Technician, Automation Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the technician, automation job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

K Crist

Krystina

Crist

524 Hattie Road

Los Angeles

+1 (555) 707 5020

524 Hattie Road

Los Angeles

Phone

p +1 (555) 707 5020

Experience Experience

San Francisco, CA

Automation Service Technician

San Francisco, CA

Marvin and Sons

San Francisco, CA

Automation Service Technician

Service, train, and provide application development for customers both in-house and on-site, as necessary
Provide technical assistance at the customer’s site, during installation, and in production situations, as requested
Work on several projects in various stages of completion
General manufacturing engineering duties, working with robotics programming
Robot programming basic/intermediate for touch up related to welding and material handling
Handle technical questions from internal and external customers regarding all Automation products
Electrical installation, drawing mark ups and debug WI-43

New York, NY

Automation & Maintenance Technician

New York, NY

Boehm, MacGyver and Skiles

New York, NY

Automation & Maintenance Technician

Perform preventative maintenance tasks and fill out relevant paperwork. Cross train with molding technicians for mold machine maintenance
Assist QA with finding and implementing corrective actions from customer rejections
Assist with training new operators
Support production with an on call status, authorized for a rotating scheduled overtime on weekends
Look for methods of improving efficiency and ensure quality standards, as an individual and part of a team
Setup automation for presses or assembly machines, wiring and interfacing
Check and adjust parameters during changeovers and note changes for update

present

Philadelphia, PA

Maintenance Technician Manager Industrial Automation

Philadelphia, PA

Wolf, Schuster and Langosh

present

Philadelphia, PA

Maintenance Technician Manager Industrial Automation

present

Assist in the development and management of the detailed, zero-based annual operating budgets
Drive performance as measured by client’s Key Performance Indicators
Work with Regional Manager to oversee the delivery of maintenance and repair services
Assist in the development and implementation of the annual account plan as identified by the Account Director
Develop and manage operating expense budgets for relevant sites including monthly variance reports
Ensure client satisfaction with delivery of Facility Management services and provide a lead role in monitoring and increasing customer satisfaction
Develop a strong collaborative team-based environment

Education Education

Bachelor’s Degree in Electronics

University of California, Los Angeles

Bachelor’s Degree in Electronics

Skills Skills

Basic PLC knowledge and I/O to the robot
Basic Faro Arm knowledge
Basic Cut and Etch knowledge
Basic project management and customer control skills
Robot programming basic/intermediate for touch up related to welding and material handling
Basic/Intermediate Spot welding
Document and organize all technical details
MIG welding knowledge
Set up new and refurbished cells at customer facilities
Responsibilities for troubleshooting and maintaining plant equipment

Create a Resume in Minutes

15 Technician, Automation resume templates

Read our complete resume writing guides

Power Systems Automation Field Service Technician Resume Examples & Samples

Programming of PLC control systems (Power Control, Generator Control, and SCADA)
Working knowledge of test equipment and diagnostic instruments for automation and power management systems
Ability to travel within the US and outside of the US without restrictions
Associates degree from an accredited institution
Minimum of 3-5 years of engineering experience with electrical distribution systems, including a combination of low voltage, critical power, and data center experience or information technology experience
No relocation is provided. This position is open geography. Candidates must reside within 50 miles locations listed
Bachelor’s degree in EE or IS

Automation & Triage Technician Resume Examples & Samples

Minimum of 3 years of demonstrated technical exploitation experience and skills such as computer forensics, DOMEX, reverse engineering, and malware analysis
Ability to design, implement and document computer forensics services to include evidence seizure, computer forensic analysis and data recovery
Ability to convey technical information effectively and concisely to a wide range of audiences
Experience with case management and workflow as well as managing teams
Working experience in law enforcement evidence seizure
Working experience conducting intelligence analysis and writing finished intelligence reporting

Automation & Fixturing Technician Resume Examples & Samples

Assist Manufacturing Engineers, Process Technicians, and Manufacturing personnel with the planning, development and implementation of fixtures and equipment
Assist Manufacturing Engineering in problem solving technical problems with product
Part removal from the press, any secondary operations required on the part and any assembly requirements in a team environment
Design and build end of arm tooling, gate/sprue removal equipment, measuring equipment, small hand tools used during part manufacturing and assembly and automated equipment
Provide equipment BOM, recommended spare parts list and PM schedule
Compile with all safety requirements and procedures and designs all equipment with operator safety built-in
Provide equipment training to supervisors, lead personnel, shift trainers, etc. as required
Assist in providing/obtaining quotes for equipment and identifying requirements from the equipment requester
Vocational/technical college degree in machining (manual and CNC) or work related experience requested
Ability to use CAD/CAM software, preferably Master Cam and Solid Works
Wire and/or troubleshoot control panels and electrical circuits using schematics
Plumb and or troubleshoot pneumatic circuits using schematics
Design and specify mechanical, pneumatic, and electrical components needed to build equipment
Require high degree of mechanical aptitude and creative problem solving
Self motivation and self direction

Maintenance Technician, Automation Resume Examples & Samples

Electrical & Mechanical background with 2-4 years of formal training and/or experience preferred
Ability to troubleshoot and repair Distribution Centre drives, pneumatics, hydraulic and mechanical drives
Advanced knowledge of electrical motor controls and the ability to troubleshoot electrical circuits
Familiarity and understanding of the processes in place for plant machinery
PLC knowledge is preferred
Strong commitment to safety and advanced knowledge of electrical safety code
Ability to work as part of a team and follow directions
Manual dexterity, ability to lift heavy object up to 70 pounds required

EEQ Automation Cell Technician Resume Examples & Samples

Must follow all approved written processes, instructions and procedures
Must develop, improve, and clarify written procedures (i.e. Work Instructions, Activity Instructions, Safety Procedures)
Must assist Engineering and Quality in the development of manufacturing processing techniques
Must perform the required Total Preventative Maintenance (TPM) on the manufacturing cells and automated equipment
Must utilize Human Performance Tools to improve EHS standards, compliance, and product Quality
Must work proactively with Engineering and Quality personnel to ensure product compliance to customer specifications and internal requirements
Must assist in the collection and analysis of process data to identify process improvement opportunities
Must support and actively participate in 6S programs
High School diploma or GED from an accredited institution
One year of Advanced Education preferably in Automation or Manufacturing Technology
A basic understanding of industrial drawings including: electrical and mechanical drawings
Experience with the following technologies is a plus: Wonderware, InTouch, Microsoft SQL, Microsoft Office, Minitab

Automation Maintenance Technician Resume Examples & Samples

5+ years’ experience in industrial electro-mechanical maintenance
Ability to lift a minimum of 75 lbs
Experience operating Scissor Lifts
Ability to climb ladders and work at various heights
Ability to work 3rd Shift

Power Systems Automation Field Service Technician Resume Examples & Samples

Associates degree from an accredited institution AND/OR military experience required
Minimum 3+ years experience with critical power design or working knowledge of packaged equipment solutions relevant to the data center market
Bachelor’s degree in EE or IS from an accredited institution
Minimum 3+ years of Field Service work experience

Automation / Measurement Technician Resume Examples & Samples

Health, Safety, Security & Environmental oversight to ensure a safe and environmentally sound operation
Daily operations in Arkoma
Management of contractor work
Complete required BP training
Seek knowledge and encourage new techniques and/or Automation & Measurement equipment
Utilize and ensure compliance of all essential operating procedures and practices for the automation & measurement discipline
A minimum of a High School diploma or equivalent
Vocational electrical education or electrical degree preferred or equivalent experience
Remote Transmitting Unit (RTU) types, programming and troubleshooting
Radio types, programming and troubleshooting
Solar charging systems and troubleshooting
Batteries and troubleshooting
Analog Input/Analog Output and troubleshooting
Digital Input/Digital Output and troubleshooting
Multi-Variable Transmitter types and troubleshooting
Control valves and troubleshooting
Computer skills and programs – preferably related to SCADA
Antenna, coax and troubleshooting
Wiring systems and troubleshooting
Transmitters and troubleshooting
Calibration of transmitters and RTUs
Oil and gas or equivalent industry experience
Experience with instrumentation
Experience with Radio communications
Experience with a wide range of RTU types
Electrical degree or 2 yrs. Experience

Automation Maintenace Technician Resume Examples & Samples

Ensure Compliance with Relevant Regulations, Procedures, and Guidelines
Partner with Facilities and Building Stakeholders
Experience maintaining mechanical and electrical systems
Training (vocational tech) in welding, mechanical, or electronic systems
Experience maintaining and repairing motors, electronics, PLC, automated controls, and robotic equipment
Experience with Automated Conveyor Lines

Automation Control Technician Resume Examples & Samples

Utilizes project electrical schematics to build control panels, install conduit for electrical control systems, and pull wire for electrical control systems with the appropriate level of detail by applying knowledge of electricity, materials, control equipment, and national\international electrical design standards (NEC, UL, and IEEE)
Maintains company reputation and excellent product quality by utilizing established components, designs, and procedures while complying with federal, state, and local regulations
Travels to customer facilities to support electrical installation function and to provide electrical field service support
Supports general project management function by maintaining control over scope and schedule to meet or exceed project deadlines and budgets
Interfaces with customers, as needed, throughout the course of every project
Contributes to Automation Team effort by assisting others with their projects and completing non-project related tasks as assigned by the Automation Team Manager
Supports Continuous Improvement efforts in the Panel Shop and Skid Wiring facilities
Performs other duties as assigned by the Panel Shop Lead or Automation Team Manager

Automation & Maintenance Technician Resume Examples & Samples

Setup automation for presses or assembly machines, wiring and interfacing
Setup and debug new automation as needed. Make samples for new items/customers
Maintain, troubleshoot and repair various assembly, automation and mold equipment
Perform preventative maintenance tasks and fill out relevant paperwork. Cross train with molding technicians for mold machine maintenance
Check and adjust parameters during changeovers and note changes for update
Clean automation equipment and areas
Replace worn equipment. Design and fabricate small fixtures for equipment
Look for methods of improving efficiency and ensure quality standards, as an individual and part of a team
Assist QA with finding and implementing corrective actions from customer rejections
Maintain inventory of spare parts and write order requests for replenishment
Maintain daily log books for each piece of equipment. Document equipment specifications
Communicate with other shifts, operators, and technicians to give and receive updates on equipment status
Assist with training new operators
Support production with an on call status, authorized for a rotating scheduled overtime on weekends

Automation Maintenance Technician Apprentice Resume Examples & Samples

Inspect and repair automation equipment, tools and work area in addition to assisting with mold changes
Perform preventive maintenance procedures as specified in the QSI system
Complete work assigned by Group Leader or Asst. Group Leader
Communicate activities with Group Leader and other members of department
Maintain neat and orderly appearance of shop and production machines
Obtain parts in emergency cases
Assist in other departments as requested by Group Leader or Asst. Group Leader
Seek training to stay current with job requirements
Assume control of machine when a situation arises which has potential for personal injury or rapid deterioration of machine
Ability to work overtime as needed
Maintain and enforce all company safety, environmental and department of health requirements
Hearing sufficient to recognize and respond to shouted warnings, alarms and horns on forklifts
Stereoptic vision of 20/40 or better and peripheral vision of 70 degrees or greater and ability to read 10 12 point font at a distance of 12-18 inches
Ability to lift 45 pounds at a minimum of 10 times per hour
Able to work in extremes of heat / cold
Able to work independently and with others in a potentially isolated area of the building
Verbal communication adequate to use a radio and or paging system to contact other co-workers in other areas of the complex
Advanced knowledge of mechanical systems, pneumatic, and electrical systems in addition to troubleshooting same
Able to accept responsibility for work performed
Basic trouble shooting skills
Dependable and motivated
Good past work experience
Able to participate in an apprenticeship program
Ability to work at heights (with or without fall protection). Must not be at risk of sudden alterations in consciousness
Able to climb ladders safely and without assistance for a minimum of 10 times per day. Must not be at risk of sudden alterations in consciousness
High School diploma or GED equivalent

Maintenance Technician Manager Industrial Automation Resume Examples & Samples

Responsible for performance of team of technicians over multiple shifts or a large scale facility to perform maintenance and repair on client equipment and facilities systems
Establish and maintain a safety-first culture by promoting and driving safe work practices timely training, best practices as well as delivering rewards and recognitions to promote safe behavior
Drive performance as measured by client’s Key Performance Indicators
Establish relationships with client Site Leads, business partners such as EHS leads and FM clientele to establish trust and credibility in the delivery of IFM services
Resolve FM issues at sites under purview, escalating when needed
Provide engineering guidance to Technician s as needed to ensure operations are aligned with site and portfolio goals and values
Develop and manage operating expense budgets for relevant sites including monthly variance reports
Initiate purchase order requests for goods and services for sites within responsibility
Manage subcontractors and suppliers to deliver goods and services against contracts and expectations
Administer training to ensure compliance, readiness and competency of staff
Drive and promote safety culture within portfolio including subcontractors, suppliers and visitors
Work with Regional Manager to oversee the delivery of maintenance and repair services
Ensure client satisfaction with delivery of Facility Management services and provide a lead role in monitoring and increasing customer satisfaction
Act as point of contact with site occupants, property management/ Landlords to coordinate FM activities and ensure client needs are met
Support the Regional Manager in the implementation of short and long-term projects for the client as requested
Assist in the development and implementation of the annual account plan as identified by the Account Director
Minimum five years’ experience in Operations Management in an industrial environment containing conveyance, process control and powered trucks in a distribution and/or manufacturing plant
Experience with managing teams of 10 or more, budget responsibilities, supplier management, problem solving, and client/ customer relations
Relevant training in MHE, Controls Systems, PIT as well as general building operations
Must have solid knowledge of building/ mechanical, electrical systems (MEP)
Experience required using CMMS systems and reporting
Demonstrated communication skills written and verbal including negotiation and conflict resolution
Must have strong computer skills, including MS Excel, Word and Office Strong organizational skills
Ability to align, motivate and lead a team including creating accountability
Bachelor’s degree highly preferred or equivalent work experience in Facilities Management or property management

Senior Technician, Automation Resume Examples & Samples

Provide technical knowledge and decision-making capabilities to troubleshoot and repair a variety of electrical, instrument, pneumatic, and control systems
Responsible for radio, satellite and network communications
High School Diploma/GED Required
Minimum 5 year experience related experience in instrument and electrical controls
Good communication and problem solving \ troubleshooting skills

Technician, Automation Resume Examples & Samples

Logically troubleshoots and repairs the pilot assembly line and related bench top equipment
Assists shift lead in maintaining quality of finished product through proper machine operation
Responsible for maintaining spare parts inventory with a proper cataloging of parts
Provide a timely notification to shift lead of maintenance issues and downtime
Reviews line history and documentation to enhance line efficiencies. Follows escalation plan to minimize downtime
Maintains and updates all equipment log books with accurate repair/adjustment information
Interfaces daily with shift leader and technician at shift change
Maintains cleanliness of all equipment
Performs other duties as assigned based on business needs
Education or Equivalent Experience: 2 year technical degree
2 years of experience in related industry
Experience in medical device industry or other regulated industry
Background with medical/pharmaceutical clinical trials would be a plus
Knowledge of quality systems requirements, FDA Quality System Regulation, cGMP and ISO 9002

Engineering Technician, Automation Resume Examples & Samples

Work with a team to develop, assemble, wire, test, and document new automated equipment
Build and test automation equipment based on drawings and test plans
Manage in-coming parts
Build jigs and prototypes
Operate, maintain, and write training and operating procedures for this new automated equipment

Automation Service Technician Resume Examples & Samples

Handle technical questions from internal and external customers regarding all Automation products
Provide technical assistance at the customer’s site, during installation, and in production situations, as requested
Service, train, and provide application development for customers both in-house and on-site, as necessary
Maintain inventory records, service reports, and requisition materials for service, as needed
Occasional packing and shipping of parts orders

Technician, Measurement Automation Resume Examples & Samples

Install measurement, communication and SCADA equipment
Program, configure, and commission a variety of Liquid and Gas Flow computers, RTU's and controls equipment
Daily use of computer laptop, applications software for various types of equipment
Instal Gas, Liquid, and NGL measurement equipment
Repair and replace communication equipment
Diagnose and repair Analytical Equipment
Coordinate with Engineering on installation, work with Pipeline Operations, and coordinate with Liquids and Gas Control Centers
Vocational-Technical certificate or an Associate’s degree in electronics or related field experience is required
Experience in basic computer use including the use of word processing, spreadsheets, and email software as well as experience with configuring various Liquid and Gas measurement software applications is required
Experience with and knowledge of preventive and corrective maintenance of various types of Measurement, Communications and SCADA equipment is preferred
A valid driver's license is required
Must be willing and able to perform essential functions of this position in an outdoor environment under variables such as inclement weather conditions including extreme heat, cold, wind and precipitation, variable heights, and unstable terrain
Must be able to understand the operation of and repair of various applicable mechanical and technical equipment or systems
Great team player who interacts effectively with co-workers, customers and the public, whether in a group or in independent cooperative activities
Must be accountable and self-driven to learn, and to continuously develop and improve skills through both formalized and on-the-job training
Must be able to travel on a daily basis to various locations. Will require occasional overnight travel

Automation Maintenance Technician Resume Examples & Samples

In this role, you will be a hands-on technician in the Operations Engineering Department and will be the primary support to production in troubleshooting and resolving manufacturing equipment downtime to ensure maximum output
You will work closely with Production and Engineering groups in a high volume manufacturing environment to monitor equipment status and repair equipment to optimize performance
You will be proactive in addressing problems using the appropriate troubleshooting and repair techniques
You will carefully document all repairs and the appropriate adjustments made
In addition, you will assess the equipment’s performance and repair history and work with engineers to plan and execute preventative maintenance schedules as well as work on equipment upgrades as appropriate
Ultrasonic welding experience is a plus
GMP experience
PLC knowledge and experience is a big plus
Associate's or Bachelor's degree is preferred

Automation Service Technician Opex-oee Resume Examples & Samples

Provide OPEX OEE services in the area of field device and in back-office and Support implementation of OPEX OEE infrastructure
Support and Execute Smart Manufacturing projects in the area of field device integration, programming PLCs and assisting in the development of Supervisory Control and Data Acquisition (SCADA) systems
Support and Execute Total Productive Maintenance related projects in the area of field device integration
Work with sites and external partners to ensure the successful rollout and on-going field device projects
Assist in the development of Voith standards in the area of field device integration
Maintain user and system documentation and provide basic training
Successfully completed a technical qualification, e.g. Mechatronics, Automation or a comparable degree with a professional experience
Experience working with field device integration projects, specially SCADA and HMI
PLC Hardware/Software expertise and programming skills
Experience with OPC, Ethernet/IP based communication protocols
Experience working in a manufacturing environment, with maintenance and maintenance documentation systems
Experience in LEAN manufacturing / philosophy
Good knowledge of spoken and written German and English
Organized with good communication skills
Willingness to travel internationally (ca. 25% – 40% max.)

Paint Automation Maintenance Technician Resume Examples & Samples

Experience with industrial equipment maintenance/ environmental (HVAC) and mechanical control systems
More than 3 years of experience with troubleshooting and maintaining industrial automation systems, preferably Fanuc robots (or similar)
More than 3 years of experience with troubleshooting PLCs, preferably Siemens and Allen Bradley
Experience with interpreting schematics and process and instrumentation drawings, preferably electrical, mechanical and pneumatic
3 years of experience working in robotics with knowledge of automation and robotics safety standardization
Must be willing and able to work any shift, to include days, evenings, nights, and weekends
Must be willing to work at any site in the Boeing South Carolina region
Large-scale industrial paint operations experience
Experience using oscilloscopes, volt-ohm meters, signal analyzers, and micrometers
Understanding of customer service concepts
Experience with MS Office (Word, Excel, and Outlook)

Automation Service Technician Resume Examples & Samples

High school, GED, Vocational High School or Technical College or equivalent experience
1 year experience as a Service Technician I or equivalent experience
Mechanical skills to include, plumbing, assembly of small and large components and shimming
Robot skills to include ABB, Fanuc, Motoman, Panasonic, Kuka, etc.. touch up and basic programming a minimum
Electrical skills to include low voltage component replacement and debug
Basic PLC knowledge and I/O to the robot a plus
Basic Faro Arm knowledge a plus
Basic Cut and Etch knowledge a plus
Basic/Intermediate Spot welding a plus
Automation service technician I responsibilities and experience (TRS-129)
Communicate between tooling tech and PLC Programmers
Set up new and refurbished cells at customer facilities
Responsibilities for troubleshooting and maintaining plant equipment
MIG welding knowledge
General manufacturing engineering duties, working with robotics programming
Document and organize all technical details
Basic project management and customer control skills
Work on several projects in various stages of completion
Robot programming basic/intermediate for touch up related to welding and material handling
Electrical installation, drawing mark ups and debug WI-43

Technician, Measurement Automation Resume Examples & Samples

Install Gas, Liquid, and NGL measurement equipment
Ability to perform essential functions of this position in an outdoor environment under variables such as inclement weather conditions including extreme heat, cold, wind and precipitation, variable heights, and unstable terrain is required
Ability to understand the operation of and repair of various applicable mechanical and technical equipment or systems is required
Ability to be a great team player who interacts effectively with co-workers, customers and the public, whether in a group or in independent cooperative activities is required
Ability to be accountable and self-driven to learn, and to continuously develop and improve skills through both formalized and on-the-job training is required
Ability to travel on a daily basis to various locations is required. Will require occasional overnight travel

Download Technician, Automation Resume Sample as Image file