Product Manufacturing Engineer Resume Samples
4.5
(101 votes) for
Product Manufacturing Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the product manufacturing engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
NP
N Pacocha
Newton
Pacocha
17903 Maryam Motorway
Chicago
IL
+1 (555) 294 5509
17903 Maryam Motorway
Chicago
IL
Phone
p
+1 (555) 294 5509
Experience
Experience
Chicago, IL
Product Manufacturing Engineer
Chicago, IL
VonRueden-Koelpin
Chicago, IL
Product Manufacturing Engineer
- Helping development of proposals, statements of work, work breakdown structures and cost estimates for complex equipment
- Generate ideas for cost savings, quality improvements, and cycle time reduction opportunities. Manage projects and execute ideas to completion
- Supports the Quality Management System (QMS) policies and procedures. Develops, documents, and trains step by step method sheets and work instructions
- Perform product/process statistical analysis for cost reduction, quality improvement and improved efficiency
- Leads improvement of unit cost management including Cost Savings, Quality Measures, Product Cost, Productivity, Escapes and First Pass Yields
- Plan, deploy, monitor and control improvements including supplier initiatives to drive product and process improvements
- Drive improvement of unit cost management including Cost Savings, Quality Measures, Product Cost, Productivity, Escapes and Rolled Throughput Yields
San Francisco, CA
New Product Manufacturing Engineer
San Francisco, CA
Crist, Brown and Hahn
San Francisco, CA
New Product Manufacturing Engineer
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to new product introductions
- Conduct product costing studies, monitoring cost targets, and leading cost reduction initiatives
- This position will work with a global team of five to eight Design, Marketing, Manufacturing, and Finance personnel
- Identify, develop, and implement manufacturing procedures and processes for new product
- Support new product introductions in manufacturing plants
- Support or lead value stream mapping initiatives
- Recommend alternative designs to ease in manufacturing of product
present
New York, NY
New Product Manufacturing Engineer, Senior
New York, NY
Frami-Oberbrunner
present
New York, NY
New Product Manufacturing Engineer, Senior
present
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to assemblies/modules
- Control change using the change management process (Supplier Problem Sheets, Engineering Specification Waiver, Engineering Change Order)
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers
- Creates Manufacturing strategies & Manufacturing sequences
- Assists in determining root cause analysis for issues that arise during assembly and/or test of new products
- Documents product-related issues/enhancement opportunities. Assists in determining root cause analysis.
- Leads the manage build process. Works with stakeholders to close and/or disposition issues documented via manufacturing NC, field NC, and SPS
Education
Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
Auburn University
Bachelor’s Degree in Engineering
Skills
Skills
- Knowledge of consumer goods and the Golf/Sporting Goods industry
- Able to demonstrate the ability to work, and deliver, under own initiative
- Demonstrated ability of initiative; able to work effectively in a cross-functional team environment
- Good interpersonal team working skills with the ability to influence all stakeholders (inc customers and suppliers)
- Strong working knowledge of information systems, including Microsoft Word, Excel, and Outlook
- Strong communication and interpersonal skills to enable coordination of projects within departments and outside consultants
- Strong interpersonal skills in order to effectively coordinate project cross-functionally and with vendors
- Capable of efficiently integrating existing methods with new innovations
- Good technical English language and net-working skills
- Knowledge of computational tools including CAD, FEA, Programming Languages
15 Product Manufacturing Engineer resume templates
Read our complete resume writing guides
1
Product Manufacturing Engineer, Metalwoods Resume Examples & Samples
- Metal Fabrication experience highly preferred
- Collaborate with cross-functional teams including: Design, Development, Marketing, Sourcing, and Asia Manufacturing teams
- Recommends and implements improvements to production processes, methods, and controls
- Perform product/process statistical analysis for cost reduction, quality improvement and improved efficiency
- B.S. in Mechanical Engineering
- 5 years of experience working in a manufacturing/engineering environment with a working knowledge of Metal Fabrication, DOE, Process Optimization, FMEA and Supplier Relations
- Knowledge of cosmetic finishing processes including Plating, PVD, Painting, Powder Coating, Abrasive Polishing, and Media Blasting a plus
- Knowledge of consumer goods and the Golf/Sporting Goods industry a plus
- Knowledge of manufacturing tooling and fixture design/inspection a plus
- Strong communication and interpersonal skills to enable coordination of projects within departments and outside consultants
- Must be able to travel to Asia at least 2 times per year for minimum 2 week duration
2
Product Manufacturing Engineer Resume Examples & Samples
- Metal Manufacturing experience highly preferred
- Experience troubleshooting manufacturing failures using sound engineering problem solving
- Responsible for manufacturing execution to ensure product performance, conformance, durability, quality, and cost efficiency
- Project and schedule management from prototype through production
- Development of manufacturing instructions using manufacturing engineering practices
- Production support for component assembly
- Performs other related duties and assignments as required
- B.S. in Mechanical, Manufacturing, or Materials Engineering
- 3 - 7 years of experience working in a manufacturing/engineering environment with a working knowledge of metal manufacturing, DOE, process optimization, FMEA and supplier relations
- Knowledge of fabrication methods including Casting, Forging, Forming, Machining, Stamping, and Injection Molding a plus
- Self-Motivated having demonstrated initiative toward professional and personal growth
- Capable of efficiently integrating existing methods with new innovations
- Must be able to travel to Asia at least 2+ times per year for minimum 2 week duration
- Fluency in Mandarin and/or Vietnamese a plus
3
Product Manufacturing Engineer Resume Examples & Samples
- Studii: Absolvent universitate tehnica (ex: Universitatea Politehnica)
- Bune cunostinte despre procese de asamblare/prelucrari mecanice din industra auto
- Cunostinte legate de asigurarea calitatii
- Minim 3 ani de experienta in productie/ coordonare proiecte
- Flexibilitate, foarte bune abilitati de comunicare
- Spirit de echipa
- Fluenta in Engleza / o a doua limba straina de circulatie europeana va fi un plus
4
Product Manufacturing Engineer Resume Examples & Samples
- Management and ownership of manufacturing production technology and innovation
- Collaboration with R&D and Manufacturing to facilitate world class product manufacturing processes
- Manage core manufacturing KPI’s in the areas of Quality (FPY, ECBD, ECAD), Cost (CIP, VAM, LIO) and
- Delivery (equipment utilisation/efficiency)
- Key stakeholder in the manufacturing production elements of the New Product Introduction (NPI) process and Product Lifecycle Management (PLM), and Active Management of the Change Control Process for Product Engineering activities – Previous use of Teamcenter here would be greatly beneficial although training can be provided where necessary
- Adherence to employment laws, company rules and regulations (work safety, working times, information security, 5S, company values, etc) and all elements of Essential Health and Safety are both supported and cascaded
- Management and Continuous Improvement of Existing Products and Assembly Processes
- Active support of Cell Leaders and Continuous Improvement teams and help develop new ideas and improvements within the final assembly department to ensure production cells are operated at an optimum efficiency and performance, whilst embracing 5S and EH&S
- Perform root cause analysis on production issues using A3/8D problem solving techniques
- Cost reduction through standard time and process improvements
- Creation and maintenance of Work Instructions / Standard Operating Procedures
- Support the Quality team in the development of process FMEAs
- Support the Lean Cell Design process to develop new Cell / Factory layouts in line with capacity requirements and the Manufacturing strategy
- Manage contractors for installation of new / modified lines or modifications and repair to current final assembly equipment
5
Product Manufacturing Engineer Resume Examples & Samples
- Coordination of all tooling/prototypes/first articles/activities and subsequent evaluation through manufacturing and testing using all available resources
- Establish and maintain constant email communication with outside vendors to clarify specifications, instructions, projects, directions, etc. as needed
- Generate documented reports, test data summaries, charts, graphs, conclusions, and supporting files to Engineering Management in support of supplier/R&D development activities
- Assist in ensuring that accurate and controlled documents/specifications are generated for new product designs and manufacturing processes
- Participate in the manufacturing execution of products to ensure product performance, conformance, durability, quality, and cost efficiency are within desired product specs
- Evaluate and contribute to the design of test equipment, set-up/test procedures, and inspection processes
- Participate regularly and implement process improvements to production processes, process qualification, testing methods, test equipment, and in engineering qualification
- Perform and distribute Engineering Changes and other modifications to documentation in a controlled manner
- Lead and direct activities to ensure component measurement and data integrity, both with supplier in-process testing and in Ball Engineering testing labs
- Collaborate with cross-functional teams including: Product Design, Product Marketing, Sourcing, Research & Development, and Asia Manufacturing teams
- Performs other related responsibilities and assignments as required
- Strong working knowledge of information systems, including Microsoft Word, Excel, and Outlook
- Fluent in English (written and verbal) and ability to communicate effectively throughout the organization
- Demonstrated technical problem solving and critical thinking abilities
- Demonstrated organization skills and ability to work accurately with large amounts of data and details and able to multi-task effectively with periodic supervision and direction
- Strong interpersonal skills in order to effectively coordinate project cross-functionally and with vendors
- Demonstrated ability of initiative; able to work effectively in a cross-functional team environment
- Knowledge in principles of test equipment and methods, experimentation, mfg. documentation, and design control
- Proven ability to identify production and equipment problems; recommend and implement appropriate solutions using sound engineering practices
- Ability to efficiently integrate new innovations into existing methods and processes
- Knowledge and experience in injection molding manufacturing and tooling preferred
- Knowledge of cosmetic finishing processes including, Painting, Ink Stamping, and Media Blasting a plus
- B.S. in Industrial, Manufacturing, Materials, or Mechanical Engineering or related discipline
- 0-3 years of experience working in a manufacturing or engineering environment with an understanding of Lean Manufacturing, Process Optimization, Six Sigma, and/or experience with off-shore manufacturing
- Experience / Knowledge of Engineering Statistics and SPC a plus
- Experience in Golf/Sporting Goods industry a plus
6
New Product Manufacturing Engineer Resume Examples & Samples
- Estimates manufacturing costs, determines time standards and makes recommendations for tooling and process requirements. Uses DFx principles to reduce manufacturing and/or product costs, and improve delivered product quality
- Determines root cause and corrective action analysis for issues that arise during assembly and/or test of systems; provides failure analysis report as required
- Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product Development
7
New Product Manufacturing Engineer Resume Examples & Samples
- Estimates manufacturing cost, determines time standards and makes recommendations for tooling and process requirements. Leads team in the use of DFx principles to reduce product costs and improve delivered product quality
- Evaluates work methods, procedures and policies. Develops and maintains new business processes; edits as necessary to ensure current practices are documented. Mentors and trains lower level engineers
- May coordinate outsourcing activities with external / internal suppliers
- Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
8
Product Manufacturing Engineer Resume Examples & Samples
- Bachelor in Materials, Chemical, Mechanical, Aerospace, Industrial Engineering, Or Engineering Technology discipline
- Minimum 4 years APQP/ DMAIC experience
- Process Control experience
- Production and/ or Manufacturing engineering experience
- Implementation and/or maintaining documentation experience
- Six Sigma Black Belt or LEAN Expert preferred
- Highly Motivated Self-Starter Effective time management skills to meet deadlines
- Demonstrated experience in machine control or process development and data acquisition, project management, APQP principles, and statistical analysis
- Demonstrated experience in progressively challenging and Responsible roles
9
Product Manufacturing Engineer Resume Examples & Samples
- Bachelor in Materials, Chemical, Mechanical, Aerospace, Industrial Engineering, Engineering or Engineering Technology
- Minimum 2 years Production or Manufacturing Engineering Experience
- Process Control experience desirable
- High temperature furnace experience
- CNC programming experience
- Six Sigma Green Belt preferred
10
Product Manufacturing Engineer Resume Examples & Samples
- Minimum 4 years Industrial Controls and/or Networking Experience
- Networking experience (Cisco preferred)
- PLC or Controls Programming experience preferred
- Exposure to Industrial Networking Standards (ISA SP99, NIST) preferable
- C#, C++, Visual Basic programming experience desirable
- Demonstrated experience in progressively challenging and responsible roles
11
Product Manufacturing Engineer Resume Examples & Samples
- Delivers the manufacturing process and tooling system that is capable of meeting all regulatory, internal and external requirements
- Determines the most effective and economical method of manufacturing whilst meeting all the requirements
- Compilation of process planning for the defined area
- Development of the manufacturing system through process and tools to deliver a conforming product
- As required, assist and advice on the instruction of new products, and/or modifications to existing products and associated tooling
- Assist in the definition of manufacturing facilities and equipment requirements. Providing support for the introduction of new facilities and equipment
- Drive and participate in problem resolution, support problem definition, customer containment, root cause analysis, corrective and preventative actions
- Assist and advise on the implementation of key projects and/or CI programs
- Develop the required control plans to confirm conformance and capability
- Good interpersonal team working skills with the ability to influence all stakeholders (inc customers and suppliers)
- Ability to manage and to coordinate internal/external customer requirements
- Achieving delivery to time, cost and quality
- PC literate – MS Office programs
- Flexible and capable of working in a complex environment
- Functional Success Profile:-
- Good technical English language and net-working skills
- Able to travel as required
12
Product Manufacturing Engineer Resume Examples & Samples
- Take ownership for deliverables and collaborates with internal stakeholders, ensuring productivity enhancement and execution excellence
- Owns the production Data Acquisition/Control Systems and will be responsible for the system from the Operator interface, to the machine application codes, to the data retrieval and storage
- Improve and update PLC hardware and software for process I/O on production equipment
- Ensure machine HMI is adequate and effective
- Modify the HMI to facilitate Poke Yoke and process reliability
- Responsible for the interface software and data storage system for all process control data
- Responsible for creating and maintaining a system for revision change control on all automated programs
- Promote a culture of customer centricity, innovation and continuous improvement in people, technical and process capability development using Six Sigma tools
13
Senior Product Manufacturing Engineer Resume Examples & Samples
- Utilize manufacturing process and methods used to produce aerospace components from high temp alloys to include both conventional and non-conventional machining processes using Fanuc, Heidenhain, & Siemens controllers
- Build electronic process work instructions and operation sheets utilizing step by step descriptions as well as 2D illustrations
- Write and modify CNC programs manually by using CAD/CAM software, solid models, and 2D part drawings
- Troubleshoot manufacturing issues and implement continuous improvements
- Determine tooling needs & fixture design criteria while maintaining close feedback with manufacturing to develop robust manufacturing processes
- Train technicians and operators on processes and equipment
- Takes ownership for project deliverables and collaborates with internal stakeholders, ensuring process capability and execution excellence
- Lead cross-functional projects to analyze product requirements and design manufacturing processes to meet those requirements using DMAIC methodology and Six Sigma Tools
14
Product Manufacturing Engineer Resume Examples & Samples
- Design, develop and validate manufacturing processes and tooling for production group
- Train line leaders/operators, monitor yield and efficiency of the product and processes to optimize margin and through put of the products
- Perform failure analysis, initiate corrective and preventive action plan and communicate with customer in timely manner
- Review/analyze product specification and develop product manufacturing documentations
- Educate and train production team in product manufacturing
- Analyze failed units and establish quality control measures
- Demonstrate behavior consistent with the Company’s Code of Ethics and Conduct
- It is the responsibility of every OSI Optoelectronics employee to report to their manager or a member of senior management any quality problems or defects in order for corrective action to be implemented and to avoid recurrence of the problem
- BS in Engineering, Electrical or Electronics
- 2+ years of experience in semiconductor product manufacturing or related field
- Knowledge of AutoCAD is preferred
- Ability to travel within the US and internationally up to 10%
- Must be US Persons based on ITAR definition (US Citizen or Permanent Resident)**This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of U.S. regulations
15
NPI, New Product, Manufacturing Engineer Resume Examples & Samples
- Design review and process development
- Product/Manufacturing documentation, change management
- NPI Manufacturing support
- Sustaining support
- Bachelors degree in Mechanical Engineering or Manufacturing Engineering
- 10 years Manufacturing Engineering / Process Engineering experience
- Experience in Solidworks/Solid Modelling
16
New Product Manufacturing Engineer, Senior Resume Examples & Samples
- Working knowledge of NPME role. Under guidance of management, develops, implements, and releases new product BOMs for medium complex assemblies and product structure. Works with senior NPME to implement new product manufacturing, test, and sourcing strategies
- Develops and validates Operation Method Sheets (OMS) for medium complex assemblies
- Documents product-related issues/enhancement opportunities. Assists in determining root cause analysis
- Leads the Managed Build process for assemblies/modules
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to assemblies/modules
- Explains complex information to others in straightforward situations
17
Product Manufacturing Engineer Resume Examples & Samples
- Provide primary technical support for one or more disciplines in Chemical Processing, Plating and / or Coating
- Assist in projects targeting New Product Introduction, productivity, cost, inventory, First Pass Yield, Cost of Poor Quality, cycle time and turn time
- Plan and implement process development steps needed for New Product Introduction
- Support Process and Quality Audits
- Participate as required to develop process capacity models, analyze gaps and recommend equipment, layout or manning solutions
- Acquire necessary funds appropriations, implement project management and installation
- Generate and maintain all technical flowdown documentation and work instruction ensuring compliance to blueprints, all applicable specifications, Nadcap and other requirements
- Generate and maintain all technical training and testing material required of shop floor operators. Conduct any required technical training, testing and certification
- Provide equipment and maintenance support offering solutions for upgrades in technology, automation or improving maintainability and machine uptime
- Ensure technical compliance with HS&E, OSHA regulations and requirements
- Work within the Honeywell Quality systems and procedures and with cross functional support organizations to ensure compliance to Honeywell SP-001
- Acquire certification as a Honeywell Source Certifying Agent in one or more disciplines
18
Product Manufacturing Engineer Resume Examples & Samples
- Create, revise, review, and approve manufacturing work plans, manufacturing blueprints, tool & method sheet
- Act as a single point of contact to resolve technical-related manufacturing problems and ensure a smooth flow of hardware through manufacturing operations to meet COE goals
- Interface with teams to develop and drive effective RCCAs through Rapid Problem Solving process
- Coordinate tooling design activity with outside suppliers and monitors progress to assure that the shop needs and cost targets are met
- Engage and support HOS processes such as tiered accountability, standardized work, RPS, CI, and 5S
- Review, revise, and write work instructions related to programming and manufacturing
- Generate ideas for cost savings, quality improvements, and cycle time reduction opportunities
- Manage projects and execute ideas to completion
- Interface with AME OPS and ISC team to
19
Product Manufacturing Engineer Resume Examples & Samples
- Entails Integrating algorithms into data acquisition and reduction programs and storing test data in databases for statistical analysis
- Helping development of proposals, statements of work, work breakdown structures and cost estimates for complex equipment
- Helping define the technical roadmap for the group is expected, along with implementing any changes in support of the roadmap
20
Product Manufacturing Engineer Resume Examples & Samples
- Minimum Education requirements: Bachelor's Degree in Mechanical/Electrical Engineering
- Minimum of two years' working experience: professional work experience and or internships with Electronic or Automotive Suppliers
- Open to unscheduled travel to support business needs
21
New Product Manufacturing Engineer Resume Examples & Samples
- With management supervision, develops, implements, and releases new product BOMs for moderately complex assemblies and product structure. Works with senior NPME to implement new product manufacturing, test, and sourcing strategies
- Develops and validates Operation Method Sheets (OMS) for moderately complex assemblies
- Partners with Sr NPMEs in 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals
- Partners with Sr NPME to log change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs)
22
Product Manufacturing Engineer Resume Examples & Samples
- Act as a liaison between the production floor and customers, suppliers, design engineering, test services, purchasing, leadership, etc., on quality and technical issues
- Improve production processes using 6-sigma methodologies in order to achieve ISC goals. Tools include, but are not limited to: Process Maps; FMEAs; PFMEAs; Scorecards; Test Cones; Fish-bone Analyses; DOEs, and QFDs
- Establishes and applies methodology to new concepts and recommends enhancements to advance projects and processes
- Identifies and proposes technical improvements using engineering knowledge and principals
- Specify test tooling needed to support production operations
- Disposition non-conforming material and provide Root Cause and Corrective Action and data reporting on quality issues
- Review incumbent test solutions against current “best-in-class” practices. Improve where warranted
- Communicates any non-compliance and the results of any internal project audits to pertinent parties
- Facilitate supplier involvement on test and quality issues
- Define Assembly & Test flow and layout for production floor
- Determine Production Capacity and ensure adequacy of test solutions
- Review and approve test equipment designs and other New Product Introduction exit criteria
- Provide technical support and leadership for lean, kaizen and HOS initiatives
- Bachelor’s degree in Electrical, Mechanical, or Industrial Engineering
- 5 years experience in manufacturing engineering
- Strong Knowledge of Assembly, Test, Quality, and Manufacturing Methodologies
- Ability to troubleshoot electrical/mechanical assemblies to the component level
- Good verbal and written communication skills and experience in technical procedure development
- Good interpersonal skills and able to communicate effectively with all levels of the organization
- Green Belt Certification (Black Belt preferred)
- Lean Expert Certification and/or Lean experience in a manufacturing environment
- Project Leadership skills preferred
- Candidates need to be controlled goods clearable
23
Product / Manufacturing Engineer Resume Examples & Samples
- Develop manufacturing estimations for new products
- Coordinate the project team
- Define manufacturing steps based on product design
- Define required investment based on manufacturing concept
- Cross check equipment availability when defining required investment
- Define required headcount based on the manufacturing concept
- Create product quotation based on the manufacturing estimation
- Drive the safe launch of the new products by coordinating the project team, respecting the defined milestones and the financial requirement
- Maintain/improve the product profitability throughout product’s lifetime, until EOP
- Capacity studies
- Manage product modification (ECM)
- Propose technical improvement activities
- Monitoring/improving project’s specific KPI’s
24
New Product Manufacturing Engineer Resume Examples & Samples
- Interfaces with Engineering functions to coordinate the release of New Products or/and product improvements. Owns Module/Product on PLC/CIP Program
- Supports New Product documentation by OMS Creation for NPI/CIP Builds
- Participates in preparation of concept and feasibility studies
- Requires strong skills in Product technology, Ccange management, problem solving, communication skills, customer orientation, personal effectiveness, team skills, and quality
25
Product Manufacturing Engineer Resume Examples & Samples
- Generate ideas for cost savings, quality improvements, and cycle time reduction opportunities. Manage projects and execute ideas to completion
- CNC manufacturing process development and improvement for multi-axis machines
- CNC manufacturing fixture design for multi-axis machines
26
Product Manufacturing Engineer Resume Examples & Samples
- Leads and coordinates activities between Product Engineering, Operations, AME, and Quality and Manufacturing Assurance team. Identifies and analyzes product opportunities / issues
- Plans, deploys, monitors and controls improvement including Supplier initiatives to drive product and process improvements
- Supports Customer communication to ensure and improve Product Quality and delivery
- Proactively integrates functional interaction such as supplier quality assurance, transitions, material productivity, and cost reductions
- Supports AME and NPI Engineers. Utilizes Six Sigma and Design for Manufacturing (DFM) tools to drive product and process improvement. Ensures technical compliance with HS&E, OSHA regulations and requirements
- Leads improvement of unit cost management including Cost Savings, Quality Measures, Product Cost, Productivity, Escapes and First Pass Yields
- Drives deployment of Built in Quality, leads the reduction in quality escapes, Cost of Poor Quality (COPQ), and Materials Review Board (MRB) utilization
- Participates with the New Product Development (NPD) Engineers and the Integrated Product Delivery and Support (IPDS) process (Phase 1-5) for product transition into manufacturing including supporting the sign-off approval process
- Responsible for Phase 6 programs including identification of Manufacturing Readiness Level (MRL) gaps
- Supports the Quality Management System (QMS) policies and procedures. Develops, documents, and trains step by step method sheets and work instructions
- Ensures correct tooling and factory test equipment are available and in use
- Supports all internal and regulatory audits as required
- Also identifies Root Cause Corrective Actions using processes such as Corrective Action Mistake-Proofing (CAMP)
- Drives changes to Design Engineering regarding issues impacting product integrity
- Responsible for analysis and identification of capital equipment needs to address gaps in capacity, including appropriation request (AR) creation, process management and installation
- Responsible for adherence to department Burden, Tooling and Momentum budgets
- Executes and manages projects (such as cost reduction, transitions, etc.) and allocates funding as appropriate
- Coordinates resources to align with project and factory needs
- Responsible for identifying alternate solutions to mitigate quality and schedule risk
- Provides technical leadership to ensure improvements or achievement of AOP in the following: On-Time Delivery, PPM, Escapes, Cycle-time Reduction, First Pass Yield, Turn Around Time, Inventory Reduction, COPQ and Safety
- Supplier Quality engineering responsibilities to ensure product quality and delivery
27
Product Manufacturing Engineer Resume Examples & Samples
- Drive overall product and process improvements using the DMAIC producibility operating system
- Plan, deploy, monitor and control improvements including supplier initiatives to drive product and process improvements
- Able to manage small projects and provide work direction and mentoring to Product Engineering Technicians
- Drive built in quality, reduction in quality escapes, Cost of Poor Quality (COPQ), and Materials Review Board (MRB) utilization for assigned areas of responsibility
- Support the Quality Management System (QMS) policies and procedures
- Develop, document, and train operators on work instructions (SOS - Standard Operating Sheets) for assigned process steps
- Ensure correct tooling and factory test equipment are available and in use
- Identify and implement Root Cause Corrective Actions using processes such as Corrective Action Mistake-Proofing (CAMP). Participate in developing cause chains to determine real issues and cause
- Provides data for analysis and identification of capital equipment needs to address gaps in capacity
- Manage approval, quotation, ordering, and installation processes
- Provide technical guidance to ensure improvements or achievement of AOP in the following: On-Time Delivery, PPM, Escapes, Cycle-time Reduction, First Pass Yield, Turn Around Time, Inventory Reduction, COPQ and Safety
- Participates with the New Product Development (NPD) Engineers and the Integrated Product Delivery and Support (IPDS) process (Phase 1-5) for new product introductions
28
Product Manufacturing Engineer Resume Examples & Samples
- Proactively integrate functional interaction such as supplier quality assurance, transitions, material productivity, and cost reductions
- Able to manage projects and provide work direction and mentoring to other Engineers and Product Engineering Technicians
- Utilizes Six Sigma Plus, Design for Manufacturing (DFM) tools to drive product and process improvement
29
Product Manufacturing Engineer Manager Resume Examples & Samples
- Responsible for coordinating activities between Product Engineer, Operations, Product Support Engineering (PSE), design engineering, and Quality Assurance teams. Identify and analyze product opportunities / issues
- Plan, deploy, monitor and control site-level improvement initiatives using DMAIC producibility operating system to drive product and process improvements
- Support Customer and Supplier communication to ensure and improve Product Quality and delivery
- Coordinate activities with support functions such as sourcing, HR, finance, HS&E, etc
- Ensuring resource availability as required, proactively integrate functional interaction such as supplier quality assurance, transitions, material productivity, cost reductions. Support AME and NPI Engineers
- Utilize Six Sigma Plus, Design for Manufacturing (DFM) tools to drive process improvement
- Strong knowledge of Lean Manufacturing and Honeywell Operating System (HOS)
- Ensure Labor Productivity, Product Producibility, IIOT, and Process Automation projects are managed to schedule and budget with an effective Management Operating System – MOS
- Ensure estimated savings are realized
- Lead/responsible for overall improvement of unit cost management including Cost Savings, Quality Measures, Product Cost, Productivity, Escapes and First Pass Yields
- Demonstrate people management skills including talent development, coaching and developing high performance teams, communication, knowledge transfer, leadership skills with ability to influence and provide leadership, and provide project management skills with the ability to close initiatives on time and within budget
- Lead the reduction in quality escapes, reduce Cost of Poor Quality (COPQ), and improve Rolled Throughput Yield (RTY). Participate with New Product Development (NPD) Engineers and the Integrated Product Delivery and Support (IPDS) process (Phase 1-5) for product transition into manufacturing including supporting the sign-off approval process
- Responsible for Phase 6 programs including Manufacturing Readiness Level (MRL) gap closure plans
- Ensure compliance to the Quality Management System (QMS) policies and procedures
- Own and maintain the strategy for tooling, and factory test equipment. Support all internal and regulatory audits as required
- Identify Root Cause Corrective Actions using processes such as Corrective Action Mistake-Proofing (CAMP)
- Responsible for analysis and identification of capital equipment needs to address gaps in capacity
- Manage department burden, tooling, obsolescence, and momentum budgets
- Manages assigned resources and aligns census with project and factory needs
- Provide technical leadership to the site to ensure improvements or achievement of AOP in the following: On-Time Delivery, PPM, Escapes, Cycle-time Reduction, First Pass Yield, Turn around Time, Inventory Reduction, COPQ and Safety
- Improve the PE organizations impact on enterprise by improving product producibility
- Establish strong working relationship with operations, product health teams, and embrace self-managed work teams
- Serve the factory through responsive resolution to factory floor issues, and flow disruption. Lead product escape containment actions and RCCA
- Deliver on customer’s expectations of escape-free products
30
Manager, New Product Manufacturing Engineer Resume Examples & Samples
- Leads engineering team, projects and programs in area of responsibility, and ensures that necessary preliminary activities (e.g., determination of outcomes, milestones, viability studies, and resource planning, among others) are completed to allow for effectiveness and focus during later stages of projects
- Ensures that all projects and programs assigned are completed in accordance with predetermined requirements, with specific attention to product/process specifications, project/program costs, resource utilization, and timeliness for completion. Escalates to Executive Managment when technical risks or program schedules will impact customer deliverables
- Primary interface and escalation path to single BU DE/Ops/GPM for all NPI Engineering deliverables. Ensures that all phases of project, program and/or process development are documented and that information required in other functional areas is reported, disseminated, or transferred, as appropriate. Ensures compliance with company policies including (but not limited to) patents, Intellectual property, confidentiality, ISO, safety and others as required
- Ensures that the utilization of team capability is carried out in an effective manner to ensure maximum productivity for the area. Ability to consistently monitor and recommend improvements. Identifies additional Engineering capability (DFx, DFc, DFt, ...) and brings into early product design to optimize manufacturability of product
- Establishes and manages departmental budgets and spending requirements. Ensures that the utilization of financial resources is carried out in an effective manner in alignment with AOP to ensure maximum productivity for the area
- Spearheads research and development of new manufacturing technologies, products and business processes, as appropriate, and ensures that newly created processes, designs, and/or methodologies are incorporated into Applied Materials products, and/or disseminated to other business units and segments as needed
- Effectively utilizes common engineering technology and software packages for optimization of design development activities and timelines to ensure rapid commercialization
31
Senior Product Manufacturing Engineer Resume Examples & Samples
- Lead overall product and process improvements using the DMAIC producibility operating system
- Support customer communication to facilitate and improve Product Quality and delivery as needed
- Manage projects and lead work direction and mentoring to other Engineers and Product Engineering Technicians
- Drive improvement of unit cost management including Cost Savings, Quality Measures, Product Cost, Productivity, Escapes and Rolled Throughput Yields
- Support all internal and regulatory audits
- Suggest changes to Design Engineering regarding issues impacting product integrity
- Provides data for analysis and identification of capital equipment needs to address gaps in capacity. Manage approval, quotation, ordering, and installation processes
- Drive adherence to department Momentum (Design Engineering) budgets
- Provide technical leadership to ensure improvements or achievement of AOP in the following: On-Time Delivery, PPM, Escapes, Cycle-time Reduction, First Pass Yield, Turn Around Time, Inventory Reduction, COPQ and Safety
32
New Product Manufacturing Engineer Resume Examples & Samples
- Act as a liaison between new product development and manufacturing
- Conduct product costing studies, monitoring cost targets, and leading cost reduction initiatives
- Recommend alternative designs to ease in manufacturing of product
- Identify, develop, and implement manufacturing procedures and processes for new product
- Support new product introductions in manufacturing plants
- Early supplier evaluation and development
- Evaluate equipment for new technologies or processes
- Support or lead value stream mapping initiatives
- Work with the quality assurance team to identify and implement quality improvement activities
- Utilize Design for Manufacture and Assembly principles to support continuous improvement
- Partner with the manufacturing and design teams to develop and implement product improvements
33
New Product Manufacturing Engineer, Senior Resume Examples & Samples
- Creates Manufacturing strategies & Manufacturing sequences
- Launches/releases/approves and implements items/changes required for supporting design engineering and floor for new/existing products
- Participates in the development and maintenance of new business processes; edits as necessary to ensure current practices are documented
- Performs other duties as assigned. Duties will vary according to the project in progress and/or the specific goals of the department in which the incumbent works
- Requires demonstrated knowledge of manufacturing engineering discipline, theories, practices and principles
- Requires strong skills in Product technology, problem solving, communication skills, customer orientation, personal effectiveness, team skills, and quality
- Knowledge of CAD tools (Creo & PDM), SAP
34
Product Manufacturing Engineer Resume Examples & Samples
- It is permanently in touch with Customer Team to launch new products or changes to manufactured products, following the phases of the internal procedure related to the launch of new products
- Tracking all changes to new or manufactured products and communicate changes to the BOM (bill of materials) department of supply
- Defines the technological process for new products
- Develop and identify production equipment for new products
- Coordinate the purchase of equipment, devices and technological changes for new products
- Coordinate the development of the PFMEA for the processes specific to each type of product
- Prepares documentation for new products / equipment (operating plan, specific working instructions)
- Collaborate with the quality department to process the control plan
- Draws up and / or validates the work programs of equipment working with specific parameters for each product
- Coordinates the internal homologation of products, and prepares the internal homologation file
- Provides training for all features involved in launching a new product with regard to its features
35
New Product Manufacturing Engineer, Senior Resume Examples & Samples
- Develops, implements, and releases new product BOMs for complex modules and product structure. Works with key stakeholders to develop and implement new product manufacturing, test, and sourcing strategies
- Manages the development and validation of Operation Method Sheets (OMS) for new products
- Actively participate in design reviews, providing DFx, ITO, and operational efficiency improvement feedback to new product development team to ensure cost, quality, and cycle time goals are met
- Control change using the change management process (Supplier Problem Sheets, Engineering Specification Waiver, Engineering Change Order)
- Assists in determining root cause analysis for issues that arise during assembly and/or test of new products
- Manage Non Standard Requests (NSR) through completion
- Leads the manage build process. Works with stakeholders to close and/or disposition issues documented via manufacturing NC, field NC, and SPS
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers
36
New Product Manufacturing Engineer, Senior Resume Examples & Samples
- Creates/maintains Master layout in UG/NX (Models of New Products)
- Develops project methodology and/or project proposals
- Participates in New Product Builds & Champions issue resolution. Determines root cause analysis for issues that arise during assembly and/or test of systems; provides Long term corrective action
- In depth knowledge of CAD tools (UG-NX & Team center), Oracle BOM & ECO is a must
37
MDP New Product Manufacturing Engineer Resume Examples & Samples
- Manages the development and validation of Operation Method Sheets (OMS) for medium complex modules
- Performs 3D solid model virtual analysis process, including Master Layout (MLO) and Digital Mock Up (DMU). Actively participates in design reviews, providing DFA, DFAe, DFTp, ITO, and operational efficiency improvement feedback to new product development team to drive cost, quality, and cycle time goals
- Orchestrates change requests and executes change control processes including Non Standard Requests (NSRs), Engineering Change Orders (ECOs), Change Control Board (CCB), Supplier Problem Sheets (SPSs), Engineering Specification Waivers (ESWs)
- Leads the managed build process for programs/projects
- Provides technical support and training to Applied and contract manufacturing resources, including piece part suppliers related to new product introductions
- Bachelor's Degree in Engineering Discipline
- 4 - 7 Years of Experience
- Teamcenter Modeling and BOM Creation
- Hi-Vacuum PVD Equipment Knowledge
