Metrology Technician Job Description
Metrology technician
provides in-depth technical and procedural advice for repair, calibration, and modification of a wide variety of complex precision measurement equipment utilized for assigned program.
Metrology Technician Duties & Responsibilities
To write an effective metrology technician job description, begin by listing detailed duties, responsibilities and expectations. We have included metrology technician job description templates that you can modify and use.
Sample responsibilities for this position include:
Program CMM for FPA, OpEx projects, process control, set-up and audit inspection, part and tool troubleshooting, for all production parts used in dishwashers
Draft final reports and present in the appropriate mode to meet the customers needs
Train, instruct, and assist others as needed
Requires basic mechanical aptitude including ability to read and interpret dimensions, tolerances, and assembly notes
Understanding of basic problem solving skills, including statistical analysis, and ability to use these tools to drive root cause identification and problem solving
Testing of design concepts, prototypes and modifications
Drafts and development of Engineering Test Plans, recording of test results and creation of Engineering Reports and related SIGMA documentation
Design, prototyping and building of test fixtures and manufacturing equipment
Creation of Manufacturing Work Instructions and related documentation
Conducting validation activities, as required
Metrology Technician Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Metrology Technician
List any licenses or certifications required by the position: ASQ, ISO, GMP, 9000, FCA, IPC, SOP, FDA, ASTM, PME
Education for Metrology Technician
Typically a job would require a certain level of education.
Employers hiring for the metrology technician job most commonly would prefer for their future employee to have a relevant degree such as Associate and High School Degree in Technical, Associates, Military, Engineering, Science, Education, Graduate, Electronics, General Education, Manufacturing
Skills for Metrology Technician
Desired skills for metrology technician include:
GD&T
Basic relay ladder logic
Precision measurement and precision measurement equipment as determined by a structured interview
Programmable logic controllers
210/211
CGMP guidelines
Equivalent training
FDA 21 CFR Part 11
ISO 14644 and 17025
Science generally attained through studies resulting in an Associate’s Degree in electronics technology
Desired experience for metrology technician includes:
Troubleshoot Engineering problems and sits on significant project teams to provide insight and resourcing to project teams
Perform other duties, as defined by the Laboratory Manager
Perform job functions under limited supervision in laboratory, production area, clean room, and test environments
Perform calibrations and measurements traceable to the International System of Units (SI) using appropriate reference standards
Work with data acquisition and validation equipment, process control equipment/controllers, chart recorders, DC Analog/Signal Conditioners, and transducers
Responsible for laboratory facility and related environmental control development, operation and maintenance
Metrology Technician Examples
1
Metrology Technician Job Description
Job Description Example
Our growing company is looking for a metrology technician. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for metrology technician
- Plans sequence of testing and calibration procedures for instruments and equipment according to drawings, schematics, technical manuals, and other specifications
- Provides technical assistance in area of expertise to other technicians in disciplines
- Maintains calibration standards and equipment
- Inspect samples of purchased and InSinkErator manufactured parts
- Program, set-up and operate a wide variety of inspection and test equipment including CMM with PC-DMIS software, optical comparator and computer assisted precision measurement instruments
- Conduct Gage Repeatability & Reproducibility studies, capability studies, and correlation studies
- Clean, adjust, calibrate and maintain gages and production test equipment
- Maintain accurate records and report results, including nonconformances, per procedures
- Cross-train others
- Coordinate with suppliers to develop measurement and test correlation
Qualifications for metrology technician
- Advanced knowledge in calibrating metrology instruments and equipment for conformance to established standards
- Ability to calculate measurement uncertainty for laboratory standards and customers equipment
- Ability to lift/pull 20lbs, frequent lifting and stooping and standing as needed
- Proficient using Microsoft technology, including Excel
- Diploma in Electronics / Electric/Instrumentation or related areas or higher
- Assist with SPC activities and root cause analysis
2
Metrology Technician Job Description
Job Description Example
Our growing company is hiring for a metrology technician. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for metrology technician
- Initiate Out-Of-Tolerance (OOT) reports as needed
- Perform review of pertinent logs including but not limited to pH production probes, QC pipettes
- Assist in providing pertinent documentation
- Inspection and approval of all supplied packaging components will be required as needed
- Provides certificate of conformance based on acceptable quality level of pre-delivered samples, or samples collected from an individual component lot, to approve the use of components from the supplier for Greenville Solution Plant production
- CATIA or 3D CAD experience to work with native files STEP and IGES to compare collected measurement data to nominal condition
- Maintain a cooperative attitude toward all associates
- Perform mechanical plate layouts with minimal supervision
- Apply analytical problem solving techniques where appropriate
- Interpret, operate, program and edit helical gear programs into the P40 gear analyzer, CMM’s
Qualifications for metrology technician
- At least 2 years of focused experience in dual beam FIB and SEM operation, experience with TEM sample preparation is highly desirable
- High level of proficiency and extensive operating experience of Dual Beams desirable
- Candidate should possess good written and verbal communication skills to work with large internal customer base
- Knowledge of DeviceNet and Foundation Fieldbus instrumentation, Delta V distributed control system, and Rosemount’s A.M.S
- Benchtop, Fluke Met/Track and Met/Cal experience a plus
- Preferred candidates will demonstrate technical competency of AMS2750, Pyrometry and NADCAP, Electronic Calibration, Fluke MetTeam, Met/Cal and PMEL a plus
3
Metrology Technician Job Description
Job Description Example
Our company is hiring for a metrology technician. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for metrology technician
- Perform detailed analysis (Deviation, Color Charts, GD&T, ) and produce necessary deliverables
- Participate in GR & R studies
- Use CMM and optical comparator for inspection
- Perform GP12 inspections
- Occasionally required to drive GM owned vehicles on and off GM property for business
- Perform calibration and repair of medium to high level test and measurement equipment
- Maintain technical proficiency and effectiveness through various means such as self-study, local college and internal training programs proficiency testing
- Determines and may develop measurement methods and procedures from blueprints, drawings, models, and diagrams
- Provides written reports on measurement results comparing to standards
- Prepares technical reports summarizing findings
Qualifications for metrology technician
- Calibration experience including dimensional, temperature, flow, mass, pressure, rotation & balance
- Knowledge of Microsoft Office Applications (Word, Excel, Access, and PowerPoint) and Windows
- Fluke Met/Track and Met/Cal experience a plus
- Two years technical degree/certification or military training equivalent
- Basic knowledge of metrology ideas and how to apply are desired
- Good understanding of Metrology tools and capabilities
4
Metrology Technician Job Description
Job Description Example
Our growing company is searching for experienced candidates for the position of metrology technician. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for metrology technician
- Program, set up and operate CMM in order to make complex, precise measurements of materials and parts
- Verify conformance of parts to specifications and blueprints with respect to measurements
- Write and modify existing programs and create new ones as required
- Performs detailed first article inspections of prototype and production parts
- Uses a variety of measuring instruments
- Provides support for investigations of issues and development work
- Assist Engineers, Technicians and Customers with qualification and validation of new or revised parts or tooling
- Interpret measurement output data and graphic data
- Summarizes results and communicates them to engineering and others as needed
- Create and perform GR&Rs and correlation studies as needed
Qualifications for metrology technician
- Capability to learn calibration software
- Fast learner and capable of supporting Metrology Recipes/applications on A-shift, with minimum in-house training provided
- Good communication skills and able to work/interact with Mfg
- Good written skills and capable of generating shift Passdowns for next shift Techs
- AS degree in Electrical, Mechanical, or a related field
- A responsible person and a team player
5
Metrology Technician Job Description
Job Description Example
Our growing company is looking to fill the role of metrology technician. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for metrology technician
- Adheres to ISO9001 requirements
- Assists in training others in the use of equipment
- Position is contingent upon PO approval *
- Provides troubleshooting, preventive and demand maintenance work on a variety of equipment and systems including centrifuges, compressors, gear boxes, autoclaves, washers, blowers, mixers, reactors, pumps, heat exchangers, piping systems, along with other equipment related to production operations
- Wears appropriate PPE
- Leads safety-related teams (e.g., being an EH&S Activity Coordinator, leading JSAs)
- Completes training on time
- Provide general direction and work prioritization for vendor contracted maintenance support
- Update equipment history, process, document, and report results of all work performed
- This candidate will be fully responsible to support All wafer fab Metrology tools on his/her Respective Shift
Qualifications for metrology technician
- Computer skills including MS Excel and Work
- Proficient in all Microsoft Applications (Word, Excel, Outlook, and Access)
- Ability to use calipers, micrometers, height gage
- Qualified CMM / Faro Arm technician with understanding of measuring
- Technical or Bachelor’s degree in Chemistry or equivalent
- Well-developed written and oral communication capabilities