Analysis Engineer Job Description
Analysis engineer
provides technical leadership for software projects and leads software supplier management activities Leads development, selection, tailoring and deployment of processes, tools and metrics.
Analysis Engineer Duties & Responsibilities
To write an effective analysis engineer job description, begin by listing detailed duties, responsibilities and expectations. We have included analysis engineer job description templates that you can modify and use.
Sample responsibilities for this position include:
Applies (as acquired via formal education or technical experience) standard practices and techniques in specific situations, analyzes and correlates data, recognizes discrepancies in results, and follows established procedures and operations through a series of related detailed steps or processes to derive a solution or conclusion
OProduct design and development
Participate in drawing/design approvals, including PCN
Participate in Team Feasibility Commitment
Support the Project Management in
Develop constructive simulations and analyses of airborne electronic warfare CONOPS and mission profiles utilizing accredited simulation systems such as ESAMS, Suppressor, AFSIM, Brawler, RADGUNS and
Validate airborne electronic warfare mission capability requirements and mission effectiveness
Maintain awareness of evolving national security challenges and threats which drive change and innovation in Electronic Surveillance (ES), ElectroOptical Surveillance Electronic Attack (EA), and related technology components for Information Operations (IO) capabilities
Analyze customer TACSITS and Mission Requirements and generate airborne electronic warfare CONOPS mission profiles, and functional requirements
Assist in the development of Electronic Surveillance, Electronic Attack, Intelligence Operations, Communications and Electro-Optical system models
Analysis Engineer Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Analysis Engineer
List any licenses or certifications required by the position: II, CAESAR, US, STK, FEA, CIP, CRE, CQE, ASQ
Education for Analysis Engineer
Typically a job would require a certain level of education.
Employers hiring for the analysis engineer job most commonly would prefer for their future employee to have a relevant degree such as Bachelor's and Master's Degree in Engineering, Science, Physics, Computer Science, Chemistry, Mathematics, Mechanical Engineering, Electrical Engineering, Education, Technical
Skills for Analysis Engineer
Desired skills for analysis engineer include:
Processes
GD&T requirements
Earned Value Management System and the development of program schedules
Software Configuration Management tools
C
Composite materials and manufacturing processes
Visual Basic
EDS
Structural mechanics and fatigue
Tools and languages
Desired experience for analysis engineer includes:
Develop white papers, proposals, and presentations for internal and external customers
Highly motivated, team player, fast learning skills, independence
Bachelor of Science degree in Mechanical(with strong Electronics knowledge), Electrical Engineering or equivalent
Strong technical background in mechanics, materials, acoustics, or electronic packaging preferred
Minimum 2 years of experience in electronic components or assemblies
High level analytical and problem-solving abilities are a must
Analysis Engineer Examples
1
Analysis Engineer Job Description
Job Description Example
Our company is searching for experienced candidates for the position of analysis engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for analysis engineer
- Simulate and evaluate performance of active and passive thermal control systems for future NASA vehicles and habitats including the Orion spacecraft and vehicles capable of lunar or Mars missions
- Correlate thermal models to test results
- Develop thermal models of space hardware or test equipment using Thermal Desktop analysis code and first principal models with standard desktop software
- Promote MBUSA’s reputation for cooperation and good corporate citizenship by assisting/supporting the FBI, local law enforcement agencies, NHTSA, when appropriate
- Failure analysis will be performed on failures from wafer fabrication or package assembly, reliability stress test failures, qualification fails, customer returns new product and process introduction fails
- This position involves the utilization of deprocessing analytical equipment including topside & backside decapsulation, layer by layer removal using wet and dry etching the use of analytical techniques including Scanning Electron Microscopes (SEM), Focus Ion Beam (FIB), Confocal Laser Scanning Microscope (CLSM), Photon Emission Microscopy (EMMI), Thermal Induced Voltage Alterations (TIVA), and Energy Dispersive X-rays (EDX)
- Responsibilities include the generation of high quality Product Analysis Reports to the internal engineering and manufacturing staff customers
- Must have detailed understanding of semiconductor physics, MOS & bipolar junction transistor theory of operation, and a detailed transistor level understanding of a variety of analog & logic circuits required
- Will drive quality improvement and provide corrective action recommendations conduct hands-on failure analysis activities
- Train others in physics of failure, analytical techniques and methodologies benchmark FA methods, systems and operations against other semiconductor manufacturers
Qualifications for analysis engineer
- Well versed with the various systems, tools, and procedures used in failure analysis
- Understand component SPECIFICATION and schematic diagram of the modular
- The applicant must have expertise in debugging using tools such as IDA, Softice, Ollydbg
- Strong knowledge of analysis flows and methodology
- Knowledge of all aspects of ASIC physical design including floorplanning, clock and power distribution
- Familiarity with package modeling techniques for chip level power analysis
2
Analysis Engineer Job Description
Job Description Example
Our company is growing rapidly and is looking to fill the role of analysis engineer. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for analysis engineer
- Create GT-Power engine performance models incorporating hydraulic valve actuation model of engine braking and Variable Valve Actuation (VVA) systems including effects of compliance and valve float
- Optimize system design for engine performance while meeting loading and cam kinematic constraints over the range of system operation and design tolerances
- Conducts process analysis work for quality control to maintain battery cell performance on safety and quality
- Analyzes and evaluates process input/output data to reduce defects and improve battery performance by
- Participates in the development and administration of technical procedures and training documents
- Provides complex analysis using high fidelity finite element analysis codes such as ABAQUS and ANSYS to model thermal and structural characteristics of materials, components and assemblies
- Predicts thermal, mechanical and structural behavior of materials, structures and assemblies used in visible and infrared detector systems and camera systems
- Conducts analytical and modeling studies of multi-scale and multi-physics problems
- Conducts research and engineering analysis involving characterization of materials (metals, ceramics, composites, ) for imaging systems at cryogenic temperatures
- Applies extensive technical expertise on a wide range of technical principles, theories and concepts from disciplines associated with thermal management, mechanical and fluid sciences
Qualifications for analysis engineer
- Circuit design background and hspice experience a plus
- Ability to conduct experiments in all phases of design, gathering and analyzing data
- 4+ years performing fault isolation on memory chips for failure analysis
- Master’s degree in Science Engineering, or equivalent
- We also invite associate level candidates to apply
- Continuous Improvement Process (CIP) certification
3
Analysis Engineer Job Description
Job Description Example
Our company is looking for an analysis engineer. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.
Responsibilities for analysis engineer
- Performs Steady State and Transient Thermal Analysis using ANSYS
- Performs bolted joint analysis problems by hand or with ANSYS
- Be responsible for creating CAE models from CAD surfaces/solids, perform analysis tasks according to internal methods
- Participate in Analysis methods development
- Have the own responsibility for analysis tasks within a project and propose solutions to solve products quality
- Be responsible to deliver optimized technical solutions
- Combine shared technology, common architecture, brand uniqueness to develop profitable products
- Work in global and multi culture environment
- Perform structural analysis on subsystems or composites and their installation
- Develop nuclear fuels and criticality analyses associated with core design, reload analysis and spent fuel
Qualifications for analysis engineer
- Past experience of signoff on successful chip tapeouts
- Green Belt certification, or higher
- Strong proficiency in engineering and design software
- Solid understanding of pump applications and types, in depth knowledge of hydraulic fundamentals and how these relate to pumps and pump systems
- Team-oriented, values communication and involvement of others
- Able to effectively self-manage and makes decisions around priorities
4
Analysis Engineer Job Description
Job Description Example
Our innovative and growing company is looking to fill the role of analysis engineer. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for analysis engineer
- Define data collection plan of air quality control system (AQCS) from operating plant in anticipating optimization opportunities
- Perform data analysis and develop analytics based on product know-how and operating data
- Program dynamic models that can continuously learn and predict
- Lead testing and field commissioning of the dynamic models
- Work with other discipline engineers to develop graphics and user interface
- Support to setup interfaces for remote monitoring of operating plants
- Periodically visit reference plants to get feedbacks and to identify new improvement opportunities
- Support team to convert product know-how into business opportunities
- Work with software developers to translate algorithms into commercially viable products and services
- Support team in developing automated engineering tools
Qualifications for analysis engineer
- Direct knowledge of analysis methodologies used in failure analysis for state-of-the-art semiconductor manufacturing
- At least 4 years experience utilizing FEM software, requirement capture and specification development – additional experience is preferred
- Familiar with mechanical design computational tools such as various CATIA v6, UG v5, and/or ProE
- Familiarity with programming language
- Experience with web driven infrastructure (Django)
- Identify waste and propose alternate design and process to Advanced Research & Development, Product Engineering, and Advanced Manufacturing Engineering all other functional groups in the organization as required
5
Analysis Engineer Job Description
Job Description Example
Our innovative and growing company is looking to fill the role of analysis engineer. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for analysis engineer
- Peer reviewing of other analysts work products, including efforts at other corporate business locations
- Under general supervision with limited review, this position is responsible for determining and developing effective approaches for resolving a wide range of difficult engineering problems
- Assignments are normally outlined in terms of overall objectives and anticipated results
- Work is reviewed at milestones or at completion for adequacy in meeting objectives
- May coordinate segments of a specific project and may have frequent inter- organization and customer contact on difficult technical issues
- Provides direction to design or technical staff and may provide direction to less experienced professional staff
- Develop constructive simulations and analyses of airborne electronic warfare and ISR concepts of operation (CONOPS) using tools such as AFSim, ESAMS, and Brawler
- Provide analysis to corroborate, verify, and/or validate mission model results
- Analyze customer mission requirements and generate airborne electronic warfare functional requirements based on models and simulations
- Maintain awareness of evolving national security challenges and threats which drive change and innovation in Electronic Surveillance (ES), Electro-Optical Surveillance, Electronic Attack (EA), and related technology
Qualifications for analysis engineer
- Extensive experience in AES, XPS, RBS, APT, FIB
- BS degree in Mechanical, Chemical or Aerospace Engineering from an accredited engineering school and ten (10) years of thermal analysis experience, or a MS degree from an accredited engineering school and eight (8) years of thermal analysis experience, or PhD from an accredited engineering school and four (4) years of related experience
- BS degree in Mechanical, Chemical or Aerospace Engineering from an accredited engineering school and five (5) years of thermal analysis experience, or a MS degree from an accredited engineering school and four (4) years of thermal analysis experience, or PhD from an accredited engineering school and zero (0) years of related experience
- Chemistry lab experience is a plus
- Direct hands on experience with Maxim products is a plus
- Sample cross-sectioning skills are a plus