Manufacturing Tech Job Description
Manufacturing tech
provides direct, day to day technical engineering support and leadership for manufacturing and chemical operations and maintenance.
Manufacturing Tech Duties & Responsibilities
To write an effective manufacturing tech job description, begin by listing detailed duties, responsibilities and expectations. We have included manufacturing tech job description templates that you can modify and use.
Sample responsibilities for this position include:
Centralize all relevant technical/safety/procedural information/manuals for maintenance group, including safety data sheets, technical Information, publications, maintenance procedures, and job specific Employee Resource information
Ensure timely and accurate generation of process documentation
Performs a variety of non-routine and non-repetitive production assembly operations on electronic assemblies
Determines methods and sequences of assembly operations where complete information may not be readily available
Works from diagrams and drawings
May disassemble, modify or rework, reassemble experimental/prototype assemblies and subassemblies in accordance with specifications/drawings
May be part of device teardown, removal, and/or site installation team, which will require travel to field installation sites, possibly overseas
Possible shift work involved from time to time
Must exhibit “teamwork” attitude
Some overtime will be required as needed and at times on a regular basis
Manufacturing Tech Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Manufacturing Tech
List any licenses or certifications required by the position: OTMIS, CNC, ABO, IPC, QC, CPR, AIRS, DOT, I/II, PCI
Education for Manufacturing Tech
Typically a job would require a certain level of education.
Employers hiring for the manufacturing tech job most commonly would prefer for their future employee to have a relevant degree such as Associate and High School Degree in Manufacturing, Associates, Technical, Education, Engineering, Science, Performance, Communication, Management, Electronics
Skills for Manufacturing Tech
Desired skills for manufacturing tech include:
Basic chemical and biological safety procedures
Specialty area
Technical
Analyzers
Control valves
Pumps
Sensors
Related manufacturing techniques and specialties
Indicators
Basic chemical procedures
Desired experience for manufacturing tech includes:
Must either have a current Department of Defense (DoD) Secret security clearance, or higher level, or have the ability to obtain a Secret security clearance without any concerns or issues
Remove, install and adjust tooling by using various hand tools
Experience and knowledge of installing control wiring
May conduct training regarding on job skills and use of production/process documentation
May perform basic preventative maintenance and assists in trouble shooting or preparing standard production equipment for maintenance
May assist in maintaining and updating documented production/process instructions
Manufacturing Tech Examples
1
Manufacturing Tech Job Description
Job Description Example
Our company is growing rapidly and is looking to fill the role of manufacturing tech. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for manufacturing tech
- Specialized expertise and technical ability in Test and troubleshooting in support of the instrument products
- You will be providing multi-disciplinary support to NPI engineers and production to resolve a wide range of associated technical and design issues
- Whether, leading cross-functional teams or taking a hands-on approach, you are adept at implementing solutions to complex technical problems
- You will be working with Manufacturing and NPI to provide technical support in qualifying new designs and developing tools and fixtures
- Move freight, stock, or other materials to and from storage or production areas by hand or by hand trucks or fork lifts or other equipment
- Create maintenance documents for each tool with pictures and identify/update/develop formal lock-out-tag-out procedures for each piece of equipment where these procedures are lacking
- Develop and improve our spare parts inventory and tracking systems to improve equipment availability metrics
- May assist in training other employees on production skills
- May assist in preventative maintenance of standard production equipment
- Help manage the AMCL C4 lab and train other CW’s on all metrology tools like ICOS T53S, Takaoka MVI S9000, AV500, QV, and Zeiss microscope
Qualifications for manufacturing tech
- Passport will be required for overseas travel (when scheduled to support)
- Working knowledge of several business systems/concepts within the work area such as Demand Flow , Statistical Process Control, Process Documentation, Empowerment, Six Sigma methods, Quality and/or Cost Improvement
- Must possess a clear understanding of basic math
- Ability to read and comprehend component and subassembly drawings
- Demonstrated ability to use hand tools, power tools and measuring tools
- Overhead crane experience lifting and turning large weldments and tanks
2
Manufacturing Tech Job Description
Job Description Example
Our company is growing rapidly and is searching for experienced candidates for the position of manufacturing tech. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for manufacturing tech
- Position requires working efficiently from standard procedures and specifications
- Technician works 8 hour shifts and spend most their time standing to perform the work
- Some, if not all, tasks performed require repetitive motion to an extent
- Minor mechanical repairs , replacement of drive belts and chains, shafts and bearings
- Conduct preventative maintenance , greasing bearings, chains, adjust drive belt/chain tension, and evaluate component wear and recommend replacement parts
- Provides direction and guidance to predominantly non-salaried and entry level personnel
- The MT is responsible for troubleshooting support on electrical and mechanical equipment in the facility including, robots, PLC, drives, gear reductions, conveyors, fill equipment, hoists, ovens and environmental systems
- Vacuum experience is a plus
- Supply components, small parts, tubing
- Train other technicians
Qualifications for manufacturing tech
- Ability to do flat sheet layouts with bend lines
- Must be able to effectively perform mechanical, functional, electrical, and software tests
- Ability to lift from 5 to 50 pounds
- Must have computer proficiency with basic office software
- Previous successful work experience, preferably in a chemical manufacturing or batch production environment
- Basic understanding of material logistics
3
Manufacturing Tech Job Description
Job Description Example
Our growing company is looking to fill the role of manufacturing tech. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for manufacturing tech
- Pushing buffer containers ranging from 50L to 200L (during processing)
- Sitting for periods of 2 to 3 hours (during processing)
- During Production Processing these activities may increase
- Operation support, troubleshooting, diagnosing and repairing of assigned equipment group/area and other areas as needed
- Drive execution and planning of planned maintenance work load
- Install or relocate manufacturing equipment, dust collection, compressed air and electrical systems per MFG Eng
- Inspection of finished and in-process products by performing visual, basic dimensional and documentation inspection
- Using inspection equipment, measuring techniques and use of PC and mainframe computer system
- Follow specified procedures or instructions within the framework of the FDA Quality Systems Requirements (QSR’s) and ISO 9001 standards
- Performs preventative maintenance on facility equipment as outlined in schedule
Qualifications for manufacturing tech
- Must be able to see and distinguish all colors and shades
- Basic understanding of several business systems/concepts such as Demand Flow, Statistical Process Control, Process Documentation, Empowerment, Six Sigma methods, Quality and/or Cost Improvement
- Must either have a current Department of Defense (DoD) Secret security clearance, or higher level, or have the ability to obtain a Secret security clearance, if a clearance is not currently held, the process will be started prior to the start date
- Computer competency in EXCEL, Word, Windows, MAXIMO or MP2, misc
- BS/MS/PhD student enrolled in a physical science or engineering program
- The successful candidate will be a resourceful problem solver with excellent interaction skills
4
Manufacturing Tech Job Description
Job Description Example
Our company is hiring for a manufacturing tech. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for manufacturing tech
- To generate documentation protocols and lead the execution of plant supporting studies and technical studies on the manufacturing floor at commercial scale
- To author and review IND, BLA and other technical documents for regulatory agency submissions
- Perform hands-on execution of manual and automated manufacturing operations
- Assist lead operator by leading a smaller team around pieces of equipment
- May act as a delegate to the lead operator in their absence
- Issues and risks
- Provide optimum advanced technology solutions and strategies through the effective management of people, systems, procedures and equipment
- Drive innovation and continuous improvement within Advanced Manufacturing Technology (AMT) by harnessing new technologies in the areas of systems, equipment, and processes
- Provide exceptional support to external and internal customers, team members, and shareholders
- Create technology roadmap for your Advanced Manufacturing Technology team
Qualifications for manufacturing tech
- Must have good written and verbal communication skills and understanding of current Good Manufacturing Practices regulations
- Must be able to operate and qualify for respirator usage
- Must demonstrate the ability to communicate engineering requirements accurately and concisely
- Must be highly organized and detail-oriented with a proven track record which demonstrates the ability to work well in a diverse team
- Join some of the brightest minds in the measurement world
- Two (2) year Electronics degree preferred
5
Manufacturing Tech Job Description
Job Description Example
Our growing company is looking for a manufacturing tech. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for manufacturing tech
- Drive continuous improvement through reporting, analysis and management
- Assess the adequacy of data gathering methods utilized by the AMT team
- Assure that procedures are efficient and work instructions are clear
- Establish new systems if/where possible
- May also perform the following tasks if assigned
- Accurately complete relevant paperwork following Good Documentation Practices / Good Manufacturing Practices guidelines
- Serve as a floor level point of escalation for manufacturing issues
- Coordinate department scheduling and staffing
- Coach floor level employees to utilize Specifications, Standard Operating Procedures, Job-specific training materials, Safety, and Good Manufacturing Practices to ensure the safety of our patients and employees and the manufacture of a quality product
- Supply components, small parts, equipment, tubing, to production areas
Qualifications for manufacturing tech
- Demonstration of electrical and mechanical skills during the interview ability to use associated equipment
- General knowledge of military specifications, engineering techniques, manufacturing and production procedures
- Stage ingredients (liquids and solids) and measure exact quantities
- Candidate must have at least 7 years of experience in semiconductor industry
- 2 years as a supervisor and 2 years as a recipe developer for ICOS CI-T53S and Takaoka MVI S9000 tools
- Auto-Cad, MS Office, JMP, Mentor Graphics, Workstream, SPC, and Statistics