Power Supply Resume Samples
4.8
(120 votes) for
Power Supply Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the power supply job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
AR
A Renner
Annamarie
Renner
671 Rodger Greens
Chicago
IL
+1 (555) 230 9951
671 Rodger Greens
Chicago
IL
Phone
p
+1 (555) 230 9951
Experience
Experience
Houston, TX
Power Supply Engineer
Houston, TX
McCullough-Vandervort
Houston, TX
Power Supply Engineer
- Create wiring plans specs for installation teams using custom made excel
- Develop and verification for High Quality Products
- Drive Continuous Improvements of Power Supply design technology
- Responsible and professional team work
- Provide the As-built documentation and drawings
- Provide electrical drawings, technical specifications, functional specifications and bill of quantities,
- Perform Trouble Shooting during higher level system integration
Phoenix, AZ
Power Supply Design Engineer
Phoenix, AZ
Marquardt-Erdman
Phoenix, AZ
Power Supply Design Engineer
- Learn and integrate Design For Six Sigma tools and approaches, engineering simulation & modeling software, and phase-gate development processes for power supply design and development activities
- Give assistance to PS design engineering team for the development of system and infrastructure projects, promoting improvement process and guaranteeing the team development. Support implementation of DFQ, 8D/QRQC, REX, Innovation, etc
- Administer Electrical Engineering principles to identify and understand issues, and to generate design solutions for various product development challenges associated with power supplies
- Perform detailed technical analyses and create test and analysis reports
- Develop EMI and grounding strategies, analog module development, and system integration
- Audit NLAM projects during execution phase for power supply design, installation, testing and commissioning, and ensure task force missions on projects to tackle technical, quality o resource issues
- All phases of the product development cycle including concept definition, prototyping, schematic capture, circuit layout, verification, transition to production, and legacy support
present
San Francisco, CA
Project Power Supply Engineering Manager
San Francisco, CA
Willms-O'Keefe
present
San Francisco, CA
Project Power Supply Engineering Manager
present
- To be responsible for Managing the design teams and applying relevant HR cycle processes (definition of objectives, development plans …)
- Organize and track project design management (schedules, budgets, quality)
- Manage subcontractor design teams
- To manage ON-Shore and OFF-Shore Design teams of the Project
- To be responsible for the checking, coordination, approval and follow up of the Power Supply Engineering works in all design stages such as Concept, Preliminary, Detailed and As-Built of the Project. In particular manage and coordinate POS engineering teams mobilized for the Project in all project locations
- To be responsible for reviewing and checking of the produced documents by design teams and sub-contractors (if any) including ,and not limited to, Power Supply drawings, calculations (voltage drop, short circuit,...), reports (calculation notes, ...) and bill of quantities in all design stages and verifies them before delivery
- Coordinate the Change management and consolidate the impacts assessment related to the Project Engineering Management activities
Education
Education
Bachelor’s Degree in Electrical Engineering
Bachelor’s Degree in Electrical Engineering
Strayer University
Bachelor’s Degree in Electrical Engineering
Skills
Skills
- Knowledge of basic test equipment
- Working knowledge of schematic entry and board layout such as Mentor Graphics DxDesigner and Mentor Graphics PADS
- Excellent problem solving skills
- Working knowledge of Mil-Std-461
- Capable of working independently in a lab environment
- Experience performing design trade studies comparing functionality, quality, and cost
- Excellent written and verbal communication skills
- Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment
- Excellent testing and troubleshooting skills
- Proficient with Microsoft Office products
15 Power Supply resume templates
Read our complete resume writing guides
1
Power Supply Validation Engineer Resume Examples & Samples
- Strong knowledge of SW validation theory
- Capable of triage and debug system level issues related to the power component
- Good system architecture and design skills
- Proven knowledge of PC hardware (H/W) architecture to the functional level
- Good communication and/or presentation skills
- Fluent in written and spoken English. (90%-100% range)
- Understanding of Intel Architecture is a high plus
2
Advanced Product Development Power Supply Engineer Resume Examples & Samples
- Bachelors or higher in electrical Engineering or technical discipline related to Power Supply
- 3 Plus years of relevant work experience
- 2 years’ work experience using Systems Engineering Discipline
- Strong Knowledge of CAN protocols and 2 years’ experience using CAN tools
3
Autonomous Vehicle Power Supply Engineer Resume Examples & Samples
- BSEE
- Familiarity with powertrain and/or body module software design /calibration
- Experience with automotive power supply systems
- MSEE
- Electrical system experience preferred
- Experience with CAE model development for both software and physical properties. Modeling skills preferred include MATLAB, Simulink, etc
4
Research Summer Intern On-silicon Power Supply Design Resume Examples & Samples
- Chip design and tapeout-1 year
- Power converter design-6 months
- Magnetic modeling-6 months
5
Power Supply Engineer Resume Examples & Samples
- Power supply hardware design for dedicated hardware unit, such as radio unit
- Drive Continuous Improvements of Power Supply design technology
- Good English reading and writing and fairly good oral English
- Responsible and professional team work
- Experience of power design of electronic devices
- Skilled in using Cadence for schematics and layouts
6
Power Supply Design Engineer Resume Examples & Samples
- Develop and verification for High Quality Products
- Perform Trouble Shooting during higher level system integration
- Minimum bachelor degree in a technical discipline or the equivalent level of knowledge with >=3 years experiences
- Good communication skill
- Good understanding of tele-communication
- Proven experience on DC/DC Converters design is mandatory
- Proven experience on EMC design and verifications
- Experience with mass production product are highly preferred
- Experience with tele-communication radio unit hardware design is highly preferred*LI-POST
7
Electrical Power Supply Engineer Resume Examples & Samples
- Lead the design and development of new power supply technologies for improvements in performance and efficiency. Products include alternators / generators, starters, batteries and voltage/power converters
- Lead the development of component specifications, failure mode avoidance disciplines and core design validation
- Ensure the technologies being developed will meet the needs of the program objectives in terms of value, quality and performance
- Interface with suppliers and application engineers to ensure flawless implementation on lead and follow-on vehicle applications
- Develop and maintain project work plans
- Lead project design reviews with suppliers
- Good communication skills, including verbal and technical writing
- Bachelor of Science in Electrical or Mechanical Engineering
- 5+ years of experience in design and release of electrical / electronic components
- 2+ years of experience in developing and writing laboratory and vehicle test specifications
- Master of Science in Electrical or Mechanical Engineering
- D&R of electrical / electronic components – preferably rotating electrical machines experience
- Product manufacturing and quality control experience
- Conducting laboratory and vehicle tests experience
8
Senior Power Supply Engineer Resume Examples & Samples
- B.S. in Electrical Engineering
- Must have at least 12 years experience in Power Supply design technologies
- Proficient with PSPICE or LTSpice simulation tool
- Experienced with the Microsoft Office products suite including Excel, Word, Project, PowerPoint, and Outlook
- Solid troubleshooting skills
- Extensive knowledge in electronic design to perform all design tasks and provide analytical predictions of the results
- Space level worst case analysis
- Goal planning and team player skills
- Ability to recognize problems or barriers and drive solutions
- Individual needs to be a self-starter, organized and punctual
- Must be highly motivated to drive improvements in a challenging environment
- A Masters Degree is highly desired
9
Power Supply Traction Design Lead Engineer Resume Examples & Samples
- Perform the power supply (for Power Traction parts) basic and detailed engineering activities of a project
- 10 -15 years of experience in Electrical/Traction Power design, construction of engineering projects, and electrified rail transit systems especially DC system
- Good knowledge of electrical installations dedicated to traction power.Good knowledge of NFPA and EN norms related to Railways infrastructure
- Good knowledge of traction power DC High and Low Voltage systems including relaying, rectifier, distribution and SCADA equipment
- Good Knowledge of AutoCAD and REVIT MEP is preferable
- Fluent English. French and/or Arabic will be an asset
10
Power Supply Installation Manager Resume Examples & Samples
- The Line Installation Manager (based on site) reports directly to the Power Supply Project Installation Manager and is in charge of making sure that the relevant equipments are installed in conformity with the Basic and Detail Designs, the installation procedures, the QA/QC system and the Time Schedule in place and cost
- He will implement on site the required organisation to ascertain that the Installation works are performed in the best conditions of safety and reliability. In compliance with EHS plan, project requirements and client safety rules
- His duties include also the necessity to co-ordinate on all technical aspects with the Engineering Manager and his team of Detail Design and with the procurement teams based in the different project locations (Bill of Quantity)
- The Line Installation Manager is required to participate on the preparation of the Time Schedule and has the responsibility for running it and reporting to the Power Supply Project Installation Manager
- To implement his task, the Line Installation Manager is responsible for defining the necessary resources (human and material). If necessary, the Line Installation Manager will participate in the elaboration of Subcontractor’s RFQ (Request for Quotation), in the assessment of the proposals and the choice of the Subcontractors
- The Line Installation Manager will manage and control the Subcontractors performance as per their Subcontracts obligations
- His duties include also to co-ordinate with the various Civil Contractors and other third parties on Site
- Validated experience in electrical power system distribution Installation Management
- Leadership, initiative and decision minded
- Good knowledge of the traction and auxiliary energy distribution system, in terms of installation.(Traction and auxiliary electrical power substations)
- Knowledge of downstream activities, ventilation, passenger stations utilities will be an advantage
- Good understanding of electrical power system distribution design, testing and commissioning
11
Power Supply Construction Manager Resume Examples & Samples
- The Construction Manager (based on site) reports directly to the Power Supply Project Manager and is in charge of making sure that the relevant equipments are installed in conformity with the Basic and Detail Designs, the installation procedures, the QA/QC system and the Time Schedule in place and cost
- He will implement on site the required organisation to ascertain that the construction works are performed in the best conditions of safety and reliability. In compliance with EHS plan, project requirements and client safety rules
- The Construction Manager is responsible for the management of installation contractors. He shall manage installation sub-contracts in the best interest of the project
- His duties include also the necessity to co-ordinate on all technical aspects with the Engineering Manager and his team of Detail Design and with the procurement teams based in the different project locations
- The Construction Manager is required to participate on the preparation of the Time Schedule and has the responsibility for running it and reporting to the power supply Project Manager
- To implement his task, the Construction Manager is responsible for defining the necessary resources (human and material)
- During the installation, the Construction Manager is required to organise the tasks, in a competent and consistent way, so that all key activities are properly controlled
- The Construction Manager will manage and control the Subcontractors performance as per their Subcontracts obligations
- Validated experience in electrical power system distribution construction Management
- Mobility
12
Power Supply Mv-lv Design Lead Engineer Resume Examples & Samples
- Perform the power supply (for medium voltage / low voltage parts) basic and detailed engineering activities of a project
- Provide, review and validate electrical drawings, technical specifications, functional specifications and interface specifications, bill of quantities
- Provide, review and validate calculation notes (voltage drop, short circuit, DC, etc)
- Ensure the technical validation of the supplier’s equipment offers
- Follow-up and validation of the technical drawings from the equipment supplier
- Provide the factory test procedures of the equipment
- Participate at the factory acceptance tests of the equipment
- Assist the “Power Supply Engineering Manager” for coordination / interfaces
- The power supply engineering team including and not limited to automation and installation teams
- The others sub-systems of the project, particularly: Systems, civil works, SCADA, return current, EMC, earthing & bonding, etc.
- Provide technical support to Construction and Test and Commissioning teams with regards to design issues
- Bachelor degree, preferably master’s degree in Electrical
- Engineering10 -15 years of experience in electrical engineering
- Professional experience in railway transportation is preferable
- Good knowledge of electrical installations (medium voltage and low voltage),
- Experience in necessary technical software such as CANECO, SKM, ETAP, CYME, etc
- No restriction to travel within or out of Middle East and Africa Region
13
Power Supply BIM Designer Resume Examples & Samples
- Graduated from related departments;Electrical background will be asset
- At least 5 years of experience in the field of CAD/BIM design
- Good experience in Electrical design will be an asset
- Knowledge of Railways systems will be an asset
- Very good knowledge of the software AutoCAD by Autodesk (layers,x-refs, blocks, etc…)and one of BIM platform such as REVIT
- Experience in interfaces with other systems, especially with civil work
- No restriction to travel within or out of Middle East and Africa
14
Catenary & Power Supply Maintenance Technician Resume Examples & Samples
- Perform visual inspections of the catenary along the line and in the tunnel according to maintenance procedures
- Perform Electrical substations and electrical installations regular inspections
- Inspect active fire safety equipment inside the tunnel
- Perform equipment exchange or repair or supervise reparation
- Record all defects and repairs and report inside maintenance management computerised tools Put in service Alstom automated catenary inspection tools
- Perform Power Supply Lock Out Tag Out when required as per safety procedures
- Be part of the emergency rescue team in case of emergency on the line
- May from time to time perform other duties as required by the maintenance of the LRT system
- Follow all safety procedures and utilize safety equipment as required. Safety first !
- Actively participate in the ALSTOM process for reduction of deviations from standard for Health & Safety
- Coach and develop as a mentor other staff where applicable
- Read reports/manuals, and participate in training programs
- Adopt the Ways of Working (WOW) Behaviours in the day to day working, as per ALSTOM Guidelines
- Work in shifts in reduced teams, at day or at night, and sometimes on call
- Vocational Studies Diploma in Electrical with experience or equivalent
- College degree in Electrical or Electromechanical or equivalent
- Experience in high voltage safety related environment is desirable. Experience in railway an asset
- English is mandatory. French is a plus
15
Project Power Supply Engineering Manager Resume Examples & Samples
- To be responsible for the checking, coordination, approval and follow up of the Power Supply Engineering works in all design stages such as Concept, Preliminary, Detailed and As-Built of the Project. In particular manage and coordinate POS engineering teams mobilized for the Project in all project locations
- To be responsible for hiring any future resource for the effective delivery of the POS engineering deliverables and in the development of the technical skills of the team
- To be responsible for Managing the design teams and applying relevant HR cycle processes (definition of objectives, development plans …)
- To be responsible for reaching the Quality and targets for the Project
- To be also responsible for the application of the Design For Quality policy and of the various Engineering quality process,
- To be responsible for reviewing and checking of the produced documents by design teams and sub-contractors (if any) including ,and not limited to, Power Supply drawings, calculations (voltage drop, short circuit,...), reports (calculation notes, ...) and bill of quantities in all design stages and verifies them before delivery
- Manage Design Changes related to the Power Supply throughout the project cycle
- Coordinate the Change management and consolidate the impacts assessment related to the Project Engineering Management activities
- Ensure proper preparation and execution of all necessary Design Reviews, including DFQ ones
- Deliver a weekly report of the Power Supply Engineering progress participating in preparation of the monthly Power Supply Engineering Report MPR as requested by the Sub-System Manager
- To be able to direct the developing of Power Supply installation drawings and coordinate them with civil works and other sub-systems
- To apply the revisions, norms and standard applications on technical drawings
- To be able to providing technical support to installation and sourcing teams, when necessary
- Prepare and update of budget for Power Supply according to design process and technical details
- To take part in the test and commissioning process related to the activities under his/her scope
- To manage ON-Shore and OFF-Shore Design teams of the Project
- Lead and boost design teams
- Manage subcontractor design teams
- Organize and track project design management (schedules, budgets, quality)
- Communicate with internal and external entities
- Implement the Expolink Consortium policies, processes, procedures and instructions
- More than 15 years’ experience in technical managerial positions in international Metro projects
- Experienced in the leadership of large multinational teams in turnkey projects
- Good stakeholder management and interpersonal skills
- Knowledge and Experience of Underground Railways systems are strength
- Must show capacity to develop with the team, the Power Supply basic and detailed designs as well as the As-Built documentation
16
Power Supply & Transmission Distribution Planner Resume Examples & Samples
- Delivers or contributes to the development of work products throughout at least one phase of an engagement
- Co-facilitates group discussions with team members or client representatives
- Uses recognized methods to deliver work products
- Contributes to risk and issue identification and synthesis of solutions
- Delivers work products and demonstrates a broad knowledge of an industry
- Collects and analyzes information specific to the industry to recommend alternatives
- Proactively develops additional knowledge applicable to the area of expertise
- Ability to do an IRP for Transmission
- Resources planning experience
- Well versed in transmission and generation
- Ability to model in PROMOD and Plexos
- Knowledge of electricity markets(PJM, MISO, Northesat, ERCOT, etc.)
- Candidates who have taken a class with modeling in PROMOD or Plexos would qualify
17
Power Supply Design Engineer Resume Examples & Samples
- Electrical design tasks including requirements analysis, specification generation, interface definition, component selection, circuit simulation, schematic capture, and board layout for low-voltage of switching power supply solutions
- Develop solutions utilizing Power Factor Correction, Forward, Boost, Buck, and SEPIC topologies with output power ranges of 10W -150W
- Design and specify magnetic components
- Engage in all phases of product development, including concept, architecture, design, and test
- Schedule, cost, and technical responsibility at the board or subsystem level
- Electrical design synthesis at the board or subsystem level
- Simulate, Breadboard, Test and Troubleshoot analog and power conversion circuits and subsystems
- Develop test plans and procedures for electrical power subsystems
- Perform test and evaluation of Electrical boards and systems
- Review and develop technical specifications
- Design power supply assemblies for specification compliance
- Verify that designs meet or exceed all requirements and specifications
- Perform detailed technical analyses and create test and analysis reports
- Develop technical solutions to known production, reliability, or performance problems
- Generate design documentation to ensure the delivery of a quality finished product
- Facilitate design reviews with key stake holders, including Design Engineering, Production and Manufacturing
- Participate in interdisciplinary design teams and reviews
- Learn and follow company processes for product development, configuration management, purchasing, etc
- Direct less experienced engineers as part of a design team
- A minimum of 4 - 7 years engineering experience in analog or power electronics design
- Board level design, development and/or testing experience with power distribution and converter systems
- Working knowledge in the selection of switching power supply components: FET Switches, Inductors, Capacitors
- Working knowledge of circuit simulation tools such as SPICE
- Product design experience with repetitive production applications
- Must be able to perform detailed analysis
- Experience performing design trade studies comparing functionality, quality, and cost
- Knowledge of basic test equipment
- Working knowledge of Mil-Std-461
- Capable of working independently in a lab environment
- Working knowledge of schematic entry and board layout such as Mentor Graphics DxDesigner and Mentor Graphics PADS
- Familiarity with Configuration Control processes
- Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment
- Outstanding work ethic and commitment to organizational success
- Proficient with Microsoft Office products
- Excellent communication skills (written, verbal, & presentation)
- Matlab or other programming language
- Advanced Engineering Degree
- Experience in the design of electronics for defense or avionics applications
18
Power Supply Design Engineer Resume Examples & Samples
- Generate reliable, cost effective, manufacturable power supply design solutions that meet or exceed the needs of customer applications as well as comply with all applicable governing regulatory standards (UL, CE, ISO, etc.) and Mil standards
- Administer Electrical Engineering principles to identify and understand issues, and to generate design solutions for various product development challenges associated with power supplies
- Learn and integrate Design For Six Sigma tools and approaches, engineering simulation & modeling software, and phase-gate development processes for power supply design and development activities
- Interfaces with manufacturing and quality assurance personnel in establishing quality requirements, design for manufacturing and test for power supply products
- Aid in generating technical papers, technical articles, patent disclosures, and technical discussions under the guidance of more experienced engineers
- Participate in the development of production tooling and assembly fixtures to enable error-proof and cost effective production of power supplies
- Achieve familiarity with the products of the corporation common to activity and study the engineering and products of competitors
- Must be proficient on DC/DC conversion, AC/DC front ends, DC/AC, control theory and loop compensation, magnetic design, EM, filter design, schematic capture and PCB layout
- Bachelor’s degree in Electrical or Electronics Engineering from an accredited college or university
- Minimum of 3 years’ experience in power conversion product design and development
- Experience in PCAD and Altium is required
- Relocation is not offered for this role. Candidates must reside within a 50 mile radius of the Torrance, CA facility
- Sponsorship is not offered for this role. Candidate must be legally authorized to work in the United States on an ongoing basis without company sponsorship
- MSEE is a plus
- A Good working knowledge and proficiency in computer simulation and modeling software (stress, thermal, circuit analysis, etc.)
- Experience with high density and high power design technology and spice based simulation tools
- Background in UL compliance requirements and Mil Stds are preferred
- Background and experience in control loop , magnetics design, EMI and safety rules and regulations
- Project management knowledge and experience is a plus
- Experience and familiarity with various Power Conversion topologies especially high power density topologies
- As subject matter expert for DC/D , DC/AC and AC/DC Power Supplies design and development
- Knowledge of planar magnetics and PCB layout of critical voltage and current loops are preferred
- Individual must be capable of writing technical documents such as UL procedures, test reports, and patent disclosures
- Must be team oriented, with excellent interpersonal skills and effective communication
19
Power Supply Installation Design Engineer Resume Examples & Samples
- Prepare installation drawings including equipment layout, cables/feeders routing, cable trays/cable ladder sizing, cable duct banks, spider diagrams, cable lists, Bill of Quantities, etc
- Prepare the civil opening/penetration
- Prepare all the installation mounting standards
- Prepare all the earthing system mounting standards
- Prepare all the lugs/terminals type and sizes
- Prepare the civil works drawings compared to the installation guidelines drawings,
- To participate in all the interfaces documents related to power supply equipment installation
- Review the supplier’s equipment from installation point of view
20
Power Supply Installation Design Lead Engineer Resume Examples & Samples
- Perform the power supply (for medium voltage, low voltage and traction parts) basic and detailed installation design works which include and not limited to
- Bachelor degree, preferably master’s degree in Electrical Engineering
- Professional experience in railway transportation is preferable,
- Good knowledge of international codes and standards
- Good knowledge of EMC rules and standards
- Good Knowledge of AutoCAD and REVIT MEP
- Fluent English, French and/or Arabic will be an asset
21
Power Supply Control & Command Engineer Resume Examples & Samples
- Bachelor degree, preferably master’s degree in Electrical/Electronic Engineering,
- 3-5 years with good experience in power/substation automation, PLC, SCADA and software
- Good Knowledge of Communication protocols MODBUS
- Good Knowledge of Railways systems will be appreciated
- Good knowledge and understanding for the electrical drawings such as Single line diagrams, equipment layouts, etc
- Good in writing procedures, specification and technical documents
22
Power Supply Design Engineer Resume Examples & Samples
- Experience with the design of electrical power systems
- Experience with creation of electrical wiring and schematic drawings
- Experience with power and signal cabling and installation
- Ability to work in a manufacturing and laboratory environment
- Excellent testing and troubleshooting skills
- Experience with MS Office suite
23
Power Supply Requirements & Configuration Engineer Resume Examples & Samples
- Establish and maintain Project POS Requirements and configuration Management Plan
- Establish and Maintain a POS Requirements and configuration Management System
- Manage technical requirements (product and operational requirements)
- Manage POS Project requirements (covered by project plan)
- Monitor and control the Requirements and configuration Management Process
- Work with the customer and partners to collect, characterize, and allocate requirements to the partners, System, and subsystems
- Evaluate gap between the Client requirements and solution proposed by the POS subsystems
- Ensure understanding that all POS requirements have been properly understood and verified with the client and other stakeholders
- Create requirements baseline
- Manage configuration related to POS and ensure proper change management for POS verified and allocated requirements
- Ensure that proper validation and verification of each POS requirement is agreed with the client and the engineer in charge
- Define Configuration items, its structure, and baseline related to POS
- Control Changes to configuration items throughout the project lifecycle related to POS
- Create, analyse, plan, and track POS change requests with partners and client
- Working Knowledge of railway systems, operating requirements, available equipment and systems
24
Power Supply Engineer Resume Examples & Samples
- LI-MM1
- BSEE degree in electrical engineering, MSEE preferred, plus 7+ years additional relevant experience
- Required skills include power conversion design and analysis, circuit simulation, control loops and stabilization
- Must be able to specify core, wire size, inductance, current, etc. in a magnetics design
- Familiarity with CAD tools for schematic entry and layout
- Proven track record of power supply designs for military applications that are currently in production
- Proficient with MS Word, Excel and Project software
- Familiarity with IntuSoft and/or Simplis is a plus
- Must be able to obtain and maintain a security clearance
- Excellent communications skills both oral and written to expeditiously coordinate efforts through all phases of the manufacturing and engineering process while contributing in a high performance team environment to meet customer needs
- Must be willing to work overtime and weekends when required
25
Power Supply QA / QC Lead Engineer Resume Examples & Samples
- Review/develops Inspection and Test Plans and relevant QC forms to be implemented on-site or off-site
- Supervise TSY Quality Control Inspectors
- Support TSY Material Engineer in terms of inspecting on-site incoming materials as needed
- Ensure that TSY Quality Inspectors under his supervision is working with the latest Method Statements, ITPs and Construction Drawings
- Perform Site QC inspections in accordance with approved Inspection and Test Plans/Procedures
- Check the works in their area of responsibility for compliance with the specification and drawings
- Accept/rejects the completed works offered for inspection by TSY Construction Team
- Prepare Inspection Request to be submitted to RAMPED in coordination with TSY Construction Team
- Prepares and report Quality Control Reports to TSY Project Quality Manager
- Focal point of TSY Construction Team and RAMPED Site Lead Inspectors
- Monitor and reports status of QC inspections to TSY Project Quality Manager
- Issue nonconformity report when a noncompliance is identified
- More than 7 years’ experience in the construction industry
- At least 3 years in rail construction projects
- Understand the requirements of drawings and specifications
- Working knowledge on MS Office applications
- Effective communication and reporting skills
- Demonstrate leadership capabilities
- Able to provide technical advice to TSY Construction Team during QC inspection activities
- Demonstrate capability to work under extreme pressure and pro-activeness
- Attention to details and good record keeper
- Demonstrate capability maintaining a good working relationship with TSY Construction Team and RAMPED Lead Inspectors
26
Power Supply Circuit Designer Resume Examples & Samples
- Designing, testing and integrating products
- Analyzing customer and system requirements to develop detailed analog and power circuit designs
- Validating designs through various methods of reviewing, testing and analysis
- Identifying, tracking and statusing of technical performance measures to measure progress and ensure compliance with requirements
- Providing engineering support throughout the lifecycle of the product
- Investigating emerging technologies to develop concepts for future product designs to meet projected requirements
- 3+ years of experience in analog circuit design. (ie: Op amp circuits, comparators, bus drivers, switching power supply components, linear regulators)
- Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard
- 3+ years of experience designing or fabricating hardware in a lab environment including using test equipment. (ie: Oscilloscopes, Network Analyzers, Multimeters)
- 3+ years of cumulative experience in power supply electronics design such as buck/boost, flyback, DC-DC, etc
- 2+ years with Op-amp and Transistor theory
- 2+ years Circuit analysis tools for example Cadence PSpice, LTSpice
- Electrical Engineering undergraduate degree
- Printed Wiring Board layout and routing concepts for low noise and signal integrity, for versus signal types such as: high current vs small signal lower current traces, power and ground planes, controlled impedance, etc
- Control loop analysis/operation theory
- Performing worst case, FMEA, EMI/EMC, and stress analyses
- Matlab, Mathcad, and/or LabView
- Mil-PRFs, and Mil-Stds 461, 704, DO-160
27
Engineer, Power Supply Resume Examples & Samples
- BSc or MSc in Electrical Engineering
- Good understanding of analog power electronics design
- Understanding of testing principles, techniques and test equipment required for power supply design verification
28
Specialist, Power Supply Resume Examples & Samples
- Thorough understanding of analog power electronics design
- Basic understanding of digital electronics and HW related SW
- Understanding of testing principles, techniques and test equipment required for power supply verification
- Personal Attributes: Good verbal and written communications skills. Adept Problem Solver. Excellent team working skills
29
Power Supply Design Engineer Resume Examples & Samples
- Ensure a deep and specialized technical training of the power supply NLAM engineers and technicians, through a dedicated “Engineering School”
- Give assistance to PS design engineering team for the development of system and infrastructure projects, promoting improvement process and guaranteeing the team development. Support implementation of DFQ, 8D/QRQC, REX, Innovation, etc
- Support the relationship with Central Engineering for power supply, in particular to ensure reference library customization and adaptions to local standards
- Audit NLAM projects during execution phase for power supply design, installation, testing and commissioning, and ensure task force missions on projects to tackle technical, quality o resource issues
- Support Sourcing and Quality for the technical audits and follow-up of local providers part of the localization strategy. In particular support projects in the phase of procurement by attending or supporting preparation of critical FATs and resolution of critical NCRs
- Contribute to power supply hub workload for tenders and projects whenever possible and necessary, both for Engineering and Field Operations
- Graduated in electrical systems,
- A minimum of 15 years of experience in electrical engineering,
- Professional experience with railways transportation,
- Very good knowledge of electrical installation,
- Fluent Spanish, English
30
Power Supply Substation Construction Supervisor Resume Examples & Samples
- Ensuring that TPS / LPS installations comply with the documents and that quality requirements and deadlines are met
- Managing TPS / LPS construction team and/or TPS / LPS Subcontractor on site
- Supervising works
- Ensuring that works meet the requirements of the construction documents
- Collecting , checking and signing of related TPS / LPS installation Quality Records
- Organising the team under his authority
- Collecting and signing daily reports relating to his activity and forwarding them to the POS Line Installation Manager
31
Power Supply Installation Supervisor Resume Examples & Samples
- Ensuring that HV & LV Cables installations comply with the documents and that quality requirements and deadlines are met
- Drafting the methods and procedures related to the HV & LV Cables installation
- To define the needed resources (teams and equipments)
- Analyse interfaces constraints (other activities in tunnel and viaduct as civil works track works..)
- Participate to the elaboration of the general works schedules(TRIP)
- Managing general weekly and daily schedules
- Managing HV & LV Cables construction team and/or HV & LV Cables Subcontractor on site
- Make sure that documents and drawings revision delivered to his team for site construction activities are “for execution” status
- Ensuring that installation procedures are followed
- Collecting , checking and signing of related HV & LV Cables Installation Quality Records
- Collecting and signing all teams daily reports
- Ensuring that safety rules are followed
- Collecting and signing daily reports relating to his activity and forwarding them to the Power supply Site Engineer
- Reporting to the Power supply Site Engineer on the progress of jobs with which he is concerned
32
Power Supply Noise Engineer Resume Examples & Samples
- EE/ME/CS related background in system/chip design
- Solid knowledge and industry experience in following areas
- Understanding of ASIC physical design process/tools, advanced semiconductor technology process and device physics is a plus
- Strong teamwork sense, good learning competency, self-motivated, and ability to work in diverse areas in a flexible and dynamic environment
- Direct SI/PI engineer role with industry experience
33
Power Supply Construction Manager Resume Examples & Samples
- The Construction Manager (based on site) reports directly to the power supply Project Manager and is in charge of making sure that the relevant equipments are installed in conformity with the Basic and Detail Designs, the installation procedures, the QA/QC system and the Time Schedule in place and cost
- He will implement on site the required organisation to ascertain that the construction works are performed in the best conditions of safety and reliability. In compliance with EHS plan, TGS and client safety rules
- His duties include also the necessity to co-ordinate on all technical aspects with the Engineering Manager and his team of Detail Design, and with the procurement teams based in France and in Panama
- The Construction Manager is responsible for his budget and the on site QP & EHS plans implementation
- Technical SkillsAnalysis, synthesis. Transparency
- EducationElectrical/ Construction diploma/degree
- Language skillsVery Good Level in English. French language is a plus
34
Power Supply T&C Manager Resume Examples & Samples
- Realize the tests of all the electrical subsystems (substations LAP, SEP, SET, MT, BT and Traction Cables) with the previous realization and validation by the client of the tests procedures on site
- Manage and optimize the Work Package tests and the start up in favor of the global project
- Follow up of the energy testing tools and equipment. Anticipation of needs, daily administration, calibration etc
- Participate in the selection process jointly with the Sourcing Department and make the management of T&C subcontractors to ensure compliance with the commitments of the subcontracts of the tests
- Perform the reports of the tests in time and form and obtain validation by the final customer according to the contractual processes of the project
- Perform the update of the technical documentation in “As Built” and the delivery to the designer team according to the planning of the project
- Participate in the resolution of problems using the tools of Quality: NCR, 8D, HOC, 4M etc
- Execute or supervise the operations of corrective maintenance (repairs) and internal modifications to the electrical equipment of the substations when necessary
- Tracking of spare parts until the delivery to the Maintenance team
- Realize the delivery of the systems effectively with the ILS team for training / warranty / spare parts according to the program and details to be defined with them later
- Provide all the necessary evidence for the SAFETY process
- Predict and follow the mobilization of human resources. Cost Responsibility
- Predict and follow the mobilization of the teams. Cost Responsibility
- Respect the EHS processes of the project
- Manage the delivery of electrical subsystems to Temporary Operation as well as to the final customer
- Language skills: Spanish. English: intermediate
- Previous experience: Technician with more than 5 years of experience in supervised electrical systems testing. Electrical engineer
- Expert of engineering elements (specification + electric drawings)
- Expert on techniques (normative) and tools of electrical tests (Multimeter, oscilloscope, megohmmeter)
- EHS expert working with electrical risk
- Strong knowledge about the automatic control of electrical subsystems
- Knowledge of the requirements of T & C system
35
Power Supply Engineer Resume Examples & Samples
- Define, calculate and dimension of powerbuses
- Planning of cabinet components
- Create wiring plans specs for installation teams using custom made excel
- Reading wiring diagrams
- Liaising with the leader of the design team
- Willingness to work abroad
- Team work attitude
- Positive, can-do attitude
36
power Supply Line Installation Manager Resume Examples & Samples
- During the installation, the Line Installation Manager is required to organise the tasks, in a competent and consistent way, so that all key activities are properly controlled
- Minimum 5 years, as site manager, in installation works
- Knowledge on Network Rail Contracts
- Knowledge on international Contract
- Good knowledge of the other activities, upstream to electrical power system distribution installation such as civil works and electromechanical industrial equipment’s
37
Site Supervisor Power Supply Resume Examples & Samples
- Ensuring that or Main Power Station / Traction Power Substation / Light Power Substation / Switching Rooms / High Voltage / Direct Current / Low Voltage Control Cables installations comply with the documents and that quality requirements and deadlines are met
- Managing Main Power Station / Traction Power Substation / Light Power Substation / Switching Rooms / Cables construction team and / or Main Power Station / Traction Power Substation / Light Power Substation / Switching Rooms / High Voltage/Direct Current / Low Voltage Control Cables Subcontractor on site
- Collecting , checking and signing of related Main Power Station / Traction Power Substation / Light Power Substation Switching Rooms / High Voltage / Direct Current / Low Voltage Control Cables installation Quality Records
- Collecting and signing daily reports relating to his activity and forwarding them to the Power Supply Construction Manager
- Reporting to the Power Supply Construction Manager on the progress of jobs with which he is concerned
- Weekly works progress program control and associated reports
- Client complaints follow-up (non conformity forms)
- Quality Control and Heath Safety indicators
- Electrical / Construction diploma / degree
- Minimum 5 years, as site supervisor, in installation works
- Validated experience in electrical power system distribution construction Supervision
- Good knowledge of the Main Power Station, traction and auxiliary energy distribution system, High Voltage / Direct Current / Low Voltage Control cables in terms of installation
- Good understanding of electrical power system distribution design
38
Power Supply Integrity Application Engineer Resume Examples & Samples
- Analyze, mitigate and fix power supply DC and Transient ID Drop and Electro-migration effects
- Communicate clearly and effectively on the results of the analysis and how power bus noise is being handled in ASIC products
- Perform all activities in a safe ad responsible manner and support all Environmental, Health, Safety & Security requirements and programs
- BS Electrical Engineering (MS preferred)
- More than 5 years of experience in DC and AC transient power bus noise analysis and mitigation
- Travel – less than 10%
- Language Fluency – Fluent in English
- MS in Electrical Engineering
- Physical Design knowledge using Cadence Innovus or Synopsys ICC2
- Understanding of power supply network design
- A team player able to meet commitments in a timely manner
- Excellent communication/documentation skills
- Experience with IC power delivery network design and analysis including PCB and package (SCM/MCM) environments
39
Power Supply Senior Main Power Station Design Engineer Resume Examples & Samples
- Perform the power supply (132 kV High Voltage 33kV medium voltage and low voltage ) basic and detailed installation design works for Main Power Station which include and not limited to
- 10 -15 years of experience in electrical installation design works,
- Professional experience in 132/33 kV Main Power Station is preferable,
- Good knowledge of international codes and standards, DEWA specifications and requirements,
- Good knowledge of Electromagnetic Compatibility (EMC) rules and standards
- Good Knowledge of AutoCAD
- Fluent English and/or Arabic will be an asset
- UAE Driving Licence
40
Power Supply Design Engineer Resume Examples & Samples
- Design and development of new and existing AC/DC, DC/DC and battery powered systems
- All phases of the product development cycle including concept definition, prototyping, schematic capture, circuit layout, verification, transition to production, and legacy support
- Develop EMI and grounding strategies, analog module development, and system integration
- Design and support for industry compliance testing
- Specification development and subcontractor oversight on externally produced assemblies
- Experience in hardware design in high efficiency switch mode power supply design for low to medium power radio and communications equipment
- Experience designing for extreme physical and electrical environments such as temperature extremes, vibration, EMI/EMC, humidity, power interruptions, and input voltage excursions
- The ability to obtain a US Security Clearance post hire
41
Power Supply & Distribution Coop-rail & Transit Engineering Resume Examples & Samples
- Assist senior staff with quality assurance tasks on all engineering documents
- Develop documentation to automate interdepartmental coordination
- Prepare/draft design alternatives pertaining to Overhead Catenary Systems and Traction Power Systems
- Assist team members with document issuing tasks
42
Power Supply Construction Supervisor Resume Examples & Samples
- Ensuring that his team is efficient
- Managing non-conformities relating to his activity
- Reporting to the POS Line Installation Manager on the progress of jobs with which he is concerned
43
Senior Power Supply Design SME Resume Examples & Samples
- Experience with both High Voltage AC and DC Power
- Familiarity with Signal/Power Integrity and EMI Analysis
- Familiarity with Whole Life Engineering Analysis
- Familiarity with Thermal and Structural Analysis
- Proficient with ECAD tools (Mentor Xpedition, DxDesigner)
44
Power Supply Engineer Resume Examples & Samples
- Perform the power supply (medium voltage / traction / low voltage parts) basic and detailed engineering activities of a project
- Provide electrical drawings, technical specifications, functional specifications and bill of quantities,
- Provide calculation notes (voltage drop, short circuit, cable sizing, etc),
- Ensure the technical validation of the supplier’s equipment offers,
- Prepare technical offers based on Employeer requirements and Universial standards
- Follow-up and validation of the technical drawings from the equipment supplier,
- Provide the factory test procedures of the equipment,
- Assist the “Power Supply Design Lead Engineer” for coordination / interfaces with
- The power supply engineering team including and not limited to automation and installation teams,
- The customer,
- The project management team,
- The suppliers, the subcontractors, and the partners
- Provide the As-built documentation and drawings
- A minimum of 5 to 8 years of experience in electrical engineering,
- Good knowledge of electrical installations (high voltage, medium voltage, traction and low voltage),
- Experience in necessary technical software such as CANECO, SKM, ETAP, CYME, CYMCAB, SIMUX, etc
- Good Knowledge of AutoCAD and preferable also Revit
- Autonomy, motivated, initiative, and interested in technical topics,
- Fluent English, second language appreciated
45
Senior Power Supply Engineer Resume Examples & Samples
- Perform the power supply (medium voltage / traction / low voltage parts) basic and detailed design engineering activities of a project
- Provide electrical design drawings, technical specifications, functional specifications and bill of quantities,
- In charge of the reporting of the Design performance and of providing the Return Of Experience of projects
- In charge of calculation notes (Load flow, voltage drop, short circuit, cable sizing, etc),
- Follow up and Ensure the technical validation of the supplier’s equipment offers, prepare compliance matrix,Provide the factory test procedures of the equipment,
- Assist the “Power Supply Design Engineers” for coordination / interfaces with
- The others sub-systems of the project, particularly: Systems, civil works, SCADA, Negative DC return current, EMC, earthing & bonding, etc...The project management team,
- Provide technical support to Construction and Test and Commissioning teams with regards to design issues,
- A minimum of 8 years of experience in electrical engineering,
- Professional experience for 33 kV Medium Voltage, 750 VDC, railway stray current Ralway earthing and bonding and LV Systems in railway transportation is preferable,
- Good knowledge of electrical (high voltage, medium voltage, traction and low voltage), design, installation and test and commissioning
- Experience in necessary technical softwares such as CANECO, SKM, ETAP, CYME, CYMCAB, SIMUX etc., is preferable,
46
Power Supply Interface & Industrialisation Manager Resume Examples & Samples
- Solution oriented
- Mechanical knowledge for industrialisation solutions
- Able to develop application solution for mobiles
- Software: Word, Excel, Power Point, Java, SQL, HTML
- Language : technical English
- Experience in team management
- Innovation oriented, out of box thinking
- Analytic mind-set
- Perseverance and initiative taking
- Autonomy
- Transparency
47
Senior Electronic Engineer, Power Supply Resume Examples & Samples
- BSEE degree in related technical discipline
- MSEE degree or higher preferred
- 8+ years experience in in switch-mode power electronics in the 1-100kW range
- Experience with Full and Half Bridge converters using MOSFETs or IGBT’s
- Experience with High Power, High efficiency switching power supplies using topologies such as boost, buck, forward, ZVS, ZCS, quasi-resonant and polyphase
- Experience with circuit simulation tools (e.g. SPICE, Saber, etc.)
- Ability to understand and manage tradeoffs between cost, performance and power density
- Good writing skills (specifications, test reports, engineering analyses, etc)
- Excellent organizational skills a must
48
Power Supply Engineer Resume Examples & Samples
- Design high voltage power supplies for space applications
- Design low voltage and high voltage converters
- Troubleshoot high voltage and analog circuitry
- Board and system level testing
- Setup data acquisition and collect data using laboratory instrumentation
- Perform analysis and reporting of collected data
- Preform upgrades to TVAC chambers
- Design harnesses for prototype and flight units to be used in high voltage applications
- Help with technical proposal through write up, designs and building proof of concept prototypes
- Work with a team to coordinate activities
49
Power Supply Installation Cad Operator Resume Examples & Samples
- A minimum of one-two years of experience in installation of electrical systems,
- A minimum of one-two years of experience in using 2D softwares (AutoCad, Microstation),
- Autonomy,
- Motivated, initiative, and interested in installation topics
- A minimum of one-two years of experience in team management,
50
Power Supply & Distribution Drafter Resume Examples & Samples
- Assist engineers/designers with drafting and preparation of contract packages
- Draft and prepare electrical layout plans, schematics and details working from sketches or notes
- Review rough sketches, drawings, specifications, and other engineering data and provide technical support as required
- Communicate with external agencies (i.e. utilities)
- Produce drawings using Micro Station V8i and AutoCAD
- Knowledge of lighting design software an asset
- Advise SNC-Lavalin representatives and contractors on the interpretation of drawings and specifications and advise on additional details or clarifications required for project design
- 5 – 8 years of experience with good CAD skills in Microstation and Autocad
- Revit experience in asset
- At least 3-5 years of experience in EPC\Projects based experience
- Electrical Engineering\Designer background as a CET a must have
- Willingness to carry out job site electrical system inspections also an asset
- Experience working on tight deadlines
- Experience in electrical power systems, overhead catenary systems an asset
51
Power Supply Sub-system Project Manager Resume Examples & Samples
- Efficient
- Team work oriented
- Innovative. Problem solving
- Communication skills. Transparency. Ethical behaviour
- Decision maker. Capable of initiatives
- Ability to motivate people and inspire changes
- Ability to manage and develop team members
- Elaborate a vision. Manage risks
- Technical knowledge of power supply solutions (33kV DNC, TPS, LPS, DGE…)
- Technical knowledge of the railway turnkey solution is highly appreciated
- Knowledge of project management tool (Microsoft Project, Primavera V6 (ADEL, PMS, SPR, MPR)
52
Power Supply Test Engineer Code Resume Examples & Samples
- To perform power supply testing, prototype modification, computer system and power supply characteristics testing as instructed
- System level and power supply level troubleshooting
- To review and perform power supply failure analysis with report
- To work with cross-functional teams for system testing and assist in product development
- Be familiar with power supply product specification, characteristic, performance, reliability testing procedure and board level prototyping
- To operate system and power supply testing equipment and oscilloscopes
- To modify power supply prototypes as instructed and soldering duties will be involved
- To perform product thermal testing as instructed and operate thermal chamber
- Education and/or Experience: BS degree in Engineering
- Knowledge of PC, System and Server operation
- Strong troubleshooting skills
- Experience and basic knowledge of computer and server hardware and architecture
- Experience with power supply or server system
- Experience with I2C, SPI, communication protocol is a plus
- Familiar with using oscilloscope
- Strong attention to detail, including accuracy and thoroughness
- Solid communications skills both verbal and written
- Electronics, digital and components knowledge background
53
Senior Power Supply Design Engineer Code Resume Examples & Samples
- Essential Duties and Responsibilities
- Ability to perform schematics design, BOM generation, debugging and testing of power supply
- Research, analyze and recommend new power supply design approaches
- Plan project, manage schedule and work to meet TTM (Time to market), reduce cost and improve product quality
- Evaluate current and future high efficiency & compact power supply design and recommend design modifications or enhancements to eliminate design roadblocks, improve product performance, and product quality
- Collaborate with system or lab validation testing engineers to discover and resolve any design, signal integrity, or quality related issues
- Create and review technical documentation including product specifications, layout instructions, test procedures, etc
- Support other teams & FAE for technical support and perform failure analysis
- Support sales to fix customer's problem
- Support Power Supply Product Manager for technical support
- Evaluate and debug design prototypes on the bench and generate detailed engineering reports of findings and recommendations
- BSEE/MSEE with 5+ years of direct experience with AC to DC server power supply design
- Abilities to work independently in a highly efficient way to achieve design goals with quality, efficiency, and with minimal supervision
- Strong analytical/problem solving skills, excellent written and oral communication skills
- Self-motivated, team player with ability to work in fast-paced environment
- High power density (30W~60W/cubic inch) design experienced is desired
- Familiar with simulation tools such as PSIM, PSPICE, Mathcad, Matlab and experience with I2C or PMbus interface
- Professional in power supply circuit analysis, simulation, and debugging
- Comprehensive knowledge of using new power devices
- Experienced in high power transformer design
- Experience with quality control aspect (ex. DFM, FMEA) for power supply manufacturing or design is desired
- About Super Micro Computer, Inc. Supermicro® (NASDAQ: SMCI) is a Top Tier provider of advanced server, storage, and networking solutions for Data Center, Cloud Computing, Enterprise IT, Hadoop/ Big Data, Hyperscale, HPC and IoT/Embedded customers worldwide. We are the #5 fastest growing company among the Silicon Valley Top 50 technology firms. Our unprecedented global expansion has provided us with the opportunity to offer a large number of new positions to the technology community. We seek talented, passionate, and committed engineers, technologists, and business leaders to join us
54
Power Supply Design & Interface Coordinator Resume Examples & Samples
- Assist the “POS and OCS Technical Manager” in his role of performing the basic and detailed power supply engineering activities of a traction project (metro, tramway or mainline),
- Responsible for the POS installation basic and detailed design, participate at the REX (Return of Experience) of the project
- Provide the drawings related to the scope of work: installation drawings, guidelines drawings, cables lists, etc…
- Validate the civil works drawings compared to the installation guidelines drawings,
- Provide technical support to Construction and Test and Commissioning teams with regards to installation design issues,
- Participate (if requested) to the As-built documentation drawings modifications.To lead in presenting the POS design to the Client and partner based on the design provided by the Indian team
55
Power Supply Testing & Commissioning Supervisor Resume Examples & Samples
- The Power Supply (POS) Testing and Commissioning Supervisor (based on site) reports directly to the Power Supply Testing and Commissioning (T&C) Manager and is in charge supervise the subcontractors or Alstom Team in order to check and to give the first approval about the Power Supply T&C’s equipment making sure that the installed equipments are tested in conformity with the test plan, standards and procedures, in compliance with the contractual obligations, the QA/QC system and the Time Schedule in place and forecasted cost
- Check the Testing & Commissioning program and discuss with his manager and subcontractors about the feasibility and the best way to execute
- Check all the instruments that the subcontractors or Alstom Team will use, if they are in good conditions and safety for the test
- Follow-up the Site Quality Plan defined at site on testing activity to control and master the Coordination of the teams, the Testing Process and guarantees the contractual requirements (checking and controls)
- Ensure that the Subcontractors equipment used to execute the tests is conforming to the local legislation
- Ensure the Subcontractors present and maintain on site the validity of the certificates (checking reports, gauging) of the equipment, instruments and tools used for the tests
- Report to the Testing and Commissioning (T&C ) Power Supply Manager and/or the Project Manager of all major events and decisions, which can have a major impact on the Site activity, and/or the general progress of the project. Propose the relevant measures of conservation
- Make sure that the subcontractor’s team members have the required abilities
- Check that the follow-up of the subcontractor’s measuring equipment, used during the tests, is made according to the quality clauses of the contract. Check the compliance and certificates of the testing equipment (filling the Inspection of Measuring Equipment sheet, IME)
- Minimum 2 years, as Testing and commissioning Supervisor in identical field
- Validated experience in HV, LV, traction and auxiliary electrical power system distribution testing follow-up and execution
- Special knowledge about electrical instruments of measurement as megohmmeter, oscillograph, hipot, ground tester, protection relays tester and contacts resistance tester
- Read and comprehension electrical schematic diagrams checking the functionality and if necessary propose small modifications or change within Engineer Team
- Read and comprehension all the electrical standards used in electrical system and subsystem for Subways
- Team spirit approach and good communication skills
- Available to Mobility
- Good knowledge of the traction and auxiliary energy distribution system, in terms of installation, testing and electrical protections setting
- Good knowledge of electrical HV network and substations, in terms of installation, testing and electrical protections setting
- Good knowledge of electrical protections and monitoring systems
- Knowledge of downstream activities as railway traffic, urban traffic regulation, and passenger stations utilities
- Good relationship with his subcontractors or Alstom Team
56
Power Supply Subsystem Manager Resume Examples & Samples
- 5 years Experience in Project Management
- 10 years experience in Trackwork projects
- Apply ALSTOM Discipline and Processes
- Use Seasoned Judgement
- Use Business Indicators
- Use Technical and Industry Experience
- Create Enthusiasm
- Foster Open Dialogue and Listens
- Manage Conflicts of Ideas
- Act as a Team Player
57
Principal Asic Power Supply Integrity Engineer Resume Examples & Samples
- Education – Must have a BS + 4 years experience, MS + 2 years experience, or PhD + 1 years experience in Electrical or Computer Engineering
- Language Fluency – Fluent in English Language – written & verbal, and can communicate clearly both verbally and in writing
- Travel < 5%
- Experience with advanced node (14nm and smaller) power grid physical design challenges
- Experience with low power SOC design technique
- Experience analyzing power grid integrity using industry-standard tools (e.g., Cadence Voltus, Apache Redhawk or Synopsys PrimeRail
- Fluency using scripting languages (e.g. Tcl/Tk, Perl, ksh, Python) to produce user-friendly application
- Strong understanding of electrical engineering fundamentals, including linear circuits
- Strong understanding of power estimation, power supply analysis, and power grid reliability
- Work effectively with global team and be self-motivated to solve problems
58
Power Supply & Distribution Integration Lead Resume Examples & Samples
- Support a cross-functional team to successfully complete the Product Adaptation and Integration obligations on time, with the objective of maximizing Customer satisfaction while incorporating all appropriate Governance processes
- Review/prepare all necessary design contract requirements for Traction Power system. Implement “workaround” plans to mitigate adverse effects of delays on the contract schedule
- Coordinate all concept design activities for power supply and distribution of all internal/external suppliers and regulatory authorities
- Coordinate with suppliers to ensure timely availability of design documentation and any other input (Compliance matrix / RAMS) for Traction Power scope
- Manage the related resources responsible ofr delivery of Power modelling reports and Operation Analysis
- Responsible to provide/review testing procedures for relevant systems (Traction Power system) to Testing & Commissioning team
- Provide/Review the specification of tests that are necessary to confirm successful system integration
- Ensure the integration and factory testing of the products at subsystem and integrated system levels, ensuring the Traction Power system is properly integrated and fit to support introduction to service
- Prepare/ present reviews, weekly and monthly reports to management. Collect all signalling data for compliance matrix process and RAMS
- Provide integrated reporting on progress, delay from sub-systems level to integration level
- Interface with partners to ensure Bombardier interface requirements are understood and met for Traction Power system scope of work
- Interact between with partners and subcontractors and home office staff. Ensure each party is fed designs to review and that comments are incorporated
- Interface with parties (subsystems design leads) to ensure fully completion of relevant ICD (Interface Control Document) between Traction Power System scope and other sub-systems and partners
- Support development of any specified tools, test equipment, training materials, and other enabling products necessary to efficient contract delivery of signalling and control system scopes
