Quality Assurance Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the quality assurance technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

  • Craft your perfect resume by picking job responsibilities written by professional recruiters

  • Pick from the thousands of curated job responsibilities used by the leading companies

  • Tailor your resume by selecting wording that best fits for each job you apply

NC
N Christiansen
Noel
Christiansen
81552 Ludwig Drive
Detroit
MI
+1 (555) 365 1217
81552 Ludwig Drive
Detroit
MI
Phone
p +1 (555) 365 1217
Experience Experience
09/2014 present
Chicago, IL
Senior Quality Assurance Technician
Chicago, IL
Senior Quality Assurance Technician
09/2014 present
Chicago, IL
Senior Quality Assurance Technician
09/2014 present
  • Provides guidance on inspection (audit) personnel on workmanship standards
  • Performs product audits in accordance with Rockwell Collins/customer/industry standards, reports results, assigns and monitors follow-up actions
  • Knowledge of Rockwell Collins Workmanship Standards
  • Provides support to manufacturing operations in the review of products and of engineering and manufacturing processes
  • Support Engineering Project Assistants (EPA) group with the following activities
  • Perform root cause/ corrective actions
  • Cooperation - Understands the value of cooperating with coworkers
10/2007 03/2014
Los Angeles, CA
Software Quality Assurance Technician
Los Angeles, CA
Software Quality Assurance Technician
10/2007 03/2014
Los Angeles, CA
Software Quality Assurance Technician
10/2007 03/2014
  • Assist with design documentation, configuration management and software deployment to support the system development life cycle (SDLC)
  • Assist software developers to develop test procedures and scenarios
  • Provide clear and concise documentation to support the system development process
  • Work with application developers to fix any identified problems
  • Reproduces and/or provides additional information on issues observed during test execution
  • Execute automated tests
  • Define testing methods and create test plans for application enhancement and modernization projects
06/2005 08/2007
Phoenix, AZ
Quality Assurance Technician
Phoenix, AZ
Quality Assurance Technician
06/2005 08/2007
Phoenix, AZ
Quality Assurance Technician
06/2005 08/2007
  • Perform and document periodic sanitation and safety audits and make recommendations to management for improvement
  • Perform, or assist in performing Internal Audits of Quality Management System processes
  • DEVELOP SELF AND OTHERS: Develop self and support others’ development to achieve full potential
  • Conduct line audits and process control monitoring to continuously improve housekeeping, safety, work practices, customer service and performance
  • Create and execute MPS objectives; meet MPS commitments and work within the guidelines of MPS
  • Assist management with development of departmental goals and objectives
  • Assist in the preparation and control of department expense budgets. Assist in the development of the capital budget
Education Education
Bachelor’s Degree in Food Science
Bachelor’s Degree in Food Science
University of Pittsburgh
Bachelor’s Degree in Food Science
Skills Skills
  • Ability to interpret drawings and knowledge of basic machining principles
  • The ideal candidate will be able to perform basic microbiological sampling & testing and basic wet chemistry titration
  • Solid organization skills, project management skills and ability to generate routine and non-routine reports
  • Ability to learn all functions of job within a reasonable amount of time
  • Excellent organizational skills and the ability to multi-task
  • A good understanding of the principles of quality systems
  • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations
  • Basic computer skills and knowledge of word processing and spread sheet programs very helpful
  • Ability to work in accordance with quality, safety, and sanitation standards, policies and guidelines
  • Ability to maintain professionalism in stressful situations
Create a Resume
1

Quality Assurance Technician Resume Examples & Samples

  • Conduct Quality Assurance on all incoming shipments prior to delivery from China
  • Analyze all ITS (intertech) results
  • Ensure all ITS reports are received in a timely manner from suppliers (7 days after PP approval)
  • Receive SRO audits reports and provide decision to field QA
  • Identify/target styles/factories to schedule SRO audits
  • Receive Agent and Factory audits reports and provide decision to agent and factory
  • Maintain QA results in TS for all PO’s
  • Process QA report card by vendor
  • Compare incoming reports to in house results
  • PP sample workmanship
  • 2-5 years related experience in quality assurance and testing
  • Good understanding of the role of QA in all phases
  • Excellent analytical skills, paying attention to detail
  • Multitasking & Priority Management skills
  • Excellent interpersonal and communicational skills, written and spoken (English and French)
  • Experience with Word and Excel
2

Quality Assurance Technician Resume Examples & Samples

  • Conduct quality audits on a daily basis
  • Inspect new tooling and fixtures before product use
  • Set up, issue and log gauge. Calibrate and enter into Gagetrak as required
  • Complete all necessary reports on a timely basis
  • Maintain all records by filing daily
  • Assist employees with quality related problems and resolution
  • Perform all tests and record appropriately
  • Provide SPC charts for job packets and log same when complete
  • Complete all forms required by customers
  • Provide training in measurement skills and SPC as required
  • Inspect and release incoming product
  • Maintain work instructions
  • Compile and analyze data as required
  • Work with engineering to disposition items that are suspect (rework & scrap)
  • Maintain QA Hold Area
  • Work safely at ALL times and comply with safety regulations
  • Keep work area, equipment, storage area, etc., clean and orderly at all times
  • Offer suggestions relative to improving work process, procedures, productivity, job safety or work environment
  • Perform other miscellaneous job duties and related functions as directed by Manager or other designated person
  • Assist in new product development (such a testing, ordering gauges and keeping up to date files on all testing)
  • Must perform as a team member with the willingness an attitude to work with others to resolve problems. Must also
  • Ability to use shop math and read various measurement equipment and blueprints
  • Computer and teamwork skills
  • Previous quality experience or education
  • Ability to work independently and make judgement decisions as to the quality of the product
  • Ability to work with limited supervision and support
3

Quality Assurance Technician Resume Examples & Samples

  • Evaluates and documents quality of finished goods and raw materials. Reports quality conditions as needed
  • Evaluates condition of the manufacturing facility and warehouse space to ensure compliance to regulatory and HACCP requirements. Audits programs in support of quality objectives
  • Maintains product quality through adherence to Good Manufacturing Practices (GMP) and Hazard Assessment and Critical Control Points (HACCP) guidelines, product specifications and quality procedures by monitoring and documenting compliance to quality parameters
  • Maintains regular and consistent attendance and punctuality
  • Regulated food manufacturing environment with familiarity of Good Manufacturing Practices (GMP) standards (1 year)
  • Scientific method and report writing (1 year)
  • Gathering, recording and reporting on operational and quality metrics, through manual or automated systems
  • Familiarity with American Institute of Baking (AIB), Good Manufacturing Practices (GMP), and Hazard Analysis and Critical Control Points (HACCP) standards
  • Basic skills in Microsoft Windows and internet applications
  • Ability to work in accordance with quality, safety, and sanitation standards, policies and guidelines
4

Quality Assurance Technician Resume Examples & Samples

  • Participate in continuous improvement programs and activities to ensure meeting of departmental performance objectives (See attached list of Performance Objectives)
  • Develop and maintain the control plan, TS-16949 procedures and work guidances for the Molding/Paint/Molding/Paint/Assembly/Sequencing Departments per TS-16949 and customer requirements
  • Prepares quality documentation and reports by collecting, analyzing and summarizing information and trends including failed processes, stability studies, recalls, corrective actions and re-validations
  • Train all Molding/Paint/Assembly/Sequencing Department personnel in the details of the control plan, customer quality specifications and quality expectations. Provide visual aids and/or work guidance instruction as required and document per TS-16949 requirements
  • Verify the execution of the control plan and work guidance instructions by production team leaders and team members through regularly scheduled audits of procedures
  • Communicate all Molding/Paint/Assembly/Sequencing Department control plans, customer specification and expectation changes to all production personnel
  • Coordinate with APQP, Engineering and Program Managers to ensure that all product specifications and customer expectations are current
  • Track, record and prepare capability and trend analysis of key product parameters. Establish benchmarks and control limits
  • Report any control plan deviations to the Customer Department Manager. Assist in the containment and disposition of the suspect material and the acquisition of a corrective action plan
  • Track, record and prepare management reports detailing key operational indicators (i.e. first time capability, scrap rate, premium freight, mislabeling, on time ASN transmissions, assembly related defects). Establish benchmarks and perform capability and/or trend analysis
  • Generate, distribute and document quality alerts as appropriate
  • Perform SPC analysis on critical characteristics documented within the Molding/Paint/Assembly/Sequencing Department
  • Maintain certificates and records necessary for test equipment to satisfy
  • Associate’s Degree required. Six years work related experience may be substituted in lieu of degree. Work experience combined with current schooling towards degree will be considered
  • Minimum of two years experience in quality assurance required
  • Updates job knowledge by studying trends in and developments in quality management systems; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations
  • Demonstrated strong written and oral communication skills (a must)
  • Must be computer literate in the Windows environment i.e. Word, Excel, PowerPoint
  • 15 pounds on a frequent basis and up to 40 pounds on an occasional basis,
5

Quality Assurance Technician Resume Examples & Samples

  • 2+ years of Quality Management experience on multiple product lines
  • Experience in Quality Planning, Project Management, Quality Control processes, Statistical Techniques and GMP
  • Solid analytical and research skills
6

W Quality Assurance Technician Resume Examples & Samples

  • Oversee all aspects of Webster EA toner QA laboratory
  • Work closely with QA staff, Engineering, Shift Leaders, and Process Specialists in a dynamic manufacturing environment (customer driven approach)
  • Execute analytical tests specific to EA toner manufacturing. Including; X-ray spectroscopy, particle size/shape, light microscopy, pH, conductivity, viscosity, moisture, measurements
  • Assess analytical results and disposition all outgoing materials
  • Position requires flexibility and willingness to work rotating shifts as required (4x7)
7

Quality Assurance Technician Resume Examples & Samples

  • Business Etiquette: Ability to communicate with others, via telephone or in person, in a professional and helpful manner while simultaneously building credibility and rapport. This includes the ability to understand, be diplomatic and tactful, demonstrate appropriate behavior in social situations and maintain composure in negative circumstances in order to achieve results
  • Database and System Knowledge: The knowledge and skills required to access and collect data via Company-approved databases or the Internet. This includes the ability to complete electronic forms, produce accurate reports, conduct investigative research, explain data and communicate results. This includes maintaining current knowledge and keeping up with new releases
  • Safety Procedures: Knowledge of and ability to proactively recognize and report safety issues or incidences and maintain a clean, safe work environment (e.g., customer safety, keeping work aisles clear, sanitary health practices, proper placement of tools and machinery, chemical storage requirements, chemical preparation procedures)
  • Ability to analyze data and reach valid conclusions during troubleshooting efforts
8

Quality Assurance Technician Resume Examples & Samples

  • Technology savvy
  • Flex PLM experience
  • Retail experience
9

Quality Assurance Technician, Manufacturing Resume Examples & Samples

  • Maintains a clean and organized working environment. Follows safety regulations. Participates in process improvement activities. Meets performance schedules
  • Participates in the maintenance and development of plant quality programs in support of HACCP. Provides training and education of quality-based programs to manufacturing partners
  • Operation of manual and automated analytical equipment (1 year)
  • Ability to read, write and understand polices, guidelines, specifications and safety standards
  • Ability to work independently and make decisions with minimal supervision
  • Mechanical/Technical Aptitude to troubleshoot minor equipment failures and make minor adjustments
  • Ability to perform basic math functions
10

Quality Assurance Technician Resume Examples & Samples

  • Work require 12 hour night shift on a 2-2-3 schedule. Some physical labor
  • Prepare samples and sampling plan for ingredients, intermediate or finished products, or other materials in order to perform analyses (e.g., chemical, physical, sensory, microbiological)
  • Prepare standards or standard curves to perform quantitative analyses
  • Interpret data from routine and non-routine analyses in order to validate that ingredients/materials meet specifications approve for shipment
  • Prepare beverages and conduct analytical tests and taste or odor tests according to sensory guidelines
11

Quality Assurance Technician Resume Examples & Samples

  • Perform sampling and physical, chemical, and microbiological testing of finished products and raw materials
  • Inspect finished products, raw materials, supplies, equipment, personnel, and facilities for adherence to quality specifications, current Good Manufacturing Practices, and sanitation
  • Manage product hold and release system
  • Identify non-conformances in quality or practices and take or recommend appropriate corrective action within scope of knowledge
  • Conduct all laboratory testing with accuracy and integrity and ensures that it is accomplished in compliance with all federal, state, and company policies and procedures
  • Operate, monitor, and control water process systems including Ultra-violet lights, ozonation process, Reverse Osmosis filtration process, distillation process, sub-micron filtration process, pumps, valves, instrumentation, and mineral mixing/addition process. Read gauges, meters, chart recorders, and controller readouts and record data
  • Prepare laboratory media and reagents
  • Transfer product testing results from paper records to system database (SAP)
  • Ability to read, write, and comprehend English
12

Quality Assurance Technician Resume Examples & Samples

  • Ensure quality at all phases in the process and product life
  • Raw material data, product test data, and quality documentation associated with internal plant and external testing
  • Investigate, communicate, and take corrective/preventative action when product does not meet minimum standards
  • Evaluate and maintain certification data for materials from vendor sources and internal SA semi-finished materials
  • Perform testing in conformance with defined test methods utilizing specialized and analytical test equipment
  • Perform and analyze data using defined computer software
  • May be called upon to perform or assist with in-process testing, and material analysis as needed to assist operations
  • Must be able to use and interface with basic and specialized computer applications
  • Interface with R&D and Marketing to assure all tests are completed to assure high quality standards are met for all produced products as well as new products purchased as finished goods
  • Must have basic knowledge of raw materials and raw material values
  • 3-5 years’ experience in Quality Control
  • Associates Degree or higher in Quality Control, Mathematics, Engineering, or Technical Sciences
  • Experience in ISO Quality Systems and Standards
  • Excellent judgment, decision making ability, and analytical skills
  • Strong teamwork and organizational skills
  • Must possess excellent communication skills
  • Strong computer skills including Excel and Word
13

Quality Assurance Technician Resume Examples & Samples

  • Able to work an eight (8) hour shift with overtime as required and work any shift as directed
  • Provide accurate inspection and testing of processed juice and related products according to Q.A. specifications
  • Test incoming concentrates and liquid sweeteners. Conduct water testing. Test in-process and finished products
  • Able to analyze and interpret results. Properly communicate lab results to appropriate production, Q. A., and warehouse personnel
  • Enter laboratory data into a computer and use business software. Properly identify and store samples
  • Become certified by the USDA to inspect and grade products and conduct plant sanitation inspections in accordance with USDA requirements
  • Report any variation or deviations to QA Supervisor or Manager, including QA Techs II & III
  • Prepare computerized or written reports
  • Walking or standing 75-80% of the time
  • Lift up to 45 pounds. Perform additional laboratory responsibilities as assigned. Perform all essential job skills (functions) affecting quality according to Integrated Management System procedures, work instructions and Company standards as identified for this position
  • Ability to see, feel and hear. Ability to read, write, speak, and comprehend English. Ability to understand and follow directions
  • Able to walk through plant pushing sample collection cart. Ability to climb steps and work at elevated areas in the plant
  • A minimum of two years of college courses in science and math, or five years of related Food Manufacturing experience in a wet chemistry/ laboratory environment conducting quality inspections
  • Go/walk into hot/humid environments and cold/freezing storage areas
  • Good organizational and mathematical skills
  • Able to use lab equipment safely. Able to taste, smell, and identify different colors and flavors, prefer with fruit beverages and juices. Ability to understand and recognize GMP issues. Good attendance record. Able to work with minimal supervision. Able to use a computer. Citrus / Beverage (Orange/Fruit Juices) Industry preferred
14

Quality Assurance Technician Resume Examples & Samples

  • Sampling
  • Preparation of sample labels
  • Sample preparation, including weighing, extractions, pH measurements, etc
  • Preparation of reagents (media)
  • Logging in of samples into LIMS or manual system which would include logbooks and the maintenance of control numbers
  • Performing and monitoring routine testing using laboratory instruments such HPLC, GC, FTIR, etc
  • Initiating investigations for non-conforming laboratory test results
  • Performing daily calibration/verification checks on laboratory instruments
  • Making and recording observations and calculations
  • Collecting and preparing data for evaluation
  • Archiving documentation on testing that has been completed
  • Performing other related duties as assigned by management
  • Maintain clean work area
  • Supporting laboratory housekeeping, environmental and safety initiatives
  • A minimum of a High School Diploma, GED required
  • An Associate’s Degree preferred
  • A minimum of 5 years of experience in a GMP laboratory environment performing progressively advanced duties at the Technician 2 Level required
  • Training in GMP and ISO requirements required
  • Ability to work 2nd shift, (typically Monday – Friday, from 2:45pm-11:15pm) required
  • The ability to work occasional overtime and off-shift hours, based on business needs, is required.Quality Control
15

Quality Assurance Technician Resume Examples & Samples

  • A minimum of a High School diploma, G.E.D. or equivalent required
  • A minimum of 1 year of Quality Assurance experience is preferred
  • Experience working in a Good Manufacturing Practice (GMP) environment preferred
  • Experience testing lab/manufacturing equipment preferred
  • Inspection experience preferred
  • Experience with inspection test equipment (i.e. Instron) is preferred
  • Basic computer skills required
  • Knowledge of JD Edwards (JDE), Laboratory Information Management System (LIMS) and Bluehill preferred
  • Knowledge of Microsoft Office (Word, Excel, Outlook) preferred
  • Knowledge of Quality Systems Regulations (QSRs) preferred
  • Quality Technician Certification (CQT) (ASQ or equivalent)
  • The ability to interact and communicate effectively with other functional professionals (i.e. Engineering, Operations) at all levels is required
  • Must be able to work 2nd Shift (3:00 pm - 12:00 am) and 1st Shift (6:00am – 3:00pm
  • The ability to work overtime, off-shift hours and holidays to support manufacturing business needs is required.Quality Control
16

Quality Assurance Technician Resume Examples & Samples

  • Assembles, operates and maintains complex laboratory equipment
  • Performs specified laboratory tests to ensure the data is conclusive in support of protocol. Verifies to ensure valid results are obtained
  • Investigates and writes out of specification reports, documents test results and procedures. Prepares graphs and charts of test data
  • Inspects, tests and/or evaluates the precision and accuracy of products, and/or testing equipment
  • Maintains all laboratory quality control records
  • Prepares chemical compounds, reagents and culture media and works safely in an environment with chemicals
  • Performs raw material, in-process and/or finished goods tests and reviews
  • Monitors and reviews environmental charts and/or numeric data
  • Performs chemical and sterility release of product
  • Performs sterility, environmental, moisture, residual ethylene oxide, and triclosan testing
  • Prepares media and performs quality assurance control checks per USP
  • Read and interpret results, performs trend analysis as required
  • Recommends, amends and analyzes sampling procedures, test methods, standard operating procedures, and/or inspection measures in order to lean processes or simplify current practices
  • Meets functional area goals and yearly strategic imperative project timelines
  • Utilizes Standards of Leadership and the Credo
  • Assures optimum control of quality so that raw material and/or finished products conform to existing requirements, standard operation procedures, and governmental regulations and adheres to all Quality Systems Requirements (QSR) and ISO standards
  • A minimum of a Associates’ Degree in the Sciences is required
  • A Bachelors Degree in the Sciences (Chemistry, Microbiology, etc.) is preferred
  • Knowledge of Microsoft Office Suite of programs and computer systems required
  • Statistical and analytical problem solving required; able to calculate time increments
  • Must be able to speak, comprehend, and write English
  • Must be able to work 2nd Shift (Monday – Friday 3:00pm - 12:00am) with the possibility of working Tuesday – Saturday
  • Must be flexible with a variety of working situations/shifts, working overtime, weekends, and select holidays.Quality Control
17

Software Quality Assurance Technician Resume Examples & Samples

  • Configure test setups and execute test procedures
  • Builds/configures test setups as per test procedures
  • Executes test procedures as per project schedule
  • Submits test results to Software QA analyst
  • Submits, and retest defects in a timely fashion
  • Maintains lab environment and equipment
  • Interfaces with external groups and/or functions
  • Reproduces and/or provides additional information on issues observed during test execution
  • Identifies and resolves problems
  • Fact finding and analysis is limited as information is readily available; solves problems following clearly established standards and procedures
  • College degree (DSC) in electronics, computer science or equivalent
  • Effective English communication skills, oral and written
  • Well developed interpersonal skills
  • Understanding of electrical and electronic circuits
  • Understanding of SQA concepts, processes
18

Quality Assurance Technician Resume Examples & Samples

  • Science degree in Analytical Chemistry or Related Discipline, or Food Technology
  • 5 years + Quality Control experience preferred in a manufacturing environment, with process control or food/beverage analysis experience
  • Previous experience with analytical test equipment is preferred, i.e. HPLC, GC/FID
  • Knowledge of packaging environment (preferred)
  • Root Cause Problem Solving skills
  • Ability to prioritise and meet deadlines
  • Familiarity with HACCP, GMP, quality systems, and food safety guidelines
19

Operational Quality Assurance Technician Resume Examples & Samples

  • Execute inspections at various points in the value chain
  • Reports and documentation related to the inspections
  • Raise non-conformance reports in the ERP-system
  • Initiate and support prioritization of problems and problem solving process
  • Support Feedback to Workers in case of mayor or recurring quality problems
  • You hold a High school or Technical diploma coupled with work experience
  • You have understanding of basic Quality skills (standards, tools…), documentation control, configuration management, change management
  • Your CWI certification is an important asset
  • You have good knowledge of the relevant ERP/SAP Systems
  • You have understanding of product and logistic requirements
20

Quality Assurance Technician Resume Examples & Samples

  • Experience using tools like Excel Macros, Sharepoint or Acess to enhance testing process
  • 4-7 Years of related experience, in both mainframe and distributed applications in the financial services industry
  • Strong Test Management experience at a program level including managing multiple project test streams at the same time
  • Strong understanding of banking software and systems
  • Preferred: experience with HP ALM (Application Lifecycle Management) Testing Platform
  • Strong background and experiences working with strategic and global sourcing models for testing and working with blended and matrixed teams
21

Quality Assurance Technician Resume Examples & Samples

  • Assessing, maintaining, and assuring control of processing equipment, measurement equipment, and measurement data with respect to standards, specifications, and procedures
  • Maintenance/calibration of related equipment with respect to standards, specifications, and procedures
  • Verification of all incoming raw materials for compliance to established specifications
  • Testing of finished product during and after production, which includes the ability to accurately read tolerance gauges, meters and tape measures and document results
  • Documenting and communicating test results
22

Quality Assurance Technician Resume Examples & Samples

  • 2 year technical degree or equivalent combination of education and experience
  • General knowledge of Agilent manufacturing processes required
  • Knowledge of ISO 17025 standards preferred
  • Basic PC skills along with Microsoft Office suite of products (Excel, Word, PowerPoint and Technical training certification is required
  • Experience and/ or familiarity with SAP Quality Module preferred
23

Quality Assurance Technician Resume Examples & Samples

  • Lead problem solving activities in a cross-functional setting
  • Contributes to assembly problem-solving and quality criteria documentation
  • Processes documentation of nonconformities
  • Handles line rejects and nonconformities
  • Answers line requests
  • Follows up with suppliers including root cause analysis and corrective action
  • Participates in improvement projects
  • Travel to supplier site(s) as required
  • College diploma in mechanical or industrial technology, quality control or related area preferred
  • 5 years of experience in quality assurance in a manufacturing environment preferred
  • Knowledge of the ISO 9000 standard
  • Knowledge of measuring instruments (vernier, micrometer)
  • Functional knowledge of Microsoft Office Suite
  • Ability to travel as required, including to Canada
  • Ability to work well under pressure, autonomous, team player, sound judgment and effective communication
  • Knowledge of problem solving methodology
24

Quality Assurance Technician Resume Examples & Samples

  • Performs in-coming and in-process inspections of parts, materials and equipment according to Engineering specifications and drawings
  • Prepares inspections reports, affixes acceptance tags / labels / stickers and repacks parts to ship
  • Performs in-process inspections, including source inspections to determine adherence to standards, specs, drawings, and other QA procedures
  • Audits shipments to determine compliance to customer orders and/or contractual requirements
  • Supports manufacturing to achieve and continuously improve the quality of processes and products
  • Follows up on customer complaints and occasionally assists with field repairs and rework which may require out-of-town travel and extended stay
  • Uses various inspection equipment and measuring instruments to check quality again engineering drawings, specs, and standards. Maintains calibration database on computer
  • Completes and maintains required paperwork, documents all tests, inspections or audits according to QA procedures
  • Maintains good housekeeping and follows established safety procedures
25

Quality Assurance Technician Resume Examples & Samples

  • Determine the schedule, perform audit on vehicle and assembly process, produce the report, ask for corrective actions and do follow-up
  • Participate in the development of processes, procedures, instructions, forms related to the quality assurance department
  • Perform test and analysis to verify the product conformity
  • Produce statistical reports from different data, interpreting and presenting the results, propose solutions
  • Support ISO certification activities
  • Support the problem solving process to get the correction action from Quality assurance process
  • Train employees in activities related to their work and, at the request of the immediate supervisor
  • Lead by example, demonstrating a consistent and professional manner
  • Participate in creating and maintaining a team environment with all levels in the organization
  • Must be tactful, diplomatic and have effective verbal and written communicative skills
  • Must possess strong communications skills; capable of representing the organization to customers, suppliers and other company leaders
  • Experience working in a team-based environment; coaching skills preferred
  • Experience with Lean Manufacturing and Continuous Improvement processes
  • Knowledge of calibration processes and metrology
  • Functional knowledge of MS Office
  • Ability to work well under pressure, autonomous, rigorous, methodic and sound judgement
26

Quality Assurance Technician Resume Examples & Samples

  • Ensure internal audits are conducted of actual practices against published policies, standards, procedures, regulatory guidance, contract and processes
  • Ensure audit findings are correct and that recommendations for corrective and/or preventive action(s) are appropriate and conform to quality standards
  • Ensure corrective action and preventive action submitted by site meet requirements
  • Prepare trend analysis reports of various quality indicators as required by Company Quality Management System
  • Maintain site Quality Board to ensure data is updated and correct
  • Ensure cross-tell is being conducted between shops and sites for non-conformances
  • Monitors workshop practices and housekeeping to identify discrepancies and negative trends that affect technical performance
  • Coordinates with other departments for standardization of processes and procedures
  • Perform all duties in accordance with DynCorp ISO 9001 Quality and Safety Standards
  • Perform other qualified duties as required
  • Able to successfully pass an Internal Auditor course
  • Working knowledge of Training and Instructional Techniques
  • Previous experience with US Army Technical Order and publications systems
  • Ability to interpret and implement procedures for compliance with ISO 9000 Standards and contract SOW
  • Familiar with OSHA Standards and Industrial safety practices
  • Capable of producing Analysis Reports, Point papers and Spreadsheets using Microsoft Office
  • Ability to communicate professionally, written and verbally, in English
  • Able to obtain host nation driving license
  • Two (2) years’ experience in a Quality Assurance or Quality Control is required
27

Quality Assurance Technician Resume Examples & Samples

  • 2+ years quality assurance testing in a technology industry or equivalent
  • Bachelor’s degree with concentrations in computer science or other technical field required
  • Excellent testing skills
  • Ability to showcase programming knowledge in debugging issues and identifying the area where bug lies
  • Strong communication skills; the ability to partner with internal team members effectively
  • Comfort working with a broad range of technological productivity and work-flow management tools including SharePoint, Excel, and Word
28

Quality Assurance Technician Resume Examples & Samples

  • Carry out the meat sampling for E. coli O157:H7 testing
  • Perform boneless meat monitoring at the trim collection stations based on procedure for boneless meat inspection
  • Perform pre-operational inspections such as walk through and visual inspection
  • Coordinate QA activities supporting production needs
29

Quality Assurance Technician Resume Examples & Samples

  • Assists engineering in providing manufacturing support by learning to analyse data and identify manufacturing issues and trends. May also train operators on basic processes and engineering changes, and perform operator certification on-the-job training and testing
  • Assists in identifying manufacturing issues by working with engineering to determine root cause and implement corrective and preventative action
  • Learns process to disposition non-conforming material by utilising quality tools and by developing knowledge of manufacturing practices and procedures
  • Helps to develop and implement process improvements by assisting engineering in researching and validating changes in processes/equipment and test methods to improve yield and/or reduce cycle time per established procedures
  • Assists engineering in supporting process development during new product introduction by providing input to traceability and inspection requirements, providing input for statistical process control criteria, developing manufacturing instructions, and creating training sheets and certifications
  • Assists engineering with qualification and validation studies and reports by collecting, compiling, measuring, organising and recording data, and by writing procedures. May keep lab notebook
  • (Experience/Education) National Framework of Qualifications (NFQ) level 6 qualification in a relevant discipline. 2+ years of related work experience, or an equivalent combination of education and work experience
  • (Technical/Business Knowledge (Job Skills)) Applies broad knowledge of general technical concepts and practices and a general understanding of product or systems fundamentals. Utilises increased knowledge of numerical and statistical data and computer software programs to resolve non-routine/moderately complex problems. Will perform this job in a quality system environment
  • (Cognitive Skills) Performs non-routine to moderately complex technical assignments using standard methods and sequences. Performs set-up, testing, repair, inspection, and/or maintenance of all area-specific equipment, materials, systems, and/or product. Makes adjustments, modifications, and replacements as directed. Assignments require broad judgment in troubleshooting proven processes as well as the ability to suggest alternatives
  • (Communication) Regularly presents findings to cross-functional teams and begins to win support for ideas. Can adequately write procedures and product disposition documentation that may be presented to external auditing bodies
  • (Influence/Leadership): Mentors new team members. Ensures open communication within group and across shift and relevant functions to resolve technical issues and promote learning
  • (Planning/Organisation) Plans, organises, and prioritises own daily work routine to meet established schedule
  • (Decision Making/Impact) Solves a variety of problems of limited to moderate scope and complexity requiring basic interpretation of defined procedures and practices. Maintains confidentiality in handling sensitive information or documents
  • (Supervision Received) General supervision. Receives general instruction on routine work and detailed instruction on new assignments
30

Quality Assurance Technician Resume Examples & Samples

  • Performs over-inspection of parts prior to shipment rejecting unacceptable parts
  • Maintain the MRB system
  • Process all returned castings
  • Maintain up-to-date documentation and procedures
  • Process all castings into and out of the MRB crib, updating logs/paperwork as necessary
  • Carry out hands-on duties in assigned areas, such as segregating non-conforming parts into categories, over-inspection of parts, and submitting parts to the MRB crib
  • Generate written reports as required
  • Perform periodic product integrity audits and customer audits per schedule/requirements
  • Assist in corrective action investigations as needed
  • As assigned, verify MES parts cast matches cast logs, work with Alloy Procurement Specialist as needed
  • Performs other work related duties as assigned
  • Physical Demands
  • Lifting intermittently of various items. Typically, assistance would be provided for weights exceeding 35 pounds
  • Good manual dexterity to operate computer equipment and precision measuring instruments
  • Oral communication via telephone or in person while interacting with customers, suppliers, or other employees
  • Standing intermittently
  • Visual monitoring of computer screens
  • Visual inspection and review of products for compliance to specifications
  • Visual viewing of processing equipment, precision measuring instruments, prints, reports, manuals, procedures and an assortment of printed items
  • Visual requirements for this position are close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
  • Equipment Used
  • Office equipment, computer, inspection tools (calipers, various gauges, etc.)
  • Work Environment
  • Contacts
  • A minimum of a High School diploma or GED equivalency is required
  • 3 years of quality related experience is preferred
31

Quality Assurance Technician st Shift FAB Resume Examples & Samples

  • Must be able to read/write/speak English
  • Must know basic math (add, subtract, multiply, divide, fractions, etc…)
  • Must be able to deal with conflict
32

Quality Assurance Technician Resume Examples & Samples

  • Receiving Inspection of incoming products according to AQL sampling and inspection plans. This may include assembly of bicycles and other products. This will include complete function testing as well as appearance criteria evaluation. Includes reporting of results to appropriate people and basic report summaries by supplier
  • Assist in disposition, reporting and managing of rework for any identified non-conforming material found during inspections or notified from another source
  • Lead investigations of quality issues reported from all sources such as customer service, warranty and suppliers. This will include coordinating problem resolution
  • Develop rework instructions and verification of rework for quality issues as needed
  • Perform failure analysis on suspect defective products, sample evaluations and packaging improvements
  • Perform more advanced internal process audits and process development
  • Support Quality Supervisor in reporting and communication of issues to suppliers’ as well as CAR/PAR process and verification of effectiveness
  • Perform detailed product inspection and testing as needed to applicable regulations and standards for all product categories. This may include packaging reviews and drop testing, and will include the evaluation and testing of all new product development (NPD) and Incoming Quality Control (IQC) quality reports. Follow up to resolution of issues will be included
  • Quality data collection, report generation and summaries as needed
  • Performs other duties as assigned by supervisors and managers
  • Follow internal controls and company policies as set by Pacific Cycle and job function
  • Contribute to the success of Pacific Cycle Inc. by leading or assisting with other projects and tasks as assigned
  • Assist in Cycle Count process within SAP and validate accuracy of cycle counts
  • Report all discrepancies that have been entered into SAP immediately
  • Monitor all activities in SAP to insure all cycle counts transactions are done properly and completely
  • Notify the Supply Chain Manager and the Distribution Manager of all un-reconciled discrepancies
  • Cross Train in all Cycle Count processes and reporting requirements as directed
  • Technical aptitude - ability to provide diagnostic/operational evaluation of bicycles, joggers, ERO Toys and P&A products
  • Ability to work well without direct supervision
  • Competent with MS Office, Word, Excel and Outlook
  • Basic QMS software experience
  • Root cause and problem solving skills
  • Organized and attention to detail
  • Minimum 1-2 years previous quality assurance experience
  • Lift and move a minimum of 50 pounds without assistance
  • Able to sit or stand for long periods of time in a warehouse environment where it is cool and noise level can be moderate to high
  • Knowledge of Quality Management System Requirements
  • Knowledge of CPSC, EN and other regulations related to our product lines
  • Knowledge of warehouse layout and processes for obtaining units for review
  • Ability to operate a fork lift
33

Quality Assurance Technician Resume Examples & Samples

  • Under direction, facilitates development of a quality assurance program and overseas inspection/corrective action plans that meet or exceed maintenance and supply standards
  • Performs quality assurance for all work performed within assigned mission areas
  • Inspects work in progress and record observations. Prepares corrective action plans based on data, observations, and reports
  • Submits recommendations for any required training to improve quality control processes or skills to correct identified deficiencies
  • Candidates must be in top physical shape, meeting the government deployment requirements
  • Position requires moderate to lengthy travel to various US or OCONUS locations. Appropriate bonuses and allowances are paid. We seek flexibility and willingness to deploy to all/any of these locations, including Southwest Asia and South Central Asia. Some OCONUS deployments may be to risky hostile ("war zone") environments which earn larger bonuses
  • Qualify for a Government issued CAC
  • Pre-employment drug screening
34

Quality Assurance Technician Resume Examples & Samples

  • Assures inspections and testing of components, subassemblies, finished product, and incoming materials conform to specifications, and are completed in an accurate and timely manner
  • Conducts and documents First Article Inspections (FAI), in- process , and finished product inspections to determine if products are in compliance with specifications
  • Performs measurements related to process validations and process capability studies
  • Maintains records of inspection results, certificates or conformance, and other documentation related to work orders
  • Manages the Discrepant Material Report (DMR) database for defective material and assemblies, ensuring compliance with the Non-Conforming procedure. Tags and isolates non-conforming parts and performs required inventory control transactions
  • Understands and works toward Quality objectives; continually optimizes the inspection process by identifying Quality bottlenecks that hinder Production
  • Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards
  • Administers the Calibrated Equipment program for R&D lab and production equipment. Coordinates with external vendors to schedule and complete calibration of equipment and ensure compliance to due dates
  • Serves as back-up and support for the shipping and receiving function. Performs production shipment to customers and receipt of incoming purchase orders when required
  • Minimum of three (3) years’ experience in manufacturing/operations environment
  • No relocation benefit is being offered for this position. Only candidates that currently reside within the immediate geographical area of Tualatin, OR (50 miles) will be considered
  • Ability to lift 25 lbs. frequently and up to 50 lbs periodically
  • 1 year of experience in a quality role in a manufacturing environment is preferred
  • Ability to read and understand drawings/blueprints including geometric dimensioning and tolerancing (GD&T)
  • CMM or MicroVu experience
  • Experience in an electronic manufacturing environment preferred
  • Familiarity with the requirements of ISO and TS16949
  • Capable in operating hand tools and various gauges such as pin gauges, micrometers, calipers, and all other devices used to determine product acceptance
  • Experience working with inspection plans, SPC charts, routers, and process sheets
  • Experience and demonstrated proficiency with IPC-A-610, or J-STD-001
35

Quality Assurance Technician, Nights, PM Resume Examples & Samples

  • Analyze incoming ingredients, blends, and finished product for Brix, acid, flavor, color, pulp, taste, oil, ascorbic acid, foreign material, etc. as per specifications
  • Perform microbiological analysis on finished product and incoming ingredients
  • Receive and analyze incoming sweeteners
  • Collect micro and shelf-life samples
  • Monitor and inspect production lines to ensure that quality and package integrity are within specifications
  • Verify that product codes, labels, cases, cartons, cans, bottles, packages, sleeves, seals, and shrink-wrap are correct
  • Check fill temperatures, fill weights, and fill heights of finished product
  • Perform complete package quality inspections as required
  • Complete all documentation associated with quality checks
  • Keep accurate QS reports daily
  • Ability to research historical data when required and report findings
  • Communicate technical and analytical data using reports, charts, graphs, etc. as required
  • Prioritize assignments and independently manage time to satisfy business needs
  • Demonstrate an understanding of EtQ software and generate corrective action requests and document change requests
  • File QS and Production generated paperwork
  • Place raw materials and finished product on hold
  • Monitor sorting of hold product as needed
  • Monitor all quality checks performed by production
  • Set up analytical equipment and perform required daily calibrations
  • Use SPC control charts
  • Prepare standard solutions and reagents
  • Utilize proper chemical handling procedures
  • Maintain laboratory supply inventory
  • Monitor and inspect sanitation activities
  • Analyze CIP and acid sanitizer solutions
  • Maintain equipment and area cleanliness to ensure compliance with all GMP standards
  • Assist blenders as required by the Team Leaders
  • Ensure compliance with all CCNA policies and procedures
  • Participate in the CCNA quality improvement process and the implementation of TCCQS as required
36

Quality Assurance Technician Resume Examples & Samples

  • The Quality Assurance Technician will support the implementation and enforcement of the Quality and Food Safety Management System requirements throughout all of the manufacturing process in order to ensure compliance with company policies, FDA cGMP, and Industry standards
  • Responsible for daily QA function within a food processing plant. Must be detail orientated and can perform various quality inspection duties, document results and assist in determining corrective action. Promote Quality and Food Safety awareness and commitment
  • Communicate and work with other departments to support Quality and Food Safety and continuous improvement programs related to the quality system. Support the development and delivery of training. Pre-operational sanitation checklist for Plant areas and equipment
  • Perform operational food safety / sanitation checklist for Plant areas and equipment as required
  • Daily, Conduct Pre-operational, changeover inspections of equipment and areas in regards to cGMP, housekeeping, product changeover and sanitation activities. Clean and sanitize QA equipment and areas. Notify management of non-conformance issues. When product is found to be out of specification, put product on HOLD following SOP
37

Quality Assurance Technician, Sparwoood, BC Resume Examples & Samples

  • Coordinates and maintains the Joy Global Canada Quality Control program and manuals
  • Conducts inspection of individual scope of work in progress and at completion to resolved repetitive rework and determine root cause
  • Perform UT and Mag Particle inspections of rebuild components, including professional reporting of the results
  • Perform audits for machine and component rebuilds using iAuditor
  • Responsible for quality control inspection for machine overhauls, including labeling, inspecting and final reporting
  • Coordinates, compiles and files all documents from the various projects and ensures that all requirements of the Quality Control program are completed in a timely manner
  • Coordinates document and quality control to ensure quality assurance goals are maintained
  • Assists in determining processes and process improvement
  • Executes the inspection and signoff of projects and worksheets
  • Documents processes to ensure overall project consistency
  • Maintains relationships with third party inspectors
  • Controls all welder records and logs and verifies welding is completed as per approved CWB
  • Provides quality control updates at production meetings as required
  • Complies with standards and procedures of the Joy Global Health and Safety manual and Occupational Health and Safety regulations
  • Journeyman Trade certificate or equivalent experience with practical knowledge of supervising welding/fitting operations. Red Seal ticket preferably in welding
  • NDT Level II in UT and mag particle
  • CET (welding) or equivalent experience
  • Possesses conversant knowledge of CWB requirements
  • Possesses the ability to interpret engineering specifications
  • Ability to provide accuracy and detail in projects and reports
  • Possesses intermediate computer skills, specifically with MS Office
  • Ability to work effectively with team members and yet be independent and self-reliant when completing tasks
  • Demonstrates interpersonal skills, ability to work in a multi-disciplinary environment
  • Demonstrates initiative and is a proactive problem solver
  • Ability to establish and maintain cooperative working relationships with others
  • Demonstrates efficient organizational skills and the ability to thrive well in a deadline oriented environment
  • Ability to prioritize and execute multiple tasks quickly
  • SAP (preferred), Excel, Word, eMail knowledge required
  • Valid driver’s license is required
38

Quality Assurance Technician Resume Examples & Samples

  • Performs mechanical inspection of machined parts and completed precision assemblies to determine precise conformance to specifications, tolerances and standards
  • Provides product technical support to manufacturing, marketing and Engineering
  • Minimum 10 years of experience inspecting, and testing high precision parts of which two to three years are working independently to determine method of inspection to be used and making complex set-ups. or
  • ASQ Certified Quality Inspector or equivalent certification with 6- years’ experience inspecting and testing high precision parts of which two to three years are working independently to determine method of inspection to be used and making complex set-ups
  • High School Graduate or Equivalent with some formal QA training
  • Supervisory experience desirable
  • Good oral and written skills to effectively communicate complex technical issues
  • Good analytical & troubleshooting skills
39

Quality Assurance Technician Resume Examples & Samples

  • 2+ years of related experience required
  • 3+ years of inspection experience in a precision machining and medical device inspection environment preferred
  • Optical Comparators experience required
  • Blue print interpretation skills and a working knowledge of GD&T (Geometric Dimensioning and tolerance) applications required
  • Working knowledge of various applications of shop mathematics preferred
  • Working knowledge of CMM (Coordinate Measurement Machine) inspection and programming preferred; CMM experience on Zeiss is a plus
  • Excellent written, oral communication, organization skills required
  • Computer proficiency required including basic MS Office proficiency
  • ASQ Certification preferred
  • Must be able to work overtime on an as needed basis, which may include nights and/or weekends
  • Must be willing and able to meet the physical requirements of the job which includes: speaking, hearing, standing, walking, sitting, using hands to finger, handle or feel; Specific vision abilities sometimes used in this job include close vision, peripheral vision, depth perception, and ability to focusQuality Control
40

Quality Assurance Technician Resume Examples & Samples

  • Computer Science Degree or related field
  • Minimum of 4 years of software testing (via building automated test software)
  • Experience in QA Methodologies
  • Experience with scripting languages plus (Perl/Ruby/Python, JavaScript, etc)
  • Strong analytical, troubleshooting/problem solving skills are required
  • Knowledge of HTML, CSS, JavaScript, XML, and web client technologies
  • Knowledge of software life cycle
41

Quality Assurance Technician Resume Examples & Samples

  • Experience working with HBSS/ACAS
  • Experience in DoD working environment
  • Moderate understanding of IT project management and IT operations
  • Knowledge and experience working with REMEDY ticket tracking system
  • Knowledge and experience with Crystal Reports
  • Knowledge and experience of IT Service Management (ITSM) suite
42

Quality Assurance Technician Resume Examples & Samples

  • QA support for product release
  • QA support for registration activities of regulatory documentation
  • Support the Compilation of QA Monthly Reports
  • Conducting QA activities including relevant enterprise resource planning (ERP) system and the
  • High School Diploma/ Certificate or relevant work experience
  • Knowledge of relevant Excel / Word packages and familiarity with Electronic Management
  • Highly organized and motivated
43

Software Quality Assurance Technician Resume Examples & Samples

  • Define testing methods and create test plans for application enhancement and modernization projects
  • Ensure that software adheres to company standards
  • Work with customers, users, and other stakeholders to identify test cases
  • Work with application developers to fix any identified problems
  • Document test results and respond to questions from business and IT team members
  • Experience working on project teams
  • Knowledge of healthcare reimbursement a plus
  • Experience working in a professional software quality assurance role preferred
  • Proficient with Microsoft Excel 2007 (and beyond) a plus
  • Experience using Agile SDLC a plus
  • Knowledge and experience using third-party software quality assurance tools a plus
44

Quality Assurance Technician Resume Examples & Samples

  • Understands and applies Good Manufacturing Practices for the care, handling, and storage of food products; and report any known or observed violations to management. Utilize HACCP protocols in everyday work routine to ensure adherence to HACCP plan, oPRPs, and Pre-Requisite programs (PRPs)
  • Performs production room and equipment pre-operational inspections and sanitation verification
  • Performs environmental sampling of the facility including air and water sampling, and swabbing of equipment, allergens, and non-process areas
  • Assembles and reviews production batch records for QA approval, ensures adherence to the HACCP plans, and works with production team members as directed to correct and prevent errors
  • Supports internal audits for GMPs and PRPs, including performing glass and brittle plastic inspections and GMP inspections
  • Supports QA training programs, including scheduling, promotion, creation and review off quizzes, and tracking and reporting of completion
  • Supports the maintenance of the documentation and record control, including review and archival of records, including review and archival of inspection, sanitation, and calibration records
  • Promotes adherence to Quality and Food Safety programs and communicates changes to plant staff and operators
  • Assist Quality Assurance efforts by being responsive to any problems relative to Quality and Food Safety and quickly and efficiently alleviates and reports difficulties as necessary
  • Participates or contributes to QA and Food Safety Team efforts by providing input and tracking data
  • Participates in QA team meetings to help outline work schedules and priorities
  • Assists in recommending and ordering supplies
  • Backs up team mates on other duties or other shifts when needed
  • Attend internal/external/online trainings as required to acquire or maintain qualifications
  • Comply with all Company policies including, but not limited to, policies, procedures, and guidelines regarding Safe working practices and a drug free work place, as well as DuPont’s Quality and Environmental Policies and procedures
  • Should have at least 2 years of related work experience and possess a minimum of an Associate’s degree or equivalent in Microbiology, Biology, Biotechnology, or Food Science
  • Must have the ability to work as an active team member, as well as independently
  • Must have strong math and good communication skills (both verbal and written)
  • Should have experience in a manufacturing facility with some fundamental knowledge of Quality Assurance, experience with Management Systems such as ISO 9001, and working knowledge of HACCP food safety programs
  • Experience in manufacturing of dietary supplements and pharmaceutical products is preferred
45

Software Quality Assurance Technician Resume Examples & Samples

  • Maintaining the Lab executing automation tests
  • Execute automated tests
  • Maintain the lab inventory
  • Bring up autiomation test beds supporting the automation framework
  • Review product user interface for conformity to isolate infrastructure dependenicies
  • Interpret and report testing results, and be a vocal proponent for quality
  • Work with Quality Assurance Engineers to understand the overall technical architecture and how each automation feature is implemented
  • 2 year technical degree (preferably Engineering or Telecommunications)
  • 2+ years of experience in a Consumer Electronics lab environment
  • Experience planning and maintaining lab facilities for optimal efficiency and creating new processes when necessary
  • Excellent and proven Troubleshooting skills – specifically in the following areas: Wi-Fi, Switch, Router
  • Experience in Linux environment. (Preferred: Ubuntu)
  • Scripting experience using Python, shell script
  • Familiar with Jenkins build Automation Environment
  • Understanding of networking
  • Previous roles in QA or QA Automation a plus
  • Certifications: Network+ or equivalent experience
46

Quality Assurance Technician Resume Examples & Samples

  • Sets up, adjusts, and operates equipment
  • Cleans and sterilizes equipment
  • Perform Temperatures on products, Trailers and Coolers
  • May require availability outside of normal scheduled work hours
  • Monitor and enforce Policy and Procedures according to guidelines in all Processing areas
  • Perform daily data entry
  • Maintain high standards of accountability and responsibility
  • Punctuality and attendance is essential for this position
  • EDUCATION: Requires High School Diploma or equivalent, additional related work experience will be considered
  • EXPERIENCE: Entry-level
47

Quality Assurance Technician Resume Examples & Samples

  • Trains inspection (audit) personnel on workmanship standards
  • Applies quality standards for receiving, in-process and final inspection in accordance with Federal Aviation Administration (FAA), Rockwell Collins and contractual requirements
  • Utilizes lean tools to complete root cause investigations for Quality issues and provides support to manufacturing for the execution of containment and corrective actions
  • Adherence to and continuous improvement of standard work processes and quality performance within assigned Production Cells
  • First Article Inspection in accordance with AS9102, Rockwell Collins Quality Management System and customer contracts
  • Internal product, process and test auditing in accordance with AS9100, Rockwell Collins Quality Management System, Workmanship Standards, Avionics Standard Shop Practices and Melbourne processes and specifications
  • Rockwell Collins Organization Designation Authorization (ODA) unit member in accordance with FAA regulation 14 CFR 21
  • Other duties and responsibilities as identified by the cognizant Quality Assurance Manager
  • Associate’s degree or, in absence of a degree, three years of work experience required
  • U.S. citizen or permanent resident (green card) required
  • Must have a minimum of 1 year combined micro-electronics and/or electro-mechanical inspection experience
  • Must have computer skills and be proficient in Microsoft Word, Excel and SAP
  • Must have current FAA ODA Unit Member certificate or be eligible to complete training and certification
  • Must be able to read engineering/configuration drawings
  • Must have flexible work schedule; typically a 9/80 work week and may be required to work on off-hours and weekends
48

Quality Assurance Technician Resume Examples & Samples

  • Inspect incoming and outgoing materials, generate inspection reports
  • Inspect and analyzes returned materials, work closely with the Returned Material Authorization (RMA) team to determine the status and disposition of materials
  • Develop, improve, and maintain work procedures
  • Support the ISO-9001 based Quality Management System
  • Perform supplier audits and publish audit results
  • Prepare quality data for supplier and customer audits as well as for internal purposes
  • Publish quality reports using Word, Excel, PowerPoint; incorporating photos and other graphical files
  • 2+ years in Quality Assurance field
  • 1+ years in inspection
  • 1+ years in manufacturing
  • 1+ years in semiconductor industry
  • CMM operation experience with knowledge of Calypso software operations
  • Hands on knowledge in using common metrology tools such as calipers, micrometers, electrical meters, etc
  • First year college level math skills in Algebra and Trigonometry
  • Proficiency in general computer skills and applications such as Words, Excel, PowerPoint, etc
  • Basic mechanical skills
  • Ability to produce clear and meaningful reports and presentations in English
  • Able to travel out of town by planes
  • Able to work in long periods of time wearing cleanroom garments: hood, face mask, cleanroom suit, safety glasses etc
  • Able to lift safely 40 lbs
  • Able to climb ladders safely
  • A team player, able to work with people from different cultures and backgrounds
  • Proficiency in CAD software such as Creo
  • Understand geometric dimensioning and tolerancing
49

Quality Assurance Technician Resume Examples & Samples

  • Evaluates packaging quality control procedures, identifies gaps and develops corrective action in coordination with winemaking, production and QSEFS teams. Maintains and updates Standards and Specifications for packaging quality controls
  • Assist with QC wet chemistry, from grape to finished wine, as requested by winemaking team. Performs all routine wet chemical/physical analyses on grapes, juices, fermenting musts, yeast cultures and wines during harvest, bottling, and storage. Performs bench trials for blending, fining and additions. Performs bottling routine analyses to assure wine meets legal and quality requirements. Check integrity of package throughout operation of bottling line. Monitors bottling tanks, yeast cultures and bottled samples to assure wine quality
  • Trains new hires on quality control for product analyses, bottling/packaging quality assurance, and record keeping procedures. Train line employees on proper inspection / QC on production lines. May oversee and provide work direction to others, especially laboratory seasonal help
  • Advise bottling personnel in quality control issues. Troubleshoot packaging issues on bottling lines
  • Order laboratory supplies and equipment as required for packaging quality control
  • Dispatch QC approved packaging to Mumm Napa and co-packing facility production lines
  • Help prepare laboratory for certification programs such as HACCP and ISO
  • Assists with laboratory Environmental Health and Safety compliance and Hazardous
  • Communication (Material Safety Data Sheets) program and internal audits. Works with Safety Officers to ensure all mandatory safety programs are current and ongoing in the laboratory. Ensure that packaging MSDS are up to date at all times
  • Maintain chemical inventory and update Material Safety Data Sheets as required
  • Minimum 3 years’ experience in all phases of laboratory operations
  • Previous experience with packaging QC required
  • Demonstrated ability to work independently, with little supervision
  • Strong Chemistry skills required
  • Must be highly organized and able to multi-task with diverse projects
  • Demonstrated ability to perform with speed, accuracy and precision
50

Senior Quality Assurance Technician Resume Examples & Samples

  • Ensure customer quality expectations are understood and reflected in all products and business processes
  • Provide support for manufacturing regarding change management, discrepant material and product specifications and qualifications
  • Support Supply Chain Management function relative to the collection and analysis of supplier quality data, and assisting suppliers with product and process quality requirements
  • Compliance with all required Safety and Environmental Policies and Procedures. Safety is a condition of continued employment
  • Works closely with other QA staff members and employees from throughout the organization, fostering a team-oriented work environment, to address quality issues (from both internal and external customers.)
  • Design and layout product labels on the PC
  • Maintain and update parts drawings by use of CAD
  • Product set-up in ERP/MRP system
  • High School graduate or equivalent required, Associate Degree or higher preferred
  • Minimum 3 to 5 years experience in a Quality Assurance role
51

Quality Assurance Technician Resume Examples & Samples

  • Knowledge of quality management systems, configuration management principles and product conformity
  • Responsible for performing quality control inspections, witnessing tests and completing appropriate documentation in the shop or field as directed by supervisor
  • The Quality Inspector will primarily have responsibility for inspections and tests pertaining to electrical controls and instrumentation cable
  • Must have the ability to understanding and interpret required engineering drawings, specifications, work instructions and technical manuals
  • Must have the ability to use measuring equipment including scales, calipers, micrometers, depth gauges and various types of precision measuring equipment for product acceptance
  • Must have the ability to inspect in-process and completed products such as valves and components, electronic units and subsystems, softgoods, precision electromechanical assemblies or mechanical units, electrical systems and subassemblies for product acceptance
  • Knowledge of mechanical systems such as high pressures, pneumatics, cryogenic, hydraulic systems, liquid hydrogen, liquid oxygen and high pressure gases
  • Must work well independently, as well as in a team environment. Must have good communication skills and demonstrate good attention to detail during performance of roles and responsibilities. Must be willing to work all shifts and weekends
52

Quality Assurance Technician Resume Examples & Samples

  • 3-5 years of experience in the field of quality assurance or extrusion manufacturing is required
  • A working knowledge of computers is required and must be proficient in Microsoft Word and Excel
  • Must be able to work with little supervision
  • Must be able to effectively communicate both verbally and in writing, as well as be able to speak in front of large groups
  • Prior training experience a plus
53

Quality Assurance Technician st Shift Resume Examples & Samples

  • Monitor and inspect product and processing steps to ensure production to designed quality standards
  • Performs reviews of product for compliance with stated requirements
  • Check for defects in product and perform measurements to support that standards are met
  • Calculate pieces per pounds per pallet or combo
  • Return inspected product to the production line upon completion of required product verification checks
  • In between product verification checks technician must walk through production area(s) to monitor for GMP or other potential product handling violations, and communicate any issues or findings to their supervisor
  • Identify returned product or product on hold for analysis
  • Record all findings on the appropriate document to support product’s consistency with company, customer and government specifications
  • Provide evidence of findings on the product as instructed
  • Notify the production management when specific action levels are met
  • Use required PPE and follow all safety guidelines of the Company
  • Monitor and inspect product and processing steps
  • Perform required reviews of product for compliance
  • Record keeping. Ensure accurate and timely documentation of findings prior to the end of shift
  • Assist in maintaining an organized workstation
  • Assist in performing other product verifications as necessary
  • Able to use required tools for verifications (i.e. thermometer, scales, calculator, etc.)
  • Able to read, write and verbally communicate effectively (English)
54

Quality Assurance Technician Resume Examples & Samples

  • Accurately and promptly fill out required forms and paper work documenting inspection and audit functions
  • Assist in the management of the calibration and environmental monitoring programs
  • Audit Product History Records, Sterilization Records, and other documentation as required, in order to prepare product for release
  • Carry out specialized testing and investigation as assigned to measure and quantify specific quality issues
  • Evaluate and track product returned from the customer per Complaint Handling and Bowl Investigation Procedure
  • May be required to perform other tasks as requested by group leader or supervisor
  • Perform inspection on incoming raw material per approved procedures. Assist in monitoring supplier quality trends and corrective action
  • Perform routine audits of the molding and assembly operation per QCP’s. Work with manufacturing to establish corrective action and assure effectiveness
  • Understand all quality requirements (ex. ISO, FDA regulation, etc.) with medical device manufacturing
  • Work with various chemicals such as alcohol in a safe manner
55

Quality Assurance Technician Resume Examples & Samples

  • A technical degree/diploma in Quality Assurance or related discipline, or equivalent work experience
  • Ability to perform machine shop level math. Machine and/or Design knowledge
  • Knowledge of manual and automated inspection techniques, tolerance and blueprint reading, GD&T, surface finish and optical comparator, metrology and calibration management
  • Verbal and written communication skills necessary to effectively present data and information
  • A team oriented attitude
  • Ability to perform duties with only minimal supervision
  • Ability to learn job duties and product familiarity in a fast paced environment
  • Willingness to work extended hours and weekends if needed
  • Proficiency in MS Project, Word, Excel, and PowerPoint
  • The ability to effectively influence and collaborate in a cross functional team environment
  • The ability to work effectively under pressure and meet key deliverables in a timely fashion, in an environment that may include compressed timeframes and multiple, shifting priorities
  • The ability to be creative and develop unique techniques for challenging tasks
  • Experience or knowledge of the marine/boating industry is always helpful
56

Quality Assurance Technician Resume Examples & Samples

  • This position involves a combination of visually monitoring various aspects of plant operations, or physically obtaining samples and testing in the Q.A. Lab
  • Trained to conduct sanitation inspections on a pre-operational basis
  • Perform all applicable analytical tests on raw ingredients, in-process and finished products
  • Prepare testing solutions, equipment calibrations, general maintenance and upkeep of laboratory
  • Assist in identifying and managing HOLD products and the rework process
  • Monitoring and validation of HACCP and all quality check points
  • Assist management in implementation of procedures, protocols and policies, and monitoring for compliance of such
  • Perform data entry on QA database and assist management in data trending
  • Identify quality, procedure and policy deviations; effectively report such deviations and provide accurate information in a timely manner and as needed
  • Participate in our continuous improvement plans
  • Provides technical assistance to production personnel as needed
  • Maintain a safe work environment for all employees
  • Other duties deemed necessary by Quality Assurance Manager
57

Quality Assurance Technician Resume Examples & Samples

  • A completed Associate's Degree in a relevant field preferred, high school diploma required
  • Effective communication and Interpersonal skills
  • Excellent math, verbal and written skills required
  • Previous QC and test equipment experience preferred
  • Excellent attendance and work record required
  • Must be able to adjust work schedule if needed for deadlines
  • Must have a strong working knowledge of PC applications including Microsoft SharePoint
  • Experience with an ERP system such as SAP preferred
  • Must be detail oriented in regards to product quality, product specifications and operational procedures as they relate to addressing and resolving "problem report" issues
  • Must be able to work independently without a lot of daily supervision
58

Quality Assurance Technician Resume Examples & Samples

  • Perform various levels of inspection: incoming receiving, in-process manufacturing and finished goods process audit
  • Determine from blueprint and specifications the dimensions, finishes, processes and methods of inspection, precision measuring instruments (i.e.: CMM, calipers, micrometers), gauges, tools and set-up required for checking surfaces and variations
  • Participate in the implementation of product quality improvement initiatives to reduce process variation and prevent defects
  • Use quality tools (and others) to troubleshoot, identify and analyze problems to the true root-cause level, and work with the appropriate teams to implement solutions and ensure the identified root- because problems are resolved
  • Support activities to build quality into the product through process and system improvements, proactive planning, and responsive reactions to emergencies in a structured approach to resolve root-causes
  • Lead Kaizen events on manufacturing floor with crosses functional teams
  • Identifies raw material condition by collecting material samples; conducting inspections and requesting testing as required
  • Documents finished product status by recording and summarizing raw materials, in-process, and finished product inspection and physical test-data; updating quality assurance reports
59

Quality Assurance Technician Resume Examples & Samples

  • Design, create, and execute high quality reusable manual test cases and scripts
  • Leverage test case management and defect tracking solutions
  • Diagnose issues and share with engineers what isn’t working correctly and why
  • Deliver high quality products on time while working in Agile Teams and following Agile methodologies
  • Design and execute testing plans for internet applications
  • Effectively leverage test case management and defect tracking solutions
  • Work on Agile Teams and following Agile methodologies, such as SCRUM
  • Two year college degree
  • Or, two years of computer software testing testing experience
  • QA testing for internet applications
  • Experience following Agile methodologies
  • Additional industry certifications in related technologies preferred
  • Familiarity with wide-range of Microsoft products including operating systems, servers, Active Directory, and productivity applications. Knowledge of other technologies used within the IT industry, especially in regards to internet applications. Able to troubleshoot and resolve minor PC hardware issues
60

Software Quality Assurance Technician Resume Examples & Samples

  • Bachelor’s degree in Computer Science, Information Technology, or related field
  • One or more years’ experience in software testing and/or test automation
  • Experience working in and administering a Linux/Unix environment
  • Active DOD Security Clearance
  • Experience using automated test tools
  • Software development background and understanding of Object Oriented programming, design, and design patterns
61

Quality Assurance Technician Resume Examples & Samples

  • Drive Continuous Improvement at the company level through active involvement in scrap reduction activities
  • Daily review of product from all lines and inventory since previous day. Communication and follow-up is to be established between plant manager-production manager-quality managers
  • Ensure Wired Plant compliance through training, follow-up and documentation to plant management team if issues persist
  • Monitor proper handling of product by all employees (i.e. product damage, proper storage)
  • Facilitate monthly quality training with Line Operators, DST’s, Loaders and Material Handlers
  • Monitor inspections of resale products to ensure compliance with requirements
  • Generate certification and compliance letters as required
  • Respond to field complaints/visit customer locations
  • Understand and practice ADS CORE VALUES
  • Mathematics skills
  • Intermediate computer skills (MS Office Suite)
  • Mechanical and process aptitudeProcess improvementLeading and managing change
  • Lean Six Sigma
62

Quality Assurance Technician Resume Examples & Samples

  • Under general supervision, this position assists in maintaining quality expectations and regulations for a biological vaccine manufacturing site in accordance with GMP guidelines and site procedures
  • Reviews and releases of incoming raw materials for use in production of biological vaccines
  • Inspects and releases regulated packaging materials
  • Reviews production records for accuracy and compliance
  • Processes vaccine seed request from manufacturing and maintains seed inventory
  • Completes other tasks as assigned
  • Ability to successfully coordinate multiple projects/tasks and meet expected deadlines
  • Ability to effectively follow Standard Operating Procedures and other written guidelines
  • Strong computer, communication, and writing skills
  • One to three years of experience in a quality or auditing related setting
  • Knowledgeable regarding USDA requirements for vaccine manufacturing
  • Ability to provide input on process related issues with a solid scientific foundation
63

Quality Assurance Technician Resume Examples & Samples

  • Familiarity with Quality Assurance, its function and administration
  • Experience of working in a manufacturing environment
  • Knowledge of the following beneficial: ISO 9001, ISO 14001, Agile & Oracle
  • Appropriate engineering related qualification at HNC level or equivalent
  • Ability to work within company policies and procedures to complete assigned tasks to deadline
  • Proven Self-Starter
  • Initiative to recognise and manage occasional deviations from accepted practice
64

Quality Assurance Technician Resume Examples & Samples

  • Quality inspection, gauge calibration, and internal audits
  • Associate of Applied Science (AAS) degree REQUIRED
  • 2 years of incoming QA inspection experience required
  • Process Improvement, Analyzing Information, Strategic Planning, Verbal Communication, Informing Others, Quality Engineering, Emphasizing Excellence, Pharmacology, Attention to Detail, Thoroughness, Dealing with Complexity
  • Must be able to work 1st shift: Monday-Friday 7:30AM - 4:30PM
  • Professional, positive, and confident demeanor
  • Strong organizational and communication skills (verbal and written)
  • Ability to handle pressure, multitask, and maintain a positive enthusiastic attitude
  • Strong computer skills i.e. Word, Excel, PowerPoint, and Outlook
65

Quality Assurance Technician Resume Examples & Samples

  • Oversee QC for the set top box (STB) operation,
  • Act as lead auditor with strong emphasis on ISO/TL 9000 registration requirements
  • Update current inspection and system procedures
  • Identify process and product deficiencies, research improvements and institute corrective actions
  • Maintain calibration and performance verification schedules and records
  • Verify equipment is calibrated, logged and maintained
  • Prepare quality control reports including data analysis
  • Set-up and participate in QAT's and meetings
  • Manage the Quality information Systems (QIS)
66

Quality Assurance Technician Resume Examples & Samples

  • Monitor product processing, consistency, and packaging integrity by conducting analytical testing, sensory, product/ingredient sampling, as well as documentation verifications for quality assurance and measurement analysis
  • Takes action on any quality noncompliance and records all results in the Quality Computer System
  • Document investigations, findings, root cause analysis, and situations that occur within the shift
  • Hold product not within specification by generating hold tags and to distribute to the proper personal. Assist in the disposition of Hold Product when needed. Maintain the QA Hold system on a daily basis
  • Maintains daily retention sample procedure for finished goods item
  • Maintain laboratory inventory of tools, supplies, chemicals, and assure all measurement analysis equipment is functional as well as calibrated on a routine basis
  • Support operation on quality-related activities, such as pre-operational follow-up verifications, product start-up, and end of run verifications, and technical assistance as needed
  • Assist with routine and situational GMP/Food safety inspections, exercises, systems, and/or investigations for any quality, food safety & security concerns
  • Perform testing of raw material sampling to finish product and Sensory evaluation (cupping)
  • Conduct QA line audits & GMP inspections
  • 2 year VOC/Tech Degree required, 4 Year Bachelor Degree preferred in Food or Science related program
  • 2 years Quality Assurance experience in a manufacturing environment
  • Certified HACCP and SQF training and experience highly preferred
  • Experience drafting written procedures and test methodologies in a laboratory environment
  • Systems and program experience (i.e. Adobe, SharePoint, Excel, Word, Power Point, Access, MES)
67

Quality Assurance Technician Resume Examples & Samples

  • Assist in regulatory, customer and 3rd party audits
  • Champion company's SQF implementation plan
  • Management of sanitation related tasks including management and supervision of cleaning personnel, working with chemical suppliers, controlling chemical usage, and in general ensuring that the facility and equipment are safe from potential food safety hazards
  • Responsible for the thorough maintenance of all compliance related documentation
  • Integral member of HACCP team
  • Ensure compliance with applicable laws, regulations and food safety standards issued by FDA and other federal, state, and local agencies involved with food safety activities
  • Maintain up-to-date records for compliance with federal, state, HACCP regulations
  • Champion ongoing employee training activities designed to keep employees knowledgeable and informed of SOPs, methods, and Good Manufacturing Procedures according to program needs
  • Ensures that standards for personal hygiene are met and implements corrective actions where needed
  • Works with plant supervisors to assure compliance with SOPs and GMPs
  • Maintain environmental and product testing program including ongoing laboratory testing of environment, raw materials and finished goods
  • Perform projects as required by Manager
  • Ability to handle multiple & competing priorities in a fast-paced environment
  • Maintain business processes to ensure safety, wholesomeness, and freshness of products
  • Work independently, be reliable, responsible, and dependable
  • Demonstrated ability to interact with others
68

Quality Assurance Technician Resume Examples & Samples

  • High School diploma/GED or higher from an accredited institution
  • Minimum of two (2) years combined experience working in a manufacturing, pilot plant, and/or laboratory environment
  • Experience with impact testing for molded parts
  • Coordinate Measuring Machine (CMM) experience
  • Experience using a forklift and/or manlift
  • Extrusion experience in a manufacturing environment
  • Experience with web handling, nonwovens processes and/or equipment, and/or converting processes
  • Strong mechanical aptitude and good problem solving skills
  • Ability to complete work with little supervision and work well in a team environment
  • Personal flexibility to handle change within the workplace
  • Microsoft Office proficient, Minitab a plus
69

Quality Assurance Technician Resume Examples & Samples

  • Ensure all required information is documented in accordance with SOP’s
  • Follow Good Manufacturing Practices
  • High School Diploma or GED preferred; or one to two years related experience and/or training; or, equivalent combination of education and experience
  • Must be able to lift up to 25 pounds occasionally including overhead
  • Must be able to work in a wet environment. Exposure to chemicals. Exposure to nut allergens
  • Must be able to work in a -20 Degree environment
70

Quality Assurance Technician Resume Examples & Samples

  • Conducts audits, at the supervisor’s discretion, of reworked product to verify it meets customer requirements
  • Reviews quality related paperwork for accuracy and works with the appropriate Machine Operator or Manager to correct discrepancies
  • Perform physical tests to determine if product meets customer requirements
  • Communicate with prior shift (inspectors, packers, and operators) to find out about any potential or existing problems and changes
  • Check and review schedule and work orders
  • Completes certificates of compliance and certificates of analysis per customers’ requirements
  • Check calibration of equipment
  • Conduct Daily quality audits
  • Troubleshoot potential quality issues
  • Previous quality assurance experience preferred
  • Self motivated with ability to complete multiple tasks simultaneously
  • Ability to lift 40 lbs. occasionally
  • Ability to communicate with peers in a professional manner
71

Quality Assurance Technician Resume Examples & Samples

  • Perform required quantitative and qualitative product & ingredient analyses and maintain accurate reporting. Review, monitor and take appropriate action regarding production processes to ensure conformance with critical factors, specification and plant and regulatory policies
  • Review and report on summary production data as it relates to food safety, quality and efficiency. Utilize SAP-QM and SPC as analytical tool and WCM (World Class Manufacturing as Continuous Improvement process) as key drivers of our loss reduction process
  • Assist Quality Supervision in the development and implementation of food safety and quality programs and the evaluation of customer complaints. Participate in making recommendations to Plant Leadership regarding quality and production system improvements
  • Participate on FI teams in solving product/process losses with R&D, Engineering, Production supervisors and operators utilizing SPC, WCM or other appropriate problem solving methods
  • Provide training to plant operations personnel on Quality programs to promote the safe and cost-effective production of quality product
  • Maintain timely, accurate and complete reporting of routine and pertinent information to Quality management and other interested parties
  • Work with product/process development to establish formulation methods that ensure the production of consistent quality products. Review new and revised product formulae to ensure that they conform to quality standards and are capable of meeting specification
  • Responsible for verifying the accuracy and appropriateness of in-process formulae, specifications and testing procedures and initiating changes as required
  • Lead the sensory evaluation of in-process materials and finished products and make the necessary formula modifications as required to maintain or improve product quality as a consequence of ingredient or process variations
  • Perform and document periodic sanitation and safety audits and make recommendations to management for improvement
  • Monitor reprocessing and repackaging operations
  • Active participation on plant safety committee. Promotes Safety, Health and Environmental policies and programs
  • Incumbent is responsible for conforming to the Company's EEO Policy and Affirmative Action commitments directly related to this position. The company is committed to a policy of equal employment opportunity under which each manager's EEO and Affirmative Action responsibility ranks with other key areas of responsibilities
  • 1-2 years’ experience in QA/QC for a food manufacturing operation preferred
  • Familiar with quality/food safety programs including HACCP, SSOP, Integrated Pest Management, FDA cGMP, TPM, WCM, Statistics including SPC and SAP/Interspec preferred. Computer skill with MS Office –excel, word required
  • The ideal candidate will be able to perform basic microbiological sampling & testing and basic wet chemistry titration
72

Quality Assurance Technician Resume Examples & Samples

  • General Requirements
  • High School degree required; Associates degree preferred
  • Lean Six Sigma training recommended
  • Prefer experience and knowledge of manufacturing systems, the quality function and technical products. Further experience with calibration, metrology and quality system management will be beneficial
  • Ability to use Microsoft Office Packages (Word, Excel, Outlook, PowerPoint) Minitab experience beneficial
  • Good interpersonal skills – works with others well, respects others, is respected, good communicator
  • Organized –organizes time and information efficiently
  • Responsive – follows up and completes action items
  • Takes the initiative – self started, motivates others, bias for action
  • Prioritizes work – uses limited resources to accomplish business needs
  • Open and honest
73

Quality Assurance Technician Resume Examples & Samples

  • Visually inspects boxes for damage or improper packaging
  • Matches packing slips to P.O. using descriptions, vendor numbers, MSC item numbers and quantity
  • Verifies products using item numbers, descriptions, and quantity and measuring tools
  • Inspects products for damage and ensures product specifications and inspects pick locations
  • Identifies items using visual inspections, reference manuals or measuring instruments
  • Counts items
  • Researches and communicates cross-functionally with MSC departments to resolve discrepancies
  • Assists in returns area identifying incorrect items and taking action to correct inventory, catalogs and assist product in ordering and advertisement of items
  • Handles Return to Vendor issues in Credits and Returns area, for defective items
  • Assists sales with customer’s technical questions by phone conference on equipment and/or tool applications
  • Assists bin check department with technical questions of customers by testing or gauging item on replacement orders or contact customer for assisting with application
  • Fosters the MSC Culture in the department and throughout the company to ensure unity of purpose and fulfillment of MSC’s mission
  • Operates materials handling equipment as necessary. (ie., turret truck and/or order picker)
  • Calculates productivity or error rate using warehouse computer systems, PC systems, or manual calculation
  • Assists department supervisor with productivity enhancements, performance monitoring, and SOP updates
  • In order to meet customer service requirements, associates can be temporarily re-assigned to other warehouse functions
  • Participates in special projects and performs additional duties as required
  • High school diploma or the equivalent required
  • Three years of experience in light duty manufacturing required
  • Ability to read and interpret technical drawings and specifications
  • Customer service and sales experience
  • May require MSC license to drive warehouse vehicles
  • Basic computer literacy required in Excel & Word as well as AS400 screens
  • Knowledge of handling procedures for DOT regulated materials required
  • Knowledge of industrial product offerings required
  • Knowledge of precision measuring required
  • Knowledge of packing and picking procedures required
74

Quality Assurance Technician Resume Examples & Samples

  • Performs AQL (Acceptable Quality Limits) Inspections of Raw Materials, In-Process Audits, and Final Inspections to ensure product quality standards are met throughout the manufacturing process
  • Organizes offline inspection activities (Documentation, Inspection Criteria, etc.)
  • Documents any internal/external product/process related non-conformity in ER (Errors Report) system
  • Provides necessary support to resolve customer ER’s and other quality related issues
  • Provides detailed information of AQL failure to appropriate management
  • Must have high school diploma or G.E.D
  • Must have the ability to read and write instructions and correspondence
  • Must pass color vision test
  • Must have intermediate computer skills (email, routine database activity, word processing, spreadsheets, graphics, etc.)
  • Must be able to maintain good attendance
  • Must be willing to work overtime as needed; significant overtime may be required during busy periods
75

Quality Assurance Technician Resume Examples & Samples

  • High energy level with a demonstrated passion toward driving continuous improvement in quality systems
  • Self-directed, requiring minimal supervision or guidance
  • Ability to manage responsibilities and workflow effectively and efficiently to meet timeframes for work assignments consistently
  • Ability to maintain confidentiality of information -- a high level of integrity
  • Occasional lifting or moving of light to moderate weight items up to 30 pounds
  • Ability to operate typical laboratory equipment
  • Solid decision making skills with ability to recognize boundaries and seek assistance when needed
  • Solid computer skills, including working knowledge of Microsoft programs (Word, Excel, PowerPoint, and Access)
  • Strong math skills as they apply to data development, collection, and analysis. Working knowledge of statistics
  • Solid organization skills, project management skills and ability to generate routine and non-routine reports
  • Excellent interpersonal skills and the ability to effectively work with different groups, departments and levels of management, especially when team actions are necessary
  • Training and/or experience in microbiology preferred
  • Experience in a food manufacturing facility working with quality assurance systems preferred
  • Minimum of High School Diploma or G.E.D. required. A bachelor's degree is preferred
76

Quality Assurance Technician Resume Examples & Samples

  • Perform Quality, Food Safety, Sanitation and Safety audits
  • Communicate with all levels of management audit results
  • Perform pre-operational inspections and Operational duties
  • Assist the plant production team in achieving metric goals
  • Previous experience as a QA technician
  • Ability to work in areas of extreme heat, and cold conditions
  • Good counting/ math skills
  • Experience working with a diverse group of people. Bilingual Spanish and English a plus
  • Ability to maintain high expectations for self and others, demonstrating a dedication to achievement of results
  • Detail oriented, organized, reliable and resourceful
  • Ability to work effectively both independently and within a team environment
  • Ability to pass pre-employment and random drug tests
  • Ability to lift up to 50 pounds on a daily basis
77

Senior Quality Assurance Technician Resume Examples & Samples

  • Perform and support Reliability, Conformity, and Qualification inspections and configuration capture for various programs
  • Support Customer and Government Source Inspections
  • Company travel for product or program support for inspection and/or SAP or SW upgrades as needed
  • Travel between Cedar Rapids facilities to support various inspection and program quality support
  • Prepare and Submit Quality records to storage for record retention
  • Attend prep reviews
  • FIT and SAP mentoring / training
  • Review 989 drawing packages and compare red marked drawings to released drawings
  • Support Engineering Project Assistants (EPA) group with the following activities
  • Mentoring on/Creating Engineering Y-Lab Orders
  • Configuration Capture
  • Build support
  • Associate's degree or, in absence of a degree, three years of work experience
  • This position requires you to work in a restricted facility requiring U.S. Citizenship or Permanent Residence (Green Card)
  • Experience performing inspections of circuit card and top level assemblies
  • Knowledge of Rockwell Collins Workmanship Standards
  • SAP and FIT preferred
78

Quality Assurance Technician Resume Examples & Samples

  • Assure that quality assurance standards and documents are communicated and enforced by conducting daily inspections
  • Performs environmental swabbing of production equipment and environment with analysis of results
  • Prepares written documents describing analysis techniques and test results; writes SOP's and other quality documents and reports
  • Communicate with all levels of the organization in review of test results, including written and verbal forms
  • Enters quality-related work orders into SAP
  • Gather special samples for additional incubation and defects audits as directed
  • Provide support for sample gathering and data recording for plant trials, 1100's and research efforts
  • Perform audits to verify compliance with established SOP documentation, GMP's, HACCP and Safe Quality Food {SQF) efforts
  • Assists with the coordination, performance, and documentation remediation of product on hold
  • Reviews regulatory documentation for product release (i.e. record review)
  • Maintains inventory of materials related to microbiological testing and coordinates shipments of samples
  • Coordinates and participates in quality inspection pallet tear-down
  • Assists with the implementation of quality initiatives
  • Determines SAP usage decisions on bulk deliveries
  • Maintains product specifications documentation for production
  • Monitor the HACCP Program and processes, reflecting a focus on continuous improvement With the customer complaint process and the product complaint process, including investigation, analysis, follow up, documentation, trending, and routine internal reporting to leadership
  • Communicate routinely with Quality Team Leader and plant leadership, identifying opportunities for improvement, training and quality assurance program goals or barriers
  • Exudes a high degree of inter-personal skills and has the ability to work well with everyone
  • Successfully complete the company provided training process
  • Experience in the food manufacturing industry management experience, preferably in the quality assurance function
  • Requires an in-depth working knowledge of food safety and food quality standards, regulations, and laws governing the food production industry such as SQF and environmental safety regulations along with a commitment to continuous improvement
  • Requires problem solving skills with an emphasis on detail orientation
  • Requires basic mathematical skills to be able to add, subtract, multiply, divide, and count
  • Proficiency in Microsoft Office programs; Word, Excel, PowerPoint, Outlook
  • Competency in English language (read, write, speak); excellent written, oral, and listening skills
  • Knowledge of regulations of major vendors and governmental agencies such as FDA,
  • OSHA, and EPA
  • Ability to define problems, collect data, establish facts, and draw valid conclusions
79

Quality Assurance Technician Resume Examples & Samples

  • Responsible for maintaining a safe, clean, sanitary, healthy, presentable, professional atmosphere, free of dust, clutter and trash in all working facilities and areas
  • Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools)
  • Responsible for precise execution of company time reporting procedures and accurate completion of timesheet
  • Responsible for providing Aerial Port Services on a 24/7/365 basis
  • A minimum of four (4) years of experience with quality review and surveillance standards
  • Shall have a working knowledge of all air terminal operations and training requirements/standards
80

Quality Assurance Technician Resume Examples & Samples

  • Work with internal functional areas to measure and maintain quality performance, communicate issues or concerns, assist in resolving issues and assist in achieving quality objectives
  • Perform product quality audits and inspections of parts, incoming parts, finished goods, manufacturing output and in-process manufacturing activities. After completing these activities, update databases and relevant paperwork, create reports, implement improvements and train operators as necessary to resolve issues
  • Execute typical quality systems activities as directed by supervision including but not limited to corrective actions, calibration, inspection and tests, non-conforming materials, audits, etc
  • Assist manufacturing team and engineering in resolving issues and eliminating defects in manufacturing, supply chain and with customers
  • Perform containment activities such as sorting, inspections, etc. to assist in the resolution of quality issues
  • Participate in continuous improvement events (kiazens) and lean manufacturing activities such as 5S’s
  • Experience running a Coordinate Measuring Machine (CMM) preferred
  • One to two years of manufacturing or quality experience
  • ISO 9000, ISO 13485, AS9100 or equivalent experience a plus
  • Must be able to lift 25-50 lbs
  • Root Cause Analysis tools and Corrective Action Systems
  • Ability to add, substract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals, convert from English to metric
  • Knowledge and experience with measurement hand tools such as calipers, micrometers, plug / thread gages, etc
  • Knowledge and ability to read engineering blueprints and create/execute measurement plans
  • Ability to write reports, business correspondence and procedures / work instructions
  • Strong communication, interpersonal and leadership abilities; good oral and written communications are essential to the position
  • MS Office (Excel, Word, Project, PowerPoint)
  • Ability to follow directions with attention to detail and think independently
81

Quality Assurance Technician Resume Examples & Samples

  • To assist the day to day operations of a team of Quality Assurance personnel to ensure compliance to Legality, Quality Systems and HACCP Principles
  • To aid in continuously developing the sites quality systems to meet the requirements of our customers, the company and regulatory bodies
  • Assist with customer and third party site visits/audits, providing the necessary detailed quality systems knowledge that will reflect conformance to requirements
  • To notify all suppliers of any Raw Material rejection made on site
  • Complete monthly glass and hard plastic audits and other internal audits to ensure that we maintain compliance with procedures. Take corrective action when necessary where issues are identified
  • To undertake troubleshooting activities on products / factory areas
  • Responsible for the development of QAS standards and shop floor training
  • Responsible for the management of all micro non-conformances and retesting requirements
  • To undertake audits of production highlighting non-conformances / breaches of food safety etc and implementing effective corrective action
  • To ensure that findings from external audits / visits are actioned in a timely manner
  • Provide advice and guidance when quality standards fall and make decisions on disposal or re-work as necessary. Conduct an investigation to obtain all details prior to approving concession
  • Ensure ‘incidents’ are thoroughly investigated and that agreed preventative measures are implemented
  • To be aware of any new / updated procedures and to ensure they are communicated to the relevant personnel
  • To ensure that the traceability of all products and components are accurately recorded and challenged
  • Ensure the HACCP system is being followed throughout the site and personnel are challenged on CCP’s
  • To liaise with suppliers / customers regarding issues with deliveries and non-conformances
  • To carry out any other mutually agreed duties outside the scope outlined above, as requested by the Plant Quality Manager
  • Understand business objectives and quality plans to be able to translate them into KPI’s for her/his team
  • Define and manage projects in her/his area focus on developing personal skills and support business moving forward
  • Understands the organization and processes used to listen to clients and consumers and collect data
  • Knowledge of formulation, process and equipment is critical to act rapidly on completing risk assessment for preventing re-occurring issues
  • Identifies and leads improvement of processes in order to improve efficiency of Quality & Food Safety Systems
  • Knows the risks in his/her area and the actions needed to manage them using a risk analysis tools based in HACCP principles
  • Knowledge and understanding the content in ISO 14000 and set KPI’s to manage and monitor compliance
  • Understands the nutritional basics
  • Validates the relevance of Problem solving, helps teams to decide priorities, when useful, orientates the Problem Solving Group towards advanced tools & Methods
  • English Speaking
  • Educated to degree level or industry experienced/ Professional qualifications
  • Experience of working in a Quality environment essential
  • Experience of manufacturing preferred
  • Strong Quality Management / Improvement background advantageous
  • Relevant academic qualifications/experience
  • Significant work experience in leading teams in pharma or FMCG environment
  • Capable of working on multiple priorities and setting targets and timeframes
  • Adaptable enough to work in an environment that changes / challenges daily
  • Ability to work in a pressurised, heavily targeted and measured environment
  • QA / GMP knowledge and implementation required. Knowledge of QA issues such as temp control, micro issues and risks from a food perspective
  • Experience of completing and reporting on Audit procedures
  • Understands how to add value to both the internal and external customer. Takes pride in work and strives to deliver high standards
  • Is competent at providing feedback, coaching and developing others in a positive way Creates a sense of team
  • IS flexible and adaptable. Takes responsibility for own learning. Communicates effectively at all levels and considers others opinions
82

Quality Assurance Technician Resume Examples & Samples

  • Selects products for tests at specified stages and tests products for variety of characteristics such as dimensions, performance, material defects and visual inspection to approved drawing and/or quality samples
  • Record test data into a computer and statistical quality control (SPC) measurements and maintain filing system of documents
  • Interprets engineering drawings, sketches, procedures and confers with management or quality assurance/regulatory and engineering staff to determine compliance to quality requirements
  • Enters data into ERP system relative to inspections, Device History Records and inventory control
  • One to Three years laboratory or quality assurance experience required
  • Experience with the use of mechanical measuring tools (calipers, micrometers, thread/plug gages, scales and hardness tester)
83

Quality Assurance Technician Resume Examples & Samples

  • Conduct allergen test for cleaning verification for equipment and tools
  • Analyze mix samples for solid and pH
  • Conduct micro testing of post pasteurized mixed after HTST and in PT tanks
  • Collect and evaluate retention samples
  • Conduct line checks and startups
  • Participate in FM and food safety or quality incidents investigations
  • Ensure GMP and GLP compliance
  • Bachelor’s degree in Food Science, Bio Chemistry, or Chemistry and knowledgeable of lab practices and procedures
  • A high degree of attention to detail and accuracy is required
  • Physical abilities: Finger dexterity is needed to access, enter and retrieve data using a computer keyboard, typewriter keyboard or calculator and to operate standard office equipment. The position occasionally bends, stoops, reaches, pushes and pulls drawers to retrieve and file information and lifts and carries reports and records that typically weigh less than 20 pounds. Wear personal protective equipment daily; continuously reach, push/pull; frequently twist; occasionally stoop/bend; intermittently crouch, climb, and balance; use hands for repetitive fine manipulation, pushing and pulling, and simple grasp; and talk and hear under noisy conditions. Visual acuity and taste to discern product variation
84

Quality Assurance Technician Resume Examples & Samples

  • Inspect in-house manufactured and/or delivered lots of raw materials, oil products, supplements, and personal-care products etc. to specifications
  • Pull samples from manufactured and/or delivered lots of raw materials, oil products, supplements, personal-care products; send for testing to QC Lab and QA Retentions, if applicable
  • Audit production manufacturing and processes
  • Input data into QA database for Quality Assurance
  • Input data into inventory database system for accountability
  • Maintain daily audit records and files
  • Audit and verify products and raw materials that do not meet specifications; know how to dispose of these products
  • Maintain Material Disposition Forms system
  • Understand Good Manufacturing Practices (required)
  • Maintain Quality Assurance Retention Sample system
  • Maintain a working knowledge of the latest codes and new developments in testing and examination methods of processes, materials, and products
  • Audit shipping line damages; verify products going to the Employee Store
  • Record and maintain Problem Product Reports
  • Investigate questionable products or ingredients
  • Audit FIFO/expiration dates
  • Two to three years’ related experience and/or training
  • Bachelor's degree from a four-year college or university is preferred
85

Packaging Quality Assurance Technician Resume Examples & Samples

  • Inspects and releases/or rejects received raw drug product to production
  • Takes samples for master sample comparison
  • Performs in process inspections and tests for quality control in the manufacture of product
  • Inspects finished drug product and verifies reconciliation of labels and inserts
  • Reviews batch record for completion and proper documentation
  • File and maintain GMP records
  • Ability to develop and maintain cooperative working relationships with others
  • Ability to use good judgment in order to carry out detailed instructions
86

Quality Assurance Technician Resume Examples & Samples

  • Perform incoming visual, dimensional, and documentation inspections
  • Perform visual inspection of work in process
  • Audit work in process paperwork
  • Accurately and clearly log results of inspections and descriptions of non-conformances into Oracle database
  • Process MRB transactions as directed by engineering
  • Shift schedule is Monday – Thursday 3:00pm to 1:30am, and overtime as needed
  • Experience using X-Ray, XRF, CMM, and CSAM image analysis
  • Experience with Oracle
  • ASQ CQT certification
  • Trained in ASME Y14.5 geometric dimensioning and tolerancing
  • Experience with Lean Manufacturing, Fortive Business System (FBS), or Danaher Business System (DBS)
87

Quality Assurance Technician Resume Examples & Samples

  • Familiarity with associated product regulatory standards and requirements such as cGMP/QSR/ISO 13485/etc
  • Computer experience with MS Access, Excel, Word and ERP systems
  • Mechanical testing experience
  • Ensures product meets specification requirements by performing documented testing procedures, analyzing test results for applicability, accuracy, and reasonableness of data and documenting required data/information
  • Clearly, completely, and accurately fills out forms, logs, and other applicable documentation
  • Contributes to the technical database of the department by ensuring all test data and related documentation are properly recorded and entered into the databases
  • Suggests and/or writes alternative testing procedures and protocols for supervisor’s approval
  • Monitors and maintains water systems used for testing of product to ensure they meet specified performance levels
  • Sets-up and operates test equipment and testing apparatus
  • Ensures calibrated equipment used is functional, appropriate for the task. And within calibration date
  • Appropriately processes non-conforming product and implements appropriate corrective action to prevent reoccurrence of nonconformity
  • Demonstrates ability to work cross-functionally with other departments
  • Trains others as needed.&#8217
  • Complies with, administers, maintains, and provides data to QA operation systems that may include but are not limited to
88

Quality Assurance Technician Resume Examples & Samples

  • Review finished goods to ensure customer specifications and quality
  • Requirements are met-visually and measurably
  • Approves the return/rework of non-conforming materials
  • Assists in problem solving and process improvement efforts
  • Implements corrective and preventative actions
  • Develops and documents the quality procedures
  • Trains co-workers on adherance to quality assurance procedures
  • Maintains written records for UL requirements
  • Acquire and maintain expert-level knowledge of all product functionality
  • Basic knowledge of electrical systems and ability to use standard test equipment such as digital multimeter, hypot tester and an oscilloscope
  • Personal attributes required include attention to detail, desire to learn, self-motivated, excellent problem solver and effective communication
  • May require lifting up to 70 pounds
  • Must pass background check and drug test
  • High School Diploma or GED Equivalent
  • 2+ years of understanding how theatrical lighting systems work
  • Understanding of basic mechanical and electrical concepts
  • Ability to use hand and power tools
  • 2+ years working in manufacturing or electrical field
  • Prior experience soldering, working with machinery
89

Software Quality Assurance Technician Resume Examples & Samples

  • Build and maintain an automated test infrastructure for a multi-platform product that will be used to validate all aspects of the product operation
  • Evaluate product functionality and create test strategies and test cases to assess product quality
  • Establish processes and tools set to maintain automation scripts and generate regular test reports
  • Bachelor’s Degree in Computer Science or related technical field and 1 years relevant work experience
  • Experience automating the validating of modern user interfaces and messaging infrastructures
  • Experience with evaluating and integrating open source and in house developed toolsets
  • Excellent communication skills and the ability to generate and communicate meaningful development metrics
90

Quality Assurance Technician Resume Examples & Samples

  • Operate, monitor, and control water process systems including Ultra-violet lights, zonation process, Reverse Osmosis filtration process, distillation process, sub-micron filtration process, pumps, valves, instrumentation, and mineral mixing/addition process. Read gauges, meters, chart recorders, and controller readouts and record data
  • Transfer product testing results from paper records to system database (SAP) General Activities Take action to improve one’s own knowledge and skills
  • Protect the confidentiality of company, supplier, and customer information
  • Comply with all Safety, Environmental, Security, and Good Manufacturing Practice policies
  • Comply with job procedures and supervisor instructions
  • Ensure the safety and security of self, coworkers, product, and property
  • Establish relationships and work effectively with Alco-workers at all levels and relevant contractors/suppliers/customers. Successfully complete all company and government required training
  • Adhere to laboratory and company ethical and legal conduct standards
  • Operate personal computer. Utilize software including word processing, spreadsheets, and inventory control systems
  • Basic Microbiology-Basic knowledge of food and water microbiology used to make judgments about the safety of ingredients, beverages, manufacturing techniques, packaging, and storage conditions
  • Basic Analytical Chemistry-Knowledge of qualitative and quantitative chemical analysis
  • This includes preparation, separation, detection, and other techniques and applying concepts of precision and accuracy. It also includes understanding new developments in the field and their effect on our products, ingredients and packaging materials
  • Applied Reading-The ability to read, understand, and apply standard written text in English that may or may not be written in traditional sentence form such as letters, memos, or manuals to complete job tasks. Basic Arithmetic Computation-The ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals
  • This also includes the ability to computations and percentages
  • Data Entry-The ability to enter data using a keyboarder keypad. Using Personal Computer. The ability to operate relevant personal computing hardware; ability to learn relevant personal computing hardware (e.g., personal computers, printers, and storage media) and standard software programs (e.g., word processing, graphics packages, spreadsheets\databases, SAP)
  • This includes maintaining current knowledge and keeping up with new releases irrelevant programs. File Management -Ability to develop organized filing system for maintaining and retrieving departmental records and documentation (i.e., correspondence, reference materials and notes).Document Management-Ability to create, approve, track and file documents and records in compliance with The Coca-Cola Quality System or other formal guidelines. Water Filtration /Treatment- Knowledge of the basic chemistry of water, foreign materials (e.g. Microbiological and other contaminants) found in water, and filtration or means of effectively removing contaminants or impurities. Includes knowledge of water standards (e.g., NSF, EPA) and their functionality
  • Ability to select and integrate water filtration equipment to achieve a cost effective solution to removal of water impurities affecting beverage taste or dispensing. This may include the ability to design and operate water facilities
  • Calibration-Ability to measure instrument variations and apply corrections for ensuring the accuracy and precision of an instrument or measurement tool. Laboratory Practices-Knowledge and application of Good Laboratory Practices (e.g. handling of chemicals and glassware, preparation of standards and reagents, proper measuring techniques, data management, housekeeping)
  • Laboratory Testing-Knowledge of packaging and equipment test procedures, measurement devices, reporting methods, and understand TCCC Design and Performance Criteria
91

Quality Assurance, Technician Resume Examples & Samples

  • Working knowledge of MS Office and software programs
  • Must be detailed oriented and have good planning and organization skills to handle multiple projects
  • Good communications skills required
  • Must be able to lift and move 50lbs
  • Must to able to work on feet for up to 6 hours daily
  • Working knowledge of SAP inventory control operating system
  • 2-3 years experience in production, Quality Assurance or warehousing
92

Quality Assurance Technician Resume Examples & Samples

  • Inspect and test raw materials, components, subassemblies, finished products(diameters, tensile, visual, etc) per written procedures
  • Maintain files of collected data to demonstrate QSR/ISQ/MDD compliance
  • Know and understand ZPO’s related to job assignments
  • Maintain work areas in clean and orderly manners
  • Participate in continuing education program as required
  • Ensure that ZPO’s related to job assignment are current and up to date
  • Support department and company goals. (as required)
  • Represent and promote quality standards in all contacts. (as required)
  • Must be able to detect occasional defect in a repetitive operation
  • Ability to analyze noncomformances
  • Ability to make product judgments against specifications and performance standards
  • Ability to judge raw material against specifications
  • Ability to use measuring instruments such as calipers, micrometers, tensile testing equipment
  • Must have good documentation skills to maintain neat and accurate records
  • High School Diploma and at least two years of post high school training in sciences or related fields or equivalent
  • Work experience in related field of manufacturing or quality control training desirable
93

Quality Assurance Technician Resume Examples & Samples

  • Light assembly and debug of hardware prototypes
  • Develops and executes test plans for assigned products in accordance to regulatory agency and/or Product Engineer guidelines
  • Ensures that product performs to specifications
  • Logs defects into issues database and tracks them through closure
  • Reports test results and maintains schedules for assigned features and functionality
  • Supports Contract Manufacture for production release, test procedure and defect resolution
  • Performs pre-test and completes submission packages for FCC/IC and UL product certification
  • Shows initiative in gaining in-depth experience in areas of technology relevant to testing of company products
  • Works well in a team environment without constant supervision
  • Excels at multi-tasking in an environment of continuous change
94

Quality Assurance Technician Resume Examples & Samples

  • Answers and resolves customer (e.g., external and internal) inquiries regarding systems and products with Merit Medical's focus to quality compliance. * Prepares written correspondence to address customer inquiries and/or concerns. * Assists Quality Engineering with the identification and control of Quality Compliance risks. * Identifies uncovered customer and/or process needs and assures needs and problems are properly communicated. * Provides information to staff regarding customer compliance issues. * Develops reports and compiles information for customers, departments and company management. * Conducts research, follow-up and tracking regarding customer recommendations and concerns. * Maintains up-to-date knowledge of company products. * Assists in the development or edit of new/revised procedures, forms, specifications. * Updates/develops new systems and procedures to streamline business practices. * Proactively and continuously improves internal systems and processes with a quality mindset
  • Generates Engineering Change Notifications (ECNs) to update Quality System documentation such as: procedures, forms, drawings, BOM/routers, workmanship standards, test methods, and/or inspection criteria. * Initiates internal/external nonconformances and responsible for assuring all phases are complete. * Evaluates internal/external nonconforming product in determining appropriate root cause, disposition and corrective action. * Ensures containment (identification, segregation and reconciliation) of nonconforming product has been performed to prevent unintended use. May include performing inventory management transactions. * Evaluates product placed in Quarantine/on hold to assure that it's dispositioned in a timely manner. Will determine if product/components can be transacted into/out of Quarantine based on supporting documentation provided by Engineering, and perform the transactions as applicable. * Identifies training needs, develops training plans and performs Quality Compliance training of technicians, Quality auditors or Production employees. * Assists Quality Engineering with the identification and control or Quality Compliance risks. * Evaluates the manufacturing work environment to ensure it is adequately environmentally controlled and monitored, with sufficient personnel and safety production controls. * Collects and submit information for material characterization testing such as MEM/IR. * Researches customer inquiries into Merit's compliance to applicable standards. Generates responses to various customer inquiries. * May assist with the supervision of technicians to include assigning work, ensuring proper completion of assignments and processes, and assisting with performance appraisals. * May participate in design and development activities. * Performs other related duties and tasks as required
  • Education equivalent to a High School Diploma with 7 years previous work related experience. College education preferred. * Medical device industry knowledge strongly preferred. * Working knowledge of quality compliance system requirements and medical device regulations. * Understanding of regulatory initiatives preferred (i.e. REACH, RoHS, BPA, California Prop 65, Conflict Minerals, Latex, DEHP, etc. * Excellent interpersonal, written and verbal communication skills and the ability to resolve customer requests efficiently and effectively. * Demonstrated computer skills preferably spreadsheets, word processing, database and other applicable software programs (e.g., Oracle). * Good organizational skills and the ability to work under strict time constraints to meet the demands of customers. * Attention to detail. * Ability to manage multiple projects and tasks simultaneously and to prioritize work, goals and tasks per corporate objectives. * Ability to work independently and with cross-functional teams
95

Quality Assurance Technician Resume Examples & Samples

  • Provides support to manufacturing operations in the review of engineering and manufacturing processes
  • Performs AS9100 audits in accordance with Rockwell Collins, customer, industry and regulatory standards, reports results, and supports follow-up actions including facilitating root cause analysis and corrective action through leading Operational Excellence Support (OES) events
  • Trains inspection personnel on workmanship standards
  • Performs new product introduction evaluation and first article inspection
  • Must be a dependable worker willing and able to commit to completing work on an agreed upon schedule
  • Rockwell Collins experience preferred
96

Senior Quality Assurance Technician Resume Examples & Samples

  • Must be able to create programs on CMM
  • Must have experience with drafting validation and verification protocols, executing and drafting reports
  • Perform root cause/ corrective actions
  • Height gauges
  • Comparator
  • CMM
97

Software Quality Assurance Technician Resume Examples & Samples

  • Receives requests for software testing due to upgrades and maintenance or new applications
  • Creates, executes and maintains quality assurance test plans based on technical and/or business requirements
  • Designs and develops quality assurance test scripts and plan to aid in the quality assurance process. Implements, tests, debugs and maintains test scripts
  • Coordinates work with other team members and communicates project status
  • Reports and reviews all progress with team members, managers and committees
  • Bachelor’s degree in business or information technology, computer science, software engineering or similar discipline preferred
  • A minimum of two years’ experience in a technical or software testing/quality assurance role
  • Experience in defect/test management tools preferred
  • A combination of experience and education may be substituted upon approval
  • Must have understanding and ability to utilize automated testing tools
  • Solid understanding of Windows and MacOS operating systems, as well as web applications
  • Knowledge of general QA procedures and methodologies and software development life cycle fundamentals
  • Ability to interpret SQL to troubleshoot and write SQL queries
  • Knowledge of University e-learning environments/software to be able to relate to GCU software application quickly
  • Provide a positive example to students by supporting the University’s Doctrinal Statement, Ethical Position Statement and Mission of Grand Canyon University
98

Quality Assurance Technician Resume Examples & Samples

  • Inspects and selects product at different stages of production to be tested
  • Analyzes incoming ingredients and ensures compliance to specifications
  • Performs Quality Team Audits
  • Help maintain lab, lab equipment and supplies in compliance with HACCP, FQP, GMP and Safety
  • Records and evaluates test data from samples
  • Acts as facilitator/coach in areas of safety and quality
  • Lifting up to 50 lbs. and push a sample cart up to 350 lbs
  • Bachelor’s degree (B.A.) from a 4-year college or university in Food Science or related area
  • 2 or more years related Quality Assurance experience; or equivalent combination of education that would provide the level of knowledge, skill and ability required is acceptable
  • Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo
  • Knowledge of uses of chemicals and their interactions, danger signs, production techniques, and disposal methods
  • Knowledge of electronic equipment, and computer hardware and software, including applications and programming
  • Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions
  • Conducting tests and inspections of products, services, or processes to evaluate quality or performance
  • Basic computer skills and knowledge of word processing and spread sheet programs very helpful
  • Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release
  • Ability to write routine reports and business correspondence
99

Quality Assurance Technician Resume Examples & Samples

  • Work safely, as well as report and assist in mitigating all safe concerns
  • Comprehend and support plant/corporate protocols and programs, as well as facility systems, including informational/operational/management systems such as Sample6, IQS/Sigma, and Ignition
  • Communicate effectively with other departments, management, and employees including notifying appropriate teams when problems and/or concerns arise
  • Work independently or within a team, with and without supervision
  • Ability to prioritize and multi-task to ensure that all job functions are completed accurately in a timely manner
  • Facilitate, attend and participate in team meetings and programs
  • Perform analytical, chemical, microbiological, and allergenic analysis both routine and episodic
  • Provide oversight for facility systems and actively participate and support the development, implementation, day to day operation, and maintenance of checks and balance programs such as coding checks, OQI (operator quality inspection) review, batch ownership including batch correction, and filler inspections
  • Ensure all paperwork is filled out in a clear, legible and accurate format and completed with all required information
  • Anticipate problems/conflicts, problem-solve, and react
  • React to data, perform out-of-specification mitigation
  • Properly manage product inventory utilizing programs such as SAP and SharePoint
  • Monitor, operate, maintain, calibrate, troubleshoot, and repair laboratory instruments and equipment without assistance
  • Participate in laboratory Specialist Program
  • Attend and practice all required training
  • Utilize root cause analysis thought process, maintain a proactive approach, and support sustainable solutions
  • Utilizing continuous improvement mindset, actively participate in identifying and correcting opportunities to improve processes including participation in the creation and documentation of Standard Operating Procedures and Work Instructions, the creation and maintenance of preventative maintenance standards, the writing of One Point Lessons, and participation in continuous improvement methodology events
  • Follow QMS, Good Manufacturing Practices and 5S methodology to maintain a clean, sanitary and safe work area, maintaining audit ready status at all times
  • Actively participate in Pillar activities (i.e. Quality, Focused Improvement, Safety, etc.) including but not limited to observations, inspections, and recommendations
  • Supports plant production needs and priorities to achieve plant goals
  • Assist, train, and coach peer employees
  • Comply with all regulations, policies and procedures
  • Ability to manage high pressure situations calmly
  • Ability to learn all functions of job within a reasonable amount of time
  • Ability to prioritize and multitask
  • Proven decision making ability
  • Ability to read, understand, and follow written instructions
  • Proficiency in basic laboratory equipment (i.e. pipets, pH meters, balances)
  • Ability to perform troubleshooting tasks
  • Proficiency in MS Office and basic PC skills
  • Ability to work various hours and shifts
  • Able to work overtime when required
  • Associate or Bachelor Degree in Chemistry, Biology, Bio-Technology, Food Science, or comparable program required. An equivalent combination of education and experience may be considered in lieu of degree
  • Achieve and maintain required certifications and training
  • 1-3 years of related work experience
100

Quality Assurance Technician Resume Examples & Samples

  • Uses limited discretionary judgment in making decisions regarding engineering alternatives
  • Generates and distributes NCMR's for specific area -- QAP's and MPS's
  • Audits and inspects the production process to confirm that Device History Records are completed according to Device Master Record/QSR/GMP regulations
  • Audits and inspects finished products to ensure that it conforms with Device History Records and applicable specification and procedures
  • Completes final inspection paperwork
  • Documents inspections and rejections on audit and inspection paperwork
  • Segregates product when discrepancies are noted
  • Initiates, identifies (labels) and ensures closure of NCMR's. Enters information into NCMR database
  • Operates testing equipment to verify that final product meets specifications
  • Performs dimensional audits and inspections
  • Performs product transfers as applicable
  • Performs specification training for production employees
  • Performs work order close-outs
  • Trains Quality Assurance Auditors
  • Assists Quality Engineers in performing testing and collection of related data and completing project assignments
  • Participates in the evaluation and selection of suppliers by monitoring and auditing their performance through collection and trending of data, as required
  • May perform back-up duties of Lead Quality Assurance Auditors
  • Performs other related quality audit and inspection tasks, as required
  • Education equivalent to a High School Diploma with five years previous work related experience, or an Associate's Degree with three years previous quality experience, or a Bachelor's Degree with one year experience
  • Knowledge of various tooling and testing equipment such as calipher and pin guage measurements, optical comparators
  • Audit presses and work orders
  • Excellent analytical skills and the ability to solve moderately complex technical problems
  • Ability to work well as a team member
101

Quality Assurance Technician Resume Examples & Samples

  • 3 years applicable document control experience in the carbon steel industry or commensurate experience within Olympic Steel is required
  • Knowledge of computerized document control
  • Strong organizing and planning skills; high level of creativity and problem solving needed
  • Knowledge of gage calibration systems and gage calibrations
  • Strong interpersonal and communication skills with the ability to work effectively with a wide range of constituencies
102

Quality Assurance Technician Resume Examples & Samples

  • Must be able to follow written directions and apply previously determined corrective action when deviations are identified
  • Must have the ability to detect slight variations in fresh meat color
  • Conduct Pre-Operational and other required Quality Assurance procedures pertaining to product, Standard Operating Procedures and Good Manufacturing Practices
  • Maintain, monitor and record information pertaining to products and production. This includes
  • Net weights Catch weights
  • Tares Product Temperatures
  • Code dating Product Specifications
  • Environmental samples
  • Monitor daily HACCP documentation assuring critical limits are maintained and corrective action applied and documented
  • Develop appropriate lines of communication with USDA inspectors acting as a liaison between Quality Assurance and USDA
  • Perform various duties / tasks as determined necessary by management
  • Responsible for Food Safety (temperature, HACCP. sanitation, sanitary conditions, foreign object control and allergens)
  • Responsible for Food Quality (specifications, grade, portion size, trim levels, texture, color and age)
  • Complete other duties as assigned by management. Responsible for working until relieved by manager. This may require working longer than schedule work hours
  • Interacts well with others. Good team player
  • Must be flexible to changing procedures/ priorities
  • Must be quick and agile
  • Strong logical reasoning skills
  • Strong understanding of safe work practices
  • Customer-service oriented
  • Ability to stand long period of times
  • Ability to lift up to 60 lb. boxes
  • Bending and twisting when loading conveyor and/or packaging equipment
  • Ability to turn at the waist and place boxes on conveyor
  • Ability to read specification sheets that come down the line for different orders
103

Quality Assurance Technician Resume Examples & Samples

  • In-Process Inspections
  • Verify in-process parts/sub-assemblies/Final Assembly Unit(s) match drawings/specification packet(s)
  • Review in-process inspection documents for correctness and completeness
  • Generate NCM (Non-Conforming Material) reports as needed
  • Identify product status as needed to prevent use/shipment of Non-Conforming product
  • Capture pictures where required, upload, name and maintain process
  • Distribute paperwork/documents where needed
  • Scanning and Data Entry
  • Scan inspection forms into designated files
  • Input inspection results into data base as needed
  • Skills and Abilities
  • General Computer skills. (Name and Save files, upload pictures, locate and retrieve documents)
  • Microsoft Office (Word/Excel/PowerPoint/Outlook)
  • Dependable
  • Good Communication Skills - Written and Verbal
  • Highly Motivated
  • Work Independently and Part of a Team
  • Deadline Driven
  • Able to Plan, Organize, and Prioritize Tasks
  • Confidentiality
  • Problem Assessment and Problem Solving
  • Information Gathering and Monitoring
  • Attention to Detail and Accuracy
104

Quality Assurance Technician Resume Examples & Samples

  • A minimum of two (2) years of Quality Assurance / Quality Control experience is preferred
  • Experience with detailed review of production batch records to ensure compliance with quality system and regulatory requirements
  • Ability to assist with product or process non-conformance investigation or prevention
105

Quality Assurance Technician Resume Examples & Samples

  • Ability to use and interpret precision measurement instruments (i.e., calipers, micrometers and gauges)
  • Ability to understand blue prints
  • Good interpersonal communications skills, both written and verbal
  • Excellent organizational skills and the ability to multi-task
  • Forklift license and Truck loading experience a must
  • Knowledge of products used a plus
106

Quality Assurance Technician Resume Examples & Samples

  • Develop standardized Quality programs for shop floor that are in full compliance with Bombardier Transportation Americas, IRIS and ISO Quality processes and standards then impliment the process
  • Audit shop for compliance to standards, documentation control, monitoring the overall performance in regards to quality
  • Control documentation, monitor the performance of processes in regards to quality, developing and recomending initiatives aimed at improving overall quality
  • Support the site in implementing Quality programs in full compliance with Bombardier Transportation Americas, IRIS and ISO Standards
  • Do ccontinuous improvement initiatives
  • You hold a Technical diploma
  • You have 2 years of experience in a similar role in the manufacturing industry
  • You are able to read engineering drawings and understand GD&T
  • Your SAP knowledge will be considered as an asset
107

Quality Assurance Technician / Specialist Resume Examples & Samples

  • Control and monitoring of measuring and test equipment calibrations to current standards
  • Maintain Regulatory file updates and assist in Regulatory audits
  • Perform incoming inspection for products as required
  • Evaluate non-conformances for system and product issues
  • Manage non-conformances using 8D problem solving methodology
  • Manage product returns with suppliers
108

Quality Assurance Technician Resume Examples & Samples

  • Monitor and assess packaging quality across all bottled products on the high-speed/high-volume bottling line
  • Ensure adherence to ISO 9000 and ISO 22000 standards
  • Action all non-conformances in relation to sub-standard production or material
  • Participate in internal audits as assigned
  • Liaise with suppliers to resolve issues and develop continuous improvement plans
  • Conduct laboratory testing as required
  • Calibration of equipment
  • Investigate and report on material related issues & non conformances
  • Develop reports for quality related issues
  • Attain plant & group KPI’s
  • Participate in project work
  • Third level qualification in general science, food science or other relevant production-related qualification
  • 3 years + experience in a similar role
  • An in-depth knowledge of product testing procedures
  • A good understanding of the principles of quality systems
  • Strict attention to detail
  • IT Literate
  • A decisive, motivated self-starter
  • Proactive approach to problem solving
109

Quality Assurance Technician Resume Examples & Samples

  • Be a champion of quality and operational excellence, help to define metrics that measure software quality
  • Dig into the requirements of a project to be able to write detailed test cases
  • Execute manual test cases in a timely manner to meet partner device commitment dates
  • 2+ Years experience in a QA role
  • A proven track record of designing and delivering test cases
  • Proven ability to write manual tests cases
  • You've worked on large scale distributed & highly available applications
  • Familiar testing video technology a bonus
  • Able to understand and write scripts for automated test cases
110

Quality Assurance Technician Resume Examples & Samples

  • Must ensure that quality products are being produced
  • Complete Pre-op equipment monitoring including swabs, ATP, etc
  • In-process product testing including microbiological analysis of products
  • Complete Data entry and ingredient inspection
  • Responsible for following all Food Safety Policies and Safety Procedures
  • Employees will follow all safety protocols and perform their job responsibilities in a safe manner. Safety is everyone’s responsibility
111

Quality Assurance Technician Resume Examples & Samples

  • Performs line clearance activity in manufacturing and packaging areas, verify the cleanliness of the rooms and equipment
  • Verify Manufacturing activity and review of Manufacturing Batch records between stages
  • In process checks & Monitoring of Manufacturing & Packaging activity, Review Packaging Batch record
  • Collect QC samples, retain sample, Stability sample, Maintain and perform visual inspection of all packaging samples
  • Ensure manufacturing area, log books, utility systems are completed and compliant per GMP and in house procedures
  • Review of labels, lot number for packaging and assurance that all material/components used in the packaging run are in accordance with the appropriate labels and lot number
  • Responsible for overall product quality on the production line maintenance of incoming list of components to be released
  • Assures appropriate disposition and destruction of unused Packaging components, including cartons, labels and inserts
  • Perform activities related to receipt, storage, inspection and issuance of labeling components
  • Inspect and sample raw materials & components for testing
  • Perform AQL and test raw materials and components per specification requirements
  • Other functions assigned by the Department Manager
  • High school diploma or AA or AS degree in Life Science preferred
  • At least 1-2 years of Medical Device and Pharmaceutical Industry experience
  • Knowledge of cGMP standards
  • Good interpersonal skills and ability to work as a team player
  • Knowledge of computers and software programs including Word and excel
  • Knowledge of packaging operations and/or label inspection desirable
  • Ability to lift approximately 50 lbs
112

Quality Assurance Technician Resume Examples & Samples

  • 3-5 years in Quality Control, Mfg Engineering, wrought alloy processing and/or technical function (R)
  • 1 Safety/Environmental: Support the corporate safety and environmental priority through proactive focus on use of proper PPE and efforts to improve the safety in Haynes’ manufacturing processes
  • Quality: Ensure the quality of the product to the customer by investigation and resolution of product quality, product testing, quality system, conformance to standards, and specification problems
  • Productivity: Have an attitude of timeliness for requested work from manager, colleagues, and key cross functional relations
  • Cost/Stewardship: Demonstrate stewardship in exercising judgment in the use of company resources with regards to the quality group and its resources
  • General: Have an understanding of the Haynes Quality System requirements, the basic ISO, NADCAP, and AS requirements, and basic product and process flows to enable daily support of our quality objectives
  • Quality Assurance Support: (a) Perform internal audits as directed by the lead auditor (b) Work as directed on customer return samples for investigation of root cause of the defects (c) Assist as directed on external and customer audits (d) Work to ensure NCRs have adequate resolution and provide follow-up as directed, (e) Utilize internal procedures and systems to monitor processes for off quality trends and initiate corrective actions, (f) Maintain Approved Vendor List (AVL), (g) Review Quality Clause(s) as requested by Sales, (h) Maintain customer survey data
  • Quality Engineering Support: (a) Provide the Quality Engineering department with support as necessary to meet Quality System requirements involved with new alloy scale-up, special quality, customer samples, customer special requests, and nonstandard processing, and customer audits/plant tours. (b) Initiate Product Reviews on nonconforming material. (c) Provide data analysis on heat treat data for property surveys and function as a backup for the data heat treat reviews for daily annealing
  • Specification Reviews: (a) Assist with test data collection, test data analysis, specification review and other Quality issues including special process requirements as directed. (b) Provide updates on specifications from various customer sites as required to maintain the quality system. (c) Answer technical and specification questions for both internal and external customers
  • Backup Support: (a) Provide back up support to Release and certify material for shipment (b) Serve as backup to the RMA coordinator, (c) Backup for daily scrap and rework report
  • Communication: (a) Effectively monitor, document, and report status, activity, and progress in area of responsibility, (b) Provide required input into the monthly report in a timely manner
  • Project Management: Participate on assigned Quality Assurance & Quality Engineering projects to insure yearly commitments are met
  • Manager-once-Removed: Manager, Quality Assurance
  • Manager: Lead Senior Quality Assurance Engineer and Lead Auditor
  • Direct Reports: None
  • Colleagues: QE and QA personnel, Mfg. Engineering Engineers and Technicians
  • Key Cross-functional Relationships: Mfg. Eng Manager, Manufacturing & Inspection Supervisors, Test Labs personnel, Certifications personnel, Production Control, Sales and Marketing
113

Operational Quality Assurance Technician Resume Examples & Samples

  • Report and documentation related to the inspections
  • You hold an Associate’s degree in a technical field
  • You cumulate a minimum of five (5) years of experience working in an industrial manufacturing environment
  • You have understanding of basic Quality skills (standards, tools), documentation control, configuration management, change management
  • You own good knowledge of the relevant ERP/SAP Systems
  • You have risk and opportunity management skills
  • You own understanding of a typical project organization and how to identify and contact stakeholders
114

Quality Assurance Technician Resume Examples & Samples

  • Receive and process customer orders
  • Effectively interfaces with Corporate Sales, Shipping, Accounting, Production and plant management
  • Monitor freezers and coolers for over-run and product dates
  • Work with shipping verifying efficient shipping of all orders
  • Ensure awareness of production team regarding new and changed orders
  • Function as the customer’s advocate ensuring excellent customer care
  • Direct supervision of 2 – 6 employees
  • This is a Leader of People position with required competencies: Delegation, Conflict Management, Planning, Sizing Up People and Customer Focus
  • 1+ years customer service experience
  • Demonstrated strong customer focus
  • Ability to maintain professionalism in stressful situations
  • Ability to interact with all levels of the organization
  • Ability to transition quickly between existing and new responsibilities with minimal direction
  • Demonstrated effective time management skills
  • Excellent organization, follow-up and communication (written and verbal) skills
  • Practical computer skills with solid knowledge of MS Office programs
  • Advanced interpersonal communication skills
  • Ability to speak, read, write, and comprehend English fluently
  • Demonstrated sound work ethic, honesty and moral character
  • Demonstrated ability to lead, develop and motivate people
  • Understand and interpret data while drawing logical conclusions based on available inputs
  • Critical thinking skills in standardized situations as well as non-routine problems
  • Manage multiple tasks and projects simultaneously and prioritize work accordingly
  • Basic reasoning skills and carries out instructions furnished in written, oral and diagram form
115

Quality Assurance Technician Resume Examples & Samples

  • Sample products at various stages of processing, including Brix, pH test and water activity
  • Examine finished products by sight, taste and weight to ensure conformance to company and legal standards
  • Perform routine checks for product packaging quality, including date codes, film seal and palletizing formation
  • Set up and challenge of metal detector and x-ray machines
  • Manage rework and WIP to ensure code dates are maintained through the process and FIFO is followed
  • Check incoming and outgoing shipments for quality and verify orders are correct
  • Calibrate equipment daily, including pH meter, refractometer, water activity meter, and table scales
  • Compile various reports showing analysis of the quality of products produced
  • Monitor Good Manufacturing Practices
  • Assist in training and re-training of employees
  • Verify cleaning and sanitation of production equipment
  • Perform pre-operation inspections at start of production
  • Assist in managing hold and release of non-conforming product
  • Assist in meeting expectations for BRC, organic, peanut-free and Kosher certification
  • Assist production where required
  • Strong attention to detail, sense of urgency, and excellent verbal and written communication skills are required
116

Quality Assurance Technician Resume Examples & Samples

  • Inspect production lines to ensure proper sanitation requirements have been met
  • Ensure product being produced meets the required food safety standards
  • Ensure that established procedures are followed throughout the manufacturing facility
  • Maintenance of QA records both written and electronic
  • All other related tasks
  • Computer skills including MS Word and Excel
  • Comfortable and competent in a lab environment – instrument calibration, record keeping, housekeeping, high attention to detail, etc
  • Demonstrate good judgment and common sense
  • Must be able to work on a rotating shift schedule including evenings and weekends
117

Quality Assurance Technician Resume Examples & Samples

  • Dispositioning of non-conforming material
  • Inspection of loads
  • Managing non-conforming material inventory
  • Investigation of customer complaints
  • Entering requisitions for materials/services
  • Analyzing and ensuring chemical and physical test data
  • Performing preventive maintenance work on lab equipment
  • Performing Chary impact tests
  • Maintaining calibration services on lab equipment
  • Obtaining and performing physical tests as needed
  • Must have legible hand writing
  • Capable of using a calculator
118

Quality Assurance Technician Resume Examples & Samples

  • Oversee, monitor and coordinate all inspection activities
  • Determine inspection points and tools needed to verify the plating process
  • Evaluate mating parts as they apply to the plating process - projecting potential issues and recommending plating thickness, as required
  • Analyze and provide input from customer drawings as they apply to the nickel plating process on metal alloy components
  • Inspect customer parts throughout the process from In-Coming, to In-Process to Final Inspection
  • Determine pass/fail results of the plating process, completing documentation for non- conforming parts, generating NCMRs, maintaining segregation and identification
  • Participate in the improvement of the QA system
  • Provide assistance during the annual calibration process
  • Perform excellent customer service and other related duties apparent or assigned
  • Direct QA/QC experience
  • Measuring parts according to dimensional specifications using calipers, micrometers, various gages and computer driven measuring devices, i.e. CMM
  • Using basic hand tools such as pliers, wire cutters, etc
  • Proficient on MS Word and Excel programs
  • Knowledge of ISO9002 certification
  • Ability to interpret drawings and knowledge of basic machining principles
  • Above average verbal and written skills
  • Experience in a metal plating, machine shop or manufacturing environment
  • Ability to convert all measurements to the metric system
  • Reading, writing and interpreting policies related to quality systems
119

Manufacturing Quality Assurance Technician Resume Examples & Samples

  • Define and use the term 'Quality' correctly, in the context of raw materials, WIP, and finished goods
  • Define a system and process and distinguish between them; understand how the components of a system (inputs/outputs, processes, feedback) impact the system as a whole
  • Understand how process improvements (both Kaizen and Breakthrough) achieve results by identifying and eliminating waste and/or reducing variation and optimizing process performance. Recognize which type of improvement process is appropriate in given situations
  • Use, interpret, and explain flowcharts, histograms, Pareto charts, scatter diagrams, cause-and-effect diagrams, checklists and check sheets, affinity diagrams, cost of quality reports, benchmarking, brainstorming, and audits as improvement tools
  • Understand, explain and apply basic control chart concepts (e.g. centerlines, control limits, out-of-control conditions, and assignable causes of variation) and recognize when control charts should be used
  • Relays appropriate quality results to operating teams (includes presentations during team meetings)
  • Trains production team members in the areas of basic quality and food safety
  • Interacts with Production Team members to improve quality of products produced
  • Maintains the laboratory in accordance with published 6S standards
  • Participates in store and warehouse audits
  • ASQ Certification as a Quality Improvement Associate
  • Basic organization skills
  • Effective communication skills (written and oral), including basic presentation skills in small group settings
  • Basic computer skills (i.e., Excel, Word and In-house systems)
120

Quality Assurance Technician Resume Examples & Samples

  • Communicate quality issues with Production and Quality Management and assist in root cause analysis and implementation of corrective actions where appropriate
  • Perform investigative environmental swabbing of critical production equipment/areas as a troubleshooting guide
  • Assist in investigations in response to customer concerns or other quality related deviations to determine root cause and appropriate corrective actions
  • Assist in the management of quality hold activities, including non-conforming product inventories
121

Quality Assurance Technician Resume Examples & Samples

  • Coordinate, monitors and checks packages to maximize the quality of products produced
  • Performs and reviews teardowns
  • Maintain a clean and organized workstation
  • Assure package integrity and product quality
  • Ph checks on pre-processed and post-processed products
  • Use solids analyzer
  • Communicate lab data with operators and supervisors
  • Perform a variety of quality checks to assure standards are met
  • Troubleshoot and resolve basic to moderate operating difficulties involving area equipment
  • Performs investigations related to product spoilage
  • Performs incubation activities according to standard timelines
  • Calibrates specified quality testing equipment
  • Accurately prepares and maintains all area paperwork
  • Relieve other production team members for breaks and absences as required
  • Works with minimal amount of supervision
  • Able to evaluate a situation and make a good decision
  • Good past work history
  • Good attendance
  • Able to do repetitive work
  • Able to lift a minimum of 50 pounds and at times more
122

Quality Assurance Technician Resume Examples & Samples

  • Responsible for quality processes of in-coming inspection of finished goods and raw materials
  • Responsible for reviewing the inspection results to ensure compliance with the applicable specifications, understanding the technical meaning of such results
  • Conduct internal quality audits
  • Inform the Product Quality Release Supervisor about deviations and be capable to work with product development to define quality attributes and acceptance and rejection criteria for Plexus products and materials
  • Prepare and distribute non-conformance reports per established procedures
  • Conduct audits of vendor in-process and Acceptable Quality Limit (AQL) inspections and write audit reports per established procedures
  • Collect, analyze, present, and maintain data to report and track conformance to quality requirements
  • Conduct in-process product inspection per established procedures
  • Some overnight travel required
  • Travel and work between Tempe and Phoenix locations
  • Commit to working together as one team, exceed service expectations by developing positive relationships and treat others with value and respect…...always
  • High school diploma or GED along with some college in math and science; Bachelor’s degree in microbiology, Chemistry or Food Science preferred
  • Three or more years’ work experience, preferably in a manufacturing or quality assurance area
  • Possess basic understanding of math, statistics and science
  • Ability to work cooperatively and effectively with team members and third party manufacturers
  • Intermediate proficiency of Microsoft Word and Excel and a statistical application
123

Quality Assurance Technician Resume Examples & Samples

  • 35% Accountable for the production of food safe product in a fast paced manufacturing environment; maintain, calibrate, and utilize lab equipment to perform the following physical tests: pH titrations, solids analysis, viscosity, handheld thermometer and probe temperatures, weights/scales, organoleptic/sensory evaluation (sensory is to include but is not limited to completion of cooking for sensory per customer requirement and to assist R&D in sensory panels
  • 20% Tag/Un-tag product while following tag handling procedures and SAP internal/vendor notification procedures. Check in and approve for use ingredients and packaging when received into the facility
  • 20% Self-manage individual annual technician certification, development plan, and all assigned projects to meet specifications and deadlines. In addition, maintain daily, weekly, monthly, quarterly and annual checklists to support and verify the FSQR program
  • 10% Maintain adherence to all Corporate Environmental Health and Safety Policies and Procedures
  • 10% This position shall have the responsibility to report problems with the food safety management system to identified person(s). This position has the responsibility and authority to initiate and record actions. Acquire and maintain knowledge of HACCP/OPRP/PRP (GMP) policies and requirements to complete all monitoring and/or verifications tasks as outlined in the Food Safety Management System
  • 5% Perform pre-operational inspection of the production lines and tanks as needed. Perform pre-operational and zone monitoring swabs as required per program
  • No written warnings or supsensions in the last 6 months (CKS Stakeholder)
  • Must have HIgh School Diploma or GED
  • Cargill requires that employees be a minimum of 18 years of age to work in a production facility
  • Right to work in the U.S. that is not based on possession of a student visa or a visa sponsored by a third-party employer
  • Must be able to meet physical demand requirements as outlined in Medical Management Job Analysis (MMJA)
  • Must have knowledge of conversation units of measurement
  • Must be able to utilize knowledge of solids, temperature, PRP's, safety and microbiological sample-s to aid production in problem solving and implementation of corrective action
  • Must be able to read customer specifications and QA checklists
  • Must be able to pull on line microbiology samples according to aseptic procedure
  • Must have good record keeping and organization skills
  • Must know QA job duties well enough to assist in training of new employees
  • Must know how to read HACCP/PRP to check and assure compliance and corrective action taken is completed and correct
  • Must be able to carry out assigned projects without supervision
  • Must be able to communicate with Supervisor and team members concerning safety, quality, and assigned daily tasks
  • Must work cooperatively with Maintenance and all other production teams in scheduling, problem solving, communication of daily operations and business activities
124

Quality Assurance Technician Resume Examples & Samples

  • Conducting tests and inspections of products, services, or processes to evaluate quality or performance
  • Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action
  • The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem
125

DC Quality Assurance Technician Resume Examples & Samples

  • Conduct operational GMP and Food Safety inspections
  • Recommend and establish food safety and quality procedures via written programs that will be implemented in the Sheetz Distribution Center
  • Assist in training and implementation of food safety and quality programs for receiving, storage and shipping of product. Verify compliance to QA programs such as SOP’s, HACCP, GMP’s, Specification Verification, Traceability, Coding, Packaging, etc
  • Conduct verification and validation of HARPC/HACCP program to comply with company quality standards and government regulations
  • Assist in investigating complaints pertaining to product in stores that have been shipped via Sheetz Distribution Center
  • Assist in conducting and investigate receiving temperatures based upon manual temperatures and temperature monitoring devices
  • Assist in conducting evaluations of products received at the distribution center
  • 1 year in food safety or related field
126

Quality Assurance Technician Resume Examples & Samples

  • Assist with the management of the site Chemical Hygiene Plan as directed by Manager-Quality Assurance
  • Participate in weekly lab meetings and 8:00 am cross-functional team meeting
  • Provide analytical support to Texas Operations manufacturing groups. Carry out special projects in support of manufacturing as directed by the Manager-Quality Assurance
  • Support and fill backup role as needed for all required analytical tests on plant wastewater sumps, site wastewater systems, and regulated outfalls
  • Assist Manager – Quality Assurance to control and reduce operating and labor costs as related to the QA department
  • Initiate action as needed to prevent non-conformances. Exercise proactive approach to identify any problems relating to the product, process, or quality system and initiate, recommend, and/or provide solutions as necessary
  • Assist the Manager-Quality Assurance in development, review, and revision of Quality Assurance procedures
  • Associate of Science degree in chemical technology or closely related field
  • Minimum of 2-5 years’ experience in chemical process industry with petrochemical laboratory practices & standards are desired
  • Working knowledge of chromatography, analytical software, and basic troubleshooting skills desired
  • Proficient in MS Office software & common applications along with lab info mgmt systems. (LIMS)
  • Self-motivation and ability to function at a high level without direct supervision
  • Develop positive, effective relationships with all departments that interact with and are supported by QA
  • Possess technical skills to evaluate and recommend improvements to QA processes
  • Willingness to learn and develop new skills to enhance the position and team
  • Pass medical and physical exams and remain capable in accordance with the prescribed “Fit for Duty” job analysis
127

Quality Assurance Technician nd Shift Resume Examples & Samples

  • Decision Making through Data
  • Gap Analysis Action Planning
  • Influencing
  • Physical Capability of Lifting more than 50 lbs
  • Continous Improvement
  • Flexibility for Weekend Work when Needed for Reading Plates and Quality Support for Saturday or Sunday Production
  • Water Processing
  • RO System
  • Hygiene
  • GMP’s
  • CIP and Cleaning Systems
  • Understanding of processes
128

Quality Assurance Technician Resume Examples & Samples

  • Perform all quality testing as outlined in QMS and ensure regulatory requirements are met
  • Perform and report all chemical testing as required by NWNA, including bromate analysis
  • CIP program and Pest Control Program monitoring and record keeping
  • Provide leadership for NWNA quality initiatives and both internal and external audits
  • Manage and maintain SOP, documentation and records in Teamroom location
  • Review / monitor consumer complaints and perform complaint closure as needed
  • Provide backup / support for QA positions as needed
  • Maintain / create all SOPs relevant to position
  • FSBO and SBO program participation
  • Support factory Release Program
  • Bachelor of Science Degree in Microbiology, Food Science /Technology or comparable Science field required
  • Minimum 1 year food / beverage manufacturing experience
  • Knowledge of water chemistry and experience working with chemicals
  • Strong microbiology / science background
  • SPC knowledge is preferable
  • CIP and cleaning systems and procedures is preferable
  • Corrective / preventive action knowledge and understanding
  • Understanding of microbiological principles and test procedures is preferable
  • Able and willing to work 12 hour shifts including the potential for nights, weekends and holidays
  • Ability to move/handle 50 lbs and stand on your feet for long periods of time throughout the day
129

Quality Assurance Technician Resume Examples & Samples

  • 3 years of experience in Quality in a manufacturing setting required
  • Excel experience required
  • Metal knowledge and experience with steel preferred
  • Experience with ISO Standards preferred
  • Experience with Faro Arm, micrometers, and calipers preferred
130

Quality Assurance Technician Resume Examples & Samples

  • Understand the difference between Partner empowerment and involvement and benefits of both
  • Understand and apply the concepts of internal and external customers and suppliers to improve processes
  • Understand and use different types of customer and supplier feedback (e.g. surveys, ratings, customer complaints, Defect Detection and Control (DD&C)) and understand the value in using data to drive improvement
  • Basic knowledge and use of standard laboratory equipment to perform laboratory tests and exams
  • Perform routine tests of finished product, work-in-process and raw materials and compares results against specifications to determine quality status (may include chemical, microbial, or physical tests/exams)
  • Associates Degree Required (Two years
  • Requires Basic PC Skills
  • Basic knowledge and understanding of H-E-B Quality, Environment and Safety (QES) standards or demonstrated ability to learn and apply such standards
  • Basic knowledge of ISO-type Quality System and Hazard Analysis of Critical Control Points (HACCP)
  • Knowledge and maintenance of Good Manufacturing Practices (GMP's)
131

Quality Assurance Technician Resume Examples & Samples

  • Performs inspections in production areas
  • Determines chemical and physical characteristics or composition
  • Calibrates equipment and instruments for use
  • Collects samples and prepares for transport
  • Tests samples to verify conformity to specifications. Records test results and documents in a tablet results
132

Quality Assurance Technician Resume Examples & Samples

  • Manage and execute the calibration program to make sure all equipment is available as required for production use and ensure department heads manage departmental equipment compliantly per required procedures
  • Assist Engineering in determining new equipment requirements and needs, and incorporate the equipment into the Dymax Calibration and PM systems
  • Support Engineering as required to complete preventative maintenance
  • Assist Engineering as required to perform process and product validation testing
  • Perform, or assist in performing Internal Audits of Quality Management System processes
  • Assist Quality Engineering in performing transfers of product inspection, test, and manufacturing equipment, processes, and records from external organizations to Dymax
  • Assist in maintaining the internal audit plan and drive scheduling and compliance to ensure all requirements of the internal audit program are met
  • Perform duties as a CAPA coordinator and ensure Master Control CAPA system is current and properly maintained compliantly per defined CAPA procedures
  • As required by business needs, support Quality Control activities to ensure that production plans and objectives are completed
  • As required by business needs assist in performing QC Incoming, In-Process, First Article, and Final Inspections following written procedures
  • Assist in performing first article utilizing optical inspection equipment as well as microscopes, loupes, tappi charts, and surface finish standards
  • Review completed process travelers for accuracy and completeness and perform product documentation final release reviews
  • Assist in the establishment, measure, tracking, and trending of quality metrics and objectives
  • Assist in the development of QC Inspection Processes, procedures, documentation, and fixtures
  • Duties require knowledge of inspection/sampling techniques and familiarity with ANSI/ASQ Z1.4
  • Familiarity with FDA QSR and ISO 13485 Quality System Requirements
  • Knowledge of auditing to FDA QSR and ISO 13485 Quality System Requirements
  • Detailed knowledge of mechanical and physical inspection techniques (calipers, micrometers, depth gauges, blueprint reading, CMM or optical comparator, burst test, seal strength, etc.)
  • Good oral and written communication skills, Ability to communicate well with technical personnel
  • Strong familiarity with computer applications such as Microsoft Outlook, Excel and Word
  • Demonstrated strong attention to detail and “do it right the first time” attitude
  • ASQ Certification Preferred
  • 2 Year Associates degree in electronics preferred
  • At least three years experience performing inspections and test within an FDA regulated environment
133

Quality Assurance Technician Resume Examples & Samples

  • Assures finished goods and production processes are within specification and are of the highest quality
  • Assist with the testing and compliance verification of raw materials, packaging components, in-process and finished product specification and processing equipment checks (scales, cooling spirals, refrigeration/freezer)
  • Assist with verifying that COA’s are in compliance with established parameters
  • Assists with maintaining physical inventories on all laboratory equipment, chemicals and reagents
  • Assists with the Hold, Destroy and Recall procedures
  • Assists with maintaining reports as required to track product and process quality, SPC parameters, and vendor reliability
  • Administers retains program
  • Assists with collecting and the testing of micro samples
  • Performs additional duties of a similar nature and level of responsibility as might be required
134

Quality Assurance Technician Resume Examples & Samples

  • Verify products are being produced to specifications
  • Verify products are labeled and packaged properly
  • Verify that company SOPs and SSOPs are followed
  • Food Safety and GMPs
  • Document all audit findings
  • Perform various other duties as needed
  • Knowledge of beef cuts, product codes is preferred
  • Must have good communication and interpersonal skill and maintain a good working relationship with plant management, plant employees, and USDA/FSIS
  • Must have good decision making skills
  • Extended walking and standing
  • Ability to lift 60+pounds repeatedly
135

Quality Assurance Technician Resume Examples & Samples

  • Under the guidance of the QA Supervisor, the QA Technician will be familiar with all JBS product specifications and standard requirements for manufacturing our products
  • Monitors production staff’s adherence in meeting product specification
  • Works directly with production staff on testing protocols and requirements to meet and exceed USDA food quality and safety requirements
  • Ensures production management is aware of any possible deviations from or violations of USDA regulations or HACCP requirements
  • Assist in the testing and evaluation of new equipment and process instructions to effectively meet product specifications
  • Conducts quality audits and product quality checks.As directed, conducts mock and real time product recalls to test food safety and quality processes
  • Maintains lab equipment, including ensuring proper cleaning and regular maintenance
  • Prepares reports as necessary to record findings and recommendations from testing
  • Incumbents will have a 2 to 4 year college or university Degree or diploma in an appropriate scientific discipline or equivalent experience, preferably supplemented by 2 – 4 years of related experience within the food processing sector.Experience with meat processing equipment and product specifications will be beneficial
  • Proficiency with Microsoft software applications is required, as are excellent communication skills, both written and oral
  • An ability to utilize standard statistical methodology and good analytical capabilities are essential for success in this position
136

Ground Beef A-shift Quality Assurance Technician Resume Examples & Samples

  • Aid QA supervisor and management in gathering data for investigations
  • Work closely with production associates in monitoring meat product for specifications, and correcting specification deficiencies
  • Assist in other duties as needed
137

Quality Assurance Technician Resume Examples & Samples

  • Ensuring that CPS Corrective Action Requests are responded to and verified for timeliness, effectiveness, and adequacy
  • Ensuring CPS equipment identified as critical is maintained as required
  • Ensuring CPS supplier performance is tracked and evaluated by utilization of the Supplier Module
  • Oversight of CPS in-process inspections and in-bound raw material inspections performed by QC
  • Assurance that Good Documentation Practices are followed
  • Associates Degree of High School Diploma with relevant QA/QC experience
  • ASQ Certified Quality Auditor (CQA) Certification preferred
  • One year of related experience or related medical devise/pharmaceutical QA/QC experience
  • Proficiency (intermediate or advanced) with Microsoft Word & Excel
  • Demonstrated mathematical ability to count accurately when required and follow sampling methodology
  • Ability to critically evaluate, follow, and audit written instructions
  • Must be able to manage multiple, complex instructions simultaneously
  • Ability to work independently without constant supervision
  • Ability to interact with co-workers at all levels and present findings in a neutral manner, fostering continuous improvement and a collaborative environment
138

Quality Assurance Technician Resume Examples & Samples

  • Developing plans, with the assistance of Engineers and Manufacturing personnel, for segregation, processing, and documentation of non-conforming hardware
  • Maintenance of computerized records of activities associated with non-conforming hardware
  • Managed the internal MRB inventory
  • Perform dimensional measuring and maintain material traceability in accordance with ATI policies
  • Communicating and coordination with multiple departments
  • Prepare reports and presentation
  • Operate a forklift and other machinery as needed
  • Ability to move parts and machinery throughout the plant
  • Other job duties as assigned
139

Quality Assurance Technician Resume Examples & Samples

  • Set up, issue, and log gauges. Calibrate and enter into Gagetrak as required
  • Work safely at ALL times and comply with safety regulations regarding the use of protective equipment or devices
  • Keep work area, equipment, storage area, etc. clean and orderly at all times
  • Assist in new product development (such as testing, ordering gauges and keeping up to date files on all testing.)
  • Must perform as a team member with the willingness and attitude to work with others to resolve problems. Must also maintain a good working relationship with others within the organization
  • Use of shop math and the ability to read calipers, micrometers and blueprints
  • Ability to work independently and make judgment decisions as to the quality of the product
  • Prior quality experience or education
140

Quality Assurance Technician Lead Resume Examples & Samples

  • Perform variable and attribute inspections on incoming product
  • Ability to read and interpret blueprints and related documents
  • Possess a basic knowledge of and ability to properly use micrometers, height gages, dial indicators, threaded ring and plug gages and various other hand-held measuring devices
  • Operate Video Measuring Equipment, Microscopes and Optical Comparator
  • Familiar with functional testing methods such as Hydrostatic Testing, Impact Testing and various destructive testing
  • Read various sampling plans and document findings in accordance with company policy and procedure
  • Knowledge of MRB process and disposition materials
  • First article inspections – Perform variable and attribute inspections on new products and document findings in Microsoft Office Word and/or Excel
  • Perform calibration of all variable and attribute inspections. Use the Inspection database to document findings, enter new instruments in the database, remove items from service, manage calibration schedule and maintain records and certificates of calibration
  • Perform EFD internal audits
  • Statistical Process Control as it applies to production runs, Quality Assurance studies, first articles and capability studies. Create SPC data charts for Cp studies and assignable cause investigations
  • Problem Solve, trouble-shoot problems, assist engineering and/or manufacturing in production or customer complaint issues in order to find assignable causes
  • Serve as back up for solder QA technician
141

Quality Assurance Technician Resume Examples & Samples

  • Black Box testing
  • Write test cases for the new feature, modifying and maintaining the existing test cases
  • Understand and ramp up on QA procedures, guidelines and policies for newly launched feature and apply them
  • Use software tools for QA, fix up and data capture on a daily basis
  • Be proactive in identify issues, deep dive, troubleshoot, communicate to stake holders and escalation of issue and providing status reports
  • Be part of a highly charged work environment
  • A graduate in Quantitative fields such as science and engineering. (0-2 experience)
  • Manual QA experience\Ability
  • Ability to writing new test cases for the feature, execute and maintain
  • Break the code attitude
  • Good understanding in one scripting language
  • High level of energy and proactive nature. A sense of ownership and drive and a willingness to accept the challenge of daily deadlines is essential
142

Quality Assurance Technician Resume Examples & Samples

  • Floor inspections of all areas of manufacturing and production: Receiving, Warehouse, Weight room, Blend, Presses, Encapsulation, Polish, Sort, Coating, and Shipping
  • Review manufacturing paperwork
  • Inspect finished product before shipment
  • Document Control: Assist in the review of all quality-related documents
  • Understand and abide by the policies detailed in the Employee Handbook
  • Due to changing workloads, employees will be required to work in multiple areas and may be required to perform other duties or tasks on an as needed basis
143

Quality Assurance Technician Resume Examples & Samples

  • Calibrate equipment / tools and record calibration information in database
  • Perform basic repair and PM on production and test equipment (leak detectors, torque tools, run test equipment, etc.)
  • Evaluate dimensional characteristics of components using a micrometer, calipers, etc
  • Assist operations in troubleshooting and resolving test and/or equipment issues
  • Recommends changes in circuitry or installation specifications to simplify assembly and maintenance
  • Works in cooperation with engineering, technical, maintenance, operations, or outside-of-company personnel when directed or as necessary
  • Perform other duties as assigned to support the operation
  • Ability to read and understand blue prints, schematics, and BOMs
  • Ability to troubleshoot equipment based on blueprint/schematics and issues noted
  • Ability to obtain, interpret and apply information to make sound decisions
  • Ability to properly use a mircrometer and calipers
  • Working knowledge of computer systems
  • Must have interpersonal, verbal/written communication skills
  • Willingness to work a flexible schedule, covering vacations and absences as needed with minimal notice
  • Prior experience using testing equipment in a manufacturing environment
144

Senior Quality Assurance Technician Resume Examples & Samples

  • Provides support to manufacturing operations in the review of products and of engineering and manufacturing processes
  • Performs product audits in accordance with Rockwell Collins/customer/industry standards, reports results, assigns and monitors follow-up actions
  • Provides guidance on inspection (audit) personnel on workmanship standards
  • Applies quality standards for receiving, in-process and final inspection in accordance with Rockwell Collins and contractual requirements
  • Evaluates Rockwell Collins products and processes
  • Maintains quality data records, compiles information, and prepares reports
  • Performs preliminary review and Material Review Board analysis and disposition of nonconforming material
  • Performs duties required by the Quality Management System
145

Quality Assurance Technician Resume Examples & Samples

  • Read, analyze, and interpret engineering drawings, technical procedures and specifications
  • Write business correspondence, and procedure manuals
  • Effectively present information and respond to questions from groups of managers, as well as peers from other departments
  • Knowledge of the following software desirable: MS Office, MS Outlook (e-mail), Google Office
  • Ability to work hands on mechanical and fabrication techniques
  • AS degree in Engineering Technology, Electronics or equivalent
146

Quality Assurance Technician Resume Examples & Samples

  • Experience/Training in Food Manufacturing
  • Knowledge of aseptic technique required
  • Basic knowledge of computers skills
  • Communication Skills: Strong verbal and written skills
  • Special Skills: Ability to work in production or warehouse storage areas
  • Experience/knowledge of sanitation processes, proper technique, and cleaning chemicals is preferred
  • Proficient knowledge of SQF
147

Quality Assurance Technician Resume Examples & Samples

  • Monitor quality control on a food production line
  • Perform all testing and verification of equipment, product, packaging, and coding parameters as required by Standard Operating Procedures, and according to the specifications for the specific product being manufactured. Communicate to appropriate production staff, maintenance staff, or management when problems arise
  • Record problem and solution on appropriate forms
  • Verify ingredients staged for production are correct per the recipe requirements
  • Check seals, date codes, and temperatures every hour and verify metal detector to ensure satisfactory results
  • Must follow all employee safety, food safety, and quality procedures and Good Manufacturing Practices (GMP’s)
  • Calibrate and clean instrumentations to ensure results are correct
  • Must be able to work any shift and weekends when required
  • Must wear all required PPE as required such as protective gloves, aprons, and safety glasses
  • Leadership and ownership of the department, job responsibilities and job functions
  • Ensure that packaged product meets all quality specifications
  • Must be able to work independently, with little or no supervision, as well as professionally with other team members
  • Complete all required production paperwork as required in a neat and professionally manner
  • Strictly adhere to all safety policies
  • Committed to ensuring that the products produced meet all food safety and quality requirements
  • Passing of background and drug screens
  • A desire to succeed and good work ethics are required
  • High-energy, flexible, self-starter, hands on, comfortable with little or no administrative support
  • Team player with a sense of urgency and a self-accountability mentality
  • Knowledge and understanding of food safety / HACCP, GMP’s, Allergen Controls, Sanitary design/controls, pest control, basic food regulations, specifications, and basic food technology
  • Able to work with minimal amount of supervision
  • Good past work history and good attendance
  • 3 to 5 years’ experience in food production and understanding of Food Safety / HACCP, GMP’s, Allergen Control and Sanitation
148

Quality Assurance Technician Resume Examples & Samples

  • Responsible for testing and evaluation of new products to ensure conformance to company and customer specifications
  • Assure that corrective and preventative actions are implemented when non-conformities are found
  • Identify, investigate, and communicate process non-compliances and product nonconformities
  • Perform incoming and first article inspections, corrosion tests
  • Initiate process control techniques
  • Collect and compile process control and capability data, communicating the data to the relevant personnel
  • Prepare and deliver training to production operators on measurement, use of gauging, inspection procedures as well as Valmont procedures
  • Design check fixtures
  • Order gauging as needed
  • Develop work instructions, process aids, and forms
  • A High School Diploma / GED
  • Five years of professional work experience in a quality assurance role, preferably in a manufacturing or fabrication environment
  • Certified Quality Inspector (CQI) accreditation from the American Society for Quality (ASQ-CQI) and Certified Quality Technician (CQT) certification from ASQ or AWS (American Welding Society) Certified Welding Inspector (CWI) accreditation
  • A valid U.S. driver’s license
  • The ability to safely lift up to 20 pounds frequently throughout the shift
  • A strong working knowledge of Microsoft Word, Excel, and Outlook
  • An Associate’s Degree in Quality, Business or related field
  • NDT (non-destructive testing) experience
  • Engineering background (education or experience)
  • Experience operating QAD Enterprise Application (formerly QAD MFG/PRO) software in a professional environment
  • Experience interpreting engineering specifications such as ASTM
  • A strong working knowledge of Microsoft Access
  • 2017-04-25-07:00
149

Quality Assurance Technician Nights Resume Examples & Samples

  • Conduct post cleaning and pre-op inspections
  • Conduct allergen and micro testing and swabbing for cleaning verification for equipment and tools
  • Approve mixes for lines startup
  • Ingredients and packaging verification at start up and throughout the production runs
  • Allergen testing of extruder head and finished good samples
  • Conduct microbiology of finished goods samples and plant 3 samples and R&D samples
  • Conduct hourly metal detector checks
  • Calibrate equipment
  • Issue material and finished product non-conformance hold, release and destruction
  • Sample request for product evaluation
  • Assist in quality assurance data management. Database Maintenance
  • Stocking and inventory of lab supplies
  • 5S the lab
  • Documents review
  • 1 year of QA Laboratory experience
  • Must adhere to strict “Good Manufacturing and Laboratory Practices” and Safety for work in a food environment
  • Effectively handles and communicates quality control issues with a sense of urgency and importance
  • Reads, writes, speaks, interprets, and understands detailed English written and verbal instructions, policies, and procedures
  • Working conditions frequently includes a cool indoor food production environment with water on the floor, and occasional freezer environment, and intermittent outdoor environment. Clean environment, requiring hand washing every time you go on the floor 20+/- times a day. We have allergens such as tree nuts, soy, peanuts, cinnamon, and coconut in the work environment
150

Shift Quality Assurance Technician Resume Examples & Samples

  • Verify proper set-up of production lines at start-up and shift change: Printer set-up (coding), packaging materials, labeling, quality limits, etc
  • Verify sanitary condition of production lines prior to start-up and after downtime requiring maintenance activity
  • Verify compliance with label stated weights and associated regulations for all products
  • Communicate quality issues with Production and Quality Management and assist in root cause analysis and implementation of corrective actions where appropriate
  • Perform investigative environmental swabbing of critical production equipment/areas as a troubleshooting guide
  • Assist in investigations in response to customer concerns or other quality related deviations to determine root cause and appropriate corrective actions
  • Assist in the management of quality hold activities, including non-conforming product inventories
  • Ensure adherence to company Good Manufacturing Practices, customer specifications, and internal product specifications at all times
  • Expected to adhere to safe work practices, follow GMP and HACCP guidelines, maintain sanitary conditions and ensure that product quality is maintained. Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety
  • Performs other duties as assigned
151

Quality Assurance Technician Resume Examples & Samples

  • Performs QA SOP's with little supervision
  • Inspects and releases/or rejects assembled repackaging material to production
  • Inspects production rooms for cleanliness
  • Competent in editing batch records and compiling constructive narrative information pertaining to batch production
  • Inspects and releases quarantined repackaging material or rejects
  • Ability to handle a variety of tasks simultaneously
152

Quality Assurance Technician Resume Examples & Samples

  • Inspect purchased and internally manufactured product for specified requirements, critical dimensions, completeness, transit damage, and customer compliance
  • Perform final release of end items prior to shipment
  • Enter Non-Conformance Reports (NCR’s) into the computer system, making certain that information is accurately conveyed to all departments. Work with engineers to determine disposition. Lead corrective actions for problems when required
  • Use a variety of gages and QA tools to perform product inspections, including calipers, micrometers, tape measures, durometer testers, brinell hardness testers, FARO arms, and many more. [Training for these will be provided.]
  • Author quality documentation (SOPs, PCCs) for use in the plant as required
  • Provide assistance for ISO audits
  • Ensure compliance with all safety and work rules and regulations. Ensure the maintenance of departmental housekeeping standards. Assist and support continuous safety, health, and environmental improvement activities
  • Participate on cross-functional teams to ensure the continuous, ongoing improvement of processes, methods, productivity and quality, while reducing costs
153

Quality Assurance Technician Resume Examples & Samples

  • Responsible for the official release for all ingredients and finished goods
  • Communicates with production staff and maintenance staff to continuously improve quality and production
  • Prepares and submits samples for outside lab testing
  • Prepare shipments & documentation of product samples and bags to customers via UPS and FedEx
  • Micro duties which include plating, reading and interpreting results against known specifications. This requires basic math skills of averaging and knowledge of making dilutions. Various micro testing is conducted on powders, liquids, swabs, filters and air samples
  • Preoperational Inspections. This requires inspecting equipment before production startup and taking ATP and micro swabs to validate results
  • Incoming Ingredient analysis. This requires compositing powder samples, running various chemical, micro and physical analytical testing and reporting these results on a Certificate of Analysis. Results are compared against known standards for interpretation
  • Finished product analysis. All finished product has a Certificate of Analysis generated on it. Testing is in accordance to customer specifications which vary per product. Various tests may include Standard Plate count, Coliform, yeast & mold, viscosities, particle size, bulk density, moisture, solids, Dextrose Equivalency, protein, fat, scorched particle, PH, titratable acidity, flavor and separable solids. New tests may be brought in by the customer for their particular product
  • Sample taking. Aseptic samples are taken twice per shift from various ports located throughout the facility. Finished product bags may have to be sampled for troubleshooting purposes
  • Prepares chemical solutions according to standard formulas
  • Housekeeping – responsible for keeping work area clean and other various areas listed on the master cleaning schedule
  • Planning and organizing. The ability to prioritize and use time efficiently
  • Communication – needs to be able to effectively communicate discrepancies to Supervisor and key staff personnel when a problem is detected
  • Quality – demonstrate accuracy and thoroughness. Detail oriented
  • Quantity – must be able to multitask and completes tasks on time or notifies appropriate person with an alternate plan
  • Safety and Security – Observes safety and security procedures; uses equipment and materials properly
  • Dependability – follows written instructions and Standard Operating Procedures, takes responsibilities for own actions, good attendance record
  • Ability to smell and taste
  • Cannot be colorblind in order to interpret many test results
154

Quality Assurance Technician Resume Examples & Samples

  • Collect, document and establish baseline process data
  • Conduct trials, document and compile reports summarizing results
  • Organize, compile and submit regulatory or compliance reports as required
  • Complete and document material and process tests (at established frequencies) such as but not limited to
  • Computer skills are essential (MS Office)
  • Must be able to stand, walk and use tools continually, as well as frequently reach and climb stairs
  • Must be able to tolerate elevated heights and extreme temperatures
  • Work requires performing task in all weather conditions
  • Respirator and hearing protection required in some areas
  • Degree or technical certification
  • Quality systems and lab testing experience
  • Statistical analysis software and tool use
  • Lean manufacturing experience and application of tools
155

Quality Assurance Technician Resume Examples & Samples

  • You generate breakthrough ideas:Work with product/process development to establish formulation methods that ensure the production of consistent quality products. Review new and revised product formulae to ensure that they conform to quality standards and are capable of meeting specification
  • You execute flawlessly, track & optimize:Lead the sensory evaluation of in-process materials and finished products and make the necessary formula modifications as required to maintain or improve product quality as a consequence of ingredient or process variations
  • Familiar with quality/food safety programs including HACCP, SSOP, Integrated Pest Management, FDA cGMP, TPM, WCM, Statistics including SPC and SAP/Interspec preferred
  • Computer skill with MS Office –excel, word required
156

Quality Assurance Technician Resume Examples & Samples

  • Selects products for testing at specified stages in the production process, and tests for a variety of qualities including chemical/physical characteristics, microbiological integrity, and sensory evaluation requiring taste & smell
  • Maintains lab equipment and supplies
  • Maintain Good Laboratory Practices (GLP’s)
  • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and regulations. Ability to write routine reports and business correspondence. Ability to effectively present information and respond to questions from other work groups in a professional manner
  • Ability to work with mathematical concepts such as probability and statistical analysis. Ability to apply concepts such as fraction, percentages, ratios, and proportions to practical situations
  • Ability to define problems, collect data, establish facts, and draw extensive variety of technical instructions in mathematical or diagram form and work with abstract and concrete variables
  • Understanding of calibration programs of dairy testing equipment
157

Quality Assurance Technician Resume Examples & Samples

  • Under minimal supervision, communicate with Production & QA Team Members, Team Leaders, and Supervisors to assure proper handling of all products and timely correction of deficiencies
  • Monitor lines and paperwork throughout the day to assure specification compliance for each product
  • Assist in making sure all quality and food safety policies and procedures are being followed
  • Minimum 1 year experience in quality assurance or 6 months Wayne Farms employee
  • Intermediate math (add, subtract, multiply and divide) and computer skills
158

Quality Assurance Technician Resume Examples & Samples

  • Helps in the development and application of effective quality and food safety plans to ensure full compliance to management system standards requirements and specifications. This also includes labeling and certification (SQF, Kosher, Organic) requirements
  • Assist in maintaining change control processes for new documents and document revisions, including the distribution of approved copies of documents and the collection and destruction of obsolete versions
  • Conducts and participates in the review of internal monthly food safety audits, record and report findings, evaluate and validate corrective actions over time
  • Facilitates training to operations personnel on food safety programs
  • Participates in the implementation of quality improvement initiatives to reduce process variation and prevent process and product nonconformities
  • Work with the QA personnel to review proposed product specification changes, or new product offerings prior to implementation, to help assess the impact on product/process quality requirements and helps to implement appropriate changes as needed
  • Represent the customer perspective – help to answer all anticipated customer questions during the issue resolution process
  • Support the business goals with other related duties as business conditions warrant and are directed
  • Use quality tools such as Root Cause Analysis (RCA) to troubleshoot, identify, and analyze problems to the root cause level, and work with the appropriate teams to implement corrective actions and ensure the identified root causes are resolved
  • Support activities to build quality into the product through process and system improvements, proactive planning, and responsive reactions to emergencies in a structured approach to resolve root causes
  • Document data and facts in clear and easy to understand formats in order to work issues most effectively
  • Perform thorough research and clearly document and articulate reasoning used during the problem solving process
  • Define alternatives and recommend corrective actions to root causes identified for issues or potential issues
  • Take initiative and responsibility for needed actions to support quality and business goals
  • Understand the process areas for which you have responsibility, as well as other input and or output processes that may have an impact relationship. Effectively monitor defined process control points and work with process teams to analyze data, address negative trends and effectively resolve identified nonconformances in process or product according to approved procedures
  • Ensure the rigorous application of standards and the compliance to specifications from a quality standpoint
  • Support and prepare regular reporting of measures that reflect process outputs and customer requirements / expectations
  • Help to define, develop, and maintain quality information records
  • Help our teams on defect containment, failure analysis, preventative actions
  • Assists in communications to internal customers from a quality standpoint, and for facilitation of processing of nonconforming material
  • Use basic quality principles, tools, and continuous improvement initiatives. Train others as you develop expertise
  • Conduct a quality test/inspection plan (as appropriate for area(s) assigned) for periodic reporting and comparison to field data
  • Help to maintain a food safety and quality management system that provides timely and accurate data collection and analysis. Strive to improve user-friendliness of applications and broaden the visibility of data-turned-into-knowledge
  • Customers - Assure internal and external customer satisfaction by understanding expectations, establishing open 2-way communication and meeting our commitments
  • Multitasking is required daily, and constant assessment of prioritization is required to best meet both the customer and business needs
  • Must work effectively in team environments, communicating and participating in a constructive manner
  • Must be proactive, anticipating and planning to meet objectives by finding ways to identify potential obstacles and improve processes and procedures to prevent occurrence
  • Follow all policies, procedures, ergonomic standards and safety requirements directed by Keurig Green Mountain and the department
  • High School or GED equivalent certification required
  • 5+ years of Quality Assurance experience in the food industry required
  • 2-4+ years experience in a production environment required
  • Coffee sensory process experience desired
  • Manufacturing experience in the food industry desired
  • Statistics and analytical experience desired
  • Skilled in Microsoft office products; especially Excel
  • Ability to prioritize in a dynamic environment
  • Ability to get along with others, be punctual, and follow instructions
  • High level of self-initiative
  • Technical skills and QA Lab tools experience – broad exposure base desired
  • Appreciation and passion for coffee preferred
  • Ability to uphold Safety standards, participates in Continuous Process Improvement on the job, and follows our Manufacturing best practices
  • Ability to follow Keurig Green Mountain policies and procedures as well as our Operating principles
159

Quality Assurance Technician Resume Examples & Samples

  • Associate’s degree in relevant field and a minimum of 5 years relevant experience in an ISO certified manufacturing environment OR, an equivalent combination of education and/or experience
  • Proficient in the use of MS Office, Word, Excel, Outlook
  • AQS Certified Quality Auditor
  • AQS Certified Quality Engineer
  • Experience with Title 10 CFR Part 50 Appendix B requirements
  • Proficient in the use of SAP
160

Quality Assurance Technician Resume Examples & Samples

  • Proficient in general laboratory techniques, have experience in performing a variety of methods utilizing both wet chemical and physical testing methods and performing instrument validations
  • Know how to: perform validation protocols and follow Standard Operation Procedures (SOP)
  • Handle laboratory projects and investigations
  • Summarize, report and/or review findings
  • Perform daily tasks within laboratory to ensure compliance with Standard Operation Procedures (SOP) and Good Laboratory Practices
  • Good organizational and time management skills
  • Hands on knowledge of physical testing equipment such as MFI, tensile/compression testing, hardness and thickness testing, as well as small scale extruder experience
  • Experience with basic laboratory equipment such as balances, and titration equipment
  • Comfortable working with hazardous materials and understanding the proper chemical handling, use, storage and disposal and safety equipment
  • Must be knowledgeable of MSDS's and the metric system
  • Able to work independently and interact with the Plant Operating personnel group on a regular basis both written and verbally
  • The ability to interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • The ability to communicate effectively with other employees within the organization
  • The ability to read, analyze, and interpret s technical procedures and applicable governmental regulations
  • Must be proficient and comfortable working with a variety of software systems for instrument control and reporting of results and well as with Microsoft word, Excel, and Power Point
  • Must be comfortable performing set routine tasks in an established time frame as well as working on independent projects requiring detailed reporting and observations
  • Ability to work a Rotating Shift which may vary from a 8 to 12 hour schedule
161

Quality Assurance Technician Resume Examples & Samples

  • Role model for safety
  • Inspect and determine the quality of incoming raw materials
  • Audit the various plant manufacturing processes to internal specifications
  • Identify nonconformance and assist with root cause analysis and corrective action
  • Communicate and document quality observations and resolutions
  • Use proper measurement techniques and follow established testing procedures to determine product conformance to specifications
  • Perform data entry and maintain filing system
  • Assist with third-party audits, testing and calibration
  • Complete assigned projects
  • Work with the manufacturing team in optimizing plant processes
  • High school diploma or equivalent required
  • 2-4 year college degree preferred
  • Three years experience in quality assurance or in wood products manufacturing required. Some experience may be waived depending on degree
  • Lean manufacturing experience preferred
  • Able and willing to be certified in CPR/First Aid
  • Must have a professional appearance and behavior
  • Ability to type 30-50 wpm; ten-key preferred
  • Work productively and safely with minimal supervision
  • Good math skills including college level algebra and statistics
  • Proficiency in the use of office software: spreadsheets, databases, word processing and presentations; software programming language experience is a plus
  • Able and willing to lead and coach other employees in quality procedures
  • Able and willing to advance to higher levels of responsibility
162

Quality Assurance Technician Resume Examples & Samples

  • Fill out the Quality Assurance Daily Reports
  • Pick up a complete shot of parts off of each Injection press that is running
  • Cool parts in the QA lab
  • Check the colors using the Densitometer, color chips, and/ or signed samples
  • Check the jobs on the Injection floor and document findings
  • Size parts and document findings
  • Notify GL’s and QA Manager of defects and size problems found
  • Weigh parts and document findings
  • Perform a squeeze test, lid fit test, and leak test if applicable
  • Check the jobs on the Printing floor and document findings
  • Check coreshift
  • Check Rigidity
  • When samples are being run in Injection refer to the QA sample procedures
  • Route all papers to be filed into appropriate folders or files
  • Any special tasks as assigned by QA Manager or Group Lead
  • Good work and attendance record at Berry
  • Good color perception
  • Self motivated
  • Previous quality experience preferred
  • Knowledge of product preferred
  • Computer knowledge
  • Must be able to lift 30lbs
163

Quality Assurance Technician Resume Examples & Samples

  • 70% - Reviewing batch records, positive release of raw materials and finished goods, sending samples for analysis, comparing assay results to specifications, documentation of all the previous tasks. Testing ingredients and finished products with the NIR. Checking labels and reconciling to those issued
  • 20% - Conducting daily inventory, determine status of returned goods and perform investigations related to complaints or manufacturing issues
  • 10% - Audit facility for compliance to SOP’s. Other duties as assigned
  • GED or HS Diploma
  • Ability to work neatly, accurately, and independently
  • Possess good communication and organizational skills
  • Ability to do mathematical conversions
  • Ability to lift over 55 lbs
164

HDL Quality Assurance Technician Resume Examples & Samples

  • Facilitate inspections of both inbound and on-hand merchandise based on facility-based needs
  • Ensure all product is labeled appropriately from vendor for compliance
  • Maintain effective communications and relationships with Field Quality Assurance Team as well as onsite leadership, to include reports, photos, and video as necessary
  • Flexibility to work variable shifts
165

Quality Assurance Technician Resume Examples & Samples

  • Conducting source, subject and record provider re-contacts to ensure quality and integrity investigations are being conducted
  • As needed, review Field Investigator notes to ensure notes meet standard, follow up with Regional Managers and Investigators
  • Review and follow up with appropriate managers regarding any quality control issues with Field Investigators
  • Coordinate with coworkers to ensure that all audit programs are current and efficient
  • Investigate and research complaints both internal and external and report those findings to Customer and internal management
166

Weekend Quality Assurance Technician Resume Examples & Samples

  • Maintaining quality metrics to monitor quality levels
  • Identifying areas for improvement and implementing effective, permanent and systemic solutions
  • Assisting with problem solving/process improvements related to product quality
  • Following and working to ensure HACCP and GMP guidelines are followed
  • Working closely with cross functional teams to support continued growth and success
  • Knowledge of GMP's, HACCP, FDA and OSHA regulations, and Labeling Laws
  • Knowledge of good laboratory practices, techniques and testing/sampling methods
  • Reading and interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals. Writing routine reports and correspondence
  • Preparing samples for testing
  • Performing routine in-process production testing
  • Performing routine raw materials and packaging testing
  • Working in a proactive manner to assist production in determining and maintaining product quality
  • Working in a safe and responsible manner, exercising caution to avoid accidents, prevent injury to people, or damage to equipment
167

Seasonal Quality Assurance Technician Resume Examples & Samples

  • Performs daily chemical tests by operating and calibrating laboratory instruments (pH, turbidity, conductivity meters, autoclaves, microscopes, etc.) and performing dilutions and titrations
  • Manage water receiving and distribution
  • Operate cleaning and disinfection equipment and titration of automatic cleaning cycles
  • Mineral unitizing and batching
  • Operation and monitoring of water processing equipment including filtration and UV disinfection
  • Operates Dionex Ion Chromatograph and Gas Chromatograph
  • Runs Internal Control Plan to ensure equipment is calibrated daily
  • Monitors Hazard Analysis and Critical Control Point (HACCP) program
  • Maintains Quality systems and documentation and develops standard operating procedures (SOPs)
  • Reviews quality inspection checks for accuracy and completeness
  • Place and remove products from hold and update the hold log as required
  • Monitor compliance with Good Manufacturing Practices (GMP) and Sanitation programs
  • Read and comprehend technical manuals for use in completing quality checks and the use of quality related equipment
  • Substitute in microbiology laboratory, understanding aseptic techniques, completing sampling and plating
  • Bachelor’s degree in chemistry, biology or equivalent
  • One to three years prior experience in a laboratory environment conducting chemical analysis
  • Previous experience in the beverage or food industry, especially bottled water preferred
  • Laboratory instrumentation knowledge including chromatography is preferred
  • Strong written and oral communication skills for documentation and interaction with plant personnel, external vendors, customers, business partners and regulatory agencies
  • Strong computer skills including experience with Windows and Microsoft Office products
  • Knowledge of SAP or other enterprise software applications a plus
  • Ability to operate independently or in a team-based environment with minimal supervision
  • Demonstrated organizational, documentation and record keeping skills
  • Strong decision making skills based on analytical data
  • Ability to lift and carry 60 lbs
  • Ability to pinch, grip and carry on a continuous basis
168

Quality Assurance Technician Resume Examples & Samples

  • Review of documentation - test results for components and QA inspection documentation to assure material meets specifications
  • Assisting in determination of corrective action as required
  • Assist management with development of departmental goals and objectives
169

Operational Quality Assurance Technician Resume Examples & Samples

  • Executes inspections at various points in the value chain
  • Raises non-conformance reports in the ERP-system
  • Initiates and supports prioritization of problems and problem solving process
  • Supports Feedback to Workers in case of mayor or recurring quality problems
  • Prepares reports and documentation related to the inspections
  • BAC / BTS degree / 5-10 relevant experience
  • Understanding of basic Quality skills
  • Knowledge of documentation control, configuration management, change management
  • Good knowledge of the relevant ERP/SAP Systems
  • Has an understanding of product and logistic requirements
  • Accurate in initial evaluation and documentation of conformance to requirements and potential causes
  • Language skills: French and Dutch mandatory / English is a plus
170

Quality Assurance Technician Resume Examples & Samples

  • Minimum 6 months of technical services/quality assurance, food safety, auditing, or production experience
  • Understanding of USDA requirements (HACCP). Able to rethink and improve business for continued growth
  • Ablility to prioritize tasks
  • Ability to provide leadership/motivation to engage employees in the business
  • Basic computer and Microsoft Office software (word, powerpoint, excel) skills
  • Ability to learn and use knife skills
  • Internal applicants must have less than 3 attendance points and no written warnings or suspensions in the last calendar year
  • Meat processing experience
171

Quality Assurance Technician Resume Examples & Samples

  • 0-2 years of experience
  • Experience in laboratory testing
  • Proficient in the use of MS Office suite(Word, Outlook, Powerpoint, Access)
  • Ability to distinguish colors
  • Organizational & communication skills
  • Customer Service skills
  • Critical and logical thinking skills
  • Knowledge of mathematics up through calculus
172

Principal Quality Assurance Technician Resume Examples & Samples

  • Knowledge and application of ISO Quality Standards
  • Performing Internal Audits to demonstrate compliance to Waters QMS
  • Issuing and reviewing Corrective and Preventive Actions when necessary to maintain and strengthen the QMS
  • Conduct complaint evaluations and root cause analysis on returned product along with suggesting/initiating corrective action as appropriate
  • Review and approve OOS Reports issued by the Quality Control Laboratory
  • Perform visual, functional, dimensional and performance testing on non-chemical products during incoming inspection
  • Develop and maintain inspection plans for incoming product
  • Support the Supplier Quality Process by issuing, SCARs, Completing desk audits and maintaining supplier files
  • Manage the non-conforming and MRB process for incoming, in-process and returned finished products
  • Ensure that the Control of Nonconforming Product is conducted as required per ISO Quality Standards and Waters QMS
  • Review of Finished Products (including documentation and records related to their manufacture) prior to shipment to customers
  • Support document control functions as necessary
  • BS degree in science, engineering or quality-related field or 3+ yrs of experience related to Quality Assurance
  • Knowledge and/or experience in quality systems
  • Strong communication skills, including effective oral and writing abilities
  • Customer-first approach to dealing with quality issues and challenges
  • Keen attention to detail and effective problem solving skills are highly preferred
173

Quality Assurance Technician Resume Examples & Samples

  • Follow required safety and work procedures
  • Serve as a liasion between Manufacturing and Technical Support Departments to resolve quality issues
  • Assist Quality Assurance Engineers with process and product improvement plans with initiatives focused on the following: continuous improvement of plant processes, process and product audits, developemtn of gauge, fixture and tool calibration program, internal CAR process, quality reporting/escalation, resolving customer issues, andtroubleshooting warranty and customer return items
  • Report quality issues to the Team Leader/Supervisor
  • Maintain a clean and orderly work area to 5S Standards
  • Implement all aspects of AGCO Lean and Quality Management systems
  • Wear required personal protective equipment (PPE) and report any defective PPE
  • Participation in the site Safety and Health Program
  • Minimum of two years of manufacturing experience
  • Knowledge of Six Sigma methodology
  • Ability to read, write and use basic math skills (addition, subtraction, multiplication and division)
  • Ability to communicate effectively with peers, managers and across departments
174

Quality Assurance Technician Resume Examples & Samples

  • Measures, observes and inspects process and product to ensure products meet quality requirements according to customer specifications
  • Thoroughly inspects initial product from machine start up, conducts line clearances, and communicates quality status with Shift Supervisor
  • Updates visual boards, spreadsheets, log books, and systems with verified information
  • Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag
  • Communicates with team, production staff, maintenance technicians and management staff as required
  • Makes and/or verifies labels
  • Strong mathematical ability
  • Write legibly
175

Quality Assurance Technician Resume Examples & Samples

  • Inspects, audits, and reports on components/materials using variable or attribute measuring instruments and techniques to ensure conformance with Crosstex's specifications and quality standards
  • Perform incoming material, in-process, and finished good inspections
  • Maintain data records and batch files of inspected components and materials
  • Identify, document, and report product non-conformances
  • Provide feedback to Operations through reportable metrics and daily collaborative dialogue
  • When necessary provide support to quality activities and projects for other Crosstex locations
  • Look for opportunities to improve materials, processes, and products
  • Must be a high school graduate, with minimum of 2 years’ quality assurance experience or equivalent experience within a manufacturing or medical environment
  • Must be able to read and understand product requirements. Experience with sampling techniques and safety information preferred
  • Familiarity with document control and root cause investigations is preferred
  • Understanding of audit processes and etiquette
  • Individual must be able to walk, stand, reach both above and below shoulder height, and pull, push or lift up to 50 pounds. Occasional bending, stooping, and crouching is required. This position requires frequent repetitive movement of both hands (firm or fine grasping) and good hearing, vision and color distinction
176

Operational Quality Assurance Technician Resume Examples & Samples

  • BAC graad/ 5-10 relevante ervaring
  • Begrip van de basis kwaliteitsvaardigheden
  • Kennis van documentatie controle, configuratiemanagement, verandermanagement
  • Goede kennis van de relevante ERP/SAP Systemen
  • Begrip van product- en logistieke vereisten
  • Nauwkeurig bij de eerste evaluatie en documentatie van conformiteit aan vereisten en mogelijke oorzaken
  • Talenkennis: Frans of Nederlands is noodzakelijk / Engels is een pluspunt
177

Quality Assurance Technician Resume Examples & Samples

  • Adheres to company safety policies and practices good lab procedures. Maintains the laboratory in a neat and orderly manner to assure that conditions are acceptable according to good housekeeping and safety standards. Responsible for participation in safety audits, safety meetings and proper and accurate incident investigations
  • Operating from written procedures (with the guidance of supervision), prepares samples for analysis and performs tests on raw materials, in-process materials, and finished products to establish conformity to specifications
  • Maintains complete and accurate records of all test data and results
  • Prepares and standardizes solutions in the laboratory, including stock and standard iodine and ammonia life solutions
  • Participates with and satisfactorily completes programs presented for refreshing and expanding individual abilities related to the performance of laboratory functions
  • Maintains knowledge of specifications. Responsible for understanding all changes made to analytical methods and procedures
  • Recognizes off-specification or erroneous analyses. Works to correct obviously erroneous results and reports problem conditions to other working groups, as required
  • Participates in first-aid training and provides first-aid to employees and maintains records of such treatment and reports to the plant services department
  • Responsible for knowledge of and compliance with all operating procedures, including ISO 9001 procedures
  • Responsible for proper shift relief with personnel from other shifts and crews
  • Responsible for non-supervised interface with other plant teams in a cooperative fashion, demonstrating teamwork to communicate plant quality and analytical information to assist the teams in proactively addressing quality problems
178

Quality Assurance Technician Resume Examples & Samples

  • Familiarity with production equipment, on-line inspection equipment and the ability to routinely assist production is essential
  • Satisfactorily complete all training requirements listed in the Quality Assurance Technician JQM. Comply with all standard safety practices, safety rules, GMP and all CCNA rules and policies. Report and/or correct safety issues
  • Maintain proper safety conditions of equipment and surroundings
  • Prior production / manufacturing experience preferred
179

SA Dairy Mfg-quality Assurance Technician Resume Examples & Samples

  • Team Skills: Partner is responsible for fundamental understanding of team in development and active participation within a team environment through division and plant team orientation, safety and quality training
  • Identify appropriate behaviors for situations requiring ethical decisions
  • Identify and apply Business Excellence tools at the Yellow Belt Level (e.g. QFD's, FMEA's, OPI's, and categories and types of MUDA)
  • Read and understand a quality plan and discern the appropriate tests and examinations required
  • Understand variation and apply the concepts of common vs. assignable causes of variation
  • Understand the different improvement-cycle steps in PDCA and apply them appropriately
  • Understand the value in communicating supplier expectations and the consequences of supplier performance
  • To read and interpret HACCP Plans and Quality Audit Working Papers
  • Audit Plant Processes to ensure product quality and food safety standards are in compliance with Plant standards
  • Performs and documents Plant Sanitation Audits
  • Develops basic preventive and corrective action plans for improving quality of product produced
  • 6S certification must be obtained within 6 months of start date
  • Training in Team Skills (types of teams, roles and responsibilities, team formation and group dynamics, and continuous improvement (see Body of Knowledge for ASQ Certified Quality Improvement Associate
  • Coursework or practical experience in food science, quality management, or other sciences
  • Basic knowledge of Statistics and Quality Auditing preferred
180

Quality Assurance Technician Resume Examples & Samples

  • Assures compliance with safety and quality standards throughout all operations and processes
  • Actively participates to assure cross-functional issues are resolved and plant concerns are addressed
  • Tests samples for pH, TTA, moisture %, and color
  • Places items on hold that does not meet or exceed specification from incoming material via production or 3PS, works in process, and or finished goods, including but not limited to specifications for taste, texture, weight, appearance, packaging
  • Presents reasons for retention and recommends possible solution to the issue. Be able to address hold items in a timely manner
  • Creates and maintains the documentation on supplies and materials used for production including but not limited to raw materials, packaging
  • Collects, reviews and monitors process control standards and any variances on the production floor
  • Inspects and calibrates equipment used in the lab. Reports non-compliance findings and recommends next step solutions to the QA Manager in a timely manner
  • Complies with and enforces GLPs (Good Laboratory Practices), GMP (Good Manufacturing Practices, HACCP (Hazard Analysis Critical Control Points), and other food safety and quality programs throughout the manufacturing facility
  • Informs, advises and updates company management of all quality related issues
  • Reviews, interprets, verifies, and summarize data collected from other departments. Report any deficiencies to QA Manager in a timely manner
  • Collect and analyze samples accordingly to Quality Assurance Procedures at specified frequency, ensuring results are within specified ranges and completed/recorded in a timely manner
  • Organizes and files processing records
  • Prepares samples for outside laboratory testing, evaluates, and interpret results to give to recommendations
  • Assists QA Technologist on various projects
  • Promotes safety in the work area by understanding and complying with safety procedures and reporting all accidents in a timely manner
  • Promotes our company values of "Dignity, Excellence, and Telling it like it is in a way that can be heard" through your actions and by educating the staff about our values
181

Quality Assurance Technician Resume Examples & Samples

  • Locating inventory in Stores, assessing part configuration, facilitating creation of new configuration part tag, removal and replacement of existing part tag, and ensuring inventory control system has been updated
  • Associated Degree required
  • Bachelor’s Degree preferred
182

Quality Assurance Technician Resume Examples & Samples

  • Thinking and Problem Solving Skills,
  • Customer Focus
  • Managing Change
  • Excellent Communication skills and the ability to influence others
183

Quality Assurance Technician Resume Examples & Samples

  • Add new automation tests and maintain existing automation tests
  • A graduate in Quantitative fields such as science and engineering. (0-2 years experience)
  • Good understanding of automation frameworks for both UI and API testing
  • Good in one programming launguage
184

Quality Assurance Technician Resume Examples & Samples

  • Must be a high school graduate, with minimum of 2 years quality control experience
  • Must be able to perform basic math functions, possess basic PC skills, such as using Microsoft Word, Microsoft Excel, and able to train on proprietary software
  • Works with relevant Quality staff to ensure that source documents are established and reviewed to quality system procedural requirements according to QSR-FDA part 820 and ISO13485
  • Prepares meeting agendas, attends meetings, and take notes or minutes as required
  • Perform general and administrative duties such as copying, filing, faxing, data entry, documents and information searches
  • Performs QA document control functions, including document login, tracking, processing, review, distribution and release and archiving of documents
  • Coordinates the revision, review, and approval and obsoleting of SOPs and other QSR and ISO13485 documents
  • Responsible for ensuring area managers perform annual review of all Regulatory documents and SOPs
  • Organizes and ensures accurate and reliable filing systems for all paper-based QSR and ISO13485 documents
  • Maintains in house training programs including training matrix, training files and annual review of training files
  • Maintain satellite SOP binders
  • Maintains change control and deviation processes for SOPs, master batch records, specifications, test methods, and other QSR and ISO13485 documents requiring review
  • Actively participates in internal audits, customer audits and other activities as assigned by manager
  • Compiles records and product documents for the Regulatory Manager, which are approved for use and submitted for international registration purposes
  • Monitors and maintains complaint information in Crosstex Complaint system
  • Assists in the coordination and gathering of data for the Annual Management Review
  • Provides support for execution of special quality projects to implement quality systems improvements to meet regulatory requirements
  • Tracks and follows up on open CAPA plans to closure and ensures on-time completion of action plans and effectiveness checks
  • Assists in performing actions to ensure plant FDA preparedness (i.e. coordinating with departments and identified area experts, assisting in the collection of requested documents)
  • Provide support during FDA and other regulatory body inspections and customer and internal audits
  • Assist Quality Assurance staff in generating quality metrics and reports for Management
  • Provide additional support as directed by Quality Assurance for product inspections, resource allocation and support
  • Develop and document inspection methods
185

Quality Assurance Technician Resume Examples & Samples

  • Inspect components before assembly
  • Analyze trial products during development, or test finished goods
  • Preparing inspection plans
  • Validates quality processes by establishing product specifications and quality attributes
  • Regularly perform repetitive tasks
  • Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focusJob Requirements
  • 6 months to 1 year minimum experience in a manufacturing industry or in a quality tech role
  • High school, technical school education or equivalent with Mathematics emphasis
186

Quality Assurance Technician Resume Examples & Samples

  • Good written and verbal communication skills. Fluency in reading/writing in English
  • Basic math skills
  • Basic computer literacy including Microsoft Outlook, Excel and Word
  • Previous Quality Assurance, laboratory experience
  • Previous experience in food processing or meat processing
  • Bilingual Spanish/English
  • Associates or Bachelors degree in Food Science or related field
187

Quality Assurance Technician Resume Examples & Samples

  • 1-3 years of experience as a laboratory technician in Food and Beverage or Chemical industry preferred
  • Proficient knowledge of SAP
  • Basic understanding of packaging and blending systems
  • This includes maintaining current knowledge and keeping up with new releases
  • Ability to follow written procedures accurately and repeatedly. Ability to analyze data and reach valid conclusions during troubleshooting efforts
188

Quality Assurance Technician Resume Examples & Samples

  • Decontaminates complaint returned product for further evaluation as needed
  • Examine the device history record and other source records as appropriate
  • Measure and inspect complaint product against product drawing, material, and production specifications
  • Publish Metric Trending Plans for Calibration. Assist with Corrective and Preventive Action (CAPA) resolution
  • Proficient technical writing abilities
  • Able to perform detailed dimensional and cosmetic inspection techniques on products
  • Must have demonstrated ability to use micrometers, calipers, scales and comparators
  • Knowledgeable in the area of Geometric, Dimensioning & Tolerancing (GD&T)
  • Excellent communication, organization and problem solving skills
  • Able to work with minimum supervision and under pressure
  • Computer literate: Microsoft Word, Excel and Power Point
  • Knowledge in FDA & ISO regulations are a plus
  • High school Diploma or GED required
  • Minimum of 2 years applicable experience required
  • Work experience in an ISO and/or regulated industry environment preferred
189

Software Quality Assurance Technician Resume Examples & Samples

  • Excellent written and verbal communication skills, and effective analytical and organizational skills
  • Able to accept instruction, prioritize, follow-through on work assignments with minimal supervision, and be able to work in a team environment
  • Must have working knowledge of or the ability to learn applicable state and federal laws, regulations, policies, and procedures related to this position
  • Computer proficiency with basic Microsoft Office applications is required, with experience with Microsoft Visual Studio or Team Foundation Server preferred
  • Ability to learn additional systems with minimal instruction
  • Basic understanding of standardized message formats, database setup and function, and PC hardware and networking layouts is desired
  • Experience with DNA and related products
  • Knowledge of banking systems and regulations a plus
190

Quality Assurance Technician Resume Examples & Samples

  • Work with Product & Development teams to design and implement Test Strategy to deliver quality consumer software product
  • Hands-on experience with test planning, test designing and execution, performance and stress testing, implementing and maintaining high quality test automation using existing test automation frameworks
  • Understanding of core Internet technologies
  • Experience interacting and coordinating testing amongst multiple teams
  • 2 to 5+ years industry experience testing software
  • Experience with testing in a web environment is highly desired
191

Quality Assurance Technician Resume Examples & Samples

  • Must have a Bachelor's Degree in a related field
  • Must be able to work in a wet environment. Exposure to chemicals. Exposure to nut and other allergens
  • Must be able to pass all medical exams, drug and background checks (including criminal)
192

Quality Assurance Technician Resume Examples & Samples

  • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment
  • Responsible for monitoring, inspecting, and reporting all assigned activities and finished goods to insure quality
  • Ability to submit clear, concise, and accurate reports of inspections, audits, test results, job site visits and delivered goods
  • Ability to conduct tests using a variety of tools and equipment
  • Responsible for preparing daily quality control activity summaries
  • Ability to assist in developing and implement objectives, plans and priorities to achieve quality control objectives on an annual basis
  • Communicate with Quality Manager and Engineering in the development of adequate standard drawings
  • Communicates with Quality Manager on methods and procedures in problem solving and meeting deadlines
  • Assists and periodically delivers audits
  • Responsible for studying and preparing for CWB certification and UT inspector
  • Maintains continuous improvement practices in work area
  • May be assigned additional projects or duties as designated by Team Leader
  • Must be able to work overtime hours when required
  • Must be able to pass pre-assessment criteria
  • Must be able to pass back ground and drug screening
  • AWS and CWB knowledge required
  • Must follow all safety Rules and Regulations
  • This is a night shift position
193

Quality Assurance Technician Resume Examples & Samples

  • Carry out daily Quality Assurance checks throughout the warehouse and production
  • Making up Gold Standards of finished products
  • Ensure all tests are carried out to meet finished product specifications / procedures
  • Assist in investigations relating to complaints and non-conformances
  • Carry out Product organoleptic testing as required
  • To ensure consistently high standards are developed and maintained throughout processes
  • Assist in product traceability as required, both from Ingredient forward to finished products and from finished products forward to customer and back to Ingredients
  • Carry out internal environmental audits as required
  • Lead on routine allergen testing
  • Checking of work orders for accuracy
  • Maintain true, clear, comprehensive and accurate documentation for all activities
  • On all required occasions, raise internal non-compliances and lead on investigation
  • Verify accuracy of CCPs and scales
  • Support training across departments according to quality, food safety and legality
  • Assist on environmental testing schemes in accordance to predefined schedules
  • Maintain a raw material and finished product retained sample library
  • Positive release raw materials in accordance to quality management system procedures
  • Maintain and proactive promote of hygienic practices and GMP
  • Ensure technical aspects of food production are followed in accordance to My Proteins Quality Management System
  • Ensure goods are received and finished products are positive released in accordance to Myprotein Quality Management System
  • Maintain Quality records and documentation for the purpose of traceability and customer aftercare
194

Quality Assurance Technician Resume Examples & Samples

  • Must be legally permitted to work in the United States
  • Intermediate proficiency in MS Office with emphasis on Excel
  • Root cause and problem-solving skills
  • Fork lift certified or able to be certified
195

Corpus Christi Bakery Quality Assurance Technician Resume Examples & Samples

  • Recognize and understand the different types of teams (i.e. Improvement, cross-functional, project, and self-directed) and know which type of team to use in a given situation
  • Controls non-conforming products in accordance with documented procedures
  • Maintenance of Quality Manufacturing System documentation (e.g. quality work instructions, audit records, corrective action requests)
  • Basic Math skills (+,-,*,/)
  • Bi-lingual language skills a plus
  • Demonstrated ability to solve routine problems
196

Quality Assurance Technician Resume Examples & Samples

  • Ensure that raw materials are in compliance with customer or company requirements prior to use by completing all required incoming product/packaging material inspections, per policy
  • Assure product quality and package integrity standards/specifications are met by performing required in-process quality testing at start-up, mid-run, and at product changeovers for Oil Roast, Seasoning, and all Packaging Lines
  • Moisture Analyzer
  • Salt Analyzer
  • Colorimeter
  • Ro-Tap
  • Sensory Evaluations
  • Line Check
  • Exception – Dry Roast Lines – require continuous tote/bin probes throughout the day, as notified
  • Complete timely follow-up when product quality or package integrity is found to be out of specification. (Example: Package fail follow-up)
  • Daily complete microbiological plating, reading, documentation, and labels, as required, on your shift. Pack off samples to be sent into third party lab daily
  • Complete environmental sampling, water testing, and finished product allergen testing, per policy. (AM Q.C. Tech)
  • Maintain, calibrate, and clean lab equipment, as required
  • Work to continuously improve Quality operations within the lab keeping equipment in working service and timely ordering of required supplies
  • Complete weekly internal GMP, Food Safety and Sanitation audit, per established schedule
  • Complete monthly Glass/Ceramic/Brittle Plastic Audit, per established schedule
  • Communicate lab data with operators, and supervisors if necessary
  • Communicate with production staff and maintenance staff to continuously improve quality and production
  • Assist with completion of sample requests, as requested
  • Maintain a clean and organized workstation. (Examples: Wash/Sanitize probes, sample containers, micro containers, countertops)
  • Assist operations in troubleshooting and resolving basic to moderate operating difficulties involving area equipment
  • Assist in performing investigations related to quality cases and out-of-specification products
  • Accurately prepare and maintain all quality assurance required documentation
  • Relieve other team members for absences, as required
  • Performs related work as apparent or assigned
  • Maintain the Finished Goods Retention Sample Program
  • Maintain fresh product samples for sales sample requests
  • Oversee re-work procedure/protocol. Complete resolution in Q.C. Hold Log Book
  • Oversee protocol for the allergen program, proper coding & pallet identification, Hold & Release, and truck inspection before loading
  • Train new Quality Technicians, as requested
  • Train new operators on in-process quality testing, lab equipment, procedures and documentation
  • Perform random quality audits, as time allows or as requested. (Examples: Package fails, case counts, etc.)
  • Review equipment teardowns. Complete sanitation and allergen testing, and approve production start-up, per policy
  • Review all processing records pertaining to product production
  • Responsible for the official release of all finished goods and raw materials, in the absence of the Quality Assurance Manager
  • Dependable with good attendance
  • Able to life a minimum of 50 pounds
  • Able to read, write, and accurately complete arithmetic
  • Microbiology or Food Science background, or adequate job related experience in Food Manufacturing facility
  • Computer experience to include Microsoft Office Suite
  • High School Diploma or GED required; Bachelor’s degree preferred
  • 2-5 years’ experience preferred, or any combination of experience and education
197

Quality Assurance Technician Resume Examples & Samples

  • Performs daily laboratory analyses of ingredients and finished product
  • Assure the functioning of an area of the laboratory, including but not limited to
  • Correct SOP’s are being properly followed
  • Records are complete, accurate and timely
  • Good laboratory practices are being followed
  • Chemical wastes are properly disposed
  • Laboratory is clean and organized
  • SPC, calibration and maintenance of instruments are done as required
  • Standards are prepared and handled properly
  • Retention samples are collected and handled as required
  • Results and dispositions are reported in a timely manner
  • Resolution of problems with ingredients and finished products
  • Performs analyses using wet chemical and general laboratory instrumentation (pH, titrators, analytical balances, density meters, spectrophotometer, HPLC)
  • Releases products and ingredients
  • Performs and interprets microbiological analyses on ingredients and products that are micro sensitive to ensure the quality and shelf life of products and ingredients
  • Works with production to ensure accuracy of batch composition
  • Monitors plant to ensure high sanitary standards are maintained and inspects production lines, equipment, and setup for compliance with concentrate manufacturing and quality standards
  • Trouble shoots production process problems based on analyses and data interpretation
  • Investigates and finds solutions to distressed batches and immediately communicates the situation to QA Supervisor and QA manager
  • Perform chemical analyses using instrumental or non-instrumental methods (wet chemical methods) or methods in order to determine the composition of samples
  • Identify, classify, maintain, and protect files, documentation and sensitive information consistent with record handling and retention requirements
  • Protect the Company and all Company information against unauthorized disclosure, eavesdropping and legal exposure
  • Record data from analyses or experiments in a computer, log book or laboratory notebook
  • Organize workflow and task schedules to maximize laboratory efficiency (e.g., prioritize sample analysis, assign tasks, preventative maintenance)
  • Prepare beverages and conduct analytical tests and taste or odor tests according to sensory guidelines, including qualifying taste panelists
  • Maintain laboratory equipment and instrumentation (e.g., troubleshooting, conducting preventative maintenance, calibrating and repairing)
  • Find solutions for distressed and problem batches in order to minimize losses
  • Develop, implement or maintain equipment/process inspection programs (e.g., writing protocols, conducting inspections) in labs or plants in order to identify potential health, safety or security hazards
  • Process incoming or outgoing samples (e.g., receiving, logging, labeling, shipping) using LIMS or other tools to ensure that samples are traceable and properly distributed for analysis
  • Conduct inspection of the laboratory or laboratory procedures to ensure conformance to internal (e.g., The Coca-Cola Quality System) or external certification requirements and correct or eliminate process-related non-conformance items
  • Dispose of expired retained samples and chemicals according to schedules and expiration dates in order to keep lab area clean and safe
  • Write detailed & accurate reports for analyses, experiments or projects (e.g., equipment validation, evaluation of new processes)
  • Executes non-conforming material procedures
  • Performs method implementation and improvements as needed
198

Quality Assurance Technician Resume Examples & Samples

  • Minimal relevant QA experience
  • Strong knowledge of QA methodology
  • Ability to understand technical specifications
  • Fresher or Candidates with 1 or 2 years of QA experience
199

Quality Assurance Technician Resume Examples & Samples

  • QA support for product release involving device history record and other production document review and signoff
  • Position will require some overtime and weekend work on occasional basis
  • Very detail oriented
  • Associates Degree in a Technical Field
  • Experience in the medical field
  • Previous document inspection experience
200

Quality Assurance Technician Resume Examples & Samples

  • Conduct the different electrical and mechanical tests required for the manufacturing of transformers
  • Routine tests required by the customer or the Product Engineering team
  • Tests and follow-up of prototypes in conjunction with the Engineering team
  • Some special tests
  • Control the quality of the transformers on the production line
  • Conduct the final inspection of the finished products to make sure that they meet the customers’ and ABB’s requirements
  • Perform minor repairs
  • Perform quality assurance (QA) control
  • Maintain QA control records
  • Perform administrative and technical, as per the instructions of the immediate supervisor
  • Conduct compatibility tests on raw materials, oil tests and recycled oil tests, when required
  • Collect and enter data using the information management system
  • Validate the operation of the test safety
  • Monitor quality on different work station
  • Identify, document and recommend repairs
  • Issue nonconformity reports (NCRs) related to production problems and ensure that they are solved
  • Provide quality technical support to employees
  • Participate in the integration of the quality control into the production process and ensure compliance with the established methods and procedures
  • Perform any other activity or work associated with the tasks, in accordance with the instructions of the supervisor or other person in authority
201

Quality Assurance Technician Resume Examples & Samples

  • 1st Shift
  • Reviews and verifies project documents for completeness, format and compliance with contract requirements
  • Compiles and verifies proper and accurate documentation for part prior to shipping
  • Submits project documentation on behalf of the Customer and transmits approved documents to customer
  • Audits processes to ensure compliance with appropriate procedures, practices and customer specifications
  • Reviews, evaluates and dispositions internal company documents, such as NCRs, tool orders, Bill of Materials, drawings, material testing requisitions, etc
  • Releases product(s) for shipment, representing the customer i.e. designated supplier quality representative (DSQR), quality assurance supplier representative (QASR), etc
  • Assists QEs in preparing First Article packages including Ballooning Drawings, Specifications, and using the AS9102 First Article format
  • Performs other duties, tasks and responsibilities as assigned
202

Quality Assurance Technician Resume Examples & Samples

  • Assist in the inspection of suppliers products’ according to a developed quality plan
  • Conduct site visits to outside sub-suppliers facilities to inspect product or witness inspections of product
  • Support requirements in the Engineering and Production departments on contractual QA related issues including review of specifications, preparation of required documentation and facilitation of inspection visits
  • Perform inspection and approval of new or modified existing equipment components
  • Train shop employees on Quality related practices and requirements
  • Work closely with shop to identify and solve quality related issues
  • Identify quality problem areas internally and at outside suppliers
  • Maintain Material Variance system and corrective actions as required
  • Maintain, clean and calibrate measuring instruments. Also maintain inventory and calibration records of measuring instruments
  • Must have at least five years of experience in QA methodology and testing
  • Welding and casting experience required
  • Advance blueprint reading required
  • Working knowledge of various measuring instruments and gage calibration
  • Proficient use of Outlook, WORD and Excel
203

Quality Assurance Technician Resume Examples & Samples

  • Reasonable and predictable attendance is essential
  • Evaluate and test or modified procedures used to verify that programs function according to user requirements and conform to established guidelines
  • Participate in feature development from concept to design to construction, in order to drive quality into software application as well as the culture of the company
  • Plan, design, and author effective test cases
  • Document test procedures and results to allow for continuous process improvement
  • Detail and monitor required metrics to track the progress and outcomes of the testing process
  • Identify difference between established standards and user applications and suggest any necessary modifications
  • Must have excellent communications skills (verbal and written), inter-personal savvy and be detailed oriented
  • Must have excellent time management skills, be able to multi-task, and can be looked to as an expert in his/her field
  • Must be an excellent computer user with knowledge of computer programming, have a strong interest in technology and its advancement, and be able to translate technical terms and processes into “layman’s” terms
  • Knowledge of the practical application of engineering science and technology, including applied principles, techniques, procedures, and equipment, along with design techniques, tools, and principles is essential
  • Must be able to work independently, take initiatives with projects, and be self-motivated
204

Quality Assurance Technician Resume Examples & Samples

  • Ensuring that CPS training is documented within the system and that documentation of re-training occurs as processes are modified
  • Seek guidance and bring to the attention of the QA Coordinator/QRA Manager any concerns that could potentially impact product integrity and identification or concerns that may compromise regulatory requirements within CPS
  • Two years of related experience or related medical device/pharmaceutical supply chain experience required
  • Must have the ability to become ASQ Certified Quality Auditor (CQA) within first year – Certification preferred upon hire but not required
  • Knowledge and/or experience with medical device or pharmaceutical distribution and handling practice preferred
  • Direct experience with implementation of new software applications preferred
  • Knowledge and experience with lot controlled and expiration dated product handling preferred
  • Knowledge and experience in working and advanced warehouse management system preferred
  • Working knowledge of Microsoft Office applications
  • Ability to interact with co-workers at all levels and present findings in a neutral manger, fostering continuous improvement and a collaborative environment
  • Ability to identify process flow and record deviations, potential impacts, and process improvement
  • Ability to master and maintain new application, setting up relationships and parameters for ROi use
  • Effectively practices and promotes teamwork in all duties
  • Actions are consistent with objectives and foals for the department, distribution center, and health system
  • Knowledge of procedures relative to job duties, TECSYS system, Instacount system, Lawson system, distribution center, pharmaceutical repackaging, and health system operations
  • Makes decisions based upon job knowledge and experience
  • Considers all impacted areas in decision process
  • Seeks advice where application
  • Judgment sensible and reliable
  • Completion of assignments without follow up
  • Ability to identify, adapt, and pursue priorities
  • Provides proper communication of unresolved issues in a timely manner
  • Industry-utilize available work hours effectively
  • Actively seeks others tasks upon completion
  • Observes universal precautions consistently
  • Wears proper personal protective equipment when appropriate
  • Wears clothing and badge consistent with dress code
  • Attends to personal hygiene to maintain a clean, well-groomed appearance
  • Adheres to the Health System attendance standards
  • Provides advance notification of absence where possible
205

Quality Assurance Technician Resume Examples & Samples

  • Education: High School Diploma. College or technical school training is desirable
  • Experience: Minimum of one year work experience in an industrial or laboratory environment required
  • Minimum of one year work experience in an industrial or laboratory environment required. Technical Knowledge/Critical Skills: Ability to achieve demonstration of capability for all required laboratory tests. Ability to read, write, and comprehend English
  • Work Schedule: This is a shift work position. However, the incumbent will need to be able to work any shift as directed including nights, weekends, or holidays. Periodic overtime work will be required. Work Environment: This is a plant support position. 40% non-conditioned industrial environment, 45% laboratory, 15% Office
  • Travel: None Required
  • Equipment Used: Computer, calculator, colorimeter, copier, fax, spectrophotomer, pH/ISE meter, TDS/Conductivity meter, microscope, titrator/titration kit, autoclave, incubator, water bath, heat block, laboratory balance, torque meter, light meter, noise meter, 2-way radio, Allen-Bradley Panel view controller, Ion Chromatograph, personal protective equipment
206

Quality Assurance Technician Resume Examples & Samples

  • Assists QA Coordinator in the organization of Hold Tracking (Raw Material and Finished Goods) and acts as a liaison with Rework, Warehouse, and Production Personnel
  • Attends Safety Meetings and Problem-Solving Meetings, when required
  • Conducts weekly chemical inventory
  • Additional responsibilities of this position include assisting in the creation of a culture of safety and health by performing work safely in accordance with all company safety procedures. Operates equipment safely and reports any unsafe work conditions or practice to lead/supervisor. Occupational safety and health performance is measured in this position
  • Organize and interpret results of microbiological testing of finished product and coordinate their release for shipment. Ensure that all products meet customer requirements and monitor sanitation producers
  • Evaluate and implement new technologies, equipment, and procedures for the testing and evaluation of raw materials and finished goods
  • Educate employees in regards to Quality programs. Ensure that employees comprehend and follow quality programs
207

Quality Assurance Technician Resume Examples & Samples

  • Conduct organoleptic and analytical tests at various stages of compounding and packaging to ensure compliance with standards. May include the use of pH meters, HPLC, Malvern Mastersizer, and other instrumentation
  • File and maintain retained samples
  • High school diploma or general equivalency diploma (GED)
  • 3 years of related Quality Control experience in a manufacturing environment
208

Quality Assurance Technician Resume Examples & Samples

  • Conduct routine floor audits of production and packaging areas to confirm correct product shapes, specifications, storage, packaging, labeling, and coding
  • Responsible for the identification of food safety hazards and issues. Perform necessary inspections of incoming ingredients, outgoing finished goods, or returned finished goods. Work with department managers to proactively identify and implement solutions and/or modifications to current procedures and programs to ensure the continuing safety of the finished product
  • Assist the QA supervisor with the management and execution of the Sales and Customer sample request programs
  • Measure product samples and report dies that are out of specification
  • Hold any product manufactured out of specification and communicate with all involved departments regarding disposition
  • Evaluate and record hourly tray and noodle samples
  • Assist with the supervision of the sanitation team by conducting routine sanitation audits and assigning the sanitarians duties as needed
  • Maintain and inspect shelf samples for quality purposes
  • Other duties, as assigned
  • Must have a Bachelor’s Degree in food related field. (Food Science, Chemistry, Microbiology, Biochemistry, etc.)
  • Must have experience with Microsoft Office (Outlook, Excel, Powerpoint)
  • 1+ years work experience in food plant sanitation or quality assurance
  • Physical Job Requirements
  • Must be able to sit for up to 4+ hours per day, with or without reasonable accommodation
  • Must be able to walk for up to 4+ hours per day, with or without reasonable accommodation
209

Quality Assurance Technician Resume Examples & Samples

  • Perform other miscellaneous job duties and related functions as directed by Manager or other designated person, including cross training between different valuestreams
  • 1 year of previous manufacturing experience
  • Intermediate proficiency in the use of precision measuring equipment
  • Intermediate proficiency with SAP software
  • Intermediate proficiency reading and interpreting blueprints
  • Previous experience in quality
  • Commitment to safety
210

Quality Assurance Technician Resume Examples & Samples

  • Answers and resolves customer (e.g., external and internal) inquiries regarding systems and products with Merit Medical's focus to quality compliance
  • Prepares written correspondence to address customer inquiries and/or concerns
  • Assists Quality Engineering with the identification and control of Quality Compliance risks
  • Identifies uncovered customer and/or process needs and assures needs and problems are properly communicated
  • Provides information to staff regarding customer compliance issues
  • Develops reports and compiles information for customers, departments and company management
  • Conducts research, follow-up and tracking regarding customer recommendations and concerns
  • Maintains up-to-date knowledge of company products. * Assists in the development or edit of new/revised procedures, forms, specifications
  • Updates/develops new systems and procedures to streamline business practices
  • Proactively and continuously improves internal systems and processes with a quality mindset
  • Generates Engineering Change Notifications (ECNs) to update Quality System documentation such as: procedures, forms, drawings, BOM/routers, workmanship standards, test methods, and/or inspection criteria
  • Initiates internal/external nonconformances and responsible for assuring all phases are complete
  • Evaluates internal/external nonconforming product in determining appropriate root cause, disposition and corrective action
  • Ensures containment (identification, segregation and reconciliation) of nonconforming product has been performed to prevent unintended use. May include performing inventory management transactions
  • Evaluates product placed in Quarantine/on hold to assure that it's dispositioned in a timely manner. Will determine if product/components can be transacted into/out of Quarantine based on supporting documentation provided by Engineering, and perform the transactions as applicable
  • Identifies training needs, develops training plans and performs Quality Compliance training of technicians, Quality auditors or Production employees
  • Assists Quality Engineering with the identification and control or Quality Compliance risks
  • Evaluates the manufacturing work environment to ensure it is adequately environmentally controlled and monitored, with sufficient personnel and safety production controls
  • Collects and submit information for material characterization testing such as MEM/IR
  • Researches customer inquiries into Merit's compliance to applicable standards. Generates responses to various customer inquiries
  • May assist with the supervision of technicians to include assigning work, ensuring proper completion of assignments and processes, and assisting with performance appraisals
  • Education equivalent to a High School Diploma with 7 years previous work related experience. College education preferred
  • Medical device industry knowledge strongly preferred
  • Working knowledge of quality compliance system requirements and medical device regulations
  • Understanding of regulatory initiatives preferred (i.e. REACH, RoHS, BPA, California Prop 65, Conflict Minerals, Latex, DEHP, etc
  • Excellent interpersonal, written and verbal communication skills and the ability to resolve customer requests efficiently and effectively
  • Demonstrated computer skills preferably spreadsheets, word processing, database and other applicable software programs (e.g., Oracle)
  • Good organizational skills and the ability to work under strict time constraints to meet the demands of customers
  • Ability to manage multiple projects and tasks simultaneously and to prioritize work, goals and tasks per corporate objectives
  • Ability to work independently and with cross-functional teams
211

Quality Assurance Technician Resume Examples & Samples

  • 20% - Enforce good manufacturing and hygiene practices as well as HACCP standards
  • 20% -Monitor activities related to HACCP standards
  • 20% - Conduct lifetime studies on manufactured products
  • 20% - Train employees for all that involves quality assurance
  • 20% - Respect the safety standards of the establishment
  • 3+ years experience working in food processing or dietetic technology
  • Experience in the food or regulatory field
  • Knowledge of the HACCP system/standards
  • Ability to work to work in a cool environment
  • Must be legally entitled to work for Cargill in Canada
  • Ability to write reports and improve procedures