Hydraulic Technician Resume Samples

4.6 (69 votes) for Hydraulic Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the hydraulic technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
AM
A MacGyver
Arlene
MacGyver
7878 Jayme Ports
New York
NY
+1 (555) 920 4495
7878 Jayme Ports
New York
NY
Phone
p +1 (555) 920 4495
Experience Experience
09/2015 present
Houston, TX
Hydraulic Service Technician, Sudbury
Houston, TX
Hydraulic Service Technician, Sudbury
09/2015 present
Houston, TX
Hydraulic Service Technician, Sudbury
09/2015 present
  • Performs other relevant duties as assigned by manager
  • Responsibility to identify and report any unsafe work habits, workplace incidents and / or near misses
  • Follows scopes of work within time constraints to meet established delivery targets
  • Adjust equipment & repair/replace defective parts components or systems according to scopes of work
  • Strives to find safer ways for customers to work with Joy Global products
  • Inspects equipment for proper performance and determines faults and malfunctions
  • Actively participates in continuous improvement initiatives
12/2011 04/2015
San Francisco, CA
Diesel / Hydraulic Technician
San Francisco, CA
Diesel / Hydraulic Technician
12/2011 04/2015
San Francisco, CA
Diesel / Hydraulic Technician
12/2011 04/2015
  • Tends to machines to perform force fitting or fastening operations as specified
  • Performs duties in a safe, efficient manner in compliance with safety rules and regulations
  • Perform other job functions as necessary
  • Assists in the instruction and training of others as requested by supervisor
  • Fastens parts together with bolts, screws, speed clips, rivets or other fasteners using hand, air and/or power tools
  • Strong troubleshooting and problem solving abilities
  • Removes small quantities of metal to produce close fit between parts
06/2007 07/2011
Houston, TX
Hydraulic Hose Technician
Houston, TX
Hydraulic Hose Technician
06/2007 07/2011
Houston, TX
Hydraulic Hose Technician
06/2007 07/2011
  • Keep clean work area
  • Read and understand work orders
  • Providing quotes and taking orders
  • Assisting customers by phone and in person at our facility
  • Assist with warehouse duties
  • Physically measuring specs on a wide variety of parts
  • Test and check hose assemblies per shop procedures
Education Education
Associate’s Degree
Associate’s Degree
Washington State University
Associate’s Degree
Skills Skills
  • Knowledge of quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
  • Strong hydraulic and electrical knowledge is essential
  • Strong troubleshooting and problem solving skills
  • Ability to read blue prints, drawings, schematics
  • Good communication skills to work with multi-dimensional team
  • Possess a solid understanding of mechanic equipment and tools
  • College diploma in mechanical technician or heavy equipment mechanic or equivalent
  • Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services
  • Familiarity with the use of Jigs, cranes, etc
  • Previous experience in hard rock drilling applications and equipment is an asset
Create a Resume in Minutes

3 Hydraulic Technician resume templates

1

Hydraulic Service Technician, Sudbury Resume Examples & Samples

  • Follows scopes of work within time constraints to meet established delivery targets
  • Inspects equipment for proper performance and determines faults and malfunctions
  • Read and interpret assembly blueprints or specifications manuals
  • Maintain and lubricate parts or components
  • Identifies additional repairs, compiles parts and labor estimates and communicates to supervisor
  • Inspect, operate, and test completed products to verify functioning, machine capabilities, or conformance to customer specifications
  • Completes accurate time records, technical reports, failure reports, parts listings and submits drawing revisions
  • Actively participates in continuous improvement initiatives
  • Maintains the functioning of all shop equipment and report any problems or substandard condition to the supervisor
  • College diploma in mechanical technician or heavy equipment mechanic or equivalent
  • Minimum 2 years’ experience in mechanical trade
  • Mechanical technician or Heavy Equipment Tech certification is an asset
  • Journeyman Machinist certification is also an asset
  • Previous experience in hard rock drilling applications and equipment is an asset
  • Familiarity with the use of Jigs, cranes, etc
  • Possess a solid understanding of mechanic equipment and tools
  • Strong hydraulic and electrical knowledge is essential
  • Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services
  • Knowledge of quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
  • Ability to read blue prints, drawings, schematics
  • Good communication skills to work with multi-dimensional team
2

Trainee Hydraulic Modelling Technician Resume Examples & Samples

  • Minimum of 5 GCSE’s (or equivalent) at grade C or above, including English, Maths and Science
  • Strong Excel skills, particularly data analysis and manipulation
  • Excellent interpersonal, verbal and written communication skills
  • Willing to develop skills in the areas of GIS and hydraulic modelling
  • Any interest/previous experience in the water sector would be advantageous, but not essential
3

Hydraulic Hose Technician Resume Examples & Samples

  • Measuring, cutting, assembling, crimping, and testing industrial hydraulic hoses
  • Reading and understanding work orders, then executing
  • Assisting customers by phone and in person at our facility
  • Helping customers get the parts they need
  • Interacting extensively with customers to clarify their needs, research, and recommend parts
  • Meeting or exceeding monthly sales goals while increasing customer satisfaction
  • Providing quotes and taking orders
  • Physically measuring specs on a wide variety of parts
  • Minimum 6 months of experience with measuring, cutting, crimping, and testing industrial hydraulic hoses
  • Minimum 6 months of customer service experience
  • Mechanical and mathematical aptitude
  • Excellent telephone skills
  • Ability and desire to learn new systems and processes quickly
  • Ability to use calipers to measure specs on a wide variety of parts
  • Strong computer skills, particularly Excel
  • Valid driver's license and clean driving record (MVR)
  • SAP experience, strongly preferred
  • Knowledge of industrial distribution products and hydraulics, preferred
4

Hydraulic Hose Technician Resume Examples & Samples

  • Measure, cut, assemble, crimp, etc. industrial hydraulic hose
  • Test and check hose assemblies per shop procedures
  • Read and understand work orders
  • Clean and package hose assemblies for shipping
  • Assist with warehouse duties
  • Keep clean work area
  • Ability to read and understand work orders
  • Ability to read tape measure and caliper
  • Ability to handle material up to 100 pounds
  • Hydraulic power unit fabrication skills helpful but not required
5

Hydraulic Technician Resume Examples & Samples

  • 1 year experience minimum in Hydraulics preferred
  • Some electrical / electronic control experience preferred
  • Able to read assembly diagrams and operational system schematics
  • Good failure analysis skills
  • Will travel and willing to work flexible hours as the job demands
  • Must have full set of hand tools as defined by Company standards
6

Engineering Technician Iv-hydraulic Brake Systems Resume Examples & Samples

  • Prepare and review Reservoir Assembly / Hose Bill of Materials / Variant Overview & Completion
  • Design; CAD Modeling & Packaging of complete washer system components using TCE / CATIA environment 60%
  • In Vehicle Hose Packaging (CAD) – W/ Assistance from OEM / Resident Engineer
  • Support of internal change management systems; (SAP, Bizflow, etc) 15%
  • Production Plant R&D Support 5%
  • Product Life Cycle Process Requirements for Design Engineering & quality hurdles 10%
  • System DFMEA Support
  • Specific/Critical characteristics Lists
  • Design Verification / Product Verification Test Schedule / Execution / Results
  • 3 to 5 years experience in CAD design/drawing within Automotive or applicable industry
  • Experienced with customer support for Design and Launch activities
  • Knowledge of Automotive development process
  • *Visa Sponsorship and Relocation Services are unavailable for this position***
  • 5+ years of automotive design experience using Catia
  • Hose, Brake, Electrical line routing, or plastic injection molding experience
  • Demonstrated experience with automotive launch and customer support
  • Experience at Ford or GM is a plus
  • Drawing preparation capabilities
7

Helicopter Hydraulic Maintenance Technician Resume Examples & Samples

  • Perform inspections on hydraulic systems of assigned aircraft
  • Interpret installation and maintenance policies and procedures related to aircraft hydraulic systems and components
  • Diagnose re-occurring malfunctions and recommend corrective actions
  • Diagnose malfunctions, using technical publications, and perform repair
  • Determine the extent of disassembly necessary to repair or replace hydraulic components
  • Inspect hydraulic components, using visual inspection methods
  • Diagnose malfunctions using applicable technical publications and test equipment using dial indicators, feeler gauges, and micrometers
  • Train customer personnel on all applicable documentation
  • Evaluate performance of assigned personnel
  • Conduct and supervise on the job training programs
  • Train personnel on the use of maintenance manual and customer manuals
  • Excellent communication, effective leadership and interpersonal skills
  • Proven problem solving skills on helicopter hydraulic systems
  • Knowledge of maintenance management systems, maintenance data collection
  • Knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc
  • Six (6) or more years of recent experience in helicopter maintenance specializing in hydraulics
  • A & P Mechanic or graduate of a military helicopter maintenance school
  • Certified on hydraulic systems for assigned helicopters
  • Previous experience training personnel
8

Diesel / Hydraulic Technician Resume Examples & Samples

  • Positions parts and repair according to knowledge of unit being assembled or blueprint
  • Fastens parts together with bolts, screws, speed clips, rivets or other fasteners using hand, air and/or power tools
  • Removes small quantities of metal to produce close fit between parts
  • Tends to machines to perform force fitting or fastening operations as specified
  • Performs duties in a safe, efficient manner in compliance with safety rules and regulations
  • Able to follow written and verbal work instructions to repair defects identified by the assembly process
  • Reroutes, disassembles and repairs as required to complete units for shipment
  • Positions parts according to knowledge of unit being assembled or blueprint
  • Performs overtime work as required
  • Perform other job functions as necessary
  • Keeps area clean and organized
  • Assists in the instruction and training of others as requested by supervisor
  • Must be able to follow established methods and procedures and perform work accordingly. Must have the ability to work rapidly and under time pressure for extended periods of time in order to meet build requirements.Must possess the ability to read build sheets and blueprints
  • The ability to communicate with supervisors and fellow workers in both written and verbal forms at a level normally acquired through the completion of a high school diploma or GED is required.Job specific skills, techniques and safe work and equipment operating practices are learned through on-the-job and classroom training.General instructions are given on recurring duties, operations and assignments; detailed instructions are given on new duties, operations and assignments
  • Must be able to work overnights: 10:30pm-7:00am, Monday-Friday
9

Hydraulic Technician Resume Examples & Samples

  • Maintain and repair mechanical, electrical, and hydraulic systems on vehicles, heavy equipment, derricks, booms, augers, PTO's, and other machinery
  • Maintain and repair vehicle drive trains
  • Fabricate tools and parts as needed
  • Order parts, scan invoices, and complete other computer or paperwork related tasks
  • Install and repair electrical accessories and wiring
  • Perform preventive maintenance in direct repair or outsourcing
  • Assume full responsibility for emergency repairs
  • Complete work to minimize out of service time of any piece of equipment
  • Perform all work as requested by supervisor
  • Work overtime including evenings and weekends in response to acute service needs
  • Travel away from home area and stay overnight up to three nights per week on occasion
  • Demonstrate motivation and initiative to work alone or with others in the absence of direct supervision
  • Write, type, and use computers and related software programs
  • Lift up to 35 pounds frequently and up to 75 pounds occasionally
  • These functions may be considered essential based on location and other factors
  • Maintain and repair vehicle engines*
  • Drive to installation locations*
  • Organize equipment and perform regular and preventative maintenance*
  • Minimum of two years technical training from a college or trade school or 3 years of maintenance experience in the operations area
  • Valid driver's license and satisfactory driving record; valid commercial driver's license or willingness to obtain