Measurement Technician Resume Samples
4.7
(96 votes) for
Measurement Technician Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the measurement technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
SW
S Weber
Sonny
Weber
99186 Cortney Knolls
San Francisco
CA
+1 (555) 511 0500
99186 Cortney Knolls
San Francisco
CA
Phone
p
+1 (555) 511 0500
Experience
Experience
Los Angeles, CA
Measurement Technician
Los Angeles, CA
Botsford, Ward and Hammes
Los Angeles, CA
Measurement Technician
- Assist in the operation, calibration and troubleshooting of H2S monitors. Assist in locating and tracking H2S within the pipeline system
- Perform other duties as requested by management
- Provide customer support mentality for Measurement Team
- Demonstrate performance toward operational excellence
- Performs the operational inspection planning, including the scope of the inspection, and select test equipment and devices
- Develop and maintain test schedule
- Provide well test gas metering maintenance recommendations and troubleshooting support to Asset Teams and Automation Teams
Chicago, IL
Measurement Technician Body
Chicago, IL
Koss Group
Chicago, IL
Measurement Technician Body
- Knowledge of 3D coordinate systems, robotics, metal processing, and data processing
- Additional information
- Program measuring robots with sensor technology, calibrate new reference and measurement points, replace and maintain measuring components
- Compare planned vs. actual measurement data; initiate production stop if tolerance is exceeded
- Read, analyze, and chart measurement data. Present measurement data in scheduled quality meetings
- Conduct training and briefings for new employees in coordination with the engineering office. Utilize and observe Safety Data Sheets in day-to-day work
- Brief incoming shift of measuring operations, relevant incidents, task lists, and daily information
present
Los Angeles, CA
I&A / Measurement Technician
Los Angeles, CA
Bauch-Sauer
present
Los Angeles, CA
I&A / Measurement Technician
present
- Performs accuracy tests and field calibrations on gas measurement equipment ensuring adherence to Company policies and procedures
- Comes to work promptly and regularly
- Works well with others
- Works well under the stress of deadlines
- Takes direction from supervisors well
- Accurately completes tasks
- Performs installation, maintenance, repair and calibration tasks on Company's gas measurement and control equipment including but not limited to natural gas metering, communications, control, monitoring and SCADA equipment
Education
Education
Bachelor’s Degree in Ownership Within
Bachelor’s Degree in Ownership Within
West Virginia University
Bachelor’s Degree in Ownership Within
Skills
Skills
- Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
- Ability to complete work assignments with minimal supervision in an acceptable time frame
- Ability to perform basic mechanical work associated with natural gas facilities
- Working knowledge of AGA measurement standards and ability to apply gas laws
- Available for shift work when applicable
- Maintains a courteous and professional relationship with third-party customers and outside individuals
- Ability to stay overnight at offshore location to complete work
- Ability to work 14&14 shift at offshore location to complete work
- Ability to navigate Microsoft Word and Excel fluently
- Ability to apply common-sense to carry out simple step by step instructions
15 Measurement Technician resume templates
Read our complete resume writing guides
1
Measurement Technician Resume Examples & Samples
- Makes basic programs for CMM/VCMM and/or electrical equipment to measure/calibrate various parts/equipment. Tests the program to ensure it accurately performs the function
- Reads and utilizes blueprints/electrical schematics and/or technical manuals to setup calibration/ measurement for mechanical and/or electrical equipment
- Fulfills calibration/measurement requests for parts, tool samples, fixtures, etc. Determines what to measure/calibrate
- Tracks and maintains data in database. Input data points and uploads information into Oracle. Performs review of test data collected by less experienced members
- Ensures fixtures/tools are calibrated properly for parts measurement. Measures fixtures to ensure it is within specification. Makes basic adjustments on fixtures/tools to bring within specification if needed
- Maintains and makes basic adjustments to equipment to get it to proper operating conditions. Identifies any issues and assists with the repair estimate process as requested. Contacts/coordinates service technicians to repair equipment as needed
- Fulfills calibration/measurement requests for parts, tool samples, etc. Follows calibration schedule to ensure equipment stays within specification. May calibrate equipment following appropriate documentation. Troubleshoots minor issues on measurement equipment. Identifies issues and elevates to appropriate personnel
- Conducts research and/or communicates with OEM technical support to clarify specifications, settings, and applications for new equipment
- Any combination of education and experience equivalent to an Associate’s degree and 2-5 years measurement, calibration, or quality experience
- Must be able to program Electrical equipment and/or Coordinate Measurement Machine (CMM)
- Must be able to read blueprints and/or electrical schematics/diagrams
- Must be able to use precision mechanical and/or electrical tools and understand the readings from digital or analog tool displays
- Knowledge in Microsoft Office. Experience with Oracle a plus
- This position is for second shift (3:30 PM - 12:00AM)
2
Measurement Technician Resume Examples & Samples
- Perform all work in compliance with Company standards, procedures, and regulatory and tariff requirements
- Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)
- Must respond to, and address, callouts and emergencies after regular business hours including after dark hours, which may require carrying a communication device
- Knowledge with electronic test instruments
- Knowledge of mechanical, pneumatic, and electronic equipment used in gas and liquid product measurement and control
- Ability to effectively organize, plan, prioritize, document, and complete work with minimum supervision
- Ability to speak and understand English
3
Measurement Technician Resume Examples & Samples
- Calibrate, maintains and operate EGM/ EFM devices
- Install EFM and telemetry
- Maintain and operate custody and operational gas and liquid meters in accordance to industry and BLM standards, orifice, ultrasonic, coriolis, rotary, V-cone, turbine, etc
- Installs and calibrates electronic transducers
- Operate portable gas chromatographs (if applicable)
- Pulls spot samples, gas, and liquids
- Operate/maintain automatic gas samplers
- Perform settlement testing by conducting or witnessing test
- Removes/installs orifice plates
- Develop and maintain test schedule
- Collect Electronic Gas Flow/measurement data (EGM/EFM)
- Operate appropriate PC software
- Connect and disconnect meters
- Perform functions independently in area of responsibility
- Operate and inspect meter runs
- Calibrate, maintain, and operate on-line gas and liquid chromatographs
- Calibrate, operate and maintain product quality devices O2, H2S, H2O, etc
- Install, maintain, and operate spread spectrum or licensed radios
- One to five years gas & liquid measurement experience is preferred
- Licensed and unlicensed radio experience
- Primary chromatography theory and operational experience
4
Measurement Technician Resume Examples & Samples
- Install, inspect, test, adjust, maintain, operate, troubleshoot, repair, calibrate, measurement equipment
- Monitor liquid product volumes through the measurement system, insure all corrections are applied
- Assess all facets of assigned facilities to insure accurate measurement
- Responsible for the general upkeep and maintenance of all measurement facilities and equipment as needed
- Job level commensurate with experience and skill set
- Knowledge and experience in safe handling practices of flammable liquids and high pressure systems
- General knowledge of API measurement standards
5
Measurement Technician Resume Examples & Samples
- Detect measurement error, correct volumes as needed and provide supporting documentation
- Familiarity with mechanical, pneumatic, and electronic equipment used in gas and liquid product measurement and control
- Familiarity with AGA, API, and GPA measurement standards
- Must respond to, and address, call outs and emergencies during and after regular business hours including after dark hours, which require carrying a communication device
- Depending on location and workload, travel will be required
- Job level commensurate with experience and skill sets
- Experience in gas measurement and control with mechanical, pneumatic and electronic equipment
- Working knowledge of AGA measurement standards and ability to apply gas laws
- Intermediate computer skills including experience with spreadsheets and data trending
- Ability to efficiently plan, construct, and draft as built prints for small metering equipment installations
6
Measurement Technician Resume Examples & Samples
- Maintain and operate custody and operational gas and liquid meters in accordance to industry and BLM standards, orifice, ultrasonic, Coriolis, rotary, V-cone, turbine, etc
- Installs/calibrates electronic transducers
- Pulls spot samples, gas and liquids
- Basic chromatograph theory and operational experience
7
Measurement Technician Resume Examples & Samples
- Calibration and maintenance of electronic gas flow measurement devices
- Schedule, conduct, report and perform gas calibration and sampling tests
- Perform calculations for optimal orifice plate sizes
- Ability to respond to call out requests and work irregular hours as needed for maintenance or emergency situations
- Witness gas calibrations and gas analysis
8
Power Control Measurement Technician Resume Examples & Samples
- Responsible for maintenance in their allotted area
- Responsible completing weekly work plan
- IE equipment is maintained to Site standards of safety, reliability and availability
- Know and meet HSE requirements of the position
- In accordance with the maintenance schedule and plan provided, conduct ongoing maintenance on existing refinery and power distribution equipment and provide necessary assistance for project and commissioning work
- Ensure that all PCM maintenance is conducted in accordance with the PCM maintenance plan and priorities defined
- Ensure that all PCM maintenance is conducted in accordance with agreed PCM maintenance methods and procedures
- Ensure that all PCM maintenance is conducted in accordance with the relevant BP and statutory standards, including all site instrument calibrations
- Ensure that equipment history is reviewed prior to commencement of maintenance work and is updated after any maintenance work completion
- Ensure that all Trip checking on emergency shutdown systems is carried out and documentation is maintained
- Ensure that cause failure analysis is carried out on all PCM maintenance activities in order to ensure that the cause is remedied
- Refer any PCM maintenance concerns to the Supervisor and/or Equipment Support Team for further action
- Actively contribute to continuous improvement processes
- Proactively identify errors in equipment, systems and procedures and take appropriate action in order to minimise mean time between failures and maximise plant availability
- Fully utilize new tools and equipment when carrying out PCM maintenance activities
- Identify opportunities for equipment performance or reliability improvement by either equipment, work, method or facility changes
- Provide ongoing feedback to the Supervisor and/or the Equipment Support Team in terms of regularly occurring PCM maintenance issues
- Assist the Equipment Support Team in the development of Instrumental/Electrical documentation for refinery including drawings, procedure and records
- Identify any concerns about the plant and equipment and take appropriate action
- Report any damage to PCM equipment in order to ensure that repairs are conducted
- Carry out minor maintenance on any faulty tooling
- Ensure that PCM maintenance equipment is generally maintained to an acceptable standard so that accuracy of work is maintained
- Ensure that all plant and equipment is maintained to defined standards
- Organise and plan allocated work to be executed efficiently
- Co-ordinate and arrange any other services required in order to facilitate efficient performance of work plan
- Liaise with the Planner/ Schedulers as required to keep plans up to date
- Trade Certificate in Instrument/Electrical Fitting
- A current WA Electrician Licence
- Experience with On-stream process analysers
- Experience with Distributed Control Systems, preferably Honeywell
- Hazardous Area Experience, eg. Flameproof equipment
- Ability to interpret standards and drawings
- Competent in the use of Computerised Maintenance Management Systems (CMMS)
- Job planning and organization knowledge
- Experience with power distribution systems
- Experience within a refinery in a similar role
9
Measurement Technician Resume Examples & Samples
- Provide Measurement support for all gas custody transfer points delivering/receiving gas to/from third party gathering
- Provide gas measurement support for all allocation/well test and operational gas metering
- Schedule gas meter calibration and witnessing activities in accordance with Oxy measurement policy – Use CMMS for data collection
- Maintain less than 5% M-1000 rate on calibration/witnessing
- Document 100% of meter testing
- Gather data to support resolution/correction of all ticketing errors and support Measurement Team lead in negotiation
- SME for Gas Sales points and equipment
- Present data to Asset Team and implement upgrades if approved
- Communicate all maintenance activities with Asset Team
- Provide customer support mentality for Measurement Team
- Coordinate measurement testing activities with vendors and third party transportation companies as required
- Perform sampling as required by OP measurement standards or as requested
10
Measurement Technician, Level Resume Examples & Samples
- Install, inspect, test, adjust, maintain, operate, troubleshoot, repair, calibrate, and remove advanced measurement, control and regulation equipment, and gas quality equipment
- Monitor gas and liquid product volumes through the measurement system, insure all corrections are applied and proper qualities are applied
- Interpret and apply electrical and electronic schematics pertaining to EFM and measurement electronics
- Assess all facets of assigned facilities to insure accurate measurement and maintaining the company lost and unaccounted for gas and product with a high degree of ownership within the established corporate goals
- Identify, report and correct safety and environmental concerns
- Working knowledge of the National Electric Codes
- Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems
- Knowledge of gas and liquid chromatography
- Adequate analytical and troubleshooting skills
- Ability to work with a team, take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules
- Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
11
Measurement Technician Resume Examples & Samples
- Responsible for implementing and maintaining all phases of mechanical, pneumatic and electronic measurement, and measurement control equipment including the installation, operation and maintenance of all gas pipeline related facilities
- Participate in the development of O&M Procedures, Site Specific Procedures, project scopes and work plans
- Perform all work in compliance with Company Standards, procedures, regulatory and tariff requirements
- Train and oversee company and third party personnel as required (i.e. personnel in progression, contractors, visitors, etc.)
- Experience with mechanical, pneumatic and electronic equipment used in gas measurement and control
- Knowledge of gas chromatography, both theory and application
- Working knowledge of various components of measurement error
- Working knowledge of revenue streams associated with meter stations within area of responsibility
- General knowledge of regulators and relief valves found on project lines and main lines and general meter sets
- Job planning and prioritizing. Knowledge and experience in safe handling practices of flammable gases, liquids and high pressure systems
- Knowledge of company policies and practices, and regulatory and tariff desirable
- Intermediate computer skills (knowledge of MS Office, operating systems, company software)
- Working knowledge of National Electric Codes
- Ability to work from written and verbal instructions
- Ability to work with a team, take direction from supervisors, keep required job schedules focus attention on details, and follow work rules
12
Measurement Technician Resume Examples & Samples
- Familiarity with AGA, API, and GPA measurement standards Certifications, licenses, registrations
- Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers
- May be required to possess a commercial driver’s license, drive a company commercial vehicle and comply with all commercial vehicle regulations
- May be required to achieve and maintain certifications as required to perform job duties and applicable to the job classification
- Completion of any site specific technical training may be applicable Competencies, skills, and abilities
13
Measurement Technician Resume Examples & Samples
- Schedule and witness monthly proving of all MOC gas meters, and 3rd party inspections
- Ensure thoroughness and integrity of all measurement documentation and file appropriately
- Work with Measurement lead technician to ensure collection, accuracy, and integrity of Mid/End of the month run tickets and closing volumes
- Witness 3rd party and Marathon Oil custody transfer meters in accordance with MCAT MPSSP and/or contractual agreement
- Work with operations and SCADA to ensure all measurement and communication issues are resolved effectively and efficiently
- Maintain measurement calibration equipment and ensure it functions properly
- Work with field data group to resolve missing data issues
- Proficiently complete duties assigned by Measurement Department Supervisor and Measurement Lead Technician
- Minimum of 2 years liquid measurement experience with knowledge in instrumentation and electronics (PLC, ROC, ABB, etc.)
- Familiarity with API petroleum measurement standards
- Knowledge of LACT operation, design, and proving procedure
- Knowledge of Orifice, Coriolis, Turbine, and Vortex meters
- Knowledge of electronic test equipment
- Intermediate computer skills and ability to successfully use MS Office and measurement related software
- Working knowledge of gas and liquid sampling systems
- Commitment to Marathon’s Health, Environment, and Safety culture
14
Measurement Technician Resume Examples & Samples
- Learn and understand Targa’s Safety Policies and Procedures and Business Ethics Policies.Plan and perform all assignments in a safe manner by utilizing the proper tools, safety and environmental precautions, permitting, and process, and have working knowledge of the effect these tasks will have on co-workers and the overall facility
- Learn to fill out applicable work/hot work permits, lockout/tagout documentation
- Assist other Measurement Technicians or Supervisor with measurement or other tasks as directed
- Organize and maintain records as required
- Use Maximo to document measurement activities
- Have a working knowledge of natural gas and natural gas characteristics including gas & liquid measurement
- Perform calibrations, gas sampling, troubleshooting, repair and installation of liquid / gas flow measurement equipment
- Able to calibrate and trouble-shoot Total Flow & OMNI flow computers, chromatographs and moisture analyzers
- Troubleshoot and maintain measurement communication systems
- Practice good safe housekeeping
- Assist in training new hires or other technicians as required
- Actively participate in all safety meetings and safety functions
- Create and edit measurement volume statements
- Must be able to perform functions as outlined on essential job duties for a measurement technician
- Strong verbal and interpersonal skills that help establish a supportive climate with others
- Must be proficient in the use of all Microsoft Office software modules, including Word, Excel, PowerPoint and others
- Must work with a minimum of supervision and be able to manage their time when given multiple tasks
- Minimum of 3 years of work of work related experience
- Must be willing to work call-outs, weekends, holidays and overtime as deemed necessary by business needs
- High level computer skills with some ability to do simple programming
- 5 years in gas processing industry
- Ability to track line item budget tasks
- Experience using a CMMS sytem such as Maximo
15
Measurement Technician Resume Examples & Samples
- Assist other Measurement Technicians or Supervisor with routine measurement functions
- Perform scheduled calibrations, gas sampling, troubleshooting, repair and installation of Electronic Flow Measurement equipment, specifically Totalflow
- Witness and verify third party meter calibrations
- Assist in the operation, calibration and troubleshooting of H2S monitors. Assist in locating and tracking H2S within the pipeline system
- Actively participate in all safety meetings and safety functions. A Measurement Tech I is responsible for his/her safety and of any person he/she may be working with
- Must be able to perform functions as outline on Essential Job Duties for a Measurement Technician I
- Minimum High School Diploma or Equivalent
- Working knowledge of natural gas gathering and processing
16
Measurement Technician Resume Examples & Samples
- Install and maintain field SCADA system equipment including Electronic Pressure Recorders and related devices and components
- Install and maintain pressure control equipment at Regulator Stations including related devices and components
- Install and maintain natural gas heaters at pipeline facilities including related devices and components
- Inspect and maintain valves at Regulator Stations including related devices and components
- Inspect, and maintain communication circuits, modems, radio and wireless devices
- Coordinate and perform measurement tests with other gas suppliers (third-party) to ensure measurement integrity and accuracy
- Inspect, test, calibrate and maintain ultrasonic and orifice meters and flow measurement devices
- Support Engineering department and Resource Centers on pipeline construction routines and emergency response
- Support the control interface with the respective Gas Control center ensuring effective remote operation of integrated control/measurement systems
- Execute scheduled gas measurement equipment inspections, tests, calibrations and maintenance
- Install and maintain automation and control equipment at the combustion turbine (CT) power generation plants on the system
- Ensure accuracy of AMR devices on large volume meters and correctors
- Inspect, test, and maintain remote operated valves at pipeline facilities including related devices and components
- Support the company’s Odorization requirements by taking and entering system odorant readings and installing, maintaining and operating odorization equipment
- Coordinate and work with the resource centers to set electronic correctors on Group III meters
- Ensure completion of large volume meter test program on electronic correcting devices in accordance with local state requirements
- 2 years technical school education and/or Associates degree or equivalent job related experience
- Minimum six months training or experience in electronics and/or mechanical systems with demonstrated experience in installation, diagnostics, and troubleshooting of electronic and mechanical systems and equipment
- Demonstrated mechanical and mathematical aptitude
- Demonstrated effective communication (verbal and written), interpersonal and time management skills
- Demonstrated safety awareness
- Post high school degree
- Related vocational training
- Previous experience in natural gas operations
- Training and/or experience in natural gas measurement
17
XTO Measurement Technician Resume Examples & Samples
- Must have a solid understanding of AGA and API Measurement Standards
- Understand power consumption and how to properly size solar charging systems
- Basic knowledge of electrical wiring and grounding
- Experience using ROClink800, PCCU32 and Freewave Tool Suite software
- Capable of working with FloBoss 107, FloBoss 103, FloBoss 407, FloBoss 800’s, XFC6413, 6413, 6213 and XFCG4 flow computers
18
XTO Measurement Technician Resume Examples & Samples
- 3 plus years of recent field related measurement and automation experience is preferred
- Fully support and comply with the XTO Safety Culture as a high priority
- Advanced troubleshooting capabilties and strong operational knowledge of Fisher ROC equipment, Rosemount wireless networks, Rosemount transmitters, thermal electric generators, burner management systems and Freewave radio networks
- Basic understanding of all components related to natural gas/liquid measurement equipment (Orifice, Coriolis, Ultra Sonic and Turbine meters) and how they are specified, certified, installed, operated and maintained
- Basic understanding of AGA & API standards pertaining to volumetric and mass measurement of natural gas and natural gas liquids
- Excellent verbal and written communication skills,
- Proficient computer skills to include Microsoft Office Suite of products
- Must be physically able to use stairs on a regular basis without complication
- Must be physically able to lift up to 55 pounds
19
Measurement Technician Resume Examples & Samples
- Ability to prioritize tasks to stay on assigned, regulatory, tariff and contractual schedule
- The ability to work from written and verbal instructions
- Must be proficient in computer software applications including Microsoft Office (Word, Excel, Windows 7, and 10) and be able to manipulate large spreadsheets and databases
- Ability to actively support the region’s safety program
- Ability to troubleshoot pneumatic, electronic and electrical equipment and controls
- Ability to perform basic mechanical work associated with natural gas facilities
- Required to maneuver up to 100 pound products with the assistance of safety devices such as bottle carts or hand carts
- Required to work outside in all weather conditions
- Must possess and maintain a valid driver’s license and have a driving record acceptable to company standards
- Maintain a regular, dependable attendance and high level of performance
- Must be able to work with a team, take direction from supervisor(s), adhere to required work schedules, focus attention on details and follow work rules, as well as, take on additional job responsibilities as needed
- Must be available for and provide emergency response after regular business hours which may require carrying a personal communication device
- Travel is required and anticipated inside and outside of the assigned area
- Candidates with experience in a related field or discipline who do not possess the above requirements will be considered. The successful candidate will be provided on-the-job training and must pass progressive testing over 12-18 month periods from a level 1 technician to a level 4 technician. Candidates with higher levels of skill and experience may be brought on at a level 2 or higher
- Experience with flow computers, transmitters, chromatographs, gas quality analyzers, SCADA equipment, electronic and pneumatic controllers, regulators, water bath indirect heaters, regulators and all metering listed above
- Knowledge of AGA, API and GPA standards
- Knowledge of National Electrical Code philosophies and installation requirements
- Experience with computer interface software, networking and data file management
- Knowledge of the tariffs and specified operating agreements for natural gas measurement facilities
- Experience with Maximo work order tracking is a plus
20
Measurement Technician Resume Examples & Samples
- Perform all work in compliance with Company standards, procedures, regulatory and tariff requirements
- Overtime and limited overnight travel will be expected as required by the position
- Intermediate computer skills of MS Office, operating systems, company software
- Intermediate math skills (addition, subtraction, multiplication, division, fractions, decimals)
- Familiarity with mechanical, pneumatic, and electronic equipment used in gas product measurement and control
- Ability to estimate installation, operating and maintenance expenses associated with measurement systems
- Ability to effectively organize, plan, prioritize, document, and complete work with minimal supervision
- The successful candidate will be required to clear a drug screen and a complete background check, after an offer has been extended and prior to being employed.
- Knowledge of CFR 49 Part 192 and experience with DOT inspections
21
Measurement Technician Resume Examples & Samples
- Ability to drive results and lead the capital program
- TestIt implementation
- Develop and implement check meter calibration programs as needed and perform calibrations per schedule
- Develop and implement sales meter calibration witnessing programs as needed and witness meter calibrations per schedule
- Maintain and monitor LACT sales, Sample Pots and SCADA equipment related to measurement
- Provide SCADA support
- Provide I&E support measurement equipment
- Program and trouble shoot vortex and turbine meters
- Trouble shoot EFM meters
- Obtain necessary samples and maintain associated sampling or analysis equipment
- Accountable for the day-to-day installation, maintenance and repair of measurement equipment
- Regularly review orifice meter plate sizes and make changes as required
- Review and resolution of system balances
22
Measurement Technician Resume Examples & Samples
- 3-5 years gas measurement experience with working knowledge of gas/oil production equipment with a responsible attitude for personal safety and the safety of co-workers, contractors and the public
- Working knowledge of gas sales meters and test equipment
- Ability to troubleshoot mechanical problems, solve minor mechanical problems, and perform root cause failure analysis
- Knowledge of or familiarity with AGA/GPA Gas Measurement Guidelines, BLM and COGCC Regulatory requirements
- Competent in Microsoft PC programs and willingness to learn or have competence with CRC applications
- Must be able to work overtime, respond to call-put situations, and work weekends when needed
23
Measurement Technician Resume Examples & Samples
- Test, calibrate, operate, maintain, and inspect electronic and mechanical flow meters and obtain oil and gas samples
- Witness testing and calibration of 3rd party meters
- Complete applicable reporting and documentation of key operating parameters
- Maintain meter proving reports
- Attend annual water draws for third party proving equipment
- Close and balance monthly production volumes
- Set and maintain third party LACT proving schedule
- Approve construction flow testing of all new measurement equipment
- Adhere to written operating procedures for shutdown and startup of equipment
- Adhere to all safety policies and practices
- Actively participate in various elements of process safety
- Complete allocation meter proving quarterly
- Communicate and interface with measurement, production, and third party operators when required
- Ability to manage conflicting priorities while meeting work deadlines
- Oil and Gas industry experience is a plus
- Knowledge of safety requirements and practices
- Capable of physical duties in outdoor environment
- Ability to navigate to designated locations
- Ability to work with and understand the safety requirements with high pressures and H2S gas
- Strong computer skills, particularly with Microsoft Excel and Outlook
- Knowledge of SAP is helpful
24
Measurement Technician Resume Examples & Samples
- Learn and understand Targa’s Safety Policies and Procedures and Business Ethics Policies. Plan and perform all assignments in a safe manner by utilizing the proper tools, safety and environmental precautions, permitting, and process, and have working knowledge of the effect these tasks will have on co-workers and the overall facility
- Interpersonal communication skills are required in order to interface with all affected teams, personnel, and vendors; able to work in a self-directed work team
- Working knowledge of functionality of Gas and Liquid measurement / equipment
25
Measurement Technician Body Resume Examples & Samples
- Use measurement machinery to conduct pre-assembly vehicle geometry testing, determine measuring parameters for differing production runs, and interpret measurement data
- Program measuring robots with sensor technology, calibrate new reference and measurement points, replace and maintain measuring components
- Compare planned vs. actual measurement data; initiate production stop if tolerance is exceeded
- Brief incoming shift of measuring operations, relevant incidents, task lists, and daily information
- High School Diploma or GED and a minimum of 5 years of relevant measuring experience or associate’s Degree in a technical trade (industrial technology, mechatronics, etc.) and 2 years relevant measuring experience
- Knowledge of 3D coordinate systems, robotics, metal processing, and data processing
26
Measurement Technician Resume Examples & Samples
- Ensure all meter proving/calibration and sampling schedules are completed as assigned
- Witness monthly custody transfer meters, perform shakeouts and sampling, and 3rd party inspections in accordance with the EFPO MPSSP and/or contractual agreement
- Accountable for the daily operation, maintenance, troubleshooting, and inspection of all meters
- Ensure thoroughness and integrity of all measurement documentation
- Ensure site security and sealing procedures are properly completed and documented on all LACT units in assigned area
- Verify and commission new meter install configurations prior to first flow
- Responsible for ensuring all custody meters and allocation meters are proved upon initial startup
- Investigate and resolve system imbalances
- Maintain measurement equipment and ensure it functions properly
- Work with the Measurement Supervisor and field data group to resolve missing data issues
- Work with contract personnel in assigned area to ensure all measurement duties are completed as scheduled
- Proficiently complete duties assigned by Measurement Supervisor
- Minimum of 2 years gas or liquid measurement experience with knowledge in instrumentation and electronics (PLC, ROC, ABB, etc.)
- Familiarity with API and/or AGA petroleum measurement standards
- Knowledge of measurement equipment operation, design, and proving procedure
- Working knowledge of liquid sampling systems
- Must be able to lift 100 lbs
27
Measurement Technician Lead Resume Examples & Samples
- Provide support for measurement system applications including but not limited to
- Experience in the use of measurement software applications, such as FlowCal
- Knowledge of plant processing and extraction facilities and physical properties of natural gas
- Experience analyzing and resolving problems with gas measurement system applications
- Working knowledge of data acquisition systems used to poll secondary measurement devices
- Application of math and algebraic formulas used in spreadsheet applications
28
XTO Measurement Technician Resume Examples & Samples
- Minimum of 5 years of industry experience preferred
- Basic understanding of Gas Chromatographs and measurement standards (aga 3,8)
- Experience installing and maintaining Fisher ROC's and Total Flow gas measurement equipment and WinCCU software preferred
- Good computer skills with ability to use the Microsoft Office suite of programs, as well as pertinent industry programs
- Able to work in a team setting
29
Measurement Technician Resume Examples & Samples
- Ensures all operations under assignment conform to both State and Federal regulations (i.e. DOT, OSHA, and BLM)
- Measures and grades crude oil receipts and deliveries by truck to LACT and refinery
- Balances volumes between load and delivery point in compliance with policies and procedures governing operations and measurement
- Ensures all measurement devices are operating
- Assists in quality control checks ensuring integrity and accurate measurement at point of purchase
- Liaises with pipeline to ensure the best movement of crude
- Assists with design and set up of new delivery locations
- Coordinates with all drivers and management to ensure all aspects of the assigned division flow smoothly
- Tracks , troubleshoots, and maintains all truck LACTs
- Creates daily reports as required to ensure operations are being performed cost effectively and efficiently
30
Measurement Technician Resume Examples & Samples
- SAFE OPERATIONS – Maintain the safe, reliable and efficient day to day operation of the Williams’ South Texas equipment and assets
- Utilize electronic tools such as OMS and Maximo to ensure the base line maintenance, reoccurring maintenance, and condition based maintenance practices are consistently executed
- Troubleshoot, operate, and maintain equipment such as: EFM/RTU Flow Computers, Ultrasonic Meters, Orifice Meters, Flow Control Valves, Gas Detection, Gas Chromatographs, Moisture Analyzers, H2S Analyzers, Radios, Turbines, Pumps, Engines, Compressors, Etc.
- Willingness and the availability to travel to various locations located at various points on about 350 miles of pipeline AND take emergency call out situations for area of responsibility
- Ability to communicate effectively with customers, Pipeline Control and Operations
- Possess a high school diploma or equivalent
- Demonstrate atleast two (2) years of experience working with measurement and gas quality analysis
- Worked in Pipeline Operations and/or Gas Compression processes
- Experience with low and medium voltage equipment and systems
- Be willing to travel long distances to remote areas of on the pipeline system
- Be willing to reside in an area such that facilities can be serviced from Inez, Texas to Tilden, Texas to Falfurrias, Texas
- Collaborative, pro-active team player capable of working effectively between functional disciplines
- Ability to work independently and travel (up to 25%) when required. Most travel will be day-trips
- Posses excellent verbal and written communication skills
- Have basic to intermediate knowledge level of Microsoft Office Applications (Word, Excel, Outlook, etc..) and PC skills
- Previously utilized DCS, PLC, HMI, Wonderware, EFM, PIDs, and Loop Tuning
- Understand SCADA and real-time historians
- Must be able to walk, bend, crawl, work in extreme heat, extreme cold, high noise, and enclosed spaces, while climbing ladders, and lifting items that weigh more than 45lbs
- Possess a two-year technical degree in Process Technology and/or electronic instrumentation. **Related work experience will be considered**
- This position will be filled at a level commensurate with skills and experience**
31
Senior Measurement Technician Resume Examples & Samples
- Pulls Gas samples at central delivery points (CDPs)
- Drives Right-of-ways to observe for pipeline damage/leaks
- Performs metering maintenance
- Performs general maintenance of equipment
- Interacts with landowners and production personnel
- Communicates effectively throughout all levels of the organization
- Valid Driver's License (NON CDL)
32
Sxl-measurement Technician Resume Examples & Samples
- This position will be required to calibrate existing meters to determine meter factors using provers (fixed or portable), or master meters on an established proving schedule or as directed
- Coordinates work with MHIC and pipeline scheduling and control center departments to ensure that provings are done at meaningful flow rates
- Establishes a daily work schedule with a starting and quitting time(s) that reflect the times at which the movements are being made through the meters and throughout various MHIC facilities to maintain a forty (40) hour work week consistent with delivery schedules, minimizing or eliminating idle time and overtime
- As required, calculates meter correction factors from calibration data and inputs information into Flow Computers, PFIS, Synthesis, FlowCal or similar system, as required, for the generation of accurate billing of shippers
- Installs, tests, inspects, troubleshoots, maintains and repairs pipeline measurement systems. This includes but is not limited to: fixed and portable provers, meters, straightening vanes, strainers, samplers, and meter output devices such as preamps, flow computers and combinators. This work may be done by the Measurement Technician or with his/her assistance as required by the situation
- Utilizes maintenance management software, (SAP) for the assignment and completion of maintenance and repair activities. Provides necessary information for filed measurement equipment for inclusion into SAP
- Evaluates new meters for accuracy and to verify original manufacture's specifications before committing to service. Checks temperature and pressure indicating devices associated with measurement systems as needed and Monthly
- Works under the direction of the Measurement Manager to evaluate the cause of over and shorts of the line segments as well as the assigned facilities, and perform first of the month reviews
- Witnesses calibration of proving facilities and meter systems of other connecting pipeline companies and arranges for outside company representatives to witness SPL/SPMT calibrations. Schedules and works with outside specialists for the water draw calibration of fixed prover loops and portable provers
- Assists as required in witnessing calibration and adjustment of loading rack and dock meters
- Works with the MHIC or pipeline Technical Supervisors and Measurement Manager to ensure that adequate spare parts, repair materials, meters and totalizers are maintained. Orders parts and repair materials as required
- Provides regular verbal and written reports regarding the status of work and assists in the planning of both individual jobs and broad based maintenance programs. Reviews major and time consuming repairs with appropriate supervision
- Uses and operates all pertinent PPE and safety equipment when performing duties in potentially hazardous areas. (Respirator, hard hat, approved safety shoes and safety glasses, etc.) Displays workmanship consistent with industry standards and company work practices. Works in accordance with all applicable codes and/or as indicated on engineering drawings and sketches
- Makes recommendations to engineering regarding changes in equipment based on field inspections or work experience. Uses various test equipment, measuring devices, hand and power tools, machinist tools and gauges
- Interprets and works from drawings, plans and specifications relevant to the construction or alternation of measurement equipment or piping systems. Maintains current files of company, vendor drawings and specifications. Prepares as-built and sketches from which permanent engineering drawings can be prepared
- The incumbent normally works alone but at times is required to coordinate their work activities with other technicians to make repairs to measurement equipment. May be required to inspect or oversee the work of others, either contract employees or Sun employees in the installation, calibration or maintenance of measurement equipment
- As assigned, assists technicians in other disciplines with routine maintenance, repair and installation. In absence of appropriate craftsman may be required to diagnose problems other than measurement in nature and perform minor repairs, informing appropriate supervision
- An Associate’s degree
33
Sxl-measurement Technician Resume Examples & Samples
- Occasionally this position will be required to calibrate existing meters to determine meter factors using provers (fixed or portable), or master meters on an established proving schedule or as directed
- Coordinates work with scheduling and control center departments to ensure that provings are done at meaningful flow rates
- Establishes a daily work schedule with a starting and quitting time(s) that reflect the times at which the deliveries are being made through the meters and into the terminals or take-off points to maintain a forty (40) hour work week consistent with delivery schedules, minimizing or eliminating idle time and overtime
- As required, calculates meter correction factors from calibration data and inputs information into PFIS, Synthesis, or similar system for the generation of accurate billing of shippers
- Works under the direction of the Measurement Manager to evaluate the cause of line segment over and shorts and perform first of the month reviews
- Witnesses calibration of proving facilities and meter systems of other pipeline companies and arranges for outside company representatives to witness SPL calibrations. Schedules and works with outside specialists for the water draw calibration of fixed prover loops and portable provers
- Assists as required in witnessing calibration and adjustment of loading rack meters
- Works with the Field Technical Supervisor and Measurement Manager to ensure that adequate spare parts, repair materials, meters and totalizers are maintained. Orders parts and repair materials as required
34
Measurement Technician Resume Examples & Samples
- Completes assignments according to work requests, on-time, with high quality
- Able to collaborate with others outside the work group and work effectively in a team environment
- Associate degree in an automotive field, or ASE/State Master Mechanic Certification preferred. Equivalent military or job experience in the given field may be considered
- 3+ years’ experience in a job related area
- Demonstrate ability to work multiple projects and assignments with high level of autonomy and accountability for results
- Able to travel for extended periods to offsite locations
- High G, Limit Handling training or equivalent
35
Measurement Technician Resume Examples & Samples
- Basic knowledge of field measurement
- 0-3 years of related work experience
- Regular and reliable attendance
- Minimum of 1 year measurement experience or 5 years experience in oil and gas industry
- Understand gas quality determination, calculations, specifications and limits
- Understand and use LEL, H2S and O2 detectors
36
Measurement Technician Resume Examples & Samples
- Perform various mathematical calculations associated with job duties to ensure accurate quality and quantity
- Must be a team player and work with others
- 2 years of oilfield pipeline/station measurement experience is preferred
- Preferred experience with (L) ACT meter operations and station equipment, and meters calibration
- Preferred experience with crude oil analyzing equipment
- Preferred experience with (L) ACT unit design and operations
- Preferred experience with flow computers, Coriolis Meters, and displacement meters
37
Field Measurement Technician Resume Examples & Samples
- Test and calibrate large volume meters and instruments
- Conduct annual Town Border Station inspections
- Conduct annual District Regulator Stations inspections
- Witness testing of metering stations
- Test and calibrate gauges
- Size meters, relief valves and regulators for all types of applications
- Inspect and test new large volume meter sets
- Make recommendation to regions on what equipment needs upgraded or repaired for safety, code compliance or improved measurement
- Install or trouble-shooting telemetry with support from other field operations
- Give technical support including diagnosing problems, training, etc
- Perform other assigned tasks as required
- Up to 4 years’ experience
- Knowledge of meter and regulator operation beneficial
- Working knowledge of mainframe environment and applicable software
- PC knowledge and applicable software beneficial
- Ability to effectively communicate and cooperate with coworkers
- Writing skills necessary to prepare proper paperwork
- Analytical and reasoning skills
- Highly organized, flexible
38
Measurement Technician Resume Examples & Samples
- Install maintain and calibrate turbine, Coriolis, ultrasonic, and orifice meters
- Install, maintain and calibrate densitometers
- Install, maintain and operate provers
- Install, maintenance and calibration of pressure, temperature and other transmitters
- Resolve measurement issues including accounting for unaccounted for product
- Recognize malfunctions in individual equipment components and perform maintenance as necessary
- Ability to monitor and analyze measurement data and the ability to react to this data
- Interface with measurement control system
- Installation, and maintenance of various flow computers
- Interpersonal skills required to interface with customers and all other crafts
- Must be proficient in the use of personal computers and associated software
- Maintaining clean and safe working environment
- Making any or all repairs as deemed reasonable and safe
- Maintaining scheduled preventative maintenance programs on instrumentation and electrical equipment
- Maintaining accurate records shutdown and safety checks
- Maintaining all required documentation for process safety management
- Maintaining the company vehicle at all times to ensure safety and equipment that he will operate
- Maintaining tools and equipment issued
- Work weekends, overtime and take call on an as needed basis
- Ordering software, electrical & Instrument parts as needed
- Valid High school diploma or GED
- Ability to work overtime, weekends, holidays, and able to respond to call outs to meet business needs
- Must have strong interpersonal skills in order to interact with internal and external customers
- Must pay close attention to detail to provide accurate information in a timely manner
- Ability to remain focused when facing distractions and quickly analyze data to take the appropriate actions
- Must commit and follow through on work to assure tasks are completed
- Must be able to interface with personal computers, business applications, and have a working knowledge of common office programs (MS Word, Excel)
- Ability to prioritize work and handle multiple tasks while still meeting deadlines
- Must be able to adapt and learn new technology and work processes
- Ability to work in an open office environment
- Must be able to operate common office equipment including fax machines, phones, copiers, and scanners
- Must be able to travel occasionally to attend meetings or assist other local sites
- Must be a self-starter with ability to work with peers in collaborative efforts
- Ability to work in constant weather changes including inclement weather
- Two year associates degree in instrumentation or equivalent training
- Five years experience in petrochemical industry
- Two years plus working with petroleum measurement
- Experience working in a team environment, self-starter, and ability to work with peers in collaborative efforts
- Ability to work overtime, weekends, holidays, and able to respond to call outs as business needs demand
- Familiarity working with software including WonderWare and Excel
- Self-motivated with the ability to work with minimal supervision
- Ability to coordinate, prioritize and execute multiple tasks at once
39
I&A / Measurement Technician Resume Examples & Samples
- Comes to work promptly and regularly
- Takes direction from supervisors well
- Works well under the stress of deadlines
- Concentrates well on tasks
- Accurately completes tasks
- Performs installation, maintenance, repair and calibration tasks on Company's gas measurement and control equipment including but not limited to natural gas metering, communications, control, monitoring and SCADA equipment
- Performs accuracy tests and field calibrations on gas measurement equipment ensuring adherence to Company policies and procedures
- Maintains inventory of measurement supplies and equipment
- This role includes safely driving to field location and sites, and the ability to safely operate a vehicle is essential to the role
- Performs other tasks that may be assigned
- Maintain/Operate EGM/EFM devices (TotalFlow, Fisher ROC, Daniel Ultrasonic)
- Install EFM
- Install Telemetry (Viper Radios, 900 MHz Freewave)
- Install/Calibrate Electronic transducers
- Operate Portable Gas Chromatographs (if applicable)
- Operate and Maintain Liquid Metering (if applicable) (TruFlo, turbine meters)
- Update and maintain electronic measurement database and provide reports as requested (may include programming, set up of access databases, spreadsheets, etc.) (FlowCal Balance reports, TestIt, Beta Reports, etc.)
- Operate and Maintain Analytical equipment
- Operate and Maintain ultrasonic meters
- Strong Computer skills, including Microsoft Office Suite (Word, Excel, MS Outlook)
- Ability to work independently, proactive identifying deficiencies, recommending design/process improvements
- A Safe driving record, along with the ability to safely operate heavy machinery, vehicles, or equipment as needed is required
- 2 years technically related schooling or equivalent experience
- 3 years previous Field Technician or Gas Measurement Technician experience and experience with Natural Gas, Electrical or Instrumentation & Control experience
- Strong understanding of electrical and electronic principles
40
Measurement Technician Resume Examples & Samples
- Applies standard solutions to problems or work situations of a routine or repetitive nature. Performs routine training and developmental work assignments
- Operates portable prover vehicle for meter proving of limited number of custody transfer meters within Rose Rock’s Oklahoma pipeline system
- Ensures correct measurement of crude oil transported through pipeline system and Cushing terminal
- Establishes correct meter factor for custody transfer meters and related measurement equipment
- Analyzes meter-proving data to determine meter performance and performs required repairs or adjustments as needed
- Assists other pipeline districts with measurement-related issues
- Witnesses outside contractor meter proving and calibration of measurement equipment
- Reports meter factors to S.C.A.D.A. Control Operators in a timely manner
- Uses proper safety equipment such as H2S monitors and follows safety procedures and requirements. May participate in internal/external compliance audits and inspections
- Overtime is a requirement of the job
- Frequent travel up to 50 percent. Valid driver’s license required to operator company-owned or leased vehicle
41
Temporary Measurement Technician Assistant Resume Examples & Samples
- Have the ability to acquire knowledge to diagnose and correct the usual operating difficulties with meters and associated AMI / AMR devices
- Have the ability to acquire a thorough working knowledge of corporate safety rules and practices
- Have the ability to acquire a thorough working knowledge of testing procedure, and the operation and maintenance of meters, meter test equipment and other related devices applicable to the work
- Must possess and maintain a valid driver’s license and must have the ability to qualify for a commercial drivers license (Class B with air brake endorsement)
- Must have successfully pass the GAS test
42
Measurement Technician Resume Examples & Samples
- Perform operational inspection planning with complex 3D measuring equipment
- Must make judgments based on measurement data that may affect production. Communicate issues to the responsible quality department
- Read, analyze, and chart measurement data. Present measurement data in scheduled quality meetings
- Conduct training and briefings for new employees in coordination with the engineering office. Utilize and observe Safety Data Sheets in day-to-day work
- Participate in projects and working groups
- Apply complex Quality Management Methods (E.G. risk management and reliability predictions)
43
Measurement Technician Resume Examples & Samples
- Utilize a wide variety of precision measuring instruments and special inspection equipment to inspect first article, in-process and final manufactured parts according to drawing specifications (i.e. CMM, toolmaker's microscope, optical comparators, standard hand tools, etc.)
- Program and utilize advanced inspection equipment such as the Coordinate Measuring Machine (CMM) and Digital Inspection Devices
- Determine acceptance or rejection of products based on requirements
- Collaborate with Engineering to test and inspect products at various stages of the production/engineering process utilizing drawings, standards and specifications for appearance, quality and/or operating performance requirements and assists Engineering with compiling the collected data, and generation of reports
- Perform trending analysis and facilitate the identification and correction of failure modes and process/product improvements
- Determine whether products or material meet conformance requirements and to label, segregate, and disposition nonconforming parts
- Compile statistical data to support the development/improvement of processes to achieve better quality and reliability levels for products
- Perform first article and process audit inspections for each phase of manufacturing process for compliance with established procedures, standards and written instructions. Test such parameters as dimensions, performance and mechanical characteristics
- Coordinate all aspects of assigned lab equipment and gaging including calibration, correlation and gage repeatability and reproducibility (R&R)
- Perform calibrations on hand tools, gages and fixtures
- Write work instructions and train operators how to perform process checks and basic gage operation
- Conduct maintenance and periodic quality audits of gaging, documentation and corresponding operator knowledge within value streams
- Identifies training needs, develops training plans and performs training, skills coaching and mentoring of Technicians, Quality auditors or Production employees
- Assists Engineering with the identification and control or risks
- Performs other duties and tasks as required
- Education equivalent to a High School Diploma with seven years of previous work related experience to include five years of dimensional inspection on components
- Excellent knowledge of CMM equipment usage and operating methods
- Ability to read and interpret drawings, including Geometric Dimension and Tolerancing (GD&T)
- Ability to select and use the appropriate type of inspection device such as calipers, micrometers, gage pins, thread gages, custom gages, comparators, microscopes and CMMs
- Excellent analytical skills and the ability to solve moderately complex technical problems
- Demonstrated computer skills, preferably spreadsheets, word processing, database and other applicable software programs
- Dimensional inspection on components in a lab environment
- Prior Calypso, Camio, MeasureMind3D, PC-DMIS and MCOS MOS programing experience
- Understanding of corrective action preventive action (CAPA)
- Prior Minitab knowledge
44
Measurement Technician B Resume Examples & Samples
- Performs calibration on gas and oil meters per state and BLM requirements such as pulling gas samples, and witnessing third party gas meter proving
- Performs calibration and meter proving LACTs
- Performs inspections of meter tubes and orifice plates
45
Measurement Technician Resume Examples & Samples
- Follow al plant safety rules and policies
- Understands and promotes the integrity code. The Common Guide Principles at Daimler
- Conducts routine and non-routine inspections
- Conduct layout inspections on product, fixtures, or gages as required by the audit schedule
- Operate and maintain the CMM’s (Zeiss, Faro arm and Romer arm) and other measurement equipment as needed
- Identify the source of routine errors
- Prepare and maintain CMM programs and reports from layout inspections
- Review and report any discrepancies from the reports to group leader
- Minimize downtown by proactively setting up next job runs; Unload and store fixtures in appropriate place after job runs
- Maintain efficiency %
- Follow 5S principles and maintain good housekeeping
- Participates in regularly scheduled team meetings
- High school Diploma or GED and a minimum of 3 years of relevant measuring experience OR an associate’s degree in a technical trade (industrial technology, CNC, etc) and 2 years of relevant measuring experience
- Knowledge of 3D coordinate systems, metrology, and data processing
46
Measurement Technician Resume Examples & Samples
- Follow all plant safety rules and policies
- Understands and promotes the integrity code. The Common Guiding Principles at Daimler
- Identify the source of routine and complex errors. Perform more complex troubleshooting analysis
- Prepare and maintain CMM programs and reports from the layout inspections
- Complete complex measurement and check programs
- Performs the operational inspection planning, including the scope of the inspection, and select test equipment and devices
- Suggests improvements to existing methods and procedures
- Completes and ensures availability of appropriate documentation related to the production process
- Participates regularly in scheduled team meetings
- High school diploma or GED and 5 years of relevant measurement experience or Associate’s Degree in a technical trade (industrial technology, CNC, CAD, etc) and 3 years of relevant measuring experience
- Training in the following: AUKOM 1, AUKOM 2, Pi-Web, CALIGO, Siemens NX (CAD), SMARAGD and scanning software (may include Eagle Eye 2, PC-Dmis, and/or Polyworks software packages
47
Liquid Measurement Technician Resume Examples & Samples
- Working knowledge of oil field production and/or measurement equipment preferred
- 3 years oil field production experience, INCLUDING: 2 years’ experience as a Lease Operator or related experience
- Basic understanding of Microsoft Office Suite
- Good verbal and written skills a plus
- Frequently stands, walks, uses hands, reaches with hands and arms; may climb, stoop, kneel, crouch and crawl
- Able to deal with wet and/or humid conditions and extreme heat/cold
- Work environment may include moving mechanical parts, fumes, toxic chemicals, airborne particles and moderate to loud noise, requiring proper use of appropriate PPE
- Able to regularly lift/move up to 50 lbs., and occasionally lift/move up to 100 lbs
- Duties require close vision, distance vision and color vision
48
Measurement Technician A Resume Examples & Samples
- Conduct proving and calibrating NGL meters
- Maintaining sales and flare gas meters (Totalflows), radio communication system and configuration in gas measurement SCADA system
- Understanding of meter proving techniques/regulations
- Problem solving/troubleshooting skills
- Proficient computer skills (Microsoft, SAP)
49
Measurement Technician Resume Examples & Samples
- Maintenance and repair of measurement station, and associated equipment, included but limited: to EFM (Electronic Flow Meters), meter tubes, composite samplers, PD meters, coriolis meters, and auxiliary pressure transmitters
- Witness and verify monthly proving tests performed by 3rd party vendor
- At times, individual may be required to work alone and may be responsible for scheduling and maintaining various types of measurement equipment as it pertains to the petroleum industry
- Individual will be required to pass and complete our respiratory program and must be willing and able to work under a supplied air system
- 1+ years of direct experience in measurement work in the oil & gas industry
- Proficient in Microsoft Office ( Word, Excel, & Outlook)
- Willing and able (with or without reasonable accommodation) to comply with all aspects of a respiratory protection policy
50
Fluid Properties Measurement Technician Resume Examples & Samples
- Fluid Properties Measurements
- Conduct experiments to determine the viscosity and density of fluids as well as performing other PVT tests
- Operate tests outlined in the test program safely. Effectively communicate any immediate observations to the research staff for rapid adjustment in the test program as needed. Flexibility is required, as much of the testing performed is unique, world-class research, and results are not always as anticipated
- Education: A two or four-year college degree in engineering or technology. Relevant Oil and Gas industry experience and high mechanical aptitude is desired
- Experience: A minimum of 5 years of experience in oil and natural gas fluid properties measurements
- Mechanical and Instrumentation Skills: Experience with Instrumentation, Data Acquisition and Control systems is desired. Working safely with high pressure and high temperature fluid systems
- Data Analysis: Data collection and organization, calculations (statistical data analysis and application of mathematics), sorting and consolidating data, generating graphs and populating report templates, and database experience is beneficial
- Computing and Information Technology: Ability to write utility programs and scripts to analyze and/or plot results of experimentation -- some scripting / programming experience is beneficial (e.g., Matlab, Visual Basic, Python.) Experience and use of LabVIEW is beneficial
- Administrative: Basic document preparation and technical writing. Proficiency in Microsoft Office is expected, proficiency in Microsoft SharePoint is beneficial
