Inspector, Quality Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the inspector, quality job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

J Veum

Jackeline

Veum

6087 Ward Skyway

Boston

+1 (555) 750 6987

6087 Ward Skyway

Boston

Phone

p +1 (555) 750 6987

Experience Experience

Los Angeles, CA

Entry Quality Weld Inspector

Los Angeles, CA

Koelpin Group

Los Angeles, CA

Entry Quality Weld Inspector

Works on routine manufacturing assignments that have clear goals and standard procedures
Allows higher levels to handle more complex issues
Basic knowledge of inspection tools and measuring equipment
Keen eye for material imperfections during visual inspections
Serves as a team member
In training
Uses standard approaches

Houston, TX

Quality Rooms Inspector

Houston, TX

Ferry-Emard

Houston, TX

Quality Rooms Inspector

Effectively communicate and reinforce any changes in procedures or policy to workers
Ensure that the work goes smoothly, efficiently and is up to productivity standards
Enjoys working in a very active environment
Provide accurate resort information to guests
Coach housekeeping staff of deficiencies by following all Digital Mentor’s training practices
Report guest damage as per department procedure
Inspect Room Attendant Service Carts as outlined by department procedure

present

Phoenix, AZ

Domestic Quality Textile / Garment Inspector

Phoenix, AZ

Murazik, Hudson and Streich

present

Phoenix, AZ

Domestic Quality Textile / Garment Inspector

present

Execute all work with a professional demeanor aligned with the SGS Integrity Policy
Provide travel cost estimates as requested
Execute inspection in proscribed time frame within proscribed costs
Identify, label and prepare samples for forwarding to laboratory if testing is requested
Demonstrated proficiency in any or all of the following inspection types
Deliver well-written electronic report along with photo documentation within proscribed time frame
Record all observations and take photos for final report

Education Education

Bachelor’s Degree

Towson University

Bachelor’s Degree

Skills Skills

Working knowledge of basic math, basic statistics, and SPC
Able to use the necessary quality tools as it relates to this position
Training and/or manufacturing experience in the use of quality measurement tools (calipers, micrometer) including the ability to read blueprints
Able to use quality gauges such as: calipers, force gauges, pin gauges, micrometers, and optical measuring equipment
Good understanding of word processing, spreadsheets and email
Able to work well with others
Able to communicate effectively
Able to lift and transport up to 35 pounds and stand throughout the duration of the shift
Good time management, organizational, communication, and presentation skills
Proficient working with SAP

Create a Resume in Minutes

15 Inspector, Quality resume templates

Read our complete resume writing guides

Quality Lead Inspector Resume Examples & Samples

Prioritize work load in the labs according to production and planning needs
Provide training to new inspectors and line operators
Visually inspect and/or test all materials produced and/or used in production to determine if material meets specifications and standards
Audit processes to ensure quality standards are being met. (To include, but not limited to, production lines, operators, departments, etc.)
Enter specifications for components and product into Pilgrim (QMIS) and packaging quality software as needed
Provide quality standards and defect ranges (panoplies) as needed for production
Perform stability testing and monitoring on product
Collect and send First Production and Marketing samples
Maintain appropriate records on various products, components and production lines
Ensure corrective action is taken on defective products and components
Audit outside processors and products as needed
Audit component suppliers as needed
Provide specifications to packaging through the packaging quality software as needed
Effectively work and communicate with other departments in the organization
Effectively work and communicate with Suppliers
Capable of basic math calculations
Ability to read and interpret specifications and drawings
General knowledge of computers
Able to handles large volumes of work
Implements creative solutions to problems or opportunities
Communicates in a constructive and consistent manner

Quality WIP Inspector Resume Examples & Samples

Ensure that our products are manufactured in accordance with the appropriate requirements, internal company standards and current industry standards
Mechanical and optical inspection and/or testing of Visible/Infra-Red optical elements such as lenses, mirrors, windows, and reticules, using applicable optical and mechanical measuring tools, setups and equipment
Interpreting optical inspection data in order to assure compliance to specifications
Identify nonconformance on optical products through inspection and other analysis methods and document failed inspection results to be presented for disposition
Provide complex optical inspection support primarily for manufactured assemblies and for integrated optical systems
Ability to use micrometers, calipers, gauges, scales, multi-meters, and various test equipment
Proficient at geometric dimensioning and tolerancing as applicable to dimensional inspection
Experience with optical metrology equipment (autocollimators, interferometers, alignment telescopes, theodolites)
MS Office proficiency, SAP experience, and statistical analysis software knowledge

Field Quality Service Inspector Resume Examples & Samples

Inspect work performed to ensure conformance with scope of work for regular services and special projects
Investigate complaints about services, inspects the locations, coordinate corrective actions with vendor and report findings and resolution to client/building occupant
Report buildings conditions and recommend service changes
Assist in the development and implementation of departmental policies, procedures and standards of work
Maintain good working relationship with the vendor, client and building occupants
Provide monthly reports on findings and resolutions
Recommend continuous quality improvement and proactively share best practices
Other duties and projects as assigned by Operations Business Manager and Contracts Specialist

Quality & Standards Laboratory Inspector Resume Examples & Samples

Certification as a level NDT 3 NDT
Hands-on experience with multiple methods including Etch applications on various alloys
Demonstrated independent work, demonstrated leadership and communication skills
Specialized technical training applicable to the position
Have a working knowledge of metal processing and aerospace manufacturing processes

Inspector Quality Resume Examples & Samples

Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt
Perform inspections of aircraft, engines, parts and components, precision tools, equipment and other materials in accordance with applicable regulatory requirements
Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity
Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained
Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN)
ADDITIONAL DUTIES

Inspector, Quality Resume Examples & Samples

Perform Return to Service process and approve aircraft for return to service in accordance with the applicable regulations as delegated by the repair station accountable manager
Perform walk around inspection of aircraft for release of maintenance
Conduct aircraft weight and balance procedure in accordance with manufacturer’s acceptable or approved data as delegated by the repair station accountable manager
Ensure all regulatory paperwork (FAA, FAR/CAA, etc.) is complete and requested approvals have been obtained
Conduct aircraft flight control balancing in accordance with manufacturer’s acceptable or approved data as appropriately delegated by the FAA
Train, coach and mentor technicians and other inspectors in the performance of duties in area(s) of qualification
Assist with research activities
Perform conformity inspections as delegated by the repair station accountable manager
Conduct Internal Procedural Audits
You typically have 3 – 4 years aircraft maintenance experience
You typically have 1 year corporate / commercial jet experience
You have the ability to read and interpret engineering documents and maintenance manuals
You have the ability to read, write, and understand the English language
You have an A & P Certificate

Quality Chief Inspector Resume Examples & Samples

Reports to and serves as primary back-up to shops Quality Manager
Oversight of shop/field engine maintenance activity to ensure compliance with Quality Manual requirements, Engine Manual/AMM inspection criteria and requirements of local regulatory authorities. Independent audits/inspection of engines undergoing maintenance in the shop, including final hands-on inspection for shop engines prior to shipment
Work closely with Quality, Planners and Business Leaders to ensure execution of training programs are accomplished for existing and/or new workscopes to build-out capacity within the site
Monitors shops quality processes to ensure adherence to quality requirements set forth in the repair station manual, and GE Quality Systems
Assists Quality Manager in conducting training from a quality perspective; completion of work package documentation, work scope reviews etc
Assists Quality Manager in completion of internal/work station audits and implementation of effective corrective actions as a result of those audits
May, on occasion, accompany a team on a field job for purpose of performing field audits, and compliance to workscope requirements
Airframe and Powerplant (or Equivalent) Licensed
Minimum of 5 years of experience in Inspector or mechanic /Certifying Staff functions in aviation
Experienced on GE engine models w/ focus on complex workscopes
Demonstrated proficiency with Microsoft Office, GE Web applications, and general technical data, including ESM, AMM, SB’s
Familiar with GE Quality Systems, and local regulatory certification requirements (FAA, EASA, GCAA, etc.)
Familiarity with RCCA processes and involvement in prior Quality Events and/or Escapes investigations
Previous experience with working in and or with a "teaming" environment
Demonstrated interpersonal and leadership skills in working and communicating effectively with all levels in the organization
Strong English oral and written communication skills
Prior experience with Line maintenance, engine changes, module removal & installation, or LRU removals and installations
Detail oriented with strong attention to detail and can work independently to achieve OWS Quality goals
Established as an auditor with GE Aviation Supply Chain Quality
Demonstrated Quality, compliance and customer satisfaction skills
Knowledge of the operation's cost system
Ability to counsel and motivate workforce

Quality Receipt Inspector Resume Examples & Samples

Oversees process of and ensures that correct receipt inspection is performed for each type of material received at the plant. Manages thorough and timely completion of review. Assesses engineering requirements, tests and analyzes materials received for use in a nuclear plant to determine whether they are of acceptable quality for intended use. Properly documents findings in written analytical report and maintains records
Performs receipt inspection in compliance with site processes and procedures; reject materials or parts if determined to be substandard or otherwise non-compliant with applicable regulations. Determines if substitute materials or parts have the `critical parts characteristics necessary for approval for intended use
Maintains receipt inspector Level II certification
Identifies need for and conducts audits and assessments of any area of the Supply Organization to assure Quality Assurance program compliance and procedural adherence
Analyzes deficiencies identified during receipt inspections to ensure they are entered into the Corrective Action Process (CAP) process. May recommend solutions
Responsible for complying with the nuclear sites receipt inspection processes and procedures and performing accurate receipt inspection. Decisions have a direct impact on the safe operation of the equipment throughout the nuclear plant. Support the Business Units Emergency Response Activities as assigned

Quality Production Inspector Resume Examples & Samples

Utilize CMM to inspect diameters, gauge points and various liner dimensions
Able to understand drawings and routing detail to assure product is complete and conforming
Review material certs to assure product is manufactured for correct material
Record/document all receiving, in-process, and final inspection findings as required
5S+ involvement which includes but not limited to your working area
Uphold quality integrity and generate non-conformance reports when parts don’t meet specifications
Uphold quality standards and follow all applicable procedures
Minimum two years’ manufacturing work experience
Advance Blue Print reading, GD&T
Minimum of two years quality experience within either mechanical or aerospace industry

Inspector, Quality Resume Examples & Samples

Inspect incoming purchased parts, articles, materials, and documentation to requirements of technical data and purchase orders
Inspect outgoing parts, articles, materials, and documentation to the requirements of export shipping order and FAA requirements
Inspect export of raw materials, detail parts, kits, components, and subassemblies for visual damage and ensure contents comply with applicable parts of chapter 14 CFR, purchase order, and engineering specifications as a FAA designated inspector
Document discrepancies and coordinate resolution with assigned area of Production, Methods, Engineering, and/or Material Review Board (MRB) as appropriate

Quality Incoming Inspector for nd & rd Shifts Resume Examples & Samples

Minimum of an Associate Degree is required. Natural Science is preferred
At least two (2) years of experience in incoming inspection within pharmaceuticals, medical devices or consumer industry is required
Good knowledge of inspection process, Good Manufacturing Practices and safety regulations is required
Must be able to work in a sampling room with a gowning and a face mask during a prolonged period of time
Candidates must also wear personal protective equipment (PPE) as part of the respiratory surveillance program
Forklift license is preferred
Intermediate computer skills and use of software application(s) including MS Office are required; SAP is preferred
Bilingual (English & Spanish, oral and written) is required. Must be able to understand documents written in English
The selected candidate must be able to work for any shift, irregular schedules, extended hours including weekends and holidays per the operational needs
Availability to travel approximately 20% of the time
Physical requirements of the position include sampling, drums / containers movement using hand truck, samples transportation, stationary position, filing, and requires sporadic pull and push, bend forward and backwards, twist waist and neck, hand and arm; frequently stand, walk, sit, talk, listen, grab with one or both hands; and constantly close vision, handwriting, use of computer and general office machines / tools, laboratory equipment and instruments.Quality Control

Quality Dimensional Inspector Resume Examples & Samples

Minimum of 2 years experience with material testing and equipment use
Minimum of 2 years experience using micrometers, verniers, inspection fixtures
Minimum of 2 years applying AS9100 standards
High school diploma from an accredited institution
Minimum of 3 years experience in Quality Inspector role
Quality Associates Degree from an accredited institution
Quality Inspector Certification
Experience conducting SPC data analysis
Experience with Calypso CMM programming
Experience with Geometiric Dimensioning and Tolerance
Experience with Microsoft Office products
Experience with operating CMM inspection equipment
Ability to read and understand customer drawings/blueprints

Quality Dimensional Inspector Resume Examples & Samples

Must be able to read and comprehend dimensional drawings
Uses all types of standard measuring instruments, special gauges, fixtures, templates, and others in performing assigned duties
Checks forgings visually and dimensionally, as detailed on the inspection methods sheets
Reports non-compliance to department supervision as directed
Complete part identity marking, record dimensional data, and prepare reports as required

Inspector, Quality Resume Examples & Samples

Perform setup, in-process, incoming and final inspection audits of components and products
Perform inspections utilizing optical and mechanical measurement and test equipment
Maintain and update quality records (i.e. dimensional and functional test results)
Evaluate and maintain Statistical Process Control (SPC) charts
Develop, update, and control inspection standards
Support the operators in the review and containment of product quality
Initiate reject/scrap tickets (non-conforming) processes
Read and interpret blueprints, inspection plans, engineering drawings and specifications
Participate in problem solving activities (i.e. production support, PFMEA)
Communicate quality status to tool room and operators
Perform visual inspections of finished goods, including final goods audits
Actively support 5S, EHS (ISO14001), Quality (TS16949), and GLSS programs by following all approved practices and procedures, performing clean-up activities and identify/recommend improvements to management
Fulfill responsibilities/authorities detailed in any control plan associated with this position
1-2 years of inspection or related experience in a manufacturing environment
General knowledge of ISO/EHS standards applicable to the industry
Able to use the necessary quality tools as it relates to this position
Must be able to perform all physical requirements as it relates to this position as outline in the Functional job description
Good time management, organizational, communication, and presentation skills
Able to lift and transport up to 35 pounds and stand throughout the duration of the shift
Able to work extended hours and weekends as needed
Good understanding of word processing, spreadsheets and email
Able to work well with others
Sound decision-making skills
Associates Degree in a related field
Training and/or manufacturing experience in the use of quality measurement tools (calipers, micrometer) including the ability to read blueprints
Successful completion of all EHS training as it relates to the position
Proficient working with SAP
Working knowledge of basic math, basic statistics, and SPC
Able to use quality gauges such as: calipers, force gauges, pin gauges, micrometers, and optical measuring equipment

Entry Quality Weld Inspector Resume Examples & Samples

Limited technical knowledge required
Serves as a team member
Basic knowledge of inspection tools and measuring equipment
Basic knowledge of operational function to be inspected
Ability to achieve Welding Inspector Specialist (WIS) Level I in 1 year
Under supervision of a Level 2 Certified Inspector
Must be able to climb ladders or stairs to above ground levels
Able to maneuver and perform duties in confined or narrow work spaces
Requires physical strength and dexterity
Able to work in hot or cold climate or inclement weather conditions
Able to effectively perform work while wearing required personal protective equipment (PPE)
Keen eye for material imperfections during visual inspections
1-2 years of welding inspection experience is highly preferred
Previous welding experience or training is necessary!
Previous work in an industrial setting, construction, or manufacturing environment is a plus!

Quality Category One Inspector Resume Examples & Samples

Assure the conformity certification on behalf of the manufacturer and the approved Quality System
Validate and declares that the aircraft fully conforms to its approved design data
You must be conversant with the Company's policies and documentation system regarding Quality
You must have experience in Manufacturing, configuration control/definition, preventative maintenance specifications/maintenance schedules and the type design definition associated with the Aircraft being certified
You must be conversant with the applicable Transport Canada regulations and standards associated with a C of A, special C of A or export airworthiness certificate along with the limitations associated with the Company's manufacturer approval number 12-58C
You must understand and accept responsibilities associated with making a conformity certification of an aircraft to its approved design data
You must hold a valid AME M2 license. Endorsements on Q400 and/or Global Express are an asset
You must have at least five (5) year's Aerospace experience of which one (1) year must have been in Preflight or a Quality environment
You must have previous experience as a CAT 2 Inspector or an ACA of an AMO (an asset)
You have experience working with Transport Canada
You must have strong familiarity of the Canadian Air Regulations 561 or 571
You have High-level customer oriented approach with the desire to provide excellent service
You must demonstrate good judgment, rigor and known for professionalism discipline
Additionally, you must possess strong moral and ethical standards towards safety of the product and people
You have strong communication and presentation skills and work well with people of all levels
Your bilingualism would be considered an asset

Lead Inspector, Quality Resume Examples & Samples

Records and analyzes data and writes summaries and reports to validate or show deviations from existing standards
Works closely with management to ensure adherence to ISO standards
Recommends modifications to existing, or suggests new, standards, methods, and procedures
Maintains appropriate documentation related to quality assurance tests and inspections
Provides quality training
Provides guidance and work leadership to less-experienced staff members, and may have limited supervisory responsibilities
Serves as a team leader
Guides and directs employees in quality improvement efforts
May require professional, technical, or company certification(s), depending on job assignment
5-8 years of related quality assurance testing and/or inspection experience

Quality Final Inspector Resume Examples & Samples

Creating the strip report and shipping documents
Minimum 18 months experience in Aerospace
Must read, write, speak, and understand English
FAA Part 65 A&P License or a Repair Certificate must be obtained within three months after hire
Strong computer skills in word processing, spreadsheets and databases (SAP) is a bonus
Accuracy and attention to detail is highly important

Domestic Quality Textile / Garment Inspector Resume Examples & Samples

Record all observations and take photos for final report
Deliver well-written electronic report along with photo documentation within proscribed time frame
Identify, label and prepare samples for forwarding to laboratory if testing is requested
Provide travel cost estimates as requested
Perform technical report reviews as needed
In depth knowledge of Inspection Levels, AQLs and sampling plans, ANSI/ASQ Z14 (ISO 2859-1)
Demonstrated proficiency in any or all of the following inspection types
Ability to speak effectively before clients
Proficient in Microsoft Office – Word, Excel, Outlook a must

Quality Rooms Inspector Resume Examples & Samples

Inspect units with unbiased and guest oriented approach to ensure all standards are being met using inspection documentation
Coach housekeeping staff of deficiencies by following all Digital Mentor’s training practices
Identify training needs within current employees
Ensure that the work goes smoothly, efficiently and is up to productivity standards
Effectively communicate and reinforce any changes in procedures or policy to workers
Inspect Room Attendant Service Carts as outlined by department procedure
Report guest damage as per department procedure
Input inspection data into database
Maintain Confidentiality at all times
Provide accurate resort information to guests
Housekeeping experience and knowledge of departmental operations
A strong communicator with attention to detail and team oriented with an energetic, friendly, cheerful , and animated demeanor
Proven ability to coach, develop, and mentor
Able to multi-task
Enjoys working in a very active environment
Self-motivated and energetic
Proven guest service ability with an attention to detail
Basic computer skills for data entry