Senior Assembler Resume Samples

4.5 (69 votes) for Senior Assembler Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the senior assembler job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
RP
R Paucek
Robyn
Paucek
456 Abernathy Viaduct
Dallas
TX
+1 (555) 654 7809
456 Abernathy Viaduct
Dallas
TX
Phone
p +1 (555) 654 7809
Experience Experience
04/2014 present
Detroit, MI
Assembler Senior N
Detroit, MI
Assembler Senior N
04/2014 present
Detroit, MI
Assembler Senior N
04/2014 present
  • Perform general housekeeping duties to provide a safe and clean working environment at all times
  • Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality
  • Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation
  • Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting
  • Maintain the coating and dispensing machines to ensure proper operating condition
  • Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes
  • Operate several different types of dispensing and coating machines to meet customer specifications
08/2010 01/2014
Houston, TX
Assembler, Senior
Houston, TX
Assembler, Senior
08/2010 01/2014
Houston, TX
Assembler, Senior
08/2010 01/2014
  • Perform component level inspection and rework
  • Knowledge of AMETEK workmanship standards
  • Work from manuals, drawings, part lists, verbal and written instructions
  • Training through April 30 at Irvine facility. Transportation provided
  • Keeps work area neat and orderly, 6S
  • Performs related duties as assigned
  • Use microscope to inspect, identify faults, assembly errors, and damaged components
06/2004 07/2010
Boston, MA
Senior Assembler
Boston, MA
Senior Assembler
06/2004 07/2010
Boston, MA
Senior Assembler
06/2004 07/2010
  • Establish and maintain effective working relationships with all departments and workers
  • Performs assembly operations using established procedures, work instructions, schematics and/or other approved documentation
  • Communicate internally with contacts outside the work group to exchange work related information
  • Perform other job related duties as assigned by management
  • Actively participates in product development and improvements
  • Performs other related duties as assigned by management
  • Train, assign and check the work of associates
Education Education
Bachelor’s Degree
Bachelor’s Degree
Illinois State University
Bachelor’s Degree
Skills Skills
  • Knowledge of and ability to compute basic arithmetic
  • Knowledge of and ability to use air tools, power tools, and hand tools
  • Knowledge of and ability to use a computer with clear instructions and procedures
  • Ability to write to record basic information
  • Basic mathematic ability to add and subtract fractions, decimals and whole numbers
  • Ability to read tape measures and rulers in increments of 1/16”
  • Strong oral & written communication skills and math skills
  • Effectively communicate and work in a team environment
  • Accurately read and comprehend material such as blue prints, work instructions, routings, OMS sheets, measuring equipment, etc
  • Possess energy, enthusiasm, and positive attitude
Create a Resume in Minutes

7 Senior Assembler resume templates

1

Senior Assembler, Implantable Pumps Resume Examples & Samples

  • 5 years of experience in a manufacturing experience in combined assembly and/or technician work
  • Experience following instructions to assemble/manufacture medical devices
  • Experience operation manufacturing equipment
  • Experience using computers
  • Good interpersonal skills with proven experience to work independently as well as a team member
  • Knowledge in FDA or ISO regulations such as training in Good Manufacturing Practices
  • Technical trade school experience preferred
  • Prior use of simple hand tools and precision measuring equipment
  • Experience maintaining maintenance and quality records in accordance with company guidelines
  • Experience using equipment as resistance and laser welders, pull testers and automated test equipment
  • Experience performing modern basic adjustment and repairs on precision mechanical and electronic devices used in manufacturing and testing
2

Senior Assembler Resume Examples & Samples

  • 1st shift Sr. Assembler
  • Performs electronic, electro-mechanical, mechanical, or similarly related repetitive to non-repetitive production assembly operations related to hardware such as modules, boards, panels, drawers, frames and cables. Includes complex rework, soldering, wiring skills, and testing capability
  • Performs assembly operations using established procedures, work instructions, schematics and/or other approved documentation
  • The individual will have the responsibility and authority to carry out all assigned tasks
  • High school or equivalent education
  • Ability to read and comprehend written work instructions which may be technical in nature
  • Soldering experience and ability to become J-Std certified within the first 30 days of employment (based on work assignment)
  • Ability to lift/move material up to 35 pounds. May be required to work with hazardous materials
  • Proficient in the use of a personal computer to navigate on-line documents, drawings, and instructions
  • Minimum of 6 years of industry or similarly related job experience
  • Prior experience working in a team oriented environment
3

Senior Assembler Resume Examples & Samples

  • Knowledge of ESD and FOD Control
  • Understand and interpret engineering drawings, written instructions, parts lists, and schematics
  • Current IPC-A-610 Acceptability of Electronic Assemblies
  • Current J-STD-001 Soldered Electrical and Electronic Assemblies
  • Current IPC-7711/IPC-7721 Rework and Repair of Electronic Assemblies
  • Familiar with potting and staking compounds
4

Senior Assembler Resume Examples & Samples

  • Must be able to work from written work instructions and follow assembly procedures
  • Minimum of 4 years’ experience assembling passive microwave components
  • Must be able to lift & carry 50 pounds and sit or stand for 4 hours at a time
  • Activities for this position are not limited to the list above
  • Strong oral & written communication skills and math skills
  • Possess energy, enthusiasm, and positive attitude
5

Assembler Senior Resume Examples & Samples

  • Experienced in soldering circuit card assemblies to NASA specification 8739 series
  • Experienced with J-STD-001 and IPC-A-610 specifications
  • Proficient at interpreting drawings, diagrams, part lists, inspection standards, revision control, reference documents and work instructions
  • Certified to NASA specifications 8739.1, 8739.2, 8739.3
  • IPC-A-610 certified
  • Experience with “qualified operator” programs
  • Familiar with Manufacturing Execution Systems
6

Senior Brazer / Assembler Resume Examples & Samples

  • Selects torch tips, flux, and brazing alloys from work station instructions and/or Sequence of Events (SOE) or work orders
  • Applies knowledge of metallurgy to determine best method to accomplish quality braze (brass, copper, steel) and performs all job duties within ISO standards using required safety procedures and equipment in accordance with company policies and practices
  • Knowledge and understanding of lean manufacturing practices alongside experience using small hand and power tools is preferred
  • Exposed to potential hazards including pinch points, fall hazards, chemical exposure and general safety issues associated with manufacturing. Works in hot, cold, dusty, elevated and noisy area
  • Manufacturing Experience is a plus
  • Brazing certification required
7

Senior Assembler Resume Examples & Samples

  • Job duties include but are not limited to
  • Mechanical system test conduct
  • Mechanical system troubleshooting & resolution
  • Conduct maintenance on mechanical systems
  • Mechanical support for craft operations – on ramp & underway
  • Tube/Hose fabrication & assembly, shipfitting, mechanical schematics layouts, hook-ups, and installation
  • Must be able to work from Engineering drawings, sketches, blueprints, schematics and follow written/verbal instructions
  • Perform job duties with the use of basic hand tools such as screw drivers, pliers, wire cutters, drill motors, sand and grinding tools, etc
8

Senior Assembler Resume Examples & Samples

  • Distribute assignments to employees, review and approve APRISO time and attendance data on a daily basis
  • Train new employees and/or current employees on assembling (liner) work procedures or processes as required
  • Ensure employees complete work/assignments or tasks within budget and schedule
  • May personally perform assembling duties as time permits or as required by the critically of the task
  • Ensure work quality adheres to policies, procedures and rules for all assigned employees
  • Maintain records, forms and logs as required
9

Senior Assembler Resume Examples & Samples

  • Minimum 2 years relevant experience in assembly environment
  • Experience in doing sub-assemblies, soldering, and cleaning using chemical solutions
  • Experience in handling Optical components preferred
  • Experience working with and around laser diode based products and systems
  • Comfortable with the use and handling of epoxies and solders
  • Familiarity and experience with ESD protocols in production environment
  • Ability to use standard PC software including MSWord, MSExcel, MSOutlook, etc
10

Senior Assembler, Pcba Resume Examples & Samples

  • Independently uses engineering drawings and standard methods to determine correct sequences of assembly procedures and methodology
  • Works from detailed engineering instructions on assignments
  • Use of small hand tools, fixtures and soldering irons
  • Maintain certified operator certification
  • Observes all safety rules and policies
11

Manufacturing Senior Assembler Resume Examples & Samples

  • Minimum of 2 years experience in related manufacturing environment
  • Knowledge of mechanical and electro-mechanical functions, advanced laws of electricity, microprocessor and analog systems preferred
  • Ability to read and understand blueprints, schematics and assembly procedures
12

Assembler Senior Resume Examples & Samples

  • One year experience in IPC-620 or graduate from certified school
  • Experienced with working in an Electro Static Discharge (ESD) environment
  • Experienced with working with hand tools
  • Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
  • Use of manual and automatic wire strippers
13

Mid / Senior Assembler Resume Examples & Samples

  • Work under general supervision with detailed instruction for new work or a special assignment
  • Responsible for performing a wide variety of repetitive or standard electronic and /or mechanical assemblies and subassemblies
  • Determines and/or follows methods and sequence of operations in performing assembly tasks such as wiring, component installation, hand soldering and cable harnessing on assembly units
  • Typical requires a high school diploma or equivalent and three or more years experience
  • Assembles components, assemblies or sub-assemblies; makes setups and adjustments holding tolerances to specifications; perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards, or may perform mechanical assembly of panels, LRU’s, batteries, and servo motors; may disassemble, modify, rework, and reassemble assemblies or subassemblies
  • Use a variety of torque tools, precision measurement tools like calipers, micrometers and depth indicators
  • Experience with IPC, ISO and soldering skills are preferred
  • Ability to obtain or maintain a DoD Security Clearance is required
14

Assembler, Senior Resume Examples & Samples

  • Work from manuals, drawings, part lists, verbal and written instructions
  • Perform RF cable coaxial assemblies
  • Final assembly of RF / microwave system
  • Wire harness assemblies for prototype of RF / microwave
  • Perform component level inspection and rework
  • Use microscope to inspect, identify faults, assembly errors, and damaged components
15

Senior Assembler Resume Examples & Samples

  • Perform electrical and mechanical assembly of a complicated nature
  • Promote a positive work atmosphere through interacting with fellow team members
  • Ability to perform advanced math
  • Knowledge of mechanical and electronic functions
  • Knowledge and experience with wide variety of hand and powered tools
16

Senior Rework Assembler Resume Examples & Samples

  • Performs simple and complex repair/replacement of surface mounted parts such as inductors, caps and resistors on circuit boards
  • Reviews and interprets complex assembly drawing, work instructions, blueprint specifications, parts lists, diagrams and schematics
  • Resolves minor assembly problems by altering component dimensions to conform to specifications
  • Verifies that all components are attached to specification and functional to requirements
  • Documents repair and modification actions on all required paperwork/in databases
  • Salvages components and scrap for recycling or reuse
  • All other duties as requested
17

Assembler Senior N Resume Examples & Samples

  • Experience working in a LEAN Manufacturing environment
  • Strong leadership, mentoring and training aptitude
  • IPC-610 Certification
  • IPC J-STD-001 Certification
18

Assembler Senior Resume Examples & Samples

  • Provide a quality product that meets the customers’ needs
  • Work in a timely manner
  • Stage tagged parts
  • Inspect panels
  • Fill out all paper work correctly and accurately
19

Senior Assembler Resume Examples & Samples

  • Reviews prints and helps with planning of layout of skids
  • Sets vessels and major equipment on skids
  • Must be able to hang bottles, install welded pipe, install fuel filter, mount oil cooler, make supports and braces, air test system, set scrubbers, install pumps, tack welding, surge tank, upper structure, install exhaust/muffler and set process cooler
  • Develops and trains entry and intermediate level assemblers
  • May assist with bending tubing 1/4" to 1" carbon or stainless steel
  • Understands basic blueprints
  • Minimum 5 years industrial experience
  • Tack welding experience
20

Senior Assembler Resume Examples & Samples

  • Reads shop notes, general arrangement and process flow diagrams and drawings
  • Reads measuring devices such as tape measures, rulers and pressure gauges
  • Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards
  • Performs pneumatic and mechanical tests on assembled components
  • Disassembles components to replace defective parts or to prepare them for shipping
  • Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders
  • Operates stationary tools such as bench grinder, iron worker, drill press and chop saw
  • Operates lifting equipment such as overhead cranes and jib cranes
  • Records serial numbers and other information as required in ITP (inspection test plan)
  • Reports problems to line supervisor and actively participates in resolutions
  • Perform job duties in a safe manner and according to company safety procedures
  • Reports potential safety hazards to supervisor and actively participates in resolutions
  • Effectively follows oral and written instructions and communicates them to others as needed
  • Establish and maintain effective working relationships with all departments and workers
  • Actively participates in teaching and developing other employees
  • Actively participates in product development and improvements
  • Occasionally fills in as backup Assembly Lead
  • Performs the above and other duties as required without supervision
  • High school education (GED)
  • 3 - 4 years’ experience in compression related assembly or field environment
  • Ability to read tape measures and rulers in increments of 1/16”
  • Basic mathematic ability to add and subtract fractions, decimals and whole numbers
  • Must have knowledge of commonly-used concepts, practices, and procedures within the assembly department
  • Must be familiar with Safety and OSHA requirements
21

Trinityrail Oem-senior Heavy Assembler Resume Examples & Samples

  • Utilizes mechanical fastening (bolts, nuts, hucks)
  • Utilizes hand tools to bend
  • Work at heights up to 25 feet using a restraint harness
  • Read and follow blue prints
  • Must Tack Weld
  • Performs Error Testing
  • Lifting over 40 pounds frequently
  • Typically has 2 - 4 years of related experience
  • Previous experience in a manufacturing environment is a plus!
  • Day Shift (6AM-4:30PM)
22

Senior Work Cell Assembler Resume Examples & Samples

  • Works from schedules, shop orders, product/process spec sheets, blueprints, and test instructions which are written or on the computer
  • Reviews production schedules for specific periods and arranges for parts, materials, supplies, tooling, gauges, and other equipment to meet production requirements
  • Releases blanket orders and passes Kanban cards to both external and internal vendors
  • Makes electrical connections and solder, rivets, stakes or press to secure parts into products where sequence of operations are generally prescribed, but substantial freedom as to order is left to assembler
  • Accumulates and moves items between storage areas and work cell
  • Troubleshoots and corrects all malfunctions
  • Uses and understands various computer screens to check a part’s bin location, status of material, production orders
  • Fills out non-conforming ticket and processes non-conforming material disposition (including deleting components out of inventory in computer system)
  • Uses hand and power tools, pallet jacks, hand trucks, fixed gauges, jigs, meters, soldering irons, microcomputer, fax machine, riveters, and presses
  • Performs preventative maintenance (cleaning, oiling, inspecting, and minor adjustments) on equipment in the work cell
  • Follows safety rules and keeps work cell area in a clean and orderly condition
23

Senior Electromechanical Assembler Resume Examples & Samples

  • 5+ years’ experience in electro-mechanical systems production and test
  • Ability to read and interpret schematic diagrams, mechanical assembly drawings, calibration procedures
  • Troubleshooting and problem solving skills
  • Able to layout equipment wiring, breadboard circuitry and cable assemblies
  • Knowledge of electrical and electrical component identification and function
24

Assembler Senior N Resume Examples & Samples

  • Ability to read and interprets prints, labeling diagrams and mixing ratios
  • Operate several different types of dispensing and coating machines to meet customer specifications
  • Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting
  • Inspect assemblies to ensure proper coating coverage
  • Maintain the coating and dispensing machines to ensure proper operating condition
  • Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality
  • Transport racks of circuit boards from one destination to another to continue the manufacturing process
  • Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation
  • Perform general housekeeping duties to provide a safe and clean working environment at all times
  • Knowledge of various materials used
  • Must complete applicable Specific Function Training courses
  • Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements
  • Encapsulation of discrete assemblies
  • Replenishes chemicals, solvents, compounds, process fluids as required, including dispensing into secondary containers and chemical cleaning
  • Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes
  • Advances or retrieves product, material, and tools in house and from local suppliers for self and others
25

Senior Assembler Resume Examples & Samples

  • Perform a range of operations that include assembling and adjusting various types and styles of product from start to finish
  • Test completed units and inspect parts for quality
  • Prepare units for shipping with proper documentation
  • Use a spot welding machine
  • Communicate internally with contacts outside the work group to exchange work related information
  • Support communications between management and operations
  • Serve as a resource to others in the resolution of complex problems and issues
  • Train, assign and check the work of associates
  • 2-3 years of experience in assembly; high school diploma or equivalent a plus
  • Effectively communicate and work in a team environment
  • Accurately read and comprehend material such as blue prints, work instructions, routings, OMS sheets, measuring equipment, etc
  • Ability to write to record basic information
  • Knowledge of and ability to compute basic arithmetic
  • Knowledge of and ability to use a computer with clear instructions and procedures
  • Skill and ability to place material in, or remove them from machines. Start, stop, and observe the functions of machines or equipment. Adjust materials or controls of a machine such as changing guides, setting timers, clearing jams, and adjusting switches to maintain performance. (Replace material, fill bins or supply conveyors, etc.)
  • Knowledge of and ability to use air tools, power tools, and hand tools
  • Knowledge of and ability to solve unique problems that are diversified and involved. Judgment is required to adapt standard practices and principles to meet new conditions