Technician, Mechanical Resume Samples
4.8
(88 votes) for
Technician, Mechanical Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the technician, mechanical job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
BJ
B Jast
Beverly
Jast
309 Alverta Turnpike
Los Angeles
CA
+1 (555) 708 4958
309 Alverta Turnpike
Los Angeles
CA
Phone
p
+1 (555) 708 4958
Experience
Experience
Chicago, IL
Technician Mechanical
Chicago, IL
Heaney, Nitzsche and Heaney
Chicago, IL
Technician Mechanical
- Identifying opportunities for continuous improvement and assist in the implementing of the new initiatives in a constructive way
- Monitor and report against the Fixed Plant Maintenance work plan and elevate unplanned and non-routine activity or performance to the Supervisor
- Undertake training on a regular basis and provide support and coaching to work mates within area of competence
- Ensure compliance to 1SAP process for work execution and capture related transactional data into the 1SAP system
- Use of computerised maintenance systems (SAP), including time confirmations, raising notifications and closing work orders
- Clearly communicate equipment status to team management and location customers
- Ensure all work is carried out according to Environmental regulations and licenses
Philadelphia, PA
Technician, Mechanical
Philadelphia, PA
Koss LLC
Philadelphia, PA
Technician, Mechanical
- Works in a team or as an autonomous group performing work orders and providing technical support
- Perform any other job duties as directed by the Area Manager
- Perform any other job duties as directed by management
- Performs remedial and preventative maintenance and maintains facility appearance and safety through good housekeeping practices inside and outside of the facilities
- Routine maintenance of centrifugal pumps and electric motors such as bearing and seal replacements, alignments, couplings, sumps, fans, drain piping modifications, etc
- Tracks, develops and leads all mechanical maintenance work
- Obtains services from contractors to perform specialty services and supervises their work
present
Phoenix, AZ
Maintenance Technician Mechanical
Phoenix, AZ
Runolfsdottir, Stehr and Hane
present
Phoenix, AZ
Maintenance Technician Mechanical
present
- Assists in the development and coaching of less senior Technicians
- Makes advanced repairs and adjustments to mechanical and electrical devices
- Performs equipment repair and modification in a competent complete manner in accordance with documented procedures and workmanship standards
- May perform basic machining duties
- Maintains a clean and safe work area
- Records all maintenance and failure events immediately and accurately using the most up to date Computerized Maintenance Management System
- Initiates and installs improvement projects
Education
Education
Associate’s Degree in Electronics
Associate’s Degree in Electronics
Kent State University
Associate’s Degree in Electronics
Skills
Skills
- Ability to follow directions and ensure a safe and high quality product and production environment
- Strong interpersonal and communication skills, and the ability to work within a team environment
- Participates in available cross training to effectively develop skills in areas specific to other technicians
- An ability/desire to maintain orderliness and cleanliness in the maintenance of equipment
- A basic understanding of fabrication skills such as welding, cutting, grinding and machine work
- Ability to optimize work to effect a minimal amount of overtime
- Knowledge of mechanics, pneumatics, hydraulics and electricity
- Have good verbal and written communication skills
- Excellent manual dexterity
- Strong Electronics and Mechanical background including assembly, tuning and troubleshooting Electronic/Mechanical devices
15 Technician, Mechanical resume templates
Read our complete resume writing guides
1
Technician Mechanical Resume Examples & Samples
- Ensure the safety, reliability and show quality of assigned assets
- Installation, repair and maintenance work includes pumps, motors, controllers, fixtures, piping, valves, fittings, strainers, sand filters, water heaters; drinking fountains, eyewash stations, drains and sewer systems, diversion valves and lift stations
- Clearly communicate equipment status to team management and location customers
- Demolition of existing, and/or installation of new, systems or components – Uses hands and power tools to install, remove or disassemble the above listed items. Involves hand and arm movements such as power gripping, lifting above/below the waist, standing, bending, and stooping
- Preventive maintenance of restroom facilities, water treatment, and plumbing systems/equipment. This will entail pushing/pulling equipment less than 50 lbs., lifting tools and equipment less than 50 lbs., climbing stairs and ladders while grasping parts and tools. May work indoors or outside during inclement weather and on any shift. Requires frequent handling of powered/manual tools weighing 5-50 lbs
- Operational and functional checks of plumbing and water treatment systems and equipment – Start up and operation of pumps and motors, sand filters, chemical injectors, fountains and water effects. Takes water samples and performs chemical testing/reading. Performs opening/closing of gas, compressed air, and hot/chilled/potable water valves. Must have the ability to follow checklists or standard operating procedures
- Identification and evaluation of problems or conditions – Understands the function and proper operation of systems and equipment to pinpoint and assess causes of malfunction or failure. Reads and understands blueprints/schematics, specifications and other technical publications associated with the design and construction/installation of systems and equipment
- Material and tools/equipment handling – Lifting, carrying, and loading of system components, repair parts, and/or tools/equipment on vehicles, work benches, or job locations. Activities require bending, pushing/pulling, and lifting/turning. Uses hoists or cranes to move heavy loads and weight handling equipment to transport to distant destinations
- Manage assigned workload through the use of CMMS system (MAXIMO) - Will be required to attend and pass compliance and other associated training to ensure correct maintenance documentation. Requires computer literacy. Evaluate job scope, determine needed parts/materials, and order through authorized vendors
- Carry out any miscellaneous tasks as directed by management
- Good hand work experience and skill
- Experience at Lock out Tag out procedure and process will be plus
- Knowledge of different kind of mechanical components and plumbing system
- Over 2 years relevant working experience in mechanical & plumbing maintenance field
- Hold senior level of mechanical bench work license will be plus
- Good communication skills – ability to relate to fellow Cast Members, management, vendors, and other Cast from Disney divisions outside the Resort
- Spirit of cooperation
- Ability to read and interpret technical drawings and specification
- Ability to use the various bench work tools and devices
- Understand how to identify the hazard material and hazard waste during maintenance and proper treatment methods; understand the fall protection equipment and its correct selection and usage in power distribution equipment maintenance; familiar with maintenance related personal protection equipment types and the correct selection and usage; Understand various dangerous resources control during maintenance in order to prevent the damage from happening; understand the fire protection knowledge and emergency treatment knowledge in working area; familiar with the response and treatment for leakage; familiar with power distribution equipment maintenance working area safety reminder items; understand the damage and accident report and investigation process
- Available to work Sunday through Saturday, all shifts (i.e., 1st, 2nd, and 3rd shift) as deemed required by management
- Available to work on holidays
2
Senior Technician, Mechanical Resume Examples & Samples
- Cleaning of vehicles, assemblies, and components. Use tools and parts washing machines, both automated and manual, to remove greases, oils, dirt, old gaskets/silicone, and carbon buildup on automotive parts to prepare for further inspections
- Pass all compliance required technical and safety training, get the related certificates
- Troubleshooting for ride failure. Support management to do RCA (Root Cause Analysis)
- Support Attraction engineering service manager to determine needed parts/materials
- Good communication and cooperation with rides operation team
- Commitment to teamwork and guest satisfaction
- 6 years working experience in mechanical maintenance; Demonstrated trouble shooting skills, as well as continuous improvement maintenance skill
- Maintenance Experience working with JV or MNC is preferred
3
Cadd / BIM Technician Mechanical Resume Examples & Samples
- Proficient in Revit MEP, AutoCAD MEP, and Microsoft Office
- 5 years experience in the field of HVAC and plumbing design of buildings preferred
- Experience in design of HVAC and plumbing systems for large commercial and institutional projects
- Healthcare, Science and Technology and/or Civic facilities experience preferred
- Associates Degree or applicable experience in mechanical drafting
- Experience in sustainable design preferred
4
Service Technician Mechanical Fifo Resume Examples & Samples
- Qualifications in a mechanical trade and a post trade experience of at least 3 years and previous experience working on Diesel Engine and hydraulic systems
- Surface and underground mining and heavy mobile equipment experience is desirable
- Experience with Sandvik products will be a distinct advantage
- Strong customer service attitude as well as a drive and determination to achieve targets and goals
- Must hold a current National Police Clearance
- Must have the ability to work underground
- Must be able to work rostered shifts
5
Technician, Mechanical Resume Examples & Samples
- Performs layout, fabrication, assembly, installation, operation, maintenance, modification, and testing of mechanical components, apparatus and equipment
- Sets up and operates equipment, test apparatus, test equipment, diagnostic devices and related equipment
- Devises, fabricates and assembles new or modified mechanical components or assemblies
6
Senior Technician, Mechanical Resume Examples & Samples
- Performs layout, fabrication, assembly, installation, operation, modification, and testing of experimental components, materials, apparatus and equipment at an advanced level
- Sets up and operates equipment, test apparatus, test equipment, and related equipment
- Builds experimental apparatus, instrumentation or systems of considerable complexity
- Evaluates the form, fit, and function of components, apparatus and equipment for adherence to project objectives
- Records test procedures and results, performs routine analysis and calculations, and makes recommendations for changes in equipment, product or test method
- May provide guidance and work leadership to less-experienced technicians
- 3-5 years of related experience fabricating, maintaining and repairing mechanical components
7
Senior Technician, Mechanical Resume Examples & Samples
- Performs layout; fabrication; assembly; installation; operation; modification; and testing of experimental components; materials; apparatus and equipment at an advanced level
- Sets up and operates equipment; test apparatus; test equipment; and related equipment
- Evaluates the form; fit; and function of components; apparatus and equipment for adherence to project objectives
- Records test procedures and results; performs routine analysis and calculations; and makes recommendations for changes in equipment; product or test method
- 3-5 years of related experience fabricating; maintaining and repairing mechanical components
8
Senior Technician, Mechanical Resume Examples & Samples
- Ability to read and follow engineering drawings in the fabrication and assembly of mechanical systems
- Ability to use standardized tools and test equipment including calipers; micrometers; bore gages; digital height and depth gages
- Familiarity with a variety of shop equipment including CNC machines; milling machines; lathes; sand blasters; drill presses; aluminum; steel; and ABS plastic welding machines
- Ability to coordinate small boat operations in support of SDV diving operations
9
Ride Technician, Mechanical Resume Examples & Samples
- Accept technical direction from planning, technical and engineering sources and conduct and implement required actions, including preventive and Corrective maintenance activity etc.; deliver the good quality maintenance, ensure the rides safety and reliability; Carry out minor modification of rides if needed
- Operational/Functional checks - conduct checks of systems/equipment to verify operational integrity, identify and isolate faults and discrepancies, and verify operability following maintenance actions
- Join the rides installation, testing and adjustment during the project phase, support WDI team and finish the assignment by them. Proactively learn and grasp the rides equipment and system
- Proactive to Read and understand detailed instruction, manual, drawings etc.， apply it in daily maintenance
- Prepare maintenance record to Support MAXIMO specialist, ensure correct maintenance document accurate and timely
- Vocational school or above
- Able to read schematic drawings
- Available to work all shifts (i.e., 1st, 2nd, and 3rd shift), weekends and holidays as deemed required by management
- Being able operate at elevated high
- Mechanical Engineering or electromechanical is preferred
- Working experience in amusement facilities and hold the certificate is preferred
- 8+ years working experience in mechanical maintenance; Demonstrated trouble shooting skills, as well as continuous improvement maintenance skills
- Previous multinational company experience is preferred
10
Technician, Mechanical Assembly Resume Examples & Samples
- Assemble and/or troubleshoot mechanical assemblies following all established manufacturing processes and procedures in alignment with AS9100 standards
- Repair or work on existing assemblies
- Work with Engineering, Optics, Coating, Machine Shop and Quality Assurance on ensuring standards are met and product conforms to customer requirements
- Participate in the development of new product release (testing, assembly process and documentation)
- Previous work experience in an AS9100 and Lean Manufacturing environment is an asset
- Working knowledge of Kanban a definite asset
- Good hand-eye coordination/dexterity
- Solid mechanical aptitude and related abilities
- Ability to read and interpret technical drawings
- Good written and verbal command of the English language
- Good interpersonal and communication skills that translate into working in a team based environment
- Post Secondary Diploma - Mechanical Technician
- 1-2 years experience in the field of mechanical assembly and troubleshooting electronic/mechanical devices
11
Senior Technician, Mechanical Resume Examples & Samples
- Must have a clear understanding of the requirements specified in the U.S. Navy Diving And Manned Hyperbaric Systems Safety Certification Manual SS521-AA-MAN-010
- Must have a clear understanding of the requirements specified in the U.S. Navy Precision Cleaning And Testing Standards MIL-STD-1330
- Must be experianced in the operation of a Class 100,000 clean room
- Must have a clear understanding of the U.S. Navy General Specification For The Design, Construction, And Repair Of Diving And Hyperbaric Equipment TS500-AU-SPN-010
12
Technician, Mechanical Assembly Resume Examples & Samples
- Assemble and/or troubleshoot optical/mechanical assemblies to required design specifications
- Align and set optics into mechanical assemblies using various measuring tools and equipment
- Follow all established manufacturing processes and procedures as per AS9100 standard
- Repair or rework existing assemblies
- Work with Design and Manufacturing Engineering on development programs or process re-engineering initiatives
- Participate in the development of work instructions for NPI
- Ability and skill with measuring tools, lasers and optical alignment equipment
- Excellent command of English language, including verbal and written skills
- Ability to read and understand optical drawings
- Excellent hand/eye coordination
- Diploma related to optics, or equivalent in work experience
- Knowledge of Lean Manufacturing/Kanban considered an asset
13
Senior Technician Mechanical Test Resume Examples & Samples
- Computed Aided Design (CAD) Experience
- Machine Shop CNC Experience
- Experience with running ASTM testing
- Experience with Closed Loop Control systems
14
Assoc Technician, Mechanical Resume Examples & Samples
- Performs routine fabrication, assembly, installation, operation, maintenance, modification, and testing of mechanical components, apparatus and equipment
- Sets up and operates various types of fabrication equipment and testing devices to provide specified technical support tests
- Determines the methods for fabricating parts
- Records test procedures and results and makes recommendations for changes in equipment, product or test method
- 0-1 year of related experience fabricating, maintaining and repairing mechanical components
15
Technician, Mechanical Resume Examples & Samples
- Performs maintenance for aerospace ground equipment special purpose vehicles under general supervision
- Skilled in the use of hand tools, air tools, riveters, and sheet metal and machine tools such as shears, breaks, notchers, saws, milling machines, lathes, etc., as well as measuring tools, test instruments, and painting equipment
- Plans and performs installation and test of mechanical modifications to, and preventive maintenance, troubleshooting, and repair of mechanical and structural components for, complex systems such as military shelters, aircraft (including engine (s), ground vehicles, etc. as may be applicable
- Works from, and assists in the development of, engineering drawings
- Technical training school in operational maintenance for aerospace ground equipment or air force special purpose vehicle mechanics
- Three or more years of experience in heating, ventilation and air conditioning (HVAC) operations
- Experience working with common hand and power tools used in a mechanical environment
- Experience working with auto body repair
- Experience working with computers and Microsoft Office
- Possess Secret security clearance if required by contract
- High School diploma plus four years of relevant experience
- Ability to operate and service equipment
- Ability to work independently but follow specific, detailed instructions
- Ability to interface with various levels of personnel in a multi-cultural team-oriented environment
16
Technician, Mechanical Build Resume Examples & Samples
- Provides technical support to engineers on a variety of moderately complex technical tasks
- Provide highly technical expertise and skills in development and repair of prototype hardware, use of numerical control machines, and knowledge of shop practices, etc
- Perform in all phases of hardware manufacturing process
- Develop standards, procedures, and guidelines for tasks being performed
- Five or more years of related experience
- Experience working with math concepts
- Experience with drafting
- Two year Technical School diploma plus five years of relevant experience
- Ability to make and maintain records of technical computations
- Ability to use engineering equipment, instruments and testing devices
- Ability to maintain effective work relationships
- AV-8B, F402 and/or related support equipment program experience a plus
- Secret Clearance a plus
17
Technician, Mechanical Test Resume Examples & Samples
- Provides technical assistance in the analysis of technical products, systems and/or software for engineering support
- Outlining, setting up, and operating environmental test equipment that will meet specification requirements
- Perform in all phases of hardware environmental testing, recording of test data, pointing out deviations resulting from equipment malfunction or observational errors
- Participate in hardware evaluations
- Develop test procedures and report test results
- Nine or more years of experience in relevant engineering field
- Experience working with process and/or system design concepts
- Experience working with engineering principles and practices
- Two year Technical School diploma plus nine years of relevant experience
- Personal computer and business solutions software skills
18
Maintenance Technician Mechanical Resume Examples & Samples
- Ensure compliance to the 1SAP process for work execution and capture related transactional data into the 1SAP system
- Safely execute work orders as per schedule and relevant work instructions associated with the work orders
- Active involvement in the maintenance planning process
- Efficiently resurrecting the plant and equipment from a breakdown situation and employ root cause analysis to prevent reoccurrence
- Assist with contractor supervision during plant shutdowns
- Active involvement in continuous improvement program's
- Assist with the development of shutdown plans
- Provide input into root cause analysis and subsequent resolution of issues affecting equipment reliability
- Ensure returns of unused or reparable materials are processed accurately
- Identify inefficiencies and work to remove such inefficiencies with the support of your Line Manager
- Trade/certificate in Mechanical Fitting
- Valid Australian C Class manual driver's license
- HIAB, EWP, Forklift, Dogging and Rigging Certificates (desirable)
- Sound communication and interpersonal skills
- Ability to work well within a team to achieve outcomes
- Experience with a safety management system
- Experience with iron ore processing
- Experience troubleshooting crushing, conveying and hydraulic systems
- Experience with statutory compliance requirements for Mine Safety and Inspection Act
19
Technician, Mechanical Resume Examples & Samples
- Routine maintenance of centrifugal pumps and electric motors such as bearing and seal replacements, alignments, couplings, sumps, fans, drain piping modifications, etc
- Maintenance on other mechanical equipment such as block valves, control valves, air compressors, valve actuators, etc
- Maintenance and repair of reciprocating engines and associated components
- Assist with replacement of pumps, motors, valves, and other equipment as needed, including foundation work, initial alignment, testing, and startup
- Must meet the requirements of the Company's Operator Qualification program to perform identified covered tasks and remain compliant or work under the direct supervision and observation of an individual who has previously been qualified with the Company's and Code of Federal Regulation requirements
- Reviews procedures as necessary to ensure compliance of all company and industry standards to meet all regulatory agency requirements
- Properly completes records of time and required regulatory reports
- Maintains close contact with the Area Supervisor regarding maintenance trouble reports and scheduled equipment maintenance to effect a minimum interruption of product throughput
- Performs remedial and preventative maintenance and maintains facility appearance and safety through good housekeeping practices inside and outside of the facilities
- Participates in available cross training to effectively develop skills in areas specific to other technicians
- Utilizes precision tools and test equipment as needed
- Responds to operational emergencies as a member of an area emergency response team
- Performs regulatory required inspections
- Obtains services from contractors to perform specialty services and supervises their work
- Trains and guides others to learn duties of Mechanical Technician
- A minimum of a High school diploma or G.E.D. equivalent is required
- A minimum of 3+ years mechanical experience is required
- A minimum of 5+ years gas-fired, engine-driven compressor experience is preferred
- Strong mechanical aptitude with basic troubleshooting and maintenance skills is required
- Experience in maintenance and repair of reciprocating engines and associated components is required
- Must have a current driver's license and good driving record
- The ability to modify communication style in order to influence, persuade, negotiate, and engage all parties according to the audience and circumstance is required
- Uses physical force to lift, push, pull and hold equipment and tools
- Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position
- May work in confined spaces (i.e. tanks, between compressors, vessels)
- Must have ability to get in and out of vehicles regularly and ride over rough roads
20
Lead Technician, Mechanical Resume Examples & Samples
- Carry out maintenance routines, including field inspection, cleaning, top up oil, condition monitoring
- Coordinate with operators and contractors on schedule, equipment release, work permits, job risk analysis and test-run
- Lead and supervise repair activities according to instructions from immediate supervisor or the production supervisor as per its priority
- Troubleshooting and cause analysis of failures, to reduce repeated failures
- Record the maintenance and repair s, and report unsolved problems to engineers
- Adhere to the plant safety regulations, correct and report all unsafe behaviors of contractors and unsafe conditions
- To be involved in Plant Turnaround, including Work-list preparation, material/spare parts preparation, scheduling, safety and quality control etc
- Site-wide mechanical installation& improvement small projects and MOC implementation
- In-house contractor coordination; Purchasing requirement for spare parts; Support to projects, like BPI2 and PA6, such as punch-listing and commissioning
21
SD Onshore Lead Maintenance Technician Mechanical Resume Examples & Samples
- Completion of a recognized apprenticeship with minimum of 10 years (8 years if apprenticeship served) experience within the offshore/onshore oil/gas or chemical industry
- Have sufficient Technical understanding of Projects, Commissioning, New Plant start-up, pipelines, high pressure gas and condensate facilities to be able to make informed decisions that ensure priorities are met and maintained
- Have an excellent understanding of all aspects of Onshore High Pressure Gas Maintenance Operations with an established and proven track record working in both Operations and Project environments
- Have experience as acting as a Performing Authority within a Permit to work system
- Have worked in Onshore or Off-shore high pressure gas processing
- Experience working with large centrifugal gas compression, screw compression and gas turbine equipment
- Demonstrate well-developed interpersonal skills, self-motivated and able to work with the minimum of supervision showing a strong sense of team involvement, information sharing and mutual support
- Further requirements are open mindedness, the ability to challenge conventional methods of working and team demarcation lines and to examine options and possible solutions. Be able to motivate and engender these qualities in the teams
- Demonstrate recognition of the different cultural and behavioural aspects of dealing with a multinational/multilingual work force, and acting accordingly
22
Plant Technician Mechanical Resume Examples & Samples
- Demonstrates knowledge of plant system functions including maintenance work practices and divisional safe work practices
- Operate company vehicles and equipment
- Performs administrative functions in support of work unit such as timekeeping, materials support, cost monitoring, scheduling and quality control/quality assurance
- Perform general housekeeping functions, as necessary
- Use various hand/power driven and hydraulic tools and machinery
- Perform root cause analysis, recommend and implement improvements to power plant equipment, processes, systems, and procedures. Inspect and furnish recommendations and estimates of repair within area of technical expertise
- Collaborate with personnel in own and other organizations to resolve problems and recommend solutions based on highest level of technical expertise
- Lead, train, and direct others in the performance of the work
- Associates or Technical Degree in a related science
- Previous generating plant maintenance experience
- Work rotating shift work, holiday and weekend work in addition to overtime
- Use and maintain tools and equipment
- Interpret and apply instructions, specification, blueprints, and procedures
- Possess valid jurisdictional drivers permit
- Ability to perform both indoor and outdoor tasks requiring continuous physical activity, sometimes of a strenuous and stressful nature
- Ability to work in enclosed vessels or confined spaces
- Possess the appropriate body coordination to do the following for extended periods of time: climb ladders, bending, twisting, kneeling, crawling, pulling/pushing, lift up to 50 pounds, standing, walking, and squatting
- Work on or around energized electrical equipment
- Work at elevated heights including scaffolding
- Ability to work alone in remote areas
- Ability to work in dark areas or areas with limited lighting
- Work in ambient temperatures ranging from very cold to very hot
- Work in areas that may be noisy and dirty
- Possess good hearing and vision
- Ability to wear a respirator and other job related PPE (personal protective equipment)
- Ability to meet on an annual basis, appropriate physical evaluations identified by Health and Safety as prerequisite requirements to performing certain tasks and training activities
23
Technician, Mechanical Resume Examples & Samples
- Assemble, repair, rework and/or troubleshoot complex electromechanical assemblies
- Maintenance of system file and tracking assembly documents
- Afternoon shift work required
- Familiarity with reading and understanding technical drawings and schematics
- Excellent manual dexterity
- Strong interpersonal and communication skills, and the ability to work within a team environment
- 3 - 5 years experience in the Mechanical and Electronics field
- Previous experience working in ISO9000, MIL-STD, AS 9100 environment
- Experience with Lean Manufacturing an asset
- Community College Diploma in Mechanical/Electrical technology or equivalent
24
Automation Engineering Technician, Mechanical Resume Examples & Samples
- Responsible for the Mechanical assembly of complex automation equipment using fabricated and purchased parts as well as bill of material provided by engineering
- Documentation of mechanical alterations and additions during the build and debug
- Work with the automation and controls engineers to ensure proper machine functionality
- Perform various non-repetitive mechanical assembly functions using hand or power tools
- Build machines and sub-assemblies according to design requirements and specifications
- Comply with the company safety procedures
- Provide timely and detailed status updates
- Quality - Ensure standards are maintained in a highly regulated environment
- Provide support to manufacturing
- Participate in continuous improvement discussions and provide ideas and feedback
- Perform buy-off on outsourced tools
- Associate Degree
- SolidWorks knowledge
- Basic knowledge of electrical schematics and wiring diagrams
25
Technician Mechanical Resume Examples & Samples
- Forklift License
- Confined Space - Desirable
- Strong heavy vehicle mechanical fitting maintenance competency, with sound diagnostic abilities
- Strong computer skills – using Microsoft Office suite, SAP, Excel
- Ability to work of schematic drawings
- Competent with systems such as SIS & VIMS
- 2 years' experience in a relevant or equivalent role, with experience in a large scale mining operation is preferential
- Exposure to FIFO or shift work
26
Engineering Technician Mechanical Resume Examples & Samples
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA) and requires additional education, training and experience. This position has been identified as a Career Field Facilities Engineering at Level I. If you possess DAWIA Certification, please indicate your Certification Level and Career Field information in your resume
- Selectee will be required to complete and submit a Confidential Financial Disclosure Report, OGE-450, prior to entering the position and annually thereafter
- Must be able to obtain an interim and/or final secret security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal
- Selectee must obtain and maintain a current valid United States driver's license
- The job often requires irregular hours, including overtime and recall
- Work is performed in office environment with frequent job site visits, which takes place in all weather conditions
- Selectee will be exposed to dust, fumes, and noise
- The work requires frequent standing, walking, crawling, and climbing in industrial facilities where bending, crouching, stooping, reaching, and lifting heavy items are necessary
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326
- Salary will be increased by the applicable cost-of-living allowance (COLA), which is subject to change without notice
- Knowledge of Mechanical Engineering Technician principles and practices
- Technical Support
27
Machine Repair Technician, Mechanical Resume Examples & Samples
- Mentors newer technicians on principles of operation and diagnostic techniques for production machinery and/or test equipment
- Assembles new or modified mechanical components or assemblies for equipment such as production machinery, production or development test equipment and support systems
- Diagnoses and correctsthe most challengingproblems in production machinery and/or test equipment
- Devises solutions to complex problems including fabrication of parts, system modifications to provide additional functionality and performs analysis on existing systems to determine process capability
- Instructs newer technicians in the proper methods of preventive maintenance on mechanical systems
- Coordinates and participates in installation of equipment in test fixtures, connecting valves, pumps, hydraulic, mechanical controls, and instrumentation
- Analyzes more advancedtest results in relation to design or rated specification and test objectives; modifies or adjusts equipment to meet specifications
- Examines parts for conformance to system or component specifications using precision measuring instruments; performs precision alignment of machinery and balancing of rotating components
- Advanced ability to read and understand mechanical drawings and assembly drawings for mechanical systems or machinery
- Has athorough understanding of the physical principles used in mechanical, hydraulic and pneumatic systems
- Understands applications of industrial electrical distribution, motor control circuits and is able to resolve moderately complex electrical problems with little or no assistance
- Ability to effectively teach troubleshooting skills to less experienced technicians
- Advanced ability to read mechanical drawings and hydraulic schematics
- Advanced ability to read and use a wide range of precision mechanical measurement devices
- Windows PC skills; fully functional experience using spreadsheet, word processing and WISE screens
- Ability to learn and apply new concepts/techniques to work environment
- Has moderate electrical ability and can resolve problems with distribution equipment, motor controls and interlock circuits
- With associates degree (above), 4 years minimum mechanical experience in an industrial environment preferred; otherwise 7 years mechanical experience in an industrial environment preferred
28
Technician Mechanical Maintenance Resume Examples & Samples
- Comply to and consistently follow the standards and procedures designed to enable you to work safely and effectively every day
- Provide mechanical trade skills to perform unplanned and/or breakdown maintenance
- Assist with planned maintenance work where applicable
29
Senior Technician, Mechanical Resume Examples & Samples
- Perform site installation and maintenance in conjunction with engineering staff
- Use of basic hand tools, inspection and layout tools and equipment
- Ability to work to engineering drawings and schematics for equipment layout and assembly
- Improve product documentation including updating and review of test and operation procedures. Records test procedures and results, performs routine analysis and calculations, and makes recommendations for changes in equipment, product or test method
- Organization and maintaining test site area; responsibilities include material storage and organization, maintain parts inventory and stock; equipment inspection and repair
- Additional items as necessary
30
Technician, Mechanical Resume Examples & Samples
- Must be able to work in process plants or out on remote field units and associated components
- A minimum of a High School Diploma or G.E.D. equivalent is required
- A minimum of 3+ year's mechanical experience is required
- A minimum of 5+ year's gas-fired, engine-driven compressor experience is preferred
- Self-motivated with ability to work alone or be a contributing team member
31
Technician Mechanical Shop Resume Examples & Samples
- Perform standard repairs on customer's equipment
- Replace parts and equipment as necessary
- Provide assistance to more senior level Shop Technicians on larger jobs
- Perform all work in accordance with established quality standards and safety procedures
- Ability to take care of the customers' needs while following company procedures
32
Technician Mechanical Field Service Resume Examples & Samples
- Accurately troubleshoot and diagnose all problems with customer's equipment
- Identify and order parts necessary to complete repairs and routine maintenance
- Perform complex and/or major repairs on customer's equipment. Replace parts and equipment as necessary
- Perform routine maintenance on equipment according to established guidelines and schedules
- Complete all work orders and time sheets in a legible, accurate and timely manner
- Assist lower level Field Service Technicians in completing work assignments as necessary
- The trait of being dependable and trustworthy
- Ability to utilize the available time to organize and complete work within given deadlines
33
Technician, Mechanical Trainee Resume Examples & Samples
- Work side-by-side with a mentor to undergo training for a period of time, which is normally 9-24 months, in preparation for a future Mechanical Technician position
- Participate in a variety of training courses including computer-based and instructor led training
- Receive on-the-job training which will address troubleshooting, testing, maintaining, installing, repairing, and operating equipment associated with gas compression and the pipeline industry
- Participate and successfully complete all assigned training programs
- Participate in required safety meetings and comply with established safety policies and procedures
- Ability to optimize work to affect a minimal amount of overtime
- Perform remedial and preventative maintenance and maintain safety through good housekeeping practices inside and outside of the facilities
- A high school degree or G.E.D. equivalent is required
- A vocational – technical certification or an Associate’s degree in Electronics or related field is required
- A minimum of 6 months to 1 year mechanic experience in a related field is preferred
- Basic computer skills such as: opening, creating and updating content in Microsoft Word documents and Excel spreadsheets is required
- The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a businesslike and professional manner is required
- Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., and apply up to 100 foot pounds of torque
- The ability to take call-outs and work overtime is required
34
Technician, Mechanical Resume Examples & Samples
- Assembly of tools
- Determines cell layout in advance of delivered equipment
- Assembles all equipment used to operate the cell
- Conducts plumbing for spot weld cells and erects safety panels for laser welders
- Assembles and positions all electrical control pallets for electrical control panels and welders, mig cells and spot-weld cells
- Locates and positions all light curtains for safety compliance
- Monitors daily technical and/or mechanical activities and maintains effective preventive maintenance system
- Maintains quality and plant safety requirements
- Completes assigned work efficiently and per Standard Operating Procedures (SOPs)
- Disassembles, repairs, and reassembles equipment such as gearboxes, pumps and mechanical drive trains
- Interprets blueprints, schematics, data trending and equipment manuals
- Troubleshoots and corrects mechanical problems in a fast-paced environment and conveys information to engineers to update or redesign equipment
- Works in a team or as an autonomous group performing work orders and providing technical support
- Performs technical analysis to prepare recommendations for future action
- Plans, schedules and records all maintenance activities, repairs and ensures all required materials and/or parts are available, prepared and organized as necessary to optimize manufacturing operations
- Organizes and maintains lubricants required for production and ancillary equipment
- Tracks, develops and leads all mechanical maintenance work
- Loads and unloads equipment with ability to rig and estimate weights
- Confers with team leads to identify potential problems and work through to resolution
- Travels to customer locations to reassemble cells
- Performs mechanical rebuilds as required
- Estimates time required to complete the required tasks
- Coordinates work with customer contacts to verify drop locations, hot work permits and other off-site requirements
- 3 years experience in a manufacturing environment including preventative maintenance experience
- Experience with robotic equipment is a plus
- Hands-on experience required
- Must be able to read detailed blueprints
- Must be qualified forklift operator
- Must be able to work at heights (boom trucks, etc.)
- Must be knowledgeable of OSHA codes and requirements
- Needs awareness of safety and proper lifting and transporting heavy and oversize loads
- Need to have an awareness of automated equipment and its inherent dangers
- Needs to be proactive in continuous improvement methods
- Millwright skills required to properly rig loads and determine safe ways to move equipment
- Knowledge of mechanics, pneumatics, hydraulics and electricity
- A basic understanding of fabrication skills such as welding, cutting, grinding and machine work
- An ability/desire to maintain orderliness and cleanliness in the maintenance of equipment
- Ability to follow directions and ensure a safe and high quality product and production environment
- Have good verbal and written communication skills
- Willing to travel to other customer sites
- Concern for safety on project of crew and others
35
Technician Mechanical Shop Resume Examples & Samples
- Accurately troubleshoot and diagnose routine problems with customer's equipment
- Perform routine repairs on customer's equipment. Replace parts and equipment as necessary
- Perform preventative maintenance on equipment according to established guidelines and schedules
- Consult with supervisor to ensure accuracy of diagnosis and approval for repair work
36
Technician Mechanical Field Service Resume Examples & Samples
- Accurately troubleshoot and diagnose standard problems with customer's equipment
- Perform standard repairs on customer's equipment. Replace parts and equipment as necessary
- Provide assistance to more senior level Field Service Technicians on larger jobs
37
Engineering Technician Mechanical Resume Examples & Samples
- Engineering qualification at Trade
- Minimum 3-5 years relevant experience working as a boiler maker welder
- Previous exposure to the mining and minerals processing industries
- 3G & 4G Welding Qualifications along with EWP, FL, DG tickets will be advantageous
- High skill level in 1SAP Work Management Processes and Microsoft Office Word
38
Maintenance Technician Mechanical Resume Examples & Samples
- Promotes the importance of Data and Service Quality and flawless job execution within the maintenance community
- Keeps current with new equipment and technology and updated maintenance methods
- Understands and complies with Schlumberger’s rules and regulations
- Assists in the development and coaching of less senior Technicians
- Assists the other team members with the maintenance sections of their training program and liaises, where required with Field Operations Personnel
- Ensures all assigned equipment is continually maintained at shop with highest standards, resulting in proper functionality and minimum failures
- Performs equipment repair and modification in a competent complete manner in accordance with documented procedures and workmanship standards
- Efficiently troubleshoots and repairs assigned equipment
- Participates in Root Cause Analysis of failures
- Records all maintenance and failure events immediately and accurately using the most up to date Computerized Maintenance Management System
- Makes recommendations to supervisors on requirements for spare parts, test equipment and tools necessary for efficient maintenance
- Understands and helps drive the World Wide Service Quality Plan within the location
- Successfully graduated with a 3 years Technical degree
- Minimum 3 years experience as a Maintenance Technician, preferably in Oil & Gas
39
Machine Repair Technician Mechanical Resume Examples & Samples
- Diagnoses and correctsmost malfunctions in production machinery and test equipment
- Performs routine preventive maintenance on mechanical, hydraulic and pneumatic systems and documents completion of these tasks in an electronic database
- Documents mechanical or electrical problems and utilizes internal and external resources to find solutions to those problems
- Examines parts for conformance to system or component specifications using precision measuring instruments such as micrometers, dial indicators
- Solid ability to read and understand mechanical drawings and assembly drawings for mechanical systems or machinery
- Has a solid understanding of the physical principles used in mechanical, hydraulic and pneumatic systems
- Understands basic electrical distribution and is able to resolve minor electrical problems with little or no assistance
- Solid ability to read mechanical drawings and hydraulic schematics
- Solid ability to read and use a wide range of precision mechanical measurement devices
- Windows PC skills with some functional experience using spreadsheet, word processing and WISE screens
- Ability to work in a team atmosphere with emphasis on customer service
- Has basic electrical ability and can resolve problems with distribution equipment, motor controls and interlock circuits
- Exhibits desire for challenging work
- 3 years mechanical experience in an industrial environment preferred
- Post high school training in the above areas may be substituted for 1 year of experience
40
Maintenance Technician Mechanical Resume Examples & Samples
- Performs advanced preventative maintenance on all machinery as assigned
- Makes advanced repairs and adjustments to mechanical and electrical devices
- Successfully troubleshoots mechanical and electrical problems
- May perform basic machining duties
- Completes welding and fabrication tasks with little direction
- Accountable for entering data into maintenance system timely and accurately
- Initiates and installs improvement projects
- Performs basic failure root cause investigation
- Modifies PLC and HMI programming
- Minimum of a High School diploma or GED
- May Require CPR and First Aid training
- Lockout/tagout, fall protection, PPE, confined spaced training
- WI electrical safety training
- Complete knowledge of Standard Operating Procedures
41
Engineering Technician Mechanical Resume Examples & Samples
- Trades Certificate in Mechanical discipline
- Experience in heavy fixed plant
- Experience with an automated plant control system
- Experience troubleshooting hydraulic & pneumatic systems
- Experience with fixed plant pumping and water recovery systems
- Mining industry experience is desirable
- Good analytical skills for a high level of problem solving and sharing of solutions within the department
- Ability to plan and organise to complete a task
- Ability to work within a team to achieve outcomes
- HR, MSIC, EWP, Forklift, Dogging and Rigging Certificates (Desirable)
42
Propeller Technician Mechanical Resume Examples & Samples
- Perform on-site Propeller systems maintenance inclusive of repairs, modification installation and preventative maintenance
- Provide technical instruction and assistance to customers within the parameters of formal technical documents
- Provide ‘On the Job Training’ to customers in accordance with technical publications
- Maintain knowledge of applicable product line and aftermarket contractual obligations
- Train and oversee apprentices and less experienced team members
- Perform administrative functions; such as writing technical reports, ordering materials, supporting quotations and capturing sales and cost avoidance opportunities
- Develop and maintain knowledge of, and adhere to, the Site Quality, Safety Management and EH&S policies and other compliance requirements. Bring forward for resolution any identified risks utilising provided systems
- Maintain strong International Trade compliance regulations aligned to GE requirements
- Provide customer insight / intelligence as necessary
- Provide all customers (internal and external) timely and accurate responses to queries covering all relevant GE Systems products
- Utilize provided tools to track and maintain customer queries to closure
- Provide ‘Hands On’ technical assistance to GE manufacturing and repair facilities to support output requirements
- Other duties as and when required
- Certificate IV in Aeroskills – Mechanical/Avionics or equivalent
- Knowledge of, and/or experience in the maintenance and repair of propellers in both a workshop and field environment
- A track record of delivering high level customer service
- Well-developed interpersonal and communication skills including the ability train people and prepare technical reports
- A commitment to a healthy, safe and compliant work environment
43
Engineering Technician Mechanical Resume Examples & Samples
- Previous experience with Atlas Copco PV271 and D65 is desirable
- Previous experience with Liebherr excavators is required
- EWP, Working at Heights, CV (Hiab), CN (Non Slewing Crane), Dogman
- Strong heavy vehicle mechanical fitting maintenance competency, with sound diagnostic abilities and schematic drawings
- Exposure to asset management principles in particular overall equipment effectiveness
