Inspector Level Job Description

Inspector Level Job Description

4.9
180 votes for Inspector Level
Inspector level provides quality inspection criteria and/or customer requirements to the operator for the visual inspection of the product.

Inspector Level Duties & Responsibilities

To write an effective inspector level job description, begin by listing detailed duties, responsibilities and expectations. We have included inspector level job description templates that you can modify and use.

Sample responsibilities for this position include:

Provide data analysis to identify trends, assist in defect and turn back investigations, provide overall QA support
Support Quality Clinic activities repair, review and disposition
Utilize Relentless Root Cause Analysis (RRCA) methodologies to resolve escapes and obtain corrective action for non-conformances
Participate in Continuous Improvement Team (CIT) and SRR programs
Preparation of Failure Analysis reports of troubleshooting returned parts
Assists in training lower level inspectors
Perform site visits and field observations
Inspect parts to verify conformance to blueprint, engineering or other specifications
Input data to electronic records, search information, and perform material transactions via computer
Manage rejected materials in storage rack to isolate from acceptable parts

Inspector Level Qualifications

Qualifications for a job description may include education, certification, and experience.

Licensing or Certifications for Inspector Level

List any licenses or certifications required by the position: ASE, NITEC

Education for Inspector Level

Typically a job would require a certain level of education.

Employers hiring for the inspector level job most commonly would prefer for their future employee to have a relevant degree such as Associate and Collage Degree in Technical, Education, Associates, Engineering, General Education, Science, Construction, Industrial, Civil Engineering, Military

Skills for Inspector Level

Desired skills for inspector level include:

Gauging and inspection equipment
Measuring techniques
SPC and GDT
S.P.C
Historical records
Practices and procedures in quality control inspection field
Standard concepts
Labeling requirements
TS-16949
Applicable technical orders

Desired experience for inspector level includes:

Must be able to routinely grasp or handle objects, use finger dexterity, bend elbows / knees, and reach above / below shoulders
This classification activity, while principally accomplished in an office environment, does have duties that require frequent travel and require the individual to work outside the office environment
Ability to correctly use types of applicable equipment
Ability to read and interpret documents such as safety rules, Product Criteria, Assembly Release and Activity Instructions
Basic knowledge of hand measuring equipment (micrometers, calipers)
Possesses strong writing, research, and analytical skills, oral communication skills, and the ability to work independently

Inspector Level Examples

1

Inspector Level Job Description

Job Description Example
Our company is growing rapidly and is searching for experienced candidates for the position of inspector level. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for inspector level
  • Perform 100% inspection to separate nonconforming product as required
  • Inspect parts at work centers and machines when necessary
  • Tests metal objects to determine their degree of hardness, using hardness testing equipment
  • Positions workpiece on anvil of testing machine and turns controls to press steel ball or diamond point against surface of piece or to allow diamond-pointed hammer fall on surface to be tested
  • Measures diameter of indentation caused by steel balls, using microscope, or reads scale on test equipment that indicates depth of penetration of ball or diamond point, or calibrated height of hammer rebound
  • Reads hardness number from calibrated scale on equipment or converts scale reading to hardness number, using formula or conversion chart
  • May cut cross section of sample part and examine part under microscope to determine hardness depth
  • Maintain regular communication with administrative staff with reference to job status, progress, problems
  • Conducts basic testing (speedy moisture, moisture)
  • Operate inspection machines and read the results of the tests
Qualifications for inspector level
  • Minimum 10 years of DOD IG experience
  • A high school degree or equivalent with a minimum of 2 years’ experience as a Level II
  • Ability to read and interpret documents such as safety rules, product criteria, activity instructions and operational manuals
  • Ability to communicate and provide feedback to Metal Cell Operators on visual standards
  • Ability to learn Final Verify and Airflow
  • Employee must pass a forklift test, and retest every year
2

Inspector Level Job Description

Job Description Example
Our growing company is looking to fill the role of inspector level. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for inspector level
  • Maintain daily log books
  • Write testing procedures when applicable
  • Verify certifications from vendors
  • Comply with all departmental rules
  • Maintain measurement and test equipment as required
  • Utilize a wide variety of measurement and test equipment
  • Find and evaluate NDE findings per the appropriate Standard Operating Procedure
  • Receive training to learn how to properly inspect and route components for DCI (Disassemble, Clean and Inspect) and repair/overhaul under direct supervision at a basic level
  • Basic knowledge of the material ordering process
  • Basic knowledge of Inspection terminology
Qualifications for inspector level
  • Minimum of 2 years of experience as a Level II Inspector Inspecting usability of oilfield tubular & associated tools to all levels of DS1 specifications
  • Must possess, NACE Level II or Level III Certifications
  • Must be able to provide documentation of all academic and on-the-job experience hours from previous employers
  • Climbing ladders, working in confined spaces, pulling equipment up using ropes
  • Valid driver’s license, personal vehicle, and the ability to navigate to and through Brooklyn, Queens, and Staten Island, NY
  • Master of Science degree in forestry, arboriculture, horticulture, or related plant science field
3

Inspector Level Job Description

Job Description Example
Our growing company is hiring for an inspector level. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for inspector level
  • Basic knowledge of operation of precision tools and equipment to perform accurate dimensional Inspections
  • Use basic troubleshooting logic to identify defects in components
  • Perform basic SAP and SFDC transactions
  • Read and interpret technical documents and Part prints
  • Inspect and document the progress of the work at times appropriate to the construction so as not to impede the Contractor’s construction progress nor allow for an unreasonable amount of work to be performed without inspection
  • Shall work with the Client and Contractor to resolve any deviations, defects, or deficiencies observed in the work
  • Shall advise the client of deviations, defects, or deficiencies observed in the work that have not been corrected by the Contractor
  • Shall transmit to the client a notice of nonconforming work when it is the opinion of the Construction Inspector that such work does not conform to the requirements of the Contract Documents or permits
  • The ideal candidate will have strong verbal and written communication skills, be highly organized and capable of working in a diverse team environment and handling multiple tasks with competing priorities
  • The candidate must also have knowledge of basic construction standards and specifications
Qualifications for inspector level
  • Six (6) months of full-time professional experience in tree protection, pruning, installation and establishment, or other services that directly relate to the work of the contract
  • Must be able to read and understand blueprints, communicate effectively both verbal and written, understand basic math including fractions and decimals, basic understanding of computer workstations, ability to learn procedures and instructions, ability to retain knowledge, and analyze problems
  • Must have or be able to obtain a Security Clearance issued by the U.S. government
  • Applicant will be subject to a security investigation and must meet the eligibility requirements to obtain and maintain a security clearance issued by the US Government
  • In addition to the security clearance, this position will require an additional background screening for base access
  • Must be US Citizen according to ITAR regulations
4

Inspector Level Job Description

Job Description Example
Our innovative and growing company is hiring for an inspector level. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for inspector level
  • Enter collected data into database
  • Support the site by serving as a SME in mechanical or assembly inspections or as a CMM inspector
  • Evaluate non-conformance issues and provide feedback for corrective actions
  • Independently create AS9102 reports as needed
  • Preparing gages by identifying, setting and issuing for shop floor use
  • Calibrating gages per instructions and standards
  • Maintaining gage control database of calibrations records (internal and external)
  • Ordering new gages (replacements and new technology)
  • Repairing gages (internal and send to sub-contractor for repair)
  • Knowledge of electrical cables and harnesses a plus
Qualifications for inspector level
  • Candidates’ English skills must be proficient to understand, read, write and speak
  • Effectively handle lifting of various objects weighing up to 50 pounds
  • Must possess basic computer skills (Windows/Outlook/Excel)
  • This position requires successfully passing drug-screening procedures prior to being hired
  • Ability to achieve WIS Level I in 1 year
  • Full knowledge of T.O
5

Inspector Level Job Description

Job Description Example
Our innovative and growing company is searching for experienced candidates for the position of inspector level. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for inspector level
  • Support the Celina plant operations
  • Work through training in levels of NDEmethods
  • Ability to create, review, edit and documentNCR’s
  • Ability to read and understand welding blueprints
  • Understanding and application of manufacturing andinspection
  • Knowledge of proper inspection techniques required to obtain accurateresults
  • Perform dimensional inspection on precision machined products and assembliesunassisted
  • Will observe safe work procedures and conform to good housekeepingstandards
  • Performs other duties as assigned by the QC Supervisor or his/herdesignate
  • Ability to work well with others within and outside ofdepartment
Qualifications for inspector level
  • Fire proofing
  • A minimum of 1 – 3 years of experience in an industrial setting is a strong asset
  • Must have a valid driver’s license (Class 5 Minimum) or equivalent from another province
  • Previous NDE and dimensional inspection experience
  • Knowledge in reading and interpreting engineering drawings, material specifications and requirements
  • Ability to pass dimensional inspection training and testing

Related Job Descriptions

Resume Builder

Create a Resume in Minutes with Professional Resume Templates