Mfg Tech Resume Samples

4.8 (114 votes) for Mfg Tech Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the mfg tech job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
CU
C Upton
Cameron
Upton
862 Isadore Summit
Philadelphia
PA
+1 (555) 345 7998
862 Isadore Summit
Philadelphia
PA
Phone
p +1 (555) 345 7998
Experience Experience
Phoenix, AZ
Mgr, Sys Engrg / Mfg Tech
Phoenix, AZ
Bosco-Jacobson
Phoenix, AZ
Mgr, Sys Engrg / Mfg Tech
  • Assume role as Task Manager for all TSE Engineering Standard Work (ESW) tasks and ensure the execution of Engineering Standard Work
  • Continuing the development of Engineering Standard Work with GSE Discipline Chiefs
  • Insure production readiness for JSF and NGPF product lines as they move from development to production across all of SEV
  • Drive product cost reduction and insure War on Cost targets are achieved through process improvements and deployment of new technologies
  • -Repair technology development
  • -Support continued growth in Military Fleet Management programs
  • Communicate any technical issues and risks to SEV and program management in a timely manner
Philadelphia, PA
Eng, Sys Engrg / Mfg Tech
Philadelphia, PA
Cruickshank-Walsh
Philadelphia, PA
Eng, Sys Engrg / Mfg Tech
  • Work with FTI discipline manager to identify improvements to Engineering Standard Work
  • Drive the development & deployment of comprehensive Balance Process Engineering standard work
  • Establish, maintain, and execute product level plans
  • Creation, development, and maintenance of balance work instructions
  • Interface with commercial product line management (PLM) to secure priorities and understand programmatic issues
  • Provide onsite audits for military repair Suppliers and Overhaul Depots in support of repair Source Demonstration and Tooling qualifications
  • Use of ACE to identify opportunities to improve the tools, methods and processes used by all MSE FTI Engineers
present
Philadelphia, PA
Senior Eng, Sys Engrg / mfg Tech
Philadelphia, PA
Heaney LLC
present
Philadelphia, PA
Senior Eng, Sys Engrg / mfg Tech
present
  • Work with multiple outsource service providers and Manage the flow of information and task approvals
  • Work with senior staff members in Optical Engineering and Systems Engineering to develop high performance night vision and other optical systems
  • Drive the development & deployment of comprehensive assembly engineering standard work
  • Manage existing system architectures and develop architectures for new applications including use of Model Based Design
  • Supports the development, release, and management of System Technical Specifications
  • Identify improvements to Engineering Standard Work (ESW) during the execution of all assigned tasks
  • Identify and communicate technical issues and risks to discipline manager and program management in a timely manner
Education Education
Bachelor’s Degree in Initiative
Bachelor’s Degree in Initiative
Florida Atlantic University
Bachelor’s Degree in Initiative
Skills Skills
  • Participating in multi module center field investigations requiring knowledge
  • Building and maintaining a team with proper proficiencies, and coaching and mentoring of the team
  • Managing outsourcing by developing SOWs, placing purchase orders and verifying completion
  • Communicate any technical issues and risks to SEV and program management in a timely manner
  • Align Assembly Engineering resources with projects that support key business initiatives: Legacy IT into Solumina G7, Lean transformation
  • Promote the use of data driven root cause and corrective action tool usage to support the cell and SEV’s ACE Gold status
  • Effectively manage the Assembly Engineering support budget
  • Insure production readiness for JSF and NGPF product lines as they move from development to production across all of SEV
  • Drive product cost reduction and insure War on Cost targets are achieved through process improvements and deployment of new technologies
  • Creating and executing staffing plans
Create a Resume in Minutes

13 Mfg Tech resume templates

1

Manager, Systems Engrg / mfg Tech Resume Examples & Samples

  • Work with engineering, product management, supply chain, and operations to develop market leading cost effective and reliable products, realizing the most value for our customers
  • Ensure adherence to UPI and Standard Work during the execution of development programs
  • Ensure designs are in accordance with customer and applicable specifications; and
  • Interface with other functions to coordinate design and engineering activities, being the focal point in engineering for hoist development programs
2

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Create technical documents that provide engineering requirements for repairs, including a high level sequence of operations forming the basis for manufacturing operation sheets
  • Provide onsite audits for military repair Suppliers and Overhaul Depots in support of repair Source Demonstration and Tooling qualifications
  • Support the Customer in the resolution of field supportability issues
  • Support engine tear down and hardware inspection evaluations as needed (ACI’s)
3

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Leading a multi-discipline IPT to establish repair design requirements and resolve related technical challenges
  • Researching operating environments and understanding functionality of components, their interaction with mating parts, and developing strategies which will return damaged parts to service
  • Creating or reviewing technical documents that provide engineering requirements for repairs, including a sequence of operations
  • Participating in the prototyping of new repairs
  • Supporting Military customers in the resolution of field supportability issues
4

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Manage assignment of tasks to the project engineers and occasionally other L5 TSE practitioners ensuring that all tasks are executed. These duties include identifying the general project scope, determining priority, ensuring budget is available; and then ensuring progress is made towards task completion. This usually involves using Earned Value Management (EVM) techniques and an Integrated Master Schedule, and may include acting as the Integrated Product Team (IPT) Leader
  • Assume role as Task Manager for all TSE Engineering Standard Work (ESW) tasks and ensure the execution of Engineering Standard Work
  • Assume position on the TSE Achieving Competitive Excellence (ACE) leadership team and use the ACE tools to identify opportunities to improve the tools, methods and processes used by Project Engineers
  • Communicate any technical issues and risks to SEV and program management in a timely manner
5

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Manage program instrumentation design tasks; identifying the Project scope, creating the baseline plan, schedule including design reviews, print release, & P.O. placement, and budget management; and then ensuring progress is made towards task completion. This will involve provide Earned Value Management (EVM) information to the CAM and/or Integrated Master Schedule (IMS)
  • Establish and execute the hardware industrial plan, installation, and equipment support plans and activities that achieve rig or engine build milestones. This includes ordering and fabricating, or transfer from existing programs necessary hardware in support of MSE tasks. This may include source selection and post engine run assessment of equipment with associated creation of tasks to address any uncovered issues
  • Identify improvements to Engineering Standard Work (ESW) during the execution of all assigned tasks
  • Use of ACE tools to identify opportunities to improve the tools, methods and processes used by all MSE Project Engineers
  • Identify and communicate technical issues and risks to discipline manager and program management in a timely manner
6

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Lead a multi-discipline IPT to establish repair design requirements and ensure repairs are safe, durable, and meet the quality requirements of the OEM parts
  • Research operating environments and functionality of components, their interactions with mating parts, and develop strategies which will return damaged parts back to service
  • Participate in the prototyping of new repairs
  • Ensure repair tasks are completed to schedule and on budget (EVMS)
7

Mfg Tech, / Ii-purification st Shift Wed-sat Resume Examples & Samples

  • Sample preparation and testing
  • Perform scheduled cleaning of equipment
  • Assist in the assembly and disassembly of process equipment
  • 10% Staff Technical Training and Development
  • Meet and maintain training requirements
8

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Analyze, plan and establish tool requirements to support assembly/disassembly of validation/production engines/modules
  • Technical writing of tool usage instructions
  • Participate in P&W Integrated Product Teams (IPT) to help ensure assembly tooling designs can be produced, supported and maintained
  • Develop concepts for assembly/disassembly procedures
  • Actively Participate in development and qualification of assembly/disassembly tooling
  • Interface with customer and supplier representatives to identify requirements and resolve assembly tooling related issues
  • Ensure tooling is delivered on time and within budget
  • Daily support of operation needs
9

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Manage a team of Assembly Engineers to execute program requirements
  • Align Assembly Engineering resources with projects that support key business initiatives: Legacy IT into Solumina G7, Lean transformation
  • Promote the use of data driven root cause and corrective action tool usage to support the cell and SEV’s ACE Gold status
  • Effectively manage the Assembly Engineering support budget
  • Implement and execute engineering changes to insure customer requirements are met and build commitments are achieved
  • Develop, plan, & implement capital requirements to support productivity improvements, technology insertion and capacity for future programs
  • Insure production readiness for JSF and NGPF product lines as they move from development to production across all of SEV
  • Drive product cost reduction and insure War on Cost targets are achieved through process improvements and deployment of new technologies
10

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Create technical documents that provide engineering requirements for repairs
  • Interface with commercial product line management (PLM) to secure priorities and understand programmatic issues
  • Work with multiple outsource service providers and Manage the flow of information and task approvals
  • This is an IPT team member expected to be a supporter of the team process and a strong individual contributor
11

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Reliability and Safety design reviews and trade studies,
  • Failure Modes, Effects and Criticality Analysis (FMECA),
  • Functional Hazard Assessment (FHA),
  • Fault Tree Analysis (FTA),
  • Subsystem Hazard Analysis (SSHA)
  • Reports and System Safety Assessment (SSA) Reports,
  • Propulsion System Integrity Plan (PSIP)
12

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Establish, maintain, and execute product level plans
  • Define technical objectives Design Verification & Validation
  • Requirements Analysis and Development
  • Architecture Design
  • Adherence to Configuration Management and Change Control
  • Conduct/Participate in Design Reviews, Customer Audits
  • Matlab Experience
  • Ability and experience leading a team
13

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Estimating of the task times required to remove and replace the line replaceable components
  • Documenting the procedural steps required to perform selected maintenance tasks
  • Supporting the creation of mean time to repair models
  • Generating/facilitating Failure Mode, Effects, and Criticality Analysis (FMECA), reliability allocations and predictions, and integrating controls system reliability analyses into the propulsion systems analyses
  • Supporting reviews of development test failures and maintenance events, and review root cause and closure criteria provided by IPTs/CIPTs for adequacy
  • Monitor field RMS metrics to identify emerging issues and adverse trends, working with the responsible IPTs/CIPTs/Customer Support Engineering to identify root cause and corrective actions
  • Additionally the candidate will support integration activities and reviews with internal and external customers and air system contractors
14

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Manage requirements utilizing DOORS tool
  • Decomposes customer requirements and aid in the allocation of the requirements to the appropriate components and sub systems
  • Set availability targets, allocate to the subsystems and components, determine feature sensitivity to variation and failure modes, and determine mitigation plans to improve reliability targets
  • Ensure functional and safety requirements align with system requirements
  • Supports the development, release, and management of System Technical Specifications
  • Participates in reliability engineering, such as Fault Tree Analysis, Failure Modes and Effects Analysis, and System Safety Hazards Assessments
  • Collaborate with teams on V&V plan
  • Work with subsystem and component teams to optimize system design
  • Supports the scoping of Advanced Technology projects
  • Support project teams ensuring scope change is identified, documented and approved
  • Utilize the UTAS product introduction tools and systems on projects
  • Collaborate with geographically dispersed engineering teams globally and domestically
15

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Repair technology development
  • Repair production transition and source qualification support
  • Operational support to USAF, USN and foreign military depot operations
  • Operational support to Military aftermarket Service overhaul and repair business units
  • Support continued growth in Military Fleet Management programs
  • Support International sales campaigns and Military M&A activities
16

GEA Newark Mfg Tech Resume Examples & Samples

  • Be able to work safely in a manufacturing environment
  • Be responsible for preparation of fiber for coating and running CVD fiber coaters, following established procedures
  • Troubleshoot problems as they occur and assist in resolving issues
  • Perform post cycle maintenance of coaters
  • Minimum of 1 year of experience working with computer control systems in a manufacturing environment
  • Experience with CVD ceramic fiber coating operations
  • Experience operating machines working with computer control systems
  • Manual dexterity and demonstrated mechanical aptitude
  • Able to work independently with minimum supervision in a team environment
17

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Strong interpersonal communication skills (both verbal and written)
  • Well-developed technical skills and considered to be a fast learner
  • US Citizenship or Permanent Residency
  • Demonstrated ability to work in multidisciplinary teams
  • MATLAB Simulink knowledge highly desired
18

Semi Mfg Tech Resume Examples & Samples

  • FPA (focal plane array) mount to lapping pucks, lapping, shimming, and polishing of FPAs on pucks, inspection of FPAs pre and post lap, z-scope and FTIR measurements of critical detector thicknesses, FPA cleaning with solvents, entering of data for WIP tracking , and data entry onto traveler
  • Chemical mixing and understanding of safe chemical handling is required
  • Familiarity with microscope inspection and z-scope measurements is also required
  • Organize lab and request for supplies and chemicals as needed
  • Maintain high-level of cleanliness in lab
  • Troubleshoot process problems, define solutions, and execute experiments to improve yields & cycle time while decreasing costs
  • Basic computer knowledge - Word and Excel desired
  • Wafer & IC handling
  • Wet & dry etching
  • Microscope inspections
  • Z scope measurements
  • Excellent manual dexterity and hand/eye coordination
  • US Citizen or Permanent Resident Status Required
19

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Managing cost, schedule and delivery requirements for tooling
  • Creating and executing staffing plans
  • Managing outsourcing by developing SOWs, placing purchase orders and verifying completion
  • Building and maintaining a team with proper proficiencies, and coaching and mentoring of the team
  • Continuing the development of Engineering Standard Work with GSE Discipline Chiefs
  • Ensuring resolution of tooling issues and MERLINs in a timely manner
  • Driving the daily active use of ACE tools to improve processes and achieve objectives
  • 10-15+ years of tooling or product development experience. Aftermarket experience and exposure to USAF/USN/JPO customers is preferable. Candidate should have prior supervisory experience, and EVMS knowledge. Must have demonstrated leadership, interpersonal, teamwork, communication, and inter-organizational networking skills. Excellent written and verbal communication skills required. Familiarity with repair/manufacturing processes such as machining, plating, plasma spray, welding & brazing is desirable
20

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Work with senior staff members in Optical Engineering and Systems Engineering to develop high performance night vision and other optical systems
  • Complete designs of optical systems, including generation of drawings, specifications and summary reports
  • Design and performance analysis of systems, budgeting of system and/or component performance parameters, modeling of optical testing configurations, and participation in system integration/alignment
  • Interface with suppliers, customers and members of the UTAS technical design team
  • Work closely with Mechanical Engineering to design and integrate optical systems into ruggedized, lightweight assemblies and products; experience with athermalization a plus
  • Test support, including writing test plans, procedures and designing test fixtures and test equipment
  • Support formal design reviews and presentations to customer
  • Contribute to proposals and technical leadership on new business opportunities
  • Compliance with budget and schedule is essential. Experience with cost account management a plus
  • 7+ years of relevant industry experience
  • Demonstrated documentation / organizational skills
  • Applicant will be well versed in the use of optical design software including ZEMAX and FRED
  • Experience with qualification testing of optical systems is desirable, including the design of STE/ATE
  • Systems Engineering experience in Electro-Optical Infrared (EO/IR) systems a definite plus
  • Ability to obtain a DoD Clearance
  • US Persons Required
21

Temp-semi Mfg Tech Resume Examples & Samples

  • FPA (focal plane array) lapping, demount from lapping pucks, FPA etch, inspection of FPAs pre and post etch, z-scope measurements & FTIR measurements of critical detector thicknesses, hand painting of photoresist onto specific circuitry, entering of data for WIP tracking purposes and calculations for etch times, FPA cleaning with solvents, and data entry onto traveler
  • Good manual dexterity is required for FPA handling
  • Maintain detailed records such as travelers, SPC charts & data entry into X Factory
  • Schedule and coordinate WIP for efficient movement of wafers or FPAs
  • Operate semiconductor equipment
  • Basic computer knowledge - Word and Excel desired o Wafer & IC handling
  • Lapping
  • Z scope & FTIR measurements
  • Chemical handling procedures
  • Clean-room protocol
  • Lab safety
  • Must be able to work using hands with good manual dexterity to handle small parts
  • Must be able to handle and work safely with chemicals specific to FLIR manufacturing processes
22

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Record of academic excellence
  • Strong interest in, and acumen for, systems-based analytical thinking
  • Demonstrated record of solid work ethic
  • Prior experience in industrial setting preferred (e.g., internship or co-op experience)
  • Ability to work in team-based matrixed environment
23

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Excellent time management and organizational skills with the ability to multi-task to meet deadlines and customer needs
  • Highly analytical with strong communication skills and a flair for creativity
  • Self-Initiator, self-motivated, critical thinker, embraces challenges
  • Strong teamwork ability a must
  • Focused attention to detail and personal ownership of tasks is essential for success
24

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Modeling in Matlab
  • Development Testing, Verification & lifecycle documentation
  • Manage many tasks simultaneously
  • Lead a team
  • Effectively communicate with all levels of the organization
  • General experience with hardware design is a plus
  • Motor/Hydraulic controls experience (AC, DC, etc) is a plus
  • 5+ yrs. of experience. Applicant must have good interpersonal skills with the ability to work in a team environment. Applicant should have the ability to apply basic electrical and mechanical principles to design and/or analyze system interactions. Background and experience in electro-mechanical systems and digital electronic circuitry, preferably in the aerospace industries is desirable. Good customer communication skills
25

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Design and development of advanced sensors and measurement techniques to validate physics based analytical models, uncertainty analysis including error propagation, sensitivity analysis and error budgeting, and basic experimental design
  • Perform complex measurement system analysis using advanced statistical analysis methods including Design for Variation and multivariable regression techniques, temporal analysis techniques, spectral analysis, and joint time-frequency analysis
  • Integration of experimental results with analytical modeling capabilities throughout different facilities/rigs/engines
26

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Oversee configuration management of the graphically driven BOM in Teamcenter
  • Provide leadership to outsourcing teams, including creating, managing, and approving SOW’s
  • Develop engineering solutions with suppliers as a result of
27

Mfg Tech B Resume Examples & Samples

  • Document Control
  • Electro/Mechanical Assembly
  • Perform varied tasks of intermediate complexity with moderate supervision
  • Basic and some intermediate skill to perform functions in the execution of existing procedures, techniques, tools, materials and/or equipment to the position within assigned area
  • Assist in advanced tasks as part of training and development
  • Resolves routine questions and problems, and refer more complex issues to higher levels
  • Additional specialized courses or short-term training (one year or less) with minimum of 3 years of experience OR Associates Degree, Technical/Business School Certificate or Diploma, Skilled Trades Apprenticeship, or other post high school training (two years duration) with a minimum of 1 year experience
  • Preferred candidate should show interest in earning NASA soldering certification
28

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Create and maintain prescriptive assembly floor work instructions (including specifications, engineering changes, QAD/process control, and tooling definition/requirements.)
  • Provide focused & effective leadership in eliminating EH&S/Ergonomics/Human Factors risks and addressing quality issues
  • Identify & implement shop floor process optimization & control methods to eliminate/prevent QCPC turnbacks /escapes and reduce overall assembly costs
  • Participate in ACE initiatives supporting the achievement of ACE GOLD in SEV
  • Excellent communication / presentation skills
  • Strong project engineering/planning skills
29

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Leading an engineering team responsible for the design, validation, and demonstration of military repairs, with associated tooling
  • Managing all aspects of military repair delivery, including schedule, cost, quality, and successful execution
  • Managing the team’s finances by creating budgets, execution plans, and staffing plans to support the OMM planning process. Determine and execute hiring and outsourcing needs
  • Executing the Market Feedback Analysis (MFA) process for PW internal and external customers. Manage Military customer expectations to ensure a delighted customer
  • Driving continuous improvement activities and robust root cause investigations to ensure GSE and PW continue to deliver World Class customer and shareholder value
  • Coach/guide/mentor employees to ensure appropriate proficiency advancement and employee satisfaction
30

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Knowledge of project planning processes for project schedules & budgets
  • Good problem identification and problem solving skills
  • Excellent communication skills for daily interaction with various team members
31

Mfg Tech A Resume Examples & Samples

  • Configuration Analysis
  • Manufacturing/Operational Technical Support
  • Perform varied moderately complex manufacturing tasks of minimal supervision
  • May adapt new procedures, techniques, tools, materials and/or equipment to meet the more complex requirements of the position
  • May periodically assist in orientating, training, assigning and checking the work of other employees
32

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Creation, development, and maintenance of balance work instructions
  • Leading the Process Certification effort for each part/assembly balance
  • Managing the balance machine tool specifications for the balance area including function, calibration and maintenance
  • Leading transition of balance process solution to the production environment including training
  • Drive the development & deployment of comprehensive Balance Process Engineering standard work
  • Driving design-for-assembly/manufacturability (DFA/DFM) and module/part-family assembly process standard initiatives, working closely with all CIPTs/Module Centers, Mechanics, Operations Leaders
  • Actively participate and drive EHS initiatives within the balance discipline
  • Participate in ACE initiatives supporting the achievement of ACE GOLD in the SEV
33

Mgr, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Excellent leadership, communication, problem solving, analytical, prioritization and multi-tasking skills
  • Highly motivated and able to drive tasks to completion
  • Ability to work with all levels of management
  • Working knowledge of continuous improvement principles (e.g. ACE, QCPC)
34

Semi Mfg Tech Resume Examples & Samples

  • Mounts semiconductor wafers & die onto aluminum pucks
  • Thins semiconductors using recipe-driven automated equipment, using FANUC and G code based operating system. Capable of using non-contact measuring systems, such as interferometer and laser based systems
  • Demounts semiconductor devices from aluminum pucks, cleans them using solvents, and enters data into traveler and WIP tracking database
  • Inspects demounted devices using a microscope
  • Maintains detailed records such as travelers, SPC charts & data entry into EXCEL
  • Maintains high-level of cleanliness in lab
  • Schedules and coordinates WIP for efficient movement of wafers or die
  • Troubleshoots process problems, defines solutions, and executes experiments to improve yields & cycle time while decreasing costs
  • Attention to detail is required to ensure proper documentation and maintenance of travelers and when operating semiconductor processing equipment
  • Communication Skills-Oral, Listening & Written required ensuring that procedures and methods are easy to understand and interpret. Listens attentively without interrupting and/or being distracted by other things
  • Collaboration and Teamwork required to maintain open group communication and relationships, to refine processes and implement process improvement
  • Coping skills required to be able to stay focused, calm and cool with multiple demands and deadlines from superiors, subordinates and peers while maintaining focus on demanding deadlines and changing priorities
  • Flexibility is required having the ability to quickly adapt to changing requirements, special assignments and workload reprioritization
  • Initiative required displaying strong personal initiative and motivation to achieve desired performance results
  • Strong Organizational and Planning Skills are required to facilitate lab maintenance and resources
  • Must be willing and able to work second shift hours. Monday through Friday
  • Must be proficient in basic math and EXCEL computer skills. Familiarity with FANUC and G CODE is a plus
35

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Demonstrate progressively responsible experience in a systems design environment
  • The candidate requires excellent communication skills with all levels of an organization with the ability to facilitate teamwork across functions
  • Strong experience in design practices with consideration for system level performance and aerospace certification requirements
  • Manage existing system architectures and develop architectures for new applications including use of Model Based Design
36

Eng, Sys Engrg / Mfg Tech Resume Examples & Samples

  • Familiar with basic instrumentation including pressure transducers, thermocouples, RTD’s, strain gages, RVDTs, accelerometers, pressure scanners and proximity probes. Ability to trouble shoot sensors
  • Familiar with ruggedized acquisition hardware made by ACRA Controls (Curtis Wright), Zodiac Data Systems, Teletronics Technology Corporation and Quad Tron
  • Familiar with configuring ruggedized acquisition hardware using supplied GUI interfaces
  • Familiar with setup, configuration and operation of On Board Data System hardware
  • Experience with ICADS and PCS picture development
  • Provide support at remote locations when scheduled
  • Plan instrumentation packages with internal and external customers
  • Work with FTI discipline manager to identify improvements to Engineering Standard Work
  • Use of ACE to identify opportunities to improve the tools, methods and processes used by all MSE FTI Engineers
  • Support efforts to increase efficiency and minimize waste in organizational processes
37

Senior Eng, Sys Engrg / mfg Tech Resume Examples & Samples

  • Perform graphical model data conversion (between Unigraphics & Catia) and maintain related Bills of Material in Product Data Management systems
  • Perform graphical model clash checks and communicate results to engineering focal points and key suppliers
  • Transfer concept to production design phases data between suppliers and customers using various managed file transfer sites
  • Manage configuration data to track the release of propulsion level graphical assembly arrangements
  • Coordinate with personnel located at other facilities to load engineering changes into Airframer’s Product Data Management databases
  • Work with subject matter experts to update Digital Mock - Up Protocol's to maintain process standards
  • Attend Change Board meetings and assist subject matter experts to maintain DMU arrangements and related configurations