Manufacturing Technology Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the manufacturing technology engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

G Cassin

Genoveva

Cassin

6368 Jakubowski Cliffs

Phoenix

+1 (555) 460 0844

6368 Jakubowski Cliffs

Phoenix

Phone

p +1 (555) 460 0844

Experience Experience

Philadelphia, PA

Manufacturing Technology Engineer

Philadelphia, PA

Collins-Lind

Philadelphia, PA

Manufacturing Technology Engineer

Develops and specifies processes for new hardgoods products
Supports new product scale-up and qualification, and knowledge transfer to factories
Work with cross functional team members to manage the global extended value stream
Lead major capital deployment and process/product improvement projects
Support disruptive technology deployment, product line maintenance and critical supplier management activities
Lead business critical cost out, PPU and Lean projects for the Auscultation business
Drive continuous improvement activities for Class I medical device manufacturing operations

Chicago, IL

Manufacturing Technology Engineer Global Projects

Chicago, IL

Ledner, Torphy and Rolfson

Chicago, IL

Manufacturing Technology Engineer Global Projects

Develops and applies knowledge of loops checks, control of energy, equipment check-out, process commissioning, troubleshooting of unusual problems
Develops and leads tests to support product development
Works with Operations to improve safety, yield, and uptime
Provides technical oversight of day – to – day operations
Participates in and executes activities related to small capital projects (including commissioning, de-commissioning, start-up, shut down, etc.)
Assists in Operator & Mechanic Training
Assists Operations and Maintenance with troubleshooting, root cause analysis and problem solving

present

Chicago, IL

Senior Manufacturing Technology Engineer Sweeteners

Chicago, IL

Boehm, Reichel and Harber

present

Chicago, IL

Senior Manufacturing Technology Engineer Sweeteners

present

Responsible for deploying the strategy, vision, direction, long-term solution for manufacturing technology within the business group
Provides functional leadership, coaching and manages process engineers that directly support the manufacturing technology
Responsible for translating technical process expertise to advise/consult on technology implementation of policies, procedures and standards as well as planning and execution of manufacturing technology assignments
Provides leadership to monitor manufacturing technology performance metrics and goals to assess effectiveness as well as overall business impact. Partners with business operational Leadership to deploy performance metrics
Partners with Manufacturing Excellence SMEs to assist with the application of continuous improvement leading practices/tools to improve the manufacturing process cost and/or capabilities
Helps deliver a technical education program for targeted audiences (such as line management, process engineers, Build project manufacturing technology lead, Engineering R&D) of the manufacturing technology
Make use of established network to enforces corporate benchmarking metrics and performance measurements to advise/consult on process improvement solutions that contribute to efficiency improvements

Education Education

Bachelor’s Degree in Chemical Engineering

Georgia State University

Bachelor’s Degree in Chemical Engineering

Skills Skills

CAD, able to generate conceptual and detailed drawings in Autodesk Inventor
Knowledge of process validation procedures and techniques e.g. FMEA, process capability studies
Strong problem solving skills and effective time management and multi-tasking skills
Support NPI project launches by ensuring robust manufacturing capability and establishing accurate cost estimates and improvement roadmaps
Strong work ethic
Define and lead technology advancement projects for cost reduction and quality improvement
Effective decision making and analytical ability to render sound decisions based on data
Knowledge in lean manufacturing tools
Experience should include technical support of a cGMP Biologics manufacturing facility, including knowledge of drug substance processing equipment
Excellent communication skills both oral and written

Create a Resume in Minutes

15 Manufacturing Technology Engineer resume templates

Read our complete resume writing guides

Manufacturing Technology Engineer Resume Examples & Samples

Develops and specifies processes for new hardgoods products
Leads projects to identify and implement additional capacity or increased capability or efficiency
Supports new product scale-up and qualification, and knowledge transfer to factories
Bachelor's degree or higher in a science, engineering, or technical discipline from an accredited university
Minimum eight (8) years of experience in a manufacturing role
Minimum three (3) years of experience manufacturing project leadership role
Successful record of executing large new technology scale-up programs
Experience with injection molding of high precision and/or optical quality parts
Lamination, polishing, or high speed assembly experience
Experience working with outsourcers
Experience with automation and vision/measurement systems
Strong skills in process development and creating cost/capacity models
Strong problem solving skills, including root cause analysis, FMEA, and Designed Experiments
Flexibility to support multiple projects and technologies simultaneously
Ability to interact and collaborate effectively with multiple functions
Comfortable interfacing with customers to understand specifications and product issues

Ethanol Manufacturing Technology Engineer Resume Examples & Samples

Participates and supports with BU and location network of Subject Matter Experts
A minimum of 10 years’ experience in the development/improvement of Ethanol production process (particularly the distilling steps) working as a process Engineer, in operations, or in Engineering
Self-starter, able to work in autonomy with a manager working remotely
Languages: Fluent in English (writing and speaking)
Job position would require travelling over all BU locations and to Mechelen headquarters is required

Energy Manufacturing Technology Engineer Resume Examples & Samples

Establishes strategic partnerships and influences plant relationships to recommend and support completion of assignments as well as sets standards and procedures
Advises/consults and provides deliberate input into the project pipeline/portfolio with ideas for capturing, monitoring and/or applying leading practices insight as well as to the growth of distinctive Technology offerings
A minimum of 10 years’ experience as an energy engineer
Comprehensive and advanced knowledge of processes and capabilities in the area of all types of energies needed in a plant
Proven ability to stay abreast of best practices and implementing / executing into action
Proven ability to influence results w/peers, management teams and contractors
Continuous Improvement tools understanding and willingness to data-factual based analysis decision making process
Proficiency with Microsoft Excel, Word, and PowerPoint and engineering most used software

Starches Manufacturing Technology Engineer Resume Examples & Samples

Supports the implementation of corporate best practices in Manufacturing Technologies
Technical Education (engineering Degree) or relevant equivalent experience
A minimum of 10 years’ experience in the development/improvement of all steps of Starches production process working as a process Engineer, in operations, or in Engineering

Manufacturing Technology Engineer Resume Examples & Samples

Work with cross functional team members to manage the global extended value stream
Lead major capital deployment and process/product improvement projects
Support disruptive technology deployment, product line maintenance and critical supplier management activities
Lead business critical cost out, PPU and Lean projects for the Auscultation business
Drive continuous improvement activities for Class I medical device manufacturing operations
Bachelor's degree or higher in a science or engineering discipline from an accredited institution
Minimum of five (5) years of experience with manufacturing projects
Minimum of three (3) years of in-plant manufacturing experience
Bachelor’s degree or higher in Mechanical, Chemical or Industrial Engineering
Experience leading major manufacturing projects
Excellent communication and effective interpersonal skills
Demonstrated cross functional ability including significant cost reduction and product development projects

Manufacturing Technology Engineer, Building Resume Examples & Samples

Define world-class manufacturing processes to bring new technology to consumer devices
Support Technical Program Leaders in the development of new technologies and remove manufacturing barriers from the path to commercialization
Support high volume production of products taking ownership of the most challenging and new areas of manufacturing
Work closely with the Creative team to realize the use of new materials, methods and surface finishes for world-class Industrial Design
Support the Supply Chain team to define equipment and process required to produce a given product
Passion for Facebook’s mission of making the world more open and connected
Expert in part creation processes including CNC milling/turning, plastic injection molding, stamping, MIM, casting etc
Process familiarity with surface finishing such as blasting, polishing, anodizing, paint and ink and joining techniques such as laser welding, gluing, ultrasonic welding, heat staking
Provide onsite support at manufacturing and partner sites during development and product ramp
5+ years hands-on experience building, testing and evaluating hardware & software systems
B.S./B.A. in engineering/scientific discipline or equivalent years of experience

Manufacturing Technology Engineer Resume Examples & Samples

Initiates and leads the process development activities for new products and processes
Active member of cross-functional NPI and NTI teams; ensures Design for Manufacturability in early stages
Plans and executes the technology transfer of new products and processes to manufacturing plant. Delivers projects safely, on-time, and within budget
Identifies and implements disruptive manufacturing technologies to improve product cost, service and quality
Completes formal process validation studies and documents work according to established procedures for medical device manufacturing
Develops, presents and communicates capital proposals for new processing technology and cost reduction opportunities
Performs experiments in pilot plant using various batch process equipment
Provides process related input for the design of new process equipment
Bachelor's degree or higher in an engineering discipline from an accredited university
Minimum three (3) years’ experience of any combination of process development, process research, manufacturing technology, or manufacturing engineering
Bachelor of Science degree in Chemical Engineering, Mechanical Engineering, Biomedical Engineering, or Materials Science and Engineering from an accredited university
Three or more years of manufacturing plant or pilot plant experience
Experience working in a medical device or regulated business
High level of mechanical aptitude
Ability to understand and apply analytical and statistics tools
Knowledge and experience using Lean Six Sigma tools and methodology for problem solving, project management, control plans, and/or continuous improvement
Effective facilitation, communication, and teaching skills
Results-oriented with strong process and execution skills
Self-starter who leads with high energy

Manufacturing Technology Engineer Resume Examples & Samples

Generally requires a Bs or Msc. in engineering or related technical field
A minimum of 8+ year relevant experience in technical operations or design engineering in a consumer electronics environment
A minimum of 5+ year experience in collaborating on site within the local factories with overseas contract manufacturing organizations
Experience in all phase of product development cycle (concept to end of life)
Concise and Precise in Written and Oral communications, Able to present
Create Intellectual Property in including patents and trade secrets based on process development
Proficient in using statistical tools and methods such as; Statistical Process Control (SPC), Gauge R&R, Process Capability (Cpk/Ppk), Confidence Levels/Intervals
Software: JMP or Minitab, ProE. MS Office
Travel as needed
PREFERRED QUALIFICATIONS

Manufacturing Technology Engineer Resume Examples & Samples

Acts as the lead technology resource for their area of production
Monitors product and process performances as needed; assessing reliability of operations, identifies failures and root causes, and implements solutions to eliminate the root cause, and drives continuous improvement
Specifies and documents technology/equipment parameters to insure the process is capable of delivering product that meets or exceeds established quality specifications. Works directly with other resources in the business to continuously improve quality across the supply chain
Recommends, specifies, and implements improvements to production processes, methods, and mechanical equipment. Works closely with Operations and Maintenance to implement continuous improvement, including training of operators. Leads the organization through asset effectiveness improvement programs
Works with Process Safety Management (PSM) critical equipment and processes. Understands how PSM requirements are implemented in the process and leads process hazards analysis (PHA)
Provides technical support required to maintain day-to-day production activities
Participates in and leads Incident Investigations, including implementing resulting recommendations
Effectively interfaces with technicians/operators
B.S. Chemical, Mechanical or Electrical Engineer
0 GPA or higher preferred
6 months of relevant work experience
U.S. Citizen or other residency status permitting Export Control clearance
Strong technical and functional skills
Demonstrated knowledge of manufacturing safety and methodologies applicable to a manufacturing setting
Demonstrated ability to support, complex, time-sensitive projects
Willingness to provide 24x7 area support when required
Good interpersonal and communication skills, must work well in both self-managed and team environment

Manufacturing Technology Engineer Resume Examples & Samples

BS or above in Mechanical Engineering
At least 6 months of CoOp or equivalent intern experience, preferably in a manufacturing environment (Experienced candidates are highly encouraged to apply)
Ability to work with others involved in a variety of functions including operators, mechanics, other engineers of various disciplines, management, and other leaders to impact in a positive way the plant performance parameters

Manufacturing Technology Engineer Global Projects Resume Examples & Samples

Learns relevant operating processes & technology to which assigned
Provides technical oversight of day – to – day operations
Works with Operations to improve safety, yield, and uptime
Recognizes when process is not in control, and understands the steps needed to address
Identifies and implements solutions to manufacturing issues related to technology
Assists in Operator & Mechanic Training
Leads Technology Elements of PSM (Process Technology, PHA, Management of Change-Technology)
Leads MT and productivity related improvements for the unit(s)
Develops and applies knowledge of loops checks, control of energy, equipment check-out, process commissioning, troubleshooting of unusual problems
Develops and leads tests to support product development
Participates in and executes activities related to small capital projects (including commissioning, de-commissioning, start-up, shut down, etc.)
Networks with peers and leverages broader organization including R&D, DuET, Marketing, etc
Understands, and conducts cost benefit analysis
Technical Degree (BS, MS, or PhD) or equivalent experience
Six Sigma Certification is a plus
Chemical engineering experience
Food industry experience would be an advantage
Process safety management experience would be an advantage
Fluent English is a must, other European languages would be an advantage

Manufacturing Technology Engineer Resume Examples & Samples

Either possess or be in the last year of pursuing a Bachelors degree or higher from an accredited university
Bachelor's degree or higher in electrical engineering, mechanical engineering, computer science, physics, or other similar field
Strong leadership, communication, organization, and team skills
Experience in product development, manufacturing technology, process engineering, or quality engineering positions
Experience with image processing, signal processing, optics, and/or machine vision
Six Sigma

Manufacturing Technology Engineer Resume Examples & Samples

Conduct cost, material, and plant efficiency studies
Trouble shooting and process support both local and worldwide
Optimize and fine tune processes
Ensure compliance with safety and quality standards on site
Participate in implementing DuPont´s process safety management systems
Introduction of new technologies and process principles
Participate in projects teams as a member or leader
Chemical processes and thermodynamics
Unit operations within chemical and food industries
Food safety standards (HACCP, GMP and HYGIENE etc.)
Process safety
Statistical process control
Microsoft office – Excel at high level will be a benefit

Senior Manufacturing Technology Engineer Fermentation Resume Examples & Samples

Utilize expertise of manufacturing technology principles and practices, and partners with engineering discipline leaders to deploy necessary design requirements for a manufacturing technology that has the capability to deliver the products and / or services meeting the market requirements, and internal / external risk tolerances and standards, while achieving the best total cost to operate
Provide leadership to monitor manufacturing technology performance metrics and goals to assess effectiveness as well as overall business impact. Partner with business operational leadership to deploy performance metrics
Lead, define and establish auditing and compliance for the manufacturing technology
Lead innovation in fermentation area to improve continuously performance of existing process lines
Support delivering a technical education program for targeted audiences (such as line management, process engineers, build project manufacturing technology lead, engineering R&D) of the manufacturing technology
Through direct contact or team, develop partnership with customers / businesses to develop deep knowledge / understanding of the manufacturing setting, business product / service life cycle, environmental and sustainability impact, future growth considerations, as well as overall cost of ownership and long-term usability of assets
Degree in Engineering / Food Science or Microbiology / Biotechnology / Bioengineering based disciplines (or equivalent)
At least 5 years of experience in manufacturing, engineering or R&D
Extensive knowledge of at least one of the relevant fermentation process areas
Excellent verbal and written communication skills, preferably multi-lingual
The ability to work effectively in a matrix organization with cross-cultural and cross-functional teams
Able to think and act across boundaries
Ability to finalize projects and initiatives through drive and conviction
Demonstrated ability to manage multiple projects while effectively communicating goals, objectives and accomplishments to a broad audience
Original and independent thinking will be needed on many aspects of process innovation e.g. new areas of process development not tried before in the industry

Manufacturing Technology Engineer Resume Examples & Samples

Technology transfer / SOS transfer
New technology deployment / commercialization
Process development to improve current process capability
DT/MT SME consultation
Global VSM
Technology platform
Support NPI/NTI program for a robust supply chain and stable process
Design for manufacturability
Establish process capability
Other tasks assigned by supervisor
Bachelor degree or above, major in chemical engineering, mechanical or PI&CS engineering
Minimum 5 years 3M processing or engineering experience
Good team player & willing to take challenge
Good communication in both Chinese and English (written & oral)

Manufacturing Technology Engineer Resume Examples & Samples

Provides technical leadership to improve process safety, reliability, capability and productivity
Design solutions and lead multi-discipline programs to improve processes based on business input (yield, uptime, capacity release, cost performance)
Supports capital projects, including scope and basic data development, project oversight and equipment start up
Participates in Process Safety Management efforts for the area
Leads and/or participates in Process Hazards Analysis reviews
Leads programs to meet tactical and strategic business objectives
Identifies and works with Site MT personnel to implement best practices for processes
Provides technical oversight or leads troubleshooting and root cause analysis for complex operational issues, including SHE and quality incident investigations
Network with peers and leverage knowledge from other functions and corporate groups
Assist in training the manufacturing line organization (operations and maintenance) to boost the organization’s knowledge and capability
BS degree (or higher) in Chemical Engineering
3-10 years of equivalent experience in a chemical operations environment
Demonstrated ability to apply technical knowledge to diagnose, troubleshoot, solve or help others solve equipment and/or process issues
Demonstrated knowledge of key Process Safety Management (PSM) Technology elements such as Process Hazards Analysis, Process Technology, Management of Change-Technology, RAGAGEP among others
Demonstrated ability to work in a team based environment
Demonstrated ability to plan, prioritize and manage time-sensitive projects
Must work well in both independently and in team environment
Ability to access and network with appropriate site and corporate teams to gain or share knowledge
Self-management skills with strong initiative and attention to detail
Demonstrated skill to diagnose and solve technical problems; ability to develop data-driven solutions
Provide leadership skills and able to listen to team members' input to make recommendations aligned with production goals
Experience with highly toxic materials is preferred
Six Sigma certification is preferred

Manufacturing Technology Engineer Extraction & Thermal Separation Processes Resume Examples & Samples

Developing Technology Transfer Packages for the relevant technologies in scope
Translating technical process expertise to advise/consult on technology implementation of policies, procedures and standards as well as planning and execution of manufacturing technology assignments
Providing leadership to monitor manufacturing technology performance metrics and goals to assess effectiveness as well as overall business impact; partnering with Business Unit Leadership to deploy performance metrics
Partnering with Manufacturing Excellence SMEs to assist with the application of continuous improvement leading practices/tools to improve the manufacturing process cost and/or capabilities
Providing lessons learned from the regional technology to the manufacturing technology leader to continuously improve manufacturing technology design requirements
Providing leadership, defining and establishing audit and compliance for the manufacturing technology
Responsible for deploying the strategy, vision, direction, long-term solution for manufacturing technology within the region or business unit
Degree in Engineering/Food Science based discipline (or equivalent)
At least 5 year experience in manufacturing
Excellent verbal & written communication skills in English, any other European language is a strong asset
The ability to work effectively in a matrix organization with cross-cultural and functional teams
Continuous improvement mind set
Ability to develop a strong network of experts in the field inside and outside Cargill
Demonstrated informal leadership and convincing skills
Responsive and results driven
Comfortable working within a multicultural environment

Manufacturing Technology Engineer Resume Examples & Samples

Utilizing expertise of manufacturing technology principles and practices and partnering with Engineering discipline leaders to deploy the 10 engineering discipline design requirements for a manufacturing technology that has the capability to deliver the product(s) and/or service(s) meeting the market requirements
Partnering with Functional Leadership (Engineering R&D, Strategic Sourcing, Reliability, Safety, Environmental, FSQR) to implement the design requirements for the manufacturing technology
Providing direct/indirect customer support and delivering services coming from the manufacturing technology
Collaborating across the region or business unit to identify, monitor and where applicable, implement manufacturing technology design improvements for existing facilities
Helping deliver a technical education program for targeted audiences
Provide advice and technical content for the technical education program across the region or business unit with manufacturing technology
Providing functional leadership, coaching and manages process engineers that directly support the manufacturing technology
Creating plans for workforce needs to support the manufacturing technology within the region or business unit
Through direct contact or team, developing partnership with customers/businesses to develop deep knowledge/understanding of the manufacturing setting, business product/service life cycle, environmental, and sustainability impact, future growth considerations
Extensive knowledge of at least one of the relevant processes
Play to win-mentality with a passion for technology
Original & independent thinking skills will be needed on many aspects of process innovation (i,e. this will be new areas of process development not tried before in the industry)
Ability to decide on process design for new process and in expansion projects
Comfortable working within a multicultural environement
Flexible and being able to cope with travel across the global locations between 20 – 50 % of the time

Manufacturing Technology Engineer Resume Examples & Samples

Identify opportunities for improvements in quality, cost, reliability and efficiency of manufacturing equipment
Identifying and implementing new manufacturing technologies, processes or equipment
Provide input to Pall’s Global Manufacturing Technology knowledge network
Install and evaluate manufacturing equipment, materials or components
Prepare plant and cell layouts, specifications, drawings, sketches of machinery / equipment including tooling and standard work documents using CAD software
Develop capital investment justifications for manufacturing equipment
Train manufacturing associates on production equipment including H&S, quality etc
Computer literate (SAP, Microsoft Office software, Project Management, Statistical Analysis)
Experience in Manufacturing Technology development
Strong problem solving skills and effective time management and multi-tasking skills
Exhibits a high degree of ingenuity, creativity, and resourcefulness
2+ years experience in Manufacturing & Equipment engineering
2+ years experience in technical process improvements

CSU Manufacturing Technology Engineer Resume Examples & Samples

20% Responsible for project team leadership, organization and alignment. Manages construction personnel and activities insuring adherence with safety requirements, schedule, scope, change management processes and budget
10% Develops, reviews and awards bid packages for labor and equipment including contract negotiations in cooperation with Procurement and Cargill Law
10% Supports the start-up, commissioning personnel and activities
5 or more years of project engineering and/or operations supervision
Experience outside of project engineering such as operations, PDG, and/or maintenance

Manufacturing Technology Engineer Resume Examples & Samples

Conducts and manages resolution of deviations, root cause investigations, impact assessments and CAPAs as a Lead Investigator
Liaises with many different groups/organizations as a Lead Investigator
Proactively identifies and facilitates resolution of obstacles to timely completion
Leads and participates in cross-functional investigation teams
Presents investigation findings to key stakeholders and site management
Uses Quality Risk Management and Operational Excellence principles to facilitate risk-based decision-making, drive continuous improvement, and eliminate waste
Addresses at risk quality metrics by identifying unit operation improvement opportunities and collaborating with process experts and Quality Assurance to implement solutions
Liaises with Manufacturing Sciences & Technology Organization for investigations and other project work
Minimum BS or equivalent in the biological sciences or chemical/biochemical engineering or a related discipline, with a minimum 4-8 years relevant experience, MS or equivalent with minimum of 2-6 years relevant experience, Ph.D. in upstream and/or downstream manufacturing technical support or upstream/downstream process development in the biopharmaceutical industry
Experience in writing investigations, and demonstrated effectiveness in quality systems in a FDA and EMA regulated environment

Manufacturing Technology Engineer Resume Examples & Samples

Bachelor'sdegree or higher in an engineering or science discipline from an accredited university
Minimum of three (3) combined years of manufacturing plant and/or pilot plant experience
Minimum of three (3) years of injection molding, or tool die design/maintenance
Bachelor of Science in engineering, or physical sciences from an accredited college or university
Experience with GMP manufacturing and process validation
Experience with plastics, injection molding, tool & die design/maintenance
Experience with automated assembly processes and equipment
Manufacturing plant operations experience
Demonstrated analytical and statistical capabilities, Six Sigma experience
Project leadership experience
Ability to develop and foster a network across the company and across functions
Self-directed mindset that leads with high energy and works with minimal supervision or guidance
Ability to prioritize, multi-task and remain flexible to changes; responds with a sense of urgency

Manufacturing Technology Engineer Resume Examples & Samples

Implement Mechanical Integrity and Quality Assurance best practices
Actively participate as a member on the Site PSM Committee leading the MI and QA elements
Maintain the process safety management (PSM) equipment criticality assessment process
Manage the MIQA program, including critical spare parts, inspection plans, inspection frequencies, and maintenance procedures
Represents the site to the Regional MIQA network
Perform incident investigations associated with mechanical integrity failures and establish necessary controls to prevent the event from reoccurring
Identify and lead continuous improvement projects
Provide technical support for capital projects and shutdowns
Help train personnel and improve and enhance operator capability
BS degree in Engineering (Mechanical preferred)
At least three years of operations or manufacturing technical experience
Six Sigma certified Black Belt or Green Belt preferred
Working knowledge of

Manufacturing Technology Engineer Resume Examples & Samples

Bachelor's degree or higher in an engineering or science discipline from an accredited university
Minimum of three (3) combined years of manufacturing, manufacturing technology, plant and/or pilot plant experience
Bachelor of Science in Chemical or Mechanical Engineering, or physical sciences from an accredited college or university
Experience with cGMP manufacturing for production of sterile products, including equipment qualification and validation IQ/OQ/PQ; strong knowledge of the FDA and cGMP standards
Experience with sterile dressing manufacturing and rotary converting technology
Experience with chemical processing (polymers, emulsions, mixing, reactive mixing, polymerization), mechanical operations (coating, slitting, laminating, die cutting, converting, packaging) and sterilization processes (gamma, ETO)
Demonstrated analytical and statistical capabilities, root cause analysis, pFMEA

Manufacturing Technology Engineer Resume Examples & Samples

Bachelor’s degree or higher in an Engineering or Computer Science discipline from an accredited university
Minimum of two (2) combined years of experience in an engineering and/or manufacturing environment
Bachelor’s degree or higher in Electrical Engineering or Computer Science from an accredited university
Direct experience installing and configuring caliper gauging systems including IR absorption or beta transmission sensors such as Measurex, EGS Gauging, NDC Technologies, etc
Experience in control disciplines such as Advanced Process Control, Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems and Programmable Logic Controllers
Programming experience in one or more of the following systems: Allen-Bradley Control Logix, Modicon, Siemens, Visual Basic, LABView, or related systems
Demonstrated project management skills, including prioritization, resource allocation
Strong communication skills including negotiation and conflict management
Ability to work successfully in a cross-functional team environment

Manufacturing Technology Engineer Resume Examples & Samples

Bachelor of Science degree in Chemical Engineering
Demonstrated strong commitment to manufacturing excellence
Demonstrated strong customer focus
Strong interpersonal and leadership skills and a "hands-on" attitude

Packaging & Manufacturing Technology Engineer Resume Examples & Samples

MSEE/Ph.D in Material Science with 10+ years of relevant actual product design analysis experience
Prior design and modeling experience developing new packages
High speed interfaces, and/or DDR, and/or high power core power integrity analysis is a must
Deep expertise in latest silicon packaging and manufacturing technology
Strong hands-on skills in design, prototyping, simulation and lab validation

Regional Dry Corn Milling Manufacturing Technology Engineer Resume Examples & Samples

20 %
Bachelor Degree in Engineering (Mechanical or Chemical) OR Bachelor’s Degree in Technical
5+ years of dry milling technical/operational experience
Ability to effectively communicate through written, verbal and presentation skills with
Cross-functional experience such as Manufacturing Technology, R&D, project engineering,
Demonstrated ability to lead teams to achieve business results in ambiguous and challenging work situations
Demonstrated competencies in several of the key process unit operations of the processing technology
Basic competencies in food safety, PSM, RCAs, MOC, and risk analysis
Demonstrated competency and utilization of Statistical tools such as Minitab, JMP,

Senior Manufacturing Technology Engineer Sweeteners Resume Examples & Samples

Utilizes expertise of manufacturing technology principles and practices and partners with Engineering discipline leaders to deploy the 10 engineering discipline design requirements for a manufacturing technology that has the capability to deliver the product(s) and/or service(s) meeting the market requirements and internal/external risk tolerances and standards while achieving the best total cost to operate
Development of Technology Transfer Packages for the relevant technologies in scope
Partners with Functional Leadership (Engineering R&D, Strategic Sourcing, Reliability, Safety, Environmental, FSQR) to implement the design requirements for the manufacturing technology
Provide direct/indirect customer support and delivery of services in the field of manufacturing technology
Responsible for translating technical process expertise to advise/consult on technology implementation of policies, procedures and standards as well as planning and execution of manufacturing technology assignments
Provides leadership to monitor manufacturing technology performance metrics and goals to assess effectiveness as well as overall business impact. Partners with business operational Leadership to deploy performance metrics
Partners with Manufacturing Excellence SMEs to assist with the application of continuous improvement leading practices/tools to improve the manufacturing process cost and/or capabilities
Collaborate and champion across the region and business to identify, monitor and where applicable, implement manufacturing technology design improvements for existing facilities
Provides lessons learned from regional technology to central manufacturing technology area leader to continuously improve manufacturing technology design requirements and work processes
Champions and leverages strong business/customer partnership to ultimately influence changes to bridge technology gaps within the region or business
Champions and promotes long-term sustainability of process improvement and leading practices
Provides leadership, defines and establishes auditing and compliance for the manufacturing technology
Make use of established network to enforces corporate benchmarking metrics and performance measurements to advise/consult on process improvement solutions that contribute to efficiency improvements
Helps deliver a technical education program for targeted audiences (such as line management, process engineers, Build project manufacturing technology lead, Engineering R&D) of the manufacturing technology
Partners with Operations Leaders to assess the technical competency and minimum standards that operators, line management, and a build team must achieve before building or operating the process independently within the manufacturing technology
Provide leadership and technical content for the technical education program across the regions and in the business with manufacturing technology
Provides functional leadership, coaching and manages process engineers that directly support the manufacturing technology
Creates plans for workforce needs to support the manufacturing technology within the region and business
Accountable for or partners with managers of process engineering that directly support manufacturing technology in performance management, talent development and succession planning
Leverages organization capabilities of cross-functional internal and external resources to define and monitor performance of a manufacturing technology
Responsible for deploying the strategy, vision, direction, long-term solution for manufacturing technology within the business group
Through direct contact or team, develops partnership with customers/businesses to develop deep knowledge/understanding of the manufacturing setting, business product/service life cycle, environmental, and sustainability impact, future growth considerations, as well as overall cost of ownership and long-term usability of assets
Participates in industry organizations as the Manufacturing Technology SME representing Cargill to influence and keep abreast of regulations and/or RAGAGEP (Recognised and Generally Accepted Good Engineering Practices) applicable to the manufacturing technology
At least 5 years experience in manufacturing/engineering or R&D
Extensive knowledge of at least one of the relevant processes areas
Excellent verbal & written communication skills, preferably multi-lingual
Demonstrated ability to understand complex operational, engineering and business activities
Strong organizational and time management skills
Network of experts in the field inside and outside Cargill
Demonstrated informal leadership skills
Ability to finalise projects and initiatives through drive and conviction
Demonstrated ability to manage multiple projects while effectively communicating goals, objectives, and accomplishments to a broad audience
Original & Independent thinking will be needed on many aspects of process innovation .i.e. this will be new areas of process development not tried before in the industry

Manufacturing Technology Engineer Resume Examples & Samples

Global project lead for critical projects in the Division
Project lead for second source of supply projects for raw materials
Manufacturing SME liaison between DDS plant locations to support product / processes continuity, improvements, and cost out efforts
Define and lead technology advancement projects for cost reduction and quality improvement
Determine process and technology needs and global manufacturing supply chain for new products
Data driven decision making and systematic problem solving
Communicating timelines, deliverables and resource needs to complete projects in a timely manner
Provide manufacturing support to help meet Division objectives
Division Disruptive Technology lead
Bachelor's degree or higher from an accredited institution
Minimum of five (5) years of combined experience in manufacturing and/or manufacturing technology
Bachelor’s degree or higher in Mechanical engineering, Chemical engineering and/or Industrial or manufacturing engineering from an accredited university
Eight (8)+ years of combined experience in a plant process engineering and/or manufacturing technology role in a manufacturing environment
Ability to work in a cross-functional, cross-divisional team environment
Experience with new equipment installations and startups
Experience developing and managing capital budgets and timelines
Experience supporting new product development and commercialization
Experience leading cross functional teams through complex projects from planning to completion
Experience with web Handling, Coating, Slitting, Converting, Extruding or comparable experience
Experience in a regulated environment

Manufacturing Technology Engineer Resume Examples & Samples

Work with cross functional team members to manage global extended value streams
Support disruptive technology deployment and critical supplier management activities
Lead top Lean Six Sigma cost out, PPU and Lean manufacturing projects
Support business critical NPI project commercialization activities
Bachelor of Science degree or higher from an accredited institution
Bachelor of Science degree or higher in engineering from an accredited university
Minimum of five (5) years manufacturing experience
Comfortable working in fast-paced, cross functional team environments
Self-starter with demonstrated project leadership skills
Experience with injection molding operations and/or automated assembly applications
Excellent communication, problem solving and analytical skills

Manufacturing Technology Engineer Resume Examples & Samples

Lead process development and process validation for new products. Develop cost estimates and manufacturing paths. Translate product design into internal or external mfg operations
Work with cross functional team members to support new product development including process & product formulation
Identify, justify and implement new process technologies for new and existing products to improve process capability, improve the value stream, and reduce total cost
Be willing to travel to address urgent manufacturing issues and experiment coverage
Bachelor's degree or higher in Chemical or Mechanical Engineering or from an accredited university
Experience with mechanical operations (coating, laminating, mixing, drying) and chemical processing (polymers, emulsions, solvent and water based coatings)
Wet chemistry lab experience
Successful record of executing results through project management or other project activity
Demonstrated cross function ability including product development projects

Manufacturing Technology Engineer Resume Examples & Samples

Minimum of four (4) years of experience working with or in manufacturing environments
Experience working with any combination of product line maintenance, process improvement, and/or quality
Five (5) or more years of experience in manufacturing working with diverse outsourced processes, including packaging
Knowledge and experience in applying Six Sigma tools, DOE, PPU or Lean principles
Successful record of Team or Project Leadership and Product Commercialization
Excellent interpersonal, organizational, analytical, communication and project management skills
Experience with SolidWorks and AutoCad software systems

Manufacturing Technology Engineer Resume Examples & Samples

Champion process equipment and process equipment improvements and implement equipment robustness within manufacturing
Lead Quality Investigations to determine root causes for process equipment deviations
Author, champion, and drive implementation of change controls for process equipment
Analyze the impact of equipment on process performance, collect and analyze data to identify improvements, and devise then implement robust solutions
Author protocols and final technical reports for process equipment studies. Review and approve cGMP documentation as required
Perform cleaning and mixing validation studies for the Syracuse site. Author and execute protocols and reports and monitor study execution in manufacturing
Collaborate closely with the process experts in Manufacturing Science & Technology and interface with scheduling, quality assurance, facilities and other Manufacturing and engineering functions
Participate in network-wide alignment and optimization of Manufacturing Technology business processes and equipment strategies and use expertise to assist in process technical transfer
Experience should include technical support of a cGMP Biologics manufacturing facility, including knowledge of drug substance processing equipment
Demonstrated problem solving ability, in-depth experience with manufacturing systems and equipment, good interpersonal, oral and written communication skills are essential. Operational Excellence experience and project management skills are desired
Good technical writing and data presentation abilities are requirements
Experience with regulatory agency inspections and regulatory responses is a plus