Piping Engineer Resume Samples
4.9
(127 votes) for
Piping Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the piping engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
RF
R Friesen
Reymundo
Friesen
18617 Koepp Square
Boston
MA
+1 (555) 436 2622
18617 Koepp Square
Boston
MA
Phone
p
+1 (555) 436 2622
Experience
Experience
San Francisco, CA
Piping Engineer
San Francisco, CA
Buckridge-Abshire
San Francisco, CA
Piping Engineer
- Develop construction specifications and scope of work documentation
- Applies Global Project Methodology (Global Project Methodology) and Discipline Engineering Work Process Discipline
- Performs plant and piping design activities as a member of taskforce under guidance provided by the leader and cooperate with multi-discipline designers
- Performs plant and piping design work in the 3D integrated design systems (SP3D, CADWorx3D),
- Assist in review and quality control of mechanical engineering design work by design contractors
- Assist in the development and update of department standards and procedures
- Perform plant and piping design activities as a member of taskforce under guidance provided by the leader and cooperate with multi-discipline designers
New York, NY
Lead Piping Engineer
New York, NY
Casper-Friesen
New York, NY
Lead Piping Engineer
- Responsible for developing preliminary estimates and scope to support project/process development
- Assist in the preparation and development of project specific procedures
- Administer performance evaluations
- Approve work, timesheets or leads or other engineers
- Work with Talent Acquisition on staff hires
- Ensure adherence to industry codes and standards as well as department work instructions, specifications, and standards for assigned project
- Develop effort hour estimates and scope documents to support project definition
present
San Francisco, CA
Senior Piping Engineer
San Francisco, CA
Hartmann, Bailey and Sauer
present
San Francisco, CA
Senior Piping Engineer
present
- Personal development opportunities and possibility to work in a multicultural environment
- Perform any other duties assigned by the Piping Section Manager
- Provide monthly progress report information to the Piping Section Manager
- Assist Procurement Department in the evaluation of all claims by the supplier for increases in the engineering scope of work
- Should demonstrate engineering leadership ambitions through completion of additional training in leadership, management and/or project management
- Performs plant and piping design work across several engineering disciplines in the 3D integrated design systems (PDS, SP3D, CADWorx),
- Providing technical assistance to piping designers as well as internal and external clients
Education
Education
Bachelor’s Degree in Mechanical Engineering
Bachelor’s Degree in Mechanical Engineering
Belmont University
Bachelor’s Degree in Mechanical Engineering
Skills
Skills
- Well developed computer skills and knowledge of Word, Databases, Spreadsheets and discipline related application software
- Ability to extend theory to new and complex equipment
- Capable of designing major and complex piping configurations in critical services
- Very strong in Caesar II stress analysis software
- Performs self-quality review check for 3D modeling and piping deliverables
- Is knowledgeable of LEAN work practices and applies these principles to project delivery
- Very knowledgeable of various grades of piping and plate materials for both CS and SS
- Capable of writing narrative scopes of work
- Knowledge of industry standards and codes is advantageous
- Highly experienced in Microsoft suite of applications
15 Piping Engineer resume templates
Read our complete resume writing guides
1
Senior Piping Engineer Resume Examples & Samples
- 12 -15 years Piping Engineering experience
- Oil & Gas EPC experience
- B.E. Mechanical Engineering
- GCC work experience essential
2
Junior Piping Engineer Resume Examples & Samples
- Is knowledgeable of LEAN work practices and applies these principles to project delivery
- Perform plant and piping design activities as a member of taskforce under guidence provided by the leader and cooperate with multi-discipline designers
- Perform self-quality review check for 3D modeling and piping deliverables
3
Principal Pipeline / Piping Engineer Resume Examples & Samples
- Overview a team appointed to execute FEED and any further detailed design, as required
- Interface with the Amec Foster Wheeler Process / Flow Assurance Team
- Coordinate with and provide assistance to the task force team Engineering Manager in Al-Khobar
- Ensure that Amec Foster Wheeler and Client’s Health and Safety, Environmental and Quality Management Procedures are complied
- Ensure that work is checked (including self-check) and appropriately approved, and is completed within schedule and budget
- Be vigilant for, and advise respective Engineering Manager, of any deficiencies and possible improvements to the established Amec Foster Wheeler design methods, standards and data and of possible fields for technical investigations, developments and computer programs
- Support internal development and continuous improvement activities as required
- Undertake technical training as authorised by Discipline Manager to further career development and/ or Amec Foster Wheeler cap
- Able to work in FEED environment as well as in detailed design
- Able to assist in the development of onshore pipeline equipment installation, commissioning, operation and maintenance analysis and procedures
- Experience in the use of onshore pipeline design software
- Must be 15 to 18 years of experience, out of 5 plus years as Lead / Principal level in O & G Project, especially in Aramco GES, GES+ Contractors or Experience in GCC region Major Engineering Company
4
Piping Engineer Resume Examples & Samples
- You will be required to review, analyse and undertake any relevant calculations to ensure the Pipe supports meet the European Standards / Norms
- Present pipe supports based on SANS standards
- Must have 8 to 10 years design experience in the mining and mineral processing area in the design office and in relevant field
- Well developed computer skills and knowledge of Word, Databases, Spreadsheets and discipline related application software
- Must be technically competent in terms of core engineering theory from first principles
- Ability to extend theory to new and complex equipment
5
Piping Engineer Resume Examples & Samples
- Lead small groups for a complex task, capable to fascilitate a Root Cause Investigations
- Will have understanding of piping design related engineering tools and troubleshooting
- Thorough understanding of general applicable engineering work processes
- Will have advance knowledge of piping engineering and design
- Will have advance knowledge of piping flexibility
- Will have advance understanding of the piping design related Sadara engineering standards
- Will gain details of main supplier’s knowledge (products and its people)
- Will have advance knowledge of piping flexibility related troubleshooting and design work
- Participate in a root cause investigation as the piping design SME
- Will have better understanding of piping layout and arrangement design work
- Will gain knowledge of piping design related engineering standards
- Basic understanding of the piping design related Sadara engineering standards
- Bachelor of Science degree in Mechanical Engineering (BS) from an accredited university
- Minimum of 8 years in design experience with engineering firms or with design & site engineering offices
- Capable of designing major and complex piping configurations in critical services
- Very strong in Caesar II stress analysis software
- Very conversant in ASME B31.3 code
- Very conversant in performing pressure calculations for hot taps
- Very knowledgeable of various grades of piping and plate materials for both CS and SS
- Experienced in Micro-Station and Auto-Cad
- Knowledge of industry standards and codes is advantageous
- Highly experienced in Microsoft suite of applications
- Capable of writing narrative scopes of works
- Must be able to drive a car with valid driving license
6
Lead Piping Engineer Resume Examples & Samples
- Engineering degree qualification is essential
- Minimum of fifteen years experience is required
- Minimum of ten years gas processing / gas plant experience is required
- Experience on the US Unconventional Gas and/or shale fields would be highly beneficial
- Previous EPC / PMC experience is essential
- Ideally holding membership/s of professional institute
- Gained in-depth engineering experience in the world class process plant / or power industry, working in a project environment for a major contracting company
- Project experience of working in a variety of critical projects including grassroots, brownfield and revamp types and with proven expertise in one type/phase of industry
- Proven experience of leading large design teams for production
- Site experience on a number of design and construction based site assignments
- Have experience in handling critical piping design issues, developing layouts for complex plants and clear understanding of interdependence of piping disciplines
- Experienced and proficient in using intelligent CAD systems for various types of projects
- Previous experience in the detailed design and execution of Gas Processing Facilities, Gas Plants and GOSPs is an advantage
7
Senior Piping Engineer Resume Examples & Samples
- Apply in-depth skills and broad knowledge of the business to address complex problems and non-standards situations
- Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work produced complies with costumer objectives and procedures
- Able to use standard Piping analysis software
- Knowledgeable in SACS, STAAD and / or MOSES software
- Familiarity with PDMS, PDS, S3D and/or Tekla Structures software is a plus
8
Principal Piping Engineer Resume Examples & Samples
- Ensures that the design is safe, feasible from the points of view of fabrication, construction, installation, operation and maintenance, conforms with agreed codes and good engineering practices, meets all the requirements of the project design bases and specifications, and the work is carried out in accordance with project schedules, budgets and procedures as efficiently as possible
- Provides supervision, technical direction, control, co-ordination and execution of the engineering design and plant 3D modelling/draughting in specific discipline area, including inputs into procurement
- Plans and prepares the engineering activities within a discipline area including the man-hour budgets, work schedules, manpower loading and staffing by skill and experience to satisfy project requirements
- Assists in the co-ordination and preparation of input into the Project Documents for discipline area including design criteria, scope of work, procedures and design approach
- Liaises and coordinates with other Lead Engineers and discipline groups on the project to effect timely production of deliverables
- Liaises and co-ordinates with client engineering personnel to effect expeditious approval of the design / technical decisions / deviations
- Coordinates and prepares input from discipline area to the Project
- Reviews all key drawings, specifications, requisitions, study reports and design calculations prepared by discipline area personnel. Ensures that all documents conform to the engineering quality and completeness required on the project, and are reviewed / checked in accordance with Project Procedures
- Coordinates, reviews and expedites externally and internally prepared inter-discipline check prints, specifications and vendor information for design and maintaining technical records of such documents
- Prepares progress and status reports and material for meetings with the client, other project groups or outside companies working on the project
- Continuously monitors and evaluates the engineering progress and quality of work prepared by discipline personnel including full compliance with project procedures. Ensures that corrective action is taken where required
- Identifies and provides all documents required for Technical Audits
- Champions safety by design
- Background and experience in offshore piping and design in oil and gas industry
- 13-15 years of experience
- Sound technical skills to oversee and ensure that specifications and datasheets are completed on time for input to the technical portion of the RFQ for issue to bidders for enquiry and on receipt of quotations, to complete bid evaluation, selection of suppliers and placement of Purchase Order (PO)
- Ability to oversee a team of package engineers to effectively manage the suppliers of piping equipment packages from PO issue through to delivery to site, ensuring that the packages are completed on time, meeting the project technical, quality and HSE requirements and are operable and maintainable
- Ability to resolve problems expeditiously to minimize delays, lead a team and ensure project objectives are met by creating a conducive working environment
- Must be pro-active and possess good inter-personal skills
9
Piping Engineer Resume Examples & Samples
- Perform detailed engineering and design calculations including analysis of offshore structures (in-service / pre-service conditions)
- Provide technical direction and review of Designers producing products related to Piping Engineering
- Prepare, review, and (as Lead Engineer) approve design reports and procedures
- Provide guidance on preparing architectural general arrangements, basic schemes for fabrication and installation
- Piping Stress
- Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content and application of standards, codes and guidelines as applicable for offshore
- Preferably Registered Professional Engineer or member of professional Engineering society
10
Piping Engineer Resume Examples & Samples
- Apply knowledge and skills to complete varied assignments
- Prioritaze and organize own work to meet deadlines
- Focus on completing work within budgets
- Clearly communicate and explain information in straightforward engineering activities
- 3+ years in oil and gas with major contractor or consultant predominantly performing detail design of offshore facilities
11
Principal Piping Engineer Resume Examples & Samples
- Clearly communicate and explain difficult concepts and persuade others to adopt a point of view
- Provide technical direction and review of Designers products related to Piping Engineering
- Participate in finalizing deliverables, ensuring compliance with specifications and functional integrity
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables
- Review and (as Lead Engineer) approve pipe support locations and types
- Select by piping design for non-critical piping
- Defined by pipe stress analysis for critical piping
- Become fully familiar with P&ID, Line list, Equipment Layouts, Piping Specifications, and Design Basis
- Prepare, review, and (as Lead Engineer) approve Special Piping items List and required piping and valve specifications and datasheets
- Review P&ID with reference to Piping Material and Valve specification and mark-up Master P&ID
- Provide input for Hydrotest Flow Diagrams and Line List
- Review and (as Lead Engineer) approve third party reports such as
- Noise and Piping acoustic fatigue report
- Surge analysis report
- Flow-induced vibration analysis report
- Material selection report, etc
- Perform / Review and (as Lead Engineer) approve Piping stress Analysis and reports
- Provide critical pipe support loads to Structural Engineering Lead for structural design / verification
- Perform / Review and (as Lead Engineer) approve design calculations such as pipe wall thickness, reinforcement pad, trunnion support, external pressure, etc
- Provide pipe support requirements to Piping Design Lead
- Participate in factory Acceptance Testing of Piping Engineering items, when required
- Review Piping MTO with respect to material requisitions and Project requirement
- Participate in 3D model reviews, as necessary
- 10+ years in oil and gas with major contractor or consultant predominantly performing detail design of offshore facilities
- English Language intermediate to high level
- Familiarity with PDMS, PDS, S3D and/or CAESAR is a plus
12
Piping Engineer Resume Examples & Samples
- Learn and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work
- Define locally equipment and installation arrangement to full required detail
- Develop piping studies
- Develop 3D model for equipment and piping
- Extract and verifies isometric drawings
- Coordinate with other disciplines for relevant design interfaces
- Take part in the different MTO activities
- Develop piping studies and support definition in assigned area
- Prepares and verifies Data Sheets for itemized supports
13
Lead Site Piping Engineer Resume Examples & Samples
- Minimum 10 years relevant experience in oil and gas industry and 2 years as Lead Field Piping Engineer
- Experience with planning, coordinating and supervising major component / equipment engineering
- Possess computer knowledge in Ceasar II, 3D Review tool like Navis Works Review Reality Word and Excel
- Must possess a good knowledge of piping mechanics and understanding of of pipe work and layout design
- Familiar with Design codes and standards
14
Lead Piping Engineer Resume Examples & Samples
- Lead a team of Sr. Engineers, Engineers and Designers in the execution of the full range of engineering works for a project or projects within the Piping engineering and design discipline
- BS Eng or equivalent engineering degree from an accredited university
- Minimum 12-15 years relevant experience in a professional technical capacity involving specification, design, planning, checking in an engineering consultancy or EPC Company within the oil and gas industry
- Must have worked at least 5 years as a senior engineer, supervising and guiding a team of Piping engineers and designers working within a 3D data model environment
- Must possess a thorough knowledge of industry practices, tools, codes and standards as applicable to the Piping discipline. Tool knowledge must be hands-on, expert user level
- Must possess a good knowledge of piping mechanics and materials and demonstrate a thorough understanding of the fundamentals of pipe work and layout design through examples of past work
- Should demonstrate engineering leadership ambitions through completion of additional training in leadership, management and/or project management
- Site construction and commissioning experience is essential
- Must have ability to develop plot plans and design of all piping including critical lines
15
Piping Engineer Resume Examples & Samples
- Ensure that engineering activities on assigned projects are executed within budgeted man-hours and approved schedules, in compliance with project procedures, standards and specifications and in accordance with Amec Foster Wheeler Procedures and the requirements of the Occupational Health and Safety Act of South Africa
- Prepare requisition index for special piping items, indicating planned issue date for each requisition. Update and reissue monthly
- Prepare and check pipe stress calculations as required
- Review and approve flowsheets for correctness of depicting piping and materials
- Prepare technical bid analysis for special piping items
- B.Sc / B.Eng in Mech Engineering or equivalent
- Minimum of 10 years applicable experience
- Registered with ECSA as a professional engineer or engineering technologist. (Equivalent registration recognized by ECSA via the Washington Accord will also be acceptable)
16
Senior Piping Engineer Resume Examples & Samples
- Be part of a team of Snr. Engineers, Engineers and Designers in the execution of the full range of engineering works for a project or projects within the Piping Engineering and Design discipline
- Providing piping engineering support to the discipline lead engineer and project engineering manager on various projects in accordance with project specific deliverables and client requirements
- Acting as lead piping engineer on multi-disciplinary or single discipline projects when required
- Supervise and approve aspects of the discipline area subject matter
- Plans, schedules and control the work respect to quality, productivity and budgets
- Provide high level technical supervision, advice, guidance and judgment to the engineering team
- Assist the engineering team in the independent evaluation, selection and adaptation of engineering techniques, procedures and criteria
- Reviewing of process piping systems in the Petrochemical and Refinery industry for the relevant code compliance related to stress and mechanical integrity
- Performing pressure design calculations of piping and piping components according to the relevant design codes and standards
- Performing pipe stress calculations and flexibility analysis using Caesar II 2016 for piping systems around equipment such as heat exchangers, air coolers, rotating equipment (pumps, compressors and turbines), pressure vessels, drums and columns
- Working knowledge of ASME B31.3 piping code and its referenced codes and standards
- Detail design, layout and supporting of piping systems for new and existing plants
- Performing calculations based on Caesar II analysis results
- Performing theoretical calculations to validate Caesar II analysis results
- Reviewing of piping loads acting on nozzles of connecting equipment according to API 610, WRC 107/297 etc
- Reviewing of pipe support loads
- Reviewing of piping isometric drawings for the applicable code and client specification compliance
- Providing technical assistance to piping designers as well as internal and external clients
- Preparation of spring, nozzle load, civil support load and other miscellaneous piping equipment data sheets
- Performing quality checking and verification of calculations and analysis done by the engineering team
- Compliance with SANS 347 and the Pressure Equipment Regulations (PER)
- Liaising with other disciplines within the organization to reduce or eliminate interfacing problems during projects
- Assisting and ensuring compliance to company and client procedures and specifications
- Developing and compiling internal procedures, specification and bulletins in line with client requirements
- Developing and maintaining piping engineering calculation templates according to the relevant international codes and standards
- Compiling and checking of design and stress analysis reports
- Coaching and training of junior engineers and Sasol Engineers in Training
- Maintaining professionalism and integrity at all times
- Applying sound engineering principles in the design of process piping systems
- Keeping abreast with the latest developments and research in the piping engineering field
- Must have a good understanding of the different phases and requirements of projects i.e. Conceptual, Basic & Detail Designs mechanical and piping related
- Perform work which involve unconventional engineering practice comprising complex features such as atypical applications, conflicting design requirements, unsuitability of conventional materials and difficult coordination requirements
- Engineering decisions are not usually subject to technical review
- Manages manpower assignments and skills complements for the assigned works
- Minimum of a completed B.Eng / B.Tech (Mechanical)
- Must be in the process or eligible to register as an Engineering Professional with ECSA
- Minimum 5-10 years relevant experience in a professional technical capacity involving specification, design, planning, checking in an engineering consultancy or EPC Company within the oil and gas / petrochemical industry
- Must have worked as a senior engineer, supervising and guiding a team of piping engineers and designers working within a 3D data model environment
- LI-ML
17
Piping Engineer Resume Examples & Samples
- Should have good knowledge of manual valve and safety relief valve selection through the process specification
- Plant Construction experience in Petrochemical, Gas or Engineering & Construction companies can be helpful
- Full conversant with relevant international code & standards such as ANSI/ASME, NEMA, API standards and other local regulation
- Full conversant with piping engineering and design practices in refinery, oil & gas and petroleum industry
- Full conversant with 3D CAD SYSTEM (PDS or PDMS) and 3D Model Review System(SP Review, AVEVA Review or Autodesk NavisWorks), Full conversant with 2D CAD SYSTEM (Auto CAD or Microstation), Conversant with the requirement of ISO 9001:2008
- To be familiar with the Global engineering organization, the function of each discipline, how they interact and the function of the various support groups
18
Piping Engineer Resume Examples & Samples
- Supervises the preparation of piping isometric drawings, 2-D and 3-D plant models, plant arrangement drawings, piping detailed drawings and project specific detailed sheets using electronic tools including AutoCAD, Isogen, and Black & Veatch proprietary software packages
- Minimum 1 year of experience in piping engineering design for power, industrial or petrochemical plants
- Good knowledge of AutoCAD design procedures. Experience in using 3-D modeling design software is an advantage
19
Senior Piping Engineer Resume Examples & Samples
- BSc in Mechanical Engineering
- 10+ years of experience in Oil/Gas preferably in Piping Engineering
- Local Talent - is a prerequisite
20
Piping Engineer Resume Examples & Samples
- Perform, Check or supervise pipe stress engineering, design engineering and analysis for complex units that require finite element analysis, vibration analysis, API 579 fitness for service, high temperature applications, fatigue analysis, creep analysis and fluid flow(CFD)
- Experience with NBIC and API 570 repair and rerate procedures for piping and equipment is preferred
- Assist in the development and update of department standards and procedures
- Provide guidance/supervision to other engineers and function as a mentor to less experienced engineers
- Develop training material and conduct technical seminars in area of expertise
- Act as liaison with the other departments; specifically Piping Design, Mechanical, Structural, Control Systems, Process Engineering and Construction
- 25+ years of total experience required
- 15+ years of oil & gas and chemical industry experience required with a heavy emphasis on piping
- Proficient in Finite Element Analysis principles and software, such as, ANSYSnsys, AUTODESK (ALGOR), AUTODESK, and FEPipeMATHCAD
- Advanced MS Office skills (Word, Excel, PowerPoint) and Mathcad
- Good understanding of project execution for capital projects
- Must have practical knowledge of ASME B31.3 Process Piping Code, ASME Section VIII, Division 1, 2, and 3, API design standards covering API 610, API 661, API 617, API 618, API 560, etc
21
Piping Engineer Resume Examples & Samples
- Should know about basics of interdepartmental relationships , procurement alignment & field
- Experience Level: 10-15 yrs
- Previous experience of working with any engineering company will be beneficial
22
Piping Engineer Resume Examples & Samples
- Adhere to and promote the Hatch corporate safety culture and comply with the requirements of Vale’s safety management system
- Assist in ensuring that mechanical/piping engineering discipline work complies with relevant sections of mandatory health and safety standards, in particular relating to pressure piping regulations or codes, and with due consideration of relevant client engineering standards
- Prepare design calculations and documentation including hydraulic modelling, stress analysis, equipment sizing and tank, pressure vessel and bin design, including the use of applicable computer software packages
- Stamp documents and drawings for which the engineer is responsible where required
- Prepare technical specifications and data sheets in consultation with other disciplines
- Contribute to resolving mechanical/piping issues during the project lifecycle (planning, design, procurement, fabrication, construction, commissioning, operations and maintenance) and prepare and contribute to technical memos and reports
- Prepare and/or provide input to both 3D models and 2D mechanical drawings
- Participate in and contribute to design reviews and HAZOPs
- Assist in defining scopes, preparing engineering services estimates and proposals
- Manage and control multiple small engineering tasks within budget and schedule
- BSc/BEng in mechanical engineering from an accredited University
- Registered engineer with the Professional Engineers and Geoscientists of Newfoundland and Labrador (PEGNL)
- Strong client focus and ability to interact well with operations and maintenance personnel coupled with good communication and interpersonal skills
- Good knowledge of mechanical and piping codes and standards especially ASME, ANSI, API, ASTM, AWWA and NFPA
- Good technical knowledge of mechanical/piping engineering including specifications, calculations, P&ID development, sizing, material selection, operability and maintainability aspects and procurement requirements for mechanical and piping equipment
- Familiarity with the requirements and application of pipe stress analysis
- Ability to plan and organize work, and achieve quality and schedule objectives
- Good understanding of systems and workflows relating to the mechanical/piping discipline combined with the ability to function as a member of a multidiscipline team and coordinate between disciplines for mechanical/piping activities
- Ability to navigate and interrogate 3D design models
23
Piping Engineer Resume Examples & Samples
- Supervises the preparation of piping isometric drawings, 2-D and 3-D plant models, plant arrangement drawings, piping detailed drawings and project specific detailed sheets using electronic tools including Microstation/Bentley, Isogen, and Black & Veatch proprietary software packages
- Minimum 3 year of experience in piping engineering design for power, industrial or petrochemical plants
- Good knowledge of Microstation/Bentley design procedures. Experience in using 3-D modeling design software is an advantage
24
Piping Engineer Resume Examples & Samples
- Assist in the piping engineering activities on a project under the supervision of a senior level piping designer or a piping engineer; engineering activities include: stress analysis, construction specifications, material procurement specifications, and calculations
- Journey level; has comprehensive understand of principles, theories, concepts, and industry practices and standards and their application
- May provide some technical guidance to less experienced design and engineering personnel
- Directs activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and customer requirements
- 4-7 years of related experience required
- Proficiency with Microsoft Applications is required
- Ability to work independently and complete tasks as scheduled is required
- EIT certificate required
- CAD design software experience (preferably AutoCAD and/or Microstation) required
- Smart Plant 3D
- Internship or co-op experience with an EPCM or A&E firm preferred
25
Lead Piping Engineer Resume Examples & Samples
- Degree qualified in Mechanical Engineering, or a similar related subject
- Chartered engineer preferred
- Minimum of 15 - 20 years preferred
- Demonstrate a wealth of relevant experience in brownfield oil and gas and or petrochemical industry
- Experience must include Detail Engineering of similar installations as Lead Engineer
- Proven ability to engage in effective dealings with client
- Ability to manage team and workload with conflicting requirements
26
Lead Piping Engineer Resume Examples & Samples
- Lead Engineer responsible for managing the piping engineering activities and deliverables associated with larger capital EPC projects in excess of 1 billion dollars
- Responsible for developing preliminary estimates and scope to support project/process development
- Develop effort hour estimates and scope documents to support project definition
- Participate in developing overall EPC schedule for piping engineering as well as assessing the progress of the piping engineering effort and managing the budget
- Responsible for managing piping tag quantities and bulk material
- Coordinate the review of vendor drawings and data used for oil, gas, and petrochemical processing facilities. Must be able to communicate detailed design issues effectively with suppliers, clients, and other engineering disciplines
- Coordinate and cooperate with discipline lead engineers to ensure the smooth flow of all information on the project task force, and to ensure alignment with project requirements
- Consults with Department Manager and Subject Matter Experts on technical problems, staffing requirements, and schedule issues relating to project commitments for deliverables
- Monitor progress and performance of personnel on project team to assure quality and consistency for all deliverables
- Demonstrates customer focus in all actions
- Ensure adherence to industry codes and standards as well as department work instructions, specifications, and standards for assigned project
- Continually assists with monitoring project staffing requirements to align with project needs
- Facilitates weekly project team update meeting
- Serve as Supervising Engineer, providing guidance/supervision to other engineers and function as mentor to less experienced engineers
- Participate in 3D Model reviews
- Interface directly with Work-share ‘offshore’ offices to ensure piping engineering scope is fully conveyed, and to ensure quality/consistency for all deliverables
- Must assist in the development and update of discipline standards and procedures
- Bachelor’s degree in Engineering or Design preferred with 15 to 25 years of experience in the EPC industry supporting oil, gas and petrochemical processing facilities
- Must have proven leadership experience associated on large-cap lump sum projects
- Must have experience in the following areas: piping speciations to support the model, piping flexibility stress analysis, line list support, SP Item support, piping material take-offs of piping bulks and tagged items
- Demonstrates a broad technical knowledge of engineering
- PE registration desired
- Must have knowledge of ASME B31.3 Process Piping Code, API design standards
- Individual Leadership / Influencing
- Value Plus Engineering (Cost awareness)
27
Piping Engineer Resume Examples & Samples
- Field data gathering
- Arrangement and layout of equipment and the design of the interconnecting piping systems
- Perform static and dynamic stress analysis and reports on critical
- Preparation of support standards and data sheets for spring hangers and engineered supports
- Preparation of structural loading information and review of isometrics for pipe support requirements
- Generate/review piping specifications and obtain vendor quotation - provide input for vendor equipment coordination for piping
- Provide material take-off and costs to project estimators
- Develop construction specifications and scope of work documentation
- Perform field verification activities since many projects are a retrofit nature
- Provide final checking, approval and stamping of all design deliverables associated with piping
- Support construction, commissioning and start-up activities
- Ability and flexibility to lead engineers and manage small scopes of work as well as perform design engineering deliverables dependent on project scope
- Adaptable to accommodate flexible working arrangement whilst portfolio of projects develop and mature
- Knowledge of project management techniques and fundamentals especially relating to engineering deliverables management
28
Construction Field Piping Engineer Resume Examples & Samples
- Report to Lead Project Engineer
- Develop Weekly work plan in conjunction with area superintendent and piping GF and planning department
- Capture daily progress
- Develop piping erection sequence in each area
- Create pre and post pressure test punch list
- Review technical documentation and procedure and feed back to area superintendent
- Review Construction work pack and piping isometrics
- Review and request material status
- Create daily work report
- Expert technical knowledge in construction aspects of a specific engineering discipline
- Advanced knowledge of construction discipline best practices and emerging trends
- 5+ years of experience as a Construction Management or related field or relevant experience Preferred
- Bachelor’s degree or relevant experience will be considered
- Technical background with experience around piping installations
- Familiar with piping isometrics, pipe systems and P&ID's
- Previous experience with pipe testing and test packs is desired but not necessary
- Experience with pipe system testing and system turnovers
- Experience and understanding of coating materials, application processes and painting/sandblasting ITP's
- Developing work packs, interfacing with piping, priority sequencing, scheduling of pipe and equipment insulation, fireproofing and painting
29
Principal Piping Engineer Resume Examples & Samples
- Responsible for the design and approval of all piping work on assigned projects, preparation and approval of project related standards and job notes
- Ensure that engineering activities on assigned projects are executed within budgeted manhours and approved schedules in compliance with project procedures, standards and specifications and in accordance with Amec Foster Wheeler procedures and the requirements of the local Occupational Health and Safety Act
- Prepare requisition index for special piping items, indicating planned issue date for each requisition, update and reissue monthly. Prepare and approve project specific standards and job notes
- Check piping drawing index for piping work including preparation of pipe stress index
- Design, prepare and approve general notes requisitions for piping work and special piping items
- Check and approve piping bulk requisitions and technical evaluations from MTO
- Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Supplier’s Document Index and expediting of supplier documents
- Review and approve supplier documents for piping, distribute and conjunction with Procurement Department all claims by supplier for an increase in the engineering scope of work
- Give guidance to client, project engineers, other specialist engineers and inspectors on piping engineering matters. Review piping aspects of package unit supplier’s drawings as requested by the engineer responsible for the equipment
- Ensure that piping engineering operations are complete in accordance with the approved project schedule and within allocated manhours
- Advise the Chief Piping Engineer and Engineering Manager of any slippages and their causes and proposed corrective action, any technical problems and unresolved differences with other groups
- Co-ordinate with Procurement Department and ensure certified drawings are available in time to meet the engineering schedules
- Notify the Project Engineer or all deficiencies in the flow of data or other basic information required for execution of work
- Provide progress report information, at the required frequency and with the required content, to the Project Engineer
- Provide information where necessary to estimating the cost of contract changes, alert the Project Engineer / Project Manager to circumstances considered to be subject to contract change
- Follow up piping construction work on project sites to ensure correct interpretation of designs regarding installation. Resolve any piping problems arising during commissioning
- BSc (Mechanical / Piping Engineering) / B.Eng (Mechanical / Piping Engineering)
- Pr. Eng or Chartered Eng
30
Piping Engineer Resume Examples & Samples
- Resolves specialty related engineering issues by applying accepted principles, codes, and standards
- Perform Piping Stress Analysis, assuring compliance with all applicable codes pertaining to piping systems and strain sensitive equipment
- Ensure coordination with other in-house departments
- Perform wall thickness and branch reinforcing calculations
- Prepare requisitions, technical bid evaluations, and supplier document review for Spring Supports and Expansion Joints
- Perform thorough review of relevant vendor information
- Provide a timely internal check of drawings produced by other disciplines
- Produce required project reporting for Piping Engineering Assist in preparing man hour estimates for all Piping Engineering activities requirements
- Understand the project scope of work, budget and schedule, particularly as it applies to Piping Engineering and Design Experience in the oil/gas, hydrocarbon, refinery, offshore, or infrastructure industries
- Recognize as specialist in piping engineering field on large to mega projects
- Must have 10 Years Piping Engineering or related industry experience
- BS in Mechanical Engineering or equivalent experience
- Professional Registration Experience in the oil / gas, hydrocarbon, refinery, offshore, or infrastructure industries and is recognized as a specialist in a specific engineering field on large to mega projects
- Knowledge of engineering practices and economic principles, calculation methods, design details, international codes and standards, procedures, and specifications
- Experience in field visits to refineries, chemical plants, petro-chemical plants, etc
- Experience in field assignments, potential visits to Offshore sites, lifting and carrying things offshore, inspection trips, leadership experience
- Proven track of good leadership skill
- Working knowledge of applicable codes and standards (ASME, ASTM, ANSI, API, NEMA, etc.)
- Must be proficient with Caesar II, Microsoftq Excel and Word. Proficiency with AutoCad, FE Pipe, and NozzlePro
31
Senior Piping Engineer Resume Examples & Samples
- Bachelors Degree in Mechanical / Piping Engineering with at least 10 years’ experience
- Thorough knowledge of Equipment layout Development, Piping layout design for all types of equipment such as Vessels, Exchangers, Tanks, Pumps, Compressors and Piping MTO
- Familiar and hands on experience with design and drafting tools like 3D PDS / PDMS, Microstation, Autocad and I sketch
32
Piping Engineer Resume Examples & Samples
- Bachelor of Science or equivalent degree in Mechanical Engineering from an accredited university
- Minimum fifteen years relevant experience in the oil / gas industry
- Must have experience in Wellhead Towers
- Preferably ADMA OPCO project experience
33
Lead / Principal Piping Engineer Resume Examples & Samples
- Detailed knowledge of Piping Design and Plant Layout aspects
- Proven understanding of Pipe Specification
- Proven skill at support selection
- Capable of pipe routing of all major process and utility piping in accordance with P&ID's and project standards, including specific service conditions and impact on piping design
- Shall be capable of reviewing SPS details; checking/correcting basic deliverables; preparation of Plot Plans in accordance with Project requirements and standards for checking by Layout Engineer
- Capable of representing the project to the Client
- Possess management skills and the ability to deliver projects
- Issue clear directions on targets, communicate concisely and develop the piping team on projects
- Maintain a strong work ethic and understand team dynamics and adjust behaviour to gain maximum advantage
- Understand how to motivate and control designers and engineers to produce quality work on target and to budget
- Understand workshare elements and how to divide work-scopes
- Must be Degree qualified in Mechanical Engineering, or a similar related subject
- Demonstrate a wealth of relevant experience in petrochemical or similar related industry
- Experience must include Detail Engineering of similar installations and be of lead specification engineer calibre with strong communication skills
- Ability to deal with resolution of technical and contractual issues and policing of the design to ensure compliance with project requirements
- Proven strong character and self-motivated individual
- Proven ability to engage in effective dealings with both client / owner and detail design contractors
- Must be able to work with the minimum of supervision and be technically strong
34
Senior Piping Engineer Resume Examples & Samples
- For the design and approval of all piping on assigned projects
- Review and approve project schedules with the Project Engineer to see that all dates, rates of progress and design periods are realistic
- Review and approve all piping drawings and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard
- Review and approve supplier documents for piping and distribute
- Assist Procurement Department in the evaluation of all claims by the supplier for increases in the engineering scope of work
- Ensure that piping engineering operations are complete in accordance with the pproved project schedule and within allocated manhours
- Advise the Chief Piping Engineer of any slippages and their causes and proposed corrective action
- Notify the Project Engineer of all deficiencies in the flow of data or other basic information required for execution of work
- Provide information where necessary for estimating the cost of contract changes. Alert the Chief Piping Engineer to circumstances considered to be subject to contract change
- Follow up piping construction work on projects sites to ensure correct interpretation of designs regarding installation. Resolve any piping problems arising during commissioning
- Keep abreast of developments in the piping engineering field
- Assist where necessary in the compilation of operating manuals and mechanical catalogues
- Qualified to degree level with 10 years of relevant experience or equivalent
35
Senior Piping Engineer Resume Examples & Samples
- Reporting to the Piping Discipline Head, the main functions of the role will be to execute designing and drafting activities
- Executing the assigned design and drafting activities following the instructions given by the Area Piping Engineer in accordance with the quality system in force within the Discipline, job requirements, and time schedule
- Developing Plot plan and Equipment layouts under the supervision and following the instructions of Area Piping Engineer according to the established Technical Work Practices
- Developing 2D Piping General Arrangement Drawings under the supervision and following the instructions of Area Piping Engineer according to the established Technical Work Practices
- Developing 3D model based on the study layouts under the supervision and following the instructions of Area Piping Engineer according to the established Technical Work Practices
- Prepare Isometric sketches for all Stress critical lines with the possible support locations and assist the stress engineer to carry out stress analysis
- Assist, Remodel and Update the model based on the Internal, Client reviews, latest Supplier information and Isometric checking comments and maintain the clash free model
- Thorough knowledge of Equipment layout Development, Piping layout design
36
Lead Piping Engineer Resume Examples & Samples
- Ensure that all work designed or supplied by the Piping engineering discipline complies with the relevant sections of mandatory health and safety standards, including any pressure piping regulation or code referred to within the required jurisdiction for the Project with due consideration of relevant client engineering standards
- Develop a thorough understanding of the project requirements as they relate to scope, execution strategy, cost and schedule with the Engineering Manager
- Prepare a list of engineering deliverables and time based functions to facilitate the planning and control of the engineering budget
- Develop the Piping work plan for insertion into the Project specific execution plan and develop and maintain the Project’s scope of work documentation and revise as required during the design evolution
- Manage and review the Piping engineering work packages associated with all deliverables and time based functions to ensure that budgets and schedules are being met, and take corrective action if necessary
- Review and approve Piping technical deliverables
- Assist in the preparation and development of project specific procedures
- Manage Piping system requirements to achieve the Project results and monitor effectiveness
- Represent the Piping practice in project engineering co-ordination meetings
- Ensure co-ordination, between the Piping team and other disciplines of all activities being performed as the design evolves
- Ensure that quality audits of engineering work are carried out in accordance with Project procedures and the quality assurance plan and maintain technical documentation
- Participate in the selection of Project piping candidates
- Participate in HAZOP reviews
- Ensure resolution of Piping issues during Project lifecycle, including planning phase, design, procurement, fabrication, construction and commissioning
- Promote and maintain the application of ethical and professional practices in the execution of Piping engineering work
- Adhere to and promote the Hatch corporate safety culture
- Qualifications and Experience
37
Senior Piping Engineer Resume Examples & Samples
- Undertake & check calculations
- Perform all reasonable job tasks required by line manager
- Represent Genesis at meetings
- Contribute towards bids and tenders
38
Lead Piping Engineer Resume Examples & Samples
- Minimum of 15 - 20 years of experience preferred
- Proven ability to work in team
- Good Italian
39
Senior Piping Engineer Resume Examples & Samples
- Maintain required technical quality of work
- Identify scope and schedule changes in accordance with the Change Control Process
- Ensure, as far as practically possible, that all assigned work is carried out in compliance with the agreed budget and schedule
- Review, prepare, check and/or approve work output of discipline assigned personnel
- Prepare estimates and schedules and assist in their review
- Bachelors Degree or equivalent in appropriate engineering subject
- Experienced engineer with sound technical background and expertise
- Competent in design safety/environmental requirements, procedures and responsibilities for both self and subordinates
40
Piping Engineer Resume Examples & Samples
- Review of customer specifications in offer phase, especially regarding piping, valves, constructability, function ability and costs
- Execution of Piping scope for power plant projects
- Preparation of technical specifications and inquiry documentation
- Tracking of Project targets (milestones, hours) and conducting of design reviews and coordination work
- Coordination and optimization of interfaces (mechanical, electrical, I&C, layout, civil)
- Review of contractors engineering manufacturing- and quality documentation
- Supervision of contractors time schedules and costs
- Coordination of the preparation of customer documentation
- Coordination of contractors with project and site requirements
- Claim Management and negotiation
- Proposal estimation piping scope
41
Lead Piping Engineer Resume Examples & Samples
- Detailed engineering of systems and packages
- Piping layout design, piping specifications, stress and supports engineering
- Experience with PDMS, Smartplant, Caesar II, 3D-model reviews
- Detailed engineering execution and field installation or operations or commissioning experience or vendor
- Technical document reviews
- Discipline approvals, Review of contractor piping and layout design
- BE / B.Tech Mechanical is Mandatory
- Lead Piping engineer responsible for all applicable technical document reviews, discipline approvals and Contractor overview for Piping and layout design
42
Piping Engineer Resume Examples & Samples
- Conversant with ASME B31 Code for Pressure Piping and other standards referred therein, ASME / API Standards, NACE and other international codes & standards
- Piping Stress Analysis software (CAESAR-II Latest version) Static and Dynamic modules
- Pipe support Engineering
- Material selection and applications for different services
- Preparation of Piping Material Specifications, technical specifications, data sheets, scope of work, Design Basis etc. as necessary for placement of orders for EPIC contractors
- Preparation of Material Requisitions, Technical bid Evaluation/Tabulation, MTO review
- Preparation of Piping design basis, Feasibility study & FEED report, FEED verification report, Construction scope of work
- Review of Plot plans, Equipment Layouts, Piping Layouts, Isometrics, Vessel Trim drawings, Vessel Clip drawings, Valve Schedule, Tie-in Schedule, Pipe support drawings, Piping & Pipe supports MTO
- Onshore / Offshore Site survey and preparation of Site Survey Reports
- Good knowledge in design reviews of Piping drawings / documents / calculations submitted by Vendors / contractors
- Proven experience in Offshore Greenfield & Brownfield projects is must
- Exposure to PDS, PDMS, SP3D, SPR
43
Piping Engineer Resume Examples & Samples
- Assist Head of Engineering in supervising engineering activities monitoring quality, performance and conformance to design requirements in mechanical/piping/mechanical equipment field
- Assist in review and quality control of mechanical engineering design work by design contractors
- Good understanding of local and international design methods, and an ability to compare both
- Generate mechanical design packages and integrate these with those of other disciplines in the preparation of technical tender documentation
- Supervision/inspection and quality control mechanical equipment being carried out in local workshops and yards
- Provide interpretations of specific parts of local codes and standards
- Provide expertise for mechanical engineering technical advice and problem solving
- Give daily input to Head of Engineering daily report on engineering activities
- Ensure that all elements in mechanical engineering works comply with safety, permitting and company procedures and specifications
- Closely follow engineering contractor to ensure deliveries are to the highest technical standard and agreed scope
- Report any deviations to the scope of work, both technically and schedule, suggest corrective actions when and where required
- Coordinate Engineering activities in compliance to company and local standards
- Monitoring contractor performance assuring the application of all the relevant HSEQ and QA procedures is adhered to
- Optimizing engineering and construction works from safety, economics, quality and schedule points of view
- Selection of the best technical and economical Mechanical Construction solutions on company facilities
- Quality and consistency of mechanical project (package) according to project plan
- Assuring the application to project of all the relevant norms, local rules, company standards and international best practices on accident prevention and human protection, environmental impact reduction and energy efficiency
44
Lead Piping Engineer Resume Examples & Samples
- Nuclear experience in a Lead Piping Engineer role
- Minimum 15 years piping experience
- Detailed knowledge of Piping Design and Plant Layout
- Proven understanding of Pipe Specifications
- Experience of leading piping teams containing engineers, designers and pipe stress analysts
- Control of schedule and manhour budgets
- Liaison with technical specialists within the JV parent companies
- A working knowledge of SL standards and procedures
- Knowledge of PDMS / Navisworks
- Knowledge of CAESAR 2 software
- HNC minimum
- Navisworks,
- Sharepoint, General Microsoft office package
45
Senior Piping Engineer Resume Examples & Samples
- A Mechanical Engineer (either chartered or actively working towards chartership),
- Educated to bachelor level or above in Mechanical Engineering or similar subject,
- Knowledge of a range of 2D and 3D design packages and applicable codes and standards,
- Demonstrable experience in an applicable industrial sector,
- A working knowledge of relevant laws, regulations, processes and procedures
- A full driving licence and a willingness to travel will be required for the role
46
Lead Piping Engineer Resume Examples & Samples
- Accomplishes results through engineering employees within one discipline
- Work is reviewed in terms of meeting the organization's objectives and schedules
- Frequent contacts with equivalent level managers concerning projects, operational decisions or scheduling requirements
- Administer performance evaluations
- Approve work, timesheets or leads or other engineers
- Attend meetings with executive leadership team
- Conduct and lead meetings with clients and subcontractors
- Lead meetings with engineers in the piping engineering department
- Work with Talent Acquisition on staff hires
- PE registration is required
- Experience with Ceasar II, Nozzle Pro and/or FE Pipe is required
47
Piping Engineer Resume Examples & Samples
- Develop conceptual layouts and cost studies
- Check calculations made by other engineers
- Assist the drafting group in resolving routine layout and detailing problems monitor drawings in progress, working with the Piping Team Leader to ensure piping conformance with the design calculations
- Assume the full responsibility for the line list and subcontract pricing items
- 7+ years of experience in engineering performing design and analysis for less complex units under general supervision required
48
Senior Piping Engineer Resume Examples & Samples
- Drive innovative solutions to reduce cost and schedule
- Participate in relevant meetings, such as HAZID, Design Reviews, Model Review and PEER Reviews
- Be fully conversant with Process safety and ensure its implementation within the Piping design
- Support the Lead Piping Engineer supervising younger engineers and graduates
- Relevant degree or equivalent in Mechanical Engineering
- 10 years’ experience of which 7 years must be related to the offshore oil and gas industry
- Familiar with layout design and stressing pipework
49
Piping Engineer Resume Examples & Samples
- Execute all piping engineering activities
- Participate in relevant meetings, HAZID, design reviews, model review, PEER reviews, etc
- Be fully conversant with process safety and ensure its implementation within the piping design
- Relevant degree or equivalent in mechanical engineering
- Have experience in using PDMS and CAESER II
50
Lead Piping Engineer Resume Examples & Samples
- Execute all Piping Engineering activities
- Participate in relevant meetings, HAZID, Design Reviews, Model Reviews, PEER Reviews, etc
- Supervise the Piping team
- Monitor and report resource requirements
51
Junior Piping Engineer Resume Examples & Samples
- Prepare engineering calculations such as hydraulic modeling, stress analysis, equipment sizing and tank, pressure vessel and bin design and ensuring that all analyses satisfy user and system requirements
- Prepare technical specifications based on input received from other disciplines
- Prepare data sheets based on input received from other disciplines
- Prepare or provide input to 3D models and 2D mechanical drawings
- Assist in the commissioning of systems on site as required
- A recent or soon to be graduate with a Bachelor of Science degree in Mechanical Engineering
- Completed Engineer In Training (EIT) professional registration
- Ability to apply technical knowledge to various practical problems
- A desire to learn and continually develop
52
Piping Engineer Junior Resume Examples & Samples
- Reports to the Principal piping designer of assigned area and to Support Lead Engineer
- Learns and handles with all applicable job specs, piping classes, standards and working instructions that may be needed for the correct development of his assigned work
- Coordinates and assures transmission to Civil Dept of sketches and significant design loads for structures, buildings and special supports, on time
- Prepares and manages the data sheets position for piping support clips, according to stress criteria and support rules.Coordinates and assures transmission to Mechanical Dept of position, shape and design load of piping support clips
- Verifies, comments and follows-up piping studies and drawings, for correct inclusion of stress and civil requirements on supports
- Coordinates and assures correct support design of lines, identifying on time those special supports that have to be transmitted to civil department. Updates interface special support list
- Prior experience is not necessary
- Fluent in English and / or Spanish
- Available to work for 1.5 - 2 years in Barcelona
53
Piping Engineer Resume Examples & Samples
- Provide general engineering support related to piping engineering i.e plot plan, equipment layout design, piping route design, pipe support design, etc. covering conceptual design, front-end engineering through to detailed engineering design
- Generate and review piping material specifications, specialty items, valve specifications and material take-off to support procurement
- Perform piping calculation, pipe stress analysis and vibration analysis to support both engineering design and troubleshooting, provide the practical solutions to prevent reoccurrence incident
- Provide piping technical, analysis and recommendation for supporting failure analysis, root cause analysis and other health, environment and safety issues as requested by supervisor Utilize piping engineering technical to response piping technical query i.e. material review, material evaluation and procurement
- Develop construction work package to instruct construction/fabrication team on fabrication and installation scope
- Closely working with construction team for fabrication, transportation, installation, hook-up, commissioning until turn into operations Function as a Project Manager to manage small size project as assigned by supervisor. (scheduling, economics evaluation, Approval for Expenditure (AFE) development, material management, project cost/schedule controls)
- Bachelor in Engineering (Mechanical or others) More than 10-year experience in piping engineering
- Good knowledge in piping engineering codes and standard for offshore operations ( ASME, API, etc. ), able to perform piping calculation and apply fundamental of piping engineering
- Able to use engineering software to support design i.e. Caesar II, pipe stress calculation and 3D model software General PC skills ( MS, etc. )
- Willingness to travel to locations inside and outside the business unit for job related activities and personal development/training
54
Piping Engineer Resume Examples & Samples
- Provide technical support to Long Harbour Operations, as well as external engineering consultants through quality reviews of their engineering deliverables
- Provide technical support to construction contractors in the piping discipline and assess the quality of their work in the field
- Responsible for translating operational needs into detailed design requirements
- Assist in the review, resolution and response to Engineering Request for Information
- Coordination for the accurate preparation of engineering design deliverables such as drawings, specifications and scopes of work
- Support the development of project budgets and schedules by providing technical knowledge and developing material take-offs based on engineering deliverables
- Perform piping specific design deliverables: update and create isometrics, create specialty datasheets, installation details, selection of equipment and materials, provide input to P&ID’s and evaluation of alternatives. Identify and report changes to project scope
- Coordinate and collaborate with multi-disciplinary team
- Demonstrate flexibility by taking on multifunctional roles that include engineering or project management assignments, team administration duties and championing specific assignments, as applicable. These roles will be addressed, as appropriate, at an operating, maintaining and continuous improvement level
- Support the Safe Production model of risk and hazard management and lead by example
- Experience in the piping & mechanical disciplines
- Experience working in a heavy industrial operating plant, preferably in the mining industry
- Minimum of 3-5 years’ experience, preferably in a complex industrial setting
- Familiarity with Engineering codes and standards
- Excellent interpersonal & communication skills
- Knowledge of FRP and Lined Pipe is an asset
55
Lead / Senior Piping Engineer Resume Examples & Samples
- Must have Engineering Professional registration (ECSA)
- Minimum 8-10 years relevant experience in a professional technical capacity involving specification, design, planning, checking in an engineering consultancy or EPC Company within the oil and gas / petrochemical industry
- Must have worked at least 5 years as a senior engineer, supervising and guiding a team of piping engineers and designers working within a 3D data model environment
- Must possess a thorough knowledge of industry practices, tools, codes and standards as applicable to the piping discipline. Tool knowledge must be hands-on, expert user level
- Lead a team of Sr. Engineers, Engineers and Designers in the execution of the full range of engineering works for a project or projects within the Piping Engineering and Design discipline
56
Lead Piping Engineer Resume Examples & Samples
- Piping Material Take-off and carryout all procurement activities
- Driving the Model Reviews with project team and client using review tools
- Motivate, coach and guide the team for project success
- Carryout all project closure activities and support construction team
- A Master degree in mechanical engineering
- Excellent plant design and piping layout concepts
- Knowledge in Piping stress and supports
- 3D modeling skills using tools like SP3D
- Good at usage of MS Office tools
57
Senior / Principal Piping Engineer Resume Examples & Samples
- Piping design
- Piping engineering (Technical specification, requisition, pipe stress, pipe support)
- Piping fabrication, installation, testing
- Good understanding of piping design codes (US and European)
- Installation support
58
Piping Engineer Resume Examples & Samples
- A minimum of 8 - 10 Years’ experience in the Oil and Gas Industry
- Capable of handling a heavy workload and performing effectively and efficiently under pressure
- Experienced in undertaking MTO activities at all project stages (i.e. Concept, Feed and EPC phases of projects)
- Experienced in the use of AMUSE Material Analysis system
- Familiar with working on both Greenfield and Brownfield Projects
- Strong computer skills with a working knowledge of Micro station, AutoCAD, PDS, PDMS, Smartplant3D, Smartplant Review and Navisworks
- Thorough understanding of Major International Standards related to the Piping Discipline (ANSI / ASMEB31.3 / B31.4 etc.)
59
Piping Engineer Resume Examples & Samples
- Lead and execute piping basic designs and detail engineering for multiple small and intermediate site projects, and / or contribute to larger projects in front-end loading and detail design
- Verify and complete project scope for your specific area of expertise
- Lead and check designers
- Coordinate (Plan and follow up) with piping stress engineers and piping material engineers (piping calculations and equipment selection) in your area
- Follow up of technical interfaces with the other design disciplines like E&I, civil, pressure vessels and mechanical
- Communicate progress of your projects with the project engineer (also with production, construction and contractors)
- Prepare scopes for external Engineering Companies or Remote DOW Engineering Centre (work share)
- Site interface for work shared design and engineering activities
- Design according to Dow, national and international codes and regulations
- Ensure that environmental, safety and loss prevention principles are used
- Support process engineering and maintenance activities
- Master Degree in Engineering (for instance Mechanical engineering), additional piping education is an advantage
- Preferably min. 5 years experience in piping (design) engineering and revamp projects
- Working knowledge of 3D Cad User is prevailing
- Can act as a piping lead in site executed projects
- Is able to lead (junior) designers and act as focal point for external engineering companies
- Has good interpersonal and verbal/written communication skills
- Knowledge of national and international regulations and codes
- Not afraid of height
60
Entry Level Piping Engineer Resume Examples & Samples
- BS or MS in an engineering discipline required, Mechanical engineering is preferred
- 0-2 years of experience required
- Experience with SmartPlant Reference Database (SPRD) is preferred
- Basic Microsoft office skills are required (Word, Excel, etc.)
- Basic CAD (AutoCAD/Microstation) skills preferred
- Organized, Customer focused, Good communicator and a good Team-worker
61
Piping Engineer Resume Examples & Samples
- Setup and implement a quality plan for the project and report
- A minimum of 5 years of experience in piping layout design for oil and gas and petrochemical projects
- Expert in International/Domestic piping codes and Standards
- Must be able to communicate well within the team as well as with other discipline personnel
- Must be a self-starter, shall be able to foresee problems, and possess the commitment to meet tight schedules with quality
62
Intermediate Piping Engineer Resume Examples & Samples
- Piping code review and interpretation, designs and analyzes piping and pipe supports (including formal pipe stress analysis), prepares technical reports, prepares technical requisitions, and reviews detailed design drawings
- Works together with other members of the piping team, and with other engineering disciplines, through work development; investigates, advises and resolves design and field engineering problems
- Takes an active role problem analysis, solution development, and implementation of corrective actions
- Supports procurement, fabrication, and construction efforts including through bid evaluations, communication with suppliers, documentation review, and support to offshore execution
- Participates in engineering and capital cost estimating
- Works to assure compliance with project schedules and control estimates
- Provides support as required
- Supports company objectives pertaining to quality, health, safety, security, and the environment
- Bachelor Degree in Engineering (Mechanical)
- Minimum of 5 years of relevant piping experience
- Knowledge of pressure piping design codes and standards with specific knowledge of related CSA, ASME, API and DNV specifications and standards
- Trained in Caesar II pipe stress analysis software, and having 3 year’s experience in its use, along with experience in associated tools and methods
- Competency in selection of piping components such as: valves, flanges, adapters, welded interfaces, elbows, bolting, sealing interfaces, gaskets, pipe support hardware
- Knowledge of instrumentation and structural design codes with respect to piping interfaces
- Collaboration - Fosters open dialogue with all project parties, solicits feedback from others. Offers and seeks expertise and support freely
- Accountability - Takes personal responsibility and ownership, fulfills commitments, learns from mistakes
- Proactive - Exhibits initiative, energy and foresight in evaluating and responding promptly to challenging situations, problems and opportunities for improvement within projects
- Must be eligible for registration as a Professional Engineer in the province of Newfoundland and Labrador
63
Senior Piping Engineer Resume Examples & Samples
- Piping material specification production
- Piping fabrication, installation, inspection and testing
- Valve / SP item data sheets production
- Material requisition production
- Technical bid analysis of piping supplier quotations
- Pipe stress analysis using Caesar II software
64
Piping Engineer Resume Examples & Samples
- Minimum of eight years in design experience with engineering firms or with design & site engineering offices
- Knowledge of Caesar II stress analysis software
- Conversant in ASME B31.3 code
- Performing pressure calculations for hot taps
- Knowledgeable of various grades of piping and plate materials for both CS and SS
- Capable of writing narrative scopes of work
65
Piping Engineer Resume Examples & Samples
- Applies Global Project Methodology (Global Project Methodology) and Discipline Engineering Work Process Discipline
- Drives project execution within their discipline
- Provides input to project schedule and plans, then monitors progress against the plan
- Ensure discipline design deliverables for their discipline meet the needs of the project: functions as intended, on time and within budget
- A minimum of 8+years of industry relevant experience
- Experience in all project phases (definition, design, construction, and start up) is required
- Experience working in a role within GPM, or equivalent Project Management Methodology experience (project execution work processes and has detailed understanding of the deliverables for their discipline)
- Six Sigma Green Belt Project Leader or Black Belt Certification
- Experience in several process technologies/varying businesses
- Construction, Operations and/or Commissioning and start-up experience
- Experience working w/ Engineering, Procurement and Construction (EPC) suppliers and vendors
66
Lead Piping Engineer Resume Examples & Samples
- Graduate of a recognized university or technology institute with a bachelor degree in Mechanical Engineering discipline (LNG / Refinery / Petrochemical / Chemical / Power) or equivalent
- 12 years minimum experience in engineering field, preferably with EPC experience
- 8 years minimum of progressive professional project engineering or discipline engineering experience in the oil and gas or related industry
- Experience with piping systems and stress analysis (e.g. high pressure steam, cryogenic systems, hot oil systems, etc)
- Expertise in piping design and material selection in accordance with oil and gas standards
- Working knowledge of oil and gas industry codes and standards, including but not limited to CSA, ASME, and API
- Knowledge of Plot Plan / Equipment Layout development, Piping Layout, Piping Materials, piping Stress Analysis and 3D Computer Aided Design like PDS / PDMS / SP 3D etc
- Familiarity of international codes and practices
- Knowledge of appropriate construction methods
- Willingness to temporarily travel/transfer to an offsite location during the fabrication phase
- Direct construction, pipe fabrication and industrial plant commissioning experience is strongly preferred
67
Piping Engineer Resume Examples & Samples
- Performs plant and piping design activities as a member of taskforce under guidance provided by the leader and cooperate with multi-discipline designers
- Assists in the generation of proposals, scopes, schedules and budgets for projects
- 5+ years of piping engineering/design experience in chemical industry,
- 5+ years of 3D Modeling experience ( in at least one of the 3D tools: SP3D, CADWorx),
- Experience with Laser Scan generated point clouds will be an advantage,
- Knowledgeable in Navisworks based reviews and clash detection,
- Experience in Stress analysis (L1 SEP,L2 Simplified)
- Experience in equipment layout, piping design and pipe supports,
- Knowledge of piping specific design standards (minimum US/EU),
- Willingness to learn about Semiconductor
68
Piping Engineer s Senior Assistant Resume Examples & Samples
- Performs plant and piping design activities as a member of taskforce under guidence provided by the leader and cooperate with multi-discipline designers
- Performs plant and piping design work in the 3D integrated design systems (SP3D, CADWorx3D),
- Performs self-quality review check for 3D modeling and piping deliverables
- Assists in the generation of proposals, scopes, schedules and budgets for projects,
- 3-5 years of piping engineering/design experience in chemical industry,
- 3-5 years of 3D Modeling experience ( in at least one of the 3D tools: SP3D, CADWorx),
- Understanding of importance of Stress Analysis (L1 SEP,L2 Simplified),
- Fundamental knowledge of different types of pipe supports,
- Very good skills in CAD software (AutoCAD) and MS office suite (Word, Excel),
- Good English level - written and spoken,
- Willingness to learn about Semiconductor,
69
Senior Piping Engineer Resume Examples & Samples
- Oversees a team of less experienced piping designers,
- Supervises, trains, and mentors less experienced designers
- Independently leads plant design activities as an area leader and cooperate with multi-discipline designers
- Performs plant and piping design work across several engineering disciplines in the 3D integrated design systems (PDS, SP3D, CADWorx),
- Introduce and perform quality review check for 3D modeling and piping deliverables
- Participates in design reviews, risk assessments, and vendor bid evaluations
- Develops designer man-hour estimates for piping discipline,
- 15+ years of engineering/design experience
- 10+ years of 3D Modeling experience ( in at least one of the 3D tools: PDS, SP3D, CADWorx),
- Flexibility for travel to other location will be appreciated in moderate time frame,
70
Piping Engineer Resume Examples & Samples
- Preparation of project related standards and job notes
- Attend co-ordination meetings and engineering review meetings with suppliers as required
- Review document requirements and issue dates for major equipment with suppliers and assist Procurement Department in compiling a Suppliers' Document Index
- Assist Procurement Department with the expediting of supplier documents
- Give guidance to Client, Project Engineers, other Specialist Engineers and Inspectors on piping engineering matters. Review piping aspects of package unit suppliers' rawings, as requested by the Engineer responsible for the equipment
- Advise the Chief Piping Engineer of any technical problems and unresolved differences with other groups
- Co-ordinate with Procurement Department and ensure that certified drawings are available in time to meet the engineering schedules
- Provide monthly progress report information to the Piping Section Manager
- Suggest ways to improve efficiency, costs and service in the execution of projects
- Perform any other duties assigned by the Piping Section Manager
- Qualified to degree level with 8 years of relevant experience or equivalent
- Bachelor/college degree
- Master of 3D PDS/PDMS and AutoCAD,Microstation
- Experienced in equipment layout and pipe routing
- Good communication and Engilish
71
Piping Engineer Resume Examples & Samples
- Ac as a Senior Piping Engineer during the construction phase of a revamp project
- Will be working out of site engineering office at Ras Tanura
- Answer technical questions from contractors
- Provide technical support as required during the construction phase of the project
- Be available to visit construction site when required. Ensure that work meets all necessary standards and codes
- An Engineering degree in Mechanical or any related degree
- A minimum of 5 years local experience
- Must be familiar with all piping codes and standards relating to process plant work
- Must have construction site support experience and be able to answer technical related questions
- Needs to be a self starter with a proven ability to handle work independently
- Must have good communication skills both oral and written English
72
Piping Engineer Resume Examples & Samples
- Knowledge of Computational Fluid Dynamics (CFD), OLGA flow Assurance, extreme temperature engineering support, vibration mitigation, AFT impulse waterhammer analysis, cathodic protection and various other advanced technologies
- ANSYS Fluent (or equivalent CFD software) for immediate placement. Experience with Autodesk CFD a plus. The successful applicant will be expected to build all 3D models in Autodesk Inventor or AutoCAD 3D. Knowledge of general AutoCAD would be a solid plus
- Expected to perform single-phase liquid transient analysis using AFT Impulse. AFT Impulse experience can be gained on the job, but a solid understanding of fluid flow engineering is required
- This position will be a fast track position to Subject Matter Expert-level within Jacobs
- Interface with clients to present issues and solutions on a regular basis
- Perform manhour estimates and manage personal manhour budgets against approved scope
- Bachelor of Science in Mechanical or Chemical Engineering (accredited university)
- Masters of Science in Mechanical or Chemical Engineering (accredited university)
- Minimum ten (10) years ANSYS Fluent hands-on engineering experience
- Minimum five (5) years Inventor or AutoCAD 3D modeling experience
- Minimum five (5) years Mathcad or Mathcad Prime experience (equivalent experience in Matlab may be considered)
- Experience with Schlumberger OLGA and Impulse AFT a plus
- A minimum of ten (10) years industry experience in fluids is required
- Advanced MS Office skills (Word, Excel, PowerPoint)
