Tool Technician Resume Samples

4.8 (106 votes) for Tool Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the tool technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
KH
K Hahn
Kaylie
Hahn
448 Ebert Lock
New York
NY
+1 (555) 601 3233
448 Ebert Lock
New York
NY
Phone
p +1 (555) 601 3233
Experience Experience
Phoenix, AZ
Tool Technician
Phoenix, AZ
Roberts, Huels and Reichel
Phoenix, AZ
Tool Technician
  • Assists with the development of work standards for tool PM
  • Assist in the cost reduction activities, and process improvements
  • Works and trains under the guidance of Technical Specialist/Mold or Stamping Specialist to learn proper mold/stamping change techniques
  • Assist in the preparation of evaluations and reports
  • Performs all levels of tool PM
  • May assist in training new personnel
  • Has knowledge of injection molding machine to safely work on mold while still in molding machine
Los Angeles, CA
Tool & Die Technician
Los Angeles, CA
Stokes, Hermiston and Cole
Los Angeles, CA
Tool & Die Technician
  • Work with press operators and process for continuous improvement of the process and tool performance
  • Continuous Improvement Development
  • Identifies and develops process control improvement opportunities
  • Assist in developing and/or updating preventive maintenance procedures
  • Perform all duties and promote themselves in a manner that reflects Formet Expectations, Formet’s Visions/Values through Magna’s Employee Charter
  • Monitor and participate in ensuring all Key Performance Indicators (Safety, Quality and Productivity) are being achieved
  • Make hydraulic hoses
present
Boston, MA
Lead Tool & Die Technician
Boston, MA
King Inc
present
Boston, MA
Lead Tool & Die Technician
present
  • Provides daily tooling maintenance support for the Beaver Plant to include stamping dies, jigs, fixtures and other associated tools that affect the manufacturing processes
  • Demonstrates knowledge of measuring devices such as indicators, micrometers, height gages, gage blocks and pins, optical comparator, sine plates and associated attachments and accessories for such tools
  • Creates replacement parts and other items from dimensioned drawings and verbal instructions
  • Creates new components from existing ones by reverse engineering
  • Has the latitude to plan and organize work based on changing priorities and/or situations
  • Prepares and controls records, statistics and reports regarding the operation
  • Leads and instructs lesser qualified employees in tooling maintenance responsibilities
Education Education
Bachelor’s Degree in Precision
Bachelor’s Degree in Precision
Liberty University
Bachelor’s Degree in Precision
Skills Skills
  • Strong mechanical inclination
  • Able to work in a team environment
  • Able to work shift work
  • Surface Grinding
  • Mathematical skills
  • Organizational skills
  • Multi-tasking skills
  • Office and Manufacturing Environments
  • Problem Solving
  • Technical Expertise
Create a Resume in Minutes

15 Tool Technician resume templates

1

Tool Technician Resume Examples & Samples

  • Performs non- machining related tool repairs
  • Assists with the development of work standards for tool PM
  • Works and trains under the guidance of Technical Specialist/Mold or Stamping Specialist to learn proper mold/stamping change techniques
  • Uses basic and special hand tools for measuring equipment
  • Has knowledge of injection molding machine to safely work on mold while still in molding machine
  • High school diploma or GED with vocational/trade certification preferred and 1-3 years of molding experience preferably with tool maintenance/repair/cleaning or related experience in a manufacturing environment
  • Requires manual dexterity
2

Tool & Die Technician Resume Examples & Samples

  • Perform all duties and promote themselves in a manner that reflects Formet Expectations, Formet’s Visions/Values through Magna’s Employee Charter
  • Read and interpret engineering drawings and specifications of tools, dies, prototypes or models
  • Builds, services, maintains, repairs, installs and tests new or existing equipment or tooling, and verifies conformance to specifications
  • Troubleshooting of process problems and completes quality improvements as required to maintain part standards of quality
  • Modify tooling as per FEC procedures
  • Prepare templates and sketches, and determine work processes
  • Compute dimensions and tolerances and set up machine tools
  • Inspect, maintain, repair and modify designated machinery, equipment, process and facilities as assigned
  • Test completed tools, dies, jigs or fixtures for proper operation
  • Fit and assemble or disassemble parts using hand tools
  • Machine, fit and assemble casting and other parts to make precision models of required shape such as metal patterns, core boxes and match plates
  • Monitor and participate in ensuring all Key Performance Indicators (Safety, Quality and Productivity) are being achieved
  • Complete preventative maintenance on equipment and keep maintenance records to identify weakness in design
  • Communicate information throughout shift and at shift exchange
  • Support cross-functional repairs to equipment that includes Electrical, Mechanical, and Tooling provided it could be done safely
  • Continuous Improvement Development
  • Perform other duties as designated
  • Grade 12 diploma
  • Tool and Die Certificate of Qualification (430A)
  • Minimum two years of experience as an Industrial Journeyman
  • Strong mechanical inclination
  • Mathematical skills
3

Tool & Die Technician Resume Examples & Samples

  • Studies specifications such as blueprints, sketches, models, or descriptions, and visualizes
  • Computes dimensions, plans layout, and determines assembly method and sequence of
  • HS diploma or equivalent
  • 5 to 10 years as a tool and die maker with 5 years on fin dies experience
  • Knowledge of Hydraulic/pneumatic systems desirable
  • Self-starter and motivated to maintain building/machines to 100% uptime via strong preventative activities
4

Lead Tool & Die Technician Resume Examples & Samples

  • Provides daily tooling maintenance support for the Beaver Plant to include stamping dies, jigs, fixtures and other associated tools that affect the manufacturing processes
  • Has the latitude to plan and organize work based on changing priorities and/or situations
  • Leads and instructs lesser qualified employees in tooling maintenance responsibilities
  • Delegates work to lesser qualified employees so that work flow responds to production need
  • Receive functional direction from Feeder Engineer to ensure proper repairs and production schedules are address properly
  • Operates typical machine tools such as lathes, milling machines, saws, surface grinders and drill presses
  • Demonstrates knowledge of measuring devices such as indicators, micrometers, height gages, gage blocks and pins, optical comparator, sine plates and associated attachments and accessories for such tools
  • Understands the function of typical punch presses, feed mechanisms, material straighteners and de-coilers
  • Creates replacement parts and other items from dimensioned drawings and verbal instructions
  • Troubleshoots stamping and forming dies by evaluating the stock strip and finished parts
  • Disassembles and reassembles complex dies, fixtures and other tools
  • Troubleshoots and evaluates stamping and forming dies while in the press
  • Creates new components from existing ones by reverse engineering
  • Coordinates with cross functional teams to address production and quality related solutions in a timely manner
  • Responsible for the delivery of varied technical and professional activities
  • Prepares and controls records, statistics and reports regarding the operation
  • Maintains a self-motivated attitude to bringing repairs and larger projects to completion
  • High school diploma/GED from an accredited institution is required
  • Certificate of qualified training program in tool and die making AND/OR minimum 5 years of experience in tool & die is required
  • No relocation is being offered, candidates must reside within 50 miles of the site
  • Skills at interpreting mechanical drawings
  • Knowledge of measuring procedures, setups and interpreting results
  • General knowledge of mechanics and familiarity with hydraulics and pneumatics
  • Ability to prepare, analyze and maintain records and statistics for the operation
5

Maintenance Technician Tool & Die Resume Examples & Samples

  • Perform die maintenance on high pressure casting dies including assembly, CNC machining, TIG welding, hand grinding/polishing and testing
  • Perform emergency repairs on dies inside the press
  • Perform daily activities for improvements in Safety, Quality, Cost, Time, and 5-S
  • Work well in a team environment to help meet the Tool & Die KPI’s
  • Troubleshoot die issues and implement sound countermeasures
  • Proficient with metric dimensioning
  • Must be able to work in various temperature environments
  • Understand G-code and M-Code programming
  • Must have a minimum of a technical degree in Machine Tool Technology or a Tool & Die Apprenticeship with a minimum of 3 years die experience
  • Must be proficient with machine shop tools, CNC machines, CAD/CAM software & programming, TIG welding, and grinders. Casting knowledge preferred
  • Must be able to take an unpaid job assessment
  • Highly motivated individual with excellent analytical, written and verbal skills; good mathematical skills and troubleshooting skills; good computer skills; team oriented and good personal skills
6

Tool & Die Technician Resume Examples & Samples

  • Accurately perform Die PM’s in a safe and timely manner
  • Accurately perform die changeovers in a safe and timely manner
  • Maintain proper working condition and 5S of tools and equipment
  • Maintain time reporting and completion of shop work orders daily
  • Ability to troubleshoot progressive, transfer and conventional manual tools, make repairs/replace die sections from tool designs and reverse engineer when required
  • Demonstrate strong commitment to the PM process
  • Demonstrate commitment to all plant safety practices and procedures
  • Effectively communicate with Tool & Die Technicians and other associates in a team-based environment
  • Exercise good decision making and judgment skills and ability to work without direct leadership
7

Oses-tool Technician Resume Examples & Samples

  • Receive tools and log the rental information
  • Disassemble the tools using a hydraulic torque bench
  • Clean tools in a parts cleaner and with wire brush
  • Inspect disassembled components using precision measurement tools and log data
  • Rebuild tools according to specifications
  • Prepare shipping documents and log data
  • Inspect incoming new parts
  • Assist engineering with assembly and testing of new products or procedures
  • Maintain facility and test equipment
  • Work with supervisors and other technicians to maintain smooth workflow and a neat and safe environment
  • May travel to train operators on the use of tools
  • Must have hands-on experience with basic dimensional equipment
  • Must possess a general working knowledge of hand, power, and pneumatic tools to safely handle heavy tooling and parts
  • Basic knowledge of equipment and facilities maintenance procedures
  • Basic knowledge of inventory processes
  • Must possess a valid US Passport or be able to obtain one
  • Must be able to read and understand engineering drawings
  • Must have basic problem solving skills
  • Must have basic computer and documentation skills
  • Must be able to work overtime, weekends, holidays or on call as needed
  • Must be able to work well individually, in teams and or in groups
  • Must be able to rapidly adapt to changes and demands based upon workflow
8

Tool & Die Technician Resume Examples & Samples

  • Ensures safety in die repair area
  • Quality and adjustments to dies
  • Build and repair dies, report any problems pertaining to dies
  • Work with Machine Operators to resolve any issues with dies
  • Order repair parts and maintain supplies
9

Tool & Die Technician Resume Examples & Samples

  • Replace Die Sets in Press
  • Certify Die Sets to print prior to release for production
  • Prep press bed for new Dies Sets
  • Clean & rebuild Die Sets to print
  • Operate a variety of hand tools to spot, grind, and finish hardened tools, as well as build, assemble, install and adjust automation transfer devices
  • Work with press operators and process for continuous improvement of the process and tool performance
  • Anticipate die and operation problems and work to eliminate them before they happen
  • Maintain accurate documentation in computer based system
  • Maintains safe and clean working environment by complying with procedures, rules, and regulations
  • Organize, manage, and maintain tool inventories
10

Its-business Intelligence Tool Technician Resume Examples & Samples

  • Responsible for expert level system support for various systems within the data management realm of HCA. This includes end user support, configuration changes, governance adherence, etc. Ensure efficiency in system functionality
  • In coordination with ETS, configure, troubleshoot, maintain and coordinate the use of the agency enterprise data management tools including configuring and supporting these services
  • In coordination with ETS, monitor, evaluate and resolve system operational issues and monitoring alerts, including validating severity and determining root cause of discovered issues for applications such as Tableau, IBM suite of software for Master Data Management and Business Intelligence, and other related technologies
  • Resolves highly complex BI tool issues and documents the resolution --identify, support and make configuration changes when necessary
  • In coordination with ETS, perform major maintenance; implement testing and performance monitoring. Conducts capacity planning to determine agency-wide needs, and makes recommendations
  • Analyzes industry-wide trends and makes recommendations for improvements and efficiencies in system performance
  • In coordination with ETS, ensures tool security, monitoring system access, control, and evaluation; establishing and testing disaster recovery policies and procedures; completing back-ups; maintaining documentation
  • Participates in security design review session and obtain approval for implementing new technology solutions compliant with OCIO security standards
  • Understand the behaviors of the systems and troubleshoot issues that arise
  • Promote effective administration practices; performs specialized testing and analyses new releases of software
  • Maintain operational documentation regarding assigned services and systems
  • Understand and monitor Service Level Agreements and/or standards for relevant systems
  • Auditing of system usage and access, Evaluation of licenses when necessary
  • Provide expert technical/business consultation for enterprise data management related technologies in assigned area of specialty at a tier 2 and 3 level
  • Bachelor's degree or higher in Computer Science, Business, Business Analysis/Intelligence, or closely related field
  • Experience with server virtualization solutions
  • Knowledge of Information Technology Infrastructure Library (ITIL) best practices
  • Proficient with Software as a Service and other software management concepts
  • Proficient with Infrastructure as a Service
  • Experience monitoring Service Level Agreements
  • Knowledge of the Software Development Lifecycle (SDLC), configuration and release management principles
  • A cover letter (required)
  • Current resume (required, in addition to full application)
  • Three professional references (required)
  • Persons under final consideration for initial appointment with HCA are subject to a background check*
11

Tool Maintenance Technician Resume Examples & Samples

  • Provides proper maintenance of work shop and critical equipment and working space including general housekeeping, injection molding tools and other specified equipment as required by management
  • Prioritizes complex equipment repairs (molds, robotic, electronic, hydraulic and pneumatic systems), Identifies and maintains sufficient spare parts to avoid any interruptions of production levels
  • Works from routine and complex prints, sketches, drawn points, or verbal directions to fabricate precision machined parts and repair existing components. Works closely with outside vendors to expedite repairs as required
  • Maintains PM documentation in accordance with work instructions
  • Originates simple or complex setups on lathes, grinders and milling machine and maintains set ups. Performs needed repairs using MIG and TIG welding techniques
  • Coordinates tool shop equipment servicing with in-house service or external suppliers as necessary
  • Conscientious about details including accurate and legible documentation of hours and materials used on projects
  • Shares expertise of injection molds with Injection Molding personnel
  • Performs other duties as required or assigned, which are reasonably within the scope of duties listed above as related to plant mechanical and electrical systems. Maintains and administers specific training within the facility
  • Provides input to designers or engineers on parts configuration with alternative solutions for reduction of manufacturing complexity and tooling costs
  • Attend all departmental and plant meetings as required
  • Maintain confidential information as such
  • Minimum 5 years of relevant experience required
  • Requires extensive and practical knowledge of machining/mold making acquired through previous experience
  • Requires extensive knowledge and thorough understanding of mold design and construction
  • Requires extensive and practical knowledge of different materials and their workability, such as plastic to exotic tool steels and their uses
  • Ability to machine to the level of tolerance required by company products
  • Knows polishing processes and equipment needed to attain any required finish, from mirror to textured
  • Proficient on all standard/nonstandard shop tools and equipment, especially EDM
  • Ability to comprehend and interpret blueprints
  • Demonstrated knowledge and use of shop mathematics- applicable trigonometry. Able to solve right triangles
  • Advanced skills in tool room grinding, tool and die work, sheet metal, mold making, jig and fixture
  • Ability to provide a high level of customer service in the area of machining/mold making
  • Ability to respond to demand for precision work with a sense of urgency and meet deadlines
  • Ability to interact, collaborate, and communicate extensively, with professional technical staff in engineering and manufacturing
  • Ability to work effectively and efficiently as an individual contributor, team member, and leader
  • Ability and willingness to commit to continuous learning and keeping up with changing technologies in the field of model/mold making
  • Safety conscious, following safety rules, policies, and procedures
  • Demonstrated strong problem solving skills
12

Tool & Die Technician Resume Examples & Samples

  • Operate mills, lathes, grinders, wire EDM, CNC Mills
  • Build and repair fixtures, dies and jigs as needed
  • Program and operate CNC equipment
  • Trouble shoot and repair fixtures and tooling as needed
  • Reading of blueprints and GD&T
  • Fabricate fixtures and work holding tools as needed
  • Use precision tools such as: micrometer, calipers, indicators and set ups on surface plates
  • Past experience with Forming and progressive dies a plus
  • Past experience trouble shooting complex tooling a plus
  • Successful completion of core machining classes
  • Five ( 5 ) years machining experience in a tool room environment
13

Tool & Die Technician Resume Examples & Samples

  • Injection Mold Repair
  • Stamping Die Repair
  • Surface Grinding
  • Vertical Mill
  • Metric Measurement
  • OD/ID Grinding
  • Jigs/Fixtures
14

Tool & Die Technician / st Shift Resume Examples & Samples

  • Manufactures a wide variety of metal components through the operation of lathes, shapers, milling machines, drill presses, and similar equipment, gauging work carefully by using precision tools, fabricated mechanical devices, and units
  • Operates welding equipment and uses hand tools in the fabrication of mechanical devices
  • Maintains and repairs mechanical equipment
  • Makes jigs and fixtures (occasionally)
  • Replaces springs, punches shims, bolts, washers and all other components needed to complete the die
  • Considerable knowledge of the tools, equipment, materials, methods, and standard practices of the machinist's trade
  • Mechanical knowledge and attention to detail are a must
  • Considerable knowledge of the hazards and safety precautions of the trade
  • Some knowledge of welding trades
  • Ability to work from plans, blueprints, sketches, models, and oral or written instructions, and to exercise judgment in determining techniques and methods
  • Skill in the use and care of tools, machinery, and equipment of the machinist's trade
15

Tool Technician Resume Examples & Samples

  • Ensure compliance with Company policies and procedures (safety, quality, employment, expenses, training, PPE etc.) and inspect Injection tooling to defined specification
  • Complete and maintain documentation and records in accordance with the Company’s defined products
  • Assist in the development and operation of maintenance cost recovery
  • Maintain safe working practices, within the department and also in support of the wider safety agenda
  • Support 5s, business control and audit requirements
  • Support new part introduction development
  • Support the Team Leader in achieving team, departmental and individual objectives & KPI’s
  • Apprentice trained or equivalent experience
  • Competency in the use of hand gauges, inspection equipment and computerized measurement equipment
  • Experience of working in a lean manufacturing, production facility
  • Experience in operating Lathe, Bridgeport Milling Machine and Surface Grinder would be advantageous
  • Project a flexible, proactive approach, coupled with willingness to work overtime and shifts as required, to ensure the output objectives are achieved
  • Possess team player attitude with the ability to work to high standards and a positive can do approach combined with a collaborative team ethic
16

Tool & Die Technician Resume Examples & Samples

  • Follow required safety and work procedures
  • Disassemble, clean, inspect and reassemble extrusion dies and sleeves
  • Troubleshoot die flow and performance issues and ensure that dies are within appropriate tolerances
  • Report quality issues to the Team Leader/Supervisor
  • Maintain a clean and orderly work area to 5S Standards
  • Implement all aspects of AGCO Lean and Quality Management systems
  • Report any unsafe practices and/or conditions to their supervisor
  • Report all near-misses, incidents, injuries, illnesses, including mobile equipment or property damage
  • Minimum of two years of manufacturing experience
  • Knowledge of Six Sigma methodology
  • Ability to read blueprints, calipers and other measuring tools
  • Ability to read, write and use basic math skills (addition, subtraction, multiplication and division)
  • Ability to communicate effectively with peers, managers and across departments
17

Technician, Tool & Die Resume Examples & Samples

  • Working as technician in Phoenix Additive Manufacturing (AM) lab supporting Aero ME Product Engineering, ETS and Engineering and Technology to establish high yielding products made by 3D Printing Technologies/AM
  • Programmer and user of Direct Metal Laser Sintering and Electron Beam equipment and helps develops AM processes
  • Supporting AM process parameter development, associated quality system development as well as developing and performing processes adjacent to AM: Wire EDM, grinding, Hot Isostatic Press (HIP) and vacuum furnaces, 5 Aaxis and manual machining
  • Supports the New Product Development (NPD) Engineers and the Integrated Product Delivery and Support (IPDS) process (Phase 1-5) for successful and transparent product transition into manufacturing
  • Supports Product as well as Process Engineers for successful redesign and transition of traditionally manufactured hardware into certified AM-production
  • Ensures compliance to the Quality Management System (QMS) policies and procedures
  • Identify Root Cause Corrective Actions using processes such as Corrective Action Mistake-Proofing (CAMP)
  • Responsible for identifying innovated solutions to drive innovative design solutions as well as mitigate quality and schedule risk
18

Tool Technician Resume Examples & Samples

  • Implement the lean manufacturing systems and work closely with others toward this goal
  • Requires the proven ability to setup and operate machines such as saws, mills, grinders, lathes, shears, punch press, tool grinders and sharpeners
  • The position will be responsible for maintaining the tool room inventory including evaluating tools in production, reconditioning tools, issuing purchases orders and sending tools out to appropriate vendors for needed reconditioning and repairs
  • Requires ability to effectively use tool room measuring devices
  • Requires mathematical skill for simple problem solving, and ability to create and read engineering drawings, shop floor sketches
  • Required to safely operate fork lifts and lifting devices
  • Requires basic knowledge of pneumatic and hydraulic systems and their schematics
  • Maintain positive and effective working relationships with all team members
  • Performs other duties as required by management
  • Must have successfully completed a two year Technical school curriculum in Tool and Die/Machine Tool from an accredited school/institution or equivalent with documentation
  • Minimum 3 years experience in metal fabrication, welding processes, and machining
  • Must have general PC skills in Microsoft Excel, Word and Outlook. AutoCad is a plus
  • Must have strong knowledge of Machine tools
  • Positive, proactive, self-starter and team player
  • CNC Programing a Plus
  • Must pass skills based tests – (i.e Machinist, Tool Technician and Forklift)
19

Rmep-tool Change Technician Resume Examples & Samples

  • Team Work: Able to share credit with co-workers; display enthusiasm and promote an effective working environment; work closely with other teams as necessary; support group decisions and solicit opinions from co-workers; display team spirit. Treat others with respect and dignity
  • Commitment to Task: Able to take responsibility for actions and outcomes and persist despite obstacles; give long hours to the job when necessary; demonstrate dependability in difficult circumstances and show a sense of urgency about getting results
  • Integrity: Able to be tactful, maintain confidences, and foster an ethical work environment; prevent inappropriate behavior by co-workers; give proper credit to others; handle all situations honestly
  • High School or GED or equivalent
20

Tool & Die Technician Resume Examples & Samples

  • Perform preventative maintenance as required
  • Clean and organize area, keep area free of clutter and safety hazards – 6S
  • Reads and interprets blueprints or works from verbal or written instructions or from the part to be copied or fitted
  • Plans the setup and operation of all types of machine shop tools, considering types of material, tolerances, types of cutting tools, coolants, lubricants and machine tool feeds and speeds
  • Heat-treats and welds parts as required
  • Determines specifications for inspection of work, using precision measuring and gaging tools, performing required inspection before, during and after machining
  • Performs hand operations involved in producing jigs, fixtures, tools and dies. Uses hand tools of the trade
  • Fits and assembles jigs, fixtures, tools and dies. Sets up, runs off and tests dies to produce a product to specifications, tracing die difficulties to their source and correcting same
  • Tear down, repairs and reassembles tooling on the bench or in the press as required
  • Assist’s other tool room personnel with troubleshooting skills or ideas
  • Assist’s cell leaders with troubleshooting tooling during production runs
  • High degree of precision and control in work where damage could be high and where muscular control and delicate touch are required
  • High degree of attention and care required, preventing injury to self and others when operating machine tools
  • Possess good troubleshooting skills
  • Able to pull and set-up tooling
  • Must have valid forklift operator’s card (or be willing to be trained before starting job assignment)
  • Process hourly/daily paperwork as required
  • Does in-press P.M.’s as scheduled
  • Regular and punctual, in-person attendance is required
21

Tool & Die Technician Resume Examples & Samples

  • Build fabrication dies
  • Design & build equipment safety guards
  • Setup & operate manual mills
  • Repair broken dies
  • Some steel/aluminum fabrication work
  • Make drill jigs
  • Setup and operate surface grinders
  • Make hydraulic hoses
  • Heat-treating steel
  • Drive forklifts
  • PM shop equipment
22

Tool & Die Technician Resume Examples & Samples

  • You understand and will comply with OSHA, safety, and PPE requirements and standards
  • Are able to read and apply blueprints as well as engineering changes
  • Understand quality requirements to ensure fixtures comply with customer requirements and apply the production escalation process as required
  • Keep your area clean and perform the daily 5s
  • You possess a high school diploma or GED
  • Manufacturing, Journeyman (or comparable) Experience-at least 5 years tool and die