assistance and guidance to staff and Project Managers on HSSE management problems
Qualifications for advisor, safety
- Knowledge of analysis and reporting on H&S performance
- Experience with root cause analysis and investigation
- Has a solid, proven track record
- Maintains close contacts to local Department of Labour Inspectorate
- Able to check conformance of construction plant to statutory requirements and regulations
- Ability to develop material for awareness campaigns and communicate the relevant information to the site
5
Advisor, Safety Job Description
Job Description Example
Our company is looking for an advisor, safety. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for advisor, safety
- Ensure that all necessary steps are taken to meet the company’s environmental license conditions and to minimise environmental risks
- Take a lead where required to ensure UGL and its client systems and processes are implemented on site, and that the project can progress safely and productively
- Coordinate regional change requests and collect input into changes requested by others
- Support region in the incident management function inclusive of the incident reporting process, severity assessment process, investigation process, investigation quality and leadership review process, and corrective actions monitoring and reporting
- Provide leadership on assigned technical committees or task forces and serve as a technical subject matter expert
- Support the annual employee medical evaluation process (fit test, PFT, audiometric)
- Promote industry best practices by monitoring industry trends and identifying new technologies
- Complete H+S Audits against company and legislative standards and procedures
- Carry out annual documentation reviews
- Supporting new managers on their responsibilities under H+S
Qualifications for advisor, safety
- Infrastructure, Construction experience
- High school diploma or equivalent preferred, safety and health certification, Bachelor’s Degree preferred
- BCSP Certification Preferred
- 2+ years in a construction environment (Bachelor’s degree or higher may substitute for up to 2 years experience)
- In depth knowledge of the WH&S, Environment and Workers Compensation legislations
- Thorough knowledge of AS 4801, ISO 9001/14001, ISO31000