Process Automation Engineer Resume Samples
4.9
(112 votes) for
Process Automation Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the process automation engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
MB
M Beahan
Monroe
Beahan
7209 Marion Hills
Houston
TX
+1 (555) 290 9697
7209 Marion Hills
Houston
TX
Phone
p
+1 (555) 290 9697
Experience
Experience
Los Angeles, CA
Process Automation Engineer
Los Angeles, CA
DuBuque, Kuhlman and Zboncak
Los Angeles, CA
Process Automation Engineer
- Lead vendor selection and facilitate the implementation of new automation systems and manufacturing methods
- Research new manufacturing methods and trends to bring innovation into new technology into Pentair manufacturing
- Develop tooling and fixtures, and concept prototype assembly machines that result in a complete production automation system
- Continuously improve our factory automation systems and optimize them for cost and throughput
- Assure the quality of manufactured goods through the implementation of in process inspections and rigorous statistical process controls
- Standardization and automation of assembly processes as much as possible
- Design and support standardization of machinery and peripheral equipment and manufacturing processes
New York, NY
Process & Automation Engineer
New York, NY
Price-Rodriguez
New York, NY
Process & Automation Engineer
- Leading and executing technical activities and Programs within own responsibility area including reviews and relevant technical studies
- Management of small capital projects for new equipment/ technologies/ area improvements, liaising with equipment suppliers
- Trouble-shoot processing problems and assist in the operation of specialist pieces of equipment
- Leads problem isolation and resolution solving for serious problems
- Evaluate and implement new technologies and ways of working which enhance the performance of unit operations
- Provide proactive processing solutions (hardware and software) for the design and scale-up of novel processes in continuous processing, working alongside scientists in R&D manufacturing
- Ownership and management of development and process proving equipment
present
Dallas, TX
Senior Process Automation Engineer
Dallas, TX
Doyle-Shanahan
present
Dallas, TX
Senior Process Automation Engineer
present
- Standardize process automation solutions for Nutrition Infant Formula NAN, NIDO, Carnation, BEBA, Bear Brand, illuma, LACTOGEN
- Adapt, facilitate and standardize methodology for enabling process focus in Infant Formula and dairy lines by process control automation
- Develop further the Automation framework used for Process Automation Solution including documentation
- Roll out automation solutions to Dairy and Nutrition plants
- Support advanced process control applications and other efficiency improvements in
- Nutrition and Dairy plants
- Actively participate in the execution of investment projects managed by Nestlé Research
Education
Education
Bachelor’s Degree in Manufacturing Technology
Bachelor’s Degree in Manufacturing Technology
Kennesaw State University
Bachelor’s Degree in Manufacturing Technology
Skills
Skills
- Good knowledge of Project Management, Software Development and Software Management applications (e.g. Rally, ServiceNow, HP PPM, HP QC, etc.)
- Strong knowledge of Scaled Agile
- Strong knowledge of SDLC, ITIL and CMMI
- Strong Microsoft Visio Skills
- Ability to build and maintain effective work relationships, both internal and external, and establish credibility with business partners
- Ability to plan, organize, and prioritize time/workload and delegate work in order to accomplish tasks and meet deadlines
- Lean Six Sigma Master Black Belt (from a reputable institution)
- Skill and ability to use personal computers and enterprise software as well as evaluate, recommend, and use group specific software tools
- Strong Microsoft Office Skills (Excel, PowerPoint, Word, Outlook)
- Project Management Professional (PMP)
15 Process Automation Engineer resume templates
Read our complete resume writing guides
1
Senior Stamping Process Automation Engineer Resume Examples & Samples
- Support the design of transfer press automations through computer-aided simulations
- Create automation press curves from existing stamping plant equipment
- Program and develop software applications for automation and part handling, and apply Finite Element Analysis to solve stamping and structural design problems
- Coordinate stamping operations in support of new program launches, including determining tool and die specifications
- Interface with tooling engineers regarding product and die design, design for manufacturability, and quality assurance testing
- Develop automotive component manufacturing tools and dies in accordance with given specifications, including providing design support; process and determine automation requirements for progressive, tandem and transfer dies
- Maintain CAD data for data tracking and storage, and organize data exchange between customers and the Transfer Kinematics team
- Train Designers and Program Managers to maximize production speeds by optimizing die designs
- Supervise the Transfer Kinematics team
- Master’s Degree in Industrial or Mechanical Engineering, or foreign equivalent
- Will also accept Bachelor Degree and 5 years of applicable work experience
- 2 years of experience in a manufacturing or mechanical engineering position in the automotive industry
- Experience must include: sheet metal stamping and die processing, including associated FEA tools for formability simulation
- Die construction standards for draw, trim, flange, re-strike, cam trim, and flange operations, including stamping and transfer press automation simulation
- Unigraphics NX9 and CATIA CAD systems for parts and assembly design and surface modeling
- FEA analysis for stamping die strength validation and vibration analysis utilizing Nastran or LS-DYNA
- Programming Windows applications or MS Excel for motion calculations; and mechanism simulation and optimization utilizing MBD software, including customizing MBD software for press automation simulations
- Experience can be acquired concurrently
2
Dairy Process Automation Engineer Resume Examples & Samples
- Standardize process automation solutions for IF Nutrition plants and key dairy process units
- Adapts, facilitates and standardize methodology for enabling process focus in IF and dairy lines by process control automation
- Roll out of automation solutions to Dairy and Nutrition plants
- Supports advanced process control applications and other efficiency improvements in
- Experience in process automation engineering, preferable food, or exposure to process operations in a food Factory
- Experience in process focus applications or as corporate engineer of a market or similar
- Experience in project implementation in Factories
- Technical know-how in practical operations, incl. project management skills, planning and organization
3
Process Automation Engineer Resume Examples & Samples
- Utilize strong electrical and mechanical machine design skills, and develop technical requirements and specifications for outside vendors to bid and construct custom machines
- Research new manufacturing methods and trends to bring innovation into new technology into Pentair manufacturing
- Develop tooling and fixtures, and concept prototype assembly machines that result in a complete production automation system
- Participate on cross functional teams to ensure the design for manufacturability of our current and future products
- Continuously improve our factory automation systems and optimize them for cost and throughput
- Assure the quality of manufactured goods through the implementation of in process inspections and rigorous statistical process controls
- Bachelor's Degree in Mechanical Engineering or Electrical Engineering (or quivalent degree in Manufacturing Technology) is required
- 5+ years experience developing factory automation systems
- Strong problem solving skills and a fast learner
- Hands-on experience developing custom automated systems
- Familiarity with control systems, PLC's and control components
- Experience designing and fabricating tooling fixtures and jigs
- Experience with high volume, fully or semi automated manufacturing
- Six Sigma and DFM training preferred
- Ability to travel up to 25%
- Skilled at effective communications at both technical and leadership levels. Skills must include good interpersonal skills, as well as written and verbal communication skills, and ability to understand information and ideas as presented
- Skill in developing and delivering effective presentations
- Skill and ability to use personal computers and enterprise software as well as evaluate, recommend, and use group specific software tools
- Ability to build and maintain effective work relationships, both internal and external, and establish credibility with business partners
- Ability to plan, organize, and prioritize time/workload and delegate work in order to accomplish tasks and meet deadlines
4
Process Automation Engineer Resume Examples & Samples
- Responsible for project management & planning and for liaising with other departments/plants affected by these projects. Also for reporting project status to management and highlighting areas of concern early
- Responsible for ensuring all projects are completed to agreed timelines and within budget. Also that all work adheres to H&S and environmental requirements
- Responsible for planning and managing projects to ensure effective utilization of resources and for liasing with R&D and/or other Alcon facilities to develop and introduce new products and processes
- Responsible for initiating and driving cost improvement and LEAN Manufacturing initiatives
- Ensure continual Quality System compliance by adherence to established and evolving Alcon and Novartis QS requirements
5
Process Automation Engineer Resume Examples & Samples
- Standardization and automation of assembly processes as much as possible
- Design and support standardization of machinery and peripheral equipment and manufacturing processes
- Define and execute production automation strategies, footprint optimizations and road-maps
- Assist in implementing and managing the deployment of lean principles and techniques utilizing Lean and Six Sigma tools to introduce process improvements and cost reductions
- Drive initiatives for plant productivity increase, automation, material saving, and cost reduction
- Support department leaders and plant managers in aligning Automation activities with management goals and expectations as well as the road-maps and strategies
- B.S. of Engineering, with emphasis in mechanical, industrial or electrical engineering
- 5+ years of experience in machine design; preferably in sensors manufacturing
- Strong communication skills – Must be comfortable presenting to management team
- Ability to influence across the organization and work with global peers
- Strong project management skills are essential
- Strong background in technical concepts and machines / tools / production processes
- Innovative with a high level of creativity
- Experience with Software for Machine control
- Experience in Operational Excellence and Lean Manufacturing tools is preferred
- Knowledge of Statistical Process Control (SPC)
- Knowledge of PPAP and FMEA
- Experience in Lean Manufacturing Practices & Methodologies (Kaizen, 5S, Value Stream Mapping) and line balancing
- Specific knowledge of CAD
- Must be a US Person or PRC holder due to access products and technology controlled under the ITAR & EAR
- Experience with design optimization and process automation
6
PLC Process Automation Engineer Resume Examples & Samples
- Bachelor of Science in Engineering or Technology Degree
- 3 years experience with implementing and supporting PLC based automation solutions in a process manufacturing environment
- Knowledge of PLC process automation systems including hardware and software platforms such as: Allen Bradley / Rockwell PLCs( PLC5, SLC, Logix), RSLogix, RSLinx, Kepware, Wonderware, AssetCentre, PanelBuilder, FactoryTalk
- Language Requirement – English
- Strong communication and networking skills
- Teamwork and interpersonal skills
- Previous experience with Lilly deviation and change control process
- Previous configuration and programming experience with Emerson DeltaV control systems
- Experience working in a regulated environment for 2 years
- Understanding of S88
- Familiar with control theory
- Validation experience and working knowledge of cGMPs
- Professional Engineering License
7
Process Automation Engineer Resume Examples & Samples
- Safety is a top priority at The Dow Chemical Company. Every individual at Dow must consider safety to be his/her most important responsibility
- Lead process control team(s) responsible for implementation of process control solutions to capture improvement opportunities
- Set aggressive project improvement goals, and plan, track and drive the implementation team to achieve those goals
- Develop process control strategies for process technologies
- Program control applications for various distributed control systems
- Write simulation applications in order to verify functionality of the control program and for training plant operators
- Participate in project commissioning and startup activities, including tuning of control loops
- Provide training of chemical facility/Utility operations personal
- Deliver value to Dow businesses through effective use of asset utilization and project work processes
- Lead process control improvement investigation team(s) per Dow's work process methodology
- A Bachelor's of Science Degree in Engineering is required
- 3 years of experience in the Chemical or Petrochemical industry is required (5 years preferred)
- Broad knowledge and skills in all aspects of Process Control Engineering is required
- Experience and In-depth knowledge of applying distributed control systems
- The candidate must have demonstrated leadership, planning, technical, organizational skills, communication skills and have the ability to work within a diverse team environment
- Must be registered or eligible for registration with the Association of Professional Engineers and Geologist of Alberta (APEGA)
- Must be legally authorized to work in Canada without company support or sponsorship
- Degree discipline in Chemical, Automation, Mechanical or Electrical Engineering is preferred
- 3 years in a manufacturing environment is preferred
- Strong technical background with plant troubleshooting skills is preferred
- Experience on Mod 5, ABB XA800, DeltaV and/or Triconex is preferred
- Experience on industrial state based control and advanced control is preferred
- Experience on Aspen InfoPlus.21 and SQL Plus is preferred
- Knowledge of safety instrumented systems (SIS)
8
Process Automation Engineer Resume Examples & Samples
- The process automation (PA) engineer is responsible for tasks such as those listed below when equipment or instruments are being added, removed, or changed. The PA engineer is also involved in Safety Integrity Level (SIL) determination, Safety Instrumented Systems (SIS), and designing or modifying the basic process control system (BPCS). During project phases, the PA engineer works closely with chemical plant operators, manufacturing representatives, instrument engineers, process engineers, electrical engineers, vendors, and other key stakeholders. A primary responsibility for the PA engineer is designing the control strategy and control systems, as well as implementation, which is not typical within the industry
- Bachelor’s in Chemical, Electrical, Mechanical Engineering or Computer Engineering or Science with process control experience
- 2 + years experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/utilities, and/or paint coatings industry
- Knowledge in one or more of the following: ABB industrial IT, Honeywell, Mod V, Foxboro, Delta V, Triconex, and/or Emerson distributed control systems
- Experience in developing functional requirement specifications (FRS) for chemical process equipment
- Experience with problem solving / troubleshooting and data analysis
- Highly effective initiative, teamwork, organization, communication, leadership, continuous learning, and interpersonal effectiveness
- Experience working with batch and continuous operations processes
- Experience with many types of pressure, level, temperature, and flow instrumentation
- Understanding of interactions between distributed control systems (DCS), information systems (IS), supervisory control and data acquisition systems (SCADA), manufacturing execution systems (MES), etc
- Experience working with external contractors / engineering procurement contractors (EPC) on process automation projects
9
Process Automation Engineer Resume Examples & Samples
- Applies Global Project Methodology (Global Project Methodology) and Process Automation Work Process Discipline
- Ensures that the project’s automation scope is well defined and meets the business needs in a cost effective manner
- Ensures that the process automation is safe, meets DOW LPP’s and other EH&S requirements
- Complete reverse engineering work process to document details of the current legacy control program (Dowtran) into functional specification documents (PCSDs)
- Provides input to project schedule and plans, then monitors progress against the plans
- Ensure discipline design deliverables for their discipline meet the needs of the project: functions as intended, on time and within budget
- Identifies technical problems and Provides feedback to the migration program through the PA Lead and Migration Program PA Lead SME on ways to improve the work process and tools for future migrations
- Programming of control applications for various distributed control systems. Writing simulation applications and control codes in order to verify functionality of the control program and for training plant operators
- Develop simulation code to adequately test the new control logic and train operations
- Train the operations resources identified so that they can train the operators
- Serve as a member of the project steering team, along with other discipline leads
- Min. 8 years of experience
- Master’s Degree in Process Automation (Specialization Programming)
- Broad knowledge and skills in all aspects of Process Automation
- Knowledge of unit operations and Chemical Engineering fundamentals
- Strong technical knowledge chemical engineering and process control principles
- Strong technical knowledge of programming techniques specific to both the Mod 5 and ABB 800xA logic solvers
- Strong Excel skills to enable effective use of the work process
- Strong interpersonal skills to interface with plant and program personnel
- Attention to detail to enable accurate assessment of the current Mod 5 functionality and effective implementation in ABB 800xA
- Change Management and in Experience Leading Teams
- Six Sigma Green Belt Project Leader or Black Belt Certification
- Business fluent in English and good knowledge of German language
10
Process Automation Engineer Resume Examples & Samples
- Complete the migration of Dowtran to ABB code, following the Migration work process, under the direction of the PA Lead
- Consider safety to be the most important responsibility – both personal safety and incorporation of process safety into the control application
- Work with operations to understand details of how the process currently runs
- Conduct reviews of e-PCSDs with operations, to ensure that the Dowtran has been captured correctly
- Complete the re-engineering work process to modify the control strategy for implementation in the commercial DCS. Incorporate required control strategy modifications as agreed with operations and business leadership
- Conduct reviews of PCSDs with operations, to ensure that the PCSDs accurately reflect the way the new control code is to be written
- Complete the control application code, incorporating the finishing details into the code generated by the forward engineering tools
- Develop graphics
- Complete checkout of the new control application in simulation. Document checkout results in the checksheets supplied by the migration program
- Review simulation code with operations
- Be present for operator training as needed to manipulate simulation, answer questions, etc., in support of the operations resources who are conducting the training sessions
- Provide startup coverage to help troubleshoot any issues with the new application. Be available to answer questions from operations as needed
- Update to the application as needed to address issues identified during startup. Document all changes in the change log. Provide the change log as input to the Management of Change document (MOC) that will be circulated by operations
- Be present during production code loads as needed, serving as the second set of eyes and supporting the plant process control focal point
- Assist the MES team to identify tagnames and tag paths in the new control application as needed
- Provide feedback to the migration program through the PA Lead and Migration Program PA Lead SME on ways to improve the work process and tools for future migrations
- In the case of experienced applicants who would serve in a PA Lead role, the following additional leadership responsibilities apply
- Establish detailed planning of project PA resources
- Track progress, schedules, and costs for the PA team during all project phases
- Complete technical review of the deliverables of the PA team and provide coaching / constructive feedback
- Work with operations to define testing scenarios and oversee the simulation of the control program to test the strategy
- Develop User Requirement Specification (URS) for the system
- Estimate the process control cost and schedule for the project based on guidance from the Migration Program and details of the specific project
- Assemble final process control costs associated with the project
- Minimum of 2 years experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/ utilities, and/or paint coatings industry is required. 5 or more years is preferred
- Experience applying ABB Industrial IT distributed control systems, or similar systems
- Familiarity with Microsoft Excel
- Experience with control system migration projects
- Production experience with continuous and batch operations
- Experience with MOD 5 Dowtran programming
- Familiarity with control system hardware
- Familiarity with manufacturing execution systems (MES) systems
- Understanding of interactions between distributed control systems (DCS), manufacturing execution systems (MES), information systems (IS), supervisory control and data acquisition systems (SCADA), etc
11
Process Automation Engineer Resume Examples & Samples
- Process Safety and Safety in Design: Understand and apply DOW SIS Work Process including LPP 1.8 (LOPA), LPP 15.2. (Basic Process Control Protective Systems) & 15.4 (Safety Instrumented Systems)
- Project Execution: Provide excellent Automation Design to meet Business Partners’ needs in terms of safety, control, operability & downstream data processing of production processes. The expectation of an Error-Free-Engineering of PA HW & SW mindset: Process Control Specifications. Application Package (Software or Hardware). SIS Programming (if applicable). Simulation Packages (if applicable). Operator Training. Commissioning and Start-Up support
- Competitive Cost Engineering: 1) Minimize Overhead Activities. 2) Constantly improve the Hrs/IO productivity ratio. 3) Rework reduction
- Customer Satisfaction: Understand Clients’ expectations for the projects and deliver against those expectations. Obtain client feedback about how well expectations were met
- Six Sigma Engagement: Application of 6 Sigma Methodology & Tools to positively impact project metrics & value creation
- Cost Recovery: Accountable that personal hours recovery is according to the annual capacity plan
- Degree level qualification or equivalent in Chemical Engineering
- A total commitment to Health, Safety and Environmental programs
- High technical capabilities
- English language proficience
- Knowledge and experience in chemical plant processes would be an advantage
- Six Sigma certification would be an advantage
12
Process Automation Engineer Resume Examples & Samples
- Leadership in implementation and coordination of all PA activities at FRP Voranol & SPC plants
- Assist with the implementation of business-supported projects as included in the Plant Specific Technology Plan
- Partner with plant operations and tech center personnel to gather and analyze data, identify gaps, evaluate and prioritize improvement and project opportunities
- Validate improvement opportunities using global tools and economic analysis and assist in building/revising the Plant Specific Technology Plan
- Design of functional specifications for Process Automation systems (hardware or software) by applying plant and work-process discipline knowledge
- Develop, test and commission Process Automation software and operator interface software to meet design criteria
- Provide day to day plant support, and coach plant personnel on use of automation systems
- Training, coaching, follow-up of external control engineers in supplying process control solutions for the plant
- 3 years experience in process control applications
- Ability to manage multiple projects/tasks at one time
- Familiar with plant operations as well as project work in plant manufacturing
13
Process Automation Engineer Resume Examples & Samples
- Coach and mentor team members in the effective use of Six Sigma methodologies, Dow project work processes and reducing variability of project deliverables
- Developing process control strategies for process technologies
- Programming of control applications for various distributed control systems
- Writing simulation applications in order to verify functionality of the control program and for training plant operators
- Deliver value to Dow businesses through effective use of Six Sigma methodologies, asset utilization and project work processes
- Lead process control improvement investigation team(s) as per Dow's work process methodology
- Deliver the identified value, and meet the agreed upon project milestones
- Some domestic and international travel may be required
- Must be willing to work on projects at different geographies / locations
- Bachelor of Science Degree in Chemical Engineering / Instrumentation and Process Controls Engineering
- Broad knowledge and skills in all aspects of Process Control Engineering with a minimum of 5 years in a process control role
- Production experience is strongly preferred, but not required
- Control system migration project experience is preferred
- In depth knowledge of applying distributed control systems concepts on platforms such as (ABB, Honeywell, Yokogawa, Foxboro)
- Certified 6 Sigma Green Belt is preferred, but not required
14
Process Automation Engineer Resume Examples & Samples
- Developing a working knowledge of the mill models and control systems
- Evaluating operating schedules, and associated setup parameters, for compatibility with process capabilities
- Monitoring performance of mill setup models and control system and making real-time adjustments to the setups and technical controls, within prescribed limits, to maintain the required performance parameters of the process
- Identifying and communicating problems observed during rolling/heating
- Analyzing problems and completing analysis projects to improve process performance
15
Process Automation Engineer Resume Examples & Samples
- Participation in the safety program
- Monitor and maintain the performance of the Process Automation (L2) systems
- Maintain and enhance system documentation as necessary
- Design, implement, and test changes to Level 2 systems
- Work with personnel on the shop floor as needed to evaluate, support and improve the manufacturing systems/processes
- Participate in, and when necessary lead, continuous improvement activities
- Create reports and analyze system and operational data
- A full commitment to ensure a safe and healthy work environment
- A high degree of technical skills corresponding to the candidate experience level
- The ability to provide technical leadership in the automation systems area
- Strong personal initiative ("self starter")
- A structured approach to problem solving and maintaining systems with the associated attention to detail
- Object Oriented Programming (C++, C#, Java)
- CORBA-based C++ Application Framework & Visual C++ or .NET Framework
- Code management/collaboration tools (TortoiseSVN)
- MS SQL Server or Oracle DB,
- Unix utilities
- Statistical Process Control
16
Intern Process Automation Engineer Resume Examples & Samples
- Engage with operations teams and other Improvement and innovation individuals in the discovery and definition of well-structured automation projects
- Participate in the planning stages of the automation solution
- Collaborate in the design of the final solution and work directly in the development of the solution
- Lead the testing phases of the final solution and support the deployment of the final solution with end users
- Generate the internal and user documentation of the Software solutions
- Support in the post-release adjustments of the software solution
- Measure value impact of the implementation of the final solution
- University Student of last semesters of systems engineering, computing engineer or electronics engineer
- Self-starter & motivated individual
- Excellent attitude and commitment
- Excellent communication & collaboration skills
- Very good analytical skills
- Able to generate structured software solutions
- Good Knowledge on C# programming & SQL
- Java, VB programming skills are a plus
- MS Sharepoint development skills is a plus
- Skills on MS office (excel, power point, Visio, word)
- Knowledge on Agile PM
- SAP knowledge is a plus
- Fluent in English (spoken, written)
17
Process Automation Engineer, Level Resume Examples & Samples
- Design, implement and test changes to Cold Rolling Mill Level 2 software, databases, servers, and HMI systems
- Ensure and optimize availability, performance, and quality of Cold Rolling Mill Level 2 systems
- Manage assigned Cold Rolling Mill Level 2 automation projects
- Fulfill the commitment to ensure a safe and healthy work environment
- Fulfill the responsibilities required to achieve the Quality Commitment
- Demonstrate commitment to teamwork by fostering an environment that embodies trust and respect
- Ensure working knowledge of competencies as defined in ISO 14001:2004 and TS16949:2009
- Experience with C++ or .NET Framework, MS SQL Server or Oracle DB, Visual Studio, Windows Server required
- Good understanding of process automation applications in a manufacturing environment
- Steel experience a plus (Hot-/Cold-Rolling preferred)
- Demonstrated analytical and logical skills
- Self-starter with proactive attitude
- Structured approach and attention to detail
- Interest and ability to work at our site operations in Calvert, Alabama
18
Senior Process Automation Engineer Platforms Resume Examples & Samples
- Develop further the Automation framework used for Process Automation Solution including documentation
- Roll out automation solutions to Dairy and Nutrition plants
- Provide support for effective project execution for investment projects in Factories and Markets
- Build / disseminate knowledge / expertise including participation in workshops & training sessions, such as training for Engineers / Technologists
- As senior engineer, coach and integrate new engineers within the team
- Process Automation Engineering or equivalent university degree
- 5 years and plus experience in process automation engineering, preferably in the Food industry, or exposure to process operations & advanced process control concepts
- Technical know-how in practical operations, incl. project management skills, planning and organization (documentation of the Automation framework)
- Experience in transferring knowledge (trainings, coaching, workshops facilitation)
19
Senior Process Automation Engineer Resume Examples & Samples
- Standardize process automation solutions for Nutrition Infant Formula NAN, NIDO, Carnation, BEBA, Bear Brand, illuma, LACTOGEN
- Adapt, facilitate and standardize methodology for enabling process focus in Infant Formula and dairy lines by process control automation
- Support advanced process control applications and other efficiency improvements in
- Nutrition and Dairy plants
- Actively participate in the execution of investment projects managed by Nestlé Research
- Actively participate in the technical assistance to Markets & Factories
- Experience in Automation Platform Rockwell & Wonderware
- Experience in project implementation in factories
- Fluent in English and preferable other languages (German, French, Spanish...)
20
Process Automation Engineer Resume Examples & Samples
- Applies Global Project Methodology (GPM) and Process Automation Work Process Discipline
- Ensures that the project scope is well defined and meets the business needs in a cost effective manner
- Ensures that the process automation is safe, meets Dow Loss Prevention Policy’s and other Environmental Health & Safety requirements
- Drives project execution within their discipline
- Identifies technical problems and appropriately engages the business tech. center and SME network to resolve
- Programming of control applications for various distributed control systems. Writing simulation applications in order to verify functionality of the control program and for training plant operators
- Establish detailed planning of project process automation resources
- Track progress, schedules, and costs for the process automation team during all project phases
- Complete technical review of the deliverables of the Process Automation team and provide coaching / constructive feedback
- Minimum of 2 years experience in one or more of the following industries is required. (5 or more years is preferred)
- Chemical
- Plastic
- Petrochemical
- Gas/oil
- Pharmaceuticals
- Pulp/paper
- Power/ utilities
- Paint coatings
- Electrical
- Computer Engineering
- Science with process control
21
Senior Robotics Process Automation Engineer Resume Examples & Samples
- Design and implement and maintain Robotics infrastructure
- Mentor development teams
- Perform Tollgate 1 and 2 reviews (solution design document and code reviews) in our Robotics SDLC
- Develop of reusable robot code / libraries supporting the whole robot estate
22
Process Automation Engineer Resume Examples & Samples
- The Process Automation (PA) engineer is responsible for tasks such as those listed below when equipment or instruments are being added, removed, or changed. The PA engineer is also involved in Safety Integrity Level (SIL) determination, Safety Instrumented Systems (SIS), and designing or modifying the basic process control system (BPCS)
- During project phases, the PA engineer works closely with chemical plant operators, manufacturing representatives, instrument engineers, process engineers, electrical engineers, vendors, and other key stakeholders. A primary responsibility for the PA engineer is designing the control strategy and control systems, as well as implementation, which is not typical within the industry
- A minimum of 3 years experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/ utilities, and/or paint coatings industry is required, but prefer 5 or more years
23
Process Automation Engineer Resume Examples & Samples
- Be an active member of the DCS migration team
- Develop Process Control Strategy Documentation
- Develop Process Control Coding and functional specifications (DCS) and Operator Interface graphics
- Develop Simulation Code to test Process Control code and for training purposes
- Give training on the assigned areas
- Process Control program loading, plant startup assistance, controller tuning and other adjustments
- Improve Process Control performance
- Bachelor or Master of Applied Science Degree in Engineering is required. Chemical Engineering, E&I or Mechanical is preferred
- 3-5 years Manufacturing or Engineering experience preferred but we also encourage recently graduated engineers to apply
- Fluency in English is required, local language for location is preferred
- Occasional travel will be required
24
Process Automation Engineer Resume Examples & Samples
- Serve as the process automation support for Plant Operations
- Support the efforts of the team by using Business Most Effective Technology, Global Project Methodology and the Global Process Automation Work Process Discipline
- Work with improvement and manufacturing teams, engineering personnel, and technology center representatives to identify, evaluate and implement capital and non-capital improvement projects
- Support the Layers of Protection Analysis (LOPA) implementation efforts
- Timely and qualitative completion of Process Control deliverables
- Development of Process Automation codes for capital projects
- Support the existing Process Control Optimization Applications and develop Advanced Control & Optimization for additional improvements
- Support Six Sigma teams to improve process automation
- 5 years of experience with process control is required
- Knowledgeable about Layers of Protection Analysis (LOPA)
- Prior experience in the distillation/reaction process controls is preferred
- Knowledgeable about Mod V process automation systems is preferred
25
Process Automation Engineer Resume Examples & Samples
- Participate in process automation team(s) responsible for implementation of process automation solutions to capture improvement opportunities
- Meet aggressive project improvement goals, and plan, track and drive the implementation to achieve those goals
- Develop process automation strategies for process technologies
- Programming of automation applications for various distributed control systems
- Writing simulation applications in order to verify functionality of the automation program and for training plant operators
- Perform process automation improvement investigation(s) as per Dow’s work process methodology
- A Masters degree in Chemical, Electrical or IT Engineering (or equivalent Process Automation/Chemical Industry experience) is required
- Broad knowledge and skills in all aspects of Process Automation Engineering with a first experience in a process automation role is preferred, not required
- In depth knowledge of applying ABB Industrial IT distributed control systems is preferred, not required
26
Process Automation Engineer Resume Examples & Samples
- Responsible for planning, development, debug, installation, testing, validation and support of Control System Software projects
- Responsible for working with team in validating upgraded equipment and/or new process automation projects from design through completion and in compliance with regulatory requirements
- Responsible for GAMP documentation development and approvals e.g. URS, FDS, FAT, SAT, IOPQ etc
- Responsible for aiding the project manager and for liaising with other departments affected by these projects
- Responsible for ensuring all projects are completed to agreed timelines and within budget
- Responsible for ensuring all work adheres to H&S and environmental requirements
27
Process Automation Engineer Resume Examples & Samples
- Responsible for planning, development, debug, installation, test, validation and support of Data Acquisition and/or Control System Software projects
- Responsible for introducing and validating new equipment and/or complex new process automation projects from design through completion and in compliance with regulatory requirements
- Responsible for development and management of GAMP documentation e.g. URS, FDS, FAT, SAT, IQ and PQ etc
- Responsible for supporting and improving existing processes through process performance monitoring, analysis, process control, and the application of engineering principles
- Responsible for project management and planning and for liaising with other departments/plants affected by these projects. Also for reporting project status to management and highlighting areas of concern early
- Responsible for planning and managing projects to ensure effective utilization of resources and for liaising with R&D and/or other Alcon facilities to develop and introduce new products and processes
- Knowledge and practical experience of process, equipment, automation engineering projects and GAMP validation requirements
- Strong background in Allen Bradley ControlLogix and CompactLogix PLCs, iFix SCADA, Microsoft SQL Server
- Experience in designing, configuring and deploying a data Historians, ideally OSISoft PI Historian
- Experience in designing, configuring and deploying SPC Packages, ideally in InfinityQS SPC MI
- Accustomed to working in a validated environment with strong discipline with regard to change control
- A good understanding of 21 CFR Part 11 requirements
- Additional knowledge of laser printer systems, vision systems, robotics, and BCR systems is beneficial
- Ability to organize, plan and execute multiple tasks to tight schedules, be highly motivated self-starter with excellent communication skills and have a well-developed project management skillset
- Data warehouse implementation
28
Process & Automation Engineer Resume Examples & Samples
- Practical knowledge of control system (DeltaV) implementation and coding experience
- Highly effective interpersonal, organisational and communication skills for working in a multi-disciplinary scientific team environment
- Work experience in a pharmaceutical or GMP compliant business preferred
- Hands-on and practical ability in process development with experience in the application of state-of-the-art engineering laboratory equipment
- Practical knowledge of process hardware including pumps, thermocouples, reactors, separators, flow-meters etc
- GMP commissioning and validation
- An understanding of health and safety legislation (e.g. COSHH, HAZOP, DSEAR, PUWER etc)
- Provide proactive processing solutions (hardware and software) for the design and scale-up of novel processes in continuous processing, working alongside scientists in R&D manufacturing
- Evaluate and implement new technologies and ways of working which enhance the performance of unit operations
- Effectively contribute to the development of end-to-end process understanding and control of the manufacturing process, by integrating broad knowledge of each unit operation
- The role will require occasional support of development activities on a shift basis (double days or 24/5 working patterns) and may require travel
- Trouble-shoot processing problems and assist in the operation of specialist pieces of equipment
- Responsible for process and equipment risk assessments
- Provide training support where required
- Management of small capital projects for new equipment/ technologies/ area improvements, liaising with equipment suppliers
- Work with other GSK sites to develop and harmonise control systems and equipment platforms
- Ownership and management of development and process proving equipment
- Integration of equipment and control systems to support technologies used in development and proving
- Ensure appropriate qualification of new equipment/facilities and lead commissioning activities
- Ensure equipment is kept in a ready, fit and compliant state (safety and quality)
- Project management, planning and execution of the campaign to schedule, overseeing the campaign from a technical standpoint as part of a multi-disciplinary technology team
29
Process Automation Engineer Resume Examples & Samples
- The process automation (PA) engineer is responsible for tasks such as those listed below when equipment or instruments are being added, removed, or changed. The PA engineer is also involved in Safety Integrity Level (SIL) determination, Safety Instrumented Systems (SIS), and designing or modifying the basic process control system (BPCS)
- 2 + years experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/utilities, and/or paint coatings industry is required
- Experience with problem solving / troubleshooting and data analysis is required
- Highly effective initiative, teamwork, organization, communication, leadership, continuous learning, and interpersonal effectiveness is required
- Knowledge in one or more of the following: ABB industrial IT, Honeywell, Mod V, Foxboro, Delta V, Triconex, and/or Emerson distributed control systems is preferred
- Experience in developing functional requirement specifications (FRS) for chemical process equipment is preferred
- Experience in executing process control projects is preferred
- Experience working with batch and continuous operations processes is preferred
- Experience with many types of pressure, level, temperature, and flow instrumentation is preferred
- Understanding of interactions between distributed control systems (DCS), information systems (IS), supervisory control and data acquisition systems (SCADA), manufacturing execution systems (MES), etc. is preferred
- Experience working with external contractors / engineering procurement contractors (EPC) on process automation projects is preferred
- Knowledge of safety instrumented systems (SIS) is preferred
30
Driven Process Automation Engineer Resume Examples & Samples
- Designs electrical control panels and control systems by applying knowledge of electricity, materials, and instrumentation/control equipment
- Incorporates specifications and requirements into system designs and specifies and requisitions equipment accordingly
- Coordinates and supervises design requirements with designers
- Assures product quality by designing electrical testing methods; testing finished products and system capabilities
- Coordinates, supervises and inspects the activity of electricians performing system wiring both in-house (skid systems) and at customer sites
- Provides electrical checkout of systems in-house and at customer sites
- Generates detailed process Functional Descriptions (FDs) from general process descriptions handed over from the product departments
- Coordinates with the product departments to ensure the programming will meet their requirements
- Coordinates with Process Controls Manager to fully understand the Process Control Department standards, and to implement those concepts in the control systems
- Designs software applications by applying knowledge of computer programs, systems, and networks, and/or by supervising and coordinating the design done by subcontractors
- Bachelor Degree in Electrical/Process Control/Automation Engineering or related discipline
- 2+ years of technical Process Control/Automation experience
- Traveling as required up to 25% - Occasional international travel may be required
- Team player who is focused on both personal performance and Company success
- Ability to expand job responsibilities and collaborate with others to generate ideas and improve processes
31
Process Automation Engineer Resume Examples & Samples
- Responsible for observation, training and improvement regarding all process control systems activities at plant level incl. programming
- Technical part as run plant engineer with optimization of plant processes
- Responsible for the technical reliabilityof the plant
- Proactive in changes of working procedures
- Realization of improvements and implementation of small project
- Development of suggestions for the accomodationof changed terms for equipment and process control systems
- Find answers for special operation problems at the plant
- Realization all requirements regarding Environmental, Health and Safety (EH&S)
- Participation at our plant readiness activities
32
Process Automation Engineer Resume Examples & Samples
- The Process Automation (PA) engineer is responsible for tasks such as those listed below when equipment or instruments are being added, removed, or changed. The PA engineer is also involved in Safety Integrity Level (SIL) determination, Safety Instrumented Systems (SIS), and designing or modifying the basic process control system (BPCS). During project phases, the PA engineer works closely with chemical plant operators, manufacturing representatives, instrument engineers, process engineers, electrical engineers, vendors, and other key stakeholders. A primary responsibility for the PA engineer is designing the control strategy and control systems, as well as implementation, which is not typical within the industry
- A minimum of 2 year experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/utilities, and/or paint coatings industry is required, but prefer 5 or more years
- Understanding of interactions between distributed control systems (DCS), information systems (IS), supervisory control and data acquisition systems (SCADA), manufacturing execution Systems (MES), etc
33
Principal Process Automation Engineer Resume Examples & Samples
- Review system process documentation, data and trends, existing automation catalogue, and recommend immediate and permanent problem remediation and resolution
- Work with operations teams, regions and clients to identify and understand recurring complex processes that may require automation
- Design and implement automatic processes and problem remediation based on inputs from operations teams or own observations
- Make provision and implement custom scripts where applicable (batch, any shell, Perl, PHP)
- Keep track of automation modules’ performance, and collect and compile statistical reports
- Demonstrate excellent communication skills (both verbal and written)
- Display strong interpersonal skills and use these to interact with a variety of stakeholders
- Individual should ethical and hardworking
- Display good attention to detail
- Demonstrate the ability to apply analytical skills to identify problems
- Possess the ability and willingness to learn new systems and processes
- Possess the ability to translate complex concepts into comprehensive or simplistic terms
34
Process Automation Engineer Resume Examples & Samples
- Expert knowledge of LEAN, Six Sigma tools and methods, Business Process Management, Change Management and Business Process Re-engineering (7+ years in senior transformation roles)
- Skilled program/project management, demonstrated experience managing large scale global cross-functional programs/projects within scope and budget
- Skilled at value-stream mapping, process and data analysis as well as Voice of Customer techniques
- Self-driven, self-managed, energetic, passionate and motivated with the ability to work independently to deliver results
- Strong Microsoft Office Skills (Excel, PowerPoint, Word, Outlook)
- Good knowledge of Project Management, Software Development and Software Management applications (e.g. Rally, ServiceNow, HP PPM, HP QC, etc.)
- Lean Six Sigma Master Black Belt (from a reputable institution)
- Scaled Agile Coach (from a reputable institution)
- Master’s Degree (desirable)
35
Process Automation Engineer With Lean Resume Examples & Samples
- Skilled with creating balanced scorecards and performance management techniques
- Strong written and verbal communications skills with the ability to cultivate support, lead change and drive acceptance at all levels of the organization, up to and including the Executive level
- Team player and collaborative working style to implement change
- Strategic, disciplined and organized with the able to establish and manage goal delivery
- Strong coaching, mentoring and facilitation skills
- Innovative and creative thinking
- Adaptable and agile, can conform to shifting priorities, demands and timelines and make project adjustments to effectively prioritize and execute tasks in a high pressure environment
- Strong knowledge of Scaled Agile
- Strong knowledge of SDLC, ITIL and CMMI
- Strong Microsoft Visio Skills
- Consulting experience (desirable)
- Previous machine learning, AI (artificial intelligence) and design thinking experience a plus
36
Process Automation Engineer Resume Examples & Samples
- 1 year of experience in the Chemical or Petrochemical industry is required (3 years preferred)
- Knowledge and skills in all aspects of Process Control Engineering is required
- Experience and knowledge of applying distributed control systems
37
Process Automation Engineer Resume Examples & Samples
- A primary responsibility for the process control engineer is to design the control strategy and control systems, configure and implement the DCS application and provide commissioning and start-up support
- The process control engineer is also involved in Safety Integrity Level (SIL) determination, Safety Instrumented Systems (SIS), and designing or modifying the basic process control system (BPCS)
- During project phases, the process control engineer works closely with other members of the capital project team as well as vendors and plant operators
- Establish project goals and planning
- Track progress, schedules, and costs for the PC team during all project phases
- Complete technical review of the control teams work and provide coaching / corrective feedback
- Determine testing scenarios and oversee the simulation of the control system to test the strategy and improvements
- 2 + years experience in the chemical, plastic, petrochemical, gas/oil, pharmaceuticals, pulp/paper, power/utilities, and/or paint coatings industryExperience working with batch and continuous operations processes
38
Process Automation Engineer Resume Examples & Samples
- Assess, support and proactively improve the current DeltaV control system software, configuration, and VB scripts
- Complete risk assessments for all DeltaV program and configuration changes; analyze, code and formally test the proposed changes on DeltaV Simulation system; implement changes on the Production system
- Under a guidance of senior staff members, become a SME for the assigned Fractionation and Purification processes and associated controls
- Troubleshoot and diagnose process, instrumentation and controls issues to support batch and continuous manufacturing operations
- Support PLC/HMI, stand-alone controller and relay-based control systems for various equipment such as blast freezer, COP skids, plasma bottles and bags conveying and handling machines
- Lead automation and controls work for the multiple small or medium functional projects and/or support a large capital/functional project. Engineer and manage process equipment/control systems reliability improvement, optimization, upgrades as well as the new equipment control systems implementation from the concept to commissioning and validation. Ability to prioritize multiple tasks
- Develop and formally execute Control System/Equipment Installation, Operation and Performance Commissioning protocols for modified or new equipment and control systems. Assist in preparation and execution of the Qualification protocols
- Review, continuously update or create and standardize across the site current technical documentation and drawings for DCS and PLC based control systems: User Requirement Specifications, Functional Specifications, Design Specifications, electrical/control drawings, control network diagrams, system configuration, control components h/w and s/w settings, panel layouts; BOMs, and Spare Parts lists
- Review and update Standard Operation and Preventive Maintenance Procedures for the existing equipment and control systems
- Partner with Process, Production Automation, and Reliability Engineering groups, Refrigeration, Maintenance and Metrology personnel to assure continuous improvements in production operations and increase throughput
- Train Control System, Instrumentation and Metrology technicians on control system functionality, instrumentation configuration, troubleshooting and diagnostic methods and techniques. May supervise/coordinate technicians on assigned work
- Train Quality Operation, Compliance and Manufacturing personnel on DeltaV functionality
- Proficient in MS Office, MS Project, Visio, Windows XP/7
- Display a solid understanding of theories/practices utilized by other disciplines outside of the primary area of expertise
- Must be able to provide solutions that reflect understanding business objectives and cost implications
- Ability to convince management on courses of action with minimal assistance using both written and verbal methods
- Effectively operate in cross-functional teams, coordinate contractors, and direct activities of technicians without guidance
- Successful track record of managing wide-ranging activities within the business unit
- Excellent communication, organizational and technical writing skills; willing to work in a team environment. Self-motivated, ready to work with minimum supervision; responsible, reliable
- BS in Electrical, Computer Science, Chemical or Biomedical Engineering is required
- 3-5 years of Engineering experience in manufacturing environment, preferably in pharmaceutical or food processing facilities, specifically Plasma fractionation and purification design and support, installation and commissioning of projects; or 5 years, working as a system integrator or Control System/Process Engineer in Engineering Design firm
- 5 years of experience with Distributed Control System configuration and operation, especially Emerson DeltaV and Siemens Apogee/Insight. Experience with DeltaV Batch Processing Automation, module, and phase programming
- Experience with manufacturing systems and equipment: Compressed gasses, WFI, RO, filter presses, centrifuges, process vessels with associated instrumentation, CIP skids, conveying and disposition machines
- Working knowledge of PFD, P&ID and loop diagram standards; temperature, pressure, flow, weight, humidity, conductivity, pH measurement, and instrumentation
- Familiarity with pharmaceutical industry standards for batch control systems, software development life cycle methodologies, 21 CFR Part 11, and GAMP
- Experience in PLC/HMI controls, hands-on experience with VFDs, stand-alone controllers, recorders, control relays, sensors, and switches
- Experience with “hands-on” troubleshooting with some of the following systems: Apogee InSight DB, Allen Bradley PLCs and PaneView Human Machine Interfaces (HMIs), DeltaV hardware and software. Hands-on experience with DeviceNet, ControlNet, Fieldbus and Ethernet industrial networks
39
Senior Process Automation Engineer Resume Examples & Samples
- Lead and support of capital projects. This role involves the application of advanced automation engineering principles in the design, specification, construction, startup, and validation of process equipment and systems for capital projects of significant scope and complexity
- Lead and support technical root cause analysis, incident investigations, and troubleshooting on process control issues related to electrical, instrumentation and control systems
- Lead and support new product introductions or new technology introductions by performing engineering assessments, implementing automation system configuration changes and supporting engineering runs
- Devise new approaches to complex problems through adaptations and modifications of standard automation technical principles
- Work closely with multiple disciplines, including manufacturing, process engineering, utility operations, maintenance, quality assurance, and validation to manage a diverse portfolio of projects
- Provide technical support to commercial and clinical manufacturing as needed
- Develop and execute strategic initiatives for long-range planning and life-cycle upgrades of various Automation platforms. Activities include managing a 5 year road-map of systems, presenting high level scope and cost estimates to executives for annual capital funding plan, and project management of initiatives once approved for execution
- Provide mentorship to Automation Engineering team in daily operations
- Communicate proactively with multiple levels within the organization, highlighting issues and proposing solutions
- Provide technical support and issue resolution 24x7 on-call support of Automation systems on a rotational based frequency
- Apply experience and knowledge of industry best practices and tools to attain an innovative organization
- Doctorate degree OR
- Master’s degree and 3 years of Engineering experience OR
- Bachelor’s degree and 5 years of Engineering experience OR
- Associate’s degree and 10 years of Engineering experience OR
- High school diploma / GED and 12 years of Engineering experience
- Bachelor’s Degree or Master’s Degree in Chemical or Electrical Engineering or related technical field
- 5+ years’ experience in Process Automation Engineering in a manufacturing support environment with at least 3 years’ experience in the Pharmaceutical or Biotechnology industries
- 5+ years combined experience with the following product platforms: Emerson DeltaV DCS systems
- Programming expertise with SCADA, PLC, HMI, and wed based applications
- Familiarity with industry standards for batch control systems, software development life cycle methodologies, S88, 21 CFR Part 11, Validation, and GAMP
- Strong control system automation background. Design, installation, programming and validation of automated processes
- Experience with Mammalian Cell Culture, Protein Purification, Clean Utilities, CIP, SIP, Production Services and non-GMP Utilities preferred
40
Process Automation Engineer Resume Examples & Samples
- Bachelor’s degree (or equivalent experience) in an engineering/computer related field, such as, Electrical Engineering or Computer Engineering
- Extensive experience in programing PLCs
- Strong troubleshooting skills are necessary
- Demonstrated skills in organization, prioritization, time-management, and decision-making
- Good oral & written communication skills
- Self-motivated and demonstrated ability to learn new skills/technologies readily
- Five years experience and a bachelor’s degree in an engineering/computer related field, such as, Electrical Engineering or Computer Engineering
- Familiarity with VMS, FORTRAN, C
- Experience with Siemens S5 / S7, I/O and drive systems
- Experience with iFix32 HMI Software
- Experience with IBA analyzer and data acquisition systems
41
Process Automation Engineer Resume Examples & Samples
- Manage and execute instrumentation, process control and automation projects - focusing on project definition, detailed design, verification, construction and start up activities. Work closely with other disciplines such as process engineering, manufacturing, operations, maintenance, etc for executing projects
- Lead activities involving system design, configuration, testing, cutover, and start-up. Ensure compliance with local, regulatory, corporate and business standards for system hardware and software
- Develop and work with Process Control Strategy Documents (PCSD). Ensure that PCSD are updated when changes are made to the equipment. Ensure that sufficient code descriptions are included with the PLC code to document the intended control strategy
- Train and mentor Engineers, Plant Process Control Coordinator and Maintenance Technicians who have process control / automation responsibilities
- Engage our alliance partners and contracted engineering companies for instrumentation and process control /automation activities as needed to supplement business resources to meet business expectations. Manage their project performance, and monitor the quality of their engineering and maintenance services
- Improve health of site process automation systems in conformance with business and Dow Corporate requirements. Follow appropriate management of change for the site maintenance and project activities of Process Control Systems and Process Information
- Support advanced Process Control activities at the plant such as programming changes to improve asset capability or product yield and troubleshooting control system issues
- Participate in machine risk assessment and gap closure activities, provide direction related to industry standards on safe guarding
- A Bachelor’s degree is required
- Minimum of at least 3 years of experience in process control, design, programming and automation of a 24/7 manufacturing operation
- Experience with verifying field wiring, instrument checkout, motors, electrical systems maintenance, PID tuning, commissioning of PLCs, networks, drives and evaluating equipment performance
- Domestic and international travel may be required (in the range of 25%-35% during start up periods) in support of business automation needs
- On/off shift support will be needed for startup support
- Electrical Engineering, Chemical Engineering, Industrial Automation, or Process Control degree
- A preference of 8 - 10 years of experience in process control, design, programming and automation of a 24/7 manufacturing operation
- In-depth knowledge of and experience with programming languages (i.e.Allen Bradley ControlLogix, SLC, MicroLogix, PLC-5 & HMI programming languages and technologies)
- Experience in Allen Bradley FactoryTalk suite of products (RSLogix 5000, RSLogix 500, RSLogix 5, RSLinx, FT Directory, FTView)
- Knowledge in other programming languages such as Visual Studio .NET, SQL Server databases
- Experience with machine risk assessment process and industry standards on machine safe guarding
- Networking technologies such as Ethernet and DeviceNet
- Ability to understand electrical diagrams
- Experience with servo and VFD drives
- Experience in batch technology
42
L Process Automation Engineer Resume Examples & Samples
- Develop the Adoption plan for Automation solutions whilst working closely with Automation team on their roadmap and Operations teams to meet the expectations of stakeholders
- Work with Operations team to ensure the requirements are fed to Automation roadmap and implemented in line with stakeholder’s expectations
- Understand and create operations workflow with integration to Network Environment (Management tools, Other systems)
- Ensure that Automation Solutions are well tested, understood by internal Core Networks staff and the feedback provided back to Automation team
- To support the launch of Automation Solutions, Automation Adoption Engineer will work with Automation team to prepare user guides, sessions for users as well as training material in “License to Operate” tool
- Develop the Self-Service portal that provides users with information about Automation solutions and user guides how to use it
- Track the usage of Automation Solutions and identify improvement areas how these solutions could be used in the better way
- Be the key contact between the Automation team and Operations / Users to ensure all parties are up to date and the expectations are met
- Be accountable for Communication about launched new Automation solutions for internal and external staff
- Provide Advice and Guidance for users of Automation solutions as well as Training session if required
- Develop and get sign off for the Support Model for any launched Automation solutions in Core Networks
- Provide regular reporting on progress and blockers to the key stakeholders on different Automation solutions and also Service Assurance Leadership Team
- Effectively manage relationships with technical and non-technical teams, using influencing skills to ensure understanding of Automation solutions by both Core Networks and also teams outside of your direct sphere of influence
- Clear and concise communication skills are essential, both verbally and in writing, to portray a friendly but professional image to stakeholders at all levels of the organisation, with the ability to communicate difficult or complex ideas clearly, tailored to the audience; understands the challenges of communications across cultures
- Able to deliver unwelcome messages arising from objective analysis of business data, honestly, assertively and constructively
- Able to think unconventionally and find solutions to unstructured complex or technical problems, performing root cause analysis and developing creative and cost-effective solutions
- Able to work with different teams to find solution to complex issues occurring whilst developing automation solutions
- Good knowledge of Network Monitoring and Management tools, LAN/WAN Protocols & Technologies, routing & bridging protocols and Firewall platforms, Network Function virtualisation
- Experience driving and tracking multiple projects / initiatives and keeping stakeholders updated about the progress
- Experience preparing communication plan, user guides, support model documentation and training sessions for end users
- Good presentation skills are essential for role holder
- Good business analytic skills ability to understand software development framework
- Outstanding communication skills are essential for the role holder to be successful
- Broad understanding of Infrastructure Services strategy and business direction
- Understanding IT Risk and Security practices, ideally within the Financial Services sector
- Ability to plan and execute own work to time, cost and quality targets, exhibiting thorough familiarity with available processes, procedures, tools, equipment and standards associated with the role
- Able to demonstrate initiative to keep own skills up to date
- Have a history of thriving in an unstructured, ambiguous environment; adept at varying own styles of management
- Experience of working successfully in a complex IT environment in major organisations
- Good working knowledge of Microsoft Office tools (Email, Word, Visio, Excel)
