Technician Level Resume Samples

4.8 (97 votes) for Technician Level Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the technician level job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
MG
M Grant
Maurice
Grant
6173 Orlando Trail
New York
NY
+1 (555) 190 7456
6173 Orlando Trail
New York
NY
Phone
p +1 (555) 190 7456
Experience Experience
Houston, TX
Technician Level
Houston, TX
Ernser, Hettinger and Ortiz
Houston, TX
Technician Level
  • Provide training, assistance, and mentoring of fellow coworkers
  • Drive operational best practices based on ITIL (incident management, change management, configuration management)
  • Develop and maintain all specifications for NDT, including the development and maintenance of all NDT technical procedures, forms and supporting documentation
  • Maintain a solid working relationship with multiple infrastructure and development teams
  • Foster teamwork and improved communications between sectors at all times
  • Perform patching and scripted or manual configurations on production and development environments
  • Establish and track key performance indicators
Dallas, TX
Engineering Technician Level
Dallas, TX
Schaden-Greenfelder
Dallas, TX
Engineering Technician Level
  • Perform circuit / product testing, evaluating performance per specification and providing expert insight as to other observed phenomena
  • Determines and/or follows methods and sequence of operations in performing wiring, component installation and harnessing on assembly units
  • Assist in solving customer problems, operating in concert with the assigned engineer
  • Works from blueprints, process sheets, and sketches to perform production tasks, which may include the cutting and shaping of metal to precision dimensions
  • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
  • Utilizes computers for the purpose of collecting data and transferring files
  • Compose well written, legible, and accurate notes of experiments, including a summary on interpreting test results and recommendations
present
Chicago, IL
Maintenance Technician Level
Chicago, IL
Gislason-Purdy
present
Chicago, IL
Maintenance Technician Level
present
  • Completes Work Orders, PM Sheets, Logs, and other written or computer-based documents according to established procedures
  • Accurately completing CMMS work order documentation for complete work history and parts inventory tracking
  • Submit and assist with the resolution of C.P.S. Continuous Improvement cards
  • Working with other Level III Maintenance Technician(s) to perform preventive, corrective, and predictive maintenance on high tech automated equipment
  • Auditing Level I Maintenance Technician work for consistency and correctness
  • Troubleshoot Controlnet, Devicenet, DH+, Remote IO and Ethernet networks
  • Perform PLC and control system troubleshooting and repair
Education Education
Associate’s Degree in Electronic
Associate’s Degree in Electronic
Loyola Marymount University
Associate’s Degree in Electronic
Skills Skills
  • Ability to instruct and train other employees, mechanical aptitude, ability to read blueprints, knowledge of electrical, hydraulic and pneumatic principles
  • Ability to handle numerous complex details of the job, and handle distractions. Mathematical skills to perform in­ process calculations
  • Knowledge, Skills & Ability
  • Experience in other highly regulated industries is also desirable
  • Ability to read and write
  • Develop personal professional and technical skills on an on going basis
  • Proactively acquire and expand knowledge of the latest technology and systems in the industry
  • Be proficient in electronic media and laptop use
  • Ability to look up parts efficiently and independently
  • Experience in instrumentation, detection and control devices, solid state electronics, computer mathematics, digital and analog logic and robotics
Create a Resume in Minutes

15 Technician Level resume templates

1

Dcops Technician Level Resume Examples & Samples

  • Operating systems management to include Microsoft Windows Server, Red Hat Enterprise Linux, Ubuntu Linux and VMware ESX Server
  • Troubleshoot local area network (LAN) connectivity issues within customer configurations
  • Complete customer configuration installations; including hardware modification, operating system installation, mounting of devices within cabinets and completion of all required cabling
  • · Troubleshoot copper and fiber cabling to resolve connectivity issues
  • Execute and maintain meticulous 5S and housekeeping practices o Demonstrate no less than full performance in a continuous, consistent, measurable manner o Demonstrate high levels of passion and enthusiasm when providing Fanatical Support to all customers and coworkers o Communicate in an honest, transparent manner focused on building trust amongst customers and coworkers
  • Customer configurations are provisioned and installed prior to the specified delivery date
  • Attention to detail and adherence to build instructions ensure customer configuration rework is not required
  • · Troubleshooting and problem solving capabilities lead to accurate and timely resolution of technical
  • All production and provisioning activities are quality controlled and adhere to published policy and process to ensure Global alignment
  • All customer interactions, both internal and external, are conducted in a manner that delights customers
  • Process and policy sign off is conducted in a timely manner, with clear understanding of the subject matter, by the specified due date
2

NDI Technician Level Resume Examples & Samples

  • The Aircraft Mechanic/NDI Level II must possess superior qualities of personal integrity, maturity, judgment and aptitude that facilitates the accomplishment of assigned work functions and cultivation of a quality work environment. Must be able to read and write the English language. Must be capable of effectively communicating both verbally and in writing
  • Must be capable of providing training in your specialty/qualification/certifications to other employees
  • Will be required to perform a variety of “critical maintenance tasks” applicable to your specialty/qualification/certifications such as but not limited to
  • Be capable of obtaining and maintaining all qualifications/certifications related to your classification specialty
  • Be capable of obtaining and maintaining Support Equipment (SE) Licensing for required equipment
  • Use schematic drawings, diagrams and charts to trace and analyze systems. Required to read and interpret
  • Will be required to document work performed on appropriate/applicable records
  • Will be required and capable of being certified to set up a variety of “in shop” and hangar peculiar test equipment, common and special tool/equipment and measuring devices required to correctly diagnosis aircraft system repair procedures
  • Responsible for the proper use and operation of all Personal Protective Equipment (PPE)
  • Familiar and knowledgeable in the application of requisitioning and turn-in of required components, and the proper packaging of components prior to turn-in
  • Perform other duties and Collateral Duty assignments as assigned and directed by management
3

Technician Level Resume Examples & Samples

  • Drive operational best practices based on ITIL (incident management, change management, configuration management)
  • Work closely with Engineering and project teams to deploy new solutions and technologies and ensure solutions are operationally ready
  • Experience with Solaris 9&10 and/or RedHat 5.x-6.x
  • Experience managing alerts using a monitoring tool (for example: xymon, BigBrother, Oracle Enterprise Manager Grid 11+)
  • Demonstrated technical documentation experience
  • Commitment to quality, customer service and team environment
  • Ability to effectively build relationships with customers, peers and leadership
  • Proficiency with MS Office suite
  • Clear and effective written and verbal communication and strong interpersonal skills
4

Maintenance Technician Level Resume Examples & Samples

  • Responding to operational calls for troubleshooting/diagnosing problems with assembly systems and equipment
  • Coordinating with other Level III Technician(s) and maintenance management to facilitate the professional development of Level I Maintenance Technicians by providing on-the-job training opportunities and mentoring
  • A minimum of four years of work experience in maintaining, troubleshooting, and repairing Industrial electrical / electronic production and material-handling equipment
  • Abides by OSHA regulations
  • Mechanical knowledge of basic machines (pulleys, levers, etc.), pneumatics, hydraulics, gears, reducers, bearings, lubrication theory, drive components (sheaves, sprockets, chain belts, take-ups), and equipment alignment
  • Willing to train less experienced technicians
  • Must be willing and able to climb to levels above the shop floor, or use a man-lift, as needed to make repairs
  • Position requires repetitive bending, crouching, kneeling, reaching, twisting, sitting, standing, and walking. Must be able to lift parts and tools weighing 20 pounds, on average, and occasionally weighing up to 80 pounds
  • Good organization skills
5

Maintenance Technician Level Resume Examples & Samples

  • Interpret machine manuals, schematics and engineering drawings relative to equipment assigned
  • Basic knowledge of plant, fire and water sprinkler systems and their controls
  • Maintain area, tools and equipment in a clean, safe and proper manner
  • Operate material handling equipment as required
  • Detect faulty and defective machine functions, repairing or reporting them
  • Complete all mandatory training to highest level of one's ability
  • Utilize the self-help program to better one's self on the job
  • Must be flexible to work any shift (1st, 2nd and 3rd shift)
  • Must be available to work weekends, holidays and overtime as scheduled
  • Must possess a minimum of 3 years of electrician experience
  • Understand the theory of electricity
  • Demonstrated ability to use electrical testing equipment including
  • Food manufacturing experience is highly desirable
  • Experience with Safe Quality Food (SQF) practices is desirable
  • Experience with Continuous Improvement methodology is beneficial
6

Tech, H&V TAB Technician Level Resume Examples & Samples

  • Provides the H&V team with accurate, documented, and repeatable measurements of the H&V system performance including the following system functions
  • Glycol heating system flows, inlet and outlet temps and pressures
  • Documents non-functioning system components and recommends repair/replacement options
  • Provides recommendations on system flow modifications
  • Tests performance of air and hydronic systems, using specialized tools and test equipment to isolate problems and determine where adjustments are necessary
  • Supports planning for identified projects
  • Completes Preventative Maintenance (PM) system inspections
  • Provides technical support to rapidly and thoroughly resolve issues with H&V systems
  • Makes recommendations for potential service enhancements or modifications to meet the ever-changing needs of the customer base
  • Communicates clearly with customers, contractors, subcontractors, and fellow employees
  • Works within and adheres to all Work Management and Control of Work standards as required
  • Independently performs required duties
  • Lift 40 lbs. from floor to knuckles with one hand x 2 with a 12 second interval
  • Lift 40 lbs. from floor to waist x 2 with a 12 second interval Lift 40 lbs. from floor to shoulders x 2 with a 12 second interval Lift 40 lbs. from floor to crown x 2 with a 12 second interval Carry 40 lbs. with two hands for 40 feet x 6 (Allow a 60 second rest break after each carry)
  • Push horizontally at waist level – 100 lbs. peak isometric force (not sustained)
  • Six (6) years of HVAC system balancing expertise including experience in cold climate work required
  • Five (5) years pneumatic & electronic controls expertise to a level of being able to manipulate controls for system balancing required
  • Experience understanding the original system design intent of H&V systems and making qualified recommendations for system modifications required to improve system performance required
  • Experience with internal components of standard heating and ventilating equipment such as: electric convectors, electric unit heaters, electric duct heaters (modulating and non­modulating), etc. required
  • Valid driver’s license and ability to be insured by CH2MHILL’s auto insurer required
  • Possess a current National or State Refrigeration License required
7

Engineering Technician, Level Resume Examples & Samples

  • 35% - Performs routine tests, collects data, operates equipment in accordance with standard procedures. Demonstrates proficiency in following detailed work standards and following safety protocols. Demonstrates proficiency in acquiring skills and performing work with specialization as required
  • 35% - Conducts laboratory procedures for chemical analysis with wet chemical techniques or analytical instruments. Other procedures include performing mechanical testing, environmental exposure, combustion testing, hazard testing and propellant compatibility testing to evaluate the suitability of materials for specific product or process applications
  • 30% - Applies results for quality control purposes, process or product failure analysis or other forensic purposes, contamination analysis or for the understanding of results from engineering development activities
  • Lab equipment necessary to perform the essential functions of the job
  • Applicable Engineering standards; military, commercial and company
  • Applicable skills to perform the functions of the position within the assigned area
  • Data collection skills and analysis with particular attention to detail
  • Communication, verbal and written skills
  • Proper use of Personal Protective Equipment (PPE)
  • Laboratory hygiene and other safety protocols
8

Tmas-engineering Technician Level Resume Examples & Samples

  • Assist in the development of system requirements, functional capabilities, performance measures, design constraints, test phase entry/exit criteria, and metrics
  • Design and employ test automation tools and utilities supporting test execution
  • Support development test (DT), operational test (OT), force development evaluation (FDE), and certification for test readiness by identifying deficiencies, verifying compliance with specifications and standards, and demonstrating a stable system configuration
  • Support the development of strategic test documents such as Test and Evaluation Master Plan (TEMP), test strategies, Integrated Test Team (ITT) Charters, Test Scenario Plans, and Modeling and Simulation Development Plans
  • Prepare, execute, review, and analyze test plans, procedures, metrics, and reports throughout the software development life cycle. Develop and write methods of tests, test cases, test cards/procedures, test directives, technical or letter reports, test objectives, analysis and review of requirements, and any other test process documents as required in the conduct of testing
  • Plan, coordinate, and monitor test projects that frequently require significant modification of standard practices or adaptation of instrumentation to obtain valid results. Plan, monitor and evaluate tests, and assess the feasibility and soundness of proposed engineering evaluation tests. Make recommendations and commitments on the conventional aspects of the testing assignments
  • Coordinate schedules, pre-and post-test activities, and test results
  • Travel to TDY locations to execute test procedures, data management, data reduction, data analysis, configuration management, hardware setup, hardware troubleshooting; and deficiency reporting, deficiency evaluation and recommendations, and official test reports
  • Conduct command and control (C2) system testing, validation and verification testing, and modeling and simulation testing at locations to include but not limited to Eglin AFB, FL; Robins AFB, GA; Columbia, MD; Reston, VA; Cheyenne AFS, CO; worldwide sites and other TDY locations as directed
  • Travel to required meetings and events (e.g.; Program Management Reviews (PMR), Technical Interchange Meeting (TIM), Engineering Design Reviews, test planning, test execution, fielding and other enterprise/program meetings) within CONUS and OCONUS
  • Work extended hours including weekends and holidays when required to meet mission requirements
  • Master of Science degree in an applicable discipline and over 10 years of relevant technical experience in the field of C2 operations; or Ph.D. in an applicable discipline and over 8 years of relevant technical experience; or a Bachelor’s degree in an applicable discipline and over 16 years of relevant technical experience. Twenty years of relevant technical experience will also qualify in lieu of a degree
  • Relevant technical experience in the areas related to: air operations support, or Command, Control, Communications, Computers, and Intelligence (C4I), or military air operations, or similar experience in command and control, communications infrastructure
  • Active SECRET security Clearance required with an investigation date within the last five years
  • Experience on DOD C4ISR weapon system acquisition, systems engineering, and test engineering
  • Must have the ability to interface with prime weapons system contractors regarding test objectives, schedules, budgets, and methods of test
  • Must be qualified and capable of traveling up to 30% of time to contractors' facilities, test sites, and other locations (OCONUS and CONUS)
  • Must possess effective oral and written communications skills
  • Good interpersonal communications skills and be comfortable leading and working in a team environment
  • Proficiency in the use and integration of MS Office applications required
  • Understanding of development test and evaluation processes, specifically - acquisition program development and detailed knowledge of Air Force C2 test methodologies including AFI 99-103
  • Experience with DOD intelligence dissemination systems (e.g.; IBS-NS, IBS-I, IBS-S, NRTI, TIBS, TDDS, TRAP, TRIXS)
  • Experience with DOD Common Message Format (CMF)
  • Experience with family of Joint Tactical Terminal (JTT) radios
  • Experience with DOD modeling and simulation tools
  • Experience working with USAF, Army, Navy IBS-NS users
  • Experience working with Joint Interoperability Test Command (JITC)
  • Knowledgeable with the software and system development lifecycle, network services, and architecture, configuration, and security methods
  • Knowledge of systems analysis and application software concepts, functions, techniques, and capabilities sufficient enough to evaluate emerging technologies in a development environment
  • Ability to teach others
9

Tmas-engineering Technician Level Resume Examples & Samples

  • Plans, coordinates, and monitors test projects that frequently require significant modification of standard practices or adaptation of instrumentation to obtain valid results. Plans, monitors and evaluates tests, and assesses the feasibility and soundness of proposed engineering evaluation tests. Makes recommendations and commitments on the conventional aspects of the testing assignments
  • Demonstrates software experience in one or more of the following environments: Windows 7, Windows 8, Windows10, and UNIX
  • Demonstrates aviation or mission planning experience with functions provided by the software including operational use of comparable systems. Maintains a working knowledge and understanding of Technical Orders and aircraft performance charts
  • Maintains a working knowledge of the software or class of software being tested, to include experience with the existing software, previous versions, or any associated software used in conjunction with the software being tested. Ability to conduct mission planning using JMPS and PFPS is highly desirable
  • Demonstrates thorough knowledge of and extended experience and training in the problem domain of the software being tested including extensive general experience as an aircrew member accomplishing manual mission planning procedures and techniques
  • Maintains testing/test methodology experience, including testing of software/hardware, such as unit, integration, system, or acceptance testing, and familiarity with Air Force directives and CMMI processes and procedures
  • Demonstrates familiarity with specialized testing tools (i.e. Mercury Quality Center, etc). A working knowledge of Flight Performance Model (FPM) testing tools (Reg Tool, WinDrop, Test Case Generator, Test Chart, Test Suite, etc) highly desired
  • Maintains experience in the operational testing of any research, development, or test and evaluation software associated with aircraft, weapons, range instrumentation, or other computer systems
  • Maintains experience in the use of automated mission planning software
  • Master of Science degree in an applicable technical degree and over 10 years of experience in the field of mission planning/military aviation or related technical experience; or Ph.D. in an applicable technical degree and over 8 years of experience in the field of mission planning/military aviation or related technical experience; or a Bachelor’s degree in an applicable technical degree, and over 16 years of experience in the field of mission planning/military aviation or related technical experience. Twenty years of experience in the field of mission planning/military aviation or related technical experience will also qualify in lieu of a degree
  • Active TOP SECRET security Clearance required with an investigation date within the last five years
  • Must be qualified and able to travel to worldwide sites as required
  • Must be able to travel to required meetings (such as Engineering Design Reviews, Formal Qualification Tests, and other enterprise/program meetings) CONUS and OCONUS
  • Must be willing to work extended hours including weekends and holidays when required to meet mission requirements
  • Must have a demonstrated ability to work effectively on a team and to lead and direct the work of others
  • Must be able to communicate effectively both orally and in writing including communication skills in areas of technical writing, briefings, and formal presentations
  • Prior FPM develop/testing experience
  • Proficiency in the use and integration of Microsoft Office applications
10

Bio-technician Level Resume Examples & Samples

  • Performs manual and automated operations, general maintenance and support functions necessary for the production of vaccines
  • Performs sampling/ in process testing supporting the manufacturing nd validation processes
  • Maintains, cleans and prepares equipment used in vaccine production
  • Performs all work duties via automated systems or manaual operations in compliance with safe operating procedures, company and government regulations, and good manufacturing practices
  • Ability to follow oral and written instructions, maintain neat, accurate and current records
  • Ability to perform aseptic/sterile operations
  • Must have a Mechanical aptitude
  • Ability to analyze equipment and take corrective action
  • Must be willing to work off shifts
  • Ability to perform all work duties via automated systems or manual operations in compliance with safe operating procedures, company and government regulations, and good manufacturing practices
  • Ability to work within teams
11

Technician Level Resume Examples & Samples

  • Respect and care for the customer and their equipment
  • Knowledge, Skills & Ability
  • Fill in for team leader when needed
  • Be proficient in electronic media and laptop use
  • Education & Experience
  • Possess comprehensive set of tools requires to perform function of a level 3 technician
  • Lifting heavy objects
  • Standing long periods of time
  • Exposure to extreme weather variances
  • EPA certifications for the safe handling of refrigerant
12

Maintenance Technician Level Resume Examples & Samples

  • Responsible for the equipment maintenance
  • Perform facility infrastructure maintenance (e.g., heating, air conditioning, ventilation systems, electrical power distribution, and gas distribution subsystems)
  • Master's degree or a Bachelor's degree with 10 years of directly relatable experience in the discipline
  • 5 years of experience working in the Intelligence Community (IC) environment
  • Current trade-specific license (e.g., electrician)
  • Currently have an active DoD Secret security clearance
13

Technician Level Resume Examples & Samples

  • High School diploma or equivalent combination of training and education
  • A minimum of 4 years related maintenance experience in a similar environment
  • Availability an willingness to work rotating schedules
  • Able to work with minimum supervision
  • Attention to détails
  • Able to obtain a security clearance at the required level
  • Asset: Associate degree or college diploma
14

RS Technician, Level Resume Examples & Samples

  • Set up, operate, maintain and troubleshoot Refueling and Fuel Services field service equipment at customer sites, including but not limited to, cleaning processes, non‐destructive examination (NDE) technology, robotic systems and computer networks
  • Develop, promote and exercise team‐building skills with peers, supervisors, contactors, customers and other departments
  • Demonstrate good customer sensitivity and customer service skills
  • Ability to travel to in US and overseas up to 70%
  • Must relocate to Madison, PA for position
  • Professional training in refueling nuclear facilities
  • 6-7 years of experience supporting refueling outages
15

NDE Technician Level Resume Examples & Samples

  • Act in the capacity of a resource lead to support project preparation for field deployment
  • Provide technical training to less experienced personnel in either a classroom or mock- up/hands-on environment
  • Participate in performance-based training programs to acquire and maintain certifications as well as keep current with technology
  • Participate in safety training to acquire the skills and knowledge to perform work in hazardous environments and operate safety equipment and systems
  • Set up, operate, maintain and troubleshoot field service equipment at customer sites, including but not limited to, cleaning processes, non-destructive examination (NDE) technology, robotic systems and computer networks
  • Perform all assigned tasks under minimal supervision, with a high degree of quality, and within the parameters of qualified procedures and guidelines. Maintain a high level of attention to detail, and document all quality related issues
  • High school graduate or the recognized equivalent. Post high school degree/certificate or equivalent in experience preferred
  • NDE Level I, II or III preferred
  • Nuclear Experience Preferred
16

EUC Technician Level Resume Examples & Samples

  • You will support our clients with the maintenance of their computer systems by solving their technical problems and developing efficient installation and troubleshooting skills
  • We will rely on you to diagnose and repair technical issues as well as support our technical team in the planning, designing and implementation of our client's user networks
  • We will ask you to work towards earning technology and product certification
  • But most of all, we need you to ensure that our client's hardware and software runs correctly
  • Matric certificate a minimum requirement
  • 12 months experience in a Desktop Support Environment
  • A+ certification
  • IT related Diploma/Degree – Advantage
  • Able to solve problems - an organised, patient person who is able to juggle many projects at once
  • Able to interact easily with fellow team members and clients alike
  • We need you to have a deep understanding of common software and hardware systems to be able to build and maintain our client's computer systems and meet their requirements
  • Finally, we care about our clients, our colleagues and the environment and we want you to do the same
  • Compliance with process and systems
17

Technician Level Resume Examples & Samples

  • Periodically review and assist in the update of NDT certification examinations to ensure the effectiveness of this key assessment process
  • Recommend program improvements as needed
  • Revise NDT personnel qualification and certification procedures as necessary to maintain program compliance
  • Develop and maintain all specifications for NDT, including the development and maintenance of all NDT technical procedures, forms and supporting documentation
  • Assist in the preparation of capital expense and operating budgets relating to the above programs, as needed
  • Provide support for training initiatives relating to the areas which assigned, and other training as requested by supervision
  • Serve as representative to ASME, API, ASTM and other bodies, as needed
  • Maintain an awareness and understanding of all applicable regulations, codes, standards, and specifications, as well as company policies and procedures; complete any training necessary to support these activities and communicate these requirements to affected branch personnel as necessary
  • Communicate with customers on technical and program issues
  • Provide training, as necessary, to affected personnel, including customers, to obtain program compliance, process efficiency and effectiveness, cooperation, continued education, and morale
  • Participate in other general administrative and technical activities such as cost reduction methods, communications, safety, housekeeping, and employee training
  • Should have sufficient practical background in applicable materials, fabrication, and product technology to establish techniques and to assist in establishing acceptance criteria when none are otherwise available
  • Establish and track key performance indicators
18

Quality Technician Level, NDT Resume Examples & Samples

  • Performs in-process inspections on most types of fabrication, welding and assembly of pressure vessels, piping, structural steel and process/compressor equipment
  • Interprets drawings, customer specifications and standards of moderate complexity
  • Addresses quality issues related to non-conforming material or components, and obtain timely disposition in order to maintain production flow
  • Maintains an attitude conducive to progress through positive change, continuous improvement, and an active contribution to the teamwork concepts
  • 8-10 years NDT experience ASME Section V, VIII and IX, B31.3 experience is preferable
  • Must have one of the following Level II verifiable Certifications: Phased Array or Guided Wave Ultrasonics and/or Shearwave experience
  • Has comprehensive knowledge of ASME, ANSI, ASNT, ASTM, AWS, NACE, API, ASIC and SSPC national codes
  • Computer Proficiency required. Working knowledge of MS Office (Word, Excel, Outlook); ability to navigate on the internet
  • Familiarity with Quality Assurance (QA) and Quality Control (QC) methods and procedures desired
  • Must have an understanding of the basic physical and NDE (Non destructive examination) Principles and processes; should understand or be educated in fundamental algebra and trigonometry and able to read, comprehend and or prepare technical specifications and procedures
  • CWI certification is a plus
19

Hot Tap Technician Level, / Apprentice Resume Examples & Samples

  • Making a safe entry into a pipe or vessel; operating at a pressure or vacuum
  • Hot taps and conventional line stops
  • HI-Stops®
  • Double Line Stops
  • Through the line valve stops
  • Freeze stops
  • Identifies circumstances that necessitate the use of proper safety procedures and equipment
  • Properly uses, cares for and maintains company tools, equipment and vehicles
  • Communicates and deals with customers and other parties in such a manner as to benefit the professional reputation of the company
  • Completes all required training, including tests, within Company guidelines
  • Is aware of all Company products and services that are available to our customers
  • Performs other related maintenance or shop duties as assigned by supervision
  • Trade School Degree in an industrially related field; or a similar Associate’s Degree; or three (3) or more years experience in industrial operations or maintenance preferred
  • Requires three (3) or more years experience operating as a stand-alone Hot Tap Technician
  • Requires completion of Technician I and II coursework
  • Able to follow precise directions and procedures of the supervisor on the project
  • Current HAZWOPER Training Certificate preferred
20

Technician Level Resume Examples & Samples

  • Performs periodic inspections, tests, and preventive maintenance schedule and report findings
  • Works from mechanical and/or electrical schematic, sketches manuals, specifications and written and oral instructions
  • Under minimal directions, works directly from the work orders
  • Uses hand and power tools and other equipment as necessary to complete assignments
  • Follows all company safety and security procedures
  • Maintains a clean and orderly work area
  • Completes all other tasks required by his immediate supervisor
21

NDI Technician Level Resume Examples & Samples

  • Performs Organizational and I-Level Maintenance NDI functions for scheduled/unscheduled maintenance IAW with the CNAFINST 4790.2B, DS2 SOI’s, MIL-STD-410E, and applicable T/M/S aircraft MIMs/Tech Pubs and TDs
  • The Non Destructive Inspection (NDI) personnel assigned will be required to maintain proficiency IAW applicable Department of Defense and Navy standards for Non Destructive Inspections methods, which may include but are not limited to Eddy Current, Conductivity, Ultrasonic, Resonance, Dye Penetrant, Magnetic Particle and Radiography Inspections utilizing Navy/ DOD/commercial test standards and equipment on aeronautical and non-aeronautical equipment
  • Must meet requirements for eyesight and physical dexterity to perform tasks
  • Conduct NDI Inspections–Eddy Current, Conductivity, Ultrasonic, Resonance, Dye Penetrant, Magnetic Particle and Radiography Inspections utilizing Navy/ DOD/ commercial test standards and equipment on aeronautical and non-aeronautical equipment
  • Interprets NDI results and reports them to appropriate authority
  • Must be able to pass radiation physical
  • Maintains required logs and records of work performed
  • Keeps all NDI personnel training and history records up to date
  • Ensures that all radiation badges are utilized when x-ray operations are in progress and monitors for exposure
  • Ensure that radiation badge records are annotated as necessary
  • Inspects, cleans and maintains assigned NDI equipment
  • Report any irregularities to management
  • Prepares aircraft for NDI inspections
  • Coordinates site preparation for NDI activities
  • Ensures all safety mechanisms on NDI equipment are in place and operable
  • Coordinates placement of barrier monitors
  • Ensures work area is maintained in a neat and orderly manner and that all safety rules and regulations are observed
  • May work with other groups or personnel to resolve problems
  • May have to assist in training in NDI Methods
  • Perform other tasks as directed by management
  • Maintains and/or completes required records
  • Performs daily duties normally associated with this specialty
  • Annotates maintenance actions in aircraft forms and VIDS/MAF, Work Orders in NALCOMIS/OOMA
  • Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment
  • Keeps shop area clean and participate in daily hanger cleanups
  • Certification of all NDI personnel in the radiographic, ultrasonic, eddy current, magnetic particle, and liquid penetration methods shall be in accordance with MIL-STD-410E
  • Must have aircraft maintenance experience within the last two years
  • Must possess a state’s driver license
  • Must be able to communicate clearly and concisely to prepare and present on-the-job maintenance training and technical briefings
  • Will be capable of cross training into or assisting other workcenters
  • Must possess or be able to obtain a secret clearance
  • Corrosion Control
22

Rope Access Technician Level Resume Examples & Samples

  • Perform various nondestructive examinations at heights at various client facilities under the direction of a Project Manager, Team Leader, or independently
  • Maintain climbing logbook per SPRAT/IRATA guidelines
  • Prepare NDE reports and document data in a clear and timely manner
  • Interface with client on technical matters involving Rope Access and NDE procedures and capabilities
  • Stay abreast of any new developments in NDE technologies and Rope Access technologies that may be applicable in our business
  • Current SPRAT/IRATA certification (Level I, II, or III)
  • ASNT Level II certification in RT(profile); UT-Thickness
  • Ability to pass physician’s exam
  • A mind set of safety first
  • Must be able to apply examination criteria in accordance with applicable standards/specifications/procedures on the provided job scopes, and evaluate test results
  • Maintain open lines of communications with coworkers, clients, and subcontractors
23

Maintenance Technician Level Resume Examples & Samples

  • Understand & demonstrate use of the principles of electricity, electronics and control systems
  • Demonstrate an understanding of the National Electrical Code and NFPA 70-E
  • Perform PLC and control system troubleshooting and repair
  • Diagnose and repair or replace malfunctioning apparatus and components, such as transformers, circuit breakers, fuses, motors, fixtures, PLC’s, motion controllers and drives
  • Troubleshoot Controlnet, Devicenet, DH+, Remote IO and Ethernet networks
  • Complete all mandatory training
  • Must possess either a journeyman's card from a state approved apprenticeship program or a minimum of 3 years of hands-on electrical work in manufacturing systems maintenance or equivalent military experience
  • Must have basic understanding of PC's and basic computer skills
  • Must possess experience in industrial electrical systems
  • Must possess experience in Allen-Bradley PLC’s
  • Must possess experience in process controls and instrumentation
  • Must possess experience with motors and controls (AC and DC)
  • Must possess experience with analog and digital devices
  • Must possess experience with schematics and electrical print reading
  • Demonstrated ability to use Current Probe, Multi-meter, Oscilloscope
  • Ability to read and understand electrical diagrams
  • Ability to systematically troubleshoot detailed electrical and electronic systems
  • Ability and understanding to work with voltage up to 480 volts
  • Ability and knowledge to troubleshoot programmable controllers
  • Understanding of analog circuits, i.e. 4-20 ma or 0-10 volts
  • Experience troubleshooting electrical and electronic systems
24

Technician Level Resume Examples & Samples

  • A minimum of 2 year experience as a technician in a manufacturing, military or industrial facility is required. This experience will include the set-up, changeover, assembly, disassembly, repair, operation and modifications or preventative maintenance of complex mechanical equipment. Applicants without the required experience may be considered for a trainee position so they can obtain the required experience on the job
  • Must pass the MMD "Standard Timing Model" as well as the MMD Electrical standard training module
  • Ability to instruct and train other employees, mechanical aptitude, ability to read blueprints, knowledge of electrical, hydraulic and pneumatic principles
  • Ability to handle numerous complex details of the job, and handle distractions. Mathematical skills to perform in­ process calculations
  • Must pass an annual sight screen examination (includes test for color blindness) before working in this capacity
  • Experience in aseptic bulk product formulation, aseptic processing which involved making sterile connections, clean rooms, gowning or manufacturing of products in cGMP facilities using process descriptions, sample measurement, and in-process additions
  • Experience in other highly regulated industries is also desirable
  • Experience in instrumentation, detection and control devices, solid state electronics, computer mathematics, digital and analog logic and robotics
  • Attends and actively participates in HAZOPS, waste walkthroughs, kaizen events, or any other operations, lean six-sigma, quality safety or environmental training initiatives as required
25

Rework Technician Level Resume Examples & Samples

  • Receive training on proper methods for cutting, grinding, polishing, drilling, stud removal, stud replacement and various manual hand-reworking of gas turbine engine components at a basic level
  • Basic knowledge of operating pneumatic hand tools, precision tools and other shop equipment to perform accurate dimensions
  • Use basic troubleshooting logic to identify defects in component parts
  • Comply with work scopes instructions
  • Read and interpret technical documents
  • Use computer to create re-routes for parts needing additional repair at a basic level
  • Demonstrated ability to use precision measuring tools (Micrometers, Indicators, etc.)
  • Ability to work any shift and overtime as needed
26

Service Technician Level Resume Examples & Samples

  • Ability to look up parts efficiently
  • Proficient with electronic media (Technical Prints, Cat Base, Bulletins & Recalls, SAP)
  • Class B commercial driver's license with a passenger endorsement; (a good +)
27

Entertainment Technician Level Resume Examples & Samples

  • Capable of operating audio, lighting, special effects, and video equipment for live shows. Ensures all show cues are taken as required by Entertainment Management. Responsible for technical elements of shows and show venues
  • Working knowledge of entertainment technology to include one of the following disciplines: audio, lighting, video and special effects
  • Willingness to learn and become proficient in multiple technical disciplines as required
  • Understanding of entertainment terminology as it relates to equipment, staging, show cues and scripts
  • Carries out all necessary technical pre and post show checks of equipment and props to ensure the safety and good working order of all equipment
  • Carries out regular maintenance checks on all equipment at the facility, and reports all incidents and defects to an Entertainment Supervisor
  • Knowledge of basic electrics, able to trouble-shoot signal flow effectively
  • Able to obtain certification to operate a forklift, genie lift and scissor lift
  • Assists with load in and load out of special events production equipment and decoration throughout the park
  • Basic carpentry skills and willingness to operate power tools
  • Assembles scenery and staging
  • Follow Spot operation
  • Demonstrate care and maintenance of equipment and tools
  • Lends assistance to other LEGOLAND departments as necessary
  • Collects facility keys at the start of each day and is responsible for opening and securing the facility at the end of each day
  • Attend all show rehearsals as required to train and maintain LEGOLAND California’s show program
  • Monitor sound levels of assigned show location
  • Maintains a clean and safe environment in the control, stage and backstage areas at all times
  • Complies with safety regulations, operating equipment per safety guidelines and procedures
  • Completes a daily Show Report, outlining pertinent information from the day’s operation
  • Assists any other LEGOLAND departments in maintaining clean and safe facility environments whenever possible
  • Assists as required in all emergency procedures as outlined by emergency plan
  • Reports to Entertainment Duty on status of venue (show ready) at the beginning of each day. Informs Duty of any show issues immediately throughout the day
  • Personal conduct reflecting the Merlin Values
28

Technician, Level Resume Examples & Samples

  • Broad mechanical and /or electrical repair and maintenance capability –
  • Position level will be determined by skills and experience of the applicant
  • Shift will be determined by seniority of the applicant
29

Engineering Technician Level Resume Examples & Samples

  • Works with Embedded Software Test Engineers, to design and assemble specific industrial control systems hardware test beds for embedded software functional testing of programmable controllers
  • Be able to construct and wire a test bed from a block drawing diagram and high level schematic
  • Must have a detailed understanding of, and experience working from electrical schematics and wiring diagrams
  • Wire a test bed with safety in mind adhering to applicable safety standards. Conduct routine troubleshooting of electrical wiring/circuits to determine and correct problems/issues
  • Typically requires vocational, military, or other education in electrical circuitry and theory. Initiate corrective action process when required
  • Completes all related test and quality documentation. Will require long hours of standing
  • There may be occasions where overtime hours will be required
  • Knowledge and/or experience with products, software, communications networks
  • Experience troubleshooting wiring. Familiarity with National Electric Code
30

Engineering Technician Level Resume Examples & Samples

  • Coordinate offsite testing when required
  • Perform circuit / product testing, evaluating performance per specification and providing expert insight as to other observed phenomena
  • Experience in complex thermal data acquisition systems
  • Utilize and interpret the following test and development instrumentation: Digital oscilloscopes, Analog and digital volt meters and ammeters, Differential amplifiers with voltage probes, Current transformers, hall effect current probes with amplifiers, LCR meters, Tachometers, Torque transducers, Power supplies, Plotters, Personal computers, Spectrum analyzers, Logic and data analyzers, IR imaging equipment, Dynamometers, and Environmental Chambers
  • Applies knowledge of internal/external processes to develop and implement strategic work assignments. Writes reports, test plans, functional specifications, hardware descriptions, and other related or supporting levels of documentation
  • Assist others in the accomplishment of development programs, from proposing and evaluating design concepts through experimentation and prototype development including engineering documentation
  • 4 years’ experience in the Development or Product Engineering groups
  • Basic knowledge of AC Drives
  • Leadership and interpersonal skills
31

Maintenance Technician Level Resume Examples & Samples

  • Replace seals, bearings, worn or broken components and shafts
  • Align gears, sprockets, motors, gearbox assemblies and shafts
  • Remove and replace defective assemblies or subassemblies
  • Repair, re-time, and adjust machinery in a reasonable length of time
  • Effectively troubleshoot root cause failures/problems with pneumatic, hydraulic, and mechanical systems
  • Setup and modify equipment for changeover to different items, weights, sizes and configurations
  • Overhaul equipment per specified technical plans
  • Maintain area, tools, and equipment in a clean, safe, and proper manner
  • Must possess a High School Diploma/GED
  • Must be able to read, write, and comprehend English
  • Must be able to accurately use precision measuring tools (calipers, micrometers)
  • Must possess hands on mechanical shop skills
  • Must have experience/ability to diagnose & correct mechanical problems
  • Must have understanding of basic pneumatic & hydraulic functions/components
  • Must have ability to interpret technical drawings & schematics
  • Must be detail oriented and demonstrate organized work habits
  • Must be flexible to work any shift (1st, 2nd, and 3rd shift)
  • Must be available to work weekends, holidays, and overtime as scheduled
  • Must possess either a journeyman’s card from a state approved apprenticeship program or a minimum of 3 years in manufacturing systems maintenance or equivalent military experience
  • Must pass the written mechanical NOCTI and hands-on test
  • Must have a basic understanding of PC’s and basic computer skills
32

Engineering Technician Level Resume Examples & Samples

  • Works with Embedded Software Test Engineer, to design and assemble specific industrial control systems hardware test beds for embedded software functional testing of programmable controllers
  • Wire a test bed with safety in mind adhering to applicable safety standards
  • Conduct routine troubleshooting of electrical wiring/circuits to determine and correct problems/issues
  • Completes all related test and quality documentation
  • Will require long hours of standing
  • Minimum Qualifications Associates Degree in Electronic Technology or equivalent knowledge
  • Typically 5-10 years of experience wiring in a panel shop or machine maintenance
  • Working knowledge of PC equipment and related software
  • Working knowledge in wiring PLC-based industrial controls, including electrical schematics, best wiring practices and diagrams. (This is not an electrician position however previous experience could apply)
  • Desired Qualifications Knowledge and/or experience with products
33

Engineering Technician Level Resume Examples & Samples

  • Build up and modification of work stations and test setups to include motors, cabling, communication, and drive systems for both AC and DC applications
  • Utilize and trouble shoot with assistance automation programs based on RS Logix (ladder logic), C, Visual Basic, and TAF
  • Utilize and interpret the following test and development instrumentation: digital oscilloscopes, analog and digital volt meters and ammeters, differential amplifiers with voltage probes, current transformers, Hall Effect current probes with amplifiers, LCR meters, torque transducers, power supplies, personal computers, dynamometers, and environmental chambers
  • Actively support safety programs through preparation and maintenance of department safety- related processes and procedures, including lockout-tag out (LOTO), inspections, and related processes
  • Ensure a safe lab working environment by enforcing safe lab practices by all who enter the labs
  • With assistance troubleshoot a work cell system or test setup to determine root cause and remedy for malfunction
  • Assist in construction and support of automated test stations for functional testing
  • With assistance, use communication protocol such as E-Net; D-Net; and C-Net
  • 2 years’ experience in the Development or Product Engineering groups
  • Basic knowledge of AC/DC Drives
34

Engineering Technician Level Resume Examples & Samples

  • Supports engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment
  • Applications may include analog, digital and/or video circuits, and logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
  • Assists in the design, construction, test and check-out of test equipment
  • Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus
  • Typically requires 3-5 years of experience
35

Technician Level Resume Examples & Samples

  • 1) Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Minimum of High School Education
  • 2) 3+ year’s technical experience in troubleshooting and repair of data network hardware
  • 3) Good communication and interpersonal skills
36

Engineering Technician Level Resume Examples & Samples

  • Interested candidates who have ability to ability to work as a team member for the test organization
  • Adapts to and embraces change by identifying needs, adjusting, and working with others as appropriate to implement initiative
  • Supports engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment. Applications may include analog, digital and/or video circuits, and logic systems
  • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions
  • Ensures thorough familiarity with company policies and procedures
  • Appropriately applies policies and procedures in compliance with government laws
  • Typically requires 2-3 years of experience with minimal supervision, drives discrete activities toward completion with the ability to communicate functionally within the test organization
  • Contributor in the area of Product Development and Test
  • Requires the physical ability to use telephones, computers, and other devices, which require dexterous work with the hands
  • This position also requires the mental and visual ability to read and interpret AutoCAD drawings, computer programs, operating systems, and communications systems information
  • The ability to use a drill press, power tools, and hand tools
  • Able to perform basic soldering tasks, with surface mount soldering experience being a plus
  • The ability to lift up to fifty pounds
37

Engineering Technician Level Resume Examples & Samples

  • Interested candidates who have ability to perform testing of new product lines for industrial inverters/converters in a laboratory environment
  • Duties include assessing test equipment requirements, creating detailed test documentation and executing test procedures for analog, digital and various 3 phase power converter products
  • Supports development engineers and design personnel as required
  • Capable of operating in an independent mode once direction has been provided by an engineer or project manager
  • Utilize and interpret the following test and development instrumentation: digital oscilloscopes, analog and digital volt meters and ammeters, differential amplifiers with voltage probes, Current transformers, hall effect current probes with amplifiers, LCR meters, tachometers, torque transducers, power supplies, plotters, personal computers, spectrum analyzers, logic and data analyzers, IR imaging equipment, dynamometers, and environmental chambers
  • Provide engineering content to other department personnel for new and improved products
  • Help develop alternative technical solutions and design tradeoffs on features versus cost, performance & timing
  • Appropriately applies policies and procedures in compliance with government laws. Policies and procedures include, but not limited to : Standards of Business Conduct, Intellectual Property, Control Environment, Information Protection, ISO 9000 & 14001, government regulations (e.g. health, safety, quality and environmental),
  • Assist in solving customer problems, operating in concert with the assigned engineer
  • Utilizes computers for the purpose of collecting data and transferring files
  • Familiarity with business information systems for transfer of engineering data (SAP)
  • 4 years’ experience in the development or product engineering groups
  • Basic knowledge of automation power products and AC drives
38

Engineering Technician Level Resume Examples & Samples

  • 4 years experience in the Development or Product Engineering groups. Basic knowledge of Power Products and AC Drives. Familiarity with laboratory operation, instrumentation, test procedures and specific equipment when so designated
  • Functional
  • Ensures thorough familiarity with company policies and procedures. Appropriately applies policies and procedures in compliance with government laws. Policies and procedures include, but not limited to : Standards of Business Conduct, Intellectual Property, Control Environment, Information Protection, ISO 9000 & 14001, government regulations (e.g. health, safety, quality and environmental), and functional policies
  • Acquire knowledge of the procedures and norms of the organization, and an appreciation of how tasks are accomplished
  • Develops effective working relationships
  • Significant team contributor in the area of Product Development
  • Business
39

Heat Treat Technician Level Resume Examples & Samples

  • Perform all duties as assigned and adhere to TEAM's Core Values of
  • Assist Technician II in set-up/tear-down of equipment; perform routine and preventive maintenance tasks, calibrations and overall equipment and facilities upkeep
  • Must have current certification as a Level I Heat Treat Technician or the ability to gain certification upon acceptance of position
  • The ability to adapt to an ever-changing schedule
  • Able to read technical documents and engineering specifications
  • Knowledge of company safety policies and procedures is preferred
  • Must possess a valid driver’s license and have a clean driving record
40

RV Technician, Level Resume Examples & Samples

  • Completes diagnostics, repairs and rebuilds on power generation products in a service workshop under limited supervision
  • Applies documented procedures and policies to complete complex repairs, assembles and reassembles power generation units, including identifying and preparing required parts and tools
  • Performs preventative maintenance based on assessment of power generation units
  • Assists Level III Technicians with diagnostics and development of repair plans on engines in the workshop
  • Completes required documentation, such as work completed documents, time sheets, quality documents via handwritten forms or business system input screens
  • Adheres to all relevant Health, Safety & Environmental policies, procedures and legislation and reports any issues / incidents to their supervisor
  • Apprentice Trained Power Generation/Electrical Technician (Preferred)
  • Intermediate level knowledge of and/or experience working with power generation products High Voltage/Low Voltage practical experience
  • Local valid driving permit (Preferred)
41

NDT ET Onshore Technician Level Resume Examples & Samples

  • Perform equipment setup and calibration to comply with industry and company standards
  • Maintain inspection equipment in good condition, ensuring equipment that requires routine re-calibration or testing is kept up-to-date
  • Pursue work scope for each job to ensure familiarity with the work to be performed
42

Service Technician Level Resume Examples & Samples

  • Develop personal professional and technical skills on an on going basis
  • Demonstrate leadership through application of the RED CARPET POLICY
  • Uphold and promote corporate core values
  • Advanced troubleshooting and diagnostic abilities
  • Ability to look up parts efficiently and independently
  • Assist customers over the phone with technical issues and / or questions
  • Proactively acquire and expand knowledge of the latest technology and systems in the industry
43

Weapons Technician Level Resume Examples & Samples

  • Allocating manpower to maintenance activities
  • Raising TPRFs against approved data
  • Raising TQs for any aircraft related anomalies
  • Completing EPDRs for his assigned manpower and identifying and training requirements
  • Carrying out thorough shift handovers
  • Identifying and implementing and CI that will support operations
  • Ensure all manhours are accurately recorded either on ESS for aircraft maintenance or in a local log for unassigned tasks (fork lift driving, training courses, meetings etc)
  • Welfare and discipline of all assigned staff under his control in conjunction with other Management and Supervisory staff
  • Must be educated to HNC level or recognised equivalent or have relevant experience supported by formal, recorded workplace applied related training
  • Must have extensive proven post qualification experience of military fast jet maintenance support, at Supervisor level within an operational military flying environment and proven ability to manage all levels of engineering personnel
  • Good understanding of company processes and procedures and industry knowledge
  • An understanding of engineering operating procedures
  • Proven Managerial experience within the aerospace industry preferably gained on 3rd and/or 4th Generation military aircraft at Supervisor level or equivalent
  • A track record of meeting strict deadlines without compromising standards and quality
44

Technician Level Resume Examples & Samples

  • Position will work in a lab-based setting using applicable bakery lab and analytical testing equipment
  • Responsible for assisting with research, conducting experiments, baking, gathering data and reporting findings on assignments/projects that are moderately complex
  • Baking; identification, assessment and validation of formulations from bench top through commercialization which includes organizing all aspects of plant trials
  • Ensures all proper documentation is done accurately and on schedule
45

NDT ET Technician Level Resume Examples & Samples

  • Inspector must possess in depth knowledge of inspection practices and certification process
  • Carry out non-destructive testing on plant, equipment or structures in a safe, effective and timely manner
  • Assess the integrity and safety of equipment and make sound judgment with regards to the suitability of the equipment and its intended use
  • Perform Non-destructive examinations/tests to assess quality condition and/or identify defects
  • Produce detailed reports of inspections, clearly identifying the scope of the inspection and any defects or anomalies found
  • Ensure that all findings are brought to the attention of the appropriate personnel and when required communicate findings to client at the field location
  • Ensure the health, safety and welfare of all personnel by using systems and methods of work that are, as far as is reasonably practicable, safe and without risk to health or the environment
  • Advise the Inspection Services Manager or Inspection Engineer of inconsistencies between work practices and written documents
46

Engineering Technician Level Resume Examples & Samples

  • Ability to schedule, coordinate, and execute reliability tests
  • Basic electrical /temperature measurement and troubleshooting
  • Experience with motor drives and power electronics preferred
  • Develops effective working relationships across Rockwell Automation
47

Natsc, Engineering Technician Level Resume Examples & Samples

  • Prior experience at the Navy Array Technical Support Center (NATSC) as a repair line supervisor or senior technician
  • Experience performing diagnostics/troubleshooting and electronic repairs at the component level using copper and fiber optic signal path repair procedures/techniques using formal work procedures and documented quality standards
  • Experience using the NATSC Depot Application (NDA) and MasterControl document control system
  • Documented experience supervising repair technicians and technical repair line operations
  • Experience using the Towed Array Management System (TAMS)
48

Natsc, Engineering Technician Level Resume Examples & Samples

  • Basic soldering skills and/or fiber optic termination
  • Ability to read, interpret, and perform documented technical processes
  • Experience performing electronic repairs at the component level using copper and fiber optic signal path repair procedures/techniques to documented quality standards using formal work procedures OR, experience manufacturing hose assemblies raw stock to documented quality standards using formal work procedures, OR preparing and terminating cables using formal work procedures and in accordance with documented quality standards
  • Operational knowledge and experience with industrial equipment including, but not limited to, that of the type used with module hosing/dehosing, pressure, tension, and handling testing, and automated/semi-automated electronic test equipment; measuring/grinding of hose material, mechanical swaging, cable connector molding and pressure testing, as appropriate to the shop/product line assigned
49

Engineering Technician Level Resume Examples & Samples

  • The Technician is responsible for performing a wide variety of functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks as well as performing rework and quality testing related to the production of parts, components, subassemblies and final assemblies. In addition, the technician is responsible for electronic or electro-mechanical assembly operations on assemblies and/or sub-assemblies per established standard workmanship and operating procedures
  • Determines and/or follows methods and sequence of operations in performing wiring, component installation and harnessing on assembly units
  • Makes setups and adjustments holding tolerances to blueprint specifications
  • Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans
  • Prepares and maintains records of merchandise shipped
  • Posts weights and prepares goods for final shipment
  • Examines stock and distributes materials in inventory and on manufacturing lines
  • Works from blueprints, process sheets, and sketches to perform production tasks, which may include the cutting and shaping of metal to precision dimensions
  • Ensures compliance with government health and safety regulations including participation in employee training in emergency response, life safety, industrial hygiene, and chemical and fire hazards, conducting safety surveys and recommending corrective action where occupational hazards exist, responding to emergencies and investigating accidents and recommends corrective action and maintaining safe and clean housekeeping practices within assigned work areas
  • 2 year technical school degree in Mechanical Engineering Technology, Electrical Engineering Technology or Manufacturing Technology plus a minimum of 1 year related experience in electrical and mechanical manufacturing assembly, and wiring of electro-mechanical assemblies of control systems and drive systems. OR High school diploma required plus a minimum of 2-4 years’ related experience in electrical and mechanical manufacturing assembly, and wiring of electro-mechanical assemblies of control systems and drive systems
  • Ability to read and understand complex electrical wiring schematics, assembly layout drawings, and ladder diagrams
  • Lifts heavy items up to 35 pounds
  • Must have the ability to operate a forklift and overhead crane
  • Must be able to use hand tools and power tools
  • Ability to assemble and wire electro-mechanical devices, components, and subassemblies from schematics and layout drawings
  • 1 year prior experience using material handling equipment
  • Familiarity with electrical power and safety practices
  • Knowledge of National Electric Code and Standard Industrial Assembly Workmanship Standards is a plus
  • Previous experience with inventory management business systems such as IFS and SAP is preferred