Spray Painter Resume Samples

4.9 (86 votes) for Spray Painter Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the spray painter job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
KK
K Kreiger
Kavon
Kreiger
54038 Homenick Divide
Houston
TX
+1 (555) 657 1734
54038 Homenick Divide
Houston
TX
Phone
p +1 (555) 657 1734
Experience Experience
San Francisco, CA
Spray Painter
San Francisco, CA
Schaden, Wiegand and Kuhic
San Francisco, CA
Spray Painter
  • Uses all tools and fixtures necessary for the performance of tasks
  • Perform other similar or related duties as assigned or directed
  • Maintain work area and equipment used in a clean and orderly condition. Observe all prescribed and standard safety rules and regulations
  • Notify supervision of improper operation, faulty equipment, defective materials, and unusual conditions
  • Mix and thin paint to proper consistency. Occasionally mix special custom paints
  • Apply primer and finishing coats using spray guns and rub down surfaces between coats
  • Wipe, clean, and mask areas not to be painted
San Francisco, CA
Production Spray Painter
San Francisco, CA
Miller-Leannon
San Francisco, CA
Production Spray Painter
  • Performs routine equipment maintenance
  • Advise supervision of problems and make minor repairs to remove metal dents, smooth rough castings, or fix similar imperfections
  • Successfully complete a pre-placement medical and functional abilities examination based on performing the essential duties of the position
  • Touch up paintwork and apply polish to vehicles or equipment
  • Examine work for obvious finishing defects
  • Paint work pieces by hand and/or using industrial spray gun
  • Performs visual inspection of all material prior to painting
present
Philadelphia, PA
YRK USW Spray Painter
Philadelphia, PA
Anderson-O'Connell
present
Philadelphia, PA
YRK USW Spray Painter
present
  • Perform touch-up work, remove masking, and move completed work to drying, storage areas
  • Work from work orders, verbal or written instruction, and including equipment operation or paint mixing information
  • Properly adjust air pressure and gun nozzle to accommodate work to be performed
  • Prepare various work pieces to be painted (taping, grinding and deburring)
  • Perform specialized electrostatic equipment maintenance duties including requisitioning of supplies, replacement items, or parts
  • Perform minor maintenance of equipment, replacing filters, and discarding old ones in a proper manner
  • Remove masking papers before waxing and polishing finished paintwork
Education Education
Brigham Young University
Skills Skills
  • Basic knowledge of use and removal of Hazardous Material
  • Ability to prioritise workloads to ensure you achieve targets
  • Able to use hand and power tools or a willingness to learn
  • Able to perform manual work (Fitness for work)
  • Basic numeracy/Literacy skills
  • Able to follow written instructions and procedures
  • Basic computer skills and or a willingness to learn
  • Trade qualification
  • Experience in painting within a bodyshop environment and working on motor vehicles
  • Qualification equivalent to Certificate III in Automotive Refinishing Technology
Create a Resume in Minutes

5 Spray Painter resume templates

1

Spray Painter Resume Examples & Samples

  • Paint work pieces by hand and/or using industrial spray gun
  • Prepare various work pieces to be painted (taping, grinding and deburring)
  • Mix paint while ensuring proper identification and colour codes meet customer requirements
  • Maintain stock of paint, supplies and other related equipment required
  • Perform required cleaning and scheduled maintenance tasks of paint booth and maintain updated maintenance records
  • 3 to 5 years experience working in industrial spray painting an asset
  • Familiar with metal fabrication environment
  • Knowledge of compressed air spray process, respiration and the safe handling of combustible and flammable liquids and paints
  • Good organizational
  • Successfully complete a pre-placement medical and functional abilities examination based on performing the essential duties of the position
2

Spray Painter Resume Examples & Samples

  • Checks the Bills of Material for correct color and specified mull thickness. Records serial number of units repainted and affixes color-coded dot to unit for identification
  • Must adjust and periodically check all pump pressures, heater temperatures, air and fluid pressures to maintain the best possible spraying application condition
  • Is responsible for paint viscosity at the beginning of the shift and at mid-shift, uses a Zahn cup and stopwatch to check paint viscosities when required
  • Must check and maintain proper fluid and air pressure in pressure pots used for spraying all special colors
  • Must check units with great care to insure that no areas have been missed
  • Changes filters and maintains cleanliness of spray booth associates floor areas on a scheduled basis
  • Cleans and lubricates all spray guns at the end of the shifts
  • Cleans and maintains personal respirator on a scheduled basis
  • Procures all paints from Paint Room as needed, using hand cart and barrel truck
  • Uses 15,000 lb. electric walker to move smaller units into spray booth. Also uses walker to store repainted units in staging area for inspection
  • Coordinates with Crane Operator all moves of large units in and out of the spray booth
  • Employee must receive hazardous waste training before handling hazardous waste and annually thereafter
  • Employee needs to understand how to transfer waste into the hazardous waste building
  • Employee needs to be trained in the facility’s emergency response procedure in the event the container holding hazardous waste is spilled
  • High School Diploma or GED from an accredited institution required
  • Minimum of six (6) months previous spray painting experience required
  • Previous working knowledge of industrial airless and/or air pressure painting required
  • No relocation is being offered for this position. Candidates must reside within the 50 miles of the work location in order to be considered
3

Spray Painter Resume Examples & Samples

  • Experience in painting within a bodyshop environment and working on motor vehicles, ideally ATA
  • Ability to work with heavy materials in a job that requires physical exertion
  • Ability to prioritise workloads to ensure you achieve targets
4

Spray Painter Resume Examples & Samples

  • Experience in painting within a bodyshop environment and working on motor vehicles
  • NVQ 3 or Senior ATA preferred
  • A competitive salary, benchmarked against our competitors, which will grow as you do
  • Pension 9% of your base salary, you can choose to contribute less or more than this, and anything you don’t wish to put in to your pension you can take as cash instead!
  • Private medical insurance (anyone can choose this through our flexible benefits scheme, and managers receive this as standard)
  • Attractive holiday entitlement
  • 50% off our Home, Motor and Pet insurance
  • Free Travel insurance
  • Free Green Flag breakdown cover
  • Flexible rewards including Life insurance, income protection, critical illness insurance, personal accident insurance
  • Retail card, with discounts at big name retailers
  • My Discounts - a discounts website for all our employees, with great discounts, cash back savings and offers across hundreds of brilliant high street brands, travel, tickets, gym memberships and much more
5

Spray Painter Resume Examples & Samples

  • Prepare parts or assemblies, clean, and mask work; set up and operate equipment in prescribed manner and electrostatically spray paint a variety of pumps, components, and accessories
  • Work from work orders, verbal or written instruction, and including equipment operation or paint mixing information
  • Use solvents, paint and thinners, wiping cloths, metal fillers, small sanding/grinding equipment, or other required metal prep equipment and hand carts, lift platforms or trucks, hoist or other handling devices to obtain, move, or position work
  • Operate paint spray and associated auxiliary equipment as instructed or directed
  • As required, use mask and protective, disposable type work clothes
  • Examine work for obvious finishing defects
  • Advise supervision of problems and make minor repairs to remove metal dents, smooth rough castings, or fix similar imperfections
  • Follow prescribed practice to properly sand, grind, or fill defects
  • Wipe, clean, and mask areas not to be painted
  • Mix and thin paint to proper consistency. Occasionally mix special custom paints
  • Set up and operate electrostatic spray and auxiliary equipment
  • Properly adjust air pressure and gun nozzle to accommodate work to be performed
  • Manipulate gun to cover all required surfaces in smooth, even coats, free from runs or thin spots
  • Allow for sufficient drying between spray coats
  • Perform touch-up work, remove masking, and move completed work to drying, storage areas
  • Perform minor maintenance of equipment, replacing filters, and discarding old ones in a proper manner
  • Clean spray booth, gun, nozzles, and lines
  • Perform specialized electrostatic equipment maintenance duties including requisitioning of supplies, replacement items, or parts
  • Maintain, record time, production, or other required information on proper form
  • Notify supervision of improper operation, faulty equipment, defective materials, and unusual conditions
  • Move materials, pumps, components, or accessories as necessary
  • Maintain work area and equipment used in a clean and orderly condition. Observe all prescribed and standard safety rules and regulations
  • Perform other similar or related duties as assigned or directed
  • Mfg. Experience preferred
  • Experience with spray painting, specifically water-based paint, along with working with various painting equipment is preferred
6

Spray Painter Resume Examples & Samples

  • Trade qualification
  • Basic numeracy/Literacy skills
  • Basic computer skills and or a willingness to learn
  • Able to follow written instructions and procedures
  • Able to perform manual work (Fitness for work)
  • Able to use hand and power tools or a willingness to learn
7

YRK USW Spray Painter Resume Examples & Samples

  • 2 Years of experience or equivalent training required
  • NESHAP certification would be preferred
  • Experience with Heavy Manufacturing Industrial Coatings
  • Knowledge of CARC (Chemical Agent Resistant Coating) Painting (Not required but beneficial)
  • Ability to safely handling solvents and chemicals
  • The ability to adjust paint guns and systems on the fly (adjustments/troubleshoot)
  • Ability to blend paint
  • Ability to read a wet Film Thickness Gage
  • Ability to pass a Pulmonary Function test ; this is required for the Job
  • Ability to identify paint defects and correct them
  • Ability Follow the Work Instructions and clean paint equipment
  • Ability to read and interpret Product Data Sheets
  • Must be able to work in confined spaces
  • Ability to work at various heights
  • Ability to drive vehicles
  • Ability to climb in and out of structures/vehicles
8

Spray Painter Resume Examples & Samples

  • High School Diploma or GED Equivalent from an accredited institution is required
  • Minimum of six (6) months previous spray painting experience is required
  • Must be legally authorized to work in the United States without company sponsorship
  • No relocation provided. Candidates must reside within the 50 miles of the work location in order to be considered
9

Spray Painter Resume Examples & Samples

  • Prepare surfaces to be painted by hand or machine
  • Apply primer and finishing coats using spray guns and rub down surfaces between coats
  • Touch up paintwork and apply polish to vehicles or equipment
  • Remove masking papers before waxing and polishing finished paintwork
  • Paint signs on vehicles or equipment
  • Treat vehicles or equipment with rust-proofing chemicals
  • Ability to assist Vehicle Mechanic in workshop tasking as required
  • Qualification equivalent to Certificate III in Automotive Refinishing Technology
  • Panel Beater experience and forklift licence is preferable
  • Basic knowledge of use and removal of Hazardous Material
  • Demonstrated mechanical aptitude or workshop experience is also preferable
10

Spray Painter Resume Examples & Samples

  • Sprays and/or brushes paints for all types of finishes; applies prime, semi-finish and finish coats using paints, lacquers, enamels, varnishes, undercoats, etc., on a variety of surfaces, checking painted/coated parts against job specifications
  • Obtains job specifications from a variety of readouts and presentations including blueprints, engineering specs, and written and oral instructions
  • Mixes paints, lacquers, and varnishes for correct viscosity
  • Performs visual inspection of all material prior to painting
  • Operates baking oven and monitors temperatures and bake cycle times
  • Plugs and masks work as required
  • Cleans brushes and spray guns
  • Uses all tools and fixtures necessary for the performance of tasks
  • Performs routine equipment maintenance
  • Performs other routine duties as required
  • Experience reading military specs
11

Production Spray Painter Resume Examples & Samples

  • Sets up, operates and maintains spray guns and other painting equipment
  • Prepares part surfaces for application of coating to ensure proper adhesion of the paint, which may include sandblasting and masking of parts
  • References, locates and interprets blueprints, specifications, and work orders
  • Determines from specifications, blueprints or work orders the type and color of primes, paint, protective coatings and/or solution required
  • Mixes and thins paint to proper consistency
  • Locates color break areas, decals and/or insignias and paints or mounts such items per use of customer specifications, blueprints and simple arithmetic
  • Applies primer and matte topcoats to interior and exterior of parts, subassemblies and assemblies
  • Works to required tolerances in the application of finished surface coats
  • Verifies and evaluates thickness and location of painted surfaces for acceptance or rejection of product
  • Performs basic/simple rework and touchup, feathering, shading and blending of primer and matte topcoats by the use of spray gun and brush
  • Maintains full understanding of rework procedures
  • May perform such work incident to work described above, such as touchup, masking, sandblasting, sanding, priming, sealing and surfacing
  • Maintain acceptable labor reporting in BAAN
  • Maintain accurate log entries pertaining to the work being performed and dictated by customer specifications and company SOPs
  • Maintains strict adherence to company SOPs
  • Maintains a high level of 6S involvement
  • Support Lean initiatives by participating in CI events and/or providing ideas for improvements in the area
  • Responsible for the proper handling and management of hazardous waste generated in their work area
  • Acceptable attendance is an essential function of the position
  • Must be willing and able to work overtime as necessary
  • Performs other duties as assigned or required by the position
  • Ability to set up and operate various types and sizes of spray guns, paint mixers, and other painting equipment
  • Ability to use references to obtain easily identified information, to use simple arithmetic, including decimals and fractions
  • Demonstrate the ability to read and interpret mylars/engineering drawings
  • While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms
  • The employee frequently is required to walk and sit
  • The employee is occasionally required to climb or balance; stoop, kneel, crouch, or crawl
  • Must be able to communicate effectively
  • Annual baseline hearing test is required
  • The employee must frequently lift and/or move up to 20 pounds
  • Working conditions are: 100% manufacturing environment
  • Regularly exposed to wet and/or humid conditions and airborne particles
  • Noise level is usually loud
  • Hearing protection must be worn in designated manufacturing areas
  • Fully enclosed shoes of solid, leather construction with a steel or composite toe cap (ANSI Z41 compliant) must be worn in all manufacturing areas
  • Full Ty-vek suit required in restricted areas
  • Supplied air unit required in booth while painting
  • Safety glasses (ANSI Z87 compliant) required in all manufacturing areas
  • 171 Stacey Road