Corrosion Technician Resume Samples

4.8 (102 votes) for Corrosion Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the corrosion technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
HR
H Rath
Haylee
Rath
838 Nathen Via
San Francisco
CA
+1 (555) 101 4209
838 Nathen Via
San Francisco
CA
Phone
p +1 (555) 101 4209
Experience Experience
Detroit, MI
Corrosion Technician
Detroit, MI
Witting-Rohan
Detroit, MI
Corrosion Technician
  • Implements CP surveys of pipelines, stations, and terminals
  • Maintains records, drawings and enters data into the computer, and provides reports
  • Conducts interference tests, performs quality control inspections, and performs troubleshooting and repair of rectifiers, remote monitoring unit (RMU) equipment and directional current devices (PCRs)
  • Assists with the design of cathodic protection (CP) systems and confers with departments responsible for contracts, environmental compliance and right-of-way procurement
  • Assists with the preparation of contract drawings, specifications and bid invitations
  • Establishes and maintains professional relationships with local, regional, and national NACE (National Association of Corrosion Engineers) International organizations. May represent Company at regional inter-company corrosion coordinating committees and audits conducted by state and/or federal agencies or DOT
  • Assists with pipeline maintenance duties repairing cathodic protection and pipeline equipment and clearing right-of-way. Investigates and restore rectifier outages reported by patrol pilot
Houston, TX
Pipeline Corrosion Technician
Houston, TX
Simonis-Ebert
Houston, TX
Pipeline Corrosion Technician
  • Climbs and works at various heights and may work in a standing, sitting, lying, crouched or kneeling position
  • Actively contributes as a member of the work crew, providing and supporting the training of other members
  • Performs regularly scheduled inspections of corrosion control systems for the Gas Processing Pipelines
  • Works in temperature extremes due to weather conditions and operating equipment
  • Successfully complete OQ training on covered tasked performed
  • Troubleshoots, repairs and maintains all corrosion control protections systems and associated equipment
  • Reads and interprets drawings and schematics, uses technical resources in the performance of assigned work, uses hand and power tools, and other specialty equipment including data collection devices and related computer application programs
present
Philadelphia, PA
Senior Corrosion Technician
Philadelphia, PA
Koelpin-Hagenes
present
Philadelphia, PA
Senior Corrosion Technician
present
  • Provide maintenance of field test equipment, ensure good operating condition and render minor repairs
  • Work with Engineers in the preparation of survey reports and final job reports
  • Sketch physical features of installation site for subsequent detail
  • Conduct post installation surveys, complete interference testing and coordinate rectifier output
  • Assemble data for preparation of final client report including service recommendations
  • Monitor construction activities for adherence to design specifications
  • Sketch rectifiers, anodes, test stations, and other design features on prepared drawings
Education Education
Associate’s Degree in Corrosion Technology
Associate’s Degree in Corrosion Technology
East Carolina University
Associate’s Degree in Corrosion Technology
Skills Skills
  • Knowledge of electrical principles – intermediate proficiency
  • Strong initiative and excellent oral and written communication skills
  • Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
  • Basic computer skills (knowledge of MS Office, various operation systems and other company software)
  • MS Office – basic proficiency
  • Be available for shift work when applicable
  • Available for shift work when applicable
  • Ability to complete work assignments with minimal supervision in an acceptable time frame
  • Basic math skills (addition, subtraction, multiplication, division, fractions, decimals
  • Knowledge of protective coating used on petroleum pipelines
Create a Resume in Minutes

15 Corrosion Technician resume templates

1

Corrosion Technician Resume Examples & Samples

  • Implements CP surveys of pipelines, stations, and terminals
  • Reads and adjusts rectifiers and other pipeline/station facilities with appropriate instrumentation
  • Maintains records, drawings and enters data into the computer, and provides reports
  • Conducts interference tests, performs quality control inspections, and performs troubleshooting and repair of rectifiers, remote monitoring unit (RMU) equipment and directional current devices (PCRs)
  • Assists with the design of cathodic protection (CP) systems and confers with departments responsible for contracts, environmental compliance and right-of-way procurement
  • Assists with the preparation of contract drawings, specifications and bid invitations
  • Establishes and maintains professional relationships with local, regional, and national NACE (National Association of Corrosion Engineers) International organizations. May represent Company at regional inter-company corrosion coordinating committees and audits conducted by state and/or federal agencies or DOT
  • Specific experience in corrosion and/or pipeline operations or a technical diploma or degree
  • Must have good electrical and mechanical skills, including a basic understanding of electricity and electrical theory
  • Must be able to perform basic math and algebra calculations
  • Must have prior experience in or have the ability to sketch and develop plot plans
  • Advancement from one step level to the next is based on minimum time requirements, as well as meeting and maintaining satisfactory job performance standards and obtaining required certifications
  • Proficiency with computer applications, including Microsoft Excel, Word, Project, Outlook and CPDM
  • Well-balanced interpersonal skills and strong verbal and written communications skills are required, including the ability to do technical writing and provide required documentation and reports
  • Must be accountable and take direction from Managers; keep required work schedules, which include regular and predictable job attendance; focus attention on details; adhere to operational procedures and follow work rules
  • Organizational skills and the ability to prioritize tasks are essential, including the ability to plan, organize, and oversee assigned work programs and projects
  • Must be flexible and able to work effectively in a team environment and consistently maintain a professional and respectful demeanor/attitude with co-workers, clients, vendors, and regulatory agencies
  • Must have a good sense of direction in order to locate remote pipelines, rectifiers and test stations
  • Working knowledge of Corrosion instrumentation
  • Working knowledge of computerized data Acquisition Equipment
  • Experience in the design, construction, monitoring, and troubleshooting of cathodic protection systems and pipeline maintenance
  • Knowledge of common practices, procedures, tools, materials, and equipment used in cathodic protection of refined oil pipelines
  • Working knowledge of occupational hazards and required safety precautions related to assigned duties
  • Understanding of pipeline operations, locating, locating equipment and right-of-way
  • Knowledge of underground utility operations and right-of-way
  • Knowledge of protective coating used on petroleum pipelines
2

Corrosion Technician Resume Examples & Samples

  • 1 year experience with basic Laboratory procedures or 1 year experience with industrial pressure systems
  • Experience with instrumentation fittings
  • Experience with flow, pumps and meters
  • Experience working with pressurized gases and chemicals
  • Experience writing procedure or quality manuals preferred
  • Electrical experience in industrial circuits and automation systems
  • Knowledge of pressure/temperature systems
  • College or Technical Certification
  • Strong Mechanical skills
  • Experience with Microsoft Word, Excel
  • Familiar with high pressure fittings
3

Corrosion Technician Resume Examples & Samples

  • Collect all internal corrosion liquid samples at liquid sample pots and at pig traps
  • Install replacement coupons
  • Complete in field liquid sample chemical analysis and bacterial testing
  • Load all data to the Kinder Morgan internal corrosion database (TSIMS) on a timely basis
  • Maintain all field internal corrosion equipment
  • Set corrosion inhibitor injection rates as prescribed by Pipeline Integrity Group
  • Participate in Internal Corrosion Program Performance Evaluation meetings monthly
  • Understand and operate all corrosion related instrumentation
  • Proficient with computer skills (MS Office, operating systems, company software, and technical systems)
  • Basic Math skills (addition, subtraction, multiplication, division, fractions, decimals, etc)
  • Ability to operate and maintain chemical injection and pressure access equipment
  • Ability to effectively organize, plan, prioritize, document, and complete work independently
  • Ability to successfully work in team environment
  • Strong communication skills both verbally and in writing
  • Job level commensurate with knowledge, skills and experience
  • NACE certification
  • Experience with crude oil pipeline internal corrosion control programs
  • Knowledge of company policies, TRRC, and DOT regulations
  • Knowledge and experience with safe handling practices of liquid products
4

Corrosion Technician Resume Examples & Samples

  • Responsible for all activities related to corrosion control and pipeline integrity which includes
  • Design, install, operate, and maintain cathodic protection facilities, galvanic anodes, and internal corrosion control facilities
  • Monitor the condition of the pipeline through pipe-to-soil potentials, visual inspection, examination of coupons, data from in-line tools, etc…
  • Monitor electrical isolation and identify points of electrical shorts
  • Conduct various tests, measurements, and surveys to ensure efficient operation of cathodic protection facilities
  • Lead efforts to design and implement effective long term cathodic protection systems. Prepares drawings, and job specifications
  • Assist E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems
  • Oversee the construction and/or work activities performed by 3rd parties
  • Experience in testing and mitigation of interference issues
  • Good record of safe work practices
  • Working knowledge of environmental and safety aspects of coating projects
  • Ability to estimate installation, operating and maintenance expenses associated with corrosion systems
  • Basic computer skills (knowledge of MS Office, various operation systems and other company software)
  • Basic math skills (addition, subtraction, multiplication, division, fractions, decimals
  • Trained and skilled in the use of off road vehicles including both ATV and UTV styles
  • Must be able to work with a team, take direction from supervisor(s), adhere to required work schedules (shift work and overtime as needed), focus attention on details and follow work rules
  • Ability to mentor fellow employees when the opportunity presents itself
  • Associate degree in a technical field, or equivalent skills and experience
  • Experience with CPDM and RStreng
  • Working knowledge of AC and DC electrical systems, corrosion related portions of NEC, and NACE standards
  • Knowledge of company policies and DOT regulations
  • Knowledge and experience with safe handling practices of products (gas and liquids)
5

Corrosion Technician Resume Examples & Samples

  • Minimum 5 years experience in pipeline or related operations
  • Self starter and high drive for results
  • Must be able to handle multiple tasks
  • Exercise skill in the monitoring, maintenance, and repair of cathodic protection facilities
  • Plan, organize, and oversee assigned work programs
  • Analyze and evaluate operations; develop and implement corrective action to resolve problems
  • Use senses of sight, hearing, and smell to aid in the identification of systems and equipment malfunction
  • Distinguish basic colors
  • Physically perform the essential job functions
  • Must be self-motivated and capable of working with minimal supervision
  • Proficiency with computer applications, including Microsoft Excel, Word and Outlook
  • Well-balanced interpersonal skills and demonstrable verbal and written communication skills
  • Must be accountable and take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules
6

Corrosion Technician Resume Examples & Samples

  • Responsible for all activities related to corrosion control and pipeline integrity
  • Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
  • Design, install, operate, and maintain cathodic protection facilities, power lines, galvanic anodes, and internal corrosion control facilities
  • Monitor the condition of the pipeline through pipe-to-soil potentials, visual inspection, examination of coupons, data from in-line tools, etc
  • Atmospheric corrosion duties include performing coating evaluations and providing technical assistance to district operations
  • Internal corrosion responsibilities include evaluating, developing and monitoring the internal corrosion control program for single, multiphase gas pipelines and liquid lines
  • Gather and evaluate data, recommend, perform, and oversee mitigative measures
  • Document all related work associated with performing and maintaining regulatory compliance and operating and maintenance procedures. Lead efforts to design and implement effective long-term cathodic protection systems
  • Prepares drawings, job specifications and contract bid documents
  • Pipeline integrity responsibilities include providing assistance running in-line digital metal loss and stress corrosion cracking inspection tools, writing associated action plans, performing and documenting prove-up inspections, and writing closure reports
  • Perform coating evaluations for atmospheric corrosion control and prepare mitigation plans
  • Participate in federal inspections
  • Inspect 3rd party construction / work activities
7

Corrosion Technician Resume Examples & Samples

  • Work with specific objectives and instruction from senior staff on customer drawings and specifications
  • Conduct various specific test procedures to gather data for evaluation purposes
  • Diagnose and recommend remedies for system difficulties observed during resurvey operations
  • Apply basic skills learned as Corrosion Tech I with increasing independence
  • NACE Cathodic Protection Certified. CP II preferred
  • 3 years cathodic protection system testing and troubleshooting experience required
  • OSHA classes preferred
  • Strong team, internal customer service skills and problem solving skills
  • Must be able to handle multiple tasks simultaneously
  • Must be able to travel overnight to customer sites each week and, if needed, over the weekend
8

Corrosion Technician Resume Examples & Samples

  • More than 1 year related field experience required
  • NACE Level II Certification required
  • Strong team, internal customer service skills and problem solving skills are a must
9

Corrosion Technician Resume Examples & Samples

  • Responsible for all activities related to corrosion control and pipeline integrity for upstream, midstream, and downstream assets
  • Duties include but are not limited to: (1) Gathering and evaluating data, (2) Recommending, performing, and overseeing mitigative measures, and (3) Documenting all related work associated with performing and maintaining regulatory compliance and operating and maintenance procedures
  • Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings, troubleshooting cathodic protection equipment, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
  • Internal corrosion responsibilities include evaluating, developing, and monitoring the internal corrosion control program for gathering and transmission pipelines
  • Atmospheric corrosion duties include performing coating evaluations and providing technical assistance to region operations
  • Pipeline integrity responsibilities include providing assistance with running in-line-inspection digital metal loss, and caliper inspection tools, writing associated action plans, performing and documenting prove-up inspections, and writing closure reports
  • Complete all applicable documentation and record keeping
  • Demonstrate performance toward operational excellence
  • 1-3 years of applicable experience in the Natural Gas Industry
  • Experience reading and interpreting instructions and technical manuals
  • Knowledge of operating cost associated with the equipment in area of responsibility
  • Ability to work with a team, take direction from supervisors, keep required job schedules, focus attention on details, and follow work rules
10

Corrosion Technician Resume Examples & Samples

  • Understand and operate all corrosion related instrumentation Good record of safe work practices
  • Job level commensurate with experience and skill set. Certifications, licenses, registrations
  • NACE certification preferred
  • Must possess and maintain a valid driver’s license and driving record satisfactory to the Company and its insurers
  • May be required to achieve and maintain certifications as required to perform job duties
11

Corrosion Technician Resume Examples & Samples

  • Responsible for all elements of a field corrosion control program and provides direct support to Kinder Morgan’s pipeline integrity program
  • Cathodic protection responsibilities include, but are not limited to, gathering annual pipe-to-soil survey data; gathering rectifier readings and troubleshooting rectifier units; performing interference testing; and designing, overseeing installation of, and developing as-built drawings for cathodic protection facilities
  • Pipeline integrity focused responsibilities include providing assistance with running in-line digital metal loss and stress corrosion cracking inspection tools, writing associated action plans, performing and documenting inspections, and writing closure reports
  • Designs, installs, operates, and maintains cathodic protection facilities, galvanic anodes, and internal corrosion control facilities
  • Monitors the condition of natural gas pipeline through pipe-to-soil potentials, visual inspection, examination of corrosion coupons, review of data from in-line tools, etc
  • Monitors electrical isolation and identifies points of electrical shorts on corrosion control systems
  • Conducts various tests, measurements, and surveys to ensure efficient operation of cathodic protection facilities
  • Evaluates, develops and monitors data as part of an internal corrosion control program
  • Gathers and evaluates data, prepares corrosion control recommendations and oversees corrosion mitigation measures
  • Prepares documentation of all work associated with regulatory and compliance associated tasks
  • Leads efforts to design and implement effective long-term cathodic protection systems
  • Prepares drawings, job specifications, contractor scopes-of-work, and contract bid documents
  • Assists E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems
  • Performs coating evaluations for atmospheric corrosion control and prepare mitigation plans
  • Participates in regulatory inspections
  • Inspects 3rd party construction / work activities
  • Mentors fellow employees when appropriate
  • Understand DC circuits, Ohm’s Law, and how to apply them to cathodic protection of buried pipelines
  • Confidently operate common pipeline corrosion control related equipment and test devices such as line-locators, digital-multimeter, soil-resistivity kit, CSE half-cells, and data-collectors
  • Outstanding record of safe work practices is mandatory
  • Working knowledge of environmental and safety aspects of pipeline coating projects
  • Ability to complete work assignments in remote areas with minimal supervision in a timely manner
  • Proven ability to evaluate installation, operating and maintenance expenses associated with corrosion systems
  • NACE certification(s) – NACE-CP1, CP2, CP3 etc
  • Experience in all project management, pipeline operations, in-line-inspections,
  • Advanced knowledge of AC and DC electrical systems, corrosion related portions of NEC, and NACE standards
12

Corrosion Technician Resume Examples & Samples

  • Conduct periodic resistivity and potential surveys on pipelines, compressor stations and storage field facilities to determine corrosive areas and record performance of cathodic protection systems
  • Check rectifiers and magnesium anode installations and determine operating efficiency
  • Assists in analyzing trouble areas and recommend solutions
  • Install interference bonds in cooperation with other companies
  • Assists in conducting current requirement tests for new ground bed installations
  • Locate suitable installation; maintain records of operation and maintenance of cathodic protection equipment
  • Ensure landowners are contacted relative to new installations
  • Direct installation of magnesium anode ground beds, impressed current ground beds and rectifier installations
  • Advise Team Leader of needed repairs in corrosion test stations, bonding stations and ground bed repair
  • Directs maintenance of cathodic protection equipment such as painting of rectifiers and corrosion test stations
  • Assists instructing employees in leakage and corrosion control procedures
  • Insure leakage inspection, and assures leakage schedules are being maintained
  • Assist leakage inspection personnel and Team Leader in compiling and maintaining their leakage records
  • Compiles leakage information required by DOT
  • Checks all leakage detection equipment and affects repairs when necessary
  • Conducts close interval surveys
  • Detects and conducts the repair of shorted road casings
  • Identify corrosion issues to be addressed by Engineering Services
  • Bi-monthly: Performs various duties such as: checks working conditions of rectifier installations, and all critical bonds. Quarterly: compiles area leakage summary. Annually: checks electrolysis bonds and conducts potential surveys on protected high-pressure lines
  • Using PC and/or hand held device, completes Work Orders, enters data into Job Plans, creates new Work Orders, etc. in CMMS (Computerized Maintenance Management System - Maximo or SMART)
  • High school or GED diploma required
  • Ability to read, comprehend and apply DOT codes and ANSI / ASME standards as appropriate
  • Good organizational skill a must
  • Able to handle multiple tasks for different people
  • Able to complete work timely with little supervision
  • Must demonstrate basic personal computer (PC) skills, and must have the ability to obtain basic skills in using a hand held computer
  • Must be able to obtain basic skills in using CMMS (Maximo and SMART)
  • Willing to attend Basic, Intermediate, and Advanced Underground Short Courses annually and subsequently obtain NACE certification
  • Depending on the qualifications of the applicants, the successful candidate may be offered a position at a more appropriate level and/or ladder
13

Corrosion Technician Resume Examples & Samples

  • Sketch rectifiers, anodes, test stations and other design features on prepared drawings
  • Solve and make corrections to systems as approved by supervisors
  • Effectively transfer knowledge to other employees and clients
  • 1+ year Oil & Gas field work experience
  • NACE Cathodic Protection Tester (CP1) Certification or working towards within the next 6 months
  • Experience operating quads and snowmobiles considered an asset
  • Safety Tickets such as First Aid, CSTS, H2S, WHMIS considered an asset
14

Corrosion Technician / Technologist Resume Examples & Samples

  • Sketch rectifiers, anodes, test stations, and other design features on prepared drawings
  • Assist senior personnel in the preparation of survey reports and final job reports
  • Technical Engineering Diploma or equivalent combination of education and experience
  • 2+ years of relevant corrosion prevention and cathodic protection experience
  • Proficiency with computer software tools (Microsoft Word and Excel)
15

Corrosion Technician Resume Examples & Samples

  • Ability to work well with local Operations and Maintenance groups and other Corrosion Techs/Pipeline Integrity personnel and management
  • Demonstrate participation in the development of a culture focused on continuous improvement in safety
  • Demonstrate the ability to maintain appropriate, accurate, and time sensitive documentation and record keeping in accordance with Company Procedures
  • Responsible for supervising and supporting contract employees engaged in performing work for the company to ensure that the results meet pre-determined standards established by Denbury
  • Responsible for assisting the Corrosion Foreman in efforts to control costs
  • Assisting with the preparation of job plans and budgeting costs associated with corrosion control activities
  • Maintains open and honest lines of communication with Management, Co-Workers, other company departments, and outside organizations as required by daily operations
  • Monitor pipelines and facilities for external and internal corrosion and remediate as required per Company Procedures
  • Conduct tests including but not limited to: pipe-to-soil potentials, current magnitude and direction, visual examinations, corrosion measurements, soil resistivity, etc
  • Applies corrosion skills and aptitude to repair, install, troubleshoot, and perform other predictive and preventative maintenance tasks on cathodic protection systems and associated equipment and devices (rectifiers, ground beds, test stations, critical bonds, foreign line crossings, cased crossings, surveys, etc.)
  • Conducting close interval, ACVG, and DCVG surveys to detect deficiencies and correcting identified interference issues
  • Familiar with the Integrity Management Program and High Consequence Areas including: identification, validation, and assessments
  • Perform visual atmospheric inspections on above ground facilities and make or suggest repair criteria
  • Install, remove, and inspect internal corrosion coupons used to monitor internal pipeline corrosion rates
  • Inspect exposed pipe for coating failures, physical damage, or corrosion
  • Five (5) years of corrosion control related experience
  • NACE CP Tester or Technician is preferred
  • Strong initiative and excellent oral and written communication skills
  • Basic computer skills including: Microsoft Office Applications is required and Corrosion Database software is preferred
  • Electrical knowledge including AC, DC, and electrochemical theory
  • Must demonstrate a commitment to understanding and complying with all Federal, State, Local, and Company regulations, policies, guidelines, and procedures
  • Must be self-motivated and able to organize and plan daily work activities with little supervision
  • Knowledge of pipeline operations and the characteristics of products transported by pipeline
  • Valid driver’s license with acceptable driving record
16

Corrosion Technician Resume Examples & Samples

  • Gather and evaluate data toward corrosion control and pipeline integrity to include: gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
  • Recommend, perform, and oversee mitigative measures
  • Safely and efficiently effect the installation, maintenance, calibration and repair of Cathodic Protection equipment
  • Coordinate with the Operations Department as required to minimize operational impacts
  • Perform periodic inspections of electrical isolation and identify points of electrical shorts
  • Oversee the construction and / or work activities performed by 3rd parties
  • Maintain completion status of the ROW OQ defense training
  • Perform duties as assigned by supervision
17

Corrosion Technician Resume Examples & Samples

  • This role performs tests, repairs and maintenance related to pipeline corrosion
  • Inspects and tests facilities and equipment to identify existing and potential corrosion problems
  • Recommends course of action to eliminate or rectify corrosion activity
  • Installs and inspects cathodic protection equipment
  • Repairs, replaces and services corrosion equipment components
  • Identifies outside currents negatively affecting company operations and initiates corrective steps. Performs leak and odorant tests
  • Monitors advancements related to corrosion technology, practices, techniques and regulations
  • Maintains interactive work relationship with Specialists and Engineers to accurately and effectively complete job responsibilities
  • Directs and supports contractors to complete evaluations and reports and to develop mitigation measures to effectively address deficiencies in the cathodic protection systems
  • This is the first level of a two level job series
  • REQUIRED: A minimum of two years of corrosion control and cathodic protection experience or 3 years natural gas field experience
  • Documented knowledge and/or experience with corrosion control and electrical principles
  • Documented basic computer knowledge and/or experience
  • Knowledge of corrosion control and electrical principles
  • Knowledge of DOT regulations related to corrosion, odorant, leak testing and record keeping
  • Ability to use and maintain corrosion testing and cathodic protection equipment
  • Ability to define problems, collect data and draw valid conclusions
  • Ability to operate diagnostic testing equipment
  • Ability to interpret maps, plans and blueprints to locate pipeline facilities
  • Ability to communicate effectively, speak persuasively and develop rapport
  • Ability to operate personal computer and utilize software packages
  • Ability to work effectively in inclement weather conditions
  • Three years corrosion technician experience in related industry preferred
  • NACE I certification - If candidate does not have NACE I certification, they will be required to obtain NACE Level I within one year of hire
  • Preferred Degree or must have an equivalent combination of education and demonstrated related experience in lieu of preferred degree
  • Preferred: Associate, Other Education: Technical
18

Corrosion Technician Resume Examples & Samples

  • Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, completing as-built drawings for needed cathodic facilities, and completing project closure reports
  • Internal corrosion responsibilities include evaluating, developing and monitoring the internal corrosion control program for gas pipelines
  • Gather and evaluate data, recommend, perform, and oversee mitigation measures
  • Prepare drawings, job specifications, and contract bid documents
  • Assist E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems as needed
  • Participate in PHMSA inspections
  • Must be available to respond to “Special Permit” designated rectifier failures within 2 working days unless back-up arrangements are made
  • Must be available by company supplied cell at all times to respond to phone calls, callouts and emergencies, unless previous arrangements for back-up coverage are made
  • Be willing to travel overnight for training and to assist other corrosion technicians when needed
  • Proficient with computer skills (MS Office, CPDM, operating systems, company software, and technical systems)
  • Intermediate Math skills (addition, subtraction, multiplication, division, fractions, decimals, etc.)
  • Use safe work practice and active participation in the safety program
  • Experience with CPDM and RSTRENG
19

Corrosion Technician Resume Examples & Samples

  • Responsible to perform required readings (i.e. annual test points, isolated services, casings, bonds, foreign crossings) in compliance with applicable codes, standards, and procedures
  • Responsible for timely cathodic protection troubleshooting (i.e. low systems, shorted conditions)
  • Responsible for timely creation of remediation work orders (i.e. install anodes, clear short, install insulator, repair / replace test station). Follows through with necessary departments to ensure timely completion
  • Responsible for maintenance and updates of corrosion control mapping systems (Atlas pages / GIS) in a timely fashion
  • Responsible for performance of QA checks on reads performed by others
  • Responsible for troubleshooting and maintenance of rectifiers
  • Responsible for calibrating half-cells in accordance with procedures
  • Responsible for bridge inspections (exposed) crossings in accordance with procedures
  • Responsible for design of cathodic protection systems
  • High school diploma with equivalent combination of education and experience
  • MS Office – basic proficiency
  • Ability to read and understand codes, standards, and procedures
  • Mathematics aptitude – intermediate proficiency
  • Associate degree – technical / trade school with math or science-based curriculum
  • 3 years pipeline cathodic protection / corrosion control
  • MS Office – intermediate proficiency
  • Knowledge of electrical principles – intermediate proficiency
  • Intermediate cathodic protection troubleshooting skills
  • Basic CP design skills
  • 6+ years pipeline cathodic protection / corrosion control
  • Advanced cathodic protection troubleshooting skills
  • Intermediate CP design skills
20

Pipeline Corrosion Technician Resume Examples & Samples

  • Performs regularly scheduled inspections of corrosion control systems for the Gas Processing Pipelines
  • Applies corrosion control knowledge skills to repair, install, troubleshoot, analyze and perform other predictive and preventative maintenance tasks on assigned equipment, facilities, systems, and associated devices (rectifiers, test stations, ground beds, critical bonds, foreign line crossings, cased crossing, surveys, internal coupons, etc.)
  • Maintains and operates assigned equipment to meet operational needs in compliance with Company and regulatory requirements
  • Reads and interprets drawings and schematics, uses technical resources in the performance of assigned work, uses hand and power tools, and other specialty equipment including data collection devices and related computer application programs
  • Actively contributes as a member of the work crew, providing and supporting the training of other members
  • Works indoors and outdoors, in and around mechanical, industrial and electrical equipment
  • Required to climb about equipment and work in close proximities
  • Climbs and works at various heights and may work in a standing, sitting, lying, crouched or kneeling position
  • Capable of lifting from ground level a load up to 50 lbs
  • Must have the ability to get in and out of vehicles regularly and ride over rough roads
  • May be subject to overtime, required to carry a cell phone, and subject to 24/7 call out
  • Maintains and documents all records to comply with all regulatory and Company requirements
  • Troubleshoots, repairs and maintains all corrosion control protections systems and associated equipment
  • Actively support all corrosion control related activities associated with maintenance and new construction projects
  • Inspect and document anomalies (wall thickness, measure corrosion pits etc.)
  • A minimum of 5 years of Corrosion Control experience
  • NACE Corrosion Technician certification is preferred
  • DOT 49 CFR 192 experience
  • Experience with corrosion data tracking systems
  • Good communicator, work planner with excellent work ethics and a good background in computer applications
  • Must be available for call-out rotation and emergencies
21

Corrosion Technician Resume Examples & Samples

  • Execution of regulatory and company corrosion programs by
  • Corrosion Control fundamental including NACE standard practices and test methods
  • Strong audit and controls orientation
22

Corrosion Technician Resume Examples & Samples

  • Fully utilize company computer system and software
  • Supervise and participate in Cathodic protection system design and materials installation
  • Maintain Cathodic protection equipment
  • Budget and execute special projects
  • Provide thorough and accurate monthly reporting on all activities
  • Possess a working knowledge of 49 CFR part 195 and 192 if applicable
  • Technical group field representative for corrosion
  • Embrace and champion all safety policies and procedures according to the SPL HSSE manual
  • Manage contractors in a safe and efficient manor
  • Able to work unsupervised
23

Corrosion Technician Resume Examples & Samples

  • Maintain, troubleshoot and repair cathodic protection, internal corrosion monitoring and above/below ground coating systems
  • Manage and coordinate usage of third party contractors for corrosion surveys and cathodic protection system installations
  • Provide training, coaching and mentoring to other field personnel who perform corrosion control activities
  • Maintain company records to assure compliance with regulatory requirements
  • Provide technical expertise to assess and resolve design, operating and maintenance
  • Must have a minimum NACE Level CP2 Cathodic Protection Technician certification
  • Must have a minimum 3-5 years of experience in pipeline corrosion control
  • Knowledge of 49CFR Part 195 and related industry standards is required
  • Demonstrate effective written & verbal communication skills
  • Highly motivated with interpersonal skills to effectively work in a collaborative team
  • Subject to call out 24 hours a day, 7 days a week and extended workdays and/or
24

Nis-corrosion Technician Resume Examples & Samples

  • Requires a high school diploma or equivalent. Two-year technical degree is preferred
  • Requires two (2) years operations experience or equivalent technical experience. Three (3) years of plant field experience is preferred
  • Working knowledge of Work Management System (WMS), CMS, and DIS mainframe programs is preferred
  • Requires knowledge of CGV corrosion policies/procedures and applicable federal, state, and local regulations
  • Requires strong organizational/planning skills and a commitment to getting the job done
  • Requires strong interpersonal and communications skills and the ability to establish rapport with internal and external customers
  • Requires strong analytical skills and ability to interpret technical data with respect to inventory maps
  • Requires electrical and mechanical aptitudes in order to maintain corrosion equipment
  • Must be self-motivated and able to work with little direct supervision
  • Must be detail oriented and able to complete required documentation
  • Must be able to handle multiple projects and work effectively under deadlines and changing priorities and conditions
  • Must have demonstrated skills in decision making and problem solving
  • Must have a valid drivers license and be able to operate company vehicles
25

Corrosion Technician Resume Examples & Samples

  • The regular work schedule will be
  • Ensure facilities, personnel, tasks and duties comply with TransCanada's Community, Safety and Environmental policies and procedures as well as provincial standards
  • Maintain and utilize "as built" prints and update related documentation with respect to cathodic protection systems and pipeline related schematics
  • Utilize TransCanada’s computer maintenance systems
  • Install, commission, maintain, troubleshoot and repair cathodic protection systems
  • Provide feedback & support to Cathodic Protection Engineering & Project Management Team
  • Operate and maintain remote operating units for rectifiers (RMU)
  • Perform annual pipe to soil potential surveys, close interval surveys and analyze data
  • Perform required diagnostic testing e.g. shorted casings, interference testing
  • Assist and develop test station repair programs
  • Assist with general pipeline Right of Way (ROW) maintenance activities (erosion or sink hole repairs, line patrol, install identification signs and posts)
  • Play a lead role in notifying landowners and working with Contractors
  • Lead and manage safe and efficient completion of projects in the area, including the coordination and monitoring of contractor work activities or third party active control
  • Perform basic One Call line locates
  • Highly motivated and disciplined with strong interpersonal skills to effectively work in a geographically dispersed team environment
  • Demonstrated ability to competently and efficiently perform the duties assigned based on qualifications and experience
  • Willingness to work in all areas as required to support the team
  • Competent using equipment applicable to the maintenance of cathodic protection systems
  • Current with technological advances in the cathodic protection field
  • Utilize computers and e-mail for internal and external communication, record keeping, maintenance management, on-line reporting, material and supply ordering and filing of various forms
  • NACE Cathodic Protection Level 1 Certification is required
  • Minimum 5 years of experience in cathodic protection systems is preferred
  • Journeyman Interprovincial Electrical License and/or designation would be an asset
  • NACE Cathodic Protection Level 2 Certification would be an asset
  • Provide a driver's abstract for review
26

Corrosion Technician Resume Examples & Samples

  • This position is overtime eligible; hours of work may need to be extended as business needs arise. This position may require long periods at a work station, and may be required to drive long distances, be exposed to field operations and construction environments, travel on short notice to other company locations, which may involve some overnight stays away from home
  • Develop rolling short term (1-3 months) team work plans incorporating maintenance programs, regulatory compliance activities, project support and corrective maintenance work
  • Load leveling of resource availability ongoing against work commitments. Highlight resourcing pinch points and work solutions with corrosion manager and MPM
  • Plan and manage major and minor outages and routine maintenance
  • Scheduling of monthly/weekly team resources: Develop work execution plans and detailed schedules to provide direction and coordination of project activities associated with the corrosion team
  • Ensure work orders and other required documentation are created and properly scoped and reported for all work within the team
  • Utilize regional contracting strategies, including supply of parts and vendor services, to ensure required resources are available to complete the work as per the plans
  • Act as the area contact to all other departments for short term planning issues, resource availability and updates / progress reports for all major area work
  • Act as a conduit for the team for tracking and documenting ongoing value creation examples from within the area, and entering them ongoing into the CGO value creation tracker
  • Collaborate and support other Field Work Planners as needed within the region, and across regions when required
  • Provide regular assessments and reports of work plan completion and variance explains
  • Work closely with corrosion technicians and other members of the integrated CP team to ensure that costs are properly allocated when work orders are initially produced
  • Incorporate revisions and ensure accuracy of entity information and maintenance programs that are modified at a local/regional level
  • Facilitate one-month plan handoff meetings, weekly scheduling meetings, and other impromptu communications meetings as required in support on work management and scheduling activities
  • Provide first hand monthly support to budget activities, preparation and reporting processes
  • Periodically facilitate and/or participate in weekly communications meetings in support of ongoing work management activities
  • Capability and flexibility to respond to time pressure by adjusting work hours to meet critical deadlines
  • Ability to prioritize and manage numerous competing work requests and expectations simultaneously
  • Ability to provide and present timely and relevant feedback and or reporting to various stakeholders
  • Detail oriented with good organizational and planning skills
  • Working knowledge of computers and related software, including excel and SAP
  • Application of analytical and reporting skills to communicate work progress and variances
  • Post-Secondary education in a related field is preferred
  • Minimum 5 years of experience in cathodic protection systems maintenance is preferred
  • Solid understanding of the fundamental principles of Maintenance Management and analytical skills supported by use of software applications
  • Superior MS Office Suite skills and/or Microsoft Project is preferred
  • SAP experience is considered a key asset
27

Corrosion Technician Resume Examples & Samples

  • Two (2) years operations experience or equivalent technical experience. Three (3) years of plant field experience is preferred
  • Strong organizational/planning skills and a commitment to getting the job done
  • Strong interpersonal and communications skills and the ability to establish rapport with internal and external customers
  • Strong analytical skills and ability to interpret technical data with respect to inventory maps
  • Electrical and mechanical aptitudes in order to maintain corrosion equipment
  • Experience with PC applications (Word, Excel, etc)
  • Must have demonstrated skills in decision-making and problem solving
28

Senior, Corrosion Technician Resume Examples & Samples

  • Compliance with all associated regulations (TRRC Pipeline Safety Rules and Regulations) which includes the necessary reporting and documentation
  • Achieve safe operations of the pipelines and facilities
  • Perform design, installation and maintenance on Cathodic Protection systems
  • Perform periodic surveys for rectifiers, bonds, and annual pipe to soils
  • Perform scheduling, maintenance, and treating for internal corrosion control
  • Minimum 5 year experience related experience with corrosion control
  • Working knowledge and understanding of corrosion equipment and process
  • High integrity and self motivated
  • Good communication, problem solving and physical perceptive skills
29

Corrosion Technician Resume Examples & Samples

  • Plan and perform duties such as testing, evaluation and installation of cathodic protection systems to inhibit corrosion on various structures
  • 2+ years of oil and gas field work experience
  • NACE CP1, CP2, CP3 or CP4 certification
  • Rectifier training an asset
30

Nace CP Corrosion Technician Resume Examples & Samples

  • Assist senior staff in the preparation of survey reports and final job reports
  • Assemble data for preparation of final client report including service recommendations
  • Provide maintenance of field test equipment, ensure good operating condition and render minor repairs
  • Basic NACE Corrosion courses and NACE CP Level 1 certification helpful
  • 2 years related experience required
  • Basic Operator Qualifications required
  • OSHA classes required
  • Must be able to travel to client sites regularly (75% travel, usually only during the week with some weekend travel)
31

Senior Corrosion Technician Resume Examples & Samples

  • Monitor construction activities for adherence to design specifications
  • Gather structure-to-soil potential data, soil measurements and rectifier data
  • Conduct post installation surveys, complete interference testing and coordinate rectifier output
  • Work with Engineers in analyzing requirements and the design of appropriate corrosion control measures
  • Recommend modifications as needed
  • Work with Engineers in the preparation of survey reports and final job reports
  • Function as Crew Leader as needed
  • 4+ years of relevant corrosion prevention and cathodic protection experience
  • 4+ years of Oil & Gas field work experience
  • NACE Cathodic Protection Technician (CP2) Certification
  • Rectifier training considered an asset
32

Corrosion Technician Resume Examples & Samples

  • Provide technical expertise to assess and resolve design, operating and maintenance issues related to corrosion control
  • Identify and mitigate interference issues
  • Assist in the design of and maintain cathodic protection systems
  • Represent Company in PHMSA audits of corrosion control program
  • Maintain/repair rectifier remote monitoring system
  • Ability to make informed decisions involving pipeline remediation and repair, coating systems, and corrosion control on pipelines, pump stations and terminals
  • Excellent interpersonal and communications skills are required to work effectively in a team environment
  • Must have a minimum NACE Level CP2 Cathodic Protection Technician certification with the expectation to attain NACE Level 2 CP2
  • Must have a minimum 3-5 years’ experience in pipeline corrosion control
  • Internal corrosion prevention experience preferred, liquid sampling and coupons
  • Atmospheric inspection experience preferred
  • Above/below ground coatings experience preferred
  • Be subject to call out 24 hours a day, 7 days a week and extended workdays and/or workweeks including overnights stays away from home location
  • May be required to carry a pager and cell phone, to work a rotating on-call schedule, and is subject to 24-hr/day callout at any time for emergency response
  • Must be qualified or able to qualify in DOT Operator Qualifications, and to advance individual skills as assigned/required for position within defined deadlines
33

Transmission Corrosion Technician Resume Examples & Samples

  • Ability to interact with internal and external clients to receive highly advancedinformation and data
  • Knowledge and/or experience in department practices and procedures
  • Ability to solve a range of basic problems