Mechanical Engineering Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the mechanical engineering technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

F Tromp

Florida

Tromp

36532 Kub Plaza

Detroit

+1 (555) 957 2216

36532 Kub Plaza

Detroit

Phone

p +1 (555) 957 2216

Experience Experience

Phoenix, AZ

Mechanical Engineering Technician

Phoenix, AZ

Schneider, Erdman and Sipes

Phoenix, AZ

Mechanical Engineering Technician

Assisting in the configuration management of documentation
Perform quality inspections on co-worker’s work
Carry out 1st level defect identification & elimination through use of effective problem solving techniques, including Route Cause Analysis, 5 whys etc to avoid abortive & inefficient working
Sets up and tests complete prototype units and subassemblies under operational conditions. Devises, fabricates, and assembles new or modified mechanical components or assemblies
Estimates work load to establish completion dates
Perform other duties as directed by the Manager
The main purpose of this position is to conduct mechanical verification of equipment and processes to meet quality and efficiency objectives. Being proactive in identifying and resolving mechanical, product, and process related quality concerns

Boston, MA

DP Ns-mechanical Engineering Technician Month Industrial

Boston, MA

Medhurst-Pfeffer

Boston, MA

DP Ns-mechanical Engineering Technician Month Industrial

Providing mechanical / structural input to plant augmentation project development
Carrying out maintenance, major overhauling works on 660 MWe Drax boilers and fuel storage & handling infrastructure
Providing consultant services to the power station Generation & Maintenance operations
Eurocodes and British Standards for the design, material selection
Carrying out designs, preparing enquiries, reviewing tender submissions and supervising contracts for construction and maintenance projects
Supervising Consultants carrying out design services for projects
Microsoft office package

present

Phoenix, AZ

Senior Mechanical Engineering Technician

Phoenix, AZ

Anderson and Sons

present

Phoenix, AZ

Senior Mechanical Engineering Technician

present

Assist engineering staff in prototype development and test
Perform assembly and testing of small tubing components by adhesive bonding, or heat reflowing
Willingness for active participation, active listening, interpreting, cooperation and flexibility to allow for a successful self-managed team
Work with engineering on build/test fixturing
Perform experiments and tests associated with a variety of projects as assigned by engineering
Performs other related duties and responsibilities, on occasion, as assigned
Assist in the integration of commercial, customer, and internally designed mechanical components onboard surface systems

Education Education

Bachelor’s Degree in Mechanical Engineering Technology

Ohio University

Bachelor’s Degree in Mechanical Engineering Technology

Skills Skills

Ability to review documentation, processes and/or product with high level of detail
Knowledge and skill in engineering record keeping procedures and methods, with the ability to rapidly master Smiths Medical internal procedures and methods
Strong oral and written communications skills and solid computer skills in Microsoft Office
Excellent brazing skills, strong HVAC troubleshooting skills
Knowledge of QSSOPs, GMP/FDA/ISO 9001, etc., principles and ability to integrate into software engineering discipline
Ability to produce good verbal and written communication
Ability to transfer knowledge to operators, assembly and test technicians
Profitability assessments test data/results and provide test reports
Strong multi-tasking skills, ability to handle multiple projects
Strong organization skills

Create a Resume in Minutes

14 Mechanical Engineering Technician resume templates

Read our complete resume writing guides

Mechanical Engineering Technician Intern Resume Examples & Samples

Build prototype catheter designs using various catheter assembly techniques
Perform mechanical testing such as tensile, torque and column buckling on the prototypes
Work with a multidisciplinary team of engineers and scientists to coordinate daily activities and goals
Knowledge on raw materials, machining processes, and quality control

Mechanical Engineering Technician Resume Examples & Samples

Set-up prototypes and audits for air management systems and combustion performance tests
Test furnaces for safety, noise, vibration, and power performance
Trouble shoots and diagnoses furnace performance and safety problems
Operate, maintain and calibrate laboratory equipment and instrumentation
Support development of new furnaces and components
Manage and maintain data in test database archives
Build, wire and troubleshoot test set ups for components
Perform various electrical, mechanical tests following written test instructions and test reports
Under minimal supervision performs varied and moderately complex tasks
Principle component testing responsibility for product use through to complete test cycle
Profitability assessments test data/results and provide test reports
May adapt new procedures, techniques, tools, materials and /or equipment to meet the more complex requirements of the position
May periodically assist in orienting, training, assigning, and checking the work of other employees
Requires a high school diploma or an equivalent combination of education and experience. Requires at least 2 years related experience

Mechanical Engineering Technician Resume Examples & Samples

Under immediate supervision, assists mechanical engineers in the planning and testing of HVAC mechanical components, equipment, and machinery
Sets up and tests complete prototype units and subassemblies under operational conditions. Devises, fabricates, and assembles new or modified mechanical components or assemblies
Record test procedures and results using numerical and graphical data
Helps prepare proposals and cost estimates
Estimates work load to establish completion dates
Requires a high school diploma or an equivalent combination of education and experience

Mechanical Engineering Technician Resume Examples & Samples

Are creative and innovative at their core
Like to be involved in the details
Likes to be involved at the beginning and see projects through to the end
Can juggle multiple projects at various stages of maturity

Mechanical Engineering Technician Resume Examples & Samples

Set up and test prototype HVAC units and sub-assemblies
1 or 2 year degree in HVAC and possess experience in testing and development of air conditioners and heat pumps, and/or
High school degree and at least 2 years field service HVAC experience with a working knowledge of heat transfer and air performance
Skill set requirements include EPA Certification for refrigerant handling
Excellent brazing skills, strong HVAC troubleshooting skills
Strong oral and written communications skills and solid computer skills in Microsoft Office
Additional desired skills include working knowledge of AHRI 210-240, AHRI 340-360, UL-1995 and ISO 17025 standards

Aircraft Mechanical Engineering Technician Resume Examples & Samples

Experience with AutoCad, NX, and/or Solid Edge
Experience with aircraft structural design and analysis
Experience with electro-mechanical systems design
Ability to write clear, concise, factual and detailed documentation
Bachelors Degree in Engineering or Engineering Technology highly desired
Experience in Navy/Marine Corps aviation Logistics Systems extremely helpful
Communication (Oral/Written)
Detail-oriented
Engineer

Mechanical Engineering Technician Resume Examples & Samples

Experience with machine design
Experience with K-C Design Standards and Drawing Control Standards
Experience with High Speed Converting Equipment
Work assignments are primarily task based. Typical tasks include initial research into solutions to design problems, equipment checkouts, and drawing initiation and updates. You will be part of an engineering team using personal computer engineering tools and computer aided design software
Safety awareness - Knowledge of conditions that affect employee safety in order to be proactive in addressing hazards and risk
Initiative - Influences events to achieve goals, originates action, and introduces one’s thoughts or actions into a situation
Teamwork - Makes positive contributions to the success of the team, facility, and corporation. Demonstrates a positive attitude. Ability/desire to work with the team. Adjusts quickly to changing priorities. Contributes to and supports team decisions
Personal Sensitivity/Integrity - Demonstrates a consideration for the feelings and needs of others and awareness of self. Treats others with respect. Willing to do what is asked of others
Job knowledge/Analyzing - Demonstrates a growing knowledge of job skills. Effectively performs all required tasks. Troubleshoots and solves problems using logical thinking. Demonstrates attention to details and knowledge of product and process requirements
Leadership/Communication - Demonstrates effective written/oral communication skills. Leads or participates in meetings. Helps to develop other team members’ skills. Provides leadership when situations require

Mechanical Engineering Technician Resume Examples & Samples

Requires practical knowledge of engineering methods and techniques related to design, development, test, and prototype production
Be able to follow documented procedures and methods for assembly
Able to test components with supplied test instructions

Mechanical Engineering Technician, GS Resume Examples & Samples

Experience in the operation, maintenance and repair of marine/mechanical equipment such as pumps, turbines, generators, and diesel engines; and the adaptation of modern instrumentation and data acquisition systems in Engineering Laboratories
Experience in the installation, operation, and calibration of modern power plant equipment including instrumentation systems
Experience applying various training methods and techniques to develop the laboratory course, to interact with individual studentS or groups, to measure, guide, and aid their training progress, to contribute to the laboratory course improvement, and to learn and incorporate new engineering skills and manufacturing techniques into the program

Mechanical Engineering Technician Resume Examples & Samples

Performs Design Verification Tests (DVT‘), bench tests and other evaluations
Participates in writing DVT protocols and reports
Assist in the design and construction of test fixtures and prototypes to accomplish assigned testing goals
Work in R&D lab to produce test fixtures, prototypes and modified hardware for testing
Analyzes and ascertains the validity of test results
Coordinates with internal, mechanical and software engineers and technicians to resolve problems encountered during testing
Provides project schedule input for test activities and/or status to project leader or lead engineers
Carries out assigned tasks in the most efficient manner possible
Records, evaluates and analyzes data and report findings; makes recommendation regarding these findings
Documents in Laboratory Notebook test results including test objectives and interpretation of data
Stores and retrieves computer data files generated during testing in a manner that allows linkage back to the formal test protocol and report
Maintains existing equipment/fixtures. Recommends new/updated items where applicable
Help develop and maintain 6S and lean initiatives
Coordinates building, debug, validation, documentation of product development aids and fixtures
Develops forms to capture engineering data
Generates sketches of equipment for drafting of equipment drawings (schematic part drawings)
This position is required to assure compliance of Company operations to all applicable laws, regulations and standards, good business practices and company documented procedures (including but not limited to FDA, Quality Systems Regulations, ISO 13485, ISO 14001, government occupational health and environmental regulations and statutes)
Engage others, promote, and participate in Environmental, Health, and Safety initiatives, focusing on continuous improvement
Two-year Vo-Tech Certificate in electronics or related technical field and seven or more years progressive experience as an engineering technician in an mechanical engineering or testing organization; High School diploma or equivalent and twelve years progressive experience as an engineering technician in a related position within a manufacturing or testing organization also meets minimum requirements
This is the third-step position along the engineering technician career path. To qualify for internal promotion, the most recent annual performance appraisal as an Engineering Technician III must be at "Exceeds Position Requirements" level, or above
Certified IPC specialist (CIS) that meets the IPC-A610 Standard for Acceptance Criteria for Printed Circuit Board Assemblies preferred
Knowledge of basic mechanical and mechanical theory related to medical devices and practice is required
Basic technical drawing/drafting skill
Knowledge and skill in engineering record keeping procedures and methods, with the ability to rapidly master Smiths Medical internal procedures and methods
Knowledge of QSSOPs, GMP/FDA/ISO 9001, etc., principles and ability to integrate into software engineering discipline
Ability to assist in projects of limited scope and impact or portion of a major project. Uses judgment in the planning, scheduling and coordinating of project phases and resources, as well as the selection of techniques and criteria. Strong analytical and problem solving skills required. Ability to guide project team members in troubleshooting and carrying out project related activities
Possesses and applies knowledge of principles, practices, and procedures in mechanical technology in order to complete assignments of significant difficulty. Knowledge is evidenced by past job progression/performance
Ability to read mechanical schematics, and mechanical drawings
Ability to provide guidance and direction to lower level engineering technicians
Ability to produce good verbal and written communication
Uses judgment to make minor adaptations and modifications to conventional techniques
Demonstrated verbal communication skills
Ability to work with engineering staff members and with other groups in the company in an effective and leadership manner. Ability to provide guidance to new team member, peers, and lower level engineering technicians
Ability to assist in the design of small fixtures, testers, and assembly aids for production

Mechanical Engineering Technician Resume Examples & Samples

Ability to assist in the design of small fixtures, testers, and assembly aids for production.PLANNING AND DECISION MAKING
Works under some functional supervision, usually taking direction from supervisor or engineering project leader. Receives instructions on specific assignment objectives, complex features, and possible solutions
Operates with a some amount of latitude and freedom to act; supervisory review/approval required only on new project plans, or significant changes to existing plans. Within these constraints, may provide assistance in leading minor projects, selects suppliers and contributes to supplier technical improvements; develops plans, conducts tests and evaluates results; coordinates record keeping of engineering data and related drawings; designs components or parts; performs troubleshooting requiring expertise related to mechanical engineering
No sign or budgetary authority. May generate purchases against pre-approved, open purchase orders
Work direction is provided by the supervisor or the engineering project leader of the team assigned to. This position has not authority to delegate assigned work without prior approval of supervisor or project engineer. Work may be delegated to junior technicians of the project team
May give limited direction or technical advice to less experienced engineering technicians who assist him/her on specific assignments or others within work unit

Electro Mechanical Engineering Technician Resume Examples & Samples

Provide technical support to the Manufacturing effort as needed
Support maintaining procedures and equipment used for manufacturing robotic products
Assist engineering in sustaining activities to address life cycle issues, continuous improvement, reliability, and cost reductions
Work with Product Development on new product introduction (NPI) as part of a cross-functional team
Build electro mechanical test fixtures and assembly aides for use in manufacturing
Assist in product builds if needed to meet production demands
Generate change orders to update documentation and BOMs for released product
Requires a high school degree or its equivalent with at least 5 years of experience in the field or in a related area
Familiarity with GMP environment – reading, checking, updating BOMs, schematics, and machining drawings
Familiar with IEC and IPC standards
Experience with large capital medical equipment a plus
Ability to build electro mechanical fixtures
Bachelor’s Degree with a minimum of 1-4 years of mechanical engineering experience
Familiarity with ISO requirements, FDA Regulations, and cGMP’s a plus
Experience with Solidworks a plus
Familiar with a variety of industry concepts, practices, and procedures
Ability to travel up to 5% of the time

Mechanical Engineering Technician Resume Examples & Samples

Fabricate, update and repair structural assemblies and subsystems used inside prototype and production UAVs
Build and install subassemblies on aircraft and ground station equipment
Troubleshoot flight and ground hardware and software using electronic lab test equipment
Resolve subsystem and vehicle electrical and electronic issues
Generate procedures and work instructions with support from vehicle design teams
Support vehicle performance testing
2 year technical degree in a mechanical field or equivalent
2+ years building complex electronic and/or electro-mechanical products
Basic engineering knowledge: mechanical, electrical, software
Able to work with minimal supervision and with ambiguity
Mechanical and electrical integration/assembly experience
Strong mechanical and assembly skills
Ability to prioritize in a complex, fast paced environment
Demonstrated analytical, written, and oral communication skills
Work with hand tools and have knowledge of the applications
PREFERRED QUALIFICATIONS
Experience operating power equipment and shop equipment including mills, lathes and or routers
Experience creating and analyzing CAD files based on loose specifications

Mechanical Engineering Technician Resume Examples & Samples

Experience with setting up electronics, electro mechanical test set ups preferred
Basic understanding and demonstrated experience with voltage/current/resistance and use of ohms law
Must be able to work independently with minimal directions
Out of the box thinker
Report writing experience
Work on multiple projects

Mechanical Engineering Technician Resume Examples & Samples

Experienced with setup of electronic and electromechanical tests setups required
Experienced with setup and testing of HVAC units and sub-assemblies
Knowledge of HVACR operation principles, and Strong HVAC troubleshooting skills
EPA Certification for refrigerant handling preferred
Strong Brazing Skills
Must be proactive and able to work independently with minimal directions
Report writing experience utilizing Microsoft Excel, Word, Powerpoint
Strong multi-tasking skills, ability to handle multiple projects

DP Ns-mechanical Engineering Technician Month Industrial Resume Examples & Samples

Microsoft office package
Analysis software
Eurocodes and British Standards for the design, material selection
QA systems

Mechanical Engineering Technician Resume Examples & Samples

Perform various engineering tasks involving such functions as analysis, design, development, test, installation and service, while working from instructions, drawings, proposals, specifications, and other pertinent information
Consult with other engineering groups to ensure that specified engineering criteria are suitable for the proposed application, and recommend revisions, as appropriate
Plan, conduct or coordinate relatively straight-forward engineering analyses and tests, and prepare related reports and summaries, for review

Mechanical Engineering Technician Resume Examples & Samples

Adhere to standard procedures
Document assembly operations and vehicle modifications
Perform quality inspections on co-worker’s work
2-year technical degree in a mechanical field or equivalent
Work with hand tools
Experience in aerospace or robotics
Possess FAA Airframe and Power plant (A&P) License

Senior Mechanical Engineering Technician Resume Examples & Samples

Maintenance of unmanned surface vehicle (USV) mechanical systems to include propulsion system, hull and structure, and payloads
Assist in the integration of commercial, customer, and internally designed mechanical components onboard surface systems
Troubleshooting of propulsion and other mechanical systems
Assist engineering staff in prototype development and test
Operation of unmanned surface systems
Operation of support craft (chase boat)
Support of offsite surface systems operations to include testing and demonstrations at customer sites and onboard ships
Take an active role in general lab maintenance, safety, and shelf life tracking
Understanding of mechanical systems, particularly maritime propulsion systems
Willing to travel (50%-75%)
Familiar with basic hand and power tools
Ability to interpret design drawings and schematics
Ability to organize and prioritize assigned tasks
Ability to work in a fast paced, dynamic environment
Ability to obtain and maintain a SECRET security clearance is essential
Willing to work extended hours as required both at Textron facilities and offsite
Willing to adjust work schedule to meet program needs
Ability to work outside in extreme weather conditions and on the water at long distances from land
Ability to work in tight quarters and confined spaces
Ability to swim
Associate Degree in specialized technology with at least 2 years’ experience
Metal fabrication skills a plus
Experienced small boat handler
Current safe boater certificate
Current first aid and CPR certificates a plus
Current DOT certification
Experience with unmanned systems, surface systems, and military operations and integration a plus

Mechanical Engineering Technician Resume Examples & Samples

Design, fabrication and assembly, implementation, and documentation of manufacturing process tooling
Creation of test fixture solutions, ranging from simple work-holding devices, to more complex, motor-driven automated systems
Management and maintenance of the mechanical engineering laboratory and parts crib
Communication with in-house machinists, as well as external suppliers
Active participation in development team meetings and reviews
3-5+ years of related experience
Be motivated to get the job done
Have an aptitude for mechanical design
Desire to learn and grow
Be comfortable taking ownership and responsibility
Effectively manage his/her time
Be able to shift focus and remain effective when priorities change
Successfully collaborate and function in a team environment
Have experience with CAD software and be comfortable with typical computer applications

Mechanical Engineering Technician Resume Examples & Samples

Monitor equipment during production to identify mechanical issues contributing to product quality and efficiency
Collect, monitor and communicate key quality metrics impacted by equipment and processes to support continuous improvement
Support manufacturing personnel through development, training, and implementation of new processes and equipment
Work with Process Technicians and Production Management to enhance equipment and processes. Develop and document standard operating procedures
Support Lean Initiatives within the manufacturing environment
Work closely with Manufacturing personnel and Documentation Technicians to develop assembly and test procedures concurrent with the product design
Obtain part numbers from Manufacturing Engineering for new fixtures, special tools and test connectors and work with Documentation Specialist to include in appropriate shop floor work instructions
Perform other duties as directed by the Manager
Ability to review documentation, processes and/or product with high level of detail
Ability to transfer knowledge to operators, assembly and test technicians
Experience with high level manufacturing systems, such as MRP or ERP
Working knowledge of MSOffice programs, i.e., Word, Excel, Outlook
Strong experience in reading and communicating technical drawings
Experience with soldering and soldering inspection techniques
Excellent organizational and interpersonal skills
Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Familiarity with necessary measuring tools; micrometer, caliper, measuring tape etc…
Understanding of Algebra & Geometry is a Plus
2 Year Technology Degree (Engineering Preferred) or equivalent experience
5+ years of manufacturing experience, supporting operators and equipment
Prior experience with wire and cable manufacturing equipment preferred but not required
High School Diploma or General Education Degree

Senior Mechanical Engineering Technician Resume Examples & Samples

May assist discipline or department management in developing and communicating appropriate design standards and process improvement activities
Identify training and development needs for personnel they supervise
May be recognized for expertise in one or more areas
Associate Degree in Drafting or an Engineering Design Related Technology preferred
A minimum of 8 years related work experience

Mechanical Engineering Technician Resume Examples & Samples

Provide support for engineers as requested
Conduct vehicle builds with replacement and retrofit of chassis components (brakes, tires, dampers, etc…)
Design and build electrical harnesses for prototype vehicles and lab equipment
Identify and procure/order parts necessary to complete builds
Track, budget, and perform vehicle maintenance as needed
Assistance with other tasks as needed and determined by Management
Support CES segments (Chassis, Interior, and Powertrain) with special projects as needed
Mechanical fabrication of misc parts ( brackets, bezels, etc…) for prototype vehicles
Document maintenance (equipment tracking, BOM, inventory, etc…)
Provide support to Vehicle application teams for identification to root cause issues
Support data acquisition and reflash activities as needed
Support bench testing as needed
Experience with Automotive Electronic/Electromechanical Products
Good communication skills with CES team, internal & external customers
The ideal candidate is disciplined, and can work independently and within a team environment
Well organized, Proactive, Self motivated, Reliable and Dependable
High School diploma, or GED
Minimum of 5+ years experience as a mechanical technician within Automotive, or related industry (professional experience may include internship or Co-Op experience)
Must have prior experience conducting vehicle builds Chassis components
Must have experience working with wiring harnesses, plastics and mechanical components
Associates degree in Engineering
7+ years experience as an automotive mechanical technician
PCB soldering of surface mount components
Read electrical diagram and schematics
Fluent in Microsoft products

Mechanical Engineering Technician Resume Examples & Samples

Carry out 1st level defect identification & elimination through use of effective problem solving techniques, including Route Cause Analysis, 5 whys etc to avoid abortive & inefficient working
To provide local engineering support to the production unit. This will include, but not limited to
Follow and implement Safe Systems of Work for daily activities, providing the highest HSEQ standards
Delivery of first line maintenance to the plant
Completion of planned and preventative maintenance routines
Use of problem solving tools & techniques to accurately diagnose problems / defects
Pro-actively working with the manufacturing team, to assist with the co-ordination and execution of work effectively to minimise downtime
Identify & assist in the implementation, independently or as part of a team, reliability improvements, communicating feedback on improvements made
Liaise with Term Contractors for efficient execution of work (i.e. Interserve, Cape etc)
Developing and using Engineering Guides, check sheets and Routine Maintenance Documents for maintenance activities
Effective Use of SAP, including continually improving Bills of Materials, accurate & descriptive technical reports, time bookings etc
Maintain effective communication between the all within the Manufacturing Team on plant
Procure materials for engineering activities
Take an active part within the sites Performance Management programme
To provide support for the Task Controller role in their absence
Relevant apprenticeship plus a minimum of 3 years hands on experience in a similar role or relevant craft qualification (City & Guilds, NVQ) or HNC in an appropriate technical discipline
Understand HSEQ Standards & requirements and their application, through safe systems of work, to working on a Top Tier COMAH site
An in depth knowledge of the relevant engineering systems, equipment & procedures
A working knowledge of SAP and good computer literacy
Aptitude to develop, follow & continuously improve checklists, procedures and processes
Ability to liaise with technical staff at all levels and across all functional areas
High Standards of work with attention to detail
Effective at planning, scheduling and co-ordinating work
Champion the effective engineering principles
Demonstrate capability to work on their own or within a team for the team
Be a self starter and have a pro-active approach
Effective communication at all levels
Good at problem solving
Be able to think ‘outside of the box&#8217
Potential to progress by demonstrating the values of the Syngenta leadership model, in particular

Mechanical Engineering Technician Resume Examples & Samples

Providing engineering detail/ design drafting capability for the preparation of documentation, 3D models, drawings and product specifications in accordance to Thales Product development process (DDQS)
Assure accuracy of product configuration between data repository (Vault) and Thales Configuration Management System (IPESA)
The preparation of Assembly Drawings, Piece Part Manufacturing Drawings, Parts Lists, Item Master entry forms and other documentation required to support the designs for which the engineering team is responsible
Assisting in the configuration management of documentation
The investigation of problems, propose solutions and as necessary raise and process Engineering Change Requests
Conduct of geometric tolerance analysis on design drawings
Tertiary qualification in Engineering or Technical Drawing or equivalent
Demonstrated experience within the manufacturing, design and development environment
A thorough knowledge of 3D modelling is required, preferably AutoCad Inventor software
An understanding of general Configuration Management Principles

Senior Mechanical Engineering Technician Resume Examples & Samples

Perform experiments and tests associated with a variety of projects as assigned by engineering
Ability to handle and maneuver small components and parts
Work with engineering on build/test fixturing
Understanding of and ability to utilize electronic data collection systems and computer software packages and possibly ability to analyze data using basic statistics
Ability to prioritize work by determining the sequencing and timing of different jobs based on precedence and importance
Willingness for active participation, active listening, interpreting, cooperation and flexibility to allow for a successful self-managed team
Be able to clearly communicate ideas, problems and solutions to engineers
Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments. Maintains positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors
5-7 years of experience with assembly or testing of parts
Requires solid computer skills using Microsoft Office, Proficient using Microsoft Word and Excel
Aptitude for learning and understanding operation and maintenance of equipment system
Knowledge/proficiency with OrCAD, Mentorgraphics PADs, AutoCAD, Solidworks, Creo, Minitab, Labview
Ability to read and understand engineering drawings and specifications
Occasional or Regularly scheduled overtime is a requirement of this position

Senior.mechanical Engineering Technician Resume Examples & Samples

Participate as required within R&D on various engineering efforts for new product development and product characterization
Assist in the generation of documentation (i.e. drawings, specs, procedures, travelers, protocols, reports, data-sheets etc.) required to support product development, equipment and test-method/procedure development and qualification
Troubleshoot and suggest creative solutions to design and testing issues
Coordinate and execute building of prototypes/products per engineering design and instruction as required
Perform assembly and testing of small tubing components by adhesive bonding, or heat reflowing
Follow safety guidelines and utilize appropriate safety devices when performing all tasks that require such precautions
Create and Maintain accurate records to recreate desired build processes, designs and test setups
Performs other related duties and responsibilities, on occasion, as assigned
Two year technical degree preferred or equivalent work experience
Experience with a variety of manufacturing/prototyping processes and lab equipment required
High attention to detail along with an aptitude and ability for fine-motor work
Ability to work in a wet-lab environment and handle basic lab chemicals using the necessary safety protocols
Ability to work within a team and as an individual contributor in a fast-paced, changing environment
Strong verbal and written communications with ability to effectively communicate at multiple levels in the organization